1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (C) 2005, Intec Automation Inc. 4 * Copyright (C) 2014, Freescale Semiconductor, Inc. 5 */ 6 7 #ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H 8 #define __LINUX_MTD_SPI_NOR_INTERNAL_H 9 10 #include "sfdp.h" 11 12 #define SPI_NOR_MAX_ID_LEN 6 13 14 /* Standard SPI NOR flash operations. */ 15 #define SPI_NOR_READID_OP(naddr, ndummy, buf, len) \ 16 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 0), \ 17 SPI_MEM_OP_ADDR(naddr, 0, 0), \ 18 SPI_MEM_OP_DUMMY(ndummy, 0), \ 19 SPI_MEM_OP_DATA_IN(len, buf, 0)) 20 21 #define SPI_NOR_WREN_OP \ 22 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 0), \ 23 SPI_MEM_OP_NO_ADDR, \ 24 SPI_MEM_OP_NO_DUMMY, \ 25 SPI_MEM_OP_NO_DATA) 26 27 #define SPI_NOR_WRDI_OP \ 28 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 0), \ 29 SPI_MEM_OP_NO_ADDR, \ 30 SPI_MEM_OP_NO_DUMMY, \ 31 SPI_MEM_OP_NO_DATA) 32 33 #define SPI_NOR_RDSR_OP(buf) \ 34 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 0), \ 35 SPI_MEM_OP_NO_ADDR, \ 36 SPI_MEM_OP_NO_DUMMY, \ 37 SPI_MEM_OP_DATA_IN(1, buf, 0)) 38 39 #define SPI_NOR_WRSR_OP(buf, len) \ 40 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 0), \ 41 SPI_MEM_OP_NO_ADDR, \ 42 SPI_MEM_OP_NO_DUMMY, \ 43 SPI_MEM_OP_DATA_OUT(len, buf, 0)) 44 45 #define SPI_NOR_RDSR2_OP(buf) \ 46 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 0), \ 47 SPI_MEM_OP_NO_ADDR, \ 48 SPI_MEM_OP_NO_DUMMY, \ 49 SPI_MEM_OP_DATA_OUT(1, buf, 0)) 50 51 #define SPI_NOR_WRSR2_OP(buf) \ 52 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 0), \ 53 SPI_MEM_OP_NO_ADDR, \ 54 SPI_MEM_OP_NO_DUMMY, \ 55 SPI_MEM_OP_DATA_OUT(1, buf, 0)) 56 57 #define SPI_NOR_RDCR_OP(buf) \ 58 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 0), \ 59 SPI_MEM_OP_NO_ADDR, \ 60 SPI_MEM_OP_NO_DUMMY, \ 61 SPI_MEM_OP_DATA_IN(1, buf, 0)) 62 63 #define SPI_NOR_EN4B_EX4B_OP(enable) \ 64 SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, 0), \ 65 SPI_MEM_OP_NO_ADDR, \ 66 SPI_MEM_OP_NO_DUMMY, \ 67 SPI_MEM_OP_NO_DATA) 68 69 #define SPI_NOR_BRWR_OP(buf) \ 70 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 0), \ 71 SPI_MEM_OP_NO_ADDR, \ 72 SPI_MEM_OP_NO_DUMMY, \ 73 SPI_MEM_OP_DATA_OUT(1, buf, 0)) 74 75 #define SPI_NOR_GBULK_OP \ 76 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_GBULK, 0), \ 77 SPI_MEM_OP_NO_ADDR, \ 78 SPI_MEM_OP_NO_DUMMY, \ 79 SPI_MEM_OP_NO_DATA) 80 81 #define SPI_NOR_CHIP_ERASE_OP \ 82 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 0), \ 83 SPI_MEM_OP_NO_ADDR, \ 84 SPI_MEM_OP_NO_DUMMY, \ 85 SPI_MEM_OP_NO_DATA) 86 87 #define SPI_NOR_SECTOR_ERASE_OP(opcode, addr_nbytes, addr) \ 88 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 89 SPI_MEM_OP_ADDR(addr_nbytes, addr, 0), \ 90 SPI_MEM_OP_NO_DUMMY, \ 91 SPI_MEM_OP_NO_DATA) 92 93 #define SPI_NOR_READ_OP(opcode) \ 94 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 95 SPI_MEM_OP_ADDR(3, 0, 0), \ 96 SPI_MEM_OP_DUMMY(1, 0), \ 97 SPI_MEM_OP_DATA_IN(2, NULL, 0)) 98 99 #define SPI_NOR_PP_OP(opcode) \ 100 SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0), \ 101 SPI_MEM_OP_ADDR(3, 0, 0), \ 102 SPI_MEM_OP_NO_DUMMY, \ 103 SPI_MEM_OP_DATA_OUT(2, NULL, 0)) 104 105 #define SPINOR_SRSTEN_OP \ 106 