1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Misc strange devices 4# 5 6menu "Misc devices" 7 8config SENSORS_LIS3LV02D 9 tristate 10 depends on INPUT 11 select INPUT_POLLDEV 12 13config AD525X_DPOT 14 tristate "Analog Devices Digital Potentiometers" 15 depends on (I2C || SPI) && SYSFS 16 help 17 If you say yes here, you get support for the Analog Devices 18 AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 19 AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, 20 AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, 21 AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, 22 AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, 23 AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, 24 ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, 25 AD5271, AD5272, AD5274 26 digital potentiometer chips. 27 28 See Documentation/misc-devices/ad525x_dpot.txt for the 29 userspace interface. 30 31 This driver can also be built as a module. If so, the module 32 will be called ad525x_dpot. 33 34config AD525X_DPOT_I2C 35 tristate "support I2C bus connection" 36 depends on AD525X_DPOT && I2C 37 help 38 Say Y here if you have a digital potentiometers hooked to an I2C bus. 39 40 To compile this driver as a module, choose M here: the 41 module will be called ad525x_dpot-i2c. 42 43config AD525X_DPOT_SPI 44 tristate "support SPI bus connection" 45 depends on AD525X_DPOT && SPI_MASTER 46 help 47 Say Y here if you have a digital potentiometers hooked to an SPI bus. 48 49 If unsure, say N (but it's safe to say "Y"). 50 51 To compile this driver as a module, choose M here: the 52 module will be called ad525x_dpot-spi. 53 54config ATMEL_TCLIB 55 bool "Atmel AT32/AT91 Timer/Counter Library" 56 depends on ARCH_AT91 57 help 58 Select this if you want a library to allocate the Timer/Counter 59 blocks found on many Atmel processors. This facilitates using 60 these blocks by different drivers despite processor differences. 61 62config DUMMY_IRQ 63 tristate "Dummy IRQ handler" 64 ---help--- 65 This module accepts a single 'irq' parameter, which it should register for. 66 The sole purpose of this module is to help with debugging of systems on 67 which spurious IRQs would happen on disabled IRQ vector. 68 69config IBM_ASM 70 tristate "Device driver for IBM RSA service processor" 71 depends on X86 && PCI && INPUT 72 depends on SERIAL_8250 || SERIAL_8250=n 73 ---help--- 74 This option enables device driver support for in-band access to the 75 IBM RSA (Condor) service processor in eServer xSeries systems. 76 The ibmasm device driver allows user space application to access 77 ASM (Advanced Systems Management) functions on the service 78 processor. The driver is meant to be used in conjunction with 79 a user space API. 80 The ibmasm driver also enables the OS to use the UART on the 81 service processor board as a regular serial port. To make use of 82 this feature serial driver support (CONFIG_SERIAL_8250) must be 83 enabled. 84 85 WARNING: This software may not be supported or function 86 correctly on your IBM server. Please consult the IBM ServerProven 87 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> 88 for information on the specific driver level and support statement 89 for your IBM server. 90 91config IBMVMC 92 tristate "IBM Virtual Management Channel support" 93 depends on PPC_PSERIES 94 help 95 This is the IBM POWER Virtual Management Channel 96 97 This driver is to be used for the POWER Virtual 98 Management Channel virtual adapter on the PowerVM 99 platform. It provides both request/response and 100 async message support through the /dev/ibmvmc node. 101 102 To compile this driver as a module, choose M here: the 103 module will be called ibmvmc. 104 105config PHANTOM 106 tristate "Sensable PHANToM (PCI)" 107 depends on PCI 108 help 109 Say Y here if you want to build a driver for Sensable PHANToM device. 110 111 This driver is only for PCI PHANToMs. 112 113 If you choose to build module, its name will be phantom. If unsure, 114 say N here. 115 116config INTEL_MID_PTI 117 tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" 118 depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST) 119 help 120 The PTI (Parallel Trace Interface) driver directs 121 trace data routed from various parts in the system out 122 through an Intel Penwell PTI port and out of the mobile 123 device for analysis with a debugging tool (Lauterbach or Fido). 124 125 You should select this driver if the target kernel is meant for 126 an Intel Atom (non-netbook) mobile device containing a MIPI 127 P1149.7 standard implementation. 