1 /* 2 * linux/drivers/mmc/host/wbsd.c - Winbond W83L51xD SD/MMC driver 3 * 4 * Copyright (C) 2004-2007 Pierre Ossman, All Rights Reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or (at 9 * your option) any later version. 10 * 11 * 12 * Warning! 13 * 14 * Changes to the FIFO system should be done with extreme care since 15 * the hardware is full of bugs related to the FIFO. Known issues are: 16 * 17 * - FIFO size field in FSR is always zero. 18 * 19 * - FIFO interrupts tend not to work as they should. Interrupts are 20 * triggered only for full/empty events, not for threshold values. 21 * 22 * - On APIC systems the FIFO empty interrupt is sometimes lost. 23 */ 24 25 #include <linux/module.h> 26 #include <linux/moduleparam.h> 27 #include <linux/init.h> 28 #include <linux/ioport.h> 29 #include <linux/platform_device.h> 30 #include <linux/interrupt.h> 31 #include <linux/dma-mapping.h> 32 #include <linux/delay.h> 33 #include <linux/pnp.h> 34 #include <linux/highmem.h> 35 #include <linux/mmc/host.h> 36 #include <linux/scatterlist.h> 37 #include <linux/slab.h> 38 39 #include <asm/io.h> 40 #include <asm/dma.h> 41 42 #include "wbsd.h" 43 44 #define DRIVER_NAME "wbsd" 45 46 #define DBG(x...) \ 47 pr_debug(DRIVER_NAME ": " x) 48 #define DBGF(f, x...) \ 49 pr_debug(DRIVER_NAME " [%s()]: " f, __func__ , ##x) 50 51 /* 52 * Device resources 53 */ 54 55 #ifdef CONFIG_PNP 56 57 static const struct pnp_device_id pnp_dev_table[] = { 58 { "WEC0517", 0 }, 59 { "WEC0518", 0 }, 60 { "", 0 }, 61 }; 62 63 MODULE_DEVICE_TABLE(pnp, pnp_dev_table); 64 65 #endif /* CONFIG_PNP */ 66 67 static const int config_ports[] = { 0x2E, 0x4E }; 68 static const int unlock_codes[] = { 0x83, 0x87 }; 69 70 static const int valid_ids[] = { 71 0x7112, 72 }; 73 74 #ifdef CONFIG_PNP 75 static unsigned int param_nopnp = 0; 76 #else 77 static const unsigned int param_nopnp = 1; 78 #endif 79 static unsigned int param_io = 0x248; 80 static unsigned int param_irq = 6; 81 static int param_dma = 2; 82 83 /* 84 * Basic functions 85 */ 86 87 static inline void wbsd_unlock_config(struct wbsd_host *host) 88 { 89 BUG_ON(host->config == 0); 90 91 outb(host->unlock_code, host->config); 92 outb(host->unlock_code, host->config); 93 } 94 95 static inline void wbsd_lock_config(struct wbsd_host *host) 96 { 97 BUG_ON(host->config == 0); 98 99 outb(LOCK_CODE, host->config); 100 } 101 102 static inline void wbsd_write_config(struct wbsd_host *host, u8 reg, u8 value) 103 { 104 BUG_ON(host->config == 0); 105 106 outb(reg, host->config); 107 outb(value, host->config + 1); 108 } 109 110 static inline u8 wbsd_read_config(struct wbsd_host *host, u8 reg) 111 { 112 BUG_ON(host->config == 0); 113 114 outb(reg, host->config); 115 return inb(host->config + 1); 116 } 117 118 static inline void wbsd_write_index(struct wbsd_host *host, u8 index, u8 value) 119 { 120 outb(index, host->base + WBSD_IDXR); 121 outb(value, host->base + WBSD_DATAR); 122 } 123 124 static inline u8 wbsd_read_index(struct wbsd_host *host, u8 index) 125 { 126 outb(index, host->base + WBSD_IDXR); 127 return inb(host->base + WBSD_DATAR); 128 } 129 130 /* 131 * Common routines 132 */ 133 134 static void wbsd_init_device(struct wbsd_host *host) 135 { 136 u8 setup, ier; 137 138 /* 139 * Reset chip (SD/MMC part) and fifo. 140 */ 141 setup = wbsd_read_index(host, WBSD_IDX_SETUP); 142 setup |= WBSD_FIFO_RESET | WBSD_SOFT_RESET; 143 wbsd_write_index(host, WBSD_IDX_SETUP, setup); 144 145 /* 146 * Set DAT3 to input 147 */ 148 setup &= ~WBSD_DAT3_H; 149 wbsd_write_index(host, WBSD_IDX_SETUP, setup); 150 host->flags &= ~WBSD_FIGNORE_DETECT; 151 152 /* 153 * Read back default clock. 154 */ 155 host->clk = wbsd_read_index(host, WBSD_IDX_CLK); 156 157 /* 158 * Power down port. 159 */ 160 outb(WBSD_POWER_N, host->base + WBSD_CSR); 161 162 /* 163 * Set maximum timeout. 164 */ 165 wbsd_write_index(host, WBSD_IDX_TAAC, 0x7F); 166 167 /* 168 * Test for card presence 169 */ 170 if (inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT) 171 host->flags |= WBSD_FCARD_PRESENT; 172 else 173 host->flags &= ~WBSD_FCARD_PRESENT; 174 175 /* 176 * Enable interesting interrupts. 177 */ 178 ier = 0; 179 ier |= WBSD_EINT_CARD; 180 ier |= WBSD_EINT_FIFO_THRE; 181 ier |= WBSD_EINT_CRC; 182 ier |= WBSD_EINT_TIMEOUT; 183 ier |= WBSD_EINT_TC; 184 185 outb(ier, host->base + WBSD_EIR); 186 187 /* 188 * Clear interrupts. 189 */ 190 inb(host->base + WBSD_ISR); 191 } 192 193 static void wbsd_reset(struct wbsd_host *host) 194 { 195 u8 setup; 196 197 printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc)); 198 199 /* 200 * Soft reset of chip (SD/MMC part). 201 */ 202 setup = wbsd_read_index(host, WBSD_IDX_SETUP); 203 setup |= WBSD_SOFT_RESET; 204 wbsd_write_index(host, WBSD_IDX_SETUP, setup); 205 } 206 207 static void wbsd_request_end(struct wbsd_host *host, struct mmc_request *mrq) 208 { 209 unsigned long dmaflags; 210 211 if (host->dma >= 0) { 212 /* 213 * Release ISA DMA controller. 214 */ 215 dmaflags = claim_dma_lock(); 216 disable_dma(host->dma); 217 clear_dma_ff(host->dma); 218 release_dma_lock(dmaflags); 219 220 /* 221 * Disable DMA on host. 222 */ 223 wbsd_write_index(host, WBSD_IDX_DMA, 0); 224 } 225 226 host->mrq = NULL; 227 228 /* 229 * MMC layer might call back into the driver so first unlock. 230 */ 231 spin_unlock(&host->lock); 232 mmc_request_done(host->mmc, mrq); 233 spin_lock(&host->lock); 234 } 235 236 /* 237 * Scatter/gather functions 238 */ 239 240 static inline void wbsd_init_sg(struct wbsd_host *host, struct mmc_data *data) 241 { 242 /* 243 * Get info. about SG list from data structure. 244 */ 245 host->cur_sg = data->sg; 246 host->num_sg = data->sg_len; 247 248 host->offset = 0; 249 host->remain = host->cur_sg->length; 250 } 251 252 static inline int wbsd_next_sg(struct wbsd_host *host) 253 { 254 /* 255 * Skip to next SG entry. 