1 /* 2 * linux/drivers/message/fusion/mptbase.c 3 * This is the Fusion MPT base driver which supports multiple 4 * (SCSI + LAN) specialized protocol drivers. 5 * For use with LSI PCI chip/adapter(s) 6 * running LSI Fusion MPT (Message Passing Technology) firmware. 7 * 8 * Copyright (c) 1999-2008 LSI Corporation 9 * (mailto:DL-MPTFusionLinux@lsi.com) 10 * 11 */ 12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 13 /* 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; version 2 of the License. 17 18 This program is distributed in the hope that it will be useful, 19 but WITHOUT ANY WARRANTY; without even the implied warranty of 20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 GNU General Public License for more details. 22 23 NO WARRANTY 24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 28 solely responsible for determining the appropriateness of using and 29 distributing the Program and assumes all risks associated with its 30 exercise of rights under this Agreement, including but not limited to 31 the risks and costs of program errors, damage to or loss of data, 32 programs or equipment, and unavailability or interruption of operations. 33 34 DISCLAIMER OF LIABILITY 35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 42 43 You should have received a copy of the GNU General Public License 44 along with this program; if not, write to the Free Software 45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 46 */ 47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 48 49 #include <linux/kernel.h> 50 #include <linux/module.h> 51 #include <linux/errno.h> 52 #include <linux/init.h> 53 #include <linux/seq_file.h> 54 #include <linux/slab.h> 55 #include <linux/types.h> 56 #include <linux/pci.h> 57 #include <linux/kdev_t.h> 58 #include <linux/blkdev.h> 59 #include <linux/delay.h> 60 #include <linux/interrupt.h> 61 #include <linux/dma-mapping.h> 62 #include <linux/kthread.h> 63 #include <scsi/scsi_host.h> 64 65 #include "mptbase.h" 66 #include "lsi/mpi_log_fc.h" 67 68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 69 #define my_NAME "Fusion MPT base driver" 70 #define my_VERSION MPT_LINUX_VERSION_COMMON 71 #define MYNAM "mptbase" 72 73 MODULE_AUTHOR(MODULEAUTHOR); 74 MODULE_DESCRIPTION(my_NAME); 75 MODULE_LICENSE("GPL"); 76 MODULE_VERSION(my_VERSION); 77 78 /* 79 * cmd line parameters 80 */ 81 82 static int mpt_msi_enable_spi; 83 module_param(mpt_msi_enable_spi, int, 0); 84 MODULE_PARM_DESC(mpt_msi_enable_spi, 85 " Enable MSI Support for SPI controllers (default=0)"); 86 87 static int mpt_msi_enable_fc; 88 module_param(mpt_msi_enable_fc, int, 0); 89 MODULE_PARM_DESC(mpt_msi_enable_fc, 90 " Enable MSI Support for FC controllers (default=0)"); 91 92 static int mpt_msi_enable_sas; 93 module_param(mpt_msi_enable_sas, int, 0); 94 MODULE_PARM_DESC(mpt_msi_enable_sas, 95 " Enable MSI Support for SAS controllers (default=0)"); 96 97 static int mpt_channel_mapping; 98 module_param(mpt_channel_mapping, int, 0); 99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)"); 100 101 static int mpt_debug_level; 102 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp); 103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, 104 &mpt_debug_level, 0600); 105 MODULE_PARM_DESC(mpt_debug_level, 106 " debug level - refer to mptdebug.h - (default=0)"); 107 108 int mpt_fwfault_debug; 109 EXPORT_SYMBOL(mpt_fwfault_debug); 110 module_param(mpt_fwfault_debug, int, 0600); 111 MODULE_PARM_DESC(mpt_fwfault_debug, 112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); 113 114 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS] 115 [MPT_MAX_CALLBACKNAME_LEN+1]; 116 117 #ifdef MFCNT 118 static int mfcounter = 0; 119 #define PRINT_MF_COUNT 20000 120 #endif 121 122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 123 /* 124 * Public data... 125 */ 126 127 #define WHOINIT_UNKNOWN 0xAA 128 129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 130 /* 131 * Private data... 132 */ 133 /* Adapter link list */ 134 LIST_HEAD(ioc_list); 135 /* Callback lookup table */ 136 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS]; 137 /* Protocol driver class lookup table */ 138 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS]; 139 /* Event handler lookup table */ 140 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 141 /* Reset handler lookup table */ 142 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 143 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS]; 144 145 #ifdef CONFIG_PROC_FS 146 static struct proc_dir_entry *mpt_proc_root_dir; 147 #endif 148 149 /* 150 * Driver Callback Index's 151 */ 152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS; 153 static u8 last_drv_idx; 154 155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 156 /* 157 * Forward protos... 158 */ 159 static irqreturn_t mpt_interrupt(int irq, void *bus_id); 160 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, 161 MPT_FRAME_HDR *reply); 162 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, 163 u32 *req, int replyBytes, u16 *u16reply, int maxwait, 164 int sleepFlag); 165 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag); 166 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev); 167 static void mpt_adapter_disable(MPT_ADAPTER *ioc); 168 static void mpt_adapter_dispose(MPT_ADAPTER *ioc); 169 170 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); 171 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); 172 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); 173 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 174 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); 175 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag); 176 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag); 177 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag); 178 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 179 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag); 180 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag); 181 static int PrimeIocFifos(MPT_ADAPTER *ioc); 182 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 183 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 184 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag); 185 static int GetLanConfigPages(MPT_ADAPTER *ioc); 186 static int GetIoUnitPage2(MPT_ADAPTER *ioc); 187 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); 188 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum); 189 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum); 190 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc); 191 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc); 192 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc); 193 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, 194 int sleepFlag); 195 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp); 196 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag); 197 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init); 198 199 #ifdef CONFIG_PROC_FS 200 static int mpt_summary_proc_show(struct seq_file *m, void *v); 201 static int mpt_version_proc_show(struct seq_file *m, void *v); 202 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v); 203 #endif 204 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc); 205 206 static int ProcessEventNotification(MPT_ADAPTER *ioc, 207 EventNotificationReply_t *evReply, int *evHandlers); 208 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); 209 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); 210 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info); 211 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx); 212 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc); 213 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc); 214 215 /* module entry point */ 216 static int __init fusion_init (void); 217 static void __exit fusion_exit (void); 218 219 #define CHIPREG_READ32(addr) readl_relaxed(addr) 220 #define CHIPREG_READ32_dmasync(addr) readl(addr) 221 #define CHIPREG_WRITE32(addr,val) writel(val, addr) 222 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr) 223 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr) 224 225 static void 226 pci_disable_io_access(struct pci_dev *pdev) 227 { 228 u16 command_reg; 229 230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 231 command_reg &= ~1; 232 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 233 } 234 235 static void 236 pci_enable_io_access(struct pci_dev *pdev) 237 { 238 u16 command_reg; 239 240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg); 241 command_reg |= 1; 242 pci_write_config_word(pdev, PCI_COMMAND, command_reg); 243 } 244 245 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp) 246 { 247 int ret = param_set_int(val, kp); 248 MPT_ADAPTER *ioc; 249 250 if (ret) 251 return ret; 252 253 list_for_each_entry(ioc, &ioc_list, list) 254 ioc->debug_level = mpt_debug_level; 255 return 0; 256 } 257 258 /** 259 * mpt_get_cb_idx - obtain cb_idx for registered driver 260 * @dclass: class driver enum 261 * 262 * Returns cb_idx, or zero means it wasn't found 263 **/ 264 static u8 265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass) 266 { 267 u8 cb_idx; 268 269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) 270 if (MptDriverClass[cb_idx] == dclass) 271 return cb_idx; 272 return 0; 273 } 274 275 /** 276 * mpt_is_discovery_complete - determine if discovery has completed 277 * @ioc: per adatper instance 278 * 279 * Returns 1 when discovery completed, else zero. 280 */ 281 static int 282 mpt_is_discovery_complete(MPT_ADAPTER *ioc) 283 { 284 ConfigExtendedPageHeader_t hdr; 285 CONFIGPARMS cfg; 286 SasIOUnitPage0_t *buffer; 287 dma_addr_t dma_handle; 288 int rc = 0; 289 290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); 291 memset(&cfg, 0, sizeof(CONFIGPARMS)); 292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; 293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; 295 cfg.cfghdr.ehdr = &hdr; 296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 297 298 if ((mpt_config(ioc, &cfg))) 299 goto out; 300 if (!hdr.ExtPageLength) 301 goto out; 302 303 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, 304 &dma_handle, GFP_KERNEL); 305 if (!buffer) 306 goto out; 307 308 cfg.physAddr = dma_handle; 309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 310 311 if ((mpt_config(ioc, &cfg))) 312 goto out_free_consistent; 313 314 if (!(buffer->PhyData[0].PortFlags & 315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS)) 316 rc = 1; 317 318 out_free_consistent: 319 dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer, 320 dma_handle); 321 out: 322 return rc; 323 } 324 325 326 /** 327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc 328 * @arg: input argument, used to derive ioc 329 * 330 * Return 0 if controller is removed from pci subsystem. 331 * Return -1 for other case. 332 */ 333 static int mpt_remove_dead_ioc_func(void *arg) 334 { 335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; 336 struct pci_dev *pdev; 337 338 if (!ioc) 339 return -1; 340 341 pdev = ioc->pcidev; 342 if (!pdev) 343 return -1; 344 345 pci_stop_and_remove_bus_device_locked(pdev); 346 return 0; 347 } 348 349 350 351 /** 352 * mpt_fault_reset_work - work performed on workq after ioc fault 353 * @work: input argument, used to derive ioc 354 * 355 **/ 356 static void 357 mpt_fault_reset_work(struct work_struct *work) 358 { 359 MPT_ADAPTER *ioc = 360 container_of(work, MPT_ADAPTER, fault_reset_work.work); 361 u32 ioc_raw_state; 362 int rc; 363 unsigned long flags; 364 MPT_SCSI_HOST *hd; 365 struct task_struct *p; 366 367 if (ioc->ioc_reset_in_progress || !ioc->active) 368 goto out; 369 370 371 ioc_raw_state = mpt_GetIocState(ioc, 0); 372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) { 373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n", 374 ioc->name, __func__); 375 376 /* 377 * Call mptscsih_flush_pending_cmds callback so that we 378 * flush all pending commands back to OS. 379 * This call is required to aovid deadlock at block layer. 380 * Dead IOC will fail to do diag reset,and this call is safe 381 * since dead ioc will never return any command back from HW. 382 */ 383 hd = shost_priv(ioc->sh); 384 ioc->schedule_dead_ioc_flush_running_cmds(hd); 385 386 /*Remove the Dead Host */ 387 p = kthread_run(mpt_remove_dead_ioc_func, ioc, 388 "mpt_dead_ioc_%d", ioc->id); 389 if (IS_ERR(p)) { 390 printk(MYIOC_s_ERR_FMT 391 "%s: Running mpt_dead_ioc thread failed !\n", 392 ioc->name, __func__); 393 } else { 394 printk(MYIOC_s_WARN_FMT 395 "%s: Running mpt_dead_ioc thread success !\n", 396 ioc->name, __func__); 397 } 398 return; /* don't rearm timer */ 399 } 400 401 if ((ioc_raw_state & MPI_IOC_STATE_MASK) 402 == MPI_IOC_STATE_FAULT) { 403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n", 404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n", 406 ioc->name, __func__); 407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP); 408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name, 409 __func__, (rc == 0) ? "success" : "failed"); 410 ioc_raw_state = mpt_GetIocState(ioc, 0); 411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) 412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after " 413 "reset (%04xh)\n", ioc->name, ioc_raw_state & 414 MPI_DOORBELL_DATA_MASK); 415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) { 416 if ((mpt_is_discovery_complete(ioc))) { 417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing " 418 "discovery_quiesce_io flag\n", ioc->name)); 419 ioc->sas_discovery_quiesce_io = 0; 420 } 421 } 422 423 out: 424 /* 425 * Take turns polling alternate controller 426 */ 427 if (ioc->alt_ioc) 428 ioc = ioc->alt_ioc; 429 430 /* rearm the timer */ 431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 432 if (ioc->reset_work_q) 433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 434 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 436 } 437 438 439 /* 440 * Process turbo (context) reply... 441 */ 442 static void 443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) 444 { 445 MPT_FRAME_HDR *mf = NULL; 446 MPT_FRAME_HDR *mr = NULL; 447 u16 req_idx = 0; 448 u8 cb_idx; 449 450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n", 451 ioc->name, pa)); 452 453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { 454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: 455 req_idx = pa & 0x0000FFFF; 456 cb_idx = (pa & 0x00FF0000) >> 16; 457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 458 break; 459 case MPI_CONTEXT_REPLY_TYPE_LAN: 460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER); 461 /* 462 * Blind set of mf to NULL here was fatal 463 * after lan_reply says "freeme" 464 * Fix sort of combined with an optimization here; 465 * added explicit check for case where lan_reply 466 * was just returning 1 and doing nothing else. 467 * For this case skip the callback, but set up 468 * proper mf value first here:-) 469 */ 470 if ((pa & 0x58000000) == 0x58000000) { 471 req_idx = pa & 0x0000FFFF; 472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 473 mpt_free_msg_frame(ioc, mf); 474 mb(); 475 return; 476 } 477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 478 break; 479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: 480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER); 481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); 482 break; 483 default: 484 cb_idx = 0; 485 BUG(); 486 } 487 488 /* Check for (valid) IO callback! */ 489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 490 MptCallbacks[cb_idx] == NULL) { 491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 492 __func__, ioc->name, cb_idx); 493 goto out; 494 } 495 496 if (MptCallbacks[cb_idx](ioc, mf, mr)) 497 mpt_free_msg_frame(ioc, mf); 498 out: 499 mb(); 500 } 501 502 static void 503 mpt_reply(MPT_ADAPTER *ioc, u32 pa) 504 { 505 MPT_FRAME_HDR *mf; 506 MPT_FRAME_HDR *mr; 507 u16 req_idx; 508 u8 cb_idx; 509 int freeme; 510 511 u32 reply_dma_low; 512 u16 ioc_stat; 513 514 /* non-TURBO reply! Hmmm, something may be up... 515 * Newest turbo reply mechanism; get address 516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! 517 */ 518 519 /* Map DMA address of reply header to cpu address. 520 * pa is 32 bits - but the dma address may be 32 or 64 bits 521 * get offset based only only the low addresses 522 */ 523 524 reply_dma_low = (pa <<= 1); 525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + 526 (reply_dma_low - ioc->reply_frames_low_dma)); 527 528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); 529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; 530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx); 531 532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", 533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); 534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr); 535 536 /* Check/log IOC log info 537 */ 538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); 539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { 540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); 541 if (ioc->bus_type == FC) 542 mpt_fc_log_info(ioc, log_info); 543 else if (ioc->bus_type == SPI) 544 mpt_spi_log_info(ioc, log_info); 545 else if (ioc->bus_type == SAS) 546 mpt_sas_log_info(ioc, log_info, cb_idx); 547 } 548 549 if (ioc_stat & MPI_IOCSTATUS_MASK) 550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf); 551 552 /* Check for (valid) IO callback! */ 553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || 554 MptCallbacks[cb_idx] == NULL) { 555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", 556 __func__, ioc->name, cb_idx); 557 freeme = 0; 558 goto out; 559 } 560 561 freeme = MptCallbacks[cb_idx](ioc, mf, mr); 562 563 out: 564 /* Flush (non-TURBO) reply with a WRITE! */ 565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); 566 567 if (freeme) 568 mpt_free_msg_frame(ioc, mf); 569 mb(); 570 } 571 572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 573 /** 574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. 575 * @irq: irq number (not used) 576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure 577 * 578 * This routine is registered via the request_irq() kernel API call, 579 * and handles all interrupts generated from a specific MPT adapter 580 * (also referred to as a IO Controller or IOC). 581 * This routine must clear the interrupt from the adapter and does 582 * so by reading the reply FIFO. Multiple replies may be processed 583 * per single call to this routine. 584 * 585 * This routine handles register-level access of the adapter but 586 * dispatches (calls) a protocol-specific callback routine to handle 587 * the protocol-specific details of the MPT request completion. 588 */ 589 static irqreturn_t 590 mpt_interrupt(int irq, void *bus_id) 591 { 592 MPT_ADAPTER *ioc = bus_id; 593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 594 595 if (pa == 0xFFFFFFFF) 596 return IRQ_NONE; 597 598 /* 599 * Drain the reply FIFO! 600 */ 601 do { 602 if (pa & MPI_ADDRESS_REPLY_A_BIT) 603 mpt_reply(ioc, pa); 604 else 605 mpt_turbo_reply(ioc, pa); 606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); 607 } while (pa != 0xFFFFFFFF); 608 609 return IRQ_HANDLED; 610 } 611 612 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 613 /** 614 * mptbase_reply - MPT base driver's callback routine 615 * @ioc: Pointer to MPT_ADAPTER structure 616 * @req: Pointer to original MPT request frame 617 * @reply: Pointer to MPT reply frame (NULL if TurboReply) 618 * 619 * MPT base driver's callback routine; all base driver 620 * "internal" request/reply processing is routed here. 621 * Currently used for EventNotification and EventAck handling. 622 * 623 * Returns 1 indicating original alloc'd request frame ptr 624 * should be freed, or 0 if it shouldn't. 625 */ 626 static int 627 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) 628 { 629 EventNotificationReply_t *pEventReply; 630 u8 event; 631 int evHandlers; 632 int freereq = 1; 633 634 switch (reply->u.hdr.Function) { 635 case MPI_FUNCTION_EVENT_NOTIFICATION: 636 pEventReply = (EventNotificationReply_t *)reply; 637 evHandlers = 0; 638 ProcessEventNotification(ioc, pEventReply, &evHandlers); 639 event = le32_to_cpu(pEventReply->Event) & 0xFF; 640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) 641 freereq = 0; 642 if (event != MPI_EVENT_EVENT_CHANGE) 643 break; 644 fallthrough; 645 case MPI_FUNCTION_CONFIG: 646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL: 647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD; 648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID; 649 memcpy(ioc->mptbase_cmds.reply, reply, 650 min(MPT_DEFAULT_FRAME_SIZE, 651 4 * reply->u.reply.MsgLength)); 652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING; 654 complete(&ioc->mptbase_cmds.done); 655 } else 656 freereq = 0; 657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF) 658 freereq = 1; 659 break; 660 case MPI_FUNCTION_EVENT_ACK: 661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 662 "EventAck reply received\n", ioc->name)); 663 break; 664 default: 665 printk(MYIOC_s_ERR_FMT 666 "Unexpected msg function (=%02Xh) reply received!\n", 667 ioc->name, reply->u.hdr.Function); 668 break; 669 } 670 671 /* 672 * Conditionally tell caller to free the original 673 * EventNotification/EventAck/unexpected request frame! 674 */ 675 return freereq; 676 } 677 678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 679 /** 680 * mpt_register - Register protocol-specific main callback handler. 681 * @cbfunc: callback function pointer 682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value) 683 * @func_name: call function's name 684 * 685 * This routine is called by a protocol-specific driver (SCSI host, 686 * LAN, SCSI target) to register its reply callback routine. Each 687 * protocol-specific driver must do this before it will be able to 688 * use any IOC resources, such as obtaining request frames. 689 * 690 * NOTES: The SCSI protocol driver currently calls this routine thrice 691 * in order to register separate callbacks; one for "normal" SCSI IO; 692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests. 693 * 694 * Returns u8 valued "handle" in the range (and S.O.D. order) 695 * {N,...,7,6,5,...,1} if successful. 696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be 697 * considered an error by the caller. 698 */ 699 u8 700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name) 701 { 702 u8 cb_idx; 703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS; 704 705 /* 706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1} 707 * (slot/handle 0 is reserved!) 708 */ 709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 710 if (MptCallbacks[cb_idx] == NULL) { 711 MptCallbacks[cb_idx] = cbfunc; 712 MptDriverClass[cb_idx] = dclass; 713 MptEvHandlers[cb_idx] = NULL; 714 last_drv_idx = cb_idx; 715 strscpy(MptCallbacksName[cb_idx], func_name, 716 MPT_MAX_CALLBACKNAME_LEN+1); 717 break; 718 } 719 } 720 721 return last_drv_idx; 722 } 723 724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 725 /** 726 * mpt_deregister - Deregister a protocol drivers resources. 727 * @cb_idx: previously registered callback handle 728 * 729 * Each protocol-specific driver should call this routine when its 730 * module is unloaded. 731 */ 732 void 733 mpt_deregister(u8 cb_idx) 734 { 735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) { 736 MptCallbacks[cb_idx] = NULL; 737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 738 MptEvHandlers[cb_idx] = NULL; 739 740 last_drv_idx++; 741 } 742 } 743 744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 745 /** 746 * mpt_event_register - Register protocol-specific event callback handler. 747 * @cb_idx: previously registered (via mpt_register) callback handle 748 * @ev_cbfunc: callback function 749 * 750 * This routine can be called by one or more protocol-specific drivers 751 * if/when they choose to be notified of MPT events. 752 * 753 * Returns 0 for success. 754 */ 755 int 756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) 757 { 758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 759 return -1; 760 761 MptEvHandlers[cb_idx] = ev_cbfunc; 762 return 0; 763 } 764 765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 766 /** 767 * mpt_event_deregister - Deregister protocol-specific event callback handler 768 * @cb_idx: previously registered callback handle 769 * 770 * Each protocol-specific driver should call this routine 771 * when it does not (or can no longer) handle events, 772 * or when its module is unloaded. 773 */ 774 void 775 mpt_event_deregister(u8 cb_idx) 776 { 777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 778 return; 779 780 MptEvHandlers[cb_idx] = NULL; 781 } 782 783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 784 /** 785 * mpt_reset_register - Register protocol-specific IOC reset handler. 786 * @cb_idx: previously registered (via mpt_register) callback handle 787 * @reset_func: reset function 788 * 789 * This routine can be called by one or more protocol-specific drivers 790 * if/when they choose to be notified of IOC resets. 791 * 792 * Returns 0 for success. 793 */ 794 int 795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func) 796 { 797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 798 return -1; 799 800 MptResetHandlers[cb_idx] = reset_func; 801 return 0; 802 } 803 804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 805 /** 806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler. 807 * @cb_idx: previously registered callback handle 808 * 809 * Each protocol-specific driver should call this routine 810 * when it does not (or can no longer) handle IOC reset handling, 811 * or when its module is unloaded. 812 */ 813 void 814 mpt_reset_deregister(u8 cb_idx) 815 { 816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 817 return; 818 819 MptResetHandlers[cb_idx] = NULL; 820 } 821 822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 823 /** 824 * mpt_device_driver_register - Register device driver hooks 825 * @dd_cbfunc: driver callbacks struct 826 * @cb_idx: MPT protocol driver index 827 */ 828 int 829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx) 830 { 831 MPT_ADAPTER *ioc; 832 833 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 834 return -EINVAL; 835 836 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc; 837 838 /* call per pci device probe entry point */ 839 list_for_each_entry(ioc, &ioc_list, list) { 840 if (dd_cbfunc->probe) 841 dd_cbfunc->probe(ioc->pcidev); 842 } 843 844 return 0; 845 } 846 847 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 848 /** 849 * mpt_device_driver_deregister - DeRegister device driver hooks 850 * @cb_idx: MPT protocol driver index 851 */ 852 void 853 mpt_device_driver_deregister(u8 cb_idx) 854 { 855 struct mpt_pci_driver *dd_cbfunc; 856 MPT_ADAPTER *ioc; 857 858 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS) 859 return; 860 861 dd_cbfunc = MptDeviceDriverHandlers[cb_idx]; 862 863 list_for_each_entry(ioc, &ioc_list, list) { 864 if (dd_cbfunc->remove) 865 dd_cbfunc->remove(ioc->pcidev); 866 } 867 868 MptDeviceDriverHandlers[cb_idx] = NULL; 869 } 870 871 872 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 873 /** 874 * mpt_get_msg_frame - Obtain an MPT request frame from the pool 875 * @cb_idx: Handle of registered MPT protocol driver 876 * @ioc: Pointer to MPT adapter structure 877 * 878 * Obtain an MPT request frame from the pool (of 1024) that are 879 * allocated per MPT adapter. 880 * 881 * Returns pointer to a MPT request frame or %NULL if none are available 882 * or IOC is not active. 883 */ 884 MPT_FRAME_HDR* 885 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) 886 { 887 MPT_FRAME_HDR *mf; 888 unsigned long flags; 889 u16 req_idx; /* Request index */ 890 891 /* validate handle and ioc identifier */ 892 893 #ifdef MFCNT 894 if (!ioc->active) 895 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame " 896 "returning NULL!\n", ioc->name); 897 #endif 898 899 /* If interrupts are not attached, do not return a request frame */ 900 if (!ioc->active) 901 return NULL; 902 903 spin_lock_irqsave(&ioc->FreeQlock, flags); 904 if (!list_empty(&ioc->FreeQ)) { 905 int req_offset; 906 907 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR, 908 u.frame.linkage.list); 909 list_del(&mf->u.frame.linkage.list); 910 mf->u.frame.linkage.arg1 = 0; 911 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 912 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 913 /* u16! */ 914 req_idx = req_offset / ioc->req_sz; 915 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 916 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 917 /* Default, will be changed if necessary in SG generation */ 918 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame; 919 #ifdef MFCNT 920 ioc->mfcnt++; 921 #endif 922 } 923 else 924 mf = NULL; 925 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 926 927 #ifdef MFCNT 928 if (mf == NULL) 929 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! " 930 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt, 931 ioc->req_depth); 932 mfcounter++; 933 if (mfcounter == PRINT_MF_COUNT) 934 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name, 935 ioc->mfcnt, ioc->req_depth); 936 #endif 937 938 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n", 939 ioc->name, cb_idx, ioc->id, mf)); 940 return mf; 941 } 942 943 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 944 /** 945 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC 946 * @cb_idx: Handle of registered MPT protocol driver 947 * @ioc: Pointer to MPT adapter structure 948 * @mf: Pointer to MPT request frame 949 * 950 * This routine posts an MPT request frame to the request post FIFO of a 951 * specific MPT adapter. 952 */ 953 void 954 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 955 { 956 u32 mf_dma_addr; 957 int req_offset; 958 u16 req_idx; /* Request index */ 959 960 /* ensure values are reset properly! */ 961 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */ 962 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 963 /* u16! */ 964 req_idx = req_offset / ioc->req_sz; 965 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 966 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 967 968 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 969 970 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx]; 971 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d " 972 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, 973 ioc->RequestNB[req_idx])); 974 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr); 975 } 976 977 /** 978 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame 979 * @cb_idx: Handle of registered MPT protocol driver 980 * @ioc: Pointer to MPT adapter structure 981 * @mf: Pointer to MPT request frame 982 * 983 * Send a protocol-specific MPT request frame to an IOC using 984 * hi-priority request queue. 985 * 986 * This routine posts an MPT request frame to the request post FIFO of a 987 * specific MPT adapter. 988 **/ 989 void 990 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 991 { 992 u32 mf_dma_addr; 993 int req_offset; 994 u16 req_idx; /* Request index */ 995 996 /* ensure values are reset properly! */ 997 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 998 req_offset = (u8 *)mf - (u8 *)ioc->req_frames; 999 req_idx = req_offset / ioc->req_sz; 1000 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx); 1001 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0; 1002 1003 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf); 1004 1005 mf_dma_addr = (ioc->req_frames_low_dma + req_offset); 1006 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n", 1007 ioc->name, mf_dma_addr, req_idx)); 1008 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr); 1009 } 1010 1011 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1012 /** 1013 * mpt_free_msg_frame - Place MPT request frame back on FreeQ. 1014 * @ioc: Pointer to MPT adapter structure 1015 * @mf: Pointer to MPT request frame 1016 * 1017 * This routine places a MPT request frame back on the MPT adapter's 1018 * FreeQ. 