1 /* 2 * linux/drivers/message/fusion/mptscsih.c 3 * For use with LSI PCI chip/adapter(s) 4 * running LSI Fusion MPT (Message Passing Technology) firmware. 5 * 6 * Copyright (c) 1999-2008 LSI Corporation 7 * (mailto:DL-MPTFusionLinux@lsi.com) 8 * 9 */ 10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 11 /* 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; version 2 of the License. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 NO WARRANTY 22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 26 solely responsible for determining the appropriateness of using and 27 distributing the Program and assumes all risks associated with its 28 exercise of rights under this Agreement, including but not limited to 29 the risks and costs of program errors, damage to or loss of data, 30 programs or equipment, and unavailability or interruption of operations. 31 32 DISCLAIMER OF LIABILITY 33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 40 41 You should have received a copy of the GNU General Public License 42 along with this program; if not, write to the Free Software 43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 44 */ 45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 46 47 #include <linux/module.h> 48 #include <linux/kernel.h> 49 #include <linux/slab.h> 50 #include <linux/init.h> 51 #include <linux/errno.h> 52 #include <linux/kdev_t.h> 53 #include <linux/blkdev.h> 54 #include <linux/delay.h> /* for mdelay */ 55 #include <linux/interrupt.h> /* needed for in_interrupt() proto */ 56 #include <linux/reboot.h> /* notifier code */ 57 #include <linux/workqueue.h> 58 59 #include <scsi/scsi.h> 60 #include <scsi/scsi_cmnd.h> 61 #include <scsi/scsi_device.h> 62 #include <scsi/scsi_host.h> 63 #include <scsi/scsi_tcq.h> 64 #include <scsi/scsi_dbg.h> 65 66 #include "mptbase.h" 67 #include "mptscsih.h" 68 #include "lsi/mpi_log_sas.h" 69 70 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 71 #define my_NAME "Fusion MPT SCSI Host driver" 72 #define my_VERSION MPT_LINUX_VERSION_COMMON 73 #define MYNAM "mptscsih" 74 75 MODULE_AUTHOR(MODULEAUTHOR); 76 MODULE_DESCRIPTION(my_NAME); 77 MODULE_LICENSE("GPL"); 78 MODULE_VERSION(my_VERSION); 79 80 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 81 /* 82 * Other private/forward protos... 83 */ 84 struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i); 85 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i); 86 static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd); 87 static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd); 88 int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); 89 static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq); 90 int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); 91 92 static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, 93 SCSIIORequest_t *pReq, int req_idx); 94 static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx); 95 static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply); 96 97 int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, 98 u64 lun, int ctx2abort, ulong timeout); 99 100 int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); 101 int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); 102 103 void 104 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code); 105 static int mptscsih_get_completion_code(MPT_ADAPTER *ioc, 106 MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); 107 int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); 108 static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); 109 static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice); 110 111 static int 112 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type, 113 SCSITaskMgmtReply_t *pScsiTmReply); 114 void mptscsih_remove(struct pci_dev *); 115 void mptscsih_shutdown(struct pci_dev *); 116 #ifdef CONFIG_PM 117 int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); 118 int mptscsih_resume(struct pci_dev *pdev); 119 #endif 120 121 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 123 /* 124 * mptscsih_getFreeChainBuffer - Function to get a free chain 125 * from the MPT_SCSI_HOST FreeChainQ. 126 * @ioc: Pointer to MPT_ADAPTER structure 127 * @req_idx: Index of the SCSI IO request frame. (output) 128 * 129 * return SUCCESS or FAILED 130 */ 131 static inline int 132 mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex) 133 { 134 MPT_FRAME_HDR *chainBuf; 135 unsigned long flags; 136 int rc; 137 int chain_idx; 138 139 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n", 140 ioc->name)); 141 spin_lock_irqsave(&ioc->FreeQlock, flags); 142 if (!list_empty(&ioc->FreeChainQ)) { 143 int offset; 144 145 chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR, 146 u.frame.linkage.list); 147 list_del(&chainBuf->u.frame.linkage.list); 148 offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer; 149 chain_idx = offset / ioc->req_sz; 150 rc = SUCCESS; 151 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT 152 "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n", 153 ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx)); 154 } else { 155 rc = FAILED; 156 chain_idx = MPT_HOST_NO_CHAIN; 157 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n", 158 ioc->name)); 159 } 160 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 161 162 *retIndex = chain_idx; 163 return rc; 164 } /* mptscsih_getFreeChainBuffer() */ 165 166 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 167 /* 168 * mptscsih_AddSGE - Add a SGE (plus chain buffers) to the 169 * SCSIIORequest_t Message Frame. 170 * @ioc: Pointer to MPT_ADAPTER structure 171 * @SCpnt: Pointer to scsi_cmnd structure 172 * @pReq: Pointer to SCSIIORequest_t structure 173 * 174 * Returns ... 175 */ 176 static int 177 mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, 178 SCSIIORequest_t *pReq, int req_idx) 179 { 180 char *psge; 181 char *chainSge; 182 struct scatterlist *sg; 183 int frm_sz; 184 int sges_left, sg_done; 185 int chain_idx = MPT_HOST_NO_CHAIN; 186 int sgeOffset; 187 int numSgeSlots, numSgeThisFrame; 188 u32 sgflags, sgdir, thisxfer = 0; 189 int chain_dma_off = 0; 190 int newIndex; 191 int ii; 192 dma_addr_t v2; 193 u32 RequestNB; 194 195 sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK; 196 if (sgdir == MPI_SCSIIO_CONTROL_WRITE) { 197 sgdir = MPT_TRANSFER_HOST_TO_IOC; 198 } else { 199 sgdir = MPT_TRANSFER_IOC_TO_HOST; 200 } 201 202 psge = (char *) &pReq->SGL; 203 frm_sz = ioc->req_sz; 204 205 /* Map the data portion, if any. 206 * sges_left = 0 if no data transfer. 207 */ 208 sges_left = scsi_dma_map(SCpnt); 209 if (sges_left < 0) 210 return FAILED; 211 212 /* Handle the SG case. 213 */ 214 sg = scsi_sglist(SCpnt); 215 sg_done = 0; 216 sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION); 217 chainSge = NULL; 218 219 /* Prior to entering this loop - the following must be set 220 * current MF: sgeOffset (bytes) 221 * chainSge (Null if original MF is not a chain buffer) 222 * sg_done (num SGE done for this MF) 223 */ 224 225 nextSGEset: 226 numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size); 227 numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots; 228 229 sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir; 230 231 /* Get first (num - 1) SG elements 232 * Skip any SG entries with a length of 0 233 * NOTE: at finish, sg and psge pointed to NEXT data/location positions 234 */ 235 for (ii=0; ii < (numSgeThisFrame-1); ii++) { 236 thisxfer = sg_dma_len(sg); 237 if (thisxfer == 0) { 238 /* Get next SG element from the OS */ 239 sg = sg_next(sg); 240 sg_done++; 241 continue; 242 } 243 244 v2 = sg_dma_address(sg); 245 ioc->add_sge(psge, sgflags | thisxfer, v2); 246 247 /* Get next SG element from the OS */ 248 sg = sg_next(sg); 249 psge += ioc->SGE_size; 250 sgeOffset += ioc->SGE_size; 251 sg_done++; 252 } 253 254 if (numSgeThisFrame == sges_left) { 255 /* Add last element, end of buffer and end of list flags. 256 */ 257 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT | 258 MPT_SGE_FLAGS_END_OF_BUFFER | 259 MPT_SGE_FLAGS_END_OF_LIST; 260 261 /* Add last SGE and set termination flags. 262 * Note: Last SGE may have a length of 0 - which should be ok. 263 */ 264 thisxfer = sg_dma_len(sg); 265 266 v2 = sg_dma_address(sg); 267 ioc->add_sge(psge, sgflags | thisxfer, v2); 268 sgeOffset += ioc->SGE_size; 269 sg_done++; 270 271 if (chainSge) { 272 /* The current buffer is a chain buffer, 273 * but there is not another one. 274 * Update the chain element 275 * Offset and Length fields. 276 */ 277 ioc->add_chain((char *)chainSge, 0, sgeOffset, 278 ioc->ChainBufferDMA + chain_dma_off); 279 } else { 280 /* The current buffer is the original MF 281 * and there is no Chain buffer. 282 */ 283 pReq->ChainOffset = 0; 284 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; 285 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT 286 "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); 287 ioc->RequestNB[req_idx] = RequestNB; 288 } 289 } else { 290 /* At least one chain buffer is needed. 291 * Complete the first MF 292 * - last SGE element, set the LastElement bit 293 * - set ChainOffset (words) for orig MF 294 * (OR finish previous MF chain buffer) 295 * - update MFStructPtr ChainIndex 296 * - Populate chain element 297 * Also 298 * Loop until done. 299 */ 300 301 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n", 302 ioc->name, sg_done)); 303 304 /* Set LAST_ELEMENT flag for last non-chain element 305 * in the buffer. Since psge points at the NEXT 306 * SGE element, go back one SGE element, update the flags 307 * and reset the pointer. (Note: sgflags & thisxfer are already 308 * set properly). 309 */ 310 if (sg_done) { 311 u32 *ptmp = (u32 *) (psge - ioc->SGE_size); 312 sgflags = le32_to_cpu(*ptmp); 313 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT; 314 *ptmp = cpu_to_le32(sgflags); 315 } 316 317 if (chainSge) { 318 /* The current buffer is a chain buffer. 319 * chainSge points to the previous Chain Element. 320 * Update its chain element Offset and Length (must 321 * include chain element size) fields. 322 * Old chain element is now complete. 323 */ 324 u8 nextChain = (u8) (sgeOffset >> 2); 325 sgeOffset += ioc->SGE_size; 326 ioc->add_chain((char *)chainSge, nextChain, sgeOffset, 327 ioc->ChainBufferDMA + chain_dma_off); 328 } else { 329 /* The original MF buffer requires a chain buffer - 330 * set the offset. 331 * Last element in this MF is a chain element. 332 */ 333 pReq->ChainOffset = (u8) (sgeOffset >> 2); 334 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; 335 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); 336 ioc->RequestNB[req_idx] = RequestNB; 337 } 338 339 sges_left -= sg_done; 340 341 342 /* NOTE: psge points to the beginning of the chain element 343 * in current buffer. Get a chain buffer. 344 */ 345 if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) { 346 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 347 "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n", 348 ioc->name, pReq->CDB[0], SCpnt)); 349 return FAILED; 350 } 351 352 /* Update the tracking arrays. 353 * If chainSge == NULL, update ReqToChain, else ChainToChain 354 */ 355 if (chainSge) { 356 ioc->ChainToChain[chain_idx] = newIndex; 357 } else { 358 ioc->ReqToChain[req_idx] = newIndex; 359 } 360 chain_idx = newIndex; 361 chain_dma_off = ioc->req_sz * chain_idx; 362 363 /* Populate the chainSGE for the current buffer. 364 * - Set chain buffer pointer to psge and fill 365 * out the Address and Flags fields. 