1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2013 BayHub Technology Ltd. 4 * 5 * Authors: Peter Guo <peter.guo@bayhubtech.com> 6 * Adam Lee <adam.lee@canonical.com> 7 * Ernest Zhang <ernest.zhang@bayhubtech.com> 8 */ 9 10 #include <linux/pci.h> 11 #include <linux/mmc/host.h> 12 #include <linux/mmc/mmc.h> 13 #include <linux/delay.h> 14 #include <linux/iopoll.h> 15 16 #include "sdhci.h" 17 #include "sdhci-pci.h" 18 19 /* 20 * O2Micro device registers 21 */ 22 23 #define O2_SD_MISC_REG5 0x64 24 #define O2_SD_LD0_CTRL 0x68 25 #define O2_SD_DEV_CTRL 0x88 26 #define O2_SD_LOCK_WP 0xD3 27 #define O2_SD_TEST_REG 0xD4 28 #define O2_SD_FUNC_REG0 0xDC 29 #define O2_SD_MULTI_VCC3V 0xEE 30 #define O2_SD_CLKREQ 0xEC 31 #define O2_SD_CAPS 0xE0 32 #define O2_SD_ADMA1 0xE2 33 #define O2_SD_ADMA2 0xE7 34 #define O2_SD_INF_MOD 0xF1 35 #define O2_SD_MISC_CTRL4 0xFC 36 #define O2_SD_MISC_CTRL 0x1C0 37 #define O2_SD_PWR_FORCE_L0 0x0002 38 #define O2_SD_TUNING_CTRL 0x300 39 #define O2_SD_PLL_SETTING 0x304 40 #define O2_SD_MISC_SETTING 0x308 41 #define O2_SD_CLK_SETTING 0x328 42 #define O2_SD_CAP_REG2 0x330 43 #define O2_SD_CAP_REG0 0x334 44 #define O2_SD_UHS1_CAP_SETTING 0x33C 45 #define O2_SD_DELAY_CTRL 0x350 46 #define O2_SD_UHS2_L1_CTRL 0x35C 47 #define O2_SD_FUNC_REG3 0x3E0 48 #define O2_SD_FUNC_REG4 0x3E4 49 #define O2_SD_LED_ENABLE BIT(6) 50 #define O2_SD_FREG0_LEDOFF BIT(13) 51 #define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) 52 53 #define O2_SD_VENDOR_SETTING 0x110 54 #define O2_SD_VENDOR_SETTING2 0x1C8 55 #define O2_SD_HW_TUNING_DISABLE BIT(4) 56 57 #define O2_PLL_DLL_WDT_CONTROL1 0x1CC 58 #define O2_PLL_FORCE_ACTIVE BIT(18) 59 #define O2_PLL_LOCK_STATUS BIT(14) 60 #define O2_PLL_SOFT_RESET BIT(12) 61 #define O2_DLL_LOCK_STATUS BIT(11) 62 63 #define O2_SD_DETECT_SETTING 0x324 64 65 static const u32 dmdn_table[] = {0x2B1C0000, 66 0x2C1A0000, 0x371B0000, 0x35100000}; 67 #define DMDN_SZ ARRAY_SIZE(dmdn_table) 68 69 struct o2_host { 70 u8 dll_adjust_count; 71 }; 72 73 static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host) 74 { 75 ktime_t timeout; 76 u32 scratch32; 77 78 /* Wait max 50 ms */ 79 timeout = ktime_add_ms(ktime_get(), 50); 80 while (1) { 81 bool timedout = ktime_after(ktime_get(), timeout); 82 83 scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE); 84 if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT 85 == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT) 86 break; 87 88 if (timedout) { 89 pr_err("%s: Card Detect debounce never finished.\n", 90 mmc_hostname(host->mmc)); 91 sdhci_dumpregs(host); 92 return; 93 } 94 udelay(10); 95 } 96 } 97 98 static void sdhci_o2_enable_internal_clock(struct sdhci_host *host) 99 { 100 ktime_t timeout; 101 u16 scratch; 102 u32 scratch32; 103 104 /* PLL software reset */ 105 scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); 106 scratch32 |= O2_PLL_SOFT_RESET; 107 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); 108 udelay(1); 109 scratch32 &= ~(O2_PLL_SOFT_RESET); 110 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); 111 112 /* PLL force active */ 113 scratch32 |= O2_PLL_FORCE_ACTIVE; 114 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); 115 116 /* Wait max 20 ms */ 117 timeout = ktime_add_ms(ktime_get(), 20); 118 while (1) { 119 bool timedout = ktime_after(ktime_get(), timeout); 120 121 scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1); 122 if (scratch & O2_PLL_LOCK_STATUS) 123 break; 124 if (timedout) { 125 pr_err("%s: Internal clock never stabilised.