128 129config SGI_IOC4 130 tristate "SGI IOC4 Base IO support" 131 depends on PCI 132 ---help--- 133 This option enables basic support for the IOC4 chip on certain 134 SGI IO controller cards (IO9, IO10, and PCI-RT). This option 135 does not enable any specific functions on such a card, but provides 136 necessary infrastructure for other drivers to utilize. 137 138 If you have an SGI Altix with an IOC4-based card say Y. 139 Otherwise say N. 140 141config TIFM_CORE 142 tristate "TI Flash Media interface support" 143 depends on PCI 144 help 145 If you want support for Texas Instruments(R) Flash Media adapters 146 you should select this option and then also choose an appropriate 147 host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter 148 support', if you have a TI PCI74xx compatible card reader, for 149 example. 150 You will also have to select some flash card format drivers. MMC/SD 151 cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD 152 Interface support (MMC_TIFM_SD)'. 153 154 To compile this driver as a module, choose M here: the module will 155 be called tifm_core. 156 157config TIFM_7XX1 158 tristate "TI Flash Media PCI74xx/PCI76xx host adapter support" 159 depends on PCI && TIFM_CORE 160 default TIFM_CORE 161 help 162 This option enables support for Texas Instruments(R) PCI74xx and 163 PCI76xx families of Flash Media adapters, found in many laptops. 164 To make actual use of the device, you will have to select some 165 flash card format drivers, as outlined in the TIFM_CORE Help. 166 167 To compile this driver as a module, choose M here: the module will 168 be called tifm_7xx1. 169 170config ICS932S401 171 tristate "Integrated Circuits ICS932S401" 172 depends on I2C 173 help 174 If you say yes here you get support for the Integrated Circuits 175 ICS932S401 clock control chips. 176 177 This driver can also be built as a module. If so, the module 178 will be called ics932s401. 179 180config ATMEL_SSC 181 tristate "Device driver for Atmel SSC peripheral" 182 depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST) 183 ---help--- 184 This option enables device driver support for Atmel Synchronized 185 Serial Communication peripheral (SSC). 186 187 The SSC peripheral supports a wide variety of serial frame based 188 communications, i.e. I2S, SPI, etc. 189 190 If unsure, say N. 191 192config ENCLOSURE_SERVICES 193 tristate "Enclosure Services" 194 help 195 Provides support for intelligent enclosures (bays which 196 contain storage devices). You also need either a host 197 driver (SCSI/ATA) which supports enclosures 198 or a SCSI enclosure device (SES) to use these services. 199 200config SGI_XP 201 tristate "Support communication between SGI SSIs" 202 depends on NET 203 depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP 204 select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 205 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 206 select SGI_GRU if X86_64 && SMP 207 ---help--- 208 An SGI machine can be divided into multiple Single System 209 Images which act independently of each other and have 210 hardware based memory protection from the others. Enabling 211 this feature will allow for direct communication between SSIs 212 based on a network adapter and DMA messaging. 213 214config CS5535_MFGPT 215 tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" 216 depends on MFD_CS5535 217 help 218 This driver provides access to MFGPT functionality for other 219 drivers that need timers. MFGPTs are available in the CS5535 and 220 CS5536 companion chips that are found in AMD Geode and several 221 other platforms. They have a better resolution and max interval 222 than the generic PIT, and are suitable for use as high-res timers. 223 You probably don't want to enable this manually; other drivers that 224 make use of it should enable it. 225 226config CS5535_MFGPT_DEFAULT_IRQ 227 int 228 depends on CS5535_MFGPT 229 default 7 230 help 231 MFGPTs on the CS5535 require an interrupt. The selected IRQ 232 can be overridden as a module option as well as by driver that 233 use the cs5535_mfgpt_ API; however, different architectures might 234 want to use a different IRQ by default. This is here for 235 architectures to set as necessary. 236 237config CS5535_CLOCK_EVENT_SRC 238 tristate "CS5535/CS5536 high-res timer (MFGPT) events" 239 depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT 240 help 241 This driver provides a clock event source based on the MFGPT 242 timer(s) in the CS5535 and CS5536 companion chips. 243 MFGPTs have a better resolution and max interval than the 244 generic PIT, and are suitable for use as high-res timers. 