1 /* 2 * sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs 3 * 4 * Copyright (C) 2013 Peter Chen 5 * Copyright (C) 2015 Gerhard Bertelsmann 6 * All rights reserved. 7 * 8 * Parts of this software are based on (derived from) the SJA1000 code by: 9 * Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de> 10 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com> 11 * Copyright (C) 2002-2007 Volkswagen Group Electronic Research 12 * Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, 13 * 38106 Braunschweig, GERMANY 14 * 15 * Redistribution and use in source and binary forms, with or without 16 * modification, are permitted provided that the following conditions 17 * are met: 18 * 1. Redistributions of source code must retain the above copyright 19 * notice, this list of conditions and the following disclaimer. 20 * 2. Redistributions in binary form must reproduce the above copyright 21 * notice, this list of conditions and the following disclaimer in the 22 * documentation and/or other materials provided with the distribution. 23 * 3. Neither the name of Volkswagen nor the names of its contributors 24 * may be used to endorse or promote products derived from this software 25 * without specific prior written permission. 26 * 27 * Alternatively, provided that this notice is retained in full, this 28 * software may be distributed under the terms of the GNU General 29 * Public License ("GPL") version 2, in which case the provisions of the 30 * GPL apply INSTEAD OF those given above. 31 * 32 * The provided data structures and external interfaces from this code 33 * are not restricted to be used by modules with a GPL compatible license. 34 * 35 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 36 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 37 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 38 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 39 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 40 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 41 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 42 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 43 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 44 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 45 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 46 * DAMAGE. 47 * 48 */ 49 50 #include <linux/netdevice.h> 51 #include <linux/can.h> 52 #include <linux/can/dev.h> 53 #include <linux/can/error.h> 54 #include <linux/clk.h> 55 #include <linux/delay.h> 56 #include <linux/ethtool.h> 57 #include <linux/interrupt.h> 58 #include <linux/init.h> 59 #include <linux/io.h> 60 #include <linux/module.h> 61 #include <linux/of.h> 62 #include <linux/platform_device.h> 63 #include <linux/reset.h> 64 65 #define DRV_NAME "sun4i_can" 66 67 /* Registers address (physical base address 0x01C2BC00) */ 68 #define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */ 69 #define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */ 70 #define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */ 71 #define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */ 72 #define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */ 73 #define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */ 74 #define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */ 75 #define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */ 76 #define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */ 77 #define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */ 78 #define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */ 79 #define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */ 80 #define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */ 81 #define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */ 82 #define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */ 83 #define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */ 84 #define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */ 85 #define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */ 86 #define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */ 87 #define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */ 88 #define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */ 89 #define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */ 90 #define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */ 91 #define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */ 92 #define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */ 93 #define SUN4I_REG_ACPC_ADDR_D1 0x0028 /* CAN Acceptance Code 0 on the D1 */ 94 #define SUN4I_REG_ACPM_ADDR_D1 0x002C /* CAN Acceptance Mask 0 on the D1 */ 95 #define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */ 96 #define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */ 97 98 /* Controller Register Description */ 99 100 /* mode select register (r/w) 101 * offset:0x0000 default:0x0000_0001 102 */ 103 #define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */ 104 #define SUN4I_MSEL_WAKE_UP (0x00 << 4) 105 #define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */ 106 #define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3) 107 #define SUN4I_MSEL_LOOPBACK_MODE BIT(2) 108 #define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1) 109 #define SUN4I_MSEL_RESET_MODE BIT(0) 110 111 /* command register (w) 112 * offset:0x0004 default:0x0000_0000 113 */ 114 #define SUN4I_CMD_BUS_OFF_REQ BIT(5) 115 #define SUN4I_CMD_SELF_RCV_REQ BIT(4) 116 #define SUN4I_CMD_CLEAR_OR_FLAG BIT(3) 117 #define SUN4I_CMD_RELEASE_RBUF BIT(2) 118 #define SUN4I_CMD_ABORT_REQ BIT(1) 119 #define SUN4I_CMD_TRANS_REQ BIT(0) 120 121 /* status register (r) 122 * offset:0x0008 default:0x0000_003c 123 */ 124 #define SUN4I_STA_BIT_ERR (0x00 << 22) 125 #define SUN4I_STA_FORM_ERR (0x01 << 22) 126 #define SUN4I_STA_STUFF_ERR (0x02 << 22) 127 #define SUN4I_STA_OTHER_ERR (0x03 << 22) 128 #define SUN4I_STA_MASK_ERR (0x03 << 22) 129 #define SUN4I_STA_ERR_DIR BIT(21) 130 #define SUN4I_STA_ERR_SEG_CODE (0x1f << 16) 131 #define SUN4I_STA_START (0x03 << 16) 132 #define SUN4I_STA_ID28_21 (0x02 << 16) 133 #define SUN4I_STA_ID20_18 (0x06 << 16) 134 #define SUN4I_STA_SRTR (0x04 << 16) 135 #define SUN4I_STA_IDE (0x05 << 16) 136 #define SUN4I_STA_ID17_13 (0x07 << 16) 137 #define SUN4I_STA_ID12_5 (0x0f << 16) 138 #define SUN4I_STA_ID4_0 (0x0e << 16) 139 #define SUN4I_STA_RTR (0x0c << 16) 140 #define SUN4I_STA_RB1 (0x0d << 16) 141 #define SUN4I_STA_RB0 (0x09 << 16) 142 #define SUN4I_STA_DLEN (0x0b << 16) 143 #define SUN4I_STA_DATA_FIELD (0x0a << 16) 144 #define SUN4I_STA_CRC_SEQUENCE (0x08 << 16) 145 #define SUN4I_STA_CRC_DELIMITER (0x18 << 16) 146 #define SUN4I_STA_ACK (0x19 << 16) 147 #define SUN4I_STA_ACK_DELIMITER (0x1b << 16) 148 #define SUN4I_STA_END (0x1a << 16) 149 #define SUN4I_STA_INTERMISSION (0x12 << 16) 150 #define SUN4I_STA_ACTIVE_ERROR (0x11 << 16) 151 #define SUN4I_STA_PASSIVE_ERROR (0x16 << 16) 152 #define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16) 153 #define SUN4I_STA_ERROR_DELIMITER (0x17 << 16) 154 #define SUN4I_STA_OVERLOAD (0x1c << 16) 155 #define