1 /* 2 * linux/drivers/message/fusion/mptscsih.c 3 * For use with LSI PCI chip/adapter(s) 4 * running LSI Fusion MPT (Message Passing Technology) firmware. 5 * 6 * Copyright (c) 1999-2008 LSI Corporation 7 * (mailto:DL-MPTFusionLinux@lsi.com) 8 * 9 */ 10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 11 /* 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; version 2 of the License. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 NO WARRANTY 22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 26 solely responsible for determining the appropriateness of using and 27 distributing the Program and assumes all risks associated with its 28 exercise of rights under this Agreement, including but not limited to 29 the risks and costs of program errors, damage to or loss of data, 30 programs or equipment, and unavailability or interruption of operations. 31 32 DISCLAIMER OF LIABILITY 33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 40 41 You should have received a copy of the GNU General Public License 42 along with this program; if not, write to the Free Software 43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 44 */ 45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 46 47 #include <linux/module.h> 48 #include <linux/kernel.h> 49 #include <linux/slab.h> 50 #include <linux/init.h> 51 #include <linux/errno.h> 52 #include <linux/kdev_t.h> 53 #include <linux/blkdev.h> 54 #include <linux/delay.h> /* for mdelay */ 55 #include <linux/interrupt.h> 56 #include <linux/reboot.h> /* notifier code */ 57 #include <linux/workqueue.h> 58 59 #include <scsi/scsi.h> 60 #include <scsi/scsi_cmnd.h> 61 #include <scsi/scsi_device.h> 62 #include <scsi/scsi_host.h> 63 #include <scsi/scsi_tcq.h> 64 #include <scsi/scsi_dbg.h> 65 66 #include "mptbase.h" 67 #include "mptscsih.h" 68 #include "lsi/mpi_log_sas.h" 69 70 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 71 #define my_NAME "Fusion MPT SCSI Host driver" 72 #define my_VERSION MPT_LINUX_VERSION_COMMON 73 #define MYNAM "mptscsih" 74 75 MODULE_AUTHOR(MODULEAUTHOR); 76 MODULE_DESCRIPTION(my_NAME); 77 MODULE_LICENSE("GPL"); 78 MODULE_VERSION(my_VERSION); 79 80 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 81 /* 82 * Other private/forward protos... 83 */ 84 struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i); 85 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i); 86 static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd); 87 static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd); 88 int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); 89 static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq); 90 int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); 91 92 static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, 93 SCSIIORequest_t *pReq, int req_idx); 94 static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx); 95 static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply); 96 97 int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, 98 u64 lun, int ctx2abort, ulong timeout); 99 100 int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); 101 int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); 102 103 void 104 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code); 105 static int mptscsih_get_completion_code(MPT_ADAPTER *ioc, 106 MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply); 107 int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); 108 static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); 109 static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice); 110 111 static int 112 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type, 113 SCSITaskMgmtReply_t *pScsiTmReply); 114 void mptscsih_remove(struct pci_dev *); 115 void mptscsih_shutdown(struct pci_dev *); 116 #ifdef CONFIG_PM 117 int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); 118 int mptscsih_resume(struct pci_dev *pdev); 119 #endif 120 121 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 123 /* 124 * mptscsih_getFreeChainBuffer - Function to get a free chain 125 * from the MPT_SCSI_HOST FreeChainQ. 126 * @ioc: Pointer to MPT_ADAPTER structure 127 * @req_idx: Index of the SCSI IO request frame. (output) 128 * 129 * return SUCCESS or FAILED 130 */ 131 static inline int 132 mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex) 133 { 134 MPT_FRAME_HDR *chainBuf; 135 unsigned long flags; 136 int rc; 137 int chain_idx; 138 139 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n", 140 ioc->name)); 141 spin_lock_irqsave(&ioc->FreeQlock, flags); 142 if (!list_empty(&ioc->FreeChainQ)) { 143 int offset; 144 145 chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR, 146 u.frame.linkage.list); 147 list_del(&chainBuf->u.frame.linkage.list); 148 offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer; 149 chain_idx = offset / ioc->req_sz; 150 rc = SUCCESS; 151 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT 152 "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n", 153 ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx)); 154 } else { 155 rc = FAILED; 156 chain_idx = MPT_HOST_NO_CHAIN; 157 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n", 158 ioc->name)); 159 } 160 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 161 162 *retIndex = chain_idx; 163 return rc; 164 } /* mptscsih_getFreeChainBuffer() */ 165 166 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 167 /* 168 * mptscsih_AddSGE - Add a SGE (plus chain buffers) to the 169 * SCSIIORequest_t Message Frame. 170 * @ioc: Pointer to MPT_ADAPTER structure 171 * @SCpnt: Pointer to scsi_cmnd structure 172 * @pReq: Pointer to SCSIIORequest_t structure 173 * 174 * Returns ... 175 */ 176 static int 177 mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt, 178 SCSIIORequest_t *pReq, int req_idx) 179 { 180 char *psge; 181 char *chainSge; 182 struct scatterlist *sg; 183 int frm_sz; 184 int sges_left, sg_done; 185 int chain_idx = MPT_HOST_NO_CHAIN; 186 int sgeOffset; 187 int numSgeSlots, numSgeThisFrame; 188 u32 sgflags, sgdir, thisxfer = 0; 189 int chain_dma_off = 0; 190 int newIndex; 191 int ii; 192 dma_addr_t v2; 193 u32 RequestNB; 194 195 sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK; 196 if (sgdir == MPI_SCSIIO_CONTROL_WRITE) { 197 sgdir = MPT_TRANSFER_HOST_TO_IOC; 198 } else { 199 sgdir = MPT_TRANSFER_IOC_TO_HOST; 200 } 201 202 psge = (char *) &pReq->SGL; 203 frm_sz = ioc->req_sz; 204 205 /* Map the data portion, if any. 206 * sges_left = 0 if no data transfer. 207 */ 208 sges_left = scsi_dma_map(SCpnt); 209 if (sges_left < 0) 210 return FAILED; 211 212 /* Handle the SG case. 213 */ 214 sg = scsi_sglist(SCpnt); 215 sg_done = 0; 216 sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION); 217 chainSge = NULL; 218 219 /* Prior to entering this loop - the following must be set 220 * current MF: sgeOffset (bytes) 221 * chainSge (Null if original MF is not a chain buffer) 222 * sg_done (num SGE done for this MF) 223 */ 224 225 nextSGEset: 226 numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size); 227 numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots; 228 229 sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir; 230 231 /* Get first (num - 1) SG elements 232 * Skip any SG entries with a length of 0 233 * NOTE: at finish, sg and psge pointed to NEXT data/location positions 234 */ 235 for (ii=0; ii < (numSgeThisFrame-1); ii++) { 236 thisxfer = sg_dma_len(sg); 237 if (thisxfer == 0) { 238 /* Get next SG element from the OS */ 239 sg = sg_next(sg); 240 sg_done++; 241 continue; 242 } 243 244 v2 = sg_dma_address(sg); 245 ioc->add_sge(psge, sgflags | thisxfer, v2); 246 247 /* Get next SG element from the OS */ 248 sg = sg_next(sg); 249 psge += ioc->SGE_size; 250 sgeOffset += ioc->SGE_size; 251 sg_done++; 252 } 253 254 if (numSgeThisFrame == sges_left) { 255 /* Add last element, end of buffer and end of list flags. 256 */ 257 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT | 258 MPT_SGE_FLAGS_END_OF_BUFFER | 259 MPT_SGE_FLAGS_END_OF_LIST; 260 261 /* Add last SGE and set termination flags. 262 * Note: Last SGE may have a length of 0 - which should be ok. 263 */ 264 thisxfer = sg_dma_len(sg); 265 266 v2 = sg_dma_address(sg); 267 ioc->add_sge(psge, sgflags | thisxfer, v2); 268 sgeOffset += ioc->SGE_size; 269 sg_done++; 270 271 if (chainSge) { 272 /* The current buffer is a chain buffer, 273 * but there is not another one. 274 * Update the chain element 275 * Offset and Length fields. 276 */ 277 ioc->add_chain((char *)chainSge, 0, sgeOffset, 278 ioc->ChainBufferDMA + chain_dma_off); 279 } else { 280 /* The current buffer is the original MF 281 * and there is no Chain buffer. 282 */ 283 pReq->ChainOffset = 0; 284 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; 285 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT 286 "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); 287 ioc->RequestNB[req_idx] = RequestNB; 288 } 289 } else { 290 /* At least one chain buffer is needed. 291 * Complete the first MF 292 * - last SGE element, set the LastElement bit 293 * - set ChainOffset (words) for orig MF 294 * (OR finish previous MF chain buffer) 295 * - update MFStructPtr ChainIndex 296 * - Populate chain element 297 * Also 298 * Loop until done. 299 */ 300 301 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n", 302 ioc->name, sg_done)); 303 304 /* Set LAST_ELEMENT flag for last non-chain element 305 * in the buffer. Since psge points at the NEXT 306 * SGE element, go back one SGE element, update the flags 307 * and reset the pointer. (Note: sgflags & thisxfer are already 308 * set properly). 309 */ 310 if (sg_done) { 311 u32 *ptmp = (u32 *) (psge - ioc->SGE_size); 312 sgflags = le32_to_cpu(*ptmp); 313 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT; 314 *ptmp = cpu_to_le32(sgflags); 315 } 316 317 if (chainSge) { 318 /* The current buffer is a chain buffer. 319 * chainSge points to the previous Chain Element. 320 * Update its chain element Offset and Length (must 321 * include chain element size) fields. 322 * Old chain element is now complete. 323 */ 324 u8 nextChain = (u8) (sgeOffset >> 2); 325 sgeOffset += ioc->SGE_size; 326 ioc->add_chain((char *)chainSge, nextChain, sgeOffset, 327 ioc->ChainBufferDMA + chain_dma_off); 328 } else { 329 /* The original MF buffer requires a chain buffer - 330 * set the offset. 331 * Last element in this MF is a chain element. 332 */ 333 pReq->ChainOffset = (u8) (sgeOffset >> 2); 334 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03; 335 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset)); 336 ioc->RequestNB[req_idx] = RequestNB; 337 } 338 339 sges_left -= sg_done; 340 341 342 /* NOTE: psge points to the beginning of the chain element 343 * in current buffer. Get a chain buffer. 344 */ 345 if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) { 346 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 347 "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n", 348 ioc->name, pReq->CDB[0], SCpnt)); 349 return FAILED; 350 } 351 352 /* Update the tracking arrays. 353 * If chainSge == NULL, update ReqToChain, else ChainToChain 354 */ 355 if (chainSge) { 356 ioc->ChainToChain[chain_idx] = newIndex; 357 } else { 358 ioc->ReqToChain[req_idx] = newIndex; 359 } 360 chain_idx = newIndex; 361 chain_dma_off = ioc->req_sz * chain_idx; 362 363 /* Populate the chainSGE for the current buffer. 364 * - Set chain buffer pointer to psge and fill 365 * out the Address and Flags fields. 