1 /* 2 * Copyright (c) 2013 Linaro Ltd. 3 * Copyright (c) 2013 Hisilicon Limited. 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 */ 10 11 #include <linux/bitops.h> 12 #include <linux/bitfield.h> 13 #include <linux/clk.h> 14 #include <linux/mfd/syscon.h> 15 #include <linux/mmc/host.h> 16 #include <linux/module.h> 17 #include <linux/of_address.h> 18 #include <linux/platform_device.h> 19 #include <linux/pm_runtime.h> 20 #include <linux/regmap.h> 21 #include <linux/regulator/consumer.h> 22 23 #include "dw_mmc.h" 24 #include "dw_mmc-pltfm.h" 25 26 /* 27 * hi6220 sd only support io voltage 1.8v and 3v 28 * Also need config AO_SCTRL_SEL18 accordingly 29 */ 30 #define AO_SCTRL_SEL18 BIT(10) 31 #define AO_SCTRL_CTRL3 0x40C 32 33 #define DWMMC_SDIO_ID 2 34 35 #define SOC_SCTRL_SCPERCTRL5 (0x314) 36 #define SDCARD_IO_SEL18 BIT(2) 37 38 #define SDCARD_RD_THRESHOLD (512) 39 40 #define GENCLK_DIV (7) 41 42 #define GPIO_CLK_ENABLE BIT(16) 43 #define GPIO_CLK_DIV_MASK GENMASK(11, 8) 44 #define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13) 45 #define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16) 46 #define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21) 47 #define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26) 48 49 #define TIMING_MODE 3 50 #define TIMING_CFG_NUM 10 51 52 #define NUM_PHASES (40) 53 54 #define ENABLE_SHIFT_MIN_SMPL (4) 55 #define ENABLE_SHIFT_MAX_SMPL (12) 56 #define USE_DLY_MIN_SMPL (11) 57 #define USE_DLY_MAX_SMPL (14) 58 59 struct k3_priv { 60 int ctrl_id; 61 u32 cur_speed; 62 struct regmap *reg; 63 }; 64 65 static unsigned long dw_mci_hi6220_caps[] = { 66 MMC_CAP_CMD23, 67 MMC_CAP_CMD23, 68 0 69 }; 70 71 struct hs_timing { 72 u32 drv_phase; 73 u32 smpl_dly; 74 u32 smpl_phase_max; 75 u32 smpl_phase_min; 76 }; 77 78 struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = { 79 { /* reserved */ }, 80 { /* SD */ 81 {7, 0, 15, 15,}, /* 0: LEGACY 400k */ 82 {6, 0, 4, 4,}, /* 1: MMC_HS */ 83 {6, 0, 3, 3,}, /* 2: SD_HS */ 84 {6, 0, 15, 15,}, /* 3: SDR12 */ 85 {6, 0, 2, 2,}, /* 4: SDR25 */ 86 {4, 0, 11, 0,}, /* 5: SDR50 */ 87 {6, 4, 15, 0,}, /* 6: SDR104 */ 88 {0}, /* 7: DDR50 */ 89 {0}, /* 8: DDR52 */ 90 {0}, /* 9: HS200 */ 91 }, 92 { /* SDIO */ 93 {7, 0, 15, 15,}, /* 0: LEGACY 400k */ 94 {0}, /* 1: MMC_HS */ 95 {6, 0, 15, 15,}, /* 2: SD_HS */ 96 {6, 0, 15, 15,}, /* 3: SDR12 */ 97 {6, 0, 0, 0,}, /* 4: SDR25 */ 98 {4, 0, 12, 0,}, /* 5: SDR50 */ 99 {5, 4, 15, 0,}, /* 6: SDR104 */ 100 {0}, /* 7: DDR50 */ 101 {0}, /* 8: DDR52 */ 102 {0}, /* 9: HS200 */ 103 } 104 }; 105 106 static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) 107 { 108 int ret; 109 110 ret = clk_set_rate(host->ciu_clk, ios->clock); 111 if (ret) 112 dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock); 113 114 host->bus_hz = clk_get_rate(host->ciu_clk); 115 } 116 117 static const struct dw_mci_drv_data k3_drv_data = { 118 .set_ios = dw_mci_k3_set_ios, 119 }; 120 121 static int dw_mci_hi6220_parse_dt(struct dw_mci *host) 122 { 123 struct k3_priv *priv; 124 125 priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); 126 if (!priv) 127 return -ENOMEM; 128 129 priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node, 130 "hisilicon,peripheral-syscon"); 131 if (IS_ERR(priv->reg)) 132 priv->reg = NULL; 133 134 priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); 135 if (priv->ctrl_id < 0) 136 priv->ctrl_id = 0; 137 138 host->priv = priv; 139 return 0; 140 } 141 142 static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) 143 { 144 struct dw_mci_slot *slot = mmc_priv(mmc); 145 struct k3_priv *priv; 146 struct dw_mci *host; 147 int min_uv, max_uv; 148 int ret; 149 150 host = slot->host; 151 priv = host->priv; 152 153 if (!priv || !priv->reg) 154 return 0; 155 156 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { 157 ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3, 158 AO_SCTRL_SEL18, 0); 159 min_uv = 3000000; 160 max_uv = 3000000; 161 } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { 162 ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3, 163 AO_SCTRL_SEL18, AO_SCTRL_SEL18); 164 min_uv = 1800000; 165 max_uv = 1800000; 166 } else { 167 dev_dbg(host->dev, "voltage not supported\n"); 168 return -EINVAL; 169 } 170 171 if (ret) { 172 dev_dbg(host->dev, "switch voltage failed\n"); 173 return ret; 174 } 175 176 if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) 177 return 0; 178 179 ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv); 180 if (ret) { 181 dev_dbg(host->dev, "Regulator set error %d: %d - %d\n", 182 ret, min_uv, max_uv); 183 return ret; 184 } 185 186 return 0; 187 } 188 189 static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios) 190 { 191 int ret; 192 unsigned int clock; 193 194 clock = (ios->clock <= 25000000) ? 