1 /* 2 * linux/drivers/message/fusion/mptbase.c 3 * This is the Fusion MPT base driver which supports multiple 4 * (SCSI + LAN) specialized protocol drivers. 5 * For use with LSI PCI chip/adapter(s) 6 * running LSI Fusion MPT (Message Passing Technology) firmware. 7 * 8 * Copyright (c) 1999-2008 LSI Corporation 9 * (mailto:DL-MPTFusionLinux@lsi.com) 10 * 11 */ 12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 13 /* 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; version 2 of the License. 17 18 This program is distributed in the hope that it will be useful, 19 but WITHOUT ANY WARRANTY; without even the implied warranty of 20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 GNU General Public License for more details. 22 23 NO WARRANTY 24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 28 solely responsible for determining the appropriateness of using and 29 distributing the Program and assumes all risks associated with its 30 exercise of rights under this Agreement, including but not limited to 31 the risks and costs of program errors, damage to or loss of data, 32 programs or equipment, and unavailability or interruption of operations. 33 34 DISCLAIMER OF LIABILITY 35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 42 43 You should have received a copy of the GNU General Public License 44 along with this program; if not, write to the Free Software 45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 46 */ 47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 48 49 #include <linux/kernel.h> 50 #include <linux/module.h> 51 #include <linux/errno.h> 52 #include <linux/init.h> 53 #include <linux/seq_file.h> 54 #include <linux/slab.h> 55 #include <linux/types.h> 56 #include <linux/pci.h> 57 #include <linux/kdev_t.h> 58 #include <linux/blkdev.h> 59 #include <linux/delay.h> 60 #include <linux/interrupt.h> 61 #include <linux/dma-mapping.h> 62 #include <linux/kthread.h> 63 #include <scsi/scsi_host.h> 64 65 #include "mptbase.h" 66 #include "lsi/mpi_log_fc.h" 67 68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 69 #define my_NAME "Fusion MPT base driver" 70 #define my_VERSION MPT_LINUX_VERSION_COMMON 71 #define MYNAM "mptbase" 72 73 MODULE_AUTHOR(MODULEAUTHOR); 74 MODULE_DESCRIPTION(my_NAME); 75 MODULE_LICENSE("GPL"); 76 MODULE_VERSION(my_VERSION); 77 78 /* 79 * cmd line parameters 80 */ 81 82 static int mpt_msi_enable_spi; 83 module_param(mpt_msi_enable_spi, int, 0); 84 MODULE_PARM_DESC(mpt_msi_enable_spi, 85 " Enable MSI Support for SPI controllers (default=0)"); 86 87 static int mpt_msi_enable_fc; 88 module_param(mpt_msi_enable_fc, int, 0); 89 MODULE_PARM_DESC(mpt_msi_enable_fc, 90 " Enable MSI Support for FC controllers (default=0)"); 91 92 static int mpt_msi_enable_sas; 93 module_param(mpt_msi_enable_sas, int, 0); 94 MODULE_PARM_DESC(mpt_msi_enable_sas, 95 " Enable MSI Support for SAS controllers (default=0)"); 96 97 static int mpt_channel_mapping; 98 module_param(mpt_channel_mapping, int, 0); 99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); 100 101 static int mpt_debug_level; 102 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp); 103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, 104 &mpt_debug_level, 0600); 105 MODULE_PARM_DESC(mpt_debug_level, 106 " debug level - refer to mptdebug.h - (default=0)"); 107 108 int mpt_fwfault_debug; 109 EXPORT_SYMBOL(mpt_fwfault_debug); 110 module_param(mpt_fwfault_debug, int, 0600); 111 MODULE_PARM_DESC(mpt_fwfault_debug, 112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); 113 114 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] 115 [MPT_MAX_CALLBACKNAME_LEN+1]; 116 117 #ifdef MFCNT 118 static int mfcounter = 0; 119 #define PRINT_MF_COUNT 20000 120 #endif 121 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 123 /* 124 * Public data... 125 */ 126 127 #define WHOINIT_UNKNOWN 0xAA 128 129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 130 /* 131 * Private data... 132 */ 133 /* Adapter link list */ 134 LIST_HEAD(ioc_list); 135 /* Callback lookup table */ 136 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; 137 /* Protocol driver class lookup table */ 138 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; 139 /* Event handler lookup table */ 140 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 141 /* Reset handler lookup table */ 142 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 143 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 144 145 #ifdef CONFIG_PROC_FS 146 static struct proc_dir_entry *mpt_proc_root_dir; 147 #endif 148 149 /* 150 * Driver Callback Index's 151 */ 152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; 153 static u8 last_drv_idx; 154 155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 156 /* 157 * Forward protos... 158 */ 159 static irqreturn_t mpt_interrupt(int irq, void *bus_id); 160 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 161 MPT_FRAME_HDR *reply); 162 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, 163 u32 *req, int replyBytes, u16 *u16reply, int maxwait, 164 int sleepFlag); 165 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); 166 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); 167 static void mpt_adapter_disable(MPT_ADAPTER *ioc); 168 static void mpt_adapter_dispose(MPT_ADAPTER *ioc); 169 170 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); 171 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); 172 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); 173 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 174 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); 175 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 176 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); 177 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); 178 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 179 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 180 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); 181 static int PrimeIocFifos(MPT_ADAPTER *ioc); 182 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 183 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 184 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 185 static int GetLanConfigPages(MPT_ADAPTER *ioc); 186 static int GetIoUnitPage2(MPT_ADAPTER *ioc); 187 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); 188 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); 189 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); 190 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); 191 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); 192 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); 193 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, 194 int sleepFlag); 195 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); 196 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); 197 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); 198 199 #ifdef CONFIG_PROC_FS 200 static int mpt_summary_proc_show(struct seq_file *m, void *v); 201 static int mpt_version_proc_show(struct seq_file *m, void *v); 202 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v); 203 #endif 204 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); 205 206 static int ProcessEventNotification(MPT_ADAPTER *ioc, 207 EventNotificationReply_t *evReply, int *evHandlers); 208 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); 209 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); 210 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); 211 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); 212 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); 213 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); 214 215 /* module entry point */ 216 static int __init fusion_init (void); 217 static void __exit fusion_exit (void); 218 219 #define CHIPREG_READ32(addr) readl_relaxed(addr) 220 #define CHIPREG_READ32_dmasync(addr) readl(addr) 221 #define CHIPREG_WRITE32(addr,val) writel(val, addr) 222 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) 223 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) 224 225 static void 226 pci_disable_io_access(struct pci_dev *pdev) 227 { 228 u16 command_reg; 229 230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 231 command_reg &= ~1; 232 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 233 } 234 235 static void 236 pci_enable_io_access(struct pci_dev *pdev) 237 { 238 u16 command_reg; 239 240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 241 command_reg |= 1; 242 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 243 } 244 245 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp) 246 { 247 int ret = param_set_int(val, kp); 248 MPT_ADAPTER *ioc; 249 250 if (ret) 251 return ret; 252 253 list_for_each_entry(ioc, &ioc_list, list) 254 ioc->debug_level = mpt_debug_level; 255 return 0; 256 } 257 258 /** 259 * mpt_get_cb_idx - obtain cb_idx for registered driver 260 * @dclass: class driver enum 261 * 262 * Returns cb_idx, or zero means it wasn't found 263 **/ 264 static u8 265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) 266 { 267 u8 cb_idx; 268 269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) 270 if (MptDriverClass[cb_idx] == dclass) 271 return cb_idx; 272 return 0; 273 } 274 275 /** 276 * mpt_is_discovery_complete - determine if discovery has completed 277 * @ioc: per adatper instance 278 * 279 * Returns 1 when discovery completed, else zero. 280 */ 281 static int 282 mpt_is_discovery_complete(MPT_ADAPTER *ioc) 283 { 284 ConfigExtendedPageHeader_t hdr; 285 CONFIGPARMS cfg; 286 SasIOUnitPage0_t *buffer; 287 dma_addr_t dma_handle; 288 int rc = 0; 289 290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); 291 memset(&cfg, 0, sizeof(CONFIGPARMS)); 292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; 293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 295 cfg.cfghdr.ehdr = &hdr; 296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 297 298 if ((mpt_config(ioc, &cfg))) 299 goto out; 300 if (!hdr.ExtPageLength) 301 goto out; 302 303 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, 304 &dma_handle, GFP_KERNEL); 305 if (!buffer) 306 goto out; 307 308 cfg.physAddr = dma_handle; 309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 310 311 if ((mpt_config(ioc, &cfg))) 312 goto out_free_consistent; 313 314 if (!(buffer->PhyData[0].PortFlags & 315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) 316 rc = 1; 317 318 out_free_consistent: 319 dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, 320 dma_handle); 321 out: 322 return rc; 323 } 324 325 326 /** 327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc 328 * @arg: input argument, used to derive ioc 329 * 330 * Return 0 if controller is removed from pci subsystem. 331 * Return -1 for other case. 332 */ 333 static int mpt_remove_dead_ioc_func(void *arg) 334 { 335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; 336 struct pci_dev *pdev; 337 338 if (!ioc) 339 return -1; 340 341 pdev = ioc->pcidev; 342 if (!pdev) 343 return -1; 344 345 pci_stop_and_remove_bus_device_locked(pdev); 346 return 0; 347 } 348 349 350 351 /** 352 * mpt_fault_reset_work - work performed on workq after ioc fault 353 * @work: input argument, used to derive ioc 354 * 355 **/ 356 static void 357 mpt_fault_reset_work(struct work_struct *work) 358 { 359 MPT_ADAPTER *ioc = 360 container_of(work, MPT_ADAPTER, fault_reset_work.work); 361 u32 ioc_raw_state; 362 int rc; 363 unsigned long flags; 364 MPT_SCSI_HOST *hd; 365 struct task_struct *p; 366 367 if (ioc->ioc_reset_in_progress || !ioc->active) 368 goto out; 369 370 371 ioc_raw_state = mpt_GetIocState(ioc, 0); 372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { 373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", 374 ioc->name, __func__); 375 376 /* 377 * Call mptscsih_flush_pending_cmds callback so that we 378 * flush all pending commands back to OS. 379 * This call is required to aovid deadlock at block layer. 380 * Dead IOC will fail to do diag reset,and this call is safe 381 * since dead ioc will never return any command back from HW. 382 */ 383 hd = shost_priv(ioc->sh); 384 ioc->schedule_dead_ioc_flush_running_cmds(hd); 385 386 /*Remove the Dead Host */ 387 p = kthread_run(mpt_remove_dead_ioc_func, ioc, 388 "mpt_dead_ioc_%d", ioc->id); 389 if (IS_ERR(p)) { 390 printk(MYIOC_s_ERR_FMT 391 "%s: Running mpt_dead_ioc thread failed !\n", 392 ioc->name, __func__); 393 } else { 394 printk(MYIOC_s_WARN_FMT 395 "%s: Running mpt_dead_ioc thread success !\n", 396 ioc->name, __func__); 397 } 398 return; /* don't rearm timer */ 399 } 400 401 if ((ioc_raw_state & MPI_IOC_STATE_MASK) 402 == MPI_IOC_STATE_FAULT) { 403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", 404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 406 ioc->name, __func__); 407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP); 408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, 409 __func__, (rc == 0) ? "success" : "failed"); 410 ioc_raw_state = mpt_GetIocState(ioc, 0); 411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) 412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " 413 "reset (%04xh)\n", ioc->name, ioc_raw_state & 414 MPI_DOORBELL_DATA_MASK); 415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { 416 if ((mpt_is_discovery_complete(ioc))) { 417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " 418 "discovery_quiesce_io flag\n", ioc->name)); 419 ioc->sas_discovery_quiesce_io = 0; 420 } 421 } 422 423 out: 424 /* 425 * Take turns polling alternate controller 426 */ 427 if (ioc->alt_ioc) 428 ioc = ioc->alt_ioc; 429 430 /* rearm the timer */ 431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 432 if (ioc->reset_work_q) 433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 434 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 436 } 437 438 439 /* 440 * Process turbo (context) reply... 441 */ 442 static void 443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) 444 { 445 MPT_FRAME_HDR *mf = NULL; 446 MPT_FRAME_HDR *mr = NULL; 447 u16 req_idx = 0; 448 u8 cb_idx; 449 450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", 451 ioc->name, pa)); 452 453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { 454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: 455 req_idx = pa & 0x0000FFFF; 456 cb_idx = (pa & 0x00FF0000) >> 16; 457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 458 break; 459 case MPI_CONTEXT_REPLY_TYPE_LAN: 460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); 461 /* 462 * Blind set of mf to NULL here was fatal 463 * after lan_reply says "freeme" 464 * Fix sort of combined with an optimization here; 465 * added explicit check for case where lan_reply 466 * was just returning 1 and doing nothing else. 467 * For this case skip the callback, but set up 468 * proper mf value first here:-) 469 */ 470 if ((pa & 0x58000000) == 0x58000000) { 471 req_idx = pa & 0x0000FFFF; 472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 473 mpt_free_msg_frame(ioc, mf); 474 mb(); 475 return; 476 } 477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 478 break; 479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: 480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); 481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 482 break; 483 default: 484 cb_idx = 0; 485 BUG(); 486 } 487 488 /* Check for (valid) IO callback! */ 489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 490 MptCallbacks[cb_idx] == NULL) { 491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 492 __func__, ioc->name, cb_idx); 493 goto out; 494 } 495 496 if (MptCallbacks[cb_idx](ioc, mf, mr)) 497 mpt_free_msg_frame(ioc, mf); 498 out: 499 mb(); 500 } 501 502 static void 503 mpt_reply(MPT_ADAPTER *ioc, u32 pa) 504 { 505 MPT_FRAME_HDR *mf; 506 MPT_FRAME_HDR *mr; 507 u16 req_idx; 508 u8 cb_idx; 509 int freeme; 510 511 u32 reply_dma_low; 512 u16 ioc_stat; 513 514 /* non-TURBO reply! Hmmm, something may be up... 515 * Newest turbo reply mechanism; get address 516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! 517 */ 518 519 /* Map DMA address of reply header to cpu address. 520 * pa is 32 bits - but the dma address may be 32 or 64 bits 521 * get offset based only only the low addresses 522 */ 523 524 reply_dma_low = (pa <<= 1); 525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + 526 (reply_dma_low - ioc->reply_frames_low_dma)); 527 528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); 529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; 530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 531 532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", 533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); 534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); 535 536 /* Check/log IOC log info 537 */ 538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); 539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { 540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); 541 if (ioc->bus_type == FC) 542 mpt_fc_log_info(ioc, log_info); 543 else if (ioc->bus_type == SPI) 544 mpt_spi_log_info(ioc, log_info); 545 else if (ioc->bus_type == SAS) 546 mpt_sas_log_info(ioc, log_info, cb_idx); 547 } 548 549 if (ioc_stat & MPI_IOCSTATUS_MASK) 550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); 551 552 /* Check for (valid) IO callback! */ 553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 554 MptCallbacks[cb_idx] == NULL) { 555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 556 __func__, ioc->name, cb_idx); 557 freeme = 0; 558 goto out; 559 } 560 561 freeme = MptCallbacks[cb_idx](ioc, mf, mr); 562 563 out: 564 /* Flush (non-TURBO) reply with a WRITE! */ 565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); 566 567 if (freeme) 568 mpt_free_msg_frame(ioc, mf); 569 mb(); 570 } 571 572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 573 /** 574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. 575 * @irq: irq number (not used) 576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure 577 * 578 * This routine is registered via the request_irq() kernel API call, 579 * and handles all interrupts generated from a specific MPT adapter 580 * (also referred to as a IO Controller or IOC). 581 * This routine must clear the interrupt from the adapter and does 582 * so by reading the reply FIFO. Multiple replies may be processed 583 * per single call to this routine. 584 * 585 * This routine handles register-level access of the adapter but 586 * dispatches (calls) a protocol-specific callback routine to handle 587 * the protocol-specific details of the MPT request completion. 588 */ 589 static irqreturn_t 590 mpt_interrupt(int irq, void *bus_id) 591 { 592 MPT_ADAPTER *ioc = bus_id; 593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 594 595 if (pa == 0xFFFFFFFF) 596 return IRQ_NONE; 597 598 /* 599 * Drain the reply FIFO! 600 */ 601 do { 602 if (pa & MPI_ADDRESS_REPLY_A_BIT) 603 mpt_reply(ioc, pa); 604 else 605 mpt_turbo_reply(ioc, pa); 606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 607 } while (pa != 0xFFFFFFFF); 608 609 return IRQ_HANDLED; 610 } 611 612 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 613 /** 614 * mptbase_reply - MPT base driver's callback routine 615 * @ioc: Pointer to MPT_ADAPTER structure 616 * @req: Pointer to original MPT request frame 617 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 618 * 619 * MPT base driver's callback routine; all base driver 620 * "internal" request/reply processing is routed here. 621 * Currently used for EventNotification and EventAck handling. 622 * 623 * Returns 1 indicating original alloc'd request frame ptr 624 * should be freed, or 0 if it shouldn't. 625 */ 626 static int 627 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 628 { 629 EventNotificationReply_t *pEventReply; 630 u8 event; 631 int evHandlers; 632 int freereq = 1; 633 634 switch (reply->u.hdr.Function) { 635 case MPI_FUNCTION_EVENT_NOTIFICATION: 636 pEventReply = (EventNotificationReply_t *)reply; 637 evHandlers = 0; 638 ProcessEventNotification(ioc, pEventReply, &evHandlers); 639 event = le32_to_cpu(pEventReply->Event) & 0xFF; 640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) 641 freereq = 0; 642 if (event != MPI_EVENT_EVENT_CHANGE) 643 break; 644 fallthrough; 645 case MPI_FUNCTION_CONFIG: 646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 649 memcpy(ioc->mptbase_cmds.reply, reply, 650 min(MPT_DEFAULT_FRAME_SIZE, 651 4 * reply->u.reply.MsgLength)); 652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 654 complete(&ioc->mptbase_cmds.done); 655 } else 656 freereq = 0; 657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) 658 freereq = 1; 659 break; 660 case MPI_FUNCTION_EVENT_ACK: 661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 662 "EventAck reply received\n", ioc->name)); 663 break; 664 default: 665 printk(MYIOC_s_ERR_FMT 666 "Unexpected msg function (=%02Xh) reply received!\n", 667 ioc->name, reply->u.hdr.Function); 668 break; 669 } 670 671 /* 672 * Conditionally tell caller to free the original 673 * EventNotification/EventAck/unexpected request frame! 674 */ 675 return freereq; 676 } 677 678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 679 /** 680 * mpt_register - Register protocol-specific main callback handler. 681 * @cbfunc: callback function pointer 682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) 683 * @func_name: call function's name 684 * 685 * This routine is called by a protocol-specific driver (SCSI host, 686 * LAN, SCSI target) to register its reply callback routine. Each 687 * protocol-specific driver must do this before it will be able to 688 * use any IOC resources, such as obtaining request frames. 689 * 690 * NOTES: The SCSI protocol driver currently calls this routine thrice 691 * in order to register separate callbacks; one for "normal" SCSI IO; 692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests. 693 * 694 * Returns u8 valued "handle" in the range (and S.O.D. order) 695 * {N,...,7,6,5,...,1} if successful. 696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be 697 * considered an error by the caller. 698 */ 699 u8 700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) 701 { 702 u8 cb_idx; 703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; 704 705 /* 706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1} 707 * (slot/handle 0 is reserved!) 708 */ 709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 710 if (MptCallbacks[cb_idx] == NULL) { 711 MptCallbacks[cb_idx] = cbfunc; 712 MptDriverClass[cb_idx] = dclass; 713 MptEvHandlers[cb_idx] = NULL; 714 last_drv_idx = cb_idx; 715 strscpy(MptCallbacksName[cb_idx], func_name, 716 MPT_MAX_CALLBACKNAME_LEN+1); 717 break; 718 } 719 } 720 721 return last_drv_idx; 722 } 723 724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 725 /** 726 * mpt_deregister - Deregister a protocol drivers resources. 727 * @cb_idx: previously registered callback handle 728 * 729 * Each protocol-specific driver should call this routine when its 730 * module is unloaded. 731 */ 732 void 733 mpt_deregister(u8 cb_idx) 734 { 735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { 736 MptCallbacks[cb_idx] = NULL; 737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 738 MptEvHandlers[cb_idx] = NULL; 739 740 last_drv_idx++; 741 } 742 } 743 744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 745 /** 746 * mpt_event_register - Register protocol-specific event callback handler. 747 * @cb_idx: previously registered (via mpt_register) callback handle 748 * @ev_cbfunc: callback function 749 * 750 * This routine can be called by one or more protocol-specific drivers 751 * if/when they choose to be notified of MPT events. 752 * 753 * Returns 0 for success. 754 */ 755 int 756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) 757 { 758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 759 return -1; 760 761 MptEvHandlers[cb_idx] = ev_cbfunc; 762 return 0; 763 } 764 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 766 /** 767 * mpt_event_deregister - Deregister protocol-specific event callback handler 768 * @cb_idx: previously registered callback handle 769 * 770 * Each protocol-specific driver should call this routine 771 * when it does not (or can no longer) handle events, 772 * or when its module is unloaded. 773 */ 774 void 775 mpt_event_deregister(u8 cb_idx) 776 { 777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 778 return; 779 780 MptEvHandlers[cb_idx] = NULL; 781 } 782 783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 784 /** 785 * mpt_reset_register - Register protocol-specific IOC reset handler. 786 * @cb_idx: previously registered (via mpt_register) callback handle 787 * @reset_func: reset function 788 * 789 * This routine can be called by one or more protocol-specific drivers 790 * if/when they choose to be notified of IOC resets. 791 * 792 * Returns 0 for success. 793 */ 794 int 795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) 796 { 797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 798 return -1; 799 800 MptResetHandlers[cb_idx] = reset_func; 801 return 0; 802 } 803 804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 805 /** 806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. 807 * @cb_idx: previously registered callback handle 808 * 809 * Each protocol-specific driver should call this routine 810 * when it does not (or can no longer) handle IOC reset handling, 811 * or when its module is unloaded. 812 */ 813 void 814 mpt_reset_deregister(u8 cb_idx) 815 { 816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 817 return; 818 819 MptResetHandlers[cb_idx] = NULL; 820 } 821 822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 823 /** 824 * mpt_device_driver_register - Register device driver hooks 825 * @dd_cbfunc: driver callbacks struct 826 * @cb_idx: MPT protocol driver index 827 */ 828 int 829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) 830 { 831 MPT_ADAPTER *ioc; 832 833 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 834 return -EINVAL; 835 836 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; 837 838 /* call per pci device probe entry point */ 839 list_for_each_entry(ioc, &ioc_list, list) { 840 if (dd_cbfunc->probe) 841 dd_cbfunc->probe(ioc->pcidev); 842 } 843 844 return 0; 845 } 846 847 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 848 /** 849 * mpt_device_driver_deregister - DeRegister device driver hooks 850 * @cb_idx: MPT protocol driver index 851 */ 852 void 853 mpt_device_driver_deregister(u8 cb_idx) 854 { 855 struct mpt_pci_driver *dd_cbfunc; 856 MPT_ADAPTER *ioc; 857 858 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 859 return; 860 861 dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; 862 863 list_for_each_entry(ioc, &ioc_list, list) { 864 if (dd_cbfunc->remove) 865 dd_cbfunc->remove(ioc->pcidev); 866 } 867 868 MptDeviceDriverHandlers[cb_idx] = NULL; 869 } 870 871 872 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 873 /** 874 * mpt_get_msg_frame - Obtain an MPT request frame from the pool 875 * @cb_idx: Handle of registered MPT protocol driver 876 * @ioc: Pointer to MPT adapter structure 877 * 878 * Obtain an MPT request frame from the pool (of 1024) that are 879 * allocated per MPT adapter. 880 * 881 * Returns pointer to a MPT request frame or %NULL if none are available 882 * or IOC is not active. 883 */ 884 MPT_FRAME_HDR* 885 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) 886 { 887 MPT_FRAME_HDR *mf; 888 unsigned long flags; 889 u16 req_idx; /* Request index */ 890 891 /* validate handle and ioc identifier */ 892 893 #ifdef MFCNT 894 if (!ioc->active) 895 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " 896 "returning NULL!\n", ioc->name); 897 #endif 898 899 /* If interrupts are not attached, do not return a request frame */ 900 if (!ioc->active) 901 return NULL; 902 903 spin_lock_irqsave(&ioc->FreeQlock, flags); 904 if (!list_empty(&ioc->FreeQ)) { 905 int req_offset; 906 907 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, 908 u.frame.linkage.list); 909 list_del(&mf->u.frame.linkage.list); 910 mf->u.frame.linkage.arg1 = 0; 911 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 912 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 913 /* u16! */ 914 req_idx = req_offset / ioc->req_sz; 915 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 916 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 917 /* Default, will be changed if necessary in SG generation */ 918 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; 919 #ifdef MFCNT 920 ioc->mfcnt++; 921 #endif 922 } 923 else 924 mf = NULL; 925 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 926 927 #ifdef MFCNT 928 if (mf == NULL) 929 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " 930 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, 931 ioc->req_depth); 932 mfcounter++; 933 if (mfcounter == PRINT_MF_COUNT) 934 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, 935 ioc->mfcnt, ioc->req_depth); 936 #endif 937 938 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", 939 ioc->name, cb_idx, ioc->id, mf)); 940 return mf; 941 } 942 943 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 944 /** 945 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC 946 * @cb_idx: Handle of registered MPT protocol driver 947 * @ioc: Pointer to MPT adapter structure 948 * @mf: Pointer to MPT request frame 949 * 950 * This routine posts an MPT request frame to the request post FIFO of a 951 * specific MPT adapter. 952 */ 953 void 954 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 955 { 956 u32 mf_dma_addr; 957 int req_offset; 958 u16 req_idx; /* Request index */ 959 960 /* ensure values are reset properly! */ 961 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 962 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 963 /* u16! */ 964 req_idx = req_offset / ioc->req_sz; 965 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 966 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 967 968 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 969 970 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; 971 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " 972 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, 973 ioc->RequestNB[req_idx])); 974 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); 975 } 976 977 /** 978 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame 979 * @cb_idx: Handle of registered MPT protocol driver 980 * @ioc: Pointer to MPT adapter structure 981 * @mf: Pointer to MPT request frame 982 * 983 * Send a protocol-specific MPT request frame to an IOC using 984 * hi-priority request queue. 985 * 986 * This routine posts an MPT request frame to the request post FIFO of a 987 * specific MPT adapter. 988 **/ 989 void 990 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 991 { 992 u32 mf_dma_addr; 993 int req_offset; 994 u16 req_idx; /* Request index */ 995 996 /* ensure values are reset properly! */ 997 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 998 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 999 req_idx = req_offset / ioc->req_sz; 1000 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 1001 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 1002 1003 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 1004 1005 mf_dma_addr = (ioc->req_frames_low_dma + req_offset); 1006 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", 1007 ioc->name, mf_dma_addr, req_idx)); 1008 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); 1009 } 1010 1011 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1012 /** 1013 * mpt_free_msg_frame - Place MPT request frame back on FreeQ. 1014 * @ioc: Pointer to MPT adapter structure 1015 * @mf: Pointer to MPT request frame 1016 * 1017 * This routine places a MPT request frame back on the MPT adapter's 1018 * FreeQ. 