1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM 4 * and audio CODEC devices 5 * 6 * Copyright (C) 2005-2006 Texas Instruments, Inc. 7 * 8 * Modifications to defer interrupt handling to a kernel thread: 9 * Copyright (C) 2006 MontaVista Software, Inc. 10 * 11 * Based on tlv320aic23.c: 12 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> 13 * 14 * Code cleanup and modifications to IRQ handler. 15 * by syed khasim <x0khasim@ti.com> 16 */ 17 18 #include <linux/init.h> 19 #include <linux/mutex.h> 20 #include <linux/platform_device.h> 21 #include <linux/regmap.h> 22 #include <linux/clk.h> 23 #include <linux/err.h> 24 #include <linux/device.h> 25 #include <linux/of.h> 26 #include <linux/of_irq.h> 27 #include <linux/of_platform.h> 28 #include <linux/irq.h> 29 #include <linux/irqdomain.h> 30 31 #include <linux/regulator/machine.h> 32 33 #include <linux/i2c.h> 34 35 #include <linux/mfd/core.h> 36 #include <linux/mfd/twl.h> 37 38 /* Register descriptions for audio */ 39 #include <linux/mfd/twl4030-audio.h> 40 41 #include "twl-core.h" 42 43 /* 44 * The TWL4030 "Triton 2" is one of a family of a multi-function "Power 45 * Management and System Companion Device" chips originally designed for 46 * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C, 47 * often at around 3 Mbit/sec, including for interrupt handling. 48 * 49 * This driver core provides genirq support for the interrupts emitted, 50 * by the various modules, and exports register access primitives. 51 * 52 * FIXME this driver currently requires use of the first interrupt line 53 * (and associated registers). 54 */ 55 56 #define DRIVER_NAME "twl" 57 58 /* Triton Core internal information (BEGIN) */ 59 60 /* Base Address defns for twl4030_map[] */ 61 62 /* subchip/slave 0 - USB ID */ 63 #define TWL4030_BASEADD_USB 0x0000 64 65 /* subchip/slave 1 - AUD ID */ 66 #define TWL4030_BASEADD_AUDIO_VOICE 0x0000 67 #define TWL4030_BASEADD_GPIO 0x0098 68 #define TWL4030_BASEADD_INTBR 0x0085 69 #define TWL4030_BASEADD_PIH 0x0080 70 #define TWL4030_BASEADD_TEST 0x004C 71 72 /* subchip/slave 2 - AUX ID */ 73 #define TWL4030_BASEADD_INTERRUPTS 0x00B9 74 #define TWL4030_BASEADD_LED 0x00EE 75 #define TWL4030_BASEADD_MADC 0x0000 76 #define TWL4030_BASEADD_MAIN_CHARGE 0x0074 77 #define TWL4030_BASEADD_PRECHARGE 0x00AA 78 #define TWL4030_BASEADD_PWM 0x00F8 79 #define TWL4030_BASEADD_KEYPAD 0x00D2 80 81 #define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */ 82 #define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's 83 one */ 84 85 /* subchip/slave 3 - POWER ID */ 86 #define TWL4030_BASEADD_BACKUP 0x0014 87 #define TWL4030_BASEADD_INT 0x002E 88 #define TWL4030_BASEADD_PM_MASTER 0x0036 89 90 #define TWL4030_BASEADD_PM_RECEIVER 0x005B 91 #define TWL4030_DCDC_GLOBAL_CFG 0x06 92 #define SMARTREFLEX_ENABLE BIT(3) 93 94 #define TWL4030_BASEADD_RTC 0x001C 95 #define TWL4030_BASEADD_SECURED_REG 0x0000 96 97 /* Triton Core internal information (END) */ 98 99 100 /* subchip/slave 0 0x48 - POWER */ 101 #define TWL6030_BASEADD_RTC 0x0000 102 #define TWL6030_BASEADD_SECURED_REG 0x0017 103 #define TWL6030_BASEADD_PM_MASTER 0x001F 104 #define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */ 105 #define TWL6030_BASEADD_PM_MISC 