1 /* 2 * linux/drivers/message/fusion/mptspi.c 3 * For use with LSI PCI chip/adapter(s) 4 * running LSI Fusion MPT (Message Passing Technology) firmware. 5 * 6 * Copyright (c) 1999-2008 LSI Corporation 7 * (mailto:DL-MPTFusionLinux@lsi.com) 8 * 9 */ 10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 11 /* 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; version 2 of the License. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 NO WARRANTY 22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 26 solely responsible for determining the appropriateness of using and 27 distributing the Program and assumes all risks associated with its 28 exercise of rights under this Agreement, including but not limited to 29 the risks and costs of program errors, damage to or loss of data, 30 programs or equipment, and unavailability or interruption of operations. 31 32 DISCLAIMER OF LIABILITY 33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 40 41 You should have received a copy of the GNU General Public License 42 along with this program; if not, write to the Free Software 43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 44 */ 45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 46 47 #include <linux/module.h> 48 #include <linux/kernel.h> 49 #include <linux/slab.h> 50 #include <linux/init.h> 51 #include <linux/errno.h> 52 #include <linux/kdev_t.h> 53 #include <linux/blkdev.h> 54 #include <linux/delay.h> /* for mdelay */ 55 #include <linux/interrupt.h> 56 #include <linux/reboot.h> /* notifier code */ 57 #include <linux/workqueue.h> 58 #include <linux/raid_class.h> 59 60 #include <scsi/scsi.h> 61 #include <scsi/scsi_cmnd.h> 62 #include <scsi/scsi_device.h> 63 #include <scsi/scsi_host.h> 64 #include <scsi/scsi_tcq.h> 65 #include <scsi/scsi_transport.h> 66 #include <scsi/scsi_transport_spi.h> 67 #include <scsi/scsi_dbg.h> 68 69 #include "mptbase.h" 70 #include "mptscsih.h" 71 72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 73 #define my_NAME "Fusion MPT SPI Host driver" 74 #define my_VERSION MPT_LINUX_VERSION_COMMON 75 #define MYNAM "mptspi" 76 77 MODULE_AUTHOR(MODULEAUTHOR); 78 MODULE_DESCRIPTION(my_NAME); 79 MODULE_LICENSE("GPL"); 80 MODULE_VERSION(my_VERSION); 81 82 /* Command line args */ 83 static int mpt_saf_te = MPTSCSIH_SAF_TE; 84 module_param(mpt_saf_te, int, 0); 85 MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); 86 87 static void mptspi_write_offset(struct scsi_target *, int); 88 static void mptspi_write_width(struct scsi_target *, int); 89 static int mptspi_write_spi_device_pg1(struct scsi_target *, 90 struct _CONFIG_PAGE_SCSI_DEVICE_1 *); 91 92 static struct scsi_transport_template *mptspi_transport_template = NULL; 93 94 static u8 mptspiDoneCtx = MPT_MAX_PROTOCOL_DRIVERS; 95 static u8 mptspiTaskCtx = MPT_MAX_PROTOCOL_DRIVERS; 96 static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */ 97 98 /** 99 * mptspi_setTargetNegoParms - Update the target negotiation parameters 100 * @hd: Pointer to a SCSI Host Structure 101 * @target: per target private data 102 * @sdev: SCSI device 103 * 104 * Update the target negotiation parameters based on the Inquiry 105 * data, adapter capabilities, and NVRAM settings. 106 **/ 107 static void 108 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, 109 struct scsi_device *sdev) 110 { 111 MPT_ADAPTER *ioc = hd->ioc; 112 SpiCfgData *pspi_data = &ioc->spi_data; 113 int id = (int) target->id; 114 int nvram; 115 u8 width = MPT_NARROW; 116 u8 factor = MPT_ASYNC; 117 u8 offset = 0; 118 u8 nfactor; 119 u8 noQas = 1; 120 121 target->negoFlags = pspi_data->noQas; 122 123 if (sdev->scsi_level < SCSI_2) { 124 width = 0; 125 factor = MPT_ULTRA2; 126 offset = pspi_data->maxSyncOffset; 127 target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; 128 } else { 129 if (scsi_device_wide(sdev)) 130 width = 1; 131 132 if (scsi_device_sync(sdev)) { 133 factor = pspi_data->minSyncFactor; 134 if (!scsi_device_dt(sdev)) 135 factor = MPT_ULTRA2; 136 else { 137 if (!scsi_device_ius(sdev) && 138 !scsi_device_qas(sdev)) 139 factor = MPT_ULTRA160; 140 else { 141 factor = MPT_ULTRA320; 142 if (scsi_device_qas(sdev)) { 143 ddvprintk(ioc, 144 printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to " 145 "byte56=%02x on id=%d!\n", ioc->name, 146 scsi_device_qas(sdev), id)); 147 noQas = 0; 148 } 149 if (sdev->type == TYPE_TAPE && 150 scsi_device_ius(sdev)) 151 target->negoFlags |= MPT_TAPE_NEGO_IDP; 152 } 153 } 154 offset = pspi_data->maxSyncOffset; 155 156 /* If RAID, never disable QAS 157 * else if non RAID, do not disable 158 * QAS if bit 1 is set 159 * bit 1 QAS support, non-raid only 160 * bit 0 IU support 161 */ 162 if (target->raidVolume == 1) 163 noQas = 0; 164 } else { 165 factor = MPT_ASYNC; 166 offset = 0; 167 } 168 } 169 170 if (!sdev->tagged_supported) 171 target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; 172 173 /* Update tflags based on NVRAM settings. (SCSI only) 174 */ 175 if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { 176 nvram = pspi_data->nvram[id]; 177 nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; 178 179 if (width) 180 width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; 181 182 if (offset > 0) { 183 /* Ensure factor is set to the 184 * maximum of: adapter, nvram, inquiry 185 */ 186 if (nfactor) { 187 if (nfactor < pspi_data->minSyncFactor ) 188 nfactor = pspi_data->minSyncFactor; 189 190 factor = max(factor, nfactor); 191 if (factor == MPT_ASYNC) 192 offset = 0; 193 } else { 194 offset = 0; 195 factor = MPT_ASYNC; 196 } 197 } else { 198 factor = MPT_ASYNC; 199 } 200 } 201 202 /* Make sure data is consistent 203 */ 204 if ((!width) && (factor < MPT_ULTRA2)) 205 factor = MPT_ULTRA2; 206 207 /* Save the data to the target structure. 