\n", 126 mmc_hostname(host->mmc)); 127 sdhci_dumpregs(host); 128 goto out; 129 } 130 udelay(10); 131 } 132 133 /* Wait for card detect finish */ 134 udelay(1); 135 sdhci_o2_wait_card_detect_stable(host); 136 137 out: 138 /* Cancel PLL force active */ 139 scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); 140 scratch32 &= ~O2_PLL_FORCE_ACTIVE; 141 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); 142 } 143 144 static int sdhci_o2_get_cd(struct mmc_host *mmc) 145 { 146 struct sdhci_host *host = mmc_priv(mmc); 147 148 if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS)) 149 sdhci_o2_enable_internal_clock(host); 150 151 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); 152 } 153 154 static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value) 155 { 156 u32 scratch_32; 157 158 pci_read_config_dword(chip->pdev, 159 O2_SD_PLL_SETTING, &scratch_32); 160 161 scratch_32 &= 0x0000FFFF; 162 scratch_32 |= value; 163 164 pci_write_config_dword(chip->pdev, 165 O2_SD_PLL_SETTING, scratch_32); 166 } 167 168 static u32 sdhci_o2_pll_dll_wdt_control(struct sdhci_host *host) 169 { 170 return sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); 171 } 172 173 /* 174 * This function is used to detect dll lock status. 175 * Since the dll lock status bit will toggle randomly 176 * with very short interval which needs to be polled 177 * as fast as possible. Set sleep_us as 1 microsecond. 178 */ 179 static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host) 180 { 181 u32 scratch32 = 0; 182 183 return readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host, 184 scratch32, !(scratch32 & O2_DLL_LOCK_STATUS), 1, 1000000); 185 } 186 187 static void sdhci_o2_set_tuning_mode(struct sdhci_host *host) 188 { 189 u16 reg; 190 191 /* enable hardware tuning */ 192 reg = sdhci_readw(host, O2_SD_VENDOR_SETTING); 193 reg &= ~O2_SD_HW_TUNING_DISABLE; 194 sdhci_writew(host, reg, O2_SD_VENDOR_SETTING); 195 } 196 197 static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode) 198 { 199 int i; 200 201 sdhci_send_tuning(host, opcode); 202 203 for (i = 0; i < 150; i++) { 204 u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); 205 206 if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { 207 if (ctrl & SDHCI_CTRL_TUNED_CLK) { 208 host->tuning_done = true; 209 return; 210 } 211 pr_warn("%s: HW tuning failed !\n", 212 mmc_hostname(host->mmc)); 213 break; 214 } 215 216 mdelay(1); 217 } 218 219 pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", 220 mmc_hostname(host->mmc)); 221 sdhci_reset_tuning(host); 222 } 223 224 /* 225 * This function is used to fix o2 dll shift issue. 226 * It isn't necessary to detect card present before recovery. 227 * Firstly, it is used by bht emmc card, which is embedded. 228 * Second, before call recovery card present will be detected 229 * outside of the execute tuning function. 230 */ 231 static int sdhci_o2_dll_recovery(struct sdhci_host *host) 232 { 233 int ret = 0; 234 u8 scratch_8 = 0; 235 u32 scratch_32 = 0; 236 struct sdhci_pci_slot *slot = sdhci_priv(host); 237 struct sdhci_pci_chip *chip = slot->chip; 238 struct o2_host *o2_host = sdhci_pci_priv(slot); 239 240 /* UnLock WP */ 241 pci_read_config_byte(chip->pdev, 242 O2_SD_LOCK_WP, &scratch_8); 243 scratch_8 &= 0x7f; 244 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); 245 while (o2_host->dll_adjust_count < DMDN_SZ && !ret) { 246 /* Disable clock */ 247 sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL); 248 249 /* PLL software reset */ 250 scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); 251 scratch_32 |= O2_PLL_SOFT_RESET; 252 sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1); 253 254 pci_read_config_dword(chip->pdev, 255 O2_SD_FUNC_REG4, 256 &scratch_32); 257 /* Enable Base Clk setting change */ 258 scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET; 259 pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32); 260 o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]); 261 262 /* Enable internal clock */ 263 scratch_8 = SDHCI_CLOCK_INT_EN; 264 sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL); 265 266 if (sdhci_o2_get_cd(host->mmc)) { 267 /* 268 * need wait at least 5ms for dll status stable, 269 * after enable internal clock 270 */ 271 usleep_range(5000, 6000); 272 if (sdhci_o2_wait_dll_detect_lock(host)) { 273 scratch_8 |= SDHCI_CLOCK_CARD_EN; 274 sdhci_writeb(host, scratch_8, 275 SDHCI_CLOCK_CONTROL); 276 ret = 1; 277 } else { 278 pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n", 279 mmc_hostname(host->mmc), 280 o2_host->dll_adjust_count); 281 } 282 } else { 283 pr_err("%s: card present detect failed.\n", 284 mmc_hostname(host->mmc)); 285 break; 286 } 287 288 o2_host->dll_adjust_count++; 289 } 290 if (!ret && o2_host->dll_adjust_count == DMDN_SZ) 291 pr_err("%s: DLL adjust over max times\n", 292 mmc_hostname(host->mmc)); 293 /* Lock WP */ 294 pci_read_config_byte(chip->pdev, 295 O2_SD_LOCK_WP, &scratch_8); 296 scratch_8 |= 0x80; 297 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); 298 return ret; 299 } 300 301 static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode) 302 { 303 struct sdhci_host *host = mmc_priv(mmc); 304 int current_bus_width = 0; 305 u32 scratch32 = 0; 306 u16 scratch = 0; 307 308 /* 309 * This handler only implements the eMMC tuning that is specific to 310 * this controller. Fall back to the standard method for other TIMING. 311 */ 312 if ((host->timing != MMC_TIMING_MMC_HS200) && 313 (host->timing != MMC_TIMING_UHS_SDR104)) 314 return sdhci_execute_tuning(mmc, opcode); 315 316 if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) && 317 (opcode != MMC_SEND_TUNING_BLOCK))) 318 return -EINVAL; 319 320 /* Force power mode enter L0 */ 321 scratch = sdhci_readw(host, O2_SD_MISC_CTRL); 322 scratch |= O2_SD_PWR_FORCE_L0; 323 sdhci_writew(host, scratch, O2_SD_MISC_CTRL); 324 325 /* wait DLL lock, timeout value 5ms */ 326 if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host, 327 scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000)) 328 pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n", 329 mmc_hostname(host->mmc)); 330 /* 331 * Judge the tuning reason, whether caused by dll shift 332 * If cause by dll shift, should call sdhci_o2_dll_recovery 333 */ 334 if (!sdhci_o2_wait_dll_detect_lock(host)) 335 if (!sdhci_o2_dll_recovery(host)) { 336 pr_err("%s: o2 dll recovery failed\n", 337 mmc_hostname(host->mmc)); 338 return -EINVAL; 339 } 340 /* 341 * o2 sdhci host didn't support 8bit emmc tuning 342 */ 343 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { 344 current_bus_width = mmc->ios.bus_width; 345 mmc->ios.bus_width = MMC_BUS_WIDTH_4; 346 sdhci_set_bus_width(host, MMC_BUS_WIDTH_4); 347 } 348 349 sdhci_o2_set_tuning_mode(host); 350 351 sdhci_start_tuning(host); 352 353 __sdhci_o2_execute_tuning(host, opcode); 354 355 sdhci_end_tuning(host); 356 357 if (current_bus_width == MMC_BUS_WIDTH_8) { 358 mmc->ios.bus_width = MMC_BUS_WIDTH_8; 359 sdhci_set_bus_width(host, current_bus_width); 360 } 361 362 /* Cancel force power mode enter L0 */ 363 scratch = sdhci_readw(host, O2_SD_MISC_CTRL); 364 scratch &= ~(O2_SD_PWR_FORCE_L0); 365 sdhci_writew(host, scratch, O2_SD_MISC_CTRL); 366 367 sdhci_reset(host, SDHCI_RESET_CMD); 368 sdhci_reset(host, SDHCI_RESET_DATA); 369 370 host->flags &= ~SDHCI_HS400_TUNING; 371 return 0; 372 } 373 374 static void o2_pci_led_enable(struct sdhci_pci_chip *chip) 375 { 376 int ret; 377 u32 scratch_32; 378 379 /* Set led of SD host function enable */ 380 ret = pci_read_config_dword(chip->pdev, 381 O2_SD_FUNC_REG0, &scratch_32); 382 if (ret) 383 return; 384 385 scratch_32 &= ~O2_SD_FREG0_LEDOFF; 386 pci_write_config_dword(chip->pdev, 387 O2_SD_FUNC_REG0, scratch_32); 388 389 ret = pci_read_config_dword(chip->pdev, 390 O2_SD_TEST_REG, &scratch_32); 391 if (ret) 392 return; 393 394 scratch_32 |= O2_SD_LED_ENABLE; 395 pci_write_config_dword(chip->pdev, 396 O2_SD_TEST_REG, scratch_32); 397 } 398 399 static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip) 400 { 401 u32 scratch_32; 402 int ret; 403 /* Improve write performance for SD3.0 */ 404 ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32); 405 if (ret) 406 return; 407 scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14)); 408 pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32); 409 410 /* Enable Link abnormal reset generating Reset */ 411 ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32); 412 if (ret) 413 return; 414 scratch_32 &= ~((1 << 19) | (1 << 11)); 415 scratch_32 |= (1 << 10); 416 pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32); 417 418 /* set card power over current protection */ 419 ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32); 420 if (ret) 421 return; 422 scratch_32 |= (1 << 4); 423 pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32); 424 425 /* adjust the output delay for SD mode */ 426 pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492); 427 428 /* Set the output voltage setting of Aux 1.2v LDO */ 429 ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32); 430 if (ret) 431 return; 432 scratch_32 &= ~(3 << 12); 433 pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32); 434 435 /* Set Max power supply capability of SD host */ 436 ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32); 437 if (ret) 438 return; 439 scratch_32 &= ~(0x01FE); 440 scratch_32 |= 0x00CC; 441 pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32); 442 /* Set DLL Tuning Window */ 443 ret = pci_read_config_dword(chip->pdev, 444 O2_SD_TUNING_CTRL, &scratch_32); 445 if (ret) 446 return; 447 scratch_32 &= ~(0x000000FF); 448 scratch_32 |= 0x00000066; 449 pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32); 450 451 /* Set UHS2 T_EIDLE */ 452 ret = pci_read_config_dword(chip->pdev, 453 O2_SD_UHS2_L1_CTRL, &scratch_32); 454 if (ret) 455 return; 456 scratch_32 &= ~(0x000000FC); 457 scratch_32 |= 0x00000084; 458 pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32); 459 460 /* Set UHS2 Termination */ 461 ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32); 462 if (ret) 463 return; 464 scratch_32 &= ~((1 << 21) | (1 << 30)); 465 466 pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32); 467 468 /* Set L1 Entrance Timer */ 469 ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32); 470 if (ret) 471 return; 472 scratch_32 &= ~(0xf0000000); 473 scratch_32 |= 0x30000000; 474 pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32); 475 476 ret = pci_read_config_dword(chip->pdev, 477 O2_SD_MISC_CTRL4, &scratch_32); 478 if (ret) 479 return; 480 scratch_32 &= ~(0x000f0000); 481 scratch_32 |= 0x00080000; 482 pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32); 