1 /* 2 * linux/drivers/message/fusion/mptbase.c 3 * This is the Fusion MPT base driver which supports multiple 4 * (SCSI + LAN) specialized protocol drivers. 5 * For use with LSI PCI chip/adapter(s) 6 * running LSI Fusion MPT (Message Passing Technology) firmware. 7 * 8 * Copyright (c) 1999-2008 LSI Corporation 9 * (mailto:DL-MPTFusionLinux@lsi.com) 10 * 11 */ 12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 13 /* 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; version 2 of the License. 17 18 This program is distributed in the hope that it will be useful, 19 but WITHOUT ANY WARRANTY; without even the implied warranty of 20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 GNU General Public License for more details. 22 23 NO WARRANTY 24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 28 solely responsible for determining the appropriateness of using and 29 distributing the Program and assumes all risks associated with its 30 exercise of rights under this Agreement, including but not limited to 31 the risks and costs of program errors, damage to or loss of data, 32 programs or equipment, and unavailability or interruption of operations. 33 34 DISCLAIMER OF LIABILITY 35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 42 43 You should have received a copy of the GNU General Public License 44 along with this program; if not, write to the Free Software 45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 46 */ 47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 48 49 #include <linux/kernel.h> 50 #include <linux/module.h> 51 #include <linux/errno.h> 52 #include <linux/init.h> 53 #include <linux/seq_file.h> 54 #include <linux/slab.h> 55 #include <linux/types.h> 56 #include <linux/pci.h> 57 #include <linux/kdev_t.h> 58 #include <linux/blkdev.h> 59 #include <linux/delay.h> 60 #include <linux/interrupt.h> 61 #include <linux/dma-mapping.h> 62 #include <linux/kthread.h> 63 #include <scsi/scsi_host.h> 64 65 #include "mptbase.h" 66 #include "lsi/mpi_log_fc.h" 67 68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 69 #define my_NAME "Fusion MPT base driver" 70 #define my_VERSION MPT_LINUX_VERSION_COMMON 71 #define MYNAM "mptbase" 72 73 MODULE_AUTHOR(MODULEAUTHOR); 74 MODULE_DESCRIPTION(my_NAME); 75 MODULE_LICENSE("GPL"); 76 MODULE_VERSION(my_VERSION); 77 78 /* 79 * cmd line parameters 80 */ 81 82 static int mpt_msi_enable_spi; 83 module_param(mpt_msi_enable_spi, int, 0); 84 MODULE_PARM_DESC(mpt_msi_enable_spi, 85 " Enable MSI Support for SPI controllers (default=0)"); 86 87 static int mpt_msi_enable_fc; 88 module_param(mpt_msi_enable_fc, int, 0); 89 MODULE_PARM_DESC(mpt_msi_enable_fc, 90 " Enable MSI Support for FC controllers (default=0)"); 91 92 static int mpt_msi_enable_sas; 93 module_param(mpt_msi_enable_sas, int, 0); 94 MODULE_PARM_DESC(mpt_msi_enable_sas, 95 " Enable MSI Support for SAS controllers (default=0)"); 96 97 static int mpt_channel_mapping; 98 module_param(mpt_channel_mapping, int, 0); 99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); 100 101 static int mpt_debug_level; 102 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp); 103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, 104 &mpt_debug_level, 0600); 105 MODULE_PARM_DESC(mpt_debug_level, 106 " debug level - refer to mptdebug.h - (default=0)"); 107 108 int mpt_fwfault_debug; 109 EXPORT_SYMBOL(mpt_fwfault_debug); 110 module_param(mpt_fwfault_debug, int, 0600); 111 MODULE_PARM_DESC(mpt_fwfault_debug, 112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); 113 114 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] 115 [MPT_MAX_CALLBACKNAME_LEN+1]; 116 117 #ifdef MFCNT 118 static int mfcounter = 0; 119 #define PRINT_MF_COUNT 20000 120 #endif 121 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 123 /* 124 * Public data... 125 */ 126 127 #define WHOINIT_UNKNOWN 0xAA 128 129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 130 /* 131 * Private data... 132 */ 133 /* Adapter link list */ 134 LIST_HEAD(ioc_list); 135 /* Callback lookup table */ 136 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; 137 /* Protocol driver class lookup table */ 138 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; 139 /* Event handler lookup table */ 140 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 141 /* Reset handler lookup table */ 142 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 143 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 144 145 #ifdef CONFIG_PROC_FS 146 static struct proc_dir_entry *mpt_proc_root_dir; 147 #endif 148 149 /* 150 * Driver Callback Index's 151 */ 152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; 153 static u8 last_drv_idx; 154 155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 156 /* 157 * Forward protos... 158 */ 159 static irqreturn_t mpt_interrupt(int irq, void *bus_id); 160 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 161 MPT_FRAME_HDR *reply); 162 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, 163 u32 *req, int replyBytes, u16 *u16reply, int maxwait, 164 int sleepFlag); 165 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); 166 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); 167 static void mpt_adapter_disable(MPT_ADAPTER *ioc); 168 static void mpt_adapter_dispose(MPT_ADAPTER *ioc); 169 170 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); 171 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); 172 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); 173 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 174 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); 175 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 176 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); 177 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); 178 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 179 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 180 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); 181 static int PrimeIocFifos(MPT_ADAPTER *ioc); 182 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 183 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 184 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 185 static int GetLanConfigPages(MPT_ADAPTER *ioc); 186 static int GetIoUnitPage2(MPT_ADAPTER *ioc); 187 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); 188 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); 189 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); 190 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); 191 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); 192 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); 193 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, 194 int sleepFlag); 195 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); 196 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); 197 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); 198 199 #ifdef CONFIG_PROC_FS 200 static int mpt_summary_proc_show(struct seq_file *m, void *v); 201 static int mpt_version_proc_show(struct seq_file *m, void *v); 202 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v); 203 #endif 204 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); 205 206 static int ProcessEventNotification(MPT_ADAPTER *ioc, 207 EventNotificationReply_t *evReply, int *evHandlers); 208 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); 209 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); 210 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); 211 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); 212 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); 213 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); 214 215 /* module entry point */ 216 static int __init fusion_init (void); 217 static void __exit fusion_exit (void); 218 219 #define CHIPREG_READ32(addr) readl_relaxed(addr) 220 #define CHIPREG_READ32_dmasync(addr) readl(addr) 221 #define CHIPREG_WRITE32(addr,val) writel(val, addr) 222 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) 223 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) 224 225 static void 226 pci_disable_io_access(struct pci_dev *pdev) 227 { 228 u16 command_reg; 229 230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 231 command_reg &= ~1; 232 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 233 } 234 235 static void 236 pci_enable_io_access(struct pci_dev *pdev) 237 { 238 u16 command_reg; 239 240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 241 command_reg |= 1; 242 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 243 } 244 245 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp) 246 { 247 int ret = param_set_int(val, kp); 248 MPT_ADAPTER *ioc; 249 250 if (ret) 251 return ret; 252 253 list_for_each_entry(ioc, &ioc_list, list) 254 ioc->debug_level = mpt_debug_level; 255 return 0; 256 } 257 258 /** 259 * mpt_get_cb_idx - obtain cb_idx for registered driver 260 * @dclass: class driver enum 261 * 262 * Returns cb_idx, or zero means it wasn't found 263 **/ 264 static u8 265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) 266 { 267 u8 cb_idx; 268 269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) 270 if (MptDriverClass[cb_idx] == dclass) 271 return cb_idx; 272 return 0; 273 } 274 275 /** 276 * mpt_is_discovery_complete - determine if discovery has completed 277 * @ioc: per adatper instance 278 * 279 * Returns 1 when discovery completed, else zero. 280 */ 281 static int 282 mpt_is_discovery_complete(MPT_ADAPTER *ioc) 283 { 284 ConfigExtendedPageHeader_t hdr; 285 CONFIGPARMS cfg; 286 SasIOUnitPage0_t *buffer; 287 dma_addr_t dma_handle; 288 int rc = 0; 289 290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); 291 memset(&cfg, 0, sizeof(CONFIGPARMS)); 292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; 293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 295 cfg.cfghdr.ehdr = &hdr; 296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 297 298 if ((mpt_config(ioc, &cfg))) 299 goto out; 300 if (!hdr.ExtPageLength) 301 goto out; 302 303 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, 304 &dma_handle, GFP_KERNEL); 305 if (!buffer) 306 goto out; 307 308 cfg.physAddr = dma_handle; 309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 310 311 if ((mpt_config(ioc, &cfg))) 312 goto out_free_consistent; 313 314 if (!(buffer->PhyData[0].PortFlags & 315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) 316 rc = 1; 317 318 out_free_consistent: 319 dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, 320 dma_handle); 321 out: 322 return rc; 323 } 324 325 326 /** 327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc 328 * @arg: input argument, used to derive ioc 329 * 330 * Return 0 if controller is removed from pci subsystem. 331 * Return -1 for other case. 332 */ 333 static int mpt_remove_dead_ioc_func(void *arg) 334 { 335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; 336 struct pci_dev *pdev; 337 338 if (!ioc) 339 return -1; 340 341 pdev = ioc->pcidev; 342 if (!pdev) 343 return -1; 344 345 pci_stop_and_remove_bus_device_locked(pdev); 346 return 0; 347 } 348 349 350 351 /** 352 * mpt_fault_reset_work - work performed on workq after ioc fault 353 * @work: input argument, used to derive ioc 354 * 355 **/ 356 static void 357 mpt_fault_reset_work(struct work_struct *work) 358 { 359 MPT_ADAPTER *ioc = 360 container_of(work, MPT_ADAPTER, fault_reset_work.work); 361 u32 ioc_raw_state; 362 int rc; 363 unsigned long flags; 364 MPT_SCSI_HOST *hd; 365 struct task_struct *p; 366 367 if (ioc->ioc_reset_in_progress || !ioc->active) 368 goto out; 369 370 371 ioc_raw_state = mpt_GetIocState(ioc, 0); 372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { 373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", 374 ioc->name, __func__); 375 376 /* 377 * Call mptscsih_flush_pending_cmds callback so that we 378 * flush all pending commands back to OS. 379 * This call is required to aovid deadlock at block layer. 380 * Dead IOC will fail to do diag reset,and this call is safe 381 * since dead ioc will never return any command back from HW. 382 */ 383 hd = shost_priv(ioc->sh); 384 ioc->schedule_dead_ioc_flush_running_cmds(hd); 385 386 /*Remove the Dead Host */ 387 p = kthread_run(mpt_remove_dead_ioc_func, ioc, 388 "mpt_dead_ioc_%d", ioc->id); 389 if (IS_ERR(p)) { 390 printk(MYIOC_s_ERR_FMT 391 "%s: Running mpt_dead_ioc thread failed !\n", 392 ioc->name, __func__); 393 } else { 394 printk(MYIOC_s_WARN_FMT 395 "%s: Running mpt_dead_ioc thread success !\n", 396 ioc->name, __func__); 397 } 398 return; /* don't rearm timer */ 399 } 400 401 if ((ioc_raw_state & MPI_IOC_STATE_MASK) 402 == MPI_IOC_STATE_FAULT) { 403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", 404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 406 ioc->name, __func__); 407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP); 408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, 409 __func__, (rc == 0) ? "success" : "failed"); 410 ioc_raw_state = mpt_GetIocState(ioc, 0); 411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) 412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " 413 "reset (%04xh)\n", ioc->name, ioc_raw_state & 414 MPI_DOORBELL_DATA_MASK); 415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { 416 if ((mpt_is_discovery_complete(ioc))) { 417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " 418 "discovery_quiesce_io flag\n", ioc->name)); 419 ioc->sas_discovery_quiesce_io = 0; 420 } 421 } 422 423 out: 424 /* 425 * Take turns polling alternate controller 426 */ 427 if (ioc->alt_ioc) 428 ioc = ioc->alt_ioc; 429 430 /* rearm the timer */ 431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 432 if (ioc->reset_work_q) 433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 434 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 436 } 437 438 439 /* 440 * Process turbo (context) reply... 441 */ 442 static void 443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) 444 { 445 MPT_FRAME_HDR *mf = NULL; 446 MPT_FRAME_HDR *mr = NULL; 447 u16 req_idx = 0; 448 u8 cb_idx; 449 450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", 451 ioc->name, pa)); 452 453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { 454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: 455 req_idx = pa & 0x0000FFFF; 456 cb_idx = (pa & 0x00FF0000) >> 16; 457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 458 break; 459 case MPI_CONTEXT_REPLY_TYPE_LAN: 460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); 461 /* 462 * Blind set of mf to NULL here was fatal 463 * after lan_reply says "freeme" 464 * Fix sort of combined with an optimization here; 465 * added explicit check for case where lan_reply 466 * was just returning 1 and doing nothing else. 467 * For this case skip the callback, but set up 468 * proper mf value first here:-) 469 */ 470 if ((pa & 0x58000000) == 0x58000000) { 471 req_idx = pa & 0x0000FFFF; 472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 473 mpt_free_msg_frame(ioc, mf); 474 mb(); 475 return; 476 } 477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 478 break; 479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: 480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); 481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 482 break; 483 default: 484 cb_idx = 0; 485 BUG(); 486 } 487 488 /* Check for (valid) IO callback! */ 489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 490 MptCallbacks[cb_idx] == NULL) { 491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 492 __func__, ioc->name, cb_idx); 493 goto out; 494 } 495 496 if (MptCallbacks[cb_idx](ioc, mf, mr)) 497 mpt_free_msg_frame(ioc, mf); 498 out: 499 mb(); 500 } 501 502 static void 503 mpt_reply(MPT_ADAPTER *ioc, u32 pa) 504 { 505 MPT_FRAME_HDR *mf; 506 MPT_FRAME_HDR *mr; 507 u16 req_idx; 508 u8 cb_idx; 509 int freeme; 510 511 u32 reply_dma_low; 512 u16 ioc_stat; 513 514 /* non-TURBO reply! Hmmm, something may be up... 515 * Newest turbo reply mechanism; get address 516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! 517 */ 518 519 /* Map DMA address of reply header to cpu address. 520 * pa is 32 bits - but the dma address may be 32 or 64 bits 521 * get offset based only only the low addresses 522 */ 523 524 reply_dma_low = (pa <<= 1); 525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + 526 (reply_dma_low - ioc->reply_frames_low_dma)); 527 528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); 529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; 530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 531 532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", 533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); 534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); 535 536 /* Check/log IOC log info 537 */ 538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); 539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { 540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); 541 if (ioc->bus_type == FC) 542 mpt_fc_log_info(ioc, log_info); 543 else if (ioc->bus_type == SPI) 544 mpt_spi_log_info(ioc, log_info); 545 else if (ioc->bus_type == SAS) 546 mpt_sas_log_info(ioc, log_info, cb_idx); 547 } 548 549 if (ioc_stat & MPI_IOCSTATUS_MASK) 550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); 551 552 /* Check for (valid) IO callback! */ 553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 554 MptCallbacks[cb_idx] == NULL) { 555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 556 __func__, ioc->name, cb_idx); 557 freeme = 0; 558 goto out; 559 } 560 561 freeme = MptCallbacks[cb_idx](ioc, mf, mr); 562 563 out: 564 /* Flush (non-TURBO) reply with a WRITE! */ 565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); 566 567 if (freeme) 568 mpt_free_msg_frame(ioc, mf); 569 mb(); 570 } 571 572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 573 /** 574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. 575 * @irq: irq number (not used) 576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure 577 * 578 * This routine is registered via the request_irq() kernel API call, 579 * and handles all interrupts generated from a specific MPT adapter 580 * (also referred to as a IO Controller or IOC). 581 * This routine must clear the interrupt from the adapter and does 582 * so by reading the reply FIFO. Multiple replies may be processed 583 * per single call to this routine. 584 * 585 * This routine handles register-level access of the adapter but 586 * dispatches (calls) a protocol-specific callback routine to handle 587 * the protocol-specific details of the MPT request completion. 588 */ 589 static irqreturn_t 590 mpt_interrupt(int irq, void *bus_id) 591 { 592 MPT_ADAPTER *ioc = bus_id; 593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 594 595 if (pa == 0xFFFFFFFF) 596 return IRQ_NONE; 597 598 /* 599 * Drain the reply FIFO! 600 */ 601 do { 602 if (pa & MPI_ADDRESS_REPLY_A_BIT) 603 mpt_reply(ioc, pa); 604 else 605 mpt_turbo_reply(ioc, pa); 606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 607 } while (pa != 0xFFFFFFFF); 608 609 return IRQ_HANDLED; 610 } 611 612 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 613 /** 614 * mptbase_reply - MPT base driver's callback routine 615 * @ioc: Pointer to MPT_ADAPTER structure 616 * @req: Pointer to original MPT request frame 617 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 618 * 619 * MPT base driver's callback routine; all base driver 620 * "internal" request/reply processing is routed here. 621 * Currently used for EventNotification and EventAck handling. 622 * 623 * Returns 1 indicating original alloc'd request frame ptr 624 * should be freed, or 0 if it shouldn't. 625 */ 626 static int 627 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 628 { 629 EventNotificationReply_t *pEventReply; 630 u8 event; 631 int evHandlers; 632 int freereq = 1; 633 634 switch (reply->u.hdr.Function) { 635 case MPI_FUNCTION_EVENT_NOTIFICATION: 636 pEventReply = (EventNotificationReply_t *)reply; 637 evHandlers = 0; 638 ProcessEventNotification(ioc, pEventReply, &evHandlers); 639 event = le32_to_cpu(pEventReply->Event) & 0xFF; 640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) 641 freereq = 0; 642 if (event != MPI_EVENT_EVENT_CHANGE) 643 break; 644 fallthrough; 645 case MPI_FUNCTION_CONFIG: 646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 649 memcpy(ioc->mptbase_cmds.reply, reply, 650 min(MPT_DEFAULT_FRAME_SIZE, 651 4 * reply->u.reply.MsgLength)); 652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 654 complete(&ioc->mptbase_cmds.done); 655 } else 656 freereq = 0; 657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) 658 freereq = 1; 659 break; 660 case MPI_FUNCTION_EVENT_ACK: 661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 662 "EventAck reply received\n", ioc->name)); 663 break; 664 default: 665 printk(MYIOC_s_ERR_FMT 666 "Unexpected msg function (=%02Xh) reply received!\n", 667 ioc->name, reply->u.hdr.Function); 668 break; 669 } 670 671 /* 672 * Conditionally tell caller to free the original 673 * EventNotification/EventAck/unexpected request frame! 674 */ 675 return freereq; 676 } 677 678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 679 /** 680 * mpt_register - Register protocol-specific main callback handler. 681 * @cbfunc: callback function pointer 682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) 683 * @func_name: call function's name 684 * 685 * This routine is called by a protocol-specific driver (SCSI host, 686 * LAN, SCSI target) to register its reply callback routine. Each 687 * protocol-specific driver must do this before it will be able to 688 * use any IOC resources, such as obtaining request frames. 689 * 690 * NOTES: The SCSI protocol driver currently calls this routine thrice 691 * in order to register separate callbacks; one for "normal" SCSI IO; 692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests. 693 * 694 * Returns u8 valued "handle" in the range (and S.O.D. order) 695 * {N,...,7,6,5,...,1} if successful. 696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be 697 * considered an error by the caller. 698 */ 699 u8 700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) 701 { 702 u8 cb_idx; 703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; 704 705 /* 706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1} 707 * (slot/handle 0 is reserved!) 708 */ 709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 710 if (MptCallbacks[cb_idx] == NULL) { 711 MptCallbacks[cb_idx] = cbfunc; 712 MptDriverClass[cb_idx] = dclass; 713 MptEvHandlers[cb_idx] = NULL; 714 last_drv_idx = cb_idx; 715 strscpy(MptCallbacksName[cb_idx], func_name, 716 MPT_MAX_CALLBACKNAME_LEN+1); 717 break; 718 } 719 } 720 721 return last_drv_idx; 722 } 723 724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 725 /** 726 * mpt_deregister - Deregister a protocol drivers resources. 727 * @cb_idx: previously registered callback handle 728 * 729 * Each protocol-specific driver should call this routine when its 730 * module is unloaded. 731 */ 732 void 733 mpt_deregister(u8 cb_idx) 734 { 735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { 736 MptCallbacks[cb_idx] = NULL; 737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 738 MptEvHandlers[cb_idx] = NULL; 739 740 last_drv_idx++; 741 } 742 } 743 744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 745 /** 746 * mpt_event_register - Register protocol-specific event callback handler. 747 * @cb_idx: previously registered (via mpt_register) callback handle 748 * @ev_cbfunc: callback function 749 * 750 * This routine can be called by one or more protocol-specific drivers 751 * if/when they choose to be notified of MPT events. 752 * 753 * Returns 0 for success. 754 */ 755 int 756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) 757 { 758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 759 return -1; 760 761 MptEvHandlers[cb_idx] = ev_cbfunc; 762 return 0; 763 } 764 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 766 /** 767 * mpt_event_deregister - Deregister protocol-specific event callback handler 768 * @cb_idx: previously registered callback handle 769 * 770 * Each protocol-specific driver should call this routine 771 * when it does not (or can no longer) handle events, 772 * or when its module is unloaded. 773 */ 774 void 775 mpt_event_deregister(u8 cb_idx) 776 { 777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 778 return; 779 780 MptEvHandlers[cb_idx] = NULL; 781 } 782 783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 784 /** 785 * mpt_reset_register - Register protocol-specific IOC reset handler. 786 * @cb_idx: previously registered (via mpt_register) callback handle 787 * @reset_func: reset function 788 * 789 * This routine can be called by one or more protocol-specific drivers 790 * if/when they choose to be notified of IOC resets. 791 * 792 * Returns 0 for success. 793 */ 794 int 795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) 796 { 797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 798 return -1; 799 800 MptResetHandlers[cb_idx] = reset_func; 801 return 0; 802 } 803 804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 805 /** 806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. 807 * @cb_idx: previously registered callback handle 808 * 809 * Each protocol-specific driver should call this routine 810 * when it does not (or can no longer) handle IOC reset handling, 811 * or when its module is unloaded. 812 */ 813 void 814 mpt_reset_deregister(u8 cb_idx) 815 { 816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 817 return; 818 819 MptResetHandlers[cb_idx] = NULL; 820 } 821 822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 823 /** 824 * mpt_device_driver_register - Register device driver hooks 825 * @dd_cbfunc: driver callbacks struct 826 * @cb_idx: MPT protocol driver index 827 */ 828 int 829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) 830 { 831 MPT_ADAPTER *ioc; 832 833 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 834 return -EINVAL; 835 836 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; 837 838 /* call per pci device probe entry point */ 839 list_for_each_entry(ioc, &ioc_list, list) { 840 if (dd_cbfunc->probe) 841 dd_cbfunc->probe(ioc->pcidev); 842 } 843 844 return 0; 845 } 846 847 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 848 /** 849 * mpt_device_driver_deregister - DeRegister device driver hooks 850 * @cb_idx: MPT protocol driver index 851 */ 852 void 853 mpt_device_driver_deregister(u8 cb_idx) 854 { 855 struct mpt_pci_driver *dd_cbfunc; 856 MPT_ADAPTER *ioc; 857 858 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 859 return; 860 861 dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; 862 863 list_for_each_entry(ioc, &ioc_list, list) { 864 if (dd_cbfunc->remove) 865 dd_cbfunc->remove(ioc->pcidev); 866 } 867 868 MptDeviceDriverHandlers[cb_idx] = NULL; 869 } 870 871 872 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 873 /** 874 * mpt_get_msg_frame - Obtain an MPT request frame from the pool 875 * @cb_idx: Handle of registered MPT protocol driver 876 * @ioc: Pointer to MPT adapter structure 877 * 878 * Obtain an MPT request frame from the pool (of 1024) that are 879 * allocated per MPT adapter. 880 * 881 * Returns pointer to a MPT request frame or %NULL if none are available 882 * or IOC is not active. 883 */ 884 MPT_FRAME_HDR* 885 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) 886 { 887 MPT_FRAME_HDR *mf; 888 unsigned long flags; 889 u16 req_idx; /* Request index */ 890 891 /* validate handle and ioc identifier */ 892 893 #ifdef MFCNT 894 if (!ioc->active) 895 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " 896 "returning NULL!\n", ioc->name); 897 #endif 898 899 /* If interrupts are not attached, do not return a request frame */ 900 if (!ioc->active) 901 return NULL; 902 903 spin_lock_irqsave(&ioc->FreeQlock, flags); 904 if (!list_empty(&ioc->FreeQ)) { 905 int req_offset; 906 907 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, 908 u.frame.linkage.list); 909 list_del(&mf->u.frame.linkage.list); 910 mf->u.frame.linkage.arg1 = 0; 911 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 912 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 913 /* u16! */ 914 req_idx = req_offset / ioc->req_sz; 915 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 916 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 917 /* Default, will be changed if necessary in SG generation */ 918 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; 919 #ifdef MFCNT 920 ioc->mfcnt++; 921 #endif 922 } 923 else 924 mf = NULL; 925 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 926 927 #ifdef MFCNT 928 if (mf == NULL) 929 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " 930 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, 931 ioc->req_depth); 932 mfcounter++; 933 if (mfcounter == PRINT_MF_COUNT) 934 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, 935 ioc->mfcnt, ioc->req_depth); 936 #endif 937 938 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", 939 ioc->name, cb_idx, ioc->id, mf)); 940 return mf; 941 } 942 943 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 944 /** 945 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC 946 * @cb_idx: Handle of registered MPT protocol driver 947 * @ioc: Pointer to MPT adapter structure 948 * @mf: Pointer to MPT request frame 949 * 950 * This routine posts an MPT request frame to the request post FIFO of a 951 * specific MPT adapter. 952 */ 953 void 954 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 955 { 956 u32 mf_dma_addr; 957 int req_offset; 958 u16 req_idx; /* Request index */ 959 960 /* ensure values are reset properly! */ 961 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 962 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 963 /* u16! */ 964 req_idx = req_offset / ioc->req_sz; 965 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 966 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 967 968 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 969 970 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; 971 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " 972 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, 973 ioc->RequestNB[req_idx])); 974 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); 975 } 976 977 /** 978 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame 979 * @cb_idx: Handle of registered MPT protocol driver 980 * @ioc: Pointer to MPT adapter structure 981 * @mf: Pointer to MPT request frame 982 * 983 * Send a protocol-specific MPT request frame to an IOC using 984 * hi-priority request queue. 985 * 986 * This routine posts an MPT request frame to the request post FIFO of a 987 * specific MPT adapter. 988 **/ 989 void 990 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 991 { 992 u32 mf_dma_addr; 993 int req_offset; 994 u16 req_idx; /* Request index */ 995 996 /* ensure values are reset properly! */ 997 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 998 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 999 req_idx = req_offset / ioc->req_sz; 1000 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 1001 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 1002 1003 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 1004 1005 mf_dma_addr = (ioc->req_frames_low_dma + req_offset); 1006 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", 1007 ioc->name, mf_dma_addr, req_idx)); 1008 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); 1009 } 1010 1011 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1012 /** 1013 * mpt_free_msg_frame - Place MPT request frame back on FreeQ. 1014 * @ioc: Pointer to MPT adapter structure 1015 * @mf: Pointer to MPT request frame 1016 * 1017 * This routine places a MPT request frame back on the MPT adapter's 1018 * FreeQ. 