208 */ 209 target->minSyncFactor = factor; 210 target->maxOffset = offset; 211 target->maxWidth = width; 212 213 spi_min_period(scsi_target(sdev)) = factor; 214 spi_max_offset(scsi_target(sdev)) = offset; 215 spi_max_width(scsi_target(sdev)) = width; 216 217 target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; 218 219 /* Disable unused features. 220 */ 221 if (!width) 222 target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; 223 224 if (!offset) 225 target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; 226 227 if ( factor > MPT_ULTRA320 ) 228 noQas = 0; 229 230 if (noQas && (pspi_data->noQas == 0)) { 231 pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; 232 target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; 233 234 /* Disable QAS in a mixed configuration case 235 */ 236 237 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 238 "Disabling QAS due to noQas=%02x on id=%d!\n", ioc->name, noQas, id)); 239 } 240 } 241 242 /** 243 * mptspi_writeIOCPage4 - write IOC Page 4 244 * @hd: Pointer to a SCSI Host Structure 245 * @channel: channel number 246 * @id: write IOC Page4 for this ID & Bus 247 * 248 * Return: -EAGAIN if unable to obtain a Message Frame 249 * or 0 if success. 250 * 251 * Remark: We do not wait for a return, write pages sequentially. 252 **/ 253 static int 254 mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) 255 { 256 MPT_ADAPTER *ioc = hd->ioc; 257 Config_t *pReq; 258 IOCPage4_t *IOCPage4Ptr; 259 MPT_FRAME_HDR *mf; 260 dma_addr_t dataDma; 261 u32 flagsLength; 262 int ii; 263 264 /* Get a MF for this command. 265 */ 266 if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { 267 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT 268 "writeIOCPage4 : no msg frames!\n",ioc->name)); 269 return -EAGAIN; 270 } 271 272 /* Set the request and the data pointers. 273 * Place data at end of MF. 274 */ 275 pReq = (Config_t *)mf; 276 277 /* Complete the request frame (same for all requests). 278 */ 279 pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 280 pReq->Reserved = 0; 281 pReq->ChainOffset = 0; 282 pReq->Function = MPI_FUNCTION_CONFIG; 283 pReq->ExtPageLength = 0; 284 pReq->ExtPageType = 0; 285 pReq->MsgFlags = 0; 286 for (ii=0; ii < 8; ii++) { 287 pReq->Reserved2[ii] = 0; 288 } 289 290 IOCPage4Ptr = ioc->spi_data.pIocPg4; 291 dataDma = ioc->spi_data.IocPg4_dma; 292 ii = IOCPage4Ptr->ActiveSEP++; 293 IOCPage4Ptr->SEP[ii].SEPTargetID = id; 294 IOCPage4Ptr->SEP[ii].SEPBus = channel; 295 pReq->Header = IOCPage4Ptr->Header; 296 pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); 297 298 /* Add a SGE to the config request. 299 */ 300 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | 301 (IOCPage4Ptr->Header.PageLength + ii) * 4; 302 303 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); 304 305 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 306 "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", 307 ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel)); 308 309 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); 310 311 return 0; 312 } 313 314 /** 315 * mptspi_initTarget - Target, LUN alloc/free functionality. 316 * @hd: Pointer to MPT_SCSI_HOST structure 317 * @vtarget: per target private data 318 * @sdev: SCSI device 319 * 320 * NOTE: It's only SAFE to call this routine if data points to 321 * sane & valid STANDARD INQUIRY data! 322 * 323 * Allocate and initialize memory for this target. 324 * Save inquiry data. 325 * 326 **/ 327 static void 328 mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, 329 struct scsi_device *sdev) 330 { 331 332 /* Is LUN supported? If so, upper 2 bits will be 0 333 * in first byte of inquiry data. 334 */ 335 if (sdev->inq_periph_qual != 0) 336 return; 337 338 if (vtarget == NULL) 339 return; 340 341 vtarget->type = sdev->type; 342 343 if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { 344 /* Treat all Processors as SAF-TE if 345 * command line option is set */ 346 vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; 347 mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); 348 }else if ((sdev->type == TYPE_PROCESSOR) && 349 !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { 350 if (sdev->inquiry_len > 49 ) { 351 if (sdev->inquiry[44] == 'S' && 352 sdev->inquiry[45] == 'A' && 353 sdev->inquiry[46] == 'F' && 354 sdev->inquiry[47] == '-' && 355 sdev->inquiry[48] == 'T' && 356 sdev->inquiry[49] == 'E' ) { 357 vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; 358 mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); 359 } 360 } 361 } 362 mptspi_setTargetNegoParms(hd, vtarget, sdev); 363 } 364 365 /** 366 * mptspi_is_raid - Determines whether target is belonging to volume 367 * @hd: Pointer to a SCSI HOST structure 368 * @id: target device id 369 * 370 * Return: 371 * non-zero = true 372 * zero = false 373 * 374 */ 375 static int 376 mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id) 377 { 378 int i, rc = 0; 379 MPT_ADAPTER *ioc = hd->ioc; 380 381 if (!ioc->raid_data.pIocPg2) 382 goto out; 383 384 if (!ioc->raid_data.pIocPg2->NumActiveVolumes) 385 goto out; 386 for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { 387 if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) { 388 rc = 1; 389 goto out; 390 } 391 } 392 393 out: 394 return rc; 395 } 396 397 static int mptspi_target_alloc(struct scsi_target *starget) 398 { 399 struct Scsi_Host *shost = dev_to_shost(&starget->dev); 400 struct _MPT_SCSI_HOST *hd = shost_priv(shost); 401 VirtTarget *vtarget; 402 MPT_ADAPTER *ioc; 403 404 if (hd == NULL) 405 return -ENODEV; 406 407 ioc = hd->ioc; 408 vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); 409 if (!vtarget) 410 return -ENOMEM; 411 412 vtarget->ioc_id = ioc->id; 413 vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; 414 vtarget->id = (u8)starget->id; 415 vtarget->channel = (u8)starget->channel; 416 vtarget->starget = starget; 417 starget->hostdata = vtarget; 418 419 if (starget->channel == 1) { 420 if (mptscsih_is_phys_disk(ioc, 0, starget->id) == 0) 421 return 