25000000 : ios->clock; 195 196 ret = clk_set_rate(host->biu_clk, clock); 197 if (ret) 198 dev_warn(host->dev, "failed to set rate %uHz\n", clock); 199 200 host->bus_hz = clk_get_rate(host->biu_clk); 201 } 202 203 static int dw_mci_hi6220_execute_tuning(struct dw_mci_slot *slot, u32 opcode) 204 { 205 return 0; 206 } 207 208 static const struct dw_mci_drv_data hi6220_data = { 209 .caps = dw_mci_hi6220_caps, 210 .switch_voltage = dw_mci_hi6220_switch_voltage, 211 .set_ios = dw_mci_hi6220_set_ios, 212 .parse_dt = dw_mci_hi6220_parse_dt, 213 .execute_tuning = dw_mci_hi6220_execute_tuning, 214 }; 215 216 static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, 217 int smpl_phase) 218 { 219 u32 drv_phase; 220 u32 smpl_dly; 221 u32 use_smpl_dly = 0; 222 u32 enable_shift = 0; 223 u32 reg_value; 224 int ctrl_id; 225 struct k3_priv *priv; 226 227 priv = host->priv; 228 ctrl_id = priv->ctrl_id; 229 230 drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase; 231 smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly; 232 if (smpl_phase == -1) 233 smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max + 234 hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2; 235 236 switch (timing) { 237 case MMC_TIMING_UHS_SDR104: 238 if (smpl_phase >= USE_DLY_MIN_SMPL && 239 smpl_phase <= USE_DLY_MAX_SMPL) 240 use_smpl_dly = 1; 241 /* fallthrough */ 242 case MMC_TIMING_UHS_SDR50: 243 if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL && 244 smpl_phase <= ENABLE_SHIFT_MAX_SMPL) 245 enable_shift = 1; 246 break; 247 } 248 249 mci_writel(host, GPIO, 0x0); 250 usleep_range(5, 10); 251 252 reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) | 253 FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) | 254 FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase); 255 mci_writel(host, UHS_REG_EXT, reg_value); 256 257 mci_writel(host, ENABLE_SHIFT, enable_shift); 258 259 reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) | 260 FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly); 261 mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE); 262 263 /* We should delay 1ms wait for timing setting finished. */ 264 usleep_range(1000, 2000); 265 } 266 267 static int dw_mci_hi3660_init(struct dw_mci *host) 268 { 269 mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD, 270 SDMMC_CARD_RD_THR_EN)); 271 272 dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1); 273 host->bus_hz /= (GENCLK_DIV + 1); 274 275 return 0; 276 } 277 278 static int dw_mci_set_sel18(struct dw_mci *host, bool set) 279 { 280 int ret; 281 unsigned int val; 282 struct k3_priv *priv; 283 284 priv = host->priv; 285 286 val = set ? SDCARD_IO_SEL18 : 0; 287 ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5, 288 SDCARD_IO_SEL18, val); 289 if (ret) { 290 dev_err(host->dev, "sel18 %u error\n", val); 291 return ret; 292 } 293 294 return 0; 295 } 296 297 static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios) 298 { 299 int ret; 300 unsigned long wanted; 301 unsigned long actual; 302 struct k3_priv *priv = host->priv; 303 304 if (!ios->clock || ios->clock == priv->cur_speed) 305 return; 306 307 wanted = ios->clock * (GENCLK_DIV + 1); 308 ret = clk_set_rate(host->ciu_clk, wanted); 309 if (ret) { 310 dev_err(host->dev, "failed to set rate %luHz\n", wanted); 311 return; 312 } 313 actual = clk_get_rate(host->ciu_clk); 314 315 dw_mci_hs_set_timing(host, ios->timing, -1); 316 host->bus_hz = actual / (GENCLK_DIV + 1); 317 host->current_speed = 0; 318 priv->cur_speed = host->bus_hz; 319 } 320 321 static int dw_mci_get_best_clksmpl(unsigned int sample_flag) 322 { 323 int i; 324 int interval; 325 unsigned int v; 326 unsigned int len; 327 unsigned int range_start = 0; 328 unsigned int range_length = 0; 329 unsigned int middle_range = 0; 330 331 if (!sample_flag) 332 return -EIO; 333 334 if (~sample_flag == 0) 335 return 0; 336 337 i = ffs(sample_flag) - 1; 338 339 /* 340 * A clock cycle is divided into 32 phases, 341 * each of which is represented by a bit, 342 * finding the optimal phase. 