1019 */ 1020 void 1021 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 1022 { 1023 unsigned long flags; 1024 1025 /* Put Request back on FreeQ! */ 1026 spin_lock_irqsave(&ioc->FreeQlock, flags); 1027 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) 1028 goto out; 1029 /* signature to know if this mf is freed */ 1030 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); 1031 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ); 1032 #ifdef MFCNT 1033 ioc->mfcnt--; 1034 #endif 1035 out: 1036 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1037 } 1038 1039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1040 /** 1041 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr. 1042 * @pAddr: virtual address for SGE 1043 * @flagslength: SGE flags and data transfer length 1044 * @dma_addr: Physical address 1045 * 1046 * This routine places a MPT request frame back on the MPT adapter's 1047 * FreeQ. 1048 */ 1049 static void 1050 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1051 { 1052 SGESimple32_t *pSge = (SGESimple32_t *) pAddr; 1053 pSge->FlagsLength = cpu_to_le32(flagslength); 1054 pSge->Address = cpu_to_le32(dma_addr); 1055 } 1056 1057 /** 1058 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. 1059 * @pAddr: virtual address for SGE 1060 * @flagslength: SGE flags and data transfer length 1061 * @dma_addr: Physical address 1062 * 1063 * This routine places a MPT request frame back on the MPT adapter's 1064 * FreeQ. 1065 **/ 1066 static void 1067 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1068 { 1069 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1070 pSge->Address.Low = cpu_to_le32 1071 (lower_32_bits(dma_addr)); 1072 pSge->Address.High = cpu_to_le32 1073 (upper_32_bits(dma_addr)); 1074 pSge->FlagsLength = cpu_to_le32 1075 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1076 } 1077 1078 /** 1079 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). 1080 * @pAddr: virtual address for SGE 1081 * @flagslength: SGE flags and data transfer length 1082 * @dma_addr: Physical address 1083 * 1084 * This routine places a MPT request frame back on the MPT adapter's 1085 * FreeQ. 1086 **/ 1087 static void 1088 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1089 { 1090 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1091 u32 tmp; 1092 1093 pSge->Address.Low = cpu_to_le32 1094 (lower_32_bits(dma_addr)); 1095 tmp = (u32)(upper_32_bits(dma_addr)); 1096 1097 /* 1098 * 1078 errata workaround for the 36GB limitation 1099 */ 1100 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { 1101 flagslength |= 1102 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); 1103 tmp |= (1<<31); 1104 if (mpt_debug_level & MPT_DEBUG_36GB_MEM) 1105 printk(KERN_DEBUG "1078 P0M2 addressing for " 1106 "addr = 0x%llx len = %d\n", 1107 (unsigned long long)dma_addr, 1108 MPI_SGE_LENGTH(flagslength)); 1109 } 1110 1111 pSge->Address.High = cpu_to_le32(tmp); 1112 pSge->FlagsLength = cpu_to_le32( 1113 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1114 } 1115 1116 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1117 /** 1118 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr. 1119 * @pAddr: virtual address for SGE 1120 * @next: nextChainOffset value (u32's) 1121 * @length: length of next SGL segment 1122 * @dma_addr: Physical address 1123 * 1124 */ 1125 static void 1126 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1127 { 1128 SGEChain32_t *pChain = (SGEChain32_t *) pAddr; 1129 1130 pChain->Length = cpu_to_le16(length); 1131 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; 1132 pChain->NextChainOffset = next; 1133 pChain->Address = cpu_to_le32(dma_addr); 1134 } 1135 1136 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1137 /** 1138 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. 1139 * @pAddr: virtual address for SGE 1140 * @next: nextChainOffset value (u32's) 1141 * @length: length of next SGL segment 1142 * @dma_addr: Physical address 1143 * 1144 */ 1145 static void 1146 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1147 { 1148 SGEChain64_t *pChain = (SGEChain64_t *) pAddr; 1149 u32 tmp = dma_addr & 0xFFFFFFFF; 1150 1151 pChain->Length = cpu_to_le16(length); 1152 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | 1153 MPI_SGE_FLAGS_64_BIT_ADDRESSING); 1154 1155 pChain->NextChainOffset = next; 1156 1157 pChain->Address.Low = cpu_to_le32(tmp); 1158 tmp = (u32)(upper_32_bits(dma_addr)); 1159 pChain->Address.High = cpu_to_le32(tmp); 1160 } 1161 1162 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1163 /** 1164 * mpt_send_handshake_request - Send MPT request via doorbell handshake method. 1165 * @cb_idx: Handle of registered MPT protocol driver 1166 * @ioc: Pointer to MPT adapter structure 1167 * @reqBytes: Size of the request in bytes 1168 * @req: Pointer to MPT request frame 1169 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 1170 * 1171 * This routine is used exclusively to send MptScsiTaskMgmt 1172 * requests since they are required to be sent via doorbell handshake. 1173 * 1174 * NOTE: It is the callers responsibility to byte-swap fields in the 1175 * request which are greater than 1 byte in size. 1176 * 1177 * Returns 0 for success, non-zero for failure. 1178 */ 1179 int 1180 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) 1181 { 1182 int r = 0; 1183 u8 *req_as_bytes; 1184 int ii; 1185 1186 /* State is known to be good upon entering 1187 * this function so issue the bus reset 1188 * request. 1189 */ 1190 1191 /* 1192 * Emulate what mpt_put_msg_frame() does /wrt to sanity 1193 * setting cb_idx/req_idx. But ONLY if this request 1194 * is in proper (pre-alloc'd) request buffer range... 1195 */ 1196 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); 1197 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { 1198 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; 1199 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); 1200 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1201 } 1202 1203 /* Make sure there are no doorbells */ 1204 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1205 1206 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1207 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 1208 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 1209 1210 /* Wait for IOC doorbell int */ 1211 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { 1212 return ii; 1213 } 1214 1215 /* Read doorbell and check for active bit */ 1216 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 1217 return -5; 1218 1219 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", 1220 ioc->name, ii)); 1221 1222 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1223 1224 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1225 return -2; 1226 } 1227 1228 /* Send request via doorbell handshake */ 1229 req_as_bytes = (u8 *) req; 1230 for (ii = 0; ii < reqBytes/4; ii++) { 1231 u32 word; 1232 1233 word = ((req_as_bytes[(ii*4) + 0] << 0) | 1234 (req_as_bytes[(ii*4) + 1] << 8) | 1235 (req_as_bytes[(ii*4) + 2] << 16) | 1236 (req_as_bytes[(ii*4) + 3] << 24)); 1237 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1239 r = -3; 1240 break; 1241 } 1242 } 1243 1244 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) 1245 r = 0; 1246 else 1247 r = -4; 1248 1249 /* Make sure there are no doorbells */ 1250 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1251 1252 return r; 1253 } 1254 1255 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1256 /** 1257 * mpt_host_page_access_control - control the IOC's Host Page Buffer access 1258 * @ioc: Pointer to MPT adapter structure 1259 * @access_control_value: define bits below 1260 * @sleepFlag: Specifies whether the process can sleep 1261 * 1262 * Provides mechanism for the host driver to control the IOC's 1263 * Host Page Buffer access. 1264 * 1265 * Access Control Value - bits[15:12] 1266 * 0h Reserved 1267 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } 1268 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } 1269 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } 1270 * 1271 * Returns 0 for success, non-zero for failure. 1272 */ 1273 1274 static int 1275 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) 1276 { 1277 /* return if in use */ 1278 if (CHIPREG_READ32(&ioc->chip->Doorbell) 1279 & MPI_DOORBELL_ACTIVE) 1280 return -1; 1281 1282 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1283 1284 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1285 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL 1286 <<MPI_DOORBELL_FUNCTION_SHIFT) | 1287 (access_control_value<<12))); 1288 1289 /* Wait for IOC to clear Doorbell Status bit */ 1290 if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0) 1291 return -2; 1292 else 1293 return 0; 1294 } 1295 1296 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1297 /** 1298 * mpt_host_page_alloc - allocate system memory for the fw 1299 * @ioc: Pointer to pointer to IOC adapter 1300 * @ioc_init: Pointer to ioc init config page 1301 * 1302 * If we already allocated memory in past, then resend the same pointer. 1303 * Returns 0 for success, non-zero for failure. 1304 */ 1305 static int 1306 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) 1307 { 1308 char *psge; 1309 int flags_length; 1310 u32 host_page_buffer_sz=0; 1311 1312 if(!ioc->HostPageBuffer) { 1313 1314 host_page_buffer_sz = 1315 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; 1316 1317 if(!host_page_buffer_sz) 1318 return 0; /* fw doesn't need any host buffers */ 1319 1320 /* spin till we get enough memory */ 1321 while (host_page_buffer_sz > 0) { 1322 ioc->HostPageBuffer = 1323 dma_alloc_coherent(&ioc->pcidev->dev, 1324 host_page_buffer_sz, 1325 &ioc->HostPageBuffer_dma, 1326 GFP_KERNEL); 1327 if (ioc->HostPageBuffer) { 1328 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1329 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", 1330 ioc->name, ioc->HostPageBuffer, 1331 (u32)ioc->HostPageBuffer_dma, 1332 host_page_buffer_sz)); 1333 ioc->alloc_total += host_page_buffer_sz; 1334 ioc->HostPageBuffer_sz = host_page_buffer_sz; 1335 break; 1336 } 1337 1338 host_page_buffer_sz -= (4*1024); 1339 } 1340 } 1341 1342 if(!ioc->HostPageBuffer) { 1343 printk(MYIOC_s_ERR_FMT 1344 "Failed to alloc memory for host_page_buffer!\n", 1345 ioc->name); 1346 return -999; 1347 } 1348 1349 psge = (char *)&ioc_init->HostPageBufferSGE; 1350 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 1351 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 1352 MPI_SGE_FLAGS_HOST_TO_IOC | 1353 MPI_SGE_FLAGS_END_OF_BUFFER; 1354 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; 1355 flags_length |= ioc->HostPageBuffer_sz; 1356 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); 1357 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; 1358 1359 return 0; 1360 } 1361 1362 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1363 /** 1364 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. 1365 * @iocid: IOC unique identifier (integer) 1366 * @iocpp: Pointer to pointer to IOC adapter 1367 * 1368 * Given a unique IOC identifier, set pointer to the associated MPT 1369 * adapter structure. 1370 * 1371 * Returns iocid and sets iocpp if iocid is found. 1372 * Returns -1 if iocid is not found. 1373 */ 1374 int 1375 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) 1376 { 1377 MPT_ADAPTER *ioc; 1378 1379 list_for_each_entry(ioc,&ioc_list,list) { 1380 if (ioc->id == iocid) { 1381 *iocpp =ioc; 1382 return iocid; 1383 } 1384 } 1385 1386 *iocpp = NULL; 1387 return -1; 1388 } 1389 1390 /** 1391 * mpt_get_product_name - returns product string 1392 * @vendor: pci vendor id 1393 * @device: pci device id 1394 * @revision: pci revision id 1395 * 1396 * Returns product string displayed when driver loads, 1397 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product 1398 * 1399 **/ 1400 static const char* 1401 mpt_get_product_name(u16 vendor, u16 device, u8 revision) 1402 { 1403 char *product_str = NULL; 1404 1405 if (vendor == PCI_VENDOR_ID_BROCADE) { 1406 switch (device) 1407 { 1408 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1409 switch (revision) 1410 { 1411 case 0x00: 1412 product_str = "BRE040 A0"; 1413 break; 1414 case 0x01: 1415 product_str = "BRE040 A1"; 1416 break; 1417 default: 1418 product_str = "BRE040"; 1419 break; 1420 } 1421 break; 1422 } 1423 goto out; 1424 } 1425 1426 switch (device) 1427 { 1428 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1429 product_str = "LSIFC909 B1"; 1430 break; 1431 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1432 product_str = "LSIFC919 B0"; 1433 break; 1434 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1435 product_str = "LSIFC929 B0"; 1436 break; 1437 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1438 if (revision < 0x80) 1439 product_str = "LSIFC919X A0"; 1440 else 1441 product_str = "LSIFC919XL A1"; 1442 break; 1443 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1444 if (revision < 0x80) 1445 product_str = "LSIFC929X A0"; 1446 else 1447 product_str = "LSIFC929XL A1"; 1448 break; 1449 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1450 product_str = "LSIFC939X A1"; 1451 break; 1452 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1453 product_str = "LSIFC949X A1"; 1454 break; 1455 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1456 switch (revision) 1457 { 1458 case 0x00: 1459 product_str = "LSIFC949E A0"; 1460 break; 1461 case 0x01: 1462 product_str = "LSIFC949E A1"; 1463 break; 1464 default: 1465 product_str = "LSIFC949E"; 1466 break; 1467 } 1468 break; 1469 case MPI_MANUFACTPAGE_DEVID_53C1030: 1470 switch (revision) 1471 { 1472 case 0x00: 1473 product_str = "LSI53C1030 A0"; 1474 break; 1475 case 0x01: 1476 product_str = "LSI53C1030 B0"; 1477 break; 1478 case 0x03: 1479 product_str = "LSI53C1030 B1"; 1480 break; 1481 case 0x07: 1482 product_str = "LSI53C1030 B2"; 1483 break; 1484 case 0x08: 1485 product_str = "LSI53C1030 C0"; 1486 break; 1487 case 0x80: 1488 product_str = "LSI53C1030T A0"; 1489 break; 1490 case 0x83: 1491 product_str = "LSI53C1030T A2"; 1492 break; 1493 case 0x87: 1494 product_str = "LSI53C1030T A3"; 1495 break; 1496 case 0xc1: 1497 product_str = "LSI53C1020A A1"; 1498 break; 1499 default: 1500 product_str = "LSI53C1030"; 1501 break; 1502 } 1503 break; 1504 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1505 switch (revision) 1506 { 1507 case 0x03: 1508 product_str = "LSI53C1035 A2"; 1509 break; 1510 case 0x04: 1511 product_str = "LSI53C1035 B0"; 1512 break; 1513 default: 1514 product_str = "LSI53C1035"; 1515 break; 1516 } 1517 break; 1518 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1519 switch (revision) 1520 { 1521 case 0x00: 1522 product_str = "LSISAS1064 A1"; 1523 break; 1524 case 0x01: 1525 product_str = "LSISAS1064 A2"; 1526 break; 1527 case 0x02: 1528 product_str = "LSISAS1064 A3"; 1529 break; 1530 case 0x03: 1531 product_str = "LSISAS1064 A4"; 1532 break; 1533 default: 1534 product_str = "LSISAS1064"; 1535 break; 1536 } 1537 break; 1538 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1539 switch (revision) 1540 { 1541 case 0x00: 1542 product_str = "LSISAS1064E A0"; 1543 break; 1544 case 0x01: 1545 product_str = "LSISAS1064E B0"; 1546 break; 1547 case 0x02: 1548 product_str = "LSISAS1064E B1"; 1549 break; 1550 case 0x04: 1551 product_str = "LSISAS1064E B2"; 1552 break; 1553 case 0x08: 1554 product_str = "LSISAS1064E B3"; 1555 break; 1556 default: 1557 product_str = "LSISAS1064E"; 1558 break; 1559 } 1560 break; 1561 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1562 switch (revision) 1563 { 1564 case 0x00: 1565 product_str = "LSISAS1068 A0"; 1566 break; 1567 case 0x01: 1568 product_str = "LSISAS1068 B0"; 1569 break; 1570 case 0x02: 1571 product_str = "LSISAS1068 B1"; 1572 break; 1573 default: 1574 product_str = "LSISAS1068"; 1575 break; 1576 } 1577 break; 1578 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1579 switch (revision) 1580 { 1581 case 0x00: 1582 product_str = "LSISAS1068E A0"; 1583 break; 1584 case 0x01: 1585 product_str = "LSISAS1068E B0"; 1586 break; 1587 case 0x02: 1588 product_str = "LSISAS1068E B1"; 1589 break; 1590 case 0x04: 1591 product_str = "LSISAS1068E B2"; 1592 break; 1593 case 0x08: 1594 product_str = "LSISAS1068E B3"; 1595 break; 1596 default: 1597 product_str = "LSISAS1068E"; 1598 break; 1599 } 1600 break; 1601 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1602 switch (revision) 1603 { 1604 case 0x00: 1605 product_str = "LSISAS1078 A0"; 1606 break; 1607 case 0x01: 1608 product_str = "LSISAS1078 B0"; 1609 break; 1610 case 0x02: 1611 product_str = "LSISAS1078 C0"; 1612 break; 1613 case 0x03: 1614 product_str = "LSISAS1078 C1"; 1615 break; 1616 case 0x04: 1617 product_str = "LSISAS1078 C2"; 1618 break; 1619 default: 1620 product_str = "LSISAS1078"; 1621 break; 1622 } 1623 break; 1624 } 1625 1626 out: 1627 return product_str; 1628 } 1629 1630 /** 1631 * mpt_mapresources - map in memory mapped io 1632 * @ioc: Pointer to pointer to IOC adapter 1633 * 1634 **/ 1635 static int 1636 mpt_mapresources(MPT_ADAPTER *ioc) 1637 { 1638 u8 __iomem *mem; 1639 int ii; 1640 resource_size_t mem_phys; 1641 unsigned long port; 1642 u32 msize; 1643 u32 psize; 1644 int r = -ENODEV; 1645 struct pci_dev *pdev; 1646 1647 pdev = ioc->pcidev; 1648 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); 1649 if (pci_enable_device_mem(pdev)) { 1650 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " 1651 "failed\n", ioc->name); 1652 return r; 1653 } 1654 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { 1655 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " 1656 "MEM failed\n", ioc->name); 1657 goto out_pci_disable_device; 1658 } 1659 1660 if (sizeof(dma_addr_t) > 4) { 1661 const uint64_t required_mask = dma_get_required_mask 1662 (&pdev->dev); 1663 if (required_mask > DMA_BIT_MASK(32) 1664 && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) 1665 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { 1666 ioc->dma_mask = DMA_BIT_MASK(64); 1667 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1668 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1669 ioc->name)); 1670 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) 1671 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { 1672 ioc->dma_mask = DMA_BIT_MASK(32); 1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1674 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1675 ioc->name)); 1676 } else { 1677 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1678 ioc->name, pci_name(pdev)); 1679 goto out_pci_release_region; 1680 } 1681 } else { 1682 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) 1683 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { 1684 ioc->dma_mask = DMA_BIT_MASK(32); 1685 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1686 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1687 ioc->name)); 1688 } else { 1689 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1690 ioc->name, pci_name(pdev)); 1691 goto out_pci_release_region; 1692 } 1693 } 1694 1695 mem_phys = msize = 0; 1696 port = psize = 0; 1697 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { 1698 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { 1699 if (psize) 1700 continue; 1701 /* Get I/O space! */ 1702 port = pci_resource_start(pdev, ii); 1703 psize = pci_resource_len(pdev, ii); 1704 } else { 1705 if (msize) 1706 continue; 1707 /* Get memmap */ 1708 mem_phys = pci_resource_start(pdev, ii); 1709 msize = pci_resource_len(pdev, ii); 1710 } 1711 } 1712 ioc->mem_size = msize; 1713 1714 mem = NULL; 1715 /* Get logical ptr for PciMem0 space */ 1716 /*mem = ioremap(mem_phys, msize);*/ 1717 mem = ioremap(mem_phys, msize); 1718 if (mem == NULL) { 1719 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" 1720 " memory!\n", ioc->name); 1721 r = -EINVAL; 1722 goto out_pci_release_region; 1723 } 1724 ioc->memmap = mem; 1725 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", 1726 ioc->name, mem, (unsigned long long)mem_phys)); 1727 1728 ioc->mem_phys = mem_phys; 1729 ioc->chip = (SYSIF_REGS __iomem *)mem; 1730 1731 /* Save Port IO values in case we need to do downloadboot */ 1732 ioc->pio_mem_phys = port; 1733 ioc->pio_chip = (SYSIF_REGS __iomem *)port; 1734 1735 return 0; 1736 1737 out_pci_release_region: 1738 pci_release_selected_regions(pdev, ioc->bars); 1739 out_pci_disable_device: 1740 pci_disable_device(pdev); 1741 return r; 1742 } 1743 1744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1745 /** 1746 * mpt_attach - Install a PCI intelligent MPT adapter. 1747 * @pdev: Pointer to pci_dev structure 1748 * @id: PCI device ID information 1749 * 1750 * This routine performs all the steps necessary to bring the IOC of 1751 * a MPT adapter to a OPERATIONAL state. This includes registering 1752 * memory regions, registering the interrupt, and allocating request 1753 * and reply memory pools. 1754 * 1755 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 1756 * MPT adapter. 1757 * 1758 * Returns 0 for success, non-zero for failure. 1759 * 1760 * TODO: Add support for polled controllers 1761 */ 1762 int 1763 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) 1764 { 1765 MPT_ADAPTER *ioc; 1766 u8 cb_idx; 1767 int r = -ENODEV; 1768 u8 pcixcmd; 1769 static int mpt_ids = 0; 1770 #ifdef CONFIG_PROC_FS 1771 struct proc_dir_entry *dent; 1772 #endif 1773 1774 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL); 1775 if (ioc == NULL) { 1776 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); 1777 return -ENOMEM; 1778 } 1779 1780 ioc->id = mpt_ids++; 1781 sprintf(ioc->name, "ioc%d", ioc->id); 1782 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); 1783 1784 /* 1785 * set initial debug level 1786 * (refer to mptdebug.h) 1787 * 1788 */ 1789 ioc->debug_level = mpt_debug_level; 1790 if (mpt_debug_level) 1791 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); 1792 1793 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); 1794 1795 ioc->pcidev = pdev; 1796 if (mpt_mapresources(ioc)) { 1797 goto out_free_ioc; 1798 } 1799 1800 /* 1801 * Setting up proper handlers for scatter gather handling 1802 */ 1803 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 1804 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 1805 ioc->add_sge = &mpt_add_sge_64bit_1078; 1806 else 1807 ioc->add_sge = &mpt_add_sge_64bit; 1808 ioc->add_chain = &mpt_add_chain_64bit; 1809 ioc->sg_addr_size = 8; 1810 } else { 1811 ioc->add_sge = &mpt_add_sge; 1812 ioc->add_chain = &mpt_add_chain; 1813 ioc->sg_addr_size = 4; 1814 } 1815 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 1816 1817 ioc->alloc_total = sizeof(MPT_ADAPTER); 1818 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ 1819 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 1820 1821 1822 spin_lock_init(&ioc->taskmgmt_lock); 1823 mutex_init(&ioc->internal_cmds.mutex); 1824 init_completion(&ioc->internal_cmds.done); 1825 mutex_init(&ioc->mptbase_cmds.mutex); 1826 init_completion(&ioc->mptbase_cmds.done); 1827 mutex_init(&ioc->taskmgmt_cmds.mutex); 1828 init_completion(&ioc->taskmgmt_cmds.done); 1829 1830 /* Initialize the event logging. 1831 */ 1832 ioc->eventTypes = 0; /* None */ 1833 ioc->eventContext = 0; 1834 ioc->eventLogSize = 0; 1835 ioc->events = NULL; 1836 1837 #ifdef MFCNT 1838 ioc->mfcnt = 0; 1839 #endif 1840 1841 ioc->sh = NULL; 1842 ioc->cached_fw = NULL; 1843 1844 /* Initialize SCSI Config Data structure 1845 */ 1846 memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); 1847 1848 /* Initialize the fc rport list head. 1849 */ 1850 INIT_LIST_HEAD(&ioc->fc_rports); 1851 1852 /* Find lookup slot. */ 1853 INIT_LIST_HEAD(&ioc->list); 1854 1855 1856 /* Initialize workqueue */ 1857 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); 1858 1859 ioc->reset_work_q = 1860 alloc_workqueue("mpt_poll_%d", WQ_MEM_RECLAIM, 0, ioc->id); 1861 if (!ioc->reset_work_q) { 1862 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1863 ioc->name); 1864 r = -ENOMEM; 1865 goto out_unmap_resources; 1866 } 1867 1868 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", 1869 ioc->name, &ioc->facts, &ioc->pfacts[0])); 1870 1871 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device, 1872 pdev->revision); 1873 1874 switch (pdev->device) 1875 { 1876 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1877 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1878 ioc->errata_flag_1064 = 1; 1879 fallthrough; 1880 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1881 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1882 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1883 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1884 ioc->bus_type = FC; 1885 break; 1886 1887 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1888 if (pdev->revision < XL_929) { 1889 /* 929X Chip Fix. Set Split transactions level 1890 * for PCIX. Set MOST bits to zero. 1891 */ 1892 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1893 pcixcmd &= 0x8F; 1894 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1895 } else { 1896 /* 929XL Chip Fix. Set MMRBC to 0x08. 1897 */ 1898 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1899 pcixcmd |= 0x08; 1900 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1901 } 1902 ioc->bus_type = FC; 1903 break; 1904 1905 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1906 /* 919X Chip Fix. Set Split transactions level 1907 * for PCIX. Set MOST bits to zero. 1908 */ 1909 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1910 pcixcmd &= 0x8F; 1911 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1912 ioc->bus_type = FC; 1913 break; 1914 1915 case MPI_MANUFACTPAGE_DEVID_53C1030: 1916 /* 1030 Chip Fix. Disable Split transactions 1917 * for PCIX. Set MOST bits to zero if Rev < C0( = 8). 1918 */ 1919 if (pdev->revision < C0_1030) { 1920 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1921 pcixcmd &= 0x8F; 1922 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1923 } 1924 fallthrough; 1925 1926 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1927 ioc->bus_type = SPI; 1928 break; 1929 1930 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1931 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1932 ioc->errata_flag_1064 = 1; 1933 ioc->bus_type = SAS; 1934 break; 1935 1936 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1937 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1938 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1939 ioc->bus_type = SAS; 1940 break; 1941 } 1942 1943 1944 switch (ioc->bus_type) { 1945 1946 case SAS: 1947 ioc->msi_enable = mpt_msi_enable_sas; 1948 break; 1949 1950 case SPI: 1951 ioc->msi_enable = mpt_msi_enable_spi; 1952 break; 1953 1954 case FC: 1955 ioc->msi_enable = mpt_msi_enable_fc; 1956 break; 1957 1958 default: 1959 ioc->msi_enable = 0; 1960 break; 1961 } 1962 1963 ioc->fw_events_off = 1; 1964 1965 if (ioc->errata_flag_1064) 1966 pci_disable_io_access(pdev); 1967 1968 spin_lock_init(&ioc->FreeQlock); 1969 1970 /* Disable all! */ 1971 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 1972 ioc->active = 0; 1973 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1974 1975 /* Set IOC ptr in the pcidev's driver data. */ 1976 pci_set_drvdata(ioc->pcidev, ioc); 1977 1978 /* Set lookup ptr. */ 1979 list_add_tail(&ioc->list, &ioc_list); 1980 1981 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. 1982 */ 1983 mpt_detect_bound_ports(ioc, pdev); 1984 1985 INIT_LIST_HEAD(&ioc->fw_event_list); 1986 spin_lock_init(&ioc->fw_event_lock); 1987 ioc->fw_event_q = alloc_workqueue("mpt/%d", WQ_MEM_RECLAIM, 0, ioc->id); 1988 if (!ioc->fw_event_q) { 1989 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1990 ioc->name); 1991 r = -ENOMEM; 1992 goto out_remove_ioc; 1993 } 1994 1995 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 1996 CAN_SLEEP)) != 0){ 1997 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", 1998 ioc->name, r); 1999 2000 destroy_workqueue(ioc->fw_event_q); 2001 ioc->fw_event_q = NULL; 2002 2003 list_del(&ioc->list); 2004 if (ioc->alt_ioc) 2005 ioc->alt_ioc->alt_ioc = NULL; 2006 iounmap(ioc->memmap); 2007 if (pci_is_enabled(pdev)) 2008 pci_disable_device(pdev); 2009 if (r != -5) 2010 pci_release_selected_regions(pdev, ioc->bars); 2011 2012 destroy_workqueue(ioc->reset_work_q); 2013 ioc->reset_work_q = NULL; 2014 2015 kfree(ioc); 2016 return r; 2017 } 2018 2019 /* call per device driver probe entry point */ 2020 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2021 if(MptDeviceDriverHandlers[cb_idx] && 2022 MptDeviceDriverHandlers[cb_idx]->probe) { 2023 MptDeviceDriverHandlers[cb_idx]->probe(pdev); 2024 } 2025 } 2026 2027 #ifdef CONFIG_PROC_FS 2028 /* 2029 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. 2030 */ 2031 dent = proc_mkdir(ioc->name, mpt_proc_root_dir); 2032 if (dent) { 2033 proc_create_single_data("info", S_IRUGO, dent, 2034 mpt_iocinfo_proc_show, ioc); 2035 proc_create_single_data("summary", S_IRUGO, dent, 2036 mpt_summary_proc_show, ioc); 2037 } 2038 #endif 2039 2040 if (!ioc->alt_ioc) 2041 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 2042 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 2043 2044 return 0; 2045 2046 out_remove_ioc: 2047 list_del(&ioc->list); 2048 if (ioc->alt_ioc) 2049 ioc->alt_ioc->alt_ioc = NULL; 2050 2051 destroy_workqueue(ioc->reset_work_q); 2052 ioc->reset_work_q = NULL; 2053 2054 out_unmap_resources: 2055 iounmap(ioc->memmap); 2056 pci_disable_device(pdev); 2057 pci_release_selected_regions(pdev, ioc->bars); 2058 2059 out_free_ioc: 2060 kfree(ioc); 2061 2062 return r; 2063 } 2064 2065 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2066 /** 2067 * mpt_detach - Remove a PCI intelligent MPT adapter. 2068 * @pdev: Pointer to pci_dev structure 2069 */ 2070 2071 void 2072 mpt_detach(struct pci_dev *pdev) 2073 { 2074 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2075 char pname[64]; 2076 u8 cb_idx; 2077 unsigned long flags; 2078 struct workqueue_struct *wq; 2079 2080 /* 2081 * Stop polling ioc for fault condition 2082 */ 2083 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2084 wq = ioc->reset_work_q; 2085 ioc->reset_work_q = NULL; 2086 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2087 cancel_delayed_work(&ioc->fault_reset_work); 2088 destroy_workqueue(wq); 2089 2090 spin_lock_irqsave(&ioc->fw_event_lock, flags); 2091 wq = ioc->fw_event_q; 2092 ioc->fw_event_q = NULL; 2093 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 2094 destroy_workqueue(wq); 2095 2096 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); 2097 remove_proc_entry(pname, NULL); 2098 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); 2099 remove_proc_entry(pname, NULL); 2100 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); 2101 remove_proc_entry(pname, NULL); 2102 2103 /* call per device driver remove entry point */ 2104 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2105 if(MptDeviceDriverHandlers[cb_idx] && 2106 MptDeviceDriverHandlers[cb_idx]->remove) { 2107 MptDeviceDriverHandlers[cb_idx]->remove(pdev); 2108 } 2109 } 2110 2111 /* Disable interrupts! */ 2112 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2113 2114 ioc->active = 0; 2115 synchronize_irq(pdev->irq); 2116 2117 /* Clear any lingering interrupt */ 2118 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2119 2120 CHIPREG_READ32(&ioc->chip->IntStatus); 2121 2122 mpt_adapter_dispose(ioc); 2123 2124 } 2125 2126 /************************************************************************** 2127 * Power Management 2128 */ 2129 #ifdef CONFIG_PM 2130 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2131 /** 2132 * mpt_suspend - Fusion MPT base driver suspend routine. 2133 * @pdev: Pointer to pci_dev structure 2134 * @state: new state to enter 2135 */ 2136 int 2137 mpt_suspend(struct pci_dev *pdev, pm_message_t state) 2138 { 2139 u32 device_state; 2140 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2141 2142 device_state = pci_choose_state(pdev, state); 2143 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " 2144 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2145 device_state); 2146 2147 /* put ioc into READY_STATE */ 2148 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { 2149 printk(MYIOC_s_ERR_FMT 2150 "pci-suspend: IOC msg unit reset failed!\n", ioc->name); 2151 } 2152 2153 /* disable interrupts */ 2154 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2155 ioc->active = 0; 2156 2157 /* Clear any lingering interrupt */ 2158 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2159 2160 free_irq(ioc->pci_irq, ioc); 2161 if (ioc->msi_enable) 2162 pci_disable_msi(ioc->pcidev); 2163 ioc->pci_irq = -1; 2164 pci_save_state(pdev); 2165 pci_disable_device(pdev); 2166 pci_release_selected_regions(pdev, ioc->bars); 2167 pci_set_power_state(pdev, device_state); 2168 return 0; 2169 } 2170 2171 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2172 /** 2173 * mpt_resume - Fusion MPT base driver resume routine. 