xref: /linux/drivers/mtd/devices/sst25l.c (revision c4ee0af3fa0dc65f690fc908f02b8355f9576ea0)
1 /*
2  * sst25l.c
3  *
4  * Driver for SST25L SPI Flash chips
5  *
6  * Copyright © 2009 Bluewater Systems Ltd
7  * Author: Andre Renaud <andre@bluewatersys.com>
8  * Author: Ryan Mallon
9  *
10  * Based on m25p80.c
11  *
12  * This code is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  *
16  */
17 
18 #include <linux/init.h>
19 #include <linux/module.h>
20 #include <linux/device.h>
21 #include <linux/mutex.h>
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <linux/sched.h>
25 
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/partitions.h>
28 
29 #include <linux/spi/spi.h>
30 #include <linux/spi/flash.h>
31 
32 /* Erases can take up to 3 seconds! */
33 #define MAX_READY_WAIT_JIFFIES	msecs_to_jiffies(3000)
34 
35 #define SST25L_CMD_WRSR		0x01	/* Write status register */
36 #define SST25L_CMD_WRDI		0x04	/* Write disable */
37 #define SST25L_CMD_RDSR		0x05	/* Read status register */
38 #define SST25L_CMD_WREN		0x06	/* Write enable */
39 #define SST25L_CMD_READ		0x03	/* High speed read */
40 
41 #define SST25L_CMD_EWSR		0x50	/* Enable write status register */
42 #define SST25L_CMD_SECTOR_ERASE	0x20	/* Erase sector */
43 #define SST25L_CMD_READ_ID	0x90	/* Read device ID */
44 #define SST25L_CMD_AAI_PROGRAM	0xaf	/* Auto address increment */
45 
46 #define SST25L_STATUS_BUSY	(1 << 0)	/* Chip is busy */
47 #define SST25L_STATUS_WREN	(1 << 1)	/* Write enabled */
48 #define SST25L_STATUS_BP0	(1 << 2)	/* Block protection 0 */
49 #define SST25L_STATUS_BP1	(1 << 3)	/* Block protection 1 */
50 
51 struct sst25l_flash {
52 	struct spi_device	*spi;
53 	struct mutex		lock;
54 	struct mtd_info		mtd;
55 };
56 
57 struct flash_info {
58 	const char		*name;
59 	uint16_t		device_id;
60 	unsigned		page_size;
61 	unsigned		nr_pages;
62 	unsigned		erase_size;
63 };
64 
65 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
66 
67 static struct flash_info sst25l_flash_info[] = {
68 	{"sst25lf020a", 0xbf43, 256, 1024, 4096},
69 	{"sst25lf040a",	0xbf44,	256, 2048, 4096},
70 };
71 
72 static int sst25l_status(struct sst25l_flash *flash, int *status)
73 {
74 	struct spi_message m;
75 	struct spi_transfer t;
76 	unsigned char cmd_resp[2];
77 	int err;
78 
79 	spi_message_init(&m);
80 	memset(&t, 0, sizeof(struct spi_transfer));
81 
82 	cmd_resp[0] = SST25L_CMD_RDSR;
83 	cmd_resp[1] = 0xff;
84 	t.tx_buf = cmd_resp;
85 	t.rx_buf = cmd_resp;
86 	t.len = sizeof(cmd_resp);
87 	spi_message_add_tail(&t, &m);
88 	err = spi_sync(flash->spi, &m);
89 	if (err < 0)
90 		return err;
91 
92 	*status = cmd_resp[1];
93 	return 0;
94 }
95 
96 static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
97 {
98 	unsigned char command[2];
99 	int status, err;
100 
101 	command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
102 	err = spi_write(flash->spi, command, 1);
103 	if (err)
104 		return err;
105 
106 	command[0] = SST25L_CMD_EWSR;
107 	err = spi_write(flash->spi, command, 1);
108 	if (err)
109 		return err;
110 
111 	command[0] = SST25L_CMD_WRSR;
112 	command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
113 	err = spi_write(flash->spi, command, 2);
114 	if (err)
115 		return err;
116 
117 	if (enable) {
118 		err = sst25l_status(flash, &status);
119 		if (err)
120 			return err;
121 		if (!(status & SST25L_STATUS_WREN))
122 			return -EROFS;
123 	}
124 
125 	return 0;
126 }
127 
128 static int sst25l_wait_till_ready(struct sst25l_flash *flash)
129 {
130 	unsigned long deadline;
131 	int status, err;
132 
133 	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
134 	do {
135 		err = sst25l_status(flash, &status);
136 		if (err)
137 			return err;
138 		if (!(status & SST25L_STATUS_BUSY))
139 			return 0;
140 
141 		cond_resched();
