xref: /linux/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_otpe2p.c (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2022-2023 Microchip Technology Inc.
3 // PCI1xxxx OTP/EEPROM driver
4 
5 #include <linux/auxiliary_bus.h>
6 #include <linux/device.h>
7 #include <linux/iopoll.h>
8 #include <linux/module.h>
9 #include <linux/nvmem-provider.h>
10 
11 #include "mchp_pci1xxxx_gp.h"
12 
13 #define AUX_DRIVER_NAME			"PCI1xxxxOTPE2P"
14 #define EEPROM_NAME			"pci1xxxx_eeprom"
15 #define OTP_NAME			"pci1xxxx_otp"
16 
17 #define PERI_PF3_SYSTEM_REG_ADDR_BASE	0x2000
18 #define PERI_PF3_SYSTEM_REG_LENGTH	0x4000
19 
20 #define EEPROM_SIZE_BYTES		8192
21 #define OTP_SIZE_BYTES			8192
22 
23 #define CONFIG_REG_ADDR_BASE		0
24 #define EEPROM_REG_ADDR_BASE		0x0E00
25 #define OTP_REG_ADDR_BASE		0x1000
26 
27 #define MMAP_OTP_OFFSET(x)		(OTP_REG_ADDR_BASE + (x))
28 #define MMAP_EEPROM_OFFSET(x)		(EEPROM_REG_ADDR_BASE + (x))
29 #define MMAP_CFG_OFFSET(x)		(CONFIG_REG_ADDR_BASE + (x))
30 
31 #define EEPROM_CMD_REG			0x00
32 #define EEPROM_DATA_REG			0x04
33 
34 #define EEPROM_CMD_EPC_WRITE		(BIT(29) | BIT(28))
35 #define EEPROM_CMD_EPC_TIMEOUT_BIT	BIT(17)
36 #define EEPROM_CMD_EPC_BUSY_BIT		BIT(31)
37 
38 #define STATUS_READ_DELAY_US		1
39 #define STATUS_READ_TIMEOUT_US		20000
40 
41 #define OTP_ADDR_HIGH_OFFSET		0x04
42 #define OTP_ADDR_LOW_OFFSET		0x08
43 #define OTP_PRGM_DATA_OFFSET		0x10
44 #define OTP_PRGM_MODE_OFFSET		0x14
45 #define OTP_RD_DATA_OFFSET		0x18
46 #define OTP_FUNC_CMD_OFFSET		0x20
47 #define OTP_CMD_GO_OFFSET		0x28
48 #define OTP_PASS_FAIL_OFFSET		0x2C
49 #define OTP_STATUS_OFFSET		0x30
50 
51 #define OTP_FUNC_RD_BIT			BIT(0)
52 #define OTP_FUNC_PGM_BIT		BIT(1)
53 #define OTP_CMD_GO_BIT			BIT(0)
54 #define OTP_STATUS_BUSY_BIT		BIT(0)
55 #define OTP_PGM_MODE_BYTE_BIT		BIT(0)
56 #define OTP_FAIL_BIT			BIT(0)
57 
58 #define OTP_PWR_DN_BIT			BIT(0)
59 #define OTP_PWR_DN_OFFSET		0x00
60 
61 #define CFG_SYS_LOCK_OFFSET		0xA0
62 #define CFG_SYS_LOCK_PF3		BIT(5)
63 
64 #define BYTE_LOW			(GENMASK(7, 0))
65 #define BYTE_HIGH			(GENMASK(12, 8))
66 
67 struct pci1xxxx_otp_eeprom_device {
68 	struct auxiliary_device *pdev;
69 	void __iomem *reg_base;
70 	struct nvmem_config nvmem_config_eeprom;
71 	struct nvmem_device *nvmem_eeprom;
72 	struct nvmem_config nvmem_config_otp;
73 	struct nvmem_device *nvmem_otp;
74 };
75 
76 static int set_sys_lock(struct pci1xxxx_otp_eeprom_device *priv)
77 {
78 	void __iomem *sys_lock = priv->reg_base +
79 				 MMAP_CFG_OFFSET(CFG_SYS_LOCK_OFFSET);
80 	u8 data;
81 
82 	writel(CFG_SYS_LOCK_PF3, sys_lock);
83 	data = readl(sys_lock);
84 	if (data != CFG_SYS_LOCK_PF3)
85 		return -EPERM;
86 
87 	return 0;
88 }
89 
90 static void release_sys_lock(struct pci1xxxx_otp_eeprom_device *priv)
91 {
92 	void __iomem *sys_lock = priv->reg_base +
93 				 MMAP_CFG_OFFSET(CFG_SYS_LOCK_OFFSET);