366 */ 367 chainSge = (char *) psge; 368 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)", 369 ioc->name, psge, req_idx)); 370 371 /* Start the SGE for the next buffer 372 */ 373 psge = (char *) (ioc->ChainBuffer + chain_dma_off); 374 sgeOffset = 0; 375 sg_done = 0; 376 377 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n", 378 ioc->name, psge, chain_idx)); 379 380 /* Start the SGE for the next buffer 381 */ 382 383 goto nextSGEset; 384 } 385 386 return SUCCESS; 387 } /* mptscsih_AddSGE() */ 388 389 static void 390 mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget, 391 U32 SlotStatus) 392 { 393 MPT_FRAME_HDR *mf; 394 SEPRequest_t *SEPMsg; 395 396 if (ioc->bus_type != SAS) 397 return; 398 399 /* Not supported for hidden raid components 400 */ 401 if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 402 return; 403 404 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { 405 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n", 406 ioc->name,__func__)); 407 return; 408 } 409 410 SEPMsg = (SEPRequest_t *)mf; 411 SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; 412 SEPMsg->Bus = vtarget->channel; 413 SEPMsg->TargetID = vtarget->id; 414 SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS; 415 SEPMsg->SlotStatus = SlotStatus; 416 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 417 "Sending SEP cmd=%x channel=%d id=%d\n", 418 ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID)); 419 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); 420 } 421 422 #ifdef CONFIG_FUSION_LOGGING 423 /** 424 * mptscsih_info_scsiio - debug print info on reply frame 425 * @ioc: Pointer to MPT_ADAPTER structure 426 * @sc: original scsi cmnd pointer 427 * @pScsiReply: Pointer to MPT reply frame 428 * 429 * MPT_DEBUG_REPLY needs to be enabled to obtain this info 430 * 431 * Refer to lsi/mpi.h. 432 **/ 433 static void 434 mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply) 435 { 436 char *desc = NULL; 437 char *desc1 = NULL; 438 u16 ioc_status; 439 u8 skey, asc, ascq; 440 441 ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; 442 443 switch (ioc_status) { 444 445 case MPI_IOCSTATUS_SUCCESS: 446 desc = "success"; 447 break; 448 case MPI_IOCSTATUS_SCSI_INVALID_BUS: 449 desc = "invalid bus"; 450 break; 451 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: 452 desc = "invalid target_id"; 453 break; 454 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: 455 desc = "device not there"; 456 break; 457 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: 458 desc = "data overrun"; 459 break; 460 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: 461 desc = "data underrun"; 462 break; 463 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: 464 desc = "I/O data error"; 465 break; 466 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: 467 desc = "protocol error"; 468 break; 469 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: 470 desc = "task terminated"; 471 break; 472 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: 473 desc = "residual mismatch"; 474 break; 475 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: 476 desc = "task management failed"; 477 break; 478 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: 479 desc = "IOC terminated"; 480 break; 481 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: 482 desc = "ext terminated"; 483 break; 484 default: 485 desc = ""; 486 break; 487 } 488 489 switch (pScsiReply->SCSIStatus) 490 { 491 492 case MPI_SCSI_STATUS_SUCCESS: 493 desc1 = "success"; 494 break; 495 case MPI_SCSI_STATUS_CHECK_CONDITION: 496 desc1 = "check condition"; 497 break; 498 case MPI_SCSI_STATUS_CONDITION_MET: 499 desc1 = "condition met"; 500 break; 501 case MPI_SCSI_STATUS_BUSY: 502 desc1 = "busy"; 503 break; 504 case MPI_SCSI_STATUS_INTERMEDIATE: 505 desc1 = "intermediate"; 506 break; 507 case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET: 508 desc1 = "intermediate condmet"; 509 break; 510 case MPI_SCSI_STATUS_RESERVATION_CONFLICT: 511 desc1 = "reservation conflict"; 512 break; 513 case MPI_SCSI_STATUS_COMMAND_TERMINATED: 514 desc1 = "command terminated"; 515 break; 516 case MPI_SCSI_STATUS_TASK_SET_FULL: 517 desc1 = "task set full"; 518 break; 519 case MPI_SCSI_STATUS_ACA_ACTIVE: 520 desc1 = "aca active"; 521 break; 522 case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT: 523 desc1 = "fcpext device logged out"; 524 break; 525 case MPI_SCSI_STATUS_FCPEXT_NO_LINK: 526 desc1 = "fcpext no link"; 527 break; 528 case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED: 529 desc1 = "fcpext unassigned"; 530 break; 531 default: 532 desc1 = ""; 533 break; 534 } 535 536 scsi_print_command(sc); 537 printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n", 538 ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun); 539 printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, " 540 "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow, 541 scsi_get_resid(sc)); 542 printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, " 543 "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag), 544 le32_to_cpu(pScsiReply->TransferCount), sc->result); 545 546 printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), " 547 "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n", 548 ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus, 549 pScsiReply->SCSIState); 550 551 if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) { 552 skey = sc->sense_buffer[2] & 0x0F; 553 asc = sc->sense_buffer[12]; 554 ascq = sc->sense_buffer[13]; 555 556 printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: " 557 "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq); 558 } 559 560 /* 561 * Look for + dump FCP ResponseInfo[]! 562 */ 563 if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID && 564 pScsiReply->ResponseInfo) 565 printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n", 566 ioc->name, le32_to_cpu(pScsiReply->ResponseInfo)); 567 } 568 #endif 569 570 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 571 /* 572 * mptscsih_io_done - Main SCSI IO callback routine registered to 573 * Fusion MPT (base) driver 574 * @ioc: Pointer to MPT_ADAPTER structure 575 * @mf: Pointer to original MPT request frame 576 * @r: Pointer to MPT reply frame (NULL if TurboReply) 577 * 578 * This routine is called from mpt.c::mpt_interrupt() at the completion 579 * of any SCSI IO request. 580 * This routine is registered with the Fusion MPT (base) driver at driver 581 * load/init time via the mpt_register() API call. 582 * 583 * Returns 1 indicating alloc'd request frame ptr should be freed. 584 */ 585 int 586 mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) 587 { 588 struct scsi_cmnd *sc; 589 MPT_SCSI_HOST *hd; 590 SCSIIORequest_t *pScsiReq; 591 SCSIIOReply_t *pScsiReply; 592 u16 req_idx, req_idx_MR; 593 VirtDevice *vdevice; 594 VirtTarget *vtarget; 595 596 hd = shost_priv(ioc->sh); 597 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 598 req_idx_MR = (mr != NULL) ? 599 le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx; 600 601 /* Special case, where already freed message frame is received from 602 * Firmware. It happens with Resetting IOC. 603 * Return immediately. Do not care 604 */ 605 if ((req_idx != req_idx_MR) || 606 (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf)) 607 return 0; 608 609 sc = mptscsih_getclear_scsi_lookup(ioc, req_idx); 610 if (sc == NULL) { 611 MPIHeader_t *hdr = (MPIHeader_t *)mf; 612 613 /* Remark: writeSDP1 will use the ScsiDoneCtx 614 * If a SCSI I/O cmd, device disabled by OS and 615 * completion done. Cannot touch sc struct. Just free mem. 616 */ 617 if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST) 618 printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n", 619 ioc->name); 620 621 mptscsih_freeChainBuffers(ioc, req_idx); 622 return 1; 623 } 624 625 if ((unsigned char *)mf != sc->host_scribble) { 626 mptscsih_freeChainBuffers(ioc, req_idx); 627 return 1; 628 } 629 630 if (ioc->bus_type == SAS) { 631 VirtDevice *vdevice = sc->device->hostdata; 632 633 if (!vdevice || !vdevice->vtarget || 634 vdevice->vtarget->deleted) { 635 sc->result = DID_NO_CONNECT << 16; 636 goto out; 637 } 638 } 639 640 sc->host_scribble = NULL; 641 sc->result = DID_OK << 16; /* Set default reply as OK */ 642 pScsiReq = (SCSIIORequest_t *) mf; 643 pScsiReply = (SCSIIOReply_t *) mr; 644 645 if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){ 646 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT 647 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n", 648 ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag)); 649 }else{ 650 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT 651 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n", 652 ioc->name, mf, mr, sc, req_idx)); 653 } 654 655 if (pScsiReply == NULL) { 656 /* special context reply handling */ 657 ; 658 } else { 659 u32 xfer_cnt; 660 u16 status; 661 u8 scsi_state, scsi_status; 662 u32 log_info; 663 664 status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; 665 666 scsi_state = pScsiReply->SCSIState; 667 scsi_status = pScsiReply->SCSIStatus; 668 xfer_cnt = le32_to_cpu(pScsiReply->TransferCount); 669 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt); 670 log_info = le32_to_cpu(pScsiReply->IOCLogInfo); 671 672 /* 673 * if we get a data underrun indication, yet no data was 674 * transferred and the SCSI status indicates that the 675 * command was never started, change the data underrun 676 * to success 677 */ 678 if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && 679 (scsi_status == MPI_SCSI_STATUS_BUSY || 680 scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT || 681 scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) { 682 status = MPI_IOCSTATUS_SUCCESS; 683 } 684 685 if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) 686 mptscsih_copy_sense_data(sc, hd, mf, pScsiReply); 687 688 /* 689 * Look for + dump FCP ResponseInfo[]! 690 */ 691 if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID && 692 pScsiReply->ResponseInfo) { 693 printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] " 694 "FCP_ResponseInfo=%08xh\n", ioc->name, 695 sc->device->host->host_no, sc->device->channel, 696 sc->device->id, sc->device->lun, 697 le32_to_cpu(pScsiReply->ResponseInfo)); 698 } 699 700 switch(status) { 701 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 702 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 703 /* CHECKME! 704 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry) 705 * But not: DID_BUS_BUSY lest one risk 706 * killing interrupt handler:-( 707 */ 708 sc->result = SAM_STAT_BUSY; 709 break; 710 711 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 712 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 713 sc->result = DID_BAD_TARGET << 16; 714 break; 715 716 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 717 /* Spoof to SCSI Selection Timeout! */ 718 if (ioc->bus_type != FC) 719 sc->result = DID_NO_CONNECT << 16; 720 /* else fibre, just stall until rescan event */ 721 else 722 sc->result = DID_REQUEUE << 16; 723 724 if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF) 725 hd->sel_timeout[pScsiReq->TargetID]++; 726 727 vdevice = sc->device->hostdata; 728 if (!vdevice) 729 break; 730 vtarget = vdevice->vtarget; 731 if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) { 732 mptscsih_issue_sep_command(ioc, vtarget, 733 MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED); 734 vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON; 735 } 736 break; 737 738 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 739 if ( ioc->bus_type == SAS ) { 740 u16 ioc_status = 741 le16_to_cpu(pScsiReply->IOCStatus); 742 if ((ioc_status & 743 MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) 744 && 745 ((log_info & SAS_LOGINFO_MASK) == 746 SAS_LOGINFO_NEXUS_LOSS)) { 747 VirtDevice *vdevice = 748 sc->device->hostdata; 749 750 /* flag the device as being in 751 * device removal delay so we can 752 * notify the midlayer to hold off 753 * on timeout eh */ 754 if (vdevice && vdevice-> 755 vtarget && 756 vdevice->vtarget-> 757 raidVolume) 758 printk(KERN_INFO 759 "Skipping Raid Volume" 760 "for inDMD\n"); 761 else if (vdevice && 762 vdevice->vtarget) 763 vdevice->vtarget-> 764 inDMD = 1; 765 766 sc->result = 767 (DID_TRANSPORT_DISRUPTED 768 << 16); 769 break; 770 } 771 } else if (ioc->bus_type == FC) { 772 /* 773 * The FC IOC may kill a request for variety of 774 * reasons, some of which may be recovered by a 775 * retry, some which are unlikely to be 776 * recovered. Return DID_ERROR instead of 777 * DID_RESET to permit retry of the command, 778 * just not an infinite number of them 779 */ 780 sc->result = DID_ERROR << 16; 781 break; 782 } 783 784 /* 785 * Allow non-SAS & non-NEXUS_LOSS to drop into below code 786 */ 787 fallthrough; 788 789 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 790 /* Linux handles an unsolicited DID_RESET better 791 * than an unsolicited DID_ABORT. 