1# 2# Multifunction miscellaneous devices 3# 4 5menu "Multifunction device drivers" 6 depends on HAS_IOMEM 7 8config MFD_CORE 9 tristate 10 default n 11 12config MFD_88PM860X 13 bool "Support Marvell 88PM8606/88PM8607" 14 depends on I2C=y && GENERIC_HARDIRQS 15 select MFD_CORE 16 help 17 This supports for Marvell 88PM8606/88PM8607 Power Management IC. 18 This includes the I2C driver and the core APIs _only_, you have to 19 select individual components like voltage regulators, RTC and 20 battery-charger under the corresponding menus. 21 22config MFD_SM501 23 tristate "Support for Silicon Motion SM501" 24 ---help--- 25 This is the core driver for the Silicon Motion SM501 multimedia 26 companion chip. This device is a multifunction device which may 27 provide numerous interfaces including USB host controller, USB gadget, 28 asynchronous serial ports, audio functions, and a dual display video 29 interface. The device may be connected by PCI or local bus with 30 varying functions enabled. 31 32config MFD_SM501_GPIO 33 bool "Export GPIO via GPIO layer" 34 depends on MFD_SM501 && GPIOLIB 35 ---help--- 36 This option uses the gpio library layer to export the 64 GPIO 37 lines on the SM501. The platform data is used to supply the 38 base number for the first GPIO line to register. 39 40config MFD_ASIC3 41 bool "Support for Compaq ASIC3" 42 depends on GENERIC_HARDIRQS && GPIOLIB && ARM 43 select MFD_CORE 44 ---help--- 45 This driver supports the ASIC3 multifunction chip found on many 46 PDAs (mainly iPAQ and HTC based ones) 47 48config MFD_SH_MOBILE_SDHI 49 bool "Support for SuperH Mobile SDHI" 50 depends on SUPERH || ARCH_SHMOBILE 51 select MFD_CORE 52 select TMIO_MMC_DMA 53 ---help--- 54 This driver supports the SDHI hardware block found in many 55 SuperH Mobile SoCs. 56 57config MFD_DAVINCI_VOICECODEC 58 tristate 59 select MFD_CORE 60 61config MFD_DM355EVM_MSP 62 bool "DaVinci DM355 EVM microcontroller" 63 depends on I2C && MACH_DAVINCI_DM355_EVM 64 help 65 This driver supports the MSP430 microcontroller used on these 66 boards. MSP430 firmware manages resets and power sequencing, 67 inputs from buttons and the IR remote, LEDs, an RTC, and more. 68 69config HTC_EGPIO 70 bool "HTC EGPIO support" 71 depends on GENERIC_HARDIRQS && GPIOLIB && ARM 72 help 73 This driver supports the CPLD egpio chip present on 74 several HTC phones. It provides basic support for input 75 pins, output pins, and irqs. 76 77config HTC_PASIC3 78 tristate "HTC PASIC3 LED/DS1WM chip support" 79 select MFD_CORE 80 help 81 This core driver provides register access for the LED/DS1WM 82 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and 83 HTC Magician devices, respectively. Actual functionality is 84 handled by the leds-pasic3 and ds1wm drivers. 85 86config HTC_I2CPLD 87 bool "HTC I2C PLD chip support" 88 depends on I2C=y && GPIOLIB 89 help 90 If you say yes here you get support for the supposed CPLD 91 found on omap850 HTC devices like the HTC Wizard and HTC Herald. 92 This device provides input and output GPIOs through an I2C 93 interface to one or more sub-chips. 94 95config UCB1400_CORE 96 tristate "Philips UCB1400 Core driver" 97 depends on AC97_BUS 98 depends on GPIOLIB 99 help 100 This enables support for the Philips UCB1400 core functions. 101 The UCB1400 is an AC97 audio codec. 102 103 To compile this driver as a module, choose M here: the 104 module will be called ucb1400_core. 105 106config TPS65010 107 tristate "TPS6501x Power Management chips" 108 depends on I2C && GPIOLIB 109 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK 110 help 111 If you say yes here you get support for the TPS6501x series of 112 Power Management chips. These include voltage regulators, 113 lithium ion/polymer battery charging, and other features that 114 are often used in portable devices like cell phones and cameras. 115 116 This driver can also be built as a module. If so, the module 117 will be called tps65010. 118 119config MENELAUS 120 bool "Texas Instruments TWL92330/Menelaus PM chip" 121 depends on I2C=y && ARCH_OMAP2 122 help 123 If you say yes here you get support for the Texas Instruments 124 TWL92330/Menelaus Power Management chip. This include voltage 125 regulators, Dual slot memory card transceivers, real-time clock 126 and other features that are often used in portable devices like 127 cell phones and PDAs. 128 129config TWL4030_CORE 130 bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" 131 depends on I2C=y && GENERIC_HARDIRQS 132 help 133 Say yes here if you have TWL4030 / TWL6030 family chip on your board. 