0; 422 vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; 423 /* The real channel for this device is zero */ 424 vtarget->channel = 0; 425 /* The actual physdisknum (for RAID passthrough) */ 426 vtarget->id = mptscsih_raid_id_to_num(ioc, 0, 427 starget->id); 428 } 429 430 if (starget->channel == 0 && 431 mptspi_is_raid(hd, starget->id)) { 432 vtarget->raidVolume = 1; 433 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 434 "RAID Volume @ channel=%d id=%d\n", ioc->name, starget->channel, 435 starget->id)); 436 } 437 438 if (ioc->spi_data.nvram && 439 ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) { 440 u32 nvram = ioc->spi_data.nvram[starget->id]; 441 spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; 442 spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; 443 } else { 444 spi_min_period(starget) = ioc->spi_data.minSyncFactor; 445 spi_max_width(starget) = ioc->spi_data.maxBusWidth; 446 } 447 spi_max_offset(starget) = ioc->spi_data.maxSyncOffset; 448 449 spi_offset(starget) = 0; 450 spi_period(starget) = 0xFF; 451 mptspi_write_width(starget, 0); 452 453 return 0; 454 } 455 456 static void 457 mptspi_target_destroy(struct scsi_target *starget) 458 { 459 kfree(starget->hostdata); 460 starget->hostdata = NULL; 461 } 462 463 /** 464 * mptspi_print_write_nego - negotiation parameters debug info that is being sent 465 * @hd: Pointer to a SCSI HOST structure 466 * @starget: SCSI target 467 * @ii: negotiation parameters 468 * 469 */ 470 static void 471 mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) 472 { 473 ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x" 474 " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", 475 hd->ioc->name, starget->id, ii, 476 ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", 477 ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), 478 ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", 479 ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", 480 ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", 481 ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", 482 ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", 483 ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", 484 ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", 485 ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); 486 } 487 488 /** 489 * mptspi_print_read_nego - negotiation parameters debug info that is being read 490 * @hd: Pointer to a SCSI HOST structure 491 * @starget: SCSI target 492 * @ii: negotiation parameters 493 * 494 */ 495 static void 496 mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) 497 { 498 ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x" 499 " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", 500 hd->ioc->name, starget->id, ii, 501 ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", 502 ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), 503 ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", 504 ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", 505 ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", 506 ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", 507 ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", 508 ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", 509 ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", 510 ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); 511 } 512 513 static int mptspi_read_spi_device_pg0(struct scsi_target *starget, 514 struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0) 515 { 516 struct Scsi_Host *shost = dev_to_shost(&starget->dev); 517 struct _MPT_SCSI_HOST *hd = shost_priv(shost); 518 struct _MPT_ADAPTER *ioc = hd->ioc; 519 struct _CONFIG_PAGE_SCSI_DEVICE_0 *spi_dev_pg0; 520 dma_addr_t spi_dev_pg0_dma; 521 int size; 522 struct _x_config_parms cfg; 523 struct _CONFIG_PAGE_HEADER hdr; 524 int err = -EBUSY; 525 526 /* No SPI parameters for RAID devices */ 527 if (starget->channel == 0 && 528 mptspi_is_raid(hd, starget->id)) 529 return -1; 530 531 size = ioc->spi_data.sdp0length * 4; 532 /* 533 if (ioc->spi_data.sdp0length & 1) 534 size += size + 4; 535 size += 2048; 536 */ 537 538 spi_dev_pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &spi_dev_pg0_dma, GFP_KERNEL); 539 if (spi_dev_pg0 == NULL) { 540 starget_printk(KERN_ERR, starget, MYIOC_s_FMT 541 "dma_alloc_coherent for parameters failed\n", ioc->name); 542 return -EINVAL; 543 } 544 545 memset(&hdr, 0, sizeof(hdr)); 546 547 hdr.PageVersion = ioc->spi_data.sdp0version; 548 hdr.PageLength = ioc->spi_data.sdp0length; 549 hdr.PageNumber = 0; 550 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 551 552 memset(&cfg, 0, sizeof(cfg)); 553 554 cfg.cfghdr.hdr = &hdr; 555 cfg.physAddr = spi_dev_pg0_dma; 556 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 557 cfg.dir = 0; 558 cfg.pageAddr = starget->id; 559 cfg.timeout = 60; 560 561 if (mpt_config(ioc, &cfg)) { 562 starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name); 563 goto out_free; 564 } 565 err = 0; 566 memcpy(pass_pg0, spi_dev_pg0, size); 567 568 mptspi_print_read_nego(hd, starget, le32_to_cpu(spi_dev_pg0->NegotiatedParameters)); 569 570 out_free: 571 dma_free_coherent(&ioc->pcidev->dev, size, spi_dev_pg0, spi_dev_pg0_dma); 572 return err; 573 } 574 575 static u32 mptspi_getRP(struct scsi_target *starget) 576 { 577 u32 nego = 0; 578 579 nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0; 580 nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0; 581 nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0; 582 nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0; 583 nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0; 584 nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0; 585 nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0; 586 nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0; 587 588 nego |= (spi_period(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; 