245 246config HP_ILO 247 tristate "Channel interface driver for the HP iLO processor" 248 depends on PCI 249 help 250 The channel interface driver allows applications to communicate 251 with iLO management processors present on HP ProLiant servers. 252 Upon loading, the driver creates /dev/hpilo/dXccbN files, which 253 can be used to gather data from the management processor, via 254 read and write system calls. 255 256 To compile this driver as a module, choose M here: the 257 module will be called hpilo. 258 259config QCOM_COINCELL 260 tristate "Qualcomm coincell charger support" 261 depends on MFD_SPMI_PMIC || COMPILE_TEST 262 help 263 This driver supports the coincell block found inside of 264 Qualcomm PMICs. The coincell charger provides a means to 265 charge a coincell battery or backup capacitor which is used 266 to maintain PMIC register and RTC state in the absence of 267 external power. 268 269config QCOM_FASTRPC 270 tristate "Qualcomm FastRPC" 271 depends on ARCH_QCOM || COMPILE_TEST 272 depends on RPMSG 273 select DMA_SHARED_BUFFER 274 help 275 Provides a communication mechanism that allows for clients to 276 make remote method invocations across processor boundary to 277 applications DSP processor. Say M if you want to enable this 278 module. 279 280config SGI_GRU 281 tristate "SGI GRU driver" 282 depends on X86_UV && SMP 283 select MMU_NOTIFIER 284 ---help--- 285 The GRU is a hardware resource located in the system chipset. The GRU 286 contains memory that can be mmapped into the user address space. This memory is 287 used to communicate with the GRU to perform functions such as load/store, 288 scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user 289 instructions using user virtual addresses. GRU instructions (ex., bcopy) use 290 user virtual addresses for operands. 291 292 If you are not running on a SGI UV system, say N. 293 294config SGI_GRU_DEBUG 295 bool "SGI GRU driver debug" 296 depends on SGI_GRU 297 ---help--- 298 This option enables additional debugging code for the SGI GRU driver. 299 If you are unsure, say N. 300 301config APDS9802ALS 302 tristate "Medfield Avago APDS9802 ALS Sensor module" 303 depends on I2C 304 help 305 If you say yes here you get support for the ALS APDS9802 ambient 306 light sensor. 307 308 This driver can also be built as a module. If so, the module 309 will be called apds9802als. 310 311config ISL29003 312 tristate "Intersil ISL29003 ambient light sensor" 313 depends on I2C && SYSFS 314 help 315 If you say yes here you get support for the Intersil ISL29003 316 ambient light sensor. 317 318 This driver can also be built as a module. If so, the module 319 will be called isl29003. 320 321config ISL29020 322 tristate "Intersil ISL29020 ambient light sensor" 323 depends on I2C 324 help 325 If you say yes here you get support for the Intersil ISL29020 326 ambient light sensor. 327 328 This driver can also be built as a module. If so, the module 329 will be called isl29020. 330 331config SENSORS_TSL2550 332 tristate "Taos TSL2550 ambient light sensor" 333 depends on I2C && SYSFS 334 help 335 If you say yes here you get support for the Taos TSL2550 336 ambient light sensor. 337 338 This driver can also be built as a module. If so, the module 339 will be called tsl2550. 340 341config SENSORS_BH1770 342 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" 343 depends on I2C 344 ---help--- 345 Say Y here if you want to build a driver for BH1770GLC (ROHM) or 346 SFH7770 (Osram) combined ambient light and proximity sensor chip. 347 348 To compile this driver as a module, choose M here: the 349 module will be called bh1770glc. If unsure, say N here. 350 351config SENSORS_APDS990X 352 tristate "APDS990X combined als and proximity sensors" 353 depends on I2C 354 ---help--- 355 Say Y here if you want to build a driver for Avago APDS990x 356 combined ambient light and proximity sensor chip. 357 358 To compile this driver as a module, choose M here: the 359 module will be called apds990x. If unsure, say N here. 360 361config HMC6352 362 tristate "Honeywell HMC6352 compass" 363 depends on I2C 364 help 365 This driver provides support for the Honeywell HMC6352 compass, 366 providing configuration and heading data via sysfs. 367 368config DS1682 369 tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" 370 depends on I2C 371 help 372 If you say yes here you get support for Dallas Semiconductor 373 DS1682 Total Elapsed Time Recorder. 374 375 This driver can also be built as a module. If so, the module 376 will be called ds1682. 