1 /* 2 * Base driver for Marvell 88PM805 3 * 4 * Copyright (C) 2012 Marvell International Ltd. 5 * Haojian Zhuang <haojian.zhuang@marvell.com> 6 * Joseph(Yossi) Hanin <yhanin@marvell.com> 7 * Qiao Zhou <zhouqiao@marvell.com> 8 * 9 * This file is subject to the terms and conditions of the GNU General 10 * Public License. See the file "COPYING" in the main directory of this 11 * archive for more details. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/i2c.h> 26 #include <linux/irq.h> 27 #include <linux/mfd/core.h> 28 #include <linux/mfd/88pm80x.h> 29 #include <linux/slab.h> 30 #include <linux/delay.h> 31 32 #define PM805_CHIP_ID (0x00) 33 34 static const struct i2c_device_id pm80x_id_table[] = { 35 {"88PM805", CHIP_PM805}, 36 {} /* NULL terminated */ 37 }; 38 MODULE_DEVICE_TABLE(i2c, pm80x_id_table); 39 40 /* Interrupt Number in 88PM805 */ 41 enum { 42 PM805_IRQ_LDO_OFF, /*0 */ 43 PM805_IRQ_SRC_DPLL_LOCK, /*1 */ 44 PM805_IRQ_CLIP_FAULT, 45 PM805_IRQ_MIC_CONFLICT, 46 PM805_IRQ_HP2_SHRT, 47 PM805_IRQ_HP1_SHRT, /*5 */ 48 PM805_IRQ_FINE_PLL_FAULT, 49 PM805_IRQ_RAW_PLL_FAULT, 50 PM805_IRQ_VOLP_BTN_DET, 51 PM805_IRQ_VOLM_BTN_DET, 52 PM805_IRQ_SHRT_BTN_DET, /*10 */ 53 PM805_IRQ_MIC_DET, /*11 */ 54 55 PM805_MAX_IRQ, 56 }; 57 58 static struct resource codec_resources[] = { 59 { 60 /* Headset microphone insertion or removal */ 61 .name = "micin", 62 .start = PM805_IRQ_MIC_DET, 63 .end = PM805_IRQ_MIC_DET, 64 .flags = IORESOURCE_IRQ, 65 }, 66 { 67 /* Audio short HP1 */ 68 .name = "audio-short1", 69 .start = PM805_IRQ_HP1_SHRT, 70 .end = PM805_IRQ_HP1_SHRT, 71 .flags = IORESOURCE_IRQ, 72 }, 73 { 74 /* Audio short HP2 */ 75 .name = "audio-short2", 76 .start = PM805_IRQ_HP2_SHRT, 77 .end = PM805_IRQ_HP2_SHRT, 78 .flags = IORESOURCE_IRQ, 79 }, 80 }; 81 82 static struct mfd_cell codec_devs[] = { 83 { 84 .name = "88pm80x-codec", 85 .num_resources = ARRAY_SIZE(codec_resources), 86 .resources = &codec_resources[0], 87 .id = -1, 88 }, 89 }; 90 91 static struct regmap_irq pm805_irqs[] = { 92 /* INT0 */ 93 [PM805_IRQ_LDO_OFF] = { 94 .mask = PM805_INT1_HP1_SHRT, 95 }, 96 [PM805_IRQ_SRC_DPLL_LOCK] = { 97 .mask = PM805_INT1_HP2_SHRT, 98 }, 99 [PM805_IRQ_CLIP_FAULT] = { 100 .mask = PM805_INT1_MIC_CONFLICT, 101 }, 102 [PM805_IRQ_MIC_CONFLICT] = { 103 .mask = PM805_INT1_CLIP_FAULT, 104 }, 105 [PM805_IRQ_HP2_SHRT] = { 106 .mask = PM805_INT1_LDO_OFF, 107 }, 108 [PM805_IRQ_HP1_SHRT] = { 109 .mask = PM805_INT1_SRC_DPLL_LOCK, 110 }, 111 /* INT1 */ 112 [PM805_IRQ_FINE_PLL_FAULT] = { 113 .reg_offset = 1, 114 .mask = PM805_INT2_MIC_DET, 115 }, 116 [PM805_IRQ_RAW_PLL_FAULT] = { 117 .reg_offset = 1, 118 .mask = PM805_INT2_SHRT_BTN_DET, 119 }, 120 [PM805_IRQ_VOLP_BTN_DET] = { 121 .reg_offset = 1, 122 .mask = PM805_INT2_VOLM_BTN_DET, 123 }, 124 [PM805_IRQ_VOLM_BTN_DET] = { 125 .reg_offset = 1, 126 .mask = PM805_INT2_VOLP_BTN_DET, 127 }, 128 [PM805_IRQ_SHRT_BTN_DET] = { 129 .reg_offset = 1, 130 .mask = PM805_INT2_RAW_PLL_FAULT, 131 }, 132 [PM805_IRQ_MIC_DET] = { 133 .reg_offset = 1, 134 .mask = PM805_INT2_FINE_PLL_FAULT, 135 }, 136 }; 137 138 static int device_irq_init_805(struct pm80x_chip *chip) 139 { 140 struct regmap *map = chip->regmap; 141 unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; 142 int data, mask, ret = -EINVAL; 143 144 if (!map || !chip->irq) { 145 dev_err(chip->dev, "incorrect parameters\n"); 146 return -EINVAL; 147 } 148 149 /* 150 * irq_mode defines the way of clearing interrupt. it's read-clear by 151 * default. 