1 /* 2 * ST Microelectronics MFD: stmpe's driver 3 * 4 * Copyright (C) ST-Ericsson SA 2010 5 * 6 * License Terms: GNU General Public License, version 2 7 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson 8 */ 9 10 #include <linux/err.h> 11 #include <linux/gpio.h> 12 #include <linux/export.h> 13 #include <linux/kernel.h> 14 #include <linux/interrupt.h> 15 #include <linux/irq.h> 16 #include <linux/irqdomain.h> 17 #include <linux/of.h> 18 #include <linux/of_gpio.h> 19 #include <linux/pm.h> 20 #include <linux/slab.h> 21 #include <linux/mfd/core.h> 22 #include "stmpe.h" 23 24 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks) 25 { 26 return stmpe->variant->enable(stmpe, blocks, true); 27 } 28 29 static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks) 30 { 31 return stmpe->variant->enable(stmpe, blocks, false); 32 } 33 34 static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg) 35 { 36 int ret; 37 38 ret = stmpe->ci->read_byte(stmpe, reg); 39 if (ret < 0) 40 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret); 41 42 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret); 43 44 return ret; 45 } 46 47 static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) 48 { 49 int ret; 50 51 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val); 52 53 ret = stmpe->ci->write_byte(stmpe, reg, val); 54 if (ret < 0) 55 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret); 56 57 return ret; 58 } 59 60 static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) 61 { 62 int ret; 63 64 ret = __stmpe_reg_read(stmpe, reg); 65 if (ret < 0) 66 return ret; 67 68 ret &= ~mask; 69 ret |= val; 70 71 return __stmpe_reg_write(stmpe, reg, ret); 72 } 73 74 static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, 75 u8 *values) 76 { 77 int ret; 78 79 ret = stmpe->ci->read_block(stmpe, reg, length, values); 80 if (ret < 0) 81 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret); 82 83 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret); 84 stmpe_dump_bytes("stmpe rd: ", values, length); 85 86 return ret; 87 } 88 89 static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, 90 const u8 *values) 91 { 92 int ret; 93 94 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length); 95 stmpe_dump_bytes("stmpe wr: ", values, length); 96 97 ret = stmpe->ci->write_block(stmpe, reg, length, values); 98 if (ret < 0) 99 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret); 100 101 return ret; 102 } 103 104 /** 105 * stmpe_enable - enable blocks on an STMPE device 106 * @stmpe: Device to work on 107 * @blocks: Mask of blocks (enum stmpe_block values) to enable 108 */ 109 int stmpe_enable(struct stmpe *stmpe, unsigned int blocks) 110 { 111 int ret; 112 113 mutex_lock(&stmpe->lock); 114 ret = __stmpe_enable(stmpe, blocks); 115 mutex_unlock(&stmpe->lock); 116 117 return ret; 118 } 119 EXPORT_SYMBOL_GPL(stmpe_enable); 120 121 /** 122 * stmpe_disable - disable blocks on an STMPE device 123 * @stmpe: Device to work on 124 * @blocks: Mask of blocks (enum stmpe_block values) to enable 125 */ 126 int stmpe_disable(struct stmpe *stmpe, unsigned int blocks) 127 { 128 int ret; 129 130 mutex_lock(&stmpe->lock); 131 ret = __stmpe_disable(stmpe, blocks); 132 mutex_unlock(&stmpe->lock); 133 134 return ret; 135 } 136 EXPORT_SYMBOL_GPL(stmpe_disable); 137 138 /** 139 * stmpe_reg_read() - read a single STMPE register 140 * @stmpe: Device to read from 141 * @reg: Register to read 142 */ 143 int stmpe_reg_read(struct stmpe *stmpe, u8 reg) 144 { 145 int ret; 146 147 mutex_lock(&stmpe->lock); 148 ret = __stmpe_reg_read(stmpe, reg); 149 mutex_unlock(&stmpe->lock); 150 151 return ret; 152 } 153 EXPORT_SYMBOL_GPL(stmpe_reg_read); 154 155 /** 156 * stmpe_reg_write() - write a single STMPE register 157 * @stmpe: Device to write to 158 * @reg: Register to write 159 * @val: Value to write 160 */ 161 int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val) 162 { 163 int ret; 164 