2174 * @pdev: Pointer to pci_dev structure 2175 */ 2176 int 2177 mpt_resume(struct pci_dev *pdev) 2178 { 2179 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2180 u32 device_state = pdev->current_state; 2181 int recovery_state; 2182 int err; 2183 2184 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " 2185 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2186 device_state); 2187 2188 pci_set_power_state(pdev, PCI_D0); 2189 pci_enable_wake(pdev, PCI_D0, 0); 2190 pci_restore_state(pdev); 2191 ioc->pcidev = pdev; 2192 err = mpt_mapresources(ioc); 2193 if (err) 2194 return err; 2195 2196 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 2197 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 2198 ioc->add_sge = &mpt_add_sge_64bit_1078; 2199 else 2200 ioc->add_sge = &mpt_add_sge_64bit; 2201 ioc->add_chain = &mpt_add_chain_64bit; 2202 ioc->sg_addr_size = 8; 2203 } else { 2204 2205 ioc->add_sge = &mpt_add_sge; 2206 ioc->add_chain = &mpt_add_chain; 2207 ioc->sg_addr_size = 4; 2208 } 2209 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 2210 2211 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", 2212 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), 2213 CHIPREG_READ32(&ioc->chip->Doorbell)); 2214 2215 /* 2216 * Errata workaround for SAS pci express: 2217 * Upon returning to the D0 state, the contents of the doorbell will be 2218 * stale data, and this will incorrectly signal to the host driver that 2219 * the firmware is ready to process mpt commands. The workaround is 2220 * to issue a diagnostic reset. 2221 */ 2222 if (ioc->bus_type == SAS && (pdev->device == 2223 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == 2224 MPI_MANUFACTPAGE_DEVID_SAS1064E)) { 2225 if (KickStart(ioc, 1, CAN_SLEEP) < 0) { 2226 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", 2227 ioc->name); 2228 goto out; 2229 } 2230 } 2231 2232 /* bring ioc to operational state */ 2233 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); 2234 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2235 CAN_SLEEP); 2236 if (recovery_state != 0) 2237 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " 2238 "error:[%x]\n", ioc->name, recovery_state); 2239 else 2240 printk(MYIOC_s_INFO_FMT 2241 "pci-resume: success\n", ioc->name); 2242 out: 2243 return 0; 2244 2245 } 2246 #endif 2247 2248 static int 2249 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) 2250 { 2251 if ((MptDriverClass[index] == MPTSPI_DRIVER && 2252 ioc->bus_type != SPI) || 2253 (MptDriverClass[index] == MPTFC_DRIVER && 2254 ioc->bus_type != FC) || 2255 (MptDriverClass[index] == MPTSAS_DRIVER && 2256 ioc->bus_type != SAS)) 2257 /* make sure we only call the relevant reset handler 2258 * for the bus */ 2259 return 0; 2260 return (MptResetHandlers[index])(ioc, reset_phase); 2261 } 2262 2263 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2264 /** 2265 * mpt_do_ioc_recovery - Initialize or recover MPT adapter. 2266 * @ioc: Pointer to MPT adapter structure 2267 * @reason: Event word / reason 2268 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 2269 * 2270 * This routine performs all the steps necessary to bring the IOC 2271 * to a OPERATIONAL state. 2272 * 2273 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 2274 * MPT adapter. 2275 * 2276 * Returns: 2277 * 0 for success 2278 * -1 if failed to get board READY 2279 * -2 if READY but IOCFacts Failed 2280 * -3 if READY but PrimeIOCFifos Failed 2281 * -4 if READY but IOCInit Failed 2282 * -5 if failed to enable_device and/or request_selected_regions 2283 * -6 if failed to upload firmware 2284 */ 2285 static int 2286 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) 2287 { 2288 int hard_reset_done = 0; 2289 int alt_ioc_ready = 0; 2290 int hard; 2291 int rc=0; 2292 int ii; 2293 int ret = 0; 2294 int reset_alt_ioc_active = 0; 2295 int irq_allocated = 0; 2296 u8 *a; 2297 2298 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, 2299 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); 2300 2301 /* Disable reply interrupts (also blocks FreeQ) */ 2302 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2303 ioc->active = 0; 2304 2305 if (ioc->alt_ioc) { 2306 if (ioc->alt_ioc->active || 2307 reason == MPT_HOSTEVENT_IOC_RECOVER) { 2308 reset_alt_ioc_active = 1; 2309 /* Disable alt-IOC's reply interrupts 2310 * (and FreeQ) for a bit 2311 **/ 2312 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2313 0xFFFFFFFF); 2314 ioc->alt_ioc->active = 0; 2315 } 2316 } 2317 2318 hard = 1; 2319 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) 2320 hard = 0; 2321 2322 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { 2323 if (hard_reset_done == -4) { 2324 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", 2325 ioc->name); 2326 2327 if (reset_alt_ioc_active && ioc->alt_ioc) { 2328 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ 2329 dprintk(ioc, printk(MYIOC_s_INFO_FMT 2330 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); 2331 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); 2332 ioc->alt_ioc->active = 1; 2333 } 2334 2335 } else { 2336 printk(MYIOC_s_WARN_FMT 2337 "NOT READY WARNING!\n", ioc->name); 2338 } 2339 ret = -1; 2340 goto out; 2341 } 2342 2343 /* hard_reset_done = 0 if a soft reset was performed 2344 * and 1 if a hard reset was performed. 2345 */ 2346 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { 2347 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) 2348 alt_ioc_ready = 1; 2349 else 2350 printk(MYIOC_s_WARN_FMT 2351 ": alt-ioc Not ready WARNING!\n", 2352 ioc->alt_ioc->name); 2353 } 2354 2355 for (ii=0; ii<5; ii++) { 2356 /* Get IOC facts! Allow 5 retries */ 2357 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) 2358 break; 2359 } 2360 2361 2362 if (ii == 5) { 2363 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2364 "Retry IocFacts failed rc=%x\n", ioc->name, rc)); 2365 ret = -2; 2366 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2367 MptDisplayIocCapabilities(ioc); 2368 } 2369 2370 if (alt_ioc_ready) { 2371 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { 2372 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2373 "Initial Alt IocFacts failed rc=%x\n", 2374 ioc->name, rc)); 2375 /* Retry - alt IOC was initialized once 2376 */ 2377 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); 2378 } 2379 if (rc) { 2380 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2381 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); 2382 alt_ioc_ready = 0; 2383 reset_alt_ioc_active = 0; 2384 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2385 MptDisplayIocCapabilities(ioc->alt_ioc); 2386 } 2387 } 2388 2389 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && 2390 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { 2391 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2392 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | 2393 IORESOURCE_IO); 2394 if (pci_enable_device(ioc->pcidev)) 2395 return -5; 2396 if (pci_request_selected_regions(ioc->pcidev, ioc->bars, 2397 "mpt")) 2398 return -5; 2399 } 2400 2401 /* 2402 * Device is reset now. It must have de-asserted the interrupt line 2403 * (if it was asserted) and it should be safe to register for the 2404 * interrupt now. 2405 */ 2406 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2407 ioc->pci_irq = -1; 2408 if (ioc->pcidev->irq) { 2409 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) 2410 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", 2411 ioc->name); 2412 else 2413 ioc->msi_enable = 0; 2414 rc = request_irq(ioc->pcidev->irq, mpt_interrupt, 2415 IRQF_SHARED, ioc->name, ioc); 2416 if (rc < 0) { 2417 printk(MYIOC_s_ERR_FMT "Unable to allocate " 2418 "interrupt %d!\n", 2419 ioc->name, ioc->pcidev->irq); 2420 if (ioc->msi_enable) 2421 pci_disable_msi(ioc->pcidev); 2422 ret = -EBUSY; 2423 goto out; 2424 } 2425 irq_allocated = 1; 2426 ioc->pci_irq = ioc->pcidev->irq; 2427 pci_set_master(ioc->pcidev); /* ?? */ 2428 pci_set_drvdata(ioc->pcidev, ioc); 2429 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2430 "installed at interrupt %d\n", ioc->name, 2431 ioc->pcidev->irq)); 2432 } 2433 } 2434 2435 /* Prime reply & request queues! 2436 * (mucho alloc's) Must be done prior to 2437 * init as upper addresses are needed for init. 2438 * If fails, continue with alt-ioc processing 2439 */ 2440 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", 2441 ioc->name)); 2442 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) 2443 ret = -3; 2444 2445 /* May need to check/upload firmware & data here! 2446 * If fails, continue with alt-ioc processing 2447 */ 2448 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", 2449 ioc->name)); 2450 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) 2451 ret = -4; 2452 // NEW! 2453 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { 2454 printk(MYIOC_s_WARN_FMT 2455 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", 2456 ioc->alt_ioc->name, rc); 2457 alt_ioc_ready = 0; 2458 reset_alt_ioc_active = 0; 2459 } 2460 2461 if (alt_ioc_ready) { 2462 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { 2463 alt_ioc_ready = 0; 2464 reset_alt_ioc_active = 0; 2465 printk(MYIOC_s_WARN_FMT 2466 ": alt-ioc: (%d) init failure WARNING!\n", 2467 ioc->alt_ioc->name, rc); 2468 } 2469 } 2470 2471 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ 2472 if (ioc->upload_fw) { 2473 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2474 "firmware upload required!\n", ioc->name)); 2475 2476 /* Controller is not operational, cannot do upload 2477 */ 2478 if (ret == 0) { 2479 rc = mpt_do_upload(ioc, sleepFlag); 2480 if (rc == 0) { 2481 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 2482 /* 2483 * Maintain only one pointer to FW memory 2484 * so there will not be two attempt to 2485 * downloadboot onboard dual function 2486 * chips (mpt_adapter_disable, 2487 * mpt_diag_reset) 2488 */ 2489 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2490 "mpt_upload: alt_%s has cached_fw=%p \n", 2491 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); 2492 ioc->cached_fw = NULL; 2493 } 2494 } else { 2495 printk(MYIOC_s_WARN_FMT 2496 "firmware upload failure!\n", ioc->name); 2497 ret = -6; 2498 } 2499 } 2500 } 2501 } 2502 2503 /* Enable MPT base driver management of EventNotification 2504 * and EventAck handling. 2505 */ 2506 if ((ret == 0) && (!ioc->facts.EventState)) { 2507 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2508 "SendEventNotification\n", 2509 ioc->name)); 2510 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ 2511 } 2512 2513 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) 2514 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); 2515 2516 if (ret == 0) { 2517 /* Enable! (reply interrupt) */ 2518 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 2519 ioc->active = 1; 2520 } 2521 if (rc == 0) { /* alt ioc */ 2522 if (reset_alt_ioc_active && ioc->alt_ioc) { 2523 /* (re)Enable alt-IOC! (reply interrupt) */ 2524 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" 2525 "reply irq re-enabled\n", 2526 ioc->alt_ioc->name)); 2527 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2528 MPI_HIM_DIM); 2529 ioc->alt_ioc->active = 1; 2530 } 2531 } 2532 2533 2534 /* Add additional "reason" check before call to GetLanConfigPages 2535 * (combined with GetIoUnitPage2 call). This prevents a somewhat 2536 * recursive scenario; GetLanConfigPages times out, timer expired 2537 * routine calls HardResetHandler, which calls into here again, 2538 * and we try GetLanConfigPages again... 2539 */ 2540 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2541 2542 /* 2543 * Initialize link list for inactive raid volumes. 2544 */ 2545 mutex_init(&ioc->raid_data.inactive_list_mutex); 2546 INIT_LIST_HEAD(&ioc->raid_data.inactive_list); 2547 2548 switch (ioc->bus_type) { 2549 2550 case SAS: 2551 /* clear persistency table */ 2552 if(ioc->facts.IOCExceptions & 2553 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { 2554 ret = mptbase_sas_persist_operation(ioc, 2555 MPI_SAS_OP_CLEAR_NOT_PRESENT); 2556 if(ret != 0) 2557 goto out; 2558 } 2559 2560 /* Find IM volumes 2561 */ 2562 mpt_findImVolumes(ioc); 2563 2564 /* Check, and possibly reset, the coalescing value 2565 */ 2566 mpt_read_ioc_pg_1(ioc); 2567 2568 break; 2569 2570 case FC: 2571 if ((ioc->pfacts[0].ProtocolFlags & 2572 MPI_PORTFACTS_PROTOCOL_LAN) && 2573 (ioc->lan_cnfg_page0.Header.PageLength == 0)) { 2574 /* 2575 * Pre-fetch the ports LAN MAC address! 2576 * (LANPage1_t stuff) 2577 */ 2578 (void) GetLanConfigPages(ioc); 2579 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 2580 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2581 "LanAddr = %pMR\n", ioc->name, a)); 2582 } 2583 break; 2584 2585 case SPI: 2586 /* Get NVRAM and adapter maximums from SPP 0 and 2 2587 */ 2588 mpt_GetScsiPortSettings(ioc, 0); 2589 2590 /* Get version and length of SDP 1 2591 */ 2592 mpt_readScsiDevicePageHeaders(ioc, 0); 2593 2594 /* Find IM volumes 2595 */ 2596 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) 2597 mpt_findImVolumes(ioc); 2598 2599 /* Check, and possibly reset, the coalescing value 2600 */ 2601 mpt_read_ioc_pg_1(ioc); 2602 2603 mpt_read_ioc_pg_4(ioc); 2604 2605 break; 2606 } 2607 2608 GetIoUnitPage2(ioc); 2609 mpt_get_manufacturing_pg_0(ioc); 2610 } 2611 2612 out: 2613 if ((ret != 0) && irq_allocated) { 2614 free_irq(ioc->pci_irq, ioc); 2615 if (ioc->msi_enable) 2616 pci_disable_msi(ioc->pcidev); 2617 } 2618 return ret; 2619 } 2620 2621 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2622 /** 2623 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function 2624 * @ioc: Pointer to MPT adapter structure 2625 * @pdev: Pointer to (struct pci_dev) structure 2626 * 2627 * Search for PCI bus/dev_function which matches 2628 * PCI bus/dev_function (+/-1) for newly discovered 929, 2629 * 929X, 1030 or 1035. 2630 * 2631 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters 2632 * using alt_ioc pointer fields in their %MPT_ADAPTER structures. 2633 */ 2634 static void 2635 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) 2636 { 2637 struct pci_dev *peer=NULL; 2638 unsigned int slot = PCI_SLOT(pdev->devfn); 2639 unsigned int func = PCI_FUNC(pdev->devfn); 2640 MPT_ADAPTER *ioc_srch; 2641 2642 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," 2643 " searching for devfn match on %x or %x\n", 2644 ioc->name, pci_name(pdev), pdev->bus->number, 2645 pdev->devfn, func-1, func+1)); 2646 2647 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); 2648 if (!peer) { 2649 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); 2650 if (!peer) 2651 return; 2652 } 2653 2654 list_for_each_entry(ioc_srch, &ioc_list, list) { 2655 struct pci_dev *_pcidev = ioc_srch->pcidev; 2656 if (_pcidev == peer) { 2657 /* Paranoia checks */ 2658 if (ioc->alt_ioc != NULL) { 2659 printk(MYIOC_s_WARN_FMT 2660 "Oops, already bound (%s <==> %s)!\n", 2661 ioc->name, ioc->name, ioc->alt_ioc->name); 2662 break; 2663 } else if (ioc_srch->alt_ioc != NULL) { 2664 printk(MYIOC_s_WARN_FMT 2665 "Oops, already bound (%s <==> %s)!\n", 2666 ioc_srch->name, ioc_srch->name, 2667 ioc_srch->alt_ioc->name); 2668 break; 2669 } 2670 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2671 "FOUND! binding %s <==> %s\n", 2672 ioc->name, ioc->name, ioc_srch->name)); 2673 ioc_srch->alt_ioc = ioc; 2674 ioc->alt_ioc = ioc_srch; 2675 } 2676 } 2677 pci_dev_put(peer); 2678 } 2679 2680 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2681 /** 2682 * mpt_adapter_disable - Disable misbehaving MPT adapter. 2683 * @ioc: Pointer to MPT adapter structure 2684 */ 2685 static void 2686 mpt_adapter_disable(MPT_ADAPTER *ioc) 2687 { 2688 int sz; 2689 int ret; 2690 2691 if (ioc->cached_fw != NULL) { 2692 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2693 "%s: Pushing FW onto adapter\n", __func__, ioc->name)); 2694 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) 2695 ioc->cached_fw, CAN_SLEEP)) < 0) { 2696 printk(MYIOC_s_WARN_FMT 2697 ": firmware downloadboot failure (%d)!\n", 2698 ioc->name, ret); 2699 } 2700 } 2701 2702 /* 2703 * Put the controller into ready state (if its not already) 2704 */ 2705 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { 2706 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, 2707 CAN_SLEEP)) { 2708 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) 2709 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " 2710 "reset failed to put ioc in ready state!\n", 2711 ioc->name, __func__); 2712 } else 2713 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " 2714 "failed!\n", ioc->name, __func__); 2715 } 2716 2717 2718 /* Disable adapter interrupts! */ 2719 synchronize_irq(ioc->pcidev->irq); 2720 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2721 ioc->active = 0; 2722 2723 /* Clear any lingering interrupt */ 2724 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2725 CHIPREG_READ32(&ioc->chip->IntStatus); 2726 2727 if (ioc->alloc != NULL) { 2728 sz = ioc->alloc_sz; 2729 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", 2730 ioc->name, ioc->alloc, ioc->alloc_sz)); 2731 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, 2732 ioc->alloc_dma); 2733 ioc->reply_frames = NULL; 2734 ioc->req_frames = NULL; 2735 ioc->alloc = NULL; 2736 ioc->alloc_total -= sz; 2737 } 2738 2739 if (ioc->sense_buf_pool != NULL) { 2740 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 2741 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, 2742 ioc->sense_buf_pool_dma); 2743 ioc->sense_buf_pool = NULL; 2744 ioc->alloc_total -= sz; 2745 } 2746 2747 if (ioc->events != NULL){ 2748 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 2749 kfree(ioc->events); 2750 ioc->events = NULL; 2751 ioc->alloc_total -= sz; 2752 } 2753 2754 mpt_free_fw_memory(ioc); 2755 2756 kfree(ioc->spi_data.nvram); 2757 mpt_inactive_raid_list_free(ioc); 2758 kfree(ioc->raid_data.pIocPg2); 2759 kfree(ioc->raid_data.pIocPg3); 2760 ioc->spi_data.nvram = NULL; 2761 ioc->raid_data.pIocPg3 = NULL; 2762 2763 if (ioc->spi_data.pIocPg4 != NULL) { 2764 sz = ioc->spi_data.IocPg4Sz; 2765 dma_free_coherent(&ioc->pcidev->dev, sz, 2766 ioc->spi_data.pIocPg4, 2767 ioc->spi_data.IocPg4_dma); 2768 ioc->spi_data.pIocPg4 = NULL; 2769 ioc->alloc_total -= sz; 2770 } 2771 2772 if (ioc->ReqToChain != NULL) { 2773 kfree(ioc->ReqToChain); 2774 kfree(ioc->RequestNB); 2775 ioc->ReqToChain = NULL; 2776 } 2777 2778 kfree(ioc->ChainToChain); 2779 ioc->ChainToChain = NULL; 2780 2781 if (ioc->HostPageBuffer != NULL) { 2782 if((ret = mpt_host_page_access_control(ioc, 2783 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { 2784 printk(MYIOC_s_ERR_FMT 2785 ": %s: host page buffers free failed (%d)!\n", 2786 ioc->name, __func__, ret); 2787 } 2788 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2789 "HostPageBuffer free @ %p, sz=%d bytes\n", 2790 ioc->name, ioc->HostPageBuffer, 2791 ioc->HostPageBuffer_sz)); 2792 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz, 2793 ioc->HostPageBuffer, ioc->HostPageBuffer_dma); 2794 ioc->HostPageBuffer = NULL; 2795 ioc->HostPageBuffer_sz = 0; 2796 ioc->alloc_total -= ioc->HostPageBuffer_sz; 2797 } 2798 2799 pci_set_drvdata(ioc->pcidev, NULL); 2800 } 2801 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2802 /** 2803 * mpt_adapter_dispose - Free all resources associated with an MPT adapter 2804 * @ioc: Pointer to MPT adapter structure 2805 * 2806 * This routine unregisters h/w resources and frees all alloc'd memory 2807 * associated with a MPT adapter structure. 2808 */ 2809 static void 2810 mpt_adapter_dispose(MPT_ADAPTER *ioc) 2811 { 2812 int sz_first, sz_last; 2813 2814 if (ioc == NULL) 2815 return; 2816 2817 sz_first = ioc->alloc_total; 2818 2819 mpt_adapter_disable(ioc); 2820 2821 if (ioc->pci_irq != -1) { 2822 free_irq(ioc->pci_irq, ioc); 2823 if (ioc->msi_enable) 2824 pci_disable_msi(ioc->pcidev); 2825 ioc->pci_irq = -1; 2826 } 2827 2828 if (ioc->memmap != NULL) { 2829 iounmap(ioc->memmap); 2830 ioc->memmap = NULL; 2831 } 2832 2833 pci_disable_device(ioc->pcidev); 2834 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2835 2836 /* Zap the adapter lookup ptr! */ 2837 list_del(&ioc->list); 2838 2839 sz_last = ioc->alloc_total; 2840 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", 2841 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); 2842 2843 if (ioc->alt_ioc) 2844 ioc->alt_ioc->alt_ioc = NULL; 2845 2846 kfree(ioc); 2847 } 2848 2849 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2850 /** 2851 * MptDisplayIocCapabilities - Disply IOC's capabilities. 2852 * @ioc: Pointer to MPT adapter structure 2853 */ 2854 static void 2855 MptDisplayIocCapabilities(MPT_ADAPTER *ioc) 2856 { 2857 int i = 0; 2858 2859 printk(KERN_INFO "%s: ", ioc->name); 2860 if (ioc->prod_name) 2861 pr_cont("%s: ", ioc->prod_name); 2862 pr_cont("Capabilities={"); 2863 2864 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { 2865 pr_cont("Initiator"); 2866 i++; 2867 } 2868 2869 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2870 pr_cont("%sTarget", i ? "," : ""); 2871 i++; 2872 } 2873 2874 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 2875 pr_cont("%sLAN", i ? "," : ""); 2876 i++; 2877 } 2878 2879 #if 0 2880 /* 2881 * This would probably evoke more questions than it's worth 2882 */ 2883 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2884 pr_cont("%sLogBusAddr", i ? "," : ""); 2885 i++; 2886 } 2887 #endif 2888 2889 pr_cont("}\n"); 2890 } 2891 2892 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2893 /** 2894 * MakeIocReady - Get IOC to a READY state, using KickStart if needed. 2895 * @ioc: Pointer to MPT_ADAPTER structure 2896 * @force: Force hard KickStart of IOC 2897 * @sleepFlag: Specifies whether the process can sleep 2898 * 2899 * Returns: 2900 * 1 - DIAG reset and READY 2901 * 0 - READY initially OR soft reset and READY 2902 * -1 - Any failure on KickStart 2903 * -2 - Msg Unit Reset Failed 2904 * -3 - IO Unit Reset Failed 2905 * -4 - IOC owned by a PEER 2906 */ 2907 static int 2908 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) 2909 { 2910 u32 ioc_state; 2911 int statefault = 0; 2912 int cntdn; 2913 int hard_reset_done = 0; 2914 int r; 2915 int ii; 2916 int whoinit; 2917 2918 /* Get current [raw] IOC state */ 2919 ioc_state = mpt_GetIocState(ioc, 0); 2920 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); 2921 2922 /* 2923 * Check to see if IOC got left/stuck in doorbell handshake 2924 * grip of death. If so, hard reset the IOC. 2925 */ 2926 if (ioc_state & MPI_DOORBELL_ACTIVE) { 2927 statefault = 1; 2928 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", 2929 ioc->name); 2930 } 2931 2932 /* Is it already READY? */ 2933 if (!statefault && 2934 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { 2935 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2936 "IOC is in READY state\n", ioc->name)); 2937 return 0; 2938 } 2939 2940 /* 2941 * Check to see if IOC is in FAULT state. 2942 */ 2943 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 2944 statefault = 2; 2945 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", 2946 ioc->name); 2947 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", 2948 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); 2949 } 2950 2951 /* 2952 * Hmmm... Did it get left operational? 2953 */ 2954 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { 2955 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", 2956 ioc->name)); 2957 2958 /* Check WhoInit. 2959 * If PCI Peer, exit. 2960 * Else, if no fault conditions are present, issue a MessageUnitReset 2961 * Else, fall through to KickStart case 2962 */ 2963 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; 2964 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2965 "whoinit 0x%x statefault %d force %d\n", 2966 ioc->name, whoinit, statefault, force)); 2967 if (whoinit == MPI_WHOINIT_PCI_PEER) 2968 return -4; 2969 else { 2970 if ((statefault == 0 ) && (force == 0)) { 2971 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) 2972 return 0; 2973 } 2974 statefault = 3; 2975 } 2976 } 2977 2978 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); 2979 if (hard_reset_done < 0) 2980 return -1; 2981 2982 /* 2983 * Loop here waiting for IOC to come READY. 2984 */ 2985 ii = 0; 2986 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ 2987 2988 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 2989 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { 2990 /* 2991 * BIOS or previous driver load left IOC in OP state. 2992 * Reset messaging FIFOs. 2993 */ 2994 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { 2995 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); 2996 return -2; 2997 } 2998 } else if (ioc_state == MPI_IOC_STATE_RESET) { 2999 /* 3000 * Something is wrong. Try to get IOC back 3001 * to a known state. 3002 */ 3003 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { 3004 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); 3005 return -3; 3006 } 3007 } 3008 3009 ii++; cntdn--; 3010 if (!cntdn) { 3011 printk(MYIOC_s_ERR_FMT 3012 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 3013 ioc->name, ioc_state, (int)((ii+5)/HZ)); 3014 return -ETIME; 3015 } 3016 3017 if (sleepFlag == CAN_SLEEP) { 3018 msleep(1); 3019 } else { 3020 mdelay (1); /* 1 msec delay */ 3021 } 3022 3023 } 3024 3025 if (statefault < 3) { 3026 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, 3027 statefault == 1 ? "stuck handshake" : "IOC FAULT"); 3028 } 3029 3030 return hard_reset_done; 3031 } 3032 3033 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3034 /** 3035 * mpt_GetIocState - Get the current state of a MPT adapter. 3036 * @ioc: Pointer to MPT_ADAPTER structure 3037 * @cooked: Request raw or cooked IOC state 3038 * 3039 * Returns all IOC Doorbell register bits if cooked==0, else just the 3040 * Doorbell bits in MPI_IOC_STATE_MASK. 3041 */ 3042 u32 3043 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) 3044 { 3045 u32 s, sc; 3046 3047 /* Get! */ 3048 s = CHIPREG_READ32(&ioc->chip->Doorbell); 3049 sc = s & MPI_IOC_STATE_MASK; 3050 3051 /* Save! */ 3052 ioc->last_state = sc; 3053 3054 return cooked ? sc : s; 3055 } 3056 3057 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3058 /** 3059 * GetIocFacts - Send IOCFacts request to MPT adapter. 3060 * @ioc: Pointer to MPT_ADAPTER structure 3061 * @sleepFlag: Specifies whether the process can sleep 3062 * @reason: If recovery, only update facts. 3063 * 3064 * Returns 0 for success, non-zero for failure. 3065 */ 3066 static int 3067 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) 3068 { 3069 IOCFacts_t get_facts; 3070 IOCFactsReply_t *facts; 3071 int r; 3072 int req_sz; 3073 int reply_sz; 3074 int sz; 3075 u32 vv; 3076 u8 shiftFactor=1; 3077 3078 /* IOC *must* NOT be in RESET state! */ 3079 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3080 printk(KERN_ERR MYNAM 3081 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", 3082 ioc->name, ioc->last_state); 3083 return -44; 3084 } 3085 3086 facts = &ioc->facts; 3087 3088 /* Destination (reply area)... */ 3089 reply_sz = sizeof(*facts); 3090 memset(facts, 0, reply_sz); 3091 3092 /* Request area (get_facts on the stack right now!) */ 3093 req_sz = sizeof(get_facts); 3094 memset(&get_facts, 0, req_sz); 3095 3096 get_facts.Function = MPI_FUNCTION_IOC_FACTS; 3097 /* Assert: All other get_facts fields are zero! */ 3098 3099 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3100 "Sending get IocFacts request req_sz=%d reply_sz=%d\n", 3101 ioc->name, req_sz, reply_sz)); 3102 3103 /* No non-zero fields in the get_facts request are greater than 3104 * 1 byte in size, so we can just fire it off as is. 3105 */ 3106 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, 3107 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); 3108 if (r != 0) 3109 return r; 3110 3111 /* 3112 * Now byte swap (GRRR) the necessary fields before any further 3113 * inspection of reply contents. 3114 * 3115 * But need to do some sanity checks on MsgLength (byte) field 3116 * to make sure we don't zero IOC's req_sz! 3117 */ 3118 /* Did we get a valid reply? */ 3119 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { 3120 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3121 /* 3122 * If not been here, done that, save off first WhoInit value 3123 */ 3124 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) 3125 ioc->FirstWhoInit = facts->WhoInit; 3126 } 3127 3128 facts->MsgVersion = le16_to_cpu(facts->MsgVersion); 3129 facts->MsgContext = le32_to_cpu(facts->MsgContext); 3130 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); 3131 facts->IOCStatus = le16_to_cpu(facts->IOCStatus); 3132 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); 3133 /* CHECKME! IOCStatus, IOCLogInfo */ 3134 3135 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); 3136 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); 3137 3138 /* 3139 * FC f/w version changed between 1.1 and 1.2 3140 * Old: u16{Major(4),Minor(4),SubMinor(8)} 3141 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} 3142 */ 3143 if (facts->MsgVersion < MPI_VERSION_01_02) { 3144 /* 3145 * Handle old FC f/w style, convert to new... 3146 */ 3147 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); 3148 facts->FWVersion.Word = 3149 ((oldv<<12) & 0xFF000000) | 3150 ((oldv<<8) & 0x000FFF00); 3151 } else 3152 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); 3153 3154 facts->ProductID = le16_to_cpu(facts->ProductID); 3155 3156 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) 3157 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) 3158 ioc->ir_firmware = 1; 3159 3160 facts->CurrentHostMfaHighAddr = 3161 le32_to_cpu(facts->CurrentHostMfaHighAddr); 3162 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); 3163 facts->CurrentSenseBufferHighAddr = 3164 le32_to_cpu(facts->CurrentSenseBufferHighAddr); 3165 facts->CurReplyFrameSize = 3166 le16_to_cpu(facts->CurReplyFrameSize); 3167 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); 3168 3169 /* 3170 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx 3171 * Older MPI-1.00.xx struct had 13 dwords, and enlarged 3172 * to 14 in MPI-1.01.0x. 3173 */ 3174 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && 3175 facts->MsgVersion > MPI_VERSION_01_00) { 3176 facts->FWImageSize = le32_to_cpu(facts->FWImageSize); 3177 } 3178 3179 facts->FWImageSize = ALIGN(facts->FWImageSize, 4); 3180 3181 if (!facts->RequestFrameSize) { 3182 /* Something is wrong! */ 3183 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", 3184 ioc->name); 3185 return -55; 3186 } 3187 3188 r = sz = facts->BlockSize; 3189 vv = ((63 / (sz * 4)) + 1) & 0x03; 3190 ioc->NB_for_64_byte_frame = vv; 3191 while ( sz ) 3192 { 3193 shiftFactor++; 3194 sz = sz >> 1; 3195 } 3196 ioc->NBShiftFactor = shiftFactor; 3197 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3198 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", 3199 ioc->name, vv, shiftFactor, r)); 3200 3201 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3202 /* 3203 * Set values for this IOC's request & reply frame sizes, 3204 * and request & reply queue depths... 3205 */ 3206 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); 3207 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); 3208 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 3209 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); 3210 3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", 3212 ioc->name, ioc->reply_sz, ioc->reply_depth)); 3213 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", 3214 ioc->name, ioc->req_sz, ioc->req_depth)); 3215 3216 /* Get port facts! */ 3217 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) 3218 return r; 3219 } 3220 } else { 3221 printk(MYIOC_s_ERR_FMT 3222 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", 3223 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, 3224 RequestFrameSize)/sizeof(u32))); 3225 return -66; 3226 } 3227 3228 return 0; 3229 } 3230 3231 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3232 /** 3233 * GetPortFacts - Send PortFacts request to MPT adapter. 