366 */ 367 chainSge = (char *) psge; 368 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)", 369 ioc->name, psge, req_idx)); 370 371 /* Start the SGE for the next buffer 372 */ 373 psge = (char *) (ioc->ChainBuffer + chain_dma_off); 374 sgeOffset = 0; 375 sg_done = 0; 376 377 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n", 378 ioc->name, psge, chain_idx)); 379 380 /* Start the SGE for the next buffer 381 */ 382 383 goto nextSGEset; 384 } 385 386 return SUCCESS; 387 } /* mptscsih_AddSGE() */ 388 389 static void 390 mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget, 391 U32 SlotStatus) 392 { 393 MPT_FRAME_HDR *mf; 394 SEPRequest_t *SEPMsg; 395 396 if (ioc->bus_type != SAS) 397 return; 398 399 /* Not supported for hidden raid components 400 */ 401 if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 402 return; 403 404 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { 405 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n", 406 ioc->name,__func__)); 407 return; 408 } 409 410 SEPMsg = (SEPRequest_t *)mf; 411 SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; 412 SEPMsg->Bus = vtarget->channel; 413 SEPMsg->TargetID = vtarget->id; 414 SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS; 415 SEPMsg->SlotStatus = SlotStatus; 416 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 417 "Sending SEP cmd=%x channel=%d id=%d\n", 418 ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID)); 419 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); 420 } 421 422 #ifdef CONFIG_FUSION_LOGGING 423 /** 424 * mptscsih_info_scsiio - debug print info on reply frame 425 * @ioc: Pointer to MPT_ADAPTER structure 426 * @sc: original scsi cmnd pointer 427 * @pScsiReply: Pointer to MPT reply frame 428 * 429 * MPT_DEBUG_REPLY needs to be enabled to obtain this info 430 * 431 * Refer to lsi/mpi.h. 432 **/ 433 static void 434 mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply) 435 { 436 char *desc = NULL; 437 char *desc1 = NULL; 438 u16 ioc_status; 439 u8 skey, asc, ascq; 440 441 ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; 442 443 switch (ioc_status) { 444 445 case MPI_IOCSTATUS_SUCCESS: 446 desc = "success"; 447 break; 448 case MPI_IOCSTATUS_SCSI_INVALID_BUS: 449 desc = "invalid bus"; 450 break; 451 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: 452 desc = "invalid target_id"; 453 break; 454 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: 455 desc = "device not there"; 456 break; 457 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: 458 desc = "data overrun"; 459 break; 460 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: 461 desc = "data underrun"; 462 break; 463 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: 464 desc = "I/O data error"; 465 break; 466 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: 467 desc = "protocol error"; 468 break; 469 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: 470 desc = "task terminated"; 471 break; 472 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: 473 desc = "residual mismatch"; 474 break; 475 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: 476 desc = "task management failed"; 477 break; 478 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: 479 desc = "IOC terminated"; 480 break; 481 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: 482 desc = "ext terminated"; 483 break; 484 default: 485 desc = ""; 486 break; 487 } 488 489 switch (pScsiReply->SCSIStatus) 490 { 491 492 case MPI_SCSI_STATUS_SUCCESS: 493 desc1 = "success"; 494 break; 495 case MPI_SCSI_STATUS_CHECK_CONDITION: 496 desc1 = "check condition"; 497 break; 498 case MPI_SCSI_STATUS_CONDITION_MET: 499 desc1 = "condition met"; 500 break; 501 case MPI_SCSI_STATUS_BUSY: 502 desc1 = "busy"; 503 break; 504 case MPI_SCSI_STATUS_INTERMEDIATE: 505 desc1 = "intermediate"; 506 break; 507 case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET: 508 desc1 = "intermediate condmet"; 509 break; 510 case MPI_SCSI_STATUS_RESERVATION_CONFLICT: 511 desc1 = "reservation conflict"; 512 break; 513 case MPI_SCSI_STATUS_COMMAND_TERMINATED: 514 desc1 = "command terminated"; 515 break; 516 case MPI_SCSI_STATUS_TASK_SET_FULL: 517 desc1 = "task set full"; 518 break; 519 case MPI_SCSI_STATUS_ACA_ACTIVE: 520 desc1 = "aca active"; 521 break; 522 case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT: 523 desc1 = "fcpext device logged out"; 524 break; 525 case MPI_SCSI_STATUS_FCPEXT_NO_LINK: 526 desc1 = "fcpext no link"; 527 break; 528 case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED: 529 desc1 = "fcpext unassigned"; 530 break; 531 default: 532 desc1 = ""; 533 break; 534 } 535 536 scsi_print_command(sc); 537 printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n", 538 ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun); 539 printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, " 540 "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow, 541 scsi_get_resid(sc)); 542 printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, " 543 "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag), 544 le32_to_cpu(pScsiReply->TransferCount), sc->result); 545 546 printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), " 547 "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n", 548 ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus, 549 pScsiReply->SCSIState); 550 551 if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) { 552 skey = sc->sense_buffer[2] & 0x0F; 553 asc = sc->sense_buffer[12]; 554 ascq = sc->sense_buffer[13]; 555 556 printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: " 557 "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq); 558 } 559 560 /* 561 * Look for + dump FCP ResponseInfo[]! 562 */ 563 if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID && 564 pScsiReply->ResponseInfo) 565 printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n", 566 ioc->name, le32_to_cpu(pScsiReply->ResponseInfo)); 567 } 568 #endif 569 570 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 571 /* 572 * mptscsih_io_done - Main SCSI IO callback routine registered to 573 * Fusion MPT (base) driver 574 * @ioc: Pointer to MPT_ADAPTER structure 575 * @mf: Pointer to original MPT request frame 576 * @r: Pointer to MPT reply frame (NULL if TurboReply) 577 * 578 * This routine is called from mpt.c::mpt_interrupt() at the completion 579 * of any SCSI IO request. 580 * This routine is registered with the Fusion MPT (base) driver at driver 581 * load/init time via the mpt_register() API call. 582 * 583 * Returns 1 indicating alloc'd request frame ptr should be freed. 584 */ 585 int 586 mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) 587 { 588 struct scsi_cmnd *sc; 589 MPT_SCSI_HOST *hd; 590 SCSIIORequest_t *pScsiReq; 591 SCSIIOReply_t *pScsiReply; 592 u16 req_idx, req_idx_MR; 593 VirtDevice *vdevice; 594 VirtTarget *vtarget; 595 596 hd = shost_priv(ioc->sh); 597 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 598 req_idx_MR = (mr != NULL) ? 599 le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx; 600 601 /* Special case, where already freed message frame is received from 602 * Firmware. It happens with Resetting IOC. 603 * Return immediately. Do not care 604 */ 605 if ((req_idx != req_idx_MR) || 606 (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf)) 607 return 0; 608 609 sc = mptscsih_getclear_scsi_lookup(ioc, req_idx); 610 if (sc == NULL) { 611 MPIHeader_t *hdr = (MPIHeader_t *)mf; 612 613 /* Remark: writeSDP1 will use the ScsiDoneCtx 614 * If a SCSI I/O cmd, device disabled by OS and 615 * completion done. Cannot touch sc struct. Just free mem. 616 */ 617 if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST) 618 printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n", 619 ioc->name); 620 621 mptscsih_freeChainBuffers(ioc, req_idx); 622 return 1; 623 } 624 625 if ((unsigned char *)mf != sc->host_scribble) { 626 mptscsih_freeChainBuffers(ioc, req_idx); 627 return 1; 628 } 629 630 if (ioc->bus_type == SAS) { 631 VirtDevice *vdevice = sc->device->hostdata; 632 633 if (!vdevice || !vdevice->vtarget || 634 vdevice->vtarget->deleted) { 635 sc->result = DID_NO_CONNECT << 16; 636 goto out; 637 } 638 } 639 640 sc->host_scribble = NULL; 641 sc->result = DID_OK << 16; /* Set default reply as OK */ 642 pScsiReq = (SCSIIORequest_t *) mf; 643 pScsiReply = (SCSIIOReply_t *) mr; 644 645 if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){ 646 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT 647 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n", 648 ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag)); 649 }else{ 650 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT 651 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n", 652 ioc->name, mf, mr, sc, req_idx)); 653 } 654 655 if (pScsiReply == NULL) { 656 /* special context reply handling */ 657 ; 658 } else { 659 u32 xfer_cnt; 660 u16 status; 661 u8 scsi_state, scsi_status; 662 u32 log_info; 663 664 status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK; 665 666 scsi_state = pScsiReply->SCSIState; 667 scsi_status = pScsiReply->SCSIStatus; 668 xfer_cnt = le32_to_cpu(pScsiReply->TransferCount); 669 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt); 670 log_info = le32_to_cpu(pScsiReply->IOCLogInfo); 671 672 /* 673 * if we get a data underrun indication, yet no data was 674 * transferred and the SCSI status indicates that the 675 * command was never started, change the data underrun 676 * to success 677 */ 678 if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && 679 (scsi_status == MPI_SCSI_STATUS_BUSY || 680 scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT || 681 scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) { 682 status = MPI_IOCSTATUS_SUCCESS; 683 } 684 685 if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) 686 mptscsih_copy_sense_data(sc, hd, mf, pScsiReply); 687 688 /* 689 * Look for + dump FCP ResponseInfo[]! 690 */ 691 if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID && 692 pScsiReply->ResponseInfo) { 693 printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] " 694 "FCP_ResponseInfo=%08xh\n", ioc->name, 695 sc->device->host->host_no, sc->device->channel, 696 sc->device->id, sc->device->lun, 697 le32_to_cpu(pScsiReply->ResponseInfo)); 698 } 699 700 switch(status) { 701 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 702 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 703 /* CHECKME! 704 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry) 705 * But not: DID_BUS_BUSY lest one risk 706 * killing interrupt handler:-( 707 */ 708 sc->result = SAM_STAT_BUSY; 709 break; 710 711 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 712 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 713 sc->result = DID_BAD_TARGET << 16; 714 break; 715 716 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 717 /* Spoof to SCSI Selection Timeout! */ 718 if (ioc->bus_type != FC) 719 sc->result = DID_NO_CONNECT << 16; 720 /* else fibre, just stall until rescan event */ 721 else 722 sc->result = DID_REQUEUE << 16; 723 724 if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF) 725 hd->sel_timeout[pScsiReq->TargetID]++; 726 727 vdevice = sc->device->hostdata; 728 if (!vdevice) 729 break; 730 vtarget = vdevice->vtarget; 731 if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) { 732 mptscsih_issue_sep_command(ioc, vtarget, 733 MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED); 734 vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON; 735 } 736 break; 737 738 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 739 if ( ioc->bus_type == SAS ) { 740 u16 ioc_status = 741 le16_to_cpu(pScsiReply->IOCStatus); 742 if ((ioc_status & 743 MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) 744 && 745 ((log_info & SAS_LOGINFO_MASK) == 746 SAS_LOGINFO_NEXUS_LOSS)) { 747 VirtDevice *vdevice = 748 sc->device->hostdata; 749 750 /* flag the device as being in 751 * device removal delay so we can 752 * notify the midlayer to hold off 753 * on timeout eh */ 754 if (vdevice && vdevice-> 755 vtarget && 756 vdevice->vtarget-> 757 raidVolume) 758 printk(KERN_INFO 759 "Skipping Raid Volume" 760 "for inDMD\n"); 761 else if (vdevice && 762 vdevice->vtarget) 763 vdevice->vtarget-> 764 inDMD = 1; 765 766 sc->result = 767 (DID_TRANSPORT_DISRUPTED 768 << 16); 769 break; 770 } 771 } else if (ioc->bus_type == FC) { 772 /* 773 * The FC IOC may kill a request for variety of 774 * reasons, some of which may be recovered by a 775 * retry, some which are unlikely to be 776 * recovered. Return DID_ERROR instead of 777 * DID_RESET to permit retry of the command, 778 * just not an infinite number of them 779 */ 780 sc->result = DID_ERROR << 16; 781 break; 782 } 783 784 /* 785 * Allow non-SAS & non-NEXUS_LOSS to drop into below code 786 */ 787 fallthrough; 788 789 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 790 /* Linux handles an unsolicited DID_RESET better 791 * than an unsolicited DID_ABORT. 