142 	} while (!time_after_eq(jiffies, deadline));
143 
144 	return -ETIMEDOUT;
145 }
146 
147 static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
148 {
149 	unsigned char command[4];
150 	int err;
151 
152 	err = sst25l_write_enable(flash, 1);
153 	if (err)
154 		return err;
155 
156 	command[0] = SST25L_CMD_SECTOR_ERASE;
157 	command[1] = offset >> 16;
158 	command[2] = offset >> 8;
159 	command[3] = offset;
160 	err = spi_write(flash->spi, command, 4);
161 	if (err)
162 		return err;
163 
164 	err = sst25l_wait_till_ready(flash);
165 	if (err)
166 		return err;
167 
168 	return sst25l_write_enable(flash, 0);
169 }
170 
171 static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
172 {
173 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
174 	uint32_t addr, end;
175 	int err;
176 
177 	/* Sanity checks */
178 	if ((uint32_t)instr->len % mtd->erasesize)
179 		return -EINVAL;
180 
181 	if ((uint32_t)instr->addr % mtd->erasesize)
182 		return -EINVAL;
183 
184 	addr = instr->addr;
185 	end = addr + instr->len;
186 
187 	mutex_lock(&flash->lock);
188 
189 	err = sst25l_wait_till_ready(flash);
190 	if (err) {
191 		mutex_unlock(&flash->lock);
192 		return err;
193 	}
194 
195 	while (addr < end) {
196 		err = sst25l_erase_sector(flash, addr);
197 		if (err) {
198 			mutex_unlock(&flash->lock);
199 			instr->state = MTD_ERASE_FAILED;
200 			dev_err(&flash->spi->dev, "Erase failed\n");
201 			return err;
202 		}
203 
204 		addr += mtd->erasesize;
205 	}
206 
207 	mutex_unlock(&flash->lock);
208 
209 	instr->state = MTD_ERASE_DONE;
210 	mtd_erase_callback(instr);
211 	return 0;
212 }
213 
214 static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
215 		       size_t *retlen, unsigned char *buf)
216 {
217 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
218 	struct spi_transfer transfer[2];
219 	struct spi_message message;
220 	unsigned char command[4];
221 	int ret;
222 
223 	spi_message_init(&message);
224 	memset(&transfer, 0, sizeof(transfer));
225 
226 	command[0] = SST25L_CMD_READ;
227 	command[1] = from >> 16;
228 	command[2] = from >> 8;
229 	command[3] = from;
230 
231 	transfer[0].tx_buf = command;
232 	transfer[0].len = sizeof(command);
233 	spi_message_add_tail(&transfer[0], &message);
234 
235 	transfer[1].rx_buf = buf;
236 	transfer[1].len = len;
237 	spi_message_add_tail(&transfer[1], &message);
238 
239 	mutex_lock(&flash->lock);
240 
241 	/* Wait for previous write/erase to complete */
242 	ret = sst25l_wait_till_ready(flash);
243 	if (ret) {
244 		mutex_unlock(&flash->lock);
245 		return ret;
246 	}
247 
248 	spi_sync(flash->spi, &message);
249 
250 	if (retlen && message.actual_length > sizeof(command))
251 		*retlen += message.actual_length - sizeof(command);
252 
253 	mutex_unlock(&flash->lock);
254 	return 0;
255 }
256 
257 static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
258 			size_t *retlen, const unsigned char *buf)
259 {
260 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
261 	int i, j, ret, bytes, copied = 0;
262 	unsigned char command[5];
263 
264 	if ((uint32_t)to % mtd->writesize)
265 		return -EINVAL;
266 
267 	mutex_lock(&flash->lock);
268 
269 	ret = sst25l_write_enable(flash, 1);
270 	if (ret)
271 		goto out;
272 
273 	for (i = 0; i < len; i += mtd->writesize) {
274 		ret = sst25l_wait_till_ready(flash);
275 		if (ret)
276 			goto out;
277 
278 		/* Write the first byte of the page */
279 		command[0] = SST25L_CMD_AAI_PROGRAM;
280 		command[1] = (to + i) >> 16;
281 		command[2] = (to + i) >> 8;
282 		command[3] = (to + i);
283 		command[4] = buf[i];
284 		ret = spi_write(flash->spi, command, 5);
285 		if (ret < 0)
286 			goto out;
287 		copied++;
288 
289 		/*
290 		 * Write the remaining bytes using auto address
291 		 * increment mode
292 		 */
293 		bytes = min_t(uint32_t, mtd->writesize, len - i);