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0), \ 107 SPI_MEM_OP_NO_DUMMY, \ 108 SPI_MEM_OP_NO_ADDR, \ 109 SPI_MEM_OP_NO_DATA) 110 111 #define SPINOR_SRST_OP \ 112 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRST, 0), \ 113 SPI_MEM_OP_NO_DUMMY, \ 114 SPI_MEM_OP_NO_ADDR, \ 115 SPI_MEM_OP_NO_DATA) 116 117 /* Keep these in sync with the list in debugfs.c */ 118 enum spi_nor_option_flags { 119 SNOR_F_HAS_SR_TB = BIT(0), 120 SNOR_F_NO_OP_CHIP_ERASE = BIT(1), 121 SNOR_F_BROKEN_RESET = BIT(2), 122 SNOR_F_4B_OPCODES = BIT(3), 123 SNOR_F_HAS_4BAIT = BIT(4), 124 SNOR_F_HAS_LOCK = BIT(5), 125 SNOR_F_HAS_16BIT_SR = BIT(6), 126 SNOR_F_NO_READ_CR = BIT(7), 127 SNOR_F_HAS_SR_TB_BIT6 = BIT(8), 128 SNOR_F_HAS_4BIT_BP = BIT(9), 129 SNOR_F_HAS_SR_BP3_BIT6 = BIT(10), 130 SNOR_F_IO_MODE_EN_VOLATILE = BIT(11), 131 SNOR_F_SOFT_RESET = BIT(12), 132 SNOR_F_SWP_IS_VOLATILE = BIT(13), 133 }; 134 135 struct spi_nor_read_command { 136 u8 num_mode_clocks; 137 u8 num_wait_states; 138 u8 opcode; 139 enum spi_nor_protocol proto; 140 }; 141 142 struct spi_nor_pp_command { 143 u8 opcode; 144 enum spi_nor_protocol proto; 145 }; 146 147 enum spi_nor_read_command_index { 148 SNOR_CMD_READ, 149 SNOR_CMD_READ_FAST, 150 SNOR_CMD_READ_1_1_1_DTR, 151 152 /* Dual SPI */ 153 SNOR_CMD_READ_1_1_2, 154 SNOR_CMD_READ_1_2_2, 155 SNOR_CMD_READ_2_2_2, 156 SNOR_CMD_READ_1_2_2_DTR, 157 158 /* Quad SPI */ 159 SNOR_CMD_READ_1_1_4, 160 SNOR_CMD_READ_1_4_4, 161 SNOR_CMD_READ_4_4_4, 162 SNOR_CMD_READ_1_4_4_DTR, 163 164 /* Octal SPI */ 165 SNOR_CMD_READ_1_1_8, 166 SNOR_CMD_READ_1_8_8, 167 SNOR_CMD_READ_8_8_8, 168 SNOR_CMD_READ_1_8_8_DTR, 169 SNOR_CMD_READ_8_8_8_DTR, 170 171 SNOR_CMD_READ_MAX 172 }; 173 174 enum spi_nor_pp_command_index { 175 SNOR_CMD_PP, 176 177 /* Quad SPI */ 178 SNOR_CMD_PP_1_1_4, 179 SNOR_CMD_PP_1_4_4, 180 SNOR_CMD_PP_4_4_4, 181 182 /* Octal SPI */ 183 SNOR_CMD_PP_1_1_8, 184 SNOR_CMD_PP_1_8_8, 185 SNOR_CMD_PP_8_8_8, 186 SNOR_CMD_PP_8_8_8_DTR, 187 188 SNOR_CMD_PP_MAX 189 }; 190 191 /** 192 * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type 193 * @size: the size of the sector/block erased by the erase type. 194 * JEDEC JESD216B imposes erase sizes to be a power of 2. 195 * @size_shift: @size is a power of 2, the shift is stored in 196 * @size_shift. 197 * @size_mask: the size mask based on @size_shift. 198 * @opcode: the SPI command op code to erase the sector/block. 199 * @idx: Erase Type index as sorted in the Basic Flash Parameter 200 * Table. It will be used to synchronize the supported 201 * Erase Types with the ones identified in the SFDP 202 * optional tables. 203 */ 204 struct spi_nor_erase_type { 205 u32 size; 206 u32 size_shift; 207 u32 size_mask; 208 u8 opcode; 209 u8 idx; 210 }; 211 212 /** 213 * struct spi_nor_erase_command - Used for non-uniform erases 214 * The structure is used to describe a list of erase commands to be executed 215 * once we validate that the erase can be performed. The elements in the list 216 * are run-length encoded. 217 * @list: for inclusion into the list of erase commands. 218 * @count: how many times the same erase command should be 219 * consecutively used. 220 * @size: the size of the sector/block erased by the command. 221 * @opcode: the SPI command op code to erase the sector/block. 