1019 */ 1020 void 1021 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 1022 { 1023 unsigned long flags; 1024 1025 /* Put Request back on FreeQ! */ 1026 spin_lock_irqsave(&ioc->FreeQlock, flags); 1027 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) 1028 goto out; 1029 /* signature to know if this mf is freed */ 1030 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); 1031 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ); 1032 #ifdef MFCNT 1033 ioc->mfcnt--; 1034 #endif 1035 out: 1036 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1037 } 1038 1039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1040 /** 1041 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr. 1042 * @pAddr: virtual address for SGE 1043 * @flagslength: SGE flags and data transfer length 1044 * @dma_addr: Physical address 1045 * 1046 * This routine places a MPT request frame back on the MPT adapter's 1047 * FreeQ. 1048 */ 1049 static void 1050 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1051 { 1052 SGESimple32_t *pSge = (SGESimple32_t *) pAddr; 1053 pSge->FlagsLength = cpu_to_le32(flagslength); 1054 pSge->Address = cpu_to_le32(dma_addr); 1055 } 1056 1057 /** 1058 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. 1059 * @pAddr: virtual address for SGE 1060 * @flagslength: SGE flags and data transfer length 1061 * @dma_addr: Physical address 1062 * 1063 * This routine places a MPT request frame back on the MPT adapter's 1064 * FreeQ. 1065 **/ 1066 static void 1067 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1068 { 1069 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1070 pSge->Address.Low = cpu_to_le32 1071 (lower_32_bits(dma_addr)); 1072 pSge->Address.High = cpu_to_le32 1073 (upper_32_bits(dma_addr)); 1074 pSge->FlagsLength = cpu_to_le32 1075 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1076 } 1077 1078 /** 1079 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). 1080 * @pAddr: virtual address for SGE 1081 * @flagslength: SGE flags and data transfer length 1082 * @dma_addr: Physical address 1083 * 1084 * This routine places a MPT request frame back on the MPT adapter's 1085 * FreeQ. 1086 **/ 1087 static void 1088 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1089 { 1090 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1091 u32 tmp; 1092 1093 pSge->Address.Low = cpu_to_le32 1094 (lower_32_bits(dma_addr)); 1095 tmp = (u32)(upper_32_bits(dma_addr)); 1096 1097 /* 1098 * 1078 errata workaround for the 36GB limitation 1099 */ 1100 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { 1101 flagslength |= 1102 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); 1103 tmp |= (1<<31); 1104 if (mpt_debug_level & MPT_DEBUG_36GB_MEM) 1105 printk(KERN_DEBUG "1078 P0M2 addressing for " 1106 "addr = 0x%llx len = %d\n", 1107 (unsigned long long)dma_addr, 1108 MPI_SGE_LENGTH(flagslength)); 1109 } 1110 1111 pSge->Address.High = cpu_to_le32(tmp); 1112 pSge->FlagsLength = cpu_to_le32( 1113 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1114 } 1115 1116 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1117 /** 1118 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr. 1119 * @pAddr: virtual address for SGE 1120 * @next: nextChainOffset value (u32's) 1121 * @length: length of next SGL segment 1122 * @dma_addr: Physical address 1123 * 1124 */ 1125 static void 1126 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1127 { 1128 SGEChain32_t *pChain = (SGEChain32_t *) pAddr; 1129 1130 pChain->Length = cpu_to_le16(length); 1131 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; 1132 pChain->NextChainOffset = next; 1133 pChain->Address = cpu_to_le32(dma_addr); 1134 } 1135 1136 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1137 /** 1138 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. 1139 * @pAddr: virtual address for SGE 1140 * @next: nextChainOffset value (u32's) 1141 * @length: length of next SGL segment 1142 * @dma_addr: Physical address 1143 * 1144 */ 1145 static void 1146 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1147 { 1148 SGEChain64_t *pChain = (SGEChain64_t *) pAddr; 1149 u32 tmp = dma_addr & 0xFFFFFFFF; 1150 1151 pChain->Length = cpu_to_le16(length); 1152 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | 1153 MPI_SGE_FLAGS_64_BIT_ADDRESSING); 1154 1155 pChain->NextChainOffset = next; 1156 1157 pChain->Address.Low = cpu_to_le32(tmp); 1158 tmp = (u32)(upper_32_bits(dma_addr)); 1159 pChain->Address.High = cpu_to_le32(tmp); 1160 } 1161 1162 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1163 /** 1164 * mpt_send_handshake_request - Send MPT request via doorbell handshake method. 1165 * @cb_idx: Handle of registered MPT protocol driver 1166 * @ioc: Pointer to MPT adapter structure 1167 * @reqBytes: Size of the request in bytes 1168 * @req: Pointer to MPT request frame 1169 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 1170 * 1171 * This routine is used exclusively to send MptScsiTaskMgmt 1172 * requests since they are required to be sent via doorbell handshake. 1173 * 1174 * NOTE: It is the callers responsibility to byte-swap fields in the 1175 * request which are greater than 1 byte in size. 1176 * 1177 * Returns 0 for success, non-zero for failure. 1178 */ 1179 int 1180 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) 1181 { 1182 int r = 0; 1183 u8 *req_as_bytes; 1184 int ii; 1185 1186 /* State is known to be good upon entering 1187 * this function so issue the bus reset 1188 * request. 1189 */ 1190 1191 /* 1192 * Emulate what mpt_put_msg_frame() does /wrt to sanity 1193 * setting cb_idx/req_idx. But ONLY if this request 1194 * is in proper (pre-alloc'd) request buffer range... 1195 */ 1196 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); 1197 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { 1198 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; 1199 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); 1200 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1201 } 1202 1203 /* Make sure there are no doorbells */ 1204 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1205 1206 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1207 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 1208 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 1209 1210 /* Wait for IOC doorbell int */ 1211 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { 1212 return ii; 1213 } 1214 1215 /* Read doorbell and check for active bit */ 1216 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 1217 return -5; 1218 1219 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", 1220 ioc->name, ii)); 1221 1222 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1223 1224 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1225 return -2; 1226 } 1227 1228 /* Send request via doorbell handshake */ 1229 req_as_bytes = (u8 *) req; 1230 for (ii = 0; ii < reqBytes/4; ii++) { 1231 u32 word; 1232 1233 word = ((req_as_bytes[(ii*4) + 0] << 0) | 1234 (req_as_bytes[(ii*4) + 1] << 8) | 1235 (req_as_bytes[(ii*4) + 2] << 16) | 1236 (req_as_bytes[(ii*4) + 3] << 24)); 1237 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1239 r = -3; 1240 break; 1241 } 1242 } 1243 1244 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) 1245 r = 0; 1246 else 1247 r = -4; 1248 1249 /* Make sure there are no doorbells */ 1250 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1251 1252 return r; 1253 } 1254 1255 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1256 /** 1257 * mpt_host_page_access_control - control the IOC's Host Page Buffer access 1258 * @ioc: Pointer to MPT adapter structure 1259 * @access_control_value: define bits below 1260 * @sleepFlag: Specifies whether the process can sleep 1261 * 1262 * Provides mechanism for the host driver to control the IOC's 1263 * Host Page Buffer access. 1264 * 1265 * Access Control Value - bits[15:12] 1266 * 0h Reserved 1267 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } 1268 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } 1269 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } 1270 * 1271 * Returns 0 for success, non-zero for failure. 1272 */ 1273 1274 static int 1275 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) 1276 { 1277 /* return if in use */ 1278 if (CHIPREG_READ32(&ioc->chip->Doorbell) 1279 & MPI_DOORBELL_ACTIVE) 1280 return -1; 1281 1282 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1283 1284 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1285 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL 1286 <<MPI_DOORBELL_FUNCTION_SHIFT) | 1287 (access_control_value<<12))); 1288 1289 /* Wait for IOC to clear Doorbell Status bit */ 1290 if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0) 1291 return -2; 1292 else 1293 return 0; 1294 } 1295 1296 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1297 /** 1298 * mpt_host_page_alloc - allocate system memory for the fw 1299 * @ioc: Pointer to pointer to IOC adapter 1300 * @ioc_init: Pointer to ioc init config page 1301 * 1302 * If we already allocated memory in past, then resend the same pointer. 1303 * Returns 0 for success, non-zero for failure. 1304 */ 1305 static int 1306 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) 1307 { 1308 char *psge; 1309 int flags_length; 1310 u32 host_page_buffer_sz=0; 1311 1312 if(!ioc->HostPageBuffer) { 1313 1314 host_page_buffer_sz = 1315 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; 1316 1317 if(!host_page_buffer_sz) 1318 return 0; /* fw doesn't need any host buffers */ 1319 1320 /* spin till we get enough memory */ 1321 while (host_page_buffer_sz > 0) { 1322 ioc->HostPageBuffer = 1323 dma_alloc_coherent(&ioc->pcidev->dev, 1324 host_page_buffer_sz, 1325 &ioc->HostPageBuffer_dma, 1326 GFP_KERNEL); 1327 if (ioc->HostPageBuffer) { 1328 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1329 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", 1330 ioc->name, ioc->HostPageBuffer, 1331 (u32)ioc->HostPageBuffer_dma, 1332 host_page_buffer_sz)); 1333 ioc->alloc_total += host_page_buffer_sz; 1334 ioc->HostPageBuffer_sz = host_page_buffer_sz; 1335 break; 1336 } 1337 1338 host_page_buffer_sz -= (4*1024); 1339 } 1340 } 1341 1342 if(!ioc->HostPageBuffer) { 1343 printk(MYIOC_s_ERR_FMT 1344 "Failed to alloc memory for host_page_buffer!\n", 1345 ioc->name); 1346 return -999; 1347 } 1348 1349 psge = (char *)&ioc_init->HostPageBufferSGE; 1350 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 1351 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 1352 MPI_SGE_FLAGS_HOST_TO_IOC | 1353 MPI_SGE_FLAGS_END_OF_BUFFER; 1354 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; 1355 flags_length |= ioc->HostPageBuffer_sz; 1356 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); 1357 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; 1358 1359 return 0; 1360 } 1361 1362 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1363 /** 1364 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. 1365 * @iocid: IOC unique identifier (integer) 1366 * @iocpp: Pointer to pointer to IOC adapter 1367 * 1368 * Given a unique IOC identifier, set pointer to the associated MPT 1369 * adapter structure. 1370 * 1371 * Returns iocid and sets iocpp if iocid is found. 1372 * Returns -1 if iocid is not found. 1373 */ 1374 int 1375 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) 1376 { 1377 MPT_ADAPTER *ioc; 1378 1379 list_for_each_entry(ioc,&ioc_list,list) { 1380 if (ioc->id == iocid) { 1381 *iocpp =ioc; 1382 return iocid; 1383 } 1384 } 1385 1386 *iocpp = NULL; 1387 return -1; 1388 } 1389 1390 /** 1391 * mpt_get_product_name - returns product string 1392 * @vendor: pci vendor id 1393 * @device: pci device id 1394 * @revision: pci revision id 1395 * 1396 * Returns product string displayed when driver loads, 1397 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product 1398 * 1399 **/ 1400 static const char* 1401 mpt_get_product_name(u16 vendor, u16 device, u8 revision) 1402 { 1403 char *product_str = NULL; 1404 1405 if (vendor == PCI_VENDOR_ID_BROCADE) { 1406 switch (device) 1407 { 1408 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1409 switch (revision) 1410 { 1411 case 0x00: 1412 product_str = "BRE040 A0"; 1413 break; 1414 case 0x01: 1415 product_str = "BRE040 A1"; 1416 break; 1417 default: 1418 product_str = "BRE040"; 1419 break; 1420 } 1421 break; 1422 } 1423 goto out; 1424 } 1425 1426 switch (device) 1427 { 1428 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1429 product_str = "LSIFC909 B1"; 1430 break; 1431 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1432 product_str = "LSIFC919 B0"; 1433 break; 1434 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1435 product_str = "LSIFC929 B0"; 1436 break; 1437 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1438 if (revision < 0x80) 1439 product_str = "LSIFC919X A0"; 1440 else 1441 product_str = "LSIFC919XL A1"; 1442 break; 1443 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1444 if (revision < 0x80) 1445 product_str = "LSIFC929X A0"; 1446 else 1447 product_str = "LSIFC929XL A1"; 1448 break; 1449 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1450 product_str = "LSIFC939X A1"; 1451 break; 1452 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1453 product_str = "LSIFC949X A1"; 1454 break; 1455 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1456 switch (revision) 1457 { 1458 case 0x00: 1459 product_str = "LSIFC949E A0"; 1460 break; 1461 case 0x01: 1462 product_str = "LSIFC949E A1"; 1463 break; 1464 default: 1465 product_str = "LSIFC949E"; 1466 break; 1467 } 1468 break; 1469 case MPI_MANUFACTPAGE_DEVID_53C1030: 1470 switch (revision) 1471 { 1472 case 0x00: 1473 product_str = "LSI53C1030 A0"; 1474 break; 1475 case 0x01: 1476 product_str = "LSI53C1030 B0"; 1477 break; 1478 case 0x03: 1479 product_str = "LSI53C1030 B1"; 1480 break; 1481 case 0x07: 1482 product_str = "LSI53C1030 B2"; 1483 break; 1484 case 0x08: 1485 product_str = "LSI53C1030 C0"; 1486 break; 1487 case 0x80: 1488 product_str = "LSI53C1030T A0"; 1489 break; 1490 case 0x83: 1491 product_str = "LSI53C1030T A2"; 1492 break; 1493 case 0x87: 1494 product_str = "LSI53C1030T A3"; 1495 break; 1496 case 0xc1: 1497 product_str = "LSI53C1020A A1"; 1498 break; 1499 default: 1500 product_str = "LSI53C1030"; 1501 break; 1502 } 1503 break; 1504 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1505 switch (revision) 1506 { 1507 case 0x03: 1508 product_str = "LSI53C1035 A2"; 1509 break; 1510 case 0x04: 1511 product_str = "LSI53C1035 B0"; 1512 break; 1513 default: 1514 product_str = "LSI53C1035"; 1515 break; 1516 } 1517 break; 1518 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1519 switch (revision) 1520 { 1521 case 0x00: 1522 product_str = "LSISAS1064 A1"; 1523 break; 1524 case 0x01: 1525 product_str = "LSISAS1064 A2"; 1526 break; 1527 case 0x02: 1528 product_str = "LSISAS1064 A3"; 1529 break; 1530 case 0x03: 1531 product_str = "LSISAS1064 A4"; 1532 break; 1533 default: 1534 product_str = "LSISAS1064"; 1535 break; 1536 } 1537 break; 1538 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1539 switch (revision) 1540 { 1541 case 0x00: 1542 product_str = "LSISAS1064E A0"; 1543 break; 1544 case 0x01: 1545 product_str = "LSISAS1064E B0"; 1546 break; 1547 case 0x02: 1548 product_str = "LSISAS1064E B1"; 1549 break; 1550 case 0x04: 1551 product_str = "LSISAS1064E B2"; 1552 break; 1553 case 0x08: 1554 product_str = "LSISAS1064E B3"; 1555 break; 1556 default: 1557 product_str = "LSISAS1064E"; 1558 break; 1559 } 1560 break; 1561 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1562 switch (revision) 1563 { 1564 case 0x00: 1565 product_str = "LSISAS1068 A0"; 1566 break; 1567 case 0x01: 1568 product_str = "LSISAS1068 B0"; 1569 break; 1570 case 0x02: 1571 product_str = "LSISAS1068 B1"; 1572 break; 1573 default: 1574 product_str = "LSISAS1068"; 1575 break; 1576 } 1577 break; 1578 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1579 switch (revision) 1580 { 1581 case 0x00: 1582 product_str = "LSISAS1068E A0"; 1583 break; 1584 case 0x01: 1585 product_str = "LSISAS1068E B0"; 1586 break; 1587 case 0x02: 1588 product_str = "LSISAS1068E B1"; 1589 break; 1590 case 0x04: 1591 product_str = "LSISAS1068E B2"; 1592 break; 1593 case 0x08: 1594 product_str = "LSISAS1068E B3"; 1595 break; 1596 default: 1597 product_str = "LSISAS1068E"; 1598 break; 1599 } 1600 break; 1601 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1602 switch (revision) 1603 { 1604 case 0x00: 1605 product_str = "LSISAS1078 A0"; 1606 break; 1607 case 0x01: 1608 product_str = "LSISAS1078 B0"; 1609 break; 1610 case 0x02: 1611 product_str = "LSISAS1078 C0"; 1612 break; 1613 case 0x03: 1614 product_str = "LSISAS1078 C1"; 1615 break; 1616 case 0x04: 1617 product_str = "LSISAS1078 C2"; 1618 break; 1619 default: 1620 product_str = "LSISAS1078"; 1621 break; 1622 } 1623 break; 1624 } 1625 1626 out: 1627 return product_str; 1628 } 1629 1630 /** 1631 * mpt_mapresources - map in memory mapped io 1632 * @ioc: Pointer to pointer to IOC adapter 1633 * 1634 **/ 1635 static int 1636 mpt_mapresources(MPT_ADAPTER *ioc) 1637 { 1638 u8 __iomem *mem; 1639 int ii; 1640 resource_size_t mem_phys; 1641 unsigned long port; 1642 u32 msize; 1643 u32 psize; 1644 int r = -ENODEV; 1645 struct pci_dev *pdev; 1646 1647 pdev = ioc->pcidev; 1648 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); 1649 if (pci_enable_device_mem(pdev)) { 1650 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " 1651 "failed\n", ioc->name); 1652 return r; 1653 } 1654 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { 1655 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " 1656 "MEM failed\n", ioc->name); 1657 goto out_pci_disable_device; 1658 } 1659 1660 if (sizeof(dma_addr_t) > 4) { 1661 const uint64_t required_mask = dma_get_required_mask 1662 (&pdev->dev); 1663 if (required_mask > DMA_BIT_MASK(32) 1664 && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) 1665 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { 1666 ioc->dma_mask = DMA_BIT_MASK(64); 1667 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1668 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1669 ioc->name)); 1670 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) 1671 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { 1672 ioc->dma_mask = DMA_BIT_MASK(32); 1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1674 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1675 ioc->name)); 1676 } else { 1677 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1678 ioc->name, pci_name(pdev)); 1679 goto out_pci_release_region; 1680 } 1681 } else { 1682 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) 1683 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { 1684 ioc->dma_mask = DMA_BIT_MASK(32); 1685 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1686 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1687 ioc->name)); 1688 } else { 1689 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1690 ioc->name, pci_name(pdev)); 1691 goto out_pci_release_region; 1692 } 1693 } 1694 1695 mem_phys = msize = 0; 1696 port = psize = 0; 1697 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { 1698 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { 1699 if (psize) 1700 continue; 1701 /* Get I/O space! */ 1702 port = pci_resource_start(pdev, ii); 1703 psize = pci_resource_len(pdev, ii); 1704 } else { 1705 if (msize) 1706 continue; 1707 /* Get memmap */ 1708 mem_phys = pci_resource_start(pdev, ii); 1709 msize = pci_resource_len(pdev, ii); 1710 } 1711 } 1712 ioc->mem_size = msize; 1713 1714 mem = NULL; 1715 /* Get logical ptr for PciMem0 space */ 1716 /*mem = ioremap(mem_phys, msize);*/ 1717 mem = ioremap(mem_phys, msize); 1718 if (mem == NULL) { 1719 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" 1720 " memory!\n", ioc->name); 1721 r = -EINVAL; 1722 goto out_pci_release_region; 1723 } 1724 ioc->memmap = mem; 1725 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", 1726 ioc->name, mem, (unsigned long long)mem_phys)); 1727 1728 ioc->mem_phys = mem_phys; 1729 ioc->chip = (SYSIF_REGS __iomem *)mem; 1730 1731 /* Save Port IO values in case we need to do downloadboot */ 1732 ioc->pio_mem_phys = port; 1733 ioc->pio_chip = (SYSIF_REGS __iomem *)port; 1734 1735 return 0; 1736 1737 out_pci_release_region: 1738 pci_release_selected_regions(pdev, ioc->bars); 1739 out_pci_disable_device: 1740 pci_disable_device(pdev); 1741 return r; 1742 } 1743 1744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1745 /** 1746 * mpt_attach - Install a PCI intelligent MPT adapter. 1747 * @pdev: Pointer to pci_dev structure 1748 * @id: PCI device ID information 1749 * 1750 * This routine performs all the steps necessary to bring the IOC of 1751 * a MPT adapter to a OPERATIONAL state. This includes registering 1752 * memory regions, registering the interrupt, and allocating request 1753 * and reply memory pools. 1754 * 1755 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 1756 * MPT adapter. 1757 * 1758 * Returns 0 for success, non-zero for failure. 1759 * 1760 * TODO: Add support for polled controllers 1761 */ 1762 int 1763 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) 1764 { 1765 MPT_ADAPTER *ioc; 1766 u8 cb_idx; 1767 int r = -ENODEV; 1768 u8 pcixcmd; 1769 static int mpt_ids = 0; 1770 #ifdef CONFIG_PROC_FS 1771 struct proc_dir_entry *dent; 1772 #endif 1773 1774 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL); 1775 if (ioc == NULL) { 1776 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); 1777 return -ENOMEM; 1778 } 1779 1780 ioc->id = mpt_ids++; 1781 sprintf(ioc->name, "ioc%d", ioc->id); 1782 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); 1783 1784 /* 1785 * set initial debug level 1786 * (refer to mptdebug.h) 1787 * 1788 */ 1789 ioc->debug_level = mpt_debug_level; 1790 if (mpt_debug_level) 1791 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); 1792 1793 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); 1794 1795 ioc->pcidev = pdev; 1796 if (mpt_mapresources(ioc)) { 1797 goto out_free_ioc; 1798 } 1799 1800 /* 1801 * Setting up proper handlers for scatter gather handling 1802 */ 1803 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 1804 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 1805 ioc->add_sge = &mpt_add_sge_64bit_1078; 1806 else 1807 ioc->add_sge = &mpt_add_sge_64bit; 1808 ioc->add_chain = &mpt_add_chain_64bit; 1809 ioc->sg_addr_size = 8; 1810 } else { 1811 ioc->add_sge = &mpt_add_sge; 1812 ioc->add_chain = &mpt_add_chain; 1813 ioc->sg_addr_size = 4; 1814 } 1815 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 1816 1817 ioc->alloc_total = sizeof(MPT_ADAPTER); 1818 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ 1819 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 1820 1821 1822 spin_lock_init(&ioc->taskmgmt_lock); 1823 mutex_init(&ioc->internal_cmds.mutex); 1824 init_completion(&ioc->internal_cmds.done); 1825 mutex_init(&ioc->mptbase_cmds.mutex); 1826 init_completion(&ioc->mptbase_cmds.done); 1827 mutex_init(&ioc->taskmgmt_cmds.mutex); 1828 init_completion(&ioc->taskmgmt_cmds.done); 1829 1830 /* Initialize the event logging. 1831 */ 1832 ioc->eventTypes = 0; /* None */ 1833 ioc->eventContext = 0; 1834 ioc->eventLogSize = 0; 1835 ioc->events = NULL; 1836 1837 #ifdef MFCNT 1838 ioc->mfcnt = 0; 1839 #endif 1840 1841 ioc->sh = NULL; 1842 ioc->cached_fw = NULL; 1843 1844 /* Initialize SCSI Config Data structure 1845 */ 1846 memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); 1847 1848 /* Initialize the fc rport list head. 1849 */ 1850 INIT_LIST_HEAD(&ioc->fc_rports); 1851 1852 /* Find lookup slot. */ 1853 INIT_LIST_HEAD(&ioc->list); 1854 1855 1856 /* Initialize workqueue */ 1857 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); 1858 1859 ioc->reset_work_q = 1860 alloc_workqueue("mpt_poll_%d", WQ_MEM_RECLAIM | WQ_PERCPU, 0, 1861 ioc->id); 1862 if (!ioc->reset_work_q) { 1863 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1864 ioc->name); 1865 r = -ENOMEM; 1866 goto out_unmap_resources; 1867 } 1868 1869 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", 1870 ioc->name, &ioc->facts, &ioc->pfacts[0])); 1871 1872 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device, 1873 pdev->revision); 1874 1875 switch (pdev->device) 1876 { 1877 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1878 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1879 ioc->errata_flag_1064 = 1; 1880 fallthrough; 1881 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1882 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1883 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1884 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1885 ioc->bus_type = FC; 1886 break; 1887 1888 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1889 if (pdev->revision < XL_929) { 1890 /* 929X Chip Fix. Set Split transactions level 1891 * for PCIX. Set MOST bits to zero. 1892 */ 1893 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1894 pcixcmd &= 0x8F; 1895 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1896 } else { 1897 /* 929XL Chip Fix. Set MMRBC to 0x08. 1898 */ 1899 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1900 pcixcmd |= 0x08; 1901 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1902 } 1903 ioc->bus_type = FC; 1904 break; 1905 1906 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1907 /* 919X Chip Fix. Set Split transactions level 1908 * for PCIX. Set MOST bits to zero. 1909 */ 1910 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1911 pcixcmd &= 0x8F; 1912 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1913 ioc->bus_type = FC; 1914 break; 1915 1916 case MPI_MANUFACTPAGE_DEVID_53C1030: 1917 /* 1030 Chip Fix. Disable Split transactions 1918 * for PCIX. Set MOST bits to zero if Rev < C0( = 8). 1919 */ 1920 if (pdev->revision < C0_1030) { 1921 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1922 pcixcmd &= 0x8F; 1923 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1924 } 1925 fallthrough; 1926 1927 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1928 ioc->bus_type = SPI; 1929 break; 1930 1931 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1932 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1933 ioc->errata_flag_1064 = 1; 1934 ioc->bus_type = SAS; 1935 break; 1936 1937 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1938 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1939 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1940 ioc->bus_type = SAS; 1941 break; 1942 } 1943 1944 1945 switch (ioc->bus_type) { 1946 1947 case SAS: 1948 ioc->msi_enable = mpt_msi_enable_sas; 1949 break; 1950 1951 case SPI: 1952 ioc->msi_enable = mpt_msi_enable_spi; 1953 break; 1954 1955 case FC: 1956 ioc->msi_enable = mpt_msi_enable_fc; 1957 break; 1958 1959 default: 1960 ioc->msi_enable = 0; 1961 break; 1962 } 1963 1964 ioc->fw_events_off = 1; 1965 1966 if (ioc->errata_flag_1064) 1967 pci_disable_io_access(pdev); 1968 1969 spin_lock_init(&ioc->FreeQlock); 1970 1971 /* Disable all! */ 1972 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 1973 ioc->active = 0; 1974 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1975 1976 /* Set IOC ptr in the pcidev's driver data. */ 1977 pci_set_drvdata(ioc->pcidev, ioc); 1978 1979 /* Set lookup ptr. */ 1980 list_add_tail(&ioc->list, &ioc_list); 1981 1982 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. 1983 */ 1984 mpt_detect_bound_ports(ioc, pdev); 1985 1986 INIT_LIST_HEAD(&ioc->fw_event_list); 1987 spin_lock_init(&ioc->fw_event_lock); 1988 ioc->fw_event_q = alloc_workqueue("mpt/%d", 1989 WQ_MEM_RECLAIM | WQ_PERCPU, 0, 1990 ioc->id); 1991 if (!ioc->fw_event_q) { 1992 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1993 ioc->name); 1994 r = -ENOMEM; 1995 goto out_remove_ioc; 1996 } 1997 1998 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 1999 CAN_SLEEP)) != 0){ 2000 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", 2001 ioc->name, r); 2002 2003 destroy_workqueue(ioc->fw_event_q); 2004 ioc->fw_event_q = NULL; 2005 2006 list_del(&ioc->list); 2007 if (ioc->alt_ioc) 2008 ioc->alt_ioc->alt_ioc = NULL; 2009 iounmap(ioc->memmap); 2010 if (pci_is_enabled(pdev)) 2011 pci_disable_device(pdev); 2012 if (r != -5) 2013 pci_release_selected_regions(pdev, ioc->bars); 2014 2015 destroy_workqueue(ioc->reset_work_q); 2016 ioc->reset_work_q = NULL; 2017 2018 kfree(ioc); 2019 return r; 2020 } 2021 2022 /* call per device driver probe entry point */ 2023 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2024 if(MptDeviceDriverHandlers[cb_idx] && 2025 MptDeviceDriverHandlers[cb_idx]->probe) { 2026 MptDeviceDriverHandlers[cb_idx]->probe(pdev); 2027 } 2028 } 2029 2030 #ifdef CONFIG_PROC_FS 2031 /* 2032 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. 2033 */ 2034 dent = proc_mkdir(ioc->name, mpt_proc_root_dir); 2035 if (dent) { 2036 proc_create_single_data("info", S_IRUGO, dent, 2037 mpt_iocinfo_proc_show, ioc); 2038 proc_create_single_data("summary", S_IRUGO, dent, 2039 mpt_summary_proc_show, ioc); 2040 } 2041 #endif 2042 2043 if (!ioc->alt_ioc) 2044 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 2045 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 2046 2047 return 0; 2048 2049 out_remove_ioc: 2050 list_del(&ioc->list); 2051 if (ioc->alt_ioc) 2052 ioc->alt_ioc->alt_ioc = NULL; 2053 2054 destroy_workqueue(ioc->reset_work_q); 2055 ioc->reset_work_q = NULL; 2056 2057 out_unmap_resources: 2058 iounmap(ioc->memmap); 2059 pci_disable_device(pdev); 2060 pci_release_selected_regions(pdev, ioc->bars); 2061 2062 out_free_ioc: 2063 kfree(ioc); 2064 2065 return r; 2066 } 2067 2068 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2069 /** 2070 * mpt_detach - Remove a PCI intelligent MPT adapter. 2071 * @pdev: Pointer to pci_dev structure 2072 */ 2073 2074 void 2075 mpt_detach(struct pci_dev *pdev) 2076 { 2077 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2078 char pname[64]; 2079 u8 cb_idx; 2080 unsigned long flags; 2081 struct workqueue_struct *wq; 2082 2083 /* 2084 * Stop polling ioc for fault condition 2085 */ 2086 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2087 wq = ioc->reset_work_q; 2088 ioc->reset_work_q = NULL; 2089 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2090 cancel_delayed_work(&ioc->fault_reset_work); 2091 destroy_workqueue(wq); 2092 2093 spin_lock_irqsave(&ioc->fw_event_lock, flags); 2094 wq = ioc->fw_event_q; 2095 ioc->fw_event_q = NULL; 2096 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 2097 destroy_workqueue(wq); 2098 2099 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); 2100 remove_proc_entry(pname, NULL); 2101 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); 2102 remove_proc_entry(pname, NULL); 2103 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); 2104 remove_proc_entry(pname, NULL); 2105 2106 /* call per device driver remove entry point */ 2107 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2108 if(MptDeviceDriverHandlers[cb_idx] && 2109 MptDeviceDriverHandlers[cb_idx]->remove) { 2110 MptDeviceDriverHandlers[cb_idx]->remove(pdev); 2111 } 2112 } 2113 2114 /* Disable interrupts! */ 2115 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2116 2117 ioc->active = 0; 2118 synchronize_irq(pdev->irq); 2119 2120 /* Clear any lingering interrupt */ 2121 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2122 2123 CHIPREG_READ32(&ioc->chip->IntStatus); 2124 2125 mpt_adapter_dispose(ioc); 2126 2127 } 2128 2129 /************************************************************************** 2130 * Power Management 2131 */ 2132 #ifdef CONFIG_PM 2133 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2134 /** 2135 * mpt_suspend - Fusion MPT base driver suspend routine. 2136 * @pdev: Pointer to pci_dev structure 2137 * @state: new state to enter 2138 */ 2139 int 2140 mpt_suspend(struct pci_dev *pdev, pm_message_t state) 2141 { 2142 u32 device_state; 2143 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2144 2145 device_state = pci_choose_state(pdev, state); 2146 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " 2147 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2148 device_state); 2149 2150 /* put ioc into READY_STATE */ 2151 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { 2152 printk(MYIOC_s_ERR_FMT 2153 "pci-suspend: IOC msg unit reset failed!