1# 2# Misc strange devices 3# 4 5menuconfig MISC_DEVICES 6 bool "Misc devices" 7 default y 8 ---help--- 9 Say Y here to get to see options for device drivers from various 10 different categories. This option alone does not add any kernel code. 11 12 If you say N, all options in this submenu will be skipped and disabled. 13 14if MISC_DEVICES 15 16config AD525X_DPOT 17 tristate "Analog Devices Digital Potentiometers" 18 depends on (I2C || SPI) && SYSFS 19 help 20 If you say yes here, you get support for the Analog Devices 21 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 22 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, 23 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, 24 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, 25 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, 26 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, 27 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173 28 digital potentiometer chips. 29 30 See Documentation/misc-devices/ad525x_dpot.txt for the 31 userspace interface. 32 33 This driver can also be built as a module. If so, the module 34 will be called ad525x_dpot. 35 36config AD525X_DPOT_I2C 37 tristate "support I2C bus connection" 38 depends on AD525X_DPOT && I2C 39 help 40 Say Y here if you have a digital potentiometers hooked to an I2C bus. 41 42 To compile this driver as a module, choose M here: the 43 module will be called ad525x_dpot-i2c. 44 45config AD525X_DPOT_SPI 46 tristate "support SPI bus connection" 47 depends on AD525X_DPOT && SPI_MASTER 48 help 49 Say Y here if you have a digital potentiometers hooked to an SPI bus. 50 51 If unsure, say N (but it's safe to say "Y"). 52 53 To compile this driver as a module, choose M here: the 54 module will be called ad525x_dpot-spi. 55 56config ATMEL_PWM 57 tristate "Atmel AT32/AT91 PWM support" 58 depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 59 help 60 This option enables device driver support for the PWM channels 61 on certain Atmel processors. Pulse Width Modulation is used for 62 purposes including software controlled power-efficient backlights 63 on LCD displays, motor control, and waveform generation. 64 65config ATMEL_TCLIB 66 bool "Atmel AT32/AT91 Timer/Counter Library" 67 depends on (AVR32 || ARCH_AT91) 68 help 69 Select this if you want a library to allocate the Timer/Counter 70 blocks found on many Atmel processors. This facilitates using 71 these blocks by different drivers despite processor differences. 72 73config ATMEL_TCB_CLKSRC 74 bool "TC Block Clocksource" 75 depends on ATMEL_TCLIB 76 default y 77 help 78 Select this to get a high precision clocksource based on a 79 TC block with a 5+ MHz base clock rate. Two timer channels 80 are combined to make a single 32-bit timer. 81 82 When GENERIC_CLOCKEVENTS is defined, the third timer channel 83 may be used as a clock event device supporting oneshot mode 84 (delays of up to two seconds) based on the 32 KiHz clock. 85 86config ATMEL_TCB_CLKSRC_BLOCK 87 int 88 depends on ATMEL_TCB_CLKSRC 89 prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X 90 default 0 91 range 0 1 92 help 93 Some chips provide more than one TC block, so you have the 94 choice of which one to use for the clock framework. The other 95 TC can be used for other purposes, such as PWM generation and 96 interval timing. 97 98config IBM_ASM 99 tristate "Device driver for IBM RSA service processor" 100 depends on X86 && PCI && INPUT && EXPERIMENTAL 101 ---help--- 102 This option enables device driver support for in-band access to the 103 IBM RSA (Condor) service processor in eServer xSeries systems. 104 The ibmasm device driver allows user space application to access 105 ASM (Advanced Systems Management) functions on the service 106 processor. The driver is meant to be used in conjunction with 107 a user space API. 108 The ibmasm driver also enables the OS to use the UART on the 109 service processor board as a regular serial port. To make use of 110 this feature serial driver support (CONFIG_SERIAL_8250) must be 111 enabled. 112 113 WARNING: This software may not be supported or function 114 correctly on your IBM server. Please consult the IBM ServerProven 115 website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for 116 information on the specific driver level and support statement 117 for your IBM server. 118 119config PHANTOM 120 tristate "Sensable PHANToM (PCI)" 121 depends on PCI 122 help 123 Say Y here if you want to build a driver for Sensable PHANToM device. 124 125 This driver is only for PCI PHANToMs. 126 127 If you choose to build module, its name will be phantom. If unsure, 128 say N here. 129 130config SGI_IOC4 131 tristate "SGI IOC4 Base IO support" 132 depends on PCI 133 ---help--- 134 This option enables basic support for the IOC4 chip on certain 135 SGI IO controller cards (IO9, IO10, and PCI-RT). This option 136 does not enable any specific functions on such a card, but provides 137 necessary infrastructure for other drivers to utilize. 