792 */ 793 sc->result = DID_RESET << 16; 794 break; 795 796 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 797 if (ioc->bus_type == FC) 798 sc->result = DID_ERROR << 16; 799 else 800 sc->result = DID_RESET << 16; 801 break; 802 803 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 804 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt); 805 if((xfer_cnt==0)||(sc->underflow > xfer_cnt)) 806 sc->result=DID_SOFT_ERROR << 16; 807 else /* Sufficient data transfer occurred */ 808 sc->result = (DID_OK << 16) | scsi_status; 809 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT 810 "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n", 811 ioc->name, sc->result, sc->device->channel, sc->device->id)); 812 break; 813 814 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 815 /* 816 * Do upfront check for valid SenseData and give it 817 * precedence! 818 */ 819 sc->result = (DID_OK << 16) | scsi_status; 820 if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) { 821 822 /* 823 * For an Errata on LSI53C1030 824 * When the length of request data 825 * and transfer data are different 826 * with result of command (READ or VERIFY), 827 * DID_SOFT_ERROR is set. 828 */ 829 if (ioc->bus_type == SPI) { 830 if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) || 831 pScsiReq->CDB[0] == READ_10 || 832 pScsiReq->CDB[0] == READ_12 || 833 (pScsiReq->CDB[0] == READ_16 && 834 ((pScsiReq->CDB[1] & 0x02) == 0)) || 835 pScsiReq->CDB[0] == VERIFY || 836 pScsiReq->CDB[0] == VERIFY_16) { 837 if (scsi_bufflen(sc) != 838 xfer_cnt) { 839 sc->result = 840 DID_SOFT_ERROR << 16; 841 printk(KERN_WARNING "Errata" 842 "on LSI53C1030 occurred." 843 "sc->req_bufflen=0x%02x," 844 "xfer_cnt=0x%02x\n", 845 scsi_bufflen(sc), 846 xfer_cnt); 847 } 848 } 849 } 850 851 if (xfer_cnt < sc->underflow) { 852 if (scsi_status == SAM_STAT_BUSY) 853 sc->result = SAM_STAT_BUSY; 854 else 855 sc->result = DID_SOFT_ERROR << 16; 856 } 857 if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) { 858 /* What to do? 859 */ 860 sc->result = DID_SOFT_ERROR << 16; 861 } 862 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { 863 /* Not real sure here either... */ 864 sc->result = DID_RESET << 16; 865 } 866 } 867 868 869 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT 870 " sc->underflow={report ERR if < %02xh bytes xfer'd}\n", 871 ioc->name, sc->underflow)); 872 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT 873 " ActBytesXferd=%02xh\n", ioc->name, xfer_cnt)); 874 875 /* Report Queue Full 876 */ 877 if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL) 878 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); 879 880 break; 881 882 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 883 scsi_set_resid(sc, 0); 884 fallthrough; 885 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 886 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ 887 sc->result = (DID_OK << 16) | scsi_status; 888 if (scsi_state == 0) { 889 ; 890 } else if (scsi_state & 891 MPI_SCSI_STATE_AUTOSENSE_VALID) { 892 893 /* 894 * For potential trouble on LSI53C1030. 895 * (date:2007.xx.) 896 * It is checked whether the length of 897 * request data is equal to 898 * the length of transfer and residual. 899 * MEDIUM_ERROR is set by incorrect data. 900 */ 901 if ((ioc->bus_type == SPI) && 902 (sc->sense_buffer[2] & 0x20)) { 903 u32 difftransfer; 904 difftransfer = 905 sc->sense_buffer[3] << 24 | 906 sc->sense_buffer[4] << 16 | 907 sc->sense_buffer[5] << 8 | 908 sc->sense_buffer[6]; 909 if (((sc->sense_buffer[3] & 0x80) == 910 0x80) && (scsi_bufflen(sc) 911 != xfer_cnt)) { 912 sc->sense_buffer[2] = 913 MEDIUM_ERROR; 914 sc->sense_buffer[12] = 0xff; 915 sc->sense_buffer[13] = 0xff; 916 printk(KERN_WARNING"Errata" 917 "on LSI53C1030 occurred." 918 "sc->req_bufflen=0x%02x," 919 "xfer_cnt=0x%02x\n" , 920 scsi_bufflen(sc), 921 xfer_cnt); 922 } 923 if (((sc->sense_buffer[3] & 0x80) 924 != 0x80) && 925 (scsi_bufflen(sc) != 926 xfer_cnt + difftransfer)) { 927 sc->sense_buffer[2] = 928 MEDIUM_ERROR; 929 sc->sense_buffer[12] = 0xff; 930 sc->sense_buffer[13] = 0xff; 931 printk(KERN_WARNING 932 "Errata on LSI53C1030 occurred" 933 "sc->req_bufflen=0x%02x," 934 " xfer_cnt=0x%02x," 935 "difftransfer=0x%02x\n", 936 scsi_bufflen(sc), 937 xfer_cnt, 938 difftransfer); 939 } 940 } 941 942 /* 943 * If running against circa 200003dd 909 MPT f/w, 944 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL 945 * (QUEUE_FULL) returned from device! --> get 0x0000?128 946 * and with SenseBytes set to 0. 947 */ 948 if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL) 949 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); 950 951 } 952 else if (scsi_state & 953 (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS) 954 ) { 955 /* 956 * What to do? 957 */ 958 sc->result = DID_SOFT_ERROR << 16; 959 } 960 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) { 961 /* Not real sure here either... */ 962 sc->result = DID_RESET << 16; 963 } 964 else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) { 965 /* Device Inq. data indicates that it supports 966 * QTags, but rejects QTag messages. 967 * This command completed OK. 968 * 969 * Not real sure here either so do nothing... */ 970 } 971 972 if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL) 973 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq); 974 975 /* Add handling of: 976 * Reservation Conflict, Busy, 977 * Command Terminated, CHECK 978 */ 979 break; 980 981 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 982 sc->result = DID_SOFT_ERROR << 16; 983 break; 984 985 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 986 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 987 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 988 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 989 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 990 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 991 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 992 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 993 default: 994 /* 995 * What to do? 996 */ 997 sc->result = DID_SOFT_ERROR << 16; 998 break; 999 1000 } /* switch(status) */ 1001 1002 #ifdef CONFIG_FUSION_LOGGING 1003 if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY)) 1004 mptscsih_info_scsiio(ioc, sc, pScsiReply); 1005 #endif 1006 1007 } /* end of address reply case */ 1008 out: 1009 /* Unmap the DMA buffers, if any. */ 1010 scsi_dma_unmap(sc); 1011 1012 sc->scsi_done(sc); /* Issue the command callback */ 1013 1014 /* Free Chain buffers */ 1015 mptscsih_freeChainBuffers(ioc, req_idx); 1016 return 1; 1017 } 1018 1019 /* 1020 * mptscsih_flush_running_cmds - For each command found, search 1021 * Scsi_Host instance taskQ and reply to OS. 1022 * Called only if recovering from a FW reload. 1023 * @hd: Pointer to a SCSI HOST structure 1024 * 1025 * Returns: None. 1026 * 1027 * Must be called while new I/Os are being queued. 1028 */ 1029 void 1030 mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) 1031 { 1032 MPT_ADAPTER *ioc = hd->ioc; 1033 struct scsi_cmnd *sc; 1034 SCSIIORequest_t *mf = NULL; 1035 int ii; 1036 int channel, id; 1037 1038 for (ii= 0; ii < ioc->req_depth; ii++) { 1039 sc = mptscsih_getclear_scsi_lookup(ioc, ii); 1040 if (!sc) 1041 continue; 1042 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii); 1043 if (!mf) 1044 continue; 1045 channel = mf->Bus; 1046 id = mf->TargetID; 1047 mptscsih_freeChainBuffers(ioc, ii); 1048 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf); 1049 if ((unsigned char *)mf != sc->host_scribble) 1050 continue; 1051 scsi_dma_unmap(sc); 1052 sc->result = DID_RESET << 16; 1053 sc->host_scribble = NULL; 1054 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT 1055 "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, " 1056 "idx=%x\n", ioc->name, channel, id, sc, mf, ii)); 1057 sc->scsi_done(sc); 1058 } 1059 } 1060 EXPORT_SYMBOL(mptscsih_flush_running_cmds); 1061 1062 /* 1063 * mptscsih_search_running_cmds - Delete any commands associated 1064 * with the specified target and lun. Function called only 1065 * when a lun is disable by mid-layer. 1066 * Do NOT access the referenced scsi_cmnd structure or 1067 * members. Will cause either a paging or NULL ptr error. 1068 * (BUT, BUT, BUT, the code does reference it! - mdr) 1069 * @hd: Pointer to a SCSI HOST structure 1070 * @vdevice: per device private data 1071 * 1072 * Returns: None. 1073 * 1074 * Called from slave_destroy. 1075 */ 1076 static void 1077 mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice) 1078 { 1079 SCSIIORequest_t *mf = NULL; 1080 int ii; 1081 struct scsi_cmnd *sc; 1082 struct scsi_lun lun; 1083 MPT_ADAPTER *ioc = hd->ioc; 1084 unsigned long flags; 1085 1086 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 1087 for (ii = 0; ii < ioc->req_depth; ii++) { 1088 if ((sc = ioc->ScsiLookup[ii]) != NULL) { 1089 1090 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii); 1091 if (mf == NULL) 1092 continue; 1093 /* If the device is a hidden raid component, then its 1094 * expected that the mf->function will be RAID_SCSI_IO 1095 */ 1096 if (vdevice->vtarget->tflags & 1097 MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function != 1098 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) 1099 continue; 1100 1101 int_to_scsilun(vdevice->lun, &lun); 1102 if ((mf->Bus != vdevice->vtarget->channel) || 1103 (mf->TargetID != vdevice->vtarget->id) || 1104 memcmp(lun.scsi_lun, mf->LUN, 8)) 1105 continue; 1106 1107 if ((unsigned char *)mf != sc->host_scribble) 1108 continue; 1109 ioc->ScsiLookup[ii] = NULL; 1110 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 1111 mptscsih_freeChainBuffers(ioc, ii); 1112 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf); 1113 scsi_dma_unmap(sc); 1114 sc->host_scribble = NULL; 1115 sc->result = DID_NO_CONNECT << 16; 1116 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, 1117 MYIOC_s_FMT "completing cmds: fw_channel %d, " 1118 "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, 1119 vdevice->vtarget->channel, vdevice->vtarget->id, 1120 sc, mf, ii)); 1121 sc->scsi_done(sc); 1122 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 1123 } 1124 } 1125 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 1126 return; 1127 } 1128 1129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1130 1131 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1132 /* 1133 * mptscsih_report_queue_full - Report QUEUE_FULL status returned 1134 * from a SCSI target device. 1135 * @sc: Pointer to scsi_cmnd structure 1136 * @pScsiReply: Pointer to SCSIIOReply_t 1137 * @pScsiReq: Pointer to original SCSI request 1138 * 1139 * This routine periodically reports QUEUE_FULL status returned from a 1140 * SCSI target device. It reports this to the console via kernel 1141 * printk() API call, not more than once every 10 seconds. 1142 */ 1143 static void 1144 mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq) 1145 { 1146 long time = jiffies; 1147 MPT_SCSI_HOST *hd; 1148 MPT_ADAPTER *ioc; 1149 1150 if (sc->device == NULL) 1151 return; 1152 if (sc->device->host == NULL) 1153 return; 1154 if ((hd = shost_priv(sc->device->host)) == NULL) 1155 return; 1156 ioc = hd->ioc; 1157 if (time - hd->last_queue_full > 10 * HZ) { 1158 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n", 1159 ioc->name, 0, sc->device->id, sc->device->lun)); 1160 hd->last_queue_full = time; 1161 } 1162 } 1163 1164 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1165 /* 1166 * mptscsih_remove - Removed scsi devices 1167 * @pdev: Pointer to pci_dev structure 1168 * 1169 * 1170 */ 1171 void 1172 mptscsih_remove(struct pci_dev *pdev) 1173 { 1174 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1175 struct Scsi_Host *host = ioc->sh; 1176 MPT_SCSI_HOST *hd; 1177 int sz1; 1178 1179 if (host == NULL) 1180 hd = NULL; 1181 else 1182 hd = shost_priv(host); 1183 1184 mptscsih_shutdown(pdev); 1185 1186 sz1=0; 1187 1188 if (ioc->ScsiLookup != NULL) { 1189 sz1 = ioc->req_depth * sizeof(void *); 1190 kfree(ioc->ScsiLookup); 1191 ioc->ScsiLookup = NULL; 1192 } 1193 1194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1195 "Free'd ScsiLookup (%d) memory\n", 1196 ioc->name, sz1)); 1197 1198 if (hd) 1199 kfree(hd->info_kbuf); 1200 1201 /* NULL the Scsi_Host pointer 1202 */ 1203 ioc->sh = NULL; 1204 1205 if (host) 1206 scsi_host_put(host); 1207 mpt_detach(pdev); 1208 1209 } 1210 1211 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1212 /* 1213 * mptscsih_shutdown - reboot notifier 1214 * 1215 */ 1216 void 1217 mptscsih_shutdown(struct pci_dev *pdev) 1218 { 1219 } 1220 1221 #ifdef CONFIG_PM 1222 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1223 /* 1224 * mptscsih_suspend - Fusion MPT scsi driver suspend routine. 