1 /* 2 * Linux ARCnet driver - COM20020 chipset support 3 * 4 * Written 1997 by David Woodhouse. 5 * Written 1994-1999 by Avery Pennarun. 6 * Written 1999 by Martin Mares <mj@ucw.cz>. 7 * Derived from skeleton.c by Donald Becker. 8 * 9 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) 10 * for sponsoring the further development of this driver. 11 * 12 * ********************** 13 * 14 * The original copyright of skeleton.c was as follows: 15 * 16 * skeleton.c Written 1993 by Donald Becker. 17 * Copyright 1993 United States Government as represented by the 18 * Director, National Security Agency. This software may only be used 19 * and distributed according to the terms of the GNU General Public License as 20 * modified by SRC, incorporated herein by reference. 21 * 22 * ********************** 23 * 24 * For more details, see drivers/net/arcnet.c 25 * 26 * ********************** 27 */ 28 29 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt 30 31 #include <linux/module.h> 32 #include <linux/kernel.h> 33 #include <linux/types.h> 34 #include <linux/ioport.h> 35 #include <linux/errno.h> 36 #include <linux/delay.h> 37 #include <linux/netdevice.h> 38 #include <linux/init.h> 39 #include <linux/interrupt.h> 40 #include <linux/io.h> 41 42 #include "arcdevice.h" 43 #include "com20020.h" 44 45 static const char * const clockrates[] = { 46 "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", 47 "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s", 48 "Reserved", "Reserved", "Reserved" 49 }; 50 51 static void com20020_command(struct net_device *dev, int command); 52 static int com20020_status(struct net_device *dev); 53 static void com20020_setmask(struct net_device *dev, int mask); 54 static int com20020_reset(struct net_device *dev, int really_reset); 55 static void com20020_copy_to_card(struct net_device *dev, int bufnum, 56 int offset, void *buf, int count); 57 static void com20020_copy_from_card(struct net_device *dev, int bufnum, 58 int offset, void *buf, int count); 59 static void com20020_set_mc_list(struct net_device *dev); 60 static void com20020_close(struct net_device *); 61 62 static void com20020_copy_from_card(struct net_device *dev, int bufnum, 63 int offset, void *buf, int count) 64 { 65 int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; 66 67 /* set up the address register */ 68 arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, 69 ioaddr, COM20020_REG_W_ADDR_HI); 70 arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); 71 72 /* copy the data */ 73 TIME(dev, "insb", count, 74 arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); 75 } 76 77 static void com20020_copy_to_card(struct net_device *dev, int bufnum, 78 int offset, void *buf, int count) 79 { 80 int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; 81 82 /* set up the address register */ 83 arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); 84 arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); 85 86 /* copy the data */ 87 TIME(dev, "outsb", count, 88 arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); 89 } 90 91 /* Reset the card and check some basic stuff during the detection stage. */ 92 int com20020_check(struct net_device *dev) 93 { 94 int ioaddr = dev->base_addr, status; 95 struct arcnet_local *lp = netdev_priv(dev); 96 97 arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); 98 udelay(5); 99 arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); 100 mdelay(RESETtime); 101 102 lp->setup = lp->clockm ? 0 : (lp->clockp << 1); 103 lp->setup2 = (lp->clockm << 4) | 8; 104 105 /* CHECK: should we do this for SOHARD cards ? */ 106 /* Enable P1Mode for backplane mode */ 107 lp->setup = lp->setup | P1MODE; 108 109 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); 110 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); 111 112 if (lp->clockm != 0) { 113 com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); 114 arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); 115 116 /* must now write the magic "restart operation" command */ 117 mdelay(1); 118 arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); 119 } 120 121 lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; 122 /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ 123 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 124 arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); 125 126 status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); 127 128 if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { 129 arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); 130 return -ENODEV; 131 } 132 arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); 