1019 */ 1020 void 1021 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) 1022 { 1023 unsigned long flags; 1024 1025 /* Put Request back on FreeQ! */ 1026 spin_lock_irqsave(&ioc->FreeQlock, flags); 1027 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf) 1028 goto out; 1029 /* signature to know if this mf is freed */ 1030 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf); 1031 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ); 1032 #ifdef MFCNT 1033 ioc->mfcnt--; 1034 #endif 1035 out: 1036 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 1037 } 1038 1039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1040 /** 1041 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr. 1042 * @pAddr: virtual address for SGE 1043 * @flagslength: SGE flags and data transfer length 1044 * @dma_addr: Physical address 1045 * 1046 * This routine places a MPT request frame back on the MPT adapter's 1047 * FreeQ. 1048 */ 1049 static void 1050 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1051 { 1052 SGESimple32_t *pSge = (SGESimple32_t *) pAddr; 1053 pSge->FlagsLength = cpu_to_le32(flagslength); 1054 pSge->Address = cpu_to_le32(dma_addr); 1055 } 1056 1057 /** 1058 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr. 1059 * @pAddr: virtual address for SGE 1060 * @flagslength: SGE flags and data transfer length 1061 * @dma_addr: Physical address 1062 * 1063 * This routine places a MPT request frame back on the MPT adapter's 1064 * FreeQ. 1065 **/ 1066 static void 1067 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1068 { 1069 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1070 pSge->Address.Low = cpu_to_le32 1071 (lower_32_bits(dma_addr)); 1072 pSge->Address.High = cpu_to_le32 1073 (upper_32_bits(dma_addr)); 1074 pSge->FlagsLength = cpu_to_le32 1075 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1076 } 1077 1078 /** 1079 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround). 1080 * @pAddr: virtual address for SGE 1081 * @flagslength: SGE flags and data transfer length 1082 * @dma_addr: Physical address 1083 * 1084 * This routine places a MPT request frame back on the MPT adapter's 1085 * FreeQ. 1086 **/ 1087 static void 1088 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr) 1089 { 1090 SGESimple64_t *pSge = (SGESimple64_t *) pAddr; 1091 u32 tmp; 1092 1093 pSge->Address.Low = cpu_to_le32 1094 (lower_32_bits(dma_addr)); 1095 tmp = (u32)(upper_32_bits(dma_addr)); 1096 1097 /* 1098 * 1078 errata workaround for the 36GB limitation 1099 */ 1100 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) { 1101 flagslength |= 1102 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS); 1103 tmp |= (1<<31); 1104 if (mpt_debug_level & MPT_DEBUG_36GB_MEM) 1105 printk(KERN_DEBUG "1078 P0M2 addressing for " 1106 "addr = 0x%llx len = %d\n", 1107 (unsigned long long)dma_addr, 1108 MPI_SGE_LENGTH(flagslength)); 1109 } 1110 1111 pSge->Address.High = cpu_to_le32(tmp); 1112 pSge->FlagsLength = cpu_to_le32( 1113 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING)); 1114 } 1115 1116 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1117 /** 1118 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr. 1119 * @pAddr: virtual address for SGE 1120 * @next: nextChainOffset value (u32's) 1121 * @length: length of next SGL segment 1122 * @dma_addr: Physical address 1123 * 1124 */ 1125 static void 1126 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1127 { 1128 SGEChain32_t *pChain = (SGEChain32_t *) pAddr; 1129 1130 pChain->Length = cpu_to_le16(length); 1131 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; 1132 pChain->NextChainOffset = next; 1133 pChain->Address = cpu_to_le32(dma_addr); 1134 } 1135 1136 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1137 /** 1138 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr. 1139 * @pAddr: virtual address for SGE 1140 * @next: nextChainOffset value (u32's) 1141 * @length: length of next SGL segment 1142 * @dma_addr: Physical address 1143 * 1144 */ 1145 static void 1146 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr) 1147 { 1148 SGEChain64_t *pChain = (SGEChain64_t *) pAddr; 1149 u32 tmp = dma_addr & 0xFFFFFFFF; 1150 1151 pChain->Length = cpu_to_le16(length); 1152 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT | 1153 MPI_SGE_FLAGS_64_BIT_ADDRESSING); 1154 1155 pChain->NextChainOffset = next; 1156 1157 pChain->Address.Low = cpu_to_le32(tmp); 1158 tmp = (u32)(upper_32_bits(dma_addr)); 1159 pChain->Address.High = cpu_to_le32(tmp); 1160 } 1161 1162 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1163 /** 1164 * mpt_send_handshake_request - Send MPT request via doorbell handshake method. 1165 * @cb_idx: Handle of registered MPT protocol driver 1166 * @ioc: Pointer to MPT adapter structure 1167 * @reqBytes: Size of the request in bytes 1168 * @req: Pointer to MPT request frame 1169 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 1170 * 1171 * This routine is used exclusively to send MptScsiTaskMgmt 1172 * requests since they are required to be sent via doorbell handshake. 1173 * 1174 * NOTE: It is the callers responsibility to byte-swap fields in the 1175 * request which are greater than 1 byte in size. 1176 * 1177 * Returns 0 for success, non-zero for failure. 1178 */ 1179 int 1180 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag) 1181 { 1182 int r = 0; 1183 u8 *req_as_bytes; 1184 int ii; 1185 1186 /* State is known to be good upon entering 1187 * this function so issue the bus reset 1188 * request. 1189 */ 1190 1191 /* 1192 * Emulate what mpt_put_msg_frame() does /wrt to sanity 1193 * setting cb_idx/req_idx. But ONLY if this request 1194 * is in proper (pre-alloc'd) request buffer range... 1195 */ 1196 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req); 1197 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) { 1198 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req; 1199 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii); 1200 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; 1201 } 1202 1203 /* Make sure there are no doorbells */ 1204 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1205 1206 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1207 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 1208 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 1209 1210 /* Wait for IOC doorbell int */ 1211 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) { 1212 return ii; 1213 } 1214 1215 /* Read doorbell and check for active bit */ 1216 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 1217 return -5; 1218 1219 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n", 1220 ioc->name, ii)); 1221 1222 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1223 1224 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1225 return -2; 1226 } 1227 1228 /* Send request via doorbell handshake */ 1229 req_as_bytes = (u8 *) req; 1230 for (ii = 0; ii < reqBytes/4; ii++) { 1231 u32 word; 1232 1233 word = ((req_as_bytes[(ii*4) + 0] << 0) | 1234 (req_as_bytes[(ii*4) + 1] << 8) | 1235 (req_as_bytes[(ii*4) + 2] << 16) | 1236 (req_as_bytes[(ii*4) + 3] << 24)); 1237 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) { 1239 r = -3; 1240 break; 1241 } 1242 } 1243 1244 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0) 1245 r = 0; 1246 else 1247 r = -4; 1248 1249 /* Make sure there are no doorbells */ 1250 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1251 1252 return r; 1253 } 1254 1255 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1256 /** 1257 * mpt_host_page_access_control - control the IOC's Host Page Buffer access 1258 * @ioc: Pointer to MPT adapter structure 1259 * @access_control_value: define bits below 1260 * @sleepFlag: Specifies whether the process can sleep 1261 * 1262 * Provides mechanism for the host driver to control the IOC's 1263 * Host Page Buffer access. 1264 * 1265 * Access Control Value - bits[15:12] 1266 * 0h Reserved 1267 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS } 1268 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS } 1269 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER } 1270 * 1271 * Returns 0 for success, non-zero for failure. 1272 */ 1273 1274 static int 1275 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag) 1276 { 1277 /* return if in use */ 1278 if (CHIPREG_READ32(&ioc->chip->Doorbell) 1279 & MPI_DOORBELL_ACTIVE) 1280 return -1; 1281 1282 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1283 1284 CHIPREG_WRITE32(&ioc->chip->Doorbell, 1285 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL 1286 <<MPI_DOORBELL_FUNCTION_SHIFT) | 1287 (access_control_value<<12))); 1288 1289 /* Wait for IOC to clear Doorbell Status bit */ 1290 if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0) 1291 return -2; 1292 else 1293 return 0; 1294 } 1295 1296 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1297 /** 1298 * mpt_host_page_alloc - allocate system memory for the fw 1299 * @ioc: Pointer to pointer to IOC adapter 1300 * @ioc_init: Pointer to ioc init config page 1301 * 1302 * If we already allocated memory in past, then resend the same pointer. 1303 * Returns 0 for success, non-zero for failure. 1304 */ 1305 static int 1306 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) 1307 { 1308 char *psge; 1309 int flags_length; 1310 u32 host_page_buffer_sz=0; 1311 1312 if(!ioc->HostPageBuffer) { 1313 1314 host_page_buffer_sz = 1315 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF; 1316 1317 if(!host_page_buffer_sz) 1318 return 0; /* fw doesn't need any host buffers */ 1319 1320 /* spin till we get enough memory */ 1321 while (host_page_buffer_sz > 0) { 1322 ioc->HostPageBuffer = 1323 dma_alloc_coherent(&ioc->pcidev->dev, 1324 host_page_buffer_sz, 1325 &ioc->HostPageBuffer_dma, 1326 GFP_KERNEL); 1327 if (ioc->HostPageBuffer) { 1328 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 1329 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n", 1330 ioc->name, ioc->HostPageBuffer, 1331 (u32)ioc->HostPageBuffer_dma, 1332 host_page_buffer_sz)); 1333 ioc->alloc_total += host_page_buffer_sz; 1334 ioc->HostPageBuffer_sz = host_page_buffer_sz; 1335 break; 1336 } 1337 1338 host_page_buffer_sz -= (4*1024); 1339 } 1340 } 1341 1342 if(!ioc->HostPageBuffer) { 1343 printk(MYIOC_s_ERR_FMT 1344 "Failed to alloc memory for host_page_buffer!\n", 1345 ioc->name); 1346 return -999; 1347 } 1348 1349 psge = (char *)&ioc_init->HostPageBufferSGE; 1350 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT | 1351 MPI_SGE_FLAGS_SYSTEM_ADDRESS | 1352 MPI_SGE_FLAGS_HOST_TO_IOC | 1353 MPI_SGE_FLAGS_END_OF_BUFFER; 1354 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT; 1355 flags_length |= ioc->HostPageBuffer_sz; 1356 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma); 1357 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE; 1358 1359 return 0; 1360 } 1361 1362 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1363 /** 1364 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure. 1365 * @iocid: IOC unique identifier (integer) 1366 * @iocpp: Pointer to pointer to IOC adapter 1367 * 1368 * Given a unique IOC identifier, set pointer to the associated MPT 1369 * adapter structure. 1370 * 1371 * Returns iocid and sets iocpp if iocid is found. 1372 * Returns -1 if iocid is not found. 1373 */ 1374 int 1375 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp) 1376 { 1377 MPT_ADAPTER *ioc; 1378 1379 list_for_each_entry(ioc,&ioc_list,list) { 1380 if (ioc->id == iocid) { 1381 *iocpp =ioc; 1382 return iocid; 1383 } 1384 } 1385 1386 *iocpp = NULL; 1387 return -1; 1388 } 1389 1390 /** 1391 * mpt_get_product_name - returns product string 1392 * @vendor: pci vendor id 1393 * @device: pci device id 1394 * @revision: pci revision id 1395 * 1396 * Returns product string displayed when driver loads, 1397 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product 1398 * 1399 **/ 1400 static const char* 1401 mpt_get_product_name(u16 vendor, u16 device, u8 revision) 1402 { 1403 char *product_str = NULL; 1404 1405 if (vendor == PCI_VENDOR_ID_BROCADE) { 1406 switch (device) 1407 { 1408 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1409 switch (revision) 1410 { 1411 case 0x00: 1412 product_str = "BRE040 A0"; 1413 break; 1414 case 0x01: 1415 product_str = "BRE040 A1"; 1416 break; 1417 default: 1418 product_str = "BRE040"; 1419 break; 1420 } 1421 break; 1422 } 1423 goto out; 1424 } 1425 1426 switch (device) 1427 { 1428 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1429 product_str = "LSIFC909 B1"; 1430 break; 1431 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1432 product_str = "LSIFC919 B0"; 1433 break; 1434 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1435 product_str = "LSIFC929 B0"; 1436 break; 1437 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1438 if (revision < 0x80) 1439 product_str = "LSIFC919X A0"; 1440 else 1441 product_str = "LSIFC919XL A1"; 1442 break; 1443 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1444 if (revision < 0x80) 1445 product_str = "LSIFC929X A0"; 1446 else 1447 product_str = "LSIFC929XL A1"; 1448 break; 1449 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1450 product_str = "LSIFC939X A1"; 1451 break; 1452 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1453 product_str = "LSIFC949X A1"; 1454 break; 1455 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1456 switch (revision) 1457 { 1458 case 0x00: 1459 product_str = "LSIFC949E A0"; 1460 break; 1461 case 0x01: 1462 product_str = "LSIFC949E A1"; 1463 break; 1464 default: 1465 product_str = "LSIFC949E"; 1466 break; 1467 } 1468 break; 1469 case MPI_MANUFACTPAGE_DEVID_53C1030: 1470 switch (revision) 1471 { 1472 case 0x00: 1473 product_str = "LSI53C1030 A0"; 1474 break; 1475 case 0x01: 1476 product_str = "LSI53C1030 B0"; 1477 break; 1478 case 0x03: 1479 product_str = "LSI53C1030 B1"; 1480 break; 1481 case 0x07: 1482 product_str = "LSI53C1030 B2"; 1483 break; 1484 case 0x08: 1485 product_str = "LSI53C1030 C0"; 1486 break; 1487 case 0x80: 1488 product_str = "LSI53C1030T A0"; 1489 break; 1490 case 0x83: 1491 product_str = "LSI53C1030T A2"; 1492 break; 1493 case 0x87: 1494 product_str = "LSI53C1030T A3"; 1495 break; 1496 case 0xc1: 1497 product_str = "LSI53C1020A A1"; 1498 break; 1499 default: 1500 product_str = "LSI53C1030"; 1501 break; 1502 } 1503 break; 1504 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1505 switch (revision) 1506 { 1507 case 0x03: 1508 product_str = "LSI53C1035 A2"; 1509 break; 1510 case 0x04: 1511 product_str = "LSI53C1035 B0"; 1512 break; 1513 default: 1514 product_str = "LSI53C1035"; 1515 break; 1516 } 1517 break; 1518 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1519 switch (revision) 1520 { 1521 case 0x00: 1522 product_str = "LSISAS1064 A1"; 1523 break; 1524 case 0x01: 1525 product_str = "LSISAS1064 A2"; 1526 break; 1527 case 0x02: 1528 product_str = "LSISAS1064 A3"; 1529 break; 1530 case 0x03: 1531 product_str = "LSISAS1064 A4"; 1532 break; 1533 default: 1534 product_str = "LSISAS1064"; 1535 break; 1536 } 1537 break; 1538 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1539 switch (revision) 1540 { 1541 case 0x00: 1542 product_str = "LSISAS1064E A0"; 1543 break; 1544 case 0x01: 1545 product_str = "LSISAS1064E B0"; 1546 break; 1547 case 0x02: 1548 product_str = "LSISAS1064E B1"; 1549 break; 1550 case 0x04: 1551 product_str = "LSISAS1064E B2"; 1552 break; 1553 case 0x08: 1554 product_str = "LSISAS1064E B3"; 1555 break; 1556 default: 1557 product_str = "LSISAS1064E"; 1558 break; 1559 } 1560 break; 1561 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1562 switch (revision) 1563 { 1564 case 0x00: 1565 product_str = "LSISAS1068 A0"; 1566 break; 1567 case 0x01: 1568 product_str = "LSISAS1068 B0"; 1569 break; 1570 case 0x02: 1571 product_str = "LSISAS1068 B1"; 1572 break; 1573 default: 1574 product_str = "LSISAS1068"; 1575 break; 1576 } 1577 break; 1578 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1579 switch (revision) 1580 { 1581 case 0x00: 1582 product_str = "LSISAS1068E A0"; 1583 break; 1584 case 0x01: 1585 product_str = "LSISAS1068E B0"; 1586 break; 1587 case 0x02: 1588 product_str = "LSISAS1068E B1"; 1589 break; 1590 case 0x04: 1591 product_str = "LSISAS1068E B2"; 1592 break; 1593 case 0x08: 1594 product_str = "LSISAS1068E B3"; 1595 break; 1596 default: 1597 product_str = "LSISAS1068E"; 1598 break; 1599 } 1600 break; 1601 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1602 switch (revision) 1603 { 1604 case 0x00: 1605 product_str = "LSISAS1078 A0"; 1606 break; 1607 case 0x01: 1608 product_str = "LSISAS1078 B0"; 1609 break; 1610 case 0x02: 1611 product_str = "LSISAS1078 C0"; 1612 break; 1613 case 0x03: 1614 product_str = "LSISAS1078 C1"; 1615 break; 1616 case 0x04: 1617 product_str = "LSISAS1078 C2"; 1618 break; 1619 default: 1620 product_str = "LSISAS1078"; 1621 break; 1622 } 1623 break; 1624 } 1625 1626 out: 1627 return product_str; 1628 } 1629 1630 /** 1631 * mpt_mapresources - map in memory mapped io 1632 * @ioc: Pointer to pointer to IOC adapter 1633 * 1634 **/ 1635 static int 1636 mpt_mapresources(MPT_ADAPTER *ioc) 1637 { 1638 u8 __iomem *mem; 1639 int ii; 1640 resource_size_t mem_phys; 1641 unsigned long port; 1642 u32 msize; 1643 u32 psize; 1644 int r = -ENODEV; 1645 struct pci_dev *pdev; 1646 1647 pdev = ioc->pcidev; 1648 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); 1649 if (pci_enable_device_mem(pdev)) { 1650 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() " 1651 "failed\n", ioc->name); 1652 return r; 1653 } 1654 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) { 1655 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with " 1656 "MEM failed\n", ioc->name); 1657 goto out_pci_disable_device; 1658 } 1659 1660 if (sizeof(dma_addr_t) > 4) { 1661 const uint64_t required_mask = dma_get_required_mask 1662 (&pdev->dev); 1663 if (required_mask > DMA_BIT_MASK(32) 1664 && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) 1665 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { 1666 ioc->dma_mask = DMA_BIT_MASK(64); 1667 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1668 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1669 ioc->name)); 1670 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) 1671 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { 1672 ioc->dma_mask = DMA_BIT_MASK(32); 1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1674 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1675 ioc->name)); 1676 } else { 1677 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1678 ioc->name, pci_name(pdev)); 1679 goto out_pci_release_region; 1680 } 1681 } else { 1682 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) 1683 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) { 1684 ioc->dma_mask = DMA_BIT_MASK(32); 1685 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 1686 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n", 1687 ioc->name)); 1688 } else { 1689 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n", 1690 ioc->name, pci_name(pdev)); 1691 goto out_pci_release_region; 1692 } 1693 } 1694 1695 mem_phys = msize = 0; 1696 port = psize = 0; 1697 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) { 1698 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) { 1699 if (psize) 1700 continue; 1701 /* Get I/O space! */ 1702 port = pci_resource_start(pdev, ii); 1703 psize = pci_resource_len(pdev, ii); 1704 } else { 1705 if (msize) 1706 continue; 1707 /* Get memmap */ 1708 mem_phys = pci_resource_start(pdev, ii); 1709 msize = pci_resource_len(pdev, ii); 1710 } 1711 } 1712 ioc->mem_size = msize; 1713 1714 mem = NULL; 1715 /* Get logical ptr for PciMem0 space */ 1716 /*mem = ioremap(mem_phys, msize);*/ 1717 mem = ioremap(mem_phys, msize); 1718 if (mem == NULL) { 1719 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter" 1720 " memory!\n", ioc->name); 1721 r = -EINVAL; 1722 goto out_pci_release_region; 1723 } 1724 ioc->memmap = mem; 1725 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n", 1726 ioc->name, mem, (unsigned long long)mem_phys)); 1727 1728 ioc->mem_phys = mem_phys; 1729 ioc->chip = (SYSIF_REGS __iomem *)mem; 1730 1731 /* Save Port IO values in case we need to do downloadboot */ 1732 ioc->pio_mem_phys = port; 1733 ioc->pio_chip = (SYSIF_REGS __iomem *)port; 1734 1735 return 0; 1736 1737 out_pci_release_region: 1738 pci_release_selected_regions(pdev, ioc->bars); 1739 out_pci_disable_device: 1740 pci_disable_device(pdev); 1741 return r; 1742 } 1743 1744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 1745 /** 1746 * mpt_attach - Install a PCI intelligent MPT adapter. 1747 * @pdev: Pointer to pci_dev structure 1748 * @id: PCI device ID information 1749 * 1750 * This routine performs all the steps necessary to bring the IOC of 1751 * a MPT adapter to a OPERATIONAL state. This includes registering 1752 * memory regions, registering the interrupt, and allocating request 1753 * and reply memory pools. 1754 * 1755 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 1756 * MPT adapter. 1757 * 1758 * Returns 0 for success, non-zero for failure. 1759 * 1760 * TODO: Add support for polled controllers 1761 */ 1762 int 1763 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) 1764 { 1765 MPT_ADAPTER *ioc; 1766 u8 cb_idx; 1767 int r = -ENODEV; 1768 u8 pcixcmd; 1769 static int mpt_ids = 0; 1770 #ifdef CONFIG_PROC_FS 1771 struct proc_dir_entry *dent; 1772 #endif 1773 1774 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL); 1775 if (ioc == NULL) { 1776 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n"); 1777 return -ENOMEM; 1778 } 1779 1780 ioc->id = mpt_ids++; 1781 sprintf(ioc->name, "ioc%d", ioc->id); 1782 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n")); 1783 1784 /* 1785 * set initial debug level 1786 * (refer to mptdebug.h) 1787 * 1788 */ 1789 ioc->debug_level = mpt_debug_level; 1790 if (mpt_debug_level) 1791 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level); 1792 1793 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name)); 1794 1795 ioc->pcidev = pdev; 1796 if (mpt_mapresources(ioc)) { 1797 goto out_free_ioc; 1798 } 1799 1800 /* 1801 * Setting up proper handlers for scatter gather handling 1802 */ 1803 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 1804 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 1805 ioc->add_sge = &mpt_add_sge_64bit_1078; 1806 else 1807 ioc->add_sge = &mpt_add_sge_64bit; 1808 ioc->add_chain = &mpt_add_chain_64bit; 1809 ioc->sg_addr_size = 8; 1810 } else { 1811 ioc->add_sge = &mpt_add_sge; 1812 ioc->add_chain = &mpt_add_chain; 1813 ioc->sg_addr_size = 4; 1814 } 1815 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 1816 1817 ioc->alloc_total = sizeof(MPT_ADAPTER); 1818 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */ 1819 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 1820 1821 1822 spin_lock_init(&ioc->taskmgmt_lock); 1823 mutex_init(&ioc->internal_cmds.mutex); 1824 init_completion(&ioc->internal_cmds.done); 1825 mutex_init(&ioc->mptbase_cmds.mutex); 1826 init_completion(&ioc->mptbase_cmds.done); 1827 mutex_init(&ioc->taskmgmt_cmds.mutex); 1828 init_completion(&ioc->taskmgmt_cmds.done); 1829 1830 /* Initialize the event logging. 1831 */ 1832 ioc->eventTypes = 0; /* None */ 1833 ioc->eventContext = 0; 1834 ioc->eventLogSize = 0; 1835 ioc->events = NULL; 1836 1837 #ifdef MFCNT 1838 ioc->mfcnt = 0; 1839 #endif 1840 1841 ioc->sh = NULL; 1842 ioc->cached_fw = NULL; 1843 1844 /* Initialize SCSI Config Data structure 1845 */ 1846 memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); 1847 1848 /* Initialize the fc rport list head. 1849 */ 1850 INIT_LIST_HEAD(&ioc->fc_rports); 1851 1852 /* Find lookup slot. */ 1853 INIT_LIST_HEAD(&ioc->list); 1854 1855 1856 /* Initialize workqueue */ 1857 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work); 1858 1859 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN, 1860 "mpt_poll_%d", ioc->id); 1861 ioc->reset_work_q = alloc_workqueue(ioc->reset_work_q_name, 1862 WQ_MEM_RECLAIM, 0); 1863 if (!ioc->reset_work_q) { 1864 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1865 ioc->name); 1866 r = -ENOMEM; 1867 goto out_unmap_resources; 1868 } 1869 1870 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n", 1871 ioc->name, &ioc->facts, &ioc->pfacts[0])); 1872 1873 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device, 1874 pdev->revision); 1875 1876 switch (pdev->device) 1877 { 1878 case MPI_MANUFACTPAGE_DEVICEID_FC939X: 1879 case MPI_MANUFACTPAGE_DEVICEID_FC949X: 1880 ioc->errata_flag_1064 = 1; 1881 fallthrough; 1882 case MPI_MANUFACTPAGE_DEVICEID_FC909: 1883 case MPI_MANUFACTPAGE_DEVICEID_FC929: 1884 case MPI_MANUFACTPAGE_DEVICEID_FC919: 1885 case MPI_MANUFACTPAGE_DEVICEID_FC949E: 1886 ioc->bus_type = FC; 1887 break; 1888 1889 case MPI_MANUFACTPAGE_DEVICEID_FC929X: 1890 if (pdev->revision < XL_929) { 1891 /* 929X Chip Fix. Set Split transactions level 1892 * for PCIX. Set MOST bits to zero. 1893 */ 1894 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1895 pcixcmd &= 0x8F; 1896 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1897 } else { 1898 /* 929XL Chip Fix. Set MMRBC to 0x08. 1899 */ 1900 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1901 pcixcmd |= 0x08; 1902 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1903 } 1904 ioc->bus_type = FC; 1905 break; 1906 1907 case MPI_MANUFACTPAGE_DEVICEID_FC919X: 1908 /* 919X Chip Fix. Set Split transactions level 1909 * for PCIX. Set MOST bits to zero. 1910 */ 1911 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1912 pcixcmd &= 0x8F; 1913 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1914 ioc->bus_type = FC; 1915 break; 1916 1917 case MPI_MANUFACTPAGE_DEVID_53C1030: 1918 /* 1030 Chip Fix. Disable Split transactions 1919 * for PCIX. Set MOST bits to zero if Rev < C0( = 8). 1920 */ 1921 if (pdev->revision < C0_1030) { 1922 pci_read_config_byte(pdev, 0x6a, &pcixcmd); 1923 pcixcmd &= 0x8F; 1924 pci_write_config_byte(pdev, 0x6a, pcixcmd); 1925 } 1926 fallthrough; 1927 1928 case MPI_MANUFACTPAGE_DEVID_1030_53C1035: 1929 ioc->bus_type = SPI; 1930 break; 1931 1932 case MPI_MANUFACTPAGE_DEVID_SAS1064: 1933 case MPI_MANUFACTPAGE_DEVID_SAS1068: 1934 ioc->errata_flag_1064 = 1; 1935 ioc->bus_type = SAS; 1936 break; 1937 1938 case MPI_MANUFACTPAGE_DEVID_SAS1064E: 1939 case MPI_MANUFACTPAGE_DEVID_SAS1068E: 1940 case MPI_MANUFACTPAGE_DEVID_SAS1078: 1941 ioc->bus_type = SAS; 1942 break; 1943 } 1944 1945 1946 switch (ioc->bus_type) { 1947 1948 case SAS: 1949 ioc->msi_enable = mpt_msi_enable_sas; 1950 break; 1951 1952 case SPI: 1953 ioc->msi_enable = mpt_msi_enable_spi; 1954 break; 1955 1956 case FC: 1957 ioc->msi_enable = mpt_msi_enable_fc; 1958 break; 1959 1960 default: 1961 ioc->msi_enable = 0; 1962 break; 1963 } 1964 1965 ioc->fw_events_off = 1; 1966 1967 if (ioc->errata_flag_1064) 1968 pci_disable_io_access(pdev); 1969 1970 spin_lock_init(&ioc->FreeQlock); 1971 1972 /* Disable all! */ 1973 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 1974 ioc->active = 0; 1975 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 1976 1977 /* Set IOC ptr in the pcidev's driver data. */ 1978 pci_set_drvdata(ioc->pcidev, ioc); 1979 1980 /* Set lookup ptr. */ 1981 list_add_tail(&ioc->list, &ioc_list); 1982 1983 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets. 1984 */ 1985 mpt_detect_bound_ports(ioc, pdev); 1986 1987 INIT_LIST_HEAD(&ioc->fw_event_list); 1988 spin_lock_init(&ioc->fw_event_lock); 1989 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id); 1990 ioc->fw_event_q = alloc_workqueue(ioc->fw_event_q_name, 1991 WQ_MEM_RECLAIM, 0); 1992 if (!ioc->fw_event_q) { 1993 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n", 1994 ioc->name); 1995 r = -ENOMEM; 1996 goto out_remove_ioc; 1997 } 1998 1999 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2000 CAN_SLEEP)) != 0){ 2001 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n", 2002 ioc->name, r); 2003 2004 destroy_workqueue(ioc->fw_event_q); 2005 ioc->fw_event_q = NULL; 2006 2007 list_del(&ioc->list); 2008 if (ioc->alt_ioc) 2009 ioc->alt_ioc->alt_ioc = NULL; 2010 iounmap(ioc->memmap); 2011 if (pci_is_enabled(pdev)) 2012 pci_disable_device(pdev); 2013 if (r != -5) 2014 pci_release_selected_regions(pdev, ioc->bars); 2015 2016 destroy_workqueue(ioc->reset_work_q); 2017 ioc->reset_work_q = NULL; 2018 2019 kfree(ioc); 2020 return r; 2021 } 2022 2023 /* call per device driver probe entry point */ 2024 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2025 if(MptDeviceDriverHandlers[cb_idx] && 2026 MptDeviceDriverHandlers[cb_idx]->probe) { 2027 MptDeviceDriverHandlers[cb_idx]->probe(pdev); 2028 } 2029 } 2030 2031 #ifdef CONFIG_PROC_FS 2032 /* 2033 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter. 2034 */ 2035 dent = proc_mkdir(ioc->name, mpt_proc_root_dir); 2036 if (dent) { 2037 proc_create_single_data("info", S_IRUGO, dent, 2038 mpt_iocinfo_proc_show, ioc); 2039 proc_create_single_data("summary", S_IRUGO, dent, 2040 mpt_summary_proc_show, ioc); 2041 } 2042 #endif 2043 2044 if (!ioc->alt_ioc) 2045 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work, 2046 msecs_to_jiffies(MPT_POLLING_INTERVAL)); 2047 2048 return 0; 2049 2050 out_remove_ioc: 2051 list_del(&ioc->list); 2052 if (ioc->alt_ioc) 2053 ioc->alt_ioc->alt_ioc = NULL; 2054 2055 destroy_workqueue(ioc->reset_work_q); 2056 ioc->reset_work_q = NULL; 2057 2058 out_unmap_resources: 2059 iounmap(ioc->memmap); 2060 pci_disable_device(pdev); 2061 pci_release_selected_regions(pdev, ioc->bars); 2062 2063 out_free_ioc: 2064 kfree(ioc); 2065 2066 return r; 2067 } 2068 2069 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2070 /** 2071 * mpt_detach - Remove a PCI intelligent MPT adapter. 2072 * @pdev: Pointer to pci_dev structure 2073 */ 2074 2075 void 2076 mpt_detach(struct pci_dev *pdev) 2077 { 2078 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2079 char pname[64]; 2080 u8 cb_idx; 2081 unsigned long flags; 2082 struct workqueue_struct *wq; 2083 2084 /* 2085 * Stop polling ioc for fault condition 2086 */ 2087 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 2088 wq = ioc->reset_work_q; 2089 ioc->reset_work_q = NULL; 2090 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 2091 cancel_delayed_work(&ioc->fault_reset_work); 2092 destroy_workqueue(wq); 2093 2094 spin_lock_irqsave(&ioc->fw_event_lock, flags); 2095 wq = ioc->fw_event_q; 2096 ioc->fw_event_q = NULL; 2097 spin_unlock_irqrestore(&ioc->fw_event_lock, flags); 2098 destroy_workqueue(wq); 2099 2100 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name); 2101 remove_proc_entry(pname, NULL); 2102 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name); 2103 remove_proc_entry(pname, NULL); 2104 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name); 2105 remove_proc_entry(pname, NULL); 2106 2107 /* call per device driver remove entry point */ 2108 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 2109 if(MptDeviceDriverHandlers[cb_idx] && 2110 MptDeviceDriverHandlers[cb_idx]->remove) { 2111 MptDeviceDriverHandlers[cb_idx]->remove(pdev); 2112 } 2113 } 2114 2115 /* Disable interrupts! */ 2116 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2117 2118 ioc->active = 0; 2119 synchronize_irq(pdev->irq); 2120 2121 /* Clear any lingering interrupt */ 2122 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2123 2124 CHIPREG_READ32(&ioc->chip->IntStatus); 2125 2126 mpt_adapter_dispose(ioc); 2127 2128 } 2129 2130 /************************************************************************** 2131 * Power Management 2132 */ 2133 #ifdef CONFIG_PM 2134 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2135 /** 2136 * mpt_suspend - Fusion MPT base driver suspend routine. 2137 * @pdev: Pointer to pci_dev structure 2138 * @state: new state to enter 2139 */ 2140 int 2141 mpt_suspend(struct pci_dev *pdev, pm_message_t state) 2142 { 2143 u32 device_state; 2144 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2145 2146 device_state = pci_choose_state(pdev, state); 2147 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering " 2148 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2149 device_state); 2150 2151 /* put ioc into READY_STATE */ 2152 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) { 2153 printk(MYIOC_s_ERR_FMT 2154 "pci-suspend: IOC msg unit reset failed!\n", ioc->name); 2155 } 2156 2157 /* disable interrupts */ 2158 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2159 ioc->active = 0; 2160 2161 /* Clear any lingering interrupt */ 2162 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2163 2164 free_irq(ioc->pci_irq, ioc); 2165 if (ioc->msi_enable) 2166 pci_disable_msi(ioc->pcidev); 2167 ioc->pci_irq = -1; 2168 pci_save_state(pdev); 2169 pci_disable_device(pdev); 2170 pci_release_selected_regions(pdev, ioc->bars); 2171 pci_set_power_state(pdev, device_state); 2172 return 0; 2173 } 2174 2175 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2176 /** 2177 * mpt_resume - Fusion MPT base driver resume routine. 