0x00E2 106 #define TWL6030_BASEADD_PM_PUPD 0x00F0 107 108 /* subchip/slave 1 0x49 - FEATURE */ 109 #define TWL6030_BASEADD_USB 0x0000 110 #define TWL6030_BASEADD_GPADC_CTRL 0x002E 111 #define TWL6030_BASEADD_AUX 0x0090 112 #define TWL6030_BASEADD_PWM 0x00BA 113 #define TWL6030_BASEADD_GASGAUGE 0x00C0 114 #define TWL6030_BASEADD_PIH 0x00D0 115 #define TWL6032_BASEADD_CHARGER 0x00DA 116 #define TWL6030_BASEADD_CHARGER 0x00E0 117 #define TWL6030_BASEADD_LED 0x00F4 118 119 /* subchip/slave 2 0x4A - DFT */ 120 #define TWL6030_BASEADD_DIEID 0x00C0 121 122 /* subchip/slave 3 0x4B - AUDIO */ 123 #define TWL6030_BASEADD_AUDIO 0x0000 124 #define TWL6030_BASEADD_RSV 0x0000 125 #define TWL6030_BASEADD_ZERO 0x0000 126 127 /* Some fields in TWL6030_PHOENIX_DEV_ON */ 128 #define TWL6030_APP_DEVOFF BIT(0) 129 #define TWL6030_CON_DEVOFF BIT(1) 130 #define TWL6030_MOD_DEVOFF BIT(2) 131 132 /* Few power values */ 133 #define R_CFG_BOOT 0x05 134 135 /* some fields in R_CFG_BOOT */ 136 #define HFCLK_FREQ_19p2_MHZ (1 << 0) 137 #define HFCLK_FREQ_26_MHZ (2 << 0) 138 #define HFCLK_FREQ_38p4_MHZ (3 << 0) 139 #define HIGH_PERF_SQ (1 << 3) 140 #define CK32K_LOWPWR_EN (1 << 7) 141 142 /*----------------------------------------------------------------------*/ 143 144 /* Structure for each TWL4030/TWL6030 Slave */ 145 struct twl_client { 146 struct i2c_client *client; 147 struct regmap *regmap; 148 }; 149 150 /* mapping the module id to slave id and base address */ 151 struct twl_mapping { 152 unsigned char sid; /* Slave ID */ 153 unsigned char base; /* base address */ 154 }; 155 156 struct twl_private { 157 bool ready; /* The core driver is ready to be used */ 158 u32 twl_idcode; /* TWL IDCODE Register value */ 159 unsigned int twl_id; 160 161 struct twl_mapping *twl_map; 162 struct twl_client *twl_modules; 163 }; 164 165 static struct twl_private *twl_priv; 166 167 static struct twl_mapping twl4030_map[] = { 168 /* 169 * NOTE: don't change this table without updating the 170 * <linux/mfd/twl.h> defines for TWL4030_MODULE_* 171 * so they continue to match the order in this table. 172 */ 173 174 /* Common IPs */ 175 { 0, TWL4030_BASEADD_USB }, 176 { 1, TWL4030_BASEADD_PIH }, 177 { 2, TWL4030_BASEADD_MAIN_CHARGE }, 178 { 3, TWL4030_BASEADD_PM_MASTER }, 179 { 3, TWL4030_BASEADD_PM_RECEIVER }, 180 181 { 3, TWL4030_BASEADD_RTC }, 182 { 2, TWL4030_BASEADD_PWM }, 183 { 2, TWL4030_BASEADD_LED }, 184 { 3, TWL4030_BASEADD_SECURED_REG }, 185 186 /* TWL4030 specific IPs */ 187 { 1, TWL4030_BASEADD_AUDIO_VOICE }, 188 { 1, TWL4030_BASEADD_GPIO }, 189 { 1, TWL4030_BASEADD_INTBR }, 190 { 1, TWL4030_BASEADD_TEST }, 191 { 2, TWL4030_BASEADD_KEYPAD }, 192 193 { 2, TWL4030_BASEADD_MADC }, 194 { 2, TWL4030_BASEADD_INTERRUPTS }, 195 { 2, TWL4030_BASEADD_PRECHARGE }, 196 { 3, TWL4030_BASEADD_BACKUP }, 197 { 3, TWL4030_BASEADD_INT }, 198 199 { 2, TWL5031_BASEADD_ACCESSORY }, 200 { 2, TWL5031_BASEADD_INTERRUPTS }, 201 }; 202 203 static const struct reg_default twl4030_49_defaults[] = { 204 /* Audio Registers */ 205 { 0x01, 0x00}, /* CODEC_MODE */ 206 { 0x02, 0x00}, /* OPTION */ 207 /* 0x03 Unused */ 208 { 0x04, 0x00}, /* MICBIAS_CTL */ 209 { 0x05, 0x00}, /* ANAMICL */ 210 { 0x06, 0x00}, /* ANAMICR */ 211 { 0x07, 0x00}, /* AVADC_CTL */ 212 { 0x08, 0x00}, /* ADCMICSEL */ 213 { 0x09, 0x00}, /* DIGMIXING */ 214 { 0x0a, 0x0f}, /* ATXL1PGA */ 215 { 0x0b, 0x0f}, /* ATXR1PGA */ 216 { 0x0c, 0x0f}, /* AVTXL2PGA */ 217 { 0x0d, 0x0f}, /* AVTXR2PGA */ 218 { 0x0e, 0x00}, /* AUDIO_IF */ 219 { 0x0f, 0x00}, /* VOICE_IF */ 220 { 0x10, 0x3f}, /* ARXR1PGA */ 221 { 0x11, 0x3f}, /* ARXL1PGA */ 222 { 0x12, 0x3f}, /* ARXR2PGA */ 223 { 0x13, 0x3f}, /* ARXL2PGA */ 224 { 0x14, 0x25}, /* VRXPGA */ 225 { 0x15, 0x00}, /* VSTPGA */ 226 { 0x16, 0x00}, /* VRX2ARXPGA */ 227 { 0x17, 0x00}, /* AVDAC_CTL */ 228 { 0x18, 0x00}, /* ARX2VTXPGA */ 229 { 0x19, 0x32}, /* ARXL1_APGA_CTL*/ 230 { 0x1a, 0x32}, /* ARXR1_APGA_CTL*/ 231 { 0x1b, 0x32}, /* ARXL2_APGA_CTL*/ 232 { 0x1c, 0x32}, /* ARXR2_APGA_CTL*/ 233 { 0x1d, 0x00}, /* ATX2ARXPGA */ 234 { 0x1e, 0x00}, /* BT_IF */ 235 { 0x1f, 0x55}, /* BTPGA */ 236 { 0x20, 0x00}, /* BTSTPGA */ 237 { 0x21, 0x00}, /* EAR_CTL */ 238 { 0x22, 0x00}, /* HS_SEL */ 239 { 0x23, 0x00}, /* HS_GAIN_SET */ 240 { 0x24, 0x00}, /* HS_POPN_SET */ 241 { 0x25, 0x00}, /* PREDL_CTL */ 242 { 0x26, 0x00}, /* PREDR_CTL */ 243 { 0x27, 0x00}, /* PRECKL_CTL */ 244 { 0x28, 0x00}, /* PRECKR_CTL */ 245 { 0x29, 0x00}, /* HFL_CTL */ 246 { 0x2a, 0x00}, /* HFR_CTL */ 247 { 0x2b, 0x05}, /* ALC_CTL */ 248 { 0x2c, 0x00}, /* ALC_SET1 */ 249 { 0x2d, 0x00}, /* ALC_SET2 */ 250 { 0x2e, 0x00}, /* BOOST_CTL */ 251 { 0x2f, 0x00}, /* SOFTVOL_CTL */ 252 { 0x30, 0x13}, /* DTMF_FREQSEL */ 253 { 0x31, 0x00}, /* DTMF_TONEXT1H */ 254 { 0x32, 0x00}, /* DTMF_TONEXT1L */ 255 { 0x33, 0x00}, /* DTMF_TONEXT2H */ 256 { 0x34, 0x00}, /* DTMF_TONEXT2L */ 257 { 0x35, 0x79}, /* DTMF_TONOFF */ 258 { 0x36, 0x11}, /* DTMF_WANONOFF */ 259 { 0x37, 0x00}, /* I2S_RX_SCRAMBLE_H */ 260 { 0x38, 0x00}, /* I2S_RX_SCRAMBLE_M */ 261 { 0x39, 0x00}, /* I2S_RX_SCRAMBLE_L */ 262 { 0x3a, 0x06}, /* APLL_CTL */ 263 { 0x3b, 0x00}, /* DTMF_CTL */ 264 { 0x3c, 0x44}, /* DTMF_PGA_CTL2 (0x3C) */ 265 { 0x3d, 0x69}, /* DTMF_PGA_CTL1 (0x3D) */ 266 { 0x3e, 0x00}, /* MISC_SET_1 */ 267 { 0x3f, 0x00}, /* PCMBTMUX */ 268 /* 0x40 - 0x42 Unused */ 269 { 0x43, 0x00}, /* RX_PATH_SEL */ 270 { 0x44, 0x32}, /* VDL_APGA_CTL */ 271 { 0x45, 0x00}, /* VIBRA_CTL */ 272 { 0x46, 0x00}, /* VIBRA_SET */ 273 { 0x47, 0x00}, /* VIBRA_PWM_SET */ 274 { 0x48, 0x00}, /* ANAMIC_GAIN */ 275 { 0x49, 0x00}, /* MISC_SET_2 */ 276 /* End of Audio Registers */ 277 }; 278 279 static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg) 280 { 281 switch (reg) { 282 case 0x00: 283 case 0x03: 284 case 0x40: 285 case 0x41: 286 case 0x42: 287 return false; 288 default: 289 return true; 290 } 291 } 292 293 static const struct regmap_range twl4030_49_volatile_ranges[] = { 294 regmap_reg_range(TWL4030_BASEADD_TEST, 0xff), 295 }; 296 297 static const struct regmap_access_table twl4030_49_volatile_table = { 298 .yes_ranges = twl4030_49_volatile_ranges, 299 .n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges), 300 }; 301 302 static const struct regmap_config twl4030_regmap_config[4] = { 303 { 304 /* Address 0x48 */ 305 .reg_bits = 8, 306 .val_bits = 8, 307 .max_register = 0xff, 308 }, 309 { 310 /* Address 0x49 */ 311 .reg_bits = 8, 312 .val_bits = 8, 313 .max_register = 0xff, 314 315 .readable_reg = twl4030_49_nop_reg, 316 .writeable_reg = twl4030_49_nop_reg, 317 318 .volatile_table = &twl4030_49_volatile_table, 319 320 .reg_defaults = twl4030_49_defaults, 321 .num_reg_defaults = ARRAY_SIZE(twl4030_49_defaults), 322 .cache_type = REGCACHE_MAPLE, 323 }, 324 { 325 /* Address 0x4a */ 326 .reg_bits = 8, 327 .val_bits = 8, 328 .max_register = 0xff, 329 }, 330 { 331 /* Address 0x4b */ 332 .reg_bits = 8, 333 .val_bits = 8, 334 .max_register = 0xff, 335 }, 336 }; 337 338 static struct twl_mapping twl6030_map[] = { 339 /* 340 * NOTE: don't change this table without updating the 341 * <linux/mfd/twl.h> defines for TWL4030_MODULE_* 342 * so they continue to match the order in this table. 343 */ 344 345 /* Common IPs */ 346 { 1, TWL6030_BASEADD_USB }, 347 { 1, TWL6030_BASEADD_PIH }, 348 { 1, TWL6030_BASEADD_CHARGER }, 349 { 0, TWL6030_BASEADD_PM_MASTER }, 350 { 0, TWL6030_BASEADD_PM_SLAVE_MISC }, 351 352 { 0, TWL6030_BASEADD_RTC }, 353 { 1, TWL6030_BASEADD_PWM }, 354 { 1, TWL6030_BASEADD_LED }, 355 { 0, TWL6030_BASEADD_SECURED_REG }, 356 357 /* TWL6030 specific IPs */ 358 { 0, TWL6030_BASEADD_ZERO }, 359 { 1, TWL6030_BASEADD_ZERO }, 360 { 2, TWL6030_BASEADD_ZERO }, 361 { 1, TWL6030_BASEADD_GPADC_CTRL }, 362 { 1, TWL6030_BASEADD_GASGAUGE }, 363 364 /* TWL6032 specific charger registers */ 365 { 1, TWL6032_BASEADD_CHARGER }, 366 }; 367 368 static const struct regmap_config twl6030_regmap_config[3] = { 369 { 370 /* Address 0x48 */ 371 .reg_bits = 8, 372 .val_bits = 8, 373 .max_register = 0xff, 374 }, 375 { 376 /* Address 0x49 */ 377 .reg_bits = 8, 378 .val_bits = 8, 379 .max_register = 0xff, 380 }, 381 { 382 /* Address 0x4a */ 383 .reg_bits = 8, 384 .val_bits = 8, 385 .max_register = 0xff, 386 }, 387 }; 388 389 /*----------------------------------------------------------------------*/ 390 391 static inline int twl_get_num_slaves(void) 392 { 393 if (twl_class_is_4030()) 394 return 4; /* TWL4030 class have four slave address */ 395 else 396 return 3; /* TWL6030 class have three slave address */ 397 } 398 399 static inline int twl_get_last_module(void) 400 { 401 if (twl_class_is_4030()) 402 return TWL4030_MODULE_LAST; 403 else 404 return TWL6030_MODULE_LAST; 405 } 406 407 /* Exported Functions */ 408 409 unsigned int twl_rev(void) 410 { 411 return twl_priv ? twl_priv->twl_id : 0; 412 } 413 EXPORT_SYMBOL(twl_rev); 414 415 /** 416 * twl_get_regmap - Get the regmap associated with the given module 417 * @mod_no: module number 418 * 419 * Returns the regmap pointer or NULL in case of failure. 420 */ 421 static struct regmap *twl_get_regmap(u8 mod_no) 422 { 423 int sid; 424 struct twl_client *twl; 425 426 if (unlikely(!twl_priv || !twl_priv->ready)) { 427 pr_err("%s: not initialized\n", DRIVER_NAME); 428 return NULL; 429 } 430 if (unlikely(mod_no >= twl_get_last_module())) { 431 pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); 432 return NULL; 433 } 434 435 sid = twl_priv->twl_map[mod_no].sid; 436 twl = &twl_priv->twl_modules[sid]; 437 438 return twl->regmap; 439 } 440 441 /** 442 * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0 443 * @mod_no: module number 444 * @value: an array of num_bytes+1 containing data to write 445 * @reg: register address (just offset will do) 446 * @num_bytes: number of bytes to transfer 