165 mutex_lock(&stmpe->lock); 166 ret = __stmpe_reg_write(stmpe, reg, val); 167 mutex_unlock(&stmpe->lock); 168 169 return ret; 170 } 171 EXPORT_SYMBOL_GPL(stmpe_reg_write); 172 173 /** 174 * stmpe_set_bits() - set the value of a bitfield in a STMPE register 175 * @stmpe: Device to write to 176 * @reg: Register to write 177 * @mask: Mask of bits to set 178 * @val: Value to set 179 */ 180 int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val) 181 { 182 int ret; 183 184 mutex_lock(&stmpe->lock); 185 ret = __stmpe_set_bits(stmpe, reg, mask, val); 186 mutex_unlock(&stmpe->lock); 187 188 return ret; 189 } 190 EXPORT_SYMBOL_GPL(stmpe_set_bits); 191 192 /** 193 * stmpe_block_read() - read multiple STMPE registers 194 * @stmpe: Device to read from 195 * @reg: First register 196 * @length: Number of registers 197 * @values: Buffer to write to 198 */ 199 int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) 200 { 201 int ret; 202 203 mutex_lock(&stmpe->lock); 204 ret = __stmpe_block_read(stmpe, reg, length, values); 205 mutex_unlock(&stmpe->lock); 206 207 return ret; 208 } 209 EXPORT_SYMBOL_GPL(stmpe_block_read); 210 211 /** 212 * stmpe_block_write() - write multiple STMPE registers 213 * @stmpe: Device to write to 214 * @reg: First register 215 * @length: Number of registers 216 * @values: Values to write 217 */ 218 int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length, 219 const u8 *values) 220 { 221 int ret; 222 223 mutex_lock(&stmpe->lock); 224 ret = __stmpe_block_write(stmpe, reg, length, values); 225 mutex_unlock(&stmpe->lock); 226 227 return ret; 228 } 229 EXPORT_SYMBOL_GPL(stmpe_block_write); 230 231 /** 232 * stmpe_set_altfunc()- set the alternate function for STMPE pins 233 * @stmpe: Device to configure 234 * @pins: Bitmask of pins to affect 235 * @block: block to enable alternate functions for 236 * 237 * @pins is assumed to have a bit set for each of the bits whose alternate 238 * function is to be changed, numbered according to the GPIOXY numbers. 239 * 240 * If the GPIO module is not enabled, this function automatically enables it in 241 * order to perform the change. 242 */ 243 int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block) 244 { 245 struct stmpe_variant_info *variant = stmpe->variant; 246 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB]; 247 int af_bits = variant->af_bits; 248 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8); 249 int mask = (1 << af_bits) - 1; 250 u8 regs[numregs]; 251 int af, afperreg, ret; 252 253 if (!variant->get_altfunc) 254 return 0; 255 256 afperreg = 8 / af_bits; 257 mutex_lock(&stmpe->lock); 258 259 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO); 260 if (ret < 0) 261 goto out; 262 263 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs); 264 if (ret < 0) 265 goto out; 266 267 af = variant->get_altfunc(stmpe, block); 268 269 while (pins) { 270 int pin = __ffs(pins); 271 int regoffset = numregs - (pin / afperreg) - 1; 272 int pos = (pin % afperreg) * (8 / afperreg); 273 274 regs[regoffset] &= ~(mask << pos); 275 regs[regoffset] |= af << pos; 276 277 pins &= ~(1 << pin); 278 } 279 280 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs); 281 282 out: 283 mutex_unlock(&stmpe->lock); 284 return ret; 285 } 286 EXPORT_SYMBOL_GPL(stmpe_set_altfunc); 287 288 /* 289 * GPIO (all variants) 290 */ 291 292 static struct resource stmpe_gpio_resources[] = { 293 /* Start and end filled dynamically */ 294 { 295 .flags = IORESOURCE_IRQ, 296 }, 297 }; 298 299 static struct mfd_cell stmpe_gpio_cell = { 300 .name = "stmpe-gpio", 301 .of_compatible = "st,stmpe-gpio", 302 .resources = stmpe_gpio_resources, 303 .num_resources = ARRAY_SIZE(stmpe_gpio_resources), 304 }; 305 306 static struct mfd_cell stmpe_gpio_cell_noirq = { 307 .name = "stmpe-gpio", 308 .of_compatible = "st,stmpe-gpio", 309 /* gpio cell resources consist of an irq only so no resources here */ 310 }; 311 312 /* 313 * Keypad (1601, 