589 nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; 590 nego |= spi_width(starget) ? MPI_SCSIDEVPAGE1_RP_WIDE : 0; 591 592 return nego; 593 } 594 595 static void mptspi_read_parameters(struct scsi_target *starget) 596 { 597 int nego; 598 struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0; 599 600 mptspi_read_spi_device_pg0(starget, &spi_dev_pg0); 601 602 nego = le32_to_cpu(spi_dev_pg0.NegotiatedParameters); 603 604 spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0; 605 spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0; 606 spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0; 607 spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0; 608 spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0; 609 spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0; 610 spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0; 611 spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0; 612 spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD; 613 spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET; 614 spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0; 615 } 616 617 static int 618 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id) 619 { 620 MPT_ADAPTER *ioc = hd->ioc; 621 MpiRaidActionRequest_t *pReq; 622 MPT_FRAME_HDR *mf; 623 int ret; 624 unsigned long timeleft; 625 626 mutex_lock(&ioc->internal_cmds.mutex); 627 628 /* Get and Populate a free Frame 629 */ 630 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { 631 dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT 632 "%s: no msg frames!\n", ioc->name, __func__)); 633 ret = -EAGAIN; 634 goto out; 635 } 636 pReq = (MpiRaidActionRequest_t *)mf; 637 if (quiesce) 638 pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO; 639 else 640 pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO; 641 pReq->Reserved1 = 0; 642 pReq->ChainOffset = 0; 643 pReq->Function = MPI_FUNCTION_RAID_ACTION; 644 pReq->VolumeID = id; 645 pReq->VolumeBus = channel; 646 pReq->PhysDiskNum = 0; 647 pReq->MsgFlags = 0; 648 pReq->Reserved2 = 0; 649 pReq->ActionDataWord = 0; /* Reserved for this action */ 650 651 ioc->add_sge((char *)&pReq->ActionDataSGE, 652 MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); 653 654 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n", 655 ioc->name, pReq->Action, channel, id)); 656 657 INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status) 658 mpt_put_msg_frame(ioc->InternalCtx, ioc, mf); 659 timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ); 660 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 661 ret = -ETIME; 662 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n", 663 ioc->name, __func__)); 664 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 665 goto out; 666 if (!timeleft) { 667 printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", 668 ioc->name, __func__); 669 mpt_HardResetHandler(ioc, CAN_SLEEP); 670 mpt_free_msg_frame(ioc, mf); 671 } 672 goto out; 673 } 674 675 ret = ioc->internal_cmds.completion_code; 676 677 out: 678 CLEAR_MGMT_STATUS(ioc->internal_cmds.status) 679 mutex_unlock(&ioc->internal_cmds.mutex); 680 return ret; 681 } 682 683 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, 684 struct scsi_device *sdev) 685 { 686 VirtTarget *vtarget = scsi_target(sdev)->hostdata; 687 MPT_ADAPTER *ioc = hd->ioc; 688 689 /* no DV on RAID devices */ 690 if (sdev->channel == 0 && 691 mptspi_is_raid(hd, sdev->id)) 692 return; 693 694 /* If this is a piece of a RAID, then quiesce first */ 695 if (sdev->channel == 1 && 696 mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) { 697 starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT 698 "Integrated RAID quiesce failed\n", ioc->name); 699 return; 700 } 701 702 hd->spi_pending |= (1 << sdev->id); 703 spi_dv_device(sdev); 704 hd->spi_pending &= ~(1 << sdev->id); 705 706 if (sdev->channel == 1 && 707 mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0) 708 starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT 709 "Integrated RAID resume failed\n", ioc->name); 710 711 mptspi_read_parameters(sdev->sdev_target); 712 spi_display_xfer_agreement(sdev->sdev_target); 713 mptspi_read_parameters(sdev->sdev_target); 714 } 715 716 static int mptspi_slave_alloc(struct scsi_device *sdev) 717 { 718 MPT_SCSI_HOST *hd = shost_priv(sdev->host); 719 VirtTarget *vtarget; 720 VirtDevice *vdevice; 721 struct scsi_target *starget; 722 MPT_ADAPTER *ioc = hd->ioc; 723 724 if (sdev->channel == 1 && 725 mptscsih_is_phys_disk(ioc, 0, sdev->id) == 0) 726 return -ENXIO; 727 728 vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL); 729 if (!vdevice) { 730 printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", 731 ioc->name, sizeof(VirtDevice)); 732 return -ENOMEM; 733 } 734 735 vdevice->lun = sdev->lun; 736 sdev->hostdata = vdevice; 737 738 starget = scsi_target(sdev); 739 vtarget = starget->hostdata; 740 vdevice->vtarget = vtarget; 741 vtarget->num_luns++; 742 743 if (sdev->channel == 1) 744 sdev->no_uld_attach = 1; 745 746 return 0; 747 } 748 749 static int mptspi_slave_configure(struct scsi_device *sdev) 750 { 751 struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host); 752 VirtTarget *vtarget = scsi_target(sdev)->hostdata; 753 int ret; 754 755 mptspi_initTarget(hd, vtarget, sdev); 756 757 ret = mptscsih_slave_configure(sdev); 758 759 if (ret) 760 return ret; 761 762 ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x" 763 " max_offset=0x%02x max_width=%d\n", hd->ioc->name, 764 sdev->id, spi_min_period(scsi_target(sdev)), 765 spi_max_offset(scsi_target(sdev)), 766 spi_max_width(scsi_target(sdev)))); 767 768 if ((sdev->channel == 1 || 769 !