134 This core driver provides register access and IRQ handling 135 facilities, and registers devices for the various functions 136 so that function-specific drivers can bind to them. 137 138 These multi-function chips are found on many OMAP2 and OMAP3 139 boards, providing power management, RTC, GPIO, keypad, a 140 high speed USB OTG transceiver, an audio codec (on most 141 versions) and many other features. 142 143config TWL4030_POWER 144 bool "Support power resources on TWL4030 family chips" 145 depends on TWL4030_CORE && ARM 146 help 147 Say yes here if you want to use the power resources on the 148 TWL4030 family chips. Most of these resources are regulators, 149 which have a separate driver; some are control signals, such 150 as clock request handshaking. 151 152 This driver uses board-specific data to initialize the resources 153 and load scripts controling which resources are switched off/on 154 or reset when a sleep, wakeup or warm reset event occurs. 155 156config TWL4030_CODEC 157 bool 158 depends on TWL4030_CORE 159 select MFD_CORE 160 default n 161 162config MFD_TMIO 163 bool 164 default n 165 166config TMIO_MMC_DMA 167 bool 168 select DMA_ENGINE 169 select DMADEVICES 170 171config MFD_T7L66XB 172 bool "Support Toshiba T7L66XB" 173 depends on ARM && HAVE_CLK 174 select MFD_CORE 175 select MFD_TMIO 176 help 177 Support for Toshiba Mobile IO Controller T7L66XB 178 179config MFD_TC6387XB 180 bool "Support Toshiba TC6387XB" 181 depends on ARM && HAVE_CLK 182 select MFD_CORE 183 select MFD_TMIO 184 help 185 Support for Toshiba Mobile IO Controller TC6387XB 186 187config MFD_TC6393XB 188 bool "Support Toshiba TC6393XB" 189 depends on GPIOLIB && ARM 190 select MFD_CORE 191 select MFD_TMIO 192 help 193 Support for Toshiba Mobile IO Controller TC6393XB 194 195config PMIC_DA903X 196 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" 197 depends on I2C=y 198 help 199 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a 200 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC 201 usually found on PXA processors-based platforms. This includes 202 the I2C driver and the core APIs _only_, you have to select 203 individual components like LCD backlight, voltage regulators, 204 LEDs and battery-charger under the corresponding menus. 205 206config PMIC_ADP5520 207 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" 208 depends on I2C=y 209 help 210 Say yes here to add support for Analog Devices AD5520 and ADP5501, 211 Multifunction Power Management IC. This includes 212 the I2C driver and the core APIs _only_, you have to select 213 individual components like LCD backlight, LEDs, GPIOs and Kepad 214 under the corresponding menus. 215 216config MFD_MAX8925 217 bool "Maxim Semiconductor MAX8925 PMIC Support" 218 depends on I2C=y && GENERIC_HARDIRQS 219 select MFD_CORE 220 help 221 Say yes here to support for Maxim Semiconductor MAX8925. This is 222 a Power Management IC. This driver provies common support for 223 accessing the device, additional drivers must be enabled in order 224 to use the functionality of the device. 225 226config MFD_WM8400 227 tristate "Support Wolfson Microelectronics WM8400" 228 select MFD_CORE 229 depends on I2C 230 help 231 Support for the Wolfson Microelecronics WM8400 PMIC and audio 232 CODEC. This driver provides common support for accessing 233 the device, additional drivers must be enabled in order to use 234 the functionality of the device. 235 236config MFD_WM831X 237 bool "Support Wolfson Microelectronics WM831x/2x PMICs" 238 select MFD_CORE 239 depends on I2C=y && GENERIC_HARDIRQS 240 help 241 Support for the Wolfson Microelecronics WM831x and WM832x PMICs. 242 This driver provides common support for accessing the device, 243 additional drivers must be enabled in order to use the 244 functionality of the device. 245 246config MFD_WM8350 247 bool 248 depends on GENERIC_HARDIRQS 249 250config MFD_WM8350_CONFIG_MODE_0 251 bool 252 depends on MFD_WM8350 253 254config MFD_WM8350_CONFIG_MODE_1 255 bool 256 depends on MFD_WM8350 257 258config MFD_WM8350_CONFIG_MODE_2 259 bool 260 depends on MFD_WM8350 261 262config MFD_WM8350_CONFIG_MODE_3 263 bool 264 depends on MFD_WM8350 265 266config MFD_WM8351_CONFIG_MODE_0 267 bool 268 depends on MFD_WM8350 269 270config MFD_WM8351_CONFIG_MODE_1 271 bool 272 depends on MFD_WM8350 273 274config MFD_WM8351_CONFIG_MODE_2 275 bool 276 depends on MFD_WM8350 277 278config MFD_WM8351_CONFIG_MODE_3 279 bool 280 depends on MFD_WM8350 281 282config MFD_WM8352_CONFIG_MODE_0 283 bool 284 depends on MFD_WM8350 285 286config MFD_WM8352_CONFIG_MODE_1 287 bool 288 depends on MFD_WM8350 289 290config MFD_WM8352_CONFIG_MODE_2 291 bool 292 depends on MFD_WM8350 293 294config MFD_WM8352_CONFIG_MODE_3 295 bool 296 depends on MFD_WM8350 297 298config MFD_WM8350_I2C 299 bool "Support Wolfson Microelectronics WM8350 with I2C" 300 select MFD_WM8350 301 depends on I2C=y && GENERIC_HARDIRQS 302 help 303 The WM8350 is an integrated audio and power