\n", ioc->name); 2154 } 2155 2156 /* disable interrupts */ 2157 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2158 ioc->active = 0; 2159 2160 /* Clear any lingering interrupt */ 2161 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2162 2163 free_irq(ioc->pci_irq, ioc); 2164 if (ioc->msi_enable) 2165 pci_disable_msi(ioc->pcidev); 2166 ioc->pci_irq = -1; 2167 pci_save_state(pdev); 2168 pci_disable_device(pdev); 2169 pci_release_selected_regions(pdev, ioc->bars); 2170 pci_set_power_state(pdev, device_state); 2171 return 0; 2172 } 2173 2174 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2175 /** 2176 * mpt_resume - Fusion MPT base driver resume routine. 2177 * @pdev: Pointer to pci_dev structure 2178 */ 2179 int 2180 mpt_resume(struct pci_dev *pdev) 2181 { 2182 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2183 u32 device_state = pdev->current_state; 2184 int recovery_state; 2185 int err; 2186 2187 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " 2188 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2189 device_state); 2190 2191 pci_set_power_state(pdev, PCI_D0); 2192 pci_enable_wake(pdev, PCI_D0, 0); 2193 pci_restore_state(pdev); 2194 ioc->pcidev = pdev; 2195 err = mpt_mapresources(ioc); 2196 if (err) 2197 return err; 2198 2199 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 2200 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 2201 ioc->add_sge = &mpt_add_sge_64bit_1078; 2202 else 2203 ioc->add_sge = &mpt_add_sge_64bit; 2204 ioc->add_chain = &mpt_add_chain_64bit; 2205 ioc->sg_addr_size = 8; 2206 } else { 2207 2208 ioc->add_sge = &mpt_add_sge; 2209 ioc->add_chain = &mpt_add_chain; 2210 ioc->sg_addr_size = 4; 2211 } 2212 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 2213 2214 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", 2215 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), 2216 CHIPREG_READ32(&ioc->chip->Doorbell)); 2217 2218 /* 2219 * Errata workaround for SAS pci express: 2220 * Upon returning to the D0 state, the contents of the doorbell will be 2221 * stale data, and this will incorrectly signal to the host driver that 2222 * the firmware is ready to process mpt commands. The workaround is 2223 * to issue a diagnostic reset. 2224 */ 2225 if (ioc->bus_type == SAS && (pdev->device == 2226 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == 2227 MPI_MANUFACTPAGE_DEVID_SAS1064E)) { 2228 if (KickStart(ioc, 1, CAN_SLEEP) < 0) { 2229 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", 2230 ioc->name); 2231 goto out; 2232 } 2233 } 2234 2235 /* bring ioc to operational state */ 2236 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); 2237 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2238 CAN_SLEEP); 2239 if (recovery_state != 0) 2240 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " 2241 "error:[%x]\n", ioc->name, recovery_state); 2242 else 2243 printk(MYIOC_s_INFO_FMT 2244 "pci-resume: success\n", ioc->name); 2245 out: 2246 return 0; 2247 2248 } 2249 #endif 2250 2251 static int 2252 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) 2253 { 2254 if ((MptDriverClass[index] == MPTSPI_DRIVER && 2255 ioc->bus_type != SPI) || 2256 (MptDriverClass[index] == MPTFC_DRIVER && 2257 ioc->bus_type != FC) || 2258 (MptDriverClass[index] == MPTSAS_DRIVER && 2259 ioc->bus_type != SAS)) 2260 /* make sure we only call the relevant reset handler 2261 * for the bus */ 2262 return 0; 2263 return (MptResetHandlers[index])(ioc, reset_phase); 2264 } 2265 2266 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2267 /** 2268 * mpt_do_ioc_recovery - Initialize or recover MPT adapter. 2269 * @ioc: Pointer to MPT adapter structure 2270 * @reason: Event word / reason 2271 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 2272 * 2273 * This routine performs all the steps necessary to bring the IOC 2274 * to a OPERATIONAL state. 2275 * 2276 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 2277 * MPT adapter. 2278 * 2279 * Returns: 2280 * 0 for success 2281 * -1 if failed to get board READY 2282 * -2 if READY but IOCFacts Failed 2283 * -3 if READY but PrimeIOCFifos Failed 2284 * -4 if READY but IOCInit Failed 2285 * -5 if failed to enable_device and/or request_selected_regions 2286 * -6 if failed to upload firmware 2287 */ 2288 static int 2289 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) 2290 { 2291 int hard_reset_done = 0; 2292 int alt_ioc_ready = 0; 2293 int hard; 2294 int rc=0; 2295 int ii; 2296 int ret = 0; 2297 int reset_alt_ioc_active = 0; 2298 int irq_allocated = 0; 2299 u8 *a; 2300 2301 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, 2302 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); 2303 2304 /* Disable reply interrupts (also blocks FreeQ) */ 2305 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2306 ioc->active = 0; 2307 2308 if (ioc->alt_ioc) { 2309 if (ioc->alt_ioc->active || 2310 reason == MPT_HOSTEVENT_IOC_RECOVER) { 2311 reset_alt_ioc_active = 1; 2312 /* Disable alt-IOC's reply interrupts 2313 * (and FreeQ) for a bit 2314 **/ 2315 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2316 0xFFFFFFFF); 2317 ioc->alt_ioc->active = 0; 2318 } 2319 } 2320 2321 hard = 1; 2322 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) 2323 hard = 0; 2324 2325 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { 2326 if (hard_reset_done == -4) { 2327 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", 2328 ioc->name); 2329 2330 if (reset_alt_ioc_active && ioc->alt_ioc) { 2331 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ 2332 dprintk(ioc, printk(MYIOC_s_INFO_FMT 2333 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); 2334 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); 2335 ioc->alt_ioc->active = 1; 2336 } 2337 2338 } else { 2339 printk(MYIOC_s_WARN_FMT 2340 "NOT READY WARNING!\n", ioc->name); 2341 } 2342 ret = -1; 2343 goto out; 2344 } 2345 2346 /* hard_reset_done = 0 if a soft reset was performed 2347 * and 1 if a hard reset was performed. 2348 */ 2349 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { 2350 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) 2351 alt_ioc_ready = 1; 2352 else 2353 printk(MYIOC_s_WARN_FMT 2354 ": alt-ioc Not ready WARNING!\n", 2355 ioc->alt_ioc->name); 2356 } 2357 2358 for (ii=0; ii<5; ii++) { 2359 /* Get IOC facts! Allow 5 retries */ 2360 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) 2361 break; 2362 } 2363 2364 2365 if (ii == 5) { 2366 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2367 "Retry IocFacts failed rc=%x\n", ioc->name, rc)); 2368 ret = -2; 2369 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2370 MptDisplayIocCapabilities(ioc); 2371 } 2372 2373 if (alt_ioc_ready) { 2374 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { 2375 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2376 "Initial Alt IocFacts failed rc=%x\n", 2377 ioc->name, rc)); 2378 /* Retry - alt IOC was initialized once 2379 */ 2380 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); 2381 } 2382 if (rc) { 2383 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2384 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); 2385 alt_ioc_ready = 0; 2386 reset_alt_ioc_active = 0; 2387 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2388 MptDisplayIocCapabilities(ioc->alt_ioc); 2389 } 2390 } 2391 2392 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && 2393 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { 2394 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2395 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | 2396 IORESOURCE_IO); 2397 if (pci_enable_device(ioc->pcidev)) 2398 return -5; 2399 if (pci_request_selected_regions(ioc->pcidev, ioc->bars, 2400 "mpt")) 2401 return -5; 2402 } 2403 2404 /* 2405 * Device is reset now. It must have de-asserted the interrupt line 2406 * (if it was asserted) and it should be safe to register for the 2407 * interrupt now. 2408 */ 2409 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2410 ioc->pci_irq = -1; 2411 if (ioc->pcidev->irq) { 2412 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) 2413 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", 2414 ioc->name); 2415 else 2416 ioc->msi_enable = 0; 2417 rc = request_irq(ioc->pcidev->irq, mpt_interrupt, 2418 IRQF_SHARED, ioc->name, ioc); 2419 if (rc < 0) { 2420 printk(MYIOC_s_ERR_FMT "Unable to allocate " 2421 "interrupt %d!\n", 2422 ioc->name, ioc->pcidev->irq); 2423 if (ioc->msi_enable) 2424 pci_disable_msi(ioc->pcidev); 2425 ret = -EBUSY; 2426 goto out; 2427 } 2428 irq_allocated = 1; 2429 ioc->pci_irq = ioc->pcidev->irq; 2430 pci_set_master(ioc->pcidev); /* ?? */ 2431 pci_set_drvdata(ioc->pcidev, ioc); 2432 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2433 "installed at interrupt %d\n", ioc->name, 2434 ioc->pcidev->irq)); 2435 } 2436 } 2437 2438 /* Prime reply & request queues! 2439 * (mucho alloc's) Must be done prior to 2440 * init as upper addresses are needed for init. 2441 * If fails, continue with alt-ioc processing 2442 */ 2443 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", 2444 ioc->name)); 2445 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) 2446 ret = -3; 2447 2448 /* May need to check/upload firmware & data here! 2449 * If fails, continue with alt-ioc processing 2450 */ 2451 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", 2452 ioc->name)); 2453 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) 2454 ret = -4; 2455 // NEW! 2456 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { 2457 printk(MYIOC_s_WARN_FMT 2458 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", 2459 ioc->alt_ioc->name, rc); 2460 alt_ioc_ready = 0; 2461 reset_alt_ioc_active = 0; 2462 } 2463 2464 if (alt_ioc_ready) { 2465 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { 2466 alt_ioc_ready = 0; 2467 reset_alt_ioc_active = 0; 2468 printk(MYIOC_s_WARN_FMT 2469 ": alt-ioc: (%d) init failure WARNING!\n", 2470 ioc->alt_ioc->name, rc); 2471 } 2472 } 2473 2474 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ 2475 if (ioc->upload_fw) { 2476 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2477 "firmware upload required!\n", ioc->name)); 2478 2479 /* Controller is not operational, cannot do upload 2480 */ 2481 if (ret == 0) { 2482 rc = mpt_do_upload(ioc, sleepFlag); 2483 if (rc == 0) { 2484 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 2485 /* 2486 * Maintain only one pointer to FW memory 2487 * so there will not be two attempt to 2488 * downloadboot onboard dual function 2489 * chips (mpt_adapter_disable, 2490 * mpt_diag_reset) 2491 */ 2492 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2493 "mpt_upload: alt_%s has cached_fw=%p \n", 2494 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); 2495 ioc->cached_fw = NULL; 2496 } 2497 } else { 2498 printk(MYIOC_s_WARN_FMT 2499 "firmware upload failure!\n", ioc->name); 2500 ret = -6; 2501 } 2502 } 2503 } 2504 } 2505 2506 /* Enable MPT base driver management of EventNotification 2507 * and EventAck handling. 2508 */ 2509 if ((ret == 0) && (!ioc->facts.EventState)) { 2510 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2511 "SendEventNotification\n", 2512 ioc->name)); 2513 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ 2514 } 2515 2516 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) 2517 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); 2518 2519 if (ret == 0) { 2520 /* Enable! (reply interrupt) */ 2521 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 2522 ioc->active = 1; 2523 } 2524 if (rc == 0) { /* alt ioc */ 2525 if (reset_alt_ioc_active && ioc->alt_ioc) { 2526 /* (re)Enable alt-IOC! (reply interrupt) */ 2527 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" 2528 "reply irq re-enabled\n", 2529 ioc->alt_ioc->name)); 2530 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2531 MPI_HIM_DIM); 2532 ioc->alt_ioc->active = 1; 2533 } 2534 } 2535 2536 2537 /* Add additional "reason" check before call to GetLanConfigPages 2538 * (combined with GetIoUnitPage2 call). This prevents a somewhat 2539 * recursive scenario; GetLanConfigPages times out, timer expired 2540 * routine calls HardResetHandler, which calls into here again, 2541 * and we try GetLanConfigPages again... 2542 */ 2543 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2544 2545 /* 2546 * Initialize link list for inactive raid volumes. 2547 */ 2548 mutex_init(&ioc->raid_data.inactive_list_mutex); 2549 INIT_LIST_HEAD(&ioc->raid_data.inactive_list); 2550 2551 switch (ioc->bus_type) { 2552 2553 case SAS: 2554 /* clear persistency table */ 2555 if(ioc->facts.IOCExceptions & 2556 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { 2557 ret = mptbase_sas_persist_operation(ioc, 2558 MPI_SAS_OP_CLEAR_NOT_PRESENT); 2559 if(ret != 0) 2560 goto out; 2561 } 2562 2563 /* Find IM volumes 2564 */ 2565 mpt_findImVolumes(ioc); 2566 2567 /* Check, and possibly reset, the coalescing value 2568 */ 2569 mpt_read_ioc_pg_1(ioc); 2570 2571 break; 2572 2573 case FC: 2574 if ((ioc->pfacts[0].ProtocolFlags & 2575 MPI_PORTFACTS_PROTOCOL_LAN) && 2576 (ioc->lan_cnfg_page0.Header.PageLength == 0)) { 2577 /* 2578 * Pre-fetch the ports LAN MAC address! 2579 * (LANPage1_t stuff) 2580 */ 2581 (void) GetLanConfigPages(ioc); 2582 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 2583 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2584 "LanAddr = %pMR\n", ioc->name, a)); 2585 } 2586 break; 2587 2588 case SPI: 2589 /* Get NVRAM and adapter maximums from SPP 0 and 2 2590 */ 2591 mpt_GetScsiPortSettings(ioc, 0); 2592 2593 /* Get version and length of SDP 1 2594 */ 2595 mpt_readScsiDevicePageHeaders(ioc, 0); 2596 2597 /* Find IM volumes 2598 */ 2599 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) 2600 mpt_findImVolumes(ioc); 2601 2602 /* Check, and possibly reset, the coalescing value 2603 */ 2604 mpt_read_ioc_pg_1(ioc); 2605 2606 mpt_read_ioc_pg_4(ioc); 2607 2608 break; 2609 } 2610 2611 GetIoUnitPage2(ioc); 2612 mpt_get_manufacturing_pg_0(ioc); 2613 } 2614 2615 out: 2616 if ((ret != 0) && irq_allocated) { 2617 free_irq(ioc->pci_irq, ioc); 2618 if (ioc->msi_enable) 2619 pci_disable_msi(ioc->pcidev); 2620 } 2621 return ret; 2622 } 2623 2624 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2625 /** 2626 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function 2627 * @ioc: Pointer to MPT adapter structure 2628 * @pdev: Pointer to (struct pci_dev) structure 2629 * 2630 * Search for PCI bus/dev_function which matches 2631 * PCI bus/dev_function (+/-1) for newly discovered 929, 2632 * 929X, 1030 or 1035. 2633 * 2634 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters 2635 * using alt_ioc pointer fields in their %MPT_ADAPTER structures. 2636 */ 2637 static void 2638 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) 2639 { 2640 struct pci_dev *peer=NULL; 2641 unsigned int slot = PCI_SLOT(pdev->devfn); 2642 unsigned int func = PCI_FUNC(pdev->devfn); 2643 MPT_ADAPTER *ioc_srch; 2644 2645 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," 2646 " searching for devfn match on %x or %x\n", 2647 ioc->name, pci_name(pdev), pdev->bus->number, 2648 pdev->devfn, func-1, func+1)); 2649 2650 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); 2651 if (!peer) { 2652 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); 2653 if (!peer) 2654 return; 2655 } 2656 2657 list_for_each_entry(ioc_srch, &ioc_list, list) { 2658 struct pci_dev *_pcidev = ioc_srch->pcidev; 2659 if (_pcidev == peer) { 2660 /* Paranoia checks */ 2661 if (ioc->alt_ioc != NULL) { 2662 printk(MYIOC_s_WARN_FMT 2663 "Oops, already bound (%s <==> %s)!\n", 2664 ioc->name, ioc->name, ioc->alt_ioc->name); 2665 break; 2666 } else if (ioc_srch->alt_ioc != NULL) { 2667 printk(MYIOC_s_WARN_FMT 2668 "Oops, already bound (%s <==> %s)!\n", 2669 ioc_srch->name, ioc_srch->name, 2670 ioc_srch->alt_ioc->name); 2671 break; 2672 } 2673 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2674 "FOUND! binding %s <==> %s\n", 2675 ioc->name, ioc->name, ioc_srch->name)); 2676 ioc_srch->alt_ioc = ioc; 2677 ioc->alt_ioc = ioc_srch; 2678 } 2679 } 2680 pci_dev_put(peer); 2681 } 2682 2683 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2684 /** 2685 * mpt_adapter_disable - Disable misbehaving MPT adapter. 2686 * @ioc: Pointer to MPT adapter structure 2687 */ 2688 static void 2689 mpt_adapter_disable(MPT_ADAPTER *ioc) 2690 { 2691 int sz; 2692 int ret; 2693 2694 if (ioc->cached_fw != NULL) { 2695 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2696 "%s: Pushing FW onto adapter\n", __func__, ioc->name)); 2697 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) 2698 ioc->cached_fw, CAN_SLEEP)) < 0) { 2699 printk(MYIOC_s_WARN_FMT 2700 ": firmware downloadboot failure (%d)!\n", 2701 ioc->name, ret); 2702 } 2703 } 2704 2705 /* 2706 * Put the controller into ready state (if its not already) 2707 */ 2708 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { 2709 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, 2710 CAN_SLEEP)) { 2711 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) 2712 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " 2713 "reset failed to put ioc in ready state!\n", 2714 ioc->name, __func__); 2715 } else 2716 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " 2717 "failed!\n", ioc->name, __func__); 2718 } 2719 2720 2721 /* Disable adapter interrupts! */ 2722 synchronize_irq(ioc->pcidev->irq); 2723 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2724 ioc->active = 0; 2725 2726 /* Clear any lingering interrupt */ 2727 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2728 CHIPREG_READ32(&ioc->chip->IntStatus); 2729 2730 if (ioc->alloc != NULL) { 2731 sz = ioc->alloc_sz; 2732 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", 2733 ioc->name, ioc->alloc, ioc->alloc_sz)); 2734 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, 2735 ioc->alloc_dma); 2736 ioc->reply_frames = NULL; 2737 ioc->req_frames = NULL; 2738 ioc->alloc = NULL; 2739 ioc->alloc_total -= sz; 2740 } 2741 2742 if (ioc->sense_buf_pool != NULL) { 2743 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 2744 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, 2745 ioc->sense_buf_pool_dma); 2746 ioc->sense_buf_pool = NULL; 2747 ioc->alloc_total -= sz; 2748 } 2749 2750 if (ioc->events != NULL){ 2751 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 2752 kfree(ioc->events); 2753 ioc->events = NULL; 2754 ioc->alloc_total -= sz; 2755 } 2756 2757 mpt_free_fw_memory(ioc); 2758 2759 kfree(ioc->spi_data.nvram); 2760 mpt_inactive_raid_list_free(ioc); 2761 kfree(ioc->raid_data.pIocPg2); 2762 kfree(ioc->raid_data.pIocPg3); 2763 ioc->spi_data.nvram = NULL; 2764 ioc->raid_data.pIocPg3 = NULL; 2765 2766 if (ioc->spi_data.pIocPg4 != NULL) { 2767 sz = ioc->spi_data.IocPg4Sz; 2768 dma_free_coherent(&ioc->pcidev->dev, sz, 2769 ioc->spi_data.pIocPg4, 2770 ioc->spi_data.IocPg4_dma); 2771 ioc->spi_data.pIocPg4 = NULL; 2772 ioc->alloc_total -= sz; 2773 } 2774 2775 if (ioc->ReqToChain != NULL) { 2776 kfree(ioc->ReqToChain); 2777 kfree(ioc->RequestNB); 2778 ioc->ReqToChain = NULL; 2779 } 2780 2781 kfree(ioc->ChainToChain); 2782 ioc->ChainToChain = NULL; 2783 2784 if (ioc->HostPageBuffer != NULL) { 2785 if((ret = mpt_host_page_access_control(ioc, 2786 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { 2787 printk(MYIOC_s_ERR_FMT 2788 ": %s: host page buffers free failed (%d)!\n", 2789 ioc->name, __func__, ret); 2790 } 2791 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2792 "HostPageBuffer free @ %p, sz=%d bytes\n", 2793 ioc->name, ioc->HostPageBuffer, 2794 ioc->HostPageBuffer_sz)); 2795 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz, 2796 ioc->HostPageBuffer, ioc->HostPageBuffer_dma); 2797 ioc->HostPageBuffer = NULL; 2798 ioc->HostPageBuffer_sz = 0; 2799 ioc->alloc_total -= ioc->HostPageBuffer_sz; 2800 } 2801 2802 pci_set_drvdata(ioc->pcidev, NULL); 2803 } 2804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2805 /** 2806 * mpt_adapter_dispose - Free all resources associated with an MPT adapter 2807 * @ioc: Pointer to MPT adapter structure 2808 * 2809 * This routine unregisters h/w resources and frees all alloc'd memory 2810 * associated with a MPT adapter structure. 2811 */ 2812 static void 2813 mpt_adapter_dispose(MPT_ADAPTER *ioc) 2814 { 2815 int sz_first, sz_last; 2816 2817 if (ioc == NULL) 2818 return; 2819 2820 sz_first = ioc->alloc_total; 2821 2822 mpt_adapter_disable(ioc); 2823 2824 if (ioc->pci_irq != -1) { 2825 free_irq(ioc->pci_irq, ioc); 2826 if (ioc->msi_enable) 2827 pci_disable_msi(ioc->pcidev); 2828 ioc->pci_irq = -1; 2829 } 2830 2831 if (ioc->memmap != NULL) { 2832 iounmap(ioc->memmap); 2833 ioc->memmap = NULL; 2834 } 2835 2836 pci_disable_device(ioc->pcidev); 2837 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2838 2839 /* Zap the adapter lookup ptr! */ 2840 list_del(&ioc->list); 2841 2842 sz_last = ioc->alloc_total; 2843 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", 2844 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); 2845 2846 if (ioc->alt_ioc) 2847 ioc->alt_ioc->alt_ioc = NULL; 2848 2849 kfree(ioc); 2850 } 2851 2852 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2853 /** 2854 * MptDisplayIocCapabilities - Disply IOC's capabilities. 2855 * @ioc: Pointer to MPT adapter structure 2856 */ 2857 static void 2858 MptDisplayIocCapabilities(MPT_ADAPTER *ioc) 2859 { 2860 int i = 0; 2861 2862 printk(KERN_INFO "%s: ", ioc->name); 2863 if (ioc->prod_name) 2864 pr_cont("%s: ", ioc->prod_name); 2865 pr_cont("Capabilities={"); 2866 2867 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { 2868 pr_cont("Initiator"); 2869 i++; 2870 } 2871 2872 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2873 pr_cont("%sTarget", i ? "," : ""); 2874 i++; 2875 } 2876 2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 2878 pr_cont("%sLAN", i ? "," : ""); 2879 i++; 2880 } 2881 2882 #if 0 2883 /* 2884 * This would probably evoke more questions than it's worth 2885 */ 2886 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2887 pr_cont("%sLogBusAddr", i ? "," : ""); 2888 i++; 2889 } 2890 #endif 2891 2892 pr_cont("}\n"); 2893 } 2894 2895 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2896 /** 2897 * MakeIocReady - Get IOC to a READY state, using KickStart if needed. 2898 * @ioc: Pointer to MPT_ADAPTER structure 2899 * @force: Force hard KickStart of IOC 2900 * @sleepFlag: Specifies whether the process can sleep 2901 * 2902 * Returns: 2903 * 1 - DIAG reset and READY 2904 * 0 - READY initially OR soft reset and READY 2905 * -1 - Any failure on KickStart 2906 * -2 - Msg Unit Reset Failed 2907 * -3 - IO Unit Reset Failed 2908 * -4 - IOC owned by a PEER 2909 */ 2910 static int 2911 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) 2912 { 2913 u32 ioc_state; 2914 int statefault = 0; 2915 int cntdn; 2916 int hard_reset_done = 0; 2917 int r; 2918 int ii; 2919 int whoinit; 2920 2921 /* Get current [raw] IOC state */ 2922 ioc_state = mpt_GetIocState(ioc, 0); 2923 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); 2924 2925 /* 2926 * Check to see if IOC got left/stuck in doorbell handshake 2927 * grip of death. If so, hard reset the IOC. 2928 */ 2929 if (ioc_state & MPI_DOORBELL_ACTIVE) { 2930 statefault = 1; 2931 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", 2932 ioc->name); 2933 } 2934 2935 /* Is it already READY? */ 2936 if (!statefault && 2937 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { 2938 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2939 "IOC is in READY state\n", ioc->name)); 2940 return 0; 2941 } 2942 2943 /* 2944 * Check to see if IOC is in FAULT state. 2945 */ 2946 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 2947 statefault = 2; 2948 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", 2949 ioc->name); 2950 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", 2951 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); 2952 } 2953 2954 /* 2955 * Hmmm... Did it get left operational? 2956 */ 2957 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { 2958 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", 2959 ioc->name)); 2960 2961 /* Check WhoInit. 2962 * If PCI Peer, exit. 2963 * Else, if no fault conditions are present, issue a MessageUnitReset 2964 * Else, fall through to KickStart case 2965 */ 2966 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; 2967 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2968 "whoinit 0x%x statefault %d force %d\n", 2969 ioc->name, whoinit, statefault, force)); 2970 if (whoinit == MPI_WHOINIT_PCI_PEER) 2971 return -4; 2972 else { 2973 if ((statefault == 0 ) && (force == 0)) { 2974 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) 2975 return 0; 2976 } 2977 statefault = 3; 2978 } 2979 } 2980 2981 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); 2982 if (hard_reset_done < 0) 2983 return -1; 2984 2985 /* 2986 * Loop here waiting for IOC to come READY. 2987 */ 2988 ii = 0; 2989 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ 2990 2991 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 2992 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { 2993 /* 2994 * BIOS or previous driver load left IOC in OP state. 2995 * Reset messaging FIFOs. 2996 */ 2997 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { 2998 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); 2999 return -2; 3000 } 3001 } else if (ioc_state == MPI_IOC_STATE_RESET) { 3002 /* 3003 * Something is wrong. Try to get IOC back 3004 * to a known state. 3005 */ 3006 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { 3007 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); 3008 return -3; 3009 } 3010 } 3011 3012 ii++; cntdn--; 3013 if (!cntdn) { 3014 printk(MYIOC_s_ERR_FMT 3015 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 3016 ioc->name, ioc_state, (int)((ii+5)/HZ)); 3017 return -ETIME; 3018 } 3019 3020 if (sleepFlag == CAN_SLEEP) { 3021 msleep(1); 3022 } else { 3023 mdelay (1); /* 1 msec delay */ 3024 } 3025 3026 } 3027 3028 if (statefault < 3) { 3029 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, 3030 statefault == 1 ? "stuck handshake" : "IOC FAULT"); 3031 } 3032 3033 return hard_reset_done; 3034 } 3035 3036 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3037 /** 3038 * mpt_GetIocState - Get the current state of a MPT adapter. 3039 * @ioc: Pointer to MPT_ADAPTER structure 3040 * @cooked: Request raw or cooked IOC state 3041 * 3042 * Returns all IOC Doorbell register bits if cooked==0, else just the 3043 * Doorbell bits in MPI_IOC_STATE_MASK. 3044 */ 3045 u32 3046 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) 3047 { 3048 u32 s, sc; 3049 3050 /* Get! */ 3051 s = CHIPREG_READ32(&ioc->chip->Doorbell); 3052 sc = s & MPI_IOC_STATE_MASK; 3053 3054 /* Save! */ 3055 ioc->last_state = sc; 3056 3057 return cooked ? sc : s; 3058 } 3059 3060 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3061 /** 3062 * GetIocFacts - Send IOCFacts request to MPT adapter. 3063 * @ioc: Pointer to MPT_ADAPTER structure 3064 * @sleepFlag: Specifies whether the process can sleep 3065 * @reason: If recovery, only update facts. 3066 * 3067 * Returns 0 for success, non-zero for failure. 3068 */ 3069 static int 3070 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) 3071 { 3072 IOCFacts_t get_facts; 3073 IOCFactsReply_t *facts; 3074 int r; 3075 int req_sz; 3076 int reply_sz; 3077 int sz; 3078 u32 vv; 3079 u8 shiftFactor=1; 3080 3081 /* IOC *must* NOT be in RESET state! */ 3082 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3083 printk(KERN_ERR MYNAM 3084 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", 3085 ioc->name, ioc->last_state); 3086 return -44; 3087 } 3088 3089 facts = &ioc->facts; 3090 3091 /* Destination (reply area)... */ 3092 reply_sz = sizeof(*facts); 3093 memset(facts, 0, reply_sz); 3094 3095 /* Request area (get_facts on the stack right now!) */ 3096 req_sz = sizeof(get_facts); 3097 memset(&get_facts, 0, req_sz); 3098 3099 get_facts.Function = MPI_FUNCTION_IOC_FACTS; 3100 /* Assert: All other get_facts fields are zero! */ 3101 3102 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3103 "Sending get IocFacts request req_sz=%d reply_sz=%d\n", 3104 ioc->name, req_sz, reply_sz)); 3105 3106 /* No non-zero fields in the get_facts request are greater than 3107 * 1 byte in size, so we can just fire it off as is. 3108 */ 3109 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, 3110 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); 3111 if (r != 0) 3112 return r; 3113 3114 /* 3115 * Now byte swap (GRRR) the necessary fields before any further 3116 * inspection of reply contents. 3117 * 3118 * But need to do some sanity checks on MsgLength (byte) field 3119 * to make sure we don't zero IOC's req_sz! 3120 */ 3121 /* Did we get a valid reply? */ 3122 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { 3123 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3124 /* 3125 * If not been here, done that, save off first WhoInit value 3126 */ 3127 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) 3128 ioc->FirstWhoInit = facts->WhoInit; 3129 } 3130 3131 facts->MsgVersion = le16_to_cpu(facts->MsgVersion); 3132 facts->MsgContext = le32_to_cpu(facts->MsgContext); 3133 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); 3134 facts->IOCStatus = le16_to_cpu(facts->IOCStatus); 3135 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); 3136 /* CHECKME! IOCStatus, IOCLogInfo */ 3137 3138 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); 3139 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); 3140 3141 /* 3142 * FC f/w version changed between 1.1 and 1.2 3143 * Old: u16{Major(4),Minor(4),SubMinor(8)} 3144 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} 3145 */ 3146 if (facts->MsgVersion < MPI_VERSION_01_02) { 3147 /* 3148 * Handle old FC f/w style, convert to new... 3149 */ 3150 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); 3151 facts->FWVersion.Word = 3152 ((oldv<<12) & 0xFF000000) | 3153 ((oldv<<8) & 0x000FFF00); 3154 } else 3155 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); 3156 3157 facts->ProductID = le16_to_cpu(facts->ProductID); 3158 3159 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) 3160 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) 3161 ioc->ir_firmware = 1; 3162 3163 facts->CurrentHostMfaHighAddr = 3164 le32_to_cpu(facts->CurrentHostMfaHighAddr); 3165 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); 3166 facts->CurrentSenseBufferHighAddr = 3167 le32_to_cpu(facts->CurrentSenseBufferHighAddr); 3168 facts->CurReplyFrameSize = 3169 le16_to_cpu(facts->CurReplyFrameSize); 3170 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); 3171 3172 /* 3173 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx 3174 * Older MPI-1.00.xx struct had 13 dwords, and enlarged 3175 * to 14 in MPI-1.01.0x. 3176 */ 3177 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && 3178 facts->MsgVersion > MPI_VERSION_01_00) { 3179 facts->FWImageSize = le32_to_cpu(facts->FWImageSize); 3180 } 3181 3182 facts->FWImageSize = ALIGN(facts->FWImageSize, 4); 3183 3184 if (!facts->RequestFrameSize) { 3185 /* Something is wrong! */ 3186 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", 3187 ioc->name); 3188 return -55; 3189 } 3190 3191 r = sz = facts->BlockSize; 3192 vv = ((63 / (sz * 4)) + 1) & 0x03; 3193 ioc->NB_for_64_byte_frame = vv; 3194 while ( sz ) 3195 { 3196 shiftFactor++; 3197 sz = sz >> 1; 3198 } 3199 ioc->NBShiftFactor = shiftFactor; 3200 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3201 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", 3202 ioc->name, vv, shiftFactor, r)); 3203 3204 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3205 /* 3206 * Set values for this IOC's request & reply frame sizes, 3207 * and request & reply queue depths... 3208 */ 3209 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); 3210 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); 3211 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 3212 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); 3213 3214 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", 3215 ioc->name, ioc->reply_sz, ioc->reply_depth)); 3216 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", 3217 ioc->name, ioc->req_sz, ioc->req_depth)); 3218 3219 /* Get port facts! */ 3220 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) 3221 return r; 3222 } 3223 } else { 3224 printk(MYIOC_s_ERR_FMT 3225 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", 3226 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, 3227 RequestFrameSize)/sizeof(u32))); 3228 return -66; 3229 } 3230 3231 return 0; 3232 } 3233 3234 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3235 /** 3236 * GetPortFacts - Send PortFacts request to MPT adapter. 