xref: /linux/drivers/mtd/devices/docg3.h (revision a67ff6a54095e27093ea501fb143fefe51a536c2)
1 /*
2  * Handles the M-Systems DiskOnChip G3 chip
3  *
4  * Copyright (C) 2011 Robert Jarzmik
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
19  *
20  */
21 
22 #ifndef _MTD_DOCG3_H
23 #define _MTD_DOCG3_H
24 
25 /*
26  * Flash memory areas :
27  *   - 0x0000 .. 0x07ff : IPL
28  *   - 0x0800 .. 0x0fff : Data area
29  *   - 0x1000 .. 0x17ff : Registers
30  *   - 0x1800 .. 0x1fff : Unknown
31  */
32 #define DOC_IOSPACE_IPL			0x0000
33 #define DOC_IOSPACE_DATA		0x0800
34 #define DOC_IOSPACE_SIZE		0x2000
35 
36 /*
37  * DOC G3 layout and adressing scheme
38  *   A page address for the block "b", plane "P" and page "p":
39  *   address = [bbbb bPpp pppp]
40  */
41 
42 #define DOC_ADDR_PAGE_MASK		0x3f
43 #define DOC_ADDR_BLOCK_SHIFT		6
44 #define DOC_LAYOUT_NBPLANES		2
45 #define DOC_LAYOUT_PAGES_PER_BLOCK	64
46 #define DOC_LAYOUT_PAGE_SIZE		512
47 #define DOC_LAYOUT_OOB_SIZE		16
48 #define DOC_LAYOUT_WEAR_SIZE		8
49 #define DOC_LAYOUT_PAGE_OOB_SIZE				\
50 	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)
51 #define DOC_LAYOUT_WEAR_OFFSET		(DOC_LAYOUT_PAGE_OOB_SIZE * 2)
52 #define DOC_LAYOUT_BLOCK_SIZE					\
53 	(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
54 #define DOC_ECC_BCH_SIZE		7
55 #define DOC_ECC_BCH_COVERED_BYTES				\
56 	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ +	\
57 	 DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
58 
59 /*
60  * Blocks distribution
61  */
62 #define DOC_LAYOUT_BLOCK_BBT		0
63 #define DOC_LAYOUT_BLOCK_OTP		0
64 #define DOC_LAYOUT_BLOCK_FIRST_DATA	6
65 
66 #define DOC_LAYOUT_PAGE_BBT		4
67 
68 /*
69  * Extra page OOB (16 bytes wide) layout
70  */
71 #define DOC_LAYOUT_OOB_PAGEINFO_OFS	0
72 #define DOC_LAYOUT_OOB_HAMMING_OFS	7
73 #define DOC_LAYOUT_OOB_BCH_OFS		8
74 #define DOC_LAYOUT_OOB_UNUSED_OFS	15
75 #define DOC_LAYOUT_OOB_PAGEINFO_SZ	7
76 #define DOC_LAYOUT_OOB_HAMMING_SZ	1
77 #define DOC_LAYOUT_OOB_BCH_SZ		7
78 #define DOC_LAYOUT_OOB_UNUSED_SZ	1
79 
80 
81 #define DOC_CHIPID_G3			0x200
82 #define DOC_ERASE_MARK			0xaa
83 /*
84  * Flash registers
85  */
86 #define DOC_CHIPID			0x1000
87 #define DOC_TEST			0x1004
88 #define DOC_BUSLOCK			0x1006
89 #define DOC_ENDIANCONTROL		0x1008
90 #define DOC_DEVICESELECT		0x100a
91 #define DOC_ASICMODE			0x100c
92 #define DOC_CONFIGURATION		0x100e
93 #define DOC_INTERRUPTCONTROL		0x1010
94 #define DOC_READADDRESS			0x101a
95 #define DOC_DATAEND			0x101e
96 #define DOC_INTERRUPTSTATUS		0x1020
97 
98 #define DOC_FLASHSEQUENCE		0x1032
99 #define DOC_FLASHCOMMAND		0x1034
100 #define DOC_FLASHADDRESS		0x1036
101 #define DOC_FLASHCONTROL		0x1038
102 #define DOC_NOP				0x103e
103 
104 #define DOC_ECCCONF0			0x1040
105 #define DOC_ECCCONF1			0x1042
106 #define DOC_ECCPRESET			0x1044
107 #define DOC_HAMMINGPARITY		0x1046
108 #define DOC_BCH_SYNDROM(idx)		(0x1048 + (idx << 1))
109 
110 #define DOC_PROTECTION			0x1056
111 #define DOC_DPS0_ADDRLOW		0x1060
112 #define DOC_DPS0_ADDRHIGH		0x1062
113 #define DOC_DPS1_ADDRLOW		0x1064
114 #define DOC_DPS1_ADDRHIGH		0x1066
115 #define DOC_DPS0_STATUS			0x106c
116 #define DOC_DPS1_STATUS			0x106e
117 
118 #define DOC_ASICMODECONFIRM		0x1072
119 #define DOC_CHIPID_INV			0x1074
120 
121 /*
122  * Flash sequences
123  * A sequence is preset before one or more commands are input to the chip.
