xref: /linux/drivers/mtd/devices/sst25l.c (revision b68fc09be48edbc47de1a0f3d42ef8adf6c0ac55)
1 /*
2  * sst25l.c
3  *
4  * Driver for SST25L SPI Flash chips
5  *
6  * Copyright © 2009 Bluewater Systems Ltd
7  * Author: Andre Renaud <andre@bluewatersys.com>
8  * Author: Ryan Mallon
9  *
10  * Based on m25p80.c
11  *
12  * This code is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  *
16  */
17 
18 #include <linux/module.h>
19 #include <linux/device.h>
20 #include <linux/mutex.h>
21 #include <linux/interrupt.h>
22 #include <linux/slab.h>
23 #include <linux/sched.h>
24 
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 
28 #include <linux/spi/spi.h>
29 #include <linux/spi/flash.h>
30 
31 /* Erases can take up to 3 seconds! */
32 #define MAX_READY_WAIT_JIFFIES	msecs_to_jiffies(3000)
33 
34 #define SST25L_CMD_WRSR		0x01	/* Write status register */
35 #define SST25L_CMD_WRDI		0x04	/* Write disable */
36 #define SST25L_CMD_RDSR		0x05	/* Read status register */
37 #define SST25L_CMD_WREN		0x06	/* Write enable */
38 #define SST25L_CMD_READ		0x03	/* High speed read */
39 
40 #define SST25L_CMD_EWSR		0x50	/* Enable write status register */
41 #define SST25L_CMD_SECTOR_ERASE	0x20	/* Erase sector */
42 #define SST25L_CMD_READ_ID	0x90	/* Read device ID */
43 #define SST25L_CMD_AAI_PROGRAM	0xaf	/* Auto address increment */
44 
45 #define SST25L_STATUS_BUSY	(1 << 0)	/* Chip is busy */
46 #define SST25L_STATUS_WREN	(1 << 1)	/* Write enabled */
47 #define SST25L_STATUS_BP0	(1 << 2)	/* Block protection 0 */
48 #define SST25L_STATUS_BP1	(1 << 3)	/* Block protection 1 */
49 
50 struct sst25l_flash {
51 	struct spi_device	*spi;
52 	struct mutex		lock;
53 	struct mtd_info		mtd;
54 };
55 
56 struct flash_info {
57 	const char		*name;
58 	uint16_t		device_id;
59 	unsigned		page_size;
60 	unsigned		nr_pages;
61 	unsigned		erase_size;
62 };
63 
64 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
65 
66 static struct flash_info sst25l_flash_info[] = {
67 	{"sst25lf020a", 0xbf43, 256, 1024, 4096},
68 	{"sst25lf040a",	0xbf44,	256, 2048, 4096},
69 };
70 
71 static int sst25l_status(struct sst25l_flash *flash, int *status)
72 {
73 	struct spi_message m;
74 	struct spi_transfer t;
75 	unsigned char cmd_resp[2];
76 	int err;
77 
78 	spi_message_init(&m);
79 	memset(&t, 0, sizeof(struct spi_transfer));
80 
81 	cmd_resp[0] = SST25L_CMD_RDSR;
82 	cmd_resp[1] = 0xff;
83 	t.tx_buf = cmd_resp;
84 	t.rx_buf = cmd_resp;
85 	t.len = sizeof(cmd_resp);
86 	spi_message_add_tail(&t, &m);
87 	err = spi_sync(flash->spi, &m);
88 	if (err < 0)
89 		return err;
90 
91 	*status = cmd_resp[1];
92 	return 0;
93 }
94 
95 static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
96 {
97 	unsigned char command[2];
98 	int status, err;
99 
100 	command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
101 	err = spi_write(flash->spi, command, 1);
102 	if (err)
103 		return err;
104 
105 	command[0] = SST25L_CMD_EWSR;
106 	err = spi_write(flash->spi, command, 1);
107 	if (err)
108 		return err;
109 
110 	command[0] = SST25L_CMD_WRSR;
111 	command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
112 	err = spi_write(flash->spi, command, 2);
113 	if (err)
114 		return err;
115 
116 	if (enable) {
117 		err = sst25l_status(flash, &status);
118 		if (err)
119 			return err;
120 		if (!(status & SST25L_STATUS_WREN))
121 			return -EROFS;
122 	}
123 
124 	return 0;
125 }
126 
127 static int sst25l_wait_till_ready(struct sst25l_flash *flash)
128 {
129 	unsigned long deadline;
130 	int status, err;
131 
132 	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
133 	do {
134 		err = sst25l_status(flash, &status);
135 		if (err)
136 			return err;
137 		if (!(status & SST25L_STATUS_BUSY))
138 			return 0;
139 