(mptspi_is_raid(hd, sdev->id))) && 770 !spi_initial_dv(sdev->sdev_target)) 771 mptspi_dv_device(hd, sdev); 772 773 return 0; 774 } 775 776 static int 777 mptspi_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt) 778 { 779 struct _MPT_SCSI_HOST *hd = shost_priv(shost); 780 VirtDevice *vdevice = SCpnt->device->hostdata; 781 MPT_ADAPTER *ioc = hd->ioc; 782 783 if (!vdevice || !vdevice->vtarget) { 784 SCpnt->result = DID_NO_CONNECT << 16; 785 scsi_done(SCpnt); 786 return 0; 787 } 788 789 if (SCpnt->device->channel == 1 && 790 mptscsih_is_phys_disk(ioc, 0, SCpnt->device->id) == 0) { 791 SCpnt->result = DID_NO_CONNECT << 16; 792 scsi_done(SCpnt); 793 return 0; 794 } 795 796 if (spi_dv_pending(scsi_target(SCpnt->device))) 797 ddvprintk(ioc, scsi_print_command(SCpnt)); 798 799 return mptscsih_qcmd(SCpnt); 800 } 801 802 static void mptspi_slave_destroy(struct scsi_device *sdev) 803 { 804 struct scsi_target *starget = scsi_target(sdev); 805 VirtTarget *vtarget = starget->hostdata; 806 VirtDevice *vdevice = sdev->hostdata; 807 808 /* Will this be the last lun on a non-raid device? */ 809 if (vtarget->num_luns == 1 && vdevice->configured_lun) { 810 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 811 812 /* Async Narrow */ 813 pg1.RequestedParameters = 0; 814 pg1.Reserved = 0; 815 pg1.Configuration = 0; 816 817 mptspi_write_spi_device_pg1(starget, &pg1); 818 } 819 820 mptscsih_slave_destroy(sdev); 821 } 822 823 static const struct scsi_host_template mptspi_driver_template = { 824 .module = THIS_MODULE, 825 .proc_name = "mptspi", 826 .show_info = mptscsih_show_info, 827 .name = "MPT SPI Host", 828 .info = mptscsih_info, 829 .queuecommand = mptspi_qcmd, 830 .target_alloc = mptspi_target_alloc, 831 .slave_alloc = mptspi_slave_alloc, 832 .slave_configure = mptspi_slave_configure, 833 .target_destroy = mptspi_target_destroy, 834 .slave_destroy = mptspi_slave_destroy, 835 .change_queue_depth = mptscsih_change_queue_depth, 836 .eh_abort_handler = mptscsih_abort, 837 .eh_device_reset_handler = mptscsih_dev_reset, 838 .eh_bus_reset_handler = mptscsih_bus_reset, 839 .eh_host_reset_handler = mptscsih_host_reset, 840 .bios_param = mptscsih_bios_param, 841 .can_queue = MPT_SCSI_CAN_QUEUE, 842 .this_id = -1, 843 .sg_tablesize = MPT_SCSI_SG_DEPTH, 844 .max_sectors = 8192, 845 .cmd_per_lun = 7, 846 .dma_alignment = 511, 847 .shost_groups = mptscsih_host_attr_groups, 848 }; 849 850 static int mptspi_write_spi_device_pg1(struct scsi_target *starget, 851 struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1) 852 { 853 struct Scsi_Host *shost = dev_to_shost(&starget->dev); 854 struct _MPT_SCSI_HOST *hd = shost_priv(shost); 855 struct _MPT_ADAPTER *ioc = hd->ioc; 856 struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1; 857 dma_addr_t pg1_dma; 858 int size; 859 struct _x_config_parms cfg; 860 struct _CONFIG_PAGE_HEADER hdr; 861 int err = -EBUSY; 862 u32 nego_parms; 863 u32 period; 864 struct scsi_device *sdev; 865 int i; 866 867 /* don't allow updating nego parameters on RAID devices */ 868 if (starget->channel == 0 && 869 mptspi_is_raid(hd, starget->id)) 870 return -1; 871 872 size = ioc->spi_data.sdp1length * 4; 873 874 pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL); 875 if (pg1 == NULL) { 876 starget_printk(KERN_ERR, starget, MYIOC_s_FMT 877 "dma_alloc_coherent for parameters failed\n", ioc->name); 878 return -EINVAL; 879 } 880 881 memset(&hdr, 0, sizeof(hdr)); 882 883 hdr.PageVersion = ioc->spi_data.sdp1version; 884 hdr.PageLength = ioc->spi_data.sdp1length; 885 hdr.PageNumber = 1; 886 hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 887 888 memset(&cfg, 0, sizeof(cfg)); 889 890 cfg.cfghdr.hdr = &hdr; 891 cfg.physAddr = pg1_dma; 892 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 893 cfg.dir = 1; 894 cfg.pageAddr = starget->id; 895 896 memcpy(pg1, pass_pg1, size); 897 898 pg1->Header.PageVersion = hdr.PageVersion; 899 pg1->Header.PageLength = hdr.PageLength; 900 pg1->Header.PageNumber = hdr.PageNumber; 901 pg1->Header.PageType = hdr.PageType; 902 903 nego_parms = le32_to_cpu(pg1->RequestedParameters); 904 period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >> 905 MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD; 906 if (period == 8) { 907 /* Turn on inline data padding for TAPE when running U320 */ 908 for (i = 0 ; i < 16; i++) { 909 sdev = scsi_device_lookup_by_target(starget, i); 910 if (sdev && sdev->type == TYPE_TAPE) { 911 sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT 912 "IDP:ON\n", ioc->name); 913 nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP; 914 pg1->RequestedParameters = 915 cpu_to_le32(nego_parms); 916 break; 917 } 918 } 919 } 920 921 mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters)); 922 923 if (mpt_config(ioc, &cfg)) { 924 starget_printk(KERN_ERR, starget, MYIOC_s_FMT 925 "mpt_config failed\n", ioc->name); 926 goto out_free; 927 } 928 err = 0; 929 930 out_free: 931 dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma); 932 return err; 933 } 934 935 static void mptspi_write_offset(struct scsi_target *starget, int offset) 936 { 937 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 938 u32 nego; 939 940 if (offset < 0) 941 offset = 0; 942 943 if (offset > 255) 944 offset = 255; 945 946 if (spi_offset(starget) == -1) 947 mptspi_read_parameters(starget); 948 949 spi_offset(starget) = offset; 950 951 nego = mptspi_getRP(starget); 952 953 pg1.RequestedParameters = cpu_to_le32(nego); 954 pg1.Reserved = 0; 955 pg1.Configuration = 0; 956 957 mptspi_write_spi_device_pg1(starget, &pg1); 958 } 959 960 static void mptspi_write_period(struct scsi_target *starget, int period) 961 { 962 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 963 u32 nego; 964 965 if (period < 8) 966 period = 8; 967 968 if (period > 255) 969 period = 255; 970 971 if (spi_period(starget) == -1) 972 mptspi_read_parameters(starget); 973 974 if (period == 8) { 975 spi_iu(starget) = 1; 976 spi_dt(starget) = 1; 977 } else if (period == 9) { 978 spi_dt(starget) = 1; 979 } 980 981 spi_period(starget) = period; 982 983 nego = mptspi_getRP(starget); 984 985 