2178 * @pdev: Pointer to pci_dev structure 2179 */ 2180 int 2181 mpt_resume(struct pci_dev *pdev) 2182 { 2183 MPT_ADAPTER *ioc = pci_get_drvdata(pdev); 2184 u32 device_state = pdev->current_state; 2185 int recovery_state; 2186 int err; 2187 2188 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous " 2189 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev), 2190 device_state); 2191 2192 pci_set_power_state(pdev, PCI_D0); 2193 pci_enable_wake(pdev, PCI_D0, 0); 2194 pci_restore_state(pdev); 2195 ioc->pcidev = pdev; 2196 err = mpt_mapresources(ioc); 2197 if (err) 2198 return err; 2199 2200 if (ioc->dma_mask == DMA_BIT_MASK(64)) { 2201 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) 2202 ioc->add_sge = &mpt_add_sge_64bit_1078; 2203 else 2204 ioc->add_sge = &mpt_add_sge_64bit; 2205 ioc->add_chain = &mpt_add_chain_64bit; 2206 ioc->sg_addr_size = 8; 2207 } else { 2208 2209 ioc->add_sge = &mpt_add_sge; 2210 ioc->add_chain = &mpt_add_chain; 2211 ioc->sg_addr_size = 4; 2212 } 2213 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size; 2214 2215 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n", 2216 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT), 2217 CHIPREG_READ32(&ioc->chip->Doorbell)); 2218 2219 /* 2220 * Errata workaround for SAS pci express: 2221 * Upon returning to the D0 state, the contents of the doorbell will be 2222 * stale data, and this will incorrectly signal to the host driver that 2223 * the firmware is ready to process mpt commands. The workaround is 2224 * to issue a diagnostic reset. 2225 */ 2226 if (ioc->bus_type == SAS && (pdev->device == 2227 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device == 2228 MPI_MANUFACTPAGE_DEVID_SAS1064E)) { 2229 if (KickStart(ioc, 1, CAN_SLEEP) < 0) { 2230 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n", 2231 ioc->name); 2232 goto out; 2233 } 2234 } 2235 2236 /* bring ioc to operational state */ 2237 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name); 2238 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP, 2239 CAN_SLEEP); 2240 if (recovery_state != 0) 2241 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, " 2242 "error:[%x]\n", ioc->name, recovery_state); 2243 else 2244 printk(MYIOC_s_INFO_FMT 2245 "pci-resume: success\n", ioc->name); 2246 out: 2247 return 0; 2248 2249 } 2250 #endif 2251 2252 static int 2253 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase) 2254 { 2255 if ((MptDriverClass[index] == MPTSPI_DRIVER && 2256 ioc->bus_type != SPI) || 2257 (MptDriverClass[index] == MPTFC_DRIVER && 2258 ioc->bus_type != FC) || 2259 (MptDriverClass[index] == MPTSAS_DRIVER && 2260 ioc->bus_type != SAS)) 2261 /* make sure we only call the relevant reset handler 2262 * for the bus */ 2263 return 0; 2264 return (MptResetHandlers[index])(ioc, reset_phase); 2265 } 2266 2267 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2268 /** 2269 * mpt_do_ioc_recovery - Initialize or recover MPT adapter. 2270 * @ioc: Pointer to MPT adapter structure 2271 * @reason: Event word / reason 2272 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay. 2273 * 2274 * This routine performs all the steps necessary to bring the IOC 2275 * to a OPERATIONAL state. 2276 * 2277 * This routine also pre-fetches the LAN MAC address of a Fibre Channel 2278 * MPT adapter. 2279 * 2280 * Returns: 2281 * 0 for success 2282 * -1 if failed to get board READY 2283 * -2 if READY but IOCFacts Failed 2284 * -3 if READY but PrimeIOCFifos Failed 2285 * -4 if READY but IOCInit Failed 2286 * -5 if failed to enable_device and/or request_selected_regions 2287 * -6 if failed to upload firmware 2288 */ 2289 static int 2290 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) 2291 { 2292 int hard_reset_done = 0; 2293 int alt_ioc_ready = 0; 2294 int hard; 2295 int rc=0; 2296 int ii; 2297 int ret = 0; 2298 int reset_alt_ioc_active = 0; 2299 int irq_allocated = 0; 2300 u8 *a; 2301 2302 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name, 2303 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery"); 2304 2305 /* Disable reply interrupts (also blocks FreeQ) */ 2306 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2307 ioc->active = 0; 2308 2309 if (ioc->alt_ioc) { 2310 if (ioc->alt_ioc->active || 2311 reason == MPT_HOSTEVENT_IOC_RECOVER) { 2312 reset_alt_ioc_active = 1; 2313 /* Disable alt-IOC's reply interrupts 2314 * (and FreeQ) for a bit 2315 **/ 2316 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2317 0xFFFFFFFF); 2318 ioc->alt_ioc->active = 0; 2319 } 2320 } 2321 2322 hard = 1; 2323 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) 2324 hard = 0; 2325 2326 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) { 2327 if (hard_reset_done == -4) { 2328 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n", 2329 ioc->name); 2330 2331 if (reset_alt_ioc_active && ioc->alt_ioc) { 2332 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */ 2333 dprintk(ioc, printk(MYIOC_s_INFO_FMT 2334 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name)); 2335 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM); 2336 ioc->alt_ioc->active = 1; 2337 } 2338 2339 } else { 2340 printk(MYIOC_s_WARN_FMT 2341 "NOT READY WARNING!\n", ioc->name); 2342 } 2343 ret = -1; 2344 goto out; 2345 } 2346 2347 /* hard_reset_done = 0 if a soft reset was performed 2348 * and 1 if a hard reset was performed. 2349 */ 2350 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) { 2351 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0) 2352 alt_ioc_ready = 1; 2353 else 2354 printk(MYIOC_s_WARN_FMT 2355 ": alt-ioc Not ready WARNING!\n", 2356 ioc->alt_ioc->name); 2357 } 2358 2359 for (ii=0; ii<5; ii++) { 2360 /* Get IOC facts! Allow 5 retries */ 2361 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0) 2362 break; 2363 } 2364 2365 2366 if (ii == 5) { 2367 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2368 "Retry IocFacts failed rc=%x\n", ioc->name, rc)); 2369 ret = -2; 2370 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2371 MptDisplayIocCapabilities(ioc); 2372 } 2373 2374 if (alt_ioc_ready) { 2375 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) { 2376 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2377 "Initial Alt IocFacts failed rc=%x\n", 2378 ioc->name, rc)); 2379 /* Retry - alt IOC was initialized once 2380 */ 2381 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason); 2382 } 2383 if (rc) { 2384 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2385 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc)); 2386 alt_ioc_ready = 0; 2387 reset_alt_ioc_active = 0; 2388 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 2389 MptDisplayIocCapabilities(ioc->alt_ioc); 2390 } 2391 } 2392 2393 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) && 2394 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) { 2395 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2396 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM | 2397 IORESOURCE_IO); 2398 if (pci_enable_device(ioc->pcidev)) 2399 return -5; 2400 if (pci_request_selected_regions(ioc->pcidev, ioc->bars, 2401 "mpt")) 2402 return -5; 2403 } 2404 2405 /* 2406 * Device is reset now. It must have de-asserted the interrupt line 2407 * (if it was asserted) and it should be safe to register for the 2408 * interrupt now. 2409 */ 2410 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2411 ioc->pci_irq = -1; 2412 if (ioc->pcidev->irq) { 2413 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev)) 2414 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", 2415 ioc->name); 2416 else 2417 ioc->msi_enable = 0; 2418 rc = request_irq(ioc->pcidev->irq, mpt_interrupt, 2419 IRQF_SHARED, ioc->name, ioc); 2420 if (rc < 0) { 2421 printk(MYIOC_s_ERR_FMT "Unable to allocate " 2422 "interrupt %d!\n", 2423 ioc->name, ioc->pcidev->irq); 2424 if (ioc->msi_enable) 2425 pci_disable_msi(ioc->pcidev); 2426 ret = -EBUSY; 2427 goto out; 2428 } 2429 irq_allocated = 1; 2430 ioc->pci_irq = ioc->pcidev->irq; 2431 pci_set_master(ioc->pcidev); /* ?? */ 2432 pci_set_drvdata(ioc->pcidev, ioc); 2433 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2434 "installed at interrupt %d\n", ioc->name, 2435 ioc->pcidev->irq)); 2436 } 2437 } 2438 2439 /* Prime reply & request queues! 2440 * (mucho alloc's) Must be done prior to 2441 * init as upper addresses are needed for init. 2442 * If fails, continue with alt-ioc processing 2443 */ 2444 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n", 2445 ioc->name)); 2446 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0)) 2447 ret = -3; 2448 2449 /* May need to check/upload firmware & data here! 2450 * If fails, continue with alt-ioc processing 2451 */ 2452 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n", 2453 ioc->name)); 2454 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0)) 2455 ret = -4; 2456 // NEW! 2457 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) { 2458 printk(MYIOC_s_WARN_FMT 2459 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n", 2460 ioc->alt_ioc->name, rc); 2461 alt_ioc_ready = 0; 2462 reset_alt_ioc_active = 0; 2463 } 2464 2465 if (alt_ioc_ready) { 2466 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) { 2467 alt_ioc_ready = 0; 2468 reset_alt_ioc_active = 0; 2469 printk(MYIOC_s_WARN_FMT 2470 ": alt-ioc: (%d) init failure WARNING!\n", 2471 ioc->alt_ioc->name, rc); 2472 } 2473 } 2474 2475 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){ 2476 if (ioc->upload_fw) { 2477 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2478 "firmware upload required!\n", ioc->name)); 2479 2480 /* Controller is not operational, cannot do upload 2481 */ 2482 if (ret == 0) { 2483 rc = mpt_do_upload(ioc, sleepFlag); 2484 if (rc == 0) { 2485 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 2486 /* 2487 * Maintain only one pointer to FW memory 2488 * so there will not be two attempt to 2489 * downloadboot onboard dual function 2490 * chips (mpt_adapter_disable, 2491 * mpt_diag_reset) 2492 */ 2493 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2494 "mpt_upload: alt_%s has cached_fw=%p \n", 2495 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); 2496 ioc->cached_fw = NULL; 2497 } 2498 } else { 2499 printk(MYIOC_s_WARN_FMT 2500 "firmware upload failure!\n", ioc->name); 2501 ret = -6; 2502 } 2503 } 2504 } 2505 } 2506 2507 /* Enable MPT base driver management of EventNotification 2508 * and EventAck handling. 2509 */ 2510 if ((ret == 0) && (!ioc->facts.EventState)) { 2511 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2512 "SendEventNotification\n", 2513 ioc->name)); 2514 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */ 2515 } 2516 2517 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState) 2518 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag); 2519 2520 if (ret == 0) { 2521 /* Enable! (reply interrupt) */ 2522 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 2523 ioc->active = 1; 2524 } 2525 if (rc == 0) { /* alt ioc */ 2526 if (reset_alt_ioc_active && ioc->alt_ioc) { 2527 /* (re)Enable alt-IOC! (reply interrupt) */ 2528 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc" 2529 "reply irq re-enabled\n", 2530 ioc->alt_ioc->name)); 2531 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 2532 MPI_HIM_DIM); 2533 ioc->alt_ioc->active = 1; 2534 } 2535 } 2536 2537 2538 /* Add additional "reason" check before call to GetLanConfigPages 2539 * (combined with GetIoUnitPage2 call). This prevents a somewhat 2540 * recursive scenario; GetLanConfigPages times out, timer expired 2541 * routine calls HardResetHandler, which calls into here again, 2542 * and we try GetLanConfigPages again... 2543 */ 2544 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { 2545 2546 /* 2547 * Initialize link list for inactive raid volumes. 2548 */ 2549 mutex_init(&ioc->raid_data.inactive_list_mutex); 2550 INIT_LIST_HEAD(&ioc->raid_data.inactive_list); 2551 2552 switch (ioc->bus_type) { 2553 2554 case SAS: 2555 /* clear persistency table */ 2556 if(ioc->facts.IOCExceptions & 2557 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) { 2558 ret = mptbase_sas_persist_operation(ioc, 2559 MPI_SAS_OP_CLEAR_NOT_PRESENT); 2560 if(ret != 0) 2561 goto out; 2562 } 2563 2564 /* Find IM volumes 2565 */ 2566 mpt_findImVolumes(ioc); 2567 2568 /* Check, and possibly reset, the coalescing value 2569 */ 2570 mpt_read_ioc_pg_1(ioc); 2571 2572 break; 2573 2574 case FC: 2575 if ((ioc->pfacts[0].ProtocolFlags & 2576 MPI_PORTFACTS_PROTOCOL_LAN) && 2577 (ioc->lan_cnfg_page0.Header.PageLength == 0)) { 2578 /* 2579 * Pre-fetch the ports LAN MAC address! 2580 * (LANPage1_t stuff) 2581 */ 2582 (void) GetLanConfigPages(ioc); 2583 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 2584 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2585 "LanAddr = %pMR\n", ioc->name, a)); 2586 } 2587 break; 2588 2589 case SPI: 2590 /* Get NVRAM and adapter maximums from SPP 0 and 2 2591 */ 2592 mpt_GetScsiPortSettings(ioc, 0); 2593 2594 /* Get version and length of SDP 1 2595 */ 2596 mpt_readScsiDevicePageHeaders(ioc, 0); 2597 2598 /* Find IM volumes 2599 */ 2600 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02) 2601 mpt_findImVolumes(ioc); 2602 2603 /* Check, and possibly reset, the coalescing value 2604 */ 2605 mpt_read_ioc_pg_1(ioc); 2606 2607 mpt_read_ioc_pg_4(ioc); 2608 2609 break; 2610 } 2611 2612 GetIoUnitPage2(ioc); 2613 mpt_get_manufacturing_pg_0(ioc); 2614 } 2615 2616 out: 2617 if ((ret != 0) && irq_allocated) { 2618 free_irq(ioc->pci_irq, ioc); 2619 if (ioc->msi_enable) 2620 pci_disable_msi(ioc->pcidev); 2621 } 2622 return ret; 2623 } 2624 2625 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2626 /** 2627 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function 2628 * @ioc: Pointer to MPT adapter structure 2629 * @pdev: Pointer to (struct pci_dev) structure 2630 * 2631 * Search for PCI bus/dev_function which matches 2632 * PCI bus/dev_function (+/-1) for newly discovered 929, 2633 * 929X, 1030 or 1035. 2634 * 2635 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters 2636 * using alt_ioc pointer fields in their %MPT_ADAPTER structures. 2637 */ 2638 static void 2639 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev) 2640 { 2641 struct pci_dev *peer=NULL; 2642 unsigned int slot = PCI_SLOT(pdev->devfn); 2643 unsigned int func = PCI_FUNC(pdev->devfn); 2644 MPT_ADAPTER *ioc_srch; 2645 2646 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x," 2647 " searching for devfn match on %x or %x\n", 2648 ioc->name, pci_name(pdev), pdev->bus->number, 2649 pdev->devfn, func-1, func+1)); 2650 2651 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1)); 2652 if (!peer) { 2653 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1)); 2654 if (!peer) 2655 return; 2656 } 2657 2658 list_for_each_entry(ioc_srch, &ioc_list, list) { 2659 struct pci_dev *_pcidev = ioc_srch->pcidev; 2660 if (_pcidev == peer) { 2661 /* Paranoia checks */ 2662 if (ioc->alt_ioc != NULL) { 2663 printk(MYIOC_s_WARN_FMT 2664 "Oops, already bound (%s <==> %s)!\n", 2665 ioc->name, ioc->name, ioc->alt_ioc->name); 2666 break; 2667 } else if (ioc_srch->alt_ioc != NULL) { 2668 printk(MYIOC_s_WARN_FMT 2669 "Oops, already bound (%s <==> %s)!\n", 2670 ioc_srch->name, ioc_srch->name, 2671 ioc_srch->alt_ioc->name); 2672 break; 2673 } 2674 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2675 "FOUND! binding %s <==> %s\n", 2676 ioc->name, ioc->name, ioc_srch->name)); 2677 ioc_srch->alt_ioc = ioc; 2678 ioc->alt_ioc = ioc_srch; 2679 } 2680 } 2681 pci_dev_put(peer); 2682 } 2683 2684 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2685 /** 2686 * mpt_adapter_disable - Disable misbehaving MPT adapter. 2687 * @ioc: Pointer to MPT adapter structure 2688 */ 2689 static void 2690 mpt_adapter_disable(MPT_ADAPTER *ioc) 2691 { 2692 int sz; 2693 int ret; 2694 2695 if (ioc->cached_fw != NULL) { 2696 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2697 "%s: Pushing FW onto adapter\n", __func__, ioc->name)); 2698 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) 2699 ioc->cached_fw, CAN_SLEEP)) < 0) { 2700 printk(MYIOC_s_WARN_FMT 2701 ": firmware downloadboot failure (%d)!\n", 2702 ioc->name, ret); 2703 } 2704 } 2705 2706 /* 2707 * Put the controller into ready state (if its not already) 2708 */ 2709 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) { 2710 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, 2711 CAN_SLEEP)) { 2712 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) 2713 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit " 2714 "reset failed to put ioc in ready state!\n", 2715 ioc->name, __func__); 2716 } else 2717 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset " 2718 "failed!\n", ioc->name, __func__); 2719 } 2720 2721 2722 /* Disable adapter interrupts! */ 2723 synchronize_irq(ioc->pcidev->irq); 2724 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 2725 ioc->active = 0; 2726 2727 /* Clear any lingering interrupt */ 2728 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 2729 CHIPREG_READ32(&ioc->chip->IntStatus); 2730 2731 if (ioc->alloc != NULL) { 2732 sz = ioc->alloc_sz; 2733 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n", 2734 ioc->name, ioc->alloc, ioc->alloc_sz)); 2735 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, 2736 ioc->alloc_dma); 2737 ioc->reply_frames = NULL; 2738 ioc->req_frames = NULL; 2739 ioc->alloc = NULL; 2740 ioc->alloc_total -= sz; 2741 } 2742 2743 if (ioc->sense_buf_pool != NULL) { 2744 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 2745 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, 2746 ioc->sense_buf_pool_dma); 2747 ioc->sense_buf_pool = NULL; 2748 ioc->alloc_total -= sz; 2749 } 2750 2751 if (ioc->events != NULL){ 2752 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS); 2753 kfree(ioc->events); 2754 ioc->events = NULL; 2755 ioc->alloc_total -= sz; 2756 } 2757 2758 mpt_free_fw_memory(ioc); 2759 2760 kfree(ioc->spi_data.nvram); 2761 mpt_inactive_raid_list_free(ioc); 2762 kfree(ioc->raid_data.pIocPg2); 2763 kfree(ioc->raid_data.pIocPg3); 2764 ioc->spi_data.nvram = NULL; 2765 ioc->raid_data.pIocPg3 = NULL; 2766 2767 if (ioc->spi_data.pIocPg4 != NULL) { 2768 sz = ioc->spi_data.IocPg4Sz; 2769 dma_free_coherent(&ioc->pcidev->dev, sz, 2770 ioc->spi_data.pIocPg4, 2771 ioc->spi_data.IocPg4_dma); 2772 ioc->spi_data.pIocPg4 = NULL; 2773 ioc->alloc_total -= sz; 2774 } 2775 2776 if (ioc->ReqToChain != NULL) { 2777 kfree(ioc->ReqToChain); 2778 kfree(ioc->RequestNB); 2779 ioc->ReqToChain = NULL; 2780 } 2781 2782 kfree(ioc->ChainToChain); 2783 ioc->ChainToChain = NULL; 2784 2785 if (ioc->HostPageBuffer != NULL) { 2786 if((ret = mpt_host_page_access_control(ioc, 2787 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) { 2788 printk(MYIOC_s_ERR_FMT 2789 ": %s: host page buffers free failed (%d)!\n", 2790 ioc->name, __func__, ret); 2791 } 2792 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 2793 "HostPageBuffer free @ %p, sz=%d bytes\n", 2794 ioc->name, ioc->HostPageBuffer, 2795 ioc->HostPageBuffer_sz)); 2796 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz, 2797 ioc->HostPageBuffer, ioc->HostPageBuffer_dma); 2798 ioc->HostPageBuffer = NULL; 2799 ioc->HostPageBuffer_sz = 0; 2800 ioc->alloc_total -= ioc->HostPageBuffer_sz; 2801 } 2802 2803 pci_set_drvdata(ioc->pcidev, NULL); 2804 } 2805 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2806 /** 2807 * mpt_adapter_dispose - Free all resources associated with an MPT adapter 2808 * @ioc: Pointer to MPT adapter structure 2809 * 2810 * This routine unregisters h/w resources and frees all alloc'd memory 2811 * associated with a MPT adapter structure. 2812 */ 2813 static void 2814 mpt_adapter_dispose(MPT_ADAPTER *ioc) 2815 { 2816 int sz_first, sz_last; 2817 2818 if (ioc == NULL) 2819 return; 2820 2821 sz_first = ioc->alloc_total; 2822 2823 mpt_adapter_disable(ioc); 2824 2825 if (ioc->pci_irq != -1) { 2826 free_irq(ioc->pci_irq, ioc); 2827 if (ioc->msi_enable) 2828 pci_disable_msi(ioc->pcidev); 2829 ioc->pci_irq = -1; 2830 } 2831 2832 if (ioc->memmap != NULL) { 2833 iounmap(ioc->memmap); 2834 ioc->memmap = NULL; 2835 } 2836 2837 pci_disable_device(ioc->pcidev); 2838 pci_release_selected_regions(ioc->pcidev, ioc->bars); 2839 2840 /* Zap the adapter lookup ptr! */ 2841 list_del(&ioc->list); 2842 2843 sz_last = ioc->alloc_total; 2844 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n", 2845 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first)); 2846 2847 if (ioc->alt_ioc) 2848 ioc->alt_ioc->alt_ioc = NULL; 2849 2850 kfree(ioc); 2851 } 2852 2853 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2854 /** 2855 * MptDisplayIocCapabilities - Disply IOC's capabilities. 2856 * @ioc: Pointer to MPT adapter structure 2857 */ 2858 static void 2859 MptDisplayIocCapabilities(MPT_ADAPTER *ioc) 2860 { 2861 int i = 0; 2862 2863 printk(KERN_INFO "%s: ", ioc->name); 2864 if (ioc->prod_name) 2865 pr_cont("%s: ", ioc->prod_name); 2866 pr_cont("Capabilities={"); 2867 2868 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) { 2869 pr_cont("Initiator"); 2870 i++; 2871 } 2872 2873 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2874 pr_cont("%sTarget", i ? "," : ""); 2875 i++; 2876 } 2877 2878 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 2879 pr_cont("%sLAN", i ? "," : ""); 2880 i++; 2881 } 2882 2883 #if 0 2884 /* 2885 * This would probably evoke more questions than it's worth 2886 */ 2887 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) { 2888 pr_cont("%sLogBusAddr", i ? "," : ""); 2889 i++; 2890 } 2891 #endif 2892 2893 pr_cont("}\n"); 2894 } 2895 2896 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 2897 /** 2898 * MakeIocReady - Get IOC to a READY state, using KickStart if needed. 2899 * @ioc: Pointer to MPT_ADAPTER structure 2900 * @force: Force hard KickStart of IOC 2901 * @sleepFlag: Specifies whether the process can sleep 2902 * 2903 * Returns: 2904 * 1 - DIAG reset and READY 2905 * 0 - READY initially OR soft reset and READY 2906 * -1 - Any failure on KickStart 2907 * -2 - Msg Unit Reset Failed 2908 * -3 - IO Unit Reset Failed 2909 * -4 - IOC owned by a PEER 2910 */ 2911 static int 2912 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag) 2913 { 2914 u32 ioc_state; 2915 int statefault = 0; 2916 int cntdn; 2917 int hard_reset_done = 0; 2918 int r; 2919 int ii; 2920 int whoinit; 2921 2922 /* Get current [raw] IOC state */ 2923 ioc_state = mpt_GetIocState(ioc, 0); 2924 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state)); 2925 2926 /* 2927 * Check to see if IOC got left/stuck in doorbell handshake 2928 * grip of death. If so, hard reset the IOC. 2929 */ 2930 if (ioc_state & MPI_DOORBELL_ACTIVE) { 2931 statefault = 1; 2932 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n", 2933 ioc->name); 2934 } 2935 2936 /* Is it already READY? */ 2937 if (!statefault && 2938 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) { 2939 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2940 "IOC is in READY state\n", ioc->name)); 2941 return 0; 2942 } 2943 2944 /* 2945 * Check to see if IOC is in FAULT state. 2946 */ 2947 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 2948 statefault = 2; 2949 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n", 2950 ioc->name); 2951 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n", 2952 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK); 2953 } 2954 2955 /* 2956 * Hmmm... Did it get left operational? 2957 */ 2958 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) { 2959 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n", 2960 ioc->name)); 2961 2962 /* Check WhoInit. 2963 * If PCI Peer, exit. 2964 * Else, if no fault conditions are present, issue a MessageUnitReset 2965 * Else, fall through to KickStart case 2966 */ 2967 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT; 2968 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT 2969 "whoinit 0x%x statefault %d force %d\n", 2970 ioc->name, whoinit, statefault, force)); 2971 if (whoinit == MPI_WHOINIT_PCI_PEER) 2972 return -4; 2973 else { 2974 if ((statefault == 0 ) && (force == 0)) { 2975 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0) 2976 return 0; 2977 } 2978 statefault = 3; 2979 } 2980 } 2981 2982 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag); 2983 if (hard_reset_done < 0) 2984 return -1; 2985 2986 /* 2987 * Loop here waiting for IOC to come READY. 2988 */ 2989 ii = 0; 2990 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */ 2991 2992 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 2993 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) { 2994 /* 2995 * BIOS or previous driver load left IOC in OP state. 2996 * Reset messaging FIFOs. 2997 */ 2998 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) { 2999 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name); 3000 return -2; 3001 } 3002 } else if (ioc_state == MPI_IOC_STATE_RESET) { 3003 /* 3004 * Something is wrong. Try to get IOC back 3005 * to a known state. 3006 */ 3007 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) { 3008 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name); 3009 return -3; 3010 } 3011 } 3012 3013 ii++; cntdn--; 3014 if (!cntdn) { 3015 printk(MYIOC_s_ERR_FMT 3016 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 3017 ioc->name, ioc_state, (int)((ii+5)/HZ)); 3018 return -ETIME; 3019 } 3020 3021 if (sleepFlag == CAN_SLEEP) { 3022 msleep(1); 3023 } else { 3024 mdelay (1); /* 1 msec delay */ 3025 } 3026 3027 } 3028 3029 if (statefault < 3) { 3030 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name, 3031 statefault == 1 ? "stuck handshake" : "IOC FAULT"); 3032 } 3033 3034 return hard_reset_done; 3035 } 3036 3037 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3038 /** 3039 * mpt_GetIocState - Get the current state of a MPT adapter. 3040 * @ioc: Pointer to MPT_ADAPTER structure 3041 * @cooked: Request raw or cooked IOC state 3042 * 3043 * Returns all IOC Doorbell register bits if cooked==0, else just the 3044 * Doorbell bits in MPI_IOC_STATE_MASK. 3045 */ 3046 u32 3047 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked) 3048 { 3049 u32 s, sc; 3050 3051 /* Get! */ 3052 s = CHIPREG_READ32(&ioc->chip->Doorbell); 3053 sc = s & MPI_IOC_STATE_MASK; 3054 3055 /* Save! */ 3056 ioc->last_state = sc; 3057 3058 return cooked ? sc : s; 3059 } 3060 3061 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3062 /** 3063 * GetIocFacts - Send IOCFacts request to MPT adapter. 3064 * @ioc: Pointer to MPT_ADAPTER structure 3065 * @sleepFlag: Specifies whether the process can sleep 3066 * @reason: If recovery, only update facts. 3067 * 3068 * Returns 0 for success, non-zero for failure. 3069 */ 3070 static int 3071 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason) 3072 { 3073 IOCFacts_t get_facts; 3074 IOCFactsReply_t *facts; 3075 int r; 3076 int req_sz; 3077 int reply_sz; 3078 int sz; 3079 u32 vv; 3080 u8 shiftFactor=1; 3081 3082 /* IOC *must* NOT be in RESET state! */ 3083 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3084 printk(KERN_ERR MYNAM 3085 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n", 3086 ioc->name, ioc->last_state); 3087 return -44; 3088 } 3089 3090 facts = &ioc->facts; 3091 3092 /* Destination (reply area)... */ 3093 reply_sz = sizeof(*facts); 3094 memset(facts, 0, reply_sz); 3095 3096 /* Request area (get_facts on the stack right now!) */ 3097 req_sz = sizeof(get_facts); 3098 memset(&get_facts, 0, req_sz); 3099 3100 get_facts.Function = MPI_FUNCTION_IOC_FACTS; 3101 /* Assert: All other get_facts fields are zero! */ 3102 3103 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3104 "Sending get IocFacts request req_sz=%d reply_sz=%d\n", 3105 ioc->name, req_sz, reply_sz)); 3106 3107 /* No non-zero fields in the get_facts request are greater than 3108 * 1 byte in size, so we can just fire it off as is. 3109 */ 3110 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts, 3111 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag); 3112 if (r != 0) 3113 return r; 3114 3115 /* 3116 * Now byte swap (GRRR) the necessary fields before any further 3117 * inspection of reply contents. 3118 * 3119 * But need to do some sanity checks on MsgLength (byte) field 3120 * to make sure we don't zero IOC's req_sz! 3121 */ 3122 /* Did we get a valid reply? */ 3123 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) { 3124 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3125 /* 3126 * If not been here, done that, save off first WhoInit value 3127 */ 3128 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN) 3129 ioc->FirstWhoInit = facts->WhoInit; 3130 } 3131 3132 facts->MsgVersion = le16_to_cpu(facts->MsgVersion); 3133 facts->MsgContext = le32_to_cpu(facts->MsgContext); 3134 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions); 3135 facts->IOCStatus = le16_to_cpu(facts->IOCStatus); 3136 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo); 3137 /* CHECKME! IOCStatus, IOCLogInfo */ 3138 3139 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth); 3140 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize); 3141 3142 /* 3143 * FC f/w version changed between 1.1 and 1.2 3144 * Old: u16{Major(4),Minor(4),SubMinor(8)} 3145 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)} 3146 */ 3147 if (facts->MsgVersion < MPI_VERSION_01_02) { 3148 /* 3149 * Handle old FC f/w style, convert to new... 3150 */ 3151 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion); 3152 facts->FWVersion.Word = 3153 ((oldv<<12) & 0xFF000000) | 3154 ((oldv<<8) & 0x000FFF00); 3155 } else 3156 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word); 3157 3158 facts->ProductID = le16_to_cpu(facts->ProductID); 3159 3160 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK) 3161 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI) 3162 ioc->ir_firmware = 1; 3163 3164 facts->CurrentHostMfaHighAddr = 3165 le32_to_cpu(facts->CurrentHostMfaHighAddr); 3166 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits); 3167 facts->CurrentSenseBufferHighAddr = 3168 le32_to_cpu(facts->CurrentSenseBufferHighAddr); 3169 facts->CurReplyFrameSize = 3170 le16_to_cpu(facts->CurReplyFrameSize); 3171 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities); 3172 3173 /* 3174 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx 3175 * Older MPI-1.00.xx struct had 13 dwords, and enlarged 3176 * to 14 in MPI-1.01.0x. 3177 */ 3178 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 && 3179 facts->MsgVersion > MPI_VERSION_01_00) { 3180 facts->FWImageSize = le32_to_cpu(facts->FWImageSize); 3181 } 3182 3183 facts->FWImageSize = ALIGN(facts->FWImageSize, 4); 3184 3185 if (!facts->RequestFrameSize) { 3186 /* Something is wrong! */ 3187 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n", 3188 ioc->name); 3189 return -55; 3190 } 3191 3192 r = sz = facts->BlockSize; 3193 vv = ((63 / (sz * 4)) + 1) & 0x03; 3194 ioc->NB_for_64_byte_frame = vv; 3195 while ( sz ) 3196 { 3197 shiftFactor++; 3198 sz = sz >> 1; 3199 } 3200 ioc->NBShiftFactor = shiftFactor; 3201 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3202 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n", 3203 ioc->name, vv, shiftFactor, r)); 3204 3205 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) { 3206 /* 3207 * Set values for this IOC's request & reply frame sizes, 3208 * and request & reply queue depths... 3209 */ 3210 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4); 3211 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits); 3212 ioc->reply_sz = MPT_REPLY_FRAME_SIZE; 3213 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth); 3214 3215 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n", 3216 ioc->name, ioc->reply_sz, ioc->reply_depth)); 3217 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n", 3218 ioc->name, ioc->req_sz, ioc->req_depth)); 3219 3220 /* Get port facts! */ 3221 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 ) 3222 return r; 3223 } 3224 } else { 3225 printk(MYIOC_s_ERR_FMT 3226 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n", 3227 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t, 3228 RequestFrameSize)/sizeof(u32))); 3229 return -66; 3230 } 3231 3232 return 0; 3233 } 3234 3235 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3236 /** 3237 * GetPortFacts - Send PortFacts request to MPT adapter. 