1 /* 2 * Copyright (C) 2012 Stefan Roese <sr@denx.de> 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License as published by 6 * the Free Software Foundation; either version 2 of the License, or 7 * (at your option) any later version. 8 */ 9 10 #include <linux/device.h> 11 #include <linux/firmware.h> 12 #include <linux/module.h> 13 #include <linux/errno.h> 14 #include <linux/kernel.h> 15 #include <linux/spi/spi.h> 16 #include <linux/platform_device.h> 17 #include <linux/delay.h> 18 #include <asm/unaligned.h> 19 20 #define FIRMWARE_NAME "lattice-ecp3.bit" 21 22 /* 23 * The JTAG ID's of the supported FPGA's. The ID is 32bit wide 24 * reversed as noted in the manual. 25 */ 26 #define ID_ECP3_17 0xc2088080 27 #define ID_ECP3_35 0xc2048080 28 29 /* FPGA commands */ 30 #define FPGA_CMD_READ_ID 0x07 /* plus 24 bits */ 31 #define FPGA_CMD_READ_STATUS 0x09 /* plus 24 bits */ 32 #define FPGA_CMD_CLEAR 0x70 33 #define FPGA_CMD_REFRESH 0x71 34 #define FPGA_CMD_WRITE_EN 0x4a /* plus 2 bits */ 35 #define FPGA_CMD_WRITE_DIS 0x4f /* plus 8 bits */ 36 #define FPGA_CMD_WRITE_INC 0x41 /* plus 0 bits */ 37 38 /* 39 * The status register is 32bit revered, DONE is bit 17 from the TN1222.pdf 40 * (LatticeECP3 Slave SPI Port User's Guide) 41 */ 42 #define FPGA_STATUS_DONE 0x00004000 43 #define FPGA_STATUS_CLEARED 0x00010000 44 45 #define FPGA_CLEAR_TIMEOUT 5000 /* max. 5000ms for FPGA clear */ 46 #define FPGA_CLEAR_MSLEEP 10 47 #define FPGA_CLEAR_LOOP_COUNT (FPGA_CLEAR_TIMEOUT / FPGA_CLEAR_MSLEEP) 48 49 struct fpga_data { 50 struct completion fw_loaded; 51 }; 52 53 struct ecp3_dev { 54 u32 jedec_id; 55 char *name; 56 }; 57 58 static const struct ecp3_dev ecp3_dev[] = { 59 { 60 .jedec_id = ID_ECP3_17, 61 .name = "Lattice ECP3-17", 62 }, 63 { 64 .jedec_id = ID_ECP3_35, 65 .name = "Lattice ECP3-35", 66 }, 67 }; 68 69 static void firmware_load(const struct firmware *fw, void *context) 70 { 71 struct spi_device *spi = (struct spi_device *)context; 72 struct fpga_data *data = spi_get_drvdata(spi); 73 u8 *buffer; 74 int ret; 75 u8 txbuf[8]; 76 u8 rxbuf[8]; 77 int rx_len = 8; 78 int i; 79 u32 jedec_id; 80 u32 status; 81 82 if (fw == NULL) { 83 dev_err(&spi->dev, "Cannot load firmware, aborting\n"); 84 return; 85 } 86 87 if (fw->size == 0) { 88 dev_err(&spi->dev, "Error: Firmware size is 0!\n"); 89 return; 90 } 91 92 /* Fill dummy data (24 stuffing bits for commands) */ 93 txbuf[1] = 0x00; 94 txbuf[2] = 0x00; 95 txbuf[3] = 0x00; 96 97 /* Trying to speak with the FPGA via SPI... */ 98 txbuf[0] = FPGA_CMD_READ_ID; 99 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 100 jedec_id = get_unaligned_be32(&rxbuf[4]); 101 dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id); 102 103 for (i = 0; i < ARRAY_SIZE(ecp3_dev); i++) { 104 if (jedec_id == ecp3_dev[i].jedec_id) 105 break; 106 } 107 if (i == ARRAY_SIZE(ecp3_dev)) { 108 dev_err(&spi->dev, 109 "Error: No supported FPGA detected (JEDEC_ID=%08x)!\n", 110 jedec_id); 111 return; 112 } 113 114 dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name); 115 116 txbuf[0] = FPGA_CMD_READ_STATUS; 117 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 118 status = get_unaligned_be32(&rxbuf[4]); 119 dev_dbg(&spi->dev, "FPGA Status=%08x\n", status); 120 121 buffer = kzalloc(fw->size + 8, GFP_KERNEL); 122 if (!buffer) { 123 dev_err(&spi->dev, "Error: Can't allocate memory!