792 */ 793 sc->result = DID_RESET << 16; 794 break; 795 796 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 797 if (ioc->bus_type == FC) 798 sc->result = DID_ERROR << 16; 799 else 800 sc->result = DID_RESET << 16; 801 break; 802 803 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 804 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt); 805 if((xfer_cnt==0)||(sc->underflow > xfer_cnt)) 806 sc->result=DID_SOFT_ERROR << 16; 807 else /* Sufficient data transfer occurred */ 808 sc->result = (DID_OK << 16) | scsi_status; 809 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT 810 "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n", 811 ioc->name, sc->result, sc->device->channel, sc->device->id)); 812 break; 813 814 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 815 /* 816 * Do upfront check for valid SenseData and give it 817 * precedence! 818 */ 819 sc->result = (DID_OK << 16) | scsi_status; 820 if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) { 821 822 /* 823 * For an Errata on LSI53C1030 824 * When the length of request data 825 * and transfer data are different 826 * with result of command (READ or VERIFY), 827 * DID_SOFT_ERROR is set. 828 */ 829 if (ioc->bus_type == SPI) { 830 if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) || 831 pScsiReq->CDB[0] == READ_10 || 832 pScsiReq->CDB[0] == READ_12 || 833 (pScsiReq->CDB[0] == READ_16 && 834 ((pScsiReq->CDB[1] & 0x02) == 0)) || 835 pScsiReq->CDB[0] == VERIFY || 836 pScsiReq->CDB[0] == VERIFY_16) { 837 if (scsi_bufflen(sc) != 838 xfer_cnt) { 839 sc->result = 840 DID_SOFT_ERROR << 16; 841 printk(KERN_WARNING "Errata" 842 "on LSI53C1030 occurred." 843 "sc->req_bufflen=0x%02x," 844 "xfer_cnt=0x%02x\n", 845 scsi_bufflen(sc), 846 xfer_cnt); 847 } 848 } 849 } 850 851 if (xfer_cnt < sc->underflow) { 852 if (scsi_status == SAM_STAT_BUSY) 853 sc->result = SAM_STAT_BUSY; 854 else 855 sc->result = DID_SOFT_ERROR << 16; 856 } 857 if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) { 858 /* What to do? 859 */ 860 sc->result = DID_SOFT_ERROR << 16; 861 } 862 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { 863 /* Not real sure here either... */ 864 sc->result = DID_RESET << 16; 865 } 866 } 867 868 869 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT 870 " sc->underflow={report ERR if < %02xh bytes xfer'd}\n", 871 ioc->name, sc->underflow)); 872 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT 873 " ActBytesXferd=%02xh\n", ioc->name, xfer_cnt)); 874 875 /* Report Queue Full 876 */ 877 if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL) 878 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); 879 880 break; 881 882 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 883 scsi_set_resid(sc, 0); 884 fallthrough; 885 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 886 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ 887 sc->result = (DID_OK << 16) | scsi_status; 888 if (scsi_state == 0) { 889 ; 890 } else if (scsi_state & 891 MPI_SCSI_STATE_AUTOSENSE_VALID) { 892 893 /* 894 * For potential trouble on LSI53C1030. 895 * (date:2007.xx.) 896 * It is checked whether the length of 897 * request data is equal to 898 * the length of transfer and residual. 899 * MEDIUM_ERROR is set by incorrect data. 900 */ 901 if ((ioc->bus_type == SPI) && 902 (sc->sense_buffer[2] & 0x20)) { 903 u32 difftransfer; 904 difftransfer = 905 sc->sense_buffer[3] << 24 | 906 sc->sense_buffer[4] << 16 | 907 sc->sense_buffer[5] << 8 | 908 sc->sense_buffer[6]; 909 if (((sc->sense_buffer[3] & 0x80) == 910 0x80) && (scsi_bufflen(sc) 911 != xfer_cnt)) { 912 sc->sense_buffer[2] = 913 MEDIUM_ERROR; 914 sc->sense_buffer[12] = 0xff; 915 sc->sense_buffer[13] = 0xff; 916 printk(KERN_WARNING"Errata" 917 "on LSI53C1030 occurred." 918 "sc->req_bufflen=0x%02x," 919 "xfer_cnt=0x%02x\n" , 920 scsi_bufflen(sc), 921 xfer_cnt); 922 } 923 if (((sc->sense_buffer[3] & 0x80) 924 != 0x80) && 925 (scsi_bufflen(sc) != 926 xfer_cnt + difftransfer)) { 927 sc->sense_buffer[2] = 928 MEDIUM_ERROR; 929 sc->sense_buffer[12] = 0xff; 930 sc->sense_buffer[13] = 0xff; 931 printk(KERN_WARNING 932 "Errata on LSI53C1030 occurred" 933 "sc->req_bufflen=0x%02x," 934 " xfer_cnt=0x%02x," 935 "difftransfer=0x%02x\n", 936 scsi_bufflen(sc), 937 xfer_cnt, 938 difftransfer); 939 } 940 } 941 942 /* 943 * If running against circa 200003dd 909 MPT f/w, 944 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL 945 * (QUEUE_FULL) returned from device! --> get 0x0000?128 946 * and with SenseBytes set to 0. 947 */ 948 if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL) 949 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); 950 951 } 952 else if (scsi_state & 953 (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS) 954 ) { 955 /* 956 * What to do? 957 */ 958 sc->result = DID_SOFT_ERROR << 16; 959 } 960 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { 961 /* Not real sure here either... */ 962 sc->result = DID_RESET << 16; 963 } 964 else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) { 965 /* Device Inq. data indicates that it supports 966 * QTags, but rejects QTag messages. 967 * This command completed OK. 968 * 969 * Not real sure here either so do nothing... */ 970 } 971 972 if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL) 973 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); 974 975 /* Add handling of: 976 * Reservation Conflict, Busy, 977 * Command Terminated, CHECK 978 */ 979 break; 980 981 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 982 sc->result = DID_SOFT_ERROR << 16; 983 break; 984 985 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 986 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 987 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 988 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 989 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 990 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 991 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 992 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 993 default: 994 /* 995 * What to do? 996 */ 997 sc->result = DID_SOFT_ERROR << 16; 998 break; 999 1000 } /* switch(status) */ 1001 1002 #ifdef CONFIG_FUSION_LOGGING 1003 if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY)) 1004 mptscsih_info_scsiio(ioc, sc, pScsiReply); 1005 #endif 1006 1007 } /* end of address reply case */ 1008 out: 1009 /* Unmap the DMA buffers, if any. */ 1010 scsi_dma_unmap(sc); 1011 1012 sc->scsi_done(sc); /* Issue the command callback */ 1013 1014 /* Free Chain buffers */ 1015 mptscsih_freeChainBuffers(ioc, req_idx); 1016 return 1; 1017 } 1018 1019 /* 1020 * mptscsih_flush_running_cmds - For each command found, search 1021 * Scsi_Host instance taskQ and reply to OS. 1022 * Called only if recovering from a FW reload. 1023 * @hd: Pointer to a SCSI HOST structure 1024 * 1025 * Returns: None. 1026 * 1027 * Must be called while new I/Os are being queued. 1028 */ 1029 void 1030 mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) 1031 { 1032 MPT_ADAPTER *ioc = hd->ioc; 1033 struct scsi_cmnd *sc; 1034 SCSIIORequest_t *mf = NULL; 1035 int ii; 1036 int channel, id; 1037 1038 for (ii= 0; ii < ioc->req_depth; ii++) { 1039 sc = mptscsih_getclear_scsi_lookup(ioc, ii); 1040 if (!sc) 1041 continue; 1042 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii); 1043 if (!mf) 1044 continue; 1045 channel = mf->Bus; 1046 id = mf->TargetID; 1047 mptscsih_freeChainBuffers(ioc, ii); 1048 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf); 1049 if ((unsigned char *)mf != sc->host_scribble) 1050 continue; 1051 scsi_dma_unmap(sc); 1052 sc->result = DID_RESET << 16; 1053 sc->host_scribble = NULL; 1054 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT 1055 "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, " 1056 "idx=%x\n", ioc->name, channel, id, sc, mf, ii)); 1057 sc->scsi_done(sc); 1058 } 1059 } 1060 EXPORT_SYMBOL(mptscsih_flush_running_cmds); 1061 1062 /* 1063 * mptscsih_search_running_cmds - Delete any commands associated 1064 * with the specified target and lun. Function called only 1065 * when a lun is disable by mid-layer. 1066 * Do NOT access the referenced scsi_cmnd structure or 1067 * members. Will cause either a paging or NULL ptr error. 1068 * (BUT, BUT, BUT, the code does reference it! - mdr) 1069 * @hd: Pointer to a SCSI HOST structure 1070 * @vdevice: per device private data 1071 * 1072 * Returns: None. 1073 * 1074 * Called from slave_destroy. 1075 */ 1076 static void 1077 mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice) 1078 { 1079 SCSIIORequest_t *mf = NULL; 1080 int ii; 1081 struct scsi_cmnd *sc; 1082 struct scsi_lun lun; 1083 MPT_ADAPTER *ioc = hd->ioc; 1084 unsigned long flags; 1085 1086 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 1087 for (ii = 0; ii < ioc->req_depth; ii++) { 1088 if ((sc = ioc->ScsiLookup[ii]) != NULL) { 1089 1090 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii); 1091 if (mf == NULL) 1092 continue; 1093 /* If the device is a hidden raid component, then its 1094 * expected that the mf->function will be RAID_SCSI_IO 1095 */ 1096 if (vdevice->vtarget->tflags & 1097 MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function != 1098 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) 1099 continue; 1100 1101 int_to_scsilun(vdevice->lun, &lun); 1102 if ((mf->Bus != vdevice->vtarget->channel) || 1103 (mf->TargetID != vdevice->vtarget->id) || 1104 memcmp(lun.scsi_lun, mf->LUN, 8)) 1105 continue; 1106 1107 if ((unsigned char *)mf != sc->host_scribble) 1108 continue; 1109 ioc->ScsiLookup[ii] = NULL; 1110 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 1111 mptscsih_freeChainBuffers(ioc, ii); 1112 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf); 1113 scsi_dma_unmap(sc); 1114 sc->host_scribble = NULL; 1115 sc->result = DID_NO_CONNECT << 16; 1116 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, 1117 MYIOC_s_FMT "completing cmds: fw_channel %d, " 1118 "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, 1119 vdevice->vtarget->channel, vdevice->vtarget->id, 1120 sc, mf, ii)); 1121 sc->scsi_done(sc); 1122 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 1123 } 1124 } 1125 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 1126 return; 1127 } 1128 1129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1130 1131 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1132 /* 1133 * mptscsih_report_queue_full - Report QUEUE_FULL status returned 1134 * from a SCSI target device. 1135 * @sc: Pointer to scsi_cmnd structure 1136 * @pScsiReply: Pointer to SCSIIOReply_t 1137 * @pScsiReq: Pointer to original SCSI request 1138 * 1139 * This routine periodically reports QUEUE_FULL status returned from a 1140 * SCSI target device. It reports this to the console via kernel 1141 * printk() API call, not more than once every 10 seconds. 1142 */ 1143 static void 1144 mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq) 1145 { 1146 long time = jiffies; 1147 MPT_SCSI_HOST *hd; 1148 MPT_ADAPTER *ioc; 1149 1150 if (sc->device == NULL) 1151 return; 1152 if (sc->device->host == NULL) 1153 return; 1154 if ((hd = shost_priv(sc->device->host)) == NULL) 1155 return; 1156 ioc = hd->ioc; 1157 if (time - hd->last_queue_full > 10 * HZ) { 1158 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n", 1159 ioc->name, 0, sc->device->id, sc->device->lun)); 1160 hd->last_queue_full = time; 1161 } 1162 } 1163 1164 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1165 /* 1166 * mptscsih_remove - Removed scsi devices 1167 * @pdev: Pointer to pci_dev structure 1168 * 1169 * 1170 */ 1171 void 1172 mptscsih_remove(struct pci_dev *pdev) 1173 { 1174 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1175 struct Scsi_Host *host = ioc->sh; 1176 MPT_SCSI_HOST *hd; 1177 int sz1; 1178 1179 if((hd = shost_priv(host)) == NULL) 1180 return; 1181 1182 mptscsih_shutdown(pdev); 1183 1184 sz1=0; 1185 1186 if (ioc->ScsiLookup != NULL) { 1187 sz1 = ioc->req_depth * sizeof(void *); 1188 kfree(ioc->ScsiLookup); 1189 ioc->ScsiLookup = NULL; 1190 } 1191 1192 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1193 "Free'd ScsiLookup (%d) memory\n", 1194 ioc->name, sz1)); 1195 1196 kfree(hd->info_kbuf); 1197 1198 /* NULL the Scsi_Host pointer 1199 */ 1200 ioc->sh = NULL; 1201 1202 scsi_host_put(host); 1203 1204 mpt_detach(pdev); 1205 1206 } 1207 1208 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1209 /* 1210 * mptscsih_shutdown - reboot notifier 1211 * 1212 */ 1213 void 1214 mptscsih_shutdown(struct pci_dev *pdev) 1215 { 1216 } 1217 1218 #ifdef CONFIG_PM 1219 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1220 /* 1221 * mptscsih_suspend - Fusion MPT scsi driver suspend routine. 