2401, 2403) 314 */ 315 316 static struct resource stmpe_keypad_resources[] = { 317 { 318 .name = "KEYPAD", 319 .flags = IORESOURCE_IRQ, 320 }, 321 { 322 .name = "KEYPAD_OVER", 323 .flags = IORESOURCE_IRQ, 324 }, 325 }; 326 327 static struct mfd_cell stmpe_keypad_cell = { 328 .name = "stmpe-keypad", 329 .of_compatible = "st,stmpe-keypad", 330 .resources = stmpe_keypad_resources, 331 .num_resources = ARRAY_SIZE(stmpe_keypad_resources), 332 }; 333 334 /* 335 * STMPE801 336 */ 337 static const u8 stmpe801_regs[] = { 338 [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID, 339 [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL, 340 [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA, 341 [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN, 342 [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN, 343 [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR, 344 [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN, 345 [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA, 346 347 }; 348 349 static struct stmpe_variant_block stmpe801_blocks[] = { 350 { 351 .cell = &stmpe_gpio_cell, 352 .irq = 0, 353 .block = STMPE_BLOCK_GPIO, 354 }, 355 }; 356 357 static struct stmpe_variant_block stmpe801_blocks_noirq[] = { 358 { 359 .cell = &stmpe_gpio_cell_noirq, 360 .block = STMPE_BLOCK_GPIO, 361 }, 362 }; 363 364 static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, 365 bool enable) 366 { 367 if (blocks & STMPE_BLOCK_GPIO) 368 return 0; 369 else 370 return -EINVAL; 371 } 372 373 static struct stmpe_variant_info stmpe801 = { 374 .name = "stmpe801", 375 .id_val = STMPE801_ID, 376 .id_mask = 0xffff, 377 .num_gpios = 8, 378 .regs = stmpe801_regs, 379 .blocks = stmpe801_blocks, 380 .num_blocks = ARRAY_SIZE(stmpe801_blocks), 381 .num_irqs = STMPE801_NR_INTERNAL_IRQS, 382 .enable = stmpe801_enable, 383 }; 384 385 static struct stmpe_variant_info stmpe801_noirq = { 386 .name = "stmpe801", 387 .id_val = STMPE801_ID, 388 .id_mask = 0xffff, 389 .num_gpios = 8, 390 .regs = stmpe801_regs, 391 .blocks = stmpe801_blocks_noirq, 392 .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq), 393 .enable = stmpe801_enable, 394 }; 395 396 /* 397 * Touchscreen (STMPE811 or STMPE610) 398 */ 399 400 static struct resource stmpe_ts_resources[] = { 401 { 402 .name = "TOUCH_DET", 403 .flags = IORESOURCE_IRQ, 404 }, 405 { 406 .name = "FIFO_TH", 407 .flags = IORESOURCE_IRQ, 408 }, 409 }; 410 411 static struct mfd_cell stmpe_ts_cell = { 412 .name = "stmpe-ts", 413 .of_compatible = "st,stmpe-ts", 414 .resources = stmpe_ts_resources, 415 .num_resources = ARRAY_SIZE(stmpe_ts_resources), 416 }; 417 418 /* 419 * STMPE811 or STMPE610 420 */ 421 422 static const u8 stmpe811_regs[] = { 423 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID, 424 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL, 425 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN, 426 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA, 427 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA, 428 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN, 429 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN, 430 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR, 431 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE, 432 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE, 433 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF, 434 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN, 435 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA, 436 [STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED, 437 }; 438 439 static struct stmpe_variant_block stmpe811_blocks[] = { 440 { 441 .cell = &stmpe_gpio_cell, 442 .irq = STMPE811_IRQ_GPIOC, 443 .block = STMPE_BLOCK_GPIO, 444 }, 445 { 446 .cell = &stmpe_ts_cell, 447 .irq = STMPE811_IRQ_TOUCH_DET, 448 .block = STMPE_BLOCK_TOUCHSCREEN, 449 }, 450 }; 451 452 static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, 453 bool enable) 454 { 455 unsigned int mask = 0; 456 457 if (blocks & STMPE_BLOCK_GPIO) 458 mask |= STMPE811_SYS_CTRL2_GPIO_OFF; 459 460 if (blocks & STMPE_BLOCK_ADC) 461 mask |= STMPE811_SYS_CTRL2_ADC_OFF; 462 463 if (blocks & STMPE_BLOCK_TOUCHSCREEN) 464 mask |= STMPE811_SYS_CTRL2_TSC_OFF; 465 466 return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask, 467 enable ? 