pg1.RequestedParameters = cpu_to_le32(nego); 986 pg1.Reserved = 0; 987 pg1.Configuration = 0; 988 989 mptspi_write_spi_device_pg1(starget, &pg1); 990 } 991 992 static void mptspi_write_dt(struct scsi_target *starget, int dt) 993 { 994 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 995 u32 nego; 996 997 if (spi_period(starget) == -1) 998 mptspi_read_parameters(starget); 999 1000 if (!dt && spi_period(starget) < 10) 1001 spi_period(starget) = 10; 1002 1003 spi_dt(starget) = dt; 1004 1005 nego = mptspi_getRP(starget); 1006 1007 1008 pg1.RequestedParameters = cpu_to_le32(nego); 1009 pg1.Reserved = 0; 1010 pg1.Configuration = 0; 1011 1012 mptspi_write_spi_device_pg1(starget, &pg1); 1013 } 1014 1015 static void mptspi_write_iu(struct scsi_target *starget, int iu) 1016 { 1017 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 1018 u32 nego; 1019 1020 if (spi_period(starget) == -1) 1021 mptspi_read_parameters(starget); 1022 1023 if (!iu && spi_period(starget) < 9) 1024 spi_period(starget) = 9; 1025 1026 spi_iu(starget) = iu; 1027 1028 nego = mptspi_getRP(starget); 1029 1030 pg1.RequestedParameters = cpu_to_le32(nego); 1031 pg1.Reserved = 0; 1032 pg1.Configuration = 0; 1033 1034 mptspi_write_spi_device_pg1(starget, &pg1); 1035 } 1036 1037 #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \ 1038 static void mptspi_write_##parm(struct scsi_target *starget, int parm)\ 1039 { \ 1040 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \ 1041 u32 nego; \ 1042 \ 1043 spi_##parm(starget) = parm; \ 1044 \ 1045 nego = mptspi_getRP(starget); \ 1046 \ 1047 pg1.RequestedParameters = cpu_to_le32(nego); \ 1048 pg1.Reserved = 0; \ 1049 pg1.Configuration = 0; \ 1050 \ 1051 mptspi_write_spi_device_pg1(starget, &pg1); \ 1052 } 1053 1054 MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm) 1055 MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow) 1056 MPTSPI_SIMPLE_TRANSPORT_PARM(rti) 1057 MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs) 1058 MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en) 1059 1060 static void mptspi_write_qas(struct scsi_target *starget, int qas) 1061 { 1062 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 1063 struct Scsi_Host *shost = dev_to_shost(&starget->dev); 1064 struct _MPT_SCSI_HOST *hd = shost_priv(shost); 1065 VirtTarget *vtarget = starget->hostdata; 1066 u32 nego; 1067 1068 if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) || 1069 hd->ioc->spi_data.noQas) 1070 spi_qas(starget) = 0; 1071 else 1072 spi_qas(starget) = qas; 1073 1074 nego = mptspi_getRP(starget); 1075 1076 pg1.RequestedParameters = cpu_to_le32(nego); 1077 pg1.Reserved = 0; 1078 pg1.Configuration = 0; 1079 1080 mptspi_write_spi_device_pg1(starget, &pg1); 1081 } 1082 1083 static void mptspi_write_width(struct scsi_target *starget, int width) 1084 { 1085 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 1086 u32 nego; 1087 1088 if (!width) { 1089 spi_dt(starget) = 0; 1090 if (spi_period(starget) < 10) 1091 spi_period(starget) = 10; 1092 } 1093 1094 spi_width(starget) = width; 1095 1096 nego = mptspi_getRP(starget); 1097 1098 pg1.RequestedParameters = cpu_to_le32(nego); 1099 pg1.Reserved = 0; 1100 pg1.Configuration = 0; 1101 1102 mptspi_write_spi_device_pg1(starget, &pg1); 1103 } 1104 1105 struct work_queue_wrapper { 1106 struct work_struct work; 1107 struct _MPT_SCSI_HOST *hd; 1108 int disk; 1109 }; 1110 1111 static void mpt_work_wrapper(struct work_struct *work) 1112 { 1113 struct work_queue_wrapper *wqw = 1114 container_of(work, struct work_queue_wrapper, work); 1115 struct _MPT_SCSI_HOST *hd = wqw->hd; 1116 MPT_ADAPTER *ioc = hd->ioc; 1117 struct Scsi_Host *shost = ioc->sh; 1118 struct scsi_device *sdev; 1119 int disk = wqw->disk; 1120 struct _CONFIG_PAGE_IOC_3 *pg3; 1121 1122 kfree(wqw); 1123 1124 mpt_findImVolumes(ioc); 1125 pg3 = ioc->raid_data.pIocPg3; 1126 if (!pg3) 1127 return; 1128 1129 shost_for_each_device(sdev,shost) { 1130 struct scsi_target *starget = scsi_target(sdev); 1131 VirtTarget *vtarget = starget->hostdata; 1132 1133 /* only want to search RAID components */ 1134 if (sdev->channel != 1) 1135 continue; 1136 1137 /* The id is the raid PhysDiskNum, even if 1138 * starget->id is the actual target address */ 1139 if(vtarget->id != disk) 1140 continue; 1141 1142 starget_printk(KERN_INFO, vtarget->starget, MYIOC_s_FMT 1143 "Integrated RAID requests DV of new device\n", ioc->name); 1144 mptspi_dv_device(hd, sdev); 1145 } 1146 shost_printk(KERN_INFO, shost, MYIOC_s_FMT 1147 "Integrated RAID detects new device %d\n", ioc->name, disk); 1148 scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, SCSI_SCAN_RESCAN); 1149 } 1150 1151 1152 static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk) 1153 { 1154 struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); 1155 MPT_ADAPTER *ioc = hd->ioc; 1156 1157 if (!wqw) { 1158 shost_printk(KERN_ERR, ioc->sh, MYIOC_s_FMT 1159 "Failed to act on RAID event for physical disk %d\n", 1160 ioc->name, disk); 1161 return; 1162 } 1163 INIT_WORK(&wqw->work, mpt_work_wrapper); 1164 wqw->hd = hd; 1165 wqw->disk = disk; 1166 1167 schedule_work(&wqw->work); 1168 } 1169 1170 static int 1171 mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) 1172 { 1173 u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; 1174 struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 1175 1176 if (ioc->bus_type != SPI) 1177 return 0; 1178 1179 if (hd && event == MPI_EVENT_INTEGRATED_RAID) { 1180 int reason 1181 = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; 1182 1183 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { 1184 int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; 1185 mpt_dv_raid(hd, disk); 1186 } 1187 } 1188 return mptscsih_event_process(ioc, pEvReply); 1189 } 1190 1191 static int 1192 mptspi_deny_binding(struct scsi_target *starget) 1193 { 1194 struct _MPT_SCSI_HOST *hd = 1195 (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata; 1196 return ((mptspi_is_raid(hd, starget->id)) && 1197 starget->channel == 0) ? 