222 */ 223 struct spi_nor_erase_command { 224 struct list_head list; 225 u32 count; 226 u32 size; 227 u8 opcode; 228 }; 229 230 /** 231 * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region 232 * @offset: the offset in the data array of erase region start. 233 * LSB bits are used as a bitmask encoding flags to 234 * determine if this region is overlaid, if this region is 235 * the last in the SPI NOR flash memory and to indicate 236 * all the supported erase commands inside this region. 237 * The erase types are sorted in ascending order with the 238 * smallest Erase Type size being at BIT(0). 239 * @size: the size of the region in bytes. 240 */ 241 struct spi_nor_erase_region { 242 u64 offset; 243 u64 size; 244 }; 245 246 #define SNOR_ERASE_TYPE_MAX 4 247 #define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0) 248 249 #define SNOR_LAST_REGION BIT(4) 250 #define SNOR_OVERLAID_REGION BIT(5) 251 252 #define SNOR_ERASE_FLAGS_MAX 6 253 #define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0) 254 255 /** 256 * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map 257 * @regions: array of erase regions. The regions are consecutive in 258 * address space. Walking through the regions is done 259 * incrementally. 260 * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform 261 * sector size (legacy implementation). 262 * @erase_type: an array of erase types shared by all the regions. 263 * The erase types are sorted in ascending order, with the 264 * smallest Erase Type size being the first member in the 265 * erase_type array. 266 * @uniform_erase_type: bitmask encoding erase types that can erase the 267 * entire memory. This member is completed at init by 268 * uniform and non-uniform SPI NOR flash memories if they 269 * support at least one erase type that can erase the 270 * entire memory. 271 */ 272 struct spi_nor_erase_map { 273 struct spi_nor_erase_region *regions; 274 struct spi_nor_erase_region uniform_region; 275 struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX]; 276 u8 uniform_erase_type; 277 }; 278 279 /** 280 * struct spi_nor_locking_ops - SPI NOR locking methods 281 * @lock: lock a region of the SPI NOR. 282 * @unlock: unlock a region of the SPI NOR. 283 * @is_locked: check if a region of the SPI NOR is completely locked 284 */ 285 struct spi_nor_locking_ops { 286 int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); 287 int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); 288 int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); 289 }; 290 291 /** 292 * struct spi_nor_otp_organization - Structure to describe the SPI NOR OTP regions 293 * @len: size of one OTP region in bytes. 294 * @base: start address of the OTP area. 295 * @offset: offset between consecutive OTP regions if there are more 296 * than one. 297 * @n_regions: number of individual OTP regions. 298 */ 299 struct spi_nor_otp_organization { 300 size_t len; 301 loff_t base; 302 loff_t offset; 303 unsigned int n_regions; 304 }; 305 306 /** 307 * struct spi_nor_otp_ops - SPI NOR OTP methods 308 * @read: read from the SPI NOR OTP area. 309 * @write: write to the SPI NOR OTP area. 310 * @lock: lock an OTP region. 311 * @erase: erase an OTP region. 