256 */ 257 host->cur_sg++; 258 host->num_sg--; 259 260 /* 261 * Any entries left? 262 */ 263 if (host->num_sg > 0) { 264 host->offset = 0; 265 host->remain = host->cur_sg->length; 266 } 267 268 return host->num_sg; 269 } 270 271 static inline char *wbsd_sg_to_buffer(struct wbsd_host *host) 272 { 273 return sg_virt(host->cur_sg); 274 } 275 276 static inline void wbsd_sg_to_dma(struct wbsd_host *host, struct mmc_data *data) 277 { 278 unsigned int len, i; 279 struct scatterlist *sg; 280 char *dmabuf = host->dma_buffer; 281 char *sgbuf; 282 283 sg = data->sg; 284 len = data->sg_len; 285 286 for (i = 0; i < len; i++) { 287 sgbuf = sg_virt(&sg[i]); 288 memcpy(dmabuf, sgbuf, sg[i].length); 289 dmabuf += sg[i].length; 290 } 291 } 292 293 static inline void wbsd_dma_to_sg(struct wbsd_host *host, struct mmc_data *data) 294 { 295 unsigned int len, i; 296 struct scatterlist *sg; 297 char *dmabuf = host->dma_buffer; 298 char *sgbuf; 299 300 sg = data->sg; 301 len = data->sg_len; 302 303 for (i = 0; i < len; i++) { 304 sgbuf = sg_virt(&sg[i]); 305 memcpy(sgbuf, dmabuf, sg[i].length); 306 dmabuf += sg[i].length; 307 } 308 } 309 310 /* 311 * Command handling 312 */ 313 314 static inline void wbsd_get_short_reply(struct wbsd_host *host, 315 struct mmc_command *cmd) 316 { 317 /* 318 * Correct response type? 319 */ 320 if (wbsd_read_index(host, WBSD_IDX_RSPLEN) != WBSD_RSP_SHORT) { 321 cmd->error = -EILSEQ; 322 return; 323 } 324 325 cmd->resp[0] = wbsd_read_index(host, WBSD_IDX_RESP12) << 24; 326 cmd->resp[0] |= wbsd_read_index(host, WBSD_IDX_RESP13) << 16; 327 cmd->resp[0] |= wbsd_read_index(host, WBSD_IDX_RESP14) << 8; 328 cmd->resp[0] |= wbsd_read_index(host, WBSD_IDX_RESP15) << 0; 329 cmd->resp[1] = wbsd_read_index(host, WBSD_IDX_RESP16) << 24; 330 } 331 332 static inline void wbsd_get_long_reply(struct wbsd_host *host, 333 struct mmc_command *cmd) 334 { 335 int i; 336 337 /* 338 * Correct response type? 339 */ 340 if (wbsd_read_index(host, WBSD_IDX_RSPLEN) != WBSD_RSP_LONG) { 341 cmd->error = -EILSEQ; 342 return; 343 } 344 345 for (i = 0; i < 4; i++) { 346 cmd->resp[i] = 347 wbsd_read_index(host, WBSD_IDX_RESP1 + i * 4) << 24; 348 cmd->resp[i] |= 349 wbsd_read_index(host, WBSD_IDX_RESP2 + i * 4) << 16; 350 cmd->resp[i] |= 351 wbsd_read_index(host, WBSD_IDX_RESP3 + i * 4) << 8; 352 cmd->resp[i] |= 353 wbsd_read_index(host, WBSD_IDX_RESP4 + i * 4) << 0; 354 } 355 } 356 357 static void wbsd_send_command(struct wbsd_host *host, struct mmc_command *cmd) 358 { 359 int i; 360 u8 status, isr; 361 362 /* 363 * Clear accumulated ISR. The interrupt routine 364 * will fill this one with events that occur during 365 * transfer. 366 */ 367 host->isr = 0; 368 369 /* 370 * Send the command (CRC calculated by host). 371 */ 372 outb(cmd->opcode, host->base + WBSD_CMDR); 373 for (i = 3; i >= 0; i--) 374 outb((cmd->arg >> (i * 8)) & 0xff, host->base + WBSD_CMDR); 375 376 cmd->error = 0; 377 378 /* 379 * Wait for the request to complete. 380 */ 381 do { 382 status = wbsd_read_index(host, WBSD_IDX_STATUS); 383 } while (status & WBSD_CARDTRAFFIC); 384 385 /* 386 * Do we expect a reply? 387 */ 388 if (cmd->flags & MMC_RSP_PRESENT) { 389 /* 390 * Read back status. 391 */ 392 isr = host->isr; 393 394 /* Card removed? */ 395 if (isr & WBSD_INT_CARD) 396 cmd->error = -ENOMEDIUM; 397 /* Timeout? */ 398 else if (isr & WBSD_INT_TIMEOUT) 399 cmd->error = -ETIMEDOUT; 400 /* CRC? */ 401 else if ((cmd->flags & MMC_RSP_CRC) && (isr & WBSD_INT_CRC)) 402 cmd->error = -EILSEQ; 403 /* All ok */ 404 else { 405 if (cmd->flags & MMC_RSP_136) 406 wbsd_get_long_reply(host, cmd); 407 else 408 wbsd_get_short_reply(host, cmd); 409 } 410 } 411 } 412 413 /* 414 * Data functions 415 */ 416 417 static void wbsd_empty_fifo(struct wbsd_host *host) 418 { 419 struct mmc_data *data = host->mrq->cmd->data; 420 char *buffer; 421 int i, fsr, fifo; 422 423 /* 424 * Handle excessive data. 425 */ 426 if (host->num_sg == 0) 427 return; 428 429 buffer = wbsd_sg_to_buffer(host) + host->offset; 430 431 /* 432 * Drain the fifo. This has a tendency to loop longer 433 * than the FIFO length (usually one block). 434 */ 435 while (!((fsr = inb(host->base + WBSD_FSR)) & WBSD_FIFO_EMPTY)) { 436 /* 437 * The size field in the FSR is broken so we have to 438 * do some guessing. 439 */ 440 if (fsr & WBSD_FIFO_FULL) 441 fifo = 16; 442 else if (fsr & WBSD_FIFO_FUTHRE) 443 fifo = 8; 444 else 445 fifo = 1; 446 447 for (i = 0; i < fifo; i++) { 448 *buffer = inb(host->base + WBSD_DFR); 449 buffer++; 450 host->offset++; 451 host->remain--; 452 453 data->bytes_xfered++; 454 455 /* 456 * End of scatter list entry? 457 */ 458 if (host->remain == 0) { 459 /* 460 * Get next entry. Check if last. 461 */ 462 if (!wbsd_next_sg(host)) 463 return; 464 465 buffer = wbsd_sg_to_buffer(host); 466 } 467 } 468 } 469 470 /* 471 * This is a very dirty hack to solve a 472 * hardware problem. The chip doesn't trigger 473 * FIFO threshold interrupts properly. 474 */ 475 if ((data->blocks * data->blksz - data->bytes_xfered) < 16) 476 tasklet_schedule(&host->fifo_tasklet); 477 } 478 479 static void wbsd_fill_fifo(struct wbsd_host *host) 480 { 481 struct mmc_data *data = host->mrq->cmd->data; 482 char *buffer; 483 int i, fsr, fifo; 484 485 /* 486 * Check that we aren't being called after the 487 * entire buffer has been transfered. 488 */ 489 if (host->num_sg == 0) 490 return; 491 492 buffer = wbsd_sg_to_buffer(host) + host->offset; 493 494 /* 495 * Fill the fifo. This has a tendency to loop longer 496 * than the FIFO length (usually one block). 497 */ 498 while (!((fsr = inb(host->base + WBSD_FSR)) & WBSD_FIFO_FULL)) { 499 /* 500 * The size field in the FSR is broken so we have to 501 * do some guessing. 