xref: /linux/drivers/mfd/twl6040.c (revision 4949009eb8d40a441dcddcd96e101e77d31cf1b2)
1 /*
2  * MFD driver for TWL6040 audio device
3  *
4  * Authors:	Misael Lopez Cruz <misael.lopez@ti.com>
5  *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
6  *		Peter Ujfalusi <peter.ujfalusi@ti.com>
7  *
8  * Copyright:	(C) 2011 Texas Instruments, Inc.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22  * 02110-1301 USA
23  *
24  */
25 
26 #include <linux/module.h>
27 #include <linux/types.h>
28 #include <linux/slab.h>
29 #include <linux/kernel.h>
30 #include <linux/err.h>
31 #include <linux/platform_device.h>
32 #include <linux/of.h>
33 #include <linux/of_irq.h>
34 #include <linux/of_gpio.h>
35 #include <linux/of_platform.h>
36 #include <linux/gpio.h>
37 #include <linux/delay.h>
38 #include <linux/i2c.h>
39 #include <linux/regmap.h>
40 #include <linux/mfd/core.h>
41 #include <linux/mfd/twl6040.h>
42 #include <linux/regulator/consumer.h>
43 
44 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
45 #define TWL6040_NUM_SUPPLIES	(2)
46 
47 static struct reg_default twl6040_defaults[] = {
48 	{ 0x01, 0x4B }, /* REG_ASICID	(ro) */
49 	{ 0x02, 0x00 }, /* REG_ASICREV	(ro) */
50 	{ 0x03, 0x00 }, /* REG_INTID	*/
51 	{ 0x04, 0x00 }, /* REG_INTMR	*/
52 	{ 0x05, 0x00 }, /* REG_NCPCTRL	*/
53 	{ 0x06, 0x00 }, /* REG_LDOCTL	*/
54 	{ 0x07, 0x60 }, /* REG_HPPLLCTL	*/
55 	{ 0x08, 0x00 }, /* REG_LPPLLCTL	*/
56 	{ 0x09, 0x4A }, /* REG_LPPLLDIV	*/
57 	{ 0x0A, 0x00 }, /* REG_AMICBCTL	*/
58 	{ 0x0B, 0x00 }, /* REG_DMICBCTL	*/
59 	{ 0x0C, 0x00 }, /* REG_MICLCTL	*/
60 	{ 0x0D, 0x00 }, /* REG_MICRCTL	*/
61 	{ 0x0E, 0x00 }, /* REG_MICGAIN	*/
62 	{ 0x0F, 0x1B }, /* REG_LINEGAIN	*/
63 	{ 0x10, 0x00 }, /* REG_HSLCTL	*/
64 	{ 0x11, 0x00 }, /* REG_HSRCTL	*/
65 	{ 0x12, 0x00 }, /* REG_HSGAIN	*/
66 	{ 0x13, 0x00 }, /* REG_EARCTL	*/
67 	{ 0x14, 0x00 }, /* REG_HFLCTL	*/
68 	{ 0x15, 0x00 }, /* REG_HFLGAIN	*/
69 	{ 0x16, 0x00 }, /* REG_HFRCTL	*/
70 	{ 0x17, 0x00 }, /* REG_HFRGAIN	*/
71 	{ 0x18, 0x00 }, /* REG_VIBCTLL	*/
72 	{ 0x19, 0x00 }, /* REG_VIBDATL	*/
73 	{ 0x1A, 0x00 }, /* REG_VIBCTLR	*/
74 	{ 0x1B, 0x00 }, /* REG_VIBDATR	*/
75 	{ 0x1C, 0x00 }, /* REG_HKCTL1	*/
76 	{ 0x1D, 0x00 }, /* REG_HKCTL2	*/
77 	{ 0x1E, 0x00 }, /* REG_GPOCTL	*/
78 	{ 0x1F, 0x00 }, /* REG_ALB	*/
79 	{ 0x20, 0x00 }, /* REG_DLB	*/
80 	/* 0x28, REG_TRIM1 */
81 	/* 0x29, REG_TRIM2 */
82 	/* 0x2A, REG_TRIM3 */
83 	/* 0x2B, REG_HSOTRIM */
84 	/* 0x2C, REG_HFOTRIM */
85 	{ 0x2D, 0x08 }, /* REG_ACCCTL	*/
86 	{ 0x2E, 0x00 }, /* REG_STATUS	(ro) */
87 };
88 
89 static struct reg_default twl6040_patch[] = {
90 	/*
91 	 * Select I2C bus access to dual access registers
92 	 * Interrupt register is cleared on read
93 	 * Select fast mode for i2c (400KHz)
94 	 */
95 	{ TWL6040_REG_ACCCTL,
96 		TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
97 };
98 
99 
100 static bool twl6040_has_vibra(struct device_node *node)
101 {
102 #ifdef CONFIG_OF
103 	if (of_find_node_by_name(node, "vibra"))
104 		return true;
105 #endif
106 	return false;
107 }
108 
109 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
110 {
111 	int ret;
112 	unsigned int val;
113 
114 	ret = regmap_read(twl6040->regmap, reg, &val);
115 	if (ret < 0)
116 		return ret;
117 
118 	return val;
119 }
120 EXPORT_SYMBOL(twl6040_reg_read);
121 
122 int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
123 {
124 	int ret;
125 
126 	ret = regmap_write(twl6040->regmap, reg, val);
127 
128 	return ret;
129 }
130 EXPORT_SYMBOL(twl6040_reg_write);
131 
132 int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
133 {
134 	return regmap_update_bits(twl6040->regmap, reg, mask, mask);
135 }
136 EXPORT_SYMBOL(twl6040_set_bits);
137 
138 int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
139 {
140 	return regmap_update_bits(twl6040->regmap, reg, mask, 0);
141 }