138 139 If you have an SGI Altix with an IOC4-based card say Y. 140 Otherwise say N. 141 142config TIFM_CORE 143 tristate "TI Flash Media interface support (EXPERIMENTAL)" 144 depends on EXPERIMENTAL && PCI 145 help 146 If you want support for Texas Instruments(R) Flash Media adapters 147 you should select this option and then also choose an appropriate 148 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter 149 support', if you have a TI PCI74xx compatible card reader, for 150 example. 151 You will also have to select some flash card format drivers. MMC/SD 152 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD 153 Interface support (MMC_TIFM_SD)'. 154 155 To compile this driver as a module, choose M here: the module will 156 be called tifm_core. 157 158config TIFM_7XX1 159 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" 160 depends on PCI && TIFM_CORE && EXPERIMENTAL 161 default TIFM_CORE 162 help 163 This option enables support for Texas Instruments(R) PCI74xx and 164 PCI76xx families of Flash Media adapters, found in many laptops. 165 To make actual use of the device, you will have to select some 166 flash card format drivers, as outlined in the TIFM_CORE Help. 167 168 To compile this driver as a module, choose M here: the module will 169 be called tifm_7xx1. 170 171config ICS932S401 172 tristate "Integrated Circuits ICS932S401" 173 depends on I2C && EXPERIMENTAL 174 help 175 If you say yes here you get support for the Integrated Circuits 176 ICS932S401 clock control chips. 177 178 This driver can also be built as a module. If so, the module 179 will be called ics932s401. 180 181config ATMEL_SSC 182 tristate "Device driver for Atmel SSC peripheral" 183 depends on AVR32 || ARCH_AT91 184 ---help--- 185 This option enables device driver support for Atmel Synchronized 186 Serial Communication peripheral (SSC). 187 188 The SSC peripheral supports a wide variety of serial frame based 189 communications, i.e. I2S, SPI, etc. 190 191 If unsure, say N. 192 193config ENCLOSURE_SERVICES 194 tristate "Enclosure Services" 195 default n 196 help 197 Provides support for intelligent enclosures (bays which 198 contain storage devices). You also need either a host 199 driver (SCSI/ATA) which supports enclosures 200 or a SCSI enclosure device (SES) to use these services. 201 202config SGI_XP 203 tristate "Support communication between SGI SSIs" 204 depends on NET 205 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP 206 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 207 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 208 select SGI_GRU if X86_64 && SMP 209 ---help--- 210 An SGI machine can be divided into multiple Single System 211 Images which act independently of each other and have 212 hardware based memory protection from the others. Enabling 213 this feature will allow for direct communication between SSIs 214 based on a network adapter and DMA messaging. 215 216config CS5535_MFGPT 217 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 218 depends on PCI 219 depends on X86 220 default n 221 help 222 This driver provides access to MFGPT functionality for other 223 drivers that need timers. MFGPTs are available in the CS5535 and 224 CS5536 companion chips that are found in AMD Geode and several 225 other platforms. They have a better resolution and max interval 226 than the generic PIT, and are suitable for use as high-res timers. 227 You probably don't want to enable this manually; other drivers that 228 make use of it should enable it. 229 230config CS5535_MFGPT_DEFAULT_IRQ 231 int 232 depends on CS5535_MFGPT 233 default 7 234 help 235 MFGPTs on the CS5535 require an interrupt. The selected IRQ 236 can be overridden as a module option as well as by driver that 237 use the cs5535_mfgpt_ API; however, different architectures might 238 want to use a different IRQ by default. This is here for 239 architectures to set as necessary. 240 241config CS5535_CLOCK_EVENT_SRC 242 tristate "CS5535/CS5536 high-res timer (MFGPT) events" 243 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT 244 help 245 This driver provides a clock event source based on the MFGPT 246 timer(s) in the CS5535 and CS5536 companion chips. 247 MFGPTs have a better resolution and max interval than the 248 generic PIT, and are suitable for use as high-res timers. 249 250config HP_ILO 251 tristate "Channel interface driver for HP iLO/iLO2 processor" 252 depends on PCI 253 default n 254 help 255 The channel interface driver allows applications to communicate 256 with iLO/iLO2 management processors present on HP ProLiant 257 servers. Upon loading, the driver creates /dev/hpilo/dXccbN files, 258 which can be used to gather data from the management processor, 259 via read and write system calls. 