377 378config SPEAR13XX_PCIE_GADGET 379 bool "PCIe gadget support for SPEAr13XX platform" 380 depends on ARCH_SPEAR13XX && BROKEN 381 help 382 This option enables gadget support for PCIe controller. If 383 board file defines any controller as PCIe endpoint then a sysfs 384 entry will be created for that controller. User can use these 385 sysfs node to configure PCIe EP as per his requirements. 386 387config VMWARE_BALLOON 388 tristate "VMware Balloon Driver" 389 depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST 390 select MEMORY_BALLOON 391 help 392 This is VMware physical memory management driver which acts 393 like a "balloon" that can be inflated to reclaim physical pages 394 by reserving them in the guest and invalidating them in the 395 monitor, freeing up the underlying machine pages so they can 396 be allocated to other guests. The balloon can also be deflated 397 to allow the guest to use more physical memory. 398 399 If unsure, say N. 400 401 To compile this driver as a module, choose M here: the 402 module will be called vmw_balloon. 403 404config PCH_PHUB 405 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" 406 select GENERIC_NET_UTILS 407 depends on PCI && (X86_32 || MIPS || COMPILE_TEST) 408 help 409 This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of 410 Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded 411 processor. The Topcliff has MAC address and Option ROM data in SROM. 412 This driver can access MAC address and Option ROM data in SROM. 413 414 This driver also can be used for LAPIS Semiconductor's IOH, 415 ML7213/ML7223/ML7831. 416 ML7213 which is for IVI(In-Vehicle Infotainment) use. 417 ML7223 IOH is for MP(Media Phone) use. 418 ML7831 IOH is for general purpose use. 419 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. 420 ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. 421 422 To compile this driver as a module, choose M here: the module will 423 be called pch_phub. 424 425config LATTICE_ECP3_CONFIG 426 tristate "Lattice ECP3 FPGA bitstream configuration via SPI" 427 depends on SPI && SYSFS 428 select FW_LOADER 429 default n 430 help 431 This option enables support for bitstream configuration (programming 432 or loading) of the Lattice ECP3 FPGA family via SPI. 433 434 If unsure, say N. 435 436config SRAM 437 bool "Generic on-chip SRAM driver" 438 depends on HAS_IOMEM 439 select GENERIC_ALLOCATOR 440 select SRAM_EXEC if ARM 441 help 442 This driver allows you to declare a memory region to be managed by 443 the genalloc API. It is supposed to be used for small on-chip SRAM 444 areas found on many SoCs. 445 446config SRAM_EXEC 447 bool 448 449config VEXPRESS_SYSCFG 450 bool "Versatile Express System Configuration driver" 451 depends on VEXPRESS_CONFIG 452 default y 453 help 454 ARM Ltd. Versatile Express uses specialised platform configuration 455 bus. System Configuration interface is one of the possible means 456 of generating transactions on this bus. 457 458config PCI_ENDPOINT_TEST 459 depends on PCI 460 select CRC32 461 tristate "PCI Endpoint Test driver" 462 ---help--- 463 Enable this configuration option to enable the host side test driver 464 for PCI Endpoint. 465 466config XILINX_SDFEC 467 tristate "Xilinx SDFEC 16" 468 help 469 This option enables support for the Xilinx SDFEC (Soft Decision 470 Forward Error Correction) driver. This enables a char driver 471 for the SDFEC. 472 473 You may select this driver if your design instantiates the 474 SDFEC(16nm) hardened block. To compile this as a module choose M. 475 476 If unsure, say N. 477 478config MISC_RTSX 479 tristate 480 default MISC_RTSX_PCI || MISC_RTSX_USB 481 482config PVPANIC 483 tristate "pvpanic device support" 484 depends on HAS_IOMEM && (ACPI || OF) 485 help 486 This driver provides support for the pvpanic device. pvpanic is 487 a paravirtualized device provided by QEMU; it lets a virtual machine 488 (guest) communicate panic events to the host. 489 490source "drivers/misc/c2port/Kconfig" 491source "drivers/misc/eeprom/Kconfig" 492source "drivers/misc/cb710/Kconfig" 493source "drivers/misc/ti-st/Kconfig" 494source "drivers/misc/lis3lv02d/Kconfig" 495source "drivers/misc/altera-stapl/Kconfig" 496source "drivers/misc/mei/Kconfig" 497source "drivers/misc/vmw_vmci/Kconfig" 498source "drivers/misc/mic/Kconfig" 499source "drivers/misc/genwqe/Kconfig" 500source "drivers/misc/echo/Kconfig" 501source "drivers/misc/cxl/Kconfig" 502source "drivers/misc/ocxl/Kconfig" 503source "drivers/misc/cardreader/Kconfig" 504source "drivers/misc/habanalabs/Kconfig" 505endmenu 506