SUN4I_STA_BUS_OFF BIT(7) 156 #define SUN4I_STA_ERR_STA BIT(6) 157 #define SUN4I_STA_TRANS_BUSY BIT(5) 158 #define SUN4I_STA_RCV_BUSY BIT(4) 159 #define SUN4I_STA_TRANS_OVER BIT(3) 160 #define SUN4I_STA_TBUF_RDY BIT(2) 161 #define SUN4I_STA_DATA_ORUN BIT(1) 162 #define SUN4I_STA_RBUF_RDY BIT(0) 163 164 /* interrupt register (r) 165 * offset:0x000c default:0x0000_0000 166 */ 167 #define SUN4I_INT_BUS_ERR BIT(7) 168 #define SUN4I_INT_ARB_LOST BIT(6) 169 #define SUN4I_INT_ERR_PASSIVE BIT(5) 170 #define SUN4I_INT_WAKEUP BIT(4) 171 #define SUN4I_INT_DATA_OR BIT(3) 172 #define SUN4I_INT_ERR_WRN BIT(2) 173 #define SUN4I_INT_TBUF_VLD BIT(1) 174 #define SUN4I_INT_RBUF_VLD BIT(0) 175 176 /* interrupt enable register (r/w) 177 * offset:0x0010 default:0x0000_0000 178 */ 179 #define SUN4I_INTEN_BERR BIT(7) 180 #define SUN4I_INTEN_ARB_LOST BIT(6) 181 #define SUN4I_INTEN_ERR_PASSIVE BIT(5) 182 #define SUN4I_INTEN_WAKEUP BIT(4) 183 #define SUN4I_INTEN_OR BIT(3) 184 #define SUN4I_INTEN_ERR_WRN BIT(2) 185 #define SUN4I_INTEN_TX BIT(1) 186 #define SUN4I_INTEN_RX BIT(0) 187 188 /* error code */ 189 #define SUN4I_ERR_INRCV (0x1 << 5) 190 #define SUN4I_ERR_INTRANS (0x0 << 5) 191 192 /* filter mode */ 193 #define SUN4I_FILTER_CLOSE 0 194 #define SUN4I_SINGLE_FLTER_MODE 1 195 #define SUN4I_DUAL_FILTER_MODE 2 196 197 /* message buffer flags */ 198 #define SUN4I_MSG_EFF_FLAG BIT(7) 199 #define SUN4I_MSG_RTR_FLAG BIT(6) 200 201 /* max. number of interrupts handled in ISR */ 202 #define SUN4I_CAN_MAX_IRQ 20 203 #define SUN4I_MODE_MAX_RETRIES 100 204 205 /** 206 * struct sun4ican_quirks - Differences between SoC variants. 207 * 208 * @has_reset: SoC needs reset deasserted. 209 * @acp_offset: Offset of ACPC and ACPM registers 210 */ 211 struct sun4ican_quirks { 212 bool has_reset; 213 int acp_offset; 214 }; 215 216 struct sun4ican_priv { 217 struct can_priv can; 218 void __iomem *base; 219 struct clk *clk; 220 struct reset_control *reset; 221 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */ 222 int acp_offset; 223 }; 224 225 static const struct can_bittiming_const sun4ican_bittiming_const = { 226 .name = DRV_NAME, 227 .tseg1_min = 1, 228 .tseg1_max = 16, 229 .tseg2_min = 1, 230 .tseg2_max = 8, 231 .sjw_max = 4, 232 .brp_min = 1, 233 .brp_max = 64, 234 .brp_inc = 1, 235 }; 236 237 static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val) 238 { 239 unsigned long flags; 240 241 spin_lock_irqsave(&priv->cmdreg_lock, flags); 242 writel(val, priv->base + SUN4I_REG_CMD_ADDR); 243 spin_unlock_irqrestore(&priv->cmdreg_lock, flags); 244 } 245 246 static int set_normal_mode(struct net_device *dev) 247 { 248 struct sun4ican_priv *priv = netdev_priv(dev); 249 int retry = SUN4I_MODE_MAX_RETRIES; 250 u32 mod_reg_val = 0; 251 252 do { 253 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR); 254 mod_reg_val &= ~SUN4I_MSEL_RESET_MODE; 255 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR); 256 } while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE)); 257 258 if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) { 259 netdev_err(dev, 260 "setting controller into normal mode failed!\n"); 261 return -ETIMEDOUT; 262 } 263 264 return 0; 265 } 266 267 static int set_reset_mode(struct net_device *dev) 268 { 269 struct sun4ican_priv *priv = netdev_priv(dev); 270 int retry = SUN4I_MODE_MAX_RETRIES; 271 u32 mod_reg_val = 0; 272 273 do { 274 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR); 275 mod_reg_val |= SUN4I_MSEL_RESET_MODE; 276 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR); 277 } while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE)); 278 279 if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) & 280 SUN4I_MSEL_RESET_MODE)) { 281 netdev_err(dev, "setting controller into reset mode failed!