1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (C) 2005, Intec Automation Inc. 4 * Copyright (C) 2014, Freescale Semiconductor, Inc. 5 */ 6 7 #ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H 8 #define __LINUX_MTD_SPI_NOR_INTERNAL_H 9 10 #include "sfdp.h" 11 12 #define SPI_NOR_MAX_ID_LEN 6 13 /* 14 * 256 bytes is a sane default for most older flashes. Newer flashes will 15 * have the page size defined within their SFDP tables. 16 */ 17 #define SPI_NOR_DEFAULT_PAGE_SIZE 256 18 #define SPI_NOR_DEFAULT_N_BANKS 1 19 #define SPI_NOR_DEFAULT_SECTOR_SIZE SZ_64K 20 21 /* Standard SPI NOR flash operations. */ 22 #define SPI_NOR_READID_OP(naddr, ndummy, buf, len) \ 23 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 0), \ 24 SPI_MEM_OP_ADDR(naddr, 0, 0), \ 25 SPI_MEM_OP_DUMMY(ndummy, 0), \ 26 SPI_MEM_OP_DATA_IN(len, buf, 0)) 27 28 #define SPI_NOR_WREN_OP \ 29 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 0), \ 30 SPI_MEM_OP_NO_ADDR, \ 31 SPI_MEM_OP_NO_DUMMY, \ 32 SPI_MEM_OP_NO_DATA) 33 34 #define SPI_NOR_WRDI_OP \ 35 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 0), \ 36 SPI_MEM_OP_NO_ADDR, \ 37 SPI_MEM_OP_NO_DUMMY, \ 38 SPI_MEM_OP_NO_DATA) 39 40 #define SPI_NOR_RDSR_OP(buf) \ 41 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 0), \ 42 SPI_MEM_OP_NO_ADDR, \ 43 SPI_MEM_OP_NO_DUMMY, \ 44 SPI_MEM_OP_DATA_IN(1, buf, 0)) 45 46 #define SPI_NOR_WRSR_OP(buf, len) \ 47 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 0), \ 48 SPI_MEM_OP_NO_ADDR, \ 49 SPI_MEM_OP_NO_DUMMY, \ 50 SPI_MEM_OP_DATA_OUT(len, buf, 0)) 51 52 #define SPI_NOR_RDSR2_OP(buf) \ 53 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 0), \ 54 SPI_MEM_OP_NO_ADDR, \ 55 SPI_MEM_OP_NO_DUMMY, \ 56 SPI_MEM_OP_DATA_OUT(1, buf, 0)) 57 58 #define SPI_NOR_WRSR2_OP(buf) \ 59 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 0), \ 60 SPI_MEM_OP_NO_ADDR, \ 61 SPI_MEM_OP_NO_DUMMY, \ 62 SPI_MEM_OP_DATA_OUT(1, buf, 0)) 63 64 #define SPI_NOR_RDCR_OP(buf) \ 65 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 0), \ 66 SPI_MEM_OP_NO_ADDR, \ 67 SPI_MEM_OP_NO_DUMMY, \ 68 SPI_MEM_OP_DATA_IN(1, buf, 0)) 69 70 #define SPI_NOR_EN4B_EX4B_OP(enable) \ 71 SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, 0), \ 72 SPI_MEM_OP_NO_ADDR, \ 73 SPI_MEM_OP_NO_DUMMY, \ 74 SPI_MEM_OP_NO_DATA) 75 76 #define SPI_NOR_BRWR_OP(buf) \ 77 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 0), \ 78 SPI_MEM_OP_NO_ADDR, \ 79 SPI_MEM_OP_NO_DUMMY, \ 80 SPI_MEM_OP_DATA_OUT(1, buf, 0)) 81 82 #define SPI_NOR_GBULK_OP \ 83 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 0), \ 84 SPI_MEM_OP_NO_ADDR, \ 85 SPI_MEM_OP_NO_DUMMY, \ 86 SPI_MEM_OP_NO_DATA) 87 88 #define SPI_NOR_DIE_ERASE_OP(opcode, addr_nbytes, addr, dice) \ 89 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 90 SPI_MEM_OP_ADDR(dice ? addr_nbytes : 0, addr, 0), \ 91 SPI_MEM_OP_NO_DUMMY, \ 92 SPI_MEM_OP_NO_DATA) 93 94 #define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr) \ 95 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 96 SPI_MEM_OP_ADDR(addr_nbytes, addr, 0), \ 97 SPI_MEM_OP_NO_DUMMY, \ 98 SPI_MEM_OP_NO_DATA) 99 100 #define SPI_NOR_READ_OP(opcode) \ 101 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 102 SPI_MEM_OP_ADDR(3, 0, 0), \ 103 SPI_MEM_OP_DUMMY(1, 0), \ 104 SPI_MEM_OP_DATA_IN(2, NULL, 0)) 105 106 #define SPI_NOR_PP_OP(opcode) \ 107 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 108 SPI_MEM_OP_ADDR(3, 0, 0), \ 109 SPI_MEM_OP_NO_DUMMY, \ 110 SPI_MEM_OP_DATA_OUT(2, NULL, 0)) 111 112 #define SPINOR_SRSTEN_OP \ 113 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0), \ 114 SPI_MEM_OP_NO_DUMMY, \ 115 