xref: /linux/drivers/net/can/usb/kvaser_usb/kvaser_usb.h (revision 95298d63c67673c654c08952672d016212b26054)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* Parts of this driver are based on the following:
3  *  - Kvaser linux leaf driver (version 4.78)
4  *  - CAN driver for esd CAN-USB/2
5  *  - Kvaser linux usbcanII driver (version 5.3)
6  *  - Kvaser linux mhydra driver (version 5.24)
7  *
8  * Copyright (C) 2002-2018 KVASER AB, Sweden. All rights reserved.
9  * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
10  * Copyright (C) 2012 Olivier Sobrie <olivier@sobrie.be>
11  * Copyright (C) 2015 Valeo S.A.
12  */
13 
14 #ifndef KVASER_USB_H
15 #define KVASER_USB_H
16 
17 /* Kvaser USB CAN dongles are divided into three major platforms:
18  * - Hydra: Running firmware labeled as 'mhydra'
19  * - Leaf: Based on Renesas M32C or Freescale i.MX28, running firmware labeled
20  *         as 'filo'
21  * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios'
22  */
23 
24 #include <linux/completion.h>
25 #include <linux/spinlock.h>
26 #include <linux/types.h>
27 #include <linux/usb.h>
28 
29 #include <linux/can.h>
30 #include <linux/can/dev.h>
31 
32 #define KVASER_USB_MAX_RX_URBS			4
33 #define KVASER_USB_MAX_TX_URBS			128
34 #define KVASER_USB_TIMEOUT			1000 /* msecs */
35 #define KVASER_USB_RX_BUFFER_SIZE		3072
36 #define KVASER_USB_MAX_NET_DEVICES		5
37 
38 /* USB devices features */
39 #define KVASER_USB_HAS_SILENT_MODE		BIT(0)
40 #define KVASER_USB_HAS_TXRX_ERRORS		BIT(1)
41 
42 /* Device capabilities */
43 #define KVASER_USB_CAP_BERR_CAP			0x01
44 #define KVASER_USB_CAP_EXT_CAP			0x02
45 #define KVASER_USB_HYDRA_CAP_EXT_CMD		0x04
46 
47 struct kvaser_usb_dev_cfg;
48 
49 enum kvaser_usb_leaf_family {
50 	KVASER_LEAF,
51 	KVASER_USBCAN,
52 };
53 
54 #define KVASER_USB_HYDRA_MAX_CMD_LEN		128
55 struct kvaser_usb_dev_card_data_hydra {
56 	u8 channel_to_he[KVASER_USB_MAX_NET_DEVICES];
57 	u8 sysdbg_he;
58 	spinlock_t transid_lock; /* lock for transid */
59 	u16 transid;
60 	/* lock for usb_rx_leftover and usb_rx_leftover_len */
61 	spinlock_t usb_rx_leftover_lock;
62 	u8 usb_rx_leftover[KVASER_USB_HYDRA_MAX_CMD_LEN];
63 	u8 usb_rx_leftover_len;
64 };
65 struct kvaser_usb_dev_card_data {
66 	u32 ctrlmode_supported;
67 	u32 capabilities;
68 	union {
69 		struct {
70 			enum kvaser_usb_leaf_family family;
71 		} leaf;
72 		struct kvaser_usb_dev_card_data_hydra hydra;
73 	};
74 };
75 
76 /* Context for an outstanding, not yet ACKed, transmission */
77 struct kvaser_usb_tx_urb_context {
78 	struct kvaser_usb_net_priv *priv;
79 	u32 echo_index;
80 	int dlc;
81 };
82 
83 struct kvaser_usb {
84 	struct usb_device *udev;
85 	struct usb_interface *intf;
86 	struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES];
87 	const struct kvaser_usb_dev_ops *ops;
88 	const struct kvaser_usb_dev_cfg *cfg;
89 
90 	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
91 	struct usb_anchor rx_submitted;
92 
93 	/* @max_tx_urbs: Firmware-reported maximum number of outstanding,
94 	 * not yet ACKed, transmissions on this device. This value is
95 	 * also used as a sentinel for marking free tx contexts.