3234 * @ioc: Pointer to MPT_ADAPTER structure 3235 * @portnum: Port number 3236 * @sleepFlag: Specifies whether the process can sleep 3237 * 3238 * Returns 0 for success, non-zero for failure. 3239 */ 3240 static int 3241 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3242 { 3243 PortFacts_t get_pfacts; 3244 PortFactsReply_t *pfacts; 3245 int ii; 3246 int req_sz; 3247 int reply_sz; 3248 int max_id; 3249 3250 /* IOC *must* NOT be in RESET state! */ 3251 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3252 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", 3253 ioc->name, ioc->last_state ); 3254 return -4; 3255 } 3256 3257 pfacts = &ioc->pfacts[portnum]; 3258 3259 /* Destination (reply area)... */ 3260 reply_sz = sizeof(*pfacts); 3261 memset(pfacts, 0, reply_sz); 3262 3263 /* Request area (get_pfacts on the stack right now!) */ 3264 req_sz = sizeof(get_pfacts); 3265 memset(&get_pfacts, 0, req_sz); 3266 3267 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; 3268 get_pfacts.PortNumber = portnum; 3269 /* Assert: All other get_pfacts fields are zero! */ 3270 3271 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", 3272 ioc->name, portnum)); 3273 3274 /* No non-zero fields in the get_pfacts request are greater than 3275 * 1 byte in size, so we can just fire it off as is. 3276 */ 3277 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, 3278 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); 3279 if (ii != 0) 3280 return ii; 3281 3282 /* Did we get a valid reply? */ 3283 3284 /* Now byte swap the necessary fields in the response. */ 3285 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); 3286 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); 3287 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); 3288 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); 3289 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); 3290 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); 3291 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); 3292 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); 3293 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); 3294 3295 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : 3296 pfacts->MaxDevices; 3297 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; 3298 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; 3299 3300 /* 3301 * Place all the devices on channels 3302 * 3303 * (for debuging) 3304 */ 3305 if (mpt_channel_mapping) { 3306 ioc->devices_per_bus = 1; 3307 ioc->number_of_buses = (max_id > 255) ? 255 : max_id; 3308 } 3309 3310 return 0; 3311 } 3312 3313 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3314 /** 3315 * SendIocInit - Send IOCInit request to MPT adapter. 3316 * @ioc: Pointer to MPT_ADAPTER structure 3317 * @sleepFlag: Specifies whether the process can sleep 3318 * 3319 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. 3320 * 3321 * Returns 0 for success, non-zero for failure. 3322 */ 3323 static int 3324 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) 3325 { 3326 IOCInit_t ioc_init; 3327 MPIDefaultReply_t init_reply; 3328 u32 state; 3329 int r; 3330 int count; 3331 int cntdn; 3332 3333 memset(&ioc_init, 0, sizeof(ioc_init)); 3334 memset(&init_reply, 0, sizeof(init_reply)); 3335 3336 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; 3337 ioc_init.Function = MPI_FUNCTION_IOC_INIT; 3338 3339 /* If we are in a recovery mode and we uploaded the FW image, 3340 * then this pointer is not NULL. Skip the upload a second time. 3341 * Set this flag if cached_fw set for either IOC. 3342 */ 3343 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 3344 ioc->upload_fw = 1; 3345 else 3346 ioc->upload_fw = 0; 3347 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", 3348 ioc->name, ioc->upload_fw, ioc->facts.Flags)); 3349 3350 ioc_init.MaxDevices = (U8)ioc->devices_per_bus; 3351 ioc_init.MaxBuses = (U8)ioc->number_of_buses; 3352 3353 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", 3354 ioc->name, ioc->facts.MsgVersion)); 3355 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { 3356 // set MsgVersion and HeaderVersion host driver was built with 3357 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); 3358 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); 3359 3360 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { 3361 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; 3362 } else if(mpt_host_page_alloc(ioc, &ioc_init)) 3363 return -99; 3364 } 3365 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ 3366 3367 if (ioc->sg_addr_size == sizeof(u64)) { 3368 /* Save the upper 32-bits of the request 3369 * (reply) and sense buffers. 3370 */ 3371 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); 3372 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 3373 } else { 3374 /* Force 32-bit addressing */ 3375 ioc_init.HostMfaHighAddr = cpu_to_le32(0); 3376 ioc_init.SenseBufferHighAddr = cpu_to_le32(0); 3377 } 3378 3379 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; 3380 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; 3381 ioc->facts.MaxDevices = ioc_init.MaxDevices; 3382 ioc->facts.MaxBuses = ioc_init.MaxBuses; 3383 3384 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", 3385 ioc->name, &ioc_init)); 3386 3387 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, 3388 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); 3389 if (r != 0) { 3390 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); 3391 return r; 3392 } 3393 3394 /* No need to byte swap the multibyte fields in the reply 3395 * since we don't even look at its contents. 3396 */ 3397 3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", 3399 ioc->name, &ioc_init)); 3400 3401 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { 3402 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); 3403 return r; 3404 } 3405 3406 /* YIKES! SUPER IMPORTANT!!! 3407 * Poll IocState until _OPERATIONAL while IOC is doing 3408 * LoopInit and TargetDiscovery! 3409 */ 3410 count = 0; 3411 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ 3412 state = mpt_GetIocState(ioc, 1); 3413 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { 3414 if (sleepFlag == CAN_SLEEP) { 3415 msleep(1); 3416 } else { 3417 mdelay(1); 3418 } 3419 3420 if (!cntdn) { 3421 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", 3422 ioc->name, (int)((count+5)/HZ)); 3423 return -9; 3424 } 3425 3426 state = mpt_GetIocState(ioc, 1); 3427 count++; 3428 } 3429 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", 3430 ioc->name, count)); 3431 3432 ioc->aen_event_read_flag=0; 3433 return r; 3434 } 3435 3436 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3437 /** 3438 * SendPortEnable - Send PortEnable request to MPT adapter port. 3439 * @ioc: Pointer to MPT_ADAPTER structure 3440 * @portnum: Port number to enable 3441 * @sleepFlag: Specifies whether the process can sleep 3442 * 3443 * Send PortEnable to bring IOC to OPERATIONAL state. 3444 * 3445 * Returns 0 for success, non-zero for failure. 3446 */ 3447 static int 3448 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3449 { 3450 PortEnable_t port_enable; 3451 MPIDefaultReply_t reply_buf; 3452 int rc; 3453 int req_sz; 3454 int reply_sz; 3455 3456 /* Destination... */ 3457 reply_sz = sizeof(MPIDefaultReply_t); 3458 memset(&reply_buf, 0, reply_sz); 3459 3460 req_sz = sizeof(PortEnable_t); 3461 memset(&port_enable, 0, req_sz); 3462 3463 port_enable.Function = MPI_FUNCTION_PORT_ENABLE; 3464 port_enable.PortNumber = portnum; 3465 /* port_enable.ChainOffset = 0; */ 3466 /* port_enable.MsgFlags = 0; */ 3467 /* port_enable.MsgContext = 0; */ 3468 3469 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", 3470 ioc->name, portnum, &port_enable)); 3471 3472 /* RAID FW may take a long time to enable 3473 */ 3474 if (ioc->ir_firmware || ioc->bus_type == SAS) { 3475 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3476 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3477 300 /*seconds*/, sleepFlag); 3478 } else { 3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3481 30 /*seconds*/, sleepFlag); 3482 } 3483 return rc; 3484 } 3485 3486 /** 3487 * mpt_alloc_fw_memory - allocate firmware memory 3488 * @ioc: Pointer to MPT_ADAPTER structure 3489 * @size: total FW bytes 3490 * 3491 * If memory has already been allocated, the same (cached) value 3492 * is returned. 3493 * 3494 * Return 0 if successful, or non-zero for failure 3495 **/ 3496 int 3497 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) 3498 { 3499 int rc; 3500 3501 if (ioc->cached_fw) { 3502 rc = 0; /* use already allocated memory */ 3503 goto out; 3504 } 3505 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 3506 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ 3507 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; 3508 rc = 0; 3509 goto out; 3510 } 3511 ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size, 3512 &ioc->cached_fw_dma, GFP_ATOMIC); 3513 if (!ioc->cached_fw) { 3514 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", 3515 ioc->name); 3516 rc = -1; 3517 } else { 3518 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", 3519 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); 3520 ioc->alloc_total += size; 3521 rc = 0; 3522 } 3523 out: 3524 return rc; 3525 } 3526 3527 /** 3528 * mpt_free_fw_memory - free firmware memory 3529 * @ioc: Pointer to MPT_ADAPTER structure 3530 * 3531 * If alt_img is NULL, delete from ioc structure. 3532 * Else, delete a secondary image in same format. 3533 **/ 3534 void 3535 mpt_free_fw_memory(MPT_ADAPTER *ioc) 3536 { 3537 int sz; 3538 3539 if (!ioc->cached_fw) 3540 return; 3541 3542 sz = ioc->facts.FWImageSize; 3543 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", 3544 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3545 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw, 3546 ioc->cached_fw_dma); 3547 ioc->alloc_total -= sz; 3548 ioc->cached_fw = NULL; 3549 } 3550 3551 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3552 /** 3553 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. 3554 * @ioc: Pointer to MPT_ADAPTER structure 3555 * @sleepFlag: Specifies whether the process can sleep 3556 * 3557 * Returns 0 for success, >0 for handshake failure 3558 * <0 for fw upload failure. 3559 * 3560 * Remark: If bound IOC and a successful FWUpload was performed 3561 * on the bound IOC, the second image is discarded 3562 * and memory is free'd. Both channels must upload to prevent 3563 * IOC from running in degraded mode. 3564 */ 3565 static int 3566 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) 3567 { 3568 u8 reply[sizeof(FWUploadReply_t)]; 3569 FWUpload_t *prequest; 3570 FWUploadReply_t *preply; 3571 FWUploadTCSGE_t *ptcsge; 3572 u32 flagsLength; 3573 int ii, sz, reply_sz; 3574 int cmdStatus; 3575 int request_size; 3576 /* If the image size is 0, we are done. 3577 */ 3578 if ((sz = ioc->facts.FWImageSize) == 0) 3579 return 0; 3580 3581 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) 3582 return -ENOMEM; 3583 3584 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", 3585 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3586 3587 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : 3588 kzalloc(ioc->req_sz, GFP_KERNEL); 3589 if (!prequest) { 3590 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " 3591 "while allocating memory \n", ioc->name)); 3592 mpt_free_fw_memory(ioc); 3593 return -ENOMEM; 3594 } 3595 3596 preply = (FWUploadReply_t *)&reply; 3597 3598 reply_sz = sizeof(reply); 3599 memset(preply, 0, reply_sz); 3600 3601 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; 3602 prequest->Function = MPI_FUNCTION_FW_UPLOAD; 3603 3604 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; 3605 ptcsge->DetailsLength = 12; 3606 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 3607 ptcsge->ImageSize = cpu_to_le32(sz); 3608 ptcsge++; 3609 3610 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; 3611 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); 3612 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + 3613 ioc->SGE_size; 3614 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " 3615 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, 3616 ioc->facts.FWImageSize, request_size)); 3617 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); 3618 3619 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, 3620 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); 3621 3622 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " 3623 "rc=%x \n", ioc->name, ii)); 3624 3625 cmdStatus = -EFAULT; 3626 if (ii == 0) { 3627 /* Handshake transfer was complete and successful. 3628 * Check the Reply Frame. 3629 */ 3630 int status; 3631 status = le16_to_cpu(preply->IOCStatus) & 3632 MPI_IOCSTATUS_MASK; 3633 if (status == MPI_IOCSTATUS_SUCCESS && 3634 ioc->facts.FWImageSize == 3635 le32_to_cpu(preply->ActualImageSize)) 3636 cmdStatus = 0; 3637 } 3638 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", 3639 ioc->name, cmdStatus)); 3640 3641 3642 if (cmdStatus) { 3643 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " 3644 "freeing image \n", ioc->name)); 3645 mpt_free_fw_memory(ioc); 3646 } 3647 kfree(prequest); 3648 3649 return cmdStatus; 3650 } 3651 3652 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3653 /** 3654 * mpt_downloadboot - DownloadBoot code 3655 * @ioc: Pointer to MPT_ADAPTER structure 3656 * @pFwHeader: Pointer to firmware header info 3657 * @sleepFlag: Specifies whether the process can sleep 3658 * 3659 * FwDownloadBoot requires Programmed IO access. 3660 * 3661 * Returns 0 for success 3662 * -1 FW Image size is 0 3663 * -2 No valid cached_fw Pointer 3664 * <0 for fw upload failure. 3665 */ 3666 static int 3667 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) 3668 { 3669 MpiExtImageHeader_t *pExtImage; 3670 u32 fwSize; 3671 u32 diag0val; 3672 int count; 3673 u32 *ptrFw; 3674 u32 diagRwData; 3675 u32 nextImage; 3676 u32 load_addr; 3677 u32 ioc_state=0; 3678 3679 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", 3680 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); 3681 3682 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3683 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3684 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3688 3689 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); 3690 3691 /* wait 1 msec */ 3692 if (sleepFlag == CAN_SLEEP) { 3693 msleep(1); 3694 } else { 3695 mdelay (1); 3696 } 3697 3698 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3699 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 3700 3701 for (count = 0; count < 30; count ++) { 3702 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3703 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 3704 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", 3705 ioc->name, count)); 3706 break; 3707 } 3708 /* wait .1 sec */ 3709 if (sleepFlag == CAN_SLEEP) { 3710 msleep (100); 3711 } else { 3712 mdelay (100); 3713 } 3714 } 3715 3716 if ( count == 30 ) { 3717 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " 3718 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", 3719 ioc->name, diag0val)); 3720 return -3; 3721 } 3722 3723 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3724 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3725 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3729 3730 /* Set the DiagRwEn and Disable ARM bits */ 3731 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); 3732 3733 fwSize = (pFwHeader->ImageSize + 3)/4; 3734 ptrFw = (u32 *) pFwHeader; 3735 3736 /* Write the LoadStartAddress to the DiagRw Address Register 3737 * using Programmed IO 3738 */ 3739 if (ioc->errata_flag_1064) 3740 pci_enable_io_access(ioc->pcidev); 3741 3742 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); 3743 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", 3744 ioc->name, pFwHeader->LoadStartAddress)); 3745 3746 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", 3747 ioc->name, fwSize*4, ptrFw)); 3748 while (fwSize--) { 3749 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3750 } 3751 3752 nextImage = pFwHeader->NextImageHeaderOffset; 3753 while (nextImage) { 3754 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); 3755 3756 load_addr = pExtImage->LoadStartAddress; 3757 3758 fwSize = (pExtImage->ImageSize + 3) >> 2; 3759 ptrFw = (u32 *)pExtImage; 3760 3761 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", 3762 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); 3763 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); 3764 3765 while (fwSize--) { 3766 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3767 } 3768 nextImage = pExtImage->NextImageHeaderOffset; 3769 } 3770 3771 /* Write the IopResetVectorRegAddr */ 3772 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); 3773 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); 3774 3775 /* Write the IopResetVectorValue */ 3776 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); 3777 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); 3778 3779 /* Clear the internal flash bad bit - autoincrementing register, 3780 * so must do two writes. 3781 */ 3782 if (ioc->bus_type == SPI) { 3783 /* 3784 * 1030 and 1035 H/W errata, workaround to access 3785 * the ClearFlashBadSignatureBit 3786 */ 3787 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3788 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); 3789 diagRwData |= 0x40000000; 3790 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3791 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); 3792 3793 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { 3794 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3795 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | 3796 MPI_DIAG_CLEAR_FLASH_BAD_SIG); 3797 3798 /* wait 1 msec */ 3799 if (sleepFlag == CAN_SLEEP) { 3800 msleep (1); 3801 } else { 3802 mdelay (1); 3803 } 3804 } 3805 3806 if (ioc->errata_flag_1064) 3807 pci_disable_io_access(ioc->pcidev); 3808 3809 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3810 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " 3811 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", 3812 ioc->name, diag0val)); 3813 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); 3814 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", 3815 ioc->name, diag0val)); 3816 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 3817 3818 /* Write 0xFF to reset the sequencer */ 3819 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3820 3821 if (ioc->bus_type == SAS) { 3822 ioc_state = mpt_GetIocState(ioc, 0); 3823 if ( (GetIocFacts(ioc, sleepFlag, 3824 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { 3825 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", 3826 ioc->name, ioc_state)); 3827 return -EFAULT; 3828 } 3829 } 3830 3831 for (count=0; count<HZ*20; count++) { 3832 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { 3833 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3834 "downloadboot successful! (count=%d) IocState=%x\n", 3835 ioc->name, count, ioc_state)); 3836 if (ioc->bus_type == SAS) { 3837 return 0; 3838 } 3839 if ((SendIocInit(ioc, sleepFlag)) != 0) { 3840 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3841 "downloadboot: SendIocInit failed\n", 3842 ioc->name)); 3843 return -EFAULT; 3844 } 3845 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3846 "downloadboot: SendIocInit successful\n", 3847 ioc->name)); 3848 return 0; 3849 } 3850 if (sleepFlag == CAN_SLEEP) { 3851 msleep (10); 3852 } else { 3853 mdelay (10); 3854 } 3855 } 3856 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3857 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); 3858 return -EFAULT; 3859 } 3860 3861 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3862 /** 3863 * KickStart - Perform hard reset of MPT adapter. 3864 * @ioc: Pointer to MPT_ADAPTER structure 3865 * @force: Force hard reset 3866 * @sleepFlag: Specifies whether the process can sleep 3867 * 3868 * This routine places MPT adapter in diagnostic mode via the 3869 * WriteSequence register, and then performs a hard reset of adapter 3870 * via the Diagnostic register. 3871 * 3872 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) 3873 * or NO_SLEEP (interrupt thread, use mdelay) 3874 * force - 1 if doorbell active, board fault state 3875 * board operational, IOC_RECOVERY or 3876 * IOC_BRINGUP and there is an alt_ioc. 3877 * 0 else 3878 * 3879 * Returns: 3880 * 1 - hard reset, READY 3881 * 0 - no reset due to History bit, READY 3882 * -1 - no reset due to History bit but not READY 3883 * OR reset but failed to come READY 3884 * -2 - no reset, could not enter DIAG mode 3885 * -3 - reset but bad FW bit 3886 */ 3887 static int 3888 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) 3889 { 3890 int hard_reset_done = 0; 3891 u32 ioc_state=0; 3892 int cnt,cntdn; 3893 3894 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); 3895 if (ioc->bus_type == SPI) { 3896 /* Always issue a Msg Unit Reset first. This will clear some 3897 * SCSI bus hang conditions. 3898 */ 3899 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 3900 3901 if (sleepFlag == CAN_SLEEP) { 3902 msleep (1000); 3903 } else { 3904 mdelay (1000); 3905 } 3906 } 3907 3908 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); 3909 if (hard_reset_done < 0) 3910 return hard_reset_done; 3911 3912 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", 3913 ioc->name)); 3914 3915 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ 3916 for (cnt=0; cnt<cntdn; cnt++) { 3917 ioc_state = mpt_GetIocState(ioc, 1); 3918 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { 3919 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", 3920 ioc->name, cnt)); 3921 return hard_reset_done; 3922 } 3923 if (sleepFlag == CAN_SLEEP) { 3924 msleep (10); 3925 } else { 3926 mdelay (10); 3927 } 3928 } 3929 3930 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", 3931 ioc->name, mpt_GetIocState(ioc, 0))); 3932 return -1; 3933 } 3934 3935 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3936 /** 3937 * mpt_diag_reset - Perform hard reset of the adapter. 3938 * @ioc: Pointer to MPT_ADAPTER structure 3939 * @ignore: Set if to honor and clear to ignore 3940 * the reset history bit 3941 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, 3942 * else set to NO_SLEEP (use mdelay instead) 3943 * 3944 * This routine places the adapter in diagnostic mode via the 3945 * WriteSequence register and then performs a hard reset of adapter 3946 * via the Diagnostic register. Adapter should be in ready state 3947 * upon successful completion. 3948 * 3949 * Returns: 1 hard reset successful 3950 * 0 no reset performed because reset history bit set 3951 * -2 enabling diagnostic mode failed 3952 * -3 diagnostic reset failed 3953 */ 3954 static int 3955 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) 3956 { 3957 u32 diag0val; 3958 u32 doorbell; 3959 int hard_reset_done = 0; 3960 int count = 0; 3961 u32 diag1val = 0; 3962 MpiFwHeader_t *cached_fw; /* Pointer to FW */ 3963 u8 cb_idx; 3964 3965 /* Clear any existing interrupts */ 3966 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 3967 3968 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { 3969 3970 if (!ignore) 3971 return 0; 3972 3973 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " 3974 "address=%p\n", ioc->name, __func__, 3975 &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); 3976 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); 3977 if (sleepFlag == CAN_SLEEP) 3978 msleep(1); 3979 else 3980 mdelay(1); 3981 3982 /* 3983 * Call each currently registered protocol IOC reset handler 3984 * with pre-reset indication. 3985 * NOTE: If we're doing _IOC_BRINGUP, there can be no 3986 * MptResetHandlers[] registered yet. 3987 */ 3988 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 3989 if (MptResetHandlers[cb_idx]) 3990 (*(MptResetHandlers[cb_idx]))(ioc, 3991 MPT_IOC_PRE_RESET); 3992 } 3993 3994 for (count = 0; count < 60; count ++) { 3995 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 3996 doorbell &= MPI_IOC_STATE_MASK; 3997 3998 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3999 "looking for READY STATE: doorbell=%x" 4000 " count=%d\n", 4001 ioc->name, doorbell, count)); 4002 4003 if (doorbell == MPI_IOC_STATE_READY) { 4004 return 1; 4005 } 4006 4007 /* wait 1 sec */ 4008 if (sleepFlag == CAN_SLEEP) 4009 msleep(1000); 4010 else 4011 mdelay(1000); 4012 } 4013 return -1; 4014 } 4015 4016 /* Use "Diagnostic reset" method! (only thing available!) */ 4017 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4018 4019 if (ioc->debug_level & MPT_DEBUG) { 4020 if (ioc->alt_ioc) 4021 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4022 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", 4023 ioc->name, diag0val, diag1val)); 4024 } 4025 4026 /* Do the reset if we are told to ignore the reset history 4027 * or if the reset history is 0 4028 */ 4029 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { 4030 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4031 /* Write magic sequence to WriteSequence register 4032 * Loop until in diagnostic mode 4033 */ 4034 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4035 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4036 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4040 4041 /* wait 100 msec */ 4042 if (sleepFlag == CAN_SLEEP) { 4043 msleep (100); 4044 } else { 4045 mdelay (100); 4046 } 4047 4048 count++; 4049 if (count > 20) { 4050 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4051 ioc->name, diag0val); 4052 return -2; 4053 4054 } 4055 4056 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4057 4058 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", 4059 ioc->name, diag0val)); 4060 } 4061 4062 if (ioc->debug_level & MPT_DEBUG) { 4063 if (ioc->alt_ioc) 4064 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4065 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", 4066 ioc->name, diag0val, diag1val)); 4067 } 4068 /* 4069 * Disable the ARM (Bug fix) 4070 * 4071 */ 4072 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); 4073 mdelay(1); 4074 4075 /* 4076 * Now hit the reset bit in the Diagnostic register 4077 * (THE BIG HAMMER!) (Clears DRWE bit). 4078 */ 4079 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 4080 hard_reset_done = 1; 4081 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", 4082 ioc->name)); 4083 4084 /* 4085 * Call each currently registered protocol IOC reset handler 4086 * with pre-reset indication. 4087 * NOTE: If we're doing _IOC_BRINGUP, there can be no 4088 * MptResetHandlers[] registered yet. 4089 */ 4090 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 4091 if (MptResetHandlers[cb_idx]) { 4092 mpt_signal_reset(cb_idx, 4093 ioc, MPT_IOC_PRE_RESET); 4094 if (ioc->alt_ioc) { 4095 mpt_signal_reset(cb_idx, 4096 ioc->alt_ioc, MPT_IOC_PRE_RESET); 4097 } 4098 } 4099 } 4100 4101 if (ioc->cached_fw) 4102 cached_fw = (MpiFwHeader_t *)ioc->cached_fw; 4103 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) 4104 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; 4105 else 4106 cached_fw = NULL; 4107 if (cached_fw) { 4108 /* If the DownloadBoot operation fails, the 4109 * IOC will be left unusable. This is a fatal error 4110 * case. _diag_reset will return < 0 4111 */ 4112 for (count = 0; count < 30; count ++) { 4113 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4114 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 4115 break; 4116 } 4117 4118 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", 4119 ioc->name, diag0val, count)); 4120 /* wait 1 sec */ 4121 if (sleepFlag == CAN_SLEEP) { 4122 msleep (1000); 4123 } else { 4124 mdelay (1000); 4125 } 4126 } 4127 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { 4128 printk(MYIOC_s_WARN_FMT 4129 "firmware downloadboot failure (%d)!\n", ioc->name, count); 4130 } 4131 4132 } else { 4133 /* Wait for FW to reload and for board 4134 * to go to the READY state. 4135 * Maximum wait is 60 seconds. 4136 * If fail, no error will check again 4137 * with calling program. 4138 */ 4139 for (count = 0; count < 60; count ++) { 4140 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4141 doorbell &= MPI_IOC_STATE_MASK; 4142 4143 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4144 "looking for READY STATE: doorbell=%x" 4145 " count=%d\n", ioc->name, doorbell, count)); 4146 4147 if (doorbell == MPI_IOC_STATE_READY) { 4148 break; 4149 } 4150 4151 /* wait 1 sec */ 4152 if (sleepFlag == CAN_SLEEP) { 4153 msleep (1000); 4154 } else { 4155 mdelay (1000); 4156 } 4157 } 4158 4159 if (doorbell != MPI_IOC_STATE_READY) 4160 printk(MYIOC_s_ERR_FMT "Failed to come READY " 4161 "after reset! IocState=%x", ioc->name, 4162 doorbell); 4163 } 4164 } 4165 4166 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4167 if (ioc->debug_level & MPT_DEBUG) { 4168 if (ioc->alt_ioc) 4169 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4170 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", 4171 ioc->name, diag0val, diag1val)); 4172 } 4173 4174 /* Clear RESET_HISTORY bit! Place board in the 4175 * diagnostic mode to update the diag register. 4176 */ 4177 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4178 count = 0; 4179 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4180 /* Write magic sequence to WriteSequence register 4181 * Loop until in diagnostic mode 4182 */ 4183 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4184 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4185 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4189 4190 /* wait 100 msec */ 4191 if (sleepFlag == CAN_SLEEP) { 4192 msleep (100); 4193 } else { 4194 mdelay (100); 4195 } 4196 4197 count++; 4198 if (count > 20) { 4199 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4200 ioc->name, diag0val); 4201 break; 4202 } 4203 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4204 } 4205 diag0val &= ~MPI_DIAG_RESET_HISTORY; 4206 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 4207 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4208 if (diag0val & MPI_DIAG_RESET_HISTORY) { 4209 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", 4210 ioc->name); 4211 } 4212 4213 /* Disable Diagnostic Mode 4214 */ 4215 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); 4216 4217 /* Check FW reload status flags. 4218 */ 4219 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4220 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { 4221 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", 4222 ioc->name, diag0val); 4223 return -3; 4224 } 4225 4226 if (ioc->debug_level & MPT_DEBUG) { 4227 if (ioc->alt_ioc) 4228 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4229 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", 4230 ioc->name, diag0val, diag1val)); 4231 } 4232 4233 /* 4234 * Reset flag that says we've enabled event notification 4235 */ 4236 ioc->facts.EventState = 0; 4237 4238 if (ioc->alt_ioc) 4239 ioc->alt_ioc->facts.EventState = 0; 4240 4241 return hard_reset_done; 4242 } 4243 4244 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4245 /** 4246 * SendIocReset - Send IOCReset request to MPT adapter. 4247 * @ioc: Pointer to MPT_ADAPTER structure 4248 * @reset_type: reset type, expected values are 4249 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET 4250 * @sleepFlag: Specifies whether the process can sleep 4251 * 4252 * Send IOCReset request to the MPT adapter. 4253 * 4254 * Returns 0 for success, non-zero for failure. 4255 */ 4256 static int 4257 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) 4258 { 4259 int r; 4260 u32 state; 4261 int cntdn, count; 4262 4263 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", 4264 ioc->name, reset_type)); 4265 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); 4266 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4267 return r; 4268 4269 /* FW ACK'd request, wait for READY state 4270 */ 4271 count = 0; 4272 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ 4273 4274 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 4275 cntdn--; 4276 count++; 4277 if (!cntdn) { 4278 if (sleepFlag != CAN_SLEEP) 4279 count *= 10; 4280 4281 printk(MYIOC_s_ERR_FMT 4282 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 4283 ioc->name, state, (int)((count+5)/HZ)); 4284 return -ETIME; 4285 } 4286 4287 if (sleepFlag == CAN_SLEEP) { 4288 msleep(1); 4289 } else { 4290 mdelay (1); /* 1 msec delay */ 4291 } 4292 } 4293 4294 /* TODO! 4295 * Cleanup all event stuff for this IOC; re-issue EventNotification 4296 * request if needed. 