SPI_MEM_OP_NO_ADDR, \ 116 SPI_MEM_OP_NO_DATA) 117 118 #define SPINOR_SRST_OP \ 119 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRST, 0), \ 120 SPI_MEM_OP_NO_DUMMY, \ 121 SPI_MEM_OP_NO_ADDR, \ 122 SPI_MEM_OP_NO_DATA) 123 124 /* Keep these in sync with the list in debugfs.c */ 125 enum spi_nor_option_flags { 126 SNOR_F_HAS_SR_TB = BIT(0), 127 SNOR_F_NO_OP_CHIP_ERASE = BIT(1), 128 SNOR_F_BROKEN_RESET = BIT(2), 129 SNOR_F_4B_OPCODES = BIT(3), 130 SNOR_F_HAS_4BAIT = BIT(4), 131 SNOR_F_HAS_LOCK = BIT(5), 132 SNOR_F_HAS_16BIT_SR = BIT(6), 133 SNOR_F_NO_READ_CR = BIT(7), 134 SNOR_F_HAS_SR_TB_BIT6 = BIT(8), 135 SNOR_F_HAS_4BIT_BP = BIT(9), 136 SNOR_F_HAS_SR_BP3_BIT6 = BIT(10), 137 SNOR_F_IO_MODE_EN_VOLATILE = BIT(11), 138 SNOR_F_SOFT_RESET = BIT(12), 139 SNOR_F_SWP_IS_VOLATILE = BIT(13), 140 SNOR_F_RWW = BIT(14), 141 SNOR_F_ECC = BIT(15), 142 SNOR_F_NO_WP = BIT(16), 143 }; 144 145 struct spi_nor_read_command { 146 u8 num_mode_clocks; 147 u8 num_wait_states; 148 u8 opcode; 149 enum spi_nor_protocol proto; 150 }; 151 152 struct spi_nor_pp_command { 153 u8 opcode; 154 enum spi_nor_protocol proto; 155 }; 156 157 enum spi_nor_read_command_index { 158 SNOR_CMD_READ, 159 SNOR_CMD_READ_FAST, 160 SNOR_CMD_READ_1_1_1_DTR, 161 162 /* Dual SPI */ 163 SNOR_CMD_READ_1_1_2, 164 SNOR_CMD_READ_1_2_2, 165 SNOR_CMD_READ_2_2_2, 166 SNOR_CMD_READ_1_2_2_DTR, 167 168 /* Quad SPI */ 169 SNOR_CMD_READ_1_1_4, 170 SNOR_CMD_READ_1_4_4, 171 SNOR_CMD_READ_4_4_4, 172 SNOR_CMD_READ_1_4_4_DTR, 173 174 /* Octal SPI */ 175 SNOR_CMD_READ_1_1_8, 176 SNOR_CMD_READ_1_8_8, 177 SNOR_CMD_READ_8_8_8, 178 SNOR_CMD_READ_1_8_8_DTR, 179 SNOR_CMD_READ_8_8_8_DTR, 180 181 SNOR_CMD_READ_MAX 182 }; 183 184 enum spi_nor_pp_command_index { 185 SNOR_CMD_PP, 186 187 /* Quad SPI */ 188 SNOR_CMD_PP_1_1_4, 189 SNOR_CMD_PP_1_4_4, 190 SNOR_CMD_PP_4_4_4, 191 192 /* Octal SPI */ 193 SNOR_CMD_PP_1_1_8, 194 SNOR_CMD_PP_1_8_8, 195 SNOR_CMD_PP_8_8_8, 196 SNOR_CMD_PP_8_8_8_DTR, 197 198 SNOR_CMD_PP_MAX 199 }; 200 201 /** 202 * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type 203 * @size: the size of the sector/block erased by the erase type. 204 * JEDEC JESD216B imposes erase sizes to be a power of 2. 205 * @size_shift: @size is a power of 2, the shift is stored in 206 * @size_shift. 207 * @size_mask: the size mask based on @size_shift. 208 * @opcode: the SPI command op code to erase the sector/block. 209 * @idx: Erase Type index as sorted in the Basic Flash Parameter 210 * Table. It will be used to synchronize the supported 211 * Erase Types with the ones identified in the SFDP 212 * optional tables. 213 */ 214 struct spi_nor_erase_type { 215 u32 size; 216 u32 size_shift; 217 u32 size_mask; 218 u8 opcode; 219 u8 idx; 220 }; 221 222 /** 223 * struct spi_nor_erase_command - Used for non-uniform erases 224 * The structure is used to describe a list of erase commands to be executed 225 * once we validate that the erase can be performed. The elements in the list 226 * are run-length encoded. 227 * @list: for inclusion into the list of erase commands. 228 * @count: how many times the same erase command should be 229 * consecutively used. 230 * @size: the size of the sector/block erased by the command. 231 * @opcode: the SPI command op code to erase the sector/block. 232 */ 233 struct spi_nor_erase_command { 234 struct list_head list; 235 u32 count; 236 u32 size; 237 u8 opcode; 238 }; 239 240 /** 241 * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region 242 * @offset: the offset in the data array of erase region start. 243 * @size: the size of the region in bytes. 