management 304 subsystem with watchdog and RTC functionality for embedded 305 systems. This option enables core support for the WM8350 with 306 I2C as the control interface. Additional options must be 307 selected to enable support for the functionality of the chip. 308 309config MFD_WM8994 310 bool "Support Wolfson Microelectronics WM8994" 311 select MFD_CORE 312 depends on I2C=y && GENERIC_HARDIRQS 313 help 314 The WM8994 is a highly integrated hi-fi CODEC designed for 315 smartphone applicatiosn. As well as audio functionality it 316 has on board GPIO and regulator functionality which is 317 supported via the relevant subsystems. This driver provides 318 core support for the WM8994, in order to use the actual 319 functionaltiy of the device other drivers must be enabled. 320 321config MFD_PCF50633 322 tristate "Support for NXP PCF50633" 323 depends on I2C 324 help 325 Say yes here if you have NXP PCF50633 chip on your board. 326 This core driver provides register access and IRQ handling 327 facilities, and registers devices for the various functions 328 so that function-specific drivers can bind to them. 329 330config MFD_MC13783 331 tristate "Support Freescale MC13783" 332 depends on SPI_MASTER 333 select MFD_CORE 334 help 335 Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. 336 This driver provides common support for accessing the device, 337 additional drivers must be enabled in order to use the 338 functionality of the device. 339 340config PCF50633_ADC 341 tristate "Support for NXP PCF50633 ADC" 342 depends on MFD_PCF50633 343 help 344 Say yes here if you want to include support for ADC in the 345 NXP PCF50633 chip. 346 347config PCF50633_GPIO 348 tristate "Support for NXP PCF50633 GPIO" 349 depends on MFD_PCF50633 350 help 351 Say yes here if you want to include support GPIO for pins on 352 the PCF50633 chip. 353 354config AB3100_CORE 355 bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" 356 depends on I2C=y 357 default y if ARCH_U300 358 help 359 Select this to enable the AB3100 Mixed Signal IC core 360 functionality. This connects to a AB3100 on the I2C bus 361 and expose a number of symbols needed for dependent devices 362 to read and write registers and subscribe to events from 363 this multi-functional IC. This is needed to use other features 364 of the AB3100 such as battery-backed RTC, charging control, 365 LEDs, vibrator, system power and temperature, power management 366 and ALSA sound. 367 368config AB3100_OTP 369 tristate "ST-Ericsson AB3100 OTP functions" 370 depends on AB3100_CORE 371 default y if AB3100_CORE 372 help 373 Select this to enable the AB3100 Mixed Signal IC OTP (one-time 374 programmable memory) support. This exposes a sysfs file to read 375 out OTP values. 376 377config EZX_PCAP 378 bool "PCAP Support" 379 depends on GENERIC_HARDIRQS && SPI_MASTER 380 help 381 This enables the PCAP ASIC present on EZX Phones. This is 382 needed for MMC, TouchScreen, Sound, USB, etc.. 383 384config AB4500_CORE 385 tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" 386 depends on SPI 387 help 388 Select this option to enable access to AB4500 power management 389 chip. This connects to U8500 on the SSP/SPI bus and exports 390 read/write functions for the devices to get access to this chip. 391 This chip embeds various other multimedia funtionalities as well. 392 393config MFD_TIMBERDALE 394 tristate "Support for the Timberdale FPGA" 395 select MFD_CORE 396 depends on PCI && GPIOLIB 397 ---help--- 398 This is the core driver for the timberdale FPGA. This device is a 399 multifunction device which exposes numerous platform devices. 400 401 The timberdale FPGA can be found on the Intel Atom development board 402 for in-vehicle infontainment, called Russellville. 403 404config LPC_SCH 405 tristate "Intel SCH LPC" 406 depends on PCI 407 select MFD_CORE 408 help 409 LPC bridge function of the Intel SCH provides support for 410 System Management Bus and General Purpose I/O. 411 412config MFD_RDC321X 413 tristate "Support for RDC-R321x southbridge" 414 select MFD_CORE 415 depends on PCI 416 help 417 Say yes here if you want to have support for the RDC R-321x SoC 418 southbridge which provides access to GPIOs and Watchdog using the 419 southbridge PCI device configuration space. 420 421endmenu 422 423menu "Multimedia Capabilities Port drivers" 424 depends on ARCH_SA1100 425 426config MCP 427 tristate 428 429# Interface drivers 430config MCP_SA11X0 431 tristate "Support SA11x0 MCP interface" 432 depends on ARCH_SA1100 433 select MCP 434 435# Chip drivers 436config MCP_UCB1200 437 tristate "Support for UCB1200 / UCB1300" 438 depends on MCP 439 440config MCP_UCB1200_TS 441 tristate "Touchscreen interface support" 442 depends on MCP_UCB1200 && INPUT 443 444endmenu 445