1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Support for SDHCI on STMicroelectronics SoCs 4 * 5 * Copyright (C) 2014 STMicroelectronics Ltd 6 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 7 * Contributors: Peter Griffin <peter.griffin@linaro.org> 8 * 9 * Based on sdhci-cns3xxx.c 10 */ 11 12 #include <linux/io.h> 13 #include <linux/of.h> 14 #include <linux/module.h> 15 #include <linux/err.h> 16 #include <linux/mmc/host.h> 17 #include <linux/reset.h> 18 #include "sdhci-pltfm.h" 19 20 struct st_mmc_platform_data { 21 struct reset_control *rstc; 22 struct clk *icnclk; 23 void __iomem *top_ioaddr; 24 }; 25 26 /* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */ 27 28 #define ST_MMC_CCONFIG_REG_1 0x400 29 #define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24) 30 #define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12) 31 #define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8) 32 #define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0) 33 #define ST_MMC_CCONFIG_1_DEFAULT \ 34 ((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \ 35 (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \ 36 (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT)) 37 38 #define ST_MMC_CCONFIG_REG_2 0x404 39 #define ST_MMC_CCONFIG_HIGH_SPEED BIT(28) 40 #define ST_MMC_CCONFIG_ADMA2 BIT(24) 41 #define ST_MMC_CCONFIG_8BIT BIT(20) 42 #define ST_MMC_CCONFIG_MAX_BLK_LEN 16 43 #define MAX_BLK_LEN_1024 1 44 #define MAX_BLK_LEN_2048 2 45 #define BASE_CLK_FREQ_200 0xc8 46 #define BASE_CLK_FREQ_100 0x64 47 #define BASE_CLK_FREQ_50 0x32 48 #define ST_MMC_CCONFIG_2_DEFAULT \ 49 (ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \ 50 ST_MMC_CCONFIG_8BIT | \ 51 (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN)) 52 53 #define ST_MMC_CCONFIG_REG_3 0x408 54 #define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28) 55 #define ST_MMC_CCONFIG_64BIT BIT(24) 56 #define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20) 57 #define ST_MMC_CCONFIG_1P8_VOLT BIT(16) 58 #define ST_MMC_CCONFIG_3P0_VOLT BIT(12) 59 #define ST_MMC_CCONFIG_3P3_VOLT BIT(8) 60 #define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4) 61 #define ST_MMC_CCONFIG_SDMA BIT(0) 62 #define ST_MMC_CCONFIG_3_DEFAULT \ 63 (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \ 64 ST_MMC_CCONFIG_3P3_VOLT | \ 65 ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \ 66 ST_MMC_CCONFIG_SDMA) 67 68 #define ST_MMC_CCONFIG_REG_4 0x40c 69 #define ST_MMC_CCONFIG_D_DRIVER BIT(20) 70 #define ST_MMC_CCONFIG_C_DRIVER BIT(16) 71 #define ST_MMC_CCONFIG_A_DRIVER BIT(12) 72 #define ST_MMC_CCONFIG_DDR50 BIT(8) 73 #define ST_MMC_CCONFIG_SDR104 BIT(4) 74 #define ST_MMC_CCONFIG_SDR50 BIT(0) 75 #define ST_MMC_CCONFIG_4_DEFAULT 0 76 77 #define ST_MMC_CCONFIG_REG_5 0x410 78 #define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8) 79 #define RETUNING_TIMER_CNT_MAX 0xf 80 #define ST_MMC_CCONFIG_5_DEFAULT 0 81 82 /* I/O configuration for Arasan IP */ 83 #define ST_MMC_GP_OUTPUT 0x450 84 #define ST_MMC_GP_OUTPUT_CD BIT(12) 85 86 #define ST_MMC_STATUS_R 0x460 87 88 #define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8) 89 90 /* TOP config registers to manage static and dynamic delay */ 91 #define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8) 92 #define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc) 93 /* MMC delay control register */ 94 #define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18) 95 #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0) 96 #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1) 97 #define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8) 98 #define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9) 99 #define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10) 100 #define ST_TOP_MMC_START_DLL_LOCK BIT(11) 101 102 /* register to provide the phase-shift value for DLL */ 103 #define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c) 104 #define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20) 105 #define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24) 106 107 /* phase shift delay on the tx clk 2.188ns */ 108 #define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6 109 110 #define ST_TOP_MMC_DLY_MAX 0xf 111 112 #define ST_TOP_MMC_DYN_DLY_CONF \ 113 (ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \ 114 ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \ 115 ST_TOP_MMC_START_DLL_LOCK) 116 117 /* 118 * For clock speeds greater than 90MHz, we need to check that the 119 * DLL procedure has finished before switching to ultra-speed modes. 