244 * @erase_mask: bitmask to indicate all the supported erase commands 245 * inside this region. The erase types are sorted in 246 * ascending order with the smallest Erase Type size being 247 * at BIT(0). 248 * @overlaid: determine if this region is overlaid. 249 */ 250 struct spi_nor_erase_region { 251 u64 offset; 252 u64 size; 253 u8 erase_mask; 254 bool overlaid; 255 }; 256 257 #define SNOR_ERASE_TYPE_MAX 4 258 259 /** 260 * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map 261 * @regions: array of erase regions. The regions are consecutive in 262 * address space. Walking through the regions is done 263 * incrementally. 264 * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform 265 * sector size (legacy implementation). 266 * @erase_type: an array of erase types shared by all the regions. 267 * The erase types are sorted in ascending order, with the 268 * smallest Erase Type size being the first member in the 269 * erase_type array. 270 * @n_regions: number of erase regions. 271 */ 272 struct spi_nor_erase_map { 273 struct spi_nor_erase_region *regions; 274 struct spi_nor_erase_region uniform_region; 275 struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX]; 276 unsigned int n_regions; 277 }; 278 279 /** 280 * struct spi_nor_locking_ops - SPI NOR locking methods 281 * @lock: lock a region of the SPI NOR. 282 * @unlock: unlock a region of the SPI NOR. 283 * @is_locked: check if a region of the SPI NOR is completely locked 284 */ 285 struct spi_nor_locking_ops { 286 int (*lock)(struct spi_nor *nor, loff_t ofs, u64 len); 287 int (*unlock)(struct spi_nor *nor, loff_t ofs, u64 len); 288 int (*is_locked)(struct spi_nor *nor, loff_t ofs, u64 len); 289 }; 290 291 /** 292 * struct spi_nor_otp_organization - Structure to describe the SPI NOR OTP regions 293 * @len: size of one OTP region in bytes. 294 * @base: start address of the OTP area. 295 * @offset: offset between consecutive OTP regions if there are more 296 * than one. 297 * @n_regions: number of individual OTP regions. 298 */ 299 struct spi_nor_otp_organization { 300 size_t len; 301 loff_t base; 302 loff_t offset; 303 unsigned int n_regions; 304 }; 305 306 /** 307 * struct spi_nor_otp_ops - SPI NOR OTP methods 308 * @read: read from the SPI NOR OTP area. 309 * @write: write to the SPI NOR OTP area. 310 * @lock: lock an OTP region. 311 * @erase: erase an OTP region. 312 * @is_locked: check if an OTP region of the SPI NOR is locked. 313 */ 314 struct spi_nor_otp_ops { 315 int (*read)(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf); 316 int (*write)(struct spi_nor *nor, loff_t addr, size_t len, 317 const u8 *buf); 318 int (*lock)(struct spi_nor *nor, unsigned int region); 319 int (*erase)(struct spi_nor *nor, loff_t addr); 320 int (*is_locked)(struct spi_nor *nor, unsigned int region); 321 }; 322 323 /** 324 * struct spi_nor_otp - SPI NOR OTP grouping structure 325 * @org: OTP region organization 326 * @ops: OTP access ops 327 */ 328 struct spi_nor_otp { 329 const struct spi_nor_otp_organization *org; 330 const struct spi_nor_otp_ops *ops; 331 }; 332 333 /** 334 * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings. 335 * Includes legacy flash parameters and settings that can be overwritten 336 * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216 337 * Serial Flash Discoverable Parameters (SFDP) tables. 338 * 339 * @bank_size: the flash memory bank density in bytes. 340 * @size: the total flash memory density in bytes. 341 * @writesize Minimal writable flash unit size. Defaults to 1. Set to 342 * ECC unit size for ECC-ed flashes. 343 * @page_size: the page size of the SPI NOR flash memory. 