152 */ 153 mask = 154 PM805_STATUS0_INT_CLEAR | PM805_STATUS0_INV_INT | 155 PM800_STATUS0_INT_MASK; 156 157 data = PM805_STATUS0_INT_CLEAR; 158 ret = regmap_update_bits(map, PM805_INT_STATUS0, mask, data); 159 /* 160 * PM805_INT_STATUS is under 32K clock domain, so need to 161 * add proper delay before the next I2C register access. 162 */ 163 msleep(1); 164 165 if (ret < 0) 166 goto out; 167 168 ret = 169 regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, 170 chip->regmap_irq_chip, &chip->irq_data); 171 172 out: 173 return ret; 174 } 175 176 static void device_irq_exit_805(struct pm80x_chip *chip) 177 { 178 regmap_del_irq_chip(chip->irq, chip->irq_data); 179 } 180 181 static struct regmap_irq_chip pm805_irq_chip = { 182 .name = "88pm805", 183 .irqs = pm805_irqs, 184 .num_irqs = ARRAY_SIZE(pm805_irqs), 185 186 .num_regs = 2, 187 .status_base = PM805_INT_STATUS1, 188 .mask_base = PM805_INT_MASK1, 189 .ack_base = PM805_INT_STATUS1, 190 }; 191 192 static int device_805_init(struct pm80x_chip *chip) 193 { 194 int ret = 0; 195 unsigned int val; 196 struct regmap *map = chip->regmap; 197 198 if (!map) { 199 dev_err(chip->dev, "regmap is invalid\n"); 200 return -EINVAL; 201 } 202 203 ret = regmap_read(map, PM805_CHIP_ID, &val); 204 if (ret < 0) { 205 dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret); 206 goto out_irq_init; 207 } 208 chip->version = val; 209 210 chip->regmap_irq_chip = &pm805_irq_chip; 211 212 ret = device_irq_init_805(chip); 213 if (ret < 0) { 214 dev_err(chip->dev, "Failed to init pm805 irq!\n"); 215 goto out_irq_init; 216 } 217 218 ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], 219 ARRAY_SIZE(codec_devs), &codec_resources[0], 0, 220 NULL); 221 if (ret < 0) { 222 dev_err(chip->dev, "Failed to add codec subdev\n"); 223 goto out_codec; 224 } else 225 dev_info(chip->dev, "[%s]:Added mfd codec_devs\n", __func__); 226 227 return 0; 228 229 out_codec: 230 device_irq_exit_805(chip); 231 out_irq_init: 232 return ret; 233 } 234 235 static int pm805_probe(struct i2c_client *client, 236 const struct i2c_device_id *id) 237 { 238 int ret = 0; 239 struct pm80x_chip *chip; 240 struct pm80x_platform_data *pdata = client->dev.platform_data; 241 242 ret = pm80x_init(client, id); 243 if (ret) { 244 dev_err(&client->dev, "pm805_init fail!\n"); 245 goto out_init; 246 } 247 248 chip = i2c_get_clientdata(client); 249 250 ret = device_805_init(chip); 251 if (ret) { 252 dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id); 253 goto err_805_init; 254 } 255 256 if (pdata->plat_config) 257 pdata->plat_config(chip, pdata); 258 259 err_805_init: 260 pm80x_deinit(client); 261 out_init: 262 return ret; 263 } 264 265 static int pm805_remove(struct i2c_client *client) 266 { 267 struct pm80x_chip *chip = i2c_get_clientdata(client); 268 269 mfd_remove_devices(chip->dev); 270 device_irq_exit_805(chip); 271 272 pm80x_deinit(client); 273 274 return 0; 275 } 276 277 static struct i2c_driver pm805_driver = { 278 .driver = { 279 .name = "88PM80X", 280 .owner = THIS_MODULE, 281 .pm = &pm80x_pm_ops, 282 }, 283 .probe = pm805_probe, 284 .remove = pm805_remove, 285 .id_table = pm80x_id_table, 286 }; 287 288 static int __init pm805_i2c_init(void) 289 { 290 return i2c_add_driver(&pm805_driver); 291 } 292 subsys_initcall(pm805_i2c_init); 293 294 static void __exit pm805_i2c_exit(void) 295 { 296 i2c_del_driver(&pm805_driver); 297 } 298 module_exit(pm805_i2c_exit); 299 300 MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM805"); 301 MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>"); 302 MODULE_LICENSE("GPL"); 303