1222 * 1223 * 1224 */ 1225 int 1226 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) 1227 { 1228 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1229 1230 scsi_block_requests(ioc->sh); 1231 flush_scheduled_work(); 1232 mptscsih_shutdown(pdev); 1233 return mpt_suspend(pdev,state); 1234 } 1235 1236 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1237 /* 1238 * mptscsih_resume - Fusion MPT scsi driver resume routine. 1239 * 1240 * 1241 */ 1242 int 1243 mptscsih_resume(struct pci_dev *pdev) 1244 { 1245 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1246 int rc; 1247 1248 rc = mpt_resume(pdev); 1249 scsi_unblock_requests(ioc->sh); 1250 return rc; 1251 } 1252 1253 #endif 1254 1255 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1256 /** 1257 * mptscsih_info - Return information about MPT adapter 1258 * @SChost: Pointer to Scsi_Host structure 1259 * 1260 * (linux scsi_host_template.info routine) 1261 * 1262 * Returns pointer to buffer where information was written. 1263 */ 1264 const char * 1265 mptscsih_info(struct Scsi_Host *SChost) 1266 { 1267 MPT_SCSI_HOST *h; 1268 int size = 0; 1269 1270 h = shost_priv(SChost); 1271 1272 if (h->info_kbuf == NULL) 1273 if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL) 1274 return h->info_kbuf; 1275 h->info_kbuf[0] = '\0'; 1276 1277 mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0); 1278 h->info_kbuf[size-1] = '\0'; 1279 1280 return h->info_kbuf; 1281 } 1282 1283 int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host) 1284 { 1285 MPT_SCSI_HOST *hd = shost_priv(host); 1286 MPT_ADAPTER *ioc = hd->ioc; 1287 1288 seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name); 1289 seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); 1290 seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts); 1291 seq_printf(m, "MaxQ=%d\n", ioc->req_depth); 1292 1293 return 0; 1294 } 1295 1296 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1297 #define ADD_INDEX_LOG(req_ent) do { } while(0) 1298 1299 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1300 /** 1301 * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine. 1302 * @SCpnt: Pointer to scsi_cmnd structure 1303 * 1304 * (linux scsi_host_template.queuecommand routine) 1305 * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest 1306 * from a linux scsi_cmnd request and send it to the IOC. 1307 * 1308 * Returns 0. (rtn value discarded by linux scsi mid-layer) 1309 */ 1310 int 1311 mptscsih_qcmd(struct scsi_cmnd *SCpnt) 1312 { 1313 MPT_SCSI_HOST *hd; 1314 MPT_FRAME_HDR *mf; 1315 SCSIIORequest_t *pScsiReq; 1316 VirtDevice *vdevice = SCpnt->device->hostdata; 1317 u32 datalen; 1318 u32 scsictl; 1319 u32 scsidir; 1320 u32 cmd_len; 1321 int my_idx; 1322 int ii; 1323 MPT_ADAPTER *ioc; 1324 1325 hd = shost_priv(SCpnt->device->host); 1326 ioc = hd->ioc; 1327 1328 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n", 1329 ioc->name, SCpnt)); 1330 1331 if (ioc->taskmgmt_quiesce_io) 1332 return SCSI_MLQUEUE_HOST_BUSY; 1333 1334 /* 1335 * Put together a MPT SCSI request... 1336 */ 1337 if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { 1338 dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n", 1339 ioc->name)); 1340 return SCSI_MLQUEUE_HOST_BUSY; 1341 } 1342 1343 pScsiReq = (SCSIIORequest_t *) mf; 1344 1345 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 1346 1347 ADD_INDEX_LOG(my_idx); 1348 1349 /* TUR's being issued with scsictl=0x02000000 (DATA_IN)! 1350 * Seems we may receive a buffer (datalen>0) even when there 1351 * will be no data transfer! GRRRRR... 1352 */ 1353 if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) { 1354 datalen = scsi_bufflen(SCpnt); 1355 scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */ 1356 } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) { 1357 datalen = scsi_bufflen(SCpnt); 1358 scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */ 1359 } else { 1360 datalen = 0; 1361 scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER; 1362 } 1363 1364 /* Default to untagged. Once a target structure has been allocated, 1365 * use the Inquiry data to determine if device supports tagged. 1366 */ 1367 if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) && 1368 SCpnt->device->tagged_supported) 1369 scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; 1370 else 1371 scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED; 1372 1373 1374 /* Use the above information to set up the message frame 1375 */ 1376 pScsiReq->TargetID = (u8) vdevice->vtarget->id; 1377 pScsiReq->Bus = vdevice->vtarget->channel; 1378 pScsiReq->ChainOffset = 0; 1379 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 1380 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; 1381 else 1382 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; 1383 pScsiReq->CDBLength = SCpnt->cmd_len; 1384 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 1385 pScsiReq->Reserved = 0; 1386 pScsiReq->MsgFlags = mpt_msg_flags(ioc); 1387 int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN); 1388 pScsiReq->Control = cpu_to_le32(scsictl); 1389 1390 /* 1391 * Write SCSI CDB into the message 1392 */ 1393 cmd_len = SCpnt->cmd_len; 1394 for (ii=0; ii < cmd_len; ii++) 1395 pScsiReq->CDB[ii] = SCpnt->cmnd[ii]; 1396 1397 for (ii=cmd_len; ii < 16; ii++) 1398 pScsiReq->CDB[ii] = 0; 1399 1400 /* DataLength */ 1401 pScsiReq->DataLength = cpu_to_le32(datalen); 1402 1403 /* SenseBuffer low address */ 1404 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma 1405 + (my_idx * MPT_SENSE_BUFFER_ALLOC)); 1406 1407 /* Now add the SG list 1408 * Always have a SGE even if null length. 1409 */ 1410 if (datalen == 0) { 1411 /* Add a NULL SGE */ 1412 ioc->add_sge((char *)&pScsiReq->SGL, 1413 MPT_SGE_FLAGS_SSIMPLE_READ | 0, 1414 (dma_addr_t) -1); 1415 } else { 1416 /* Add a 32 or 64 bit SGE */ 1417 if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS) 1418 goto fail; 1419 } 1420 1421 SCpnt->host_scribble = (unsigned char *)mf; 1422 mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt); 1423 1424 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); 1425 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n", 1426 ioc->name, SCpnt, mf, my_idx)); 1427 DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf); 1428 return 0; 1429 1430 fail: 1431 mptscsih_freeChainBuffers(ioc, my_idx); 1432 mpt_free_msg_frame(ioc, mf); 1433 return SCSI_MLQUEUE_HOST_BUSY; 1434 } 1435 1436 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1437 /* 1438 * mptscsih_freeChainBuffers - Function to free chain buffers associated 1439 * with a SCSI IO request 1440 * @hd: Pointer to the MPT_SCSI_HOST instance 1441 * @req_idx: Index of the SCSI IO request frame. 1442 * 1443 * Called if SG chain buffer allocation fails and mptscsih callbacks. 1444 * No return. 1445 */ 1446 static void 1447 mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) 1448 { 1449 MPT_FRAME_HDR *chain; 1450 unsigned long flags; 1451 int chain_idx; 1452 int next; 1453 1454 /* Get the first chain index and reset 1455 * tracker state. 1456 */ 1457 chain_idx = ioc->ReqToChain[req_idx]; 1458 ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN; 1459 1460 while (chain_idx != MPT_HOST_NO_CHAIN) { 1461 1462 /* Save the next chain buffer index */ 1463 next = ioc->ChainToChain[chain_idx]; 1464 1465 /* Free this chain buffer and reset 1466 * tracker 1467 */ 1468 ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN; 1469 1470 chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer 1471 + (chain_idx * ioc->req_sz)); 1472 1473 spin_lock_irqsave(&ioc->FreeQlock, flags); 1474 list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ); 1475 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1476 1477 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n", 1478 ioc->name, chain_idx)); 1479 1480 /* handle next */ 1481 chain_idx = next; 1482 } 1483 return; 1484 } 1485 1486 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1487 /* 1488 * Reset Handling 1489 */ 1490 1491 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1492 /** 1493 * mptscsih_IssueTaskMgmt - Generic send Task Management function. 1494 * @hd: Pointer to MPT_SCSI_HOST structure 1495 * @type: Task Management type 1496 * @channel: channel number for task management 1497 * @id: Logical Target ID for reset (if appropriate) 1498 * @lun: Logical Unit for reset (if appropriate) 1499 * @ctx2abort: Context for the task to be aborted (if appropriate) 1500 * @timeout: timeout for task management control 1501 * 1502 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 1503 * or a non-interrupt thread. In the former, must not call schedule(). 1504 * 1505 * Not all fields are meaningfull for all task types. 1506 * 1507 * Returns 0 for SUCCESS, or FAILED. 1508 * 1509 **/ 1510 int 1511 mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun, 1512 int ctx2abort, ulong timeout) 1513 { 1514 MPT_FRAME_HDR *mf; 1515 SCSITaskMgmt_t *pScsiTm; 1516 int ii; 1517 int retval; 1518 MPT_ADAPTER *ioc = hd->ioc; 1519 unsigned long timeleft; 1520 u8 issue_hard_reset; 1521 u32 ioc_raw_state; 1522 unsigned long time_count; 1523 1524 issue_hard_reset = 0; 1525 ioc_raw_state = mpt_GetIocState(ioc, 0); 1526 1527 if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) { 1528 printk(MYIOC_s_WARN_FMT 1529 "TaskMgmt type=%x: IOC Not operational (0x%x)!\n", 1530 ioc->name, type, ioc_raw_state); 1531 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 1532 ioc->name, __func__); 1533 if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) 1534 printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset " 1535 "FAILED!!\n", ioc->name); 1536 return 0; 1537 } 1538 1539 /* DOORBELL ACTIVE check is not required if 1540 * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported. 1541 */ 1542 1543 if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) 1544 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) && 1545 (ioc_raw_state & MPI_DOORBELL_ACTIVE)) { 1546 printk(MYIOC_s_WARN_FMT 1547 "TaskMgmt type=%x: ioc_state: " 1548 "DOORBELL_ACTIVE (0x%x)!\n", 1549 ioc->name, type, ioc_raw_state); 1550 return FAILED; 1551 } 1552 1553 mutex_lock(&ioc->taskmgmt_cmds.mutex); 1554 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 1555 mf = NULL; 1556 retval = FAILED; 1557 goto out; 1558 } 1559 1560 /* Return Fail to calling function if no message frames available. 1561 */ 1562 if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) { 1563 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1564 "TaskMgmt no msg frames!!\n", ioc->name)); 1565 retval = FAILED; 1566 mpt_clear_taskmgmt_in_progress_flag(ioc); 1567 goto out; 1568 } 1569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", 1570 ioc->name, mf)); 1571 1572 /* Format the Request 1573 */ 1574 pScsiTm = (SCSITaskMgmt_t *) mf; 1575 pScsiTm->TargetID = id; 1576 pScsiTm->Bus = channel; 1577 pScsiTm->ChainOffset = 0; 1578 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 1579 1580 pScsiTm->Reserved = 0; 1581 pScsiTm->TaskType = type; 1582 pScsiTm->Reserved1 = 0; 1583 pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) 1584 ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0; 1585 1586 int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN); 1587 1588 for (ii=0; ii < 7; ii++) 1589 pScsiTm->Reserved2[ii] = 0; 1590 1591 pScsiTm->TaskMsgContext = ctx2abort; 1592 1593 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) " 1594 "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort, 1595 type, timeout)); 1596 1597 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm); 1598 1599 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) 1600 time_count = jiffies; 1601 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && 1602 (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) 1603 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf); 1604 else { 1605 retval = mpt_send_handshake_request(ioc->TaskCtx, ioc, 1606 sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP); 1607 if (retval) { 1608 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1609 "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n", 1610 ioc->name, mf, retval)); 1611 mpt_free_msg_frame(ioc, mf); 1612 mpt_clear_taskmgmt_in_progress_flag(ioc); 1613 goto out; 1614 } 1615 } 1616 1617 timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, 1618 timeout*HZ); 1619 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 1620 retval = FAILED; 1621 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT 1622 "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf)); 1623 mpt_clear_taskmgmt_in_progress_flag(ioc); 1624 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 1625 goto out; 1626 issue_hard_reset = 1; 1627 goto out; 1628 } 1629 1630 retval = mptscsih_taskmgmt_reply(ioc, type, 1631 (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply); 1632 1633 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1634 "TaskMgmt completed (%d seconds)\n", 1635 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000)); 1636 1637 out: 1638 1639 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) 1640 if (issue_hard_reset) { 1641 printk(MYIOC_s_WARN_FMT 1642 "Issuing Reset from %s!! doorbell=0x%08x\n", 1643 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 1644 retval = (ioc->bus_type == SAS) ? 