\n"); 282 return -ETIMEDOUT; 283 } 284 285 return 0; 286 } 287 288 /* bittiming is called in reset_mode only */ 289 static int sun4ican_set_bittiming(struct net_device *dev) 290 { 291 struct sun4ican_priv *priv = netdev_priv(dev); 292 struct can_bittiming *bt = &priv->can.bittiming; 293 u32 cfg; 294 295 cfg = ((bt->brp - 1) & 0x3FF) | 296 (((bt->sjw - 1) & 0x3) << 14) | 297 (((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) | 298 (((bt->phase_seg2 - 1) & 0x7) << 20); 299 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) 300 cfg |= 0x800000; 301 302 netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg); 303 writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR); 304 305 return 0; 306 } 307 308 static int sun4ican_get_berr_counter(const struct net_device *dev, 309 struct can_berr_counter *bec) 310 { 311 struct sun4ican_priv *priv = netdev_priv(dev); 312 u32 errors; 313 int err; 314 315 err = clk_prepare_enable(priv->clk); 316 if (err) { 317 netdev_err(dev, "could not enable clock\n"); 318 return err; 319 } 320 321 errors = readl(priv->base + SUN4I_REG_ERRC_ADDR); 322 323 bec->txerr = errors & 0xFF; 324 bec->rxerr = (errors >> 16) & 0xFF; 325 326 clk_disable_unprepare(priv->clk); 327 328 return 0; 329 } 330 331 static int sun4i_can_start(struct net_device *dev) 332 { 333 struct sun4ican_priv *priv = netdev_priv(dev); 334 int err; 335 u32 mod_reg_val; 336 337 /* we need to enter the reset mode */ 338 err = set_reset_mode(dev); 339 if (err) { 340 netdev_err(dev, "could not enter reset mode\n"); 341 return err; 342 } 343 344 /* set filters - we accept all */ 345 writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR + priv->acp_offset); 346 writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR + priv->acp_offset); 347 348 /* clear error counters and error code capture */ 349 writel(0, priv->base + SUN4I_REG_ERRC_ADDR); 350 351 /* enable interrupts */ 352 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) 353 writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR); 354 else 355 writel(0xFF & ~SUN4I_INTEN_BERR, 356 priv->base + SUN4I_REG_INTEN_ADDR); 357 358 /* enter the selected mode */ 359 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR); 360 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) 361 mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE; 362 else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) 363 mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE; 364 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR); 365 366 err = sun4ican_set_bittiming(dev); 367 if (err) 368 return err; 369 370 /* we are ready to enter the normal mode */ 371 err = set_normal_mode(dev); 372 if (err) { 373 netdev_err(dev, "could not enter normal mode\n"); 374 return err; 375 } 376 377 priv->can.state = CAN_STATE_ERROR_ACTIVE; 378 379 return 0; 380 } 381 382 static int sun4i_can_stop(struct net_device *dev) 383 { 384 struct sun4ican_priv *priv = netdev_priv(dev); 385 int err; 386 387 priv->can.state = CAN_STATE_STOPPED; 388 /* we need to enter reset mode */ 389 err = set_reset_mode(dev); 390 if (err) { 391 netdev_err(dev, "could not enter reset mode\n"); 392 return err; 393 } 394 395 /* disable all interrupts */ 396 writel(0, priv->base + SUN4I_REG_INTEN_ADDR); 397 398 return 0; 399 } 400 401 static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode) 402 { 403 int err; 404 405 switch (mode) { 406 case CAN_MODE_START: 407 err = sun4i_can_start(dev); 408 if (err) { 409 netdev_err(dev, "starting CAN controller failed!