xref: /linux/drivers/mtd/maps/scx200_docflash.c (revision 3d5271f9883cba7b54762bc4fe027d4172f06db7)
1 /* linux/drivers/mtd/maps/scx200_docflash.c
2 
3    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
4 
5    $Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
6 
7    National Semiconductor SCx200 flash mapped with DOCCS
8 */
9 
10 #include <linux/module.h>
11 #include <linux/config.h>
12 #include <linux/types.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <asm/io.h>
16 #include <linux/mtd/mtd.h>
17 #include <linux/mtd/map.h>
18 #include <linux/mtd/partitions.h>
19 
20 #include <linux/pci.h>
21 #include <linux/scx200.h>
22 
23 #define NAME "scx200_docflash"
24 
25 MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
26 MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
27 MODULE_LICENSE("GPL");
28 
29 static int probe = 0;		/* Don't autoprobe */
30 static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */
31 static unsigned width = 8;	/* Default to 8 bits wide */
32 static char *flashtype = "cfi_probe";
33 
34 module_param(probe, int, 0);
35 MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
36 module_param(size, int, 0);
37 MODULE_PARM_DESC(size, "Size of the flash mapping");
38 module_param(width, int, 0);
39 MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
40 module_param(flashtype, charp, 0);
41 MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");
42 
43 static struct resource docmem = {
44 	.flags = IORESOURCE_MEM,
45 	.name  = "NatSemi SCx200 DOCCS Flash",
46 };
47 
48 static struct mtd_info *mymtd;
49 
50 #ifdef CONFIG_MTD_PARTITIONS
51 static struct mtd_partition partition_info[] = {
52 	{
53 		.name   = "DOCCS Boot kernel",
54 		.offset = 0,
55 		.size   = 0xc0000
56 	},
57 	{
58 		.name   = "DOCCS Low BIOS",
59 		.offset = 0xc0000,
60 		.size   = 0x40000
61 	},
62 	{
63 		.name   = "DOCCS File system",
64 		.offset = 0x100000,
65 		.size   = ~0	/* calculate from flash size */
66 	},
67 	{
68 		.name   = "DOCCS High BIOS",
69 		.offset = ~0, 	/* calculate from flash size */
70 		.size   = 0x80000
71 	},
72 };
73 #define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
74 #endif
75 
76 
77 static struct map_info scx200_docflash_map = {
78 	.name      = "NatSemi SCx200 DOCCS Flash",
79 };
80 
81 static int __init init_scx200_docflash(void)
82 {
83 	unsigned u;
84 	unsigned base;
85 	unsigned ctrl;
86 	unsigned pmr;
87 	struct pci_dev *bridge;
88 
89 	printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
90 
91 	if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
92 				      PCI_DEVICE_ID_NS_SCx200_BRIDGE,
93 				      NULL)) == NULL)
94 		return -ENODEV;
95 
96 	/* check that we have found the configuration block */
97 	if (!scx200_cb_present())
98 		return -ENODEV;
99 
100 	if (probe) {
101 		/* Try to use the present flash mapping if any */
102 		pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
103 		pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
104 		pmr = inl(scx200_cb_base + SCx200_PMR);
105 
106 		if (base == 0
107 		    || (ctrl & 0x07000000) != 0x07000000
108 		    || (ctrl & 0x0007ffff) == 0)
109 			return -ENODEV;
110 
111 		size = ((ctrl&0x1fff)<<13) + (1<<13);
112 
113 		for (u = size; u > 1; u >>= 1)
114 			;
115 		if (u != 1)
116 			return -ENODEV;
117 
118 		if (pmr & (1<<6))
119 			width = 16;
120 		else
121 			width = 8;
122 
123 		docmem.start = base;
124 		docmem.end = base + size;
125 
126 		if (request_resource(&iomem_resource, &docmem)) {
127 			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
128 			return -ENOMEM;
129 		}
130 	} else {
131 		for (u = size; u > 1; u >>= 1)
132 			;
133 		if (u != 1) {
134 			printk(KERN_ERR NAME ": invalid size for flash mapping\n");
135 			return -EINVAL;
136 		}
137 
138 		if (width != 8 && width != 16) {
139 			printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
140 			return -EINVAL;
141 		}
142 
143 		if (allocate_resource(&iomem_resource, &docmem,
144 				      size,
145 				      0xc0000000, 0xffffffff,
146 				      size, NULL, NULL)) {
147 			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
148 			return -ENOMEM;
149 		}
150 
151 		ctrl = 0x07000000 | ((size-1) >> 13);
152 
153 		printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
154 
155 		pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
156 		pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
157 		pmr = inl(scx200_cb_base + SCx200_PMR);
158 
159 		if (width == 8) {
160 			pmr &= ~(1<<6);
161 		} else {
162 			pmr |= (1<<6);
163 		}
164 		outl(pmr, scx200_cb_base + SCx200_PMR);
165 	}
166 
167        	printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n",
168 	       docmem.start, docmem.end, width);
169 
170 	scx200_docflash_map.size = size;
171 	if (width == 8)
172 		scx200_docflash_map.bankwidth = 1;
173 	else
174 		scx200_docflash_map.bankwidth = 2;
175 
176 	simple_map_init(&scx200_docflash_map);
177 
178 	scx200_docflash_map.phys = docmem.start;
179 	scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size);
180 	if (!scx200_docflash_map.virt) {
181 		printk(KERN_ERR NAME ": failed to ioremap the flash\n");
182 		release_resource(&docmem);
183 		return -EIO;
184 	}
185 
186 	mymtd = do_map_probe(flashtype, &scx200_docflash_map);
187 	if (!mymtd) {
188 		printk(KERN_ERR NAME ": unable to detect flash\n");
189 		iounmap(scx200_docflash_map.virt);
190 		release_resource(&docmem);
191 		return -ENXIO;
192 	}
193 
194 	if (size < mymtd->size)
195 		printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
196 
197 	mymtd->owner = THIS_MODULE;
198 
199 #ifdef CONFIG_MTD_PARTITIONS
200 	partition_info[3].offset = mymtd->size-partition_info[3].size;
201 	partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
202 	add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
203 #else
204 	add_mtd_device(mymtd);
205 #endif
206 	return 0;
207 }
208 
209 static void __exit cleanup_scx200_docflash(void)
210 {
211 	if (mymtd) {
212 #ifdef CONFIG_MTD_PARTITIONS
213 		del_mtd_partitions(mymtd);
214 #else
215 		del_mtd_device(mymtd);
216 #endif
217 		map_destroy(mymtd);
218 	}
219 	if (scx200_docflash_map.virt) {
220 		iounmap(scx200_docflash_map.virt);
221 		release_resource(&docmem);
222 	}
223 }
224 
225 module_init(init_scx200_docflash);
226 module_exit(cleanup_scx200_docflash);
227 
228 /*
229     Local variables:
230         compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules"
231         c-basic-offset: 8
232     End:
233 */
234