502 */ 503 if (fsr & WBSD_FIFO_EMPTY) 504 fifo = 0; 505 else if (fsr & WBSD_FIFO_EMTHRE) 506 fifo = 8; 507 else 508 fifo = 15; 509 510 for (i = 16; i > fifo; i--) { 511 outb(*buffer, host->base + WBSD_DFR); 512 buffer++; 513 host->offset++; 514 host->remain--; 515 516 data->bytes_xfered++; 517 518 /* 519 * End of scatter list entry? 520 */ 521 if (host->remain == 0) { 522 /* 523 * Get next entry. Check if last. 524 */ 525 if (!wbsd_next_sg(host)) 526 return; 527 528 buffer = wbsd_sg_to_buffer(host); 529 } 530 } 531 } 532 533 /* 534 * The controller stops sending interrupts for 535 * 'FIFO empty' under certain conditions. So we 536 * need to be a bit more pro-active. 537 */ 538 tasklet_schedule(&host->fifo_tasklet); 539 } 540 541 static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data) 542 { 543 u16 blksize; 544 u8 setup; 545 unsigned long dmaflags; 546 unsigned int size; 547 548 /* 549 * Calculate size. 550 */ 551 size = data->blocks * data->blksz; 552 553 /* 554 * Check timeout values for overflow. 555 * (Yes, some cards cause this value to overflow). 556 */ 557 if (data->timeout_ns > 127000000) 558 wbsd_write_index(host, WBSD_IDX_TAAC, 127); 559 else { 560 wbsd_write_index(host, WBSD_IDX_TAAC, 561 data->timeout_ns / 1000000); 562 } 563 564 if (data->timeout_clks > 255) 565 wbsd_write_index(host, WBSD_IDX_NSAC, 255); 566 else 567 wbsd_write_index(host, WBSD_IDX_NSAC, data->timeout_clks); 568 569 /* 570 * Inform the chip of how large blocks will be 571 * sent. It needs this to determine when to 572 * calculate CRC. 573 * 574 * Space for CRC must be included in the size. 575 * Two bytes are needed for each data line. 576 */ 577 if (host->bus_width == MMC_BUS_WIDTH_1) { 578 blksize = data->blksz + 2; 579 580 wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0); 581 wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF); 582 } else if (host->bus_width == MMC_BUS_WIDTH_4) { 583 blksize = data->blksz + 2 * 4; 584 585 wbsd_write_index(host, WBSD_IDX_PBSMSB, 586 ((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH); 587 wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF); 588 } else { 589 data->error = -EINVAL; 590 return; 591 } 592 593 /* 594 * Clear the FIFO. This is needed even for DMA 595 * transfers since the chip still uses the FIFO 596 * internally. 597 */ 598 setup = wbsd_read_index(host, WBSD_IDX_SETUP); 599 setup |= WBSD_FIFO_RESET; 600 wbsd_write_index(host, WBSD_IDX_SETUP, setup); 601 602 /* 603 * DMA transfer? 604 */ 605 if (host->dma >= 0) { 606 /* 607 * The buffer for DMA is only 64 kB. 608 */ 609 BUG_ON(size > 0x10000); 610 if (size > 0x10000) { 611 data->error = -EINVAL; 612 return; 613 } 614 615 /* 616 * Transfer data from the SG list to 617 * the DMA buffer. 618 */ 619 if (data->flags & MMC_DATA_WRITE) 620 wbsd_sg_to_dma(host, data); 621 622 /* 623 * Initialise the ISA DMA controller. 624 */ 625 dmaflags = claim_dma_lock(); 626 disable_dma(host->dma); 627 clear_dma_ff(host->dma); 628 if (data->flags & MMC_DATA_READ) 629 set_dma_mode(host->dma, DMA_MODE_READ & ~0x40); 630 else 631 set_dma_mode(host->dma, DMA_MODE_WRITE & ~0x40); 632 set_dma_addr(host->dma, host->dma_addr); 633 set_dma_count(host->dma, size); 634 635 enable_dma(host->dma); 636 release_dma_lock(dmaflags); 637 638 /* 639 * Enable DMA on the host. 640 */ 641 wbsd_write_index(host, WBSD_IDX_DMA, WBSD_DMA_ENABLE); 642 } else { 643 /* 644 * This flag is used to keep printk 645 * output to a minimum. 646 */ 647 host->firsterr = 1; 648 649 /* 650 * Initialise the SG list. 651 */ 652 wbsd_init_sg(host, data); 653 654 /* 655 * Turn off DMA. 656 */ 657 wbsd_write_index(host, WBSD_IDX_DMA, 0); 658 659 /* 660 * Set up FIFO threshold levels (and fill 661 * buffer if doing a write). 662 */ 663 if (data->flags & MMC_DATA_READ) { 664 wbsd_write_index(host, WBSD_IDX_FIFOEN, 665 WBSD_FIFOEN_FULL | 8); 666 } else { 667 wbsd_write_index(host, WBSD_IDX_FIFOEN, 668 WBSD_FIFOEN_EMPTY | 8); 669 wbsd_fill_fifo(host); 670 } 671 } 672 673 data->error = 0; 674 } 675 676 static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data) 677 { 678 unsigned long dmaflags; 679 int count; 680 u8 status; 681 682 WARN_ON(host->mrq == NULL); 683 684 /* 685 * Send a stop command if needed. 686 */ 687 if (data->stop) 688 wbsd_send_command(host, data->stop); 689 690 /* 691 * Wait for the controller to leave data 692 * transfer state. 693 */ 694 do { 695 status = wbsd_read_index(host, WBSD_IDX_STATUS); 696 } while (status & (WBSD_BLOCK_READ | WBSD_BLOCK_WRITE)); 697 698 /* 699 * DMA transfer? 700 */ 701 if (host->dma >= 0) { 702 /* 703 * Disable DMA on the host. 704 */ 705 wbsd_write_index(host, WBSD_IDX_DMA, 0); 706 707 /* 708 * Turn of ISA DMA controller. 709 */ 710 dmaflags = claim_dma_lock(); 711 disable_dma(host->dma); 712 clear_dma_ff(host->dma); 713 count = get_dma_residue(host->dma); 714 release_dma_lock(dmaflags); 715 716 data->bytes_xfered = host->mrq->data->blocks * 717 host->mrq->data->blksz - count; 718 data->bytes_xfered -= data->bytes_xfered % data->blksz; 719 720 /* 721 * Any leftover data? 722 */ 723 if (count) { 724 printk(KERN_ERR "%s: Incomplete DMA transfer. " 725 "%d bytes left.\n", 726 mmc_hostname(host->mmc), count); 727 728 if (!data->error) 729 data->error = -EIO; 730 } else { 731 /* 732 * Transfer data from DMA buffer to 733 * SG list. 734 */ 735 if (data->flags & MMC_DATA_READ) 736 wbsd_dma_to_sg(host, data); 737 } 738 739 if (data->error) { 740 if (data->bytes_xfered) 741 data->bytes_xfered -= data->blksz; 742 } 743 } 744 745 wbsd_request_end(host, host->mrq); 746 } 747 748 /*****************************************************************************\ 749 * * 750 * MMC layer callbacks * 751 * * 752 \*****************************************************************************/ 753 754 static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) 755 { 756 struct wbsd_host *host = mmc_priv(mmc); 757 struct mmc_command *cmd; 758 759 /* 760 * Disable tasklets to avoid a deadlock. 