3238 * @ioc: Pointer to MPT_ADAPTER structure 3239 * @portnum: Port number 3240 * @sleepFlag: Specifies whether the process can sleep 3241 * 3242 * Returns 0 for success, non-zero for failure. 3243 */ 3244 static int 3245 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3246 { 3247 PortFacts_t get_pfacts; 3248 PortFactsReply_t *pfacts; 3249 int ii; 3250 int req_sz; 3251 int reply_sz; 3252 int max_id; 3253 3254 /* IOC *must* NOT be in RESET state! */ 3255 if (ioc->last_state == MPI_IOC_STATE_RESET) { 3256 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n", 3257 ioc->name, ioc->last_state ); 3258 return -4; 3259 } 3260 3261 pfacts = &ioc->pfacts[portnum]; 3262 3263 /* Destination (reply area)... */ 3264 reply_sz = sizeof(*pfacts); 3265 memset(pfacts, 0, reply_sz); 3266 3267 /* Request area (get_pfacts on the stack right now!) */ 3268 req_sz = sizeof(get_pfacts); 3269 memset(&get_pfacts, 0, req_sz); 3270 3271 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS; 3272 get_pfacts.PortNumber = portnum; 3273 /* Assert: All other get_pfacts fields are zero! */ 3274 3275 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n", 3276 ioc->name, portnum)); 3277 3278 /* No non-zero fields in the get_pfacts request are greater than 3279 * 1 byte in size, so we can just fire it off as is. 3280 */ 3281 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts, 3282 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag); 3283 if (ii != 0) 3284 return ii; 3285 3286 /* Did we get a valid reply? */ 3287 3288 /* Now byte swap the necessary fields in the response. */ 3289 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext); 3290 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus); 3291 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo); 3292 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices); 3293 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID); 3294 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags); 3295 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers); 3296 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs); 3297 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets); 3298 3299 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID : 3300 pfacts->MaxDevices; 3301 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id; 3302 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256; 3303 3304 /* 3305 * Place all the devices on channels 3306 * 3307 * (for debuging) 3308 */ 3309 if (mpt_channel_mapping) { 3310 ioc->devices_per_bus = 1; 3311 ioc->number_of_buses = (max_id > 255) ? 255 : max_id; 3312 } 3313 3314 return 0; 3315 } 3316 3317 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3318 /** 3319 * SendIocInit - Send IOCInit request to MPT adapter. 3320 * @ioc: Pointer to MPT_ADAPTER structure 3321 * @sleepFlag: Specifies whether the process can sleep 3322 * 3323 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state. 3324 * 3325 * Returns 0 for success, non-zero for failure. 3326 */ 3327 static int 3328 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag) 3329 { 3330 IOCInit_t ioc_init; 3331 MPIDefaultReply_t init_reply; 3332 u32 state; 3333 int r; 3334 int count; 3335 int cntdn; 3336 3337 memset(&ioc_init, 0, sizeof(ioc_init)); 3338 memset(&init_reply, 0, sizeof(init_reply)); 3339 3340 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER; 3341 ioc_init.Function = MPI_FUNCTION_IOC_INIT; 3342 3343 /* If we are in a recovery mode and we uploaded the FW image, 3344 * then this pointer is not NULL. Skip the upload a second time. 3345 * Set this flag if cached_fw set for either IOC. 3346 */ 3347 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 3348 ioc->upload_fw = 1; 3349 else 3350 ioc->upload_fw = 0; 3351 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n", 3352 ioc->name, ioc->upload_fw, ioc->facts.Flags)); 3353 3354 ioc_init.MaxDevices = (U8)ioc->devices_per_bus; 3355 ioc_init.MaxBuses = (U8)ioc->number_of_buses; 3356 3357 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n", 3358 ioc->name, ioc->facts.MsgVersion)); 3359 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) { 3360 // set MsgVersion and HeaderVersion host driver was built with 3361 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION); 3362 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION); 3363 3364 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) { 3365 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE; 3366 } else if(mpt_host_page_alloc(ioc, &ioc_init)) 3367 return -99; 3368 } 3369 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */ 3370 3371 if (ioc->sg_addr_size == sizeof(u64)) { 3372 /* Save the upper 32-bits of the request 3373 * (reply) and sense buffers. 3374 */ 3375 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32)); 3376 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32)); 3377 } else { 3378 /* Force 32-bit addressing */ 3379 ioc_init.HostMfaHighAddr = cpu_to_le32(0); 3380 ioc_init.SenseBufferHighAddr = cpu_to_le32(0); 3381 } 3382 3383 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr; 3384 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr; 3385 ioc->facts.MaxDevices = ioc_init.MaxDevices; 3386 ioc->facts.MaxBuses = ioc_init.MaxBuses; 3387 3388 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n", 3389 ioc->name, &ioc_init)); 3390 3391 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init, 3392 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag); 3393 if (r != 0) { 3394 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r); 3395 return r; 3396 } 3397 3398 /* No need to byte swap the multibyte fields in the reply 3399 * since we don't even look at its contents. 3400 */ 3401 3402 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n", 3403 ioc->name, &ioc_init)); 3404 3405 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) { 3406 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r); 3407 return r; 3408 } 3409 3410 /* YIKES! SUPER IMPORTANT!!! 3411 * Poll IocState until _OPERATIONAL while IOC is doing 3412 * LoopInit and TargetDiscovery! 3413 */ 3414 count = 0; 3415 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */ 3416 state = mpt_GetIocState(ioc, 1); 3417 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) { 3418 if (sleepFlag == CAN_SLEEP) { 3419 msleep(1); 3420 } else { 3421 mdelay(1); 3422 } 3423 3424 if (!cntdn) { 3425 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n", 3426 ioc->name, (int)((count+5)/HZ)); 3427 return -9; 3428 } 3429 3430 state = mpt_GetIocState(ioc, 1); 3431 count++; 3432 } 3433 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n", 3434 ioc->name, count)); 3435 3436 ioc->aen_event_read_flag=0; 3437 return r; 3438 } 3439 3440 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3441 /** 3442 * SendPortEnable - Send PortEnable request to MPT adapter port. 3443 * @ioc: Pointer to MPT_ADAPTER structure 3444 * @portnum: Port number to enable 3445 * @sleepFlag: Specifies whether the process can sleep 3446 * 3447 * Send PortEnable to bring IOC to OPERATIONAL state. 3448 * 3449 * Returns 0 for success, non-zero for failure. 3450 */ 3451 static int 3452 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) 3453 { 3454 PortEnable_t port_enable; 3455 MPIDefaultReply_t reply_buf; 3456 int rc; 3457 int req_sz; 3458 int reply_sz; 3459 3460 /* Destination... */ 3461 reply_sz = sizeof(MPIDefaultReply_t); 3462 memset(&reply_buf, 0, reply_sz); 3463 3464 req_sz = sizeof(PortEnable_t); 3465 memset(&port_enable, 0, req_sz); 3466 3467 port_enable.Function = MPI_FUNCTION_PORT_ENABLE; 3468 port_enable.PortNumber = portnum; 3469 /* port_enable.ChainOffset = 0; */ 3470 /* port_enable.MsgFlags = 0; */ 3471 /* port_enable.MsgContext = 0; */ 3472 3473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n", 3474 ioc->name, portnum, &port_enable)); 3475 3476 /* RAID FW may take a long time to enable 3477 */ 3478 if (ioc->ir_firmware || ioc->bus_type == SAS) { 3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3481 300 /*seconds*/, sleepFlag); 3482 } else { 3483 rc = mpt_handshake_req_reply_wait(ioc, req_sz, 3484 (u32*)&port_enable, reply_sz, (u16*)&reply_buf, 3485 30 /*seconds*/, sleepFlag); 3486 } 3487 return rc; 3488 } 3489 3490 /** 3491 * mpt_alloc_fw_memory - allocate firmware memory 3492 * @ioc: Pointer to MPT_ADAPTER structure 3493 * @size: total FW bytes 3494 * 3495 * If memory has already been allocated, the same (cached) value 3496 * is returned. 3497 * 3498 * Return 0 if successful, or non-zero for failure 3499 **/ 3500 int 3501 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) 3502 { 3503 int rc; 3504 3505 if (ioc->cached_fw) { 3506 rc = 0; /* use already allocated memory */ 3507 goto out; 3508 } 3509 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { 3510 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ 3511 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; 3512 rc = 0; 3513 goto out; 3514 } 3515 ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size, 3516 &ioc->cached_fw_dma, GFP_ATOMIC); 3517 if (!ioc->cached_fw) { 3518 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", 3519 ioc->name); 3520 rc = -1; 3521 } else { 3522 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", 3523 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); 3524 ioc->alloc_total += size; 3525 rc = 0; 3526 } 3527 out: 3528 return rc; 3529 } 3530 3531 /** 3532 * mpt_free_fw_memory - free firmware memory 3533 * @ioc: Pointer to MPT_ADAPTER structure 3534 * 3535 * If alt_img is NULL, delete from ioc structure. 3536 * Else, delete a secondary image in same format. 3537 **/ 3538 void 3539 mpt_free_fw_memory(MPT_ADAPTER *ioc) 3540 { 3541 int sz; 3542 3543 if (!ioc->cached_fw) 3544 return; 3545 3546 sz = ioc->facts.FWImageSize; 3547 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", 3548 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3549 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw, 3550 ioc->cached_fw_dma); 3551 ioc->alloc_total -= sz; 3552 ioc->cached_fw = NULL; 3553 } 3554 3555 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3556 /** 3557 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. 3558 * @ioc: Pointer to MPT_ADAPTER structure 3559 * @sleepFlag: Specifies whether the process can sleep 3560 * 3561 * Returns 0 for success, >0 for handshake failure 3562 * <0 for fw upload failure. 3563 * 3564 * Remark: If bound IOC and a successful FWUpload was performed 3565 * on the bound IOC, the second image is discarded 3566 * and memory is free'd. Both channels must upload to prevent 3567 * IOC from running in degraded mode. 3568 */ 3569 static int 3570 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) 3571 { 3572 u8 reply[sizeof(FWUploadReply_t)]; 3573 FWUpload_t *prequest; 3574 FWUploadReply_t *preply; 3575 FWUploadTCSGE_t *ptcsge; 3576 u32 flagsLength; 3577 int ii, sz, reply_sz; 3578 int cmdStatus; 3579 int request_size; 3580 /* If the image size is 0, we are done. 3581 */ 3582 if ((sz = ioc->facts.FWImageSize) == 0) 3583 return 0; 3584 3585 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) 3586 return -ENOMEM; 3587 3588 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", 3589 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); 3590 3591 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : 3592 kzalloc(ioc->req_sz, GFP_KERNEL); 3593 if (!prequest) { 3594 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed " 3595 "while allocating memory \n", ioc->name)); 3596 mpt_free_fw_memory(ioc); 3597 return -ENOMEM; 3598 } 3599 3600 preply = (FWUploadReply_t *)&reply; 3601 3602 reply_sz = sizeof(reply); 3603 memset(preply, 0, reply_sz); 3604 3605 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM; 3606 prequest->Function = MPI_FUNCTION_FW_UPLOAD; 3607 3608 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL; 3609 ptcsge->DetailsLength = 12; 3610 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT; 3611 ptcsge->ImageSize = cpu_to_le32(sz); 3612 ptcsge++; 3613 3614 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz; 3615 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma); 3616 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) + 3617 ioc->SGE_size; 3618 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload " 3619 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest, 3620 ioc->facts.FWImageSize, request_size)); 3621 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest); 3622 3623 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest, 3624 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag); 3625 3626 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed " 3627 "rc=%x \n", ioc->name, ii)); 3628 3629 cmdStatus = -EFAULT; 3630 if (ii == 0) { 3631 /* Handshake transfer was complete and successful. 3632 * Check the Reply Frame. 3633 */ 3634 int status; 3635 status = le16_to_cpu(preply->IOCStatus) & 3636 MPI_IOCSTATUS_MASK; 3637 if (status == MPI_IOCSTATUS_SUCCESS && 3638 ioc->facts.FWImageSize == 3639 le32_to_cpu(preply->ActualImageSize)) 3640 cmdStatus = 0; 3641 } 3642 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n", 3643 ioc->name, cmdStatus)); 3644 3645 3646 if (cmdStatus) { 3647 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, " 3648 "freeing image \n", ioc->name)); 3649 mpt_free_fw_memory(ioc); 3650 } 3651 kfree(prequest); 3652 3653 return cmdStatus; 3654 } 3655 3656 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3657 /** 3658 * mpt_downloadboot - DownloadBoot code 3659 * @ioc: Pointer to MPT_ADAPTER structure 3660 * @pFwHeader: Pointer to firmware header info 3661 * @sleepFlag: Specifies whether the process can sleep 3662 * 3663 * FwDownloadBoot requires Programmed IO access. 3664 * 3665 * Returns 0 for success 3666 * -1 FW Image size is 0 3667 * -2 No valid cached_fw Pointer 3668 * <0 for fw upload failure. 3669 */ 3670 static int 3671 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) 3672 { 3673 MpiExtImageHeader_t *pExtImage; 3674 u32 fwSize; 3675 u32 diag0val; 3676 int count; 3677 u32 *ptrFw; 3678 u32 diagRwData; 3679 u32 nextImage; 3680 u32 load_addr; 3681 u32 ioc_state=0; 3682 3683 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n", 3684 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader)); 3685 3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3688 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3691 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3692 3693 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM)); 3694 3695 /* wait 1 msec */ 3696 if (sleepFlag == CAN_SLEEP) { 3697 msleep(1); 3698 } else { 3699 mdelay (1); 3700 } 3701 3702 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3703 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 3704 3705 for (count = 0; count < 30; count ++) { 3706 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3707 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 3708 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n", 3709 ioc->name, count)); 3710 break; 3711 } 3712 /* wait .1 sec */ 3713 if (sleepFlag == CAN_SLEEP) { 3714 msleep (100); 3715 } else { 3716 mdelay (100); 3717 } 3718 } 3719 3720 if ( count == 30 ) { 3721 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! " 3722 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n", 3723 ioc->name, diag0val)); 3724 return -3; 3725 } 3726 3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 3729 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 3732 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 3733 3734 /* Set the DiagRwEn and Disable ARM bits */ 3735 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM)); 3736 3737 fwSize = (pFwHeader->ImageSize + 3)/4; 3738 ptrFw = (u32 *) pFwHeader; 3739 3740 /* Write the LoadStartAddress to the DiagRw Address Register 3741 * using Programmed IO 3742 */ 3743 if (ioc->errata_flag_1064) 3744 pci_enable_io_access(ioc->pcidev); 3745 3746 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress); 3747 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n", 3748 ioc->name, pFwHeader->LoadStartAddress)); 3749 3750 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n", 3751 ioc->name, fwSize*4, ptrFw)); 3752 while (fwSize--) { 3753 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3754 } 3755 3756 nextImage = pFwHeader->NextImageHeaderOffset; 3757 while (nextImage) { 3758 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage); 3759 3760 load_addr = pExtImage->LoadStartAddress; 3761 3762 fwSize = (pExtImage->ImageSize + 3) >> 2; 3763 ptrFw = (u32 *)pExtImage; 3764 3765 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n", 3766 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr)); 3767 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr); 3768 3769 while (fwSize--) { 3770 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++); 3771 } 3772 nextImage = pExtImage->NextImageHeaderOffset; 3773 } 3774 3775 /* Write the IopResetVectorRegAddr */ 3776 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr)); 3777 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr); 3778 3779 /* Write the IopResetVectorValue */ 3780 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue)); 3781 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue); 3782 3783 /* Clear the internal flash bad bit - autoincrementing register, 3784 * so must do two writes. 3785 */ 3786 if (ioc->bus_type == SPI) { 3787 /* 3788 * 1030 and 1035 H/W errata, workaround to access 3789 * the ClearFlashBadSignatureBit 3790 */ 3791 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3792 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData); 3793 diagRwData |= 0x40000000; 3794 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000); 3795 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData); 3796 3797 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ { 3798 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3799 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | 3800 MPI_DIAG_CLEAR_FLASH_BAD_SIG); 3801 3802 /* wait 1 msec */ 3803 if (sleepFlag == CAN_SLEEP) { 3804 msleep (1); 3805 } else { 3806 mdelay (1); 3807 } 3808 } 3809 3810 if (ioc->errata_flag_1064) 3811 pci_disable_io_access(ioc->pcidev); 3812 3813 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 3814 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, " 3815 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n", 3816 ioc->name, diag0val)); 3817 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE); 3818 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n", 3819 ioc->name, diag0val)); 3820 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 3821 3822 /* Write 0xFF to reset the sequencer */ 3823 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 3824 3825 if (ioc->bus_type == SAS) { 3826 ioc_state = mpt_GetIocState(ioc, 0); 3827 if ( (GetIocFacts(ioc, sleepFlag, 3828 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) { 3829 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n", 3830 ioc->name, ioc_state)); 3831 return -EFAULT; 3832 } 3833 } 3834 3835 for (count=0; count<HZ*20; count++) { 3836 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) { 3837 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3838 "downloadboot successful! (count=%d) IocState=%x\n", 3839 ioc->name, count, ioc_state)); 3840 if (ioc->bus_type == SAS) { 3841 return 0; 3842 } 3843 if ((SendIocInit(ioc, sleepFlag)) != 0) { 3844 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3845 "downloadboot: SendIocInit failed\n", 3846 ioc->name)); 3847 return -EFAULT; 3848 } 3849 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3850 "downloadboot: SendIocInit successful\n", 3851 ioc->name)); 3852 return 0; 3853 } 3854 if (sleepFlag == CAN_SLEEP) { 3855 msleep (10); 3856 } else { 3857 mdelay (10); 3858 } 3859 } 3860 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT 3861 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state)); 3862 return -EFAULT; 3863 } 3864 3865 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3866 /** 3867 * KickStart - Perform hard reset of MPT adapter. 3868 * @ioc: Pointer to MPT_ADAPTER structure 3869 * @force: Force hard reset 3870 * @sleepFlag: Specifies whether the process can sleep 3871 * 3872 * This routine places MPT adapter in diagnostic mode via the 3873 * WriteSequence register, and then performs a hard reset of adapter 3874 * via the Diagnostic register. 3875 * 3876 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread) 3877 * or NO_SLEEP (interrupt thread, use mdelay) 3878 * force - 1 if doorbell active, board fault state 3879 * board operational, IOC_RECOVERY or 3880 * IOC_BRINGUP and there is an alt_ioc. 3881 * 0 else 3882 * 3883 * Returns: 3884 * 1 - hard reset, READY 3885 * 0 - no reset due to History bit, READY 3886 * -1 - no reset due to History bit but not READY 3887 * OR reset but failed to come READY 3888 * -2 - no reset, could not enter DIAG mode 3889 * -3 - reset but bad FW bit 3890 */ 3891 static int 3892 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) 3893 { 3894 int hard_reset_done = 0; 3895 u32 ioc_state=0; 3896 int cnt,cntdn; 3897 3898 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name)); 3899 if (ioc->bus_type == SPI) { 3900 /* Always issue a Msg Unit Reset first. This will clear some 3901 * SCSI bus hang conditions. 3902 */ 3903 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 3904 3905 if (sleepFlag == CAN_SLEEP) { 3906 msleep (1000); 3907 } else { 3908 mdelay (1000); 3909 } 3910 } 3911 3912 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag); 3913 if (hard_reset_done < 0) 3914 return hard_reset_done; 3915 3916 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n", 3917 ioc->name)); 3918 3919 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */ 3920 for (cnt=0; cnt<cntdn; cnt++) { 3921 ioc_state = mpt_GetIocState(ioc, 1); 3922 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) { 3923 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n", 3924 ioc->name, cnt)); 3925 return hard_reset_done; 3926 } 3927 if (sleepFlag == CAN_SLEEP) { 3928 msleep (10); 3929 } else { 3930 mdelay (10); 3931 } 3932 } 3933 3934 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n", 3935 ioc->name, mpt_GetIocState(ioc, 0))); 3936 return -1; 3937 } 3938 3939 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 3940 /** 3941 * mpt_diag_reset - Perform hard reset of the adapter. 3942 * @ioc: Pointer to MPT_ADAPTER structure 3943 * @ignore: Set if to honor and clear to ignore 3944 * the reset history bit 3945 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread, 3946 * else set to NO_SLEEP (use mdelay instead) 3947 * 3948 * This routine places the adapter in diagnostic mode via the 3949 * WriteSequence register and then performs a hard reset of adapter 3950 * via the Diagnostic register. Adapter should be in ready state 3951 * upon successful completion. 3952 * 3953 * Returns: 1 hard reset successful 3954 * 0 no reset performed because reset history bit set 3955 * -2 enabling diagnostic mode failed 3956 * -3 diagnostic reset failed 3957 */ 3958 static int 3959 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) 3960 { 3961 u32 diag0val; 3962 u32 doorbell; 3963 int hard_reset_done = 0; 3964 int count = 0; 3965 u32 diag1val = 0; 3966 MpiFwHeader_t *cached_fw; /* Pointer to FW */ 3967 u8 cb_idx; 3968 3969 /* Clear any existing interrupts */ 3970 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 3971 3972 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) { 3973 3974 if (!ignore) 3975 return 0; 3976 3977 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset " 3978 "address=%p\n", ioc->name, __func__, 3979 &ioc->chip->Doorbell, &ioc->chip->Reset_1078)); 3980 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07); 3981 if (sleepFlag == CAN_SLEEP) 3982 msleep(1); 3983 else 3984 mdelay(1); 3985 3986 /* 3987 * Call each currently registered protocol IOC reset handler 3988 * with pre-reset indication. 3989 * NOTE: If we're doing _IOC_BRINGUP, there can be no 3990 * MptResetHandlers[] registered yet. 3991 */ 3992 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 3993 if (MptResetHandlers[cb_idx]) 3994 (*(MptResetHandlers[cb_idx]))(ioc, 3995 MPT_IOC_PRE_RESET); 3996 } 3997 3998 for (count = 0; count < 60; count ++) { 3999 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4000 doorbell &= MPI_IOC_STATE_MASK; 4001 4002 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4003 "looking for READY STATE: doorbell=%x" 4004 " count=%d\n", 4005 ioc->name, doorbell, count)); 4006 4007 if (doorbell == MPI_IOC_STATE_READY) { 4008 return 1; 4009 } 4010 4011 /* wait 1 sec */ 4012 if (sleepFlag == CAN_SLEEP) 4013 msleep(1000); 4014 else 4015 mdelay(1000); 4016 } 4017 return -1; 4018 } 4019 4020 /* Use "Diagnostic reset" method! (only thing available!) */ 4021 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4022 4023 if (ioc->debug_level & MPT_DEBUG) { 4024 if (ioc->alt_ioc) 4025 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4026 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n", 4027 ioc->name, diag0val, diag1val)); 4028 } 4029 4030 /* Do the reset if we are told to ignore the reset history 4031 * or if the reset history is 0 4032 */ 4033 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) { 4034 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4035 /* Write magic sequence to WriteSequence register 4036 * Loop until in diagnostic mode 4037 */ 4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4040 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4043 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4044 4045 /* wait 100 msec */ 4046 if (sleepFlag == CAN_SLEEP) { 4047 msleep (100); 4048 } else { 4049 mdelay (100); 4050 } 4051 4052 count++; 4053 if (count > 20) { 4054 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4055 ioc->name, diag0val); 4056 return -2; 4057 4058 } 4059 4060 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4061 4062 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n", 4063 ioc->name, diag0val)); 4064 } 4065 4066 if (ioc->debug_level & MPT_DEBUG) { 4067 if (ioc->alt_ioc) 4068 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4069 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n", 4070 ioc->name, diag0val, diag1val)); 4071 } 4072 /* 4073 * Disable the ARM (Bug fix) 4074 * 4075 */ 4076 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM); 4077 mdelay(1); 4078 4079 /* 4080 * Now hit the reset bit in the Diagnostic register 4081 * (THE BIG HAMMER!) (Clears DRWE bit). 4082 */ 4083 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER); 4084 hard_reset_done = 1; 4085 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n", 4086 ioc->name)); 4087 4088 /* 4089 * Call each currently registered protocol IOC reset handler 4090 * with pre-reset indication. 4091 * NOTE: If we're doing _IOC_BRINGUP, there can be no 4092 * MptResetHandlers[] registered yet. 4093 */ 4094 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 4095 if (MptResetHandlers[cb_idx]) { 4096 mpt_signal_reset(cb_idx, 4097 ioc, MPT_IOC_PRE_RESET); 4098 if (ioc->alt_ioc) { 4099 mpt_signal_reset(cb_idx, 4100 ioc->alt_ioc, MPT_IOC_PRE_RESET); 4101 } 4102 } 4103 } 4104 4105 if (ioc->cached_fw) 4106 cached_fw = (MpiFwHeader_t *)ioc->cached_fw; 4107 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) 4108 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; 4109 else 4110 cached_fw = NULL; 4111 if (cached_fw) { 4112 /* If the DownloadBoot operation fails, the 4113 * IOC will be left unusable. This is a fatal error 4114 * case. _diag_reset will return < 0 4115 */ 4116 for (count = 0; count < 30; count ++) { 4117 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4118 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { 4119 break; 4120 } 4121 4122 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", 4123 ioc->name, diag0val, count)); 4124 /* wait 1 sec */ 4125 if (sleepFlag == CAN_SLEEP) { 4126 msleep (1000); 4127 } else { 4128 mdelay (1000); 4129 } 4130 } 4131 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { 4132 printk(MYIOC_s_WARN_FMT 4133 "firmware downloadboot failure (%d)!\n", ioc->name, count); 4134 } 4135 4136 } else { 4137 /* Wait for FW to reload and for board 4138 * to go to the READY state. 4139 * Maximum wait is 60 seconds. 4140 * If fail, no error will check again 4141 * with calling program. 4142 */ 4143 for (count = 0; count < 60; count ++) { 4144 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell); 4145 doorbell &= MPI_IOC_STATE_MASK; 4146 4147 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4148 "looking for READY STATE: doorbell=%x" 4149 " count=%d\n", ioc->name, doorbell, count)); 4150 4151 if (doorbell == MPI_IOC_STATE_READY) { 4152 break; 4153 } 4154 4155 /* wait 1 sec */ 4156 if (sleepFlag == CAN_SLEEP) { 4157 msleep (1000); 4158 } else { 4159 mdelay (1000); 4160 } 4161 } 4162 4163 if (doorbell != MPI_IOC_STATE_READY) 4164 printk(MYIOC_s_ERR_FMT "Failed to come READY " 4165 "after reset! IocState=%x", ioc->name, 4166 doorbell); 4167 } 4168 } 4169 4170 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4171 if (ioc->debug_level & MPT_DEBUG) { 4172 if (ioc->alt_ioc) 4173 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4174 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n", 4175 ioc->name, diag0val, diag1val)); 4176 } 4177 4178 /* Clear RESET_HISTORY bit! Place board in the 4179 * diagnostic mode to update the diag register. 4180 */ 4181 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4182 count = 0; 4183 while ((diag0val & MPI_DIAG_DRWE) == 0) { 4184 /* Write magic sequence to WriteSequence register 4185 * Loop until in diagnostic mode 4186 */ 4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF); 4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE); 4189 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE); 4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE); 4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE); 4192 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE); 4193 4194 /* wait 100 msec */ 4195 if (sleepFlag == CAN_SLEEP) { 4196 msleep (100); 4197 } else { 4198 mdelay (100); 4199 } 4200 4201 count++; 4202 if (count > 20) { 4203 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n", 4204 ioc->name, diag0val); 4205 break; 4206 } 4207 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4208 } 4209 diag0val &= ~MPI_DIAG_RESET_HISTORY; 4210 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val); 4211 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4212 if (diag0val & MPI_DIAG_RESET_HISTORY) { 4213 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n", 4214 ioc->name); 4215 } 4216 4217 /* Disable Diagnostic Mode 4218 */ 4219 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF); 4220 4221 /* Check FW reload status flags. 4222 */ 4223 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); 4224 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) { 4225 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n", 4226 ioc->name, diag0val); 4227 return -3; 4228 } 4229 4230 if (ioc->debug_level & MPT_DEBUG) { 4231 if (ioc->alt_ioc) 4232 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic); 4233 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n", 4234 ioc->name, diag0val, diag1val)); 4235 } 4236 4237 /* 4238 * Reset flag that says we've enabled event notification 4239 */ 4240 ioc->facts.EventState = 0; 4241 4242 if (ioc->alt_ioc) 4243 ioc->alt_ioc->facts.EventState = 0; 4244 4245 return hard_reset_done; 4246 } 4247 4248 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4249 /** 4250 * SendIocReset - Send IOCReset request to MPT adapter. 4251 * @ioc: Pointer to MPT_ADAPTER structure 4252 * @reset_type: reset type, expected values are 4253 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET 4254 * @sleepFlag: Specifies whether the process can sleep 4255 * 4256 * Send IOCReset request to the MPT adapter. 4257 * 4258 * Returns 0 for success, non-zero for failure. 4259 */ 4260 static int 4261 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag) 4262 { 4263 int r; 4264 u32 state; 4265 int cntdn, count; 4266 4267 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n", 4268 ioc->name, reset_type)); 4269 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT); 4270 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4271 return r; 4272 4273 /* FW ACK'd request, wait for READY state 4274 */ 4275 count = 0; 4276 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */ 4277 4278 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) { 4279 cntdn--; 4280 count++; 4281 if (!cntdn) { 4282 if (sleepFlag != CAN_SLEEP) 4283 count *= 10; 4284 4285 printk(MYIOC_s_ERR_FMT 4286 "Wait IOC_READY state (0x%x) timeout(%d)!