1 /* 2 * Janz CMOD-IO MODULbus Carrier Board PCI Driver 3 * 4 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> 5 * 6 * Lots of inspiration and code was copied from drivers/mfd/sm501.c 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 */ 13 14 #include <linux/kernel.h> 15 #include <linux/module.h> 16 #include <linux/pci.h> 17 #include <linux/interrupt.h> 18 #include <linux/delay.h> 19 #include <linux/platform_device.h> 20 #include <linux/slab.h> 21 #include <linux/mfd/core.h> 22 23 #include <linux/mfd/janz.h> 24 25 #define DRV_NAME "janz-cmodio" 26 27 /* Size of each MODULbus module in PCI BAR4 */ 28 #define CMODIO_MODULBUS_SIZE 0x200 29 30 /* Maximum number of MODULbus modules on a CMOD-IO carrier board */ 31 #define CMODIO_MAX_MODULES 4 32 33 /* Module Parameters */ 34 static unsigned int num_modules = CMODIO_MAX_MODULES; 35 static char *modules[CMODIO_MAX_MODULES] = { 36 "empty", "empty", "empty", "empty", 37 }; 38 39 module_param_array(modules, charp, &num_modules, S_IRUGO); 40 MODULE_PARM_DESC(modules, "MODULbus modules attached to the carrier board"); 41 42 /* Unique Device Id */ 43 static unsigned int cmodio_id; 44 45 struct cmodio_device { 46 /* Parent PCI device */ 47 struct pci_dev *pdev; 48 49 /* PLX control registers */ 50 struct janz_cmodio_onboard_regs __iomem *ctrl; 51 52 /* hex switch position */ 53 u8 hex; 54 55 /* mfd-core API */ 56 struct mfd_cell cells[CMODIO_MAX_MODULES]; 57 struct resource resources[3 * CMODIO_MAX_MODULES]; 58 struct janz_platform_data pdata[CMODIO_MAX_MODULES]; 59 }; 60 61 /* 62 * Subdevices using the mfd-core API 63 */ 64 65 static int cmodio_setup_subdevice(struct cmodio_device *priv, 66 char *name, unsigned int devno, 67 unsigned int modno) 68 { 69 struct janz_platform_data *pdata; 70 struct mfd_cell *cell; 71 struct resource *res; 72 struct pci_dev *pci; 73 74 pci = priv->pdev; 75 cell = &priv->cells[devno]; 76 res = &priv->resources[devno * 3]; 77 pdata = &priv->pdata[devno]; 78 79 cell->name = name; 80 cell->resources = res; 81 cell->num_resources = 3; 82 83 /* Setup the subdevice ID -- must be unique */ 84 cell->id = cmodio_id++; 85 86 /* Add platform data */ 87 pdata->modno = modno; 88 cell->platform_data = pdata; 89 cell->pdata_size = sizeof(*pdata); 90 91 /* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */ 92 res->flags = IORESOURCE_MEM; 93 res->parent = &pci->resource[3]; 94 res->start = pci->resource[3].start + (CMODIO_MODULBUS_SIZE * modno); 95 res->end = res->start + CMODIO_MODULBUS_SIZE - 1; 96 res++; 97 98 /* PLX Control Registers -- PCI BAR4 is interrupt and other registers */ 99 res->flags = IORESOURCE_MEM; 100 res->parent = &pci->resource[4]; 101 res->start = pci->resource[4].start; 102 res->end = pci->resource[4].end; 103 res++; 104 105 /* 106 * IRQ 107 * 108 * The start and end fields are used as an offset to the irq_base 109 * parameter passed into the mfd_add_devices() function call. All 110 * devices share the same IRQ. 111 */ 112 res->flags = IORESOURCE_IRQ; 113 res->parent = NULL; 114 res->start = 0; 115 res->end = 0; 116 res++; 117 118 return 0; 119 } 120 121 /* Probe each submodule using kernel parameters */ 122 static int cmodio_probe_submodules(struct cmodio_device *priv) 123 { 124 struct pci_dev *pdev = priv->pdev; 125 unsigned int num_probed = 0; 126 char *name; 127 int i; 128 129 for (i = 0; i < num_modules; i++) { 130 name = modules[i]; 131 if (!strcmp(name, "") || !strcmp(name, "empty")) 132 continue; 133 134 dev_dbg(&priv->pdev->dev, "MODULbus %d: name %s\n", i, name); 135 cmodio_setup_subdevice(priv, name, num_probed, i); 136 num_probed++; 137 } 138 139 /* print an error message if no modules were probed */ 140 if (num_probed == 0) { 141 dev_err(&priv->pdev->dev, "no MODULbus modules specified, " 142 "please set the ``modules'' kernel " 143 "parameter according to your " 144 "hardware configuration\n"); 145 return -ENODEV; 146 } 147 148 return mfd_add_devices(&pdev->dev, 