1 // SPDX-License-Identifier: GPL-2.0-only 2 /** 3 * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI 4 * 5 * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com 6 * Author: Keshava Munegowda <keshava_mgowda@ti.com> 7 * Author: Roger Quadros <rogerq@ti.com> 8 */ 9 #include <linux/kernel.h> 10 #include <linux/module.h> 11 #include <linux/types.h> 12 #include <linux/slab.h> 13 #include <linux/spinlock.h> 14 #include <linux/platform_device.h> 15 #include <linux/clk.h> 16 #include <linux/io.h> 17 #include <linux/err.h> 18 #include <linux/pm_runtime.h> 19 #include <linux/platform_data/usb-omap.h> 20 #include <linux/of.h> 21 22 #include "omap-usb.h" 23 24 #define USBTLL_DRIVER_NAME "usbhs_tll" 25 26 /* TLL Register Set */ 27 #define OMAP_USBTLL_REVISION (0x00) 28 #define OMAP_USBTLL_SYSCONFIG (0x10) 29 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) 30 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) 31 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) 32 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) 33 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) 34 35 #define OMAP_USBTLL_SYSSTATUS (0x14) 36 #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) 37 38 #define OMAP_USBTLL_IRQSTATUS (0x18) 39 #define OMAP_USBTLL_IRQENABLE (0x1C) 40 41 #define OMAP_TLL_SHARED_CONF (0x30) 42 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) 43 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) 44 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) 45 #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) 46 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) 47 48 #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) 49 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 50 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16) 51 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15) 52 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) 53 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) 54 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) 55 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) 56 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1) 57 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) 58 #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) 59 60 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 61 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 62 #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 63 #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 64 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 65 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 66 #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 67 #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 68 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA 69 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB 70 71 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) 72 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) 73 #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) 74 #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) 75 #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) 76 #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) 77 #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) 78 #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) 79 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) 80 81 #define OMAP_REV2_TLL_CHANNEL_COUNT 2 82 #define OMAP_TLL_CHANNEL_COUNT 3 83 #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) 84 #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) 85 #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) 86 87 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */ 88 #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */ 89 #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */ 90 #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */ 91 #define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */ 92 93 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) 94 95 /* only PHY and UNUSED modes don't need TLL */ 96 #define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\ 97 (x) != OMAP_EHCI_PORT_MODE_PHY) 98 99 struct usbtll_omap { 100 void __iomem *base; 101 int nch; /* num. of channels */ 102 struct clk *ch_clk[]; /* must be the last member */ 103 }; 104 105 /*-------------------------------------------------------------------------*/ 106 107 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; 108 static struct device *tll_dev; 109 static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */ 110 111 /*-------------------------------------------------------------------------*/ 112 113 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val) 114 { 115 writel_relaxed(val, base + reg); 116 } 117 118 static inline u32 usbtll_read(void __iomem *base, u32 reg) 119 { 120 return readl_relaxed(base + reg); 121 } 122 123 static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val) 124 { 125 writeb_relaxed(val, base + reg); 126 } 127 128 static inline u8 usbtll_readb(void __iomem *base, u32 reg) 129 { 130 return readb_relaxed(base + reg); 131 } 132 133 /*-------------------------------------------------------------------------*/ 134 135 static bool is_ohci_port(enum usbhs_omap_port_mode pmode) 136 { 137 switch (pmode) { 138 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 139 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 140 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 141 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 142 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 143 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 144 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 145 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 146 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 147 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 148 return true; 149 150 default: 151 return false; 152 } 153 } 154 155 /* 156 * convert the port-mode enum to a value we can use in the FSLSMODE 157 * field of USBTLL_CHANNEL_CONF 158 */ 159 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) 160 { 161 switch (mode) { 162 case OMAP_USBHS_PORT_MODE_UNUSED: 163 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: 164 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; 165 166 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: 167 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; 168 169 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: 170 return OMAP_TLL_FSLSMODE_3PIN_PHY; 171 172 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: 173 return OMAP_TLL_FSLSMODE_4PIN_PHY; 174 175 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: 176 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; 177 178 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: 179 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; 180 181 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: 182 return OMAP_TLL_FSLSMODE_3PIN_TLL; 183 184 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: 185 return OMAP_TLL_FSLSMODE_4PIN_TLL; 186 187 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: 188 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; 189 190 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: 191 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; 192 default: 193 pr_warn("Invalid port mode, using default\n"); 194 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; 195 } 196 } 197 198 /** 199 * usbtll_omap_probe - initialize TI-based HCDs 200 * 201 * Allocates basic resources for this USB host controller. 202 */ 203 static int usbtll_omap_probe(struct platform_device *pdev) 204 { 205 struct device *dev = &pdev->dev; 206 struct resource *res; 207 struct usbtll_omap *tll; 208 void __iomem *base; 209 int i, nch, ver; 210 211 dev_dbg(dev, "starting TI HSUSB TLL Controller\n"); 212 213 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 214 base = devm_ioremap_resource(dev, res); 215 if (IS_ERR(base)) 216 return PTR_ERR(base); 217 218 pm_runtime_enable(dev); 219 pm_runtime_get_sync(dev); 220 221 ver = usbtll_read(base, OMAP_USBTLL_REVISION); 222 switch (ver) { 223 case OMAP_USBTLL_REV1: 224 case OMAP_USBTLL_REV4: 225 nch = OMAP_TLL_CHANNEL_COUNT; 226 break; 227 case OMAP_USBTLL_REV2: 228 case OMAP_USBTLL_REV3: 229 nch = OMAP_REV2_TLL_CHANNEL_COUNT; 230 break; 231 default: 232 nch = OMAP_TLL_CHANNEL_COUNT; 233 dev_dbg(dev, "rev 0x%x not recognized, assuming %d channels\n", 234 ver, nch); 235 break; 236 } 237 238 tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]), 239 GFP_KERNEL); 240 if (!tll) { 241 pm_runtime_put_sync(dev); 242 pm_runtime_disable(dev); 243 return -ENOMEM; 244 } 245 246 tll->base = base; 247 tll->nch = nch; 248 platform_set_drvdata(pdev, tll); 249 250 for (i = 0; i < nch; i++) { 251 char clkname[] = "usb_tll_hs_usb_chx_clk"; 252 253 snprintf(clkname, sizeof(clkname), 254 "usb_tll_hs_usb_ch%d_clk", i); 255 tll->ch_clk[i] = clk_get(dev, clkname); 256 257 if (IS_ERR(tll->ch_clk[i])) 258 dev_dbg(dev, "can't get clock : %s\n", clkname); 259 else 260 clk_prepare(tll->ch_clk[i]); 261 } 262 263 pm_runtime_put_sync(dev); 264 /* only after this can omap_tll_enable/disable work */ 265 spin_lock(&tll_lock); 266 tll_dev = dev; 267 spin_unlock(&tll_lock); 268 269 return 0; 270 } 271 272 /** 273 * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs 274 * @pdev: USB Host Controller being removed 275 * 276 * Reverses the effect of usbtll_omap_probe(). 