761 */ 762 spin_lock_bh(&host->lock); 763 764 BUG_ON(host->mrq != NULL); 765 766 cmd = mrq->cmd; 767 768 host->mrq = mrq; 769 770 /* 771 * Check that there is actually a card in the slot. 772 */ 773 if (!(host->flags & WBSD_FCARD_PRESENT)) { 774 cmd->error = -ENOMEDIUM; 775 goto done; 776 } 777 778 if (cmd->data) { 779 /* 780 * The hardware is so delightfully stupid that it has a list 781 * of "data" commands. If a command isn't on this list, it'll 782 * just go back to the idle state and won't send any data 783 * interrupts. 784 */ 785 switch (cmd->opcode) { 786 case 11: 787 case 17: 788 case 18: 789 case 20: 790 case 24: 791 case 25: 792 case 26: 793 case 27: 794 case 30: 795 case 42: 796 case 56: 797 break; 798 799 /* ACMDs. We don't keep track of state, so we just treat them 800 * like any other command. */ 801 case 51: 802 break; 803 804 default: 805 #ifdef CONFIG_MMC_DEBUG 806 printk(KERN_WARNING "%s: Data command %d is not " 807 "supported by this controller.\n", 808 mmc_hostname(host->mmc), cmd->opcode); 809 #endif 810 cmd->error = -EINVAL; 811 812 goto done; 813 }; 814 } 815 816 /* 817 * Does the request include data? 818 */ 819 if (cmd->data) { 820 wbsd_prepare_data(host, cmd->data); 821 822 if (cmd->data->error) 823 goto done; 824 } 825 826 wbsd_send_command(host, cmd); 827 828 /* 829 * If this is a data transfer the request 830 * will be finished after the data has 831 * transfered. 832 */ 833 if (cmd->data && !cmd->error) { 834 /* 835 * Dirty fix for hardware bug. 836 */ 837 if (host->dma == -1) 838 tasklet_schedule(&host->fifo_tasklet); 839 840 spin_unlock_bh(&host->lock); 841 842 return; 843 } 844 845 done: 846 wbsd_request_end(host, mrq); 847 848 spin_unlock_bh(&host->lock); 849 } 850 851 static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 852 { 853 struct wbsd_host *host = mmc_priv(mmc); 854 u8 clk, setup, pwr; 855 856 spin_lock_bh(&host->lock); 857 858 /* 859 * Reset the chip on each power off. 860 * Should clear out any weird states. 861 */ 862 if (ios->power_mode == MMC_POWER_OFF) 863 wbsd_init_device(host); 864 865 if (ios->clock >= 24000000) 866 clk = WBSD_CLK_24M; 867 else if (ios->clock >= 16000000) 868 clk = WBSD_CLK_16M; 869 else if (ios->clock >= 12000000) 870 clk = WBSD_CLK_12M; 871 else 872 clk = WBSD_CLK_375K; 873 874 /* 875 * Only write to the clock register when 876 * there is an actual change. 877 */ 878 if (clk != host->clk) { 879 wbsd_write_index(host, WBSD_IDX_CLK, clk); 880 host->clk = clk; 881 } 882 883 /* 884 * Power up card. 885 */ 886 if (ios->power_mode != MMC_POWER_OFF) { 887 pwr = inb(host->base + WBSD_CSR); 888 pwr &= ~WBSD_POWER_N; 889 outb(pwr, host->base + WBSD_CSR); 890 } 891 892 /* 893 * MMC cards need to have pin 1 high during init. 894 * It wreaks havoc with the card detection though so 895 * that needs to be disabled. 896 */ 897 setup = wbsd_read_index(host, WBSD_IDX_SETUP); 898 if (ios->chip_select == MMC_CS_HIGH) { 899 BUG_ON(ios->bus_width != MMC_BUS_WIDTH_1); 900 setup |= WBSD_DAT3_H; 901 host->flags |= WBSD_FIGNORE_DETECT; 902 } else { 903 if (setup & WBSD_DAT3_H) { 904 setup &= ~WBSD_DAT3_H; 905 906 /* 907 * We cannot resume card detection immediatly 908 * because of capacitance and delays in the chip. 909 */ 910 mod_timer(&host->ignore_timer, jiffies + HZ / 100); 911 } 912 } 913 wbsd_write_index(host, WBSD_IDX_SETUP, setup); 914 915 /* 916 * Store bus width for later. Will be used when 917 * setting up the data transfer. 918 */ 919 host->bus_width = ios->bus_width; 920 921 spin_unlock_bh(&host->lock); 922 } 923 924 static int wbsd_get_ro(struct mmc_host *mmc) 925 { 926 struct wbsd_host *host = mmc_priv(mmc); 927 u8 csr; 928 929 spin_lock_bh(&host->lock); 930 931 csr = inb(host->base + WBSD_CSR); 932 csr |= WBSD_MSLED; 933 outb(csr, host->base + WBSD_CSR); 934 935 mdelay(1); 936 937 csr = inb(host->base + WBSD_CSR); 938 csr &= ~WBSD_MSLED; 939 outb(csr, host->base + WBSD_CSR); 940 941 spin_unlock_bh(&host->lock); 942 943 return !!(csr & WBSD_WRPT); 944 } 945 946 static const struct mmc_host_ops wbsd_ops = { 947 .request = wbsd_request, 948 .set_ios = wbsd_set_ios, 949 .get_ro = wbsd_get_ro, 950 }; 951 952 /*****************************************************************************\ 953 * * 954 * Interrupt handling * 955 * * 956 \*****************************************************************************/ 957 958 /* 959 * Helper function to reset detection ignore 960 */ 961 962 static void wbsd_reset_ignore(unsigned long data) 963 { 964 struct wbsd_host *host = (struct wbsd_host *)data; 965 966 BUG_ON(host == NULL); 967 968 DBG("Resetting card detection ignore\n"); 969 970 spin_lock_bh(&host->lock); 971 972 host->flags &= ~WBSD_FIGNORE_DETECT; 973 974 /* 975 * Card status might have changed during the 976 * blackout. 977 */ 978 tasklet_schedule(&host->card_tasklet); 979 980 spin_unlock_bh(&host->lock); 981 } 982 983 /* 984 * Tasklets 985 */ 986 987 static inline struct mmc_data *wbsd_get_data(struct wbsd_host *host) 988 { 989 WARN_ON(!host->mrq); 990 if (!host->mrq) 991 return NULL; 992 993 WARN_ON(!host->mrq->cmd); 994 if (!host->mrq->cmd) 995 return NULL; 996 997 WARN_ON(!host->mrq->cmd->data); 998 if (!host->mrq->cmd->data) 999 return NULL; 1000 1001 return host->mrq->cmd->data; 1002 } 1003 1004 static void wbsd_tasklet_card(unsigned long param) 1005 { 1006 struct wbsd_host *host = (struct wbsd_host *)param; 1007 u8 csr; 1008 int delay = -1; 1009 1010 spin_lock(&host->lock); 1011 1012 if (host->flags & WBSD_FIGNORE_DETECT) { 1013 spin_unlock(&host->lock); 1014 return; 1015 } 1016 1017 csr = inb(host->base + WBSD_CSR); 1018 WARN_ON(csr == 0xff); 1019 1020 if (csr & WBSD_CARDPRESENT) { 1021 if (!