447 * 448 * Returns 0 on success or else a negative error code. 449 */ 450 int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) 451 { 452 struct regmap *regmap = twl_get_regmap(mod_no); 453 int ret; 454 455 if (!regmap) 456 return -EPERM; 457 458 ret = regmap_bulk_write(regmap, twl_priv->twl_map[mod_no].base + reg, 459 value, num_bytes); 460 461 if (ret) 462 pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n", 463 DRIVER_NAME, mod_no, reg, num_bytes); 464 465 return ret; 466 } 467 EXPORT_SYMBOL(twl_i2c_write); 468 469 /** 470 * twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0 471 * @mod_no: module number 472 * @value: an array of num_bytes containing data to be read 473 * @reg: register address (just offset will do) 474 * @num_bytes: number of bytes to transfer 475 * 476 * Returns 0 on success or else a negative error code. 477 */ 478 int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) 479 { 480 struct regmap *regmap = twl_get_regmap(mod_no); 481 int ret; 482 483 if (!regmap) 484 return -EPERM; 485 486 ret = regmap_bulk_read(regmap, twl_priv->twl_map[mod_no].base + reg, 487 value, num_bytes); 488 489 if (ret) 490 pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n", 491 DRIVER_NAME, mod_no, reg, num_bytes); 492 493 return ret; 494 } 495 EXPORT_SYMBOL(twl_i2c_read); 496 497 /** 498 * twl_set_regcache_bypass - Configure the regcache bypass for the regmap associated 499 * with the module 500 * @mod_no: module number 501 * @enable: Regcache bypass state 502 * 503 * Returns 0 else failure. 504 */ 505 int twl_set_regcache_bypass(u8 mod_no, bool enable) 506 { 507 struct regmap *regmap = twl_get_regmap(mod_no); 508 509 if (!regmap) 510 return -EPERM; 511 512 regcache_cache_bypass(regmap, enable); 513 514 return 0; 515 } 516 EXPORT_SYMBOL(twl_set_regcache_bypass); 517 518 /*----------------------------------------------------------------------*/ 519 520 /** 521 * twl_read_idcode_register - API to read the IDCODE register. 522 * 523 * Unlocks the IDCODE register and read the 32 bit value. 524 */ 525 static int twl_read_idcode_register(void) 526 { 527 int err; 528 529 err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, TWL_EEPROM_R_UNLOCK, 530 REG_UNLOCK_TEST_REG); 531 if (err) { 532 pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err); 533 goto fail; 534 } 535 536 err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_priv->twl_idcode), 537 REG_IDCODE_7_0, 4); 538 if (err) { 539 pr_err("TWL4030: unable to read IDCODE -%d\n", err); 540 goto fail; 541 } 542 543 err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, 0x0, REG_UNLOCK_TEST_REG); 544 if (err) 545 pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err); 546 fail: 547 return err; 548 } 549 550 /** 551 * twl_get_type - API to get TWL Si type. 552 * 553 * Api to get the TWL Si type from IDCODE value. 554 */ 555 int twl_get_type(void) 556 { 557 return TWL_SIL_TYPE(twl_priv->twl_idcode); 558 } 559 EXPORT_SYMBOL_GPL(twl_get_type); 560 561 /** 562 * twl_get_version - API to get TWL Si version. 563 * 564 * Api to get the TWL Si version from IDCODE value. 