1645 mpt_HardResetHandler(ioc, CAN_SLEEP) : 1646 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 1647 mpt_free_msg_frame(ioc, mf); 1648 } 1649 1650 retval = (retval == 0) ? 0 : FAILED; 1651 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 1652 return retval; 1653 } 1654 EXPORT_SYMBOL(mptscsih_IssueTaskMgmt); 1655 1656 static int 1657 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) 1658 { 1659 switch (ioc->bus_type) { 1660 case FC: 1661 return 40; 1662 case SAS: 1663 return 30; 1664 case SPI: 1665 default: 1666 return 10; 1667 } 1668 } 1669 1670 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1671 /** 1672 * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant 1673 * @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted 1674 * 1675 * (linux scsi_host_template.eh_abort_handler routine) 1676 * 1677 * Returns SUCCESS or FAILED. 1678 **/ 1679 int 1680 mptscsih_abort(struct scsi_cmnd * SCpnt) 1681 { 1682 MPT_SCSI_HOST *hd; 1683 MPT_FRAME_HDR *mf; 1684 u32 ctx2abort; 1685 int scpnt_idx; 1686 int retval; 1687 VirtDevice *vdevice; 1688 MPT_ADAPTER *ioc; 1689 1690 /* If we can't locate our host adapter structure, return FAILED status. 1691 */ 1692 if ((hd = shost_priv(SCpnt->device->host)) == NULL) { 1693 SCpnt->result = DID_RESET << 16; 1694 SCpnt->scsi_done(SCpnt); 1695 printk(KERN_ERR MYNAM ": task abort: " 1696 "can't locate host! (sc=%p)\n", SCpnt); 1697 return FAILED; 1698 } 1699 1700 ioc = hd->ioc; 1701 printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n", 1702 ioc->name, SCpnt); 1703 scsi_print_command(SCpnt); 1704 1705 vdevice = SCpnt->device->hostdata; 1706 if (!vdevice || !vdevice->vtarget) { 1707 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1708 "task abort: device has been deleted (sc=%p)\n", 1709 ioc->name, SCpnt)); 1710 SCpnt->result = DID_NO_CONNECT << 16; 1711 SCpnt->scsi_done(SCpnt); 1712 retval = SUCCESS; 1713 goto out; 1714 } 1715 1716 /* Task aborts are not supported for hidden raid components. 1717 */ 1718 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { 1719 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1720 "task abort: hidden raid component (sc=%p)\n", 1721 ioc->name, SCpnt)); 1722 SCpnt->result = DID_RESET << 16; 1723 retval = FAILED; 1724 goto out; 1725 } 1726 1727 /* Task aborts are not supported for volumes. 1728 */ 1729 if (vdevice->vtarget->raidVolume) { 1730 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1731 "task abort: raid volume (sc=%p)\n", 1732 ioc->name, SCpnt)); 1733 SCpnt->result = DID_RESET << 16; 1734 retval = FAILED; 1735 goto out; 1736 } 1737 1738 /* Find this command 1739 */ 1740 if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) { 1741 /* Cmd not found in ScsiLookup. 1742 * Do OS callback. 1743 */ 1744 SCpnt->result = DID_RESET << 16; 1745 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: " 1746 "Command not in the active list! (sc=%p)\n", ioc->name, 1747 SCpnt)); 1748 retval = SUCCESS; 1749 goto out; 1750 } 1751 1752 if (ioc->timeouts < -1) 1753 ioc->timeouts++; 1754 1755 if (mpt_fwfault_debug) 1756 mpt_halt_firmware(ioc); 1757 1758 /* Most important! Set TaskMsgContext to SCpnt's MsgContext! 1759 * (the IO to be ABORT'd) 1760 * 1761 * NOTE: Since we do not byteswap MsgContext, we do not 1762 * swap it here either. It is an opaque cookie to 1763 * the controller, so it does not matter. -DaveM 1764 */ 1765 mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx); 1766 ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext; 1767 retval = mptscsih_IssueTaskMgmt(hd, 1768 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, 1769 vdevice->vtarget->channel, 1770 vdevice->vtarget->id, vdevice->lun, 1771 ctx2abort, mptscsih_get_tm_timeout(ioc)); 1772 1773 if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) { 1774 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1775 "task abort: command still in active list! (sc=%p)\n", 1776 ioc->name, SCpnt)); 1777 retval = FAILED; 1778 } else { 1779 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1780 "task abort: command cleared from active list! (sc=%p)\n", 1781 ioc->name, SCpnt)); 1782 retval = SUCCESS; 1783 } 1784 1785 out: 1786 printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n", 1787 ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval, 1788 SCpnt); 1789 1790 return retval; 1791 } 1792 1793 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1794 /** 1795 * mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant 1796 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to 1797 * 1798 * (linux scsi_host_template.eh_dev_reset_handler routine) 1799 * 1800 * Returns SUCCESS or FAILED. 1801 **/ 1802 int 1803 mptscsih_dev_reset(struct scsi_cmnd * SCpnt) 1804 { 1805 MPT_SCSI_HOST *hd; 1806 int retval; 1807 VirtDevice *vdevice; 1808 MPT_ADAPTER *ioc; 1809 1810 /* If we can't locate our host adapter structure, return FAILED status. 1811 */ 1812 if ((hd = shost_priv(SCpnt->device->host)) == NULL){ 1813 printk(KERN_ERR MYNAM ": target reset: " 1814 "Can't locate host! (sc=%p)\n", SCpnt); 1815 return FAILED; 1816 } 1817 1818 ioc = hd->ioc; 1819 printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n", 1820 ioc->name, SCpnt); 1821 scsi_print_command(SCpnt); 1822 1823 vdevice = SCpnt->device->hostdata; 1824 if (!vdevice || !vdevice->vtarget) { 1825 retval = 0; 1826 goto out; 1827 } 1828 1829 /* Target reset to hidden raid component is not supported 1830 */ 1831 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { 1832 retval = FAILED; 1833 goto out; 1834 } 1835 1836 retval = mptscsih_IssueTaskMgmt(hd, 1837 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 1838 vdevice->vtarget->channel, 1839 vdevice->vtarget->id, 0, 0, 1840 mptscsih_get_tm_timeout(ioc)); 1841 1842 out: 1843 printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n", 1844 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); 1845 1846 if (retval == 0) 1847 return SUCCESS; 1848 else 1849 return FAILED; 1850 } 1851 1852 1853 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1854 /** 1855 * mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant 1856 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to 1857 * 1858 * (linux scsi_host_template.eh_bus_reset_handler routine) 1859 * 1860 * Returns SUCCESS or FAILED. 1861 **/ 1862 int 1863 mptscsih_bus_reset(struct scsi_cmnd * SCpnt) 1864 { 1865 MPT_SCSI_HOST *hd; 1866 int retval; 1867 VirtDevice *vdevice; 1868 MPT_ADAPTER *ioc; 1869 1870 /* If we can't locate our host adapter structure, return FAILED status. 1871 */ 1872 if ((hd = shost_priv(SCpnt->device->host)) == NULL){ 1873 printk(KERN_ERR MYNAM ": bus reset: " 1874 "Can't locate host! (sc=%p)\n", SCpnt); 1875 return FAILED; 1876 } 1877 1878 ioc = hd->ioc; 1879 printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n", 1880 ioc->name, SCpnt); 1881 scsi_print_command(SCpnt); 1882 1883 if (ioc->timeouts < -1) 1884 ioc->timeouts++; 1885 1886 vdevice = SCpnt->device->hostdata; 1887 if (!vdevice || !vdevice->vtarget) 1888 return SUCCESS; 1889 retval = mptscsih_IssueTaskMgmt(hd, 1890 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 1891 vdevice->vtarget->channel, 0, 0, 0, 1892 mptscsih_get_tm_timeout(ioc)); 1893 1894 printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n", 1895 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); 1896 1897 if (retval == 0) 1898 return SUCCESS; 1899 else 1900 return FAILED; 1901 } 1902 1903 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1904 /** 1905 * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant) 1906 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to 1907 * 1908 * (linux scsi_host_template.eh_host_reset_handler routine) 1909 * 1910 * Returns SUCCESS or FAILED. 1911 */ 1912 int 1913 mptscsih_host_reset(struct scsi_cmnd *SCpnt) 1914 { 1915 MPT_SCSI_HOST * hd; 1916 int status = SUCCESS; 1917 MPT_ADAPTER *ioc; 1918 int retval; 1919 1920 /* If we can't locate the host to reset, then we failed. */ 1921 if ((hd = shost_priv(SCpnt->device->host)) == NULL){ 1922 printk(KERN_ERR MYNAM ": host reset: " 1923 "Can't locate host! (sc=%p)\n", SCpnt); 1924 return FAILED; 1925 } 1926 1927 /* make sure we have no outstanding commands at this stage */ 1928 mptscsih_flush_running_cmds(hd); 1929 1930 ioc = hd->ioc; 1931 printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", 1932 ioc->name, SCpnt); 1933 1934 /* If our attempts to reset the host failed, then return a failed 1935 * status. The host will be taken off line by the SCSI mid-layer. 1936 */ 1937 retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 1938 if (retval < 0) 1939 status = FAILED; 1940 else 1941 status = SUCCESS; 1942 1943 printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n", 1944 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); 1945 1946 return status; 1947 } 1948 1949 static int 1950 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type, 1951 SCSITaskMgmtReply_t *pScsiTmReply) 1952 { 1953 u16 iocstatus; 1954 u32 termination_count; 1955 int retval; 1956 1957 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 1958 retval = FAILED; 1959 goto out; 1960 } 1961 1962 DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply); 1963 1964 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK; 1965 termination_count = le32_to_cpu(pScsiTmReply->TerminationCount); 1966 1967 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1968 "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n" 1969 "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n" 1970 "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus, 1971 pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus), 1972 le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode, 1973 termination_count)); 1974 1975 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 && 1976 pScsiTmReply->ResponseCode) 1977 mptscsih_taskmgmt_response_code(ioc, 1978 pScsiTmReply->ResponseCode); 1979 1980 if (iocstatus == MPI_IOCSTATUS_SUCCESS) { 1981 retval = 0; 1982 goto out; 1983 } 1984 1985 retval = FAILED; 1986 if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { 1987 if (termination_count == 1) 1988 retval = 0; 1989 goto out; 1990 } 1991 1992 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED || 1993 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED) 1994 retval = 0; 1995 1996 out: 1997 return retval; 1998 } 1999 2000 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2001 void 2002 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code) 2003 { 2004 char *desc; 2005 2006 switch (response_code) { 2007 case MPI_SCSITASKMGMT_RSP_TM_COMPLETE: 2008 desc = "The task completed."; 2009 break; 2010 case MPI_SCSITASKMGMT_RSP_INVALID_FRAME: 2011 desc = "The IOC received an invalid frame status."; 2012 break; 2013 case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: 2014 desc = "The task type is not supported."; 2015 break; 2016 case MPI_SCSITASKMGMT_RSP_TM_FAILED: 2017 desc = "The requested task failed."; 2018 break; 2019 case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED: 2020 desc = "The task completed successfully."; 2021 break; 2022 case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN: 2023 desc = "The LUN request is invalid."; 2024 break; 2025 case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: 2026 desc = "The task is in the IOC queue and has not been sent to target."; 2027 break; 2028 default: 2029 desc = "unknown"; 2030 break; 2031 } 2032 printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n", 2033 ioc->name, response_code, desc); 2034 } 2035 EXPORT_SYMBOL(mptscsih_taskmgmt_response_code); 2036 2037 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2038 /** 2039 * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver 2040 * @ioc: Pointer to MPT_ADAPTER structure 2041 * @mf: Pointer to SCSI task mgmt request frame 2042 * @mr: Pointer to SCSI task mgmt reply frame 2043 * 2044 * This routine is called from mptbase.c::mpt_interrupt() at the completion 2045 * of any SCSI task management request. 