124  */
125 #define DOC_SEQ_RESET			0x00
126 #define DOC_SEQ_PAGE_SIZE_532		0x03
127 #define DOC_SEQ_SET_MODE		0x09
128 #define DOC_SEQ_READ			0x12
129 #define DOC_SEQ_SET_PLANE1		0x0e
130 #define DOC_SEQ_SET_PLANE2		0x10
131 #define DOC_SEQ_PAGE_SETUP		0x1d
132 
133 /*
134  * Flash commands
135  */
136 #define DOC_CMD_READ_PLANE1		0x00
137 #define DOC_CMD_SET_ADDR_READ		0x05
138 #define DOC_CMD_READ_ALL_PLANES		0x30
139 #define DOC_CMD_READ_PLANE2		0x50
140 #define DOC_CMD_READ_FLASH		0xe0
141 #define DOC_CMD_PAGE_SIZE_532		0x3c
142 
143 #define DOC_CMD_PROG_BLOCK_ADDR		0x60
144 #define DOC_CMD_PROG_CYCLE1		0x80
145 #define DOC_CMD_PROG_CYCLE2		0x10
146 #define DOC_CMD_ERASECYCLE2		0xd0
147 
148 #define DOC_CMD_RELIABLE_MODE		0x22
149 #define DOC_CMD_FAST_MODE		0xa2
150 
151 #define DOC_CMD_RESET			0xff
152 
153 /*
154  * Flash register : DOC_FLASHCONTROL
155  */
156 #define DOC_CTRL_VIOLATION		0x20
157 #define DOC_CTRL_CE			0x10
158 #define DOC_CTRL_UNKNOWN_BITS		0x08
159 #define DOC_CTRL_PROTECTION_ERROR	0x04
160 #define DOC_CTRL_SEQUENCE_ERROR		0x02
161 #define DOC_CTRL_FLASHREADY		0x01
162 
163 /*
164  * Flash register : DOC_ASICMODE
165  */
166 #define DOC_ASICMODE_RESET		0x00
167 #define DOC_ASICMODE_NORMAL		0x01
168 #define DOC_ASICMODE_POWERDOWN		0x02
169 #define DOC_ASICMODE_MDWREN		0x04
170 #define DOC_ASICMODE_BDETCT_RESET	0x08
171 #define DOC_ASICMODE_RSTIN_RESET	0x10
172 #define DOC_ASICMODE_RAM_WE		0x20
173 
174 /*
175  * Flash register : DOC_ECCCONF0
176  */
177 #define DOC_ECCCONF0_READ_MODE		0x8000
178 #define DOC_ECCCONF0_AUTO_ECC_ENABLE	0x4000
179 #define DOC_ECCCONF0_HAMMING_ENABLE	0x1000
180 #define DOC_ECCCONF0_BCH_ENABLE		0x0800
181 #define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
182 
183 /*
184  * Flash register : DOC_ECCCONF1
185  */
186 #define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
187 #define DOC_ECCCONF1_UNKOWN1		0x40
188 #define DOC_ECCCONF1_UNKOWN2		0x20
189 #define DOC_ECCCONF1_UNKOWN3		0x10
190 #define DOC_ECCCONF1_HAMMING_BITS_MASK	0x0f
191 
192 /*
193  * Flash register : DOC_PROTECTION
194  */
195 #define DOC_PROTECT_FOUNDRY_OTP_LOCK	0x01
196 #define DOC_PROTECT_CUSTOMER_OTP_LOCK	0x02
197 #define DOC_PROTECT_LOCK_INPUT		0x04
198 #define DOC_PROTECT_STICKY_LOCK		0x08
199 #define DOC_PROTECT_PROTECTION_ENABLED	0x10
200 #define DOC_PROTECT_IPL_DOWNLOAD_LOCK	0x20
201 #define DOC_PROTECT_PROTECTION_ERROR	0x80
202 
203 /*
204  * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS
205  */
206 #define DOC_DPS_OTP_PROTECTED		0x01
207 #define DOC_DPS_READ_PROTECTED		0x02
208 #define DOC_DPS_WRITE_PROTECTED		0x04
209 #define DOC_DPS_HW_LOCK_ENABLED		0x08
