1 /* 2 * twl6030-irq.c - TWL6030 irq support 3 * 4 * Copyright (C) 2005-2009 Texas Instruments, Inc. 5 * 6 * Modifications to defer interrupt handling to a kernel thread: 7 * Copyright (C) 2006 MontaVista Software, Inc. 8 * 9 * Based on tlv320aic23.c: 10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> 11 * 12 * Code cleanup and modifications to IRQ handler. 13 * by syed khasim <x0khasim@ti.com> 14 * 15 * TWL6030 specific code and IRQ handling changes by 16 * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com> 17 * Balaji T K <balajitk@ti.com> 18 * 19 * This program is free software; you can redistribute it and/or modify 20 * it under the terms of the GNU General Public License as published by 21 * the Free Software Foundation; either version 2 of the License, or 22 * (at your option) any later version. 23 * 24 * This program is distributed in the hope that it will be useful, 25 * but WITHOUT ANY WARRANTY; without even the implied warranty of 26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 27 * GNU General Public License for more details. 28 * 29 * You should have received a copy of the GNU General Public License 30 * along with this program; if not, write to the Free Software 31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 32 */ 33 34 #include <linux/export.h> 35 #include <linux/interrupt.h> 36 #include <linux/irq.h> 37 #include <linux/kthread.h> 38 #include <linux/mfd/twl.h> 39 #include <linux/platform_device.h> 40 #include <linux/suspend.h> 41 #include <linux/of.h> 42 #include <linux/irqdomain.h> 43 #include <linux/of_device.h> 44 45 #include "twl-core.h" 46 47 /* 48 * TWL6030 (unlike its predecessors, which had two level interrupt handling) 49 * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C. 50 * It exposes status bits saying who has raised an interrupt. There are 51 * three mask registers that corresponds to these status registers, that 52 * enables/disables these interrupts. 53 * 54 * We set up IRQs starting at a platform-specified base. An interrupt map table, 55 * specifies mapping between interrupt number and the associated module. 56 */ 57 #define TWL6030_NR_IRQS 20 58 59 static int twl6030_interrupt_mapping[24] = { 60 PWR_INTR_OFFSET, /* Bit 0 PWRON */ 61 PWR_INTR_OFFSET, /* Bit 1 RPWRON */ 62 PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */ 63 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ 64 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ 65 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ 66 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ 67 SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */ 68 69 SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */ 70 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ 71 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ 72 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ 73 RSV_INTR_OFFSET, /* Bit 12 Reserved */ 74 MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */ 75 MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */ 76 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ 77 78 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ 79 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ 80 USBOTG_INTR_OFFSET, /* Bit 18 ID */ 81 USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */ 82 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ 83 CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */ 84 CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */ 85 RSV_INTR_OFFSET, /* Bit 23 Reserved */ 86 }; 87 88 static int twl6032_interrupt_mapping[24] = { 89 PWR_INTR_OFFSET, /* Bit 0 PWRON */ 90 PWR_INTR_OFFSET, /* Bit 1 RPWRON */ 91 PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */ 92 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */ 93 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */ 94 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */ 95 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */ 96 PWR_INTR_OFFSET, /* Bit 7 SPDURATION */ 97 98 PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */ 99 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */ 100 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */ 101 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */ 102 MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */ 103 MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */ 104 GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */ 105 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */ 106 107 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */ 108 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */ 109 USBOTG_INTR_OFFSET, /* Bit 18 ID */ 110 USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */ 111 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */ 112 CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */ 113 CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */ 114 RSV_INTR_OFFSET, /* Bit 23 Reserved */ 115 }; 116 117 /*----------------------------------------------------------------------*/ 118 119 struct twl6030_irq { 120 unsigned int irq_base; 121 int twl_irq; 122 