1 /** 2 * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI 3 * 4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com 5 * Author: Keshava Munegowda <keshava_mgowda@ti.com> 6 * 7 * This program is free software: you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 of 9 * the License as published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program. If not, see <http://www.gnu.org/licenses/>. 18 */ 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/types.h> 22 #include <linux/slab.h> 23 #include <linux/spinlock.h> 24 #include <linux/platform_device.h> 25 #include <linux/clk.h> 26 #include <linux/io.h> 27 #include <linux/err.h> 28 #include <linux/pm_runtime.h> 29 #include <linux/platform_data/usb-omap.h> 30 31 #define USBTLL_DRIVER_NAME "usbhs_tll" 32 33 /* TLL Register Set */ 34 #define OMAP_USBTLL_REVISION (0x00) 35 #define OMAP_USBTLL_SYSCONFIG (0x10) 36 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) 37 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) 38 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) 39 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) 40 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) 41 42 #define OMAP_USBTLL_SYSSTATUS (0x14) 43 #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) 44 45 #define OMAP_USBTLL_IRQSTATUS (0x18) 46 #define OMAP_USBTLL_IRQENABLE (0x1C) 47 48 #define OMAP_TLL_SHARED_CONF (0x30) 49 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) 50 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) 51 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) 52 #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) 53 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) 54 55 #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) 56 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 57 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) 58 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) 59 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) 60 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) 61 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) 62 #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) 63 64 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 65 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 66 #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 67 #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 68 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 69 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 70 #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 71 #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 72 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA 73 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB 74 75 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) 76 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) 77 #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) 78 #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) 79 #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) 80 #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) 81 #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) 82 #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) 83 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) 84 85 #define OMAP_REV2_TLL_CHANNEL_COUNT 2 86 #define OMAP_TLL_CHANNEL_COUNT 3 87 #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) 88 #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) 89 #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) 90 91 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */ 92 #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */ 93 #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */ 94 #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */ 95 96 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) 97 98 struct usbtll_omap { 99 struct clk *usbtll_p1_fck; 100 struct clk *usbtll_p2_fck; 101 struct usbtll_omap_platform_data platdata; 102 /* secure the register updates */ 103 spinlock_t lock; 104 }; 105 106 /*-------------------------------------------------------------------------*/ 107 108 const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; 109 struct platform_device *tll_pdev; 110 111 /*-------------------------------------------------------------------------*/ 112 113 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val) 114 { 115 __raw_writel(val, base + reg); 116 } 117 118 static inline u32 usbtll_read(void __iomem *base, u32 reg) 119 { 120 return __raw_readl(base + reg); 121 } 122 123 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val) 124 { 125 __raw_writeb(val, base + reg); 126 } 127 128 static inline u8 usbtll_readb(void __iomem *base, u8 reg) 129 { 130 return __raw_readb(base + reg); 131 } 132 133 /*-------------------------------------------------------------------------*/ 134 