483 } 484 485 static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip, 486 struct sdhci_host *host) 487 { 488 int ret; 489 490 ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI); 491 if (!ret) { 492 pr_info("%s: unsupport msi, use INTx irq\n", 493 mmc_hostname(host->mmc)); 494 return; 495 } 496 497 ret = pci_alloc_irq_vectors(chip->pdev, 1, 1, 498 PCI_IRQ_MSI | PCI_IRQ_MSIX); 499 if (ret < 0) { 500 pr_err("%s: enable PCI MSI failed, err=%d\n", 501 mmc_hostname(host->mmc), ret); 502 return; 503 } 504 505 host->irq = pci_irq_vector(chip->pdev, 0); 506 } 507 508 static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk) 509 { 510 /* Enable internal clock */ 511 clk |= SDHCI_CLOCK_INT_EN; 512 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 513 514 sdhci_o2_enable_internal_clock(host); 515 if (sdhci_o2_get_cd(host->mmc)) { 516 clk |= SDHCI_CLOCK_CARD_EN; 517 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 518 } 519 } 520 521 static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) 522 { 523 u16 clk; 524 u8 scratch; 525 u32 scratch_32; 526 struct sdhci_pci_slot *slot = sdhci_priv(host); 527 struct sdhci_pci_chip *chip = slot->chip; 528 529 host->mmc->actual_clock = 0; 530 531 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); 532 533 if (clock == 0) 534 return; 535 536 if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) { 537 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); 538 539 scratch &= 0x7f; 540 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 541 542 pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32); 543 544 if ((scratch_32 & 0xFFFF0000) != 0x2c280000) 545 o2_pci_set_baseclk(chip, 0x2c280000); 546 547 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); 548 549 scratch |= 0x80; 550 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 551 } 552 553 clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); 554 sdhci_o2_enable_clk(host, clk); 555 } 556 557 static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) 558 { 559 struct sdhci_pci_chip *chip; 560 struct sdhci_host *host; 561 struct o2_host *o2_host = sdhci_pci_priv(slot); 562 u32 reg, caps; 563 int ret; 564 565 chip = slot->chip; 566 host = slot->host; 567 568 o2_host->dll_adjust_count = 0; 569 caps = sdhci_readl(host, SDHCI_CAPABILITIES); 570 571 /* 572 * mmc_select_bus_width() will test the bus to determine the actual bus 573 * width. 574 */ 575 if (caps & SDHCI_CAN_DO_8BIT) 576 host->mmc->caps |= MMC_CAP_8_BIT_DATA; 577 578 switch (chip->pdev->device) { 579 case PCI_DEVICE_ID_O2_SDS0: 580 case PCI_DEVICE_ID_O2_SEABIRD0: 581 case PCI_DEVICE_ID_O2_SEABIRD1: 582 case PCI_DEVICE_ID_O2_SDS1: 583 case PCI_DEVICE_ID_O2_FUJIN2: 584 reg = sdhci_readl(host, O2_SD_VENDOR_SETTING); 585 if (reg & 0x1) 586 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; 587 588 sdhci_pci_o2_enable_msi(chip, host); 589 590 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) { 591 ret = pci_read_config_dword(chip->pdev, 592 O2_SD_MISC_SETTING, ®); 593 if (ret) 594 return -EIO; 595 if (reg & (1 << 4)) { 596 pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n", 597 mmc_hostname(host->mmc)); 598 host->flags &= ~SDHCI_SIGNALING_330; 599 host->flags |= SDHCI_SIGNALING_180; 600 host->mmc->caps2 |= MMC_CAP2_NO_SD; 601 host->mmc->caps2 |= MMC_CAP2_NO_SDIO; 602 pci_write_config_dword(chip->pdev, 603 O2_SD_DETECT_SETTING, 3); 604 } 605 606 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; 607 } 608 609 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD1) { 610 