344 * @addr_nbytes: number of address bytes to send. 345 * @addr_mode_nbytes: number of address bytes of current address mode. Useful 346 * when the flash operates with 4B opcodes but needs the 347 * internal address mode for opcodes that don't have a 4B 348 * opcode correspondent. 349 * @rdsr_dummy: dummy cycles needed for Read Status Register command 350 * in octal DTR mode. 351 * @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register 352 * command in octal DTR mode. 353 * @n_banks: number of banks. 354 * @n_dice: number of dice in the flash memory. 355 * @die_erase_opcode: die erase opcode. Defaults to SPINOR_OP_CHIP_ERASE. 356 * @vreg_offset: volatile register offset for each die. 357 * @hwcaps: describes the read and page program hardware 358 * capabilities. 359 * @reads: read capabilities ordered by priority: the higher index 360 * in the array, the higher priority. 361 * @page_programs: page program capabilities ordered by priority: the 362 * higher index in the array, the higher priority. 363 * @erase_map: the erase map parsed from the SFDP Sector Map Parameter 364 * Table. 365 * @otp: SPI NOR OTP info. 366 * @set_octal_dtr: enables or disables SPI NOR octal DTR mode. 367 * @quad_enable: enables SPI NOR quad mode. 368 * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode. 369 * @ready: (optional) flashes might use a different mechanism 370 * than reading the status register to indicate they 371 * are ready for a new command 372 * @locking_ops: SPI NOR locking methods. 373 * @priv: flash's private data. 374 */ 375 struct spi_nor_flash_parameter { 376 u64 bank_size; 377 u64 size; 378 u32 writesize; 379 u32 page_size; 380 u8 addr_nbytes; 381 u8 addr_mode_nbytes; 382 u8 rdsr_dummy; 383 u8 rdsr_addr_nbytes; 384 u8 n_banks; 385 u8 n_dice; 386 u8 die_erase_opcode; 387 u32 *vreg_offset; 388 389 struct spi_nor_hwcaps hwcaps; 390 struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; 391 struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; 392 393 struct spi_nor_erase_map erase_map; 394 struct spi_nor_otp otp; 395 396 int (*set_octal_dtr)(struct spi_nor *nor, bool enable); 397 int (*quad_enable)(struct spi_nor *nor); 398 int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable); 399 int (*ready)(struct spi_nor *nor); 400 401 const struct spi_nor_locking_ops *locking_ops; 402 void *priv; 403 }; 404 405 /** 406 * struct spi_nor_fixups - SPI NOR fixup hooks 407 * @default_init: called after default flash parameters init. Used to tweak 408 * flash parameters when information provided by the flash_info 409 * table is incomplete or wrong. 410 * @post_bfpt: called after the BFPT table has been parsed 411 * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs 412 * that do not support RDSFDP). Typically used to tweak various 413 * parameters that could not be extracted by other means (i.e. 414 * when information provided by the SFDP/flash_info tables are 415 * incomplete or wrong). 416 * @late_init: used to initialize flash parameters that are not declared in the 417 * JESD216 SFDP standard, or where SFDP tables not defined at all. 418 * Will replace the default_init() hook. 419 * 420 * Those hooks can be used to tweak the SPI NOR configuration when the SFDP 421 * table is broken or not available. 422 */ 423 struct spi_nor_fixups { 424 void (*default_init)(struct spi_nor *nor); 425 int (*post_bfpt)(struct spi_nor *nor, 426 const struct sfdp_parameter_header *bfpt_header, 427 const struct sfdp_bfpt *bfpt); 428 int (*post_sfdp)(struct spi_nor *nor); 429 int (*late_init)(struct spi_nor *nor); 430 }; 431 432 /** 433 * struct spi_nor_id - SPI NOR flash ID. 434 * 435 * @bytes: the bytes returned by the flash when issuing command 9F. Typically, 436 * the first byte is the manufacturer ID code (see JEP106) and the next 437 * two bytes are a flash part specific ID. 438 * @len: the number of bytes of ID. 439 */ 440 struct spi_nor_id { 441 const u8 *bytes; 442 u8 len; 443 }; 444 445 /** 446 * struct flash_info - SPI NOR flash_info entry. 