3237 * @ioc: Pointer to MPT_ADAPTER structure 3238 * @portnum: Port number 3239 * @sleepFlag: Specifies whether the process can sleep 3240 * 3241 * Returns 0 for success, non-zero for failure. 3242 */ 3243 static int 3244 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3245 { 3246 PortFacts_t get_pfacts; 3247 PortFactsReply_t *pfacts; 3248 int ii; 3249 int req_sz; 3250 int reply_sz; 3251 int max_id; 3252 3253 /* IOC *must* NOT be in RESET state! */ 3254 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3255 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", 3256 ioc->name, ioc->last_state ); 3257 return -4; 3258 } 3259 3260 pfacts = &ioc->pfacts[portnum]; 3261 3262 /* Destination (reply area)... */ 3263 reply_sz = sizeof(*pfacts); 3264 memset(pfacts, 0, reply_sz); 3265 3266 /* Request area (get_pfacts on the stack right now!) */ 3267 req_sz = sizeof(get_pfacts); 3268 memset(&get_pfacts, 0, req_sz); 3269 3270 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; 3271 get_pfacts.PortNumber = portnum; 3272 /* Assert: All other get_pfacts fields are zero! */ 3273 3274 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", 3275 ioc->name, portnum)); 3276 3277 /* No non-zero fields in the get_pfacts request are greater than 3278 * 1 byte in size, so we can just fire it off as is. 3279 */ 3280 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, 3281 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); 3282 if (ii != 0) 3283 return ii; 3284 3285 /* Did we get a valid reply? */ 3286 3287 /* Now byte swap the necessary fields in the response. */ 3288 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); 3289 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); 3290 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); 3291 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); 3292 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); 3293 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); 3294 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); 3295 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); 3296 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); 3297 3298 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : 3299 pfacts->MaxDevices; 3300 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; 3301 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; 3302 3303 /* 3304 * Place all the devices on channels 3305 * 3306 * (for debuging) 3307 */ 3308 if (mpt_channel_mapping) { 3309 ioc->devices_per_bus = 1; 3310 ioc->number_of_buses = (max_id > 255) ? 255 : max_id; 3311 } 3312 3313 return 0; 3314 } 3315 3316 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3317 /** 3318 * SendIocInit - Send IOCInit request to MPT adapter. 3319 * @ioc: Pointer to MPT_ADAPTER structure 3320 * @sleepFlag: Specifies whether the process can sleep 3321 * 3322 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. 3323 * 3324 * Returns 0 for success, non-zero for failure. 3325 */ 3326 static int 3327 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) 3328 { 3329 IOCInit_t ioc_init; 3330 MPIDefaultReply_t init_reply; 3331 u32 state; 3332 int r; 3333 int count; 3334 int cntdn; 3335 3336 memset(&ioc_init, 0, sizeof(ioc_init)); 3337 memset(&init_reply, 0, sizeof(init_reply)); 3338 3339 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; 3340 ioc_init.Function = MPI_FUNCTION_IOC_INIT; 3341 3342 /* If we are in a recovery mode and we uploaded the FW image, 3343 * then this pointer is not NULL. Skip the upload a second time. 3344 * Set this flag if cached_fw set for either IOC. 3345 */ 3346 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 3347 ioc->upload_fw = 1; 3348 else 3349 ioc->upload_fw = 0; 3350 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", 3351 ioc->name, ioc->upload_fw, ioc->facts.Flags)); 3352 3353 ioc_init.MaxDevices = (U8)ioc->devices_per_bus; 3354 ioc_init.MaxBuses = (U8)ioc->number_of_buses; 3355 3356 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", 3357 ioc->name, ioc->facts.MsgVersion)); 3358 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { 3359 // set MsgVersion and HeaderVersion host driver was built with 3360 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); 3361 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); 3362 3363 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { 3364 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; 3365 } else if(mpt_host_page_alloc(ioc, &ioc_init)) 3366 return -99; 3367 } 3368 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ 3369 3370 if (ioc->sg_addr_size == sizeof(u64)) { 3371 /* Save the upper 32-bits of the request 3372 * (reply) and sense buffers. 3373 */ 3374 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); 3375 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 3376 } else { 3377 /* Force 32-bit addressing */ 3378 ioc_init.HostMfaHighAddr = cpu_to_le32(0); 3379 ioc_init.SenseBufferHighAddr = cpu_to_le32(0); 3380 } 3381 3382 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; 3383 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; 3384 ioc->facts.MaxDevices = ioc_init.MaxDevices; 3385 ioc->facts.MaxBuses = ioc_init.MaxBuses; 3386 3387 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", 3388 ioc->name, &ioc_init)); 3389 3390 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, 3391 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); 3392 if (r != 0) { 3393 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); 3394 return r; 3395 } 3396 3397 /* No need to byte swap the multibyte fields in the reply 3398 * since we don't even look at its contents. 3399 */ 3400 3401 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", 3402 ioc->name, &ioc_init)); 3403 3404 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { 3405 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); 3406 return r; 3407 } 3408 3409 /* YIKES! SUPER IMPORTANT!!! 3410 * Poll IocState until _OPERATIONAL while IOC is doing 3411 * LoopInit and TargetDiscovery! 3412 */ 3413 count = 0; 3414 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ 3415 state = mpt_GetIocState(ioc, 1); 3416 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { 3417 if (sleepFlag == CAN_SLEEP) { 3418 msleep(1); 3419 } else { 3420 mdelay(1); 3421 } 3422 3423 if (!cntdn) { 3424 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", 3425 ioc->name, (int)((count+5)/HZ)); 3426 return -9; 3427 } 3428 3429 state = mpt_GetIocState(ioc, 1); 3430 count++; 3431 } 3432 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", 3433 ioc->name, count)); 3434 3435 ioc->aen_event_read_flag=0; 3436 return r; 3437 } 3438 3439 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3440 /** 3441 * SendPortEnable - Send PortEnable request to MPT adapter port. 3442 * @ioc: Pointer to MPT_ADAPTER structure 3443 * @portnum: Port number to enable 3444 * @sleepFlag: Specifies whether the process can sleep 3445 * 3446 * Send PortEnable to bring IOC to OPERATIONAL state. 3447 * 3448 * Returns 0 for success, non-zero for failure. 3449 */ 3450 static int 3451 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3452 { 3453 PortEnable_t port_enable; 3454 MPIDefaultReply_t reply_buf; 3455 int rc; 3456 int req_sz; 3457 int reply_sz; 3458 3459 /* Destination... */ 3460 reply_sz = sizeof(MPIDefaultReply_t); 3461 memset(&reply_buf, 0, reply_sz); 3462 3463 req_sz = sizeof(PortEnable_t); 3464 memset(&port_enable, 0, req_sz); 3465 3466 port_enable.Function = MPI_FUNCTION_PORT_ENABLE; 3467 port_enable.PortNumber = portnum; 3468 /* port_enable.ChainOffset = 0; */ 3469 /* port_enable.MsgFlags = 0; */ 3470 /* port_enable.MsgContext = 0; */ 3471 3472 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", 3473 ioc->name, portnum, &port_enable)); 3474 3475 /* RAID FW may take a long time to enable 3476 */ 3477 if (ioc->ir_firmware || ioc->bus_type == SAS) { 3478 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3479 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3480 300 /*seconds*/, sleepFlag); 3481 } else { 3482 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3483 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3484 30 /*seconds*/, sleepFlag); 3485 } 3486 return rc; 3487 } 3488 3489 /** 3490 * mpt_alloc_fw_memory - allocate firmware memory 3491 * @ioc: Pointer to MPT_ADAPTER structure 3492 * @size: total FW bytes 3493 * 3494 * If memory has already been allocated, the same (cached) value 3495 * is returned. 3496 * 3497 * Return 0 if successful, or non-zero for failure 3498 **/ 3499 int 3500 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) 3501 { 3502 int rc; 3503 3504 if (ioc->cached_fw) { 3505 rc = 0; /* use already allocated memory */ 3506 goto out; 3507 } 3508 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 3509 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ 3510 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; 3511 rc = 0; 3512 goto out; 3513 } 3514 ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size, 3515 &ioc->cached_fw_dma, GFP_ATOMIC); 3516 if (!ioc->cached_fw) { 3517 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", 3518 ioc->name); 3519 rc = -1; 3520 } else { 3521 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", 3522 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); 3523 ioc->alloc_total += size; 3524 rc = 0; 3525 } 3526 out: 3527 return rc; 3528 } 3529 3530 /** 3531 * mpt_free_fw_memory - free firmware memory 3532 * @ioc: Pointer to MPT_ADAPTER structure 3533 * 3534 * If alt_img is NULL, delete from ioc structure. 3535 * Else, delete a secondary image in same format. 3536 **/ 3537 void 3538 mpt_free_fw_memory(MPT_ADAPTER *ioc) 3539 { 3540 int sz; 3541 3542 if (!ioc->cached_fw) 3543 return; 3544 3545 sz = ioc->facts.FWImageSize; 3546 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", 3547 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3548 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw, 3549 ioc->cached_fw_dma); 3550 ioc->alloc_total -= sz; 3551 ioc->cached_fw = NULL; 3552 } 3553 3554 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3555 /** 3556 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. 3557 * @ioc: Pointer to MPT_ADAPTER structure 3558 * @sleepFlag: Specifies whether the process can sleep 3559 * 3560 * Returns 0 for success, >0 for handshake failure 3561 * <0 for fw upload failure. 3562 * 3563 * Remark: If bound IOC and a successful FWUpload was performed 3564 * on the bound IOC, the second image is discarded 3565 * and memory is free'd. Both channels must upload to prevent 3566 * IOC from running in degraded mode. 3567 */ 3568 static int 3569 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) 3570 { 3571 u8 reply[sizeof(FWUploadReply_t)]; 3572 FWUpload_t *prequest; 3573 FWUploadReply_t *preply; 3574 FWUploadTCSGE_t *ptcsge; 3575 u32 flagsLength; 3576 int ii, sz, reply_sz; 3577 int cmdStatus; 3578 int request_size; 3579 /* If the image size is 0, we are done. 3580 */ 3581 if ((sz = ioc->facts.FWImageSize) == 0) 3582 return 0; 3583 3584 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) 3585 return -ENOMEM; 3586 3587 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", 3588 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3589 3590 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : 3591 kzalloc(ioc->req_sz, GFP_KERNEL); 3592 if (!prequest) { 3593 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " 3594 "while allocating memory \n", ioc->name)); 3595 mpt_free_fw_memory(ioc); 3596 return -ENOMEM; 3597 } 3598 3599 preply = (FWUploadReply_t *)&reply; 3600 3601 reply_sz = sizeof(reply); 3602 memset(preply, 0, reply_sz); 3603 3604 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; 3605 prequest->Function = MPI_FUNCTION_FW_UPLOAD; 3606 3607 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; 3608 ptcsge->DetailsLength = 12; 3609 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 3610 ptcsge->ImageSize = cpu_to_le32(sz); 3611 ptcsge++; 3612 3613 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; 3614 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); 3615 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + 3616 ioc->SGE_size; 3617 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " 3618 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, 3619 ioc->facts.FWImageSize, request_size)); 3620 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); 3621 3622 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, 3623 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); 3624 3625 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " 3626 "rc=%x \n", ioc->name, ii)); 3627 3628 cmdStatus = -EFAULT; 3629 if (ii == 0) { 3630 /* Handshake transfer was complete and successful. 3631 * Check the Reply Frame. 3632 */ 3633 int status; 3634 status = le16_to_cpu(preply->IOCStatus) & 3635 MPI_IOCSTATUS_MASK; 3636 if (status == MPI_IOCSTATUS_SUCCESS && 3637 ioc->facts.FWImageSize == 3638 le32_to_cpu(preply->ActualImageSize)) 3639 cmdStatus = 0; 3640 } 3641 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", 3642 ioc->name, cmdStatus)); 3643 3644 3645 if (cmdStatus) { 3646 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " 3647 "freeing image \n", ioc->name)); 3648 mpt_free_fw_memory(ioc); 3649 } 3650 kfree(prequest); 3651 3652 return cmdStatus; 3653 } 3654 3655 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3656 /** 3657 * mpt_downloadboot - DownloadBoot code 3658 * @ioc: Pointer to MPT_ADAPTER structure 3659 * @pFwHeader: Pointer to firmware header info 3660 * @sleepFlag: Specifies whether the process can sleep 3661 * 3662 * FwDownloadBoot requires Programmed IO access. 3663 * 3664 * Returns 0 for success 3665 * -1 FW Image size is 0 3666 * -2 No valid cached_fw Pointer 3667 * <0 for fw upload failure. 3668 */ 3669 static int 3670 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) 3671 { 3672 MpiExtImageHeader_t *pExtImage; 3673 u32 fwSize; 3674 u32 diag0val; 3675 int count; 3676 u32 *ptrFw; 3677 u32 diagRwData; 3678 u32 nextImage; 3679 u32 load_addr; 3680 u32 ioc_state=0; 3681 3682 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", 3683 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); 3684 3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3688 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3691 3692 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); 3693 3694 /* wait 1 msec */ 3695 if (sleepFlag == CAN_SLEEP) { 3696 msleep(1); 3697 } else { 3698 mdelay (1); 3699 } 3700 3701 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3702 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 3703 3704 for (count = 0; count < 30; count ++) { 3705 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3706 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 3707 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", 3708 ioc->name, count)); 3709 break; 3710 } 3711 /* wait .1 sec */ 3712 if (sleepFlag == CAN_SLEEP) { 3713 msleep (100); 3714 } else { 3715 mdelay (100); 3716 } 3717 } 3718 3719 if ( count == 30 ) { 3720 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " 3721 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", 3722 ioc->name, diag0val)); 3723 return -3; 3724 } 3725 3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3729 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3732 3733 /* Set the DiagRwEn and Disable ARM bits */ 3734 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); 3735 3736 fwSize = (pFwHeader->ImageSize + 3)/4; 3737 ptrFw = (u32 *) pFwHeader; 3738 3739 /* Write the LoadStartAddress to the DiagRw Address Register 3740 * using Programmed IO 3741 */ 3742 if (ioc->errata_flag_1064) 3743 pci_enable_io_access(ioc->pcidev); 3744 3745 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); 3746 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", 3747 ioc->name, pFwHeader->LoadStartAddress)); 3748 3749 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", 3750 ioc->name, fwSize*4, ptrFw)); 3751 while (fwSize--) { 3752 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3753 } 3754 3755 nextImage = pFwHeader->NextImageHeaderOffset; 3756 while (nextImage) { 3757 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); 3758 3759 load_addr = pExtImage->LoadStartAddress; 3760 3761 fwSize = (pExtImage->ImageSize + 3) >> 2; 3762 ptrFw = (u32 *)pExtImage; 3763 3764 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", 3765 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); 3766 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); 3767 3768 while (fwSize--) { 3769 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3770 } 3771 nextImage = pExtImage->NextImageHeaderOffset; 3772 } 3773 3774 /* Write the IopResetVectorRegAddr */ 3775 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); 3776 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); 3777 3778 /* Write the IopResetVectorValue */ 3779 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); 3780 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); 3781 3782 /* Clear the internal flash bad bit - autoincrementing register, 3783 * so must do two writes. 3784 */ 3785 if (ioc->bus_type == SPI) { 3786 /* 3787 * 1030 and 1035 H/W errata, workaround to access 3788 * the ClearFlashBadSignatureBit 3789 */ 3790 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3791 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); 3792 diagRwData |= 0x40000000; 3793 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3794 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); 3795 3796 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { 3797 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3798 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | 3799 MPI_DIAG_CLEAR_FLASH_BAD_SIG); 3800 3801 /* wait 1 msec */ 3802 if (sleepFlag == CAN_SLEEP) { 3803 msleep (1); 3804 } else { 3805 mdelay (1); 3806 } 3807 } 3808 3809 if (ioc->errata_flag_1064) 3810 pci_disable_io_access(ioc->pcidev); 3811 3812 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3813 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " 3814 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", 3815 ioc->name, diag0val)); 3816 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); 3817 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", 3818 ioc->name, diag0val)); 3819 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 3820 3821 /* Write 0xFF to reset the sequencer */ 3822 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3823 3824 if (ioc->bus_type == SAS) { 3825 ioc_state = mpt_GetIocState(ioc, 0); 3826 if ( (GetIocFacts(ioc, sleepFlag, 3827 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { 3828 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", 3829 ioc->name, ioc_state)); 3830 return -EFAULT; 3831 } 3832 } 3833 3834 for (count=0; count<HZ*20; count++) { 3835 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { 3836 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3837 "downloadboot successful! (count=%d) IocState=%x\n", 3838 ioc->name, count, ioc_state)); 3839 if (ioc->bus_type == SAS) { 3840 return 0; 3841 } 3842 if ((SendIocInit(ioc, sleepFlag)) != 0) { 3843 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3844 "downloadboot: SendIocInit failed\n", 3845 ioc->name)); 3846 return -EFAULT; 3847 } 3848 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3849 "downloadboot: SendIocInit successful\n", 3850 ioc->name)); 3851 return 0; 3852 } 3853 if (sleepFlag == CAN_SLEEP) { 3854 msleep (10); 3855 } else { 3856 mdelay (10); 3857 } 3858 } 3859 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3860 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); 3861 return -EFAULT; 3862 } 3863 3864 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3865 /** 3866 * KickStart - Perform hard reset of MPT adapter. 3867 * @ioc: Pointer to MPT_ADAPTER structure 3868 * @force: Force hard reset 3869 * @sleepFlag: Specifies whether the process can sleep 3870 * 3871 * This routine places MPT adapter in diagnostic mode via the 3872 * WriteSequence register, and then performs a hard reset of adapter 3873 * via the Diagnostic register. 3874 * 3875 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) 3876 * or NO_SLEEP (interrupt thread, use mdelay) 3877 * force - 1 if doorbell active, board fault state 3878 * board operational, IOC_RECOVERY or 3879 * IOC_BRINGUP and there is an alt_ioc. 3880 * 0 else 3881 * 3882 * Returns: 3883 * 1 - hard reset, READY 3884 * 0 - no reset due to History bit, READY 3885 * -1 - no reset due to History bit but not READY 3886 * OR reset but failed to come READY 3887 * -2 - no reset, could not enter DIAG mode 3888 * -3 - reset but bad FW bit 3889 */ 3890 static int 3891 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) 3892 { 3893 int hard_reset_done = 0; 3894 u32 ioc_state=0; 3895 int cnt,cntdn; 3896 3897 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); 3898 if (ioc->bus_type == SPI) { 3899 /* Always issue a Msg Unit Reset first. This will clear some 3900 * SCSI bus hang conditions. 3901 */ 3902 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 3903 3904 if (sleepFlag == CAN_SLEEP) { 3905 msleep (1000); 3906 } else { 3907 mdelay (1000); 3908 } 3909 } 3910 3911 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); 3912 if (hard_reset_done < 0) 3913 return hard_reset_done; 3914 3915 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", 3916 ioc->name)); 3917 3918 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ 3919 for (cnt=0; cnt<cntdn; cnt++) { 3920 ioc_state = mpt_GetIocState(ioc, 1); 3921 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { 3922 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", 3923 ioc->name, cnt)); 3924 return hard_reset_done; 3925 } 3926 if (sleepFlag == CAN_SLEEP) { 3927 msleep (10); 3928 } else { 3929 mdelay (10); 3930 } 3931 } 3932 3933 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", 3934 ioc->name, mpt_GetIocState(ioc, 0))); 3935 return -1; 3936 } 3937 3938 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3939 /** 3940 * mpt_diag_reset - Perform hard reset of the adapter. 3941 * @ioc: Pointer to MPT_ADAPTER structure 3942 * @ignore: Set if to honor and clear to ignore 3943 * the reset history bit 3944 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, 3945 * else set to NO_SLEEP (use mdelay instead) 3946 * 3947 * This routine places the adapter in diagnostic mode via the 3948 * WriteSequence register and then performs a hard reset of adapter 3949 * via the Diagnostic register. Adapter should be in ready state 3950 * upon successful completion. 3951 * 3952 * Returns: 1 hard reset successful 3953 * 0 no reset performed because reset history bit set 3954 * -2 enabling diagnostic mode failed 3955 * -3 diagnostic reset failed 3956 */ 3957 static int 3958 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) 3959 { 3960 u32 diag0val; 3961 u32 doorbell; 3962 int hard_reset_done = 0; 3963 int count = 0; 3964 u32 diag1val = 0; 3965 MpiFwHeader_t *cached_fw; /* Pointer to FW */ 3966 u8 cb_idx; 3967 3968 /* Clear any existing interrupts */ 3969 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 3970 3971 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { 3972 3973 if (!ignore) 3974 return 0; 3975 3976 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " 3977 "address=%p\n", ioc->name, __func__, 3978 &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); 3979 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); 3980 if (sleepFlag == CAN_SLEEP) 3981 msleep(1); 3982 else 3983 mdelay(1); 3984 3985 /* 3986 * Call each currently registered protocol IOC reset handler 3987 * with pre-reset indication. 3988 * NOTE: If we're doing _IOC_BRINGUP, there can be no 3989 * MptResetHandlers[] registered yet. 3990 */ 3991 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 3992 if (MptResetHandlers[cb_idx]) 3993 (*(MptResetHandlers[cb_idx]))(ioc, 3994 MPT_IOC_PRE_RESET); 3995 } 3996 3997 for (count = 0; count < 60; count ++) { 3998 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 3999 doorbell &= MPI_IOC_STATE_MASK; 4000 4001 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4002 "looking for READY STATE: doorbell=%x" 4003 " count=%d\n", 4004 ioc->name, doorbell, count)); 4005 4006 if (doorbell == MPI_IOC_STATE_READY) { 4007 return 1; 4008 } 4009 4010 /* wait 1 sec */ 4011 if (sleepFlag == CAN_SLEEP) 4012 msleep(1000); 4013 else 4014 mdelay(1000); 4015 } 4016 return -1; 4017 } 4018 4019 /* Use "Diagnostic reset" method! (only thing available!) */ 4020 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4021 4022 if (ioc->debug_level & MPT_DEBUG) { 4023 if (ioc->alt_ioc) 4024 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4025 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", 4026 ioc->name, diag0val, diag1val)); 4027 } 4028 4029 /* Do the reset if we are told to ignore the reset history 4030 * or if the reset history is 0 4031 */ 4032 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { 4033 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4034 /* Write magic sequence to WriteSequence register 4035 * Loop until in diagnostic mode 4036 */ 4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4040 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4043 4044 /* wait 100 msec */ 4045 if (sleepFlag == CAN_SLEEP) { 4046 msleep (100); 4047 } else { 4048 mdelay (100); 4049 } 4050 4051 count++; 4052 if (count > 20) { 4053 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4054 ioc->name, diag0val); 4055 return -2; 4056 4057 } 4058 4059 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4060 4061 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", 4062 ioc->name, diag0val)); 4063 } 4064 4065 if (ioc->debug_level & MPT_DEBUG) { 4066 if (ioc->alt_ioc) 4067 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4068 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", 4069 ioc->name, diag0val, diag1val)); 4070 } 4071 /* 4072 * Disable the ARM (Bug fix) 4073 * 4074 */ 4075 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); 4076 mdelay(1); 4077 4078 /* 4079 * Now hit the reset bit in the Diagnostic register 4080 * (THE BIG HAMMER!) (Clears DRWE bit). 4081 */ 4082 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 4083 hard_reset_done = 1; 4084 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", 4085 ioc->name)); 4086 4087 /* 4088 * Call each currently registered protocol IOC reset handler 4089 * with pre-reset indication. 4090 * NOTE: If we're doing _IOC_BRINGUP, there can be no 4091 * MptResetHandlers[] registered yet. 4092 */ 4093 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 4094 if (MptResetHandlers[cb_idx]) { 4095 mpt_signal_reset(cb_idx, 4096 ioc, MPT_IOC_PRE_RESET); 4097 if (ioc->alt_ioc) { 4098 mpt_signal_reset(cb_idx, 4099 ioc->alt_ioc, MPT_IOC_PRE_RESET); 4100 } 4101 } 4102 } 4103 4104 if (ioc->cached_fw) 4105 cached_fw = (MpiFwHeader_t *)ioc->cached_fw; 4106 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) 4107 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; 4108 else 4109 cached_fw = NULL; 4110 if (cached_fw) { 4111 /* If the DownloadBoot operation fails, the 4112 * IOC will be left unusable. This is a fatal error 4113 * case. _diag_reset will return < 0 4114 */ 4115 for (count = 0; count < 30; count ++) { 4116 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4117 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 4118 break; 4119 } 4120 4121 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", 4122 ioc->name, diag0val, count)); 4123 /* wait 1 sec */ 4124 if (sleepFlag == CAN_SLEEP) { 4125 msleep (1000); 4126 } else { 4127 mdelay (1000); 4128 } 4129 } 4130 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { 4131 printk(MYIOC_s_WARN_FMT 4132 "firmware downloadboot failure (%d)!\n", ioc->name, count); 4133 } 4134 4135 } else { 4136 /* Wait for FW to reload and for board 4137 * to go to the READY state. 4138 * Maximum wait is 60 seconds. 4139 * If fail, no error will check again 4140 * with calling program. 4141 */ 4142 for (count = 0; count < 60; count ++) { 4143 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4144 doorbell &= MPI_IOC_STATE_MASK; 4145 4146 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4147 "looking for READY STATE: doorbell=%x" 4148 " count=%d\n", ioc->name, doorbell, count)); 4149 4150 if (doorbell == MPI_IOC_STATE_READY) { 4151 break; 4152 } 4153 4154 /* wait 1 sec */ 4155 if (sleepFlag == CAN_SLEEP) { 4156 msleep (1000); 4157 } else { 4158 mdelay (1000); 4159 } 4160 } 4161 4162 if (doorbell != MPI_IOC_STATE_READY) 4163 printk(MYIOC_s_ERR_FMT "Failed to come READY " 4164 "after reset! IocState=%x", ioc->name, 4165 doorbell); 4166 } 4167 } 4168 4169 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4170 if (ioc->debug_level & MPT_DEBUG) { 4171 if (ioc->alt_ioc) 4172 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4173 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", 4174 ioc->name, diag0val, diag1val)); 4175 } 4176 4177 /* Clear RESET_HISTORY bit! Place board in the 4178 * diagnostic mode to update the diag register. 4179 */ 4180 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4181 count = 0; 4182 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4183 /* Write magic sequence to WriteSequence register 4184 * Loop until in diagnostic mode 4185 */ 4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4189 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4192 4193 /* wait 100 msec */ 4194 if (sleepFlag == CAN_SLEEP) { 4195 msleep (100); 4196 } else { 4197 mdelay (100); 4198 } 4199 4200 count++; 4201 if (count > 20) { 4202 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4203 ioc->name, diag0val); 4204 break; 4205 } 4206 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4207 } 4208 diag0val &= ~MPI_DIAG_RESET_HISTORY; 4209 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 4210 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4211 if (diag0val & MPI_DIAG_RESET_HISTORY) { 4212 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", 4213 ioc->name); 4214 } 4215 4216 /* Disable Diagnostic Mode 4217 */ 4218 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); 4219 4220 /* Check FW reload status flags. 4221 */ 4222 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4223 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { 4224 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", 4225 ioc->name, diag0val); 4226 return -3; 4227 } 4228 4229 if (ioc->debug_level & MPT_DEBUG) { 4230 if (ioc->alt_ioc) 4231 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4232 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", 4233 ioc->name, diag0val, diag1val)); 4234 } 4235 4236 /* 4237 * Reset flag that says we've enabled event notification 4238 */ 4239 ioc->facts.EventState = 0; 4240 4241 if (ioc->alt_ioc) 4242 ioc->alt_ioc->facts.EventState = 0; 4243 4244 return hard_reset_done; 4245 } 4246 4247 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4248 /** 4249 * SendIocReset - Send IOCReset request to MPT adapter. 4250 * @ioc: Pointer to MPT_ADAPTER structure 4251 * @reset_type: reset type, expected values are 4252 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET 4253 * @sleepFlag: Specifies whether the process can sleep 4254 * 4255 * Send IOCReset request to the MPT adapter. 4256 * 4257 * Returns 0 for success, non-zero for failure. 4258 */ 4259 static int 4260 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) 4261 { 4262 int r; 4263 u32 state; 4264 int cntdn, count; 4265 4266 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", 4267 ioc->name, reset_type)); 4268 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); 4269 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4270 return r; 4271 4272 /* FW ACK'd request, wait for READY state 4273 */ 4274 count = 0; 4275 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ 4276 4277 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 4278 cntdn--; 4279 count++; 4280 if (!cntdn) { 4281 if (sleepFlag != CAN_SLEEP) 4282 count *= 10; 4283 4284 printk(MYIOC_s_ERR_FMT 4285 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 4286 ioc->name, state, (int)((count+5)/HZ)); 4287 return -ETIME; 4288 } 4289 4290 if (sleepFlag == CAN_SLEEP) { 4291 msleep(1); 4292 } else { 4293 mdelay (1); /* 1 msec delay */ 4294 } 4295 } 4296 4297 /* TODO! 4298 * Cleanup all event stuff for this IOC; re-issue EventNotification 4299 * request if needed. 