210 #define DOC_DPS_KEY_OK			0x80
211 
212 /*
213  * Flash register : DOC_CONFIGURATION
214  */
215 #define DOC_CONF_IF_CFG			0x80
216 #define DOC_CONF_MAX_ID_MASK		0x30
217 #define DOC_CONF_VCCQ_3V		0x01
218 
219 /*
220  * Flash register : DOC_READADDRESS
221  */
222 #define DOC_READADDR_INC		0x8000
223 #define DOC_READADDR_ONE_BYTE		0x4000
224 #define DOC_READADDR_ADDR_MASK		0x1fff
225 
226 /**
227  * struct docg3 - DiskOnChip driver private data
228  * @dev: the device currently under control
229  * @base: mapped IO space
230  * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
231  * @if_cfg: if true, reads are on 16bits, else reads are on 8bits
232  * @bbt: bad block table cache
233  * @debugfs_root: debugfs root node
234  */
235 struct docg3 {
236 	struct device *dev;
237 	void __iomem *base;
238 	unsigned int device_id:4;
239 	unsigned int if_cfg:1;
240 	int max_block;
241 	u8 *bbt;
242 	struct dentry *debugfs_root;
243 };
244 
245 #define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)
246 #define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)
247 #define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)
248 #define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)
249 
250 #define DEBUGFS_RO_ATTR(name, show_fct) \
251 	static int name##_open(struct inode *inode, struct file *file) \
252 	{ return single_open(file, show_fct, inode->i_private); }      \
253 	static const struct file_operations name##_fops = { \
254 		.owner = THIS_MODULE, \
255 		.open = name##_open, \
256 		.llseek = seq_lseek, \
257 		.read = seq_read, \
258 		.release = single_release \
259 	};
260 #endif
261 
262 /*
263  * Trace events part
264  */
265 #undef TRACE_SYSTEM
266 #define TRACE_SYSTEM docg3
267 
268 #if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
269 #define _MTD_DOCG3_TRACE
270 
271 #include <linux/tracepoint.h>
272 
273 TRACE_EVENT(docg3_io,
274 	    TP_PROTO(int op, int width, u16 reg, int val),
275 	    TP_ARGS(op, width, reg, val),
276 	    TP_STRUCT__entry(
277 		    __field(int, op)
278 		    __field(unsigned char, width)
279 		    __field(u16, reg)
280 		    __field(int, val)),
281 	    TP_fast_assign(
282 		    __entry->op = op;
283 		    __entry->width = width;
284 		    __entry->reg = reg;
285 		    __entry->val = val;),
286 	    TP_printk("docg3: %s%02d reg=%04x, val=%04x",
287 		      __entry->op ? "write" : "read", __entry->width,
288 		      __entry->reg, __entry->val)
289 	);
290 #endif
291 
292 /* This part must be outside protection */
293 #undef TRACE_INCLUDE_PATH
294 #undef TRACE_INCLUDE_FILE
295 #define TRACE_INCLUDE_PATH .
296 #define TRACE_INCLUDE_FILE docg3
297 #include <trace/define_trace.h>
298