(host->flags & WBSD_FCARD_PRESENT)) { 1022 DBG("Card inserted\n"); 1023 host->flags |= WBSD_FCARD_PRESENT; 1024 1025 delay = 500; 1026 } 1027 } else if (host->flags & WBSD_FCARD_PRESENT) { 1028 DBG("Card removed\n"); 1029 host->flags &= ~WBSD_FCARD_PRESENT; 1030 1031 if (host->mrq) { 1032 printk(KERN_ERR "%s: Card removed during transfer!\n", 1033 mmc_hostname(host->mmc)); 1034 wbsd_reset(host); 1035 1036 host->mrq->cmd->error = -ENOMEDIUM; 1037 tasklet_schedule(&host->finish_tasklet); 1038 } 1039 1040 delay = 0; 1041 } 1042 1043 /* 1044 * Unlock first since we might get a call back. 1045 */ 1046 1047 spin_unlock(&host->lock); 1048 1049 if (delay != -1) 1050 mmc_detect_change(host->mmc, msecs_to_jiffies(delay)); 1051 } 1052 1053 static void wbsd_tasklet_fifo(unsigned long param) 1054 { 1055 struct wbsd_host *host = (struct wbsd_host *)param; 1056 struct mmc_data *data; 1057 1058 spin_lock(&host->lock); 1059 1060 if (!host->mrq) 1061 goto end; 1062 1063 data = wbsd_get_data(host); 1064 if (!data) 1065 goto end; 1066 1067 if (data->flags & MMC_DATA_WRITE) 1068 wbsd_fill_fifo(host); 1069 else 1070 wbsd_empty_fifo(host); 1071 1072 /* 1073 * Done? 1074 */ 1075 if (host->num_sg == 0) { 1076 wbsd_write_index(host, WBSD_IDX_FIFOEN, 0); 1077 tasklet_schedule(&host->finish_tasklet); 1078 } 1079 1080 end: 1081 spin_unlock(&host->lock); 1082 } 1083 1084 static void wbsd_tasklet_crc(unsigned long param) 1085 { 1086 struct wbsd_host *host = (struct wbsd_host *)param; 1087 struct mmc_data *data; 1088 1089 spin_lock(&host->lock); 1090 1091 if (!host->mrq) 1092 goto end; 1093 1094 data = wbsd_get_data(host); 1095 if (!data) 1096 goto end; 1097 1098 DBGF("CRC error\n"); 1099 1100 data->error = -EILSEQ; 1101 1102 tasklet_schedule(&host->finish_tasklet); 1103 1104 end: 1105 spin_unlock(&host->lock); 1106 } 1107 1108 static void wbsd_tasklet_timeout(unsigned long param) 1109 { 1110 struct wbsd_host *host = (struct wbsd_host *)param; 1111 struct mmc_data *data; 1112 1113 spin_lock(&host->lock); 1114 1115 if (!host->mrq) 1116 goto end; 1117 1118 data = wbsd_get_data(host); 1119 if (!data) 1120 goto end; 1121 1122 DBGF("Timeout\n"); 1123 1124 data->error = -ETIMEDOUT; 1125 1126 tasklet_schedule(&host->finish_tasklet); 1127 1128 end: 1129 spin_unlock(&host->lock); 1130 } 1131 1132 static void wbsd_tasklet_finish(unsigned long param) 1133 { 1134 struct wbsd_host *host = (struct wbsd_host *)param; 1135 struct mmc_data *data; 1136 1137 spin_lock(&host->lock); 1138 1139 WARN_ON(!host->mrq); 1140 if (!host->mrq) 1141 goto end; 1142 1143 data = wbsd_get_data(host); 1144 if (!data) 1145 goto end; 1146 1147 wbsd_finish_data(host, data); 1148 1149 end: 1150 spin_unlock(&host->lock); 1151 } 1152 1153 /* 1154 * Interrupt handling 1155 */ 1156 1157 static irqreturn_t wbsd_irq(int irq, void *dev_id) 1158 { 1159 struct wbsd_host *host = dev_id; 1160 int isr; 1161 1162 isr = inb(host->base + WBSD_ISR); 1163 1164 /* 1165 * Was it actually our hardware that caused the interrupt? 1166 */ 1167 if (isr == 0xff || isr == 0x00) 1168 return IRQ_NONE; 1169 1170 host->isr |= isr; 1171 1172 /* 1173 * Schedule tasklets as needed. 1174 */ 1175 if (isr & WBSD_INT_CARD) 1176 tasklet_schedule(&host->card_tasklet); 1177 if (isr & WBSD_INT_FIFO_THRE) 1178 tasklet_schedule(&host->fifo_tasklet); 1179 if (isr & WBSD_INT_CRC) 1180 tasklet_hi_schedule(&host->crc_tasklet); 1181 if (isr & WBSD_INT_TIMEOUT) 1182 tasklet_hi_schedule(&host->timeout_tasklet); 1183 if (isr & WBSD_INT_TC) 1184 tasklet_schedule(&host->finish_tasklet); 1185 1186 return IRQ_HANDLED; 1187 } 1188 1189 /*****************************************************************************\ 1190 * * 1191 * Device initialisation and shutdown * 1192 * * 1193 \*****************************************************************************/ 1194 1195 /* 1196 * Allocate/free MMC structure. 1197 */ 1198 1199 static int __devinit wbsd_alloc_mmc(struct device *dev) 1200 { 1201 struct mmc_host *mmc; 1202 struct wbsd_host *host; 1203 1204 /* 1205 * Allocate MMC structure. 1206 */ 1207 mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev); 1208 if (!mmc) 1209 return -ENOMEM; 1210 1211 host = mmc_priv(mmc); 1212 host->mmc = mmc; 1213 1214 host->dma = -1; 1215 1216 /* 1217 * Set host parameters. 1218 */ 1219 mmc->ops = &wbsd_ops; 1220 mmc->f_min = 375000; 1221 mmc->f_max = 24000000; 1222 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; 1223 mmc->caps = MMC_CAP_4_BIT_DATA; 1224 1225 spin_lock_init(&host->lock); 1226 1227 /* 1228 * Set up timers 1229 */ 1230 init_timer(&host->ignore_timer); 1231 host->ignore_timer.data = (unsigned long)host; 1232 host->ignore_timer.function = wbsd_reset_ignore; 1233 1234 /* 1235 * Maximum number of segments. Worst case is one sector per segment 1236 * so this will be 64kB/512. 1237 */ 1238 mmc->max_hw_segs = 128; 1239 mmc->max_phys_segs = 128; 1240 1241 /* 1242 * Maximum request size. Also limited by 64KiB buffer. 1243 */ 1244 mmc->max_req_size = 65536; 1245 1246 /* 1247 * Maximum segment size. Could be one segment with the maximum number 1248 * of bytes. 1249 */ 1250 mmc->max_seg_size = mmc->max_req_size; 1251 1252 /* 1253 * Maximum block size. We have 12 bits (= 4095) but have to subtract 1254 * space for CRC. So the maximum is 4095 - 4*2 = 4087. 1255 */ 1256 mmc->max_blk_size = 4087; 1257 1258 /* 1259 * Maximum block count. There is no real limit so the maximum 1260 * request size will be the only restriction. 