4300 */ 4301 if (ioc->facts.Function) 4302 ioc->facts.EventState = 0; 4303 4304 return 0; 4305 } 4306 4307 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4308 /** 4309 * initChainBuffers - Allocate memory for and initialize chain buffers 4310 * @ioc: Pointer to MPT_ADAPTER structure 4311 * 4312 * Allocates memory for and initializes chain buffers, 4313 * chain buffer control arrays and spinlock. 4314 */ 4315 static int 4316 initChainBuffers(MPT_ADAPTER *ioc) 4317 { 4318 u8 *mem; 4319 int sz, ii, num_chain; 4320 int scale, num_sge, numSGE; 4321 4322 /* ReqToChain size must equal the req_depth 4323 * index = req_idx 4324 */ 4325 if (ioc->ReqToChain == NULL) { 4326 sz = ioc->req_depth * sizeof(int); 4327 mem = kmalloc(sz, GFP_ATOMIC); 4328 if (mem == NULL) 4329 return -1; 4330 4331 ioc->ReqToChain = (int *) mem; 4332 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", 4333 ioc->name, mem, sz)); 4334 mem = kmalloc(sz, GFP_ATOMIC); 4335 if (mem == NULL) 4336 return -1; 4337 4338 ioc->RequestNB = (int *) mem; 4339 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", 4340 ioc->name, mem, sz)); 4341 } 4342 for (ii = 0; ii < ioc->req_depth; ii++) { 4343 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; 4344 } 4345 4346 /* ChainToChain size must equal the total number 4347 * of chain buffers to be allocated. 4348 * index = chain_idx 4349 * 4350 * Calculate the number of chain buffers needed(plus 1) per I/O 4351 * then multiply the maximum number of simultaneous cmds 4352 * 4353 * num_sge = num sge in request frame + last chain buffer 4354 * scale = num sge per chain buffer if no chain element 4355 */ 4356 scale = ioc->req_sz / ioc->SGE_size; 4357 if (ioc->sg_addr_size == sizeof(u64)) 4358 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; 4359 else 4360 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; 4361 4362 if (ioc->sg_addr_size == sizeof(u64)) { 4363 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + 4364 (ioc->req_sz - 60) / ioc->SGE_size; 4365 } else { 4366 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + 4367 scale + (ioc->req_sz - 64) / ioc->SGE_size; 4368 } 4369 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", 4370 ioc->name, num_sge, numSGE)); 4371 4372 if (ioc->bus_type == FC) { 4373 if (numSGE > MPT_SCSI_FC_SG_DEPTH) 4374 numSGE = MPT_SCSI_FC_SG_DEPTH; 4375 } else { 4376 if (numSGE > MPT_SCSI_SG_DEPTH) 4377 numSGE = MPT_SCSI_SG_DEPTH; 4378 } 4379 4380 num_chain = 1; 4381 while (numSGE - num_sge > 0) { 4382 num_chain++; 4383 num_sge += (scale - 1); 4384 } 4385 num_chain++; 4386 4387 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", 4388 ioc->name, numSGE, num_sge, num_chain)); 4389 4390 if (ioc->bus_type == SPI) 4391 num_chain *= MPT_SCSI_CAN_QUEUE; 4392 else if (ioc->bus_type == SAS) 4393 num_chain *= MPT_SAS_CAN_QUEUE; 4394 else 4395 num_chain *= MPT_FC_CAN_QUEUE; 4396 4397 ioc->num_chain = num_chain; 4398 4399 sz = num_chain * sizeof(int); 4400 if (ioc->ChainToChain == NULL) { 4401 mem = kmalloc(sz, GFP_ATOMIC); 4402 if (mem == NULL) 4403 return -1; 4404 4405 ioc->ChainToChain = (int *) mem; 4406 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", 4407 ioc->name, mem, sz)); 4408 } else { 4409 mem = (u8 *) ioc->ChainToChain; 4410 } 4411 memset(mem, 0xFF, sz); 4412 return num_chain; 4413 } 4414 4415 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4416 /** 4417 * PrimeIocFifos - Initialize IOC request and reply FIFOs. 4418 * @ioc: Pointer to MPT_ADAPTER structure 4419 * 4420 * This routine allocates memory for the MPT reply and request frame 4421 * pools (if necessary), and primes the IOC reply FIFO with 4422 * reply frames. 4423 * 4424 * Returns 0 for success, non-zero for failure. 4425 */ 4426 static int 4427 PrimeIocFifos(MPT_ADAPTER *ioc) 4428 { 4429 MPT_FRAME_HDR *mf; 4430 unsigned long flags; 4431 dma_addr_t alloc_dma; 4432 u8 *mem; 4433 int i, reply_sz, sz, total_size, num_chain; 4434 u64 dma_mask; 4435 4436 dma_mask = 0; 4437 4438 /* Prime reply FIFO... */ 4439 4440 if (ioc->reply_frames == NULL) { 4441 if ( (num_chain = initChainBuffers(ioc)) < 0) 4442 return -1; 4443 /* 4444 * 1078 errata workaround for the 36GB limitation 4445 */ 4446 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && 4447 ioc->dma_mask > DMA_BIT_MASK(35)) { 4448 if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32)) 4449 && !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) { 4450 dma_mask = DMA_BIT_MASK(35); 4451 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4452 "setting 35 bit addressing for " 4453 "Request/Reply/Chain and Sense Buffers\n", 4454 ioc->name)); 4455 } else { 4456 /*Reseting DMA mask to 64 bit*/ 4457 dma_set_mask(&ioc->pcidev->dev, 4458 DMA_BIT_MASK(64)); 4459 dma_set_coherent_mask(&ioc->pcidev->dev, 4460 DMA_BIT_MASK(64)); 4461 4462 printk(MYIOC_s_ERR_FMT 4463 "failed setting 35 bit addressing for " 4464 "Request/Reply/Chain and Sense Buffers\n", 4465 ioc->name); 4466 return -1; 4467 } 4468 } 4469 4470 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); 4471 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", 4472 ioc->name, ioc->reply_sz, ioc->reply_depth)); 4473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", 4474 ioc->name, reply_sz, reply_sz)); 4475 4476 sz = (ioc->req_sz * ioc->req_depth); 4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", 4478 ioc->name, ioc->req_sz, ioc->req_depth)); 4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", 4480 ioc->name, sz, sz)); 4481 total_size += sz; 4482 4483 sz = num_chain * ioc->req_sz; /* chain buffer pool size */ 4484 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", 4485 ioc->name, ioc->req_sz, num_chain)); 4486 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", 4487 ioc->name, sz, sz, num_chain)); 4488 4489 total_size += sz; 4490 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size, 4491 &alloc_dma, GFP_KERNEL); 4492 if (mem == NULL) { 4493 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", 4494 ioc->name); 4495 goto out_fail; 4496 } 4497 4498 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", 4499 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); 4500 4501 memset(mem, 0, total_size); 4502 ioc->alloc_total += total_size; 4503 ioc->alloc = mem; 4504 ioc->alloc_dma = alloc_dma; 4505 ioc->alloc_sz = total_size; 4506 ioc->reply_frames = (MPT_FRAME_HDR *) mem; 4507 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4508 4509 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4510 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4511 4512 alloc_dma += reply_sz; 4513 mem += reply_sz; 4514 4515 /* Request FIFO - WE manage this! */ 4516 4517 ioc->req_frames = (MPT_FRAME_HDR *) mem; 4518 ioc->req_frames_dma = alloc_dma; 4519 4520 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", 4521 ioc->name, mem, (void *)(ulong)alloc_dma)); 4522 4523 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4524 4525 for (i = 0; i < ioc->req_depth; i++) { 4526 alloc_dma += ioc->req_sz; 4527 mem += ioc->req_sz; 4528 } 4529 4530 ioc->ChainBuffer = mem; 4531 ioc->ChainBufferDMA = alloc_dma; 4532 4533 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", 4534 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); 4535 4536 /* Initialize the free chain Q. 4537 */ 4538 4539 INIT_LIST_HEAD(&ioc->FreeChainQ); 4540 4541 /* Post the chain buffers to the FreeChainQ. 4542 */ 4543 mem = (u8 *)ioc->ChainBuffer; 4544 for (i=0; i < num_chain; i++) { 4545 mf = (MPT_FRAME_HDR *) mem; 4546 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); 4547 mem += ioc->req_sz; 4548 } 4549 4550 /* Initialize Request frames linked list 4551 */ 4552 alloc_dma = ioc->req_frames_dma; 4553 mem = (u8 *) ioc->req_frames; 4554 4555 spin_lock_irqsave(&ioc->FreeQlock, flags); 4556 INIT_LIST_HEAD(&ioc->FreeQ); 4557 for (i = 0; i < ioc->req_depth; i++) { 4558 mf = (MPT_FRAME_HDR *) mem; 4559 4560 /* Queue REQUESTs *internally*! */ 4561 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); 4562 4563 mem += ioc->req_sz; 4564 } 4565 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 4566 4567 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4568 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz, 4569 &ioc->sense_buf_pool_dma, GFP_KERNEL); 4570 if (ioc->sense_buf_pool == NULL) { 4571 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", 4572 ioc->name); 4573 goto out_fail; 4574 } 4575 4576 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); 4577 ioc->alloc_total += sz; 4578 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", 4579 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); 4580 4581 } 4582 4583 /* Post Reply frames to FIFO 4584 */ 4585 alloc_dma = ioc->alloc_dma; 4586 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4587 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4588 4589 for (i = 0; i < ioc->reply_depth; i++) { 4590 /* Write each address to the IOC! */ 4591 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); 4592 alloc_dma += ioc->reply_sz; 4593 } 4594 4595 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, 4596 ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev, 4597 ioc->dma_mask)) 4598 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4599 "restoring 64 bit addressing\n", ioc->name)); 4600 4601 return 0; 4602 4603 out_fail: 4604 4605 if (ioc->alloc != NULL) { 4606 sz = ioc->alloc_sz; 4607 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, 4608 ioc->alloc_dma); 4609 ioc->reply_frames = NULL; 4610 ioc->req_frames = NULL; 4611 ioc->alloc_total -= sz; 4612 } 4613 if (ioc->sense_buf_pool != NULL) { 4614 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4615 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, 4616 ioc->sense_buf_pool_dma); 4617 ioc->sense_buf_pool = NULL; 4618 } 4619 4620 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, 4621 DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev, 4622 DMA_BIT_MASK(64))) 4623 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4624 "restoring 64 bit addressing\n", ioc->name)); 4625 4626 return -1; 4627 } 4628 4629 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4630 /** 4631 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply 4632 * from IOC via doorbell handshake method. 4633 * @ioc: Pointer to MPT_ADAPTER structure 4634 * @reqBytes: Size of the request in bytes 4635 * @req: Pointer to MPT request frame 4636 * @replyBytes: Expected size of the reply in bytes 4637 * @u16reply: Pointer to area where reply should be written 4638 * @maxwait: Max wait time for a reply (in seconds) 4639 * @sleepFlag: Specifies whether the process can sleep 4640 * 4641 * NOTES: It is the callers responsibility to byte-swap fields in the 4642 * request which are greater than 1 byte in size. It is also the 4643 * callers responsibility to byte-swap response fields which are 4644 * greater than 1 byte in size. 4645 * 4646 * Returns 0 for success, non-zero for failure. 4647 */ 4648 static int 4649 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, 4650 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) 4651 { 4652 MPIDefaultReply_t *mptReply; 4653 int failcnt = 0; 4654 int t; 4655 4656 /* 4657 * Get ready to cache a handshake reply 4658 */ 4659 ioc->hs_reply_idx = 0; 4660 mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4661 mptReply->MsgLength = 0; 4662 4663 /* 4664 * Make sure there are no doorbells (WRITE 0 to IntStatus reg), 4665 * then tell IOC that we want to handshake a request of N words. 4666 * (WRITE u32val to Doorbell reg). 4667 */ 4668 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4669 CHIPREG_WRITE32(&ioc->chip->Doorbell, 4670 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 4671 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 4672 4673 /* 4674 * Wait for IOC's doorbell handshake int 4675 */ 4676 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4677 failcnt++; 4678 4679 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", 4680 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4681 4682 /* Read doorbell and check for active bit */ 4683 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 4684 return -1; 4685 4686 /* 4687 * Clear doorbell int (WRITE 0 to IntStatus reg), 4688 * then wait for IOC to ACKnowledge that it's ready for 4689 * our handshake request. 4690 */ 4691 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4692 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4693 failcnt++; 4694 4695 if (!failcnt) { 4696 int ii; 4697 u8 *req_as_bytes = (u8 *) req; 4698 4699 /* 4700 * Stuff request words via doorbell handshake, 4701 * with ACK from IOC for each. 4702 */ 4703 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { 4704 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | 4705 (req_as_bytes[(ii*4) + 1] << 8) | 4706 (req_as_bytes[(ii*4) + 2] << 16) | 4707 (req_as_bytes[(ii*4) + 3] << 24)); 4708 4709 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 4710 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4711 failcnt++; 4712 } 4713 4714 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); 4715 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); 4716 4717 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", 4718 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); 4719 4720 /* 4721 * Wait for completion of doorbell handshake reply from the IOC 4722 */ 4723 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) 4724 failcnt++; 4725 4726 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", 4727 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); 4728 4729 /* 4730 * Copy out the cached reply... 4731 */ 4732 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) 4733 u16reply[ii] = ioc->hs_reply[ii]; 4734 } else { 4735 return -99; 4736 } 4737 4738 return -failcnt; 4739 } 4740 4741 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4742 /** 4743 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge 4744 * @ioc: Pointer to MPT_ADAPTER structure 4745 * @howlong: How long to wait (in seconds) 4746 * @sleepFlag: Specifies whether the process can sleep 4747 * 4748 * This routine waits (up to ~2 seconds max) for IOC doorbell 4749 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS 4750 * bit in its IntStatus register being clear. 4751 * 4752 * Returns a negative value on failure, else wait loop count. 4753 */ 4754 static int 4755 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4756 { 4757 int cntdn; 4758 int count = 0; 4759 u32 intstat=0; 4760 4761 cntdn = 1000 * howlong; 4762 4763 if (sleepFlag == CAN_SLEEP) { 4764 while (--cntdn) { 4765 msleep (1); 4766 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4767 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4768 break; 4769 count++; 4770 } 4771 } else { 4772 while (--cntdn) { 4773 udelay (1000); 4774 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4775 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4776 break; 4777 count++; 4778 } 4779 } 4780 4781 if (cntdn) { 4782 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", 4783 ioc->name, count)); 4784 return count; 4785 } 4786 4787 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", 4788 ioc->name, count, intstat); 4789 return -1; 4790 } 4791 4792 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4793 /** 4794 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit 4795 * @ioc: Pointer to MPT_ADAPTER structure 4796 * @howlong: How long to wait (in seconds) 4797 * @sleepFlag: Specifies whether the process can sleep 4798 * 4799 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt 4800 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. 4801 * 4802 * Returns a negative value on failure, else wait loop count. 4803 */ 4804 static int 4805 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4806 { 4807 int cntdn; 4808 int count = 0; 4809 u32 intstat=0; 4810 4811 cntdn = 1000 * howlong; 4812 if (sleepFlag == CAN_SLEEP) { 4813 while (--cntdn) { 4814 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4815 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4816 break; 4817 msleep(1); 4818 count++; 4819 } 4820 } else { 4821 while (--cntdn) { 4822 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4823 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4824 break; 4825 udelay (1000); 4826 count++; 4827 } 4828 } 4829 4830 if (cntdn) { 4831 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", 4832 ioc->name, count, howlong)); 4833 return count; 4834 } 4835 4836 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", 4837 ioc->name, count, intstat); 4838 return -1; 4839 } 4840 4841 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4842 /** 4843 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. 4844 * @ioc: Pointer to MPT_ADAPTER structure 4845 * @howlong: How long to wait (in seconds) 4846 * @sleepFlag: Specifies whether the process can sleep 4847 * 4848 * This routine polls the IOC for a handshake reply, 16 bits at a time. 4849 * Reply is cached to IOC private area large enough to hold a maximum 4850 * of 128 bytes of reply data. 4851 * 4852 * Returns a negative value on failure, else size of reply in WORDS. 4853 */ 4854 static int 4855 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4856 { 4857 int u16cnt = 0; 4858 int failcnt = 0; 4859 int t; 4860 u16 *hs_reply = ioc->hs_reply; 4861 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4862 u16 hword; 4863 4864 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; 4865 4866 /* 4867 * Get first two u16's so we can look at IOC's intended reply MsgLength 4868 */ 4869 u16cnt=0; 4870 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { 4871 failcnt++; 4872 } else { 4873 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4874 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4875 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4876 failcnt++; 4877 else { 4878 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4879 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4880 } 4881 } 4882 4883 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", 4884 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), 4885 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4886 4887 /* 4888 * If no error (and IOC said MsgLength is > 0), piece together 4889 * reply 16 bits at a time. 4890 */ 4891 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { 4892 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4893 failcnt++; 4894 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4895 /* don't overflow our IOC hs_reply[] buffer! */ 4896 if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) 4897 hs_reply[u16cnt] = hword; 4898 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4899 } 4900 4901 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4902 failcnt++; 4903 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4904 4905 if (failcnt) { 4906 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", 4907 ioc->name); 4908 return -failcnt; 4909 } 4910 #if 0 4911 else if (u16cnt != (2 * mptReply->MsgLength)) { 4912 return -101; 4913 } 4914 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 4915 return -102; 4916 } 4917 #endif 4918 4919 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); 4920 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); 4921 4922 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", 4923 ioc->name, t, u16cnt/2)); 4924 return u16cnt/2; 4925 } 4926 4927 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4928 /** 4929 * GetLanConfigPages - Fetch LANConfig pages. 4930 * @ioc: Pointer to MPT_ADAPTER structure 4931 * 4932 * Return: 0 for success 4933 * -ENOMEM if no memory available 4934 * -EPERM if not allowed due to ISR context 4935 * -EAGAIN if no msg frames currently available 4936 * -EFAULT for non-successful reply or no reply (timeout) 4937 */ 4938 static int 4939 GetLanConfigPages(MPT_ADAPTER *ioc) 4940 { 4941 ConfigPageHeader_t hdr; 4942 CONFIGPARMS cfg; 4943 LANPage0_t *ppage0_alloc; 4944 dma_addr_t page0_dma; 4945 LANPage1_t *ppage1_alloc; 4946 dma_addr_t page1_dma; 4947 int rc = 0; 4948 int data_sz; 4949 int copy_sz; 4950 4951 /* Get LAN Page 0 header */ 4952 hdr.PageVersion = 0; 4953 hdr.PageLength = 0; 4954 hdr.PageNumber = 0; 4955 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 4956 cfg.cfghdr.hdr = &hdr; 4957 cfg.physAddr = -1; 4958 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 4959 cfg.dir = 0; 4960 cfg.pageAddr = 0; 4961 cfg.timeout = 0; 4962 4963 if ((rc = mpt_config(ioc, &cfg)) != 0) 4964 return rc; 4965 4966 if (hdr.PageLength > 0) { 4967 data_sz = hdr.PageLength * 4; 4968 ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 4969 &page0_dma, GFP_KERNEL); 4970 rc = -ENOMEM; 4971 if (ppage0_alloc) { 4972 memset((u8 *)ppage0_alloc, 0, data_sz); 4973 cfg.physAddr = page0_dma; 4974 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 4975 4976 if ((rc = mpt_config(ioc, &cfg)) == 0) { 4977 /* save the data */ 4978 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); 4979 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); 4980 4981 } 4982 4983 dma_free_coherent(&ioc->pcidev->dev, data_sz, 4984 (u8 *)ppage0_alloc, page0_dma); 4985 4986 /* FIXME! 4987 * Normalize endianness of structure data, 4988 * by byte-swapping all > 1 byte fields! 4989 */ 4990 4991 } 4992 4993 if (rc) 4994 return rc; 4995 } 4996 4997 /* Get LAN Page 1 header */ 4998 hdr.PageVersion = 0; 4999 hdr.PageLength = 0; 5000 hdr.PageNumber = 1; 5001 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 5002 cfg.cfghdr.hdr = &hdr; 5003 cfg.physAddr = -1; 5004 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5005 cfg.dir = 0; 5006 cfg.pageAddr = 0; 5007 5008 if ((rc = mpt_config(ioc, &cfg)) != 0) 5009 return rc; 5010 5011 if (hdr.PageLength == 0) 5012 return 0; 5013 5014 data_sz = hdr.PageLength * 4; 5015 rc = -ENOMEM; 5016 ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 5017 &page1_dma, GFP_KERNEL); 5018 if (ppage1_alloc) { 5019 memset((u8 *)ppage1_alloc, 0, data_sz); 5020 cfg.physAddr = page1_dma; 5021 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5022 5023 if ((rc = mpt_config(ioc, &cfg)) == 0) { 5024 /* save the data */ 5025 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); 5026 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); 5027 } 5028 5029 dma_free_coherent(&ioc->pcidev->dev, data_sz, 5030 (u8 *)ppage1_alloc, page1_dma); 5031 5032 /* FIXME! 5033 * Normalize endianness of structure data, 5034 * by byte-swapping all > 1 byte fields! 5035 */ 5036 5037 } 5038 5039 return rc; 5040 } 5041 5042 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5043 /** 5044 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table 5045 * @ioc: Pointer to MPT_ADAPTER structure 5046 * @persist_opcode: see below 5047 * 5048 * =============================== ====================================== 5049 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for 5050 * devices not currently present. 5051 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings 5052 * =============================== ====================================== 5053 * 5054 * NOTE: Don't use not this function during interrupt time. 5055 * 5056 * Returns 0 for success, non-zero error 5057 */ 5058 5059 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5060 int 5061 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) 5062 { 5063 SasIoUnitControlRequest_t *sasIoUnitCntrReq; 5064 SasIoUnitControlReply_t *sasIoUnitCntrReply; 5065 MPT_FRAME_HDR *mf = NULL; 5066 MPIHeader_t *mpi_hdr; 5067 int ret = 0; 5068 unsigned long timeleft; 5069 5070 mutex_lock(&ioc->mptbase_cmds.mutex); 5071 5072 /* init the internal cmd struct */ 5073 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 5074 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 5075 5076 /* insure garbage is not sent to fw */ 5077 switch(persist_opcode) { 5078 5079 case MPI_SAS_OP_CLEAR_NOT_PRESENT: 5080 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: 5081 break; 5082 5083 default: 5084 ret = -1; 5085 goto out; 5086 } 5087 5088 printk(KERN_DEBUG "%s: persist_opcode=%x\n", 5089 __func__, persist_opcode); 5090 5091 /* Get a MF for this command. 5092 */ 5093 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 5094 printk(KERN_DEBUG "%s: no msg frames!\n", __func__); 5095 ret = -1; 5096 goto out; 5097 } 5098 5099 mpi_hdr = (MPIHeader_t *) mf; 5100 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; 5101 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); 5102 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; 5103 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; 5104 sasIoUnitCntrReq->Operation = persist_opcode; 5105 5106 mpt_put_msg_frame(mpt_base_index, ioc, mf); 5107 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); 5108 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 5109 ret = -ETIME; 5110 printk(KERN_DEBUG "%s: failed\n", __func__); 5111 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 5112 goto out; 5113 if (!timeleft) { 5114 printk(MYIOC_s_WARN_FMT 5115 "Issuing Reset from %s!!, doorbell=0x%08x\n", 5116 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 5117 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 5118 mpt_free_msg_frame(ioc, mf); 5119 } 5120 goto out; 5121 } 5122 5123 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 5124 ret = -1; 5125 goto out; 5126 } 5127 5128 sasIoUnitCntrReply = 5129 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; 5130 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { 5131 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", 5132 __func__, sasIoUnitCntrReply->IOCStatus, 5133 sasIoUnitCntrReply->IOCLogInfo); 5134 printk(KERN_DEBUG "%s: failed\n", __func__); 5135 ret = -1; 5136 } else 5137 printk(KERN_DEBUG "%s: success\n", __func__); 5138 out: 5139 5140 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 5141 mutex_unlock(&ioc->mptbase_cmds.mutex); 5142 return ret; 5143 } 5144 5145 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5146 5147 static void 5148 mptbase_raid_process_event_data(MPT_ADAPTER *ioc, 5149 MpiEventDataRaid_t * pRaidEventData) 5150 { 5151 int volume; 5152 int reason; 5153 int disk; 5154 int status; 5155 int flags; 5156 int state; 5157 5158 volume = pRaidEventData->VolumeID; 5159 reason = pRaidEventData->ReasonCode; 5160 disk = pRaidEventData->PhysDiskNum; 5161 status = le32_to_cpu(pRaidEventData->SettingsStatus); 5162 flags = (status >> 0) & 0xff; 5163 state = (status >> 8) & 0xff; 5164 5165 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { 5166 return; 5167 } 5168 5169 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && 5170 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || 5171 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { 5172 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", 5173 ioc->name, disk, volume); 5174 } else { 5175 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", 5176 ioc->name, volume); 5177 } 5178 5179 switch(reason) { 5180 case MPI_EVENT_RAID_RC_VOLUME_CREATED: 5181 printk(MYIOC_s_INFO_FMT " volume has been created\n", 5182 ioc->name); 5183 break; 5184 5185 case MPI_EVENT_RAID_RC_VOLUME_DELETED: 5186 5187 printk(MYIOC_s_INFO_FMT " volume has been deleted\n", 5188 ioc->name); 5189 break; 5190 5191 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: 5192 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", 5193 ioc->name); 5194 break; 5195 5196 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: 5197 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", 5198 ioc->name, 5199 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 5200 ? "optimal" 5201 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED 5202 ? "degraded" 5203 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED 5204 ? "failed" 5205 : "state unknown", 5206 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED 5207 ? ", enabled" : "", 5208 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 5209 ? ", quiesced" : "", 5210 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 5211 ? ", resync in progress" : "" ); 5212 break; 5213 5214 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: 5215 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", 5216 ioc->name, disk); 5217 break; 5218 5219 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: 5220 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", 5221 ioc->name); 5222 break; 5223 5224 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: 5225 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", 5226 ioc->name); 5227 break; 5228 5229 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: 5230 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", 5231 ioc->name); 5232 break; 5233 5234 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: 5235 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", 5236 ioc->name, 5237 state == MPI_PHYSDISK0_STATUS_ONLINE 5238 ? "online" 5239 : state == MPI_PHYSDISK0_STATUS_MISSING 5240 ? "missing" 5241 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 5242 ? "not compatible" 5243 : state == MPI_PHYSDISK0_STATUS_FAILED 5244 ? "failed" 5245 : state == MPI_PHYSDISK0_STATUS_INITIALIZING 5246 ? "initializing" 5247 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 5248 ? "offline requested" 5249 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 5250 ? "failed requested" 5251 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 5252 ? "offline" 5253 : "state unknown", 5254 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 5255 ? ", out of sync" : "", 5256 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 5257 ? ", quiesced" : "" ); 5258 break; 5259 5260 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: 5261 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", 5262 ioc->name, disk); 5263 break; 5264 5265 case MPI_EVENT_RAID_RC_SMART_DATA: 5266 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", 5267 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); 5268 break; 5269 5270 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: 5271 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", 5272 ioc->name, disk); 5273 break; 5274 } 5275 } 5276 5277 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5278 /** 5279 * GetIoUnitPage2 - Retrieve BIOS version and boot order information. 