2046 * This routine is registered with the MPT (base) driver at driver 2047 * load/init time via the mpt_register() API call. 2048 * 2049 * Returns 1 indicating alloc'd request frame ptr should be freed. 2050 **/ 2051 int 2052 mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, 2053 MPT_FRAME_HDR *mr) 2054 { 2055 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2056 "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr)); 2057 2058 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 2059 2060 if (!mr) 2061 goto out; 2062 2063 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 2064 memcpy(ioc->taskmgmt_cmds.reply, mr, 2065 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); 2066 out: 2067 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 2068 mpt_clear_taskmgmt_in_progress_flag(ioc); 2069 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 2070 complete(&ioc->taskmgmt_cmds.done); 2071 if (ioc->bus_type == SAS) 2072 ioc->schedule_target_reset(ioc); 2073 return 1; 2074 } 2075 return 0; 2076 } 2077 2078 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2079 /* 2080 * This is anyones guess quite frankly. 2081 */ 2082 int 2083 mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, 2084 sector_t capacity, int geom[]) 2085 { 2086 int heads; 2087 int sectors; 2088 sector_t cylinders; 2089 ulong dummy; 2090 2091 heads = 64; 2092 sectors = 32; 2093 2094 dummy = heads * sectors; 2095 cylinders = capacity; 2096 sector_div(cylinders,dummy); 2097 2098 /* 2099 * Handle extended translation size for logical drives 2100 * > 1Gb 2101 */ 2102 if ((ulong)capacity >= 0x200000) { 2103 heads = 255; 2104 sectors = 63; 2105 dummy = heads * sectors; 2106 cylinders = capacity; 2107 sector_div(cylinders,dummy); 2108 } 2109 2110 /* return result */ 2111 geom[0] = heads; 2112 geom[1] = sectors; 2113 geom[2] = cylinders; 2114 2115 return 0; 2116 } 2117 2118 /* Search IOC page 3 to determine if this is hidden physical disk 2119 * 2120 */ 2121 int 2122 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id) 2123 { 2124 struct inactive_raid_component_info *component_info; 2125 int i, j; 2126 RaidPhysDiskPage1_t *phys_disk; 2127 int rc = 0; 2128 int num_paths; 2129 2130 if (!ioc->raid_data.pIocPg3) 2131 goto out; 2132 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2133 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) && 2134 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) { 2135 rc = 1; 2136 goto out; 2137 } 2138 } 2139 2140 if (ioc->bus_type != SAS) 2141 goto out; 2142 2143 /* 2144 * Check if dual path 2145 */ 2146 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2147 num_paths = mpt_raid_phys_disk_get_num_paths(ioc, 2148 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum); 2149 if (num_paths < 2) 2150 continue; 2151 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + 2152 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); 2153 if (!phys_disk) 2154 continue; 2155 if ((mpt_raid_phys_disk_pg1(ioc, 2156 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum, 2157 phys_disk))) { 2158 kfree(phys_disk); 2159 continue; 2160 } 2161 for (j = 0; j < num_paths; j++) { 2162 if ((phys_disk->Path[j].Flags & 2163 MPI_RAID_PHYSDISK1_FLAG_INVALID)) 2164 continue; 2165 if ((phys_disk->Path[j].Flags & 2166 MPI_RAID_PHYSDISK1_FLAG_BROKEN)) 2167 continue; 2168 if ((id == phys_disk->Path[j].PhysDiskID) && 2169 (channel == phys_disk->Path[j].PhysDiskBus)) { 2170 rc = 1; 2171 kfree(phys_disk); 2172 goto out; 2173 } 2174 } 2175 kfree(phys_disk); 2176 } 2177 2178 2179 /* 2180 * Check inactive list for matching phys disks 2181 */ 2182 if (list_empty(&ioc->raid_data.inactive_list)) 2183 goto out; 2184 2185 mutex_lock(&ioc->raid_data.inactive_list_mutex); 2186 list_for_each_entry(component_info, &ioc->raid_data.inactive_list, 2187 list) { 2188 if ((component_info->d.PhysDiskID == id) && 2189 (component_info->d.PhysDiskBus == channel)) 2190 rc = 1; 2191 } 2192 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 2193 2194 out: 2195 return rc; 2196 } 2197 EXPORT_SYMBOL(mptscsih_is_phys_disk); 2198 2199 u8 2200 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id) 2201 { 2202 struct inactive_raid_component_info *component_info; 2203 int i, j; 2204 RaidPhysDiskPage1_t *phys_disk; 2205 int rc = -ENXIO; 2206 int num_paths; 2207 2208 if (!ioc->raid_data.pIocPg3) 2209 goto out; 2210 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2211 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) && 2212 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) { 2213 rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum; 2214 goto out; 2215 } 2216 } 2217 2218 if (ioc->bus_type != SAS) 2219 goto out; 2220 2221 /* 2222 * Check if dual path 2223 */ 2224 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2225 num_paths = mpt_raid_phys_disk_get_num_paths(ioc, 2226 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum); 2227 if (num_paths < 2) 2228 continue; 2229 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + 2230 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); 2231 if (!phys_disk) 2232 continue; 2233 if ((mpt_raid_phys_disk_pg1(ioc, 2234 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum, 2235 phys_disk))) { 2236 kfree(phys_disk); 2237 continue; 2238 } 2239 for (j = 0; j < num_paths; j++) { 2240 if ((phys_disk->Path[j].Flags & 2241 MPI_RAID_PHYSDISK1_FLAG_INVALID)) 2242 continue; 2243 if ((phys_disk->Path[j].Flags & 2244 MPI_RAID_PHYSDISK1_FLAG_BROKEN)) 2245 continue; 2246 if ((id == phys_disk->Path[j].PhysDiskID) && 2247 (channel == phys_disk->Path[j].PhysDiskBus)) { 2248 rc = phys_disk->PhysDiskNum; 2249 kfree(phys_disk); 2250 goto out; 2251 } 2252 } 2253 kfree(phys_disk); 2254 } 2255 2256 /* 2257 * Check inactive list for matching phys disks 2258 */ 2259 if (list_empty(&ioc->raid_data.inactive_list)) 2260 goto out; 2261 2262 mutex_lock(&ioc->raid_data.inactive_list_mutex); 2263 list_for_each_entry(component_info, &ioc->raid_data.inactive_list, 2264 list) { 2265 if ((component_info->d.PhysDiskID == id) && 2266 (component_info->d.PhysDiskBus == channel)) 2267 rc = component_info->d.PhysDiskNum; 2268 } 2269 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 2270 2271 out: 2272 return rc; 2273 } 2274 EXPORT_SYMBOL(mptscsih_raid_id_to_num); 2275 2276 /* 2277 * OS entry point to allow for host driver to free allocated memory 2278 * Called if no device present or device being unloaded 2279 */ 2280 void 2281 mptscsih_slave_destroy(struct scsi_device *sdev) 2282 { 2283 struct Scsi_Host *host = sdev->host; 2284 MPT_SCSI_HOST *hd = shost_priv(host); 2285 VirtTarget *vtarget; 2286 VirtDevice *vdevice; 2287 struct scsi_target *starget; 2288 2289 starget = scsi_target(sdev); 2290 vtarget = starget->hostdata; 2291 vdevice = sdev->hostdata; 2292 if (!vdevice) 2293 return; 2294 2295 mptscsih_search_running_cmds(hd, vdevice); 2296 vtarget->num_luns--; 2297 mptscsih_synchronize_cache(hd, vdevice); 2298 kfree(vdevice); 2299 sdev->hostdata = NULL; 2300 } 2301 2302 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2303 /* 2304 * mptscsih_change_queue_depth - This function will set a devices queue depth 2305 * @sdev: per scsi_device pointer 2306 * @qdepth: requested queue depth 2307 * 2308 * Adding support for new 'change_queue_depth' api. 2309 */ 2310 int 2311 mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) 2312 { 2313 MPT_SCSI_HOST *hd = shost_priv(sdev->host); 2314 VirtTarget *vtarget; 2315 struct scsi_target *starget; 2316 int max_depth; 2317 MPT_ADAPTER *ioc = hd->ioc; 2318 2319 starget = scsi_target(sdev); 2320 vtarget = starget->hostdata; 2321 2322 if (ioc->bus_type == SPI) { 2323 if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) 2324 max_depth = 1; 2325 else if (sdev->type == TYPE_DISK && 2326 vtarget->minSyncFactor <= MPT_ULTRA160) 2327 max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; 2328 else 2329 max_depth = MPT_SCSI_CMD_PER_DEV_LOW; 2330 } else 2331 max_depth = ioc->sh->can_queue; 2332 2333 if (!sdev->tagged_supported) 2334 max_depth = 1; 2335 2336 if (qdepth > max_depth) 2337 qdepth = max_depth; 2338 2339 return scsi_change_queue_depth(sdev, qdepth); 2340 } 2341 2342 /* 2343 * OS entry point to adjust the queue_depths on a per-device basis. 2344 * Called once per device the bus scan. Use it to force the queue_depth 2345 * member to 1 if a device does not support Q tags. 2346 * Return non-zero if fails. 2347 */ 2348 int 2349 mptscsih_slave_configure(struct scsi_device *sdev) 2350 { 2351 struct Scsi_Host *sh = sdev->host; 2352 VirtTarget *vtarget; 2353 VirtDevice *vdevice; 2354 struct scsi_target *starget; 2355 MPT_SCSI_HOST *hd = shost_priv(sh); 2356 MPT_ADAPTER *ioc = hd->ioc; 2357 2358 starget = scsi_target(sdev); 2359 vtarget = starget->hostdata; 2360 vdevice = sdev->hostdata; 2361 2362 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2363 "device @ %p, channel=%d, id=%d, lun=%llu\n", 2364 ioc->name, sdev, sdev->channel, sdev->id, sdev->lun)); 2365 if (ioc->bus_type == SPI) 2366 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2367 "sdtr %d wdtr %d ppr %d inq length=%d\n", 2368 ioc->name, sdev->sdtr, sdev->wdtr, 2369 sdev->ppr, sdev->inquiry_len)); 2370 2371 vdevice->configured_lun = 1; 2372 2373 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2374 "Queue depth=%d, tflags=%x\n", 2375 ioc->name, sdev->queue_depth, vtarget->tflags)); 2376 2377 if (ioc->bus_type == SPI) 2378 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2379 "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", 2380 ioc->name, vtarget->negoFlags, vtarget->maxOffset, 2381 vtarget->minSyncFactor)); 2382 2383 mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); 2384 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2385 "tagged %d, simple %d\n", 2386 ioc->name,sdev->tagged_supported, sdev->simple_tags)); 2387 2388 blk_queue_dma_alignment (sdev->request_queue, 512 - 1); 2389 2390 return 0; 2391 } 2392 2393 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2394 /* 2395 * Private routines... 2396 */ 2397 2398 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2399 /* Utility function to copy sense data from the scsi_cmnd buffer 2400 * to the FC and SCSI target structures. 2401 * 2402 */ 2403 static void 2404 mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) 2405 { 2406 VirtDevice *vdevice; 2407 SCSIIORequest_t *pReq; 2408 u32 sense_count = le32_to_cpu(pScsiReply->SenseCount); 2409 MPT_ADAPTER *ioc = hd->ioc; 2410 2411 /* Get target structure 2412 */ 2413 pReq = (SCSIIORequest_t *) mf; 2414 vdevice = sc->device->hostdata; 2415 2416 if (sense_count) { 2417 u8 *sense_data; 2418 int req_index; 2419 2420 /* Copy the sense received into the scsi command block. */ 2421 req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 2422 sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC)); 2423 memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC); 2424 2425 /* Log SMART data (asc = 0x5D, non-IM case only) if required. 