0 : mask); 468 } 469 470 static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) 471 { 472 /* 0 for touchscreen, 1 for GPIO */ 473 return block != STMPE_BLOCK_TOUCHSCREEN; 474 } 475 476 static struct stmpe_variant_info stmpe811 = { 477 .name = "stmpe811", 478 .id_val = 0x0811, 479 .id_mask = 0xffff, 480 .num_gpios = 8, 481 .af_bits = 1, 482 .regs = stmpe811_regs, 483 .blocks = stmpe811_blocks, 484 .num_blocks = ARRAY_SIZE(stmpe811_blocks), 485 .num_irqs = STMPE811_NR_INTERNAL_IRQS, 486 .enable = stmpe811_enable, 487 .get_altfunc = stmpe811_get_altfunc, 488 }; 489 490 /* Similar to 811, except number of gpios */ 491 static struct stmpe_variant_info stmpe610 = { 492 .name = "stmpe610", 493 .id_val = 0x0811, 494 .id_mask = 0xffff, 495 .num_gpios = 6, 496 .af_bits = 1, 497 .regs = stmpe811_regs, 498 .blocks = stmpe811_blocks, 499 .num_blocks = ARRAY_SIZE(stmpe811_blocks), 500 .num_irqs = STMPE811_NR_INTERNAL_IRQS, 501 .enable = stmpe811_enable, 502 .get_altfunc = stmpe811_get_altfunc, 503 }; 504 505 /* 506 * STMPE1601 507 */ 508 509 static const u8 stmpe1601_regs[] = { 510 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID, 511 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB, 512 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB, 513 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB, 514 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB, 515 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB, 516 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB, 517 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, 518 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, 519 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, 520 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, 521 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, 522 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, 523 [STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB, 524 }; 525 526 static struct stmpe_variant_block stmpe1601_blocks[] = { 527 { 528 .cell = &stmpe_gpio_cell, 529 .irq = STMPE1601_IRQ_GPIOC, 530 .block = STMPE_BLOCK_GPIO, 531 }, 532 { 533 .cell = &stmpe_keypad_cell, 534 .irq = STMPE1601_IRQ_KEYPAD, 535 .block = STMPE_BLOCK_KEYPAD, 536 }, 537 }; 538 539 /* supported autosleep timeout delay (in msecs) */ 540 static const int stmpe_autosleep_delay[] = { 541 4, 16, 32, 64, 128, 256, 512, 1024, 542 }; 543 544 static int stmpe_round_timeout(int timeout) 545 { 546 int i; 547 548 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) { 549 if (stmpe_autosleep_delay[i] >= timeout) 550 return i; 551 } 552 553 /* 554 * requests for delays longer than supported should not return the 555 * longest supported delay 556 */ 557 return -EINVAL; 558 } 559 560 static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout) 561 { 562 int ret; 563 564 if (!stmpe->variant->enable_autosleep) 565 return -ENOSYS; 566 567 mutex_lock(&stmpe->lock); 568 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout); 569 mutex_unlock(&stmpe->lock); 570 571 return ret; 572 } 573 574 /* 575 * Both stmpe 1601/2403 support same layout for autosleep 576 */ 577 static int stmpe1601_autosleep(struct stmpe *stmpe, 578 int autosleep_timeout) 579 { 580 int ret, timeout; 581 582 /* choose the best available timeout */ 583 timeout = stmpe_round_timeout(autosleep_timeout); 584 if (timeout < 0) { 585 dev_err(stmpe->dev, "invalid timeout\n"); 586 return timeout; 587 } 588 589 ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2, 590 STMPE1601_AUTOSLEEP_TIMEOUT_MASK, 591 timeout); 592 if (ret < 0) 593 return ret; 594 595 