94 	writel(0, sys_lock);
95 }
96 
97 static bool is_eeprom_responsive(struct pci1xxxx_otp_eeprom_device *priv)
98 {
99 	void __iomem *rb = priv->reg_base;
100 	u32 regval;
101 	int ret;
102 
103 	writel(EEPROM_CMD_EPC_TIMEOUT_BIT,
104 	       rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
105 	writel(EEPROM_CMD_EPC_BUSY_BIT,
106 	       rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
107 
108 	/* Wait for the EPC_BUSY bit to get cleared or timeout bit to get set*/
109 	ret = read_poll_timeout(readl, regval, !(regval & EEPROM_CMD_EPC_BUSY_BIT),
110 				STATUS_READ_DELAY_US, STATUS_READ_TIMEOUT_US,
111 				true, rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
112 
113 	/* Return failure if either of software or hardware timeouts happen */
114 	if (ret < 0 || (!ret && (regval & EEPROM_CMD_EPC_TIMEOUT_BIT)))
115 		return false;
116 
117 	return true;
118 }
119 
120 static int pci1xxxx_eeprom_read(void *priv_t, unsigned int off,
121 				void *buf_t, size_t count)
122 {
123 	struct pci1xxxx_otp_eeprom_device *priv = priv_t;
124 	void __iomem *rb = priv->reg_base;
125 	char *buf = buf_t;
126 	u32 regval;
127 	u32 byte;
128 	int ret;
129 
130 	if (off >= priv->nvmem_config_eeprom.size)
131 		return -EFAULT;
132 
133 	if ((off + count) > priv->nvmem_config_eeprom.size)
134 		count = priv->nvmem_config_eeprom.size - off;
135 
136 	ret = set_sys_lock(priv);
137 	if (ret)
138 		return ret;
139 
140 	for (byte = 0; byte < count; byte++) {
141 		writel(EEPROM_CMD_EPC_BUSY_BIT | (off + byte), rb +
142 		       MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
143 
144 		ret = read_poll_timeout(readl, regval,
145 					!(regval & EEPROM_CMD_EPC_BUSY_BIT),
146 					STATUS_READ_DELAY_US,
147 					STATUS_READ_TIMEOUT_US, true,
148 					rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
149 		if (ret < 0 || (!ret && (regval & EEPROM_CMD_EPC_TIMEOUT_BIT))) {
150 			ret = -EIO;
151 			goto error;
152 		}
153 
154 		buf[byte] = readl(rb + MMAP_EEPROM_OFFSET(EEPROM_DATA_REG));
155 	}
156 	ret = byte;
157 error:
158 	release_sys_lock(priv);
159 	return ret;
160 }
161 
162 static int pci1xxxx_eeprom_write(void *priv_t, unsigned int off,
163 				 void *value_t, size_t count)
164 {
165 	struct pci1xxxx_otp_eeprom_device *priv = priv_t;
166 	void __iomem *rb = priv->reg_base;
167 	char *value = value_t;
168 	u32 regval;
169 	u32 byte;
170 	int ret;
171 
172 	if (off >= priv->nvmem_config_eeprom.size)
173 		return -EFAULT;
174 
175 	if ((off + count) > priv->nvmem_config_eeprom.size)
176 		count = priv->nvmem_config_eeprom.size - off;
177 
178 	ret = set_sys_lock(priv);
179 	if (ret)
180 		return ret;
181 
182 	for (byte = 0; byte < count; byte++) {
183 		writel(*(value + byte), rb + MMAP_EEPROM_OFFSET(EEPROM_DATA_REG));
184 		regval = EEPROM_CMD_EPC_TIMEOUT_BIT | EEPROM_CMD_EPC_WRITE |
185 			 (off + byte);