5280 * @ioc: Pointer to MPT_ADAPTER structure 5281 * 5282 * Returns: 0 for success 5283 * -ENOMEM if no memory available 5284 * -EPERM if not allowed due to ISR context 5285 * -EAGAIN if no msg frames currently available 5286 * -EFAULT for non-successful reply or no reply (timeout) 5287 */ 5288 static int 5289 GetIoUnitPage2(MPT_ADAPTER *ioc) 5290 { 5291 ConfigPageHeader_t hdr; 5292 CONFIGPARMS cfg; 5293 IOUnitPage2_t *ppage_alloc; 5294 dma_addr_t page_dma; 5295 int data_sz; 5296 int rc; 5297 5298 /* Get the page header */ 5299 hdr.PageVersion = 0; 5300 hdr.PageLength = 0; 5301 hdr.PageNumber = 2; 5302 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; 5303 cfg.cfghdr.hdr = &hdr; 5304 cfg.physAddr = -1; 5305 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5306 cfg.dir = 0; 5307 cfg.pageAddr = 0; 5308 cfg.timeout = 0; 5309 5310 if ((rc = mpt_config(ioc, &cfg)) != 0) 5311 return rc; 5312 5313 if (hdr.PageLength == 0) 5314 return 0; 5315 5316 /* Read the config page */ 5317 data_sz = hdr.PageLength * 4; 5318 rc = -ENOMEM; 5319 ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 5320 &page_dma, GFP_KERNEL); 5321 if (ppage_alloc) { 5322 memset((u8 *)ppage_alloc, 0, data_sz); 5323 cfg.physAddr = page_dma; 5324 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5325 5326 /* If Good, save data */ 5327 if ((rc = mpt_config(ioc, &cfg)) == 0) 5328 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); 5329 5330 dma_free_coherent(&ioc->pcidev->dev, data_sz, 5331 (u8 *)ppage_alloc, page_dma); 5332 } 5333 5334 return rc; 5335 } 5336 5337 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5338 /** 5339 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 5340 * @ioc: Pointer to a Adapter Strucutre 5341 * @portnum: IOC port number 5342 * 5343 * Return: -EFAULT if read of config page header fails 5344 * or if no nvram 5345 * If read of SCSI Port Page 0 fails, 5346 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5347 * Adapter settings: async, narrow 5348 * Return 1 5349 * If read of SCSI Port Page 2 fails, 5350 * Adapter settings valid 5351 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5352 * Return 1 5353 * Else 5354 * Both valid 5355 * Return 0 5356 * CHECK - what type of locking mechanisms should be used???? 5357 */ 5358 static int 5359 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) 5360 { 5361 u8 *pbuf; 5362 dma_addr_t buf_dma; 5363 CONFIGPARMS cfg; 5364 ConfigPageHeader_t header; 5365 int ii; 5366 int data, rc = 0; 5367 5368 /* Allocate memory 5369 */ 5370 if (!ioc->spi_data.nvram) { 5371 int sz; 5372 u8 *mem; 5373 sz = MPT_MAX_SCSI_DEVICES * sizeof(int); 5374 mem = kmalloc(sz, GFP_ATOMIC); 5375 if (mem == NULL) 5376 return -EFAULT; 5377 5378 ioc->spi_data.nvram = (int *) mem; 5379 5380 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", 5381 ioc->name, ioc->spi_data.nvram, sz)); 5382 } 5383 5384 /* Invalidate NVRAM information 5385 */ 5386 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5387 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; 5388 } 5389 5390 /* Read SPP0 header, allocate memory, then read page. 5391 */ 5392 header.PageVersion = 0; 5393 header.PageLength = 0; 5394 header.PageNumber = 0; 5395 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5396 cfg.cfghdr.hdr = &header; 5397 cfg.physAddr = -1; 5398 cfg.pageAddr = portnum; 5399 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5400 cfg.dir = 0; 5401 cfg.timeout = 0; /* use default */ 5402 if (mpt_config(ioc, &cfg) != 0) 5403 return -EFAULT; 5404 5405 if (header.PageLength > 0) { 5406 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, 5407 header.PageLength * 4, &buf_dma, 5408 GFP_KERNEL); 5409 if (pbuf) { 5410 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5411 cfg.physAddr = buf_dma; 5412 if (mpt_config(ioc, &cfg) != 0) { 5413 ioc->spi_data.maxBusWidth = MPT_NARROW; 5414 ioc->spi_data.maxSyncOffset = 0; 5415 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5416 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; 5417 rc = 1; 5418 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5419 "Unable to read PortPage0 minSyncFactor=%x\n", 5420 ioc->name, ioc->spi_data.minSyncFactor)); 5421 } else { 5422 /* Save the Port Page 0 data 5423 */ 5424 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; 5425 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); 5426 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); 5427 5428 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { 5429 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; 5430 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5431 "noQas due to Capabilities=%x\n", 5432 ioc->name, pPP0->Capabilities)); 5433 } 5434 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; 5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; 5436 if (data) { 5437 ioc->spi_data.maxSyncOffset = (u8) (data >> 16); 5438 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; 5439 ioc->spi_data.minSyncFactor = (u8) (data >> 8); 5440 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5441 "PortPage0 minSyncFactor=%x\n", 5442 ioc->name, ioc->spi_data.minSyncFactor)); 5443 } else { 5444 ioc->spi_data.maxSyncOffset = 0; 5445 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5446 } 5447 5448 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; 5449 5450 /* Update the minSyncFactor based on bus type. 5451 */ 5452 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || 5453 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { 5454 5455 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { 5456 ioc->spi_data.minSyncFactor = MPT_ULTRA; 5457 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5458 "HVD or SE detected, minSyncFactor=%x\n", 5459 ioc->name, ioc->spi_data.minSyncFactor)); 5460 } 5461 } 5462 } 5463 if (pbuf) { 5464 dma_free_coherent(&ioc->pcidev->dev, 5465 header.PageLength * 4, pbuf, 5466 buf_dma); 5467 } 5468 } 5469 } 5470 5471 /* SCSI Port Page 2 - Read the header then the page. 5472 */ 5473 header.PageVersion = 0; 5474 header.PageLength = 0; 5475 header.PageNumber = 2; 5476 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5477 cfg.cfghdr.hdr = &header; 5478 cfg.physAddr = -1; 5479 cfg.pageAddr = portnum; 5480 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5481 cfg.dir = 0; 5482 if (mpt_config(ioc, &cfg) != 0) 5483 return -EFAULT; 5484 5485 if (header.PageLength > 0) { 5486 /* Allocate memory and read SCSI Port Page 2 5487 */ 5488 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, 5489 header.PageLength * 4, &buf_dma, 5490 GFP_KERNEL); 5491 if (pbuf) { 5492 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; 5493 cfg.physAddr = buf_dma; 5494 if (mpt_config(ioc, &cfg) != 0) { 5495 /* Nvram data is left with INVALID mark 5496 */ 5497 rc = 1; 5498 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { 5499 5500 /* This is an ATTO adapter, read Page2 accordingly 5501 */ 5502 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; 5503 ATTODeviceInfo_t *pdevice = NULL; 5504 u16 ATTOFlags; 5505 5506 /* Save the Port Page 2 data 5507 * (reformat into a 32bit quantity) 5508 */ 5509 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5510 pdevice = &pPP2->DeviceSettings[ii]; 5511 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); 5512 data = 0; 5513 5514 /* Translate ATTO device flags to LSI format 5515 */ 5516 if (ATTOFlags & ATTOFLAG_DISC) 5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); 5518 if (ATTOFlags & ATTOFLAG_ID_ENB) 5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); 5520 if (ATTOFlags & ATTOFLAG_LUN_ENB) 5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); 5522 if (ATTOFlags & ATTOFLAG_TAGGED) 5523 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); 5524 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) 5525 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); 5526 5527 data = (data << 16) | (pdevice->Period << 8) | 10; 5528 ioc->spi_data.nvram[ii] = data; 5529 } 5530 } else { 5531 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; 5532 MpiDeviceInfo_t *pdevice = NULL; 5533 5534 /* 5535 * Save "Set to Avoid SCSI Bus Resets" flag 5536 */ 5537 ioc->spi_data.bus_reset = 5538 (le32_to_cpu(pPP2->PortFlags) & 5539 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? 5540 0 : 1 ; 5541 5542 /* Save the Port Page 2 data 5543 * (reformat into a 32bit quantity) 5544 */ 5545 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; 5546 ioc->spi_data.PortFlags = data; 5547 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5548 pdevice = &pPP2->DeviceSettings[ii]; 5549 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | 5550 (pdevice->SyncFactor << 8) | pdevice->Timeout; 5551 ioc->spi_data.nvram[ii] = data; 5552 } 5553 } 5554 5555 dma_free_coherent(&ioc->pcidev->dev, 5556 header.PageLength * 4, pbuf, 5557 buf_dma); 5558 } 5559 } 5560 5561 /* Update Adapter limits with those from NVRAM 5562 * Comment: Don't need to do this. Target performance 5563 * parameters will never exceed the adapters limits. 5564 */ 5565 5566 return rc; 5567 } 5568 5569 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5570 /** 5571 * mpt_readScsiDevicePageHeaders - save version and length of SDP1 5572 * @ioc: Pointer to a Adapter Strucutre 5573 * @portnum: IOC port number 5574 * 5575 * Return: -EFAULT if read of config page header fails 5576 * or 0 if success. 5577 */ 5578 static int 5579 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) 5580 { 5581 CONFIGPARMS cfg; 5582 ConfigPageHeader_t header; 5583 5584 /* Read the SCSI Device Page 1 header 5585 */ 5586 header.PageVersion = 0; 5587 header.PageLength = 0; 5588 header.PageNumber = 1; 5589 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5590 cfg.cfghdr.hdr = &header; 5591 cfg.physAddr = -1; 5592 cfg.pageAddr = portnum; 5593 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5594 cfg.dir = 0; 5595 cfg.timeout = 0; 5596 if (mpt_config(ioc, &cfg) != 0) 5597 return -EFAULT; 5598 5599 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; 5600 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; 5601 5602 header.PageVersion = 0; 5603 header.PageLength = 0; 5604 header.PageNumber = 0; 5605 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5606 if (mpt_config(ioc, &cfg) != 0) 5607 return -EFAULT; 5608 5609 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; 5610 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; 5611 5612 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", 5613 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); 5614 5615 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", 5616 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); 5617 return 0; 5618 } 5619 5620 /** 5621 * mpt_inactive_raid_list_free - This clears this link list. 5622 * @ioc : pointer to per adapter structure 5623 **/ 5624 static void 5625 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) 5626 { 5627 struct inactive_raid_component_info *component_info, *pNext; 5628 5629 if (list_empty(&ioc->raid_data.inactive_list)) 5630 return; 5631 5632 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5633 list_for_each_entry_safe(component_info, pNext, 5634 &ioc->raid_data.inactive_list, list) { 5635 list_del(&component_info->list); 5636 kfree(component_info); 5637 } 5638 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5639 } 5640 5641 /** 5642 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume 5643 * 5644 * @ioc : pointer to per adapter structure 5645 * @channel : volume channel 5646 * @id : volume target id 5647 **/ 5648 static void 5649 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) 5650 { 5651 CONFIGPARMS cfg; 5652 ConfigPageHeader_t hdr; 5653 dma_addr_t dma_handle; 5654 pRaidVolumePage0_t buffer = NULL; 5655 int i; 5656 RaidPhysDiskPage0_t phys_disk; 5657 struct inactive_raid_component_info *component_info; 5658 int handle_inactive_volumes; 5659 5660 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5661 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5662 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 5663 cfg.pageAddr = (channel << 8) + id; 5664 cfg.cfghdr.hdr = &hdr; 5665 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5666 5667 if (mpt_config(ioc, &cfg) != 0) 5668 goto out; 5669 5670 if (!hdr.PageLength) 5671 goto out; 5672 5673 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5674 &dma_handle, GFP_KERNEL); 5675 5676 if (!buffer) 5677 goto out; 5678 5679 cfg.physAddr = dma_handle; 5680 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5681 5682 if (mpt_config(ioc, &cfg) != 0) 5683 goto out; 5684 5685 if (!buffer->NumPhysDisks) 5686 goto out; 5687 5688 handle_inactive_volumes = 5689 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || 5690 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || 5691 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || 5692 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; 5693 5694 if (!handle_inactive_volumes) 5695 goto out; 5696 5697 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5698 for (i = 0; i < buffer->NumPhysDisks; i++) { 5699 if(mpt_raid_phys_disk_pg0(ioc, 5700 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 5701 continue; 5702 5703 if ((component_info = kmalloc(sizeof (*component_info), 5704 GFP_KERNEL)) == NULL) 5705 continue; 5706 5707 component_info->volumeID = id; 5708 component_info->volumeBus = channel; 5709 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; 5710 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; 5711 component_info->d.PhysDiskID = phys_disk.PhysDiskID; 5712 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; 5713 5714 list_add_tail(&component_info->list, 5715 &ioc->raid_data.inactive_list); 5716 } 5717 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5718 5719 out: 5720 if (buffer) 5721 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5722 buffer, dma_handle); 5723 } 5724 5725 /** 5726 * mpt_raid_phys_disk_pg0 - returns phys disk page zero 5727 * @ioc: Pointer to a Adapter Structure 5728 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5729 * @phys_disk: requested payload data returned 5730 * 5731 * Return: 5732 * 0 on success 5733 * -EFAULT if read of config page header fails or data pointer not NULL 5734 * -ENOMEM if pci_alloc failed 5735 **/ 5736 int 5737 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, 5738 RaidPhysDiskPage0_t *phys_disk) 5739 { 5740 CONFIGPARMS cfg; 5741 ConfigPageHeader_t hdr; 5742 dma_addr_t dma_handle; 5743 pRaidPhysDiskPage0_t buffer = NULL; 5744 int rc; 5745 5746 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5747 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5748 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); 5749 5750 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; 5751 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5752 cfg.cfghdr.hdr = &hdr; 5753 cfg.physAddr = -1; 5754 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5755 5756 if (mpt_config(ioc, &cfg) != 0) { 5757 rc = -EFAULT; 5758 goto out; 5759 } 5760 5761 if (!hdr.PageLength) { 5762 rc = -EFAULT; 5763 goto out; 5764 } 5765 5766 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5767 &dma_handle, GFP_KERNEL); 5768 5769 if (!buffer) { 5770 rc = -ENOMEM; 5771 goto out; 5772 } 5773 5774 cfg.physAddr = dma_handle; 5775 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5776 cfg.pageAddr = phys_disk_num; 5777 5778 if (mpt_config(ioc, &cfg) != 0) { 5779 rc = -EFAULT; 5780 goto out; 5781 } 5782 5783 rc = 0; 5784 memcpy(phys_disk, buffer, sizeof(*buffer)); 5785 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); 5786 5787 out: 5788 5789 if (buffer) 5790 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5791 buffer, dma_handle); 5792 5793 return rc; 5794 } 5795 5796 /** 5797 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num 5798 * @ioc: Pointer to a Adapter Structure 5799 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5800 * 5801 * Return: 5802 * returns number paths 5803 **/ 5804 int 5805 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) 5806 { 5807 CONFIGPARMS cfg; 5808 ConfigPageHeader_t hdr; 5809 dma_addr_t dma_handle; 5810 pRaidPhysDiskPage1_t buffer = NULL; 5811 int rc; 5812 5813 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5814 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5815 5816 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5817 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5818 hdr.PageNumber = 1; 5819 cfg.cfghdr.hdr = &hdr; 5820 cfg.physAddr = -1; 5821 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5822 5823 if (mpt_config(ioc, &cfg) != 0) { 5824 rc = 0; 5825 goto out; 5826 } 5827 5828 if (!hdr.PageLength) { 5829 rc = 0; 5830 goto out; 5831 } 5832 5833 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5834 &dma_handle, GFP_KERNEL); 5835 5836 if (!buffer) { 5837 rc = 0; 5838 goto out; 5839 } 5840 5841 cfg.physAddr = dma_handle; 5842 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5843 cfg.pageAddr = phys_disk_num; 5844 5845 if (mpt_config(ioc, &cfg) != 0) { 5846 rc = 0; 5847 goto out; 5848 } 5849 5850 rc = buffer->NumPhysDiskPaths; 5851 out: 5852 5853 if (buffer) 5854 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5855 buffer, dma_handle); 5856 5857 return rc; 5858 } 5859 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); 5860 5861 /** 5862 * mpt_raid_phys_disk_pg1 - returns phys disk page 1 5863 * @ioc: Pointer to a Adapter Structure 5864 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5865 * @phys_disk: requested payload data returned 5866 * 5867 * Return: 5868 * 0 on success 5869 * -EFAULT if read of config page header fails or data pointer not NULL 5870 * -ENOMEM if pci_alloc failed 5871 **/ 5872 int 5873 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, 5874 RaidPhysDiskPage1_t *phys_disk) 5875 { 5876 CONFIGPARMS cfg; 5877 ConfigPageHeader_t hdr; 5878 dma_addr_t dma_handle; 5879 pRaidPhysDiskPage1_t buffer = NULL; 5880 int rc; 5881 int i; 5882 __le64 sas_address; 5883 5884 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5885 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5886 rc = 0; 5887 5888 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5889 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5890 hdr.PageNumber = 1; 5891 cfg.cfghdr.hdr = &hdr; 5892 cfg.physAddr = -1; 5893 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5894 5895 if (mpt_config(ioc, &cfg) != 0) { 5896 rc = -EFAULT; 5897 goto out; 5898 } 5899 5900 if (!hdr.PageLength) { 5901 rc = -EFAULT; 5902 goto out; 5903 } 5904 5905 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5906 &dma_handle, GFP_KERNEL); 5907 5908 if (!buffer) { 5909 rc = -ENOMEM; 5910 goto out; 5911 } 5912 5913 cfg.physAddr = dma_handle; 5914 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5915 cfg.pageAddr = phys_disk_num; 5916 5917 if (mpt_config(ioc, &cfg) != 0) { 5918 rc = -EFAULT; 5919 goto out; 5920 } 5921 5922 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; 5923 phys_disk->PhysDiskNum = phys_disk_num; 5924 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { 5925 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; 5926 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; 5927 phys_disk->Path[i].OwnerIdentifier = 5928 buffer->Path[i].OwnerIdentifier; 5929 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); 5930 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); 5931 sas_address = le64_to_cpu(sas_address); 5932 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); 5933 memcpy(&sas_address, 5934 &buffer->Path[i].OwnerWWID, sizeof(__le64)); 5935 sas_address = le64_to_cpu(sas_address); 5936 memcpy(&phys_disk->Path[i].OwnerWWID, 5937 &sas_address, sizeof(__le64)); 5938 } 5939 5940 out: 5941 5942 if (buffer) 5943 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5944 buffer, dma_handle); 5945 5946 return rc; 5947 } 5948 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); 5949 5950 5951 /** 5952 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes 5953 * @ioc: Pointer to a Adapter Strucutre 5954 * 5955 * Return: 5956 * 0 on success 5957 * -EFAULT if read of config page header fails or data pointer not NULL 5958 * -ENOMEM if pci_alloc failed 5959 **/ 5960 int 5961 mpt_findImVolumes(MPT_ADAPTER *ioc) 5962 { 5963 IOCPage2_t *pIoc2; 5964 u8 *mem; 5965 dma_addr_t ioc2_dma; 5966 CONFIGPARMS cfg; 5967 ConfigPageHeader_t header; 5968 int rc = 0; 5969 int iocpage2sz; 5970 int i; 5971 5972 if (!ioc->ir_firmware) 5973 return 0; 5974 5975 /* Free the old page 5976 */ 5977 kfree(ioc->raid_data.pIocPg2); 5978 ioc->raid_data.pIocPg2 = NULL; 5979 mpt_inactive_raid_list_free(ioc); 5980 5981 /* Read IOCP2 header then the page. 5982 */ 5983 header.PageVersion = 0; 5984 header.PageLength = 0; 5985 header.PageNumber = 2; 5986 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 5987 cfg.cfghdr.hdr = &header; 5988 cfg.physAddr = -1; 5989 cfg.pageAddr = 0; 5990 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5991 cfg.dir = 0; 5992 cfg.timeout = 0; 5993 if (mpt_config(ioc, &cfg) != 0) 5994 return -EFAULT; 5995 5996 if (header.PageLength == 0) 5997 return -EFAULT; 5998 5999 iocpage2sz = header.PageLength * 4; 6000 pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma, 6001 GFP_KERNEL); 6002 if (!pIoc2) 6003 return -ENOMEM; 6004 6005 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6006 cfg.physAddr = ioc2_dma; 6007 if (mpt_config(ioc, &cfg) != 0) 6008 goto out; 6009 6010 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL); 6011 if (!mem) { 6012 rc = -ENOMEM; 6013 goto out; 6014 } 6015 6016 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; 6017 6018 mpt_read_ioc_pg_3(ioc); 6019 6020 for (i = 0; i < pIoc2->NumActiveVolumes ; i++) 6021 mpt_inactive_raid_volumes(ioc, 6022 pIoc2->RaidVolume[i].VolumeBus, 6023 pIoc2->RaidVolume[i].VolumeID); 6024 6025 out: 6026 dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma); 6027 6028 return rc; 6029 } 6030 6031 static int 6032 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) 6033 { 6034 IOCPage3_t *pIoc3; 6035 u8 *mem; 6036 CONFIGPARMS cfg; 6037 ConfigPageHeader_t header; 6038 dma_addr_t ioc3_dma; 6039 int iocpage3sz = 0; 6040 6041 /* Free the old page 6042 */ 6043 kfree(ioc->raid_data.pIocPg3); 6044 ioc->raid_data.pIocPg3 = NULL; 6045 6046 /* There is at least one physical disk. 6047 * Read and save IOC Page 3 6048 */ 6049 header.PageVersion = 0; 6050 header.PageLength = 0; 6051 header.PageNumber = 3; 6052 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6053 cfg.cfghdr.hdr = &header; 6054 cfg.physAddr = -1; 6055 cfg.pageAddr = 0; 6056 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6057 cfg.dir = 0; 6058 cfg.timeout = 0; 6059 if (mpt_config(ioc, &cfg) != 0) 6060 return 0; 6061 6062 if (header.PageLength == 0) 6063 return 0; 6064 6065 /* Read Header good, alloc memory 6066 */ 6067 iocpage3sz = header.PageLength * 4; 6068 pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma, 6069 GFP_KERNEL); 6070 if (!pIoc3) 6071 return 0; 6072 6073 /* Read the Page and save the data 6074 * into malloc'd memory. 6075 */ 6076 cfg.physAddr = ioc3_dma; 6077 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6078 if (mpt_config(ioc, &cfg) == 0) { 6079 mem = kmalloc(iocpage3sz, GFP_KERNEL); 6080 if (mem) { 6081 memcpy(mem, (u8 *)pIoc3, iocpage3sz); 6082 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; 6083 } 6084 } 6085 6086 dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma); 6087 6088 return 0; 6089 } 6090 6091 static void 6092 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) 6093 { 6094 IOCPage4_t *pIoc4; 6095 CONFIGPARMS cfg; 6096 ConfigPageHeader_t header; 6097 dma_addr_t ioc4_dma; 6098 int iocpage4sz; 6099 6100 /* Read and save IOC Page 4 6101 */ 6102 header.PageVersion = 0; 6103 header.PageLength = 0; 6104 header.PageNumber = 4; 6105 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6106 cfg.cfghdr.hdr = &header; 6107 cfg.physAddr = -1; 6108 cfg.pageAddr = 0; 6109 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6110 cfg.dir = 0; 6111 cfg.timeout = 0; 6112 if (mpt_config(ioc, &cfg) != 0) 6113 return; 6114 6115 if (header.PageLength == 0) 6116 return; 6117 6118 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { 6119 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ 6120 pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz, 6121 &ioc4_dma, GFP_KERNEL); 6122 if (!pIoc4) 6123 return; 6124 ioc->alloc_total += iocpage4sz; 6125 } else { 6126 ioc4_dma = ioc->spi_data.IocPg4_dma; 6127 iocpage4sz = ioc->spi_data.IocPg4Sz; 6128 } 6129 6130 /* Read the Page into dma memory. 6131 */ 6132 cfg.physAddr = ioc4_dma; 6133 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6134 if (mpt_config(ioc, &cfg) == 0) { 6135 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; 6136 ioc->spi_data.IocPg4_dma = ioc4_dma; 6137 ioc->spi_data.IocPg4Sz = iocpage4sz; 6138 } else { 6139 dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4, 6140 ioc4_dma); 6141 ioc->spi_data.pIocPg4 = NULL; 6142 ioc->alloc_total -= iocpage4sz; 6143 } 6144 } 6145 6146 static void 6147 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) 6148 { 6149 IOCPage1_t *pIoc1; 6150 CONFIGPARMS cfg; 6151 ConfigPageHeader_t header; 6152 dma_addr_t ioc1_dma; 6153 int iocpage1sz = 0; 6154 u32 tmp; 6155 6156 /* Check the Coalescing Timeout in IOC Page 1 6157 */ 6158 header.PageVersion = 0; 6159 header.PageLength = 0; 6160 header.PageNumber = 1; 6161 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6162 cfg.cfghdr.hdr = &header; 6163 cfg.physAddr = -1; 6164 cfg.pageAddr = 0; 6165 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6166 cfg.dir = 0; 6167 cfg.timeout = 0; 6168 if (mpt_config(ioc, &cfg) != 0) 6169 return; 6170 6171 if (header.PageLength == 0) 6172 return; 6173 6174 /* Read Header good, alloc memory 6175 */ 6176 iocpage1sz = header.PageLength * 4; 6177 pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma, 6178 GFP_KERNEL); 6179 if (!pIoc1) 6180 return; 6181 6182 /* Read the Page and check coalescing timeout 6183 */ 6184 cfg.physAddr = ioc1_dma; 6185 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6186 if (mpt_config(ioc, &cfg) == 0) { 6187 6188 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; 6189 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { 6190 tmp = le32_to_cpu(pIoc1->CoalescingTimeout); 6191 6192 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", 6193 ioc->name, tmp)); 6194 6195 if (tmp > MPT_COALESCING_TIMEOUT) { 6196 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); 6197 6198 /* Write NVRAM and current 6199 */ 6200 cfg.dir = 1; 6201 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 6202 if (mpt_config(ioc, &cfg) == 0) { 6203 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", 6204 ioc->name, MPT_COALESCING_TIMEOUT)); 6205 6206 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; 6207 if (mpt_config(ioc, &cfg) == 0) { 6208 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6209 "Reset NVRAM Coalescing Timeout to = %d\n", 6210 ioc->name, MPT_COALESCING_TIMEOUT)); 6211 } else { 6212 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6213 "Reset NVRAM Coalescing Timeout Failed\n", 6214 ioc->name)); 6215 } 6216 6217 } else { 6218 dprintk(ioc, printk(MYIOC_s_WARN_FMT 6219 "Reset of Current Coalescing Timeout Failed!\n", 6220 ioc->name)); 6221 } 6222 } 6223 6224 } else { 6225 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); 6226 } 6227 } 6228 6229 dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma); 6230 6231 return; 6232 } 6233 6234 static void 6235 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) 6236 { 6237 CONFIGPARMS cfg; 6238 ConfigPageHeader_t hdr; 6239 dma_addr_t buf_dma; 6240 ManufacturingPage0_t *pbuf = NULL; 6241 6242 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 6243 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 6244 6245 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 6246 cfg.cfghdr.hdr = &hdr; 6247 cfg.physAddr = -1; 6248 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6249 cfg.timeout = 10; 6250 6251 if (mpt_config(ioc, &cfg) != 0) 6252 goto out; 6253 6254 if (!cfg.cfghdr.hdr->PageLength) 6255 goto out; 6256 6257 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6258 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 6259 &buf_dma, GFP_KERNEL); 6260 if (!pbuf) 6261 goto out; 6262 6263 cfg.physAddr = buf_dma; 6264 6265 if (mpt_config(ioc, &cfg) != 0) 6266 goto out; 6267 6268 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); 6269 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); 6270 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); 6271 6272 out: 6273 6274 if (pbuf) 6275 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf, 6276 buf_dma); 6277 } 6278 6279 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6280 /** 6281 * SendEventNotification - Send EventNotification (on or off) request to adapter 6282 * @ioc: Pointer to MPT_ADAPTER structure 6283 * @EvSwitch: Event switch flags 6284 * @sleepFlag: Specifies whether the process can sleep 6285 */ 6286 static int 6287 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) 6288 { 6289 EventNotification_t evn; 6290 MPIDefaultReply_t reply_buf; 6291 6292 memset(&evn, 0, sizeof(EventNotification_t)); 6293 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); 6294 6295 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; 6296 evn.Switch = EvSwitch; 6297 evn.MsgContext = cpu_to_le32(mpt_base_index << 16); 6298 6299 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6300 "Sending EventNotification (%d) request %p\n", 6301 ioc->name, EvSwitch, &evn)); 6302 6303 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), 6304 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, 6305 sleepFlag); 6306 } 6307 6308 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6309 /** 6310 * SendEventAck - Send EventAck request to MPT adapter. 6311 * @ioc: Pointer to MPT_ADAPTER structure 6312 * @evnp: Pointer to original EventNotification request 6313 */ 6314 static int 6315 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) 6316 { 6317 EventAck_t *pAck; 6318 6319 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6320 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", 6321 ioc->name, __func__)); 6322 return -1; 6323 } 6324 6325 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); 6326 6327 pAck->Function = MPI_FUNCTION_EVENT_ACK; 6328 pAck->ChainOffset = 0; 6329 pAck->Reserved[0] = pAck->Reserved[1] = 0; 6330 pAck->MsgFlags = 0; 6331 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; 6332 pAck->Event = evnp->Event; 6333 pAck->EventContext = evnp->EventContext; 6334 6335 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); 6336 6337 return 0; 6338 } 6339 6340 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6341 /** 6342 * mpt_config - Generic function to issue config message 6343 * @ioc: Pointer to an adapter structure 6344 * @pCfg: Pointer to a configuration structure. Struct contains 6345 * action, page address, direction, physical address 6346 * and pointer to a configuration page header 6347 * Page header is updated. 6348 * 6349 * Returns 0 for success 6350 * -EAGAIN if no msg frames currently available 6351 * -EFAULT for non-successful reply or no reply (timeout) 6352 */ 6353 int 6354 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) 6355 { 6356 Config_t *pReq; 6357 ConfigReply_t *pReply; 6358 ConfigExtendedPageHeader_t *pExtHdr = NULL; 6359 MPT_FRAME_HDR *mf; 6360 int ii; 6361 int flagsLength; 6362 long timeout; 6363 int ret; 6364 u8 page_type = 0, extend_page; 6365 unsigned long timeleft; 6366 unsigned long flags; 6367 u8 issue_hard_reset = 0; 6368 u8 retry_count = 0; 6369 6370 might_sleep(); 6371 6372 /* don't send a config page during diag reset */ 6373 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6374 if (ioc->ioc_reset_in_progress) { 6375 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6376 "%s: busy with host reset\n", ioc->name, __func__)); 6377 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6378 return -EBUSY; 6379 } 6380 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6381 6382 /* don't send if no chance of success */ 6383 if (!ioc->active || 6384 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { 6385 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6386 "%s: ioc not operational, %d, %xh\n", 6387 ioc->name, __func__, ioc->active, 6388 mpt_GetIocState(ioc, 0))); 6389 return -EFAULT; 6390 } 6391 6392 retry_config: 6393 mutex_lock(&ioc->mptbase_cmds.mutex); 6394 /* init the internal cmd struct */ 6395 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 6396 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 6397 6398 /* Get and Populate a free Frame 6399 */ 6400 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6401 dcprintk(ioc, printk(MYIOC_s_WARN_FMT 6402 "mpt_config: no msg frames!\n", ioc->name)); 6403 ret = -EAGAIN; 6404 goto out; 6405 } 6406 6407 pReq = (Config_t *)mf; 6408 pReq->Action = pCfg->action; 6409 pReq->Reserved = 0; 6410 pReq->ChainOffset = 0; 6411 pReq->Function = MPI_FUNCTION_CONFIG; 6412 6413 /* Assume page type is not extended and clear "reserved" fields. */ 6414 pReq->ExtPageLength = 0; 6415 pReq->ExtPageType = 0; 6416 pReq->MsgFlags = 0; 6417 6418 for (ii=0; ii < 8; ii++) 6419 pReq->Reserved2[ii] = 0; 6420 6421 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; 6422 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; 6423 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; 6424 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); 6425 6426 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { 6427 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; 6428 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); 6429 pReq->ExtPageType = pExtHdr->ExtPageType; 6430 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 6431 6432 /* Page Length must be treated as a reserved field for the 6433 * extended header. 