1225 * 1226 * 1227 */ 1228 int 1229 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state) 1230 { 1231 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1232 1233 scsi_block_requests(ioc->sh); 1234 flush_scheduled_work(); 1235 mptscsih_shutdown(pdev); 1236 return mpt_suspend(pdev,state); 1237 } 1238 1239 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1240 /* 1241 * mptscsih_resume - Fusion MPT scsi driver resume routine. 1242 * 1243 * 1244 */ 1245 int 1246 mptscsih_resume(struct pci_dev *pdev) 1247 { 1248 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 1249 int rc; 1250 1251 rc = mpt_resume(pdev); 1252 scsi_unblock_requests(ioc->sh); 1253 return rc; 1254 } 1255 1256 #endif 1257 1258 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1259 /** 1260 * mptscsih_info - Return information about MPT adapter 1261 * @SChost: Pointer to Scsi_Host structure 1262 * 1263 * (linux scsi_host_template.info routine) 1264 * 1265 * Returns pointer to buffer where information was written. 1266 */ 1267 const char * 1268 mptscsih_info(struct Scsi_Host *SChost) 1269 { 1270 MPT_SCSI_HOST *h; 1271 int size = 0; 1272 1273 h = shost_priv(SChost); 1274 1275 if (h->info_kbuf == NULL) 1276 if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL) 1277 return h->info_kbuf; 1278 h->info_kbuf[0] = '\0'; 1279 1280 mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0); 1281 h->info_kbuf[size-1] = '\0'; 1282 1283 return h->info_kbuf; 1284 } 1285 1286 int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host) 1287 { 1288 MPT_SCSI_HOST *hd = shost_priv(host); 1289 MPT_ADAPTER *ioc = hd->ioc; 1290 1291 seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name); 1292 seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word); 1293 seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts); 1294 seq_printf(m, "MaxQ=%d\n", ioc->req_depth); 1295 1296 return 0; 1297 } 1298 1299 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1300 #define ADD_INDEX_LOG(req_ent) do { } while(0) 1301 1302 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1303 /** 1304 * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine. 1305 * @SCpnt: Pointer to scsi_cmnd structure 1306 * 1307 * (linux scsi_host_template.queuecommand routine) 1308 * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest 1309 * from a linux scsi_cmnd request and send it to the IOC. 1310 * 1311 * Returns 0. (rtn value discarded by linux scsi mid-layer) 1312 */ 1313 int 1314 mptscsih_qcmd(struct scsi_cmnd *SCpnt) 1315 { 1316 MPT_SCSI_HOST *hd; 1317 MPT_FRAME_HDR *mf; 1318 SCSIIORequest_t *pScsiReq; 1319 VirtDevice *vdevice = SCpnt->device->hostdata; 1320 u32 datalen; 1321 u32 scsictl; 1322 u32 scsidir; 1323 u32 cmd_len; 1324 int my_idx; 1325 int ii; 1326 MPT_ADAPTER *ioc; 1327 1328 hd = shost_priv(SCpnt->device->host); 1329 ioc = hd->ioc; 1330 1331 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n", 1332 ioc->name, SCpnt)); 1333 1334 if (ioc->taskmgmt_quiesce_io) 1335 return SCSI_MLQUEUE_HOST_BUSY; 1336 1337 /* 1338 * Put together a MPT SCSI request... 1339 */ 1340 if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { 1341 dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n", 1342 ioc->name)); 1343 return SCSI_MLQUEUE_HOST_BUSY; 1344 } 1345 1346 pScsiReq = (SCSIIORequest_t *) mf; 1347 1348 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 1349 1350 ADD_INDEX_LOG(my_idx); 1351 1352 /* TUR's being issued with scsictl=0x02000000 (DATA_IN)! 1353 * Seems we may receive a buffer (datalen>0) even when there 1354 * will be no data transfer! GRRRRR... 1355 */ 1356 if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) { 1357 datalen = scsi_bufflen(SCpnt); 1358 scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */ 1359 } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) { 1360 datalen = scsi_bufflen(SCpnt); 1361 scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */ 1362 } else { 1363 datalen = 0; 1364 scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER; 1365 } 1366 1367 /* Default to untagged. Once a target structure has been allocated, 1368 * use the Inquiry data to determine if device supports tagged. 1369 */ 1370 if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) && 1371 SCpnt->device->tagged_supported) 1372 scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; 1373 else 1374 scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED; 1375 1376 1377 /* Use the above information to set up the message frame 1378 */ 1379 pScsiReq->TargetID = (u8) vdevice->vtarget->id; 1380 pScsiReq->Bus = vdevice->vtarget->channel; 1381 pScsiReq->ChainOffset = 0; 1382 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 1383 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; 1384 else 1385 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; 1386 pScsiReq->CDBLength = SCpnt->cmd_len; 1387 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 1388 pScsiReq->Reserved = 0; 1389 pScsiReq->MsgFlags = mpt_msg_flags(ioc); 1390 int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN); 1391 pScsiReq->Control = cpu_to_le32(scsictl); 1392 1393 /* 1394 * Write SCSI CDB into the message 1395 */ 1396 cmd_len = SCpnt->cmd_len; 1397 for (ii=0; ii < cmd_len; ii++) 1398 pScsiReq->CDB[ii] = SCpnt->cmnd[ii]; 1399 1400 for (ii=cmd_len; ii < 16; ii++) 1401 pScsiReq->CDB[ii] = 0; 1402 1403 /* DataLength */ 1404 pScsiReq->DataLength = cpu_to_le32(datalen); 1405 1406 /* SenseBuffer low address */ 1407 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma 1408 + (my_idx * MPT_SENSE_BUFFER_ALLOC)); 1409 1410 /* Now add the SG list 1411 * Always have a SGE even if null length. 1412 */ 1413 if (datalen == 0) { 1414 /* Add a NULL SGE */ 1415 ioc->add_sge((char *)&pScsiReq->SGL, 1416 MPT_SGE_FLAGS_SSIMPLE_READ | 0, 1417 (dma_addr_t) -1); 1418 } else { 1419 /* Add a 32 or 64 bit SGE */ 1420 if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS) 1421 goto fail; 1422 } 1423 1424 SCpnt->host_scribble = (unsigned char *)mf; 1425 mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt); 1426 1427 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); 1428 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n", 1429 ioc->name, SCpnt, mf, my_idx)); 1430 DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf); 1431 return 0; 1432 1433 fail: 1434 mptscsih_freeChainBuffers(ioc, my_idx); 1435 mpt_free_msg_frame(ioc, mf); 1436 return SCSI_MLQUEUE_HOST_BUSY; 1437 } 1438 1439 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1440 /* 1441 * mptscsih_freeChainBuffers - Function to free chain buffers associated 1442 * with a SCSI IO request 1443 * @hd: Pointer to the MPT_SCSI_HOST instance 1444 * @req_idx: Index of the SCSI IO request frame. 1445 * 1446 * Called if SG chain buffer allocation fails and mptscsih callbacks. 1447 * No return. 1448 */ 1449 static void 1450 mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) 1451 { 1452 MPT_FRAME_HDR *chain; 1453 unsigned long flags; 1454 int chain_idx; 1455 int next; 1456 1457 /* Get the first chain index and reset 1458 * tracker state. 1459 */ 1460 chain_idx = ioc->ReqToChain[req_idx]; 1461 ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN; 1462 1463 while (chain_idx != MPT_HOST_NO_CHAIN) { 1464 1465 /* Save the next chain buffer index */ 1466 next = ioc->ChainToChain[chain_idx]; 1467 1468 /* Free this chain buffer and reset 1469 * tracker 1470 */ 1471 ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN; 1472 1473 chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer 1474 + (chain_idx * ioc->req_sz)); 1475 1476 spin_lock_irqsave(&ioc->FreeQlock, flags); 1477 list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ); 1478 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1479 1480 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n", 1481 ioc->name, chain_idx)); 1482 1483 /* handle next */ 1484 chain_idx = next; 1485 } 1486 return; 1487 } 1488 1489 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1490 /* 1491 * Reset Handling 1492 */ 1493 1494 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1495 /** 1496 * mptscsih_IssueTaskMgmt - Generic send Task Management function. 1497 * @hd: Pointer to MPT_SCSI_HOST structure 1498 * @type: Task Management type 1499 * @channel: channel number for task management 1500 * @id: Logical Target ID for reset (if appropriate) 1501 * @lun: Logical Unit for reset (if appropriate) 1502 * @ctx2abort: Context for the task to be aborted (if appropriate) 1503 * @timeout: timeout for task management control 1504 * 1505 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 1506 * or a non-interrupt thread. In the former, must not call schedule(). 1507 * 1508 * Not all fields are meaningfull for all task types. 1509 * 1510 * Returns 0 for SUCCESS, or FAILED. 1511 * 1512 **/ 1513 int 1514 mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun, 1515 int ctx2abort, ulong timeout) 1516 { 1517 MPT_FRAME_HDR *mf; 1518 SCSITaskMgmt_t *pScsiTm; 1519 int ii; 1520 int retval; 1521 MPT_ADAPTER *ioc = hd->ioc; 1522 u8 issue_hard_reset; 1523 u32 ioc_raw_state; 1524 unsigned long time_count; 1525 1526 issue_hard_reset = 0; 1527 ioc_raw_state = mpt_GetIocState(ioc, 0); 1528 1529 if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) { 1530 printk(MYIOC_s_WARN_FMT 1531 "TaskMgmt type=%x: IOC Not operational (0x%x)!\n", 1532 ioc->name, type, ioc_raw_state); 1533 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 1534 ioc->name, __func__); 1535 if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) 1536 printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset " 1537 "FAILED!!\n", ioc->name); 1538 return 0; 1539 } 1540 1541 /* DOORBELL ACTIVE check is not required if 1542 * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported. 1543 */ 1544 1545 if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) 1546 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) && 1547 (ioc_raw_state & MPI_DOORBELL_ACTIVE)) { 1548 printk(MYIOC_s_WARN_FMT 1549 "TaskMgmt type=%x: ioc_state: " 1550 "DOORBELL_ACTIVE (0x%x)!\n", 1551 ioc->name, type, ioc_raw_state); 1552 return FAILED; 1553 } 1554 1555 mutex_lock(&ioc->taskmgmt_cmds.mutex); 1556 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { 1557 mf = NULL; 1558 retval = FAILED; 1559 goto out; 1560 } 1561 1562 /* Return Fail to calling function if no message frames available. 1563 */ 1564 if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) { 1565 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1566 "TaskMgmt no msg frames!!\n", ioc->name)); 1567 retval = FAILED; 1568 mpt_clear_taskmgmt_in_progress_flag(ioc); 1569 goto out; 1570 } 1571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", 1572 ioc->name, mf)); 1573 1574 /* Format the Request 1575 */ 1576 pScsiTm = (SCSITaskMgmt_t *) mf; 1577 pScsiTm->TargetID = id; 1578 pScsiTm->Bus = channel; 1579 pScsiTm->ChainOffset = 0; 1580 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; 1581 1582 pScsiTm->Reserved = 0; 1583 pScsiTm->TaskType = type; 1584 pScsiTm->Reserved1 = 0; 1585 pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) 1586 ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0; 1587 1588 int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN); 1589 1590 for (ii=0; ii < 7; ii++) 1591 pScsiTm->Reserved2[ii] = 0; 1592 1593 pScsiTm->TaskMsgContext = ctx2abort; 1594 1595 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) " 1596 "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort, 1597 type, timeout)); 1598 1599 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm); 1600 1601 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) 1602 time_count = jiffies; 1603 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && 1604 (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) 1605 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf); 1606 else { 1607 retval = mpt_send_handshake_request(ioc->TaskCtx, ioc, 1608 sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP); 1609 if (retval) { 1610 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT 1611 "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n", 1612 ioc->name, mf, retval)); 1613 mpt_free_msg_frame(ioc, mf); 1614 mpt_clear_taskmgmt_in_progress_flag(ioc); 1615 goto out; 1616 } 1617 } 1618 1619 wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, 1620 timeout*HZ); 1621 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 1622 retval = FAILED; 1623 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT 1624 "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf)); 1625 mpt_clear_taskmgmt_in_progress_flag(ioc); 1626 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 1627 goto out; 1628 issue_hard_reset = 1; 1629 goto out; 1630 } 1631 1632 retval = mptscsih_taskmgmt_reply(ioc, type, 1633 (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply); 1634 1635 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1636 "TaskMgmt completed (%d seconds)\n", 1637 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000)); 1638 1639 out: 1640 1641 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) 1642 if (issue_hard_reset) { 1643 printk(MYIOC_s_WARN_FMT 1644 "Issuing Reset from %s!! doorbell=0x%08x\n", 1645 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 1646 retval = (ioc->bus_type == SAS) ? 