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; 611 host->mmc->caps2 |= MMC_CAP2_NO_SDIO; 612 host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; 613 } 614 615 host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; 616 617 if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) 618 break; 619 /* set dll watch dog timer */ 620 reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2); 621 reg |= (1 << 12); 622 sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2); 623 624 break; 625 default: 626 break; 627 } 628 629 return 0; 630 } 631 632 static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) 633 { 634 int ret; 635 u8 scratch; 636 u32 scratch_32; 637 638 switch (chip->pdev->device) { 639 case PCI_DEVICE_ID_O2_8220: 640 case PCI_DEVICE_ID_O2_8221: 641 case PCI_DEVICE_ID_O2_8320: 642 case PCI_DEVICE_ID_O2_8321: 643 /* This extra setup is required due to broken ADMA. */ 644 ret = pci_read_config_byte(chip->pdev, 645 O2_SD_LOCK_WP, &scratch); 646 if (ret) 647 return ret; 648 scratch &= 0x7f; 649 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 650 651 /* Set Multi 3 to VCC3V# */ 652 pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08); 653 654 /* Disable CLK_REQ# support after media DET */ 655 ret = pci_read_config_byte(chip->pdev, 656 O2_SD_CLKREQ, &scratch); 657 if (ret) 658 return ret; 659 scratch |= 0x20; 660 pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch); 661 662 /* Choose capabilities, enable SDMA. We have to write 0x01 663 * to the capabilities register first to unlock it. 664 */ 665 ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch); 666 if (ret) 667 return ret; 668 scratch |= 0x01; 669 pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch); 670 pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73); 671 672 /* Disable ADMA1/2 */ 673 pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39); 674 pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08); 675 676 /* Disable the infinite transfer mode */ 677 ret = pci_read_config_byte(chip->pdev, 678 O2_SD_INF_MOD, &scratch); 679 if (ret) 680 return ret; 681 scratch |= 0x08; 682 pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch); 683 684 /* Lock WP */ 685 ret = pci_read_config_byte(chip->pdev, 686 O2_SD_LOCK_WP, &scratch); 687 if (ret) 688 return ret; 689 scratch |= 0x80; 690 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 691 break; 692 case PCI_DEVICE_ID_O2_SDS0: 693 case PCI_DEVICE_ID_O2_SDS1: 694 case PCI_DEVICE_ID_O2_FUJIN2: 695 /* UnLock WP */ 696 ret = pci_read_config_byte(chip->pdev, 697 O2_SD_LOCK_WP, &scratch); 698 if (ret) 699 return ret; 700 701 scratch &= 0x7f; 702 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 703 704 /* DevId=8520 subId= 0x11 or 0x12 Type Chip support */ 705 if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) { 706 ret = pci_read_config_dword(chip->pdev, 707 O2_SD_FUNC_REG0, 708 &scratch_32); 709 if (ret) 710 return ret; 711 scratch_32 = ((scratch_32 & 0xFF000000) >> 24); 712 713 /* Check Whether subId is 0x11 or 0x12 */ 714 if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) { 715 scratch_32 = 0x25100000; 716 717 o2_pci_set_baseclk(chip, scratch_32); 718 ret = pci_read_config_dword(chip->pdev, 719 O2_SD_FUNC_REG4, 720 &scratch_32); 721 if (ret) 722 return ret; 723 724 /* Enable Base Clk setting change */ 725 scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET; 726 pci_write_config_dword(chip->pdev, 727 O2_SD_FUNC_REG4, 728 scratch_32); 729 730 /* Set Tuning Window to 4 */ 731 pci_write_config_byte(chip->pdev, 732 O2_SD_TUNING_CTRL, 