\n"); 410 return err; 411 } 412 if (netif_queue_stopped(dev)) 413 netif_wake_queue(dev); 414 break; 415 416 default: 417 return -EOPNOTSUPP; 418 } 419 return 0; 420 } 421 422 /* transmit a CAN message 423 * message layout in the sk_buff should be like this: 424 * xx xx xx xx ff ll 00 11 22 33 44 55 66 77 425 * [ can_id ] [flags] [len] [can data (up to 8 bytes] 426 */ 427 static netdev_tx_t sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev) 428 { 429 struct sun4ican_priv *priv = netdev_priv(dev); 430 struct can_frame *cf = (struct can_frame *)skb->data; 431 u8 dlc; 432 u32 dreg, msg_flag_n; 433 canid_t id; 434 int i; 435 436 if (can_dev_dropped_skb(dev, skb)) 437 return NETDEV_TX_OK; 438 439 netif_stop_queue(dev); 440 441 id = cf->can_id; 442 dlc = cf->len; 443 msg_flag_n = dlc; 444 445 if (id & CAN_RTR_FLAG) 446 msg_flag_n |= SUN4I_MSG_RTR_FLAG; 447 448 if (id & CAN_EFF_FLAG) { 449 msg_flag_n |= SUN4I_MSG_EFF_FLAG; 450 dreg = SUN4I_REG_BUF5_ADDR; 451 writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR); 452 writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR); 453 writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR); 454 writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR); 455 } else { 456 dreg = SUN4I_REG_BUF3_ADDR; 457 writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR); 458 writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR); 459 } 460 461 for (i = 0; i < dlc; i++) 462 writel(cf->data[i], priv->base + (dreg + i * 4)); 463 464 writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR); 465 466 can_put_echo_skb(skb, dev, 0, 0); 467 468 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) 469 sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ); 470 else 471 sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ); 472 473 return NETDEV_TX_OK; 474 } 475 476 static void sun4i_can_rx(struct net_device *dev) 477 { 478 struct sun4ican_priv *priv = netdev_priv(dev); 479 struct net_device_stats *stats = &dev->stats; 480 struct can_frame *cf; 481 struct sk_buff *skb; 482 u8 fi; 483 u32 dreg; 484 canid_t id; 485 int i; 486 487 /* create zero'ed CAN frame buffer */ 488 skb = alloc_can_skb(dev, &cf); 489 if (!skb) 490 return; 491 492 fi = readl(priv->base + SUN4I_REG_BUF0_ADDR); 493 cf->len = can_cc_dlc2len(fi & 0x0F); 494 if (fi & SUN4I_MSG_EFF_FLAG) { 495 dreg = SUN4I_REG_BUF5_ADDR; 496 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) | 497 (readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) | 498 (readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) | 499 ((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f); 500 id |= CAN_EFF_FLAG; 501 } else { 502 dreg = SUN4I_REG_BUF3_ADDR; 503 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) | 504 ((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7); 505 } 506 507 /* remote frame ? */ 508 if (fi & SUN4I_MSG_RTR_FLAG) { 509 id |= CAN_RTR_FLAG; 510 } else { 511 for (i = 0; i < cf->len; i++) 512 cf->data[i] = readl(priv->base + dreg + i * 4); 513 514 stats->rx_bytes += cf->len; 515 } 516 stats->rx_packets++; 517 518 cf->can_id = id; 519 520 sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF); 521 522 netif_rx(skb); 523 } 524 525 static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status) 526 { 527 struct sun4ican_priv *priv = netdev_priv(dev); 528 struct