bool irq_wake_enabled; 123 atomic_t wakeirqs; 124 struct notifier_block pm_nb; 125 struct irq_chip irq_chip; 126 struct irq_domain *irq_domain; 127 const int *irq_mapping_tbl; 128 }; 129 130 static struct twl6030_irq *twl6030_irq; 131 132 static int twl6030_irq_pm_notifier(struct notifier_block *notifier, 133 unsigned long pm_event, void *unused) 134 { 135 int chained_wakeups; 136 struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq, 137 pm_nb); 138 139 switch (pm_event) { 140 case PM_SUSPEND_PREPARE: 141 chained_wakeups = atomic_read(&pdata->wakeirqs); 142 143 if (chained_wakeups && !pdata->irq_wake_enabled) { 144 if (enable_irq_wake(pdata->twl_irq)) 145 pr_err("twl6030 IRQ wake enable failed\n"); 146 else 147 pdata->irq_wake_enabled = true; 148 } else if (!chained_wakeups && pdata->irq_wake_enabled) { 149 disable_irq_wake(pdata->twl_irq); 150 pdata->irq_wake_enabled = false; 151 } 152 153 disable_irq(pdata->twl_irq); 154 break; 155 156 case PM_POST_SUSPEND: 157 enable_irq(pdata->twl_irq); 158 break; 159 160 default: 161 break; 162 } 163 164 return NOTIFY_DONE; 165 } 166 167 /* 168 * Threaded irq handler for the twl6030 interrupt. 169 * We query the interrupt controller in the twl6030 to determine 170 * which module is generating the interrupt request and call 171 * handle_nested_irq for that module. 172 */ 173 static irqreturn_t twl6030_irq_thread(int irq, void *data) 174 { 175 int i, ret; 176 union { 177 u8 bytes[4]; 178 __le32 int_sts; 179 } sts; 180 u32 int_sts; /* sts.int_sts converted to CPU endianness */ 181 struct twl6030_irq *pdata = data; 182 183 /* read INT_STS_A, B and C in one shot using a burst read */ 184 ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3); 185 if (ret) { 186 pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret); 187 return IRQ_HANDLED; 188 } 189 190 sts.bytes[3] = 0; /* Only 24 bits are valid*/ 191 192 /* 193 * Since VBUS status bit is not reliable for VBUS disconnect 194 * use CHARGER VBUS detection status bit instead. 195 */ 196 if (sts.bytes[2] & 0x10) 197 sts.bytes[2] |= 0x08; 198 199 int_sts = le32_to_cpu(sts.int_sts); 200 for (i = 0; int_sts; int_sts >>= 1, i++) 201 if (int_sts & 0x1) { 202 int module_irq = 203 irq_find_mapping(pdata->irq_domain, 204 pdata->irq_mapping_tbl[i]); 205 if (module_irq) 206 handle_nested_irq(module_irq); 207 else 208 pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n", 209 i); 210 pr_debug("twl6030_irq: PIH ISR %u, virq%u\n", 211 i, module_irq); 212 } 213 214 /* 215 * NOTE: 216 * Simulation confirms that documentation is wrong w.r.t the 217 * interrupt status clear operation. A single *byte* write to 218 * any one of STS_A to STS_C register results in all three 219 * STS registers being reset. Since it does not matter which 220 * value is written, all three registers are cleared on a 221 * single byte write, so we just use 0x0 to clear. 222 */ 223 ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A); 224 if (ret) 225 pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n"); 226 227 return IRQ_HANDLED; 228 } 229 230 /*----------------------------------------------------------------------*/ 231 232 static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) 233 { 234 struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d); 235 236 if (on) 237 atomic_inc(&pdata->wakeirqs); 238 else 239 atomic_dec(&pdata->wakeirqs); 240 241 return 0; 242 } 243 244 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) 245 { 246 int ret; 247 u8 unmask_value; 248 249 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value, 250 REG_INT_STS_A + offset); 251 unmask_value &= (~(bit_mask)); 252 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value, 253 REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */ 254 return ret; 255 } 256 EXPORT_SYMBOL(twl6030_interrupt_unmask); 257 258 int twl6030_interrupt_mask(u8 bit_mask, u8 offset) 259 { 260 int ret; 261 u8 mask_value; 262 263 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value, 264 REG_INT_STS_A + offset); 265 mask_value |= (bit_mask); 266 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value, 267 REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */ 268 return ret; 269 } 270 EXPORT_SYMBOL(twl6030_interrupt_mask); 271 272 int twl6030_mmc_card_detect_config(void) 273 { 274 int ret; 275 u8 reg_val = 0; 276 277 /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */ 278 twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, 279 REG_INT_MSK_LINE_B); 280 twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, 281 REG_INT_MSK_STS_B); 282 /* 283 * Initially Configuring MMC_CTRL for receiving interrupts & 284 * Card status on TWL6030 for MMC1 285 */ 286 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL); 287 if (ret < 0) { 288 pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret); 289 return ret; 290 } 291 reg_val &= ~VMMC_AUTO_OFF; 292 reg_val |= SW_FC; 293 ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL); 294 if (ret < 0) { 295 pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret); 296 return ret; 297 } 298 299 /* Configuring