1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * CAN bus driver for the Freescale MPC5xxx embedded CPU. 4 * 5 * Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>, 6 * Varma Electronics Oy 7 * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> 8 * Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/module.h> 13 #include <linux/interrupt.h> 14 #include <linux/platform_device.h> 15 #include <linux/netdevice.h> 16 #include <linux/can/dev.h> 17 #include <linux/of_platform.h> 18 #include <sysdev/fsl_soc.h> 19 #include <linux/clk.h> 20 #include <linux/io.h> 21 #include <asm/mpc52xx.h> 22 23 #include "mscan.h" 24 25 #define DRV_NAME "mpc5xxx_can" 26 27 struct mpc5xxx_can_data { 28 unsigned int type; 29 u32 (*get_clock)(struct platform_device *ofdev, const char *clock_name, 30 int *mscan_clksrc); 31 void (*put_clock)(struct platform_device *ofdev); 32 }; 33 34 #ifdef CONFIG_PPC_MPC52xx 35 static const struct of_device_id mpc52xx_cdm_ids[] = { 36 { .compatible = "fsl,mpc5200-cdm", }, 37 {} 38 }; 39 40 static u32 mpc52xx_can_get_clock(struct platform_device *ofdev, 41 const char *clock_name, int *mscan_clksrc) 42 { 43 unsigned int pvr; 44 struct mpc52xx_cdm __iomem *cdm; 45 struct device_node *np_cdm; 46 unsigned int freq; 47 u32 val; 48 49 pvr = mfspr(SPRN_PVR); 50 51 /* 52 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock 53 * (IP_CLK) can be selected as MSCAN clock source. According to 54 * the MPC5200 user's manual, the oscillator clock is the better 55 * choice as it has less jitter. For this reason, it is selected 56 * by default. Unfortunately, it can not be selected for the old 57 * MPC5200 Rev. A chips due to a hardware bug (check errata). 58 */ 59 if (clock_name && strcmp(clock_name, "ip") == 0) 60 *mscan_clksrc = MSCAN_CLKSRC_BUS; 61 else 62 *mscan_clksrc = MSCAN_CLKSRC_XTAL; 63 64 freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node); 65 if (!freq) 66 return 0; 67 68 if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011) 69 return freq; 70 71 /* Determine SYS_XTAL_IN frequency from the clock domain settings */ 72 np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids); 73 if (!np_cdm) { 74 dev_err(&ofdev->dev, "can't get clock node!\n"); 75 return 0; 76 } 77 cdm = of_iomap(np_cdm, 0); 78 if (!cdm) { 79 of_node_put(np_cdm); 80 dev_err(&ofdev->dev, "can't map clock node!\n"); 81 return 0; 82 } 83 84 if (in_8(&cdm->ipb_clk_sel) & 0x1) 85 freq *= 2; 86 val = in_be32(&cdm->rstcfg); 87 88 freq *= (val & (1 << 5)) ? 8 : 4; 89 freq /= (val & (1 << 6)) ? 12 : 16; 90 91 of_node_put(np_cdm); 92 iounmap(cdm); 93 94 return freq; 95 } 96 #else /* !CONFIG_PPC_MPC52xx */ 97 static u32 mpc52xx_can_get_clock(struct platform_device *ofdev, 98 const char *clock_name, int *mscan_clksrc) 99 { 100 return 0; 101 } 102 #endif /* CONFIG_PPC_MPC52xx */ 103 104 #ifdef CONFIG_PPC_MPC512x 105 static u32 mpc512x_can_get_clock(struct platform_device *ofdev, 106 const char *clock_source, int *mscan_clksrc) 107 { 108 struct device_node *np; 109 u32 clockdiv; 110 enum { 111 CLK_FROM_AUTO, 112 CLK_FROM_IPS, 113 CLK_FROM_SYS, 114 CLK_FROM_REF, 115 } clk_from; 116 struct clk *clk_in, *clk_can; 117 unsigned long freq_calc; 118 struct mscan_priv *priv; 119 struct clk *clk_ipg; 120 121 /* the caller passed in the clock source spec that was read from 122 * the device tree, get the optional clock divider as well 123 */ 124 np = ofdev->dev.of_node; 