0, priv->cells, 149 num_probed, NULL, pdev->irq, NULL); 150 } 151 152 /* 153 * SYSFS Attributes 154 */ 155 156 static ssize_t mbus_show(struct device *dev, struct device_attribute *attr, 157 char *buf) 158 { 159 struct cmodio_device *priv = dev_get_drvdata(dev); 160 161 return snprintf(buf, PAGE_SIZE, "%x\n", priv->hex); 162 } 163 164 static DEVICE_ATTR(modulbus_number, S_IRUGO, mbus_show, NULL); 165 166 static struct attribute *cmodio_sysfs_attrs[] = { 167 &dev_attr_modulbus_number.attr, 168 NULL, 169 }; 170 171 static const struct attribute_group cmodio_sysfs_attr_group = { 172 .attrs = cmodio_sysfs_attrs, 173 }; 174 175 /* 176 * PCI Driver 177 */ 178 179 static int cmodio_pci_probe(struct pci_dev *dev, 180 const struct pci_device_id *id) 181 { 182 struct cmodio_device *priv; 183 int ret; 184 185 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL); 186 if (!priv) 187 return -ENOMEM; 188 189 pci_set_drvdata(dev, priv); 190 priv->pdev = dev; 191 192 /* Hardware Initialization */ 193 ret = pci_enable_device(dev); 194 if (ret) { 195 dev_err(&dev->dev, "unable to enable device\n"); 196 return ret; 197 } 198 199 pci_set_master(dev); 200 ret = pci_request_regions(dev, DRV_NAME); 201 if (ret) { 202 dev_err(&dev->dev, "unable to request regions\n"); 203 goto out_pci_disable_device; 204 } 205 206 /* Onboard configuration registers */ 207 priv->ctrl = pci_ioremap_bar(dev, 4); 208 if (!priv->ctrl) { 209 dev_err(&dev->dev, "unable to remap onboard regs\n"); 210 ret = -ENOMEM; 211 goto out_pci_release_regions; 212 } 213 214 /* Read the hex switch on the carrier board */ 215 priv->hex = ioread8(&priv->ctrl->int_enable); 216 217 /* Add the MODULbus number (hex switch value) to the device's sysfs */ 218 ret = sysfs_create_group(&dev->dev.kobj, &cmodio_sysfs_attr_group); 219 if (ret) { 220 dev_err(&dev->dev, "unable to create sysfs attributes\n"); 221 goto out_unmap_ctrl; 222 } 223 224 /* 225 * Disable all interrupt lines, each submodule will enable its 226 * own interrupt line if needed 227 */ 228 iowrite8(0xf, &priv->ctrl->int_disable); 229 230 /* Register drivers for all submodules */ 231 ret = cmodio_probe_submodules(priv); 232 if (ret) { 233 dev_err(&dev->dev, "unable to probe submodules\n"); 234 goto out_sysfs_remove_group; 235 } 236 237 return 0; 238 239 out_sysfs_remove_group: 240 sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group); 241 out_unmap_ctrl: 242 iounmap(priv->ctrl); 243 out_pci_release_regions: 244 pci_release_regions(dev); 245 out_pci_disable_device: 246 pci_disable_device(dev); 247 248 return ret; 249 } 250 251 static void cmodio_pci_remove(struct pci_dev *dev) 252 { 253 struct cmodio_device *priv = pci_get_drvdata(dev); 254 255 mfd_remove_devices(&dev->dev); 256 sysfs_remove_group(&dev->dev.kobj, &cmodio_sysfs_attr_group); 257 iounmap(priv->ctrl); 258 pci_release_regions(dev); 259 pci_disable_device(dev); 260 } 261 262 #define PCI_VENDOR_ID_JANZ 0x13c3 263 264 /* The list of devices that this module will support */ 265 static const struct pci_device_id cmodio_pci_ids[] = { 266 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0101 }, 267 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0100 }, 268 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0201 }, 269 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_JANZ, 0x0202 }, 270 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0201 }, 271 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_JANZ, 0x0202 }, 272 { 0, } 273 }; 274 MODULE_DEVICE_TABLE(pci, cmodio_pci_ids); 275 276 static struct pci_driver cmodio_pci_driver = { 277 .name = DRV_NAME, 278 .id_table = cmodio_pci_ids, 279 .probe = cmodio_pci_probe, 280 .remove = cmodio_pci_remove, 281 }; 282 283 module_pci_driver(cmodio_pci_driver); 284 285 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>"); 286 MODULE_DESCRIPTION("Janz CMOD-IO PCI MODULbus Carrier Board Driver"); 287 MODULE_LICENSE("GPL"); 288