294 		for (j = 1; j < bytes; j++, copied++) {
295 			ret = sst25l_wait_till_ready(flash);
296 			if (ret)
297 				goto out;
298 
299 			command[1] = buf[i + j];
300 			ret = spi_write(flash->spi, command, 2);
301 			if (ret)
302 				goto out;
303 		}
304 	}
305 
306 out:
307 	ret = sst25l_write_enable(flash, 0);
308 
309 	if (retlen)
310 		*retlen = copied;
311 
312 	mutex_unlock(&flash->lock);
313 	return ret;
314 }
315 
316 static struct flash_info *sst25l_match_device(struct spi_device *spi)
317 {
318 	struct flash_info *flash_info = NULL;
319 	struct spi_message m;
320 	struct spi_transfer t;
321 	unsigned char cmd_resp[6];
322 	int i, err;
323 	uint16_t id;
324 
325 	spi_message_init(&m);
326 	memset(&t, 0, sizeof(struct spi_transfer));
327 
328 	cmd_resp[0] = SST25L_CMD_READ_ID;
329 	cmd_resp[1] = 0;
330 	cmd_resp[2] = 0;
331 	cmd_resp[3] = 0;
332 	cmd_resp[4] = 0xff;
333 	cmd_resp[5] = 0xff;
334 	t.tx_buf = cmd_resp;
335 	t.rx_buf = cmd_resp;
336 	t.len = sizeof(cmd_resp);
337 	spi_message_add_tail(&t, &m);
338 	err = spi_sync(spi, &m);
339 	if (err < 0) {
340 		dev_err(&spi->dev, "error reading device id\n");
341 		return NULL;
342 	}
343 
344 	id = (cmd_resp[4] << 8) | cmd_resp[5];
345 
346 	for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
347 		if (sst25l_flash_info[i].device_id == id)
348 			flash_info = &sst25l_flash_info[i];
349 
350 	if (!flash_info)
351 		dev_err(&spi->dev, "unknown id %.4x\n", id);
352 
353 	return flash_info;
354 }
355 
356 static int sst25l_probe(struct spi_device *spi)
357 {
358 	struct flash_info *flash_info;
359 	struct sst25l_flash *flash;
360 	struct flash_platform_data *data;
361 	int ret;
362 
363 	flash_info = sst25l_match_device(spi);
364 	if (!flash_info)
365 		return -ENODEV;
366 
367 	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
368 	if (!flash)
369 		return -ENOMEM;
370 
371 	flash->spi = spi;
372 	mutex_init(&flash->lock);
373 	spi_set_drvdata(spi, flash);
374 
375 	data = dev_get_platdata(&spi->dev);
376 	if (data && data->name)
377 		flash->mtd.name = data->name;
378 	else
379 		flash->mtd.name = dev_name(&spi->dev);
380 
381 	flash->mtd.type		= MTD_NORFLASH;
382 	flash->mtd.flags	= MTD_CAP_NORFLASH;
383 	flash->mtd.erasesize	= flash_info->erase_size;
384 	flash->mtd.writesize	= flash_info->page_size;
385 	flash->mtd.writebufsize	= flash_info->page_size;
386 	flash->mtd.size		= flash_info->page_size * flash_info->nr_pages;
387 	flash->mtd._erase	= sst25l_erase;
388 	flash->mtd._read		= sst25l_read;
389 	flash->mtd._write 	= sst25l_write;
390 
391 	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
392 		 (long long)flash->mtd.size >> 10);
393 
394 	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
395 	      ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
396 	      flash->mtd.name,
397 	      (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
398 	      flash->mtd.erasesize, flash->mtd.erasesize / 1024,
399 	      flash->mtd.numeraseregions);
400 
401 
402 	ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
403 					data ? data->parts : NULL,
404 					data ? data->nr_parts : 0);
405 	if (ret)
406 		return -ENODEV;
407 
408 	return 0;
409 }
410 
411 static int sst25l_remove(struct spi_device *spi)
412 {
413 	struct sst25l_flash *flash = spi_get_drvdata(spi);
414 
415 	return mtd_device_unregister(&flash->mtd);
416 }
417 
418 static struct spi_driver sst25l_driver = {
419 	.driver = {
420 		.name	= "sst25l",
421 		.owner	= THIS_MODULE,
422 	},
423 	.probe		= sst25l_probe,
424 	.remove		= sst25l_remove,
425 };
426 
427 module_spi_driver(sst25l_driver);
428 
429 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
430 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
431 	      "Ryan Mallon");
432 MODULE_LICENSE("GPL");
433