447 * @id: pointer to struct spi_nor_id or NULL, which means "no ID" (mostly 448 * older chips). 449 * @name: (obsolete) the name of the flash. Do not set it for new additions. 450 * @size: the size of the flash in bytes. 451 * @sector_size: (optional) the size listed here is what works with 452 * SPINOR_OP_SE, which isn't necessarily called a "sector" by 453 * the vendor. Defaults to 64k. 454 * @n_banks: (optional) the number of banks. Defaults to 1. 455 * @page_size: (optional) the flash's page size. Defaults to 256. 456 * @addr_nbytes: number of address bytes to send. 457 * 458 * @flags: flags that indicate support that is not defined by the 459 * JESD216 standard in its SFDP tables. Flag meanings: 460 * SPI_NOR_HAS_LOCK: flash supports lock/unlock via SR 461 * SPI_NOR_HAS_TB: flash SR has Top/Bottom (TB) protect bit. Must be 462 * used with SPI_NOR_HAS_LOCK. 463 * SPI_NOR_TB_SR_BIT6: Top/Bottom (TB) is bit 6 of status register. 464 * Must be used with SPI_NOR_HAS_TB. 465 * SPI_NOR_4BIT_BP: flash SR has 4 bit fields (BP0-3) for block 466 * protection. 467 * SPI_NOR_BP3_SR_BIT6: BP3 is bit 6 of status register. Must be used with 468 * SPI_NOR_4BIT_BP. 469 * SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits. 470 * Usually these will power-up in a write-protected 471 * state. 472 * SPI_NOR_NO_ERASE: no erase command needed. 473 * SPI_NOR_QUAD_PP: flash supports Quad Input Page Program. 474 * SPI_NOR_RWW: flash supports reads while write. 475 * 476 * @no_sfdp_flags: flags that indicate support that can be discovered via SFDP. 477 * Used when SFDP tables are not defined in the flash. These 478 * flags are used together with the SPI_NOR_SKIP_SFDP flag. 479 * SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables. 480 * SECT_4K: SPINOR_OP_BE_4K works uniformly. 481 * SPI_NOR_DUAL_READ: flash supports Dual Read. 482 * SPI_NOR_QUAD_READ: flash supports Quad Read. 483 * SPI_NOR_OCTAL_READ: flash supports Octal Read. 484 * SPI_NOR_OCTAL_DTR_READ: flash supports octal DTR Read. 485 * SPI_NOR_OCTAL_DTR_PP: flash supports Octal DTR Page Program. 486 * 487 * @fixup_flags: flags that indicate support that can be discovered via SFDP 488 * ideally, but can not be discovered for this particular flash 489 * because the SFDP table that indicates this support is not 490 * defined by the flash. In case the table for this support is 491 * defined but has wrong values, one should instead use a 492 * post_sfdp() hook to set the SNOR_F equivalent flag. 493 * 494 * SPI_NOR_4B_OPCODES: use dedicated 4byte address op codes to support 495 * memory size above 128Mib. 496 * SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode 497 * via a volatile bit. 498 * @mfr_flags: manufacturer private flags. Used in the manufacturer fixup 499 * hooks to differentiate support between flashes of the same 500 * manufacturer. 501 * @otp_org: flash's OTP organization. 502 * @fixups: part specific fixup hooks. 