\n", 4287 ioc->name, state, (int)((count+5)/HZ)); 4288 return -ETIME; 4289 } 4290 4291 if (sleepFlag == CAN_SLEEP) { 4292 msleep(1); 4293 } else { 4294 mdelay (1); /* 1 msec delay */ 4295 } 4296 } 4297 4298 /* TODO! 4299 * Cleanup all event stuff for this IOC; re-issue EventNotification 4300 * request if needed. 4301 */ 4302 if (ioc->facts.Function) 4303 ioc->facts.EventState = 0; 4304 4305 return 0; 4306 } 4307 4308 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4309 /** 4310 * initChainBuffers - Allocate memory for and initialize chain buffers 4311 * @ioc: Pointer to MPT_ADAPTER structure 4312 * 4313 * Allocates memory for and initializes chain buffers, 4314 * chain buffer control arrays and spinlock. 4315 */ 4316 static int 4317 initChainBuffers(MPT_ADAPTER *ioc) 4318 { 4319 u8 *mem; 4320 int sz, ii, num_chain; 4321 int scale, num_sge, numSGE; 4322 4323 /* ReqToChain size must equal the req_depth 4324 * index = req_idx 4325 */ 4326 if (ioc->ReqToChain == NULL) { 4327 sz = ioc->req_depth * sizeof(int); 4328 mem = kmalloc(sz, GFP_ATOMIC); 4329 if (mem == NULL) 4330 return -1; 4331 4332 ioc->ReqToChain = (int *) mem; 4333 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n", 4334 ioc->name, mem, sz)); 4335 mem = kmalloc(sz, GFP_ATOMIC); 4336 if (mem == NULL) 4337 return -1; 4338 4339 ioc->RequestNB = (int *) mem; 4340 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n", 4341 ioc->name, mem, sz)); 4342 } 4343 for (ii = 0; ii < ioc->req_depth; ii++) { 4344 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN; 4345 } 4346 4347 /* ChainToChain size must equal the total number 4348 * of chain buffers to be allocated. 4349 * index = chain_idx 4350 * 4351 * Calculate the number of chain buffers needed(plus 1) per I/O 4352 * then multiply the maximum number of simultaneous cmds 4353 * 4354 * num_sge = num sge in request frame + last chain buffer 4355 * scale = num sge per chain buffer if no chain element 4356 */ 4357 scale = ioc->req_sz / ioc->SGE_size; 4358 if (ioc->sg_addr_size == sizeof(u64)) 4359 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size; 4360 else 4361 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size; 4362 4363 if (ioc->sg_addr_size == sizeof(u64)) { 4364 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale + 4365 (ioc->req_sz - 60) / ioc->SGE_size; 4366 } else { 4367 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + 4368 scale + (ioc->req_sz - 64) / ioc->SGE_size; 4369 } 4370 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n", 4371 ioc->name, num_sge, numSGE)); 4372 4373 if (ioc->bus_type == FC) { 4374 if (numSGE > MPT_SCSI_FC_SG_DEPTH) 4375 numSGE = MPT_SCSI_FC_SG_DEPTH; 4376 } else { 4377 if (numSGE > MPT_SCSI_SG_DEPTH) 4378 numSGE = MPT_SCSI_SG_DEPTH; 4379 } 4380 4381 num_chain = 1; 4382 while (numSGE - num_sge > 0) { 4383 num_chain++; 4384 num_sge += (scale - 1); 4385 } 4386 num_chain++; 4387 4388 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n", 4389 ioc->name, numSGE, num_sge, num_chain)); 4390 4391 if (ioc->bus_type == SPI) 4392 num_chain *= MPT_SCSI_CAN_QUEUE; 4393 else if (ioc->bus_type == SAS) 4394 num_chain *= MPT_SAS_CAN_QUEUE; 4395 else 4396 num_chain *= MPT_FC_CAN_QUEUE; 4397 4398 ioc->num_chain = num_chain; 4399 4400 sz = num_chain * sizeof(int); 4401 if (ioc->ChainToChain == NULL) { 4402 mem = kmalloc(sz, GFP_ATOMIC); 4403 if (mem == NULL) 4404 return -1; 4405 4406 ioc->ChainToChain = (int *) mem; 4407 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n", 4408 ioc->name, mem, sz)); 4409 } else { 4410 mem = (u8 *) ioc->ChainToChain; 4411 } 4412 memset(mem, 0xFF, sz); 4413 return num_chain; 4414 } 4415 4416 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4417 /** 4418 * PrimeIocFifos - Initialize IOC request and reply FIFOs. 4419 * @ioc: Pointer to MPT_ADAPTER structure 4420 * 4421 * This routine allocates memory for the MPT reply and request frame 4422 * pools (if necessary), and primes the IOC reply FIFO with 4423 * reply frames. 4424 * 4425 * Returns 0 for success, non-zero for failure. 4426 */ 4427 static int 4428 PrimeIocFifos(MPT_ADAPTER *ioc) 4429 { 4430 MPT_FRAME_HDR *mf; 4431 unsigned long flags; 4432 dma_addr_t alloc_dma; 4433 u8 *mem; 4434 int i, reply_sz, sz, total_size, num_chain; 4435 u64 dma_mask; 4436 4437 dma_mask = 0; 4438 4439 /* Prime reply FIFO... */ 4440 4441 if (ioc->reply_frames == NULL) { 4442 if ( (num_chain = initChainBuffers(ioc)) < 0) 4443 return -1; 4444 /* 4445 * 1078 errata workaround for the 36GB limitation 4446 */ 4447 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 && 4448 ioc->dma_mask > DMA_BIT_MASK(35)) { 4449 if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32)) 4450 && !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) { 4451 dma_mask = DMA_BIT_MASK(35); 4452 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4453 "setting 35 bit addressing for " 4454 "Request/Reply/Chain and Sense Buffers\n", 4455 ioc->name)); 4456 } else { 4457 /*Reseting DMA mask to 64 bit*/ 4458 dma_set_mask(&ioc->pcidev->dev, 4459 DMA_BIT_MASK(64)); 4460 dma_set_coherent_mask(&ioc->pcidev->dev, 4461 DMA_BIT_MASK(64)); 4462 4463 printk(MYIOC_s_ERR_FMT 4464 "failed setting 35 bit addressing for " 4465 "Request/Reply/Chain and Sense Buffers\n", 4466 ioc->name); 4467 return -1; 4468 } 4469 } 4470 4471 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth); 4472 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n", 4473 ioc->name, ioc->reply_sz, ioc->reply_depth)); 4474 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n", 4475 ioc->name, reply_sz, reply_sz)); 4476 4477 sz = (ioc->req_sz * ioc->req_depth); 4478 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n", 4479 ioc->name, ioc->req_sz, ioc->req_depth)); 4480 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n", 4481 ioc->name, sz, sz)); 4482 total_size += sz; 4483 4484 sz = num_chain * ioc->req_sz; /* chain buffer pool size */ 4485 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n", 4486 ioc->name, ioc->req_sz, num_chain)); 4487 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n", 4488 ioc->name, sz, sz, num_chain)); 4489 4490 total_size += sz; 4491 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size, 4492 &alloc_dma, GFP_KERNEL); 4493 if (mem == NULL) { 4494 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n", 4495 ioc->name); 4496 goto out_fail; 4497 } 4498 4499 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n", 4500 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size)); 4501 4502 memset(mem, 0, total_size); 4503 ioc->alloc_total += total_size; 4504 ioc->alloc = mem; 4505 ioc->alloc_dma = alloc_dma; 4506 ioc->alloc_sz = total_size; 4507 ioc->reply_frames = (MPT_FRAME_HDR *) mem; 4508 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4509 4510 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4511 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4512 4513 alloc_dma += reply_sz; 4514 mem += reply_sz; 4515 4516 /* Request FIFO - WE manage this! */ 4517 4518 ioc->req_frames = (MPT_FRAME_HDR *) mem; 4519 ioc->req_frames_dma = alloc_dma; 4520 4521 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n", 4522 ioc->name, mem, (void *)(ulong)alloc_dma)); 4523 4524 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF); 4525 4526 for (i = 0; i < ioc->req_depth; i++) { 4527 alloc_dma += ioc->req_sz; 4528 mem += ioc->req_sz; 4529 } 4530 4531 ioc->ChainBuffer = mem; 4532 ioc->ChainBufferDMA = alloc_dma; 4533 4534 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n", 4535 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA)); 4536 4537 /* Initialize the free chain Q. 4538 */ 4539 4540 INIT_LIST_HEAD(&ioc->FreeChainQ); 4541 4542 /* Post the chain buffers to the FreeChainQ. 4543 */ 4544 mem = (u8 *)ioc->ChainBuffer; 4545 for (i=0; i < num_chain; i++) { 4546 mf = (MPT_FRAME_HDR *) mem; 4547 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ); 4548 mem += ioc->req_sz; 4549 } 4550 4551 /* Initialize Request frames linked list 4552 */ 4553 alloc_dma = ioc->req_frames_dma; 4554 mem = (u8 *) ioc->req_frames; 4555 4556 spin_lock_irqsave(&ioc->FreeQlock, flags); 4557 INIT_LIST_HEAD(&ioc->FreeQ); 4558 for (i = 0; i < ioc->req_depth; i++) { 4559 mf = (MPT_FRAME_HDR *) mem; 4560 4561 /* Queue REQUESTs *internally*! */ 4562 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ); 4563 4564 mem += ioc->req_sz; 4565 } 4566 spin_unlock_irqrestore(&ioc->FreeQlock, flags); 4567 4568 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4569 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz, 4570 &ioc->sense_buf_pool_dma, GFP_KERNEL); 4571 if (ioc->sense_buf_pool == NULL) { 4572 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n", 4573 ioc->name); 4574 goto out_fail; 4575 } 4576 4577 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF); 4578 ioc->alloc_total += sz; 4579 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n", 4580 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma)); 4581 4582 } 4583 4584 /* Post Reply frames to FIFO 4585 */ 4586 alloc_dma = ioc->alloc_dma; 4587 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n", 4588 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma)); 4589 4590 for (i = 0; i < ioc->reply_depth; i++) { 4591 /* Write each address to the IOC! */ 4592 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma); 4593 alloc_dma += ioc->reply_sz; 4594 } 4595 4596 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, 4597 ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev, 4598 ioc->dma_mask)) 4599 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4600 "restoring 64 bit addressing\n", ioc->name)); 4601 4602 return 0; 4603 4604 out_fail: 4605 4606 if (ioc->alloc != NULL) { 4607 sz = ioc->alloc_sz; 4608 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc, 4609 ioc->alloc_dma); 4610 ioc->reply_frames = NULL; 4611 ioc->req_frames = NULL; 4612 ioc->alloc_total -= sz; 4613 } 4614 if (ioc->sense_buf_pool != NULL) { 4615 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC); 4616 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool, 4617 ioc->sense_buf_pool_dma); 4618 ioc->sense_buf_pool = NULL; 4619 } 4620 4621 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev, 4622 DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev, 4623 DMA_BIT_MASK(64))) 4624 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT 4625 "restoring 64 bit addressing\n", ioc->name)); 4626 4627 return -1; 4628 } 4629 4630 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4631 /** 4632 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply 4633 * from IOC via doorbell handshake method. 4634 * @ioc: Pointer to MPT_ADAPTER structure 4635 * @reqBytes: Size of the request in bytes 4636 * @req: Pointer to MPT request frame 4637 * @replyBytes: Expected size of the reply in bytes 4638 * @u16reply: Pointer to area where reply should be written 4639 * @maxwait: Max wait time for a reply (in seconds) 4640 * @sleepFlag: Specifies whether the process can sleep 4641 * 4642 * NOTES: It is the callers responsibility to byte-swap fields in the 4643 * request which are greater than 1 byte in size. It is also the 4644 * callers responsibility to byte-swap response fields which are 4645 * greater than 1 byte in size. 4646 * 4647 * Returns 0 for success, non-zero for failure. 4648 */ 4649 static int 4650 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req, 4651 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag) 4652 { 4653 MPIDefaultReply_t *mptReply; 4654 int failcnt = 0; 4655 int t; 4656 4657 /* 4658 * Get ready to cache a handshake reply 4659 */ 4660 ioc->hs_reply_idx = 0; 4661 mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4662 mptReply->MsgLength = 0; 4663 4664 /* 4665 * Make sure there are no doorbells (WRITE 0 to IntStatus reg), 4666 * then tell IOC that we want to handshake a request of N words. 4667 * (WRITE u32val to Doorbell reg). 4668 */ 4669 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4670 CHIPREG_WRITE32(&ioc->chip->Doorbell, 4671 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) | 4672 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT))); 4673 4674 /* 4675 * Wait for IOC's doorbell handshake int 4676 */ 4677 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4678 failcnt++; 4679 4680 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n", 4681 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4682 4683 /* Read doorbell and check for active bit */ 4684 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE)) 4685 return -1; 4686 4687 /* 4688 * Clear doorbell int (WRITE 0 to IntStatus reg), 4689 * then wait for IOC to ACKnowledge that it's ready for 4690 * our handshake request. 4691 */ 4692 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4693 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4694 failcnt++; 4695 4696 if (!failcnt) { 4697 int ii; 4698 u8 *req_as_bytes = (u8 *) req; 4699 4700 /* 4701 * Stuff request words via doorbell handshake, 4702 * with ACK from IOC for each. 4703 */ 4704 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) { 4705 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) | 4706 (req_as_bytes[(ii*4) + 1] << 8) | 4707 (req_as_bytes[(ii*4) + 2] << 16) | 4708 (req_as_bytes[(ii*4) + 3] << 24)); 4709 4710 CHIPREG_WRITE32(&ioc->chip->Doorbell, word); 4711 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) 4712 failcnt++; 4713 } 4714 4715 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req)); 4716 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req); 4717 4718 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n", 4719 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : "")); 4720 4721 /* 4722 * Wait for completion of doorbell handshake reply from the IOC 4723 */ 4724 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0) 4725 failcnt++; 4726 4727 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n", 4728 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : "")); 4729 4730 /* 4731 * Copy out the cached reply... 4732 */ 4733 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++) 4734 u16reply[ii] = ioc->hs_reply[ii]; 4735 } else { 4736 return -99; 4737 } 4738 4739 return -failcnt; 4740 } 4741 4742 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4743 /** 4744 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge 4745 * @ioc: Pointer to MPT_ADAPTER structure 4746 * @howlong: How long to wait (in seconds) 4747 * @sleepFlag: Specifies whether the process can sleep 4748 * 4749 * This routine waits (up to ~2 seconds max) for IOC doorbell 4750 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS 4751 * bit in its IntStatus register being clear. 4752 * 4753 * Returns a negative value on failure, else wait loop count. 4754 */ 4755 static int 4756 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4757 { 4758 int cntdn; 4759 int count = 0; 4760 u32 intstat=0; 4761 4762 cntdn = 1000 * howlong; 4763 4764 if (sleepFlag == CAN_SLEEP) { 4765 while (--cntdn) { 4766 msleep (1); 4767 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4768 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4769 break; 4770 count++; 4771 } 4772 } else { 4773 while (--cntdn) { 4774 udelay (1000); 4775 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4776 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS)) 4777 break; 4778 count++; 4779 } 4780 } 4781 4782 if (cntdn) { 4783 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n", 4784 ioc->name, count)); 4785 return count; 4786 } 4787 4788 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n", 4789 ioc->name, count, intstat); 4790 return -1; 4791 } 4792 4793 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4794 /** 4795 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit 4796 * @ioc: Pointer to MPT_ADAPTER structure 4797 * @howlong: How long to wait (in seconds) 4798 * @sleepFlag: Specifies whether the process can sleep 4799 * 4800 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt 4801 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register. 4802 * 4803 * Returns a negative value on failure, else wait loop count. 4804 */ 4805 static int 4806 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4807 { 4808 int cntdn; 4809 int count = 0; 4810 u32 intstat=0; 4811 4812 cntdn = 1000 * howlong; 4813 if (sleepFlag == CAN_SLEEP) { 4814 while (--cntdn) { 4815 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4816 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4817 break; 4818 msleep(1); 4819 count++; 4820 } 4821 } else { 4822 while (--cntdn) { 4823 intstat = CHIPREG_READ32(&ioc->chip->IntStatus); 4824 if (intstat & MPI_HIS_DOORBELL_INTERRUPT) 4825 break; 4826 udelay (1000); 4827 count++; 4828 } 4829 } 4830 4831 if (cntdn) { 4832 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n", 4833 ioc->name, count, howlong)); 4834 return count; 4835 } 4836 4837 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n", 4838 ioc->name, count, intstat); 4839 return -1; 4840 } 4841 4842 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4843 /** 4844 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply. 4845 * @ioc: Pointer to MPT_ADAPTER structure 4846 * @howlong: How long to wait (in seconds) 4847 * @sleepFlag: Specifies whether the process can sleep 4848 * 4849 * This routine polls the IOC for a handshake reply, 16 bits at a time. 4850 * Reply is cached to IOC private area large enough to hold a maximum 4851 * of 128 bytes of reply data. 4852 * 4853 * Returns a negative value on failure, else size of reply in WORDS. 4854 */ 4855 static int 4856 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag) 4857 { 4858 int u16cnt = 0; 4859 int failcnt = 0; 4860 int t; 4861 u16 *hs_reply = ioc->hs_reply; 4862 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply; 4863 u16 hword; 4864 4865 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0; 4866 4867 /* 4868 * Get first two u16's so we can look at IOC's intended reply MsgLength 4869 */ 4870 u16cnt=0; 4871 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) { 4872 failcnt++; 4873 } else { 4874 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4875 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4876 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4877 failcnt++; 4878 else { 4879 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4880 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4881 } 4882 } 4883 4884 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n", 4885 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), 4886 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : "")); 4887 4888 /* 4889 * If no error (and IOC said MsgLength is > 0), piece together 4890 * reply 16 bits at a time. 4891 */ 4892 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) { 4893 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4894 failcnt++; 4895 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF); 4896 /* don't overflow our IOC hs_reply[] buffer! */ 4897 if (u16cnt < ARRAY_SIZE(ioc->hs_reply)) 4898 hs_reply[u16cnt] = hword; 4899 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4900 } 4901 4902 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) 4903 failcnt++; 4904 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); 4905 4906 if (failcnt) { 4907 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n", 4908 ioc->name); 4909 return -failcnt; 4910 } 4911 #if 0 4912 else if (u16cnt != (2 * mptReply->MsgLength)) { 4913 return -101; 4914 } 4915 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) { 4916 return -102; 4917 } 4918 #endif 4919 4920 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name)); 4921 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply); 4922 4923 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n", 4924 ioc->name, t, u16cnt/2)); 4925 return u16cnt/2; 4926 } 4927 4928 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 4929 /** 4930 * GetLanConfigPages - Fetch LANConfig pages. 4931 * @ioc: Pointer to MPT_ADAPTER structure 4932 * 4933 * Return: 0 for success 4934 * -ENOMEM if no memory available 4935 * -EPERM if not allowed due to ISR context 4936 * -EAGAIN if no msg frames currently available 4937 * -EFAULT for non-successful reply or no reply (timeout) 4938 */ 4939 static int 4940 GetLanConfigPages(MPT_ADAPTER *ioc) 4941 { 4942 ConfigPageHeader_t hdr; 4943 CONFIGPARMS cfg; 4944 LANPage0_t *ppage0_alloc; 4945 dma_addr_t page0_dma; 4946 LANPage1_t *ppage1_alloc; 4947 dma_addr_t page1_dma; 4948 int rc = 0; 4949 int data_sz; 4950 int copy_sz; 4951 4952 /* Get LAN Page 0 header */ 4953 hdr.PageVersion = 0; 4954 hdr.PageLength = 0; 4955 hdr.PageNumber = 0; 4956 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 4957 cfg.cfghdr.hdr = &hdr; 4958 cfg.physAddr = -1; 4959 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 4960 cfg.dir = 0; 4961 cfg.pageAddr = 0; 4962 cfg.timeout = 0; 4963 4964 if ((rc = mpt_config(ioc, &cfg)) != 0) 4965 return rc; 4966 4967 if (hdr.PageLength > 0) { 4968 data_sz = hdr.PageLength * 4; 4969 ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 4970 &page0_dma, GFP_KERNEL); 4971 rc = -ENOMEM; 4972 if (ppage0_alloc) { 4973 memset((u8 *)ppage0_alloc, 0, data_sz); 4974 cfg.physAddr = page0_dma; 4975 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 4976 4977 if ((rc = mpt_config(ioc, &cfg)) == 0) { 4978 /* save the data */ 4979 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz); 4980 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz); 4981 4982 } 4983 4984 dma_free_coherent(&ioc->pcidev->dev, data_sz, 4985 (u8 *)ppage0_alloc, page0_dma); 4986 4987 /* FIXME! 4988 * Normalize endianness of structure data, 4989 * by byte-swapping all > 1 byte fields! 4990 */ 4991 4992 } 4993 4994 if (rc) 4995 return rc; 4996 } 4997 4998 /* Get LAN Page 1 header */ 4999 hdr.PageVersion = 0; 5000 hdr.PageLength = 0; 5001 hdr.PageNumber = 1; 5002 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN; 5003 cfg.cfghdr.hdr = &hdr; 5004 cfg.physAddr = -1; 5005 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5006 cfg.dir = 0; 5007 cfg.pageAddr = 0; 5008 5009 if ((rc = mpt_config(ioc, &cfg)) != 0) 5010 return rc; 5011 5012 if (hdr.PageLength == 0) 5013 return 0; 5014 5015 data_sz = hdr.PageLength * 4; 5016 rc = -ENOMEM; 5017 ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 5018 &page1_dma, GFP_KERNEL); 5019 if (ppage1_alloc) { 5020 memset((u8 *)ppage1_alloc, 0, data_sz); 5021 cfg.physAddr = page1_dma; 5022 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5023 5024 if ((rc = mpt_config(ioc, &cfg)) == 0) { 5025 /* save the data */ 5026 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz); 5027 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz); 5028 } 5029 5030 dma_free_coherent(&ioc->pcidev->dev, data_sz, 5031 (u8 *)ppage1_alloc, page1_dma); 5032 5033 /* FIXME! 5034 * Normalize endianness of structure data, 5035 * by byte-swapping all > 1 byte fields! 5036 */ 5037 5038 } 5039 5040 return rc; 5041 } 5042 5043 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5044 /** 5045 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table 5046 * @ioc: Pointer to MPT_ADAPTER structure 5047 * @persist_opcode: see below 5048 * 5049 * =============================== ====================================== 5050 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for 5051 * devices not currently present. 5052 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings 5053 * =============================== ====================================== 5054 * 5055 * NOTE: Don't use not this function during interrupt time. 5056 * 5057 * Returns 0 for success, non-zero error 5058 */ 5059 5060 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5061 int 5062 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) 5063 { 5064 SasIoUnitControlRequest_t *sasIoUnitCntrReq; 5065 SasIoUnitControlReply_t *sasIoUnitCntrReply; 5066 MPT_FRAME_HDR *mf = NULL; 5067 MPIHeader_t *mpi_hdr; 5068 int ret = 0; 5069 unsigned long timeleft; 5070 5071 mutex_lock(&ioc->mptbase_cmds.mutex); 5072 5073 /* init the internal cmd struct */ 5074 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 5075 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 5076 5077 /* insure garbage is not sent to fw */ 5078 switch(persist_opcode) { 5079 5080 case MPI_SAS_OP_CLEAR_NOT_PRESENT: 5081 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT: 5082 break; 5083 5084 default: 5085 ret = -1; 5086 goto out; 5087 } 5088 5089 printk(KERN_DEBUG "%s: persist_opcode=%x\n", 5090 __func__, persist_opcode); 5091 5092 /* Get a MF for this command. 5093 */ 5094 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 5095 printk(KERN_DEBUG "%s: no msg frames!\n", __func__); 5096 ret = -1; 5097 goto out; 5098 } 5099 5100 mpi_hdr = (MPIHeader_t *) mf; 5101 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf; 5102 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t)); 5103 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; 5104 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext; 5105 sasIoUnitCntrReq->Operation = persist_opcode; 5106 5107 mpt_put_msg_frame(mpt_base_index, ioc, mf); 5108 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ); 5109 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 5110 ret = -ETIME; 5111 printk(KERN_DEBUG "%s: failed\n", __func__); 5112 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 5113 goto out; 5114 if (!timeleft) { 5115 printk(MYIOC_s_WARN_FMT 5116 "Issuing Reset from %s!!, doorbell=0x%08x\n", 5117 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 5118 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); 5119 mpt_free_msg_frame(ioc, mf); 5120 } 5121 goto out; 5122 } 5123 5124 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 5125 ret = -1; 5126 goto out; 5127 } 5128 5129 sasIoUnitCntrReply = 5130 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply; 5131 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) { 5132 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", 5133 __func__, sasIoUnitCntrReply->IOCStatus, 5134 sasIoUnitCntrReply->IOCLogInfo); 5135 printk(KERN_DEBUG "%s: failed\n", __func__); 5136 ret = -1; 5137 } else 5138 printk(KERN_DEBUG "%s: success\n", __func__); 5139 out: 5140 5141 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 5142 mutex_unlock(&ioc->mptbase_cmds.mutex); 5143 return ret; 5144 } 5145 5146 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5147 5148 static void 5149 mptbase_raid_process_event_data(MPT_ADAPTER *ioc, 5150 MpiEventDataRaid_t * pRaidEventData) 5151 { 5152 int volume; 5153 int reason; 5154 int disk; 5155 int status; 5156 int flags; 5157 int state; 5158 5159 volume = pRaidEventData->VolumeID; 5160 reason = pRaidEventData->ReasonCode; 5161 disk = pRaidEventData->PhysDiskNum; 5162 status = le32_to_cpu(pRaidEventData->SettingsStatus); 5163 flags = (status >> 0) & 0xff; 5164 state = (status >> 8) & 0xff; 5165 5166 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { 5167 return; 5168 } 5169 5170 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED && 5171 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) || 5172 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) { 5173 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n", 5174 ioc->name, disk, volume); 5175 } else { 5176 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n", 5177 ioc->name, volume); 5178 } 5179 5180 switch(reason) { 5181 case MPI_EVENT_RAID_RC_VOLUME_CREATED: 5182 printk(MYIOC_s_INFO_FMT " volume has been created\n", 5183 ioc->name); 5184 break; 5185 5186 case MPI_EVENT_RAID_RC_VOLUME_DELETED: 5187 5188 printk(MYIOC_s_INFO_FMT " volume has been deleted\n", 5189 ioc->name); 5190 break; 5191 5192 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED: 5193 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n", 5194 ioc->name); 5195 break; 5196 5197 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: 5198 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n", 5199 ioc->name, 5200 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 5201 ? "optimal" 5202 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED 5203 ? "degraded" 5204 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED 5205 ? "failed" 5206 : "state unknown", 5207 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED 5208 ? ", enabled" : "", 5209 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 5210 ? ", quiesced" : "", 5211 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 5212 ? ", resync in progress" : "" ); 5213 break; 5214 5215 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED: 5216 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n", 5217 ioc->name, disk); 5218 break; 5219 5220 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: 5221 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n", 5222 ioc->name); 5223 break; 5224 5225 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: 5226 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n", 5227 ioc->name); 5228 break; 5229 5230 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED: 5231 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n", 5232 ioc->name); 5233 break; 5234 5235 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: 5236 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n", 5237 ioc->name, 5238 state == MPI_PHYSDISK0_STATUS_ONLINE 5239 ? "online" 5240 : state == MPI_PHYSDISK0_STATUS_MISSING 5241 ? "missing" 5242 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 5243 ? "not compatible" 5244 : state == MPI_PHYSDISK0_STATUS_FAILED 5245 ? "failed" 5246 : state == MPI_PHYSDISK0_STATUS_INITIALIZING 5247 ? "initializing" 5248 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 5249 ? "offline requested" 5250 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 5251 ? "failed requested" 5252 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 5253 ? "offline" 5254 : "state unknown", 5255 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 5256 ? ", out of sync" : "", 5257 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 5258 ? ", quiesced" : "" ); 5259 break; 5260 5261 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED: 5262 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n", 5263 ioc->name, disk); 5264 break; 5265 5266 case MPI_EVENT_RAID_RC_SMART_DATA: 5267 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n", 5268 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ); 5269 break; 5270 5271 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED: 5272 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n", 5273 ioc->name, disk); 5274 break; 5275 } 5276 } 5277 5278 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5279 /** 5280 * GetIoUnitPage2 - Retrieve BIOS version and boot order information. 