1 /* 2 * lis3lv02d_spi - SPI glue layer for lis3lv02d 3 * 4 * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * publishhed by the Free Software Foundation. 9 */ 10 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/err.h> 14 #include <linux/input.h> 15 #include <linux/interrupt.h> 16 #include <linux/workqueue.h> 17 #include <linux/spi/spi.h> 18 #include <linux/pm.h> 19 #include <linux/of.h> 20 #include <linux/of_platform.h> 21 #include <linux/of_device.h> 22 23 #include "lis3lv02d.h" 24 25 #define DRV_NAME "lis3lv02d_spi" 26 #define LIS3_SPI_READ 0x80 27 28 static int lis3_spi_read(struct lis3lv02d *lis3, int reg, u8 *v) 29 { 30 struct spi_device *spi = lis3->bus_priv; 31 int ret = spi_w8r8(spi, reg | LIS3_SPI_READ); 32 if (ret < 0) 33 return -EINVAL; 34 35 *v = (u8) ret; 36 return 0; 37 } 38 39 static int lis3_spi_write(struct lis3lv02d *lis3, int reg, u8 val) 40 { 41 u8 tmp[2] = { reg, val }; 42 struct spi_device *spi = lis3->bus_priv; 43 return spi_write(spi, tmp, sizeof(tmp)); 44 } 45 46 static int lis3_spi_init(struct lis3lv02d *lis3) 47 { 48 u8 reg; 49 int ret; 50 51 /* power up the device */ 52 ret = lis3->read(lis3, CTRL_REG1, ®); 53 if (ret < 0) 54 return ret; 55 56 reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; 57 return lis3->write(lis3, CTRL_REG1, reg); 58 } 59 60 static union axis_conversion lis3lv02d_axis_normal = 61 { .as_array = { 1, 2, 3 } }; 62 63 #ifdef CONFIG_OF 64 static const struct of_device_id lis302dl_spi_dt_ids[] = { 65 { .compatible = "st,lis302dl-spi" }, 66 {} 67 }; 68 MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids); 69 #endif 70 71 static int lis302dl_spi_probe(struct spi_device *spi) 72 { 73 int ret; 74 75 spi->bits_per_word = 8; 76 spi->mode = SPI_MODE_0; 77 ret = spi_setup(spi); 78 if (ret < 0) 79 return ret; 80 81 lis3_dev.bus_priv = spi; 82 lis3_dev.init = lis3_spi_init; 83 lis3_dev.read = lis3_spi_read; 84 lis3_dev.write = lis3_spi_write; 85 lis3_dev.irq = spi->irq; 86 lis3_dev.ac = lis3lv02d_axis_normal; 87 lis3_dev.pdata = spi->dev.platform_data; 88 89 #ifdef CONFIG_OF 90 if (of_match_device(lis302dl_spi_dt_ids, &spi->dev)) { 91 lis3_dev.of_node = spi->dev.of_node; 92 ret = lis3lv02d_init_dt(&lis3_dev); 93 if (ret) 94 return ret; 95 } 96 #endif 97 spi_set_drvdata(spi, &lis3_dev); 98 99 return lis3lv02d_init_device(&lis3_dev); 100 } 101 102 static int lis302dl_spi_remove(struct spi_device *spi) 103 { 104 struct lis3lv02d *lis3 = spi_get_drvdata(spi); 105 lis3lv02d_joystick_disable(lis3); 106 lis3lv02d_poweroff(lis3); 107 108 return lis3lv02d_remove_fs(&lis3_dev); 109 } 110 111 #ifdef CONFIG_PM_SLEEP 112 static int lis3lv02d_spi_suspend(struct device *dev) 113 { 114 struct spi_device *spi = to_spi_device(dev); 115 struct lis3lv02d *lis3 = spi_get_drvdata(spi); 116 117 if (!lis3->pdata || !lis3->pdata->wakeup_flags) 118 lis3lv02d_poweroff(&lis3_dev); 119 120 return 0; 121 } 122 123 static int lis3lv02d_spi_resume(struct device *dev) 124 { 125 struct spi_device *spi = to_spi_device(dev); 126 struct lis3lv02d *lis3 = spi_get_drvdata(spi); 127 128 if (!lis3->pdata || !lis3->pdata->wakeup_flags) 129 lis3lv02d_poweron(lis3); 130 131 return 0; 132 } 133 #endif 134 135 static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend, 136 lis3lv02d_spi_resume); 137 138 static struct spi_driver lis302dl_spi_driver = { 139 .driver = { 140 .name = DRV_NAME, 141 .owner = THIS_MODULE, 142 .pm = &lis3lv02d_spi_pm, 143 .of_match_table = of_match_ptr(lis302dl_spi_dt_ids), 144 }, 145 .probe = lis302dl_spi_probe, 146 .remove = lis302dl_spi_remove, 147 }; 148 149 module_spi_driver(lis302dl_spi_driver); 150 151 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); 152 MODULE_DESCRIPTION("lis3lv02d SPI glue layer"); 153 MODULE_LICENSE("GPL"); 154 MODULE_ALIAS("spi:" DRV_NAME); 155