96 	 */
97 	u32 fw_version;
98 	unsigned int nchannels;
99 	unsigned int max_tx_urbs;
100 	struct kvaser_usb_dev_card_data card_data;
101 
102 	bool rxinitdone;
103 	void *rxbuf[KVASER_USB_MAX_RX_URBS];
104 	dma_addr_t rxbuf_dma[KVASER_USB_MAX_RX_URBS];
105 };
106 
107 struct kvaser_usb_net_priv {
108 	struct can_priv can;
109 	struct can_berr_counter bec;
110 
111 	struct kvaser_usb *dev;
112 	struct net_device *netdev;
113 	int channel;
114 
115 	struct completion start_comp, stop_comp, flush_comp;
116 	struct usb_anchor tx_submitted;
117 
118 	spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */
119 	int active_tx_contexts;
120 	struct kvaser_usb_tx_urb_context tx_contexts[];
121 };
122 
123 /**
124  * struct kvaser_usb_dev_ops - Device specific functions
125  * @dev_set_mode:		used for can.do_set_mode
126  * @dev_set_bittiming:		used for can.do_set_bittiming
127  * @dev_set_data_bittiming:	used for can.do_set_data_bittiming
128  * @dev_get_berr_counter:	used for can.do_get_berr_counter
129  *
130  * @dev_setup_endpoints:	setup USB in and out endpoints
131  * @dev_init_card:		initialize card
132  * @dev_get_software_info:	get software info
133  * @dev_get_software_details:	get software details
134  * @dev_get_card_info:		get card info
135  * @dev_get_capabilities:	discover device capabilities
136  *
137  * @dev_set_opt_mode:		set ctrlmod
138  * @dev_start_chip:		start the CAN controller
139  * @dev_stop_chip:		stop the CAN controller
140  * @dev_reset_chip:		reset the CAN controller
141  * @dev_flush_queue:		flush outstanding CAN messages
142  * @dev_read_bulk_callback:	handle incoming commands
143  * @dev_frame_to_cmd:		translate struct can_frame into device command
144  */
145 struct kvaser_usb_dev_ops {
146 	int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode);
147 	int (*dev_set_bittiming)(struct net_device *netdev);
148 	int (*dev_set_data_bittiming)(struct net_device *netdev);
149 	int (*dev_get_berr_counter)(const struct net_device *netdev,
150 				    struct can_berr_counter *bec);
151 	int (*dev_setup_endpoints)(struct kvaser_usb *dev);
152 	int (*dev_init_card)(struct kvaser_usb *dev);
153 	int (*dev_get_software_info)(struct kvaser_usb *dev);
154 	int (*dev_get_software_details)(struct kvaser_usb *dev);
155 	int (*dev_get_card_info)(struct kvaser_usb *dev);
156 	int (*dev_get_capabilities)(struct kvaser_usb *dev);
157 	int (*dev_set_opt_mode)(const struct kvaser_usb_net_priv *priv);
158 	int (*dev_start_chip)(struct kvaser_usb_net_priv *priv);
159 	int (*dev_stop_chip)(struct kvaser_usb_net_priv *priv);
160 	int (*dev_reset_chip)(struct kvaser_usb *dev, int channel);
161 	int (*dev_flush_queue)(struct kvaser_usb_net_priv *priv);
162 	void (*dev_read_bulk_callback)(struct kvaser_usb *dev, void *buf,
163 				       int len);
164 	void *(*dev_frame_to_cmd)(const struct kvaser_usb_net_priv *priv,
165 				  const struct sk_buff *skb, int *frame_len,
166 				  int *cmd_len, u16 transid);
167 };
168 
169 struct kvaser_usb_dev_cfg {
170 	const struct can_clock clock;
171 	const unsigned int timestamp_freq;
172 	const struct can_bittiming_const * const bittiming_const;
173 	const struct can_bittiming_const * const data_bittiming_const;
174 };
175 
176 extern const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops;
177 extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
178 
179 int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
180 			int *actual_len);
181 
182 int kvaser_usb_send_cmd(const struct kvaser_usb *dev, void *cmd, int len);
183 
184 int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
185 			      int len);
186 
187 int kvaser_usb_can_rx_over_error(struct net_device *netdev);
188 #endif /* KVASER_USB_H */
189