xref: /linux/drivers/net/Space.c (revision 987b741c52c7c6c68d46fbaeb95b8d1087f10b7f)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * INET		An implementation of the TCP/IP protocol suite for the LINUX
4  *		operating system.  INET is implemented using the  BSD Socket
5  *		interface as the means of communication with the user level.
6  *
7  *		Holds initial configuration information for devices.
8  *
9  * Version:	@(#)Space.c	1.0.7	08/12/93
10  *
11  * Authors:	Ross Biro
12  *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13  *		Donald J. Becker, <becker@scyld.com>
14  *
15  * Changelog:
16  *		Stephen Hemminger (09/2003)
17  *		- get rid of pre-linked dev list, dynamic device allocation
18  *		Paul Gortmaker (03/2002)
19  *		- struct init cleanup, enable multiple ISA autoprobes.
20  *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
21  *		- fix sbni: s/device/net_device/
22  *		Paul Gortmaker (06/98):
23  *		 - sort probes in a sane way, make sure all (safe) probes
24  *		   get run once & failed autoprobes don't autoprobe again.
25  */
26 #include <linux/netdevice.h>
27 #include <linux/etherdevice.h>
28 #include <linux/errno.h>
29 #include <linux/init.h>
30 #include <linux/netlink.h>
31 #include <net/Space.h>
32 
33 /* A unified ethernet device probe.  This is the easiest way to have every
34  * ethernet adaptor have the name "eth[0123...]".
35  */
36 
37 struct devprobe2 {
38 	struct net_device *(*probe)(int unit);
39 	int status;	/* non-zero if autoprobe has failed */
40 };
41 
42 static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
43 {
44 	struct net_device *dev;
45 
46 	for (; p->probe; p++) {
47 		if (autoprobe && p->status)
48 			continue;
49 		dev = p->probe(unit);
50 		if (!IS_ERR(dev))
51 			return 0;
52 		if (autoprobe)
53 			p->status = PTR_ERR(dev);
54 	}
55 	return -ENODEV;
56 }
57 
58 /* ISA probes that touch addresses < 0x400 (including those that also
59  * look for EISA/PCI cards in addition to ISA cards).
60  */
61 static struct devprobe2 isa_probes[] __initdata = {
62 #ifdef CONFIG_3C515
63 	{tc515_probe, 0},
64 #endif
65 #ifdef CONFIG_ULTRA
66 	{ultra_probe, 0},
67 #endif
68 #ifdef CONFIG_WD80x3
69 	{wd_probe, 0},
70 #endif
71 #if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */
72 	{ne_probe, 0},
73 #endif
74 #ifdef CONFIG_LANCE		/* ISA/VLB (use pcnet32 for PCI cards) */
75 	{lance_probe, 0},
76 #endif
77 #ifdef CONFIG_SMC9194
78 	{smc_init, 0},
79 #endif
80 #ifdef CONFIG_CS89x0
81 #ifndef CONFIG_CS89x0_PLATFORM
82 	{cs89x0_probe, 0},
83 #endif
84 #endif
85 #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET)	/* Intel */
86 	{i82596_probe, 0},					/* I82596 */
87 #endif
88 #ifdef CONFIG_NI65
89 	{ni65_probe, 0},
90 #endif
91 	{NULL, 0},
92 };
93 
94 static struct devprobe2 m68k_probes[] __initdata = {
95 #ifdef CONFIG_ATARILANCE	/* Lance-based Atari ethernet boards */
96 	{atarilance_probe, 0},
97 #endif
98 #ifdef CONFIG_SUN3LANCE         /* sun3 onboard Lance chip */
99 	{sun3lance_probe, 0},
100 #endif
101 #ifdef CONFIG_SUN3_82586        /* sun3 onboard Intel 82586 chip */
102 	{sun3_82586_probe, 0},
103 #endif
104 #ifdef CONFIG_APNE		/* A1200 PCMCIA NE2000 */
105 	{apne_probe, 0},
106 #endif
107 #ifdef CONFIG_MVME147_NET	/* MVME147 internal Ethernet */
108 	{mvme147lance_probe, 0},
109 #endif
110 	{NULL, 0},
111 };
112 
113 /* Unified ethernet device probe, segmented per architecture and
114  * per bus interface. This drives the legacy devices only for now.
115  */
116 
117 static void __init ethif_probe2(int unit)
118 {
119 	unsigned long base_addr = netdev_boot_base("eth", unit);
120 
121 	if (base_addr == 1)
122 		return;
123 
124 	(void)(probe_list2(unit, m68k_probes, base_addr == 0) &&
125 		probe_list2(unit, isa_probes, base_addr == 0));
126 }
127 
128 /*  Statically configured drivers -- order matters here. */
129 static int __init net_olddevs_init(void)
130 {
131 	int num;
132 
133 #ifdef CONFIG_SBNI
134 	for (num = 0; num < 8; ++num)
135 		sbni_probe(num);
136 #endif
137 	for (num = 0; num < 8; ++num)
138 		ethif_probe2(num);
139 
140 #ifdef CONFIG_COPS
141 	cops_probe(0);
142 	cops_probe(1);
143 	cops_probe(2);
144 #endif
145 #ifdef CONFIG_LTPC
146 	ltpc_probe();
147 #endif
148 
149 	return 0;
150 }
151 
152 device_initcall(net_olddevs_init);
153