186 		writel(regval, rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
187 		writel(EEPROM_CMD_EPC_BUSY_BIT | regval,
188 		       rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
189 
190 		ret = read_poll_timeout(readl, regval,
191 					!(regval & EEPROM_CMD_EPC_BUSY_BIT),
192 					STATUS_READ_DELAY_US,
193 					STATUS_READ_TIMEOUT_US, true,
194 					rb + MMAP_EEPROM_OFFSET(EEPROM_CMD_REG));
195 		if (ret < 0 || (!ret && (regval & EEPROM_CMD_EPC_TIMEOUT_BIT))) {
196 			ret = -EIO;
197 			goto error;
198 		}
199 	}
200 	ret = byte;
201 error:
202 	release_sys_lock(priv);
203 	return ret;
204 }
205 
206 static void otp_device_set_address(struct pci1xxxx_otp_eeprom_device *priv,
207 				   u16 address)
208 {
209 	u16 lo, hi;
210 
211 	lo = address & BYTE_LOW;
212 	hi = (address & BYTE_HIGH) >> 8;
213 	writew(lo, priv->reg_base + MMAP_OTP_OFFSET(OTP_ADDR_LOW_OFFSET));
214 	writew(hi, priv->reg_base + MMAP_OTP_OFFSET(OTP_ADDR_HIGH_OFFSET));
215 }
216 
217 static int pci1xxxx_otp_read(void *priv_t, unsigned int off,
218 			     void *buf_t, size_t count)
219 {
220 	struct pci1xxxx_otp_eeprom_device *priv = priv_t;
221 	void __iomem *rb = priv->reg_base;
222 	char *buf = buf_t;
223 	u32 regval;
224 	u32 byte;
225 	int ret;
226 	u8 data;
227 
228 	if (off >= priv->nvmem_config_otp.size)
229 		return -EFAULT;
230 
231 	if ((off + count) > priv->nvmem_config_otp.size)
232 		count = priv->nvmem_config_otp.size - off;
233 
234 	ret = set_sys_lock(priv);
235 	if (ret)
236 		return ret;
237 
238 	for (byte = 0; byte < count; byte++) {
239 		otp_device_set_address(priv, (u16)(off + byte));
240 		data = readl(rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
241 		writel(data | OTP_FUNC_RD_BIT,
242 		       rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
243 		data = readl(rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
244 		writel(data | OTP_CMD_GO_BIT,
245 		       rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
246 
247 		ret = read_poll_timeout(readl, regval,
248 					!(regval & OTP_STATUS_BUSY_BIT),
249 					STATUS_READ_DELAY_US,
250 					STATUS_READ_TIMEOUT_US, true,
251 					rb + MMAP_OTP_OFFSET(OTP_STATUS_OFFSET));
252 
253 		data = readl(rb + MMAP_OTP_OFFSET(OTP_PASS_FAIL_OFFSET));
254 		if (ret < 0 || data & OTP_FAIL_BIT) {
255 			ret = -EIO;
256 			goto error;
257 		}
258 
259 		buf[byte] = readl(rb + MMAP_OTP_OFFSET(OTP_RD_DATA_OFFSET));
260 	}
261 	ret = byte;
262 error:
263 	release_sys_lock(priv);
264 	return ret;
265 }
266 
267 static int pci1xxxx_otp_write(void *priv_t, unsigned int off,
268 			      void *value_t, size_t count)
269 {
270 	struct pci1xxxx_otp_eeprom_device *priv = priv_t;
271 	void __iomem *rb = priv->reg_base;
272 	char *value = value_t;
273 	u32 regval;
274 	u32 byte;
275 	int ret;
276 	u8 data;
277 
278 	if (off >= priv->nvmem_config_otp.size)
279 		return -EFAULT;
280 