return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2, 596 STPME1601_AUTOSLEEP_ENABLE, 597 STPME1601_AUTOSLEEP_ENABLE); 598 } 599 600 static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks, 601 bool enable) 602 { 603 unsigned int mask = 0; 604 605 if (blocks & STMPE_BLOCK_GPIO) 606 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO; 607 608 if (blocks & STMPE_BLOCK_KEYPAD) 609 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC; 610 611 return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask, 612 enable ? mask : 0); 613 } 614 615 static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) 616 { 617 switch (block) { 618 case STMPE_BLOCK_PWM: 619 return 2; 620 621 case STMPE_BLOCK_KEYPAD: 622 return 1; 623 624 case STMPE_BLOCK_GPIO: 625 default: 626 return 0; 627 } 628 } 629 630 static struct stmpe_variant_info stmpe1601 = { 631 .name = "stmpe1601", 632 .id_val = 0x0210, 633 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */ 634 .num_gpios = 16, 635 .af_bits = 2, 636 .regs = stmpe1601_regs, 637 .blocks = stmpe1601_blocks, 638 .num_blocks = ARRAY_SIZE(stmpe1601_blocks), 639 .num_irqs = STMPE1601_NR_INTERNAL_IRQS, 640 .enable = stmpe1601_enable, 641 .get_altfunc = stmpe1601_get_altfunc, 642 .enable_autosleep = stmpe1601_autosleep, 643 }; 644 645 /* 646 * STMPE24XX 647 */ 648 649 static const u8 stmpe24xx_regs[] = { 650 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID, 651 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB, 652 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB, 653 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB, 654 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB, 655 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB, 656 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB, 657 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, 658 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, 659 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, 660 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, 661 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, 662 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, 663 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB, 664 }; 665 666 static struct stmpe_variant_block stmpe24xx_blocks[] = { 667 { 668 .cell = &stmpe_gpio_cell, 669 .irq = STMPE24XX_IRQ_GPIOC, 670 .block = STMPE_BLOCK_GPIO, 671 }, 672 { 673 .cell = &stmpe_keypad_cell, 674 .irq = STMPE24XX_IRQ_KEYPAD, 675 .block = STMPE_BLOCK_KEYPAD, 676 }, 677 }; 678 679 static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks, 680 bool enable) 681 { 682 unsigned int mask = 0; 683 684 if (blocks & STMPE_BLOCK_GPIO) 685 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO; 686 687 if (blocks & STMPE_BLOCK_KEYPAD) 688 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC; 689 690 return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask, 691 enable ? mask : 0); 692 } 693 694 static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) 695 { 696 switch (block) { 697 case STMPE_BLOCK_ROTATOR: 698 return 2; 699 700 case STMPE_BLOCK_KEYPAD: 701 return 1; 702 703 case STMPE_BLOCK_GPIO: 704 default: 705 return 0; 706 } 707 } 708 709 static struct stmpe_variant_info stmpe2401 = { 710 .name = "stmpe2401", 711 .id_val = 0x0101, 712 .id_mask = 0xffff, 713 .num_gpios = 24, 714 .af_bits = 2, 715 .regs = stmpe24xx_regs, 716 .blocks = stmpe24xx_blocks, 717 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), 718 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, 719 .enable = stmpe24xx_enable, 720 .get_altfunc = stmpe24xx_get_altfunc, 721 }; 722 723 static struct stmpe_variant_info stmpe2403 = { 724 .name = "stmpe2403", 725 .id_val = 0x0120, 726 .id_mask = 0xffff, 727 .num_gpios = 24, 728 .af_bits = 2, 729 .regs = stmpe24xx_regs, 730 .blocks = stmpe24xx_blocks, 731 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks), 732 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS, 