133 134 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, 135 ioaddr, COM20020_REG_W_COMMAND); 136 status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); 137 arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", 138 status); 139 140 /* Read first location of memory */ 141 arcnet_outb(0 | RDDATAflag | AUTOINCflag, 142 ioaddr, COM20020_REG_W_ADDR_HI); 143 arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); 144 145 status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); 146 if (status != TESTvalue) { 147 arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", 148 status); 149 return -ENODEV; 150 } 151 return 0; 152 } 153 154 static int com20020_set_hwaddr(struct net_device *dev, void *addr) 155 { 156 int ioaddr = dev->base_addr; 157 struct arcnet_local *lp = netdev_priv(dev); 158 struct sockaddr *hwaddr = addr; 159 160 dev_addr_set(dev, hwaddr->sa_data); 161 com20020_set_subaddress(lp, ioaddr, SUB_NODE); 162 arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); 163 164 return 0; 165 } 166 167 static int com20020_netdev_open(struct net_device *dev) 168 { 169 int ioaddr = dev->base_addr; 170 struct arcnet_local *lp = netdev_priv(dev); 171 172 lp->config |= TXENcfg; 173 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 174 175 return arcnet_open(dev); 176 } 177 178 static int com20020_netdev_close(struct net_device *dev) 179 { 180 int ioaddr = dev->base_addr; 181 struct arcnet_local *lp = netdev_priv(dev); 182 183 arcnet_close(dev); 184 185 /* disable transmitter */ 186 lp->config &= ~TXENcfg; 187 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 188 return 0; 189 } 190 191 const struct net_device_ops com20020_netdev_ops = { 192 .ndo_open = com20020_netdev_open, 193 .ndo_stop = com20020_netdev_close, 194 .ndo_start_xmit = arcnet_send_packet, 195 .ndo_tx_timeout = arcnet_timeout, 196 .ndo_set_mac_address = com20020_set_hwaddr, 197 .ndo_set_rx_mode = com20020_set_mc_list, 198 }; 199 200 /* Set up the struct net_device associated with this card. Called after 201 * probing succeeds. 202 */ 203 int com20020_found(struct net_device *dev, int shared) 204 { 205 struct arcnet_local *lp; 206 int ioaddr = dev->base_addr; 207 208 /* Initialize the rest of the device structure. */ 209 210 lp = netdev_priv(dev); 211 212 lp->hw.owner = THIS_MODULE; 213 lp->hw.command = com20020_command; 214 lp->hw.status = com20020_status; 215 lp->hw.intmask = com20020_setmask; 216 lp->hw.reset = com20020_reset; 217 lp->hw.copy_to_card = com20020_copy_to_card; 218 lp->hw.copy_from_card = com20020_copy_from_card; 219 lp->hw.close = com20020_close; 220 221 /* FIXME: do this some other way! */ 222 if (!dev->dev_addr[0]) 223 arcnet_set_addr(dev, arcnet_inb(ioaddr, 8)); 224 225 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); 226 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); 227 228 if (lp->card_flags & ARC_CAN_10MBIT) { 229 com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); 230 arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); 231 232 /* must now write the magic "restart operation" command */ 233 mdelay(1); 234 arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); 235 } 236 237 lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; 238 /* Default 0x38 + register: Node ID */ 239 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 240 arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); 241 242 /* reserve the irq */ 243 if (request_irq(dev->irq, arcnet_interrupt, shared, 244 "arcnet (COM20020)", dev)) { 245 arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); 246 return -ENODEV; 247 } 248 249 arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", 250 lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); 251 252 if (lp->backplane) 253 arc_printk(D_NORMAL, dev, "Using backplane mode.\n"); 254 255 if (lp->timeout != 3) 256 arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n", 257 lp->timeout); 258 259 arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n", 260 lp->setup >> 1, 261 clockrates[3 - 262 ((lp->setup2 & 0xF0) >> 4) + 263 ((lp->setup & 0x0F) >> 1)]); 264 /* The clockrates array index looks very fragile. 265 * It seems like it could have negative indexing. 266 */ 267 268 if (register_netdev(dev)) { 269 free_irq(dev->irq, dev); 270 return -EIO; 271 } 272 return 0; 273 } 274 275 /* Do a hardware reset on the card, and set up necessary registers. 276 * 277 * This should be called as little as possible, because it disrupts the 278 * token on the network (causes a RECON) and requires a significant delay. 279 * 280 * However, it does make sure the card is in a defined state. 