135 static bool is_ohci_port(enum usbhs_omap_port_mode pmode) 136 { 137 switch (pmode) { 138 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 139 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 140 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 141 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 142 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 143 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 144 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 145 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 146 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 147 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 148 return true; 149 150 default: 151 return false; 152 } 153 } 154 155 /* 156 * convert the port-mode enum to a value we can use in the FSLSMODE 157 * field of USBTLL_CHANNEL_CONF 158 */ 159 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) 160 { 161 switch (mode) { 162 case OMAP_USBHS_PORT_MODE_UNUSED: 163 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 164 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; 165 166 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 167 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; 168 169 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 170 return OMAP_TLL_FSLSMODE_3PIN_PHY; 171 172 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 173 return OMAP_TLL_FSLSMODE_4PIN_PHY; 174 175 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 176 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; 177 178 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 179 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; 180 181 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 182 return OMAP_TLL_FSLSMODE_3PIN_TLL; 183 184 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 185 return OMAP_TLL_FSLSMODE_4PIN_TLL; 186 187 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 188 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; 189 190 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 191 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; 192 default: 193 pr_warn("Invalid port mode, using default\n"); 194 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; 195 } 196 } 197 198 /** 199 * usbtll_omap_probe - initialize TI-based HCDs 200 * 201 * Allocates basic resources for this USB host controller. 202 */ 203 static int usbtll_omap_probe(struct platform_device *pdev) 204 { 205 struct device *dev = &pdev->dev; 206 struct usbtll_omap_platform_data *pdata = dev->platform_data; 207 void __iomem *base; 208 struct resource *res; 209 struct usbtll_omap *tll; 210 unsigned reg; 211 unsigned long flags; 212 int ret = 0; 213 int i, ver, count; 214 215 dev_dbg(dev, "starting TI HSUSB TLL Controller\n"); 216 217 tll = kzalloc(sizeof(struct usbtll_omap), GFP_KERNEL); 218 if (!tll) { 219 dev_err(dev, "Memory allocation failed\n"); 220 ret = -ENOMEM; 221 goto end; 222 } 223 224 spin_lock_init(&tll->lock); 225 226 for (i = 0; i < OMAP3_HS_USB_PORTS; i++) 227 tll->platdata.port_mode[i] = pdata->port_mode[i]; 228 229 tll->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); 230 if (IS_ERR(tll->usbtll_p1_fck)) { 231 ret = PTR_ERR(tll->usbtll_p1_fck); 232 dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); 233 goto err_tll; 234 } 235 236 tll->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); 237 if (IS_ERR(tll->usbtll_p2_fck)) { 238 ret = PTR_ERR(tll->usbtll_p2_fck); 239 dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); 240 goto err_usbtll_p1_fck; 241 } 242 243 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 244 if (!res) { 245 dev_err(dev, "usb tll get resource failed\n"); 246 ret = -ENODEV; 247 goto err_usbtll_p2_fck; 248 } 249 250 base = ioremap(res->start, resource_size(res)); 251 if (!base) { 252 dev_err(dev, "TLL ioremap failed\n"); 253 ret = -ENOMEM; 254 goto err_usbtll_p2_fck; 255 } 256 257 platform_set_drvdata(pdev, tll); 258 pm_runtime_enable(dev); 259 pm_runtime_get_sync(dev); 260 261 spin_lock_irqsave(&tll->lock, flags); 262 263 ver = usbtll_read(base, OMAP_USBTLL_REVISION); 264 switch (ver) { 265 case OMAP_USBTLL_REV1: 266 case OMAP_USBTLL_REV2: 267 count = OMAP_TLL_CHANNEL_COUNT; 268 break; 269 case OMAP_USBTLL_REV3: 270 count = OMAP_REV2_TLL_CHANNEL_COUNT; 271 break; 272 default: 273 dev_err(dev, "TLL version failed\n"); 274 ret = -ENODEV; 275 goto err_ioremap; 276 } 277 278 if (is_ehci_tll_mode(pdata->port_mode[0]) || 279 is_ehci_tll_mode(pdata->port_mode[1]) || 280 is_ehci_tll_mode(pdata->port_mode[2]) || 281 is_ohci_port(pdata->port_mode[0]) || 282 is_ohci_port(pdata->port_mode[1]) || 283 is_ohci_port(pdata->port_mode[2])) { 284 285 /* Program Common TLL register */ 286 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF); 287 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON 288 | OMAP_TLL_SHARED_CONF_USB_DIVRATION); 