733 .enable = stmpe24xx_enable, 734 .get_altfunc = stmpe24xx_get_altfunc, 735 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ 736 }; 737 738 static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { 739 [STMPE610] = &stmpe610, 740 [STMPE801] = &stmpe801, 741 [STMPE811] = &stmpe811, 742 [STMPE1601] = &stmpe1601, 743 [STMPE2401] = &stmpe2401, 744 [STMPE2403] = &stmpe2403, 745 }; 746 747 /* 748 * These devices can be connected in a 'no-irq' configuration - the irq pin 749 * is not used and the device cannot interrupt the CPU. Here we only list 750 * devices which support this configuration - the driver will fail probing 751 * for any devices not listed here which are configured in this way. 752 */ 753 static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = { 754 [STMPE801] = &stmpe801_noirq, 755 }; 756 757 static irqreturn_t stmpe_irq(int irq, void *data) 758 { 759 struct stmpe *stmpe = data; 760 struct stmpe_variant_info *variant = stmpe->variant; 761 int num = DIV_ROUND_UP(variant->num_irqs, 8); 762 u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB]; 763 u8 isr[num]; 764 int ret; 765 int i; 766 767 if (variant->id_val == STMPE801_ID) { 768 int base = irq_create_mapping(stmpe->domain, 0); 769 770 handle_nested_irq(base); 771 return IRQ_HANDLED; 772 } 773 774 ret = stmpe_block_read(stmpe, israddr, num, isr); 775 if (ret < 0) 776 return IRQ_NONE; 777 778 for (i = 0; i < num; i++) { 779 int bank = num - i - 1; 780 u8 status = isr[i]; 781 u8 clear; 782 783 status &= stmpe->ier[bank]; 784 if (!status) 785 continue; 786 787 clear = status; 788 while (status) { 789 int bit = __ffs(status); 790 int line = bank * 8 + bit; 791 int nestedirq = irq_create_mapping(stmpe->domain, line); 792 793 handle_nested_irq(nestedirq); 794 status &= ~(1 << bit); 795 } 796 797 stmpe_reg_write(stmpe, israddr + i, clear); 798 } 799 800 return IRQ_HANDLED; 801 } 802 803 static void stmpe_irq_lock(struct irq_data *data) 804 { 805 struct stmpe *stmpe = irq_data_get_irq_chip_data(data); 806 807 mutex_lock(&stmpe->irq_lock); 808 } 809 810 static void stmpe_irq_sync_unlock(struct irq_data *data) 811 { 812 struct stmpe *stmpe = irq_data_get_irq_chip_data(data); 813 struct stmpe_variant_info *variant = stmpe->variant; 814 int num = DIV_ROUND_UP(variant->num_irqs, 8); 815 int i; 816 817 for (i = 0; i < num; i++) { 818 u8 new = stmpe->ier[i]; 819 u8 old = stmpe->oldier[i]; 820 821 if (new == old) 822 continue; 823 824 stmpe->oldier[i] = new; 825 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new); 826 } 827 828 mutex_unlock(&stmpe->irq_lock); 829 } 830 831 static void stmpe_irq_mask(struct irq_data *data) 832 { 833 struct stmpe *stmpe = irq_data_get_irq_chip_data(data); 834 int offset = data->hwirq; 835 int regoffset = offset / 8; 836 int mask = 1 << (offset % 8); 837 838 stmpe->ier[regoffset] &= ~mask; 839 } 840 841 static void stmpe_irq_unmask(struct irq_data *data) 842 { 843 struct stmpe *stmpe = irq_data_get_irq_chip_data(data); 844 int offset = data->hwirq; 845 int regoffset = offset / 8; 846 int mask = 1 << (offset % 8); 847 848 stmpe->ier[regoffset] |= mask; 849 } 850 851 static struct irq_chip stmpe_irq_chip = { 852 .name = "stmpe", 853 .irq_bus_lock = stmpe_irq_lock, 854 .irq_bus_sync_unlock = stmpe_irq_sync_unlock, 855 .irq_mask = stmpe_irq_mask, 856 .irq_unmask = stmpe_irq_unmask, 857 }; 858 859 static int stmpe_irq_map(struct irq_domain *d, unsigned int virq, 860 irq_hw_number_t hwirq) 861 { 862 struct stmpe *stmpe = d->host_data; 863 struct irq_chip *chip = NULL; 864 865 if (stmpe->variant->id_val != STMPE801_ID) 866 chip = &stmpe_irq_chip; 867 868 irq_set_chip_data(virq, stmpe); 869 irq_set_chip_and_handler(virq, chip, handle_edge_irq); 870 irq_set_nested_thread(virq, 1); 871 #ifdef CONFIG_ARM 872 set_irq_flags(virq, IRQF_VALID); 873 #else 874 irq_set_noprobe(virq); 875 #endif 876 877 return 0; 878 } 879 880 static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq) 