1 : 0; 1198 } 1199 1200 static struct spi_function_template mptspi_transport_functions = { 1201 .get_offset = mptspi_read_parameters, 1202 .set_offset = mptspi_write_offset, 1203 .show_offset = 1, 1204 .get_period = mptspi_read_parameters, 1205 .set_period = mptspi_write_period, 1206 .show_period = 1, 1207 .get_width = mptspi_read_parameters, 1208 .set_width = mptspi_write_width, 1209 .show_width = 1, 1210 .get_iu = mptspi_read_parameters, 1211 .set_iu = mptspi_write_iu, 1212 .show_iu = 1, 1213 .get_dt = mptspi_read_parameters, 1214 .set_dt = mptspi_write_dt, 1215 .show_dt = 1, 1216 .get_qas = mptspi_read_parameters, 1217 .set_qas = mptspi_write_qas, 1218 .show_qas = 1, 1219 .get_wr_flow = mptspi_read_parameters, 1220 .set_wr_flow = mptspi_write_wr_flow, 1221 .show_wr_flow = 1, 1222 .get_rd_strm = mptspi_read_parameters, 1223 .set_rd_strm = mptspi_write_rd_strm, 1224 .show_rd_strm = 1, 1225 .get_rti = mptspi_read_parameters, 1226 .set_rti = mptspi_write_rti, 1227 .show_rti = 1, 1228 .get_pcomp_en = mptspi_read_parameters, 1229 .set_pcomp_en = mptspi_write_pcomp_en, 1230 .show_pcomp_en = 1, 1231 .get_hold_mcs = mptspi_read_parameters, 1232 .set_hold_mcs = mptspi_write_hold_mcs, 1233 .show_hold_mcs = 1, 1234 .deny_binding = mptspi_deny_binding, 1235 }; 1236 1237 /**************************************************************************** 1238 * Supported hardware 1239 */ 1240 1241 static struct pci_device_id mptspi_pci_table[] = { 1242 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030, 1243 PCI_ANY_ID, PCI_ANY_ID }, 1244 { PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030, 1245 PCI_ANY_ID, PCI_ANY_ID }, 1246 { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035, 1247 PCI_ANY_ID, PCI_ANY_ID }, 1248 {0} /* Terminating entry */ 1249 }; 1250 MODULE_DEVICE_TABLE(pci, mptspi_pci_table); 1251 1252 1253 /* 1254 * renegotiate for a given target 1255 */ 1256 static void 1257 mptspi_dv_renegotiate_work(struct work_struct *work) 1258 { 1259 struct work_queue_wrapper *wqw = 1260 container_of(work, struct work_queue_wrapper, work); 1261 struct _MPT_SCSI_HOST *hd = wqw->hd; 1262 struct scsi_device *sdev; 1263 struct scsi_target *starget; 1264 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; 1265 u32 nego; 1266 MPT_ADAPTER *ioc = hd->ioc; 1267 1268 kfree(wqw); 1269 1270 if (hd->spi_pending) { 1271 shost_for_each_device(sdev, ioc->sh) { 1272 if (hd->spi_pending & (1 << sdev->id)) 1273 continue; 1274 starget = scsi_target(sdev); 1275 nego = mptspi_getRP(starget); 1276 pg1.RequestedParameters = cpu_to_le32(nego); 1277 pg1.Reserved = 0; 1278 pg1.Configuration = 0; 1279 mptspi_write_spi_device_pg1(starget, &pg1); 1280 } 1281 } else { 1282 shost_for_each_device(sdev, ioc->sh) 1283 mptspi_dv_device(hd, sdev); 1284 } 1285 } 1286 1287 static void 1288 mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd) 1289 { 1290 struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); 1291 1292 if (!wqw) 1293 return; 1294 1295 INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work); 1296 wqw->hd = hd; 1297 1298 schedule_work(&wqw->work); 1299 } 1300 1301 /* 1302 * spi module reset handler 1303 */ 1304 static int 1305 mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 1306 { 1307 int rc; 1308 1309 rc = mptscsih_ioc_reset(ioc, reset_phase); 1310 if ((ioc->bus_type != SPI) || (!rc)) 1311 return rc; 1312 1313 /* only try to do a renegotiation if we're properly set up 1314 * if we get an ioc fault on bringup, ioc->sh will be NULL */ 1315 if (reset_phase == MPT_IOC_POST_RESET && 1316 ioc->sh) { 1317 struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 1318 1319 mptspi_dv_renegotiate(hd); 1320 } 1321 1322 return rc; 1323 } 1324 1325 #ifdef CONFIG_PM 1326 /* 1327 * spi module resume handler 1328 */ 1329 static int 1330 mptspi_resume(struct pci_dev *pdev) 1331 { 1332 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1333 struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); 1334 int rc; 1335 1336 rc = mptscsih_resume(pdev); 1337 mptspi_dv_renegotiate(hd); 1338 1339 return rc; 1340 } 1341 #endif 1342 1343 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1344 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1345 /* 1346 * mptspi_probe - Installs scsi devices per bus. 1347 * @pdev: Pointer to pci_dev structure 1348 * 1349 * Returns 0 for success, non-zero for failure. 1350 * 1351 */ 1352 static int 1353 mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) 1354 { 1355 struct Scsi_Host *sh; 1356 MPT_SCSI_HOST *hd; 1357 MPT_ADAPTER *ioc; 1358 unsigned long flags; 1359 int ii; 1360 int numSGE = 0; 1361 int scale; 1362 int ioc_cap; 1363 int error=0; 1364 int r; 1365 1366 if ((r = mpt_attach(pdev,id)) != 0) 1367 return r; 1368 1369 ioc = pci_get_drvdata(pdev); 1370 ioc->DoneCtx = mptspiDoneCtx; 1371 ioc->TaskCtx = mptspiTaskCtx; 1372 ioc->InternalCtx = mptspiInternalCtx; 1373 1374 /* Added sanity check on readiness of the MPT adapter. 1375 */ 1376 if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { 1377 printk(MYIOC_s_WARN_FMT 1378 "Skipping because it's not operational!\n", 1379 ioc->name); 1380 error = -ENODEV; 1381 goto out_mptspi_probe; 1382 } 1383 1384 if (!ioc->active) { 1385 printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", 1386 ioc->name); 1387 error = -ENODEV; 1388 goto out_mptspi_probe; 1389 } 1390 1391 /* Sanity check - ensure at least 1 port is INITIATOR capable 1392 */ 1393 ioc_cap = 0; 1394 for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { 1395 if (ioc->pfacts[ii].ProtocolFlags & 1396 MPI_PORTFACTS_PROTOCOL_INITIATOR) 1397 ioc_cap ++; 1398 } 1399 1400 if (!ioc_cap) { 1401 printk(MYIOC_s_WARN_FMT 1402 "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", 1403 ioc->name, ioc); 1404 return 0; 1405 } 1406 1407 sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); 1408 1409 if (!sh) { 1410 printk(MYIOC_s_WARN_FMT 1411 "Unable to register controller with SCSI subsystem\n", 1412 ioc->name); 1413 error = -1; 1414 goto out_mptspi_probe; 1415 } 1416 1417 /* VMWare emulation doesn't properly implement WRITE_SAME 1418 */ 1419 if (pdev->subsystem_vendor == 0x15AD) 1420 sh->no_write_same = 1; 1421 1422 spin_lock_irqsave(&ioc->FreeQlock, flags); 1423 1424 /* Attach the SCSI Host to the IOC structure 1425 */ 1426 ioc->sh = sh; 1427 1428 sh->io_port = 0; 1429 sh->n_io_port = 0; 1430 sh->irq = 0; 1431 1432 /* set 16 byte cdb's */ 1433 sh->max_cmd_len = 16; 1434 1435 /* Yikes! This is important! 