2426 */ 2427 if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) { 2428 if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) { 2429 int idx; 2430 2431 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 2432 ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE; 2433 ioc->events[idx].eventContext = ioc->eventContext; 2434 2435 ioc->events[idx].data[0] = (pReq->LUN[1] << 24) | 2436 (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) | 2437 (sc->device->channel << 8) | sc->device->id; 2438 2439 ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12]; 2440 2441 ioc->eventContext++; 2442 if (ioc->pcidev->vendor == 2443 PCI_VENDOR_ID_IBM) { 2444 mptscsih_issue_sep_command(ioc, 2445 vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); 2446 vdevice->vtarget->tflags |= 2447 MPT_TARGET_FLAGS_LED_ON; 2448 } 2449 } 2450 } 2451 } else { 2452 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n", 2453 ioc->name)); 2454 } 2455 } 2456 2457 /** 2458 * mptscsih_get_scsi_lookup - retrieves scmd entry 2459 * @ioc: Pointer to MPT_ADAPTER structure 2460 * @i: index into the array 2461 * 2462 * Returns the scsi_cmd pointer 2463 */ 2464 struct scsi_cmnd * 2465 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) 2466 { 2467 unsigned long flags; 2468 struct scsi_cmnd *scmd; 2469 2470 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2471 scmd = ioc->ScsiLookup[i]; 2472 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2473 2474 return scmd; 2475 } 2476 EXPORT_SYMBOL(mptscsih_get_scsi_lookup); 2477 2478 /** 2479 * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list 2480 * @ioc: Pointer to MPT_ADAPTER structure 2481 * @i: index into the array 2482 * 2483 * Returns the scsi_cmd pointer 2484 * 2485 **/ 2486 static struct scsi_cmnd * 2487 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i) 2488 { 2489 unsigned long flags; 2490 struct scsi_cmnd *scmd; 2491 2492 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2493 scmd = ioc->ScsiLookup[i]; 2494 ioc->ScsiLookup[i] = NULL; 2495 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2496 2497 return scmd; 2498 } 2499 2500 /** 2501 * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list 2502 * 2503 * @ioc: Pointer to MPT_ADAPTER structure 2504 * @i: index into the array 2505 * @scmd: scsi_cmnd pointer 2506 * 2507 **/ 2508 static void 2509 mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd) 2510 { 2511 unsigned long flags; 2512 2513 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2514 ioc->ScsiLookup[i] = scmd; 2515 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2516 } 2517 2518 /** 2519 * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list 2520 * @ioc: Pointer to MPT_ADAPTER structure 2521 * @sc: scsi_cmnd pointer 2522 */ 2523 static int 2524 SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc) 2525 { 2526 unsigned long flags; 2527 int i, index=-1; 2528 2529 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2530 for (i = 0; i < ioc->req_depth; i++) { 2531 if (ioc->ScsiLookup[i] == sc) { 2532 index = i; 2533 goto out; 2534 } 2535 } 2536 2537 out: 2538 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2539 return index; 2540 } 2541 2542 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2543 int 2544 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 2545 { 2546 MPT_SCSI_HOST *hd; 2547 2548 if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL) 2549 return 0; 2550 2551 hd = shost_priv(ioc->sh); 2552 switch (reset_phase) { 2553 case MPT_IOC_SETUP_RESET: 2554 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2555 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 2556 break; 2557 case MPT_IOC_PRE_RESET: 2558 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2559 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 2560 mptscsih_flush_running_cmds(hd); 2561 break; 2562 case MPT_IOC_POST_RESET: 2563 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2564 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 2565 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) { 2566 ioc->internal_cmds.status |= 2567 MPT_MGMT_STATUS_DID_IOCRESET; 2568 complete(&ioc->internal_cmds.done); 2569 } 2570 break; 2571 default: 2572 break; 2573 } 2574 return 1; /* currently means nothing really */ 2575 } 2576 2577 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2578 int 2579 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) 2580 { 2581 u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; 2582 2583 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2584 "MPT event (=%02Xh) routed to SCSI host driver!\n", 2585 ioc->name, event)); 2586 2587 if ((event == MPI_EVENT_IOC_BUS_RESET || 2588 event == MPI_EVENT_EXT_BUS_RESET) && 2589 (ioc->bus_type == SPI) && (ioc->soft_resets < -1)) 2590 ioc->soft_resets++; 2591 2592 return 1; /* currently means nothing really */ 2593 } 2594 2595 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2596 /* 2597 * Bus Scan and Domain Validation functionality ... 2598 */ 2599 2600 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2601 /* 2602 * mptscsih_scandv_complete - Scan and DV callback routine registered 2603 * to Fustion MPT (base) driver. 2604 * 2605 * @ioc: Pointer to MPT_ADAPTER structure 2606 * @mf: Pointer to original MPT request frame 2607 * @mr: Pointer to MPT reply frame (NULL if TurboReply) 2608 * 2609 * This routine is called from mpt.c::mpt_interrupt() at the completion 2610 * of any SCSI IO request. 2611 * This routine is registered with the Fusion MPT (base) driver at driver 2612 * load/init time via the mpt_register() API call. 2613 * 2614 * Returns 1 indicating alloc'd request frame ptr should be freed. 2615 * 2616 * Remark: Sets a completion code and (possibly) saves sense data 2617 * in the IOC member localReply structure. 2618 * Used ONLY for DV and other internal commands. 2619 */ 2620 int 2621 mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 2622 MPT_FRAME_HDR *reply) 2623 { 2624 SCSIIORequest_t *pReq; 2625 SCSIIOReply_t *pReply; 2626 u8 cmd; 2627 u16 req_idx; 2628 u8 *sense_data; 2629 int sz; 2630 2631 ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 2632 ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD; 2633 if (!reply) 2634 goto out; 2635 2636 pReply = (SCSIIOReply_t *) reply; 2637 pReq = (SCSIIORequest_t *) req; 2638 ioc->internal_cmds.completion_code = 2639 mptscsih_get_completion_code(ioc, req, reply); 2640 ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 2641 memcpy(ioc->internal_cmds.reply, reply, 2642 min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength)); 2643 cmd = reply->u.hdr.Function; 2644 if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) || 2645 (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) && 2646 (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) { 2647 req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx); 2648 sense_data = ((u8 *)ioc->sense_buf_pool + 2649 (req_idx * MPT_SENSE_BUFFER_ALLOC)); 2650 sz = min_t(int, pReq->SenseBufferLength, 2651 MPT_SENSE_BUFFER_ALLOC); 2652 memcpy(ioc->internal_cmds.sense, sense_data, sz); 2653 } 2654 out: 2655 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING)) 2656 return 0; 2657 ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 2658 complete(&ioc->internal_cmds.done); 2659 return 1; 2660 } 2661 2662 2663 /** 2664 * mptscsih_get_completion_code - get completion code from MPT request 2665 * @ioc: Pointer to MPT_ADAPTER structure 2666 * @req: Pointer to original MPT request frame 2667 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 2668 * 2669 **/ 2670 static int 2671 mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 2672 MPT_FRAME_HDR *reply) 2673 { 2674 SCSIIOReply_t *pReply; 2675 MpiRaidActionReply_t *pr; 2676 u8 scsi_status; 2677 u16 status; 2678 int completion_code; 2679 2680 pReply = (SCSIIOReply_t *)reply; 2681 status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 2682 scsi_status = pReply->SCSIStatus; 2683 2684 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2685 "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh," 2686 "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState, 2687 scsi_status, le32_to_cpu(pReply->IOCLogInfo))); 2688 2689 switch (status) { 2690 2691 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 2692 completion_code = MPT_SCANDV_SELECTION_TIMEOUT; 2693 break; 2694 2695 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 2696 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 2697 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 2698 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 2699 completion_code = MPT_SCANDV_DID_RESET; 2700 break; 2701 2702 case MPI_IOCSTATUS_BUSY: 2703 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: 2704 completion_code = MPT_SCANDV_BUSY; 2705 break; 2706 2707 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 2708 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 2709 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ 2710 if (pReply->Function == MPI_FUNCTION_CONFIG) { 2711 completion_code = MPT_SCANDV_GOOD; 2712 } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) { 2713 pr = (MpiRaidActionReply_t *)reply; 2714 if (le16_to_cpu(pr->ActionStatus) == 2715 MPI_RAID_ACTION_ASTATUS_SUCCESS) 2716 completion_code = MPT_SCANDV_GOOD; 2717 else 2718 completion_code = MPT_SCANDV_SOME_ERROR; 2719 } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) 2720 completion_code = MPT_SCANDV_SENSE; 2721 else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) { 2722 if (req->u.scsireq.CDB[0] == INQUIRY) 2723 completion_code = MPT_SCANDV_ISSUE_SENSE; 2724 else 2725 completion_code = MPT_SCANDV_DID_RESET; 2726 } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS) 2727 completion_code = MPT_SCANDV_DID_RESET; 2728 else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) 2729 completion_code = MPT_SCANDV_DID_RESET; 2730 else if (scsi_status == MPI_SCSI_STATUS_BUSY) 2731 completion_code = MPT_SCANDV_BUSY; 2732 else 2733 completion_code = MPT_SCANDV_GOOD; 2734 break; 2735 2736 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 2737 if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) 2738 completion_code = MPT_SCANDV_DID_RESET; 2739 else 2740 completion_code = MPT_SCANDV_SOME_ERROR; 2741 break; 2742 default: 2743 completion_code = MPT_SCANDV_SOME_ERROR; 2744 break; 2745 2746 } /* switch(status) */ 2747 2748 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2749 " completionCode set to %08xh\n", ioc->name, completion_code)); 2750 return completion_code; 2751 } 2752 2753 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2754 /** 2755 * mptscsih_do_cmd - Do internal command. 2756 * @hd: MPT_SCSI_HOST pointer 2757 * @io: INTERNAL_CMD pointer. 2758 * 2759 * Issue the specified internally generated command and do command 2760 * specific cleanup. For bus scan / DV only. 2761 * NOTES: If command is Inquiry and status is good, 2762 * initialize a target structure, save the data 2763 * 2764 * Remark: Single threaded access only. 2765 * 2766 * Return: 2767 * < 0 if an illegal command or no resources 2768 * 2769 * 0 if good 2770 * 2771 * > 0 if command complete but some type of completion error. 2772 */ 2773 static int 2774 mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) 2775 { 2776 MPT_FRAME_HDR *mf; 2777 SCSIIORequest_t *pScsiReq; 2778 int my_idx, ii, dir; 2779 int timeout; 2780 char cmdLen; 2781 char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; 2782 u8 cmd = io->cmd; 2783 MPT_ADAPTER *ioc = hd->ioc; 2784 int ret = 0; 2785 unsigned long timeleft; 2786 unsigned long flags; 2787 2788 /* don't send internal command during diag reset */ 2789 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2790 if (ioc->ioc_reset_in_progress) { 2791 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2792 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2793 "%s: busy with host reset\n", ioc->name, __func__)); 2794 return MPT_SCANDV_BUSY; 2795 } 2796 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2797 2798 mutex_lock(&ioc->internal_cmds.mutex); 2799 2800 /* Set command specific information 2801 */ 2802 switch (cmd) { 2803 case INQUIRY: 2804 cmdLen = 6; 2805 dir = MPI_SCSIIO_CONTROL_READ; 2806 CDB[0] = cmd; 2807 CDB[4] = io->size; 2808 timeout = 10; 2809 break; 2810 2811 case TEST_UNIT_READY: 2812 cmdLen = 6; 2813 dir = MPI_SCSIIO_CONTROL_READ; 2814 timeout = 10; 2815 break; 2816 2817 case START_STOP: 2818 cmdLen = 6; 2819 dir = MPI_SCSIIO_CONTROL_READ; 2820 CDB[0] = cmd; 2821 CDB[4] = 1; /*Spin up the disk */ 2822 timeout = 15; 2823 break; 2824 2825 case REQUEST_SENSE: 2826 cmdLen = 6; 2827 CDB[0] = cmd; 2828 CDB[4] = io->size; 2829 dir = MPI_SCSIIO_CONTROL_READ; 2830 timeout = 10; 2831 break; 2832 2833 case READ_BUFFER: 2834 cmdLen = 10; 2835 dir = MPI_SCSIIO_CONTROL_READ; 2836 CDB[0] = cmd; 2837 if (io->flags & MPT_ICFLAG_ECHO) { 2838 CDB[1] = 0x0A; 2839 } else { 2840 CDB[1] = 0x02; 2841 } 2842 2843 if (io->flags & MPT_ICFLAG_BUF_CAP) { 2844 CDB[1] |= 0x01; 2845 } 2846 CDB[6] = (io->size >> 16) & 0xFF; 2847 CDB[7] = (io->size >> 8) & 0xFF; 2848 CDB[8] = io->size & 0xFF; 2849 timeout = 10; 2850 break; 2851 2852 case WRITE_BUFFER: 2853 cmdLen = 10; 2854 dir = MPI_SCSIIO_CONTROL_WRITE; 2855 CDB[0] = cmd; 2856 if (io->flags & MPT_ICFLAG_ECHO) { 2857 CDB[1] = 0x0A; 2858 } else { 2859 CDB[1] = 0x02; 2860 } 2861 CDB[6] = (io->size >> 16) & 0xFF; 2862 CDB[7] = (io->size >> 8) & 0xFF; 2863 CDB[8] = io->size & 0xFF; 2864 timeout = 10; 2865 break; 