881 { 882 #ifdef CONFIG_ARM 883 set_irq_flags(virq, 0); 884 #endif 885 irq_set_chip_and_handler(virq, NULL, NULL); 886 irq_set_chip_data(virq, NULL); 887 } 888 889 static struct irq_domain_ops stmpe_irq_ops = { 890 .map = stmpe_irq_map, 891 .unmap = stmpe_irq_unmap, 892 .xlate = irq_domain_xlate_twocell, 893 }; 894 895 static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np) 896 { 897 int base = 0; 898 int num_irqs = stmpe->variant->num_irqs; 899 900 if (!np) 901 base = stmpe->irq_base; 902 903 stmpe->domain = irq_domain_add_simple(np, num_irqs, base, 904 &stmpe_irq_ops, stmpe); 905 if (!stmpe->domain) { 906 dev_err(stmpe->dev, "Failed to create irqdomain\n"); 907 return -ENOSYS; 908 } 909 910 return 0; 911 } 912 913 static int stmpe_chip_init(struct stmpe *stmpe) 914 { 915 unsigned int irq_trigger = stmpe->pdata->irq_trigger; 916 int autosleep_timeout = stmpe->pdata->autosleep_timeout; 917 struct stmpe_variant_info *variant = stmpe->variant; 918 u8 icr = 0; 919 unsigned int id; 920 u8 data[2]; 921 int ret; 922 923 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID], 924 ARRAY_SIZE(data), data); 925 if (ret < 0) 926 return ret; 927 928 id = (data[0] << 8) | data[1]; 929 if ((id & variant->id_mask) != variant->id_val) { 930 dev_err(stmpe->dev, "unknown chip id: %#x\n", id); 931 return -EINVAL; 932 } 933 934 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id); 935 936 /* Disable all modules -- subdrivers should enable what they need. */ 937 ret = stmpe_disable(stmpe, ~0); 938 if (ret) 939 return ret; 940 941 if (stmpe->irq >= 0) { 942 if (id == STMPE801_ID) 943 icr = STMPE801_REG_SYS_CTRL_INT_EN; 944 else 945 icr = STMPE_ICR_LSB_GIM; 946 947 /* STMPE801 doesn't support Edge interrupts */ 948 if (id != STMPE801_ID) { 949 if (irq_trigger == IRQF_TRIGGER_FALLING || 950 irq_trigger == IRQF_TRIGGER_RISING) 951 icr |= STMPE_ICR_LSB_EDGE; 952 } 953 954 if (irq_trigger == IRQF_TRIGGER_RISING || 955 irq_trigger == IRQF_TRIGGER_HIGH) { 956 if (id == STMPE801_ID) 957 icr |= STMPE801_REG_SYS_CTRL_INT_HI; 958 else 959 icr |= STMPE_ICR_LSB_HIGH; 960 } 961 } 962 963 if (stmpe->pdata->autosleep) { 964 ret = stmpe_autosleep(stmpe, autosleep_timeout); 965 if (ret) 966 return ret; 967 } 968 969 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr); 970 } 971 972 static int stmpe_add_device(struct stmpe *stmpe, struct mfd_cell *cell) 973 { 974 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, 975 NULL, stmpe->irq_base, stmpe->domain); 976 } 977 978 static int stmpe_devices_init(struct stmpe *stmpe) 979 { 980 struct stmpe_variant_info *variant = stmpe->variant; 981 unsigned int platform_blocks = stmpe->pdata->blocks; 982 int ret = -EINVAL; 983 int i, j; 984 985 for (i = 0; i < variant->num_blocks; i++) { 986 struct stmpe_variant_block *block = &variant->blocks[i]; 987 988 if (!(platform_blocks & block->block)) 989 continue; 990 991 for (j = 0; j < block->cell->num_resources; j++) { 992 struct resource *res = 993 (struct resource *) &block->cell->resources[j]; 994 995 /* Dynamically fill in a variant's IRQ. */ 996 if (res->flags & IORESOURCE_IRQ) 997 res->start = res->end = block->irq + j; 998 } 999 1000 platform_blocks &= ~block->block; 1001 ret = stmpe_add_device(stmpe, block->cell); 1002 if (ret) 1003 return ret; 1004 } 1005 1006 if (platform_blocks) 1007 dev_warn(stmpe->dev, 1008 "platform wants blocks (%#x) not present on variant", 1009 platform_blocks); 1010 1011 return ret; 1012 } 1013 1014 void stmpe_of_probe(struct stmpe_platform_data *pdata, struct device_node *np) 1015 { 1016 struct device_node *child; 1017 1018 pdata->id = -1; 1019 pdata->irq_trigger = IRQF_TRIGGER_NONE; 1020 1021 of_property_read_u32(np, "st,autosleep-timeout", 1022 &pdata->autosleep_timeout); 1023 1024 pdata->autosleep = (pdata->autosleep_timeout) ? true : false; 1025 1026 for_each_child_of_node(np, child) { 1027 if (!strcmp(child->name, "stmpe_gpio")) { 1028 pdata->blocks |= STMPE_BLOCK_GPIO; 