1 /* 2 * 3 * Copyright (c) 2011, The Linux Foundation. All rights reserved. 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License version 2 and 7 * only version 2 as published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 */ 15 #include <linux/of.h> 16 #include <linux/of_dma.h> 17 #include <linux/bitops.h> 18 #include <linux/mmc/host.h> 19 #include <linux/mmc/card.h> 20 #include "mmci.h" 21 22 /* Registers */ 23 #define DML_CONFIG 0x00 24 #define PRODUCER_CRCI_MSK GENMASK(1, 0) 25 #define PRODUCER_CRCI_DISABLE 0 26 #define PRODUCER_CRCI_X_SEL BIT(0) 27 #define PRODUCER_CRCI_Y_SEL BIT(1) 28 #define CONSUMER_CRCI_MSK GENMASK(3, 2) 29 #define CONSUMER_CRCI_DISABLE 0 30 #define CONSUMER_CRCI_X_SEL BIT(2) 31 #define CONSUMER_CRCI_Y_SEL BIT(3) 32 #define PRODUCER_TRANS_END_EN BIT(4) 33 #define BYPASS BIT(16) 34 #define DIRECT_MODE BIT(17) 35 #define INFINITE_CONS_TRANS BIT(18) 36 37 #define DML_SW_RESET 0x08 38 #define DML_PRODUCER_START 0x0c 39 #define DML_CONSUMER_START 0x10 40 #define DML_PRODUCER_PIPE_LOGICAL_SIZE 0x14 41 #define DML_CONSUMER_PIPE_LOGICAL_SIZE 0x18 42 #define DML_PIPE_ID 0x1c 43 #define PRODUCER_PIPE_ID_SHFT 0 44 #define PRODUCER_PIPE_ID_MSK GENMASK(4, 0) 45 #define CONSUMER_PIPE_ID_SHFT 16 46 #define CONSUMER_PIPE_ID_MSK GENMASK(20, 16) 47 48 #define DML_PRODUCER_BAM_BLOCK_SIZE 0x24 49 #define DML_PRODUCER_BAM_TRANS_SIZE 0x28 50 51 /* other definitions */ 52 #define PRODUCER_PIPE_LOGICAL_SIZE 4096 53 #define CONSUMER_PIPE_LOGICAL_SIZE 4096 54 55 #define DML_OFFSET 0x800 56 57 void dml_start_xfer(struct mmci_host *host, struct mmc_data *data) 58 { 59 u32 config; 60 void __iomem *base = host->base + DML_OFFSET; 61 62 if (data->flags & MMC_DATA_READ) { 63 /* Read operation: configure DML for producer operation */ 64 /* Set producer CRCI-x and disable consumer CRCI */ 65 config = readl_relaxed(base + DML_CONFIG); 66 config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_X_SEL; 67 config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_DISABLE; 68 writel_relaxed(config, base + DML_CONFIG); 69 70 /* Set the Producer BAM block size */ 71 writel_relaxed(data->blksz, base + DML_PRODUCER_BAM_BLOCK_SIZE); 72 73 /* Set Producer BAM Transaction size */ 74 writel_relaxed(data->blocks * data->blksz, 75 base + DML_PRODUCER_BAM_TRANS_SIZE); 76 /* Set Producer Transaction End bit */ 77 config = readl_relaxed(base + DML_CONFIG); 78 config |= PRODUCER_TRANS_END_EN; 79 writel_relaxed(config, base + DML_CONFIG); 80 /* Trigger producer */ 81 writel_relaxed(1, base + DML_PRODUCER_START); 82 } else { 83 /* Write operation: configure DML for consumer operation */ 84 /* Set consumer CRCI-x and disable producer CRCI*/ 85 config = readl_relaxed(base + DML_CONFIG); 86 config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_X_SEL; 87 config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_DISABLE; 88 writel_relaxed(config, base + DML_CONFIG); 89 /* Clear Producer Transaction End bit */ 90 config = readl_relaxed(base + DML_CONFIG); 91 config &= ~PRODUCER_TRANS_END_EN; 92 writel_relaxed(config, base + DML_CONFIG); 93 /* Trigger consumer */ 94 writel_relaxed(1, base + DML_CONSUMER_START); 95 } 96 97 /* make sure the dml is configured before dma is triggered */ 98 wmb(); 99 } 100 101 static int of_get_dml_pipe_index(struct device_node *np, const char *name) 102 { 103 int index; 104 struct of_phandle_args dma_spec; 105 106 index = of_property_match_string(np, "dma-names", name); 107 108 if (index < 0) 109 return -ENODEV; 110 111 if (of_parse_phandle_with_args(np, "dmas", "#dma-cells", index, 112 &dma_spec)) 113 return -ENODEV; 114 115 if (dma_spec.args_count) 116 return dma_spec.args[0]; 117 118 return -ENODEV; 119 } 120 121 /* Initialize the dml hardware connected to SD Card controller */ 122 int dml_hw_init(struct mmci_host *host, struct device_node *np) 123 { 124 u32 config; 125 void __iomem *base; 126 int consumer_id, producer_id; 127 128 consumer_id = of_get_dml_pipe_index(np, "tx"); 129 producer_id = of_get_dml_pipe_index(np, "rx"); 130 131 if (producer_id < 0 || consumer_id < 0) 132 return -ENODEV; 133 134 base = host->base + DML_OFFSET; 135 136 /* Reset the DML block */ 137 writel_relaxed(1, base + DML_SW_RESET); 138 139 /* Disable the producer and consumer CRCI */ 140 config = (PRODUCER_CRCI_DISABLE | CONSUMER_CRCI_DISABLE); 141 /* 142 * Disable the bypass mode. Bypass mode will only be used 143 * if data transfer is to happen in PIO mode and don't 144 * want the BAM interface to connect with SDCC-DML. 145 */ 146 config &= ~BYPASS; 147 /* 148 * Disable direct mode as we don't DML to MASTER the AHB bus. 149 * BAM connected with DML should MASTER the AHB bus. 150 */ 151 config &= ~DIRECT_MODE; 152 /* 153 * Disable infinite mode transfer as we won't be doing any 154 * infinite size data transfers. All data transfer will be 155 * of finite data size. 156 */ 157 config &= ~INFINITE_CONS_TRANS; 158 writel_relaxed(config, base + DML_CONFIG); 159 160 /* 161 * Initialize the logical BAM pipe size for producer 162 * and consumer. 163 */ 164 writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE, 165 base + DML_PRODUCER_PIPE_LOGICAL_SIZE); 166 writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE, 167 base + DML_CONSUMER_PIPE_LOGICAL_SIZE); 168 169 /* Initialize Producer/consumer pipe id */ 170 writel_relaxed(producer_id | (consumer_id << CONSUMER_PIPE_ID_SHFT), 171 base + DML_PIPE_ID); 172 173 /* Make sure dml intialization is finished */ 174 mb(); 175 176 return 0; 177 } 178