xref: /linux/drivers/misc/eeprom/Kconfig (revision 001ef5e4554b851cf50fe03bc4c266c28ed8e62d)
15195e509SWolfram Sangmenu "EEPROM support"
25195e509SWolfram Sang
3dd7f8dbeSJean Delvareconfig EEPROM_AT24
45195e509SWolfram Sang	tristate "I2C EEPROMs from most vendors"
5781b8a2aSWolfram Sang	depends on I2C && SYSFS
65195e509SWolfram Sang	help
75195e509SWolfram Sang	  Enable this driver to get read/write support to most I2C EEPROMs,
85195e509SWolfram Sang	  after you configure the driver to know about each EEPROM on
95195e509SWolfram Sang	  your target board.  Use these generic chip names, instead of
105195e509SWolfram Sang	  vendor-specific ones like at24c64 or 24lc02:
115195e509SWolfram Sang
125195e509SWolfram Sang	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
135195e509SWolfram Sang	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
145195e509SWolfram Sang
155195e509SWolfram Sang	  Unless you like data loss puzzles, always be sure that any chip
165195e509SWolfram Sang	  you configure as a 24c32 (32 kbit) or larger is NOT really a
175195e509SWolfram Sang	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
185195e509SWolfram Sang	  as read-only won't help recover from this. Also, if your chip
195195e509SWolfram Sang	  has any software write-protect mechanism you may want to review the
205195e509SWolfram Sang	  code to make sure this driver won't turn it on by accident.
215195e509SWolfram Sang
225195e509SWolfram Sang	  If you use this with an SMBus adapter instead of an I2C adapter,
235195e509SWolfram Sang	  full functionality is not available.  Only smaller devices are
245195e509SWolfram Sang	  supported (24c16 and below, max 4 kByte).
255195e509SWolfram Sang
265195e509SWolfram Sang	  This driver can also be built as a module.  If so, the module
275195e509SWolfram Sang	  will be called at24.
285195e509SWolfram Sang
29dd7f8dbeSJean Delvareconfig EEPROM_AT25
30e51d565fSWolfram Sang	tristate "SPI EEPROMs from most vendors"
31e51d565fSWolfram Sang	depends on SPI && SYSFS
32e51d565fSWolfram Sang	help
33e51d565fSWolfram Sang	  Enable this driver to get read/write support to most SPI EEPROMs,
34e51d565fSWolfram Sang	  after you configure the board init code to know about each eeprom
35e51d565fSWolfram Sang	  on your target board.
36e51d565fSWolfram Sang
37e51d565fSWolfram Sang	  This driver can also be built as a module.  If so, the module
38e51d565fSWolfram Sang	  will be called at25.
39e51d565fSWolfram Sang
40dd7f8dbeSJean Delvareconfig EEPROM_LEGACY
412e157888SWolfram Sang	tristate "Old I2C EEPROM reader"
42dd7f8dbeSJean Delvare	depends on I2C && SYSFS
432e157888SWolfram Sang	help
442e157888SWolfram Sang	  If you say yes here you get read-only access to the EEPROM data
452e157888SWolfram Sang	  available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
462e157888SWolfram Sang	  EEPROMs could theoretically be available on other devices as well.
472e157888SWolfram Sang
482e157888SWolfram Sang	  This driver can also be built as a module.  If so, the module
492e157888SWolfram Sang	  will be called eeprom.
502e157888SWolfram Sang
514b364f23SWolfram Sangconfig EEPROM_MAX6875
524b364f23SWolfram Sang	tristate "Maxim MAX6874/5 power supply supervisor"
534b364f23SWolfram Sang	depends on I2C && EXPERIMENTAL
544b364f23SWolfram Sang	help
554b364f23SWolfram Sang	  If you say yes here you get read-only support for the user EEPROM of
564b364f23SWolfram Sang	  the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
574b364f23SWolfram Sang	  sequencer/supervisor.
584b364f23SWolfram Sang
594b364f23SWolfram Sang	  All other features of this chip should be accessed via i2c-dev.
604b364f23SWolfram Sang
614b364f23SWolfram Sang	  This driver can also be built as a module.  If so, the module
624b364f23SWolfram Sang	  will be called max6875.
634b364f23SWolfram Sang
644b364f23SWolfram Sang
650eb6da20SWolfram Sangconfig EEPROM_93CX6
660eb6da20SWolfram Sang	tristate "EEPROM 93CX6 support"
670eb6da20SWolfram Sang	help
680eb6da20SWolfram Sang	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
690eb6da20SWolfram Sang	  The driver supports both read as well as write commands.
700eb6da20SWolfram Sang
710eb6da20SWolfram Sang	  If unsure, say N.
720eb6da20SWolfram Sang
7306b4501eSAnatolij Gustschinconfig EEPROM_93XX46
7406b4501eSAnatolij Gustschin	tristate "Microwire EEPROM 93XX46 support"
7506b4501eSAnatolij Gustschin	depends on SPI && SYSFS
7606b4501eSAnatolij Gustschin	help
7706b4501eSAnatolij Gustschin	  Driver for the microwire EEPROM chipsets 93xx46x. The driver
7806b4501eSAnatolij Gustschin	  supports both read and write commands and also the command to
7906b4501eSAnatolij Gustschin	  erase the whole EEPROM.
8006b4501eSAnatolij Gustschin
8106b4501eSAnatolij Gustschin	  This driver can also be built as a module.  If so, the module
8206b4501eSAnatolij Gustschin	  will be called eeprom_93xx46.
8306b4501eSAnatolij Gustschin
8406b4501eSAnatolij Gustschin	  If unsure, say N.
8506b4501eSAnatolij Gustschin
86469dded1SAnatolij Gustschinconfig EEPROM_DIGSY_MTC_CFG
87469dded1SAnatolij Gustschin	bool "DigsyMTC display configuration EEPROMs device"
88*001ef5e4SPaul Bolle	depends on GPIO_MPC5200 && SPI_GPIO
89469dded1SAnatolij Gustschin	help
90469dded1SAnatolij Gustschin	  This option enables access to display configuration EEPROMs
91469dded1SAnatolij Gustschin	  on digsy_mtc board. You have to additionally select Microwire
92469dded1SAnatolij Gustschin	  EEPROM 93XX46 driver. sysfs entries will be created for that
93469dded1SAnatolij Gustschin	  EEPROM allowing to read/write the configuration data or to
94469dded1SAnatolij Gustschin	  erase the whole EEPROM.
95469dded1SAnatolij Gustschin
96469dded1SAnatolij Gustschin	  If unsure, say N.
97469dded1SAnatolij Gustschin
985195e509SWolfram Sangendmenu
99