0x44); 733 734 break; 735 } 736 } 737 738 /* Enable 8520 led function */ 739 o2_pci_led_enable(chip); 740 741 /* Set timeout CLK */ 742 ret = pci_read_config_dword(chip->pdev, 743 O2_SD_CLK_SETTING, &scratch_32); 744 if (ret) 745 return ret; 746 747 scratch_32 &= ~(0xFF00); 748 scratch_32 |= 0x07E0C800; 749 pci_write_config_dword(chip->pdev, 750 O2_SD_CLK_SETTING, scratch_32); 751 752 ret = pci_read_config_dword(chip->pdev, 753 O2_SD_CLKREQ, &scratch_32); 754 if (ret) 755 return ret; 756 scratch_32 |= 0x3; 757 pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32); 758 759 ret = pci_read_config_dword(chip->pdev, 760 O2_SD_PLL_SETTING, &scratch_32); 761 if (ret) 762 return ret; 763 764 scratch_32 &= ~(0x1F3F070E); 765 scratch_32 |= 0x18270106; 766 pci_write_config_dword(chip->pdev, 767 O2_SD_PLL_SETTING, scratch_32); 768 769 /* Disable UHS1 funciton */ 770 ret = pci_read_config_dword(chip->pdev, 771 O2_SD_CAP_REG2, &scratch_32); 772 if (ret) 773 return ret; 774 scratch_32 &= ~(0xE0); 775 pci_write_config_dword(chip->pdev, 776 O2_SD_CAP_REG2, scratch_32); 777 778 if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) 779 sdhci_pci_o2_fujin2_pci_init(chip); 780 781 /* Lock WP */ 782 ret = pci_read_config_byte(chip->pdev, 783 O2_SD_LOCK_WP, &scratch); 784 if (ret) 785 return ret; 786 scratch |= 0x80; 787 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 788 break; 789 case PCI_DEVICE_ID_O2_SEABIRD0: 790 case PCI_DEVICE_ID_O2_SEABIRD1: 791 /* UnLock WP */ 792 ret = pci_read_config_byte(chip->pdev, 793 O2_SD_LOCK_WP, &scratch); 794 if (ret) 795 return ret; 796 797 scratch &= 0x7f; 798 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 799 800 ret = pci_read_config_dword(chip->pdev, 801 O2_SD_PLL_SETTING, &scratch_32); 802 if (ret) 803 return ret; 804 805 if ((scratch_32 & 0xff000000) == 0x01000000) { 806 scratch_32 &= 0x0000FFFF; 807 scratch_32 |= 0x1F340000; 808 809 pci_write_config_dword(chip->pdev, 810 O2_SD_PLL_SETTING, scratch_32); 811 } else { 812 scratch_32 &= 0x0000FFFF; 813 scratch_32 |= 0x25100000; 814 815 pci_write_config_dword(chip->pdev, 816 O2_SD_PLL_SETTING, scratch_32); 817 818 ret = pci_read_config_dword(chip->pdev, 819 O2_SD_FUNC_REG4, 820 &scratch_32); 821 if (ret) 822 return ret; 823 scratch_32 |= (1 << 22); 824 pci_write_config_dword(chip->pdev, 825 O2_SD_FUNC_REG4, scratch_32); 826 } 827 828 /* Set Tuning Windows to 5 */ 829 pci_write_config_byte(chip->pdev, 830 O2_SD_TUNING_CTRL, 0x55); 831 /* Lock WP */ 832 ret = pci_read_config_byte(chip->pdev, 833 O2_SD_LOCK_WP, &scratch); 834 if (ret) 835 return ret; 836 scratch |= 0x80; 837 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); 838 break; 839 } 840 841 return 0; 842 } 843 844 #ifdef CONFIG_PM_SLEEP 845 static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip) 846 { 847 sdhci_pci_o2_probe(chip); 848 return sdhci_pci_resume_host(chip); 849 } 850 #endif 851 852 static const struct sdhci_ops sdhci_pci_o2_ops = { 853 .set_clock = sdhci_pci_o2_set_clock, 854 .enable_dma = sdhci_pci_enable_dma, 855 .set_bus_width = sdhci_set_bus_width, 856 .reset = sdhci_reset, 857 .set_uhs_signaling = sdhci_set_uhs_signaling, 858 }; 859 860 const struct sdhci_pci_fixes sdhci_o2 = { 861 .probe = sdhci_pci_o2_probe, 862 .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, 863 .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD, 864 .probe_slot = sdhci_pci_o2_probe_slot, 865 #ifdef CONFIG_PM_SLEEP 866 .resume = sdhci_pci_o2_resume, 867 #endif 868 .ops = &sdhci_pci_o2_ops, 869 .priv_size = sizeof(struct o2_host), 870 }; 871