4297 */ 4298 if (ioc->facts.Function) 4299 ioc->facts.EventState = 0; 4300 4301 return 0; 4302 } 4303 4304 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4305 /** 4306 * initChainBuffers - Allocate memory for and initialize chain buffers 4307 * @ioc: Pointer to MPT_ADAPTER structure 4308 * 4309 * Allocates memory for and initializes chain buffers, 4310 * chain buffer control arrays and spinlock. 4311 */ 4312 static int 4313 initChainBuffers(MPT_ADAPTER *ioc) 4314 { 4315 u8 *mem; 4316 int sz, ii, num_chain; 4317 int scale, num_sge, numSGE; 4318 4319 /* ReqToChain size must equal the req_depth 4320 * index = req_idx 4321 */ 4322 if (ioc->ReqToChain == NULL) { 4323 sz = ioc->req_depth * sizeof(int); 4324 mem = kmalloc(sz, GFP_ATOMIC); 4325 if (mem == NULL) 4326 return -1; 4327 4328 ioc->ReqToChain = (int *) mem; 4329 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", 4330 ioc->name, mem, sz)); 4331 mem = kmalloc(sz, GFP_ATOMIC); 4332 if (mem == NULL) 4333 return -1; 4334 4335 ioc->RequestNB = (int *) mem; 4336 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", 4337 ioc->name, mem, sz)); 4338 } 4339 for (ii = 0; ii < ioc->req_depth; ii++) { 4340 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; 4341 } 4342 4343 /* ChainToChain size must equal the total number 4344 * of chain buffers to be allocated. 4345 * index = chain_idx 4346 * 4347 * Calculate the number of chain buffers needed(plus 1) per I/O 4348 * then multiply the maximum number of simultaneous cmds 4349 * 4350 * num_sge = num sge in request frame + last chain buffer 4351 * scale = num sge per chain buffer if no chain element 4352 */ 4353 scale = ioc->req_sz / ioc->SGE_size; 4354 if (ioc->sg_addr_size == sizeof(u64)) 4355 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; 4356 else 4357 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; 4358 4359 if (ioc->sg_addr_size == sizeof(u64)) { 4360 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + 4361 (ioc->req_sz - 60) / ioc->SGE_size; 4362 } else { 4363 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + 4364 scale + (ioc->req_sz - 64) / ioc->SGE_size; 4365 } 4366 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", 4367 ioc->name, num_sge, numSGE)); 4368 4369 if (ioc->bus_type == FC) { 4370 if (numSGE > MPT_SCSI_FC_SG_DEPTH) 4371 numSGE = MPT_SCSI_FC_SG_DEPTH; 4372 } else { 4373 if (numSGE > MPT_SCSI_SG_DEPTH) 4374 numSGE = MPT_SCSI_SG_DEPTH; 4375 } 4376 4377 num_chain = 1; 4378 while (numSGE - num_sge > 0) { 4379 num_chain++; 4380 num_sge += (scale - 1); 4381 } 4382 num_chain++; 4383 4384 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", 4385 ioc->name, numSGE, num_sge, num_chain)); 4386 4387 if (ioc->bus_type == SPI) 4388 num_chain *= MPT_SCSI_CAN_QUEUE; 4389 else if (ioc->bus_type == SAS) 4390 num_chain *= MPT_SAS_CAN_QUEUE; 4391 else 4392 num_chain *= MPT_FC_CAN_QUEUE; 4393 4394 ioc->num_chain = num_chain; 4395 4396 sz = num_chain * sizeof(int); 4397 if (ioc->ChainToChain == NULL) { 4398 mem = kmalloc(sz, GFP_ATOMIC); 4399 if (mem == NULL) 4400 return -1; 4401 4402 ioc->ChainToChain = (int *) mem; 4403 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", 4404 ioc->name, mem, sz)); 4405 } else { 4406 mem = (u8 *) ioc->ChainToChain; 4407 } 4408 memset(mem, 0xFF, sz); 4409 return num_chain; 4410 } 4411 4412 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4413 /** 4414 * PrimeIocFifos - Initialize IOC request and reply FIFOs. 4415 * @ioc: Pointer to MPT_ADAPTER structure 4416 * 4417 * This routine allocates memory for the MPT reply and request frame 4418 * pools (if necessary), and primes the IOC reply FIFO with 4419 * reply frames. 4420 * 4421 * Returns 0 for success, non-zero for failure. 4422 */ 4423 static int 4424 PrimeIocFifos(MPT_ADAPTER *ioc) 4425 { 4426 MPT_FRAME_HDR *mf; 4427 unsigned long flags; 4428 dma_addr_t alloc_dma; 4429 u8 *mem; 4430 int i, reply_sz, sz, total_size, num_chain; 4431 u64 dma_mask; 4432 4433 dma_mask = 0; 4434 4435 /* Prime reply FIFO... */ 4436 4437 if (ioc->reply_frames == NULL) { 4438 if ( (num_chain = initChainBuffers(ioc)) < 0) 4439 return -1; 4440 /* 4441 * 1078 errata workaround for the 36GB limitation 4442 */ 4443 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && 4444 ioc->dma_mask > DMA_BIT_MASK(35)) { 4445 if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32)) 4446 && !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) { 4447 dma_mask = DMA_BIT_MASK(35); 4448 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4449 "setting 35 bit addressing for " 4450 "Request/Reply/Chain and Sense Buffers\n", 4451 ioc->name)); 4452 } else { 4453 /*Reseting DMA mask to 64 bit*/ 4454 dma_set_mask(&ioc->pcidev->dev, 4455 DMA_BIT_MASK(64)); 4456 dma_set_coherent_mask(&ioc->pcidev->dev, 4457 DMA_BIT_MASK(64)); 4458 4459 printk(MYIOC_s_ERR_FMT 4460 "failed setting 35 bit addressing for " 4461 "Request/Reply/Chain and Sense Buffers\n", 4462 ioc->name); 4463 return -1; 4464 } 4465 } 4466 4467 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); 4468 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", 4469 ioc->name, ioc->reply_sz, ioc->reply_depth)); 4470 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", 4471 ioc->name, reply_sz, reply_sz)); 4472 4473 sz = (ioc->req_sz * ioc->req_depth); 4474 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", 4475 ioc->name, ioc->req_sz, ioc->req_depth)); 4476 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", 4477 ioc->name, sz, sz)); 4478 total_size += sz; 4479 4480 sz = num_chain * ioc->req_sz; /* chain buffer pool size */ 4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", 4482 ioc->name, ioc->req_sz, num_chain)); 4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", 4484 ioc->name, sz, sz, num_chain)); 4485 4486 total_size += sz; 4487 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size, 4488 &alloc_dma, GFP_KERNEL); 4489 if (mem == NULL) { 4490 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", 4491 ioc->name); 4492 goto out_fail; 4493 } 4494 4495 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", 4496 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); 4497 4498 memset(mem, 0, total_size); 4499 ioc->alloc_total += total_size; 4500 ioc->alloc = mem; 4501 ioc->alloc_dma = alloc_dma; 4502 ioc->alloc_sz = total_size; 4503 ioc->reply_frames = (MPT_FRAME_HDR *) mem; 4504 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4505 4506 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4507 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4508 4509 alloc_dma += reply_sz; 4510 mem += reply_sz; 4511 4512 /* Request FIFO - WE manage this! */ 4513 4514 ioc->req_frames = (MPT_FRAME_HDR *) mem; 4515 ioc->req_frames_dma = alloc_dma; 4516 4517 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", 4518 ioc->name, mem, (void *)(ulong)alloc_dma)); 4519 4520 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4521 4522 for (i = 0; i < ioc->req_depth; i++) { 4523 alloc_dma += ioc->req_sz; 4524 mem += ioc->req_sz; 4525 } 4526 4527 ioc->ChainBuffer = mem; 4528 ioc->ChainBufferDMA = alloc_dma; 4529 4530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", 4531 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); 4532 4533 /* Initialize the free chain Q. 4534 */ 4535 4536 INIT_LIST_HEAD(&ioc->FreeChainQ); 4537 4538 /* Post the chain buffers to the FreeChainQ. 4539 */ 4540 mem = (u8 *)ioc->ChainBuffer; 4541 for (i=0; i < num_chain; i++) { 4542 mf = (MPT_FRAME_HDR *) mem; 4543 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); 4544 mem += ioc->req_sz; 4545 } 4546 4547 /* Initialize Request frames linked list 4548 */ 4549 alloc_dma = ioc->req_frames_dma; 4550 mem = (u8 *) ioc->req_frames; 4551 4552 spin_lock_irqsave(&ioc->FreeQlock, flags); 4553 INIT_LIST_HEAD(&ioc->FreeQ); 4554 for (i = 0; i < ioc->req_depth; i++) { 4555 mf = (MPT_FRAME_HDR *) mem; 4556 4557 /* Queue REQUESTs *internally*! */ 4558 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); 4559 4560 mem += ioc->req_sz; 4561 } 4562 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 4563 4564 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4565 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz, 4566 &ioc->sense_buf_pool_dma, GFP_KERNEL); 4567 if (ioc->sense_buf_pool == NULL) { 4568 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", 4569 ioc->name); 4570 goto out_fail; 4571 } 4572 4573 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); 4574 ioc->alloc_total += sz; 4575 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", 4576 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); 4577 4578 } 4579 4580 /* Post Reply frames to FIFO 4581 */ 4582 alloc_dma = ioc->alloc_dma; 4583 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4584 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4585 4586 for (i = 0; i < ioc->reply_depth; i++) { 4587 /* Write each address to the IOC! */ 4588 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); 4589 alloc_dma += ioc->reply_sz; 4590 } 4591 4592 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, 4593 ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev, 4594 ioc->dma_mask)) 4595 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4596 "restoring 64 bit addressing\n", ioc->name)); 4597 4598 return 0; 4599 4600 out_fail: 4601 4602 if (ioc->alloc != NULL) { 4603 sz = ioc->alloc_sz; 4604 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, 4605 ioc->alloc_dma); 4606 ioc->reply_frames = NULL; 4607 ioc->req_frames = NULL; 4608 ioc->alloc_total -= sz; 4609 } 4610 if (ioc->sense_buf_pool != NULL) { 4611 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4612 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, 4613 ioc->sense_buf_pool_dma); 4614 ioc->sense_buf_pool = NULL; 4615 } 4616 4617 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, 4618 DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev, 4619 DMA_BIT_MASK(64))) 4620 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4621 "restoring 64 bit addressing\n", ioc->name)); 4622 4623 return -1; 4624 } 4625 4626 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4627 /** 4628 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply 4629 * from IOC via doorbell handshake method. 4630 * @ioc: Pointer to MPT_ADAPTER structure 4631 * @reqBytes: Size of the request in bytes 4632 * @req: Pointer to MPT request frame 4633 * @replyBytes: Expected size of the reply in bytes 4634 * @u16reply: Pointer to area where reply should be written 4635 * @maxwait: Max wait time for a reply (in seconds) 4636 * @sleepFlag: Specifies whether the process can sleep 4637 * 4638 * NOTES: It is the callers responsibility to byte-swap fields in the 4639 * request which are greater than 1 byte in size. It is also the 4640 * callers responsibility to byte-swap response fields which are 4641 * greater than 1 byte in size. 4642 * 4643 * Returns 0 for success, non-zero for failure. 4644 */ 4645 static int 4646 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, 4647 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) 4648 { 4649 MPIDefaultReply_t *mptReply; 4650 int failcnt = 0; 4651 int t; 4652 4653 /* 4654 * Get ready to cache a handshake reply 4655 */ 4656 ioc->hs_reply_idx = 0; 4657 mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4658 mptReply->MsgLength = 0; 4659 4660 /* 4661 * Make sure there are no doorbells (WRITE 0 to IntStatus reg), 4662 * then tell IOC that we want to handshake a request of N words. 4663 * (WRITE u32val to Doorbell reg). 4664 */ 4665 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4666 CHIPREG_WRITE32(&ioc->chip->Doorbell, 4667 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 4668 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 4669 4670 /* 4671 * Wait for IOC's doorbell handshake int 4672 */ 4673 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4674 failcnt++; 4675 4676 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", 4677 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4678 4679 /* Read doorbell and check for active bit */ 4680 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 4681 return -1; 4682 4683 /* 4684 * Clear doorbell int (WRITE 0 to IntStatus reg), 4685 * then wait for IOC to ACKnowledge that it's ready for 4686 * our handshake request. 4687 */ 4688 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4689 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4690 failcnt++; 4691 4692 if (!failcnt) { 4693 int ii; 4694 u8 *req_as_bytes = (u8 *) req; 4695 4696 /* 4697 * Stuff request words via doorbell handshake, 4698 * with ACK from IOC for each. 4699 */ 4700 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { 4701 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | 4702 (req_as_bytes[(ii*4) + 1] << 8) | 4703 (req_as_bytes[(ii*4) + 2] << 16) | 4704 (req_as_bytes[(ii*4) + 3] << 24)); 4705 4706 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 4707 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4708 failcnt++; 4709 } 4710 4711 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); 4712 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); 4713 4714 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", 4715 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); 4716 4717 /* 4718 * Wait for completion of doorbell handshake reply from the IOC 4719 */ 4720 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) 4721 failcnt++; 4722 4723 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", 4724 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); 4725 4726 /* 4727 * Copy out the cached reply... 4728 */ 4729 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) 4730 u16reply[ii] = ioc->hs_reply[ii]; 4731 } else { 4732 return -99; 4733 } 4734 4735 return -failcnt; 4736 } 4737 4738 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4739 /** 4740 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge 4741 * @ioc: Pointer to MPT_ADAPTER structure 4742 * @howlong: How long to wait (in seconds) 4743 * @sleepFlag: Specifies whether the process can sleep 4744 * 4745 * This routine waits (up to ~2 seconds max) for IOC doorbell 4746 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS 4747 * bit in its IntStatus register being clear. 4748 * 4749 * Returns a negative value on failure, else wait loop count. 4750 */ 4751 static int 4752 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4753 { 4754 int cntdn; 4755 int count = 0; 4756 u32 intstat=0; 4757 4758 cntdn = 1000 * howlong; 4759 4760 if (sleepFlag == CAN_SLEEP) { 4761 while (--cntdn) { 4762 msleep (1); 4763 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4764 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4765 break; 4766 count++; 4767 } 4768 } else { 4769 while (--cntdn) { 4770 udelay (1000); 4771 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4772 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4773 break; 4774 count++; 4775 } 4776 } 4777 4778 if (cntdn) { 4779 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", 4780 ioc->name, count)); 4781 return count; 4782 } 4783 4784 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", 4785 ioc->name, count, intstat); 4786 return -1; 4787 } 4788 4789 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4790 /** 4791 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit 4792 * @ioc: Pointer to MPT_ADAPTER structure 4793 * @howlong: How long to wait (in seconds) 4794 * @sleepFlag: Specifies whether the process can sleep 4795 * 4796 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt 4797 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. 4798 * 4799 * Returns a negative value on failure, else wait loop count. 4800 */ 4801 static int 4802 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4803 { 4804 int cntdn; 4805 int count = 0; 4806 u32 intstat=0; 4807 4808 cntdn = 1000 * howlong; 4809 if (sleepFlag == CAN_SLEEP) { 4810 while (--cntdn) { 4811 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4812 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4813 break; 4814 msleep(1); 4815 count++; 4816 } 4817 } else { 4818 while (--cntdn) { 4819 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4820 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4821 break; 4822 udelay (1000); 4823 count++; 4824 } 4825 } 4826 4827 if (cntdn) { 4828 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", 4829 ioc->name, count, howlong)); 4830 return count; 4831 } 4832 4833 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", 4834 ioc->name, count, intstat); 4835 return -1; 4836 } 4837 4838 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4839 /** 4840 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. 4841 * @ioc: Pointer to MPT_ADAPTER structure 4842 * @howlong: How long to wait (in seconds) 4843 * @sleepFlag: Specifies whether the process can sleep 4844 * 4845 * This routine polls the IOC for a handshake reply, 16 bits at a time. 4846 * Reply is cached to IOC private area large enough to hold a maximum 4847 * of 128 bytes of reply data. 4848 * 4849 * Returns a negative value on failure, else size of reply in WORDS. 4850 */ 4851 static int 4852 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4853 { 4854 int u16cnt = 0; 4855 int failcnt = 0; 4856 int t; 4857 u16 *hs_reply = ioc->hs_reply; 4858 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4859 u16 hword; 4860 4861 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; 4862 4863 /* 4864 * Get first two u16's so we can look at IOC's intended reply MsgLength 4865 */ 4866 u16cnt=0; 4867 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { 4868 failcnt++; 4869 } else { 4870 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4871 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4872 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4873 failcnt++; 4874 else { 4875 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4876 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4877 } 4878 } 4879 4880 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", 4881 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), 4882 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4883 4884 /* 4885 * If no error (and IOC said MsgLength is > 0), piece together 4886 * reply 16 bits at a time. 4887 */ 4888 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { 4889 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4890 failcnt++; 4891 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4892 /* don't overflow our IOC hs_reply[] buffer! */ 4893 if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) 4894 hs_reply[u16cnt] = hword; 4895 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4896 } 4897 4898 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4899 failcnt++; 4900 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4901 4902 if (failcnt) { 4903 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", 4904 ioc->name); 4905 return -failcnt; 4906 } 4907 #if 0 4908 else if (u16cnt != (2 * mptReply->MsgLength)) { 4909 return -101; 4910 } 4911 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 4912 return -102; 4913 } 4914 #endif 4915 4916 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); 4917 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); 4918 4919 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", 4920 ioc->name, t, u16cnt/2)); 4921 return u16cnt/2; 4922 } 4923 4924 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4925 /** 4926 * GetLanConfigPages - Fetch LANConfig pages. 4927 * @ioc: Pointer to MPT_ADAPTER structure 4928 * 4929 * Return: 0 for success 4930 * -ENOMEM if no memory available 4931 * -EPERM if not allowed due to ISR context 4932 * -EAGAIN if no msg frames currently available 4933 * -EFAULT for non-successful reply or no reply (timeout) 4934 */ 4935 static int 4936 GetLanConfigPages(MPT_ADAPTER *ioc) 4937 { 4938 ConfigPageHeader_t hdr; 4939 CONFIGPARMS cfg; 4940 LANPage0_t *ppage0_alloc; 4941 dma_addr_t page0_dma; 4942 LANPage1_t *ppage1_alloc; 4943 dma_addr_t page1_dma; 4944 int rc = 0; 4945 int data_sz; 4946 int copy_sz; 4947 4948 /* Get LAN Page 0 header */ 4949 hdr.PageVersion = 0; 4950 hdr.PageLength = 0; 4951 hdr.PageNumber = 0; 4952 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 4953 cfg.cfghdr.hdr = &hdr; 4954 cfg.physAddr = -1; 4955 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 4956 cfg.dir = 0; 4957 cfg.pageAddr = 0; 4958 cfg.timeout = 0; 4959 4960 if ((rc = mpt_config(ioc, &cfg)) != 0) 4961 return rc; 4962 4963 if (hdr.PageLength > 0) { 4964 data_sz = hdr.PageLength * 4; 4965 ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 4966 &page0_dma, GFP_KERNEL); 4967 rc = -ENOMEM; 4968 if (ppage0_alloc) { 4969 memset((u8 *)ppage0_alloc, 0, data_sz); 4970 cfg.physAddr = page0_dma; 4971 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 4972 4973 if ((rc = mpt_config(ioc, &cfg)) == 0) { 4974 /* save the data */ 4975 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); 4976 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); 4977 4978 } 4979 4980 dma_free_coherent(&ioc->pcidev->dev, data_sz, 4981 (u8 *)ppage0_alloc, page0_dma); 4982 4983 /* FIXME! 4984 * Normalize endianness of structure data, 4985 * by byte-swapping all > 1 byte fields! 4986 */ 4987 4988 } 4989 4990 if (rc) 4991 return rc; 4992 } 4993 4994 /* Get LAN Page 1 header */ 4995 hdr.PageVersion = 0; 4996 hdr.PageLength = 0; 4997 hdr.PageNumber = 1; 4998 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 4999 cfg.cfghdr.hdr = &hdr; 5000 cfg.physAddr = -1; 5001 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5002 cfg.dir = 0; 5003 cfg.pageAddr = 0; 5004 5005 if ((rc = mpt_config(ioc, &cfg)) != 0) 5006 return rc; 5007 5008 if (hdr.PageLength == 0) 5009 return 0; 5010 5011 data_sz = hdr.PageLength * 4; 5012 rc = -ENOMEM; 5013 ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 5014 &page1_dma, GFP_KERNEL); 5015 if (ppage1_alloc) { 5016 memset((u8 *)ppage1_alloc, 0, data_sz); 5017 cfg.physAddr = page1_dma; 5018 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5019 5020 if ((rc = mpt_config(ioc, &cfg)) == 0) { 5021 /* save the data */ 5022 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); 5023 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); 5024 } 5025 5026 dma_free_coherent(&ioc->pcidev->dev, data_sz, 5027 (u8 *)ppage1_alloc, page1_dma); 5028 5029 /* FIXME! 5030 * Normalize endianness of structure data, 5031 * by byte-swapping all > 1 byte fields! 5032 */ 5033 5034 } 5035 5036 return rc; 5037 } 5038 5039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5040 /** 5041 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table 5042 * @ioc: Pointer to MPT_ADAPTER structure 5043 * @persist_opcode: see below 5044 * 5045 * =============================== ====================================== 5046 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for 5047 * devices not currently present. 5048 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings 5049 * =============================== ====================================== 5050 * 5051 * NOTE: Don't use not this function during interrupt time. 5052 * 5053 * Returns 0 for success, non-zero error 5054 */ 5055 5056 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5057 int 5058 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) 5059 { 5060 SasIoUnitControlRequest_t *sasIoUnitCntrReq; 5061 SasIoUnitControlReply_t *sasIoUnitCntrReply; 5062 MPT_FRAME_HDR *mf = NULL; 5063 MPIHeader_t *mpi_hdr; 5064 int ret = 0; 5065 unsigned long timeleft; 5066 5067 mutex_lock(&ioc->mptbase_cmds.mutex); 5068 5069 /* init the internal cmd struct */ 5070 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 5071 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 5072 5073 /* insure garbage is not sent to fw */ 5074 switch(persist_opcode) { 5075 5076 case MPI_SAS_OP_CLEAR_NOT_PRESENT: 5077 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: 5078 break; 5079 5080 default: 5081 ret = -1; 5082 goto out; 5083 } 5084 5085 printk(KERN_DEBUG "%s: persist_opcode=%x\n", 5086 __func__, persist_opcode); 5087 5088 /* Get a MF for this command. 5089 */ 5090 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 5091 printk(KERN_DEBUG "%s: no msg frames!\n", __func__); 5092 ret = -1; 5093 goto out; 5094 } 5095 5096 mpi_hdr = (MPIHeader_t *) mf; 5097 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; 5098 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); 5099 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; 5100 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; 5101 sasIoUnitCntrReq->Operation = persist_opcode; 5102 5103 mpt_put_msg_frame(mpt_base_index, ioc, mf); 5104 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); 5105 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 5106 ret = -ETIME; 5107 printk(KERN_DEBUG "%s: failed\n", __func__); 5108 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 5109 goto out; 5110 if (!timeleft) { 5111 printk(MYIOC_s_WARN_FMT 5112 "Issuing Reset from %s!!, doorbell=0x%08x\n", 5113 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 5114 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 5115 mpt_free_msg_frame(ioc, mf); 5116 } 5117 goto out; 5118 } 5119 5120 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 5121 ret = -1; 5122 goto out; 5123 } 5124 5125 sasIoUnitCntrReply = 5126 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; 5127 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { 5128 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", 5129 __func__, sasIoUnitCntrReply->IOCStatus, 5130 sasIoUnitCntrReply->IOCLogInfo); 5131 printk(KERN_DEBUG "%s: failed\n", __func__); 5132 ret = -1; 5133 } else 5134 printk(KERN_DEBUG "%s: success\n", __func__); 5135 out: 5136 5137 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 5138 mutex_unlock(&ioc->mptbase_cmds.mutex); 5139 return ret; 5140 } 5141 5142 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5143 5144 static void 5145 mptbase_raid_process_event_data(MPT_ADAPTER *ioc, 5146 MpiEventDataRaid_t * pRaidEventData) 5147 { 5148 int volume; 5149 int reason; 5150 int disk; 5151 int status; 5152 int flags; 5153 int state; 5154 5155 volume = pRaidEventData->VolumeID; 5156 reason = pRaidEventData->ReasonCode; 5157 disk = pRaidEventData->PhysDiskNum; 5158 status = le32_to_cpu(pRaidEventData->SettingsStatus); 5159 flags = (status >> 0) & 0xff; 5160 state = (status >> 8) & 0xff; 5161 5162 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { 5163 return; 5164 } 5165 5166 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && 5167 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || 5168 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { 5169 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", 5170 ioc->name, disk, volume); 5171 } else { 5172 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", 5173 ioc->name, volume); 5174 } 5175 5176 switch(reason) { 5177 case MPI_EVENT_RAID_RC_VOLUME_CREATED: 5178 printk(MYIOC_s_INFO_FMT " volume has been created\n", 5179 ioc->name); 5180 break; 5181 5182 case MPI_EVENT_RAID_RC_VOLUME_DELETED: 5183 5184 printk(MYIOC_s_INFO_FMT " volume has been deleted\n", 5185 ioc->name); 5186 break; 5187 5188 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: 5189 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", 5190 ioc->name); 5191 break; 5192 5193 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: 5194 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", 5195 ioc->name, 5196 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 5197 ? "optimal" 5198 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED 5199 ? "degraded" 5200 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED 5201 ? "failed" 5202 : "state unknown", 5203 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED 5204 ? ", enabled" : "", 5205 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 5206 ? ", quiesced" : "", 5207 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 5208 ? ", resync in progress" : "" ); 5209 break; 5210 5211 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: 5212 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", 5213 ioc->name, disk); 5214 break; 5215 5216 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: 5217 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", 5218 ioc->name); 5219 break; 5220 5221 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: 5222 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", 5223 ioc->name); 5224 break; 5225 5226 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: 5227 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", 5228 ioc->name); 5229 break; 5230 5231 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: 5232 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", 5233 ioc->name, 5234 state == MPI_PHYSDISK0_STATUS_ONLINE 5235 ? "online" 5236 : state == MPI_PHYSDISK0_STATUS_MISSING 5237 ? "missing" 5238 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 5239 ? "not compatible" 5240 : state == MPI_PHYSDISK0_STATUS_FAILED 5241 ? "failed" 5242 : state == MPI_PHYSDISK0_STATUS_INITIALIZING 5243 ? "initializing" 5244 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 5245 ? "offline requested" 5246 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 5247 ? "failed requested" 5248 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 5249 ? "offline" 5250 : "state unknown", 5251 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 5252 ? ", out of sync" : "", 5253 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 5254 ? ", quiesced" : "" ); 5255 break; 5256 5257 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: 5258 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", 5259 ioc->name, disk); 5260 break; 5261 5262 case MPI_EVENT_RAID_RC_SMART_DATA: 5263 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", 5264 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); 5265 break; 5266 5267 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: 5268 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", 5269 ioc->name, disk); 5270 break; 5271 } 5272 } 5273 5274 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5275 /** 5276 * GetIoUnitPage2 - Retrieve BIOS version and boot order information. 