343 */ 344 while (i < 32) { 345 v = ror32(sample_flag, i); 346 len = ffs(~v) - 1; 347 348 if (len > range_length) { 349 range_length = len; 350 range_start = i; 351 } 352 353 interval = ffs(v >> len) - 1; 354 if (interval < 0) 355 break; 356 357 i += len + interval; 358 } 359 360 middle_range = range_start + range_length / 2; 361 if (middle_range >= 32) 362 middle_range %= 32; 363 364 return middle_range; 365 } 366 367 static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode) 368 { 369 int i = 0; 370 struct dw_mci *host = slot->host; 371 struct mmc_host *mmc = slot->mmc; 372 int smpl_phase = 0; 373 u32 tuning_sample_flag = 0; 374 int best_clksmpl = 0; 375 376 for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) { 377 smpl_phase %= 32; 378 379 mci_writel(host, TMOUT, ~0); 380 dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase); 381 382 if (!mmc_send_tuning(mmc, opcode, NULL)) 383 tuning_sample_flag |= (1 << smpl_phase); 384 else 385 tuning_sample_flag &= ~(1 << smpl_phase); 386 } 387 388 best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag); 389 if (best_clksmpl < 0) { 390 dev_err(host->dev, "All phases bad!\n"); 391 return -EIO; 392 } 393 394 dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl); 395 396 dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n", 397 best_clksmpl, tuning_sample_flag); 398 return 0; 399 } 400 401 static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc, 402 struct mmc_ios *ios) 403 { 404 int ret = 0; 405 struct dw_mci_slot *slot = mmc_priv(mmc); 406 struct k3_priv *priv; 407 struct dw_mci *host; 408 409 host = slot->host; 410 priv = host->priv; 411 412 if (!priv || !priv->reg) 413 return 0; 414 415 if (priv->ctrl_id == DWMMC_SDIO_ID) 416 return 0; 417 418 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) 419 ret = dw_mci_set_sel18(host, 0); 420 else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) 421 ret = dw_mci_set_sel18(host, 1); 422 if (ret) 423 return ret; 424 425 if (!IS_ERR(mmc->supply.vqmmc)) { 426 ret = mmc_regulator_set_vqmmc(mmc, ios); 427 if (ret) { 428 dev_err(host->dev, "Regulator set error %d\n", ret); 429 return ret; 430 } 431 } 432 433 return 0; 434 } 435 436 static const struct dw_mci_drv_data hi3660_data = { 437 .init = dw_mci_hi3660_init, 438 .set_ios = dw_mci_hi3660_set_ios, 439 .parse_dt = dw_mci_hi6220_parse_dt, 440 .execute_tuning = dw_mci_hi3660_execute_tuning, 441 .switch_voltage = dw_mci_hi3660_switch_voltage, 442 }; 443 444 static const struct of_device_id dw_mci_k3_match[] = { 445 { .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, }, 446 { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, 447 { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, }, 448 {}, 449 }; 450 MODULE_DEVICE_TABLE(of, dw_mci_k3_match); 451 452 static int dw_mci_k3_probe(struct platform_device *pdev) 453 { 454 const struct dw_mci_drv_data *drv_data; 455 const struct of_device_id *match; 456 457 match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); 458 drv_data = match->data; 459 460 return dw_mci_pltfm_register(pdev, drv_data); 461 } 462 463 static const struct dev_pm_ops dw_mci_k3_dev_pm_ops = { 464 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, 465 pm_runtime_force_resume) 466 SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend, 467 dw_mci_runtime_resume, 468 NULL) 469 }; 470 471 static struct platform_driver dw_mci_k3_pltfm_driver = { 472 .probe = dw_mci_k3_probe, 473 .remove = dw_mci_pltfm_remove, 474 .driver = { 475 .name = "dwmmc_k3", 476 .of_match_table = dw_mci_k3_match, 477 .pm = &dw_mci_k3_dev_pm_ops, 478 }, 479 }; 480 481 module_platform_driver(dw_mci_k3_pltfm_driver); 482 483 MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension"); 484 MODULE_LICENSE("GPL v2"); 485 MODULE_ALIAS("platform:dwmmc_k3"); 486