281 	if ((off + count) > priv->nvmem_config_otp.size)
282 		count = priv->nvmem_config_otp.size - off;
283 
284 	ret = set_sys_lock(priv);
285 	if (ret)
286 		return ret;
287 
288 	for (byte = 0; byte < count; byte++) {
289 		otp_device_set_address(priv, (u16)(off + byte));
290 
291 		/*
292 		 * Set OTP_PGM_MODE_BYTE command bit in OTP_PRGM_MODE register
293 		 * to enable Byte programming
294 		 */
295 		data = readl(rb + MMAP_OTP_OFFSET(OTP_PRGM_MODE_OFFSET));
296 		writel(data | OTP_PGM_MODE_BYTE_BIT,
297 		       rb + MMAP_OTP_OFFSET(OTP_PRGM_MODE_OFFSET));
298 		writel(*(value + byte), rb + MMAP_OTP_OFFSET(OTP_PRGM_DATA_OFFSET));
299 		data = readl(rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
300 		writel(data | OTP_FUNC_PGM_BIT,
301 		       rb + MMAP_OTP_OFFSET(OTP_FUNC_CMD_OFFSET));
302 		data = readl(rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
303 		writel(data | OTP_CMD_GO_BIT,
304 		       rb + MMAP_OTP_OFFSET(OTP_CMD_GO_OFFSET));
305 
306 		ret = read_poll_timeout(readl, regval,
307 					!(regval & OTP_STATUS_BUSY_BIT),
308 					STATUS_READ_DELAY_US,
309 					STATUS_READ_TIMEOUT_US, true,
310 					rb + MMAP_OTP_OFFSET(OTP_STATUS_OFFSET));
311 
312 		data = readl(rb + MMAP_OTP_OFFSET(OTP_PASS_FAIL_OFFSET));
313 		if (ret < 0 || data & OTP_FAIL_BIT) {
314 			ret = -EIO;
315 			goto error;
316 		}
317 	}
318 	ret = byte;
319 error:
320 	release_sys_lock(priv);
321 	return ret;
322 }
323 
324 static int pci1xxxx_otp_eeprom_probe(struct auxiliary_device *aux_dev,
325 				     const struct auxiliary_device_id *id)
326 {
327 	struct auxiliary_device_wrapper *aux_dev_wrapper;
328 	struct pci1xxxx_otp_eeprom_device *priv;
329 	struct gp_aux_data_type *pdata;
330 	int ret;
331 	u8 data;
332 
333 	aux_dev_wrapper = container_of(aux_dev, struct auxiliary_device_wrapper,
334 				       aux_dev);
335 	pdata = &aux_dev_wrapper->gp_aux_data;
336 	if (!pdata)
337 		return -EINVAL;
338 
339 	priv = devm_kzalloc(&aux_dev->dev, sizeof(*priv), GFP_KERNEL);
340 	if (!priv)
341 		return -ENOMEM;
342 
343 	priv->pdev = aux_dev;
344 
345 	if (!devm_request_mem_region(&aux_dev->dev, pdata->region_start +
346 				     PERI_PF3_SYSTEM_REG_ADDR_BASE,
347 				     PERI_PF3_SYSTEM_REG_LENGTH,
348 				     aux_dev->name))
349 		return -ENOMEM;
350 
351 	priv->reg_base = devm_ioremap(&aux_dev->dev, pdata->region_start +
352 				      PERI_PF3_SYSTEM_REG_ADDR_BASE,
353 				      PERI_PF3_SYSTEM_REG_LENGTH);
354 	if (!priv->reg_base)
355 		return -ENOMEM;
356 
357 	ret = set_sys_lock(priv);
358 	if (ret)
359 		return ret;
360 
361 	/* Set OTP_PWR_DN to 0 to make OTP Operational */
362 	data = readl(priv->reg_base + MMAP_OTP_OFFSET(OTP_PWR_DN_OFFSET));
363 	writel(data & ~OTP_PWR_DN_BIT,
364 	       priv->reg_base + MMAP_OTP_OFFSET(OTP_PWR_DN_OFFSET));
365 
366 	dev_set_drvdata(&aux_dev->dev, priv);
367 