565 */ 566 int twl_get_version(void) 567 { 568 return TWL_SIL_REV(twl_priv->twl_idcode); 569 } 570 EXPORT_SYMBOL_GPL(twl_get_version); 571 572 /** 573 * twl_get_hfclk_rate - API to get TWL external HFCLK clock rate. 574 * 575 * Api to get the TWL HFCLK rate based on BOOT_CFG register. 576 */ 577 int twl_get_hfclk_rate(void) 578 { 579 u8 ctrl; 580 int rate; 581 582 twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &ctrl, R_CFG_BOOT); 583 584 switch (ctrl & 0x3) { 585 case HFCLK_FREQ_19p2_MHZ: 586 rate = 19200000; 587 break; 588 case HFCLK_FREQ_26_MHZ: 589 rate = 26000000; 590 break; 591 case HFCLK_FREQ_38p4_MHZ: 592 rate = 38400000; 593 break; 594 default: 595 pr_err("TWL4030: HFCLK is not configured\n"); 596 rate = -EINVAL; 597 break; 598 } 599 600 return rate; 601 } 602 EXPORT_SYMBOL_GPL(twl_get_hfclk_rate); 603 604 /*----------------------------------------------------------------------*/ 605 606 /* 607 * These three functions initialize the on-chip clock framework, 608 * letting it generate the right frequencies for USB, MADC, and 609 * other purposes. 610 */ 611 static inline int protect_pm_master(void) 612 { 613 int e = 0; 614 615 e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, 616 TWL4030_PM_MASTER_PROTECT_KEY); 617 return e; 618 } 619 620 static inline int unprotect_pm_master(void) 621 { 622 int e = 0; 623 624 e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, 625 TWL4030_PM_MASTER_PROTECT_KEY); 626 e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, 627 TWL4030_PM_MASTER_PROTECT_KEY); 628 629 return e; 630 } 631 632 static void clocks_init(struct device *dev) 633 { 634 int e = 0; 635 struct clk *osc; 636 u32 rate; 637 u8 ctrl = HFCLK_FREQ_26_MHZ; 638 639 osc = clk_get(dev, "fck"); 640 if (IS_ERR(osc)) { 641 printk(KERN_WARNING "Skipping twl internal clock init and " 642 "using bootloader value (unknown osc rate)\n"); 643 return; 644 } 645 646 rate = clk_get_rate(osc); 647 clk_put(osc); 648 649 switch (rate) { 650 case 19200000: 651 ctrl = HFCLK_FREQ_19p2_MHZ; 652 break; 653 case 26000000: 654 ctrl = HFCLK_FREQ_26_MHZ; 655 break; 656 case 38400000: 657 ctrl = HFCLK_FREQ_38p4_MHZ; 658 break; 659 } 660 661 ctrl |= HIGH_PERF_SQ; 662 663 e |= unprotect_pm_master(); 664 /* effect->MADC+USB ck en */ 665 e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); 666 e |= protect_pm_master(); 667 668 if (e < 0) 669 pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e); 670 } 671 672 /*----------------------------------------------------------------------*/ 673 674 675 static void twl_remove(struct i2c_client *client) 676 { 677 unsigned i, num_slaves; 678 679 if (twl_class_is_4030()) 680 twl4030_exit_irq(); 681 else 682 twl6030_exit_irq(); 683 684 num_slaves = twl_get_num_slaves(); 685 for (i = 0; i < num_slaves; i++) { 686 struct twl_client *twl = &twl_priv->twl_modules[i]; 687 688 if (twl->client && twl->client != client) 689 i2c_unregister_device(twl->client); 690 twl->client = NULL; 691 } 692 twl_priv->ready = false; 693 } 694 695 static void twl6030_power_off(void) 696 { 697 int err; 698 u8 val; 699 700 err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, TWL6030_PHOENIX_DEV_ON); 701 if (err) 702 return; 703 704 val |= TWL6030_APP_DEVOFF | TWL6030_CON_DEVOFF | TWL6030_MOD_DEVOFF; 705 twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val, TWL6030_PHOENIX_DEV_ON); 706 } 707 708 709 static struct of_dev_auxdata twl_auxdata_lookup[] = { 710 OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL), 711 { /* sentinel */ }, 712 }; 713 714 static const struct mfd_cell twl6032_cells[] = { 715 { .name = "twl6032-clk" }, 716 }; 717 718 /* NOTE: This driver only handles a single twl4030/tps659x0 chip */ 719 static int 720 twl_probe(struct i2c_client *client) 721 { 722 const struct i2c_device_id *id = i2c_client_get_device_id(client); 723 struct device_node *node = client->dev.of_node; 724 struct platform_device *pdev; 725 const struct regmap_config *twl_regmap_config; 726 int irq_base = 0; 727 int status; 728 unsigned i, num_slaves; 729 730 if (!node) { 731 dev_err(&client->dev, "no platform data\n"); 732 return -EINVAL; 733 } 734 735 if (twl_priv) { 736 dev_dbg(&client->dev, "only one instance of %s allowed\n", 737 DRIVER_NAME); 738 return -EBUSY; 739 } 740 741 pdev = platform_device_alloc(DRIVER_NAME, -1); 742 if (!pdev) { 743 dev_err(&client->dev, "can't alloc pdev\n"); 744 return -ENOMEM; 745 } 746 747 status = platform_device_add(pdev); 748 if (status) { 749 platform_device_put(pdev); 750 return status; 751 } 752 753 if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { 754 dev_dbg(&client->dev, "can't talk I2C?\n"); 755 status = -EIO; 756 goto free; 757 } 758 759 twl_priv = devm_kzalloc(&client->dev, sizeof(struct twl_private), 760 GFP_KERNEL); 761 if (!twl_priv) { 762 status = -ENOMEM; 763 goto free; 764 } 765 766 if ((id->driver_data) & TWL6030_CLASS) { 767 twl_priv->twl_id = TWL6030_CLASS_ID; 768 twl_priv->twl_map = &twl6030_map[0]; 769 twl_regmap_config = twl6030_regmap_config; 770 } else { 771 twl_priv->twl_id = TWL4030_CLASS_ID; 772 twl_priv->twl_map = &twl4030_map[0]; 773 twl_regmap_config = twl4030_regmap_config; 774 } 775 776 num_slaves = twl_get_num_slaves(); 777 twl_priv->twl_modules = devm_kcalloc(&client->dev, 778 num_slaves, 779 sizeof(struct twl_client), 780 GFP_KERNEL); 781 if (!twl_priv->twl_modules) { 782 status = -ENOMEM; 783 goto free; 784 } 785 786 for (i = 0; i < num_slaves; i++) { 787 struct twl_client *twl = &twl_priv->twl_modules[i]; 788 789 if (i == 0) { 790 twl->client = client; 791 } else { 792 twl->client = i2c_new_dummy_device(client->adapter, 793 client->addr + i); 794 if (IS_ERR(twl->client)) { 795 dev_err(&client->dev, 796 "can't attach client %d\n", i); 797 status = PTR_ERR(twl->client); 798 goto fail; 799 } 800 } 801 802 twl->regmap = devm_regmap_init_i2c(twl->client, 803 &twl_regmap_config[i]); 804 if (IS_ERR(twl->regmap)) { 805 status = PTR_ERR(twl->regmap); 806 dev_err(&client->dev, 807 "Failed to allocate regmap %d, err: %d\n", i, 808 status); 809 goto fail; 810 } 811 } 812 813 twl_priv->ready = true; 814 815 /* setup clock framework */ 816 clocks_init(&client->dev); 817 818 /* read TWL IDCODE Register */ 819 if (twl_class_is_4030()) { 820 status = twl_read_idcode_register(); 821 WARN(status < 0, "Error: reading twl_idcode register value\n"); 822 } 823 824 /* Maybe init the T2 Interrupt subsystem */ 825 if (client->irq) { 826 if (twl_class_is_4030()) { 827 twl4030_init_chip_irq(id->name); 828 irq_base = twl4030_init_irq(&client->dev, client->irq); 829 } else { 830 irq_base = twl6030_init_irq(&client->dev, client->irq); 831 } 832 833 if (irq_base < 0) { 834 status = irq_base; 835 goto fail; 836 } 837 } 838 839 /* 840 * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. 