net_device_stats *stats = &dev->stats; 529 struct can_frame *cf; 530 struct sk_buff *skb; 531 enum can_state state = priv->can.state; 532 enum can_state rx_state, tx_state; 533 unsigned int rxerr, txerr, errc; 534 u32 ecc, alc; 535 536 /* we don't skip if alloc fails because we want the stats anyhow */ 537 skb = alloc_can_err_skb(dev, &cf); 538 539 errc = readl(priv->base + SUN4I_REG_ERRC_ADDR); 540 rxerr = (errc >> 16) & 0xFF; 541 txerr = errc & 0xFF; 542 543 if (isrc & SUN4I_INT_DATA_OR) { 544 /* data overrun interrupt */ 545 netdev_dbg(dev, "data overrun interrupt\n"); 546 if (likely(skb)) { 547 cf->can_id |= CAN_ERR_CRTL; 548 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; 549 } 550 stats->rx_over_errors++; 551 stats->rx_errors++; 552 553 /* reset the CAN IP by entering reset mode 554 * ignoring timeout error 555 */ 556 set_reset_mode(dev); 557 set_normal_mode(dev); 558 559 /* clear bit */ 560 sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG); 561 } 562 if (isrc & SUN4I_INT_ERR_WRN) { 563 /* error warning interrupt */ 564 netdev_dbg(dev, "error warning interrupt\n"); 565 566 if (status & SUN4I_STA_BUS_OFF) 567 state = CAN_STATE_BUS_OFF; 568 else if (status & SUN4I_STA_ERR_STA) 569 state = CAN_STATE_ERROR_WARNING; 570 else 571 state = CAN_STATE_ERROR_ACTIVE; 572 } 573 if (skb && state != CAN_STATE_BUS_OFF) { 574 cf->can_id |= CAN_ERR_CNT; 575 cf->data[6] = txerr; 576 cf->data[7] = rxerr; 577 } 578 if (isrc & SUN4I_INT_BUS_ERR) { 579 /* bus error interrupt */ 580 netdev_dbg(dev, "bus error interrupt\n"); 581 priv->can.can_stats.bus_error++; 582 stats->rx_errors++; 583 584 if (likely(skb)) { 585 ecc = readl(priv->base + SUN4I_REG_STA_ADDR); 586 587 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; 588 589 switch (ecc & SUN4I_STA_MASK_ERR) { 590 case SUN4I_STA_BIT_ERR: 591 cf->data[2] |= CAN_ERR_PROT_BIT; 592 break; 593 case SUN4I_STA_FORM_ERR: 594 cf->data[2] |= CAN_ERR_PROT_FORM; 595 break; 596 case SUN4I_STA_STUFF_ERR: 597 cf->data[2] |= CAN_ERR_PROT_STUFF; 598 break; 599 default: 600 cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE) 601 >> 16; 602 break; 603 } 604 /* error occurred during transmission? */ 605 if ((ecc & SUN4I_STA_ERR_DIR) == 0) 606 cf->data[2] |= CAN_ERR_PROT_TX; 607 } 608 } 609 if (isrc & SUN4I_INT_ERR_PASSIVE) { 610 /* error passive interrupt */ 611 netdev_dbg(dev, "error passive interrupt\n"); 612 if (state == CAN_STATE_ERROR_PASSIVE) 613 state = CAN_STATE_ERROR_WARNING; 614 else 615 state = CAN_STATE_ERROR_PASSIVE; 616 } 617 if (isrc & SUN4I_INT_ARB_LOST) { 618 /* arbitration lost interrupt */ 619 netdev_dbg(dev, "arbitration lost interrupt\n"); 620 alc = readl(priv->base + SUN4I_REG_STA_ADDR); 621 priv->can.can_stats.arbitration_lost++; 622 if (likely(skb)) { 623 cf->can_id |= CAN_ERR_LOSTARB; 624 cf->data[0] = (alc >> 8) & 0x1f; 625 } 626 } 627 628 if (state != priv->can.state) { 629 tx_state = txerr >= rxerr ? state : 0; 630 rx_state = txerr <= rxerr ? state : 0; 631 632 if (likely(skb)) 633 can_change_state(dev, cf, tx_state, rx_state); 634 else 635 priv->can.state = state; 636 if (state == CAN_STATE_BUS_OFF) 637 can_bus_off(dev); 638 } 639 640 if (likely(skb)) 641 netif_rx(skb); 642 else 643 return -ENOMEM; 644 645 return 0; 646 } 647 648 static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id) 649 { 650 struct net_device *dev = (struct net_device *)dev_id; 651 struct sun4ican_priv *priv = netdev_priv(dev); 652 struct net_device_stats *stats = &dev->stats; 653 u8 isrc, status; 654 int n = 0; 655 656 while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) && 657 (n < SUN4I_CAN_MAX_IRQ)) { 658 n++; 659 status = readl(priv->base + SUN4I_REG_STA_ADDR); 660 661 if (isrc & SUN4I_INT_WAKEUP) 662 netdev_warn(dev, "wakeup interrupt\n"); 663 664 if (isrc & SUN4I_INT_TBUF_VLD) { 665 /* transmission complete interrupt */ 666 stats->tx_bytes += can_get_echo_skb(dev, 0, NULL); 667 stats->tx_packets++; 668 netif_wake_queue(dev); 669 } 670 if ((isrc & SUN4I_INT_RBUF_VLD) && 671 !