140 		cond_resched();
141 	} while (!time_after_eq(jiffies, deadline));
142 
143 	return -ETIMEDOUT;
144 }
145 
146 static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
147 {
148 	unsigned char command[4];
149 	int err;
150 
151 	err = sst25l_write_enable(flash, 1);
152 	if (err)
153 		return err;
154 
155 	command[0] = SST25L_CMD_SECTOR_ERASE;
156 	command[1] = offset >> 16;
157 	command[2] = offset >> 8;
158 	command[3] = offset;
159 	err = spi_write(flash->spi, command, 4);
160 	if (err)
161 		return err;
162 
163 	err = sst25l_wait_till_ready(flash);
164 	if (err)
165 		return err;
166 
167 	return sst25l_write_enable(flash, 0);
168 }
169 
170 static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
171 {
172 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
173 	uint32_t addr, end;
174 	int err;
175 
176 	/* Sanity checks */
177 	if ((uint32_t)instr->len % mtd->erasesize)
178 		return -EINVAL;
179 
180 	if ((uint32_t)instr->addr % mtd->erasesize)
181 		return -EINVAL;
182 
183 	addr = instr->addr;
184 	end = addr + instr->len;
185 
186 	mutex_lock(&flash->lock);
187 
188 	err = sst25l_wait_till_ready(flash);
189 	if (err) {
190 		mutex_unlock(&flash->lock);
191 		return err;
192 	}
193 
194 	while (addr < end) {
195 		err = sst25l_erase_sector(flash, addr);
196 		if (err) {
197 			mutex_unlock(&flash->lock);
198 			dev_err(&flash->spi->dev, "Erase failed\n");
199 			return err;
200 		}
201 
202 		addr += mtd->erasesize;
203 	}
204 
205 	mutex_unlock(&flash->lock);
206 
207 	return 0;
208 }
209 
210 static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
211 		       size_t *retlen, unsigned char *buf)
212 {
213 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
214 	struct spi_transfer transfer[2];
215 	struct spi_message message;
216 	unsigned char command[4];
217 	int ret;
218 
219 	spi_message_init(&message);
220 	memset(&transfer, 0, sizeof(transfer));
221 
222 	command[0] = SST25L_CMD_READ;
223 	command[1] = from >> 16;
224 	command[2] = from >> 8;
225 	command[3] = from;
226 
227 	transfer[0].tx_buf = command;
228 	transfer[0].len = sizeof(command);
229 	spi_message_add_tail(&transfer[0], &message);
230 
231 	transfer[1].rx_buf = buf;
232 	transfer[1].len = len;
233 	spi_message_add_tail(&transfer[1], &message);
234 
235 	mutex_lock(&flash->lock);
236 
237 	/* Wait for previous write/erase to complete */
238 	ret = sst25l_wait_till_ready(flash);
239 	if (ret) {
240 		mutex_unlock(&flash->lock);
241 		return ret;
242 	}
243 
244 	spi_sync(flash->spi, &message);
245 
246 	if (retlen && message.actual_length > sizeof(command))
247 		*retlen += message.actual_length - sizeof(command);
248 
249 	mutex_unlock(&flash->lock);
250 	return 0;
251 }
252 
253 static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
254 			size_t *retlen, const unsigned char *buf)
255 {
256 	struct sst25l_flash *flash = to_sst25l_flash(mtd);
257 	int i, j, ret, bytes, copied = 0;
258 	unsigned char command[5];
259 
260 	if ((uint32_t)to % mtd->writesize)
261 		return -EINVAL;
262 
263 	mutex_lock(&flash->lock);
264 
265 	ret = sst25l_write_enable(flash, 1);
266 	if (ret)
267 		goto out;
268 
269 	for (i = 0; i < len; i += mtd->writesize) {
270 		ret = sst25l_wait_till_ready(flash);
271 		if (ret)
272 			goto out;
273 
274 		/* Write the first byte of the page */
275 		command[0] = SST25L_CMD_AAI_PROGRAM;
276 		command[1] = (to + i) >> 16;
277 		command[2] = (to + i) >> 8;
278 		command[3] = (to + i);
279 		command[4] = buf[i];
280 		ret = spi_write(flash->spi, command, 5);
281 		if (ret < 0)
282 			goto out;
283 		copied++;
284 
285 		/*
286 		 * Write the remaining bytes using auto address
287 		 * increment mode
288 		 */
289 		bytes = min_t(uint32_t, mtd->writesize, len - i);