125 clockdiv = 1; 126 of_property_read_u32(np, "fsl,mscan-clock-divider", &clockdiv); 127 dev_dbg(&ofdev->dev, "device tree specs: clk src[%s] div[%d]\n", 128 clock_source ? clock_source : "<NULL>", clockdiv); 129 130 /* when clock-source is 'ip', the CANCTL1[CLKSRC] bit needs to 131 * get set, and the 'ips' clock is the input to the MSCAN 132 * component 133 * 134 * for clock-source values of 'ref' or 'sys' the CANCTL1[CLKSRC] 135 * bit needs to get cleared, an optional clock-divider may have 136 * been specified (the default value is 1), the appropriate 137 * MSCAN related MCLK is the input to the MSCAN component 138 * 139 * in the absence of a clock-source spec, first an optimal clock 140 * gets determined based on the 'sys' clock, if that fails the 141 * 'ref' clock is used 142 */ 143 clk_from = CLK_FROM_AUTO; 144 if (clock_source) { 145 /* interpret the device tree's spec for the clock source */ 146 if (!strcmp(clock_source, "ip")) 147 clk_from = CLK_FROM_IPS; 148 else if (!strcmp(clock_source, "sys")) 149 clk_from = CLK_FROM_SYS; 150 else if (!strcmp(clock_source, "ref")) 151 clk_from = CLK_FROM_REF; 152 else 153 goto err_invalid; 154 dev_dbg(&ofdev->dev, "got a clk source spec[%d]\n", clk_from); 155 } 156 if (clk_from == CLK_FROM_AUTO) { 157 /* no spec so far, try the 'sys' clock; round to the 158 * next MHz and see if we can get a multiple of 16MHz 159 */ 160 dev_dbg(&ofdev->dev, "no clk source spec, trying SYS\n"); 161 clk_in = devm_clk_get(&ofdev->dev, "sys"); 162 if (IS_ERR(clk_in)) 163 goto err_notavail; 164 freq_calc = clk_get_rate(clk_in); 165 freq_calc += 499999; 166 freq_calc /= 1000000; 167 freq_calc *= 1000000; 168 if ((freq_calc % 16000000) == 0) { 169 clk_from = CLK_FROM_SYS; 170 clockdiv = freq_calc / 16000000; 171 dev_dbg(&ofdev->dev, 172 "clk fit, sys[%lu] div[%d] freq[%lu]\n", 173 freq_calc, clockdiv, freq_calc / clockdiv); 174 } 175 } 176 if (clk_from == CLK_FROM_AUTO) { 177 /* no spec so far, use the 'ref' clock */ 178 dev_dbg(&ofdev->dev, "no clk source spec, trying REF\n"); 179 clk_in = devm_clk_get(&ofdev->dev, "ref"); 180 if (IS_ERR(clk_in)) 181 goto err_notavail; 182 clk_from = CLK_FROM_REF; 183 freq_calc = clk_get_rate(clk_in); 184 dev_dbg(&ofdev->dev, 185 "clk fit, ref[%lu] (no div) freq[%lu]\n", 186 freq_calc, freq_calc); 187 } 188 189 /* select IPS or MCLK as the MSCAN input (returned to the caller), 190 * setup the MCLK mux source and rate if applicable, apply the 191 * optionally specified or derived above divider, and determine 192 * the actual resulting clock rate to return to the caller 193 */ 194 switch (clk_from) { 195 case CLK_FROM_IPS: 196 clk_can = devm_clk_get(&ofdev->dev, "ips"); 197 if (IS_ERR(clk_can)) 198 goto err_notavail; 199 priv = netdev_priv(dev_get_drvdata(&ofdev->dev)); 200 priv->clk_can = clk_can; 201 freq_calc = clk_get_rate(clk_can); 202 *mscan_clksrc = MSCAN_CLKSRC_IPS; 203 dev_dbg(&ofdev->dev, "clk from IPS, clksrc[%d] freq[%lu]\n", 204 *mscan_clksrc, freq_calc); 205 break; 206 case CLK_FROM_SYS: 207 case CLK_FROM_REF: 208 clk_can = devm_clk_get(&ofdev->dev, "mclk"); 209 if (IS_ERR(clk_can)) 210 goto err_notavail; 211 priv = netdev_priv(dev_get_drvdata(&ofdev->dev)); 212 priv->clk_can = clk_can; 213 if (clk_from == CLK_FROM_SYS) 214 clk_in = devm_clk_get(&ofdev->dev, "sys"); 215 if (clk_from == CLK_FROM_REF) 216 clk_in = devm_clk_get(&ofdev->dev, "ref"); 217 if (IS_ERR(clk_in)) 218 