312 * @is_locked: check if an OTP region of the SPI NOR is locked. 313 */ 314 struct spi_nor_otp_ops { 315 int (*read)(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf); 316 int (*write)(struct spi_nor *nor, loff_t addr, size_t len, 317 const u8 *buf); 318 int (*lock)(struct spi_nor *nor, unsigned int region); 319 int (*erase)(struct spi_nor *nor, loff_t addr); 320 int (*is_locked)(struct spi_nor *nor, unsigned int region); 321 }; 322 323 /** 324 * struct spi_nor_otp - SPI NOR OTP grouping structure 325 * @org: OTP region organization 326 * @ops: OTP access ops 327 */ 328 struct spi_nor_otp { 329 const struct spi_nor_otp_organization *org; 330 const struct spi_nor_otp_ops *ops; 331 }; 332 333 /** 334 * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings. 335 * Includes legacy flash parameters and settings that can be overwritten 336 * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216 337 * Serial Flash Discoverable Parameters (SFDP) tables. 338 * 339 * @size: the flash memory density in bytes. 340 * @writesize Minimal writable flash unit size. Defaults to 1. Set to 341 * ECC unit size for ECC-ed flashes. 342 * @page_size: the page size of the SPI NOR flash memory. 343 * @addr_nbytes: number of address bytes to send. 344 * @addr_mode_nbytes: number of address bytes of current address mode. Useful 345 * when the flash operates with 4B opcodes but needs the 346 * internal address mode for opcodes that don't have a 4B 347 * opcode correspondent. 348 * @rdsr_dummy: dummy cycles needed for Read Status Register command 349 * in octal DTR mode. 350 * @rdsr_addr_nbytes: dummy address bytes needed for Read Status Register 351 * command in octal DTR mode. 352 * @hwcaps: describes the read and page program hardware 353 * capabilities. 354 * @reads: read capabilities ordered by priority: the higher index 355 * in the array, the higher priority. 356 * @page_programs: page program capabilities ordered by priority: the 357 * higher index in the array, the higher priority. 358 * @erase_map: the erase map parsed from the SFDP Sector Map Parameter 359 * Table. 360 * @otp: SPI NOR OTP info. 361 * @octal_dtr_enable: enables SPI NOR octal DTR mode. 362 * @quad_enable: enables SPI NOR quad mode. 363 * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode. 364 * @convert_addr: converts an absolute address into something the flash 365 * will understand. Particularly useful when pagesize is 366 * not a power-of-2. 367 * @setup: (optional) configures the SPI NOR memory. Useful for 368 * SPI NOR flashes that have peculiarities to the SPI NOR 369 * standard e.g. different opcodes, specific address 370 * calculation, page size, etc. 371 * @ready: (optional) flashes might use a different mechanism 372 * than reading the status register to indicate they 373 * are ready for a new command 374 * @locking_ops: SPI NOR locking methods. 