841 * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, 842 * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. 843 * 844 * Also, always enable SmartReflex bit as that's needed for omaps to 845 * do anything over I2C4 for voltage scaling even if SmartReflex 846 * is disabled. Without the SmartReflex bit omap sys_clkreq idle 847 * signal will never trigger for retention idle. 848 */ 849 if (twl_class_is_4030()) { 850 u8 temp; 851 852 twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1); 853 temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ 854 I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); 855 twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); 856 857 twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp, 858 TWL4030_DCDC_GLOBAL_CFG); 859 temp |= SMARTREFLEX_ENABLE; 860 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp, 861 TWL4030_DCDC_GLOBAL_CFG); 862 } 863 864 if (id->driver_data == (TWL6030_CLASS | TWL6032_SUBCLASS)) { 865 status = devm_mfd_add_devices(&client->dev, 866 PLATFORM_DEVID_NONE, 867 twl6032_cells, 868 ARRAY_SIZE(twl6032_cells), 869 NULL, 0, NULL); 870 if (status < 0) 871 goto free; 872 } 873 874 if (twl_class_is_6030()) { 875 if (of_device_is_system_power_controller(node)) { 876 if (!pm_power_off) 877 pm_power_off = twl6030_power_off; 878 else 879 dev_warn(&client->dev, "Poweroff callback already assigned\n"); 880 } 881 } 882 883 status = of_platform_populate(node, NULL, twl_auxdata_lookup, 884 &client->dev); 885 886 fail: 887 if (status < 0) 888 twl_remove(client); 889 free: 890 if (status < 0) 891 platform_device_unregister(pdev); 892 893 return status; 894 } 895 896 static int __maybe_unused twl_suspend(struct device *dev) 897 { 898 struct i2c_client *client = to_i2c_client(dev); 899 900 if (client->irq) 901 disable_irq(client->irq); 902 903 return 0; 904 } 905 906 static int __maybe_unused twl_resume(struct device *dev) 907 { 908 struct i2c_client *client = to_i2c_client(dev); 909 910 if (client->irq) 911 enable_irq(client->irq); 912 913 return 0; 914 } 915 916 static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume); 917 918 static const struct i2c_device_id twl_ids[] = { 919 { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ 920 { "twl5030", 0 }, /* T2 updated */ 921 { "twl5031", TWL5031 }, /* TWL5030 updated */ 922 { "tps65950", 0 }, /* catalog version of twl5030 */ 923 { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ 924 { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ 925 { "tps65921", TPS_SUBSET }, /* fewer LDOs; no codec, no LED 926 and vibrator. Charger in USB module*/ 927 { "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */ 928 { "twl6032", TWL6030_CLASS | TWL6032_SUBCLASS }, /* "Phoenix lite" */ 929 { /* end of list */ }, 930 }; 931 932 /* One Client Driver , 4 Clients */ 933 static struct i2c_driver twl_driver = { 934 .driver.name = DRIVER_NAME, 935 .driver.pm = &twl_dev_pm_ops, 936 .id_table = twl_ids, 937 .probe = twl_probe, 938 .remove = twl_remove, 939 }; 940 builtin_i2c_driver(twl_driver); 941