(isrc & SUN4I_INT_DATA_OR)) { 672 /* receive interrupt - don't read if overrun occurred */ 673 while (status & SUN4I_STA_RBUF_RDY) { 674 /* RX buffer is not empty */ 675 sun4i_can_rx(dev); 676 status = readl(priv->base + SUN4I_REG_STA_ADDR); 677 } 678 } 679 if (isrc & 680 (SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR | 681 SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) { 682 /* error interrupt */ 683 if (sun4i_can_err(dev, isrc, status)) 684 netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n"); 685 } 686 /* clear interrupts */ 687 writel(isrc, priv->base + SUN4I_REG_INT_ADDR); 688 readl(priv->base + SUN4I_REG_INT_ADDR); 689 } 690 if (n >= SUN4I_CAN_MAX_IRQ) 691 netdev_dbg(dev, "%d messages handled in ISR", n); 692 693 return (n) ? IRQ_HANDLED : IRQ_NONE; 694 } 695 696 static int sun4ican_open(struct net_device *dev) 697 { 698 struct sun4ican_priv *priv = netdev_priv(dev); 699 int err; 700 701 /* common open */ 702 err = open_candev(dev); 703 if (err) 704 return err; 705 706 /* register interrupt handler */ 707 err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev); 708 if (err) { 709 netdev_err(dev, "request_irq err: %d\n", err); 710 goto exit_irq; 711 } 712 713 /* software reset deassert */ 714 err = reset_control_deassert(priv->reset); 715 if (err) { 716 netdev_err(dev, "could not deassert CAN reset\n"); 717 goto exit_soft_reset; 718 } 719 720 /* turn on clocking for CAN peripheral block */ 721 err = clk_prepare_enable(priv->clk); 722 if (err) { 723 netdev_err(dev, "could not enable CAN peripheral clock\n"); 724 goto exit_clock; 725 } 726 727 err = sun4i_can_start(dev); 728 if (err) { 729 netdev_err(dev, "could not start CAN peripheral\n"); 730 goto exit_can_start; 731 } 732 733 netif_start_queue(dev); 734 735 return 0; 736 737 exit_can_start: 738 clk_disable_unprepare(priv->clk); 739 exit_clock: 740 reset_control_assert(priv->reset); 741 exit_soft_reset: 742 free_irq(dev->irq, dev); 743 exit_irq: 744 close_candev(dev); 745 return err; 746 } 747 748 static int sun4ican_close(struct net_device *dev) 749 { 750 struct sun4ican_priv *priv = netdev_priv(dev); 751 752 netif_stop_queue(dev); 753 sun4i_can_stop(dev); 754 clk_disable_unprepare(priv->clk); 755 reset_control_assert(priv->reset); 756 757 free_irq(dev->irq, dev); 758 close_candev(dev); 759 760 return 0; 761 } 762 763 static const struct net_device_ops sun4ican_netdev_ops = { 764 .ndo_open = sun4ican_open, 765 .ndo_stop = sun4ican_close, 766 .ndo_start_xmit = sun4ican_start_xmit, 767 }; 768 769 static const struct ethtool_ops sun4ican_ethtool_ops = { 770 .get_ts_info = ethtool_op_get_ts_info, 771 }; 772 773 static const struct sun4ican_quirks sun4ican_quirks_a10 = { 774 .has_reset = false, 775 .acp_offset = 0, 776 }; 777 778 static const struct sun4ican_quirks sun4ican_quirks_r40 = { 779 .has_reset = true, 780 .acp_offset = 0, 781 }; 782 783 static const struct sun4ican_quirks sun4ican_quirks_d1 = { 784 .has_reset = true, 785 .acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR), 786 }; 787 788 static const struct of_device_id sun4ican_of_match[] = { 