6434 */ 6435 pReq->Header.PageLength = 0; 6436 } 6437 6438 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); 6439 6440 /* Add a SGE to the config request. 6441 */ 6442 if (pCfg->dir) 6443 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 6444 else 6445 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 6446 6447 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == 6448 MPI_CONFIG_PAGETYPE_EXTENDED) { 6449 flagsLength |= pExtHdr->ExtPageLength * 4; 6450 page_type = pReq->ExtPageType; 6451 extend_page = 1; 6452 } else { 6453 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; 6454 page_type = pReq->Header.PageType; 6455 extend_page = 0; 6456 } 6457 6458 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6459 "Sending Config request type 0x%x, page 0x%x and action %d\n", 6460 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); 6461 6462 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); 6463 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; 6464 mpt_put_msg_frame(mpt_base_index, ioc, mf); 6465 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 6466 timeout); 6467 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 6468 ret = -ETIME; 6469 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6470 "Failed Sending Config request type 0x%x, page 0x%x," 6471 " action %d, status %xh, time left %ld\n\n", 6472 ioc->name, page_type, pReq->Header.PageNumber, 6473 pReq->Action, ioc->mptbase_cmds.status, timeleft)); 6474 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 6475 goto out; 6476 if (!timeleft) { 6477 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6478 if (ioc->ioc_reset_in_progress) { 6479 spin_unlock_irqrestore(&ioc->taskmgmt_lock, 6480 flags); 6481 printk(MYIOC_s_INFO_FMT "%s: host reset in" 6482 " progress mpt_config timed out.!!\n", 6483 __func__, ioc->name); 6484 mutex_unlock(&ioc->mptbase_cmds.mutex); 6485 return -EFAULT; 6486 } 6487 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6488 issue_hard_reset = 1; 6489 } 6490 goto out; 6491 } 6492 6493 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 6494 ret = -1; 6495 goto out; 6496 } 6497 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; 6498 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 6499 if (ret == MPI_IOCSTATUS_SUCCESS) { 6500 if (extend_page) { 6501 pCfg->cfghdr.ehdr->ExtPageLength = 6502 le16_to_cpu(pReply->ExtPageLength); 6503 pCfg->cfghdr.ehdr->ExtPageType = 6504 pReply->ExtPageType; 6505 } 6506 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; 6507 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; 6508 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; 6509 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; 6510 6511 } 6512 6513 if (retry_count) 6514 printk(MYIOC_s_INFO_FMT "Retry completed " 6515 "ret=0x%x timeleft=%ld\n", 6516 ioc->name, ret, timeleft); 6517 6518 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", 6519 ret, le32_to_cpu(pReply->IOCLogInfo))); 6520 6521 out: 6522 6523 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 6524 mutex_unlock(&ioc->mptbase_cmds.mutex); 6525 if (issue_hard_reset) { 6526 issue_hard_reset = 0; 6527 printk(MYIOC_s_WARN_FMT 6528 "Issuing Reset from %s!!, doorbell=0x%08x\n", 6529 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 6530 if (retry_count == 0) { 6531 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) 6532 retry_count++; 6533 } else 6534 mpt_HardResetHandler(ioc, CAN_SLEEP); 6535 6536 mpt_free_msg_frame(ioc, mf); 6537 /* attempt one retry for a timed out command */ 6538 if (retry_count < 2) { 6539 printk(MYIOC_s_INFO_FMT 6540 "Attempting Retry Config request" 6541 " type 0x%x, page 0x%x," 6542 " action %d\n", ioc->name, page_type, 6543 pCfg->cfghdr.hdr->PageNumber, pCfg->action); 6544 retry_count++; 6545 goto retry_config; 6546 } 6547 } 6548 return ret; 6549 6550 } 6551 6552 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6553 /** 6554 * mpt_ioc_reset - Base cleanup for hard reset 6555 * @ioc: Pointer to the adapter structure 6556 * @reset_phase: Indicates pre- or post-reset functionality 6557 * 6558 * Remark: Frees resources with internally generated commands. 6559 */ 6560 static int 6561 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 6562 { 6563 switch (reset_phase) { 6564 case MPT_IOC_SETUP_RESET: 6565 ioc->taskmgmt_quiesce_io = 1; 6566 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6567 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 6568 break; 6569 case MPT_IOC_PRE_RESET: 6570 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6571 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 6572 break; 6573 case MPT_IOC_POST_RESET: 6574 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6575 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 6576 /* wake up mptbase_cmds */ 6577 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 6578 ioc->mptbase_cmds.status |= 6579 MPT_MGMT_STATUS_DID_IOCRESET; 6580 complete(&ioc->mptbase_cmds.done); 6581 } 6582 /* wake up taskmgmt_cmds */ 6583 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 6584 ioc->taskmgmt_cmds.status |= 6585 MPT_MGMT_STATUS_DID_IOCRESET; 6586 complete(&ioc->taskmgmt_cmds.done); 6587 } 6588 break; 6589 default: 6590 break; 6591 } 6592 6593 return 1; /* currently means nothing really */ 6594 } 6595 6596 6597 #ifdef CONFIG_PROC_FS /* { */ 6598 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6599 /* 6600 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... 6601 */ 6602 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6603 /** 6604 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. 6605 * 6606 * Returns 0 for success, non-zero for failure. 6607 */ 6608 static int 6609 procmpt_create(void) 6610 { 6611 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); 6612 if (mpt_proc_root_dir == NULL) 6613 return -ENOTDIR; 6614 6615 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir, 6616 mpt_summary_proc_show); 6617 proc_create_single("version", S_IRUGO, mpt_proc_root_dir, 6618 mpt_version_proc_show); 6619 return 0; 6620 } 6621 6622 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6623 /** 6624 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. 6625 * 6626 * Returns 0 for success, non-zero for failure. 6627 */ 6628 static void 6629 procmpt_destroy(void) 6630 { 6631 remove_proc_entry("version", mpt_proc_root_dir); 6632 remove_proc_entry("summary", mpt_proc_root_dir); 6633 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); 6634 } 6635 6636 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6637 /* 6638 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. 6639 */ 6640 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); 6641 6642 static int mpt_summary_proc_show(struct seq_file *m, void *v) 6643 { 6644 MPT_ADAPTER *ioc = m->private; 6645 6646 if (ioc) { 6647 seq_mpt_print_ioc_summary(ioc, m, 1); 6648 } else { 6649 list_for_each_entry(ioc, &ioc_list, list) { 6650 seq_mpt_print_ioc_summary(ioc, m, 1); 6651 } 6652 } 6653 6654 return 0; 6655 } 6656 6657 static int mpt_version_proc_show(struct seq_file *m, void *v) 6658 { 6659 u8 cb_idx; 6660 int scsi, fc, sas, lan, ctl, targ; 6661 char *drvname; 6662 6663 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); 6664 seq_printf(m, " Fusion MPT base driver\n"); 6665 6666 scsi = fc = sas = lan = ctl = targ = 0; 6667 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 6668 drvname = NULL; 6669 if (MptCallbacks[cb_idx]) { 6670 switch (MptDriverClass[cb_idx]) { 6671 case MPTSPI_DRIVER: 6672 if (!scsi++) drvname = "SPI host"; 6673 break; 6674 case MPTFC_DRIVER: 6675 if (!fc++) drvname = "FC host"; 6676 break; 6677 case MPTSAS_DRIVER: 6678 if (!sas++) drvname = "SAS host"; 6679 break; 6680 case MPTLAN_DRIVER: 6681 if (!lan++) drvname = "LAN"; 6682 break; 6683 case MPTSTM_DRIVER: 6684 if (!targ++) drvname = "SCSI target"; 6685 break; 6686 case MPTCTL_DRIVER: 6687 if (!ctl++) drvname = "ioctl"; 6688 break; 6689 } 6690 6691 if (drvname) 6692 seq_printf(m, " Fusion MPT %s driver\n", drvname); 6693 } 6694 } 6695 6696 return 0; 6697 } 6698 6699 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) 6700 { 6701 MPT_ADAPTER *ioc = m->private; 6702 char expVer[32]; 6703 int sz; 6704 int p; 6705 6706 mpt_get_fw_exp_ver(expVer, ioc); 6707 6708 seq_printf(m, "%s:", ioc->name); 6709 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 6710 seq_printf(m, " (f/w download boot flag set)"); 6711 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) 6712 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); 6713 6714 seq_printf(m, "\n ProductID = 0x%04x (%s)\n", 6715 ioc->facts.ProductID, 6716 ioc->prod_name); 6717 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); 6718 if (ioc->facts.FWImageSize) 6719 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); 6720 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); 6721 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); 6722 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); 6723 6724 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", 6725 ioc->facts.CurrentHostMfaHighAddr); 6726 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", 6727 ioc->facts.CurrentSenseBufferHighAddr); 6728 6729 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); 6730 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); 6731 6732 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", 6733 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); 6734 /* 6735 * Rounding UP to nearest 4-kB boundary here... 6736 */ 6737 sz = (ioc->req_sz * ioc->req_depth) + 128; 6738 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; 6739 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", 6740 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); 6741 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", 6742 4*ioc->facts.RequestFrameSize, 6743 ioc->facts.GlobalCredits); 6744 6745 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", 6746 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); 6747 sz = (ioc->reply_sz * ioc->reply_depth) + 128; 6748 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", 6749 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); 6750 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", 6751 ioc->facts.CurReplyFrameSize, 6752 ioc->facts.ReplyQueueDepth); 6753 6754 seq_printf(m, " MaxDevices = %d\n", 6755 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); 6756 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); 6757 6758 /* per-port info */ 6759 for (p=0; p < ioc->facts.NumberOfPorts; p++) { 6760 seq_printf(m, " PortNumber = %d (of %d)\n", 6761 p+1, 6762 ioc->facts.NumberOfPorts); 6763 if (ioc->bus_type == FC) { 6764 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 6765 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6766 seq_printf(m, " LanAddr = %pMR\n", a); 6767 } 6768 seq_printf(m, " WWN = %08X%08X:%08X%08X\n", 6769 ioc->fc_port_page0[p].WWNN.High, 6770 ioc->fc_port_page0[p].WWNN.Low, 6771 ioc->fc_port_page0[p].WWPN.High, 6772 ioc->fc_port_page0[p].WWPN.Low); 6773 } 6774 } 6775 6776 return 0; 6777 } 6778 #endif /* CONFIG_PROC_FS } */ 6779 6780 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6781 static void 6782 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) 6783 { 6784 buf[0] ='\0'; 6785 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { 6786 sprintf(buf, " (Exp %02d%02d)", 6787 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ 6788 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ 6789 6790 /* insider hack! */ 6791 if ((ioc->facts.FWVersion.Word >> 8) & 0x80) 6792 strcat(buf, " [MDBG]"); 6793 } 6794 } 6795 6796 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6797 /** 6798 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. 6799 * @ioc: Pointer to MPT_ADAPTER structure 6800 * @buffer: Pointer to buffer where IOC summary info should be written 6801 * @size: Pointer to number of bytes we wrote (set by this routine) 6802 * @len: Offset at which to start writing in buffer 6803 * @showlan: Display LAN stuff? 6804 * 6805 * This routine writes (english readable) ASCII text, which represents 6806 * a summary of IOC information, to a buffer. 6807 */ 6808 void 6809 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) 6810 { 6811 char expVer[32]; 6812 int y; 6813 6814 mpt_get_fw_exp_ver(expVer, ioc); 6815 6816 /* 6817 * Shorter summary of attached ioc's... 6818 */ 6819 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6820 ioc->name, 6821 ioc->prod_name, 6822 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6823 ioc->facts.FWVersion.Word, 6824 expVer, 6825 ioc->facts.NumberOfPorts, 6826 ioc->req_depth); 6827 6828 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6829 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6830 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a); 6831 } 6832 6833 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); 6834 6835 if (!ioc->active) 6836 y += sprintf(buffer+len+y, " (disabled)"); 6837 6838 y += sprintf(buffer+len+y, "\n"); 6839 6840 *size = y; 6841 } 6842 6843 #ifdef CONFIG_PROC_FS 6844 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) 6845 { 6846 char expVer[32]; 6847 6848 mpt_get_fw_exp_ver(expVer, ioc); 6849 6850 /* 6851 * Shorter summary of attached ioc's... 6852 */ 6853 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6854 ioc->name, 6855 ioc->prod_name, 6856 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6857 ioc->facts.FWVersion.Word, 6858 expVer, 6859 ioc->facts.NumberOfPorts, 6860 ioc->req_depth); 6861 6862 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6863 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6864 seq_printf(m, ", LanAddr=%pMR", a); 6865 } 6866 6867 seq_printf(m, ", IRQ=%d", ioc->pci_irq); 6868 6869 if (!ioc->active) 6870 seq_printf(m, " (disabled)"); 6871 6872 seq_putc(m, '\n'); 6873 } 6874 #endif 6875 6876 /** 6877 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management 6878 * @ioc: Pointer to MPT_ADAPTER structure 6879 * 6880 * Returns 0 for SUCCESS or -1 if FAILED. 6881 * 6882 * If -1 is return, then it was not possible to set the flags 6883 **/ 6884 int 6885 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6886 { 6887 unsigned long flags; 6888 int retval; 6889 6890 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6891 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || 6892 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { 6893 retval = -1; 6894 goto out; 6895 } 6896 retval = 0; 6897 ioc->taskmgmt_in_progress = 1; 6898 ioc->taskmgmt_quiesce_io = 1; 6899 if (ioc->alt_ioc) { 6900 ioc->alt_ioc->taskmgmt_in_progress = 1; 6901 ioc->alt_ioc->taskmgmt_quiesce_io = 1; 6902 } 6903 out: 6904 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6905 return retval; 6906 } 6907 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); 6908 6909 /** 6910 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management 6911 * @ioc: Pointer to MPT_ADAPTER structure 6912 * 6913 **/ 6914 void 6915 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6916 { 6917 unsigned long flags; 6918 6919 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6920 ioc->taskmgmt_in_progress = 0; 6921 ioc->taskmgmt_quiesce_io = 0; 6922 if (ioc->alt_ioc) { 6923 ioc->alt_ioc->taskmgmt_in_progress = 0; 6924 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 6925 } 6926 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6927 } 6928 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); 6929 6930 6931 /** 6932 * mpt_halt_firmware - Halts the firmware if it is operational and panic 6933 * the kernel 6934 * @ioc: Pointer to MPT_ADAPTER structure 6935 * 6936 **/ 6937 void __noreturn 6938 mpt_halt_firmware(MPT_ADAPTER *ioc) 6939 { 6940 u32 ioc_raw_state; 6941 6942 ioc_raw_state = mpt_GetIocState(ioc, 0); 6943 6944 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 6945 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", 6946 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6947 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, 6948 ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6949 } else { 6950 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); 6951 panic("%s: Firmware is halted due to command timeout\n", 6952 ioc->name); 6953 } 6954 } 6955 EXPORT_SYMBOL(mpt_halt_firmware); 6956 6957 /** 6958 * mpt_SoftResetHandler - Issues a less expensive reset 6959 * @ioc: Pointer to MPT_ADAPTER structure 6960 * @sleepFlag: Indicates if sleep or schedule must be called. 6961 * 6962 * Returns 0 for SUCCESS or -1 if FAILED. 6963 * 6964 * Message Unit Reset - instructs the IOC to reset the Reply Post and 6965 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. 6966 * All posted buffers are freed, and event notification is turned off. 6967 * IOC doesn't reply to any outstanding request. This will transfer IOC 6968 * to READY state. 6969 **/ 6970 static int 6971 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 6972 { 6973 int rc; 6974 int ii; 6975 u8 cb_idx; 6976 unsigned long flags; 6977 u32 ioc_state; 6978 unsigned long time_count; 6979 6980 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", 6981 ioc->name)); 6982 6983 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 6984 6985 if (mpt_fwfault_debug) 6986 mpt_halt_firmware(ioc); 6987 6988 if (ioc_state == MPI_IOC_STATE_FAULT || 6989 ioc_state == MPI_IOC_STATE_RESET) { 6990 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6991 "skipping, either in FAULT or RESET state!\n", ioc->name)); 6992 return -1; 6993 } 6994 6995 if (ioc->bus_type == FC) { 6996 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6997 "skipping, because the bus type is FC!\n", ioc->name)); 6998 return -1; 6999 } 7000 7001 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7002 if (ioc->ioc_reset_in_progress) { 7003 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7004 return -1; 7005 } 7006 ioc->ioc_reset_in_progress = 1; 7007 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7008 7009 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7010 if (MptResetHandlers[cb_idx]) 7011 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7012 } 7013 7014 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7015 if (ioc->taskmgmt_in_progress) { 7016 ioc->ioc_reset_in_progress = 0; 7017 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7018 return -1; 7019 } 7020 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7021 /* Disable reply interrupts (also blocks FreeQ) */ 7022 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 7023 ioc->active = 0; 7024 time_count = jiffies; 7025 7026 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 7027 7028 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7029 if (MptResetHandlers[cb_idx]) 7030 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); 7031 } 7032 7033 if (rc) 7034 goto out; 7035 7036 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7037 if (ioc_state != MPI_IOC_STATE_READY) 7038 goto out; 7039 7040 for (ii = 0; ii < 5; ii++) { 7041 /* Get IOC facts! Allow 5 retries */ 7042 rc = GetIocFacts(ioc, sleepFlag, 7043 MPT_HOSTEVENT_IOC_RECOVER); 7044 if (rc == 0) 7045 break; 7046 if (sleepFlag == CAN_SLEEP) 7047 msleep(100); 7048 else 7049 mdelay(100); 7050 } 7051 if (ii == 5) 7052 goto out; 7053 7054 rc = PrimeIocFifos(ioc); 7055 if (rc != 0) 7056 goto out; 7057 7058 rc = SendIocInit(ioc, sleepFlag); 7059 if (rc != 0) 7060 goto out; 7061 7062 rc = SendEventNotification(ioc, 1, sleepFlag); 7063 if (rc != 0) 7064 goto out; 7065 7066 if (ioc->hard_resets < -1) 7067 ioc->hard_resets++; 7068 7069 /* 7070 * At this point, we know soft reset succeeded. 7071 */ 7072 7073 ioc->active = 1; 7074 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 7075 7076 out: 7077 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7078 ioc->ioc_reset_in_progress = 0; 7079 ioc->taskmgmt_quiesce_io = 0; 7080 ioc->taskmgmt_in_progress = 0; 7081 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7082 7083 if (ioc->active) { /* otherwise, hard reset coming */ 7084 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7085 if (MptResetHandlers[cb_idx]) 7086 mpt_signal_reset(cb_idx, ioc, 7087 MPT_IOC_POST_RESET); 7088 } 7089 } 7090 7091 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7092 "SoftResetHandler: completed (%d seconds): %s\n", 7093 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, 7094 ((rc == 0) ? "SUCCESS" : "FAILED"))); 7095 7096 return rc; 7097 } 7098 7099 /** 7100 * mpt_Soft_Hard_ResetHandler - Try less expensive reset 7101 * @ioc: Pointer to MPT_ADAPTER structure 7102 * @sleepFlag: Indicates if sleep or schedule must be called. 7103 * 7104 * Returns 0 for SUCCESS or -1 if FAILED. 7105 * Try for softreset first, only if it fails go for expensive 7106 * HardReset. 7107 **/ 7108 int 7109 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { 7110 int ret = -1; 7111 7112 ret = mpt_SoftResetHandler(ioc, sleepFlag); 7113 if (ret == 0) 7114 return ret; 7115 ret = mpt_HardResetHandler(ioc, sleepFlag); 7116 return ret; 7117 } 7118 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); 7119 7120 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7121 /* 7122 * Reset Handling 7123 */ 7124 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7125 /** 7126 * mpt_HardResetHandler - Generic reset handler 7127 * @ioc: Pointer to MPT_ADAPTER structure 7128 * @sleepFlag: Indicates if sleep or schedule must be called. 7129 * 7130 * Issues SCSI Task Management call based on input arg values. 7131 * If TaskMgmt fails, returns associated SCSI request. 7132 * 7133 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 7134 * or a non-interrupt thread. In the former, must not call schedule(). 7135 * 7136 * Note: A return of -1 is a FATAL error case, as it means a 7137 * FW reload/initialization failed. 7138 * 7139 * Returns 0 for SUCCESS or -1 if FAILED. 7140 */ 7141 int 7142 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7143 { 7144 int rc; 7145 u8 cb_idx; 7146 unsigned long flags; 7147 unsigned long time_count; 7148 7149 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); 7150 #ifdef MFCNT 7151 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); 7152 printk("MF count 0x%x !\n", ioc->mfcnt); 7153 #endif 7154 if (mpt_fwfault_debug) 7155 mpt_halt_firmware(ioc); 7156 7157 /* Reset the adapter. Prevent more than 1 call to 7158 * mpt_do_ioc_recovery at any instant in time. 7159 */ 7160 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7161 if (ioc->ioc_reset_in_progress) { 7162 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7163 ioc->wait_on_reset_completion = 1; 7164 do { 7165 ssleep(1); 7166 } while (ioc->ioc_reset_in_progress == 1); 7167 ioc->wait_on_reset_completion = 0; 7168 return ioc->reset_status; 7169 } 7170 if (ioc->wait_on_reset_completion) { 7171 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7172 rc = 0; 7173 time_count = jiffies; 7174 goto exit; 7175 } 7176 ioc->ioc_reset_in_progress = 1; 7177 if (ioc->alt_ioc) 7178 ioc->alt_ioc->ioc_reset_in_progress = 1; 7179 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7180 7181 7182 /* The SCSI driver needs to adjust timeouts on all current 7183 * commands prior to the diagnostic reset being issued. 7184 * Prevents timeouts occurring during a diagnostic reset...very bad. 7185 * For all other protocol drivers, this is a no-op. 7186 */ 7187 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7188 if (MptResetHandlers[cb_idx]) { 7189 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7190 if (ioc->alt_ioc) 7191 mpt_signal_reset(cb_idx, ioc->alt_ioc, 7192 MPT_IOC_SETUP_RESET); 7193 } 7194 } 7195 7196 time_count = jiffies; 7197 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); 7198 if (rc != 0) { 7199 printk(KERN_WARNING MYNAM 7200 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", 7201 rc, ioc->name, mpt_GetIocState(ioc, 0)); 7202 } else { 7203 if (ioc->hard_resets < -1) 7204 ioc->hard_resets++; 7205 } 7206 7207 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7208 ioc->ioc_reset_in_progress = 0; 7209 ioc->taskmgmt_quiesce_io = 0; 7210 ioc->taskmgmt_in_progress = 0; 7211 ioc->reset_status = rc; 7212 if (ioc->alt_ioc) { 7213 ioc->alt_ioc->ioc_reset_in_progress = 0; 7214 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 7215 ioc->alt_ioc->taskmgmt_in_progress = 0; 7216 } 7217 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7218 7219 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7220 if (MptResetHandlers[cb_idx]) { 7221 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); 7222 if (ioc->alt_ioc) 7223 mpt_signal_reset(cb_idx, 7224 ioc->alt_ioc, MPT_IOC_POST_RESET); 7225 } 7226 } 7227 exit: 7228 dtmprintk(ioc, 7229 printk(MYIOC_s_DEBUG_FMT 7230 "HardResetHandler: completed (%d seconds): %s\n", ioc->name, 7231 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? 7232 "SUCCESS" : "FAILED"))); 7233 7234 return rc; 7235 } 7236 7237 #ifdef CONFIG_FUSION_LOGGING 7238 static void 7239 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) 7240 { 7241 char *ds = NULL; 7242 u32 evData0; 7243 int ii; 7244 u8 event; 7245 char *evStr = ioc->evStr; 7246 7247 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7248 evData0 = le32_to_cpu(pEventReply->Data[0]); 7249 7250 switch(event) { 7251 case MPI_EVENT_NONE: 7252 ds = "None"; 7253 break; 7254 case MPI_EVENT_LOG_DATA: 7255 ds = "Log Data"; 7256 break; 7257 case MPI_EVENT_STATE_CHANGE: 7258 ds = "State Change"; 7259 break; 7260 case MPI_EVENT_UNIT_ATTENTION: 7261 ds = "Unit Attention"; 7262 break; 7263 case MPI_EVENT_IOC_BUS_RESET: 7264 ds = "IOC Bus Reset"; 7265 break; 7266 case MPI_EVENT_EXT_BUS_RESET: 7267 ds = "External Bus Reset"; 7268 break; 7269 case MPI_EVENT_RESCAN: 7270 ds = "Bus Rescan Event"; 7271 break; 7272 case MPI_EVENT_LINK_STATUS_CHANGE: 7273 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) 7274 ds = "Link Status(FAILURE) Change"; 7275 else 7276 ds = "Link Status(ACTIVE) Change"; 7277 break; 7278 case MPI_EVENT_LOOP_STATE_CHANGE: 7279 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) 7280 ds = "Loop State(LIP) Change"; 7281 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) 7282 ds = "Loop State(LPE) Change"; 7283 else 7284 ds = "Loop State(LPB) Change"; 7285 break; 7286 case MPI_EVENT_LOGOUT: 7287 ds = "Logout"; 7288 break; 7289 case MPI_EVENT_EVENT_CHANGE: 7290 if (evData0) 7291 ds = "Events ON"; 7292 else 7293 ds = "Events OFF"; 7294 break; 7295 case MPI_EVENT_INTEGRATED_RAID: 7296 { 7297 u8 ReasonCode = (u8)(evData0 >> 16); 7298 switch (ReasonCode) { 7299 case MPI_EVENT_RAID_RC_VOLUME_CREATED : 7300 ds = "Integrated Raid: Volume Created"; 7301 break; 7302 case MPI_EVENT_RAID_RC_VOLUME_DELETED : 7303 ds = "Integrated Raid: Volume Deleted"; 7304 break; 7305 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : 7306 ds = "Integrated Raid: Volume Settings Changed"; 7307 break; 7308 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : 7309 ds = "Integrated Raid: Volume Status Changed"; 7310 break; 7311 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : 7312 ds = "Integrated Raid: Volume Physdisk Changed"; 7313 break; 7314 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : 7315 ds = "Integrated Raid: Physdisk Created"; 7316 break; 7317 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : 7318 ds = "Integrated Raid: Physdisk Deleted"; 7319 break; 7320 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : 7321 ds = "Integrated Raid: Physdisk Settings Changed"; 7322 break; 7323 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : 7324 ds = "Integrated Raid: Physdisk Status Changed"; 7325 break; 7326 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : 7327 ds = "Integrated Raid: Domain Validation Needed"; 7328 break; 7329 case MPI_EVENT_RAID_RC_SMART_DATA : 7330 ds = "Integrated Raid; Smart Data"; 7331 break; 7332 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : 7333 ds = "Integrated Raid: Replace Action Started"; 7334 break; 7335 default: 7336 ds = "Integrated Raid"; 7337 break; 7338 } 7339 break; 7340 } 7341 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: 7342 ds = "SCSI Device Status Change"; 7343 break; 7344 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 7345 { 7346 u8 id = (u8)(evData0); 7347 u8 channel = (u8)(evData0 >> 8); 7348 u8 ReasonCode = (u8)(evData0 >> 16); 7349 switch (ReasonCode) { 7350 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 7351 snprintf(evStr, EVENT_DESCR_STR_SZ, 7352 "SAS Device Status Change: Added: " 7353 "id=%d channel=%d", id, channel); 7354 break; 7355 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 7356 snprintf(evStr, EVENT_DESCR_STR_SZ, 7357 "SAS Device Status Change: Deleted: " 7358 "id=%d channel=%d", id, channel); 7359 break; 7360 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: 7361 snprintf(evStr, EVENT_DESCR_STR_SZ, 7362 "SAS Device Status Change: SMART Data: " 7363 "id=%d channel=%d", id, channel); 7364 break; 7365 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: 7366 snprintf(evStr, EVENT_DESCR_STR_SZ, 7367 "SAS Device Status Change: No Persistency: " 7368 "id=%d channel=%d", id, channel); 7369 break; 7370 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: 7371 snprintf(evStr, EVENT_DESCR_STR_SZ, 7372 "SAS Device Status Change: Unsupported Device " 7373 "Discovered : id=%d channel=%d", id, channel); 7374 break; 7375 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 7376 snprintf(evStr, EVENT_DESCR_STR_SZ, 7377 "SAS Device Status Change: Internal Device " 7378 "Reset : id=%d channel=%d", id, channel); 7379 break; 7380 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: 7381 snprintf(evStr, EVENT_DESCR_STR_SZ, 7382 "SAS Device Status Change: Internal Task " 7383 "Abort : id=%d channel=%d", id, channel); 7384 break; 7385 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: 7386 snprintf(evStr, EVENT_DESCR_STR_SZ, 7387 "SAS Device Status Change: Internal Abort " 7388 "Task Set : id=%d channel=%d", id, channel); 7389 break; 7390 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: 7391 snprintf(evStr, EVENT_DESCR_STR_SZ, 7392 "SAS Device Status Change: Internal Clear " 7393 "Task Set : id=%d channel=%d", id, channel); 7394 break; 7395 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: 7396 snprintf(evStr, EVENT_DESCR_STR_SZ, 7397 "SAS Device Status Change: Internal Query " 7398 "Task : id=%d channel=%d", id, channel); 7399 break; 7400 default: 7401 snprintf(evStr, EVENT_DESCR_STR_SZ, 7402 "SAS Device Status Change: Unknown: " 7403 "id=%d channel=%d", id, channel); 7404 break; 7405 } 7406 break; 7407 } 7408 case MPI_EVENT_ON_BUS_TIMER_EXPIRED: 7409 ds = "Bus Timer Expired"; 7410 break; 7411 case MPI_EVENT_QUEUE_FULL: 7412 { 7413 u16 curr_depth = (u16)(evData0 >> 16); 7414 u8 channel = (u8)(evData0 >> 8); 7415 u8 id = (u8)(evData0); 7416 7417 snprintf(evStr, EVENT_DESCR_STR_SZ, 7418 "Queue Full: channel=%d id=%d depth=%d", 7419 channel, id, curr_depth); 7420 break; 7421 } 7422 case MPI_EVENT_SAS_SES: 7423 ds = "SAS SES Event"; 7424 break; 7425 case MPI_EVENT_PERSISTENT_TABLE_FULL: 7426 ds = "Persistent Table Full"; 7427 break; 7428 case MPI_EVENT_SAS_PHY_LINK_STATUS: 7429 { 7430 u8 LinkRates = (u8)(evData0 >> 8); 7431 u8 PhyNumber = (u8)(evData0); 7432 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> 7433 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; 7434 switch (LinkRates) { 7435 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: 7436 snprintf(evStr, EVENT_DESCR_STR_SZ, 7437 "SAS PHY Link Status: Phy=%d:" 7438 " Rate Unknown",PhyNumber); 7439 break; 7440 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: 7441 snprintf(evStr, EVENT_DESCR_STR_SZ, 7442 "SAS PHY Link Status: Phy=%d:" 7443 " Phy Disabled",PhyNumber); 7444 break; 7445 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: 7446 snprintf(evStr, EVENT_DESCR_STR_SZ, 7447 "SAS PHY Link Status: Phy=%d:" 7448 " Failed Speed Nego",PhyNumber); 7449 break; 7450 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: 7451 snprintf(evStr, EVENT_DESCR_STR_SZ, 7452 "SAS PHY Link Status: Phy=%d:" 7453 " Sata OOB Completed",PhyNumber); 7454 break; 7455 case MPI_EVENT_SAS_PLS_LR_RATE_1_5: 7456 snprintf(evStr, EVENT_DESCR_STR_SZ, 7457 "SAS PHY Link Status: Phy=%d:" 7458 " Rate 1.5 Gbps",PhyNumber); 7459 break; 