375 */ 376 struct spi_nor_flash_parameter { 377 u64 size; 378 u32 writesize; 379 u32 page_size; 380 u8 addr_nbytes; 381 u8 addr_mode_nbytes; 382 u8 rdsr_dummy; 383 u8 rdsr_addr_nbytes; 384 385 struct spi_nor_hwcaps hwcaps; 386 struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; 387 struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; 388 389 struct spi_nor_erase_map erase_map; 390 struct spi_nor_otp otp; 391 392 int (*octal_dtr_enable)(struct spi_nor *nor, bool enable); 393 int (*quad_enable)(struct spi_nor *nor); 394 int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable); 395 u32 (*convert_addr)(struct spi_nor *nor, u32 addr); 396 int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps); 397 int (*ready)(struct spi_nor *nor); 398 399 const struct spi_nor_locking_ops *locking_ops; 400 }; 401 402 /** 403 * struct spi_nor_fixups - SPI NOR fixup hooks 404 * @default_init: called after default flash parameters init. Used to tweak 405 * flash parameters when information provided by the flash_info 406 * table is incomplete or wrong. 407 * @post_bfpt: called after the BFPT table has been parsed 408 * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs 409 * that do not support RDSFDP). Typically used to tweak various 410 * parameters that could not be extracted by other means (i.e. 411 * when information provided by the SFDP/flash_info tables are 412 * incomplete or wrong). 413 * @late_init: used to initialize flash parameters that are not declared in the 414 * JESD216 SFDP standard, or where SFDP tables not defined at all. 415 * Will replace the default_init() hook. 416 * 417 * Those hooks can be used to tweak the SPI NOR configuration when the SFDP 418 * table is broken or not available. 419 */ 420 struct spi_nor_fixups { 421 void (*default_init)(struct spi_nor *nor); 422 int (*post_bfpt)(struct spi_nor *nor, 423 const struct sfdp_parameter_header *bfpt_header, 424 const struct sfdp_bfpt *bfpt); 425 void (*post_sfdp)(struct spi_nor *nor); 426 void (*late_init)(struct spi_nor *nor); 427 }; 428 429 /** 430 * struct flash_info - SPI NOR flash_info entry. 431 * @name: the name of the flash. 432 * @id: the flash's ID bytes. The first three bytes are the 433 * JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips). 434 * @id_len: the number of bytes of ID. 435 * @sector_size: the size listed here is what works with SPINOR_OP_SE, which 436 * isn't necessarily called a "sector" by the vendor. 437 * @n_sectors: the number of sectors. 438 * @page_size: the flash's page size. 439 * @addr_nbytes: number of address bytes to send. 440 * 441 * @parse_sfdp: true when flash supports SFDP tables. The false value has no 442 * meaning. If one wants to skip the SFDP tables, one should 443 * instead use the SPI_NOR_SKIP_SFDP sfdp_flag. 444 * @flags: flags that indicate support that is not defined by the 445 * JESD216 standard in its SFDP tables. Flag meanings: 446 * SPI_NOR_HAS_LOCK: flash supports lock/unlock via SR 447 * SPI_NOR_HAS_TB: flash SR has Top/Bottom (TB) protect bit. Must be 448 * used with SPI_NOR_HAS_LOCK. 449 * SPI_NOR_TB_SR_BIT6: Top/Bottom (TB) is bit 6 of status register. 450 * Must be used with SPI_NOR_HAS_TB. 451 * SPI_NOR_4BIT_BP: flash SR has 4 bit fields (BP0-3) for block 452 * protection. 453 * SPI_NOR_BP3_SR_BIT6: BP3 is bit 6 of status register. Must be used with 454 * SPI_NOR_4BIT_BP. 455 * SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits. 456 * Usually these will power-up in a write-protected 457 * state. 458 * SPI_NOR_NO_ERASE: no erase command needed. 459 * NO_CHIP_ERASE: chip does not support chip erase. 