260 261 To compile this driver as a module, choose M here: the 262 module will be called hpilo. 263 264config SGI_GRU 265 tristate "SGI GRU driver" 266 depends on X86_UV && SMP 267 default n 268 select MMU_NOTIFIER 269 ---help--- 270 The GRU is a hardware resource located in the system chipset. The GRU 271 contains memory that can be mmapped into the user address space. This memory is 272 used to communicate with the GRU to perform functions such as load/store, 273 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user 274 instructions using user virtual addresses. GRU instructions (ex., bcopy) use 275 user virtual addresses for operands. 276 277 If you are not running on a SGI UV system, say N. 278 279config SGI_GRU_DEBUG 280 bool "SGI GRU driver debug" 281 depends on SGI_GRU 282 default n 283 ---help--- 284 This option enables addition debugging code for the SGI GRU driver. If 285 you are unsure, say N. 286 287config ISL29003 288 tristate "Intersil ISL29003 ambient light sensor" 289 depends on I2C && SYSFS 290 help 291 If you say yes here you get support for the Intersil ISL29003 292 ambient light sensor. 293 294 This driver can also be built as a module. If so, the module 295 will be called isl29003. 296 297config SENSORS_TSL2550 298 tristate "Taos TSL2550 ambient light sensor" 299 depends on I2C && SYSFS 300 help 301 If you say yes here you get support for the Taos TSL2550 302 ambient light sensor. 303 304 This driver can also be built as a module. If so, the module 305 will be called tsl2550. 306 307config SENSORS_BH1780 308 tristate "ROHM BH1780GLI ambient light sensor" 309 depends on I2C && SYSFS 310 help 311 If you say yes here you get support for the ROHM BH1780GLI 312 ambient light sensor. 313 314 This driver can also be built as a module. If so, the module 315 will be called bh1780gli. 316 317config HMC6352 318 tristate "Honeywell HMC6352 compass" 319 depends on I2C 320 help 321 This driver provides support for the Honeywell HMC6352 compass, 322 providing configuration and heading data via sysfs. 323 324config EP93XX_PWM 325 tristate "EP93xx PWM support" 326 depends on ARCH_EP93XX 327 help 328 This option enables device driver support for the PWM channels 329 on the Cirrus EP93xx processors. The EP9307 chip only has one 330 PWM channel all the others have two, the second channel is an 331 alternate function of the EGPIO14 pin. A sysfs interface is 332 provided to control the PWM channels. 333 334 To compile this driver as a module, choose M here: the module will 335 be called ep93xx_pwm. 336 337config DS1682 338 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" 339 depends on I2C && EXPERIMENTAL 340 help 341 If you say yes here you get support for Dallas Semiconductor 342 DS1682 Total Elapsed Time Recorder. 343 344 This driver can also be built as a module. If so, the module 345 will be called ds1682. 346 347config TI_DAC7512 348 tristate "Texas Instruments DAC7512" 349 depends on SPI && SYSFS 350 help 351 If you say yes here you get support for the Texas Instruments 352 DAC7512 16-bit digital-to-analog converter. 353 354 This driver can also be built as a module. If so, the module 355 will be calles ti_dac7512. 356 357config VMWARE_BALLOON 358 tristate "VMware Balloon Driver" 359 depends on X86 360 help 361 This is VMware physical memory management driver which acts 362 like a "balloon" that can be inflated to reclaim physical pages 363 by reserving them in the guest and invalidating them in the 364 monitor, freeing up the underlying machine pages so they can 365 be allocated to other guests. The balloon can also be deflated 366 to allow the guest to use more physical memory. 367 368 If unsure, say N. 369 370 To compile this driver as a module, choose M here: the 371 module will be called vmware_balloon. 372 373config ARM_CHARLCD 374 bool "ARM Ltd. Character LCD Driver" 375 depends on PLAT_VERSATILE 376 help 377 This is a driver for the character LCD found on the ARM Ltd. 378 Versatile and RealView Platform Baseboards. It doesn't do 379 very much more than display the text "ARM Linux" on the first 380 line and the Linux version on the second line, but that's 381 still useful. 382 383config BMP085 384 tristate "BMP085 digital pressure sensor" 385 depends on I2C && SYSFS 386 help 387 If you say yes here you get support for the Bosch Sensortec 388 BMP086 digital pressure sensor. 389 390 To compile this driver as a module, choose M here: the 391 module will be called bmp085. 392 393source "drivers/misc/c2port/Kconfig" 394source "drivers/misc/eeprom/Kconfig" 395source "drivers/misc/cb710/Kconfig" 396source "drivers/misc/iwmc3200top/Kconfig" 397 398endif # MISC_DEVICES 399