2866 2867 case RESERVE: 2868 cmdLen = 6; 2869 dir = MPI_SCSIIO_CONTROL_READ; 2870 CDB[0] = cmd; 2871 timeout = 10; 2872 break; 2873 2874 case RELEASE: 2875 cmdLen = 6; 2876 dir = MPI_SCSIIO_CONTROL_READ; 2877 CDB[0] = cmd; 2878 timeout = 10; 2879 break; 2880 2881 case SYNCHRONIZE_CACHE: 2882 cmdLen = 10; 2883 dir = MPI_SCSIIO_CONTROL_READ; 2884 CDB[0] = cmd; 2885 // CDB[1] = 0x02; /* set immediate bit */ 2886 timeout = 10; 2887 break; 2888 2889 default: 2890 /* Error Case */ 2891 ret = -EFAULT; 2892 goto out; 2893 } 2894 2895 /* Get and Populate a free Frame 2896 * MsgContext set in mpt_get_msg_frame call 2897 */ 2898 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { 2899 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n", 2900 ioc->name, __func__)); 2901 ret = MPT_SCANDV_BUSY; 2902 goto out; 2903 } 2904 2905 pScsiReq = (SCSIIORequest_t *) mf; 2906 2907 /* Get the request index */ 2908 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 2909 ADD_INDEX_LOG(my_idx); /* for debug */ 2910 2911 if (io->flags & MPT_ICFLAG_PHYS_DISK) { 2912 pScsiReq->TargetID = io->physDiskNum; 2913 pScsiReq->Bus = 0; 2914 pScsiReq->ChainOffset = 0; 2915 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; 2916 } else { 2917 pScsiReq->TargetID = io->id; 2918 pScsiReq->Bus = io->channel; 2919 pScsiReq->ChainOffset = 0; 2920 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; 2921 } 2922 2923 pScsiReq->CDBLength = cmdLen; 2924 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 2925 2926 pScsiReq->Reserved = 0; 2927 2928 pScsiReq->MsgFlags = mpt_msg_flags(ioc); 2929 /* MsgContext set in mpt_get_msg_fram call */ 2930 2931 int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN); 2932 2933 if (io->flags & MPT_ICFLAG_TAGGED_CMD) 2934 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ); 2935 else 2936 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); 2937 2938 if (cmd == REQUEST_SENSE) { 2939 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); 2940 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2941 "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd)); 2942 } 2943 2944 for (ii = 0; ii < 16; ii++) 2945 pScsiReq->CDB[ii] = CDB[ii]; 2946 2947 pScsiReq->DataLength = cpu_to_le32(io->size); 2948 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma 2949 + (my_idx * MPT_SENSE_BUFFER_ALLOC)); 2950 2951 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2952 "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n", 2953 ioc->name, __func__, cmd, io->channel, io->id, io->lun)); 2954 2955 if (dir == MPI_SCSIIO_CONTROL_READ) 2956 ioc->add_sge((char *) &pScsiReq->SGL, 2957 MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma); 2958 else 2959 ioc->add_sge((char *) &pScsiReq->SGL, 2960 MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma); 2961 2962 INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status) 2963 mpt_put_msg_frame(ioc->InternalCtx, ioc, mf); 2964 timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 2965 timeout*HZ); 2966 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2967 ret = MPT_SCANDV_DID_RESET; 2968 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2969 "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__, 2970 cmd)); 2971 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 2972 mpt_free_msg_frame(ioc, mf); 2973 goto out; 2974 } 2975 if (!timeleft) { 2976 printk(MYIOC_s_WARN_FMT 2977 "Issuing Reset from %s!! doorbell=0x%08xh" 2978 " cmd=0x%02x\n", 2979 ioc->name, __func__, mpt_GetIocState(ioc, 0), 2980 cmd); 2981 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 2982 mpt_free_msg_frame(ioc, mf); 2983 } 2984 goto out; 2985 } 2986 2987 ret = ioc->internal_cmds.completion_code; 2988 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n", 2989 ioc->name, __func__, ret)); 2990 2991 out: 2992 CLEAR_MGMT_STATUS(ioc->internal_cmds.status) 2993 mutex_unlock(&ioc->internal_cmds.mutex); 2994 return ret; 2995 } 2996 2997 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2998 /** 2999 * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. 3000 * @hd: Pointer to a SCSI HOST structure 3001 * @vdevice: virtual target device 3002 * 3003 * Uses the ISR, but with special processing. 3004 * MUST be single-threaded. 3005 * 3006 */ 3007 static void 3008 mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice) 3009 { 3010 INTERNAL_CMD iocmd; 3011 3012 /* Ignore hidden raid components, this is handled when the command 3013 * is sent to the volume 3014 */ 3015 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 3016 return; 3017 3018 if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted || 3019 !vdevice->configured_lun) 3020 return; 3021 3022 /* Following parameters will not change 3023 * in this routine. 3024 */ 3025 iocmd.cmd = SYNCHRONIZE_CACHE; 3026 iocmd.flags = 0; 3027 iocmd.physDiskNum = -1; 3028 iocmd.data = NULL; 3029 iocmd.data_dma = -1; 3030 iocmd.size = 0; 3031 iocmd.rsvd = iocmd.rsvd2 = 0; 3032 iocmd.channel = vdevice->vtarget->channel; 3033 iocmd.id = vdevice->vtarget->id; 3034 iocmd.lun = vdevice->lun; 3035 3036 mptscsih_do_cmd(hd, &iocmd); 3037 } 3038 3039 static ssize_t 3040 mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr, 3041 char *buf) 3042 { 3043 struct Scsi_Host *host = class_to_shost(dev); 3044 MPT_SCSI_HOST *hd = shost_priv(host); 3045 MPT_ADAPTER *ioc = hd->ioc; 3046 3047 return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", 3048 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, 3049 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, 3050 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, 3051 ioc->facts.FWVersion.Word & 0x000000FF); 3052 } 3053 static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL); 3054 3055 static ssize_t 3056 mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr, 3057 char *buf) 3058 { 3059 struct Scsi_Host *host = class_to_shost(dev); 3060 MPT_SCSI_HOST *hd = shost_priv(host); 3061 MPT_ADAPTER *ioc = hd->ioc; 3062 3063 return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n", 3064 (ioc->biosVersion & 0xFF000000) >> 24, 3065 (ioc->biosVersion & 0x00FF0000) >> 16, 3066 (ioc->biosVersion & 0x0000FF00) >> 8, 3067 ioc->biosVersion & 0x000000FF); 3068 } 3069 static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL); 3070 3071 static ssize_t 3072 mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr, 3073 char *buf) 3074 { 3075 struct Scsi_Host *host = class_to_shost(dev); 3076 MPT_SCSI_HOST *hd = shost_priv(host); 3077 MPT_ADAPTER *ioc = hd->ioc; 3078 3079 return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion); 3080 } 3081 static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL); 3082 3083 static ssize_t 3084 mptscsih_version_product_show(struct device *dev, 3085 struct device_attribute *attr, 3086 char *buf) 3087 { 3088 struct Scsi_Host *host = class_to_shost(dev); 3089 MPT_SCSI_HOST *hd = shost_priv(host); 3090 MPT_ADAPTER *ioc = hd->ioc; 3091 3092 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name); 3093 } 3094 static DEVICE_ATTR(version_product, S_IRUGO, 3095 mptscsih_version_product_show, NULL); 3096 3097 static ssize_t 3098 mptscsih_version_nvdata_persistent_show(struct device *dev, 3099 struct device_attribute *attr, 3100 char *buf) 3101 { 3102 struct Scsi_Host *host = class_to_shost(dev); 3103 MPT_SCSI_HOST *hd = shost_priv(host); 3104 MPT_ADAPTER *ioc = hd->ioc; 3105 3106 return snprintf(buf, PAGE_SIZE, "%02xh\n", 3107 ioc->nvdata_version_persistent); 3108 } 3109 static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, 3110 mptscsih_version_nvdata_persistent_show, NULL); 3111 3112 static ssize_t 3113 mptscsih_version_nvdata_default_show(struct device *dev, 3114 struct device_attribute *attr, char *buf) 3115 { 3116 struct Scsi_Host *host = class_to_shost(dev); 3117 MPT_SCSI_HOST *hd = shost_priv(host); 3118 MPT_ADAPTER *ioc = hd->ioc; 3119 3120 return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default); 3121 } 3122 static DEVICE_ATTR(version_nvdata_default, S_IRUGO, 3123 mptscsih_version_nvdata_default_show, NULL); 3124 3125 static ssize_t 3126 mptscsih_board_name_show(struct device *dev, struct device_attribute *attr, 3127 char *buf) 3128 { 3129 struct Scsi_Host *host = class_to_shost(dev); 3130 MPT_SCSI_HOST *hd = shost_priv(host); 3131 MPT_ADAPTER *ioc = hd->ioc; 3132 3133 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name); 3134 } 3135 static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL); 3136 3137 static ssize_t 3138 mptscsih_board_assembly_show(struct device *dev, 3139 struct device_attribute *attr, char *buf) 3140 { 3141 struct Scsi_Host *host = class_to_shost(dev); 3142 MPT_SCSI_HOST *hd = shost_priv(host); 3143 MPT_ADAPTER *ioc = hd->ioc; 3144 3145 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly); 3146 } 3147 static DEVICE_ATTR(board_assembly, S_IRUGO, 3148 mptscsih_board_assembly_show, NULL); 3149 3150 static ssize_t 3151 mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr, 3152 char *buf) 3153 { 3154 struct Scsi_Host *host = class_to_shost(dev); 3155 MPT_SCSI_HOST *hd = shost_priv(host); 3156 MPT_ADAPTER *ioc = hd->ioc; 3157 3158 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer); 3159 } 3160 static DEVICE_ATTR(board_tracer, S_IRUGO, 3161 mptscsih_board_tracer_show, NULL); 3162 3163 static ssize_t 3164 mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr, 3165 char *buf) 3166 { 3167 struct Scsi_Host *host = class_to_shost(dev); 3168 MPT_SCSI_HOST *hd = shost_priv(host); 3169 MPT_ADAPTER *ioc = hd->ioc; 3170 3171 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); 3172 } 3173 static DEVICE_ATTR(io_delay, S_IRUGO, 3174 mptscsih_io_delay_show, NULL); 3175 3176 static ssize_t 3177 mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr, 3178 char *buf) 3179 { 3180 struct Scsi_Host *host = class_to_shost(dev); 3181 MPT_SCSI_HOST *hd = shost_priv(host); 3182 MPT_ADAPTER *ioc = hd->ioc; 3183 3184 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); 3185 } 3186 static DEVICE_ATTR(device_delay, S_IRUGO, 3187 mptscsih_device_delay_show, NULL); 3188 3189 static ssize_t 3190 mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr, 3191 char *buf) 3192 { 3193 struct Scsi_Host *host = class_to_shost(dev); 3194 MPT_SCSI_HOST *hd = shost_priv(host); 3195 MPT_ADAPTER *ioc = hd->ioc; 3196 3197 return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level); 3198 } 3199 static ssize_t 3200 mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr, 3201 const char *buf, size_t count) 3202 { 3203 struct Scsi_Host *host = class_to_shost(dev); 3204 MPT_SCSI_HOST *hd = shost_priv(host); 3205 MPT_ADAPTER *ioc = hd->ioc; 3206 int val = 0; 3207 3208 if (sscanf(buf, "%x", &val) != 1) 3209 return -EINVAL; 3210 3211 ioc->debug_level = val; 3212 printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n", 3213 ioc->name, ioc->debug_level); 3214 return strlen(buf); 3215 } 3216 static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR, 3217 mptscsih_debug_level_show, mptscsih_debug_level_store); 3218 3219 struct device_attribute *mptscsih_host_attrs[] = { 3220 &dev_attr_version_fw, 3221 &dev_attr_version_bios, 3222 &dev_attr_version_mpi, 3223 &dev_attr_version_product, 3224 &dev_attr_version_nvdata_persistent, 3225 &dev_attr_version_nvdata_default, 3226 &dev_attr_board_name, 3227 &dev_attr_board_assembly, 3228 &dev_attr_board_tracer, 3229 &dev_attr_io_delay, 3230 &dev_attr_device_delay, 3231 &dev_attr_debug_level, 3232 NULL, 3233 }; 3234 3235 EXPORT_SYMBOL(mptscsih_host_attrs); 3236 3237 EXPORT_SYMBOL(mptscsih_remove); 3238 EXPORT_SYMBOL(mptscsih_shutdown); 3239 #ifdef CONFIG_PM 3240 EXPORT_SYMBOL(mptscsih_suspend); 3241 EXPORT_SYMBOL(mptscsih_resume); 3242 #endif 3243 EXPORT_SYMBOL(mptscsih_show_info); 3244 EXPORT_SYMBOL(mptscsih_info); 3245 EXPORT_SYMBOL(mptscsih_qcmd); 3246 EXPORT_SYMBOL(mptscsih_slave_destroy); 3247 EXPORT_SYMBOL(mptscsih_slave_configure); 3248 EXPORT_SYMBOL(mptscsih_abort); 3249 EXPORT_SYMBOL(mptscsih_dev_reset); 3250 EXPORT_SYMBOL(mptscsih_bus_reset); 3251 EXPORT_SYMBOL(mptscsih_host_reset); 3252 EXPORT_SYMBOL(mptscsih_bios_param); 3253 EXPORT_SYMBOL(mptscsih_io_done); 3254 EXPORT_SYMBOL(mptscsih_taskmgmt_complete); 3255 EXPORT_SYMBOL(mptscsih_scandv_complete); 3256 EXPORT_SYMBOL(mptscsih_event_process); 3257 EXPORT_SYMBOL(mptscsih_ioc_reset); 3258 EXPORT_SYMBOL(mptscsih_change_queue_depth); 3259 3260 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3261