460 * SPI_NOR_NO_FR: can't do fastread. 461 * 462 * @no_sfdp_flags: flags that indicate support that can be discovered via SFDP. 463 * Used when SFDP tables are not defined in the flash. These 464 * flags are used together with the SPI_NOR_SKIP_SFDP flag. 465 * SPI_NOR_SKIP_SFDP: skip parsing of SFDP tables. 466 * SECT_4K: SPINOR_OP_BE_4K works uniformly. 467 * SPI_NOR_DUAL_READ: flash supports Dual Read. 468 * SPI_NOR_QUAD_READ: flash supports Quad Read. 469 * SPI_NOR_OCTAL_READ: flash supports Octal Read. 470 * SPI_NOR_OCTAL_DTR_READ: flash supports octal DTR Read. 471 * SPI_NOR_OCTAL_DTR_PP: flash supports Octal DTR Page Program. 472 * 473 * @fixup_flags: flags that indicate support that can be discovered via SFDP 474 * ideally, but can not be discovered for this particular flash 475 * because the SFDP table that indicates this support is not 476 * defined by the flash. In case the table for this support is 477 * defined but has wrong values, one should instead use a 478 * post_sfdp() hook to set the SNOR_F equivalent flag. 479 * 480 * SPI_NOR_4B_OPCODES: use dedicated 4byte address op codes to support 481 * memory size above 128Mib. 482 * SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode 483 * via a volatile bit. 484 * @mfr_flags: manufacturer private flags. Used in the manufacturer fixup 485 * hooks to differentiate support between flashes of the same 486 * manufacturer. 487 * @otp_org: flash's OTP organization. 488 * @fixups: part specific fixup hooks. 489 */ 490 struct flash_info { 491 char *name; 492 u8 id[SPI_NOR_MAX_ID_LEN]; 493 u8 id_len; 494 unsigned sector_size; 495 u16 n_sectors; 496 u16 page_size; 497 u8 addr_nbytes; 498 499 bool parse_sfdp; 500 u16 flags; 501 #define SPI_NOR_HAS_LOCK BIT(0) 502 #define SPI_NOR_HAS_TB BIT(1) 503 #define SPI_NOR_TB_SR_BIT6 BIT(2) 504 #define SPI_NOR_4BIT_BP BIT(3) 505 #define SPI_NOR_BP3_SR_BIT6 BIT(4) 506 #define SPI_NOR_SWP_IS_VOLATILE BIT(5) 507 #define SPI_NOR_NO_ERASE BIT(6) 508 #define NO_CHIP_ERASE BIT(7) 509 #define SPI_NOR_NO_FR BIT(8) 510 511 u8 no_sfdp_flags; 512 #define SPI_NOR_SKIP_SFDP BIT(0) 513 #define SECT_4K BIT(1) 514 #define SPI_NOR_DUAL_READ BIT(3) 515 #define SPI_NOR_QUAD_READ BIT(4) 516 #define SPI_NOR_OCTAL_READ BIT(5) 517 #define SPI_NOR_OCTAL_DTR_READ BIT(6) 518 #define SPI_NOR_OCTAL_DTR_PP BIT(7) 519 520 u8 fixup_flags; 521 #define SPI_NOR_4B_OPCODES BIT(0) 522 #define SPI_NOR_IO_MODE_EN_VOLATILE BIT(1) 523 524 u8 mfr_flags; 525 526 const struct spi_nor_otp_organization otp_org; 527 const struct spi_nor_fixups *fixups; 528 }; 529 530 /* Used when the "_ext_id" is two bytes at most */ 531 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors) \ 532 .id = { \ 533 ((_jedec_id) >> 16) & 0xff, \ 534 ((_jedec_id) >> 8) & 0xff, \ 535 (_jedec_id) & 0xff, \ 536 ((_ext_id) >> 8) & 0xff, \ 537 (_ext_id) & 0xff, \ 538 }, \ 539 .