goto err_notavail; 219 clk_set_parent(clk_can, clk_in); 220 freq_calc = clk_get_rate(clk_in); 221 freq_calc /= clockdiv; 222 clk_set_rate(clk_can, freq_calc); 223 freq_calc = clk_get_rate(clk_can); 224 *mscan_clksrc = MSCAN_CLKSRC_BUS; 225 dev_dbg(&ofdev->dev, "clk from MCLK, clksrc[%d] freq[%lu]\n", 226 *mscan_clksrc, freq_calc); 227 break; 228 default: 229 goto err_invalid; 230 } 231 232 /* the above clk_can item is used for the bitrate, access to 233 * the peripheral's register set needs the clk_ipg item 234 */ 235 clk_ipg = devm_clk_get(&ofdev->dev, "ipg"); 236 if (IS_ERR(clk_ipg)) 237 goto err_notavail_ipg; 238 if (clk_prepare_enable(clk_ipg)) 239 goto err_notavail_ipg; 240 priv = netdev_priv(dev_get_drvdata(&ofdev->dev)); 241 priv->clk_ipg = clk_ipg; 242 243 /* return the determined clock source rate */ 244 return freq_calc; 245 246 err_invalid: 247 dev_err(&ofdev->dev, "invalid clock source specification\n"); 248 /* clock source rate could not get determined */ 249 return 0; 250 251 err_notavail: 252 dev_err(&ofdev->dev, "cannot acquire or setup bitrate clock source\n"); 253 /* clock source rate could not get determined */ 254 return 0; 255 256 err_notavail_ipg: 257 dev_err(&ofdev->dev, "cannot acquire or setup register clock\n"); 258 /* clock source rate could not get determined */ 259 return 0; 260 } 261 262 static void mpc512x_can_put_clock(struct platform_device *ofdev) 263 { 264 struct mscan_priv *priv; 265 266 priv = netdev_priv(dev_get_drvdata(&ofdev->dev)); 267 if (priv->clk_ipg) 268 clk_disable_unprepare(priv->clk_ipg); 269 } 270 #else /* !CONFIG_PPC_MPC512x */ 271 static u32 mpc512x_can_get_clock(struct platform_device *ofdev, 272 const char *clock_name, int *mscan_clksrc) 273 { 274 return 0; 275 } 276 #define mpc512x_can_put_clock NULL 277 #endif /* CONFIG_PPC_MPC512x */ 278 279 static const struct of_device_id mpc5xxx_can_table[]; 280 static int mpc5xxx_can_probe(struct platform_device *ofdev) 281 { 282 const struct of_device_id *match; 283 const struct mpc5xxx_can_data *data; 284 struct device_node *np = ofdev->dev.of_node; 285 struct net_device *dev; 286 struct mscan_priv *priv; 287 void __iomem *base; 288 const char *clock_name = NULL; 289 int irq, mscan_clksrc = 0; 290 int err = -ENOMEM; 291 292 match = of_match_device(mpc5xxx_can_table, &ofdev->dev); 293 if (!match) 294 return -EINVAL; 295 data = match->data; 296 297 base = of_iomap(np, 0); 298 if (!base) { 299 dev_err(&ofdev->dev, "couldn't ioremap\n"); 300 return err; 301 } 302 303 irq = irq_of_parse_and_map(np, 0); 304 if (!irq) { 305 dev_err(&ofdev->dev, "no irq found\n"); 306 err = -ENODEV; 307 goto exit_unmap_mem; 308 } 309 310 dev = alloc_mscandev(); 311 if (!dev) 312 goto exit_dispose_irq; 313 platform_set_drvdata(ofdev, dev); 314 SET_NETDEV_DEV(dev, &ofdev->dev); 315 316 priv = netdev_priv(dev); 317 priv->reg_base = base; 318 dev->irq = irq; 319 320 clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL); 321 322 BUG_ON(!data); 323 priv->type = data->type; 324 priv->can.clock.freq = data->get_clock(ofdev, clock_name, 325 &mscan_clksrc); 326 if (!priv->can.clock.freq) { 327 dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n"); 328 goto exit_free_mscan; 329 } 330 331 err = register_mscandev(dev, mscan_clksrc); 332 if (err) { 333 dev_err(&ofdev->dev, "registering %s failed (err=%d)\n", 334 DRV_NAME, err); 335 goto exit_free_mscan; 336 } 337 338 dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n", 339 priv->reg_base, dev->irq, priv->can.clock.freq); 340 341 return 0; 342 343 exit_free_mscan: 344 free_candev(dev); 345 exit_dispose_irq: 346 irq_dispose_mapping(irq); 347 exit_unmap_mem: 348 iounmap(base); 349 350 return err; 351 } 352 353 static int mpc5xxx_can_remove(struct platform_device *ofdev) 354 { 355 const struct of_device_id *match; 356 const struct mpc5xxx_can_data *data; 357 struct net_device *dev = platform_get_drvdata(ofdev); 358 struct mscan_priv *priv = netdev_priv(dev); 359 360 match = of_match_device(mpc5xxx_can_table, &ofdev->dev); 361 data = match ? match->data : NULL; 362 363 unregister_mscandev(dev); 364 if (data && data->put_clock) 365 data->put_clock(ofdev); 366 iounmap(priv->reg_base); 367 irq_dispose_mapping(dev->irq); 368 free_candev(dev); 369 370 return 0; 371 } 372 373 #ifdef CONFIG_PM 374 static struct mscan_regs saved_regs; 375 static int mpc5xxx_can_suspend(struct platform_device *ofdev, pm_message_t state) 376 { 377 struct net_device *dev = platform_get_drvdata(ofdev); 378 struct mscan_priv *priv = netdev_priv(dev); 379 struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; 380 381 _memcpy_fromio(&saved_regs, regs, sizeof(*regs)); 382 383 return 0; 384 } 385 386 static int mpc5xxx_can_resume(struct platform_device *ofdev) 387 { 388 struct net_device *dev = platform_get_drvdata(ofdev); 389 struct mscan_priv *priv = netdev_priv(dev); 390 struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base; 391 392 regs->canctl0 |= MSCAN_INITRQ; 393 while (!(regs->canctl1 & MSCAN_INITAK)) 394 udelay(10); 395 396 regs->canctl1 = saved_regs.canctl1; 397 regs->canbtr0 = saved_regs.canbtr0; 398 regs->canbtr1 = saved_regs.canbtr1; 399 regs->canidac = saved_regs.canidac; 400 401 /* restore masks, buffers etc. */ 402 _memcpy_toio(®s->canidar1_0, (void *)&saved_regs.canidar1_0, 403 sizeof(*regs) - offsetof(struct mscan_regs, canidar1_0)); 404 405 regs->canctl0 &= ~MSCAN_INITRQ; 406 regs->cantbsel = saved_regs.cantbsel; 407 regs->canrier = saved_regs.canrier; 408 regs->cantier = saved_regs.cantier; 409 regs->canctl0 = saved_regs.canctl0; 410 411 return 0; 412 } 413 #endif 414 415 static const struct mpc5xxx_can_data mpc5200_can_data = { 416 .type = MSCAN_TYPE_MPC5200, 417 .get_clock = mpc52xx_can_get_clock, 418 /* .put_clock not applicable */ 419 }; 420 421 static const struct mpc5xxx_can_data mpc5121_can_data = { 422 .type = MSCAN_TYPE_MPC5121, 423 .get_clock = mpc512x_can_get_clock, 424 .put_clock = mpc512x_can_put_clock, 425 }; 426 427 static const struct of_device_id mpc5xxx_can_table[] = { 428 { .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, }, 429 /* Note that only MPC5121 Rev. 2 (and later) is supported */ 430 { .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, }, 431 {}, 432 }; 433 MODULE_DEVICE_TABLE(of, mpc5xxx_can_table); 434 435 static struct platform_driver mpc5xxx_can_driver = { 436 .driver = { 437 .name = "mpc5xxx_can", 438 .of_match_table = mpc5xxx_can_table, 439 }, 440 .probe = mpc5xxx_can_probe, 441 .remove = mpc5xxx_can_remove, 442 #ifdef CONFIG_PM 443 .suspend = mpc5xxx_can_suspend, 444 .resume = mpc5xxx_can_resume, 445 #endif 446 }; 447 448 module_platform_driver(mpc5xxx_can_driver); 449 450 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>"); 451 MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver"); 452 MODULE_LICENSE("GPL v2"); 453