368 	if (is_eeprom_responsive(priv)) {
369 		priv->nvmem_config_eeprom.type = NVMEM_TYPE_EEPROM;
370 		priv->nvmem_config_eeprom.name = EEPROM_NAME;
371 		priv->nvmem_config_eeprom.dev = &aux_dev->dev;
372 		priv->nvmem_config_eeprom.owner = THIS_MODULE;
373 		priv->nvmem_config_eeprom.reg_read = pci1xxxx_eeprom_read;
374 		priv->nvmem_config_eeprom.reg_write = pci1xxxx_eeprom_write;
375 		priv->nvmem_config_eeprom.priv = priv;
376 		priv->nvmem_config_eeprom.stride = 1;
377 		priv->nvmem_config_eeprom.word_size = 1;
378 		priv->nvmem_config_eeprom.size = EEPROM_SIZE_BYTES;
379 
380 		priv->nvmem_eeprom = devm_nvmem_register(&aux_dev->dev,
381 							 &priv->nvmem_config_eeprom);
382 		if (IS_ERR(priv->nvmem_eeprom))
383 			return PTR_ERR(priv->nvmem_eeprom);
384 	}
385 
386 	release_sys_lock(priv);
387 
388 	priv->nvmem_config_otp.type = NVMEM_TYPE_OTP;
389 	priv->nvmem_config_otp.name = OTP_NAME;
390 	priv->nvmem_config_otp.dev = &aux_dev->dev;
391 	priv->nvmem_config_otp.owner = THIS_MODULE;
392 	priv->nvmem_config_otp.reg_read = pci1xxxx_otp_read;
393 	priv->nvmem_config_otp.reg_write = pci1xxxx_otp_write;
394 	priv->nvmem_config_otp.priv = priv;
395 	priv->nvmem_config_otp.stride = 1;
396 	priv->nvmem_config_otp.word_size = 1;
397 	priv->nvmem_config_otp.size = OTP_SIZE_BYTES;
398 
399 	priv->nvmem_otp = devm_nvmem_register(&aux_dev->dev,
400 					      &priv->nvmem_config_otp);
401 	if (IS_ERR(priv->nvmem_otp))
402 		return PTR_ERR(priv->nvmem_otp);
403 
404 	return ret;
405 }
406 
407 static void pci1xxxx_otp_eeprom_remove(struct auxiliary_device *aux_dev)
408 {
409 	struct pci1xxxx_otp_eeprom_device *priv;
410 	void __iomem *sys_lock;
411 
412 	priv = dev_get_drvdata(&aux_dev->dev);
413 	sys_lock = priv->reg_base + MMAP_CFG_OFFSET(CFG_SYS_LOCK_OFFSET);
414 	writel(CFG_SYS_LOCK_PF3, sys_lock);
415 
416 	/* Shut down OTP */
417 	writel(OTP_PWR_DN_BIT,
418 	       priv->reg_base + MMAP_OTP_OFFSET(OTP_PWR_DN_OFFSET));
419 
420 	writel(0, sys_lock);
421 }
422 
423 static const struct auxiliary_device_id pci1xxxx_otp_eeprom_auxiliary_id_table[] = {
424 	{.name = "mchp_pci1xxxx_gp.gp_otp_e2p"},
425 	{},
426 };
427 MODULE_DEVICE_TABLE(auxiliary, pci1xxxx_otp_eeprom_auxiliary_id_table);
428 
429 static struct auxiliary_driver pci1xxxx_otp_eeprom_driver = {
430 	.driver = {
431 		.name = AUX_DRIVER_NAME,
432 	},
433 	.probe = pci1xxxx_otp_eeprom_probe,
434 	.remove = pci1xxxx_otp_eeprom_remove,
435 	.id_table = pci1xxxx_otp_eeprom_auxiliary_id_table
436 };
437 module_auxiliary_driver(pci1xxxx_otp_eeprom_driver);
438 
439 MODULE_LICENSE("GPL");
440 MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
441 MODULE_AUTHOR("Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>");
442 MODULE_AUTHOR("Vaibhaav Ram T.L <vaibhaavram.tl@microchip.com>");
443 MODULE_DESCRIPTION("Microchip Technology Inc. PCI1xxxx OTP EEPROM Programmer");
444