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \ 540 .sector_size = (_sector_size), \ 541 .n_sectors = (_n_sectors), \ 542 .page_size = 256, \ 543 544 #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors) \ 545 .id = { \ 546 ((_jedec_id) >> 16) & 0xff, \ 547 ((_jedec_id) >> 8) & 0xff, \ 548 (_jedec_id) & 0xff, \ 549 ((_ext_id) >> 16) & 0xff, \ 550 ((_ext_id) >> 8) & 0xff, \ 551 (_ext_id) & 0xff, \ 552 }, \ 553 .id_len = 6, \ 554 .sector_size = (_sector_size), \ 555 .n_sectors = (_n_sectors), \ 556 .page_size = 256, \ 557 558 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes) \ 559 .sector_size = (_sector_size), \ 560 .n_sectors = (_n_sectors), \ 561 .page_size = (_page_size), \ 562 .addr_nbytes = (_addr_nbytes), \ 563 .flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \ 564 565 #define OTP_INFO(_len, _n_regions, _base, _offset) \ 566 .otp_org = { \ 567 .len = (_len), \ 568 .base = (_base), \ 569 .offset = (_offset), \ 570 .n_regions = (_n_regions), \ 571 }, 572 573 #define PARSE_SFDP \ 574 .parse_sfdp = true, \ 575 576 #define FLAGS(_flags) \ 577 .flags = (_flags), \ 578 579 #define NO_SFDP_FLAGS(_no_sfdp_flags) \ 580 .no_sfdp_flags = (_no_sfdp_flags), \ 581 582 #define FIXUP_FLAGS(_fixup_flags) \ 583 .fixup_flags = (_fixup_flags), \ 584 585 #define MFR_FLAGS(_mfr_flags) \ 586 .mfr_flags = (_mfr_flags), \ 587 588 /** 589 * struct spi_nor_manufacturer - SPI NOR manufacturer object 590 * @name: manufacturer name 591 * @parts: array of parts supported by this manufacturer 592 * @nparts: number of entries in the parts array 593 * @fixups: hooks called at various points in time during spi_nor_scan() 594 */ 595 struct spi_nor_manufacturer { 596 const char *name; 597 const struct flash_info *parts; 598 unsigned int nparts; 599 const struct spi_nor_fixups *fixups; 600 }; 601 602 /** 603 * struct sfdp - SFDP data 604 * @num_dwords: number of entries in the dwords array 605 * @dwords: array of double words of the SFDP data 606 */ 607 struct sfdp { 608 size_t num_dwords; 609 u32 *dwords; 610 }; 611 612 /* Manufacturer drivers. */ 613 extern const struct spi_nor_manufacturer spi_nor_atmel; 614 extern const struct spi_nor_manufacturer spi_nor_catalyst; 615 extern const struct spi_nor_manufacturer spi_nor_eon; 616 extern const struct spi_nor_manufacturer spi_nor_esmt; 617 extern const struct spi_nor_manufacturer spi_nor_everspin; 618 extern const struct spi_nor_manufacturer spi_nor_fujitsu; 619 extern const struct spi_nor_manufacturer spi_nor_gigadevice; 620 extern const struct spi_nor_manufacturer spi_nor_intel; 621 extern const struct spi_nor_manufacturer spi_nor_issi; 622 extern const struct spi_nor_manufacturer spi_nor_macronix; 623 extern const struct spi_nor_manufacturer spi_nor_micron; 624 extern const struct spi_nor_manufacturer spi_nor_st; 625 extern const struct spi_nor_manufacturer spi_nor_spansion; 626 extern const struct spi_nor_manufacturer spi_nor_sst; 627 extern const struct spi_nor_manufacturer spi_nor_winbond; 628 extern const struct spi_nor_manufacturer spi_nor_xilinx; 629 extern const struct spi_nor_manufacturer spi_nor_xmc; 630 631 extern const struct attribute_group *spi_nor_sysfs_groups[]; 632 633 void spi_nor_spimem_setup_op(const struct spi_nor *nor, 634 struct spi_mem_op *op, 635 const enum spi_nor_protocol proto); 636 int spi_nor_write_enable(struct spi_nor *nor); 637 int spi_nor_write_disable(struct spi_nor *nor); 638 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable); 639 int spi_nor_wait_till_ready(struct spi_nor *nor); 640 int spi_nor_global_block_unlock(struct spi_nor *nor); 641 