503 */ 504 struct flash_info { 505 char *name; 506 const struct spi_nor_id *id; 507 size_t size; 508 unsigned sector_size; 509 u16 page_size; 510 u8 n_banks; 511 u8 addr_nbytes; 512 513 u16 flags; 514 #define SPI_NOR_HAS_LOCK BIT(0) 515 #define SPI_NOR_HAS_TB BIT(1) 516 #define SPI_NOR_TB_SR_BIT6 BIT(2) 517 #define SPI_NOR_4BIT_BP BIT(3) 518 #define SPI_NOR_BP3_SR_BIT6 BIT(4) 519 #define SPI_NOR_SWP_IS_VOLATILE BIT(5) 520 #define SPI_NOR_NO_ERASE BIT(6) 521 #define SPI_NOR_QUAD_PP BIT(8) 522 #define SPI_NOR_RWW BIT(9) 523 524 u8 no_sfdp_flags; 525 #define SPI_NOR_SKIP_SFDP BIT(0) 526 #define SECT_4K BIT(1) 527 #define SPI_NOR_DUAL_READ BIT(3) 528 #define SPI_NOR_QUAD_READ BIT(4) 529 #define SPI_NOR_OCTAL_READ BIT(5) 530 #define SPI_NOR_OCTAL_DTR_READ BIT(6) 531 #define SPI_NOR_OCTAL_DTR_PP BIT(7) 532 533 u8 fixup_flags; 534 #define SPI_NOR_4B_OPCODES BIT(0) 535 #define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1) 536 537 u8 mfr_flags; 538 539 const struct spi_nor_otp_organization *otp; 540 const struct spi_nor_fixups *fixups; 541 }; 542 543 #define SNOR_ID(...) \ 544 (&(const struct spi_nor_id){ \ 545 .bytes = (const u8[]){ __VA_ARGS__ }, \ 546 .len = sizeof((u8[]){ __VA_ARGS__ }), \ 547 }) 548 549 #define SNOR_OTP(_len, _n_regions, _base, _offset) \ 550 (&(const struct spi_nor_otp_organization){ \ 551 .len = (_len), \ 552 .base = (_base), \ 553 .offset = (_offset), \ 554 .n_regions = (_n_regions), \ 555 }) 556 557 /** 558 * struct spi_nor_manufacturer - SPI NOR manufacturer object 559 * @name: manufacturer name 560 * @parts: array of parts supported by this manufacturer 561 * @nparts: number of entries in the parts array 562 * @fixups: hooks called at various points in time during spi_nor_scan() 563 */ 564 struct spi_nor_manufacturer { 565 const char *name; 566 const struct flash_info *parts; 567 unsigned int nparts; 568 const struct spi_nor_fixups *fixups; 569 }; 570 571 /** 572 * struct sfdp - SFDP data 573 * @num_dwords: number of entries in the dwords array 574 * @dwords: array of double words of the SFDP data 575 */ 576 struct sfdp { 577 size_t num_dwords; 578 u32 *dwords; 579 }; 580 581 /* Manufacturer drivers. */ 582 extern const struct spi_nor_manufacturer spi_nor_atmel; 583 extern const struct spi_nor_manufacturer spi_nor_eon; 584 extern const struct spi_nor_manufacturer spi_nor_esmt; 585 extern const struct spi_nor_manufacturer spi_nor_everspin; 586 extern const struct spi_nor_manufacturer spi_nor_gigadevice; 587 extern const struct spi_nor_manufacturer spi_nor_intel; 588 extern const struct spi_nor_manufacturer spi_nor_issi; 589 extern const struct spi_nor_manufacturer spi_nor_macronix; 590 extern const struct spi_nor_manufacturer spi_nor_micron; 591 extern const struct spi_nor_manufacturer spi_nor_st; 592 extern const struct spi_nor_manufacturer spi_nor_spansion; 593 extern const struct spi_nor_manufacturer spi_nor_sst; 594 extern const struct spi_nor_manufacturer spi_nor_winbond; 595 extern const struct spi_nor_manufacturer spi_nor_xmc; 596 597 extern const struct attribute_group *spi_nor_sysfs_groups[]; 598 599 void spi_nor_spimem_setup_op(const struct spi_nor *nor, 600 struct spi_mem_op *op, 601 const enum spi_nor_protocol proto); 602 int spi_nor_write_enable(struct spi_nor *nor); 603 int spi_nor_write_disable(struct spi_nor *nor); 604 int spi_nor_set_4byte_addr_mode_en4b_ex4b(struct spi_nor *nor, bool enable); 605 int spi_nor_set_4byte_addr_mode_wren_en4b_ex4b(struct spi_nor *nor, 606 bool enable); 607 int spi_nor_set_4byte_addr_mode_brwr(struct spi_nor *nor, bool enable); 608 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable); 609 int spi_nor_wait_till_ready(struct spi_nor *nor); 610 int spi_nor_global_block_unlock(struct spi_nor *nor); 611 int spi_nor_prep_and_lock(struct spi_nor *nor); 612 void spi_nor_unlock_and_unprep(struct spi_nor *nor); 613 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor); 614 int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor); 615 int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor); 