5277 * @ioc: Pointer to MPT_ADAPTER structure 5278 * 5279 * Returns: 0 for success 5280 * -ENOMEM if no memory available 5281 * -EPERM if not allowed due to ISR context 5282 * -EAGAIN if no msg frames currently available 5283 * -EFAULT for non-successful reply or no reply (timeout) 5284 */ 5285 static int 5286 GetIoUnitPage2(MPT_ADAPTER *ioc) 5287 { 5288 ConfigPageHeader_t hdr; 5289 CONFIGPARMS cfg; 5290 IOUnitPage2_t *ppage_alloc; 5291 dma_addr_t page_dma; 5292 int data_sz; 5293 int rc; 5294 5295 /* Get the page header */ 5296 hdr.PageVersion = 0; 5297 hdr.PageLength = 0; 5298 hdr.PageNumber = 2; 5299 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; 5300 cfg.cfghdr.hdr = &hdr; 5301 cfg.physAddr = -1; 5302 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5303 cfg.dir = 0; 5304 cfg.pageAddr = 0; 5305 cfg.timeout = 0; 5306 5307 if ((rc = mpt_config(ioc, &cfg)) != 0) 5308 return rc; 5309 5310 if (hdr.PageLength == 0) 5311 return 0; 5312 5313 /* Read the config page */ 5314 data_sz = hdr.PageLength * 4; 5315 rc = -ENOMEM; 5316 ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 5317 &page_dma, GFP_KERNEL); 5318 if (ppage_alloc) { 5319 memset((u8 *)ppage_alloc, 0, data_sz); 5320 cfg.physAddr = page_dma; 5321 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5322 5323 /* If Good, save data */ 5324 if ((rc = mpt_config(ioc, &cfg)) == 0) 5325 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); 5326 5327 dma_free_coherent(&ioc->pcidev->dev, data_sz, 5328 (u8 *)ppage_alloc, page_dma); 5329 } 5330 5331 return rc; 5332 } 5333 5334 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5335 /** 5336 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 5337 * @ioc: Pointer to a Adapter Strucutre 5338 * @portnum: IOC port number 5339 * 5340 * Return: -EFAULT if read of config page header fails 5341 * or if no nvram 5342 * If read of SCSI Port Page 0 fails, 5343 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5344 * Adapter settings: async, narrow 5345 * Return 1 5346 * If read of SCSI Port Page 2 fails, 5347 * Adapter settings valid 5348 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5349 * Return 1 5350 * Else 5351 * Both valid 5352 * Return 0 5353 * CHECK - what type of locking mechanisms should be used???? 5354 */ 5355 static int 5356 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) 5357 { 5358 u8 *pbuf; 5359 dma_addr_t buf_dma; 5360 CONFIGPARMS cfg; 5361 ConfigPageHeader_t header; 5362 int ii; 5363 int data, rc = 0; 5364 5365 /* Allocate memory 5366 */ 5367 if (!ioc->spi_data.nvram) { 5368 int sz; 5369 u8 *mem; 5370 sz = MPT_MAX_SCSI_DEVICES * sizeof(int); 5371 mem = kmalloc(sz, GFP_ATOMIC); 5372 if (mem == NULL) 5373 return -EFAULT; 5374 5375 ioc->spi_data.nvram = (int *) mem; 5376 5377 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", 5378 ioc->name, ioc->spi_data.nvram, sz)); 5379 } 5380 5381 /* Invalidate NVRAM information 5382 */ 5383 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5384 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; 5385 } 5386 5387 /* Read SPP0 header, allocate memory, then read page. 5388 */ 5389 header.PageVersion = 0; 5390 header.PageLength = 0; 5391 header.PageNumber = 0; 5392 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5393 cfg.cfghdr.hdr = &header; 5394 cfg.physAddr = -1; 5395 cfg.pageAddr = portnum; 5396 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5397 cfg.dir = 0; 5398 cfg.timeout = 0; /* use default */ 5399 if (mpt_config(ioc, &cfg) != 0) 5400 return -EFAULT; 5401 5402 if (header.PageLength > 0) { 5403 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, 5404 header.PageLength * 4, &buf_dma, 5405 GFP_KERNEL); 5406 if (pbuf) { 5407 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5408 cfg.physAddr = buf_dma; 5409 if (mpt_config(ioc, &cfg) != 0) { 5410 ioc->spi_data.maxBusWidth = MPT_NARROW; 5411 ioc->spi_data.maxSyncOffset = 0; 5412 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5413 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; 5414 rc = 1; 5415 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5416 "Unable to read PortPage0 minSyncFactor=%x\n", 5417 ioc->name, ioc->spi_data.minSyncFactor)); 5418 } else { 5419 /* Save the Port Page 0 data 5420 */ 5421 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; 5422 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); 5423 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); 5424 5425 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { 5426 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; 5427 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5428 "noQas due to Capabilities=%x\n", 5429 ioc->name, pPP0->Capabilities)); 5430 } 5431 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; 5432 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; 5433 if (data) { 5434 ioc->spi_data.maxSyncOffset = (u8) (data >> 16); 5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; 5436 ioc->spi_data.minSyncFactor = (u8) (data >> 8); 5437 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5438 "PortPage0 minSyncFactor=%x\n", 5439 ioc->name, ioc->spi_data.minSyncFactor)); 5440 } else { 5441 ioc->spi_data.maxSyncOffset = 0; 5442 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5443 } 5444 5445 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; 5446 5447 /* Update the minSyncFactor based on bus type. 5448 */ 5449 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || 5450 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { 5451 5452 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { 5453 ioc->spi_data.minSyncFactor = MPT_ULTRA; 5454 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5455 "HVD or SE detected, minSyncFactor=%x\n", 5456 ioc->name, ioc->spi_data.minSyncFactor)); 5457 } 5458 } 5459 } 5460 if (pbuf) { 5461 dma_free_coherent(&ioc->pcidev->dev, 5462 header.PageLength * 4, pbuf, 5463 buf_dma); 5464 } 5465 } 5466 } 5467 5468 /* SCSI Port Page 2 - Read the header then the page. 5469 */ 5470 header.PageVersion = 0; 5471 header.PageLength = 0; 5472 header.PageNumber = 2; 5473 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5474 cfg.cfghdr.hdr = &header; 5475 cfg.physAddr = -1; 5476 cfg.pageAddr = portnum; 5477 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5478 cfg.dir = 0; 5479 if (mpt_config(ioc, &cfg) != 0) 5480 return -EFAULT; 5481 5482 if (header.PageLength > 0) { 5483 /* Allocate memory and read SCSI Port Page 2 5484 */ 5485 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, 5486 header.PageLength * 4, &buf_dma, 5487 GFP_KERNEL); 5488 if (pbuf) { 5489 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; 5490 cfg.physAddr = buf_dma; 5491 if (mpt_config(ioc, &cfg) != 0) { 5492 /* Nvram data is left with INVALID mark 5493 */ 5494 rc = 1; 5495 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { 5496 5497 /* This is an ATTO adapter, read Page2 accordingly 5498 */ 5499 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; 5500 ATTODeviceInfo_t *pdevice = NULL; 5501 u16 ATTOFlags; 5502 5503 /* Save the Port Page 2 data 5504 * (reformat into a 32bit quantity) 5505 */ 5506 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5507 pdevice = &pPP2->DeviceSettings[ii]; 5508 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); 5509 data = 0; 5510 5511 /* Translate ATTO device flags to LSI format 5512 */ 5513 if (ATTOFlags & ATTOFLAG_DISC) 5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); 5515 if (ATTOFlags & ATTOFLAG_ID_ENB) 5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); 5517 if (ATTOFlags & ATTOFLAG_LUN_ENB) 5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); 5519 if (ATTOFlags & ATTOFLAG_TAGGED) 5520 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); 5521 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) 5522 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); 5523 5524 data = (data << 16) | (pdevice->Period << 8) | 10; 5525 ioc->spi_data.nvram[ii] = data; 5526 } 5527 } else { 5528 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; 5529 MpiDeviceInfo_t *pdevice = NULL; 5530 5531 /* 5532 * Save "Set to Avoid SCSI Bus Resets" flag 5533 */ 5534 ioc->spi_data.bus_reset = 5535 (le32_to_cpu(pPP2->PortFlags) & 5536 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? 5537 0 : 1 ; 5538 5539 /* Save the Port Page 2 data 5540 * (reformat into a 32bit quantity) 5541 */ 5542 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; 5543 ioc->spi_data.PortFlags = data; 5544 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5545 pdevice = &pPP2->DeviceSettings[ii]; 5546 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | 5547 (pdevice->SyncFactor << 8) | pdevice->Timeout; 5548 ioc->spi_data.nvram[ii] = data; 5549 } 5550 } 5551 5552 dma_free_coherent(&ioc->pcidev->dev, 5553 header.PageLength * 4, pbuf, 5554 buf_dma); 5555 } 5556 } 5557 5558 /* Update Adapter limits with those from NVRAM 5559 * Comment: Don't need to do this. Target performance 5560 * parameters will never exceed the adapters limits. 5561 */ 5562 5563 return rc; 5564 } 5565 5566 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5567 /** 5568 * mpt_readScsiDevicePageHeaders - save version and length of SDP1 5569 * @ioc: Pointer to a Adapter Strucutre 5570 * @portnum: IOC port number 5571 * 5572 * Return: -EFAULT if read of config page header fails 5573 * or 0 if success. 5574 */ 5575 static int 5576 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) 5577 { 5578 CONFIGPARMS cfg; 5579 ConfigPageHeader_t header; 5580 5581 /* Read the SCSI Device Page 1 header 5582 */ 5583 header.PageVersion = 0; 5584 header.PageLength = 0; 5585 header.PageNumber = 1; 5586 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5587 cfg.cfghdr.hdr = &header; 5588 cfg.physAddr = -1; 5589 cfg.pageAddr = portnum; 5590 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5591 cfg.dir = 0; 5592 cfg.timeout = 0; 5593 if (mpt_config(ioc, &cfg) != 0) 5594 return -EFAULT; 5595 5596 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; 5597 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; 5598 5599 header.PageVersion = 0; 5600 header.PageLength = 0; 5601 header.PageNumber = 0; 5602 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5603 if (mpt_config(ioc, &cfg) != 0) 5604 return -EFAULT; 5605 5606 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; 5607 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; 5608 5609 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", 5610 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); 5611 5612 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", 5613 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); 5614 return 0; 5615 } 5616 5617 /** 5618 * mpt_inactive_raid_list_free - This clears this link list. 5619 * @ioc : pointer to per adapter structure 5620 **/ 5621 static void 5622 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) 5623 { 5624 struct inactive_raid_component_info *component_info, *pNext; 5625 5626 if (list_empty(&ioc->raid_data.inactive_list)) 5627 return; 5628 5629 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5630 list_for_each_entry_safe(component_info, pNext, 5631 &ioc->raid_data.inactive_list, list) { 5632 list_del(&component_info->list); 5633 kfree(component_info); 5634 } 5635 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5636 } 5637 5638 /** 5639 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume 5640 * 5641 * @ioc : pointer to per adapter structure 5642 * @channel : volume channel 5643 * @id : volume target id 5644 **/ 5645 static void 5646 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) 5647 { 5648 CONFIGPARMS cfg; 5649 ConfigPageHeader_t hdr; 5650 dma_addr_t dma_handle; 5651 pRaidVolumePage0_t buffer = NULL; 5652 int i; 5653 RaidPhysDiskPage0_t phys_disk; 5654 struct inactive_raid_component_info *component_info; 5655 int handle_inactive_volumes; 5656 5657 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5658 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5659 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 5660 cfg.pageAddr = (channel << 8) + id; 5661 cfg.cfghdr.hdr = &hdr; 5662 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5663 5664 if (mpt_config(ioc, &cfg) != 0) 5665 goto out; 5666 5667 if (!hdr.PageLength) 5668 goto out; 5669 5670 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5671 &dma_handle, GFP_KERNEL); 5672 5673 if (!buffer) 5674 goto out; 5675 5676 cfg.physAddr = dma_handle; 5677 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5678 5679 if (mpt_config(ioc, &cfg) != 0) 5680 goto out; 5681 5682 if (!buffer->NumPhysDisks) 5683 goto out; 5684 5685 handle_inactive_volumes = 5686 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || 5687 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || 5688 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || 5689 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; 5690 5691 if (!handle_inactive_volumes) 5692 goto out; 5693 5694 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5695 for (i = 0; i < buffer->NumPhysDisks; i++) { 5696 if(mpt_raid_phys_disk_pg0(ioc, 5697 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 5698 continue; 5699 5700 if ((component_info = kmalloc(sizeof (*component_info), 5701 GFP_KERNEL)) == NULL) 5702 continue; 5703 5704 component_info->volumeID = id; 5705 component_info->volumeBus = channel; 5706 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; 5707 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; 5708 component_info->d.PhysDiskID = phys_disk.PhysDiskID; 5709 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; 5710 5711 list_add_tail(&component_info->list, 5712 &ioc->raid_data.inactive_list); 5713 } 5714 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5715 5716 out: 5717 if (buffer) 5718 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5719 buffer, dma_handle); 5720 } 5721 5722 /** 5723 * mpt_raid_phys_disk_pg0 - returns phys disk page zero 5724 * @ioc: Pointer to a Adapter Structure 5725 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5726 * @phys_disk: requested payload data returned 5727 * 5728 * Return: 5729 * 0 on success 5730 * -EFAULT if read of config page header fails or data pointer not NULL 5731 * -ENOMEM if pci_alloc failed 5732 **/ 5733 int 5734 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, 5735 RaidPhysDiskPage0_t *phys_disk) 5736 { 5737 CONFIGPARMS cfg; 5738 ConfigPageHeader_t hdr; 5739 dma_addr_t dma_handle; 5740 pRaidPhysDiskPage0_t buffer = NULL; 5741 int rc; 5742 5743 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5744 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5745 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); 5746 5747 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; 5748 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5749 cfg.cfghdr.hdr = &hdr; 5750 cfg.physAddr = -1; 5751 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5752 5753 if (mpt_config(ioc, &cfg) != 0) { 5754 rc = -EFAULT; 5755 goto out; 5756 } 5757 5758 if (!hdr.PageLength) { 5759 rc = -EFAULT; 5760 goto out; 5761 } 5762 5763 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5764 &dma_handle, GFP_KERNEL); 5765 5766 if (!buffer) { 5767 rc = -ENOMEM; 5768 goto out; 5769 } 5770 5771 cfg.physAddr = dma_handle; 5772 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5773 cfg.pageAddr = phys_disk_num; 5774 5775 if (mpt_config(ioc, &cfg) != 0) { 5776 rc = -EFAULT; 5777 goto out; 5778 } 5779 5780 rc = 0; 5781 memcpy(phys_disk, buffer, sizeof(*buffer)); 5782 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); 5783 5784 out: 5785 5786 if (buffer) 5787 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5788 buffer, dma_handle); 5789 5790 return rc; 5791 } 5792 5793 /** 5794 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num 5795 * @ioc: Pointer to a Adapter Structure 5796 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5797 * 5798 * Return: 5799 * returns number paths 5800 **/ 5801 int 5802 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) 5803 { 5804 CONFIGPARMS cfg; 5805 ConfigPageHeader_t hdr; 5806 dma_addr_t dma_handle; 5807 pRaidPhysDiskPage1_t buffer = NULL; 5808 int rc; 5809 5810 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5811 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5812 5813 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5814 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5815 hdr.PageNumber = 1; 5816 cfg.cfghdr.hdr = &hdr; 5817 cfg.physAddr = -1; 5818 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5819 5820 if (mpt_config(ioc, &cfg) != 0) { 5821 rc = 0; 5822 goto out; 5823 } 5824 5825 if (!hdr.PageLength) { 5826 rc = 0; 5827 goto out; 5828 } 5829 5830 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5831 &dma_handle, GFP_KERNEL); 5832 5833 if (!buffer) { 5834 rc = 0; 5835 goto out; 5836 } 5837 5838 cfg.physAddr = dma_handle; 5839 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5840 cfg.pageAddr = phys_disk_num; 5841 5842 if (mpt_config(ioc, &cfg) != 0) { 5843 rc = 0; 5844 goto out; 5845 } 5846 5847 rc = buffer->NumPhysDiskPaths; 5848 out: 5849 5850 if (buffer) 5851 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5852 buffer, dma_handle); 5853 5854 return rc; 5855 } 5856 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); 5857 5858 /** 5859 * mpt_raid_phys_disk_pg1 - returns phys disk page 1 5860 * @ioc: Pointer to a Adapter Structure 5861 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5862 * @phys_disk: requested payload data returned 5863 * 5864 * Return: 5865 * 0 on success 5866 * -EFAULT if read of config page header fails or data pointer not NULL 5867 * -ENOMEM if pci_alloc failed 5868 **/ 5869 int 5870 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, 5871 RaidPhysDiskPage1_t *phys_disk) 5872 { 5873 CONFIGPARMS cfg; 5874 ConfigPageHeader_t hdr; 5875 dma_addr_t dma_handle; 5876 pRaidPhysDiskPage1_t buffer = NULL; 5877 int rc; 5878 int i; 5879 __le64 sas_address; 5880 5881 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5882 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5883 rc = 0; 5884 5885 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5886 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5887 hdr.PageNumber = 1; 5888 cfg.cfghdr.hdr = &hdr; 5889 cfg.physAddr = -1; 5890 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5891 5892 if (mpt_config(ioc, &cfg) != 0) { 5893 rc = -EFAULT; 5894 goto out; 5895 } 5896 5897 if (!hdr.PageLength) { 5898 rc = -EFAULT; 5899 goto out; 5900 } 5901 5902 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5903 &dma_handle, GFP_KERNEL); 5904 5905 if (!buffer) { 5906 rc = -ENOMEM; 5907 goto out; 5908 } 5909 5910 cfg.physAddr = dma_handle; 5911 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5912 cfg.pageAddr = phys_disk_num; 5913 5914 if (mpt_config(ioc, &cfg) != 0) { 5915 rc = -EFAULT; 5916 goto out; 5917 } 5918 5919 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; 5920 phys_disk->PhysDiskNum = phys_disk_num; 5921 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { 5922 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; 5923 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; 5924 phys_disk->Path[i].OwnerIdentifier = 5925 buffer->Path[i].OwnerIdentifier; 5926 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); 5927 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); 5928 sas_address = le64_to_cpu(sas_address); 5929 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); 5930 memcpy(&sas_address, 5931 &buffer->Path[i].OwnerWWID, sizeof(__le64)); 5932 sas_address = le64_to_cpu(sas_address); 5933 memcpy(&phys_disk->Path[i].OwnerWWID, 5934 &sas_address, sizeof(__le64)); 5935 } 5936 5937 out: 5938 5939 if (buffer) 5940 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5941 buffer, dma_handle); 5942 5943 return rc; 5944 } 5945 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); 5946 5947 5948 /** 5949 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes 5950 * @ioc: Pointer to a Adapter Strucutre 5951 * 5952 * Return: 5953 * 0 on success 5954 * -EFAULT if read of config page header fails or data pointer not NULL 5955 * -ENOMEM if pci_alloc failed 5956 **/ 5957 int 5958 mpt_findImVolumes(MPT_ADAPTER *ioc) 5959 { 5960 IOCPage2_t *pIoc2; 5961 u8 *mem; 5962 dma_addr_t ioc2_dma; 5963 CONFIGPARMS cfg; 5964 ConfigPageHeader_t header; 5965 int rc = 0; 5966 int iocpage2sz; 5967 int i; 5968 5969 if (!ioc->ir_firmware) 5970 return 0; 5971 5972 /* Free the old page 5973 */ 5974 kfree(ioc->raid_data.pIocPg2); 5975 ioc->raid_data.pIocPg2 = NULL; 5976 mpt_inactive_raid_list_free(ioc); 5977 5978 /* Read IOCP2 header then the page. 5979 */ 5980 header.PageVersion = 0; 5981 header.PageLength = 0; 5982 header.PageNumber = 2; 5983 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 5984 cfg.cfghdr.hdr = &header; 5985 cfg.physAddr = -1; 5986 cfg.pageAddr = 0; 5987 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5988 cfg.dir = 0; 5989 cfg.timeout = 0; 5990 if (mpt_config(ioc, &cfg) != 0) 5991 return -EFAULT; 5992 5993 if (header.PageLength == 0) 5994 return -EFAULT; 5995 5996 iocpage2sz = header.PageLength * 4; 5997 pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma, 5998 GFP_KERNEL); 5999 if (!pIoc2) 6000 return -ENOMEM; 6001 6002 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6003 cfg.physAddr = ioc2_dma; 6004 if (mpt_config(ioc, &cfg) != 0) 6005 goto out; 6006 6007 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL); 6008 if (!mem) { 6009 rc = -ENOMEM; 6010 goto out; 6011 } 6012 6013 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; 6014 6015 mpt_read_ioc_pg_3(ioc); 6016 6017 for (i = 0; i < pIoc2->NumActiveVolumes ; i++) 6018 mpt_inactive_raid_volumes(ioc, 6019 pIoc2->RaidVolume[i].VolumeBus, 6020 pIoc2->RaidVolume[i].VolumeID); 6021 6022 out: 6023 dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma); 6024 6025 return rc; 6026 } 6027 6028 static int 6029 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) 6030 { 6031 IOCPage3_t *pIoc3; 6032 u8 *mem; 6033 CONFIGPARMS cfg; 6034 ConfigPageHeader_t header; 6035 dma_addr_t ioc3_dma; 6036 int iocpage3sz = 0; 6037 6038 /* Free the old page 6039 */ 6040 kfree(ioc->raid_data.pIocPg3); 6041 ioc->raid_data.pIocPg3 = NULL; 6042 6043 /* There is at least one physical disk. 6044 * Read and save IOC Page 3 6045 */ 6046 header.PageVersion = 0; 6047 header.PageLength = 0; 6048 header.PageNumber = 3; 6049 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6050 cfg.cfghdr.hdr = &header; 6051 cfg.physAddr = -1; 6052 cfg.pageAddr = 0; 6053 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6054 cfg.dir = 0; 6055 cfg.timeout = 0; 6056 if (mpt_config(ioc, &cfg) != 0) 6057 return 0; 6058 6059 if (header.PageLength == 0) 6060 return 0; 6061 6062 /* Read Header good, alloc memory 6063 */ 6064 iocpage3sz = header.PageLength * 4; 6065 pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma, 6066 GFP_KERNEL); 6067 if (!pIoc3) 6068 return 0; 6069 6070 /* Read the Page and save the data 6071 * into malloc'd memory. 6072 */ 6073 cfg.physAddr = ioc3_dma; 6074 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6075 if (mpt_config(ioc, &cfg) == 0) { 6076 mem = kmalloc(iocpage3sz, GFP_KERNEL); 6077 if (mem) { 6078 memcpy(mem, (u8 *)pIoc3, iocpage3sz); 6079 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; 6080 } 6081 } 6082 6083 dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma); 6084 6085 return 0; 6086 } 6087 6088 static void 6089 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) 6090 { 6091 IOCPage4_t *pIoc4; 6092 CONFIGPARMS cfg; 6093 ConfigPageHeader_t header; 6094 dma_addr_t ioc4_dma; 6095 int iocpage4sz; 6096 6097 /* Read and save IOC Page 4 6098 */ 6099 header.PageVersion = 0; 6100 header.PageLength = 0; 6101 header.PageNumber = 4; 6102 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6103 cfg.cfghdr.hdr = &header; 6104 cfg.physAddr = -1; 6105 cfg.pageAddr = 0; 6106 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6107 cfg.dir = 0; 6108 cfg.timeout = 0; 6109 if (mpt_config(ioc, &cfg) != 0) 6110 return; 6111 6112 if (header.PageLength == 0) 6113 return; 6114 6115 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { 6116 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ 6117 pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz, 6118 &ioc4_dma, GFP_KERNEL); 6119 if (!pIoc4) 6120 return; 6121 ioc->alloc_total += iocpage4sz; 6122 } else { 6123 ioc4_dma = ioc->spi_data.IocPg4_dma; 6124 iocpage4sz = ioc->spi_data.IocPg4Sz; 6125 } 6126 6127 /* Read the Page into dma memory. 6128 */ 6129 cfg.physAddr = ioc4_dma; 6130 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6131 if (mpt_config(ioc, &cfg) == 0) { 6132 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; 6133 ioc->spi_data.IocPg4_dma = ioc4_dma; 6134 ioc->spi_data.IocPg4Sz = iocpage4sz; 6135 } else { 6136 dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4, 6137 ioc4_dma); 6138 ioc->spi_data.pIocPg4 = NULL; 6139 ioc->alloc_total -= iocpage4sz; 6140 } 6141 } 6142 6143 static void 6144 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) 6145 { 6146 IOCPage1_t *pIoc1; 6147 CONFIGPARMS cfg; 6148 ConfigPageHeader_t header; 6149 dma_addr_t ioc1_dma; 6150 int iocpage1sz = 0; 6151 u32 tmp; 6152 6153 /* Check the Coalescing Timeout in IOC Page 1 6154 */ 6155 header.PageVersion = 0; 6156 header.PageLength = 0; 6157 header.PageNumber = 1; 6158 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6159 cfg.cfghdr.hdr = &header; 6160 cfg.physAddr = -1; 6161 cfg.pageAddr = 0; 6162 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6163 cfg.dir = 0; 6164 cfg.timeout = 0; 6165 if (mpt_config(ioc, &cfg) != 0) 6166 return; 6167 6168 if (header.PageLength == 0) 6169 return; 6170 6171 /* Read Header good, alloc memory 6172 */ 6173 iocpage1sz = header.PageLength * 4; 6174 pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma, 6175 GFP_KERNEL); 6176 if (!pIoc1) 6177 return; 6178 6179 /* Read the Page and check coalescing timeout 6180 */ 6181 cfg.physAddr = ioc1_dma; 6182 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6183 if (mpt_config(ioc, &cfg) == 0) { 6184 6185 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; 6186 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { 6187 tmp = le32_to_cpu(pIoc1->CoalescingTimeout); 6188 6189 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", 6190 ioc->name, tmp)); 6191 6192 if (tmp > MPT_COALESCING_TIMEOUT) { 6193 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); 6194 6195 /* Write NVRAM and current 6196 */ 6197 cfg.dir = 1; 6198 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 6199 if (mpt_config(ioc, &cfg) == 0) { 6200 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", 6201 ioc->name, MPT_COALESCING_TIMEOUT)); 6202 6203 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; 6204 if (mpt_config(ioc, &cfg) == 0) { 6205 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6206 "Reset NVRAM Coalescing Timeout to = %d\n", 6207 ioc->name, MPT_COALESCING_TIMEOUT)); 6208 } else { 6209 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6210 "Reset NVRAM Coalescing Timeout Failed\n", 6211 ioc->name)); 6212 } 6213 6214 } else { 6215 dprintk(ioc, printk(MYIOC_s_WARN_FMT 6216 "Reset of Current Coalescing Timeout Failed!\n", 6217 ioc->name)); 6218 } 6219 } 6220 6221 } else { 6222 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); 6223 } 6224 } 6225 6226 dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma); 6227 6228 return; 6229 } 6230 6231 static void 6232 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) 6233 { 6234 CONFIGPARMS cfg; 6235 ConfigPageHeader_t hdr; 6236 dma_addr_t buf_dma; 6237 ManufacturingPage0_t *pbuf = NULL; 6238 6239 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 6240 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 6241 6242 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 6243 cfg.cfghdr.hdr = &hdr; 6244 cfg.physAddr = -1; 6245 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6246 cfg.timeout = 10; 6247 6248 if (mpt_config(ioc, &cfg) != 0) 6249 goto out; 6250 6251 if (!cfg.cfghdr.hdr->PageLength) 6252 goto out; 6253 6254 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6255 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 6256 &buf_dma, GFP_KERNEL); 6257 if (!pbuf) 6258 goto out; 6259 6260 cfg.physAddr = buf_dma; 6261 6262 if (mpt_config(ioc, &cfg) != 0) 6263 goto out; 6264 6265 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); 6266 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); 6267 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); 6268 6269 out: 6270 6271 if (pbuf) 6272 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf, 6273 buf_dma); 6274 } 6275 6276 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6277 /** 6278 * SendEventNotification - Send EventNotification (on or off) request to adapter 6279 * @ioc: Pointer to MPT_ADAPTER structure 6280 * @EvSwitch: Event switch flags 6281 * @sleepFlag: Specifies whether the process can sleep 6282 */ 6283 static int 6284 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) 6285 { 6286 EventNotification_t evn; 6287 MPIDefaultReply_t reply_buf; 6288 6289 memset(&evn, 0, sizeof(EventNotification_t)); 6290 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); 6291 6292 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; 6293 evn.Switch = EvSwitch; 6294 evn.MsgContext = cpu_to_le32(mpt_base_index << 16); 6295 6296 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6297 "Sending EventNotification (%d) request %p\n", 6298 ioc->name, EvSwitch, &evn)); 6299 6300 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), 6301 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, 6302 sleepFlag); 6303 } 6304 6305 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6306 /** 6307 * SendEventAck - Send EventAck request to MPT adapter. 6308 * @ioc: Pointer to MPT_ADAPTER structure 6309 * @evnp: Pointer to original EventNotification request 6310 */ 6311 static int 6312 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) 6313 { 6314 EventAck_t *pAck; 6315 6316 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6317 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", 6318 ioc->name, __func__)); 6319 return -1; 6320 } 6321 6322 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); 6323 6324 pAck->Function = MPI_FUNCTION_EVENT_ACK; 6325 pAck->ChainOffset = 0; 6326 pAck->Reserved[0] = pAck->Reserved[1] = 0; 6327 pAck->MsgFlags = 0; 6328 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; 6329 pAck->Event = evnp->Event; 6330 pAck->EventContext = evnp->EventContext; 6331 6332 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); 6333 6334 return 0; 6335 } 6336 6337 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6338 /** 6339 * mpt_config - Generic function to issue config message 6340 * @ioc: Pointer to an adapter structure 6341 * @pCfg: Pointer to a configuration structure. Struct contains 6342 * action, page address, direction, physical address 6343 * and pointer to a configuration page header 6344 * Page header is updated. 6345 * 6346 * Returns 0 for success 6347 * -EAGAIN if no msg frames currently available 6348 * -EFAULT for non-successful reply or no reply (timeout) 6349 */ 6350 int 6351 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) 6352 { 6353 Config_t *pReq; 6354 ConfigReply_t *pReply; 6355 ConfigExtendedPageHeader_t *pExtHdr = NULL; 6356 MPT_FRAME_HDR *mf; 6357 int ii; 6358 int flagsLength; 6359 long timeout; 6360 int ret; 6361 u8 page_type = 0, extend_page; 6362 unsigned long timeleft; 6363 unsigned long flags; 6364 u8 issue_hard_reset = 0; 6365 u8 retry_count = 0; 6366 6367 might_sleep(); 6368 6369 /* don't send a config page during diag reset */ 6370 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6371 if (ioc->ioc_reset_in_progress) { 6372 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6373 "%s: busy with host reset\n", ioc->name, __func__)); 6374 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6375 return -EBUSY; 6376 } 6377 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6378 6379 /* don't send if no chance of success */ 6380 if (!ioc->active || 6381 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { 6382 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6383 "%s: ioc not operational, %d, %xh\n", 6384 ioc->name, __func__, ioc->active, 6385 mpt_GetIocState(ioc, 0))); 6386 return -EFAULT; 6387 } 6388 6389 retry_config: 6390 mutex_lock(&ioc->mptbase_cmds.mutex); 6391 /* init the internal cmd struct */ 6392 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 6393 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 6394 6395 /* Get and Populate a free Frame 6396 */ 6397 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6398 dcprintk(ioc, printk(MYIOC_s_WARN_FMT 6399 "mpt_config: no msg frames!\n", ioc->name)); 6400 ret = -EAGAIN; 6401 goto out; 6402 } 6403 6404 pReq = (Config_t *)mf; 6405 pReq->Action = pCfg->action; 6406 pReq->Reserved = 0; 6407 pReq->ChainOffset = 0; 6408 pReq->Function = MPI_FUNCTION_CONFIG; 6409 6410 /* Assume page type is not extended and clear "reserved" fields. */ 6411 pReq->ExtPageLength = 0; 6412 pReq->ExtPageType = 0; 6413 pReq->MsgFlags = 0; 6414 6415 for (ii=0; ii < 8; ii++) 6416 pReq->Reserved2[ii] = 0; 6417 6418 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; 6419 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; 6420 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; 6421 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); 6422 6423 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { 6424 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; 6425 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); 6426 pReq->ExtPageType = pExtHdr->ExtPageType; 6427 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 6428 6429 /* Page Length must be treated as a reserved field for the 6430 * extended header. 