142 EXPORT_SYMBOL(twl6040_clear_bits);
143 
144 /* twl6040 codec manual power-up sequence */
145 static int twl6040_power_up_manual(struct twl6040 *twl6040)
146 {
147 	u8 ldoctl, ncpctl, lppllctl;
148 	int ret;
149 
150 	/* enable high-side LDO, reference system and internal oscillator */
151 	ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
152 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
153 	if (ret)
154 		return ret;
155 	usleep_range(10000, 10500);
156 
157 	/* enable negative charge pump */
158 	ncpctl = TWL6040_NCPENA;
159 	ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
160 	if (ret)
161 		goto ncp_err;
162 	usleep_range(1000, 1500);
163 
164 	/* enable low-side LDO */
165 	ldoctl |= TWL6040_LSLDOENA;
166 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
167 	if (ret)
168 		goto lsldo_err;
169 	usleep_range(1000, 1500);
170 
171 	/* enable low-power PLL */
172 	lppllctl = TWL6040_LPLLENA;
173 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
174 	if (ret)
175 		goto lppll_err;
176 	usleep_range(5000, 5500);
177 
178 	/* disable internal oscillator */
179 	ldoctl &= ~TWL6040_OSCENA;
180 	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
181 	if (ret)
182 		goto osc_err;
183 
184 	return 0;
185 
186 osc_err:
187 	lppllctl &= ~TWL6040_LPLLENA;
188 	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
189 lppll_err:
190 	ldoctl &= ~TWL6040_LSLDOENA;
191 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
192 lsldo_err:
193 	ncpctl &= ~TWL6040_NCPENA;
194 	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
195 ncp_err:
196 	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
197 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
198 
199 	dev_err(twl6040->dev, "manual power-up failed\n");
200 	return ret;
201 }
202 
203 /* twl6040 manual power-down sequence */
204 static void twl6040_power_down_manual(struct twl6040 *twl6040)
205 {
206 	u8 ncpctl, ldoctl, lppllctl;
207 
208 	ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
209 	ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
210 	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
211 
212 	/* enable internal oscillator */
213 	ldoctl |= TWL6040_OSCENA;
214 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
215 	usleep_range(1000, 1500);
216 
217 	/* disable low-power PLL */
218 	lppllctl &= ~TWL6040_LPLLENA;
219 	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
220 
221 	/* disable low-side LDO */
222 	ldoctl &= ~TWL6040_LSLDOENA;
223 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
224 
225 	/* disable negative charge pump */
226 	ncpctl &= ~TWL6040_NCPENA;
227 	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
228 
229 	/* disable high-side LDO, reference system and internal oscillator */
230 	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
231 	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
232 }
233 
234 static irqreturn_t twl6040_readyint_handler(int irq, void *data)
235 {
236 	struct twl6040 *twl6040 = data;
237 
238 	complete(&twl6040->ready);
239 
240 	return IRQ_HANDLED;
241 }
242 
243 static irqreturn_t twl6040_thint_handler(int irq, void *data)
244 {
245 	struct twl6040 *twl6040 = data;
246 	u8 status;
247 
248 	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
249 	if (status & TWL6040_TSHUTDET) {
250 		dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
251 		twl6040_power(twl6040, 0);
252 	} else {
253 		dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
254 		twl6040_power(twl6040, 1);
255 	}
256 
257 	return IRQ_HANDLED;
258 }
259 
260 static int twl6040_power_up_automatic(struct twl6040 *twl6040)
261 {
262 	int time_left;
263 
264 	gpio_set_value(twl6040->audpwron, 1);
265 
266 	time_left = wait_for_completion_timeout(&twl6040->ready,
267 						msecs_to_jiffies(144));
268 	if (!time_left) {