1029 } else if (!strcmp(child->name, "stmpe_keypad")) { 1030 pdata->blocks |= STMPE_BLOCK_KEYPAD; 1031 } else if (!strcmp(child->name, "stmpe_touchscreen")) { 1032 pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN; 1033 } else if (!strcmp(child->name, "stmpe_adc")) { 1034 pdata->blocks |= STMPE_BLOCK_ADC; 1035 } else if (!strcmp(child->name, "stmpe_pwm")) { 1036 pdata->blocks |= STMPE_BLOCK_PWM; 1037 } else if (!strcmp(child->name, "stmpe_rotator")) { 1038 pdata->blocks |= STMPE_BLOCK_ROTATOR; 1039 } 1040 } 1041 } 1042 1043 /* Called from client specific probe routines */ 1044 int stmpe_probe(struct stmpe_client_info *ci, int partnum) 1045 { 1046 struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev); 1047 struct device_node *np = ci->dev->of_node; 1048 struct stmpe *stmpe; 1049 int ret; 1050 1051 if (!pdata) { 1052 if (!np) 1053 return -EINVAL; 1054 1055 pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); 1056 if (!pdata) 1057 return -ENOMEM; 1058 1059 stmpe_of_probe(pdata, np); 1060 } 1061 1062 stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL); 1063 if (!stmpe) 1064 return -ENOMEM; 1065 1066 mutex_init(&stmpe->irq_lock); 1067 mutex_init(&stmpe->lock); 1068 1069 stmpe->dev = ci->dev; 1070 stmpe->client = ci->client; 1071 stmpe->pdata = pdata; 1072 stmpe->irq_base = pdata->irq_base; 1073 stmpe->ci = ci; 1074 stmpe->partnum = partnum; 1075 stmpe->variant = stmpe_variant_info[partnum]; 1076 stmpe->regs = stmpe->variant->regs; 1077 stmpe->num_gpios = stmpe->variant->num_gpios; 1078 dev_set_drvdata(stmpe->dev, stmpe); 1079 1080 if (ci->init) 1081 ci->init(stmpe); 1082 1083 if (pdata->irq_over_gpio) { 1084 ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio, 1085 GPIOF_DIR_IN, "stmpe"); 1086 if (ret) { 1087 dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", 1088 ret); 1089 return ret; 1090 } 1091 1092 stmpe->irq = gpio_to_irq(pdata->irq_gpio); 1093 } else { 1094 stmpe->irq = ci->irq; 1095 } 1096 1097 if (stmpe->irq < 0) { 1098 /* use alternate variant info for no-irq mode, if supported */ 1099 dev_info(stmpe->dev, 1100 "%s configured in no-irq mode by platform data\n", 1101 stmpe->variant->name); 1102 if (!stmpe_noirq_variant_info[stmpe->partnum]) { 1103 dev_err(stmpe->dev, 1104 "%s does not support no-irq mode!\n", 1105 stmpe->variant->name); 1106 return -ENODEV; 1107 } 1108 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum]; 1109 } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) { 1110 pdata->irq_trigger = 1111 irqd_get_trigger_type(irq_get_irq_data(stmpe->irq)); 1112 } 1113 1114 ret = stmpe_chip_init(stmpe); 1115 if (ret) 1116 return ret; 1117 1118 if (stmpe->irq >= 0) { 1119 ret = stmpe_irq_init(stmpe, np); 1120 if (ret) 1121 return ret; 1122 1123 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL, 1124 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT, 1125 "stmpe", stmpe); 1126 if (ret) { 1127 dev_err(stmpe->dev, "failed to request IRQ: %d\n", 1128 ret); 1129 return ret; 1130 } 1131 } 1132 1133 ret = stmpe_devices_init(stmpe); 1134 if (!ret) 1135 return 0; 1136 1137 dev_err(stmpe->dev, "failed to add children\n"); 1138 mfd_remove_devices(stmpe->dev); 1139 1140 return ret; 1141 } 1142 1143 int stmpe_remove(struct stmpe *stmpe) 1144 { 1145 mfd_remove_devices(stmpe->dev); 1146 1147 return 0; 1148 } 1149 1150 #ifdef CONFIG_PM 1151 static int stmpe_suspend(struct device *dev) 1152 { 1153 struct stmpe *stmpe = dev_get_drvdata(dev); 1154 1155 if (stmpe->irq >= 0 && device_may_wakeup(dev)) 1156 enable_irq_wake(stmpe->irq); 1157 1158 return 0; 1159 } 1160 1161 static int stmpe_resume(struct device *dev) 1162 { 1163 struct stmpe *stmpe = dev_get_drvdata(dev); 1164 1165 if (stmpe->irq >= 0 && device_may_wakeup(dev)) 1166 disable_irq_wake(stmpe->irq); 1167 1168 return 0; 1169 } 1170 1171 const struct dev_pm_ops stmpe_dev_pm_ops = { 1172 .suspend = stmpe_suspend, 1173 .resume = stmpe_resume, 1174 }; 1175 #endif 1176