5281 * @ioc: Pointer to MPT_ADAPTER structure 5282 * 5283 * Returns: 0 for success 5284 * -ENOMEM if no memory available 5285 * -EPERM if not allowed due to ISR context 5286 * -EAGAIN if no msg frames currently available 5287 * -EFAULT for non-successful reply or no reply (timeout) 5288 */ 5289 static int 5290 GetIoUnitPage2(MPT_ADAPTER *ioc) 5291 { 5292 ConfigPageHeader_t hdr; 5293 CONFIGPARMS cfg; 5294 IOUnitPage2_t *ppage_alloc; 5295 dma_addr_t page_dma; 5296 int data_sz; 5297 int rc; 5298 5299 /* Get the page header */ 5300 hdr.PageVersion = 0; 5301 hdr.PageLength = 0; 5302 hdr.PageNumber = 2; 5303 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT; 5304 cfg.cfghdr.hdr = &hdr; 5305 cfg.physAddr = -1; 5306 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5307 cfg.dir = 0; 5308 cfg.pageAddr = 0; 5309 cfg.timeout = 0; 5310 5311 if ((rc = mpt_config(ioc, &cfg)) != 0) 5312 return rc; 5313 5314 if (hdr.PageLength == 0) 5315 return 0; 5316 5317 /* Read the config page */ 5318 data_sz = hdr.PageLength * 4; 5319 rc = -ENOMEM; 5320 ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz, 5321 &page_dma, GFP_KERNEL); 5322 if (ppage_alloc) { 5323 memset((u8 *)ppage_alloc, 0, data_sz); 5324 cfg.physAddr = page_dma; 5325 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5326 5327 /* If Good, save data */ 5328 if ((rc = mpt_config(ioc, &cfg)) == 0) 5329 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion); 5330 5331 dma_free_coherent(&ioc->pcidev->dev, data_sz, 5332 (u8 *)ppage_alloc, page_dma); 5333 } 5334 5335 return rc; 5336 } 5337 5338 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5339 /** 5340 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2 5341 * @ioc: Pointer to a Adapter Strucutre 5342 * @portnum: IOC port number 5343 * 5344 * Return: -EFAULT if read of config page header fails 5345 * or if no nvram 5346 * If read of SCSI Port Page 0 fails, 5347 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5348 * Adapter settings: async, narrow 5349 * Return 1 5350 * If read of SCSI Port Page 2 fails, 5351 * Adapter settings valid 5352 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF) 5353 * Return 1 5354 * Else 5355 * Both valid 5356 * Return 0 5357 * CHECK - what type of locking mechanisms should be used???? 5358 */ 5359 static int 5360 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum) 5361 { 5362 u8 *pbuf; 5363 dma_addr_t buf_dma; 5364 CONFIGPARMS cfg; 5365 ConfigPageHeader_t header; 5366 int ii; 5367 int data, rc = 0; 5368 5369 /* Allocate memory 5370 */ 5371 if (!ioc->spi_data.nvram) { 5372 int sz; 5373 u8 *mem; 5374 sz = MPT_MAX_SCSI_DEVICES * sizeof(int); 5375 mem = kmalloc(sz, GFP_ATOMIC); 5376 if (mem == NULL) 5377 return -EFAULT; 5378 5379 ioc->spi_data.nvram = (int *) mem; 5380 5381 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n", 5382 ioc->name, ioc->spi_data.nvram, sz)); 5383 } 5384 5385 /* Invalidate NVRAM information 5386 */ 5387 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5388 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID; 5389 } 5390 5391 /* Read SPP0 header, allocate memory, then read page. 5392 */ 5393 header.PageVersion = 0; 5394 header.PageLength = 0; 5395 header.PageNumber = 0; 5396 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5397 cfg.cfghdr.hdr = &header; 5398 cfg.physAddr = -1; 5399 cfg.pageAddr = portnum; 5400 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5401 cfg.dir = 0; 5402 cfg.timeout = 0; /* use default */ 5403 if (mpt_config(ioc, &cfg) != 0) 5404 return -EFAULT; 5405 5406 if (header.PageLength > 0) { 5407 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, 5408 header.PageLength * 4, &buf_dma, 5409 GFP_KERNEL); 5410 if (pbuf) { 5411 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5412 cfg.physAddr = buf_dma; 5413 if (mpt_config(ioc, &cfg) != 0) { 5414 ioc->spi_data.maxBusWidth = MPT_NARROW; 5415 ioc->spi_data.maxSyncOffset = 0; 5416 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5417 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN; 5418 rc = 1; 5419 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5420 "Unable to read PortPage0 minSyncFactor=%x\n", 5421 ioc->name, ioc->spi_data.minSyncFactor)); 5422 } else { 5423 /* Save the Port Page 0 data 5424 */ 5425 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf; 5426 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities); 5427 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface); 5428 5429 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) { 5430 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS; 5431 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5432 "noQas due to Capabilities=%x\n", 5433 ioc->name, pPP0->Capabilities)); 5434 } 5435 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0; 5436 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK; 5437 if (data) { 5438 ioc->spi_data.maxSyncOffset = (u8) (data >> 16); 5439 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK; 5440 ioc->spi_data.minSyncFactor = (u8) (data >> 8); 5441 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5442 "PortPage0 minSyncFactor=%x\n", 5443 ioc->name, ioc->spi_data.minSyncFactor)); 5444 } else { 5445 ioc->spi_data.maxSyncOffset = 0; 5446 ioc->spi_data.minSyncFactor = MPT_ASYNC; 5447 } 5448 5449 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK; 5450 5451 /* Update the minSyncFactor based on bus type. 5452 */ 5453 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) || 5454 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) { 5455 5456 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) { 5457 ioc->spi_data.minSyncFactor = MPT_ULTRA; 5458 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT 5459 "HVD or SE detected, minSyncFactor=%x\n", 5460 ioc->name, ioc->spi_data.minSyncFactor)); 5461 } 5462 } 5463 } 5464 if (pbuf) { 5465 dma_free_coherent(&ioc->pcidev->dev, 5466 header.PageLength * 4, pbuf, 5467 buf_dma); 5468 } 5469 } 5470 } 5471 5472 /* SCSI Port Page 2 - Read the header then the page. 5473 */ 5474 header.PageVersion = 0; 5475 header.PageLength = 0; 5476 header.PageNumber = 2; 5477 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT; 5478 cfg.cfghdr.hdr = &header; 5479 cfg.physAddr = -1; 5480 cfg.pageAddr = portnum; 5481 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5482 cfg.dir = 0; 5483 if (mpt_config(ioc, &cfg) != 0) 5484 return -EFAULT; 5485 5486 if (header.PageLength > 0) { 5487 /* Allocate memory and read SCSI Port Page 2 5488 */ 5489 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, 5490 header.PageLength * 4, &buf_dma, 5491 GFP_KERNEL); 5492 if (pbuf) { 5493 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM; 5494 cfg.physAddr = buf_dma; 5495 if (mpt_config(ioc, &cfg) != 0) { 5496 /* Nvram data is left with INVALID mark 5497 */ 5498 rc = 1; 5499 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) { 5500 5501 /* This is an ATTO adapter, read Page2 accordingly 5502 */ 5503 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf; 5504 ATTODeviceInfo_t *pdevice = NULL; 5505 u16 ATTOFlags; 5506 5507 /* Save the Port Page 2 data 5508 * (reformat into a 32bit quantity) 5509 */ 5510 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5511 pdevice = &pPP2->DeviceSettings[ii]; 5512 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags); 5513 data = 0; 5514 5515 /* Translate ATTO device flags to LSI format 5516 */ 5517 if (ATTOFlags & ATTOFLAG_DISC) 5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE); 5519 if (ATTOFlags & ATTOFLAG_ID_ENB) 5520 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE); 5521 if (ATTOFlags & ATTOFLAG_LUN_ENB) 5522 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE); 5523 if (ATTOFlags & ATTOFLAG_TAGGED) 5524 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE); 5525 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB)) 5526 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE); 5527 5528 data = (data << 16) | (pdevice->Period << 8) | 10; 5529 ioc->spi_data.nvram[ii] = data; 5530 } 5531 } else { 5532 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf; 5533 MpiDeviceInfo_t *pdevice = NULL; 5534 5535 /* 5536 * Save "Set to Avoid SCSI Bus Resets" flag 5537 */ 5538 ioc->spi_data.bus_reset = 5539 (le32_to_cpu(pPP2->PortFlags) & 5540 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ? 5541 0 : 1 ; 5542 5543 /* Save the Port Page 2 data 5544 * (reformat into a 32bit quantity) 5545 */ 5546 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK; 5547 ioc->spi_data.PortFlags = data; 5548 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { 5549 pdevice = &pPP2->DeviceSettings[ii]; 5550 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) | 5551 (pdevice->SyncFactor << 8) | pdevice->Timeout; 5552 ioc->spi_data.nvram[ii] = data; 5553 } 5554 } 5555 5556 dma_free_coherent(&ioc->pcidev->dev, 5557 header.PageLength * 4, pbuf, 5558 buf_dma); 5559 } 5560 } 5561 5562 /* Update Adapter limits with those from NVRAM 5563 * Comment: Don't need to do this. Target performance 5564 * parameters will never exceed the adapters limits. 5565 */ 5566 5567 return rc; 5568 } 5569 5570 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 5571 /** 5572 * mpt_readScsiDevicePageHeaders - save version and length of SDP1 5573 * @ioc: Pointer to a Adapter Strucutre 5574 * @portnum: IOC port number 5575 * 5576 * Return: -EFAULT if read of config page header fails 5577 * or 0 if success. 5578 */ 5579 static int 5580 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum) 5581 { 5582 CONFIGPARMS cfg; 5583 ConfigPageHeader_t header; 5584 5585 /* Read the SCSI Device Page 1 header 5586 */ 5587 header.PageVersion = 0; 5588 header.PageLength = 0; 5589 header.PageNumber = 1; 5590 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5591 cfg.cfghdr.hdr = &header; 5592 cfg.physAddr = -1; 5593 cfg.pageAddr = portnum; 5594 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5595 cfg.dir = 0; 5596 cfg.timeout = 0; 5597 if (mpt_config(ioc, &cfg) != 0) 5598 return -EFAULT; 5599 5600 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion; 5601 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength; 5602 5603 header.PageVersion = 0; 5604 header.PageLength = 0; 5605 header.PageNumber = 0; 5606 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; 5607 if (mpt_config(ioc, &cfg) != 0) 5608 return -EFAULT; 5609 5610 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion; 5611 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength; 5612 5613 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n", 5614 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length)); 5615 5616 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n", 5617 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length)); 5618 return 0; 5619 } 5620 5621 /** 5622 * mpt_inactive_raid_list_free - This clears this link list. 5623 * @ioc : pointer to per adapter structure 5624 **/ 5625 static void 5626 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc) 5627 { 5628 struct inactive_raid_component_info *component_info, *pNext; 5629 5630 if (list_empty(&ioc->raid_data.inactive_list)) 5631 return; 5632 5633 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5634 list_for_each_entry_safe(component_info, pNext, 5635 &ioc->raid_data.inactive_list, list) { 5636 list_del(&component_info->list); 5637 kfree(component_info); 5638 } 5639 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5640 } 5641 5642 /** 5643 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume 5644 * 5645 * @ioc : pointer to per adapter structure 5646 * @channel : volume channel 5647 * @id : volume target id 5648 **/ 5649 static void 5650 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id) 5651 { 5652 CONFIGPARMS cfg; 5653 ConfigPageHeader_t hdr; 5654 dma_addr_t dma_handle; 5655 pRaidVolumePage0_t buffer = NULL; 5656 int i; 5657 RaidPhysDiskPage0_t phys_disk; 5658 struct inactive_raid_component_info *component_info; 5659 int handle_inactive_volumes; 5660 5661 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5662 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5663 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; 5664 cfg.pageAddr = (channel << 8) + id; 5665 cfg.cfghdr.hdr = &hdr; 5666 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5667 5668 if (mpt_config(ioc, &cfg) != 0) 5669 goto out; 5670 5671 if (!hdr.PageLength) 5672 goto out; 5673 5674 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5675 &dma_handle, GFP_KERNEL); 5676 5677 if (!buffer) 5678 goto out; 5679 5680 cfg.physAddr = dma_handle; 5681 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5682 5683 if (mpt_config(ioc, &cfg) != 0) 5684 goto out; 5685 5686 if (!buffer->NumPhysDisks) 5687 goto out; 5688 5689 handle_inactive_volumes = 5690 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE || 5691 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 || 5692 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED || 5693 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0; 5694 5695 if (!handle_inactive_volumes) 5696 goto out; 5697 5698 mutex_lock(&ioc->raid_data.inactive_list_mutex); 5699 for (i = 0; i < buffer->NumPhysDisks; i++) { 5700 if(mpt_raid_phys_disk_pg0(ioc, 5701 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) 5702 continue; 5703 5704 if ((component_info = kmalloc(sizeof (*component_info), 5705 GFP_KERNEL)) == NULL) 5706 continue; 5707 5708 component_info->volumeID = id; 5709 component_info->volumeBus = channel; 5710 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum; 5711 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus; 5712 component_info->d.PhysDiskID = phys_disk.PhysDiskID; 5713 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC; 5714 5715 list_add_tail(&component_info->list, 5716 &ioc->raid_data.inactive_list); 5717 } 5718 mutex_unlock(&ioc->raid_data.inactive_list_mutex); 5719 5720 out: 5721 if (buffer) 5722 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5723 buffer, dma_handle); 5724 } 5725 5726 /** 5727 * mpt_raid_phys_disk_pg0 - returns phys disk page zero 5728 * @ioc: Pointer to a Adapter Structure 5729 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5730 * @phys_disk: requested payload data returned 5731 * 5732 * Return: 5733 * 0 on success 5734 * -EFAULT if read of config page header fails or data pointer not NULL 5735 * -ENOMEM if pci_alloc failed 5736 **/ 5737 int 5738 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, 5739 RaidPhysDiskPage0_t *phys_disk) 5740 { 5741 CONFIGPARMS cfg; 5742 ConfigPageHeader_t hdr; 5743 dma_addr_t dma_handle; 5744 pRaidPhysDiskPage0_t buffer = NULL; 5745 int rc; 5746 5747 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5748 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5749 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t)); 5750 5751 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION; 5752 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5753 cfg.cfghdr.hdr = &hdr; 5754 cfg.physAddr = -1; 5755 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5756 5757 if (mpt_config(ioc, &cfg) != 0) { 5758 rc = -EFAULT; 5759 goto out; 5760 } 5761 5762 if (!hdr.PageLength) { 5763 rc = -EFAULT; 5764 goto out; 5765 } 5766 5767 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5768 &dma_handle, GFP_KERNEL); 5769 5770 if (!buffer) { 5771 rc = -ENOMEM; 5772 goto out; 5773 } 5774 5775 cfg.physAddr = dma_handle; 5776 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5777 cfg.pageAddr = phys_disk_num; 5778 5779 if (mpt_config(ioc, &cfg) != 0) { 5780 rc = -EFAULT; 5781 goto out; 5782 } 5783 5784 rc = 0; 5785 memcpy(phys_disk, buffer, sizeof(*buffer)); 5786 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA); 5787 5788 out: 5789 5790 if (buffer) 5791 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5792 buffer, dma_handle); 5793 5794 return rc; 5795 } 5796 5797 /** 5798 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num 5799 * @ioc: Pointer to a Adapter Structure 5800 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5801 * 5802 * Return: 5803 * returns number paths 5804 **/ 5805 int 5806 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num) 5807 { 5808 CONFIGPARMS cfg; 5809 ConfigPageHeader_t hdr; 5810 dma_addr_t dma_handle; 5811 pRaidPhysDiskPage1_t buffer = NULL; 5812 int rc; 5813 5814 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5815 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5816 5817 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5818 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5819 hdr.PageNumber = 1; 5820 cfg.cfghdr.hdr = &hdr; 5821 cfg.physAddr = -1; 5822 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5823 5824 if (mpt_config(ioc, &cfg) != 0) { 5825 rc = 0; 5826 goto out; 5827 } 5828 5829 if (!hdr.PageLength) { 5830 rc = 0; 5831 goto out; 5832 } 5833 5834 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5835 &dma_handle, GFP_KERNEL); 5836 5837 if (!buffer) { 5838 rc = 0; 5839 goto out; 5840 } 5841 5842 cfg.physAddr = dma_handle; 5843 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5844 cfg.pageAddr = phys_disk_num; 5845 5846 if (mpt_config(ioc, &cfg) != 0) { 5847 rc = 0; 5848 goto out; 5849 } 5850 5851 rc = buffer->NumPhysDiskPaths; 5852 out: 5853 5854 if (buffer) 5855 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5856 buffer, dma_handle); 5857 5858 return rc; 5859 } 5860 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths); 5861 5862 /** 5863 * mpt_raid_phys_disk_pg1 - returns phys disk page 1 5864 * @ioc: Pointer to a Adapter Structure 5865 * @phys_disk_num: io unit unique phys disk num generated by the ioc 5866 * @phys_disk: requested payload data returned 5867 * 5868 * Return: 5869 * 0 on success 5870 * -EFAULT if read of config page header fails or data pointer not NULL 5871 * -ENOMEM if pci_alloc failed 5872 **/ 5873 int 5874 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num, 5875 RaidPhysDiskPage1_t *phys_disk) 5876 { 5877 CONFIGPARMS cfg; 5878 ConfigPageHeader_t hdr; 5879 dma_addr_t dma_handle; 5880 pRaidPhysDiskPage1_t buffer = NULL; 5881 int rc; 5882 int i; 5883 __le64 sas_address; 5884 5885 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 5886 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 5887 rc = 0; 5888 5889 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION; 5890 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK; 5891 hdr.PageNumber = 1; 5892 cfg.cfghdr.hdr = &hdr; 5893 cfg.physAddr = -1; 5894 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5895 5896 if (mpt_config(ioc, &cfg) != 0) { 5897 rc = -EFAULT; 5898 goto out; 5899 } 5900 5901 if (!hdr.PageLength) { 5902 rc = -EFAULT; 5903 goto out; 5904 } 5905 5906 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5907 &dma_handle, GFP_KERNEL); 5908 5909 if (!buffer) { 5910 rc = -ENOMEM; 5911 goto out; 5912 } 5913 5914 cfg.physAddr = dma_handle; 5915 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 5916 cfg.pageAddr = phys_disk_num; 5917 5918 if (mpt_config(ioc, &cfg) != 0) { 5919 rc = -EFAULT; 5920 goto out; 5921 } 5922 5923 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths; 5924 phys_disk->PhysDiskNum = phys_disk_num; 5925 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) { 5926 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID; 5927 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus; 5928 phys_disk->Path[i].OwnerIdentifier = 5929 buffer->Path[i].OwnerIdentifier; 5930 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags); 5931 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64)); 5932 sas_address = le64_to_cpu(sas_address); 5933 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64)); 5934 memcpy(&sas_address, 5935 &buffer->Path[i].OwnerWWID, sizeof(__le64)); 5936 sas_address = le64_to_cpu(sas_address); 5937 memcpy(&phys_disk->Path[i].OwnerWWID, 5938 &sas_address, sizeof(__le64)); 5939 } 5940 5941 out: 5942 5943 if (buffer) 5944 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 5945 buffer, dma_handle); 5946 5947 return rc; 5948 } 5949 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1); 5950 5951 5952 /** 5953 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes 5954 * @ioc: Pointer to a Adapter Strucutre 5955 * 5956 * Return: 5957 * 0 on success 5958 * -EFAULT if read of config page header fails or data pointer not NULL 5959 * -ENOMEM if pci_alloc failed 5960 **/ 5961 int 5962 mpt_findImVolumes(MPT_ADAPTER *ioc) 5963 { 5964 IOCPage2_t *pIoc2; 5965 u8 *mem; 5966 dma_addr_t ioc2_dma; 5967 CONFIGPARMS cfg; 5968 ConfigPageHeader_t header; 5969 int rc = 0; 5970 int iocpage2sz; 5971 int i; 5972 5973 if (!ioc->ir_firmware) 5974 return 0; 5975 5976 /* Free the old page 5977 */ 5978 kfree(ioc->raid_data.pIocPg2); 5979 ioc->raid_data.pIocPg2 = NULL; 5980 mpt_inactive_raid_list_free(ioc); 5981 5982 /* Read IOCP2 header then the page. 5983 */ 5984 header.PageVersion = 0; 5985 header.PageLength = 0; 5986 header.PageNumber = 2; 5987 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 5988 cfg.cfghdr.hdr = &header; 5989 cfg.physAddr = -1; 5990 cfg.pageAddr = 0; 5991 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 5992 cfg.dir = 0; 5993 cfg.timeout = 0; 5994 if (mpt_config(ioc, &cfg) != 0) 5995 return -EFAULT; 5996 5997 if (header.PageLength == 0) 5998 return -EFAULT; 5999 6000 iocpage2sz = header.PageLength * 4; 6001 pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma, 6002 GFP_KERNEL); 6003 if (!pIoc2) 6004 return -ENOMEM; 6005 6006 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6007 cfg.physAddr = ioc2_dma; 6008 if (mpt_config(ioc, &cfg) != 0) 6009 goto out; 6010 6011 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL); 6012 if (!mem) { 6013 rc = -ENOMEM; 6014 goto out; 6015 } 6016 6017 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; 6018 6019 mpt_read_ioc_pg_3(ioc); 6020 6021 for (i = 0; i < pIoc2->NumActiveVolumes ; i++) 6022 mpt_inactive_raid_volumes(ioc, 6023 pIoc2->RaidVolume[i].VolumeBus, 6024 pIoc2->RaidVolume[i].VolumeID); 6025 6026 out: 6027 dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma); 6028 6029 return rc; 6030 } 6031 6032 static int 6033 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) 6034 { 6035 IOCPage3_t *pIoc3; 6036 u8 *mem; 6037 CONFIGPARMS cfg; 6038 ConfigPageHeader_t header; 6039 dma_addr_t ioc3_dma; 6040 int iocpage3sz = 0; 6041 6042 /* Free the old page 6043 */ 6044 kfree(ioc->raid_data.pIocPg3); 6045 ioc->raid_data.pIocPg3 = NULL; 6046 6047 /* There is at least one physical disk. 6048 * Read and save IOC Page 3 6049 */ 6050 header.PageVersion = 0; 6051 header.PageLength = 0; 6052 header.PageNumber = 3; 6053 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6054 cfg.cfghdr.hdr = &header; 6055 cfg.physAddr = -1; 6056 cfg.pageAddr = 0; 6057 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6058 cfg.dir = 0; 6059 cfg.timeout = 0; 6060 if (mpt_config(ioc, &cfg) != 0) 6061 return 0; 6062 6063 if (header.PageLength == 0) 6064 return 0; 6065 6066 /* Read Header good, alloc memory 6067 */ 6068 iocpage3sz = header.PageLength * 4; 6069 pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma, 6070 GFP_KERNEL); 6071 if (!pIoc3) 6072 return 0; 6073 6074 /* Read the Page and save the data 6075 * into malloc'd memory. 6076 */ 6077 cfg.physAddr = ioc3_dma; 6078 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6079 if (mpt_config(ioc, &cfg) == 0) { 6080 mem = kmalloc(iocpage3sz, GFP_KERNEL); 6081 if (mem) { 6082 memcpy(mem, (u8 *)pIoc3, iocpage3sz); 6083 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; 6084 } 6085 } 6086 6087 dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma); 6088 6089 return 0; 6090 } 6091 6092 static void 6093 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc) 6094 { 6095 IOCPage4_t *pIoc4; 6096 CONFIGPARMS cfg; 6097 ConfigPageHeader_t header; 6098 dma_addr_t ioc4_dma; 6099 int iocpage4sz; 6100 6101 /* Read and save IOC Page 4 6102 */ 6103 header.PageVersion = 0; 6104 header.PageLength = 0; 6105 header.PageNumber = 4; 6106 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6107 cfg.cfghdr.hdr = &header; 6108 cfg.physAddr = -1; 6109 cfg.pageAddr = 0; 6110 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6111 cfg.dir = 0; 6112 cfg.timeout = 0; 6113 if (mpt_config(ioc, &cfg) != 0) 6114 return; 6115 6116 if (header.PageLength == 0) 6117 return; 6118 6119 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) { 6120 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */ 6121 pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz, 6122 &ioc4_dma, GFP_KERNEL); 6123 if (!pIoc4) 6124 return; 6125 ioc->alloc_total += iocpage4sz; 6126 } else { 6127 ioc4_dma = ioc->spi_data.IocPg4_dma; 6128 iocpage4sz = ioc->spi_data.IocPg4Sz; 6129 } 6130 6131 /* Read the Page into dma memory. 6132 */ 6133 cfg.physAddr = ioc4_dma; 6134 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6135 if (mpt_config(ioc, &cfg) == 0) { 6136 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4; 6137 ioc->spi_data.IocPg4_dma = ioc4_dma; 6138 ioc->spi_data.IocPg4Sz = iocpage4sz; 6139 } else { 6140 dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4, 6141 ioc4_dma); 6142 ioc->spi_data.pIocPg4 = NULL; 6143 ioc->alloc_total -= iocpage4sz; 6144 } 6145 } 6146 6147 static void 6148 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc) 6149 { 6150 IOCPage1_t *pIoc1; 6151 CONFIGPARMS cfg; 6152 ConfigPageHeader_t header; 6153 dma_addr_t ioc1_dma; 6154 int iocpage1sz = 0; 6155 u32 tmp; 6156 6157 /* Check the Coalescing Timeout in IOC Page 1 6158 */ 6159 header.PageVersion = 0; 6160 header.PageLength = 0; 6161 header.PageNumber = 1; 6162 header.PageType = MPI_CONFIG_PAGETYPE_IOC; 6163 cfg.cfghdr.hdr = &header; 6164 cfg.physAddr = -1; 6165 cfg.pageAddr = 0; 6166 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6167 cfg.dir = 0; 6168 cfg.timeout = 0; 6169 if (mpt_config(ioc, &cfg) != 0) 6170 return; 6171 6172 if (header.PageLength == 0) 6173 return; 6174 6175 /* Read Header good, alloc memory 6176 */ 6177 iocpage1sz = header.PageLength * 4; 6178 pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma, 6179 GFP_KERNEL); 6180 if (!pIoc1) 6181 return; 6182 6183 /* Read the Page and check coalescing timeout 6184 */ 6185 cfg.physAddr = ioc1_dma; 6186 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6187 if (mpt_config(ioc, &cfg) == 0) { 6188 6189 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING; 6190 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) { 6191 tmp = le32_to_cpu(pIoc1->CoalescingTimeout); 6192 6193 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n", 6194 ioc->name, tmp)); 6195 6196 if (tmp > MPT_COALESCING_TIMEOUT) { 6197 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT); 6198 6199 /* Write NVRAM and current 6200 */ 6201 cfg.dir = 1; 6202 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; 6203 if (mpt_config(ioc, &cfg) == 0) { 6204 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n", 6205 ioc->name, MPT_COALESCING_TIMEOUT)); 6206 6207 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM; 6208 if (mpt_config(ioc, &cfg) == 0) { 6209 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6210 "Reset NVRAM Coalescing Timeout to = %d\n", 6211 ioc->name, MPT_COALESCING_TIMEOUT)); 6212 } else { 6213 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6214 "Reset NVRAM Coalescing Timeout Failed\n", 6215 ioc->name)); 6216 } 6217 6218 } else { 6219 dprintk(ioc, printk(MYIOC_s_WARN_FMT 6220 "Reset of Current Coalescing Timeout Failed!\n", 6221 ioc->name)); 6222 } 6223 } 6224 6225 } else { 6226 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name)); 6227 } 6228 } 6229 6230 dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma); 6231 6232 return; 6233 } 6234 6235 static void 6236 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc) 6237 { 6238 CONFIGPARMS cfg; 6239 ConfigPageHeader_t hdr; 6240 dma_addr_t buf_dma; 6241 ManufacturingPage0_t *pbuf = NULL; 6242 6243 memset(&cfg, 0 , sizeof(CONFIGPARMS)); 6244 memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); 6245 6246 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING; 6247 cfg.cfghdr.hdr = &hdr; 6248 cfg.physAddr = -1; 6249 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; 6250 cfg.timeout = 10; 6251 6252 if (mpt_config(ioc, &cfg) != 0) 6253 goto out; 6254 6255 if (!cfg.cfghdr.hdr->PageLength) 6256 goto out; 6257 6258 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; 6259 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, 6260 &buf_dma, GFP_KERNEL); 6261 if (!pbuf) 6262 goto out; 6263 6264 cfg.physAddr = buf_dma; 6265 6266 if (mpt_config(ioc, &cfg) != 0) 6267 goto out; 6268 6269 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name)); 6270 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly)); 6271 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer)); 6272 6273 out: 6274 6275 if (pbuf) 6276 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf, 6277 buf_dma); 6278 } 6279 6280 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6281 /** 6282 * SendEventNotification - Send EventNotification (on or off) request to adapter 6283 * @ioc: Pointer to MPT_ADAPTER structure 6284 * @EvSwitch: Event switch flags 6285 * @sleepFlag: Specifies whether the process can sleep 6286 */ 6287 static int 6288 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag) 6289 { 6290 EventNotification_t evn; 6291 MPIDefaultReply_t reply_buf; 6292 6293 memset(&evn, 0, sizeof(EventNotification_t)); 6294 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t)); 6295 6296 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION; 6297 evn.Switch = EvSwitch; 6298 evn.MsgContext = cpu_to_le32(mpt_base_index << 16); 6299 6300 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6301 "Sending EventNotification (%d) request %p\n", 6302 ioc->name, EvSwitch, &evn)); 6303 6304 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t), 6305 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30, 6306 sleepFlag); 6307 } 6308 6309 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6310 /** 6311 * SendEventAck - Send EventAck request to MPT adapter. 6312 * @ioc: Pointer to MPT_ADAPTER structure 6313 * @evnp: Pointer to original EventNotification request 6314 */ 6315 static int 6316 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp) 6317 { 6318 EventAck_t *pAck; 6319 6320 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6321 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n", 6322 ioc->name, __func__)); 6323 return -1; 6324 } 6325 6326 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name)); 6327 6328 pAck->Function = MPI_FUNCTION_EVENT_ACK; 6329 pAck->ChainOffset = 0; 6330 pAck->Reserved[0] = pAck->Reserved[1] = 0; 6331 pAck->MsgFlags = 0; 6332 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0; 6333 pAck->Event = evnp->Event; 6334 pAck->EventContext = evnp->EventContext; 6335 6336 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck); 6337 6338 return 0; 6339 } 6340 6341 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6342 /** 6343 * mpt_config - Generic function to issue config message 6344 * @ioc: Pointer to an adapter structure 6345 * @pCfg: Pointer to a configuration structure. Struct contains 6346 * action, page address, direction, physical address 6347 * and pointer to a configuration page header 6348 * Page header is updated. 6349 * 6350 * Returns 0 for success 6351 * -EAGAIN if no msg frames currently available 6352 * -EFAULT for non-successful reply or no reply (timeout) 6353 */ 6354 int 6355 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg) 6356 { 6357 Config_t *pReq; 6358 ConfigReply_t *pReply; 6359 ConfigExtendedPageHeader_t *pExtHdr = NULL; 6360 MPT_FRAME_HDR *mf; 6361 int ii; 6362 int flagsLength; 6363 long timeout; 6364 int ret; 6365 u8 page_type = 0, extend_page; 6366 unsigned long timeleft; 6367 unsigned long flags; 6368 u8 issue_hard_reset = 0; 6369 u8 retry_count = 0; 6370 6371 might_sleep(); 6372 6373 /* don't send a config page during diag reset */ 6374 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6375 if (ioc->ioc_reset_in_progress) { 6376 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6377 "%s: busy with host reset\n", ioc->name, __func__)); 6378 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6379 return -EBUSY; 6380 } 6381 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6382 6383 /* don't send if no chance of success */ 6384 if (!ioc->active || 6385 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) { 6386 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6387 "%s: ioc not operational, %d, %xh\n", 6388 ioc->name, __func__, ioc->active, 6389 mpt_GetIocState(ioc, 0))); 6390 return -EFAULT; 6391 } 6392 6393 retry_config: 6394 mutex_lock(&ioc->mptbase_cmds.mutex); 6395 /* init the internal cmd struct */ 6396 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE); 6397 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status) 6398 6399 /* Get and Populate a free Frame 6400 */ 6401 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) { 6402 dcprintk(ioc, printk(MYIOC_s_WARN_FMT 6403 "mpt_config: no msg frames!\n", ioc->name)); 6404 ret = -EAGAIN; 6405 goto out; 6406 } 6407 6408 pReq = (Config_t *)mf; 6409 pReq->Action = pCfg->action; 6410 pReq->Reserved = 0; 6411 pReq->ChainOffset = 0; 6412 pReq->Function = MPI_FUNCTION_CONFIG; 6413 6414 /* Assume page type is not extended and clear "reserved" fields. */ 6415 pReq->ExtPageLength = 0; 6416 pReq->ExtPageType = 0; 6417 pReq->MsgFlags = 0; 6418 6419 for (ii=0; ii < 8; ii++) 6420 pReq->Reserved2[ii] = 0; 6421 6422 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion; 6423 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength; 6424 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber; 6425 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK); 6426 6427 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) { 6428 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr; 6429 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength); 6430 pReq->ExtPageType = pExtHdr->ExtPageType; 6431 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; 6432 6433 /* Page Length must be treated as a reserved field for the 6434 * extended header. 