1647 mpt_HardResetHandler(ioc, CAN_SLEEP) : 1648 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 1649 mpt_free_msg_frame(ioc, mf); 1650 } 1651 1652 retval = (retval == 0) ? 0 : FAILED; 1653 mutex_unlock(&ioc->taskmgmt_cmds.mutex); 1654 return retval; 1655 } 1656 EXPORT_SYMBOL(mptscsih_IssueTaskMgmt); 1657 1658 static int 1659 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) 1660 { 1661 switch (ioc->bus_type) { 1662 case FC: 1663 return 40; 1664 case SAS: 1665 return 30; 1666 case SPI: 1667 default: 1668 return 10; 1669 } 1670 } 1671 1672 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1673 /** 1674 * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant 1675 * @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted 1676 * 1677 * (linux scsi_host_template.eh_abort_handler routine) 1678 * 1679 * Returns SUCCESS or FAILED. 1680 **/ 1681 int 1682 mptscsih_abort(struct scsi_cmnd * SCpnt) 1683 { 1684 MPT_SCSI_HOST *hd; 1685 MPT_FRAME_HDR *mf; 1686 u32 ctx2abort; 1687 int scpnt_idx; 1688 int retval; 1689 VirtDevice *vdevice; 1690 MPT_ADAPTER *ioc; 1691 1692 /* If we can't locate our host adapter structure, return FAILED status. 1693 */ 1694 if ((hd = shost_priv(SCpnt->device->host)) == NULL) { 1695 SCpnt->result = DID_RESET << 16; 1696 SCpnt->scsi_done(SCpnt); 1697 printk(KERN_ERR MYNAM ": task abort: " 1698 "can't locate host! (sc=%p)\n", SCpnt); 1699 return FAILED; 1700 } 1701 1702 ioc = hd->ioc; 1703 printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n", 1704 ioc->name, SCpnt); 1705 scsi_print_command(SCpnt); 1706 1707 vdevice = SCpnt->device->hostdata; 1708 if (!vdevice || !vdevice->vtarget) { 1709 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1710 "task abort: device has been deleted (sc=%p)\n", 1711 ioc->name, SCpnt)); 1712 SCpnt->result = DID_NO_CONNECT << 16; 1713 SCpnt->scsi_done(SCpnt); 1714 retval = SUCCESS; 1715 goto out; 1716 } 1717 1718 /* Task aborts are not supported for hidden raid components. 1719 */ 1720 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { 1721 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1722 "task abort: hidden raid component (sc=%p)\n", 1723 ioc->name, SCpnt)); 1724 SCpnt->result = DID_RESET << 16; 1725 retval = FAILED; 1726 goto out; 1727 } 1728 1729 /* Task aborts are not supported for volumes. 1730 */ 1731 if (vdevice->vtarget->raidVolume) { 1732 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1733 "task abort: raid volume (sc=%p)\n", 1734 ioc->name, SCpnt)); 1735 SCpnt->result = DID_RESET << 16; 1736 retval = FAILED; 1737 goto out; 1738 } 1739 1740 /* Find this command 1741 */ 1742 if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) { 1743 /* Cmd not found in ScsiLookup. 1744 * Do OS callback. 1745 */ 1746 SCpnt->result = DID_RESET << 16; 1747 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: " 1748 "Command not in the active list! (sc=%p)\n", ioc->name, 1749 SCpnt)); 1750 retval = SUCCESS; 1751 goto out; 1752 } 1753 1754 if (ioc->timeouts < -1) 1755 ioc->timeouts++; 1756 1757 if (mpt_fwfault_debug) 1758 mpt_halt_firmware(ioc); 1759 1760 /* Most important! Set TaskMsgContext to SCpnt's MsgContext! 1761 * (the IO to be ABORT'd) 1762 * 1763 * NOTE: Since we do not byteswap MsgContext, we do not 1764 * swap it here either. It is an opaque cookie to 1765 * the controller, so it does not matter. -DaveM 1766 */ 1767 mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx); 1768 ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext; 1769 retval = mptscsih_IssueTaskMgmt(hd, 1770 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, 1771 vdevice->vtarget->channel, 1772 vdevice->vtarget->id, vdevice->lun, 1773 ctx2abort, mptscsih_get_tm_timeout(ioc)); 1774 1775 if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) { 1776 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1777 "task abort: command still in active list! (sc=%p)\n", 1778 ioc->name, SCpnt)); 1779 retval = FAILED; 1780 } else { 1781 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1782 "task abort: command cleared from active list! (sc=%p)\n", 1783 ioc->name, SCpnt)); 1784 retval = SUCCESS; 1785 } 1786 1787 out: 1788 printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n", 1789 ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval, 1790 SCpnt); 1791 1792 return retval; 1793 } 1794 1795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1796 /** 1797 * mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant 1798 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to 1799 * 1800 * (linux scsi_host_template.eh_dev_reset_handler routine) 1801 * 1802 * Returns SUCCESS or FAILED. 1803 **/ 1804 int 1805 mptscsih_dev_reset(struct scsi_cmnd * SCpnt) 1806 { 1807 MPT_SCSI_HOST *hd; 1808 int retval; 1809 VirtDevice *vdevice; 1810 MPT_ADAPTER *ioc; 1811 1812 /* If we can't locate our host adapter structure, return FAILED status. 1813 */ 1814 if ((hd = shost_priv(SCpnt->device->host)) == NULL){ 1815 printk(KERN_ERR MYNAM ": target reset: " 1816 "Can't locate host! (sc=%p)\n", SCpnt); 1817 return FAILED; 1818 } 1819 1820 ioc = hd->ioc; 1821 printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n", 1822 ioc->name, SCpnt); 1823 scsi_print_command(SCpnt); 1824 1825 vdevice = SCpnt->device->hostdata; 1826 if (!vdevice || !vdevice->vtarget) { 1827 retval = 0; 1828 goto out; 1829 } 1830 1831 /* Target reset to hidden raid component is not supported 1832 */ 1833 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { 1834 retval = FAILED; 1835 goto out; 1836 } 1837 1838 retval = mptscsih_IssueTaskMgmt(hd, 1839 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 1840 vdevice->vtarget->channel, 1841 vdevice->vtarget->id, 0, 0, 1842 mptscsih_get_tm_timeout(ioc)); 1843 1844 out: 1845 printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n", 1846 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); 1847 1848 if (retval == 0) 1849 return SUCCESS; 1850 else 1851 return FAILED; 1852 } 1853 1854 1855 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1856 /** 1857 * mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant 1858 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to 1859 * 1860 * (linux scsi_host_template.eh_bus_reset_handler routine) 1861 * 1862 * Returns SUCCESS or FAILED. 1863 **/ 1864 int 1865 mptscsih_bus_reset(struct scsi_cmnd * SCpnt) 1866 { 1867 MPT_SCSI_HOST *hd; 1868 int retval; 1869 VirtDevice *vdevice; 1870 MPT_ADAPTER *ioc; 1871 1872 /* If we can't locate our host adapter structure, return FAILED status. 1873 */ 1874 if ((hd = shost_priv(SCpnt->device->host)) == NULL){ 1875 printk(KERN_ERR MYNAM ": bus reset: " 1876 "Can't locate host! (sc=%p)\n", SCpnt); 1877 return FAILED; 1878 } 1879 1880 ioc = hd->ioc; 1881 printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n", 1882 ioc->name, SCpnt); 1883 scsi_print_command(SCpnt); 1884 1885 if (ioc->timeouts < -1) 1886 ioc->timeouts++; 1887 1888 vdevice = SCpnt->device->hostdata; 1889 if (!vdevice || !vdevice->vtarget) 1890 return SUCCESS; 1891 retval = mptscsih_IssueTaskMgmt(hd, 1892 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, 1893 vdevice->vtarget->channel, 0, 0, 0, 1894 mptscsih_get_tm_timeout(ioc)); 1895 1896 printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n", 1897 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); 1898 1899 if (retval == 0) 1900 return SUCCESS; 1901 else 1902 return FAILED; 1903 } 1904 1905 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1906 /** 1907 * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant) 1908 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to 1909 * 1910 * (linux scsi_host_template.eh_host_reset_handler routine) 1911 * 1912 * Returns SUCCESS or FAILED. 1913 */ 1914 int 1915 mptscsih_host_reset(struct scsi_cmnd *SCpnt) 1916 { 1917 MPT_SCSI_HOST * hd; 1918 int status = SUCCESS; 1919 MPT_ADAPTER *ioc; 1920 int retval; 1921 1922 /* If we can't locate the host to reset, then we failed. */ 1923 if ((hd = shost_priv(SCpnt->device->host)) == NULL){ 1924 printk(KERN_ERR MYNAM ": host reset: " 1925 "Can't locate host! (sc=%p)\n", SCpnt); 1926 return FAILED; 1927 } 1928 1929 /* make sure we have no outstanding commands at this stage */ 1930 mptscsih_flush_running_cmds(hd); 1931 1932 ioc = hd->ioc; 1933 printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n", 1934 ioc->name, SCpnt); 1935 1936 /* If our attempts to reset the host failed, then return a failed 1937 * status. The host will be taken off line by the SCSI mid-layer. 1938 */ 1939 retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 1940 if (retval < 0) 1941 status = FAILED; 1942 else 1943 status = SUCCESS; 1944 1945 printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n", 1946 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); 1947 1948 return status; 1949 } 1950 1951 static int 1952 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type, 1953 SCSITaskMgmtReply_t *pScsiTmReply) 1954 { 1955 u16 iocstatus; 1956 u32 termination_count; 1957 int retval; 1958 1959 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 1960 retval = FAILED; 1961 goto out; 1962 } 1963 1964 DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply); 1965 1966 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK; 1967 termination_count = le32_to_cpu(pScsiTmReply->TerminationCount); 1968 1969 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1970 "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n" 1971 "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n" 1972 "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus, 1973 pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus), 1974 le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode, 1975 termination_count)); 1976 1977 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 && 1978 pScsiTmReply->ResponseCode) 1979 mptscsih_taskmgmt_response_code(ioc, 1980 pScsiTmReply->ResponseCode); 1981 1982 if (iocstatus == MPI_IOCSTATUS_SUCCESS) { 1983 retval = 0; 1984 goto out; 1985 } 1986 1987 retval = FAILED; 1988 if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { 1989 if (termination_count == 1) 1990 retval = 0; 1991 goto out; 1992 } 1993 1994 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED || 1995 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED) 1996 retval = 0; 1997 1998 out: 1999 return retval; 2000 } 2001 2002 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2003 void 2004 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code) 2005 { 2006 char *desc; 2007 2008 switch (response_code) { 2009 case MPI_SCSITASKMGMT_RSP_TM_COMPLETE: 2010 desc = "The task completed."; 2011 break; 2012 case MPI_SCSITASKMGMT_RSP_INVALID_FRAME: 2013 desc = "The IOC received an invalid frame status."; 2014 break; 2015 case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: 2016 desc = "The task type is not supported."; 2017 break; 2018 case MPI_SCSITASKMGMT_RSP_TM_FAILED: 2019 desc = "The requested task failed."; 2020 break; 2021 case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED: 2022 desc = "The task completed successfully."; 2023 break; 2024 case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN: 2025 desc = "The LUN request is invalid."; 2026 break; 2027 case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: 2028 desc = "The task is in the IOC queue and has not been sent to target."; 2029 break; 2030 default: 2031 desc = "unknown"; 2032 break; 2033 } 2034 printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n", 2035 ioc->name, response_code, desc); 2036 } 2037 EXPORT_SYMBOL(mptscsih_taskmgmt_response_code); 2038 2039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2040 /** 2041 * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver 2042 * @ioc: Pointer to MPT_ADAPTER structure 2043 * @mf: Pointer to SCSI task mgmt request frame 2044 * @mr: Pointer to SCSI task mgmt reply frame 2045 * 2046 * This routine is called from mptbase.c::mpt_interrupt() at the completion 2047 * of any SCSI task management request. 