269 		u8 intid;
270 
271 		dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
272 		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
273 		if (!(intid & TWL6040_READYINT)) {
274 			dev_err(twl6040->dev, "automatic power-up failed\n");
275 			gpio_set_value(twl6040->audpwron, 0);
276 			return -ETIMEDOUT;
277 		}
278 	}
279 
280 	return 0;
281 }
282 
283 int twl6040_power(struct twl6040 *twl6040, int on)
284 {
285 	int ret = 0;
286 
287 	mutex_lock(&twl6040->mutex);
288 
289 	if (on) {
290 		/* already powered-up */
291 		if (twl6040->power_count++)
292 			goto out;
293 
294 		clk_prepare_enable(twl6040->clk32k);
295 
296 		/* Allow writes to the chip */
297 		regcache_cache_only(twl6040->regmap, false);
298 
299 		if (gpio_is_valid(twl6040->audpwron)) {
300 			/* use automatic power-up sequence */
301 			ret = twl6040_power_up_automatic(twl6040);
302 			if (ret) {
303 				twl6040->power_count = 0;
304 				goto out;
305 			}
306 		} else {
307 			/* use manual power-up sequence */
308 			ret = twl6040_power_up_manual(twl6040);
309 			if (ret) {
310 				twl6040->power_count = 0;
311 				goto out;
312 			}
313 		}
314 
315 		/* Sync with the HW */
316 		regcache_sync(twl6040->regmap);
317 
318 		/* Default PLL configuration after power up */
319 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
320 		twl6040->sysclk = 19200000;
321 		twl6040->mclk = 32768;
322 	} else {
323 		/* already powered-down */
324 		if (!twl6040->power_count) {
325 			dev_err(twl6040->dev,
326 				"device is already powered-off\n");
327 			ret = -EPERM;
328 			goto out;
329 		}
330 
331 		if (--twl6040->power_count)
332 			goto out;
333 
334 		if (gpio_is_valid(twl6040->audpwron)) {
335 			/* use AUDPWRON line */
336 			gpio_set_value(twl6040->audpwron, 0);
337 
338 			/* power-down sequence latency */
339 			usleep_range(500, 700);
340 		} else {
341 			/* use manual power-down sequence */
342 			twl6040_power_down_manual(twl6040);
343 		}
344 
345 		/* Set regmap to cache only and mark it as dirty */
346 		regcache_cache_only(twl6040->regmap, true);
347 		regcache_mark_dirty(twl6040->regmap);
348 
349 		twl6040->sysclk = 0;
350 		twl6040->mclk = 0;
351 
352 		clk_disable_unprepare(twl6040->clk32k);
353 	}
354 
355 out:
356 	mutex_unlock(&twl6040->mutex);
357 	return ret;
358 }
359 EXPORT_SYMBOL(twl6040_power);
360 
361 int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
362 		    unsigned int freq_in, unsigned int freq_out)
363 {
364 	u8 hppllctl, lppllctl;
365 	int ret = 0;
366 
367 	mutex_lock(&twl6040->mutex);
368 
369 	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
370 	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
371 
372 	/* Force full reconfiguration when switching between PLL */
373 	if (pll_id != twl6040->pll) {
374 		twl6040->sysclk = 0;
375 		twl6040->mclk = 0;
376 	}
377 
378 	switch (pll_id) {
379 	case TWL6040_SYSCLK_SEL_LPPLL:
380 		/* low-power PLL divider */
381 		/* Change the sysclk configuration only if it has been canged */
382 		if (twl6040->sysclk != freq_out) {
383 			switch (freq_out) {
384 			case 17640000:
385 				lppllctl |= TWL6040_LPLLFIN;
386 				break;
387 			case 19200000:
388 				lppllctl &= ~TWL6040_LPLLFIN;
389 				break;
390 			default:
391 				dev_err(twl6040->dev,
392 					"freq_out %d not supported\n",
393 					freq_out);
394 				ret = -EINVAL;
395 				goto pll_out;
396 			}
397 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
398 					  lppllctl);
399 		}
400 
401 		/* The PLL in use has not been change, we can exit */
402 		if (twl6040->pll == pll_id)
403 			break;
404 
405 		switch (freq_in) {
406 		case 32768:
407 			lppllctl |= TWL6040_LPLLENA;
408 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
409 					  lppllctl);
410 			mdelay(5);
411 			lppllctl &= ~TWL6040_HPLLSEL;