789 { 790 .compatible = "allwinner,sun4i-a10-can", 791 .data = &sun4ican_quirks_a10 792 }, { 793 .compatible = "allwinner,sun7i-a20-can", 794 .data = &sun4ican_quirks_a10 795 }, { 796 .compatible = "allwinner,sun8i-r40-can", 797 .data = &sun4ican_quirks_r40 798 }, { 799 .compatible = "allwinner,sun20i-d1-can", 800 .data = &sun4ican_quirks_d1 801 }, { 802 /* sentinel */ 803 }, 804 }; 805 806 MODULE_DEVICE_TABLE(of, sun4ican_of_match); 807 808 static void sun4ican_remove(struct platform_device *pdev) 809 { 810 struct net_device *dev = platform_get_drvdata(pdev); 811 812 unregister_netdev(dev); 813 free_candev(dev); 814 } 815 816 static int sun4ican_probe(struct platform_device *pdev) 817 { 818 struct device_node *np = pdev->dev.of_node; 819 struct clk *clk; 820 struct reset_control *reset = NULL; 821 void __iomem *addr; 822 int err, irq; 823 struct net_device *dev; 824 struct sun4ican_priv *priv; 825 const struct sun4ican_quirks *quirks; 826 827 quirks = of_device_get_match_data(&pdev->dev); 828 if (!quirks) { 829 dev_err(&pdev->dev, "failed to determine the quirks to use\n"); 830 err = -ENODEV; 831 goto exit; 832 } 833 834 if (quirks->has_reset) { 835 reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); 836 if (IS_ERR(reset)) { 837 dev_err(&pdev->dev, "unable to request reset\n"); 838 err = PTR_ERR(reset); 839 goto exit; 840 } 841 } 842 843 clk = of_clk_get(np, 0); 844 if (IS_ERR(clk)) { 845 dev_err(&pdev->dev, "unable to request clock\n"); 846 err = -ENODEV; 847 goto exit; 848 } 849 850 irq = platform_get_irq(pdev, 0); 851 if (irq < 0) { 852 err = -ENODEV; 853 goto exit; 854 } 855 856 addr = devm_platform_ioremap_resource(pdev, 0); 857 if (IS_ERR(addr)) { 858 err = PTR_ERR(addr); 859 goto exit; 860 } 861 862 dev = alloc_candev(sizeof(struct sun4ican_priv), 1); 863 if (!dev) { 864 dev_err(&pdev->dev, 865 "could not allocate memory for CAN device\n"); 866 err = -ENOMEM; 867 goto exit; 868 } 869 870 dev->netdev_ops = &sun4ican_netdev_ops; 871 dev->ethtool_ops = &sun4ican_ethtool_ops; 872 dev->irq = irq; 873 dev->flags |= IFF_ECHO; 874 875 priv = netdev_priv(dev); 876 priv->can.clock.freq = clk_get_rate(clk); 877 priv->can.bittiming_const = &sun4ican_bittiming_const; 878 priv->can.do_set_mode = sun4ican_set_mode; 879 priv->can.do_get_berr_counter = sun4ican_get_berr_counter; 880 priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING | 881 CAN_CTRLMODE_LISTENONLY | 882 CAN_CTRLMODE_LOOPBACK | 883 CAN_CTRLMODE_3_SAMPLES; 884 priv->base = addr; 885 priv->clk = clk; 886 priv->reset = reset; 887 priv->acp_offset = quirks->acp_offset; 888 spin_lock_init(&priv->cmdreg_lock); 889 890 platform_set_drvdata(pdev, dev); 891 SET_NETDEV_DEV(dev, &pdev->dev); 892 893 err = register_candev(dev); 894 if (err) { 895 dev_err(&pdev->dev, "registering %s failed (err=%d)\n", 896 DRV_NAME, err); 897 goto exit_free; 898 } 899 900 dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n", 901 priv->base, dev->irq); 902 903 return 0; 904 905 exit_free: 906 free_candev(dev); 907 exit: 908 return err; 909 } 910 911 static struct platform_driver sun4i_can_driver = { 912 .driver = { 913 .name = DRV_NAME, 914 .of_match_table = sun4ican_of_match, 915 }, 916 .probe = sun4ican_probe, 917 .remove = sun4ican_remove, 918 }; 919 920 module_platform_driver(sun4i_can_driver); 921 922 MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>"); 923 MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>"); 924 MODULE_LICENSE("Dual BSD/GPL"); 925 MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)"); 926