2048 * This routine is registered with the MPT (base) driver at driver 2049 * load/init time via the mpt_register() API call. 2050 * 2051 * Returns 1 indicating alloc'd request frame ptr should be freed. 2052 **/ 2053 int 2054 mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, 2055 MPT_FRAME_HDR *mr) 2056 { 2057 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2058 "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr)); 2059 2060 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 2061 2062 if (!mr) 2063 goto out; 2064 2065 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 2066 memcpy(ioc->taskmgmt_cmds.reply, mr, 2067 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength)); 2068 out: 2069 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 2070 mpt_clear_taskmgmt_in_progress_flag(ioc); 2071 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 2072 complete(&ioc->taskmgmt_cmds.done); 2073 if (ioc->bus_type == SAS) 2074 ioc->schedule_target_reset(ioc); 2075 return 1; 2076 } 2077 return 0; 2078 } 2079 2080 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2081 /* 2082 * This is anyones guess quite frankly. 2083 */ 2084 int 2085 mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, 2086 sector_t capacity, int geom[]) 2087 { 2088 int heads; 2089 int sectors; 2090 sector_t cylinders; 2091 ulong dummy; 2092 2093 heads = 64; 2094 sectors = 32; 2095 2096 dummy = heads * sectors; 2097 cylinders = capacity; 2098 sector_div(cylinders,dummy); 2099 2100 /* 2101 * Handle extended translation size for logical drives 2102 * > 1Gb 2103 */ 2104 if ((ulong)capacity >= 0x200000) { 2105 heads = 255; 2106 sectors = 63; 2107 dummy = heads * sectors; 2108 cylinders = capacity; 2109 sector_div(cylinders,dummy); 2110 } 2111 2112 /* return result */ 2113 geom[0] = heads; 2114 geom[1] = sectors; 2115 geom[2] = cylinders; 2116 2117 return 0; 2118 } 2119 2120 /* Search IOC page 3 to determine if this is hidden physical disk 2121 * 2122 */ 2123 int 2124 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id) 2125 { 2126 struct inactive_raid_component_info *component_info; 2127 int i, j; 2128 RaidPhysDiskPage1_t *phys_disk; 2129 int rc = 0; 2130 int num_paths; 2131 2132 if (!ioc->raid_data.pIocPg3) 2133 goto out; 2134 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2135 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) && 2136 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) { 2137 rc = 1; 2138 goto out; 2139 } 2140 } 2141 2142 if (ioc->bus_type != SAS) 2143 goto out; 2144 2145 /* 2146 * Check if dual path 2147 */ 2148 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2149 num_paths = mpt_raid_phys_disk_get_num_paths(ioc, 2150 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum); 2151 if (num_paths < 2) 2152 continue; 2153 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + 2154 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); 2155 if (!phys_disk) 2156 continue; 2157 if ((mpt_raid_phys_disk_pg1(ioc, 2158 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum, 2159 phys_disk))) { 2160 kfree(phys_disk); 2161 continue; 2162 } 2163 for (j = 0; j < num_paths; j++) { 2164 if ((phys_disk->Path[j].Flags & 2165 MPI_RAID_PHYSDISK1_FLAG_INVALID)) 2166 continue; 2167 if ((phys_disk->Path[j].Flags & 2168 MPI_RAID_PHYSDISK1_FLAG_BROKEN)) 2169 continue; 2170 if ((id == phys_disk->Path[j].PhysDiskID) && 2171 (channel == phys_disk->Path[j].PhysDiskBus)) { 2172 rc = 1; 2173 kfree(phys_disk); 2174 goto out; 2175 } 2176 } 2177 kfree(phys_disk); 2178 } 2179 2180 2181 /* 2182 * Check inactive list for matching phys disks 2183 */ 2184 if (list_empty(&ioc->raid_data.inactive_list)) 2185 goto out; 2186 2187 mutex_lock(&ioc->raid_data.inactive_list_mutex); 2188 list_for_each_entry(component_info, &ioc->raid_data.inactive_list, 2189 list) { 2190 if ((component_info->d.PhysDiskID == id) && 2191 (component_info->d.PhysDiskBus == channel)) 2192 rc = 1; 2193 } 2194 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 2195 2196 out: 2197 return rc; 2198 } 2199 EXPORT_SYMBOL(mptscsih_is_phys_disk); 2200 2201 u8 2202 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id) 2203 { 2204 struct inactive_raid_component_info *component_info; 2205 int i, j; 2206 RaidPhysDiskPage1_t *phys_disk; 2207 int rc = -ENXIO; 2208 int num_paths; 2209 2210 if (!ioc->raid_data.pIocPg3) 2211 goto out; 2212 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2213 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) && 2214 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) { 2215 rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum; 2216 goto out; 2217 } 2218 } 2219 2220 if (ioc->bus_type != SAS) 2221 goto out; 2222 2223 /* 2224 * Check if dual path 2225 */ 2226 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { 2227 num_paths = mpt_raid_phys_disk_get_num_paths(ioc, 2228 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum); 2229 if (num_paths < 2) 2230 continue; 2231 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) + 2232 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL); 2233 if (!phys_disk) 2234 continue; 2235 if ((mpt_raid_phys_disk_pg1(ioc, 2236 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum, 2237 phys_disk))) { 2238 kfree(phys_disk); 2239 continue; 2240 } 2241 for (j = 0; j < num_paths; j++) { 2242 if ((phys_disk->Path[j].Flags & 2243 MPI_RAID_PHYSDISK1_FLAG_INVALID)) 2244 continue; 2245 if ((phys_disk->Path[j].Flags & 2246 MPI_RAID_PHYSDISK1_FLAG_BROKEN)) 2247 continue; 2248 if ((id == phys_disk->Path[j].PhysDiskID) && 2249 (channel == phys_disk->Path[j].PhysDiskBus)) { 2250 rc = phys_disk->PhysDiskNum; 2251 kfree(phys_disk); 2252 goto out; 2253 } 2254 } 2255 kfree(phys_disk); 2256 } 2257 2258 /* 2259 * Check inactive list for matching phys disks 2260 */ 2261 if (list_empty(&ioc->raid_data.inactive_list)) 2262 goto out; 2263 2264 mutex_lock(&ioc->raid_data.inactive_list_mutex); 2265 list_for_each_entry(component_info, &ioc->raid_data.inactive_list, 2266 list) { 2267 if ((component_info->d.PhysDiskID == id) && 2268 (component_info->d.PhysDiskBus == channel)) 2269 rc = component_info->d.PhysDiskNum; 2270 } 2271 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 2272 2273 out: 2274 return rc; 2275 } 2276 EXPORT_SYMBOL(mptscsih_raid_id_to_num); 2277 2278 /* 2279 * OS entry point to allow for host driver to free allocated memory 2280 * Called if no device present or device being unloaded 2281 */ 2282 void 2283 mptscsih_slave_destroy(struct scsi_device *sdev) 2284 { 2285 struct Scsi_Host *host = sdev->host; 2286 MPT_SCSI_HOST *hd = shost_priv(host); 2287 VirtTarget *vtarget; 2288 VirtDevice *vdevice; 2289 struct scsi_target *starget; 2290 2291 starget = scsi_target(sdev); 2292 vtarget = starget->hostdata; 2293 vdevice = sdev->hostdata; 2294 if (!vdevice) 2295 return; 2296 2297 mptscsih_search_running_cmds(hd, vdevice); 2298 vtarget->num_luns--; 2299 mptscsih_synchronize_cache(hd, vdevice); 2300 kfree(vdevice); 2301 sdev->hostdata = NULL; 2302 } 2303 2304 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2305 /* 2306 * mptscsih_change_queue_depth - This function will set a devices queue depth 2307 * @sdev: per scsi_device pointer 2308 * @qdepth: requested queue depth 2309 * 2310 * Adding support for new 'change_queue_depth' api. 2311 */ 2312 int 2313 mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) 2314 { 2315 MPT_SCSI_HOST *hd = shost_priv(sdev->host); 2316 VirtTarget *vtarget; 2317 struct scsi_target *starget; 2318 int max_depth; 2319 MPT_ADAPTER *ioc = hd->ioc; 2320 2321 starget = scsi_target(sdev); 2322 vtarget = starget->hostdata; 2323 2324 if (ioc->bus_type == SPI) { 2325 if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) 2326 max_depth = 1; 2327 else if (sdev->type == TYPE_DISK && 2328 vtarget->minSyncFactor <= MPT_ULTRA160) 2329 max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; 2330 else 2331 max_depth = MPT_SCSI_CMD_PER_DEV_LOW; 2332 } else 2333 max_depth = ioc->sh->can_queue; 2334 2335 if (!sdev->tagged_supported) 2336 max_depth = 1; 2337 2338 if (qdepth > max_depth) 2339 qdepth = max_depth; 2340 2341 return scsi_change_queue_depth(sdev, qdepth); 2342 } 2343 2344 /* 2345 * OS entry point to adjust the queue_depths on a per-device basis. 2346 * Called once per device the bus scan. Use it to force the queue_depth 2347 * member to 1 if a device does not support Q tags. 2348 * Return non-zero if fails. 2349 */ 2350 int 2351 mptscsih_slave_configure(struct scsi_device *sdev) 2352 { 2353 struct Scsi_Host *sh = sdev->host; 2354 VirtTarget *vtarget; 2355 VirtDevice *vdevice; 2356 struct scsi_target *starget; 2357 MPT_SCSI_HOST *hd = shost_priv(sh); 2358 MPT_ADAPTER *ioc = hd->ioc; 2359 2360 starget = scsi_target(sdev); 2361 vtarget = starget->hostdata; 2362 vdevice = sdev->hostdata; 2363 2364 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2365 "device @ %p, channel=%d, id=%d, lun=%llu\n", 2366 ioc->name, sdev, sdev->channel, sdev->id, sdev->lun)); 2367 if (ioc->bus_type == SPI) 2368 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2369 "sdtr %d wdtr %d ppr %d inq length=%d\n", 2370 ioc->name, sdev->sdtr, sdev->wdtr, 2371 sdev->ppr, sdev->inquiry_len)); 2372 2373 vdevice->configured_lun = 1; 2374 2375 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2376 "Queue depth=%d, tflags=%x\n", 2377 ioc->name, sdev->queue_depth, vtarget->tflags)); 2378 2379 if (ioc->bus_type == SPI) 2380 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2381 "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", 2382 ioc->name, vtarget->negoFlags, vtarget->maxOffset, 2383 vtarget->minSyncFactor)); 2384 2385 mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); 2386 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2387 "tagged %d, simple %d\n", 2388 ioc->name,sdev->tagged_supported, sdev->simple_tags)); 2389 2390 blk_queue_dma_alignment (sdev->request_queue, 512 - 1); 2391 2392 return 0; 2393 } 2394 2395 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2396 /* 2397 * Private routines... 2398 */ 2399 2400 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2401 /* Utility function to copy sense data from the scsi_cmnd buffer 2402 * to the FC and SCSI target structures. 2403 * 2404 */ 2405 static void 2406 mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) 2407 { 2408 VirtDevice *vdevice; 2409 SCSIIORequest_t *pReq; 2410 u32 sense_count = le32_to_cpu(pScsiReply->SenseCount); 2411 MPT_ADAPTER *ioc = hd->ioc; 2412 2413 /* Get target structure 2414 */ 2415 pReq = (SCSIIORequest_t *) mf; 2416 vdevice = sc->device->hostdata; 2417 2418 if (sense_count) { 2419 u8 *sense_data; 2420 int req_index; 2421 2422 /* Copy the sense received into the scsi command block. */ 2423 req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 2424 sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC)); 2425 memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC); 2426 2427 /* Log SMART data (asc = 0x5D, non-IM case only) if required. 