1436 * Otherwise, by default, linux 1437 * only scans target IDs 0-7! 1438 * pfactsN->MaxDevices unreliable 1439 * (not supported in early 1440 * versions of the FW). 1441 * max_id = 1 + actual max id, 1442 * max_lun = 1 + actual last lun, 1443 * see hosts.h :o( 1444 */ 1445 sh->max_id = ioc->devices_per_bus; 1446 1447 sh->max_lun = MPT_LAST_LUN + 1; 1448 /* 1449 * If RAID Firmware Detected, setup virtual channel 1450 */ 1451 if (ioc->ir_firmware) 1452 sh->max_channel = 1; 1453 else 1454 sh->max_channel = 0; 1455 sh->this_id = ioc->pfacts[0].PortSCSIID; 1456 1457 /* Required entry. 1458 */ 1459 sh->unique_id = ioc->id; 1460 1461 /* Verify that we won't exceed the maximum 1462 * number of chain buffers 1463 * We can optimize: ZZ = req_sz/sizeof(SGE) 1464 * For 32bit SGE's: 1465 * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ 1466 * + (req_sz - 64)/sizeof(SGE) 1467 * A slightly different algorithm is required for 1468 * 64bit SGEs. 1469 */ 1470 scale = ioc->req_sz/ioc->SGE_size; 1471 if (ioc->sg_addr_size == sizeof(u64)) { 1472 numSGE = (scale - 1) * 1473 (ioc->facts.MaxChainDepth-1) + scale + 1474 (ioc->req_sz - 60) / ioc->SGE_size; 1475 } else { 1476 numSGE = 1 + (scale - 1) * 1477 (ioc->facts.MaxChainDepth-1) + scale + 1478 (ioc->req_sz - 64) / ioc->SGE_size; 1479 } 1480 1481 if (numSGE < sh->sg_tablesize) { 1482 /* Reset this value */ 1483 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1484 "Resetting sg_tablesize to %d from %d\n", 1485 ioc->name, numSGE, sh->sg_tablesize)); 1486 sh->sg_tablesize = numSGE; 1487 } 1488 1489 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1490 1491 hd = shost_priv(sh); 1492 hd->ioc = ioc; 1493 1494 /* SCSI needs scsi_cmnd lookup table! 1495 * (with size equal to req_depth*PtrSz!) 1496 */ 1497 ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_KERNEL); 1498 if (!ioc->ScsiLookup) { 1499 error = -ENOMEM; 1500 goto out_mptspi_probe; 1501 } 1502 spin_lock_init(&ioc->scsi_lookup_lock); 1503 1504 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", 1505 ioc->name, ioc->ScsiLookup)); 1506 1507 ioc->spi_data.Saf_Te = mpt_saf_te; 1508 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1509 "saf_te %x\n", 1510 ioc->name, 1511 mpt_saf_te)); 1512 ioc->spi_data.noQas = 0; 1513 1514 hd->last_queue_full = 0; 1515 hd->spi_pending = 0; 1516 1517 /* Some versions of the firmware don't support page 0; without 1518 * that we can't get the parameters */ 1519 if (ioc->spi_data.sdp0length != 0) 1520 sh->transportt = mptspi_transport_template; 1521 1522 error = scsi_add_host (sh, &ioc->pcidev->dev); 1523 if(error) { 1524 dprintk(ioc, printk(MYIOC_s_ERR_FMT 1525 "scsi_add_host failed\n", ioc->name)); 1526 goto out_mptspi_probe; 1527 } 1528 1529 /* 1530 * issue internal bus reset 1531 */ 1532 if (ioc->spi_data.bus_reset) 1533 mptscsih_IssueTaskMgmt(hd, 1534 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 1535 0, 0, 0, 0, 5); 1536 1537 scsi_scan_host(sh); 1538 return 0; 1539 1540 out_mptspi_probe: 1541 1542 mptscsih_remove(pdev); 1543 return error; 1544 } 1545 1546 static void mptspi_remove(struct pci_dev *pdev) 1547 { 1548 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1549 1550 scsi_remove_host(ioc->sh); 1551 mptscsih_remove(pdev); 1552 } 1553 1554 static struct pci_driver mptspi_driver = { 1555 .name = "mptspi", 1556 .id_table = mptspi_pci_table, 1557 .probe = mptspi_probe, 1558 .remove = mptspi_remove, 1559 .shutdown = mptscsih_shutdown, 1560 #ifdef CONFIG_PM 1561 .suspend = mptscsih_suspend, 1562 .resume = mptspi_resume, 1563 #endif 1564 }; 1565 1566 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1567 /** 1568 * mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer. 1569 * 1570 * Returns 0 for success, non-zero for failure. 1571 */ 1572 static int __init 1573 mptspi_init(void) 1574 { 1575 int error; 1576 1577 show_mptmod_ver(my_NAME, my_VERSION); 1578 1579 mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions); 1580 if (!mptspi_transport_template) 1581 return -ENODEV; 1582 1583 mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER, 1584 "mptscsih_io_done"); 1585 mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER, 1586 "mptscsih_taskmgmt_complete"); 1587 mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, 1588 MPTSPI_DRIVER, "mptscsih_scandv_complete"); 1589 1590 mpt_event_register(mptspiDoneCtx, mptspi_event_process); 1591 mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset); 1592 1593 error = pci_register_driver(&mptspi_driver); 1594 if (error) 1595 spi_release_transport(mptspi_transport_template); 1596 1597 return error; 1598 } 1599 1600 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1601 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1602 /** 1603 * mptspi_exit - Unregisters MPT adapter(s) 1604 */ 1605 static void __exit 1606 mptspi_exit(void) 1607 { 1608 pci_unregister_driver(&mptspi_driver); 1609 1610 mpt_reset_deregister(mptspiDoneCtx); 1611 mpt_event_deregister(mptspiDoneCtx); 1612 1613 mpt_deregister(mptspiInternalCtx); 1614 mpt_deregister(mptspiTaskCtx); 1615 mpt_deregister(mptspiDoneCtx); 1616 spi_release_transport(mptspi_transport_template); 1617 } 1618 1619 module_init(mptspi_init); 1620 module_exit(mptspi_exit); 1621