281 */ 282 static int com20020_reset(struct net_device *dev, int really_reset) 283 { 284 struct arcnet_local *lp = netdev_priv(dev); 285 u_int ioaddr = dev->base_addr; 286 u_char inbyte; 287 288 arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", 289 __FILE__, __LINE__, __func__, dev, lp, dev->name); 290 arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", 291 dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); 292 293 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); 294 lp->config |= (lp->timeout << 3) | (lp->backplane << 2); 295 /* power-up defaults */ 296 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 297 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); 298 299 if (really_reset) { 300 /* reset the card */ 301 arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); 302 udelay(5); 303 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 304 mdelay(RESETtime * 2); 305 /* COM20020 seems to be slower sometimes */ 306 } 307 /* clear flags & end reset */ 308 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); 309 arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, 310 ioaddr, COM20020_REG_W_COMMAND); 311 312 /* verify that the ARCnet signature byte is present */ 313 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); 314 315 com20020_copy_from_card(dev, 0, 0, &inbyte, 1); 316 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); 317 if (inbyte != TESTvalue) { 318 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", 319 __FILE__, __LINE__, __func__); 320 arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); 321 return 1; 322 } 323 /* enable extended (512-byte) packets */ 324 arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); 325 326 arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); 327 328 /* done! return success. */ 329 return 0; 330 } 331 332 static void com20020_setmask(struct net_device *dev, int mask) 333 { 334 u_int ioaddr = dev->base_addr; 335 336 arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); 337 arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); 338 } 339 340 static void com20020_command(struct net_device *dev, int cmd) 341 { 342 u_int ioaddr = dev->base_addr; 343 344 arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); 345 } 346 347 static int com20020_status(struct net_device *dev) 348 { 349 u_int ioaddr = dev->base_addr; 350 351 return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + 352 (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); 353 } 354 355 static void com20020_close(struct net_device *dev) 356 { 357 struct arcnet_local *lp = netdev_priv(dev); 358 int ioaddr = dev->base_addr; 359 360 /* disable transmitter */ 361 lp->config &= ~TXENcfg; 362 arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); 363 } 364 365 /* Set or clear the multicast filter for this adaptor. 366 * num_addrs == -1 Promiscuous mode, receive all packets 367 * num_addrs == 0 Normal mode, clear multicast list 368 * num_addrs > 0 Multicast mode, receive normal and MC packets, and do 369 * best-effort filtering. 370 * FIXME - do multicast stuff, not just promiscuous. 371 */ 372 static void com20020_set_mc_list(struct net_device *dev) 373 { 374 struct arcnet_local *lp = netdev_priv(dev); 375 int ioaddr = dev->base_addr; 376 377 if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { 378 /* Enable promiscuous mode */ 379 if (!(lp->setup & PROMISCset)) 380 arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); 381 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); 382 lp->setup |= PROMISCset; 383 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); 384 } else { 385 /* Disable promiscuous mode, use normal mode */ 386 if ((lp->setup & PROMISCset)) 387 arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); 388 com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); 389 lp->setup &= ~PROMISCset; 390 arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); 391 } 392 } 393 394 #if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \ 395 defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \ 396 defined(CONFIG_ARCNET_COM20020_CS_MODULE) 397 EXPORT_SYMBOL(com20020_check); 398 EXPORT_SYMBOL(com20020_found); 399 EXPORT_SYMBOL(com20020_netdev_ops); 400 #endif 401 402 MODULE_DESCRIPTION("ARCnet COM20020 chipset core driver"); 403 MODULE_LICENSE("GPL"); 404 405 #ifdef MODULE 406 407 static int __init com20020_module_init(void) 408 { 409 if (BUGLVL(D_NORMAL)) 410 pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)"); 411 return 0; 412 } 413 414 static void __exit com20020_module_exit(void) 415 { 416 } 417 module_init(com20020_module_init); 418 module_exit(com20020_module_exit); 419 #endif /* MODULE */ 420