2428 */ 2429 if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) { 2430 if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) { 2431 int idx; 2432 2433 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 2434 ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE; 2435 ioc->events[idx].eventContext = ioc->eventContext; 2436 2437 ioc->events[idx].data[0] = (pReq->LUN[1] << 24) | 2438 (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) | 2439 (sc->device->channel << 8) | sc->device->id; 2440 2441 ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12]; 2442 2443 ioc->eventContext++; 2444 if (ioc->pcidev->vendor == 2445 PCI_VENDOR_ID_IBM) { 2446 mptscsih_issue_sep_command(ioc, 2447 vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); 2448 vdevice->vtarget->tflags |= 2449 MPT_TARGET_FLAGS_LED_ON; 2450 } 2451 } 2452 } 2453 } else { 2454 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n", 2455 ioc->name)); 2456 } 2457 } 2458 2459 /** 2460 * mptscsih_get_scsi_lookup - retrieves scmd entry 2461 * @ioc: Pointer to MPT_ADAPTER structure 2462 * @i: index into the array 2463 * 2464 * Returns the scsi_cmd pointer 2465 */ 2466 struct scsi_cmnd * 2467 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) 2468 { 2469 unsigned long flags; 2470 struct scsi_cmnd *scmd; 2471 2472 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2473 scmd = ioc->ScsiLookup[i]; 2474 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2475 2476 return scmd; 2477 } 2478 EXPORT_SYMBOL(mptscsih_get_scsi_lookup); 2479 2480 /** 2481 * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list 2482 * @ioc: Pointer to MPT_ADAPTER structure 2483 * @i: index into the array 2484 * 2485 * Returns the scsi_cmd pointer 2486 * 2487 **/ 2488 static struct scsi_cmnd * 2489 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i) 2490 { 2491 unsigned long flags; 2492 struct scsi_cmnd *scmd; 2493 2494 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2495 scmd = ioc->ScsiLookup[i]; 2496 ioc->ScsiLookup[i] = NULL; 2497 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2498 2499 return scmd; 2500 } 2501 2502 /** 2503 * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list 2504 * 2505 * @ioc: Pointer to MPT_ADAPTER structure 2506 * @i: index into the array 2507 * @scmd: scsi_cmnd pointer 2508 * 2509 **/ 2510 static void 2511 mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd) 2512 { 2513 unsigned long flags; 2514 2515 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2516 ioc->ScsiLookup[i] = scmd; 2517 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2518 } 2519 2520 /** 2521 * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list 2522 * @ioc: Pointer to MPT_ADAPTER structure 2523 * @sc: scsi_cmnd pointer 2524 */ 2525 static int 2526 SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc) 2527 { 2528 unsigned long flags; 2529 int i, index=-1; 2530 2531 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); 2532 for (i = 0; i < ioc->req_depth; i++) { 2533 if (ioc->ScsiLookup[i] == sc) { 2534 index = i; 2535 goto out; 2536 } 2537 } 2538 2539 out: 2540 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); 2541 return index; 2542 } 2543 2544 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2545 int 2546 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 2547 { 2548 MPT_SCSI_HOST *hd; 2549 2550 if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL) 2551 return 0; 2552 2553 hd = shost_priv(ioc->sh); 2554 switch (reset_phase) { 2555 case MPT_IOC_SETUP_RESET: 2556 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2557 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 2558 break; 2559 case MPT_IOC_PRE_RESET: 2560 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2561 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 2562 mptscsih_flush_running_cmds(hd); 2563 break; 2564 case MPT_IOC_POST_RESET: 2565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2566 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 2567 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) { 2568 ioc->internal_cmds.status |= 2569 MPT_MGMT_STATUS_DID_IOCRESET; 2570 complete(&ioc->internal_cmds.done); 2571 } 2572 break; 2573 default: 2574 break; 2575 } 2576 return 1; /* currently means nothing really */ 2577 } 2578 2579 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2580 int 2581 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) 2582 { 2583 u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; 2584 2585 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2586 "MPT event (=%02Xh) routed to SCSI host driver!\n", 2587 ioc->name, event)); 2588 2589 if ((event == MPI_EVENT_IOC_BUS_RESET || 2590 event == MPI_EVENT_EXT_BUS_RESET) && 2591 (ioc->bus_type == SPI) && (ioc->soft_resets < -1)) 2592 ioc->soft_resets++; 2593 2594 return 1; /* currently means nothing really */ 2595 } 2596 2597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2598 /* 2599 * Bus Scan and Domain Validation functionality ... 2600 */ 2601 2602 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2603 /* 2604 * mptscsih_scandv_complete - Scan and DV callback routine registered 2605 * to Fustion MPT (base) driver. 2606 * 2607 * @ioc: Pointer to MPT_ADAPTER structure 2608 * @mf: Pointer to original MPT request frame 2609 * @mr: Pointer to MPT reply frame (NULL if TurboReply) 2610 * 2611 * This routine is called from mpt.c::mpt_interrupt() at the completion 2612 * of any SCSI IO request. 2613 * This routine is registered with the Fusion MPT (base) driver at driver 2614 * load/init time via the mpt_register() API call. 2615 * 2616 * Returns 1 indicating alloc'd request frame ptr should be freed. 2617 * 2618 * Remark: Sets a completion code and (possibly) saves sense data 2619 * in the IOC member localReply structure. 2620 * Used ONLY for DV and other internal commands. 2621 */ 2622 int 2623 mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 2624 MPT_FRAME_HDR *reply) 2625 { 2626 SCSIIORequest_t *pReq; 2627 SCSIIOReply_t *pReply; 2628 u8 cmd; 2629 u16 req_idx; 2630 u8 *sense_data; 2631 int sz; 2632 2633 ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 2634 ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD; 2635 if (!reply) 2636 goto out; 2637 2638 pReply = (SCSIIOReply_t *) reply; 2639 pReq = (SCSIIORequest_t *) req; 2640 ioc->internal_cmds.completion_code = 2641 mptscsih_get_completion_code(ioc, req, reply); 2642 ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 2643 memcpy(ioc->internal_cmds.reply, reply, 2644 min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength)); 2645 cmd = reply->u.hdr.Function; 2646 if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) || 2647 (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) && 2648 (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) { 2649 req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx); 2650 sense_data = ((u8 *)ioc->sense_buf_pool + 2651 (req_idx * MPT_SENSE_BUFFER_ALLOC)); 2652 sz = min_t(int, pReq->SenseBufferLength, 2653 MPT_SENSE_BUFFER_ALLOC); 2654 memcpy(ioc->internal_cmds.sense, sense_data, sz); 2655 } 2656 out: 2657 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING)) 2658 return 0; 2659 ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 2660 complete(&ioc->internal_cmds.done); 2661 return 1; 2662 } 2663 2664 2665 /** 2666 * mptscsih_get_completion_code - get completion code from MPT request 2667 * @ioc: Pointer to MPT_ADAPTER structure 2668 * @req: Pointer to original MPT request frame 2669 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 2670 * 2671 **/ 2672 static int 2673 mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 2674 MPT_FRAME_HDR *reply) 2675 { 2676 SCSIIOReply_t *pReply; 2677 MpiRaidActionReply_t *pr; 2678 u8 scsi_status; 2679 u16 status; 2680 int completion_code; 2681 2682 pReply = (SCSIIOReply_t *)reply; 2683 status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 2684 scsi_status = pReply->SCSIStatus; 2685 2686 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2687 "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh," 2688 "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState, 2689 scsi_status, le32_to_cpu(pReply->IOCLogInfo))); 2690 2691 switch (status) { 2692 2693 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 2694 completion_code = MPT_SCANDV_SELECTION_TIMEOUT; 2695 break; 2696 2697 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 2698 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 2699 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 2700 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 2701 completion_code = MPT_SCANDV_DID_RESET; 2702 break; 2703 2704 case MPI_IOCSTATUS_BUSY: 2705 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: 2706 completion_code = MPT_SCANDV_BUSY; 2707 break; 2708 2709 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 2710 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 2711 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ 2712 if (pReply->Function == MPI_FUNCTION_CONFIG) { 2713 completion_code = MPT_SCANDV_GOOD; 2714 } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) { 2715 pr = (MpiRaidActionReply_t *)reply; 2716 if (le16_to_cpu(pr->ActionStatus) == 2717 MPI_RAID_ACTION_ASTATUS_SUCCESS) 2718 completion_code = MPT_SCANDV_GOOD; 2719 else 2720 completion_code = MPT_SCANDV_SOME_ERROR; 2721 } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) 2722 completion_code = MPT_SCANDV_SENSE; 2723 else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) { 2724 if (req->u.scsireq.CDB[0] == INQUIRY) 2725 completion_code = MPT_SCANDV_ISSUE_SENSE; 2726 else 2727 completion_code = MPT_SCANDV_DID_RESET; 2728 } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS) 2729 completion_code = MPT_SCANDV_DID_RESET; 2730 else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) 2731 completion_code = MPT_SCANDV_DID_RESET; 2732 else if (scsi_status == MPI_SCSI_STATUS_BUSY) 2733 completion_code = MPT_SCANDV_BUSY; 2734 else 2735 completion_code = MPT_SCANDV_GOOD; 2736 break; 2737 2738 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 2739 if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED) 2740 completion_code = MPT_SCANDV_DID_RESET; 2741 else 2742 completion_code = MPT_SCANDV_SOME_ERROR; 2743 break; 2744 default: 2745 completion_code = MPT_SCANDV_SOME_ERROR; 2746 break; 2747 2748 } /* switch(status) */ 2749 2750 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2751 " completionCode set to %08xh\n", ioc->name, completion_code)); 2752 return completion_code; 2753 } 2754 2755 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2756 /** 2757 * mptscsih_do_cmd - Do internal command. 2758 * @hd: MPT_SCSI_HOST pointer 2759 * @io: INTERNAL_CMD pointer. 2760 * 2761 * Issue the specified internally generated command and do command 2762 * specific cleanup. For bus scan / DV only. 2763 * NOTES: If command is Inquiry and status is good, 2764 * initialize a target structure, save the data 2765 * 2766 * Remark: Single threaded access only. 2767 * 2768 * Return: 2769 * < 0 if an illegal command or no resources 2770 * 2771 * 0 if good 2772 * 2773 * > 0 if command complete but some type of completion error. 2774 */ 2775 static int 2776 mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) 2777 { 2778 MPT_FRAME_HDR *mf; 2779 SCSIIORequest_t *pScsiReq; 2780 int my_idx, ii, dir; 2781 int timeout; 2782 char cmdLen; 2783 char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; 2784 u8 cmd = io->cmd; 2785 MPT_ADAPTER *ioc = hd->ioc; 2786 int ret = 0; 2787 unsigned long timeleft; 2788 unsigned long flags; 2789 2790 /* don't send internal command during diag reset */ 2791 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2792 if (ioc->ioc_reset_in_progress) { 2793 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2794 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2795 "%s: busy with host reset\n", ioc->name, __func__)); 2796 return MPT_SCANDV_BUSY; 2797 } 2798 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2799 2800 mutex_lock(&ioc->internal_cmds.mutex); 2801 2802 /* Set command specific information 2803 */ 2804 switch (cmd) { 2805 case INQUIRY: 2806 cmdLen = 6; 2807 dir = MPI_SCSIIO_CONTROL_READ; 2808 CDB[0] = cmd; 2809 CDB[4] = io->size; 2810 timeout = 10; 2811 break; 2812 2813 case TEST_UNIT_READY: 2814 cmdLen = 6; 2815 dir = MPI_SCSIIO_CONTROL_READ; 2816 timeout = 10; 2817 break; 2818 2819 case START_STOP: 2820 cmdLen = 6; 2821 dir = MPI_SCSIIO_CONTROL_READ; 2822 CDB[0] = cmd; 2823 CDB[4] = 1; /*Spin up the disk */ 2824 timeout = 15; 2825 break; 2826 2827 case REQUEST_SENSE: 2828 cmdLen = 6; 2829 CDB[0] = cmd; 2830 CDB[4] = io->size; 2831 dir = MPI_SCSIIO_CONTROL_READ; 2832 timeout = 10; 2833 break; 2834 2835 case READ_BUFFER: 2836 cmdLen = 10; 2837 dir = MPI_SCSIIO_CONTROL_READ; 2838 CDB[0] = cmd; 2839 if (io->flags & MPT_ICFLAG_ECHO) { 2840 CDB[1] = 0x0A; 2841 } else { 2842 CDB[1] = 0x02; 2843 } 2844 2845 if (io->flags & MPT_ICFLAG_BUF_CAP) { 2846 CDB[1] |= 0x01; 2847 } 2848 CDB[6] = (io->size >> 16) & 0xFF; 2849 CDB[7] = (io->size >> 8) & 0xFF; 2850 CDB[8] = io->size & 0xFF; 2851 timeout = 10; 2852 break; 2853 2854 case WRITE_BUFFER: 2855 cmdLen = 10; 2856 dir = MPI_SCSIIO_CONTROL_WRITE; 2857 CDB[0] = cmd; 2858 if (io->flags & MPT_ICFLAG_ECHO) { 2859 CDB[1] = 0x0A; 2860 } else { 2861 CDB[1] = 0x02; 2862 } 2863 CDB[6] = (io->size >> 16) & 0xFF; 2864 CDB[7] = (io->size >> 8) & 0xFF; 2865 CDB[8] = io->size & 0xFF; 2866 timeout = 10; 2867 break; 2868 2869 