6435 */ 6436 pReq->Header.PageLength = 0; 6437 } 6438 6439 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr); 6440 6441 /* Add a SGE to the config request. 6442 */ 6443 if (pCfg->dir) 6444 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE; 6445 else 6446 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ; 6447 6448 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == 6449 MPI_CONFIG_PAGETYPE_EXTENDED) { 6450 flagsLength |= pExtHdr->ExtPageLength * 4; 6451 page_type = pReq->ExtPageType; 6452 extend_page = 1; 6453 } else { 6454 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4; 6455 page_type = pReq->Header.PageType; 6456 extend_page = 0; 6457 } 6458 6459 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6460 "Sending Config request type 0x%x, page 0x%x and action %d\n", 6461 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action)); 6462 6463 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr); 6464 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout; 6465 mpt_put_msg_frame(mpt_base_index, ioc, mf); 6466 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 6467 timeout); 6468 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { 6469 ret = -ETIME; 6470 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6471 "Failed Sending Config request type 0x%x, page 0x%x," 6472 " action %d, status %xh, time left %ld\n\n", 6473 ioc->name, page_type, pReq->Header.PageNumber, 6474 pReq->Action, ioc->mptbase_cmds.status, timeleft)); 6475 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) 6476 goto out; 6477 if (!timeleft) { 6478 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6479 if (ioc->ioc_reset_in_progress) { 6480 spin_unlock_irqrestore(&ioc->taskmgmt_lock, 6481 flags); 6482 printk(MYIOC_s_INFO_FMT "%s: host reset in" 6483 " progress mpt_config timed out.!!\n", 6484 __func__, ioc->name); 6485 mutex_unlock(&ioc->mptbase_cmds.mutex); 6486 return -EFAULT; 6487 } 6488 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6489 issue_hard_reset = 1; 6490 } 6491 goto out; 6492 } 6493 6494 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { 6495 ret = -1; 6496 goto out; 6497 } 6498 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply; 6499 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK; 6500 if (ret == MPI_IOCSTATUS_SUCCESS) { 6501 if (extend_page) { 6502 pCfg->cfghdr.ehdr->ExtPageLength = 6503 le16_to_cpu(pReply->ExtPageLength); 6504 pCfg->cfghdr.ehdr->ExtPageType = 6505 pReply->ExtPageType; 6506 } 6507 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion; 6508 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength; 6509 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber; 6510 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType; 6511 6512 } 6513 6514 if (retry_count) 6515 printk(MYIOC_s_INFO_FMT "Retry completed " 6516 "ret=0x%x timeleft=%ld\n", 6517 ioc->name, ret, timeleft); 6518 6519 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n", 6520 ret, le32_to_cpu(pReply->IOCLogInfo))); 6521 6522 out: 6523 6524 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status) 6525 mutex_unlock(&ioc->mptbase_cmds.mutex); 6526 if (issue_hard_reset) { 6527 issue_hard_reset = 0; 6528 printk(MYIOC_s_WARN_FMT 6529 "Issuing Reset from %s!!, doorbell=0x%08x\n", 6530 ioc->name, __func__, mpt_GetIocState(ioc, 0)); 6531 if (retry_count == 0) { 6532 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) 6533 retry_count++; 6534 } else 6535 mpt_HardResetHandler(ioc, CAN_SLEEP); 6536 6537 mpt_free_msg_frame(ioc, mf); 6538 /* attempt one retry for a timed out command */ 6539 if (retry_count < 2) { 6540 printk(MYIOC_s_INFO_FMT 6541 "Attempting Retry Config request" 6542 " type 0x%x, page 0x%x," 6543 " action %d\n", ioc->name, page_type, 6544 pCfg->cfghdr.hdr->PageNumber, pCfg->action); 6545 retry_count++; 6546 goto retry_config; 6547 } 6548 } 6549 return ret; 6550 6551 } 6552 6553 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6554 /** 6555 * mpt_ioc_reset - Base cleanup for hard reset 6556 * @ioc: Pointer to the adapter structure 6557 * @reset_phase: Indicates pre- or post-reset functionality 6558 * 6559 * Remark: Frees resources with internally generated commands. 6560 */ 6561 static int 6562 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) 6563 { 6564 switch (reset_phase) { 6565 case MPT_IOC_SETUP_RESET: 6566 ioc->taskmgmt_quiesce_io = 1; 6567 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6568 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__)); 6569 break; 6570 case MPT_IOC_PRE_RESET: 6571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6572 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__)); 6573 break; 6574 case MPT_IOC_POST_RESET: 6575 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6576 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__)); 6577 /* wake up mptbase_cmds */ 6578 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) { 6579 ioc->mptbase_cmds.status |= 6580 MPT_MGMT_STATUS_DID_IOCRESET; 6581 complete(&ioc->mptbase_cmds.done); 6582 } 6583 /* wake up taskmgmt_cmds */ 6584 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) { 6585 ioc->taskmgmt_cmds.status |= 6586 MPT_MGMT_STATUS_DID_IOCRESET; 6587 complete(&ioc->taskmgmt_cmds.done); 6588 } 6589 break; 6590 default: 6591 break; 6592 } 6593 6594 return 1; /* currently means nothing really */ 6595 } 6596 6597 6598 #ifdef CONFIG_PROC_FS /* { */ 6599 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6600 /* 6601 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff... 6602 */ 6603 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6604 /** 6605 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries. 6606 * 6607 * Returns 0 for success, non-zero for failure. 6608 */ 6609 static int 6610 procmpt_create(void) 6611 { 6612 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL); 6613 if (mpt_proc_root_dir == NULL) 6614 return -ENOTDIR; 6615 6616 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir, 6617 mpt_summary_proc_show); 6618 proc_create_single("version", S_IRUGO, mpt_proc_root_dir, 6619 mpt_version_proc_show); 6620 return 0; 6621 } 6622 6623 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6624 /** 6625 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries. 6626 * 6627 * Returns 0 for success, non-zero for failure. 6628 */ 6629 static void 6630 procmpt_destroy(void) 6631 { 6632 remove_proc_entry("version", mpt_proc_root_dir); 6633 remove_proc_entry("summary", mpt_proc_root_dir); 6634 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL); 6635 } 6636 6637 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6638 /* 6639 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary. 6640 */ 6641 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan); 6642 6643 static int mpt_summary_proc_show(struct seq_file *m, void *v) 6644 { 6645 MPT_ADAPTER *ioc = m->private; 6646 6647 if (ioc) { 6648 seq_mpt_print_ioc_summary(ioc, m, 1); 6649 } else { 6650 list_for_each_entry(ioc, &ioc_list, list) { 6651 seq_mpt_print_ioc_summary(ioc, m, 1); 6652 } 6653 } 6654 6655 return 0; 6656 } 6657 6658 static int mpt_version_proc_show(struct seq_file *m, void *v) 6659 { 6660 u8 cb_idx; 6661 int scsi, fc, sas, lan, ctl, targ; 6662 char *drvname; 6663 6664 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON); 6665 seq_printf(m, " Fusion MPT base driver\n"); 6666 6667 scsi = fc = sas = lan = ctl = targ = 0; 6668 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 6669 drvname = NULL; 6670 if (MptCallbacks[cb_idx]) { 6671 switch (MptDriverClass[cb_idx]) { 6672 case MPTSPI_DRIVER: 6673 if (!scsi++) drvname = "SPI host"; 6674 break; 6675 case MPTFC_DRIVER: 6676 if (!fc++) drvname = "FC host"; 6677 break; 6678 case MPTSAS_DRIVER: 6679 if (!sas++) drvname = "SAS host"; 6680 break; 6681 case MPTLAN_DRIVER: 6682 if (!lan++) drvname = "LAN"; 6683 break; 6684 case MPTSTM_DRIVER: 6685 if (!targ++) drvname = "SCSI target"; 6686 break; 6687 case MPTCTL_DRIVER: 6688 if (!ctl++) drvname = "ioctl"; 6689 break; 6690 } 6691 6692 if (drvname) 6693 seq_printf(m, " Fusion MPT %s driver\n", drvname); 6694 } 6695 } 6696 6697 return 0; 6698 } 6699 6700 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v) 6701 { 6702 MPT_ADAPTER *ioc = m->private; 6703 char expVer[32]; 6704 int sz; 6705 int p; 6706 6707 mpt_get_fw_exp_ver(expVer, ioc); 6708 6709 seq_printf(m, "%s:", ioc->name); 6710 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) 6711 seq_printf(m, " (f/w download boot flag set)"); 6712 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL) 6713 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!"); 6714 6715 seq_printf(m, "\n ProductID = 0x%04x (%s)\n", 6716 ioc->facts.ProductID, 6717 ioc->prod_name); 6718 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer); 6719 if (ioc->facts.FWImageSize) 6720 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize); 6721 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion); 6722 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit); 6723 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState); 6724 6725 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n", 6726 ioc->facts.CurrentHostMfaHighAddr); 6727 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n", 6728 ioc->facts.CurrentSenseBufferHighAddr); 6729 6730 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth); 6731 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize); 6732 6733 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n", 6734 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma); 6735 /* 6736 * Rounding UP to nearest 4-kB boundary here... 6737 */ 6738 sz = (ioc->req_sz * ioc->req_depth) + 128; 6739 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000; 6740 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n", 6741 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz); 6742 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n", 6743 4*ioc->facts.RequestFrameSize, 6744 ioc->facts.GlobalCredits); 6745 6746 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n", 6747 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma); 6748 sz = (ioc->reply_sz * ioc->reply_depth) + 128; 6749 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n", 6750 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz); 6751 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n", 6752 ioc->facts.CurReplyFrameSize, 6753 ioc->facts.ReplyQueueDepth); 6754 6755 seq_printf(m, " MaxDevices = %d\n", 6756 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices); 6757 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses); 6758 6759 /* per-port info */ 6760 for (p=0; p < ioc->facts.NumberOfPorts; p++) { 6761 seq_printf(m, " PortNumber = %d (of %d)\n", 6762 p+1, 6763 ioc->facts.NumberOfPorts); 6764 if (ioc->bus_type == FC) { 6765 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) { 6766 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6767 seq_printf(m, " LanAddr = %pMR\n", a); 6768 } 6769 seq_printf(m, " WWN = %08X%08X:%08X%08X\n", 6770 ioc->fc_port_page0[p].WWNN.High, 6771 ioc->fc_port_page0[p].WWNN.Low, 6772 ioc->fc_port_page0[p].WWPN.High, 6773 ioc->fc_port_page0[p].WWPN.Low); 6774 } 6775 } 6776 6777 return 0; 6778 } 6779 #endif /* CONFIG_PROC_FS } */ 6780 6781 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6782 static void 6783 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc) 6784 { 6785 buf[0] ='\0'; 6786 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) { 6787 sprintf(buf, " (Exp %02d%02d)", 6788 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */ 6789 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */ 6790 6791 /* insider hack! */ 6792 if ((ioc->facts.FWVersion.Word >> 8) & 0x80) 6793 strcat(buf, " [MDBG]"); 6794 } 6795 } 6796 6797 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 6798 /** 6799 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer. 6800 * @ioc: Pointer to MPT_ADAPTER structure 6801 * @buffer: Pointer to buffer where IOC summary info should be written 6802 * @size: Pointer to number of bytes we wrote (set by this routine) 6803 * @len: Offset at which to start writing in buffer 6804 * @showlan: Display LAN stuff? 6805 * 6806 * This routine writes (english readable) ASCII text, which represents 6807 * a summary of IOC information, to a buffer. 6808 */ 6809 void 6810 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan) 6811 { 6812 char expVer[32]; 6813 int y; 6814 6815 mpt_get_fw_exp_ver(expVer, ioc); 6816 6817 /* 6818 * Shorter summary of attached ioc's... 6819 */ 6820 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6821 ioc->name, 6822 ioc->prod_name, 6823 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6824 ioc->facts.FWVersion.Word, 6825 expVer, 6826 ioc->facts.NumberOfPorts, 6827 ioc->req_depth); 6828 6829 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6830 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6831 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a); 6832 } 6833 6834 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq); 6835 6836 if (!ioc->active) 6837 y += sprintf(buffer+len+y, " (disabled)"); 6838 6839 y += sprintf(buffer+len+y, "\n"); 6840 6841 *size = y; 6842 } 6843 6844 #ifdef CONFIG_PROC_FS 6845 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan) 6846 { 6847 char expVer[32]; 6848 6849 mpt_get_fw_exp_ver(expVer, ioc); 6850 6851 /* 6852 * Shorter summary of attached ioc's... 6853 */ 6854 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d", 6855 ioc->name, 6856 ioc->prod_name, 6857 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */ 6858 ioc->facts.FWVersion.Word, 6859 expVer, 6860 ioc->facts.NumberOfPorts, 6861 ioc->req_depth); 6862 6863 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) { 6864 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow; 6865 seq_printf(m, ", LanAddr=%pMR", a); 6866 } 6867 6868 seq_printf(m, ", IRQ=%d", ioc->pci_irq); 6869 6870 if (!ioc->active) 6871 seq_printf(m, " (disabled)"); 6872 6873 seq_putc(m, '\n'); 6874 } 6875 #endif 6876 6877 /** 6878 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management 6879 * @ioc: Pointer to MPT_ADAPTER structure 6880 * 6881 * Returns 0 for SUCCESS or -1 if FAILED. 6882 * 6883 * If -1 is return, then it was not possible to set the flags 6884 **/ 6885 int 6886 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6887 { 6888 unsigned long flags; 6889 int retval; 6890 6891 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6892 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress || 6893 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) { 6894 retval = -1; 6895 goto out; 6896 } 6897 retval = 0; 6898 ioc->taskmgmt_in_progress = 1; 6899 ioc->taskmgmt_quiesce_io = 1; 6900 if (ioc->alt_ioc) { 6901 ioc->alt_ioc->taskmgmt_in_progress = 1; 6902 ioc->alt_ioc->taskmgmt_quiesce_io = 1; 6903 } 6904 out: 6905 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6906 return retval; 6907 } 6908 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag); 6909 6910 /** 6911 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management 6912 * @ioc: Pointer to MPT_ADAPTER structure 6913 * 6914 **/ 6915 void 6916 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc) 6917 { 6918 unsigned long flags; 6919 6920 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 6921 ioc->taskmgmt_in_progress = 0; 6922 ioc->taskmgmt_quiesce_io = 0; 6923 if (ioc->alt_ioc) { 6924 ioc->alt_ioc->taskmgmt_in_progress = 0; 6925 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 6926 } 6927 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 6928 } 6929 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag); 6930 6931 6932 /** 6933 * mpt_halt_firmware - Halts the firmware if it is operational and panic 6934 * the kernel 6935 * @ioc: Pointer to MPT_ADAPTER structure 6936 * 6937 **/ 6938 void __noreturn 6939 mpt_halt_firmware(MPT_ADAPTER *ioc) 6940 { 6941 u32 ioc_raw_state; 6942 6943 ioc_raw_state = mpt_GetIocState(ioc, 0); 6944 6945 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) { 6946 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n", 6947 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6948 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name, 6949 ioc_raw_state & MPI_DOORBELL_DATA_MASK); 6950 } else { 6951 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00); 6952 panic("%s: Firmware is halted due to command timeout\n", 6953 ioc->name); 6954 } 6955 } 6956 EXPORT_SYMBOL(mpt_halt_firmware); 6957 6958 /** 6959 * mpt_SoftResetHandler - Issues a less expensive reset 6960 * @ioc: Pointer to MPT_ADAPTER structure 6961 * @sleepFlag: Indicates if sleep or schedule must be called. 6962 * 6963 * Returns 0 for SUCCESS or -1 if FAILED. 6964 * 6965 * Message Unit Reset - instructs the IOC to reset the Reply Post and 6966 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. 6967 * All posted buffers are freed, and event notification is turned off. 6968 * IOC doesn't reply to any outstanding request. This will transfer IOC 6969 * to READY state. 6970 **/ 6971 static int 6972 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 6973 { 6974 int rc; 6975 int ii; 6976 u8 cb_idx; 6977 unsigned long flags; 6978 u32 ioc_state; 6979 unsigned long time_count; 6980 6981 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", 6982 ioc->name)); 6983 6984 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 6985 6986 if (mpt_fwfault_debug) 6987 mpt_halt_firmware(ioc); 6988 6989 if (ioc_state == MPI_IOC_STATE_FAULT || 6990 ioc_state == MPI_IOC_STATE_RESET) { 6991 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6992 "skipping, either in FAULT or RESET state!\n", ioc->name)); 6993 return -1; 6994 } 6995 6996 if (ioc->bus_type == FC) { 6997 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 6998 "skipping, because the bus type is FC!\n", ioc->name)); 6999 return -1; 7000 } 7001 7002 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7003 if (ioc->ioc_reset_in_progress) { 7004 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7005 return -1; 7006 } 7007 ioc->ioc_reset_in_progress = 1; 7008 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7009 7010 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7011 if (MptResetHandlers[cb_idx]) 7012 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7013 } 7014 7015 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7016 if (ioc->taskmgmt_in_progress) { 7017 ioc->ioc_reset_in_progress = 0; 7018 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7019 return -1; 7020 } 7021 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7022 /* Disable reply interrupts (also blocks FreeQ) */ 7023 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); 7024 ioc->active = 0; 7025 time_count = jiffies; 7026 7027 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); 7028 7029 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7030 if (MptResetHandlers[cb_idx]) 7031 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); 7032 } 7033 7034 if (rc) 7035 goto out; 7036 7037 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; 7038 if (ioc_state != MPI_IOC_STATE_READY) 7039 goto out; 7040 7041 for (ii = 0; ii < 5; ii++) { 7042 /* Get IOC facts! Allow 5 retries */ 7043 rc = GetIocFacts(ioc, sleepFlag, 7044 MPT_HOSTEVENT_IOC_RECOVER); 7045 if (rc == 0) 7046 break; 7047 if (sleepFlag == CAN_SLEEP) 7048 msleep(100); 7049 else 7050 mdelay(100); 7051 } 7052 if (ii == 5) 7053 goto out; 7054 7055 rc = PrimeIocFifos(ioc); 7056 if (rc != 0) 7057 goto out; 7058 7059 rc = SendIocInit(ioc, sleepFlag); 7060 if (rc != 0) 7061 goto out; 7062 7063 rc = SendEventNotification(ioc, 1, sleepFlag); 7064 if (rc != 0) 7065 goto out; 7066 7067 if (ioc->hard_resets < -1) 7068 ioc->hard_resets++; 7069 7070 /* 7071 * At this point, we know soft reset succeeded. 7072 */ 7073 7074 ioc->active = 1; 7075 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); 7076 7077 out: 7078 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7079 ioc->ioc_reset_in_progress = 0; 7080 ioc->taskmgmt_quiesce_io = 0; 7081 ioc->taskmgmt_in_progress = 0; 7082 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7083 7084 if (ioc->active) { /* otherwise, hard reset coming */ 7085 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7086 if (MptResetHandlers[cb_idx]) 7087 mpt_signal_reset(cb_idx, ioc, 7088 MPT_IOC_POST_RESET); 7089 } 7090 } 7091 7092 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7093 "SoftResetHandler: completed (%d seconds): %s\n", 7094 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, 7095 ((rc == 0) ? "SUCCESS" : "FAILED"))); 7096 7097 return rc; 7098 } 7099 7100 /** 7101 * mpt_Soft_Hard_ResetHandler - Try less expensive reset 7102 * @ioc: Pointer to MPT_ADAPTER structure 7103 * @sleepFlag: Indicates if sleep or schedule must be called. 7104 * 7105 * Returns 0 for SUCCESS or -1 if FAILED. 7106 * Try for softreset first, only if it fails go for expensive 7107 * HardReset. 7108 **/ 7109 int 7110 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { 7111 int ret = -1; 7112 7113 ret = mpt_SoftResetHandler(ioc, sleepFlag); 7114 if (ret == 0) 7115 return ret; 7116 ret = mpt_HardResetHandler(ioc, sleepFlag); 7117 return ret; 7118 } 7119 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); 7120 7121 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7122 /* 7123 * Reset Handling 7124 */ 7125 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7126 /** 7127 * mpt_HardResetHandler - Generic reset handler 7128 * @ioc: Pointer to MPT_ADAPTER structure 7129 * @sleepFlag: Indicates if sleep or schedule must be called. 7130 * 7131 * Issues SCSI Task Management call based on input arg values. 7132 * If TaskMgmt fails, returns associated SCSI request. 7133 * 7134 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer) 7135 * or a non-interrupt thread. In the former, must not call schedule(). 7136 * 7137 * Note: A return of -1 is a FATAL error case, as it means a 7138 * FW reload/initialization failed. 7139 * 7140 * Returns 0 for SUCCESS or -1 if FAILED. 7141 */ 7142 int 7143 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag) 7144 { 7145 int rc; 7146 u8 cb_idx; 7147 unsigned long flags; 7148 unsigned long time_count; 7149 7150 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name)); 7151 #ifdef MFCNT 7152 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name); 7153 printk("MF count 0x%x !\n", ioc->mfcnt); 7154 #endif 7155 if (mpt_fwfault_debug) 7156 mpt_halt_firmware(ioc); 7157 7158 /* Reset the adapter. Prevent more than 1 call to 7159 * mpt_do_ioc_recovery at any instant in time. 7160 */ 7161 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7162 if (ioc->ioc_reset_in_progress) { 7163 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7164 ioc->wait_on_reset_completion = 1; 7165 do { 7166 ssleep(1); 7167 } while (ioc->ioc_reset_in_progress == 1); 7168 ioc->wait_on_reset_completion = 0; 7169 return ioc->reset_status; 7170 } 7171 if (ioc->wait_on_reset_completion) { 7172 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7173 rc = 0; 7174 time_count = jiffies; 7175 goto exit; 7176 } 7177 ioc->ioc_reset_in_progress = 1; 7178 if (ioc->alt_ioc) 7179 ioc->alt_ioc->ioc_reset_in_progress = 1; 7180 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7181 7182 7183 /* The SCSI driver needs to adjust timeouts on all current 7184 * commands prior to the diagnostic reset being issued. 7185 * Prevents timeouts occurring during a diagnostic reset...very bad. 7186 * For all other protocol drivers, this is a no-op. 7187 */ 7188 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7189 if (MptResetHandlers[cb_idx]) { 7190 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); 7191 if (ioc->alt_ioc) 7192 mpt_signal_reset(cb_idx, ioc->alt_ioc, 7193 MPT_IOC_SETUP_RESET); 7194 } 7195 } 7196 7197 time_count = jiffies; 7198 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag); 7199 if (rc != 0) { 7200 printk(KERN_WARNING MYNAM 7201 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n", 7202 rc, ioc->name, mpt_GetIocState(ioc, 0)); 7203 } else { 7204 if (ioc->hard_resets < -1) 7205 ioc->hard_resets++; 7206 } 7207 7208 spin_lock_irqsave(&ioc->taskmgmt_lock, flags); 7209 ioc->ioc_reset_in_progress = 0; 7210 ioc->taskmgmt_quiesce_io = 0; 7211 ioc->taskmgmt_in_progress = 0; 7212 ioc->reset_status = rc; 7213 if (ioc->alt_ioc) { 7214 ioc->alt_ioc->ioc_reset_in_progress = 0; 7215 ioc->alt_ioc->taskmgmt_quiesce_io = 0; 7216 ioc->alt_ioc->taskmgmt_in_progress = 0; 7217 } 7218 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); 7219 7220 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7221 if (MptResetHandlers[cb_idx]) { 7222 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET); 7223 if (ioc->alt_ioc) 7224 mpt_signal_reset(cb_idx, 7225 ioc->alt_ioc, MPT_IOC_POST_RESET); 7226 } 7227 } 7228 exit: 7229 dtmprintk(ioc, 7230 printk(MYIOC_s_DEBUG_FMT 7231 "HardResetHandler: completed (%d seconds): %s\n", ioc->name, 7232 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ? 7233 "SUCCESS" : "FAILED"))); 7234 7235 return rc; 7236 } 7237 7238 #ifdef CONFIG_FUSION_LOGGING 7239 static void 7240 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply) 7241 { 7242 char *ds = NULL; 7243 u32 evData0; 7244 int ii; 7245 u8 event; 7246 char *evStr = ioc->evStr; 7247 7248 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7249 evData0 = le32_to_cpu(pEventReply->Data[0]); 7250 7251 switch(event) { 7252 case MPI_EVENT_NONE: 7253 ds = "None"; 7254 break; 7255 case MPI_EVENT_LOG_DATA: 7256 ds = "Log Data"; 7257 break; 7258 case MPI_EVENT_STATE_CHANGE: 7259 ds = "State Change"; 7260 break; 7261 case MPI_EVENT_UNIT_ATTENTION: 7262 ds = "Unit Attention"; 7263 break; 7264 case MPI_EVENT_IOC_BUS_RESET: 7265 ds = "IOC Bus Reset"; 7266 break; 7267 case MPI_EVENT_EXT_BUS_RESET: 7268 ds = "External Bus Reset"; 7269 break; 7270 case MPI_EVENT_RESCAN: 7271 ds = "Bus Rescan Event"; 7272 break; 7273 case MPI_EVENT_LINK_STATUS_CHANGE: 7274 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE) 7275 ds = "Link Status(FAILURE) Change"; 7276 else 7277 ds = "Link Status(ACTIVE) Change"; 7278 break; 7279 case MPI_EVENT_LOOP_STATE_CHANGE: 7280 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP) 7281 ds = "Loop State(LIP) Change"; 7282 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE) 7283 ds = "Loop State(LPE) Change"; 7284 else 7285 ds = "Loop State(LPB) Change"; 7286 break; 7287 case MPI_EVENT_LOGOUT: 7288 ds = "Logout"; 7289 break; 7290 case MPI_EVENT_EVENT_CHANGE: 7291 if (evData0) 7292 ds = "Events ON"; 7293 else 7294 ds = "Events OFF"; 7295 break; 7296 case MPI_EVENT_INTEGRATED_RAID: 7297 { 7298 u8 ReasonCode = (u8)(evData0 >> 16); 7299 switch (ReasonCode) { 7300 case MPI_EVENT_RAID_RC_VOLUME_CREATED : 7301 ds = "Integrated Raid: Volume Created"; 7302 break; 7303 case MPI_EVENT_RAID_RC_VOLUME_DELETED : 7304 ds = "Integrated Raid: Volume Deleted"; 7305 break; 7306 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED : 7307 ds = "Integrated Raid: Volume Settings Changed"; 7308 break; 7309 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED : 7310 ds = "Integrated Raid: Volume Status Changed"; 7311 break; 7312 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED : 7313 ds = "Integrated Raid: Volume Physdisk Changed"; 7314 break; 7315 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED : 7316 ds = "Integrated Raid: Physdisk Created"; 7317 break; 7318 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED : 7319 ds = "Integrated Raid: Physdisk Deleted"; 7320 break; 7321 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED : 7322 ds = "Integrated Raid: Physdisk Settings Changed"; 7323 break; 7324 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED : 7325 ds = "Integrated Raid: Physdisk Status Changed"; 7326 break; 7327 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED : 7328 ds = "Integrated Raid: Domain Validation Needed"; 7329 break; 7330 case MPI_EVENT_RAID_RC_SMART_DATA : 7331 ds = "Integrated Raid; Smart Data"; 7332 break; 7333 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED : 7334 ds = "Integrated Raid: Replace Action Started"; 7335 break; 7336 default: 7337 ds = "Integrated Raid"; 7338 break; 7339 } 7340 break; 7341 } 7342 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: 7343 ds = "SCSI Device Status Change"; 7344 break; 7345 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: 7346 { 7347 u8 id = (u8)(evData0); 7348 u8 channel = (u8)(evData0 >> 8); 7349 u8 ReasonCode = (u8)(evData0 >> 16); 7350 switch (ReasonCode) { 7351 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: 7352 snprintf(evStr, EVENT_DESCR_STR_SZ, 7353 "SAS Device Status Change: Added: " 7354 "id=%d channel=%d", id, channel); 7355 break; 7356 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: 7357 snprintf(evStr, EVENT_DESCR_STR_SZ, 7358 "SAS Device Status Change: Deleted: " 7359 "id=%d channel=%d", id, channel); 7360 break; 7361 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: 7362 snprintf(evStr, EVENT_DESCR_STR_SZ, 7363 "SAS Device Status Change: SMART Data: " 7364 "id=%d channel=%d", id, channel); 7365 break; 7366 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: 7367 snprintf(evStr, EVENT_DESCR_STR_SZ, 7368 "SAS Device Status Change: No Persistency: " 7369 "id=%d channel=%d", id, channel); 7370 break; 7371 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: 7372 snprintf(evStr, EVENT_DESCR_STR_SZ, 7373 "SAS Device Status Change: Unsupported Device " 7374 "Discovered : id=%d channel=%d", id, channel); 7375 break; 7376 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: 7377 snprintf(evStr, EVENT_DESCR_STR_SZ, 7378 "SAS Device Status Change: Internal Device " 7379 "Reset : id=%d channel=%d", id, channel); 7380 break; 7381 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: 7382 snprintf(evStr, EVENT_DESCR_STR_SZ, 7383 "SAS Device Status Change: Internal Task " 7384 "Abort : id=%d channel=%d", id, channel); 7385 break; 7386 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: 7387 snprintf(evStr, EVENT_DESCR_STR_SZ, 7388 "SAS Device Status Change: Internal Abort " 7389 "Task Set : id=%d channel=%d", id, channel); 7390 break; 7391 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: 7392 snprintf(evStr, EVENT_DESCR_STR_SZ, 7393 "SAS Device Status Change: Internal Clear " 7394 "Task Set : id=%d channel=%d", id, channel); 7395 break; 7396 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: 7397 snprintf(evStr, EVENT_DESCR_STR_SZ, 7398 "SAS Device Status Change: Internal Query " 7399 "Task : id=%d channel=%d", id, channel); 7400 break; 7401 default: 7402 snprintf(evStr, EVENT_DESCR_STR_SZ, 7403 "SAS Device Status Change: Unknown: " 7404 "id=%d channel=%d", id, channel); 7405 break; 7406 } 7407 break; 7408 } 7409 case MPI_EVENT_ON_BUS_TIMER_EXPIRED: 7410 ds = "Bus Timer Expired"; 7411 break; 7412 case MPI_EVENT_QUEUE_FULL: 7413 { 7414 u16 curr_depth = (u16)(evData0 >> 16); 7415 u8 channel = (u8)(evData0 >> 8); 7416 u8 id = (u8)(evData0); 7417 7418 snprintf(evStr, EVENT_DESCR_STR_SZ, 7419 "Queue Full: channel=%d id=%d depth=%d", 7420 channel, id, curr_depth); 7421 break; 7422 } 7423 case MPI_EVENT_SAS_SES: 7424 ds = "SAS SES Event"; 7425 break; 7426 case MPI_EVENT_PERSISTENT_TABLE_FULL: 7427 ds = "Persistent Table Full"; 7428 break; 7429 case MPI_EVENT_SAS_PHY_LINK_STATUS: 7430 { 7431 u8 LinkRates = (u8)(evData0 >> 8); 7432 u8 PhyNumber = (u8)(evData0); 7433 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >> 7434 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT; 7435 switch (LinkRates) { 7436 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN: 7437 snprintf(evStr, EVENT_DESCR_STR_SZ, 7438 "SAS PHY Link Status: Phy=%d:" 7439 " Rate Unknown",PhyNumber); 7440 break; 7441 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED: 7442 snprintf(evStr, EVENT_DESCR_STR_SZ, 7443 "SAS PHY Link Status: Phy=%d:" 7444 " Phy Disabled",PhyNumber); 7445 break; 7446 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION: 7447 snprintf(evStr, EVENT_DESCR_STR_SZ, 7448 "SAS PHY Link Status: Phy=%d:" 7449 " Failed Speed Nego",PhyNumber); 7450 break; 7451 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE: 7452 snprintf(evStr, EVENT_DESCR_STR_SZ, 7453 "SAS PHY Link Status: Phy=%d:" 7454 " Sata OOB Completed",PhyNumber); 7455 break; 7456 case MPI_EVENT_SAS_PLS_LR_RATE_1_5: 7457 snprintf(evStr, EVENT_DESCR_STR_SZ, 7458 "SAS PHY Link Status: Phy=%d:" 7459 " Rate 1.5 Gbps",PhyNumber); 7460 break; 7461 case MPI_EVENT_SAS_PLS_LR_RATE_3_0: 7462 snprintf(evStr, EVENT_DESCR_STR_SZ, 7463 "SAS PHY Link Status: Phy=%d:" 7464 " Rate 3.0 Gbps", PhyNumber); 7465 break; 7466 case MPI_EVENT_SAS_PLS_LR_RATE_6_0: 7467 snprintf(evStr, EVENT_DESCR_STR_SZ, 7468 "SAS PHY Link Status: Phy=%d:" 7469 " Rate 6.0 Gbps", PhyNumber); 7470 break; 7471 default: 7472 snprintf(evStr, EVENT_DESCR_STR_SZ, 7473 "SAS PHY Link Status: Phy=%d", PhyNumber); 7474 break; 7475 } 7476 break; 7477 } 7478 case MPI_EVENT_SAS_DISCOVERY_ERROR: 7479 ds = "SAS Discovery Error"; 7480 break; 7481 case MPI_EVENT_IR_RESYNC_UPDATE: 7482 { 7483 u8 resync_complete = (u8)(evData0 >> 16); 7484 snprintf(evStr, EVENT_DESCR_STR_SZ, 7485 "IR Resync Update: Complete = %d:",resync_complete); 7486 break; 7487 } 7488 case MPI_EVENT_IR2: 7489 { 7490 u8 id = (u8)(evData0); 7491 u8 channel = (u8)(evData0 >> 8); 7492 u8 phys_num = (u8)(evData0 >> 24); 7493 u8 ReasonCode = (u8)(evData0 >> 16); 7494 7495 switch (ReasonCode) { 7496 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED: 7497 snprintf(evStr, EVENT_DESCR_STR_SZ, 7498 "IR2: LD State Changed: " 7499 "id=%d channel=%d phys_num=%d", 7500 id, channel, phys_num); 7501 break; 7502 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED: 7503 snprintf(evStr, EVENT_DESCR_STR_SZ, 7504 "IR2: PD State Changed " 7505 "id=%d channel=%d phys_num=%d", 7506 id, channel, phys_num); 7507 break; 7508 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL: 7509 snprintf(evStr, EVENT_DESCR_STR_SZ, 7510 "IR2: Bad Block Table Full: " 7511 "id=%d channel=%d phys_num=%d", 7512 id, channel, phys_num); 7513 break; 7514 case MPI_EVENT_IR2_RC_PD_INSERTED: 7515 snprintf(evStr, EVENT_DESCR_STR_SZ, 7516 "IR2: PD Inserted: " 7517 "id=%d channel=%d phys_num=%d", 7518 id, channel, phys_num); 7519 break; 7520 case MPI_EVENT_IR2_RC_PD_REMOVED: 7521 snprintf(evStr, EVENT_DESCR_STR_SZ, 7522 "IR2: PD Removed: " 7523 "id=%d channel=%d phys_num=%d", 7524 id, channel, phys_num); 7525 break; 7526 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED: 7527 snprintf(evStr, EVENT_DESCR_STR_SZ, 7528 "IR2: Foreign CFG Detected: " 7529 "id=%d channel=%d phys_num=%d", 7530 id, channel, phys_num); 7531 break; 7532 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR: 7533 snprintf(evStr, EVENT_DESCR_STR_SZ, 7534 "IR2: Rebuild Medium Error: " 7535 "id=%d channel=%d phys_num=%d", 7536 id, channel, phys_num); 7537 break; 7538 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED: 7539 snprintf(evStr, EVENT_DESCR_STR_SZ, 7540 "IR2: Dual Port Added: " 7541 "id=%d channel=%d phys_num=%d", 7542 id, channel, phys_num); 7543 break; 7544 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED: 7545 snprintf(evStr, EVENT_DESCR_STR_SZ, 7546 "IR2: Dual Port Removed: " 7547 "id=%d channel=%d phys_num=%d", 7548 id, channel, phys_num); 7549 break; 7550 default: 7551 ds = "IR2"; 7552 break; 7553 } 7554 break; 7555 } 7556 case MPI_EVENT_SAS_DISCOVERY: 7557 { 7558 if (evData0) 7559 ds = "SAS Discovery: Start"; 7560 else 7561 ds = "SAS Discovery: Stop"; 7562 break; 7563 } 7564 case MPI_EVENT_LOG_ENTRY_ADDED: 7565 ds = "SAS Log Entry Added"; 7566 break; 7567 7568 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE: 7569 { 7570 u8 phy_num = (u8)(evData0); 7571 u8 port_num = (u8)(evData0 >> 8); 7572 u8 port_width = (u8)(evData0 >> 16); 7573 u8 primitive = (u8)(evData0 >> 24); 7574 snprintf(evStr, EVENT_DESCR_STR_SZ, 7575 "SAS Broadcast Primitive: phy=%d port=%d " 7576 "width=%d primitive=0x%02x", 7577 phy_num, port_num, port_width, primitive); 7578 break; 7579 } 7580 7581 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: 7582 { 7583 u8 reason = (u8)(evData0); 7584 7585 switch (reason) { 7586 case MPI_EVENT_SAS_INIT_RC_ADDED: 7587 ds = "SAS Initiator Status Change: Added"; 7588 break; 7589 case MPI_EVENT_SAS_INIT_RC_REMOVED: 7590 ds = "SAS Initiator Status Change: Deleted"; 7591 break; 7592 default: 7593 ds = "SAS Initiator Status Change"; 7594 break; 7595 } 7596 break; 7597 } 7598 7599 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW: 7600 { 7601 u8 max_init = (u8)(evData0); 7602 u8 current_init = (u8)(evData0 >> 8); 7603 7604 snprintf(evStr, EVENT_DESCR_STR_SZ, 7605 "SAS Initiator Device Table Overflow: max initiators=%02d " 7606 "current initiators=%02d", 7607 max_init, current_init); 7608 break; 7609 } 7610 case MPI_EVENT_SAS_SMP_ERROR: 7611 { 7612 u8 status = (u8)(evData0); 7613 u8 port_num = (u8)(evData0 >> 8); 7614 u8 result = (u8)(evData0 >> 16); 7615 7616 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID) 7617 snprintf(evStr, EVENT_DESCR_STR_SZ, 7618 "SAS SMP Error: port=%d result=0x%02x", 7619 port_num, result); 7620 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR) 7621 snprintf(evStr, EVENT_DESCR_STR_SZ, 7622 "SAS SMP Error: port=%d : CRC Error", 7623 port_num); 7624 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT) 7625 snprintf(evStr, EVENT_DESCR_STR_SZ, 7626 "SAS SMP Error: port=%d : Timeout", 7627 port_num); 7628 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION) 7629 snprintf(evStr, EVENT_DESCR_STR_SZ, 7630 "SAS SMP Error: port=%d : No Destination", 7631 port_num); 7632 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION) 7633 snprintf(evStr, EVENT_DESCR_STR_SZ, 7634 "SAS SMP Error: port=%d : Bad Destination", 7635 port_num); 7636 else 7637 snprintf(evStr, EVENT_DESCR_STR_SZ, 7638 "SAS SMP Error: port=%d : status=0x%02x", 7639 port_num, status); 7640 break; 7641 } 7642 7643 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE: 7644 { 7645 u8 reason = (u8)(evData0); 7646 7647 switch (reason) { 7648 case MPI_EVENT_SAS_EXP_RC_ADDED: 7649 ds = "Expander Status Change: Added"; 7650 break; 7651 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING: 7652 ds = "Expander Status Change: Deleted"; 7653 break; 7654 default: 7655 ds = "Expander Status Change"; 7656 break; 7657 } 7658 break; 7659 } 7660 7661 /* 7662 * MPT base "custom" events may be added here... 7663 */ 7664 default: 7665 ds = "Unknown"; 7666 break; 7667 } 7668 if (ds) 7669 strscpy(evStr, ds, EVENT_DESCR_STR_SZ); 7670 7671 7672 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7673 "MPT event:(%02Xh) : %s\n", 7674 ioc->name, event, evStr)); 7675 7676 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM 7677 ": Event data:\n")); 7678 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++) 7679 devtverboseprintk(ioc, printk(" %08x", 7680 le32_to_cpu(pEventReply->Data[ii]))); 7681 devtverboseprintk(ioc, printk(KERN_DEBUG "\n")); 7682 } 7683 #endif 7684 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7685 /** 7686 * ProcessEventNotification - Route EventNotificationReply to all event handlers 7687 * @ioc: Pointer to MPT_ADAPTER structure 7688 * @pEventReply: Pointer to EventNotification reply frame 7689 * @evHandlers: Pointer to integer, number of event handlers 7690 * 7691 * Routes a received EventNotificationReply to all currently registered 7692 * event handlers. 7693 * Returns sum of event handlers return values. 7694 */ 7695 static int 7696 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers) 7697 { 7698 u16 evDataLen; 7699 u32 evData0 = 0; 7700 int ii; 7701 u8 cb_idx; 7702 int r = 0; 7703 int handlers = 0; 7704 u8 event; 7705 7706 /* 7707 * Do platform normalization of values 7708 */ 7709 event = le32_to_cpu(pEventReply->Event) & 0xFF; 7710 evDataLen = le16_to_cpu(pEventReply->EventDataLength); 7711 if (evDataLen) { 7712 evData0 = le32_to_cpu(pEventReply->Data[0]); 7713 } 7714 7715 #ifdef CONFIG_FUSION_LOGGING 7716 if (evDataLen) 7717 mpt_display_event_info(ioc, pEventReply); 7718 #endif 7719 7720 /* 7721 * Do general / base driver event processing 7722 */ 7723 switch(event) { 7724 case MPI_EVENT_EVENT_CHANGE: /* 0A */ 7725 if (evDataLen) { 7726 u8 evState = evData0 & 0xFF; 7727 7728 /* CHECKME! What if evState unexpectedly says OFF (0)? */ 7729 7730 /* Update EventState field in cached IocFacts */ 7731 if (ioc->facts.Function) { 7732 ioc->facts.EventState = evState; 7733 } 7734 } 7735 break; 7736 case MPI_EVENT_INTEGRATED_RAID: 7737 mptbase_raid_process_event_data(ioc, 7738 (MpiEventDataRaid_t *)pEventReply->Data); 7739 break; 7740 default: 7741 break; 7742 } 7743 7744 /* 7745 * Should this event be logged? Events are written sequentially. 7746 * When buffer is full, start again at the top. 7747 */ 7748 if (ioc->events && (ioc->eventTypes & ( 1 << event))) { 7749 int idx; 7750 7751 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE; 7752 7753 ioc->events[idx].event = event; 7754 ioc->events[idx].eventContext = ioc->eventContext; 7755 7756 for (ii = 0; ii < 2; ii++) { 7757 if (ii < evDataLen) 7758 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]); 7759 else 7760 ioc->events[idx].data[ii] = 0; 7761 } 7762 7763 ioc->eventContext++; 7764 } 7765 7766 7767 /* 7768 * Call each currently registered protocol event handler. 7769 */ 7770 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { 7771 if (MptEvHandlers[cb_idx]) { 7772 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7773 "Routing Event to event handler #%d\n", 7774 ioc->name, cb_idx)); 7775 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply); 7776 handlers++; 7777 } 7778 } 7779 /* FIXME? Examine results here? */ 7780 7781 /* 7782 * If needed, send (a single) EventAck. 7783 */ 7784 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) { 7785 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT 7786 "EventAck required\n",ioc->name)); 7787 if ((ii = SendEventAck(ioc, pEventReply)) != 0) { 7788 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n", 7789 ioc->name, ii)); 7790 } 7791 } 7792 7793 *evHandlers = handlers; 7794 return r; 7795 } 7796 7797 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7798 /** 7799 * mpt_fc_log_info - Log information returned from Fibre Channel IOC. 7800 * @ioc: Pointer to MPT_ADAPTER structure 7801 * @log_info: U32 LogInfo reply word from the IOC 7802 * 7803 * Refer to lsi/mpi_log_fc.h. 7804 */ 7805 static void 7806 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info) 7807 { 7808 char *desc = "unknown"; 7809 7810 switch (log_info & 0xFF000000) { 7811 case MPI_IOCLOGINFO_FC_INIT_BASE: 7812 desc = "FCP Initiator"; 7813 break; 7814 case MPI_IOCLOGINFO_FC_TARGET_BASE: 7815 desc = "FCP Target"; 7816 break; 7817 case MPI_IOCLOGINFO_FC_LAN_BASE: 7818 desc = "LAN"; 7819 break; 7820 case MPI_IOCLOGINFO_FC_MSG_BASE: 7821 desc = "MPI Message Layer"; 7822 break; 7823 case MPI_IOCLOGINFO_FC_LINK_BASE: 7824 desc = "FC Link"; 7825 break; 7826 case MPI_IOCLOGINFO_FC_CTX_BASE: 7827 desc = "Context Manager"; 7828 break; 7829 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET: 7830 desc = "Invalid Field Offset"; 7831 break; 7832 case MPI_IOCLOGINFO_FC_STATE_CHANGE: 7833 desc = "State Change Info"; 7834 break; 7835 } 7836 7837 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n", 7838 ioc->name, log_info, desc, (log_info & 0xFFFFFF)); 7839 } 7840 7841 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 7842 /** 7843 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC. 7844 * @ioc: Pointer to MPT_ADAPTER structure 7845 * @log_info: U32 LogInfo word from the IOC 7846 * 7847 * Refer to lsi/sp_log.h. 7848 */ 7849 static void 7850 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) 7851 { 7852 u32 info = log_info & 0x00FF0000; 7853 char *desc = "unknown"; 7854 7855 switch (info) { 7856 case 0x00010000: 7857 desc = "bug! MID not found"; 7858 break; 7859 7860 case 0x00020000: 7861 desc = "Parity Error"; 7862 break; 7863 7864 case 0x00030000: 7865 desc = "ASYNC Outbound Overrun"; 7866 break; 7867 7868 case 0x00040000: 7869 desc = "SYNC Offset Error"; 7870 break; 7871 7872 case 0x00050000: 7873 desc = "BM Change"; 7874 break; 7875 7876 case 0x00060000: 7877 desc = "Msg In Overflow"; 7878 break; 7879 7880 case 0x00070000: 7881 desc = "DMA Error"; 7882 break; 7883 7884 case 0x00080000: 7885 desc = "Outbound DMA Overrun"; 7886 break; 7887 7888 case 0x00090000: 7889 desc = "Task Management"; 7890 break; 7891 7892 case 0x000A0000: 7893 desc = "Device Problem"; 7894 break; 7895 7896 case 0x000B0000: 7897 desc = "Invalid Phase Change"; 7898 break; 7899 7900 case 0x000C0000: 7901 desc = "Untagged Table Size"; 7902 break; 7903 7904 } 7905 7906 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); 7907 } 7908 7909 /* strings for sas loginfo */ 7910 static char *originator_str[] = { 7911 "IOP", /* 00h */ 7912 "PL", /* 01h */ 7913 "IR" /* 02h */ 7914 }; 7915 static char *iop_code_str[] = { 7916 NULL, /* 00h */ 7917 "Invalid SAS Address", /* 01h */ 7918 NULL, /* 02h */ 7919 "Invalid Page", /* 03h */ 7920 "Diag Message Error", /* 04h */ 7921 "Task Terminated", /* 05h */ 7922 "Enclosure Management", /* 06h */ 7923 "Target Mode" /* 07h */ 7924 }; 7925 static char *pl_code_str[] = { 7926 NULL, /* 00h */ 7927 "Open Failure", /* 01h */ 7928 "Invalid Scatter Gather List", /* 02h */ 7929 "Wrong Relative Offset or Frame Length", /* 03h */ 7930 "Frame Transfer Error", /* 04h */ 7931 "Transmit Frame Connected Low", /* 05h */ 7932 "SATA Non-NCQ RW Error Bit Set", /* 06h */ 7933 "SATA Read Log Receive Data Error", /* 07h */ 7934 "SATA NCQ Fail All Commands After Error", /* 08h */ 7935 "SATA Error in Receive Set Device Bit FIS", /* 09h */ 7936 "Receive Frame Invalid Message", /* 0Ah */ 7937 "Receive Context Message Valid Error", /* 0Bh */ 7938 "Receive Frame Current Frame Error", /* 0Ch */ 7939 "SATA Link Down", /* 0Dh */ 7940 "Discovery SATA Init W IOS", /* 0Eh */ 7941 "Config Invalid Page", /* 0Fh */ 7942 "Discovery SATA Init Timeout", /* 10h */ 7943 "Reset", /* 11h */ 7944 "Abort", /* 12h */ 7945 "IO Not Yet Executed", /* 13h */ 7946 "IO Executed", /* 14h */ 7947 "Persistent Reservation Out Not Affiliation " 7948 "Owner", /* 15h */ 7949 "Open Transmit DMA Abort", /* 16h */ 7950 "IO Device Missing Delay Retry", /* 17h */ 7951 "IO Cancelled Due to Receive Error", /* 18h */ 7952 NULL, /* 19h */ 7953 NULL, /* 1Ah */ 7954 NULL, /* 1Bh */ 7955 NULL, /* 1Ch */ 7956 NULL, /* 1Dh */ 7957 NULL, /* 1Eh */ 7958 NULL, /* 1Fh */ 7959 "Enclosure Management" /* 20h */ 7960 }; 7961 static char *ir_code_str[] = { 7962 "Raid Action Error", /* 00h */ 7963 NULL, /* 00h */ 7964 NULL, /* 01h */ 7965 NULL, /* 02h */ 7966 NULL, /* 03h */ 7967 NULL, /* 04h */ 7968 NULL, /* 05h */ 7969 NULL, /* 06h */ 7970 NULL /* 07h */ 7971 }; 7972 static char *raid_sub_code_str[] = { 7973 NULL, /* 00h */ 7974 "Volume Creation Failed: Data Passed too " 7975 "Large", /* 01h */ 7976 "Volume Creation Failed: Duplicate Volumes " 7977 "Attempted", /* 02h */ 7978 "Volume Creation Failed: Max Number " 7979 "Supported Volumes Exceeded", /* 03h */ 7980 "Volume Creation Failed: DMA Error", /* 04h */ 7981 "Volume Creation Failed: Invalid Volume Type", /* 05h */ 7982 "Volume Creation Failed: Error Reading " 7983 "MFG Page 4", /* 06h */ 7984 "Volume Creation Failed: Creating Internal " 7985 "Structures", /* 07h */ 7986 NULL, /* 08h */ 7987 NULL, /* 09h */ 7988 NULL, /* 0Ah */ 7989 NULL, /* 0Bh */ 7990 NULL, /* 0Ch */ 7991 NULL, /* 0Dh */ 7992 NULL, /* 0Eh */ 7993 NULL, /* 0Fh */ 7994 "Activation failed: Already Active Volume", /* 10h */ 7995 "Activation failed: Unsupported Volume Type", /* 11h */ 7996 "Activation failed: Too Many Active Volumes", /* 12h */ 7997 "Activation failed: Volume ID in Use", /* 13h */ 7998 "Activation failed: Reported Failure", /* 14h */ 7999 "Activation failed: Importing a Volume", /* 15h */ 8000 NULL, /* 16h */ 8001 NULL, /* 17h */ 8002 NULL, /* 18h */ 8003 NULL, /* 19h */ 8004 NULL, /* 1Ah */ 8005 NULL, /* 1Bh */ 8006 NULL, /* 1Ch */ 8007 NULL, /* 1Dh */ 8008 NULL, /* 1Eh */ 8009 NULL, /* 1Fh */ 8010 "Phys Disk failed: Too Many Phys Disks", /* 20h */ 8011 "Phys Disk failed: Data Passed too Large", /* 21h */ 8012 "Phys Disk failed: DMA Error", /* 22h */ 8013 "Phys Disk failed: Invalid <channel:id>", /* 23h */ 8014 "Phys Disk failed: Creating Phys Disk Config " 8015 "Page", /* 24h */ 8016 NULL, /* 25h */ 8017 NULL, /* 26h */ 8018 NULL, /* 27h */ 8019 NULL, /* 28h */ 8020 NULL, /* 29h */ 8021 NULL, /* 2Ah */ 8022 NULL, /* 2Bh */ 8023 NULL, /* 2Ch */ 8024 NULL, /* 2Dh */ 8025 NULL, /* 2Eh */ 8026 NULL, /* 2Fh */ 8027 "Compatibility Error: IR Disabled", /* 30h */ 8028 "Compatibility Error: Inquiry Command Failed", /* 31h */ 8029 "Compatibility Error: Device not Direct Access " 8030 "Device ", /* 32h */ 8031 "Compatibility Error: Removable Device Found", /* 33h */ 8032 "Compatibility Error: Device SCSI Version not " 8033 "2 or Higher", /* 34h */ 8034 "Compatibility Error: SATA Device, 48 BIT LBA " 8035 "not Supported", /* 35h */ 8036 "Compatibility Error: Device doesn't have " 8037 "512 Byte Block Sizes", /* 36h */ 8038 "Compatibility Error: Volume Type Check Failed", /* 37h */ 8039 "Compatibility Error: Volume Type is " 8040 "Unsupported by FW", /* 38h */ 8041 "Compatibility Error: Disk Drive too Small for " 8042 "use in Volume", /* 39h */ 8043 "Compatibility Error: Phys Disk for Create " 8044 "Volume not Found", /* 3Ah */ 8045 "Compatibility Error: Too Many or too Few " 8046 "Disks for Volume Type", /* 3Bh */ 8047 "Compatibility Error: Disk stripe Sizes " 8048 "Must be 64KB", /* 3Ch */ 8049 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */ 8050 }; 8051 8052 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8053 /** 8054 * mpt_sas_log_info - Log information returned from SAS IOC. 8055 * @ioc: Pointer to MPT_ADAPTER structure 8056 * @log_info: U32 LogInfo reply word from the IOC 8057 * @cb_idx: callback function's handle 8058 * 8059 * Refer to lsi/mpi_log_sas.h. 8060 **/ 8061 static void 8062 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx) 8063 { 8064 union loginfo_type { 8065 u32 loginfo; 8066 struct { 8067 u32 subcode:16; 8068 u32 code:8; 8069 u32 originator:4; 8070 u32 bus_type:4; 8071 } dw; 8072 }; 8073 union loginfo_type sas_loginfo; 8074 char *originator_desc = NULL; 8075 char *code_desc = NULL; 8076 char *sub_code_desc = NULL; 8077 8078 sas_loginfo.loginfo = log_info; 8079 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && 8080 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str))) 8081 return; 8082 8083 originator_desc = originator_str[sas_loginfo.dw.originator]; 8084 8085 switch (sas_loginfo.dw.originator) { 8086 8087 case 0: /* IOP */ 8088 if (sas_loginfo.dw.code < 8089 ARRAY_SIZE(iop_code_str)) 8090 code_desc = iop_code_str[sas_loginfo.dw.code]; 8091 break; 8092 case 1: /* PL */ 8093 if (sas_loginfo.dw.code < 8094 ARRAY_SIZE(pl_code_str)) 8095 code_desc = pl_code_str[sas_loginfo.dw.code]; 8096 break; 8097 case 2: /* IR */ 8098 if (sas_loginfo.dw.code >= 8099 ARRAY_SIZE(ir_code_str)) 8100 break; 8101 code_desc = ir_code_str[sas_loginfo.dw.code]; 8102 if (sas_loginfo.dw.subcode >= 8103 ARRAY_SIZE(raid_sub_code_str)) 8104 break; 8105 if (sas_loginfo.dw.code == 0) 8106 sub_code_desc = 8107 raid_sub_code_str[sas_loginfo.dw.subcode]; 8108 break; 8109 default: 8110 return; 8111 } 8112 8113 if (sub_code_desc != NULL) 8114 printk(MYIOC_s_INFO_FMT 8115 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8116 " SubCode={%s} cb_idx %s\n", 8117 ioc->name, log_info, originator_desc, code_desc, 8118 sub_code_desc, MptCallbacksName[cb_idx]); 8119 else if (code_desc != NULL) 8120 printk(MYIOC_s_INFO_FMT 8121 "LogInfo(0x%08x): Originator={%s}, Code={%s}," 8122 " SubCode(0x%04x) cb_idx %s\n", 8123 ioc->name, log_info, originator_desc, code_desc, 8124 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]); 8125 else 8126 printk(MYIOC_s_INFO_FMT 8127 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," 8128 " SubCode(0x%04x) cb_idx %s\n", 8129 ioc->name, log_info, originator_desc, 8130 sas_loginfo.dw.code, sas_loginfo.dw.subcode, 8131 MptCallbacksName[cb_idx]); 8132 } 8133 8134 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8135 /** 8136 * mpt_iocstatus_info_config - IOCSTATUS information for config pages 8137 * @ioc: Pointer to MPT_ADAPTER structure 8138 * @ioc_status: U32 IOCStatus word from IOC 8139 * @mf: Pointer to MPT request frame 8140 * 8141 * Refer to lsi/mpi.h. 8142 **/ 8143 static void 8144 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8145 { 8146 Config_t *pReq = (Config_t *)mf; 8147 char extend_desc[EVENT_DESCR_STR_SZ]; 8148 char *desc = NULL; 8149 u32 form; 8150 u8 page_type; 8151 8152 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED) 8153 page_type = pReq->ExtPageType; 8154 else 8155 page_type = pReq->Header.PageType; 8156 8157 /* 8158 * ignore invalid page messages for GET_NEXT_HANDLE 8159 */ 8160 form = le32_to_cpu(pReq->PageAddress); 8161 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { 8162 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE || 8163 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER || 8164 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) { 8165 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) == 8166 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE) 8167 return; 8168 } 8169 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE) 8170 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) == 8171 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 8172 return; 8173 } 8174 8175 snprintf(extend_desc, EVENT_DESCR_STR_SZ, 8176 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh", 8177 page_type, pReq->Header.PageNumber, pReq->Action, form); 8178 8179 switch (ioc_status) { 8180 8181 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8182 desc = "Config Page Invalid Action"; 8183 break; 8184 8185 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8186 desc = "Config Page Invalid Type"; 8187 break; 8188 8189 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8190 desc = "Config Page Invalid Page"; 8191 break; 8192 8193 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8194 desc = "Config Page Invalid Data"; 8195 break; 8196 8197 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8198 desc = "Config Page No Defaults"; 8199 break; 8200 8201 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8202 desc = "Config Page Can't Commit"; 8203 break; 8204 } 8205 8206 if (!desc) 8207 return; 8208 8209 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n", 8210 ioc->name, ioc_status, desc, extend_desc)); 8211 } 8212 8213 /** 8214 * mpt_iocstatus_info - IOCSTATUS information returned from IOC. 8215 * @ioc: Pointer to MPT_ADAPTER structure 8216 * @ioc_status: U32 IOCStatus word from IOC 8217 * @mf: Pointer to MPT request frame 8218 * 8219 * Refer to lsi/mpi.h. 8220 **/ 8221 static void 8222 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf) 8223 { 8224 u32 status = ioc_status & MPI_IOCSTATUS_MASK; 8225 char *desc = NULL; 8226 8227 switch (status) { 8228 8229 /****************************************************************************/ 8230 /* Common IOCStatus values for all replies */ 8231 /****************************************************************************/ 8232 8233 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */ 8234 desc = "Invalid Function"; 8235 break; 8236 8237 case MPI_IOCSTATUS_BUSY: /* 0x0002 */ 8238 desc = "Busy"; 8239 break; 8240 8241 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */ 8242 desc = "Invalid SGL"; 8243 break; 8244 8245 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */ 8246 desc = "Internal Error"; 8247 break; 8248 8249 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */ 8250 desc = "Reserved"; 8251 break; 8252 8253 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */ 8254 desc = "Insufficient Resources"; 8255 break; 8256 8257 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */ 8258 desc = "Invalid Field"; 8259 break; 8260 8261 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */ 8262 desc = "Invalid State"; 8263 break; 8264 8265 /****************************************************************************/ 8266 /* Config IOCStatus values */ 8267 /****************************************************************************/ 8268 8269 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */ 8270 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */ 8271 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */ 8272 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */ 8273 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */ 8274 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */ 8275 mpt_iocstatus_info_config(ioc, status, mf); 8276 break; 8277 8278 /****************************************************************************/ 8279 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */ 8280 /* */ 8281 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */ 8282 /* */ 8283 /****************************************************************************/ 8284 8285 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ 8286 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ 8287 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */ 8288 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */ 8289 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */ 8290 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */ 8291 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */ 8292 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */ 8293 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */ 8294 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ 8295 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */ 8296 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */ 8297 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */ 8298 break; 8299 8300 /****************************************************************************/ 8301 /* SCSI Target values */ 8302 /****************************************************************************/ 8303 8304 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */ 8305 desc = "Target: Priority IO"; 8306 break; 8307 8308 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */ 8309 desc = "Target: Invalid Port"; 8310 break; 8311 8312 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */ 8313 desc = "Target Invalid IO Index:"; 8314 break; 8315 8316 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */ 8317 desc = "Target: Aborted"; 8318 break; 8319 8320 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */ 8321 desc = "Target: No Conn Retryable"; 8322 break; 8323 8324 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */ 8325 desc = "Target: No Connection"; 8326 break; 8327 8328 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */ 8329 desc = "Target: Transfer Count Mismatch"; 8330 break; 8331 8332 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */ 8333 desc = "Target: STS Data not Sent"; 8334 break; 8335 8336 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */ 8337 desc = "Target: Data Offset Error"; 8338 break; 8339 8340 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */ 8341 desc = "Target: Too Much Write Data"; 8342 break; 8343 8344 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */ 8345 desc = "Target: IU Too Short"; 8346 break; 8347 8348 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */ 8349 desc = "Target: ACK NAK Timeout"; 8350 break; 8351 8352 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */ 8353 desc = "Target: Nak Received"; 8354 break; 8355 8356 /****************************************************************************/ 8357 /* Fibre Channel Direct Access values */ 8358 /****************************************************************************/ 8359 8360 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */ 8361 desc = "FC: Aborted"; 8362 break; 8363 8364 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */ 8365 desc = "FC: RX ID Invalid"; 8366 break; 8367 8368 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */ 8369 desc = "FC: DID Invalid"; 8370 break; 8371 8372 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */ 8373 desc = "FC: Node Logged Out"; 8374 break; 8375 8376 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */ 8377 desc = "FC: Exchange Canceled"; 8378 break; 8379 8380 /****************************************************************************/ 8381 /* LAN values */ 8382 /****************************************************************************/ 8383 8384 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */ 8385 desc = "LAN: Device not Found"; 8386 break; 8387 8388 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */ 8389 desc = "LAN: Device Failure"; 8390 break; 8391 8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */ 8393 desc = "LAN: Transmit Error"; 8394 break; 8395 8396 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */ 8397 desc = "LAN: Transmit Aborted"; 8398 break; 8399 8400 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */ 8401 desc = "LAN: Receive Error"; 8402 break; 8403 8404 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */ 8405 desc = "LAN: Receive Aborted"; 8406 break; 8407 8408 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */ 8409 desc = "LAN: Partial Packet"; 8410 break; 8411 8412 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */ 8413 desc = "LAN: Canceled"; 8414 break; 8415 8416 /****************************************************************************/ 8417 /* Serial Attached SCSI values */ 8418 /****************************************************************************/ 8419 8420 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */ 8421 desc = "SAS: SMP Request Failed"; 8422 break; 8423 8424 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */ 8425 desc = "SAS: SMP Data Overrun"; 8426 break; 8427 8428 default: 8429 desc = "Others"; 8430 break; 8431 } 8432 8433 if (!desc) 8434 return; 8435 8436 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n", 8437 ioc->name, status, desc)); 8438 } 8439 8440 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8441 EXPORT_SYMBOL(mpt_attach); 8442 EXPORT_SYMBOL(mpt_detach); 8443 #ifdef CONFIG_PM 8444 EXPORT_SYMBOL(mpt_resume); 8445 EXPORT_SYMBOL(mpt_suspend); 8446 #endif 8447 EXPORT_SYMBOL(ioc_list); 8448 EXPORT_SYMBOL(mpt_register); 8449 EXPORT_SYMBOL(mpt_deregister); 8450 EXPORT_SYMBOL(mpt_event_register); 8451 EXPORT_SYMBOL(mpt_event_deregister); 8452 EXPORT_SYMBOL(mpt_reset_register); 8453 EXPORT_SYMBOL(mpt_reset_deregister); 8454 EXPORT_SYMBOL(mpt_device_driver_register); 8455 EXPORT_SYMBOL(mpt_device_driver_deregister); 8456 EXPORT_SYMBOL(mpt_get_msg_frame); 8457 EXPORT_SYMBOL(mpt_put_msg_frame); 8458 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri); 8459 EXPORT_SYMBOL(mpt_free_msg_frame); 8460 EXPORT_SYMBOL(mpt_send_handshake_request); 8461 EXPORT_SYMBOL(mpt_verify_adapter); 8462 EXPORT_SYMBOL(mpt_GetIocState); 8463 EXPORT_SYMBOL(mpt_print_ioc_summary); 8464 EXPORT_SYMBOL(mpt_HardResetHandler); 8465 EXPORT_SYMBOL(mpt_config); 8466 EXPORT_SYMBOL(mpt_findImVolumes); 8467 EXPORT_SYMBOL(mpt_alloc_fw_memory); 8468 EXPORT_SYMBOL(mpt_free_fw_memory); 8469 EXPORT_SYMBOL(mptbase_sas_persist_operation); 8470 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0); 8471 8472 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8473 /** 8474 * fusion_init - Fusion MPT base driver initialization routine. 8475 * 8476 * Returns 0 for success, non-zero for failure. 8477 */ 8478 static int __init 8479 fusion_init(void) 8480 { 8481 u8 cb_idx; 8482 8483 show_mptmod_ver(my_NAME, my_VERSION); 8484 printk(KERN_INFO COPYRIGHT "\n"); 8485 8486 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) { 8487 MptCallbacks[cb_idx] = NULL; 8488 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER; 8489 MptEvHandlers[cb_idx] = NULL; 8490 MptResetHandlers[cb_idx] = NULL; 8491 } 8492 8493 /* Register ourselves (mptbase) in order to facilitate 8494 * EventNotification handling. 8495 */ 8496 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER, 8497 "mptbase_reply"); 8498 8499 /* Register for hard reset handling callbacks. 8500 */ 8501 mpt_reset_register(mpt_base_index, mpt_ioc_reset); 8502 8503 #ifdef CONFIG_PROC_FS 8504 (void) procmpt_create(); 8505 #endif 8506 return 0; 8507 } 8508 8509 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ 8510 /** 8511 * fusion_exit - Perform driver unload cleanup. 8512 * 8513 * This routine frees all resources associated with each MPT adapter 8514 * and removes all %MPT_PROCFS_MPTBASEDIR entries. 8515 */ 8516 static void __exit 8517 fusion_exit(void) 8518 { 8519 8520 mpt_reset_deregister(mpt_base_index); 8521 8522 #ifdef CONFIG_PROC_FS 8523 procmpt_destroy(); 8524 #endif 8525 } 8526 8527 module_init(fusion_init); 8528 module_exit(fusion_exit); 8529