1261 */ 1262 mmc->max_blk_count = mmc->max_req_size; 1263 1264 dev_set_drvdata(dev, mmc); 1265 1266 return 0; 1267 } 1268 1269 static void wbsd_free_mmc(struct device *dev) 1270 { 1271 struct mmc_host *mmc; 1272 struct wbsd_host *host; 1273 1274 mmc = dev_get_drvdata(dev); 1275 if (!mmc) 1276 return; 1277 1278 host = mmc_priv(mmc); 1279 BUG_ON(host == NULL); 1280 1281 del_timer_sync(&host->ignore_timer); 1282 1283 mmc_free_host(mmc); 1284 1285 dev_set_drvdata(dev, NULL); 1286 } 1287 1288 /* 1289 * Scan for known chip id:s 1290 */ 1291 1292 static int __devinit wbsd_scan(struct wbsd_host *host) 1293 { 1294 int i, j, k; 1295 int id; 1296 1297 /* 1298 * Iterate through all ports, all codes to 1299 * find hardware that is in our known list. 1300 */ 1301 for (i = 0; i < ARRAY_SIZE(config_ports); i++) { 1302 if (!request_region(config_ports[i], 2, DRIVER_NAME)) 1303 continue; 1304 1305 for (j = 0; j < ARRAY_SIZE(unlock_codes); j++) { 1306 id = 0xFFFF; 1307 1308 host->config = config_ports[i]; 1309 host->unlock_code = unlock_codes[j]; 1310 1311 wbsd_unlock_config(host); 1312 1313 outb(WBSD_CONF_ID_HI, config_ports[i]); 1314 id = inb(config_ports[i] + 1) << 8; 1315 1316 outb(WBSD_CONF_ID_LO, config_ports[i]); 1317 id |= inb(config_ports[i] + 1); 1318 1319 wbsd_lock_config(host); 1320 1321 for (k = 0; k < ARRAY_SIZE(valid_ids); k++) { 1322 if (id == valid_ids[k]) { 1323 host->chip_id = id; 1324 1325 return 0; 1326 } 1327 } 1328 1329 if (id != 0xFFFF) { 1330 DBG("Unknown hardware (id %x) found at %x\n", 1331 id, config_ports[i]); 1332 } 1333 } 1334 1335 release_region(config_ports[i], 2); 1336 } 1337 1338 host->config = 0; 1339 host->unlock_code = 0; 1340 1341 return -ENODEV; 1342 } 1343 1344 /* 1345 * Allocate/free io port ranges 1346 */ 1347 1348 static int __devinit wbsd_request_region(struct wbsd_host *host, int base) 1349 { 1350 if (base & 0x7) 1351 return -EINVAL; 1352 1353 if (!request_region(base, 8, DRIVER_NAME)) 1354 return -EIO; 1355 1356 host->base = base; 1357 1358 return 0; 1359 } 1360 1361 static void wbsd_release_regions(struct wbsd_host *host) 1362 { 1363 if (host->base) 1364 release_region(host->base, 8); 1365 1366 host->base = 0; 1367 1368 if (host->config) 1369 release_region(host->config, 2); 1370 1371 host->config = 0; 1372 } 1373 1374 /* 1375 * Allocate/free DMA port and buffer 1376 */ 1377 1378 static void __devinit wbsd_request_dma(struct wbsd_host *host, int dma) 1379 { 1380 if (dma < 0) 1381 return; 1382 1383 if (request_dma(dma, DRIVER_NAME)) 1384 goto err; 1385 1386 /* 1387 * We need to allocate a special buffer in 1388 * order for ISA to be able to DMA to it. 1389 */ 1390 host->dma_buffer = kmalloc(WBSD_DMA_SIZE, 1391 GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN); 1392 if (!host->dma_buffer) 1393 goto free; 1394 1395 /* 1396 * Translate the address to a physical address. 1397 */ 1398 host->dma_addr = dma_map_single(mmc_dev(host->mmc), host->dma_buffer, 1399 WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); 1400 1401 /* 1402 * ISA DMA must be aligned on a 64k basis. 1403 */ 1404 if ((host->dma_addr & 0xffff) != 0) 1405 goto kfree; 1406 /* 1407 * ISA cannot access memory above 16 MB. 1408 */ 1409 else if (host->dma_addr >= 0x1000000) 1410 goto kfree; 1411 1412 host->dma = dma; 1413 1414 return; 1415 1416 kfree: 1417 /* 1418 * If we've gotten here then there is some kind of alignment bug 1419 */ 1420 BUG_ON(1); 1421 1422 dma_unmap_single(mmc_dev(host->mmc), host->dma_addr, 1423 WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); 1424 host->dma_addr = 0; 1425 1426 kfree(host->dma_buffer); 1427 host->dma_buffer = NULL; 1428 1429 free: 1430 free_dma(dma); 1431 1432 err: 1433 printk(KERN_WARNING DRIVER_NAME ": Unable to allocate DMA %d. " 1434 "Falling back on FIFO.\n", dma); 1435 } 1436 1437 static void wbsd_release_dma(struct wbsd_host *host) 1438 { 1439 if (host->dma_addr) { 1440 dma_unmap_single(mmc_dev(host->mmc), host->dma_addr, 1441 WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); 1442 } 1443 kfree(host->dma_buffer); 1444 if (host->dma >= 0) 1445 free_dma(host->dma); 1446 1447 host->dma = -1; 1448 host->dma_buffer = NULL; 1449 host->dma_addr = 0; 1450 } 1451 1452 /* 1453 * Allocate/free IRQ. 1454 */ 1455 1456 static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) 1457 { 1458 int ret; 1459 1460 /* 1461 * Set up tasklets. Must be done before requesting interrupt. 1462 */ 1463 tasklet_init(&host->card_tasklet, wbsd_tasklet_card, 1464 (unsigned long)host); 1465 tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, 1466 (unsigned long)host); 1467 tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, 1468 (unsigned long)host); 1469 tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, 1470 (unsigned long)host); 1471 tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, 1472 (unsigned long)host); 1473 1474 /* 1475 * Allocate interrupt. 1476 */ 1477 ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); 1478 if (ret) 1479 return ret; 1480 1481 host->irq = irq; 1482 1483 return 0; 1484 } 1485 1486 static void wbsd_release_irq(struct wbsd_host *host) 1487 { 1488 if (!host->irq) 1489 return; 1490 1491 free_irq(host->irq, host); 1492 1493 host->irq = 0; 1494 1495 tasklet_kill(&host->card_tasklet); 1496 tasklet_kill(&host->fifo_tasklet); 1497 tasklet_kill(&host->crc_tasklet); 1498 tasklet_kill(&host->timeout_tasklet); 1499 tasklet_kill(&host->finish_tasklet); 1500 } 1501 1502 /* 1503 * Allocate all resources for the host. 1504 */ 1505 1506 static int __devinit wbsd_request_resources(struct wbsd_host *host, 1507 int base, int irq, int dma) 1508 { 1509 int ret; 1510 1511 /* 1512 * Allocate I/O ports. 1513 */ 1514 ret = wbsd_request_region(host, base); 1515 if (ret) 1516 return ret; 1517 1518 /* 1519 * Allocate interrupt. 1520 */ 1521 ret = wbsd_request_irq(host, irq); 1522 if (ret) 1523 return ret; 1524 1525 /* 1526 * Allocate DMA. 1527 */ 1528 wbsd_request_dma(host, dma); 1529 1530 return 0; 1531 } 1532 1533 /* 1534 * Release all resources for the host. 1535 */ 1536 1537 static void wbsd_release_resources(struct wbsd_host *host) 1538 { 1539 wbsd_release_dma(host); 1540 wbsd_release_irq(host); 1541 wbsd_release_regions(host); 1542 } 1543 1544 /* 1545 * Configure the resources the chip should use. 1546 */ 1547 1548 static void wbsd_chip_config(struct wbsd_host *host) 1549 { 1550 wbsd_unlock_config(host); 1551 1552 /* 1553 * Reset the chip. 1554 */ 1555 wbsd_write_config(host, WBSD_CONF_SWRST, 1); 1556 wbsd_write_config(host, WBSD_CONF_SWRST, 0); 1557 1558 /* 1559 * Select SD/MMC function. 