case RESERVE: 2870 cmdLen = 6; 2871 dir = MPI_SCSIIO_CONTROL_READ; 2872 CDB[0] = cmd; 2873 timeout = 10; 2874 break; 2875 2876 case RELEASE: 2877 cmdLen = 6; 2878 dir = MPI_SCSIIO_CONTROL_READ; 2879 CDB[0] = cmd; 2880 timeout = 10; 2881 break; 2882 2883 case SYNCHRONIZE_CACHE: 2884 cmdLen = 10; 2885 dir = MPI_SCSIIO_CONTROL_READ; 2886 CDB[0] = cmd; 2887 // CDB[1] = 0x02; /* set immediate bit */ 2888 timeout = 10; 2889 break; 2890 2891 default: 2892 /* Error Case */ 2893 ret = -EFAULT; 2894 goto out; 2895 } 2896 2897 /* Get and Populate a free Frame 2898 * MsgContext set in mpt_get_msg_frame call 2899 */ 2900 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { 2901 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n", 2902 ioc->name, __func__)); 2903 ret = MPT_SCANDV_BUSY; 2904 goto out; 2905 } 2906 2907 pScsiReq = (SCSIIORequest_t *) mf; 2908 2909 /* Get the request index */ 2910 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); 2911 ADD_INDEX_LOG(my_idx); /* for debug */ 2912 2913 if (io->flags & MPT_ICFLAG_PHYS_DISK) { 2914 pScsiReq->TargetID = io->physDiskNum; 2915 pScsiReq->Bus = 0; 2916 pScsiReq->ChainOffset = 0; 2917 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; 2918 } else { 2919 pScsiReq->TargetID = io->id; 2920 pScsiReq->Bus = io->channel; 2921 pScsiReq->ChainOffset = 0; 2922 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; 2923 } 2924 2925 pScsiReq->CDBLength = cmdLen; 2926 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE; 2927 2928 pScsiReq->Reserved = 0; 2929 2930 pScsiReq->MsgFlags = mpt_msg_flags(ioc); 2931 /* MsgContext set in mpt_get_msg_fram call */ 2932 2933 int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN); 2934 2935 if (io->flags & MPT_ICFLAG_TAGGED_CMD) 2936 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ); 2937 else 2938 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); 2939 2940 if (cmd == REQUEST_SENSE) { 2941 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED); 2942 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2943 "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd)); 2944 } 2945 2946 for (ii = 0; ii < 16; ii++) 2947 pScsiReq->CDB[ii] = CDB[ii]; 2948 2949 pScsiReq->DataLength = cpu_to_le32(io->size); 2950 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma 2951 + (my_idx * MPT_SENSE_BUFFER_ALLOC)); 2952 2953 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2954 "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n", 2955 ioc->name, __func__, cmd, io->channel, io->id, io->lun)); 2956 2957 if (dir == MPI_SCSIIO_CONTROL_READ) 2958 ioc->add_sge((char *) &pScsiReq->SGL, 2959 MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma); 2960 else 2961 ioc->add_sge((char *) &pScsiReq->SGL, 2962 MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma); 2963 2964 INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status) 2965 mpt_put_msg_frame(ioc->InternalCtx, ioc, mf); 2966 timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 2967 timeout*HZ); 2968 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 2969 ret = MPT_SCANDV_DID_RESET; 2970 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2971 "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__, 2972 cmd)); 2973 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) { 2974 mpt_free_msg_frame(ioc, mf); 2975 goto out; 2976 } 2977 if (!timeleft) { 2978 printk(MYIOC_s_WARN_FMT 2979 "Issuing Reset from %s!! doorbell=0x%08xh" 2980 " cmd=0x%02x\n", 2981 ioc->name, __func__, mpt_GetIocState(ioc, 0), 2982 cmd); 2983 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 2984 mpt_free_msg_frame(ioc, mf); 2985 } 2986 goto out; 2987 } 2988 2989 ret = ioc->internal_cmds.completion_code; 2990 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n", 2991 ioc->name, __func__, ret)); 2992 2993 out: 2994 CLEAR_MGMT_STATUS(ioc->internal_cmds.status) 2995 mutex_unlock(&ioc->internal_cmds.mutex); 2996 return ret; 2997 } 2998 2999 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3000 /** 3001 * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. 3002 * @hd: Pointer to a SCSI HOST structure 3003 * @vdevice: virtual target device 3004 * 3005 * Uses the ISR, but with special processing. 3006 * MUST be single-threaded. 3007 * 3008 */ 3009 static void 3010 mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice) 3011 { 3012 INTERNAL_CMD iocmd; 3013 3014 /* Ignore hidden raid components, this is handled when the command 3015 * is sent to the volume 3016 */ 3017 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) 3018 return; 3019 3020 if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted || 3021 !vdevice->configured_lun) 3022 return; 3023 3024 /* Following parameters will not change 3025 * in this routine. 3026 */ 3027 iocmd.cmd = SYNCHRONIZE_CACHE; 3028 iocmd.flags = 0; 3029 iocmd.physDiskNum = -1; 3030 iocmd.data = NULL; 3031 iocmd.data_dma = -1; 3032 iocmd.size = 0; 3033 iocmd.rsvd = iocmd.rsvd2 = 0; 3034 iocmd.channel = vdevice->vtarget->channel; 3035 iocmd.id = vdevice->vtarget->id; 3036 iocmd.lun = vdevice->lun; 3037 3038 mptscsih_do_cmd(hd, &iocmd); 3039 } 3040 3041 static ssize_t 3042 mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr, 3043 char *buf) 3044 { 3045 struct Scsi_Host *host = class_to_shost(dev); 3046 MPT_SCSI_HOST *hd = shost_priv(host); 3047 MPT_ADAPTER *ioc = hd->ioc; 3048 3049 return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n", 3050 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, 3051 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, 3052 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, 3053 ioc->facts.FWVersion.Word & 0x000000FF); 3054 } 3055 static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL); 3056 3057 static ssize_t 3058 mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr, 3059 char *buf) 3060 { 3061 struct Scsi_Host *host = class_to_shost(dev); 3062 MPT_SCSI_HOST *hd = shost_priv(host); 3063 MPT_ADAPTER *ioc = hd->ioc; 3064 3065 return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n", 3066 (ioc->biosVersion & 0xFF000000) >> 24, 3067 (ioc->biosVersion & 0x00FF0000) >> 16, 3068 (ioc->biosVersion & 0x0000FF00) >> 8, 3069 ioc->biosVersion & 0x000000FF); 3070 } 3071 static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL); 3072 3073 static ssize_t 3074 mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr, 3075 char *buf) 3076 { 3077 struct Scsi_Host *host = class_to_shost(dev); 3078 MPT_SCSI_HOST *hd = shost_priv(host); 3079 MPT_ADAPTER *ioc = hd->ioc; 3080 3081 return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion); 3082 } 3083 static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL); 3084 3085 static ssize_t 3086 mptscsih_version_product_show(struct device *dev, 3087 struct device_attribute *attr, 3088 char *buf) 3089 { 3090 struct Scsi_Host *host = class_to_shost(dev); 3091 MPT_SCSI_HOST *hd = shost_priv(host); 3092 MPT_ADAPTER *ioc = hd->ioc; 3093 3094 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name); 3095 } 3096 static DEVICE_ATTR(version_product, S_IRUGO, 3097 mptscsih_version_product_show, NULL); 3098 3099 static ssize_t 3100 mptscsih_version_nvdata_persistent_show(struct device *dev, 3101 struct device_attribute *attr, 3102 char *buf) 3103 { 3104 struct Scsi_Host *host = class_to_shost(dev); 3105 MPT_SCSI_HOST *hd = shost_priv(host); 3106 MPT_ADAPTER *ioc = hd->ioc; 3107 3108 return snprintf(buf, PAGE_SIZE, "%02xh\n", 3109 ioc->nvdata_version_persistent); 3110 } 3111 static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, 3112 mptscsih_version_nvdata_persistent_show, NULL); 3113 3114 static ssize_t 3115 mptscsih_version_nvdata_default_show(struct device *dev, 3116 struct device_attribute *attr, char *buf) 3117 { 3118 struct Scsi_Host *host = class_to_shost(dev); 3119 MPT_SCSI_HOST *hd = shost_priv(host); 3120 MPT_ADAPTER *ioc = hd->ioc; 3121 3122 return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default); 3123 } 3124 static DEVICE_ATTR(version_nvdata_default, S_IRUGO, 3125 mptscsih_version_nvdata_default_show, NULL); 3126 3127 static ssize_t 3128 mptscsih_board_name_show(struct device *dev, struct device_attribute *attr, 3129 char *buf) 3130 { 3131 struct Scsi_Host *host = class_to_shost(dev); 3132 MPT_SCSI_HOST *hd = shost_priv(host); 3133 MPT_ADAPTER *ioc = hd->ioc; 3134 3135 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name); 3136 } 3137 static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL); 3138 3139 static ssize_t 3140 mptscsih_board_assembly_show(struct device *dev, 3141 struct device_attribute *attr, char *buf) 3142 { 3143 struct Scsi_Host *host = class_to_shost(dev); 3144 MPT_SCSI_HOST *hd = shost_priv(host); 3145 MPT_ADAPTER *ioc = hd->ioc; 3146 3147 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly); 3148 } 3149 static DEVICE_ATTR(board_assembly, S_IRUGO, 3150 mptscsih_board_assembly_show, NULL); 3151 3152 static ssize_t 3153 mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr, 3154 char *buf) 3155 { 3156 struct Scsi_Host *host = class_to_shost(dev); 3157 MPT_SCSI_HOST *hd = shost_priv(host); 3158 MPT_ADAPTER *ioc = hd->ioc; 3159 3160 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer); 3161 } 3162 static DEVICE_ATTR(board_tracer, S_IRUGO, 3163 mptscsih_board_tracer_show, NULL); 3164 3165 static ssize_t 3166 mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr, 3167 char *buf) 3168 { 3169 struct Scsi_Host *host = class_to_shost(dev); 3170 MPT_SCSI_HOST *hd = shost_priv(host); 3171 MPT_ADAPTER *ioc = hd->ioc; 3172 3173 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay); 3174 } 3175 static DEVICE_ATTR(io_delay, S_IRUGO, 3176 mptscsih_io_delay_show, NULL); 3177 3178 static ssize_t 3179 mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr, 3180 char *buf) 3181 { 3182 struct Scsi_Host *host = class_to_shost(dev); 3183 MPT_SCSI_HOST *hd = shost_priv(host); 3184 MPT_ADAPTER *ioc = hd->ioc; 3185 3186 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay); 3187 } 3188 static DEVICE_ATTR(device_delay, S_IRUGO, 3189 mptscsih_device_delay_show, NULL); 3190 3191 static ssize_t 3192 mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr, 3193 char *buf) 3194 { 3195 struct Scsi_Host *host = class_to_shost(dev); 3196 MPT_SCSI_HOST *hd = shost_priv(host); 3197 MPT_ADAPTER *ioc = hd->ioc; 3198 3199 return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level); 3200 } 3201 static ssize_t 3202 mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr, 3203 const char *buf, size_t count) 3204 { 3205 struct Scsi_Host *host = class_to_shost(dev); 3206 MPT_SCSI_HOST *hd = shost_priv(host); 3207 MPT_ADAPTER *ioc = hd->ioc; 3208 int val = 0; 3209 3210 if (sscanf(buf, "%x", &val) != 1) 3211 return -EINVAL; 3212 3213 ioc->debug_level = val; 3214 printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n", 3215 ioc->name, ioc->debug_level); 3216 return strlen(buf); 3217 } 3218 static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR, 3219 mptscsih_debug_level_show, mptscsih_debug_level_store); 3220 3221 struct device_attribute *mptscsih_host_attrs[] = { 3222 &dev_attr_version_fw, 3223 &dev_attr_version_bios, 3224 &dev_attr_version_mpi, 3225 &dev_attr_version_product, 3226 &dev_attr_version_nvdata_persistent, 3227 &dev_attr_version_nvdata_default, 3228 &dev_attr_board_name, 3229 &dev_attr_board_assembly, 3230 &dev_attr_board_tracer, 3231 &dev_attr_io_delay, 3232 &dev_attr_device_delay, 3233 &dev_attr_debug_level, 3234 NULL, 3235 }; 3236 3237 EXPORT_SYMBOL(mptscsih_host_attrs); 3238 3239 EXPORT_SYMBOL(mptscsih_remove); 3240 EXPORT_SYMBOL(mptscsih_shutdown); 3241 #ifdef CONFIG_PM 3242 EXPORT_SYMBOL(mptscsih_suspend); 3243 EXPORT_SYMBOL(mptscsih_resume); 3244 #endif 3245 EXPORT_SYMBOL(mptscsih_show_info); 3246 EXPORT_SYMBOL(mptscsih_info); 3247 EXPORT_SYMBOL(mptscsih_qcmd); 3248 EXPORT_SYMBOL(mptscsih_slave_destroy); 3249 EXPORT_SYMBOL(mptscsih_slave_configure); 3250 EXPORT_SYMBOL(mptscsih_abort); 3251 EXPORT_SYMBOL(mptscsih_dev_reset); 3252 EXPORT_SYMBOL(mptscsih_bus_reset); 3253 EXPORT_SYMBOL(mptscsih_host_reset); 3254 EXPORT_SYMBOL(mptscsih_bios_param); 3255 EXPORT_SYMBOL(mptscsih_io_done); 3256 EXPORT_SYMBOL(mptscsih_taskmgmt_complete); 3257 EXPORT_SYMBOL(mptscsih_scandv_complete); 3258 EXPORT_SYMBOL(mptscsih_event_process); 3259 EXPORT_SYMBOL(mptscsih_ioc_reset); 3260 EXPORT_SYMBOL(mptscsih_change_queue_depth); 3261 3262 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3263