289 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; 290 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; 291 292 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg); 293 294 /* Enable channels now */ 295 for (i = 0; i < count; i++) { 296 reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i)); 297 298 if (is_ohci_port(pdata->port_mode[i])) { 299 reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) 300 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; 301 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; 302 } else if (pdata->port_mode[i] == 303 OMAP_EHCI_PORT_MODE_TLL) { 304 /* 305 * Disable AutoIdle, BitStuffing 306 * and use SDR Mode 307 */ 308 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE 309 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF 310 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); 311 } else { 312 continue; 313 } 314 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; 315 usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg); 316 317 usbtll_writeb(base, 318 OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 319 0xbe); 320 } 321 } 322 323 err_ioremap: 324 spin_unlock_irqrestore(&tll->lock, flags); 325 iounmap(base); 326 pm_runtime_put_sync(dev); 327 tll_pdev = pdev; 328 if (!ret) 329 goto end; 330 pm_runtime_disable(dev); 331 332 err_usbtll_p2_fck: 333 clk_put(tll->usbtll_p2_fck); 334 335 err_usbtll_p1_fck: 336 clk_put(tll->usbtll_p1_fck); 337 338 err_tll: 339 kfree(tll); 340 341 end: 342 return ret; 343 } 344 345 /** 346 * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs 347 * @pdev: USB Host Controller being removed 348 * 349 * Reverses the effect of usbtll_omap_probe(). 350 */ 351 static int usbtll_omap_remove(struct platform_device *pdev) 352 { 353 struct usbtll_omap *tll = platform_get_drvdata(pdev); 354 355 clk_put(tll->usbtll_p2_fck); 356 clk_put(tll->usbtll_p1_fck); 357 pm_runtime_disable(&pdev->dev); 358 kfree(tll); 359 return 0; 360 } 361 362 static int usbtll_runtime_resume(struct device *dev) 363 { 364 struct usbtll_omap *tll = dev_get_drvdata(dev); 365 struct usbtll_omap_platform_data *pdata = &tll->platdata; 366 unsigned long flags; 367 368 dev_dbg(dev, "usbtll_runtime_resume\n"); 369 370 if (!pdata) { 371 dev_dbg(dev, "missing platform_data\n"); 372 return -ENODEV; 373 } 374 375 spin_lock_irqsave(&tll->lock, flags); 376 377 if (is_ehci_tll_mode(pdata->port_mode[0])) 378 clk_enable(tll->usbtll_p1_fck); 379 380 if (is_ehci_tll_mode(pdata->port_mode[1])) 381 clk_enable(tll->usbtll_p2_fck); 382 383 spin_unlock_irqrestore(&tll->lock, flags); 384 385 return 0; 386 } 387 388 static int usbtll_runtime_suspend(struct device *dev) 389 { 390 struct usbtll_omap *tll = dev_get_drvdata(dev); 391 struct usbtll_omap_platform_data *pdata = &tll->platdata; 392 unsigned long flags; 393 394 dev_dbg(dev, "usbtll_runtime_suspend\n"); 395 396 if (!pdata) { 397 dev_dbg(dev, "missing platform_data\n"); 398 return -ENODEV; 399 } 400 401 spin_lock_irqsave(&tll->lock, flags); 402 403 if (is_ehci_tll_mode(pdata->port_mode[0])) 404 clk_disable(tll->usbtll_p1_fck); 405 406 if (is_ehci_tll_mode(pdata->port_mode[1])) 407 clk_disable(tll->usbtll_p2_fck); 408 409 spin_unlock_irqrestore(&tll->lock, flags); 410 411 return 0; 412 } 413 414 static const struct dev_pm_ops usbtllomap_dev_pm_ops = { 415 SET_RUNTIME_PM_OPS(usbtll_runtime_suspend, 416 usbtll_runtime_resume, 417 NULL) 418 }; 419 420 static struct platform_driver usbtll_omap_driver = { 421 .driver = { 422 .name = (char *)usbtll_driver_name, 423 .owner = THIS_MODULE, 424 .pm = &usbtllomap_dev_pm_ops, 425 }, 426 .probe = usbtll_omap_probe, 427 .remove = usbtll_omap_remove, 428 }; 429 430 int omap_tll_enable(void) 431 { 432 if (!tll_pdev) { 433 pr_err("missing omap usbhs tll platform_data\n"); 434 return -ENODEV; 435 } 436 return pm_runtime_get_sync(&tll_pdev->dev); 437 } 438 EXPORT_SYMBOL_GPL(omap_tll_enable); 439 440 int omap_tll_disable(void) 441 { 442 if (!tll_pdev) { 443 pr_err("missing omap usbhs tll platform_data\n"); 444 return -ENODEV; 445 } 446 return pm_runtime_put_sync(&tll_pdev->dev); 447 } 448 EXPORT_SYMBOL_GPL(omap_tll_disable); 449 450 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); 451 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); 452 MODULE_LICENSE("GPL v2"); 453 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers"); 454 455 static int __init omap_usbtll_drvinit(void) 456 { 457 return platform_driver_register(&usbtll_omap_driver); 458 } 459 460 /* 461 * init before usbhs core driver; 462 * The usbtll driver should be initialized before 463 * the usbhs core driver probe function is called. 464 */ 465 fs_initcall(omap_usbtll_drvinit); 466 467 static void __exit omap_usbtll_drvexit(void) 468 { 469 platform_driver_unregister(&usbtll_omap_driver); 470 } 471 module_exit(omap_usbtll_drvexit); 472