1560 */ 1561 wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); 1562 1563 /* 1564 * Set up card detection. 1565 */ 1566 wbsd_write_config(host, WBSD_CONF_PINS, WBSD_PINS_DETECT_GP11); 1567 1568 /* 1569 * Configure chip 1570 */ 1571 wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8); 1572 wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff); 1573 1574 wbsd_write_config(host, WBSD_CONF_IRQ, host->irq); 1575 1576 if (host->dma >= 0) 1577 wbsd_write_config(host, WBSD_CONF_DRQ, host->dma); 1578 1579 /* 1580 * Enable and power up chip. 1581 */ 1582 wbsd_write_config(host, WBSD_CONF_ENABLE, 1); 1583 wbsd_write_config(host, WBSD_CONF_POWER, 0x20); 1584 1585 wbsd_lock_config(host); 1586 } 1587 1588 /* 1589 * Check that configured resources are correct. 1590 */ 1591 1592 static int wbsd_chip_validate(struct wbsd_host *host) 1593 { 1594 int base, irq, dma; 1595 1596 wbsd_unlock_config(host); 1597 1598 /* 1599 * Select SD/MMC function. 1600 */ 1601 wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); 1602 1603 /* 1604 * Read configuration. 1605 */ 1606 base = wbsd_read_config(host, WBSD_CONF_PORT_HI) << 8; 1607 base |= wbsd_read_config(host, WBSD_CONF_PORT_LO); 1608 1609 irq = wbsd_read_config(host, WBSD_CONF_IRQ); 1610 1611 dma = wbsd_read_config(host, WBSD_CONF_DRQ); 1612 1613 wbsd_lock_config(host); 1614 1615 /* 1616 * Validate against given configuration. 1617 */ 1618 if (base != host->base) 1619 return 0; 1620 if (irq != host->irq) 1621 return 0; 1622 if ((dma != host->dma) && (host->dma != -1)) 1623 return 0; 1624 1625 return 1; 1626 } 1627 1628 /* 1629 * Powers down the SD function 1630 */ 1631 1632 static void wbsd_chip_poweroff(struct wbsd_host *host) 1633 { 1634 wbsd_unlock_config(host); 1635 1636 wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); 1637 wbsd_write_config(host, WBSD_CONF_ENABLE, 0); 1638 1639 wbsd_lock_config(host); 1640 } 1641 1642 /*****************************************************************************\ 1643 * * 1644 * Devices setup and shutdown * 1645 * * 1646 \*****************************************************************************/ 1647 1648 static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, 1649 int pnp) 1650 { 1651 struct wbsd_host *host = NULL; 1652 struct mmc_host *mmc = NULL; 1653 int ret; 1654 1655 ret = wbsd_alloc_mmc(dev); 1656 if (ret) 1657 return ret; 1658 1659 mmc = dev_get_drvdata(dev); 1660 host = mmc_priv(mmc); 1661 1662 /* 1663 * Scan for hardware. 1664 */ 1665 ret = wbsd_scan(host); 1666 if (ret) { 1667 if (pnp && (ret == -ENODEV)) { 1668 printk(KERN_WARNING DRIVER_NAME 1669 ": Unable to confirm device presence. You may " 1670 "experience lock-ups.\n"); 1671 } else { 1672 wbsd_free_mmc(dev); 1673 return ret; 1674 } 1675 } 1676 1677 /* 1678 * Request resources. 1679 */ 1680 ret = wbsd_request_resources(host, base, irq, dma); 1681 if (ret) { 1682 wbsd_release_resources(host); 1683 wbsd_free_mmc(dev); 1684 return ret; 1685 } 1686 1687 /* 1688 * See if chip needs to be configured. 1689 */ 1690 if (pnp) { 1691 if ((host->config != 0) && !wbsd_chip_validate(host)) { 1692 printk(KERN_WARNING DRIVER_NAME 1693 ": PnP active but chip not configured! " 1694 "You probably have a buggy BIOS. " 1695 "Configuring chip manually.\n"); 1696 wbsd_chip_config(host); 1697 } 1698 } else 1699 wbsd_chip_config(host); 1700 1701 /* 1702 * Power Management stuff. No idea how this works. 1703 * Not tested. 1704 */ 1705 #ifdef CONFIG_PM 1706 if (host->config) { 1707 wbsd_unlock_config(host); 1708 wbsd_write_config(host, WBSD_CONF_PME, 0xA0); 1709 wbsd_lock_config(host); 1710 } 1711 #endif 1712 /* 1713 * Allow device to initialise itself properly. 1714 */ 1715 mdelay(5); 1716 1717 /* 1718 * Reset the chip into a known state. 1719 */ 1720 wbsd_init_device(host); 1721 1722 mmc_add_host(mmc); 1723 1724 printk(KERN_INFO "%s: W83L51xD", mmc_hostname(mmc)); 1725 if (host->chip_id != 0) 1726 printk(" id %x", (int)host->chip_id); 1727 printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); 1728 if (host->dma >= 0) 1729 printk(" dma %d", (int)host->dma); 1730 else 1731 printk(" FIFO"); 1732 if (pnp) 1733 printk(" PnP"); 1734 printk("\n"); 1735 1736 return 0; 1737 } 1738 1739 static void __devexit wbsd_shutdown(struct device *dev, int pnp) 1740 { 1741 struct mmc_host *mmc = dev_get_drvdata(dev); 1742 struct wbsd_host *host; 1743 1744 if (!mmc) 1745 return; 1746 1747 host = mmc_priv(mmc); 1748 1749 mmc_remove_host(mmc); 1750 1751 /* 1752 * Power down the SD/MMC function. 1753 */ 1754 if (!pnp) 1755 wbsd_chip_poweroff(host); 1756 1757 wbsd_release_resources(host); 1758 1759 wbsd_free_mmc(dev); 1760 } 1761 1762 /* 1763 * Non-PnP 1764 */ 1765 1766 static int __devinit wbsd_probe(struct platform_device *dev) 1767 { 1768 /* Use the module parameters for resources */ 1769 return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0); 1770 } 1771 1772 static int __devexit wbsd_remove(struct platform_device *dev) 1773 { 1774 wbsd_shutdown(&dev->dev, 0); 1775 1776 return 0; 1777 } 1778 1779 /* 1780 * PnP 1781 */ 1782 1783 #ifdef CONFIG_PNP 1784 1785 static int __devinit 1786 wbsd_pnp_probe(struct pnp_dev *pnpdev, const struct pnp_device_id *dev_id) 1787 { 1788 int io, irq, dma; 1789 1790 /* 1791 * Get resources from PnP layer. 