6431 */ 6432 pReq->Header.PageLength = 0; 6433 } 6434 6435 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); 6436 6437 /* Add a SGE to the config request. 6438 */ 6439 if (pCfg->dir) 6440 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 6441 else 6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 6443 6444 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == 6445 MPI_CONFIG_PAGETYPE_EXTENDED) { 6446 flagsLength |= pExtHdr->ExtPageLength * 4; 6447 page_type = pReq->ExtPageType; 6448 extend_page = 1; 6449 } else { 6450 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; 6451 page_type = pReq->Header.PageType; 6452 extend_page = 0; 6453 } 6454 6455 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6456 "Sending Config request type 0x%x, page 0x%x and action %d\n", 6457 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); 6458 6459 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); 6460 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; 6461 mpt_put_msg_frame(mpt_base_index, ioc, mf); 6462 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 6463 timeout); 6464 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 6465 ret = -ETIME; 6466 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6467 "Failed Sending Config request type 0x%x, page 0x%x," 6468 " action %d, status %xh, time left %ld\n\n", 6469 ioc->name, page_type, pReq->Header.PageNumber, 6470 pReq->Action, ioc->mptbase_cmds.status, timeleft)); 6471 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 6472 goto out; 6473 if (!timeleft) { 6474 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6475 if (ioc->ioc_reset_in_progress) { 6476 spin_unlock_irqrestore(&ioc->taskmgmt_lock, 6477 flags); 6478 printk(MYIOC_s_INFO_FMT "%s: host reset in" 6479 " progress mpt_config timed out.!!\n", 6480 __func__, ioc->name); 6481 mutex_unlock(&ioc->mptbase_cmds.mutex); 6482 return -EFAULT; 6483 } 6484 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6485 issue_hard_reset = 1; 6486 } 6487 goto out; 6488 } 6489 6490 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 6491 ret = -1; 6492 goto out; 6493 } 6494 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; 6495 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 6496 if (ret == MPI_IOCSTATUS_SUCCESS) { 6497 if (extend_page) { 6498 pCfg->cfghdr.ehdr->ExtPageLength = 6499 le16_to_cpu(pReply->ExtPageLength); 6500 pCfg->cfghdr.ehdr->ExtPageType = 6501 pReply->ExtPageType; 6502 } 6503 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; 6504 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; 6505 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; 6506 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; 6507 6508 } 6509 6510 if (retry_count) 6511 printk(MYIOC_s_INFO_FMT "Retry completed " 6512 "ret=0x%x timeleft=%ld\n", 6513 ioc->name, ret, timeleft); 6514 6515 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", 6516 ret, le32_to_cpu(pReply->IOCLogInfo))); 6517 6518 out: 6519 6520 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 6521 mutex_unlock(&ioc->mptbase_cmds.mutex); 6522 if (issue_hard_reset) { 6523 issue_hard_reset = 0; 6524 printk(MYIOC_s_WARN_FMT 6525 "Issuing Reset from %s!!, doorbell=0x%08x\n", 6526 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 6527 if (retry_count == 0) { 6528 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) 6529 retry_count++; 6530 } else 6531 mpt_HardResetHandler(ioc, CAN_SLEEP); 6532 6533 mpt_free_msg_frame(ioc, mf); 6534 /* attempt one retry for a timed out command */ 6535 if (retry_count < 2) { 6536 printk(MYIOC_s_INFO_FMT 6537 "Attempting Retry Config request" 6538 " type 0x%x, page 0x%x," 6539 " action %d\n", ioc->name, page_type, 6540 pCfg->cfghdr.hdr->PageNumber, pCfg->action); 6541 retry_count++; 6542 goto retry_config; 6543 } 6544 } 6545 return ret; 6546 6547 } 6548 6549 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6550 /** 6551 * mpt_ioc_reset - Base cleanup for hard reset 6552 * @ioc: Pointer to the adapter structure 6553 * @reset_phase: Indicates pre- or post-reset functionality 6554 * 6555 * Remark: Frees resources with internally generated commands. 6556 */ 6557 static int 6558 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 6559 { 6560 switch (reset_phase) { 6561 case MPT_IOC_SETUP_RESET: 6562 ioc->taskmgmt_quiesce_io = 1; 6563 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6564 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 6565 break; 6566 case MPT_IOC_PRE_RESET: 6567 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6568 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 6569 break; 6570 case MPT_IOC_POST_RESET: 6571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6572 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 6573 /* wake up mptbase_cmds */ 6574 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 6575 ioc->mptbase_cmds.status |= 6576 MPT_MGMT_STATUS_DID_IOCRESET; 6577 complete(&ioc->mptbase_cmds.done); 6578 } 6579 /* wake up taskmgmt_cmds */ 6580 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 6581 ioc->taskmgmt_cmds.status |= 6582 MPT_MGMT_STATUS_DID_IOCRESET; 6583 complete(&ioc->taskmgmt_cmds.done); 6584 } 6585 break; 6586 default: 6587 break; 6588 } 6589 6590 return 1; /* currently means nothing really */ 6591 } 6592 6593 6594 #ifdef CONFIG_PROC_FS /* { */ 6595 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6596 /* 6597 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... 6598 */ 6599 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6600 /** 6601 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. 6602 * 6603 * Returns 0 for success, non-zero for failure. 6604 */ 6605 static int 6606 procmpt_create(void) 6607 { 6608 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); 6609 if (mpt_proc_root_dir == NULL) 6610 return -ENOTDIR; 6611 6612 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir, 6613 mpt_summary_proc_show); 6614 proc_create_single("version", S_IRUGO, mpt_proc_root_dir, 6615 mpt_version_proc_show); 6616 return 0; 6617 } 6618 6619 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6620 /** 6621 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. 6622 * 6623 * Returns 0 for success, non-zero for failure. 6624 */ 6625 static void 6626 procmpt_destroy(void) 6627 { 6628 remove_proc_entry("version", mpt_proc_root_dir); 6629 remove_proc_entry("summary", mpt_proc_root_dir); 6630 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); 6631 } 6632 6633 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6634 /* 6635 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. 6636 */ 6637 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); 6638 6639 static int mpt_summary_proc_show(struct seq_file *m, void *v) 6640 { 6641 MPT_ADAPTER *ioc = m->private; 6642 6643 if (ioc) { 6644 seq_mpt_print_ioc_summary(ioc, m, 1); 6645 } else { 6646 list_for_each_entry(ioc, &ioc_list, list) { 6647 seq_mpt_print_ioc_summary(ioc, m, 1); 6648 } 6649 } 6650 6651 return 0; 6652 } 6653 6654 static int mpt_version_proc_show(struct seq_file *m, void *v) 6655 { 6656 u8 cb_idx; 6657 int scsi, fc, sas, lan, ctl, targ; 6658 char *drvname; 6659 6660 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); 6661 seq_printf(m, " Fusion MPT base driver\n"); 6662 6663 scsi = fc = sas = lan = ctl = targ = 0; 6664 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 6665 drvname = NULL; 6666 if (MptCallbacks[cb_idx]) { 6667 switch (MptDriverClass[cb_idx]) { 6668 case MPTSPI_DRIVER: 6669 if (!scsi++) drvname = "SPI host"; 6670 break; 6671 case MPTFC_DRIVER: 6672 if (!fc++) drvname = "FC host"; 6673 break; 6674 case MPTSAS_DRIVER: 6675 if (!sas++) drvname = "SAS host"; 6676 break; 6677 case MPTLAN_DRIVER: 6678 if (!lan++) drvname = "LAN"; 6679 break; 6680 case MPTSTM_DRIVER: 6681 if (!targ++) drvname = "SCSI target"; 6682 break; 6683 case MPTCTL_DRIVER: 6684 if (!ctl++) drvname = "ioctl"; 6685 break; 6686 } 6687 6688 if (drvname) 6689 seq_printf(m, " Fusion MPT %s driver\n", drvname); 6690 } 6691 } 6692 6693 return 0; 6694 } 6695 6696 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) 6697 { 6698 MPT_ADAPTER *ioc = m->private; 6699 char expVer[32]; 6700 int sz; 6701 int p; 6702 6703 mpt_get_fw_exp_ver(expVer, ioc); 6704 6705 seq_printf(m, "%s:", ioc->name); 6706 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 6707 seq_printf(m, " (f/w download boot flag set)"); 6708 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) 6709 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); 6710 6711 seq_printf(m, "\n ProductID = 0x%04x (%s)\n", 6712 ioc->facts.ProductID, 6713 ioc->prod_name); 6714 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); 6715 if (ioc->facts.FWImageSize) 6716 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); 6717 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); 6718 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); 6719 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); 6720 6721 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", 6722 ioc->facts.CurrentHostMfaHighAddr); 6723 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", 6724 ioc->facts.CurrentSenseBufferHighAddr); 6725 6726 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); 6727 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); 6728 6729 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", 6730 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); 6731 /* 6732 * Rounding UP to nearest 4-kB boundary here... 6733 */ 6734 sz = (ioc->req_sz * ioc->req_depth) + 128; 6735 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; 6736 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", 6737 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); 6738 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", 6739 4*ioc->facts.RequestFrameSize, 6740 ioc->facts.GlobalCredits); 6741 6742 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", 6743 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); 6744 sz = (ioc->reply_sz * ioc->reply_depth) + 128; 6745 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", 6746 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); 6747 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", 6748 ioc->facts.CurReplyFrameSize, 6749 ioc->facts.ReplyQueueDepth); 6750 6751 seq_printf(m, " MaxDevices = %d\n", 6752 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); 6753 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); 6754 6755 /* per-port info */ 6756 for (p=0; p < ioc->facts.NumberOfPorts; p++) { 6757 seq_printf(m, " PortNumber = %d (of %d)\n", 6758 p+1, 6759 ioc->facts.NumberOfPorts); 6760 if (ioc->bus_type == FC) { 6761 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 6762 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6763 seq_printf(m, " LanAddr = %pMR\n", a); 6764 } 6765 seq_printf(m, " WWN = %08X%08X:%08X%08X\n", 6766 ioc->fc_port_page0[p].WWNN.High, 6767 ioc->fc_port_page0[p].WWNN.Low, 6768 ioc->fc_port_page0[p].WWPN.High, 6769 ioc->fc_port_page0[p].WWPN.Low); 6770 } 6771 } 6772 6773 return 0; 6774 } 6775 #endif /* CONFIG_PROC_FS } */ 6776 6777 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6778 static void 6779 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) 6780 { 6781 buf[0] ='\0'; 6782 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { 6783 sprintf(buf, " (Exp %02d%02d)", 6784 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ 6785 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ 6786 6787 /* insider hack! */ 6788 if ((ioc->facts.FWVersion.Word >> 8) & 0x80) 6789 strcat(buf, " [MDBG]"); 6790 } 6791 } 6792 6793 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6794 /** 6795 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. 6796 * @ioc: Pointer to MPT_ADAPTER structure 6797 * @buffer: Pointer to buffer where IOC summary info should be written 6798 * @size: Pointer to number of bytes we wrote (set by this routine) 6799 * @len: Offset at which to start writing in buffer 6800 * @showlan: Display LAN stuff? 6801 * 6802 * This routine writes (english readable) ASCII text, which represents 6803 * a summary of IOC information, to a buffer. 6804 */ 6805 void 6806 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) 6807 { 6808 char expVer[32]; 6809 int y; 6810 6811 mpt_get_fw_exp_ver(expVer, ioc); 6812 6813 /* 6814 * Shorter summary of attached ioc's... 6815 */ 6816 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6817 ioc->name, 6818 ioc->prod_name, 6819 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6820 ioc->facts.FWVersion.Word, 6821 expVer, 6822 ioc->facts.NumberOfPorts, 6823 ioc->req_depth); 6824 6825 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6826 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6827 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a); 6828 } 6829 6830 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); 6831 6832 if (!ioc->active) 6833 y += sprintf(buffer+len+y, " (disabled)"); 6834 6835 y += sprintf(buffer+len+y, "\n"); 6836 6837 *size = y; 6838 } 6839 6840 #ifdef CONFIG_PROC_FS 6841 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) 6842 { 6843 char expVer[32]; 6844 6845 mpt_get_fw_exp_ver(expVer, ioc); 6846 6847 /* 6848 * Shorter summary of attached ioc's... 6849 */ 6850 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6851 ioc->name, 6852 ioc->prod_name, 6853 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6854 ioc->facts.FWVersion.Word, 6855 expVer, 6856 ioc->facts.NumberOfPorts, 6857 ioc->req_depth); 6858 6859 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6860 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6861 seq_printf(m, ", LanAddr=%pMR", a); 6862 } 6863 6864 seq_printf(m, ", IRQ=%d", ioc->pci_irq); 6865 6866 if (!ioc->active) 6867 seq_printf(m, " (disabled)"); 6868 6869 seq_putc(m, '\n'); 6870 } 6871 #endif 6872 6873 /** 6874 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management 6875 * @ioc: Pointer to MPT_ADAPTER structure 6876 * 6877 * Returns 0 for SUCCESS or -1 if FAILED. 6878 * 6879 * If -1 is return, then it was not possible to set the flags 6880 **/ 6881 int 6882 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6883 { 6884 unsigned long flags; 6885 int retval; 6886 6887 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6888 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || 6889 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { 6890 retval = -1; 6891 goto out; 6892 } 6893 retval = 0; 6894 ioc->taskmgmt_in_progress = 1; 6895 ioc->taskmgmt_quiesce_io = 1; 6896 if (ioc->alt_ioc) { 6897 ioc->alt_ioc->taskmgmt_in_progress = 1; 6898 ioc->alt_ioc->taskmgmt_quiesce_io = 1; 6899 } 6900 out: 6901 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6902 return retval; 6903 } 6904 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); 6905 6906 /** 6907 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management 6908 * @ioc: Pointer to MPT_ADAPTER structure 6909 * 6910 **/ 6911 void 6912 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6913 { 6914 unsigned long flags; 6915 6916 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6917 ioc->taskmgmt_in_progress = 0; 6918 ioc->taskmgmt_quiesce_io = 0; 6919 if (ioc->alt_ioc) { 6920 ioc->alt_ioc->taskmgmt_in_progress = 0; 6921 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 6922 } 6923 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6924 } 6925 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); 6926 6927 6928 /** 6929 * mpt_halt_firmware - Halts the firmware if it is operational and panic 6930 * the kernel 6931 * @ioc: Pointer to MPT_ADAPTER structure 6932 * 6933 **/ 6934 void __noreturn 6935 mpt_halt_firmware(MPT_ADAPTER *ioc) 6936 { 6937 u32 ioc_raw_state; 6938 6939 ioc_raw_state = mpt_GetIocState(ioc, 0); 6940 6941 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 6942 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", 6943 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6944 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, 6945 ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6946 } else { 6947 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); 6948 panic("%s: Firmware is halted due to command timeout\n", 6949 ioc->name); 6950 } 6951 } 6952 EXPORT_SYMBOL(mpt_halt_firmware); 6953 6954 /** 6955 * mpt_SoftResetHandler - Issues a less expensive reset 6956 * @ioc: Pointer to MPT_ADAPTER structure 6957 * @sleepFlag: Indicates if sleep or schedule must be called. 6958 * 6959 * Returns 0 for SUCCESS or -1 if FAILED. 6960 * 6961 * Message Unit Reset - instructs the IOC to reset the Reply Post and 6962 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. 6963 * All posted buffers are freed, and event notification is turned off. 6964 * IOC doesn't reply to any outstanding request. This will transfer IOC 6965 * to READY state. 6966 **/ 6967 static int 6968 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 6969 { 6970 int rc; 6971 int ii; 6972 u8 cb_idx; 6973 unsigned long flags; 6974 u32 ioc_state; 6975 unsigned long time_count; 6976 6977 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", 6978 ioc->name)); 6979 6980 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 6981 6982 if (mpt_fwfault_debug) 6983 mpt_halt_firmware(ioc); 6984 6985 if (ioc_state == MPI_IOC_STATE_FAULT || 6986 ioc_state == MPI_IOC_STATE_RESET) { 6987 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6988 "skipping, either in FAULT or RESET state!\n", ioc->name)); 6989 return -1; 6990 } 6991 6992 if (ioc->bus_type == FC) { 6993 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6994 "skipping, because the bus type is FC!\n", ioc->name)); 6995 return -1; 6996 } 6997 6998 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6999 if (ioc->ioc_reset_in_progress) { 7000 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7001 return -1; 7002 } 7003 ioc->ioc_reset_in_progress = 1; 7004 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7005 7006 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7007 if (MptResetHandlers[cb_idx]) 7008 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7009 } 7010 7011 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7012 if (ioc->taskmgmt_in_progress) { 7013 ioc->ioc_reset_in_progress = 0; 7014 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7015 return -1; 7016 } 7017 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7018 /* Disable reply interrupts (also blocks FreeQ) */ 7019 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 7020 ioc->active = 0; 7021 time_count = jiffies; 7022 7023 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 7024 7025 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7026 if (MptResetHandlers[cb_idx]) 7027 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); 7028 } 7029 7030 if (rc) 7031 goto out; 7032 7033 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7034 if (ioc_state != MPI_IOC_STATE_READY) 7035 goto out; 7036 7037 for (ii = 0; ii < 5; ii++) { 7038 /* Get IOC facts! Allow 5 retries */ 7039 rc = GetIocFacts(ioc, sleepFlag, 7040 MPT_HOSTEVENT_IOC_RECOVER); 7041 if (rc == 0) 7042 break; 7043 if (sleepFlag == CAN_SLEEP) 7044 msleep(100); 7045 else 7046 mdelay(100); 7047 } 7048 if (ii == 5) 7049 goto out; 7050 7051 rc = PrimeIocFifos(ioc); 7052 if (rc != 0) 7053 goto out; 7054 7055 rc = SendIocInit(ioc, sleepFlag); 7056 if (rc != 0) 7057 goto out; 7058 7059 rc = SendEventNotification(ioc, 1, sleepFlag); 7060 if (rc != 0) 7061 goto out; 7062 7063 if (ioc->hard_resets < -1) 7064 ioc->hard_resets++; 7065 7066 /* 7067 * At this point, we know soft reset succeeded. 7068 */ 7069 7070 ioc->active = 1; 7071 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 7072 7073 out: 7074 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7075 ioc->ioc_reset_in_progress = 0; 7076 ioc->taskmgmt_quiesce_io = 0; 7077 ioc->taskmgmt_in_progress = 0; 7078 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7079 7080 if (ioc->active) { /* otherwise, hard reset coming */ 7081 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7082 if (MptResetHandlers[cb_idx]) 7083 mpt_signal_reset(cb_idx, ioc, 7084 MPT_IOC_POST_RESET); 7085 } 7086 } 7087 7088 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7089 "SoftResetHandler: completed (%d seconds): %s\n", 7090 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, 7091 ((rc == 0) ? "SUCCESS" : "FAILED"))); 7092 7093 return rc; 7094 } 7095 7096 /** 7097 * mpt_Soft_Hard_ResetHandler - Try less expensive reset 7098 * @ioc: Pointer to MPT_ADAPTER structure 7099 * @sleepFlag: Indicates if sleep or schedule must be called. 7100 * 7101 * Returns 0 for SUCCESS or -1 if FAILED. 7102 * Try for softreset first, only if it fails go for expensive 7103 * HardReset. 7104 **/ 7105 int 7106 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { 7107 int ret = -1; 7108 7109 ret = mpt_SoftResetHandler(ioc, sleepFlag); 7110 if (ret == 0) 7111 return ret; 7112 ret = mpt_HardResetHandler(ioc, sleepFlag); 7113 return ret; 7114 } 7115 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); 7116 7117 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7118 /* 7119 * Reset Handling 7120 */ 7121 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7122 /** 7123 * mpt_HardResetHandler - Generic reset handler 7124 * @ioc: Pointer to MPT_ADAPTER structure 7125 * @sleepFlag: Indicates if sleep or schedule must be called. 7126 * 7127 * Issues SCSI Task Management call based on input arg values. 7128 * If TaskMgmt fails, returns associated SCSI request. 7129 * 7130 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 7131 * or a non-interrupt thread. In the former, must not call schedule(). 7132 * 7133 * Note: A return of -1 is a FATAL error case, as it means a 7134 * FW reload/initialization failed. 7135 * 7136 * Returns 0 for SUCCESS or -1 if FAILED. 7137 */ 7138 int 7139 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7140 { 7141 int rc; 7142 u8 cb_idx; 7143 unsigned long flags; 7144 unsigned long time_count; 7145 7146 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); 7147 #ifdef MFCNT 7148 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); 7149 printk("MF count 0x%x !\n", ioc->mfcnt); 7150 #endif 7151 if (mpt_fwfault_debug) 7152 mpt_halt_firmware(ioc); 7153 7154 /* Reset the adapter. Prevent more than 1 call to 7155 * mpt_do_ioc_recovery at any instant in time. 7156 */ 7157 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7158 if (ioc->ioc_reset_in_progress) { 7159 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7160 ioc->wait_on_reset_completion = 1; 7161 do { 7162 ssleep(1); 7163 } while (ioc->ioc_reset_in_progress == 1); 7164 ioc->wait_on_reset_completion = 0; 7165 return ioc->reset_status; 7166 } 7167 if (ioc->wait_on_reset_completion) { 7168 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7169 rc = 0; 7170 time_count = jiffies; 7171 goto exit; 7172 } 7173 ioc->ioc_reset_in_progress = 1; 7174 if (ioc->alt_ioc) 7175 ioc->alt_ioc->ioc_reset_in_progress = 1; 7176 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7177 7178 7179 /* The SCSI driver needs to adjust timeouts on all current 7180 * commands prior to the diagnostic reset being issued. 7181 * Prevents timeouts occurring during a diagnostic reset...very bad. 7182 * For all other protocol drivers, this is a no-op. 7183 */ 7184 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7185 if (MptResetHandlers[cb_idx]) { 7186 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7187 if (ioc->alt_ioc) 7188 mpt_signal_reset(cb_idx, ioc->alt_ioc, 7189 MPT_IOC_SETUP_RESET); 7190 } 7191 } 7192 7193 time_count = jiffies; 7194 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); 7195 if (rc != 0) { 7196 printk(KERN_WARNING MYNAM 7197 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", 7198 rc, ioc->name, mpt_GetIocState(ioc, 0)); 7199 } else { 7200 if (ioc->hard_resets < -1) 7201 ioc->hard_resets++; 7202 } 7203 7204 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7205 ioc->ioc_reset_in_progress = 0; 7206 ioc->taskmgmt_quiesce_io = 0; 7207 ioc->taskmgmt_in_progress = 0; 7208 ioc->reset_status = rc; 7209 if (ioc->alt_ioc) { 7210 ioc->alt_ioc->ioc_reset_in_progress = 0; 7211 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 7212 ioc->alt_ioc->taskmgmt_in_progress = 0; 7213 } 7214 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7215 7216 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7217 if (MptResetHandlers[cb_idx]) { 7218 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); 7219 if (ioc->alt_ioc) 7220 mpt_signal_reset(cb_idx, 7221 ioc->alt_ioc, MPT_IOC_POST_RESET); 7222 } 7223 } 7224 exit: 7225 dtmprintk(ioc, 7226 printk(MYIOC_s_DEBUG_FMT 7227 "HardResetHandler: completed (%d seconds): %s\n", ioc->name, 7228 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? 7229 "SUCCESS" : "FAILED"))); 7230 7231 return rc; 7232 } 7233 7234 #ifdef CONFIG_FUSION_LOGGING 7235 static void 7236 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) 7237 { 7238 char *ds = NULL; 7239 u32 evData0; 7240 int ii; 7241 u8 event; 7242 char *evStr = ioc->evStr; 7243 7244 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7245 evData0 = le32_to_cpu(pEventReply->Data[0]); 7246 7247 switch(event) { 7248 case MPI_EVENT_NONE: 7249 ds = "None"; 7250 break; 7251 case MPI_EVENT_LOG_DATA: 7252 ds = "Log Data"; 7253 break; 7254 case MPI_EVENT_STATE_CHANGE: 7255 ds = "State Change"; 7256 break; 7257 case MPI_EVENT_UNIT_ATTENTION: 7258 ds = "Unit Attention"; 7259 break; 7260 case MPI_EVENT_IOC_BUS_RESET: 7261 ds = "IOC Bus Reset"; 7262 break; 7263 case MPI_EVENT_EXT_BUS_RESET: 7264 ds = "External Bus Reset"; 7265 break; 7266 case MPI_EVENT_RESCAN: 7267 ds = "Bus Rescan Event"; 7268 break; 7269 case MPI_EVENT_LINK_STATUS_CHANGE: 7270 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) 7271 ds = "Link Status(FAILURE) Change"; 7272 else 7273 ds = "Link Status(ACTIVE) Change"; 7274 break; 7275 case MPI_EVENT_LOOP_STATE_CHANGE: 7276 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) 7277 ds = "Loop State(LIP) Change"; 7278 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) 7279 ds = "Loop State(LPE) Change"; 7280 else 7281 ds = "Loop State(LPB) Change"; 7282 break; 7283 case MPI_EVENT_LOGOUT: 7284 ds = "Logout"; 7285 break; 7286 case MPI_EVENT_EVENT_CHANGE: 7287 if (evData0) 7288 ds = "Events ON"; 7289 else 7290 ds = "Events OFF"; 7291 break; 7292 case MPI_EVENT_INTEGRATED_RAID: 7293 { 7294 u8 ReasonCode = (u8)(evData0 >> 16); 7295 switch (ReasonCode) { 7296 case MPI_EVENT_RAID_RC_VOLUME_CREATED : 7297 ds = "Integrated Raid: Volume Created"; 7298 break; 7299 case MPI_EVENT_RAID_RC_VOLUME_DELETED : 7300 ds = "Integrated Raid: Volume Deleted"; 7301 break; 7302 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : 7303 ds = "Integrated Raid: Volume Settings Changed"; 7304 break; 7305 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : 7306 ds = "Integrated Raid: Volume Status Changed"; 7307 break; 7308 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : 7309 ds = "Integrated Raid: Volume Physdisk Changed"; 7310 break; 7311 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : 7312 ds = "Integrated Raid: Physdisk Created"; 7313 break; 7314 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : 7315 ds = "Integrated Raid: Physdisk Deleted"; 7316 break; 7317 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : 7318 ds = "Integrated Raid: Physdisk Settings Changed"; 7319 break; 7320 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : 7321 ds = "Integrated Raid: Physdisk Status Changed"; 7322 break; 7323 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : 7324 ds = "Integrated Raid: Domain Validation Needed"; 7325 break; 7326 case MPI_EVENT_RAID_RC_SMART_DATA : 7327 ds = "Integrated Raid; Smart Data"; 7328 break; 7329 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : 7330 ds = "Integrated Raid: Replace Action Started"; 7331 break; 7332 default: 7333 ds = "Integrated Raid"; 7334 break; 7335 } 7336 break; 7337 } 7338 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: 7339 ds = "SCSI Device Status Change"; 7340 break; 7341 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 7342 { 7343 u8 id = (u8)(evData0); 7344 u8 channel = (u8)(evData0 >> 8); 7345 u8 ReasonCode = (u8)(evData0 >> 16); 7346 switch (ReasonCode) { 7347 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 7348 snprintf(evStr, EVENT_DESCR_STR_SZ, 7349 "SAS Device Status Change: Added: " 7350 "id=%d channel=%d", id, channel); 7351 break; 7352 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 7353 snprintf(evStr, EVENT_DESCR_STR_SZ, 7354 "SAS Device Status Change: Deleted: " 7355 "id=%d channel=%d", id, channel); 7356 break; 7357 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: 7358 snprintf(evStr, EVENT_DESCR_STR_SZ, 7359 "SAS Device Status Change: SMART Data: " 7360 "id=%d channel=%d", id, channel); 7361 break; 7362 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: 7363 snprintf(evStr, EVENT_DESCR_STR_SZ, 7364 "SAS Device Status Change: No Persistency: " 7365 "id=%d channel=%d", id, channel); 7366 break; 7367 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: 7368 snprintf(evStr, EVENT_DESCR_STR_SZ, 7369 "SAS Device Status Change: Unsupported Device " 7370 "Discovered : id=%d channel=%d", id, channel); 7371 break; 7372 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 7373 snprintf(evStr, EVENT_DESCR_STR_SZ, 7374 "SAS Device Status Change: Internal Device " 7375 "Reset : id=%d channel=%d", id, channel); 7376 break; 7377 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: 7378 snprintf(evStr, EVENT_DESCR_STR_SZ, 7379 "SAS Device Status Change: Internal Task " 7380 "Abort : id=%d channel=%d", id, channel); 7381 break; 7382 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: 7383 snprintf(evStr, EVENT_DESCR_STR_SZ, 7384 "SAS Device Status Change: Internal Abort " 7385 "Task Set : id=%d channel=%d", id, channel); 7386 break; 7387 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: 7388 snprintf(evStr, EVENT_DESCR_STR_SZ, 7389 "SAS Device Status Change: Internal Clear " 7390 "Task Set : id=%d channel=%d", id, channel); 7391 break; 7392 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: 7393 snprintf(evStr, EVENT_DESCR_STR_SZ, 7394 "SAS Device Status Change: Internal Query " 7395 "Task : id=%d channel=%d", id, channel); 7396 break; 7397 default: 7398 snprintf(evStr, EVENT_DESCR_STR_SZ, 7399 "SAS Device Status Change: Unknown: " 7400 "id=%d channel=%d", id, channel); 7401 break; 7402 } 7403 break; 7404 } 7405 case MPI_EVENT_ON_BUS_TIMER_EXPIRED: 7406 ds = "Bus Timer Expired"; 7407 break; 7408 case MPI_EVENT_QUEUE_FULL: 7409 { 7410 u16 curr_depth = (u16)(evData0 >> 16); 7411 u8 channel = (u8)(evData0 >> 8); 7412 u8 id = (u8)(evData0); 7413 7414 snprintf(evStr, EVENT_DESCR_STR_SZ, 7415 "Queue Full: channel=%d id=%d depth=%d", 7416 channel, id, curr_depth); 7417 break; 7418 } 7419 case MPI_EVENT_SAS_SES: 7420 ds = "SAS SES Event"; 7421 break; 7422 case MPI_EVENT_PERSISTENT_TABLE_FULL: 7423 ds = "Persistent Table Full"; 7424 break; 7425 case MPI_EVENT_SAS_PHY_LINK_STATUS: 7426 { 7427 u8 LinkRates = (u8)(evData0 >> 8); 7428 u8 PhyNumber = (u8)(evData0); 7429 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> 7430 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; 7431 switch (LinkRates) { 7432 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: 7433 snprintf(evStr, EVENT_DESCR_STR_SZ, 7434 "SAS PHY Link Status: Phy=%d:" 7435 " Rate Unknown",PhyNumber); 7436 break; 7437 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: 7438 snprintf(evStr, EVENT_DESCR_STR_SZ, 7439 "SAS PHY Link Status: Phy=%d:" 7440 " Phy Disabled",PhyNumber); 7441 break; 7442 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: 7443 snprintf(evStr, EVENT_DESCR_STR_SZ, 7444 "SAS PHY Link Status: Phy=%d:" 7445 " Failed Speed Nego",PhyNumber); 7446 break; 7447 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: 7448 snprintf(evStr, EVENT_DESCR_STR_SZ, 7449 "SAS PHY Link Status: Phy=%d:" 7450 " Sata OOB Completed",PhyNumber); 7451 break; 7452 case MPI_EVENT_SAS_PLS_LR_RATE_1_5: 7453 snprintf(evStr, EVENT_DESCR_STR_SZ, 7454 "SAS PHY Link Status: Phy=%d:" 7455 " Rate 1.5 