PullUp-PullDown register */ 300 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, 301 TWL6030_CFG_INPUT_PUPD3); 302 if (ret < 0) { 303 pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n", 304 ret); 305 return ret; 306 } 307 reg_val &= ~(MMC_PU | MMC_PD); 308 ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, 309 TWL6030_CFG_INPUT_PUPD3); 310 if (ret < 0) { 311 pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n", 312 ret); 313 return ret; 314 } 315 316 return irq_find_mapping(twl6030_irq->irq_domain, 317 MMCDETECT_INTR_OFFSET); 318 } 319 EXPORT_SYMBOL(twl6030_mmc_card_detect_config); 320 321 int twl6030_mmc_card_detect(struct device *dev, int slot) 322 { 323 int ret = -EIO; 324 u8 read_reg = 0; 325 struct platform_device *pdev = to_platform_device(dev); 326 327 if (pdev->id) { 328 /* TWL6030 provide's Card detect support for 329 * only MMC1 controller. 330 */ 331 pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__); 332 return ret; 333 } 334 /* 335 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1 336 * 0 - Card not present ,1 - Card present 337 */ 338 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg, 339 TWL6030_MMCCTRL); 340 if (ret >= 0) 341 ret = read_reg & STS_MMC; 342 return ret; 343 } 344 EXPORT_SYMBOL(twl6030_mmc_card_detect); 345 346 static int twl6030_irq_map(struct irq_domain *d, unsigned int virq, 347 irq_hw_number_t hwirq) 348 { 349 struct twl6030_irq *pdata = d->host_data; 350 351 irq_set_chip_data(virq, pdata); 352 irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq); 353 irq_set_nested_thread(virq, true); 354 irq_set_parent(virq, pdata->twl_irq); 355 irq_set_noprobe(virq); 356 357 return 0; 358 } 359 360 static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq) 361 { 362 irq_set_chip_and_handler(virq, NULL, NULL); 363 irq_set_chip_data(virq, NULL); 364 } 365 366 static const struct irq_domain_ops twl6030_irq_domain_ops = { 367 .map = twl6030_irq_map, 368 .unmap = twl6030_irq_unmap, 369 .xlate = irq_domain_xlate_onetwocell, 370 }; 371 372 static const struct of_device_id twl6030_of_match[] = { 373 {.compatible = "ti,twl6030", &twl6030_interrupt_mapping}, 374 {.compatible = "ti,twl6032", &twl6032_interrupt_mapping}, 375 { }, 376 }; 377 378 int twl6030_init_irq(struct device *dev, int irq_num) 379 { 380 struct device_node *node = dev->of_node; 381 int nr_irqs; 382 int status; 383 u8 mask[3]; 384 const struct of_device_id *of_id; 385 386 of_id = of_match_device(twl6030_of_match, dev); 387 if (!of_id || !of_id->data) { 388 dev_err(dev, "Unknown TWL device model\n"); 389 return -EINVAL; 390 } 391 392 nr_irqs = TWL6030_NR_IRQS; 393 394 twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL); 395 if (!twl6030_irq) 396 return -ENOMEM; 397 398 mask[0] = 0xFF; 399 mask[1] = 0xFF; 400 mask[2] = 0xFF; 401 402 /* mask all int lines */ 403 status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); 404 /* mask all int sts */ 405 status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); 406 /* clear INT_STS_A,B,C */ 407 status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); 408 409 if (status < 0) { 410 dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status); 411 return status; 412 } 413 414 /* 415 * install an irq handler for each of the modules; 416 * clone dummy irq_chip since PIH can't *do* anything 417 */ 418 twl6030_irq->irq_chip = dummy_irq_chip; 419 twl6030_irq->irq_chip.name = "twl6030"; 420 twl6030_irq->irq_chip.irq_set_type = NULL; 421 twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake; 422 423 twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier; 424 atomic_set(&twl6030_irq->wakeirqs, 0); 425 twl6030_irq->irq_mapping_tbl = of_id->data; 426 427 twl6030_irq->irq_domain = 428 irq_domain_add_linear(node, nr_irqs, 429 &twl6030_irq_domain_ops, twl6030_irq); 430 if (!twl6030_irq->irq_domain) { 431 dev_err(dev, "Can't add irq_domain\n"); 432 return -ENOMEM; 433 } 434 435 dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num); 436 437 /* install an irq handler to demultiplex the TWL6030 interrupt */ 438 status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread, 439 IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq); 440 if (status < 0) { 441 dev_err(dev, "could not claim irq %d: %d\n", irq_num, status); 442 goto fail_irq; 443 } 444 445 twl6030_irq->twl_irq = irq_num; 446 register_pm_notifier(&twl6030_irq->pm_nb); 447 return 0; 448 449 fail_irq: 450 irq_domain_remove(twl6030_irq->irq_domain); 451 return status; 452 } 453 454 int twl6030_exit_irq(void) 455 { 456 if (twl6030_irq && twl6030_irq->twl_irq) { 457 unregister_pm_notifier(&twl6030_irq->pm_nb); 458 free_irq(twl6030_irq->twl_irq, NULL); 459 /* 460 * TODO: IRQ domain and allocated nested IRQ descriptors 461 * should be freed somehow here. Now It can't be done, because 462 * child devices will not be deleted during removing of 463 * TWL Core driver and they will still contain allocated 464 * virt IRQs in their Resources tables. 465 * The same prevents us from using devm_request_threaded_irq() 466 * in this module. 467 */ 468 } 469 return 0; 470 } 471 472