1792 */ 1793 io = pnp_port_start(pnpdev, 0); 1794 irq = pnp_irq(pnpdev, 0); 1795 if (pnp_dma_valid(pnpdev, 0)) 1796 dma = pnp_dma(pnpdev, 0); 1797 else 1798 dma = -1; 1799 1800 DBGF("PnP resources: port %3x irq %d dma %d\n", io, irq, dma); 1801 1802 return wbsd_init(&pnpdev->dev, io, irq, dma, 1); 1803 } 1804 1805 static void __devexit wbsd_pnp_remove(struct pnp_dev *dev) 1806 { 1807 wbsd_shutdown(&dev->dev, 1); 1808 } 1809 1810 #endif /* CONFIG_PNP */ 1811 1812 /* 1813 * Power management 1814 */ 1815 1816 #ifdef CONFIG_PM 1817 1818 static int wbsd_suspend(struct wbsd_host *host, pm_message_t state) 1819 { 1820 BUG_ON(host == NULL); 1821 1822 return mmc_suspend_host(host->mmc); 1823 } 1824 1825 static int wbsd_resume(struct wbsd_host *host) 1826 { 1827 BUG_ON(host == NULL); 1828 1829 wbsd_init_device(host); 1830 1831 return mmc_resume_host(host->mmc); 1832 } 1833 1834 static int wbsd_platform_suspend(struct platform_device *dev, 1835 pm_message_t state) 1836 { 1837 struct mmc_host *mmc = platform_get_drvdata(dev); 1838 struct wbsd_host *host; 1839 int ret; 1840 1841 if (mmc == NULL) 1842 return 0; 1843 1844 DBGF("Suspending...\n"); 1845 1846 host = mmc_priv(mmc); 1847 1848 ret = wbsd_suspend(host, state); 1849 if (ret) 1850 return ret; 1851 1852 wbsd_chip_poweroff(host); 1853 1854 return 0; 1855 } 1856 1857 static int wbsd_platform_resume(struct platform_device *dev) 1858 { 1859 struct mmc_host *mmc = platform_get_drvdata(dev); 1860 struct wbsd_host *host; 1861 1862 if (mmc == NULL) 1863 return 0; 1864 1865 DBGF("Resuming...\n"); 1866 1867 host = mmc_priv(mmc); 1868 1869 wbsd_chip_config(host); 1870 1871 /* 1872 * Allow device to initialise itself properly. 1873 */ 1874 mdelay(5); 1875 1876 return wbsd_resume(host); 1877 } 1878 1879 #ifdef CONFIG_PNP 1880 1881 static int wbsd_pnp_suspend(struct pnp_dev *pnp_dev, pm_message_t state) 1882 { 1883 struct mmc_host *mmc = dev_get_drvdata(&pnp_dev->dev); 1884 struct wbsd_host *host; 1885 1886 if (mmc == NULL) 1887 return 0; 1888 1889 DBGF("Suspending...\n"); 1890 1891 host = mmc_priv(mmc); 1892 1893 return wbsd_suspend(host, state); 1894 } 1895 1896 static int wbsd_pnp_resume(struct pnp_dev *pnp_dev) 1897 { 1898 struct mmc_host *mmc = dev_get_drvdata(&pnp_dev->dev); 1899 struct wbsd_host *host; 1900 1901 if (mmc == NULL) 1902 return 0; 1903 1904 DBGF("Resuming...\n"); 1905 1906 host = mmc_priv(mmc); 1907 1908 /* 1909 * See if chip needs to be configured. 1910 */ 1911 if (host->config != 0) { 1912 if (!wbsd_chip_validate(host)) { 1913 printk(KERN_WARNING DRIVER_NAME 1914 ": PnP active but chip not configured! " 1915 "You probably have a buggy BIOS. " 1916 "Configuring chip manually.\n"); 1917 wbsd_chip_config(host); 1918 } 1919 } 1920 1921 /* 1922 * Allow device to initialise itself properly. 1923 */ 1924 mdelay(5); 1925 1926 return wbsd_resume(host); 1927 } 1928 1929 #endif /* CONFIG_PNP */ 1930 1931 #else /* CONFIG_PM */ 1932 1933 #define wbsd_platform_suspend NULL 1934 #define wbsd_platform_resume NULL 1935 1936 #define wbsd_pnp_suspend NULL 1937 #define wbsd_pnp_resume NULL 1938 1939 #endif /* CONFIG_PM */ 1940 1941 static struct platform_device *wbsd_device; 1942 1943 static struct platform_driver wbsd_driver = { 1944 .probe = wbsd_probe, 1945 .remove = __devexit_p(wbsd_remove), 1946 1947 .suspend = wbsd_platform_suspend, 1948 .resume = wbsd_platform_resume, 1949 .driver = { 1950 .name = DRIVER_NAME, 1951 .owner = THIS_MODULE, 1952 }, 1953 }; 1954 1955 #ifdef CONFIG_PNP 1956 1957 static struct pnp_driver wbsd_pnp_driver = { 1958 .name = DRIVER_NAME, 1959 .id_table = pnp_dev_table, 1960 .probe = wbsd_pnp_probe, 1961 .remove = __devexit_p(wbsd_pnp_remove), 1962 1963 .suspend = wbsd_pnp_suspend, 1964 .resume = wbsd_pnp_resume, 1965 }; 1966 1967 #endif /* CONFIG_PNP */ 1968 1969 /* 1970 * Module loading/unloading 1971 */ 1972 1973 static int __init wbsd_drv_init(void) 1974 { 1975 int result; 1976 1977 printk(KERN_INFO DRIVER_NAME 1978 ": Winbond W83L51xD SD/MMC card interface driver\n"); 1979 printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); 1980 1981 #ifdef CONFIG_PNP 1982 1983 if (!param_nopnp) { 1984 result = pnp_register_driver(&wbsd_pnp_driver); 1985 if (result < 0) 1986 return result; 1987 } 1988 #endif /* CONFIG_PNP */ 1989 1990 if (param_nopnp) { 1991 result = platform_driver_register(&wbsd_driver); 1992 if (result < 0) 1993 return result; 1994 1995 wbsd_device = platform_device_alloc(DRIVER_NAME, -1); 1996 if (!wbsd_device) { 1997 platform_driver_unregister(&wbsd_driver); 1998 return -ENOMEM; 1999 } 2000 2001 result = platform_device_add(wbsd_device); 2002 if (result) { 2003 platform_device_put(wbsd_device); 2004 platform_driver_unregister(&wbsd_driver); 2005 return result; 2006 } 2007 } 2008 2009 return 0; 2010 } 2011 2012 static void __exit wbsd_drv_exit(void) 2013 { 2014 #ifdef CONFIG_PNP 2015 2016 if (!param_nopnp) 2017 pnp_unregister_driver(&wbsd_pnp_driver); 2018 2019 #endif /* CONFIG_PNP */ 2020 2021 if (param_nopnp) { 2022 platform_device_unregister(wbsd_device); 2023 2024 platform_driver_unregister(&wbsd_driver); 2025 } 2026 2027 DBG("unloaded\n"); 2028 } 2029 2030 module_init(wbsd_drv_init); 2031 module_exit(wbsd_drv_exit); 2032 #ifdef CONFIG_PNP 2033 module_param_named(nopnp, param_nopnp, uint, 0444); 2034 #endif 2035 module_param_named(io, param_io, uint, 0444); 2036 module_param_named(irq, param_irq, uint, 0444); 2037 module_param_named(dma, param_dma, int, 0444); 2038 2039 MODULE_LICENSE("GPL"); 2040 MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); 2041 MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver"); 2042 2043 #ifdef CONFIG_PNP 2044 MODULE_PARM_DESC(nopnp, "Scan for device instead of relying on PNP. (default 0)"); 2045 #endif 2046 MODULE_PARM_DESC(io, "I/O base to allocate. Must be 8 byte aligned. (default 0x248)"); 2047 MODULE_PARM_DESC(irq, "IRQ to allocate. (default 6)"); 2048 MODULE_PARM_DESC(dma, "DMA channel to allocate. -1 for no DMA. (default 2)"); 2049