412 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
413 					  lppllctl);
414 			hppllctl &= ~TWL6040_HPLLENA;
415 			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
416 					  hppllctl);
417 			break;
418 		default:
419 			dev_err(twl6040->dev,
420 				"freq_in %d not supported\n", freq_in);
421 			ret = -EINVAL;
422 			goto pll_out;
423 		}
424 		break;
425 	case TWL6040_SYSCLK_SEL_HPPLL:
426 		/* high-performance PLL can provide only 19.2 MHz */
427 		if (freq_out != 19200000) {
428 			dev_err(twl6040->dev,
429 				"freq_out %d not supported\n", freq_out);
430 			ret = -EINVAL;
431 			goto pll_out;
432 		}
433 
434 		if (twl6040->mclk != freq_in) {
435 			hppllctl &= ~TWL6040_MCLK_MSK;
436 
437 			switch (freq_in) {
438 			case 12000000:
439 				/* PLL enabled, active mode */
440 				hppllctl |= TWL6040_MCLK_12000KHZ |
441 					    TWL6040_HPLLENA;
442 				break;
443 			case 19200000:
444 				/* PLL enabled, bypass mode */
445 				hppllctl |= TWL6040_MCLK_19200KHZ |
446 					    TWL6040_HPLLBP | TWL6040_HPLLENA;
447 				break;
448 			case 26000000:
449 				/* PLL enabled, active mode */
450 				hppllctl |= TWL6040_MCLK_26000KHZ |
451 					    TWL6040_HPLLENA;
452 				break;
453 			case 38400000:
454 				/* PLL enabled, bypass mode */
455 				hppllctl |= TWL6040_MCLK_38400KHZ |
456 					    TWL6040_HPLLBP | TWL6040_HPLLENA;
457 				break;
458 			default:
459 				dev_err(twl6040->dev,
460 					"freq_in %d not supported\n", freq_in);
461 				ret = -EINVAL;
462 				goto pll_out;
463 			}
464 
465 			/*
466 			 * enable clock slicer to ensure input waveform is
467 			 * square
468 			 */
469 			hppllctl |= TWL6040_HPLLSQRENA;
470 
471 			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
472 					  hppllctl);
473 			usleep_range(500, 700);
474 			lppllctl |= TWL6040_HPLLSEL;
475 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
476 					  lppllctl);
477 			lppllctl &= ~TWL6040_LPLLENA;
478 			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
479 					  lppllctl);
480 		}
481 		break;
482 	default:
483 		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
484 		ret = -EINVAL;
485 		goto pll_out;
486 	}
487 
488 	twl6040->sysclk = freq_out;
489 	twl6040->mclk = freq_in;
490 	twl6040->pll = pll_id;
491 
492 pll_out:
493 	mutex_unlock(&twl6040->mutex);
494 	return ret;
495 }
496 EXPORT_SYMBOL(twl6040_set_pll);
497 
498 int twl6040_get_pll(struct twl6040 *twl6040)
499 {
500 	if (twl6040->power_count)
501 		return twl6040->pll;
502 	else
503 		return -ENODEV;
504 }
505 EXPORT_SYMBOL(twl6040_get_pll);
506 
507 unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
508 {
509 	return twl6040->sysclk;
510 }
511 EXPORT_SYMBOL(twl6040_get_sysclk);
512 
513 /* Get the combined status of the vibra control register */
514 int twl6040_get_vibralr_status(struct twl6040 *twl6040)
515 {
516 	unsigned int reg;
517 	int ret;
518 	u8 status;
519 
520 	ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, &reg);
521 	if (ret != 0)
522 		return ret;
523 	status = reg;
524 
525 	ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, &reg);
526 	if (ret != 0)
527 		return ret;
528 	status |= reg;
529 
530 	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
531 
532 	return status;
533 }
534 EXPORT_SYMBOL(twl6040_get_vibralr_status);
535 
536 static struct resource twl6040_vibra_rsrc[] = {
537 	{
538 		.flags = IORESOURCE_IRQ,
539 	},
540 };
541 
542 static struct resource twl6040_codec_rsrc[] = {
543 	{
544 		.flags = IORESOURCE_IRQ,
545 	},
546 };
547 
548 static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
549 {
550 	/* Register 0 is not readable */
551 	if (!reg)
552 		return false;
553 	return true;
554 }
555 
556 static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
557 {
558 	switch (reg) {
559 	case TWL6040_REG_ASICID:
560 	case TWL6040_REG_ASICREV:
561 	case TWL6040_REG_INTID:
562 	case TWL6040_REG_LPPLLCTL:
563 	case TWL6040_REG_HPPLLCTL:
564 	case TWL6040_REG_STATUS:
565 		return true;
566 	default:
567 		return false;
568 	}
569 }
570 
571 static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
572 {
573 	switch (reg) {
574 	case TWL6040_REG_ASICID:
575 	case TWL6040_REG_ASICREV:
576 	case TWL6040_REG_STATUS:
577 		return false;
578 	default:
579 		return true;
580 	}
581 }
582 
583 static struct regmap_config twl6040_regmap_config = {
584 	.reg_bits = 8,
585 	.val_bits = 8,
586 
587 	.reg_defaults = twl6040_defaults,
588 	.num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
589 
590 	.max_register = TWL6040_REG_STATUS, /* 0x2e */
591 
592 	.readable_reg = twl6040_readable_reg,
593 	.volatile_reg = twl6040_volatile_reg,
594 	.writeable_reg = twl6040_writeable_reg,
595 
596 	.cache_type = REGCACHE_RBTREE,
597 };
598 
599 static const struct regmap_irq twl6040_irqs[] = {
600 	{ .reg_offset = 0, .mask = TWL6040_THINT, },
601 	{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
602 	{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
603 	{ .reg_offset = 0, .mask = TWL6040_HFINT, },
604 	{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
605 	{ .reg_offset = 0, .mask = TWL6040_READYINT, },
606 };
607 
608 static struct regmap_irq_chip twl6040_irq_chip = {
609 	.name = "twl6040",
610 	.irqs = twl6040_irqs,
611 	.num_irqs = ARRAY_SIZE(twl6040_irqs),
612 
613 	.num_regs = 1,
614 	.status_base = TWL6040_REG_INTID,
615 	.mask_base = TWL6040_REG_INTMR,
616 };
617 
618 static int twl6040_probe(struct i2c_client *client,
619 			 const struct i2c_device_id *id)
620 {
621 	struct device_node *node = client->dev.of_node;
622 	struct twl6040 *twl6040;
623 	struct mfd_cell *cell = NULL;
624 	int irq, ret, children = 0;
625 
626 	if (!node) {
627 		dev_err(&client->dev, "of node is missing\n");
628 		return -EINVAL;
629 	}
630 
631 	/* In order to operate correctly we need valid interrupt config */
632 	if (!client->irq) {
633 		dev_err(&client->dev, "Invalid IRQ configuration\n");
634 		return -EINVAL;
635 	}
636 
637 	twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
638 			       GFP_KERNEL);
639 	if (!twl6040)
640 		return -ENOMEM;
641 
642 	twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
643 	if (IS_ERR(twl6040->regmap))
644 		return PTR_ERR(twl6040->regmap);
645 
646 	i2c_set_clientdata(client, twl6040);
647 
648 	twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
649 	if (IS_ERR(twl6040->clk32k)) {
650 		dev_info(&client->dev, "clk32k is not handled\n");
651 		twl6040->clk32k = NULL;
652 	}
653 
654 	twl6040->supplies[0].supply = "vio";
655 	twl6040->supplies[1].supply = "v2v1";
656 	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
657 				      twl6040->supplies);
658 	if (ret != 0) {
659 		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
660 		return ret;
661 	}
662 
663 	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
664 	if (ret != 0) {
665 		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
666 		return ret;
667 	}
668 
669 	twl6040->dev = &client->dev;
670 	twl6040->irq = client->irq;
671 
672 	mutex_init(&twl6040->mutex);
673 	init_completion(&twl6040->ready);
674 
675 	regmap_register_patch(twl6040->regmap, twl6040_patch,
676 			      ARRAY_SIZE(twl6040_patch));
677 
678 	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
679 	if (twl6040->rev < 0) {
680 		dev_err(&client->dev, "Failed to read revision register: %d\n",
681 			twl6040->rev);
682 		ret = twl6040->rev;
683 		goto gpio_err;
684 	}
685 
686 	/* ERRATA: Automatic power-up is not possible in ES1.0 */
687 	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
688 		twl6040->audpwron = of_get_named_gpio(node,
689 						      "ti,audpwron-gpio", 0);
690 	else