7460 case MPI_EVENT_SAS_PLS_LR_RATE_3_0: 7461 snprintf(evStr, EVENT_DESCR_STR_SZ, 7462 "SAS PHY Link Status: Phy=%d:" 7463 " Rate 3.0 Gbps", PhyNumber); 7464 break; 7465 case MPI_EVENT_SAS_PLS_LR_RATE_6_0: 7466 snprintf(evStr, EVENT_DESCR_STR_SZ, 7467 "SAS PHY Link Status: Phy=%d:" 7468 " Rate 6.0 Gbps", PhyNumber); 7469 break; 7470 default: 7471 snprintf(evStr, EVENT_DESCR_STR_SZ, 7472 "SAS PHY Link Status: Phy=%d", PhyNumber); 7473 break; 7474 } 7475 break; 7476 } 7477 case MPI_EVENT_SAS_DISCOVERY_ERROR: 7478 ds = "SAS Discovery Error"; 7479 break; 7480 case MPI_EVENT_IR_RESYNC_UPDATE: 7481 { 7482 u8 resync_complete = (u8)(evData0 >> 16); 7483 snprintf(evStr, EVENT_DESCR_STR_SZ, 7484 "IR Resync Update: Complete = %d:",resync_complete); 7485 break; 7486 } 7487 case MPI_EVENT_IR2: 7488 { 7489 u8 id = (u8)(evData0); 7490 u8 channel = (u8)(evData0 >> 8); 7491 u8 phys_num = (u8)(evData0 >> 24); 7492 u8 ReasonCode = (u8)(evData0 >> 16); 7493 7494 switch (ReasonCode) { 7495 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: 7496 snprintf(evStr, EVENT_DESCR_STR_SZ, 7497 "IR2: LD State Changed: " 7498 "id=%d channel=%d phys_num=%d", 7499 id, channel, phys_num); 7500 break; 7501 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: 7502 snprintf(evStr, EVENT_DESCR_STR_SZ, 7503 "IR2: PD State Changed " 7504 "id=%d channel=%d phys_num=%d", 7505 id, channel, phys_num); 7506 break; 7507 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: 7508 snprintf(evStr, EVENT_DESCR_STR_SZ, 7509 "IR2: Bad Block Table Full: " 7510 "id=%d channel=%d phys_num=%d", 7511 id, channel, phys_num); 7512 break; 7513 case MPI_EVENT_IR2_RC_PD_INSERTED: 7514 snprintf(evStr, EVENT_DESCR_STR_SZ, 7515 "IR2: PD Inserted: " 7516 "id=%d channel=%d phys_num=%d", 7517 id, channel, phys_num); 7518 break; 7519 case MPI_EVENT_IR2_RC_PD_REMOVED: 7520 snprintf(evStr, EVENT_DESCR_STR_SZ, 7521 "IR2: PD Removed: " 7522 "id=%d channel=%d phys_num=%d", 7523 id, channel, phys_num); 7524 break; 7525 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: 7526 snprintf(evStr, EVENT_DESCR_STR_SZ, 7527 "IR2: Foreign CFG Detected: " 7528 "id=%d channel=%d phys_num=%d", 7529 id, channel, phys_num); 7530 break; 7531 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: 7532 snprintf(evStr, EVENT_DESCR_STR_SZ, 7533 "IR2: Rebuild Medium Error: " 7534 "id=%d channel=%d phys_num=%d", 7535 id, channel, phys_num); 7536 break; 7537 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: 7538 snprintf(evStr, EVENT_DESCR_STR_SZ, 7539 "IR2: Dual Port Added: " 7540 "id=%d channel=%d phys_num=%d", 7541 id, channel, phys_num); 7542 break; 7543 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: 7544 snprintf(evStr, EVENT_DESCR_STR_SZ, 7545 "IR2: Dual Port Removed: " 7546 "id=%d channel=%d phys_num=%d", 7547 id, channel, phys_num); 7548 break; 7549 default: 7550 ds = "IR2"; 7551 break; 7552 } 7553 break; 7554 } 7555 case MPI_EVENT_SAS_DISCOVERY: 7556 { 7557 if (evData0) 7558 ds = "SAS Discovery: Start"; 7559 else 7560 ds = "SAS Discovery: Stop"; 7561 break; 7562 } 7563 case MPI_EVENT_LOG_ENTRY_ADDED: 7564 ds = "SAS Log Entry Added"; 7565 break; 7566 7567 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 7568 { 7569 u8 phy_num = (u8)(evData0); 7570 u8 port_num = (u8)(evData0 >> 8); 7571 u8 port_width = (u8)(evData0 >> 16); 7572 u8 primitive = (u8)(evData0 >> 24); 7573 snprintf(evStr, EVENT_DESCR_STR_SZ, 7574 "SAS Broadcast Primitive: phy=%d port=%d " 7575 "width=%d primitive=0x%02x", 7576 phy_num, port_num, port_width, primitive); 7577 break; 7578 } 7579 7580 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: 7581 { 7582 u8 reason = (u8)(evData0); 7583 7584 switch (reason) { 7585 case MPI_EVENT_SAS_INIT_RC_ADDED: 7586 ds = "SAS Initiator Status Change: Added"; 7587 break; 7588 case MPI_EVENT_SAS_INIT_RC_REMOVED: 7589 ds = "SAS Initiator Status Change: Deleted"; 7590 break; 7591 default: 7592 ds = "SAS Initiator Status Change"; 7593 break; 7594 } 7595 break; 7596 } 7597 7598 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: 7599 { 7600 u8 max_init = (u8)(evData0); 7601 u8 current_init = (u8)(evData0 >> 8); 7602 7603 snprintf(evStr, EVENT_DESCR_STR_SZ, 7604 "SAS Initiator Device Table Overflow: max initiators=%02d " 7605 "current initiators=%02d", 7606 max_init, current_init); 7607 break; 7608 } 7609 case MPI_EVENT_SAS_SMP_ERROR: 7610 { 7611 u8 status = (u8)(evData0); 7612 u8 port_num = (u8)(evData0 >> 8); 7613 u8 result = (u8)(evData0 >> 16); 7614 7615 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) 7616 snprintf(evStr, EVENT_DESCR_STR_SZ, 7617 "SAS SMP Error: port=%d result=0x%02x", 7618 port_num, result); 7619 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) 7620 snprintf(evStr, EVENT_DESCR_STR_SZ, 7621 "SAS SMP Error: port=%d : CRC Error", 7622 port_num); 7623 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) 7624 snprintf(evStr, EVENT_DESCR_STR_SZ, 7625 "SAS SMP Error: port=%d : Timeout", 7626 port_num); 7627 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) 7628 snprintf(evStr, EVENT_DESCR_STR_SZ, 7629 "SAS SMP Error: port=%d : No Destination", 7630 port_num); 7631 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) 7632 snprintf(evStr, EVENT_DESCR_STR_SZ, 7633 "SAS SMP Error: port=%d : Bad Destination", 7634 port_num); 7635 else 7636 snprintf(evStr, EVENT_DESCR_STR_SZ, 7637 "SAS SMP Error: port=%d : status=0x%02x", 7638 port_num, status); 7639 break; 7640 } 7641 7642 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 7643 { 7644 u8 reason = (u8)(evData0); 7645 7646 switch (reason) { 7647 case MPI_EVENT_SAS_EXP_RC_ADDED: 7648 ds = "Expander Status Change: Added"; 7649 break; 7650 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: 7651 ds = "Expander Status Change: Deleted"; 7652 break; 7653 default: 7654 ds = "Expander Status Change"; 7655 break; 7656 } 7657 break; 7658 } 7659 7660 /* 7661 * MPT base "custom" events may be added here... 7662 */ 7663 default: 7664 ds = "Unknown"; 7665 break; 7666 } 7667 if (ds) 7668 strscpy(evStr, ds, EVENT_DESCR_STR_SZ); 7669 7670 7671 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7672 "MPT event:(%02Xh) : %s\n", 7673 ioc->name, event, evStr)); 7674 7675 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM 7676 ": Event data:\n")); 7677 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) 7678 devtverboseprintk(ioc, printk(" %08x", 7679 le32_to_cpu(pEventReply->Data[ii]))); 7680 devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); 7681 } 7682 #endif 7683 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7684 /** 7685 * ProcessEventNotification - Route EventNotificationReply to all event handlers 7686 * @ioc: Pointer to MPT_ADAPTER structure 7687 * @pEventReply: Pointer to EventNotification reply frame 7688 * @evHandlers: Pointer to integer, number of event handlers 7689 * 7690 * Routes a received EventNotificationReply to all currently registered 7691 * event handlers. 7692 * Returns sum of event handlers return values. 7693 */ 7694 static int 7695 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) 7696 { 7697 u16 evDataLen; 7698 u32 evData0 = 0; 7699 int ii; 7700 u8 cb_idx; 7701 int r = 0; 7702 int handlers = 0; 7703 u8 event; 7704 7705 /* 7706 * Do platform normalization of values 7707 */ 7708 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7709 evDataLen = le16_to_cpu(pEventReply->EventDataLength); 7710 if (evDataLen) { 7711 evData0 = le32_to_cpu(pEventReply->Data[0]); 7712 } 7713 7714 #ifdef CONFIG_FUSION_LOGGING 7715 if (evDataLen) 7716 mpt_display_event_info(ioc, pEventReply); 7717 #endif 7718 7719 /* 7720 * Do general / base driver event processing 7721 */ 7722 switch(event) { 7723 case MPI_EVENT_EVENT_CHANGE: /* 0A */ 7724 if (evDataLen) { 7725 u8 evState = evData0 & 0xFF; 7726 7727 /* CHECKME! What if evState unexpectedly says OFF (0)? */ 7728 7729 /* Update EventState field in cached IocFacts */ 7730 if (ioc->facts.Function) { 7731 ioc->facts.EventState = evState; 7732 } 7733 } 7734 break; 7735 case MPI_EVENT_INTEGRATED_RAID: 7736 mptbase_raid_process_event_data(ioc, 7737 (MpiEventDataRaid_t *)pEventReply->Data); 7738 break; 7739 default: 7740 break; 7741 } 7742 7743 /* 7744 * Should this event be logged? Events are written sequentially. 7745 * When buffer is full, start again at the top. 7746 */ 7747 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 7748 int idx; 7749 7750 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 7751 7752 ioc->events[idx].event = event; 7753 ioc->events[idx].eventContext = ioc->eventContext; 7754 7755 for (ii = 0; ii < 2; ii++) { 7756 if (ii < evDataLen) 7757 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); 7758 else 7759 ioc->events[idx].data[ii] = 0; 7760 } 7761 7762 ioc->eventContext++; 7763 } 7764 7765 7766 /* 7767 * Call each currently registered protocol event handler. 7768 */ 7769 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7770 if (MptEvHandlers[cb_idx]) { 7771 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7772 "Routing Event to event handler #%d\n", 7773 ioc->name, cb_idx)); 7774 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); 7775 handlers++; 7776 } 7777 } 7778 /* FIXME? Examine results here? */ 7779 7780 /* 7781 * If needed, send (a single) EventAck. 7782 */ 7783 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { 7784 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7785 "EventAck required\n",ioc->name)); 7786 if ((ii = SendEventAck(ioc, pEventReply)) != 0) { 7787 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", 7788 ioc->name, ii)); 7789 } 7790 } 7791 7792 *evHandlers = handlers; 7793 return r; 7794 } 7795 7796 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7797 /** 7798 * mpt_fc_log_info - Log information returned from Fibre Channel IOC. 7799 * @ioc: Pointer to MPT_ADAPTER structure 7800 * @log_info: U32 LogInfo reply word from the IOC 7801 * 7802 * Refer to lsi/mpi_log_fc.h. 7803 */ 7804 static void 7805 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) 7806 { 7807 char *desc = "unknown"; 7808 7809 switch (log_info & 0xFF000000) { 7810 case MPI_IOCLOGINFO_FC_INIT_BASE: 7811 desc = "FCP Initiator"; 7812 break; 7813 case MPI_IOCLOGINFO_FC_TARGET_BASE: 7814 desc = "FCP Target"; 7815 break; 7816 case MPI_IOCLOGINFO_FC_LAN_BASE: 7817 desc = "LAN"; 7818 break; 7819 case MPI_IOCLOGINFO_FC_MSG_BASE: 7820 desc = "MPI Message Layer"; 7821 break; 7822 case MPI_IOCLOGINFO_FC_LINK_BASE: 7823 desc = "FC Link"; 7824 break; 7825 case MPI_IOCLOGINFO_FC_CTX_BASE: 7826 desc = "Context Manager"; 7827 break; 7828 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: 7829 desc = "Invalid Field Offset"; 7830 break; 7831 case MPI_IOCLOGINFO_FC_STATE_CHANGE: 7832 desc = "State Change Info"; 7833 break; 7834 } 7835 7836 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", 7837 ioc->name, log_info, desc, (log_info & 0xFFFFFF)); 7838 } 7839 7840 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7841 /** 7842 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. 7843 * @ioc: Pointer to MPT_ADAPTER structure 7844 * @log_info: U32 LogInfo word from the IOC 7845 * 7846 * Refer to lsi/sp_log.h. 7847 */ 7848 static void 7849 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) 7850 { 7851 u32 info = log_info & 0x00FF0000; 7852 char *desc = "unknown"; 7853 7854 switch (info) { 7855 case 0x00010000: 7856 desc = "bug! MID not found"; 7857 break; 7858 7859 case 0x00020000: 7860 desc = "Parity Error"; 7861 break; 7862 7863 case 0x00030000: 7864 desc = "ASYNC Outbound Overrun"; 7865 break; 7866 7867 case 0x00040000: 7868 desc = "SYNC Offset Error"; 7869 break; 7870 7871 case 0x00050000: 7872 desc = "BM Change"; 7873 break; 7874 7875 case 0x00060000: 7876 desc = "Msg In Overflow"; 7877 break; 7878 7879 case 0x00070000: 7880 desc = "DMA Error"; 7881 break; 7882 7883 case 0x00080000: 7884 desc = "Outbound DMA Overrun"; 7885 break; 7886 7887 case 0x00090000: 7888 desc = "Task Management"; 7889 break; 7890 7891 case 0x000A0000: 7892 desc = "Device Problem"; 7893 break; 7894 7895 case 0x000B0000: 7896 desc = "Invalid Phase Change"; 7897 break; 7898 7899 case 0x000C0000: 7900 desc = "Untagged Table Size"; 7901 break; 7902 7903 } 7904 7905 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); 7906 } 7907 7908 /* strings for sas loginfo */ 7909 static char *originator_str[] = { 7910 "IOP", /* 00h */ 7911 "PL", /* 01h */ 7912 "IR" /* 02h */ 7913 }; 7914 static char *iop_code_str[] = { 7915 NULL, /* 00h */ 7916 "Invalid SAS Address", /* 01h */ 7917 NULL, /* 02h */ 7918 "Invalid Page", /* 03h */ 7919 "Diag Message Error", /* 04h */ 7920 "Task Terminated", /* 05h */ 7921 "Enclosure Management", /* 06h */ 7922 "Target Mode" /* 07h */ 7923 }; 7924 static char *pl_code_str[] = { 7925 NULL, /* 00h */ 7926 "Open Failure", /* 01h */ 7927 "Invalid Scatter Gather List", /* 02h */ 7928 "Wrong Relative Offset or Frame Length", /* 03h */ 7929 "Frame Transfer Error", /* 04h */ 7930 "Transmit Frame Connected Low", /* 05h */ 7931 "SATA Non-NCQ RW Error Bit Set", /* 06h */ 7932 "SATA Read Log Receive Data Error", /* 07h */ 7933 "SATA NCQ Fail All Commands After Error", /* 08h */ 7934 "SATA Error in Receive Set Device Bit FIS", /* 09h */ 7935 "Receive Frame Invalid Message", /* 0Ah */ 7936 "Receive Context Message Valid Error", /* 0Bh */ 7937 "Receive Frame Current Frame Error", /* 0Ch */ 7938 "SATA Link Down", /* 0Dh */ 7939 "Discovery SATA Init W IOS", /* 0Eh */ 7940 "Config Invalid Page", /* 0Fh */ 7941 "Discovery SATA Init Timeout", /* 10h */ 7942 "Reset", /* 11h */ 7943 "Abort", /* 12h */ 7944 "IO Not Yet Executed", /* 13h */ 7945 "IO Executed", /* 14h */ 7946 "Persistent Reservation Out Not Affiliation " 7947 "Owner", /* 15h */ 7948 "Open Transmit DMA Abort", /* 16h */ 7949 "IO Device Missing Delay Retry", /* 17h */ 7950 "IO Cancelled Due to Receive Error", /* 18h */ 7951 NULL, /* 19h */ 7952 NULL, /* 1Ah */ 7953 NULL, /* 1Bh */ 7954 NULL, /* 1Ch */ 7955 NULL, /* 1Dh */ 7956 NULL, /* 1Eh */ 7957 NULL, /* 1Fh */ 7958 "Enclosure Management" /* 20h */ 7959 }; 7960 static char *ir_code_str[] = { 7961 "Raid Action Error", /* 00h */ 7962 NULL, /* 00h */ 7963 NULL, /* 01h */ 7964 NULL, /* 02h */ 7965 NULL, /* 03h */ 7966 NULL, /* 04h */ 7967 NULL, /* 05h */ 7968 NULL, /* 06h */ 7969 NULL /* 07h */ 7970 }; 7971 static char *raid_sub_code_str[] = { 7972 NULL, /* 00h */ 7973 "Volume Creation Failed: Data Passed too " 7974 "Large", /* 01h */ 7975 "Volume Creation Failed: Duplicate Volumes " 7976 "Attempted", /* 02h */ 7977 "Volume Creation Failed: Max Number " 7978 "Supported Volumes Exceeded", /* 03h */ 7979 "Volume Creation Failed: DMA Error", /* 04h */ 7980 "Volume Creation Failed: Invalid Volume Type", /* 05h */ 7981 "Volume Creation Failed: Error Reading " 7982 "MFG Page 4", /* 06h */ 7983 "Volume Creation Failed: Creating Internal " 7984 "Structures", /* 07h */ 7985 NULL, /* 08h */ 7986 NULL, /* 09h */ 7987 NULL, /* 0Ah */ 7988 NULL, /* 0Bh */ 7989 NULL, /* 0Ch */ 7990 NULL, /* 0Dh */ 7991 NULL, /* 0Eh */ 7992 NULL, /* 0Fh */ 7993 "Activation failed: Already Active Volume", /* 10h */ 7994 "Activation failed: Unsupported Volume Type", /* 11h */ 7995 "Activation failed: Too Many Active Volumes", /* 12h */ 7996 "Activation failed: Volume ID in Use", /* 13h */ 7997 "Activation failed: Reported Failure", /* 14h */ 7998 "Activation failed: Importing a Volume", /* 15h */ 7999 NULL, /* 16h */ 8000 NULL, /* 17h */ 8001 NULL, /* 18h */ 8002 NULL, /* 19h */ 8003 NULL, /* 1Ah */ 8004 NULL, /* 1Bh */ 8005 NULL, /* 1Ch */ 8006 NULL, /* 1Dh */ 8007 NULL, /* 1Eh */ 8008 NULL, /* 1Fh */ 8009 "Phys Disk failed: Too Many Phys Disks", /* 20h */ 8010 "Phys Disk failed: Data Passed too Large", /* 21h */ 8011 "Phys Disk failed: DMA Error", /* 22h */ 8012 "Phys Disk failed: Invalid <channel:id>", /* 23h */ 8013 "Phys Disk failed: Creating Phys Disk Config " 8014 "Page", /* 24h */ 8015 NULL, /* 25h */ 8016 NULL, /* 26h */ 8017 NULL, /* 27h */ 8018 NULL, /* 28h */ 8019 NULL, /* 29h */ 8020 NULL, /* 2Ah */ 8021 NULL, /* 2Bh */ 8022 NULL, /* 2Ch */ 8023 NULL, /* 2Dh */ 8024 NULL, /* 2Eh */ 8025 NULL, /* 2Fh */ 8026 "Compatibility Error: IR Disabled", /* 30h */ 8027 "Compatibility Error: Inquiry Command Failed", /* 31h */ 8028 "Compatibility Error: Device not Direct Access " 8029 "Device ", /* 32h */ 8030 "Compatibility Error: Removable Device Found", /* 33h */ 8031 "Compatibility Error: Device SCSI Version not " 8032 "2 or Higher", /* 34h */ 8033 "Compatibility Error: SATA Device, 48 BIT LBA " 8034 "not Supported", /* 35h */ 8035 "Compatibility Error: Device doesn't have " 8036 "512 Byte Block Sizes", /* 36h */ 8037 "Compatibility Error: Volume Type Check Failed", /* 37h */ 8038 "Compatibility Error: Volume Type is " 8039 "Unsupported by FW", /* 38h */ 8040 "Compatibility Error: Disk Drive too Small for " 8041 "use in Volume", /* 39h */ 8042 "Compatibility Error: Phys Disk for Create " 8043 "Volume not Found", /* 3Ah */ 8044 "Compatibility Error: Too Many or too Few " 8045 "Disks for Volume Type", /* 3Bh */ 8046 "Compatibility Error: Disk stripe Sizes " 8047 "Must be 64KB", /* 3Ch */ 8048 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ 8049 }; 8050 8051 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8052 /** 8053 * mpt_sas_log_info - Log information returned from SAS IOC. 8054 * @ioc: Pointer to MPT_ADAPTER structure 8055 * @log_info: U32 LogInfo reply word from the IOC 8056 * @cb_idx: callback function's handle 8057 * 8058 * Refer to lsi/mpi_log_sas.h. 8059 **/ 8060 static void 8061 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) 8062 { 8063 union loginfo_type { 8064 u32 loginfo; 8065 struct { 8066 u32 subcode:16; 8067 u32 code:8; 8068 u32 originator:4; 8069 u32 bus_type:4; 8070 } dw; 8071 }; 8072 union loginfo_type sas_loginfo; 8073 char *originator_desc = NULL; 8074 char *code_desc = NULL; 8075 char *sub_code_desc = NULL; 8076 8077 sas_loginfo.loginfo = log_info; 8078 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && 8079 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) 8080 return; 8081 8082 originator_desc = originator_str[sas_loginfo.dw.originator]; 8083 8084 switch (sas_loginfo.dw.originator) { 8085 8086 case 0: /* IOP */ 8087 if (sas_loginfo.dw.code < 8088 ARRAY_SIZE(iop_code_str)) 8089 code_desc = iop_code_str[sas_loginfo.dw.code]; 8090 break; 8091 case 1: /* PL */ 8092 if (sas_loginfo.dw.code < 8093 ARRAY_SIZE(pl_code_str)) 8094 code_desc = pl_code_str[sas_loginfo.dw.code]; 8095 break; 8096 case 2: /* IR */ 8097 if (sas_loginfo.dw.code >= 8098 ARRAY_SIZE(ir_code_str)) 8099 break; 8100 code_desc = ir_code_str[sas_loginfo.dw.code]; 8101 if (sas_loginfo.dw.subcode >= 8102 ARRAY_SIZE(raid_sub_code_str)) 8103 break; 8104 if (sas_loginfo.dw.code == 0) 8105 sub_code_desc = 8106 raid_sub_code_str[sas_loginfo.dw.subcode]; 8107 break; 8108 default: 8109 return; 8110 } 8111 8112 if (sub_code_desc != NULL) 8113 printk(MYIOC_s_INFO_FMT 8114 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8115 " SubCode={%s} cb_idx %s\n", 8116 ioc->name, log_info, originator_desc, code_desc, 8117 sub_code_desc, MptCallbacksName[cb_idx]); 8118 else if (code_desc != NULL) 8119 printk(MYIOC_s_INFO_FMT 8120 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8121 " SubCode(0x%04x) cb_idx %s\n", 8122 ioc->name, log_info, originator_desc, code_desc, 8123 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); 8124 else 8125 printk(MYIOC_s_INFO_FMT 8126 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," 8127 " SubCode(0x%04x) cb_idx %s\n", 8128 ioc->name, log_info, originator_desc, 8129 sas_loginfo.dw.code, sas_loginfo.dw.subcode, 8130 MptCallbacksName[cb_idx]); 8131 } 8132 8133 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8134 /** 8135 * mpt_iocstatus_info_config - IOCSTATUS information for config pages 8136 * @ioc: Pointer to MPT_ADAPTER structure 8137 * @ioc_status: U32 IOCStatus word from IOC 8138 * @mf: Pointer to MPT request frame 8139 * 8140 * Refer to lsi/mpi.h. 8141 **/ 8142 static void 8143 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8144 { 8145 Config_t *pReq = (Config_t *)mf; 8146 char extend_desc[EVENT_DESCR_STR_SZ]; 8147 char *desc = NULL; 8148 u32 form; 8149 u8 page_type; 8150 8151 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) 8152 page_type = pReq->ExtPageType; 8153 else 8154 page_type = pReq->Header.PageType; 8155 8156 /* 8157 * ignore invalid page messages for GET_NEXT_HANDLE 8158 */ 8159 form = le32_to_cpu(pReq->PageAddress); 8160 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 8161 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || 8162 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || 8163 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { 8164 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == 8165 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) 8166 return; 8167 } 8168 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) 8169 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == 8170 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 8171 return; 8172 } 8173 8174 snprintf(extend_desc, EVENT_DESCR_STR_SZ, 8175 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", 8176 page_type, pReq->Header.PageNumber, pReq->Action, form); 8177 8178 switch (ioc_status) { 8179 8180 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8181 desc = "Config Page Invalid Action"; 8182 break; 8183 8184 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8185 desc = "Config Page Invalid Type"; 8186 break; 8187 8188 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8189 desc = "Config Page Invalid Page"; 8190 break; 8191 8192 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8193 desc = "Config Page Invalid Data"; 8194 break; 8195 8196 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8197 desc = "Config Page No Defaults"; 8198 break; 8199 8200 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8201 desc = "Config Page Can't Commit"; 8202 break; 8203 } 8204 8205 if (!desc) 8206 return; 8207 8208 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", 8209 ioc->name, ioc_status, desc, extend_desc)); 8210 } 8211 8212 /** 8213 * mpt_iocstatus_info - IOCSTATUS information returned from IOC. 8214 * @ioc: Pointer to MPT_ADAPTER structure 8215 * @ioc_status: U32 IOCStatus word from IOC 8216 * @mf: Pointer to MPT request frame 8217 * 8218 * Refer to lsi/mpi.h. 8219 **/ 8220 static void 8221 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8222 { 8223 u32 status = ioc_status & MPI_IOCSTATUS_MASK; 8224 char *desc = NULL; 8225 8226 switch (status) { 8227 8228 /****************************************************************************/ 8229 /* Common IOCStatus values for all replies */ 8230 /****************************************************************************/ 8231 8232 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 8233 desc = "Invalid Function"; 8234 break; 8235 8236 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 8237 desc = "Busy"; 8238 break; 8239 8240 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 8241 desc = "Invalid SGL"; 8242 break; 8243 8244 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 8245 desc = "Internal Error"; 8246 break; 8247 8248 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 8249 desc = "Reserved"; 8250 break; 8251 8252 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 8253 desc = "Insufficient Resources"; 8254 break; 8255 8256 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 8257 desc = "Invalid Field"; 8258 break; 8259 8260 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 8261 desc = "Invalid State"; 8262 break; 8263 8264 /****************************************************************************/ 8265 /* Config IOCStatus values */ 8266 /****************************************************************************/ 8267 8268 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8269 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8270 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8271 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8272 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8273 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8274 mpt_iocstatus_info_config(ioc, status, mf); 8275 break; 8276 8277 /****************************************************************************/ 8278 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */ 8279 /* */ 8280 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ 8281 /* */ 8282 /****************************************************************************/ 8283 8284 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 8285 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 8286 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 8287 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 8288 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 8289 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 8290 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 8291 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 8292 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 8293 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 8294 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 8295 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 8296 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 8297 break; 8298 8299 /****************************************************************************/ 8300 /* SCSI Target values */ 8301 /****************************************************************************/ 8302 8303 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ 8304 desc = "Target: Priority IO"; 8305 break; 8306 8307 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ 8308 desc = "Target: Invalid Port"; 8309 break; 8310 8311 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ 8312 desc = "Target Invalid IO Index:"; 8313 break; 8314 8315 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ 8316 desc = "Target: Aborted"; 8317 break; 8318 8319 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ 8320 desc = "Target: No Conn Retryable"; 8321 break; 8322 8323 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ 8324 desc = "Target: No Connection"; 8325 break; 8326 8327 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ 8328 desc = "Target: Transfer Count Mismatch"; 8329 break; 8330 8331 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ 8332 desc = "Target: STS Data not Sent"; 8333 break; 8334 8335 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ 8336 desc = "Target: Data Offset Error"; 8337 break; 8338 8339 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ 8340 desc = "Target: Too Much Write Data"; 8341 break; 8342 8343 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ 8344 desc = "Target: IU Too Short"; 8345 break; 8346 8347 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ 8348 desc = "Target: ACK NAK Timeout"; 8349 break; 8350 8351 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ 8352 desc = "Target: Nak Received"; 8353 break; 8354 8355 /****************************************************************************/ 8356 /* Fibre Channel Direct Access values */ 8357 /****************************************************************************/ 8358 8359 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ 8360 desc = "FC: Aborted"; 8361 break; 8362 8363 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ 8364 desc = "FC: RX ID Invalid"; 8365 break; 8366 8367 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ 8368 desc = "FC: DID Invalid"; 8369 break; 8370 8371 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ 8372 desc = "FC: Node Logged Out"; 8373 break; 8374 8375 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ 8376 desc = "FC: Exchange Canceled"; 8377 break; 8378 8379 /****************************************************************************/ 8380 /* LAN values */ 8381 /****************************************************************************/ 8382 8383 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ 8384 desc = "LAN: Device not Found"; 8385 break; 8386 8387 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ 8388 desc = "LAN: Device Failure"; 8389 break; 8390 8391 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ 8392 desc = "LAN: Transmit Error"; 8393 break; 8394 8395 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ 8396 desc = "LAN: Transmit Aborted"; 8397 break; 8398 8399 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ 8400 desc = "LAN: Receive Error"; 8401 break; 8402 8403 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ 8404 desc = "LAN: Receive Aborted"; 8405 break; 8406 8407 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ 8408 desc = "LAN: Partial Packet"; 8409 break; 8410 8411 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ 8412 desc = "LAN: Canceled"; 8413 break; 8414 8415 /****************************************************************************/ 8416 /* Serial Attached SCSI values */ 8417 /****************************************************************************/ 8418 8419 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ 8420 desc = "SAS: SMP Request Failed"; 8421 break; 8422 8423 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ 8424 desc = "SAS: SMP Data Overrun"; 8425 break; 8426 8427 default: 8428 desc = "Others"; 8429 break; 8430 } 8431 8432 if (!desc) 8433 return; 8434 8435 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", 8436 ioc->name, status, desc)); 8437 } 8438 8439 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8440 EXPORT_SYMBOL(mpt_attach); 8441 EXPORT_SYMBOL(mpt_detach); 8442 #ifdef CONFIG_PM 8443 EXPORT_SYMBOL(mpt_resume); 8444 EXPORT_SYMBOL(mpt_suspend); 8445 #endif 8446 EXPORT_SYMBOL(ioc_list); 8447 EXPORT_SYMBOL(mpt_register); 8448 EXPORT_SYMBOL(mpt_deregister); 8449 EXPORT_SYMBOL(mpt_event_register); 8450 EXPORT_SYMBOL(mpt_event_deregister); 8451 EXPORT_SYMBOL(mpt_reset_register); 8452 EXPORT_SYMBOL(mpt_reset_deregister); 8453 EXPORT_SYMBOL(mpt_device_driver_register); 8454 EXPORT_SYMBOL(mpt_device_driver_deregister); 8455 EXPORT_SYMBOL(mpt_get_msg_frame); 8456 EXPORT_SYMBOL(mpt_put_msg_frame); 8457 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); 8458 EXPORT_SYMBOL(mpt_free_msg_frame); 8459 EXPORT_SYMBOL(mpt_send_handshake_request); 8460 EXPORT_SYMBOL(mpt_verify_adapter); 8461 EXPORT_SYMBOL(mpt_GetIocState); 8462 EXPORT_SYMBOL(mpt_print_ioc_summary); 8463 EXPORT_SYMBOL(mpt_HardResetHandler); 8464 EXPORT_SYMBOL(mpt_config); 8465 EXPORT_SYMBOL(mpt_findImVolumes); 8466 EXPORT_SYMBOL(mpt_alloc_fw_memory); 8467 EXPORT_SYMBOL(mpt_free_fw_memory); 8468 EXPORT_SYMBOL(mptbase_sas_persist_operation); 8469 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); 8470 8471 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8472 /** 8473 * fusion_init - Fusion MPT base driver initialization routine. 8474 * 8475 * Returns 0 for success, non-zero for failure. 8476 */ 8477 static int __init 8478 fusion_init(void) 8479 { 8480 u8 cb_idx; 8481 8482 show_mptmod_ver(my_NAME, my_VERSION); 8483 printk(KERN_INFO COPYRIGHT "\n"); 8484 8485 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 8486 MptCallbacks[cb_idx] = NULL; 8487 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 8488 MptEvHandlers[cb_idx] = NULL; 8489 MptResetHandlers[cb_idx] = NULL; 8490 } 8491 8492 /* Register ourselves (mptbase) in order to facilitate 8493 * EventNotification handling. 8494 */ 8495 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, 8496 "mptbase_reply"); 8497 8498 /* Register for hard reset handling callbacks. 8499 */ 8500 mpt_reset_register(mpt_base_index, mpt_ioc_reset); 8501 8502 #ifdef CONFIG_PROC_FS 8503 (void) procmpt_create(); 8504 #endif 8505 return 0; 8506 } 8507 8508 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8509 /** 8510 * fusion_exit - Perform driver unload cleanup. 8511 * 8512 * This routine frees all resources associated with each MPT adapter 8513 * and removes all %MPT_PROCFS_MPTBASEDIR entries. 8514 */ 8515 static void __exit 8516 fusion_exit(void) 8517 { 8518 8519 mpt_reset_deregister(mpt_base_index); 8520 8521 #ifdef CONFIG_PROC_FS 8522 procmpt_destroy(); 8523 #endif 8524 } 8525 8526 module_init(fusion_init); 8527 module_exit(fusion_exit); 8528