120 */ 121 #define CLK_TO_CHECK_DLL_LOCK 90000000 122 123 static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) 124 { 125 if (!ioaddr) 126 return; 127 128 writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL); 129 writel_relaxed(ST_TOP_MMC_DLY_MAX, 130 ioaddr + ST_TOP_MMC_TX_CLK_DLY); 131 } 132 133 /** 134 * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. 135 * @np: dt device node. 136 * @host: sdhci host 137 * Description: this function is to configure the Arasan host controller. 138 * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated 139 * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 140 * or eMMC4.3. This has to be done before registering the sdhci host. 141 */ 142 static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) 143 { 144 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 145 struct mmc_host *mhost = host->mmc; 146 u32 cconf2, cconf3, cconf4, cconf5; 147 148 if (!of_device_is_compatible(np, "st,sdhci-stih407")) 149 return; 150 151 cconf2 = ST_MMC_CCONFIG_2_DEFAULT; 152 cconf3 = ST_MMC_CCONFIG_3_DEFAULT; 153 cconf4 = ST_MMC_CCONFIG_4_DEFAULT; 154 cconf5 = ST_MMC_CCONFIG_5_DEFAULT; 155 156 writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, 157 host->ioaddr + ST_MMC_CCONFIG_REG_1); 158 159 /* Set clock frequency, default to 50MHz if max-frequency is not 160 * provided */ 161 162 switch (mhost->f_max) { 163 case 200000000: 164 clk_set_rate(pltfm_host->clk, mhost->f_max); 165 cconf2 |= BASE_CLK_FREQ_200; 166 break; 167 case 100000000: 168 clk_set_rate(pltfm_host->clk, mhost->f_max); 169 cconf2 |= BASE_CLK_FREQ_100; 170 break; 171 default: 172 clk_set_rate(pltfm_host->clk, 50000000); 173 cconf2 |= BASE_CLK_FREQ_50; 174 } 175 176 writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); 177 178 if (!mmc_card_is_removable(mhost)) 179 cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; 180 else 181 /* CARD _D ET_CTRL */ 182 writel_relaxed(ST_MMC_GP_OUTPUT_CD, 183 host->ioaddr + ST_MMC_GP_OUTPUT); 184 185 if (mhost->caps & MMC_CAP_UHS_SDR50) { 186 /* use 1.8V */ 187 cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; 188 cconf4 |= ST_MMC_CCONFIG_SDR50; 189 /* Use tuning */ 190 cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; 191 /* Max timeout for retuning */ 192 cconf5 |= RETUNING_TIMER_CNT_MAX; 193 } 194 195 if (mhost->caps & MMC_CAP_UHS_SDR104) { 196 /* 197 * SDR104 implies the HC can support HS200 mode, so 198 * it's mandatory to use 1.8V 199 */ 200 cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; 201 cconf4 |= ST_MMC_CCONFIG_SDR104; 202 /* Max timeout for retuning */ 203 cconf5 |= RETUNING_TIMER_CNT_MAX; 204 } 205 206 if (mhost->caps & MMC_CAP_UHS_DDR50) 207 cconf4 |= ST_MMC_CCONFIG_DDR50; 208 209 writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); 210 writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); 211 writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); 212 } 213 214 static inline void st_mmcss_set_dll(void __iomem *ioaddr) 215 { 216 if (!ioaddr) 217 return; 218 219 writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL); 220 writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID, 221 ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY); 222 } 223 224 static int st_mmcss_lock_dll(void __iomem *ioaddr) 225 { 226 unsigned long curr, value; 227 unsigned long finish = jiffies + HZ; 228 229 /* Checks if the DLL procedure is finished */ 230 do { 231 curr = jiffies; 232 value = readl(ioaddr + ST_MMC_STATUS_R); 233 if (value & 0x1) 234 return 0; 235 236 cpu_relax(); 237 } while (!time_after_eq(curr, finish)); 238 239 return -EBUSY; 240 } 241 242 static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) 243 { 244 int ret = 0; 245 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 246 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 247 248 if (host->clock > CLK_TO_CHECK_DLL_LOCK) { 249 st_mmcss_set_dll(pdata->top_ioaddr); 250 ret = st_mmcss_lock_dll(host->ioaddr); 251 } 252 253 return ret; 254 } 255 256 static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, 257 unsigned int uhs) 258 { 259 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 260 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 261 u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); 262 int ret = 0; 263 264 /* Select Bus Speed Mode for host */ 265 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; 266 switch (uhs) { 267 /* 268 * Set V18_EN -- UHS modes do not work without this. 269 * does not change signaling voltage 270 */ 271 272 case MMC_TIMING_UHS_SDR12: 273 st_mmcss_set_static_delay(pdata->top_ioaddr); 274 ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; 275 break; 276 case MMC_TIMING_UHS_SDR25: 277 st_mmcss_set_static_delay(pdata->top_ioaddr); 278 ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; 279 break; 280 case MMC_TIMING_UHS_SDR50: 281 st_mmcss_set_static_delay(pdata->top_ioaddr); 282 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; 283 ret = sdhci_st_set_dll_for_clock(host); 284 break; 285 case MMC_TIMING_UHS_SDR104: 286 case MMC_TIMING_MMC_HS200: 287 st_mmcss_set_static_delay(pdata->top_ioaddr); 288 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; 289 ret = sdhci_st_set_dll_for_clock(host); 290 break; 291 case MMC_TIMING_UHS_DDR50: 292 case MMC_TIMING_MMC_DDR52: 293 st_mmcss_set_static_delay(pdata->top_ioaddr); 294 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; 295 break; 296 } 297 298 if (ret) 299 dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " 300 "(uhs %d)\n", uhs); 301 302 dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); 303 304 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); 305 } 306 307 static u32 sdhci_st_readl(struct sdhci_host *host, int reg) 308 { 309 u32 ret; 310 311 switch (reg) { 312 case SDHCI_CAPABILITIES: 313 ret = readl_relaxed(host->ioaddr + reg); 314 /* Support 3.3V and 1.8V */ 315 ret &= ~SDHCI_CAN_VDD_300; 316 break; 317 default: 318 ret = readl_relaxed(host->ioaddr + reg); 319 } 320 return ret; 321 } 322 323 static const struct sdhci_ops sdhci_st_ops = { 324 .get_max_clock = sdhci_pltfm_clk_get_max_clock, 325 .set_clock = sdhci_set_clock, 326 .set_bus_width = sdhci_set_bus_width, 327 .read_l = sdhci_st_readl, 328 .reset = sdhci_reset, 329 .set_uhs_signaling = sdhci_st_set_uhs_signaling, 330 }; 331 332 static const struct sdhci_pltfm_data sdhci_st_pdata = { 333 .ops = &sdhci_st_ops, 334 .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | 335 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | 336 SDHCI_QUIRK_NO_HISPD_BIT, 337 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | 338 SDHCI_QUIRK2_STOP_WITH_TC, 339 }; 340 341 342 static int sdhci_st_probe(struct platform_device *pdev) 343 { 344 struct device_node *np = pdev->dev.of_node; 345 struct sdhci_host *host; 346 struct st_mmc_platform_data *pdata; 347 struct sdhci_pltfm_host *pltfm_host; 348 struct clk *clk, *icnclk; 349 int ret = 0; 350 u16 host_version; 351 struct reset_control *rstc; 352 353 clk = devm_clk_get(&pdev->dev, "mmc"); 354 if (IS_ERR(clk)) { 355 dev_err(&pdev->dev, "Peripheral clk not found\n"); 356 return PTR_ERR(clk); 357 } 358 359 /* ICN clock isn't compulsory, but use it if it's provided. */ 360 icnclk = devm_clk_get(&pdev->dev, "icn"); 361 if (IS_ERR(icnclk)) 362 icnclk = NULL; 363 364 rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); 365 if (IS_ERR(rstc)) 366 return PTR_ERR(rstc); 367 reset_control_deassert(rstc); 368 369 host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, sizeof(*pdata)); 370 if (IS_ERR(host)) { 371 dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); 372 ret = PTR_ERR(host); 373 goto err_pltfm_init; 374 } 375 376 pltfm_host = sdhci_priv(host); 377 pdata = sdhci_pltfm_priv(pltfm_host); 378 pdata->rstc = rstc; 379 380 ret = mmc_of_parse(host->mmc); 381 if (ret) { 382 dev_err(&pdev->dev, "Failed mmc_of_parse\n"); 383 goto err_of; 384 } 385 386 ret = clk_prepare_enable(clk); 387 if (ret) { 388 dev_err(&pdev->dev, "Failed to prepare clock\n"); 389 goto err_of; 390 } 391 392 ret = clk_prepare_enable(icnclk); 393 if (ret) { 394 dev_err(&pdev->dev, "Failed to prepare icn clock\n"); 395 goto err_icnclk; 396 } 397 398 /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ 399 pdata->top_ioaddr = devm_platform_ioremap_resource_byname(pdev, "top-mmc-delay"); 400 if (IS_ERR(pdata->top_ioaddr)) 401 pdata->top_ioaddr = NULL; 402 403 pltfm_host->clk = clk; 404 pdata->icnclk = icnclk; 405 406 /* Configure the Arasan HC inside the flashSS */ 407 st_mmcss_cconfig(np, host); 408 409 ret = sdhci_add_host(host); 410 if (ret) 411 goto err_out; 412 413 host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); 414 415 dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", 416 ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), 417 ((host_version & SDHCI_VENDOR_VER_MASK) >> 418 SDHCI_VENDOR_VER_SHIFT)); 419 420 return 0; 421 422 err_out: 423 clk_disable_unprepare(icnclk); 424 err_icnclk: 425 clk_disable_unprepare(clk); 426 err_of: 427 sdhci_pltfm_free(pdev); 428 err_pltfm_init: 429 reset_control_assert(rstc); 430 431 return ret; 432 } 433 434 static void sdhci_st_remove(struct platform_device *pdev) 435 { 436 struct sdhci_host *host = platform_get_drvdata(pdev); 437 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 438 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 439 struct reset_control *rstc = pdata->rstc; 440 struct clk *clk = pltfm_host->clk; 441 442 sdhci_pltfm_remove(pdev); 443 444 clk_disable_unprepare(pdata->icnclk); 445 clk_disable_unprepare(clk); 446 447 reset_control_assert(rstc); 448 } 449 450 #ifdef CONFIG_PM_SLEEP 451 static int sdhci_st_suspend(struct device *dev) 452 { 453 struct sdhci_host *host = dev_get_drvdata(dev); 454 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 455 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 456 int ret; 457 458 if (host->tuning_mode != SDHCI_TUNING_MODE_3) 459 mmc_retune_needed(host->mmc); 460 461 ret = sdhci_suspend_host(host); 462 if (ret) 463 goto out; 464 465 reset_control_assert(pdata->rstc); 466 467 clk_disable_unprepare(pdata->icnclk); 468 clk_disable_unprepare(pltfm_host->clk); 469 out: 470 return ret; 471 } 472 473 static int sdhci_st_resume(struct device *dev) 474 { 475 struct sdhci_host *host = dev_get_drvdata(dev); 476 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 477 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 478 struct device_node *np = dev->of_node; 479 int ret; 480 481 ret = clk_prepare_enable(pltfm_host->clk); 482 if (ret) 483 return ret; 484 485 ret = clk_prepare_enable(pdata->icnclk); 486 if (ret) { 487 clk_disable_unprepare(pltfm_host->clk); 488 return ret; 489 } 490 491 reset_control_deassert(pdata->rstc); 492 493 st_mmcss_cconfig(np, host); 494 495 return sdhci_resume_host(host); 496 } 497 #endif 498 499 static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); 500 501 static const struct of_device_id st_sdhci_match[] = { 502 { .compatible = "st,sdhci" }, 503 {}, 504 }; 505 506 MODULE_DEVICE_TABLE(of, st_sdhci_match); 507 508 static struct platform_driver sdhci_st_driver = { 509 .probe = sdhci_st_probe, 510 .remove = sdhci_st_remove, 511 .driver = { 512 .name = "sdhci-st", 513 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 514 .pm = &sdhci_st_pmops, 515 .of_match_table = st_sdhci_match, 516 }, 517 }; 518 519 module_platform_driver(sdhci_st_driver); 520 521 MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); 522 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 523 MODULE_LICENSE("GPL v2"); 524 MODULE_ALIAS("platform:sdhci-st"); 525