277 */ 278 static int usbtll_omap_remove(struct platform_device *pdev) 279 { 280 struct usbtll_omap *tll = platform_get_drvdata(pdev); 281 int i; 282 283 spin_lock(&tll_lock); 284 tll_dev = NULL; 285 spin_unlock(&tll_lock); 286 287 for (i = 0; i < tll->nch; i++) { 288 if (!IS_ERR(tll->ch_clk[i])) { 289 clk_unprepare(tll->ch_clk[i]); 290 clk_put(tll->ch_clk[i]); 291 } 292 } 293 294 pm_runtime_disable(&pdev->dev); 295 return 0; 296 } 297 298 static const struct of_device_id usbtll_omap_dt_ids[] = { 299 { .compatible = "ti,usbhs-tll" }, 300 { } 301 }; 302 303 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids); 304 305 static struct platform_driver usbtll_omap_driver = { 306 .driver = { 307 .name = usbtll_driver_name, 308 .of_match_table = usbtll_omap_dt_ids, 309 }, 310 .probe = usbtll_omap_probe, 311 .remove = usbtll_omap_remove, 312 }; 313 314 int omap_tll_init(struct usbhs_omap_platform_data *pdata) 315 { 316 int i; 317 bool needs_tll; 318 unsigned reg; 319 struct usbtll_omap *tll; 320 321 if (!tll_dev) 322 return -ENODEV; 323 324 pm_runtime_get_sync(tll_dev); 325 326 spin_lock(&tll_lock); 327 tll = dev_get_drvdata(tll_dev); 328 needs_tll = false; 329 for (i = 0; i < tll->nch; i++) 330 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]); 331 332 if (needs_tll) { 333 void __iomem *base = tll->base; 334 335 /* Program Common TLL register */ 336 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF); 337 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON 338 | OMAP_TLL_SHARED_CONF_USB_DIVRATION); 339 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; 340 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; 341 342 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg); 343 344 /* Enable channels now */ 345 for (i = 0; i < tll->nch; i++) { 346 reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i)); 347 348 if (is_ohci_port(pdata->port_mode[i])) { 349 reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) 350 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; 351 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; 352 } else if (pdata->port_mode[i] == 353 OMAP_EHCI_PORT_MODE_TLL) { 354 /* 355 * Disable UTMI AutoIdle, BitStuffing 356 * and use SDR Mode. Enable ULPI AutoIdle. 357 */ 358 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE 359 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); 360 reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF; 361 reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE; 362 } else if (pdata->port_mode[i] == 363 OMAP_EHCI_PORT_MODE_HSIC) { 364 /* 365 * HSIC Mode requires UTMI port configurations 366 */ 367 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS 368 | OMAP_TLL_CHANNEL_CONF_CHRGVBUS 369 | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI 370 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF; 371 } else { 372 continue; 373 } 374 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; 375 usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg); 376 377 usbtll_writeb(base, 378 OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 379 0xbe); 380 } 381 } 382 383 spin_unlock(&tll_lock); 384 pm_runtime_put_sync(tll_dev); 385 386 return 0; 387 } 388 EXPORT_SYMBOL_GPL(omap_tll_init); 389 390 int omap_tll_enable(struct usbhs_omap_platform_data *pdata) 391 { 392 int i; 393 struct usbtll_omap *tll; 394 395 if (!tll_dev) 396 return -ENODEV; 397 398 pm_runtime_get_sync(tll_dev); 399 400 spin_lock(&tll_lock); 401 tll = dev_get_drvdata(tll_dev); 402 403 for (i = 0; i < tll->nch; i++) { 404 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { 405 int r; 406 407 if (IS_ERR(tll->ch_clk[i])) 408 continue; 409 410 r = clk_enable(tll->ch_clk[i]); 411 if (r) { 412 dev_err(tll_dev, 413 "Error enabling ch %d clock: %d\n", i, r); 414 } 415 } 416 } 417 418 spin_unlock(&tll_lock); 419 420 return 0; 421 } 422 EXPORT_SYMBOL_GPL(omap_tll_enable); 423 424 int omap_tll_disable(struct usbhs_omap_platform_data *pdata) 425 { 426 int i; 427 struct usbtll_omap *tll; 428 429 if (!tll_dev) 430 return -ENODEV; 431 432 spin_lock(&tll_lock); 433 tll = dev_get_drvdata(tll_dev); 434 435 for (i = 0; i < tll->nch; i++) { 436 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { 437 if (!IS_ERR(tll->ch_clk[i])) 438 clk_disable(tll->ch_clk[i]); 439 } 440 } 441 442 spin_unlock(&tll_lock); 443 pm_runtime_put_sync(tll_dev); 444 445 return 0; 446 } 447 EXPORT_SYMBOL_GPL(omap_tll_disable); 448 449 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); 450 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); 451 MODULE_LICENSE("GPL v2"); 452 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers"); 453 454 static int __init omap_usbtll_drvinit(void) 455 { 456 return platform_driver_register(&usbtll_omap_driver); 457 } 458 459 /* 460 * init before usbhs core driver; 461 * The usbtll driver should be initialized before 462 * the usbhs core driver probe function is called. 463 */ 464 fs_initcall(omap_usbtll_drvinit); 465 466 static void __exit omap_usbtll_drvexit(void) 467 { 468 platform_driver_unregister(&usbtll_omap_driver); 469 } 470 module_exit(omap_usbtll_drvexit); 471