691 		twl6040->audpwron = -EINVAL;
692 
693 	if (gpio_is_valid(twl6040->audpwron)) {
694 		ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
695 					    GPIOF_OUT_INIT_LOW, "audpwron");
696 		if (ret)
697 			goto gpio_err;
698 
699 		/* Clear any pending interrupt */
700 		twl6040_reg_read(twl6040, TWL6040_REG_INTID);
701 	}
702 
703 	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
704 				  0, &twl6040_irq_chip, &twl6040->irq_data);
705 	if (ret < 0)
706 		goto gpio_err;
707 
708 	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
709 						 TWL6040_IRQ_READY);
710 	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
711 					      TWL6040_IRQ_TH);
712 
713 	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
714 					twl6040_readyint_handler, IRQF_ONESHOT,
715 					"twl6040_irq_ready", twl6040);
716 	if (ret) {
717 		dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
718 		goto readyirq_err;
719 	}
720 
721 	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
722 					twl6040_thint_handler, IRQF_ONESHOT,
723 					"twl6040_irq_th", twl6040);
724 	if (ret) {
725 		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
726 		goto readyirq_err;
727 	}
728 
729 	/*
730 	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
731 	 * We can add the ASoC codec child whenever this driver has been loaded.
732 	 */
733 	irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
734 	cell = &twl6040->cells[children];
735 	cell->name = "twl6040-codec";
736 	twl6040_codec_rsrc[0].start = irq;
737 	twl6040_codec_rsrc[0].end = irq;
738 	cell->resources = twl6040_codec_rsrc;
739 	cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
740 	children++;
741 
742 	/* Vibra input driver support */
743 	if (twl6040_has_vibra(node)) {
744 		irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
745 
746 		cell = &twl6040->cells[children];
747 		cell->name = "twl6040-vibra";
748 		twl6040_vibra_rsrc[0].start = irq;
749 		twl6040_vibra_rsrc[0].end = irq;
750 		cell->resources = twl6040_vibra_rsrc;
751 		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
752 		children++;
753 	}
754 
755 	/* GPO support */
756 	cell = &twl6040->cells[children];
757 	cell->name = "twl6040-gpo";
758 	children++;
759 
760 	/* The chip is powered down so mark regmap to cache only and dirty */
761 	regcache_cache_only(twl6040->regmap, true);
762 	regcache_mark_dirty(twl6040->regmap);
763 
764 	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
765 			      NULL, 0, NULL);
766 	if (ret)
767 		goto readyirq_err;
768 
769 	return 0;
770 
771 readyirq_err:
772 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
773 gpio_err:
774 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
775 	return ret;
776 }
777 
778 static int twl6040_remove(struct i2c_client *client)
779 {
780 	struct twl6040 *twl6040 = i2c_get_clientdata(client);
781 
782 	if (twl6040->power_count)
783 		twl6040_power(twl6040, 0);
784 
785 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
786 
787 	mfd_remove_devices(&client->dev);
788 
789 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
790 
791 	return 0;
792 }
793 
794 static const struct i2c_device_id twl6040_i2c_id[] = {
795 	{ "twl6040", 0, },
796 	{ "twl6041", 0, },
797 	{ },
798 };
799 MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
800 
801 static struct i2c_driver twl6040_driver = {
802 	.driver = {
803 		.name = "twl6040",
804 		.owner = THIS_MODULE,
805 	},
806 	.probe		= twl6040_probe,
807 	.remove		= twl6040_remove,
808 	.id_table	= twl6040_i2c_id,
809 };
810 
811 module_i2c_driver(twl6040_driver);
812 
813 MODULE_DESCRIPTION("TWL6040 MFD");
814 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
815 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
816 MODULE_LICENSE("GPL");
817 MODULE_ALIAS("platform:twl6040");
818