Gbps",PhyNumber); 7456 break; 7457 case MPI_EVENT_SAS_PLS_LR_RATE_3_0: 7458 snprintf(evStr, EVENT_DESCR_STR_SZ, 7459 "SAS PHY Link Status: Phy=%d:" 7460 " Rate 3.0 Gbps", PhyNumber); 7461 break; 7462 case MPI_EVENT_SAS_PLS_LR_RATE_6_0: 7463 snprintf(evStr, EVENT_DESCR_STR_SZ, 7464 "SAS PHY Link Status: Phy=%d:" 7465 " Rate 6.0 Gbps", PhyNumber); 7466 break; 7467 default: 7468 snprintf(evStr, EVENT_DESCR_STR_SZ, 7469 "SAS PHY Link Status: Phy=%d", PhyNumber); 7470 break; 7471 } 7472 break; 7473 } 7474 case MPI_EVENT_SAS_DISCOVERY_ERROR: 7475 ds = "SAS Discovery Error"; 7476 break; 7477 case MPI_EVENT_IR_RESYNC_UPDATE: 7478 { 7479 u8 resync_complete = (u8)(evData0 >> 16); 7480 snprintf(evStr, EVENT_DESCR_STR_SZ, 7481 "IR Resync Update: Complete = %d:",resync_complete); 7482 break; 7483 } 7484 case MPI_EVENT_IR2: 7485 { 7486 u8 id = (u8)(evData0); 7487 u8 channel = (u8)(evData0 >> 8); 7488 u8 phys_num = (u8)(evData0 >> 24); 7489 u8 ReasonCode = (u8)(evData0 >> 16); 7490 7491 switch (ReasonCode) { 7492 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: 7493 snprintf(evStr, EVENT_DESCR_STR_SZ, 7494 "IR2: LD State Changed: " 7495 "id=%d channel=%d phys_num=%d", 7496 id, channel, phys_num); 7497 break; 7498 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: 7499 snprintf(evStr, EVENT_DESCR_STR_SZ, 7500 "IR2: PD State Changed " 7501 "id=%d channel=%d phys_num=%d", 7502 id, channel, phys_num); 7503 break; 7504 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: 7505 snprintf(evStr, EVENT_DESCR_STR_SZ, 7506 "IR2: Bad Block Table Full: " 7507 "id=%d channel=%d phys_num=%d", 7508 id, channel, phys_num); 7509 break; 7510 case MPI_EVENT_IR2_RC_PD_INSERTED: 7511 snprintf(evStr, EVENT_DESCR_STR_SZ, 7512 "IR2: PD Inserted: " 7513 "id=%d channel=%d phys_num=%d", 7514 id, channel, phys_num); 7515 break; 7516 case MPI_EVENT_IR2_RC_PD_REMOVED: 7517 snprintf(evStr, EVENT_DESCR_STR_SZ, 7518 "IR2: PD Removed: " 7519 "id=%d channel=%d phys_num=%d", 7520 id, channel, phys_num); 7521 break; 7522 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: 7523 snprintf(evStr, EVENT_DESCR_STR_SZ, 7524 "IR2: Foreign CFG Detected: " 7525 "id=%d channel=%d phys_num=%d", 7526 id, channel, phys_num); 7527 break; 7528 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: 7529 snprintf(evStr, EVENT_DESCR_STR_SZ, 7530 "IR2: Rebuild Medium Error: " 7531 "id=%d channel=%d phys_num=%d", 7532 id, channel, phys_num); 7533 break; 7534 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: 7535 snprintf(evStr, EVENT_DESCR_STR_SZ, 7536 "IR2: Dual Port Added: " 7537 "id=%d channel=%d phys_num=%d", 7538 id, channel, phys_num); 7539 break; 7540 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: 7541 snprintf(evStr, EVENT_DESCR_STR_SZ, 7542 "IR2: Dual Port Removed: " 7543 "id=%d channel=%d phys_num=%d", 7544 id, channel, phys_num); 7545 break; 7546 default: 7547 ds = "IR2"; 7548 break; 7549 } 7550 break; 7551 } 7552 case MPI_EVENT_SAS_DISCOVERY: 7553 { 7554 if (evData0) 7555 ds = "SAS Discovery: Start"; 7556 else 7557 ds = "SAS Discovery: Stop"; 7558 break; 7559 } 7560 case MPI_EVENT_LOG_ENTRY_ADDED: 7561 ds = "SAS Log Entry Added"; 7562 break; 7563 7564 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 7565 { 7566 u8 phy_num = (u8)(evData0); 7567 u8 port_num = (u8)(evData0 >> 8); 7568 u8 port_width = (u8)(evData0 >> 16); 7569 u8 primitive = (u8)(evData0 >> 24); 7570 snprintf(evStr, EVENT_DESCR_STR_SZ, 7571 "SAS Broadcast Primitive: phy=%d port=%d " 7572 "width=%d primitive=0x%02x", 7573 phy_num, port_num, port_width, primitive); 7574 break; 7575 } 7576 7577 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: 7578 { 7579 u8 reason = (u8)(evData0); 7580 7581 switch (reason) { 7582 case MPI_EVENT_SAS_INIT_RC_ADDED: 7583 ds = "SAS Initiator Status Change: Added"; 7584 break; 7585 case MPI_EVENT_SAS_INIT_RC_REMOVED: 7586 ds = "SAS Initiator Status Change: Deleted"; 7587 break; 7588 default: 7589 ds = "SAS Initiator Status Change"; 7590 break; 7591 } 7592 break; 7593 } 7594 7595 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: 7596 { 7597 u8 max_init = (u8)(evData0); 7598 u8 current_init = (u8)(evData0 >> 8); 7599 7600 snprintf(evStr, EVENT_DESCR_STR_SZ, 7601 "SAS Initiator Device Table Overflow: max initiators=%02d " 7602 "current initiators=%02d", 7603 max_init, current_init); 7604 break; 7605 } 7606 case MPI_EVENT_SAS_SMP_ERROR: 7607 { 7608 u8 status = (u8)(evData0); 7609 u8 port_num = (u8)(evData0 >> 8); 7610 u8 result = (u8)(evData0 >> 16); 7611 7612 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) 7613 snprintf(evStr, EVENT_DESCR_STR_SZ, 7614 "SAS SMP Error: port=%d result=0x%02x", 7615 port_num, result); 7616 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) 7617 snprintf(evStr, EVENT_DESCR_STR_SZ, 7618 "SAS SMP Error: port=%d : CRC Error", 7619 port_num); 7620 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) 7621 snprintf(evStr, EVENT_DESCR_STR_SZ, 7622 "SAS SMP Error: port=%d : Timeout", 7623 port_num); 7624 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) 7625 snprintf(evStr, EVENT_DESCR_STR_SZ, 7626 "SAS SMP Error: port=%d : No Destination", 7627 port_num); 7628 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) 7629 snprintf(evStr, EVENT_DESCR_STR_SZ, 7630 "SAS SMP Error: port=%d : Bad Destination", 7631 port_num); 7632 else 7633 snprintf(evStr, EVENT_DESCR_STR_SZ, 7634 "SAS SMP Error: port=%d : status=0x%02x", 7635 port_num, status); 7636 break; 7637 } 7638 7639 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 7640 { 7641 u8 reason = (u8)(evData0); 7642 7643 switch (reason) { 7644 case MPI_EVENT_SAS_EXP_RC_ADDED: 7645 ds = "Expander Status Change: Added"; 7646 break; 7647 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: 7648 ds = "Expander Status Change: Deleted"; 7649 break; 7650 default: 7651 ds = "Expander Status Change"; 7652 break; 7653 } 7654 break; 7655 } 7656 7657 /* 7658 * MPT base "custom" events may be added here... 7659 */ 7660 default: 7661 ds = "Unknown"; 7662 break; 7663 } 7664 if (ds) 7665 strscpy(evStr, ds, EVENT_DESCR_STR_SZ); 7666 7667 7668 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7669 "MPT event:(%02Xh) : %s\n", 7670 ioc->name, event, evStr)); 7671 7672 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM 7673 ": Event data:\n")); 7674 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) 7675 devtverboseprintk(ioc, printk(" %08x", 7676 le32_to_cpu(pEventReply->Data[ii]))); 7677 devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); 7678 } 7679 #endif 7680 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7681 /** 7682 * ProcessEventNotification - Route EventNotificationReply to all event handlers 7683 * @ioc: Pointer to MPT_ADAPTER structure 7684 * @pEventReply: Pointer to EventNotification reply frame 7685 * @evHandlers: Pointer to integer, number of event handlers 7686 * 7687 * Routes a received EventNotificationReply to all currently registered 7688 * event handlers. 7689 * Returns sum of event handlers return values. 7690 */ 7691 static int 7692 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) 7693 { 7694 u16 evDataLen; 7695 u32 evData0 = 0; 7696 int ii; 7697 u8 cb_idx; 7698 int r = 0; 7699 int handlers = 0; 7700 u8 event; 7701 7702 /* 7703 * Do platform normalization of values 7704 */ 7705 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7706 evDataLen = le16_to_cpu(pEventReply->EventDataLength); 7707 if (evDataLen) { 7708 evData0 = le32_to_cpu(pEventReply->Data[0]); 7709 } 7710 7711 #ifdef CONFIG_FUSION_LOGGING 7712 if (evDataLen) 7713 mpt_display_event_info(ioc, pEventReply); 7714 #endif 7715 7716 /* 7717 * Do general / base driver event processing 7718 */ 7719 switch(event) { 7720 case MPI_EVENT_EVENT_CHANGE: /* 0A */ 7721 if (evDataLen) { 7722 u8 evState = evData0 & 0xFF; 7723 7724 /* CHECKME! What if evState unexpectedly says OFF (0)? */ 7725 7726 /* Update EventState field in cached IocFacts */ 7727 if (ioc->facts.Function) { 7728 ioc->facts.EventState = evState; 7729 } 7730 } 7731 break; 7732 case MPI_EVENT_INTEGRATED_RAID: 7733 mptbase_raid_process_event_data(ioc, 7734 (MpiEventDataRaid_t *)pEventReply->Data); 7735 break; 7736 default: 7737 break; 7738 } 7739 7740 /* 7741 * Should this event be logged? Events are written sequentially. 7742 * When buffer is full, start again at the top. 7743 */ 7744 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 7745 int idx; 7746 7747 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 7748 7749 ioc->events[idx].event = event; 7750 ioc->events[idx].eventContext = ioc->eventContext; 7751 7752 for (ii = 0; ii < 2; ii++) { 7753 if (ii < evDataLen) 7754 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); 7755 else 7756 ioc->events[idx].data[ii] = 0; 7757 } 7758 7759 ioc->eventContext++; 7760 } 7761 7762 7763 /* 7764 * Call each currently registered protocol event handler. 7765 */ 7766 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7767 if (MptEvHandlers[cb_idx]) { 7768 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7769 "Routing Event to event handler #%d\n", 7770 ioc->name, cb_idx)); 7771 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); 7772 handlers++; 7773 } 7774 } 7775 /* FIXME? Examine results here? */ 7776 7777 /* 7778 * If needed, send (a single) EventAck. 7779 */ 7780 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { 7781 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7782 "EventAck required\n",ioc->name)); 7783 if ((ii = SendEventAck(ioc, pEventReply)) != 0) { 7784 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", 7785 ioc->name, ii)); 7786 } 7787 } 7788 7789 *evHandlers = handlers; 7790 return r; 7791 } 7792 7793 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7794 /** 7795 * mpt_fc_log_info - Log information returned from Fibre Channel IOC. 7796 * @ioc: Pointer to MPT_ADAPTER structure 7797 * @log_info: U32 LogInfo reply word from the IOC 7798 * 7799 * Refer to lsi/mpi_log_fc.h. 7800 */ 7801 static void 7802 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) 7803 { 7804 char *desc = "unknown"; 7805 7806 switch (log_info & 0xFF000000) { 7807 case MPI_IOCLOGINFO_FC_INIT_BASE: 7808 desc = "FCP Initiator"; 7809 break; 7810 case MPI_IOCLOGINFO_FC_TARGET_BASE: 7811 desc = "FCP Target"; 7812 break; 7813 case MPI_IOCLOGINFO_FC_LAN_BASE: 7814 desc = "LAN"; 7815 break; 7816 case MPI_IOCLOGINFO_FC_MSG_BASE: 7817 desc = "MPI Message Layer"; 7818 break; 7819 case MPI_IOCLOGINFO_FC_LINK_BASE: 7820 desc = "FC Link"; 7821 break; 7822 case MPI_IOCLOGINFO_FC_CTX_BASE: 7823 desc = "Context Manager"; 7824 break; 7825 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: 7826 desc = "Invalid Field Offset"; 7827 break; 7828 case MPI_IOCLOGINFO_FC_STATE_CHANGE: 7829 desc = "State Change Info"; 7830 break; 7831 } 7832 7833 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", 7834 ioc->name, log_info, desc, (log_info & 0xFFFFFF)); 7835 } 7836 7837 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7838 /** 7839 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. 7840 * @ioc: Pointer to MPT_ADAPTER structure 7841 * @log_info: U32 LogInfo word from the IOC 7842 * 7843 * Refer to lsi/sp_log.h. 7844 */ 7845 static void 7846 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) 7847 { 7848 u32 info = log_info & 0x00FF0000; 7849 char *desc = "unknown"; 7850 7851 switch (info) { 7852 case 0x00010000: 7853 desc = "bug! MID not found"; 7854 break; 7855 7856 case 0x00020000: 7857 desc = "Parity Error"; 7858 break; 7859 7860 case 0x00030000: 7861 desc = "ASYNC Outbound Overrun"; 7862 break; 7863 7864 case 0x00040000: 7865 desc = "SYNC Offset Error"; 7866 break; 7867 7868 case 0x00050000: 7869 desc = "BM Change"; 7870 break; 7871 7872 case 0x00060000: 7873 desc = "Msg In Overflow"; 7874 break; 7875 7876 case 0x00070000: 7877 desc = "DMA Error"; 7878 break; 7879 7880 case 0x00080000: 7881 desc = "Outbound DMA Overrun"; 7882 break; 7883 7884 case 0x00090000: 7885 desc = "Task Management"; 7886 break; 7887 7888 case 0x000A0000: 7889 desc = "Device Problem"; 7890 break; 7891 7892 case 0x000B0000: 7893 desc = "Invalid Phase Change"; 7894 break; 7895 7896 case 0x000C0000: 7897 desc = "Untagged Table Size"; 7898 break; 7899 7900 } 7901 7902 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); 7903 } 7904 7905 /* strings for sas loginfo */ 7906 static char *originator_str[] = { 7907 "IOP", /* 00h */ 7908 "PL", /* 01h */ 7909 "IR" /* 02h */ 7910 }; 7911 static char *iop_code_str[] = { 7912 NULL, /* 00h */ 7913 "Invalid SAS Address", /* 01h */ 7914 NULL, /* 02h */ 7915 "Invalid Page", /* 03h */ 7916 "Diag Message Error", /* 04h */ 7917 "Task Terminated", /* 05h */ 7918 "Enclosure Management", /* 06h */ 7919 "Target Mode" /* 07h */ 7920 }; 7921 static char *pl_code_str[] = { 7922 NULL, /* 00h */ 7923 "Open Failure", /* 01h */ 7924 "Invalid Scatter Gather List", /* 02h */ 7925 "Wrong Relative Offset or Frame Length", /* 03h */ 7926 "Frame Transfer Error", /* 04h */ 7927 "Transmit Frame Connected Low", /* 05h */ 7928 "SATA Non-NCQ RW Error Bit Set", /* 06h */ 7929 "SATA Read Log Receive Data Error", /* 07h */ 7930 "SATA NCQ Fail All Commands After Error", /* 08h */ 7931 "SATA Error in Receive Set Device Bit FIS", /* 09h */ 7932 "Receive Frame Invalid Message", /* 0Ah */ 7933 "Receive Context Message Valid Error", /* 0Bh */ 7934 "Receive Frame Current Frame Error", /* 0Ch */ 7935 "SATA Link Down", /* 0Dh */ 7936 "Discovery SATA Init W IOS", /* 0Eh */ 7937 "Config Invalid Page", /* 0Fh */ 7938 "Discovery SATA Init Timeout", /* 10h */ 7939 "Reset", /* 11h */ 7940 "Abort", /* 12h */ 7941 "IO Not Yet Executed", /* 13h */ 7942 "IO Executed", /* 14h */ 7943 "Persistent Reservation Out Not Affiliation " 7944 "Owner", /* 15h */ 7945 "Open Transmit DMA Abort", /* 16h */ 7946 "IO Device Missing Delay Retry", /* 17h */ 7947 "IO Cancelled Due to Receive Error", /* 18h */ 7948 NULL, /* 19h */ 7949 NULL, /* 1Ah */ 7950 NULL, /* 1Bh */ 7951 NULL, /* 1Ch */ 7952 NULL, /* 1Dh */ 7953 NULL, /* 1Eh */ 7954 NULL, /* 1Fh */ 7955 "Enclosure Management" /* 20h */ 7956 }; 7957 static char *ir_code_str[] = { 7958 "Raid Action Error", /* 00h */ 7959 NULL, /* 00h */ 7960 NULL, /* 01h */ 7961 NULL, /* 02h */ 7962 NULL, /* 03h */ 7963 NULL, /* 04h */ 7964 NULL, /* 05h */ 7965 NULL, /* 06h */ 7966 NULL /* 07h */ 7967 }; 7968 static char *raid_sub_code_str[] = { 7969 NULL, /* 00h */ 7970 "Volume Creation Failed: Data Passed too " 7971 "Large", /* 01h */ 7972 "Volume Creation Failed: Duplicate Volumes " 7973 "Attempted", /* 02h */ 7974 "Volume Creation Failed: Max Number " 7975 "Supported Volumes Exceeded", /* 03h */ 7976 "Volume Creation Failed: DMA Error", /* 04h */ 7977 "Volume Creation Failed: Invalid Volume Type", /* 05h */ 7978 "Volume Creation Failed: Error Reading " 7979 "MFG Page 4", /* 06h */ 7980 "Volume Creation Failed: Creating Internal " 7981 "Structures", /* 07h */ 7982 NULL, /* 08h */ 7983 NULL, /* 09h */ 7984 NULL, /* 0Ah */ 7985 NULL, /* 0Bh */ 7986 NULL, /* 0Ch */ 7987 NULL, /* 0Dh */ 7988 NULL, /* 0Eh */ 7989 NULL, /* 0Fh */ 7990 "Activation failed: Already Active Volume", /* 10h */ 7991 "Activation failed: Unsupported Volume Type", /* 11h */ 7992 "Activation failed: Too Many Active Volumes", /* 12h */ 7993 "Activation failed: Volume ID in Use", /* 13h */ 7994 "Activation failed: Reported Failure", /* 14h */ 7995 "Activation failed: Importing a Volume", /* 15h */ 7996 NULL, /* 16h */ 7997 NULL, /* 17h */ 7998 NULL, /* 18h */ 7999 NULL, /* 19h */ 8000 NULL, /* 1Ah */ 8001 NULL, /* 1Bh */ 8002 NULL, /* 1Ch */ 8003 NULL, /* 1Dh */ 8004 NULL, /* 1Eh */ 8005 NULL, /* 1Fh */ 8006 "Phys Disk failed: Too Many Phys Disks", /* 20h */ 8007 "Phys Disk failed: Data Passed too Large", /* 21h */ 8008 "Phys Disk failed: DMA Error", /* 22h */ 8009 "Phys Disk failed: Invalid <channel:id>", /* 23h */ 8010 "Phys Disk failed: Creating Phys Disk Config " 8011 "Page", /* 24h */ 8012 NULL, /* 25h */ 8013 NULL, /* 26h */ 8014 NULL, /* 27h */ 8015 NULL, /* 28h */ 8016 NULL, /* 29h */ 8017 NULL, /* 2Ah */ 8018 NULL, /* 2Bh */ 8019 NULL, /* 2Ch */ 8020 NULL, /* 2Dh */ 8021 NULL, /* 2Eh */ 8022 NULL, /* 2Fh */ 8023 "Compatibility Error: IR Disabled", /* 30h */ 8024 "Compatibility Error: Inquiry Command Failed", /* 31h */ 8025 "Compatibility Error: Device not Direct Access " 8026 "Device ", /* 32h */ 8027 "Compatibility Error: Removable Device Found", /* 33h */ 8028 "Compatibility Error: Device SCSI Version not " 8029 "2 or Higher", /* 34h */ 8030 "Compatibility Error: SATA Device, 48 BIT LBA " 8031 "not Supported", /* 35h */ 8032 "Compatibility Error: Device doesn't have " 8033 "512 Byte Block Sizes", /* 36h */ 8034 "Compatibility Error: Volume Type Check Failed", /* 37h */ 8035 "Compatibility Error: Volume Type is " 8036 "Unsupported by FW", /* 38h */ 8037 "Compatibility Error: Disk Drive too Small for " 8038 "use in Volume", /* 39h */ 8039 "Compatibility Error: Phys Disk for Create " 8040 "Volume not Found", /* 3Ah */ 8041 "Compatibility Error: Too Many or too Few " 8042 "Disks for Volume Type", /* 3Bh */ 8043 "Compatibility Error: Disk stripe Sizes " 8044 "Must be 64KB", /* 3Ch */ 8045 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ 8046 }; 8047 8048 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8049 /** 8050 * mpt_sas_log_info - Log information returned from SAS IOC. 8051 * @ioc: Pointer to MPT_ADAPTER structure 8052 * @log_info: U32 LogInfo reply word from the IOC 8053 * @cb_idx: callback function's handle 8054 * 8055 * Refer to lsi/mpi_log_sas.h. 8056 **/ 8057 static void 8058 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) 8059 { 8060 union loginfo_type { 8061 u32 loginfo; 8062 struct { 8063 u32 subcode:16; 8064 u32 code:8; 8065 u32 originator:4; 8066 u32 bus_type:4; 8067 } dw; 8068 }; 8069 union loginfo_type sas_loginfo; 8070 char *originator_desc = NULL; 8071 char *code_desc = NULL; 8072 char *sub_code_desc = NULL; 8073 8074 sas_loginfo.loginfo = log_info; 8075 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && 8076 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) 8077 return; 8078 8079 originator_desc = originator_str[sas_loginfo.dw.originator]; 8080 8081 switch (sas_loginfo.dw.originator) { 8082 8083 case 0: /* IOP */ 8084 if (sas_loginfo.dw.code < 8085 ARRAY_SIZE(iop_code_str)) 8086 code_desc = iop_code_str[sas_loginfo.dw.code]; 8087 break; 8088 case 1: /* PL */ 8089 if (sas_loginfo.dw.code < 8090 ARRAY_SIZE(pl_code_str)) 8091 code_desc = pl_code_str[sas_loginfo.dw.code]; 8092 break; 8093 case 2: /* IR */ 8094 if (sas_loginfo.dw.code >= 8095 ARRAY_SIZE(ir_code_str)) 8096 break; 8097 code_desc = ir_code_str[sas_loginfo.dw.code]; 8098 if (sas_loginfo.dw.subcode >= 8099 ARRAY_SIZE(raid_sub_code_str)) 8100 break; 8101 if (sas_loginfo.dw.code == 0) 8102 sub_code_desc = 8103 raid_sub_code_str[sas_loginfo.dw.subcode]; 8104 break; 8105 default: 8106 return; 8107 } 8108 8109 if (sub_code_desc != NULL) 8110 printk(MYIOC_s_INFO_FMT 8111 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8112 " SubCode={%s} cb_idx %s\n", 8113 ioc->name, log_info, originator_desc, code_desc, 8114 sub_code_desc, MptCallbacksName[cb_idx]); 8115 else if (code_desc != NULL) 8116 printk(MYIOC_s_INFO_FMT 8117 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8118 " SubCode(0x%04x) cb_idx %s\n", 8119 ioc->name, log_info, originator_desc, code_desc, 8120 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); 8121 else 8122 printk(MYIOC_s_INFO_FMT 8123 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," 8124 " SubCode(0x%04x) cb_idx %s\n", 8125 ioc->name, log_info, originator_desc, 8126 sas_loginfo.dw.code, sas_loginfo.dw.subcode, 8127 MptCallbacksName[cb_idx]); 8128 } 8129 8130 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8131 /** 8132 * mpt_iocstatus_info_config - IOCSTATUS information for config pages 8133 * @ioc: Pointer to MPT_ADAPTER structure 8134 * @ioc_status: U32 IOCStatus word from IOC 8135 * @mf: Pointer to MPT request frame 8136 * 8137 * Refer to lsi/mpi.h. 8138 **/ 8139 static void 8140 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8141 { 8142 Config_t *pReq = (Config_t *)mf; 8143 char extend_desc[EVENT_DESCR_STR_SZ]; 8144 char *desc = NULL; 8145 u32 form; 8146 u8 page_type; 8147 8148 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) 8149 page_type = pReq->ExtPageType; 8150 else 8151 page_type = pReq->Header.PageType; 8152 8153 /* 8154 * ignore invalid page messages for GET_NEXT_HANDLE 8155 */ 8156 form = le32_to_cpu(pReq->PageAddress); 8157 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 8158 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || 8159 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || 8160 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { 8161 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == 8162 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) 8163 return; 8164 } 8165 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) 8166 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == 8167 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 8168 return; 8169 } 8170 8171 snprintf(extend_desc, EVENT_DESCR_STR_SZ, 8172 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", 8173 page_type, pReq->Header.PageNumber, pReq->Action, form); 8174 8175 switch (ioc_status) { 8176 8177 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8178 desc = "Config Page Invalid Action"; 8179 break; 8180 8181 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8182 desc = "Config Page Invalid Type"; 8183 break; 8184 8185 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8186 desc = "Config Page Invalid Page"; 8187 break; 8188 8189 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8190 desc = "Config Page Invalid Data"; 8191 break; 8192 8193 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8194 desc = "Config Page No Defaults"; 8195 break; 8196 8197 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8198 desc = "Config Page Can't Commit"; 8199 break; 8200 } 8201 8202 if (!desc) 8203 return; 8204 8205 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", 8206 ioc->name, ioc_status, desc, extend_desc)); 8207 } 8208 8209 /** 8210 * mpt_iocstatus_info - IOCSTATUS information returned from IOC. 8211 * @ioc: Pointer to MPT_ADAPTER structure 8212 * @ioc_status: U32 IOCStatus word from IOC 8213 * @mf: Pointer to MPT request frame 8214 * 8215 * Refer to lsi/mpi.h. 8216 **/ 8217 static void 8218 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8219 { 8220 u32 status = ioc_status & MPI_IOCSTATUS_MASK; 8221 char *desc = NULL; 8222 8223 switch (status) { 8224 8225 /****************************************************************************/ 8226 /* Common IOCStatus values for all replies */ 8227 /****************************************************************************/ 8228 8229 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 8230 desc = "Invalid Function"; 8231 break; 8232 8233 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 8234 desc = "Busy"; 8235 break; 8236 8237 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 8238 desc = "Invalid SGL"; 8239 break; 8240 8241 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 8242 desc = "Internal Error"; 8243 break; 8244 8245 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 8246 desc = "Reserved"; 8247 break; 8248 8249 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 8250 desc = "Insufficient Resources"; 8251 break; 8252 8253 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 8254 desc = "Invalid Field"; 8255 break; 8256 8257 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 8258 desc = "Invalid State"; 8259 break; 8260 8261 /****************************************************************************/ 8262 /* Config IOCStatus values */ 8263 /****************************************************************************/ 8264 8265 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8266 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8267 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8268 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8269 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8270 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8271 mpt_iocstatus_info_config(ioc, status, mf); 8272 break; 8273 8274 /****************************************************************************/ 8275 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */ 8276 /* */ 8277 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ 8278 /* */ 8279 /****************************************************************************/ 8280 8281 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 8282 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 8283 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 8284 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 8285 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 8286 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 8287 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 8288 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 8289 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 8290 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 8291 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 8292 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 8293 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 8294 break; 8295 8296 /****************************************************************************/ 8297 /* SCSI Target values */ 8298 /****************************************************************************/ 8299 8300 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ 8301 desc = "Target: Priority IO"; 8302 break; 8303 8304 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ 8305 desc = "Target: Invalid Port"; 8306 break; 8307 8308 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ 8309 desc = "Target Invalid IO Index:"; 8310 break; 8311 8312 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ 8313 desc = "Target: Aborted"; 8314 break; 8315 8316 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ 8317 desc = "Target: No Conn Retryable"; 8318 break; 8319 8320 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ 8321 desc = "Target: No Connection"; 8322 break; 8323 8324 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ 8325 desc = "Target: Transfer Count Mismatch"; 8326 break; 8327 8328 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ 8329 desc = "Target: STS Data not Sent"; 8330 break; 8331 8332 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ 8333 desc = "Target: Data Offset Error"; 8334 break; 8335 8336 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ 8337 desc = "Target: Too Much Write Data"; 8338 break; 8339 8340 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ 8341 desc = "Target: IU Too Short"; 8342 break; 8343 8344 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ 8345 desc = "Target: ACK NAK Timeout"; 8346 break; 8347 8348 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ 8349 desc = "Target: Nak Received"; 8350 break; 8351 8352 /****************************************************************************/ 8353 /* Fibre Channel Direct Access values */ 8354 /****************************************************************************/ 8355 8356 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ 8357 desc = "FC: Aborted"; 8358 break; 8359 8360 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ 8361 desc = "FC: RX ID Invalid"; 8362 break; 8363 8364 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ 8365 desc = "FC: DID Invalid"; 8366 break; 8367 8368 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ 8369 desc = "FC: Node Logged Out"; 8370 break; 8371 8372 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ 8373 desc = "FC: Exchange Canceled"; 8374 break; 8375 8376 /****************************************************************************/ 8377 /* LAN values */ 8378 /****************************************************************************/ 8379 8380 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ 8381 desc = "LAN: Device not Found"; 8382 break; 8383 8384 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ 8385 desc = "LAN: Device Failure"; 8386 break; 8387 8388 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ 8389 desc = "LAN: Transmit Error"; 8390 break; 8391 8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ 8393 desc = "LAN: Transmit Aborted"; 8394 break; 8395 8396 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ 8397 desc = "LAN: Receive Error"; 8398 break; 8399 8400 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ 8401 desc = "LAN: Receive Aborted"; 8402 break; 8403 8404 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ 8405 desc = "LAN: Partial Packet"; 8406 break; 8407 8408 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ 8409 desc = "LAN: Canceled"; 8410 break; 8411 8412 /****************************************************************************/ 8413 /* Serial Attached SCSI values */ 8414 /****************************************************************************/ 8415 8416 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ 8417 desc = "SAS: SMP Request Failed"; 8418 break; 8419 8420 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ 8421 desc = "SAS: SMP Data Overrun"; 8422 break; 8423 8424 default: 8425 desc = "Others"; 8426 break; 8427 } 8428 8429 if (!desc) 8430 return; 8431 8432 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", 8433 ioc->name, status, desc)); 8434 } 8435 8436 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8437 EXPORT_SYMBOL(mpt_attach); 8438 EXPORT_SYMBOL(mpt_detach); 8439 #ifdef CONFIG_PM 8440 EXPORT_SYMBOL(mpt_resume); 8441 EXPORT_SYMBOL(mpt_suspend); 8442 #endif 8443 EXPORT_SYMBOL(ioc_list); 8444 EXPORT_SYMBOL(mpt_register); 8445 EXPORT_SYMBOL(mpt_deregister); 8446 EXPORT_SYMBOL(mpt_event_register); 8447 EXPORT_SYMBOL(mpt_event_deregister); 8448 EXPORT_SYMBOL(mpt_reset_register); 8449 EXPORT_SYMBOL(mpt_reset_deregister); 8450 EXPORT_SYMBOL(mpt_device_driver_register); 8451 EXPORT_SYMBOL(mpt_device_driver_deregister); 8452 EXPORT_SYMBOL(mpt_get_msg_frame); 8453 EXPORT_SYMBOL(mpt_put_msg_frame); 8454 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); 8455 EXPORT_SYMBOL(mpt_free_msg_frame); 8456 EXPORT_SYMBOL(mpt_send_handshake_request); 8457 EXPORT_SYMBOL(mpt_verify_adapter); 8458 EXPORT_SYMBOL(mpt_GetIocState); 8459 EXPORT_SYMBOL(mpt_print_ioc_summary); 8460 EXPORT_SYMBOL(mpt_HardResetHandler); 8461 EXPORT_SYMBOL(mpt_config); 8462 EXPORT_SYMBOL(mpt_findImVolumes); 8463 EXPORT_SYMBOL(mpt_alloc_fw_memory); 8464 EXPORT_SYMBOL(mpt_free_fw_memory); 8465 EXPORT_SYMBOL(mptbase_sas_persist_operation); 8466 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); 8467 8468 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8469 /** 8470 * fusion_init - Fusion MPT base driver initialization routine. 8471 * 8472 * Returns 0 for success, non-zero for failure. 8473 */ 8474 static int __init 8475 fusion_init(void) 8476 { 8477 u8 cb_idx; 8478 8479 show_mptmod_ver(my_NAME, my_VERSION); 8480 printk(KERN_INFO COPYRIGHT "\n"); 8481 8482 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 8483 MptCallbacks[cb_idx] = NULL; 8484 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 8485 MptEvHandlers[cb_idx] = NULL; 8486 MptResetHandlers[cb_idx] = NULL; 8487 } 8488 8489 /* Register ourselves (mptbase) in order to facilitate 8490 * EventNotification handling. 8491 */ 8492 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, 8493 "mptbase_reply"); 8494 8495 /* Register for hard reset handling callbacks. 8496 */ 8497 mpt_reset_register(mpt_base_index, mpt_ioc_reset); 8498 8499 #ifdef CONFIG_PROC_FS 8500 (void) procmpt_create(); 8501 #endif 8502 return 0; 8503 } 8504 8505 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8506 /** 8507 * fusion_exit - Perform driver unload cleanup. 8508 * 8509 * This routine frees all resources associated with each MPT adapter 8510 * and removes all %MPT_PROCFS_MPTBASEDIR entries. 8511 */ 8512 static void __exit 8513 fusion_exit(void) 8514 { 8515 8516 mpt_reset_deregister(mpt_base_index); 8517 8518 #ifdef CONFIG_PROC_FS 8519 procmpt_destroy(); 8520 #endif 8521 } 8522 8523 module_init(fusion_init); 8524 module_exit(fusion_exit); 8525