int spi_nor_lock_and_prep(struct spi_nor *nor); 642 void spi_nor_unlock_and_unprep(struct spi_nor *nor); 643 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor); 644 int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor); 645 int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor); 646 int spi_nor_read_id(struct spi_nor *nor, u8 naddr, u8 ndummy, u8 *id, 647 enum spi_nor_protocol reg_proto); 648 int spi_nor_read_sr(struct spi_nor *nor, u8 *sr); 649 int spi_nor_sr_ready(struct spi_nor *nor); 650 int spi_nor_read_cr(struct spi_nor *nor, u8 *cr); 651 int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len); 652 int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1); 653 int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr); 654 655 ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, 656 u8 *buf); 657 ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, 658 const u8 *buf); 659 int spi_nor_read_any_reg(struct spi_nor *nor, struct spi_mem_op *op, 660 enum spi_nor_protocol proto); 661 int spi_nor_write_any_volatile_reg(struct spi_nor *nor, struct spi_mem_op *op, 662 enum spi_nor_protocol proto); 663 int spi_nor_erase_sector(struct spi_nor *nor, u32 addr); 664 665 int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, size_t len, u8 *buf); 666 int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, size_t len, 667 const u8 *buf); 668 int spi_nor_otp_erase_secr(struct spi_nor *nor, loff_t addr); 669 int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region); 670 int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region); 671 672 int spi_nor_hwcaps_read2cmd(u32 hwcaps); 673 int spi_nor_hwcaps_pp2cmd(u32 hwcaps); 674 u8 spi_nor_convert_3to4_read(u8 opcode); 675 void spi_nor_set_read_settings(struct spi_nor_read_command *read, 676 u8 num_mode_clocks, 677 u8 num_wait_states, 678 u8 opcode, 679 enum spi_nor_protocol proto); 680 void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode, 681 enum spi_nor_protocol proto); 682 683 void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size, 684 u8 opcode); 685 struct spi_nor_erase_region * 686 spi_nor_region_next(struct spi_nor_erase_region *region); 687 void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, 688 u8 erase_mask, u64 flash_size); 689 690 int spi_nor_post_bfpt_fixups(struct spi_nor *nor, 691 const struct sfdp_parameter_header *bfpt_header, 692 const struct sfdp_bfpt *bfpt); 693 694 void spi_nor_init_default_locking_ops(struct spi_nor *nor); 695 void spi_nor_try_unlock_all(struct spi_nor *nor); 696 void spi_nor_set_mtd_locking_ops(struct spi_nor *nor); 697 void spi_nor_set_mtd_otp_ops(struct spi_nor *nor); 698 699 int spi_nor_controller_ops_read_reg(struct spi_nor *nor, u8 opcode, 700 u8 *buf, size_t len); 701 int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode, 702 const u8 *buf, size_t len); 703 704 static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) 705 { 706 return container_of(mtd, struct spi_nor, mtd); 707 } 708 709 #ifdef CONFIG_DEBUG_FS 710 void spi_nor_debugfs_register(struct spi_nor *nor); 711 #else 712 static inline void spi_nor_debugfs_register(struct spi_nor *nor) {} 713 #endif 714 715 #endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */ 716