\n"); 124 return; 125 } 126 127 /* 128 * Insert WRITE_INC command into stream (one SPI frame) 129 */ 130 buffer[0] = FPGA_CMD_WRITE_INC; 131 buffer[1] = 0xff; 132 buffer[2] = 0xff; 133 buffer[3] = 0xff; 134 memcpy(buffer + 4, fw->data, fw->size); 135 136 txbuf[0] = FPGA_CMD_REFRESH; 137 ret = spi_write(spi, txbuf, 4); 138 139 txbuf[0] = FPGA_CMD_WRITE_EN; 140 ret = spi_write(spi, txbuf, 4); 141 142 txbuf[0] = FPGA_CMD_CLEAR; 143 ret = spi_write(spi, txbuf, 4); 144 145 /* 146 * Wait for FPGA memory to become cleared 147 */ 148 for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) { 149 txbuf[0] = FPGA_CMD_READ_STATUS; 150 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 151 status = get_unaligned_be32(&rxbuf[4]); 152 if (status == FPGA_STATUS_CLEARED) 153 break; 154 155 msleep(FPGA_CLEAR_MSLEEP); 156 } 157 158 if (i == FPGA_CLEAR_LOOP_COUNT) { 159 dev_err(&spi->dev, 160 "Error: Timeout waiting for FPGA to clear (status=%08x)!\n", 161 status); 162 kfree(buffer); 163 return; 164 } 165 166 dev_info(&spi->dev, "Configuring the FPGA...\n"); 167 ret = spi_write(spi, buffer, fw->size + 8); 168 169 txbuf[0] = FPGA_CMD_WRITE_DIS; 170 ret = spi_write(spi, txbuf, 4); 171 172 txbuf[0] = FPGA_CMD_READ_STATUS; 173 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 174 status = get_unaligned_be32(&rxbuf[4]); 175 dev_dbg(&spi->dev, "FPGA Status=%08x\n", status); 176 177 /* Check result */ 178 if (status & FPGA_STATUS_DONE) 179 dev_info(&spi->dev, "FPGA successfully configured!\n"); 180 else 181 dev_info(&spi->dev, "FPGA not configured (DONE not set)\n"); 182 183 /* 184 * Don't forget to release the firmware again 185 */ 186 release_firmware(fw); 187 188 kfree(buffer); 189 190 complete(&data->fw_loaded); 191 } 192 193 static int lattice_ecp3_probe(struct spi_device *spi) 194 { 195 struct fpga_data *data; 196 int err; 197 198 data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); 199 if (!data) { 200 dev_err(&spi->dev, "Memory allocation for fpga_data failed\n"); 201 return -ENOMEM; 202 } 203 spi_set_drvdata(spi, data); 204 205 init_completion(&data->fw_loaded); 206 err = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, 207 FIRMWARE_NAME, &spi->dev, 208 GFP_KERNEL, spi, firmware_load); 209 if (err) { 210 dev_err(&spi->dev, "Firmware loading failed with %d!\n", err); 211 return err; 212 } 213 214 dev_info(&spi->dev, "FPGA bitstream configuration driver registered\n"); 215 216 return 0; 217 } 218 219 static int lattice_ecp3_remove(struct spi_device *spi) 220 { 221 struct fpga_data *data = spi_get_drvdata(spi); 222 223 wait_for_completion(&data->fw_loaded); 224 225 return 0; 226 } 227 228 static const struct spi_device_id lattice_ecp3_id[] = { 229 { "ecp3-17", 0 }, 230 { "ecp3-35", 0 }, 231 { } 232 }; 233 MODULE_DEVICE_TABLE(spi, lattice_ecp3_id); 234 235 static struct spi_driver lattice_ecp3_driver = { 236 .driver = { 237 .name = "lattice-ecp3", 238 }, 239 .probe = lattice_ecp3_probe, 240 .remove = lattice_ecp3_remove, 241 .id_table = lattice_ecp3_id, 242 }; 243 244 module_spi_driver(lattice_ecp3_driver); 245 246 MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); 247 MODULE_DESCRIPTION("Lattice ECP3 FPGA configuration via SPI"); 248 MODULE_LICENSE("GPL"); 249 MODULE_FIRMWARE(FIRMWARE_NAME); 250