616 int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id, 617 enum spi_nor_protocol reg_proto); 618 int spi_nor_read_sr(struct spi_nor *nor, u8 *sr); 619 int spi_nor_sr_ready(struct spi_nor *nor); 620 int spi_nor_read_cr(struct spi_nor *nor, u8 *cr); 621 int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len); 622 int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1); 623 int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr); 624 625 ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, 626 u8 *buf); 627 ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, 628 const u8 *buf); 629 int spi_nor_read_any_reg(struct spi_nor *nor, struct spi_mem_op *op, 630 enum spi_nor_protocol proto); 631 int spi_nor_write_any_volatile_reg(struct spi_nor *nor, struct spi_mem_op *op, 632 enum spi_nor_protocol proto); 633 int spi_nor_erase_sector(struct spi_nor *nor, u32 addr); 634 635 int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf); 636 int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len, 637 const u8 *buf); 638 int spi_nor_otp_erase_secr(struct spi_nor *nor, loff_t addr); 639 int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region); 640 int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region); 641 642 int spi_nor_hwcaps_read2cmd(u32 hwcaps); 643 int spi_nor_hwcaps_pp2cmd(u32 hwcaps); 644 u8 spi_nor_convert_3to4_read(u8 opcode); 645 void spi_nor_set_read_settings(struct spi_nor_read_command *read, 646 u8 num_mode_clocks, 647 u8 num_wait_states, 648 u8 opcode, 649 enum spi_nor_protocol proto); 650 void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode, 651 enum spi_nor_protocol proto); 652 653 void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size, 654 u8 opcode); 655 void spi_nor_mask_erase_type(struct spi_nor_erase_type *erase); 656 void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, 657 u8 erase_mask, u64 flash_size); 658 659 int spi_nor_post_bfpt_fixups(struct spi_nor *nor, 660 const struct sfdp_parameter_header *bfpt_header, 661 const struct sfdp_bfpt *bfpt); 662 663 void spi_nor_init_default_locking_ops(struct spi_nor *nor); 664 void spi_nor_try_unlock_all(struct spi_nor *nor); 665 void spi_nor_set_mtd_locking_ops(struct spi_nor *nor); 666 void spi_nor_set_mtd_otp_ops(struct spi_nor *nor); 667 668 int spi_nor_controller_ops_read_reg(struct spi_nor *nor, u8 opcode, 669 u8 *buf, size_t len); 670 int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode, 671 const u8 *buf, size_t len); 672 673 int spi_nor_check_sfdp_signature(struct spi_nor *nor); 674 int spi_nor_parse_sfdp(struct spi_nor *nor); 675 676 static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) 677 { 678 return container_of(mtd, struct spi_nor, mtd); 679 } 680 681 /** 682 * spi_nor_needs_sfdp() - returns true if SFDP parsing is used for this flash. 683 * 684 * Return: true if SFDP parsing is needed 685 */ 686 static inline bool spi_nor_needs_sfdp(const struct spi_nor *nor) 687 { 688 /* 689 * The flash size is one property parsed by the SFDP. We use it as an 690 * indicator whether we need SFDP parsing for a particular flash. I.e. 691 * non-legacy flash entries in flash_info will have a size of zero iff 692 * SFDP should be used. 693 */ 694 return !nor->info->size; 695 } 696 697 #ifdef CONFIG_DEBUG_FS 698 void spi_nor_debugfs_register(struct spi_nor *nor); 699 void spi_nor_debugfs_shutdown(void); 700 #else 701 static inline void spi_nor_debugfs_register(struct spi_nor *nor) {} 702 static inline void spi_nor_debugfs_shutdown(void) {} 703 #endif 704 705 #endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */ 706