290 		for (j = 1; j < bytes; j++, copied++) {
291 			ret = sst25l_wait_till_ready(flash);
292 			if (ret)
293 				goto out;
294 
295 			command[1] = buf[i + j];
296 			ret = spi_write(flash->spi, command, 2);
297 			if (ret)
298 				goto out;
299 		}
300 	}
301 
302 out:
303 	ret = sst25l_write_enable(flash, 0);
304 
305 	if (retlen)
306 		*retlen = copied;
307 
308 	mutex_unlock(&flash->lock);
309 	return ret;
310 }
311 
312 static struct flash_info *sst25l_match_device(struct spi_device *spi)
313 {
314 	struct flash_info *flash_info = NULL;
315 	struct spi_message m;
316 	struct spi_transfer t;
317 	unsigned char cmd_resp[6];
318 	int i, err;
319 	uint16_t id;
320 
321 	spi_message_init(&m);
322 	memset(&t, 0, sizeof(struct spi_transfer));
323 
324 	cmd_resp[0] = SST25L_CMD_READ_ID;
325 	cmd_resp[1] = 0;
326 	cmd_resp[2] = 0;
327 	cmd_resp[3] = 0;
328 	cmd_resp[4] = 0xff;
329 	cmd_resp[5] = 0xff;
330 	t.tx_buf = cmd_resp;
331 	t.rx_buf = cmd_resp;
332 	t.len = sizeof(cmd_resp);
333 	spi_message_add_tail(&t, &m);
334 	err = spi_sync(spi, &m);
335 	if (err < 0) {
336 		dev_err(&spi->dev, "error reading device id\n");
337 		return NULL;
338 	}
339 
340 	id = (cmd_resp[4] << 8) | cmd_resp[5];
341 
342 	for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
343 		if (sst25l_flash_info[i].device_id == id)
344 			flash_info = &sst25l_flash_info[i];
345 
346 	if (!flash_info)
347 		dev_err(&spi->dev, "unknown id %.4x\n", id);
348 
349 	return flash_info;
350 }
351 
352 static int sst25l_probe(struct spi_device *spi)
353 {
354 	struct flash_info *flash_info;
355 	struct sst25l_flash *flash;
356 	struct flash_platform_data *data;
357 	int ret;
358 
359 	flash_info = sst25l_match_device(spi);
360 	if (!flash_info)
361 		return -ENODEV;
362 
363 	flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
364 	if (!flash)
365 		return -ENOMEM;
366 
367 	flash->spi = spi;
368 	mutex_init(&flash->lock);
369 	spi_set_drvdata(spi, flash);
370 
371 	data = dev_get_platdata(&spi->dev);
372 	if (data && data->name)
373 		flash->mtd.name = data->name;
374 
375 	flash->mtd.dev.parent   = &spi->dev;
376 	flash->mtd.type		= MTD_NORFLASH;
377 	flash->mtd.flags	= MTD_CAP_NORFLASH;
378 	flash->mtd.erasesize	= flash_info->erase_size;
379 	flash->mtd.writesize	= flash_info->page_size;
380 	flash->mtd.writebufsize	= flash_info->page_size;
381 	flash->mtd.size		= flash_info->page_size * flash_info->nr_pages;
382 	flash->mtd._erase	= sst25l_erase;
383 	flash->mtd._read		= sst25l_read;
384 	flash->mtd._write 	= sst25l_write;
385 
386 	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
387 		 (long long)flash->mtd.size >> 10);
388 
389 	pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
390 	      ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
391 	      flash->mtd.name,
392 	      (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
393 	      flash->mtd.erasesize, flash->mtd.erasesize / 1024,
394 	      flash->mtd.numeraseregions);
395 
396 
397 	ret = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
398 				  data ? data->nr_parts : 0);
399 	if (ret)
400 		return -ENODEV;
401 
402 	return 0;
403 }
404 
405 static int sst25l_remove(struct spi_device *spi)
406 {
407 	struct sst25l_flash *flash = spi_get_drvdata(spi);
408 
409 	return mtd_device_unregister(&flash->mtd);
410 }
411 
412 static struct spi_driver sst25l_driver = {
413 	.driver = {
414 		.name	= "sst25l",
415 	},
416 	.probe		= sst25l_probe,
417 	.remove		= sst25l_remove,
418 };
419 
420 module_spi_driver(sst25l_driver);
421 
422 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
423 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
424 	      "Ryan Mallon");
425 MODULE_LICENSE("GPL");
426