1 /*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13 /*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46 */
47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49 #include <linux/kernel.h>
50 #include <linux/module.h>
51 #include <linux/errno.h>
52 #include <linux/init.h>
53 #include <linux/seq_file.h>
54 #include <linux/slab.h>
55 #include <linux/types.h>
56 #include <linux/pci.h>
57 #include <linux/kdev_t.h>
58 #include <linux/blkdev.h>
59 #include <linux/delay.h>
60 #include <linux/interrupt.h>
61 #include <linux/dma-mapping.h>
62 #include <linux/kthread.h>
63 #include <scsi/scsi_host.h>
64
65 #include "mptbase.h"
66 #include "lsi/mpi_log_fc.h"
67
68 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69 #define my_NAME "Fusion MPT base driver"
70 #define my_VERSION MPT_LINUX_VERSION_COMMON
71 #define MYNAM "mptbase"
72
73 MODULE_AUTHOR(MODULEAUTHOR);
74 MODULE_DESCRIPTION(my_NAME);
75 MODULE_LICENSE("GPL");
76 MODULE_VERSION(my_VERSION);
77
78 /*
79 * cmd line parameters
80 */
81
82 static int mpt_msi_enable_spi;
83 module_param(mpt_msi_enable_spi, int, 0);
84 MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87 static int mpt_msi_enable_fc;
88 module_param(mpt_msi_enable_fc, int, 0);
89 MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92 static int mpt_msi_enable_sas;
93 module_param(mpt_msi_enable_sas, int, 0);
94 MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97 static int mpt_channel_mapping;
98 module_param(mpt_channel_mapping, int, 0);
99 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101 static int mpt_debug_level;
102 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105 MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108 int mpt_fwfault_debug;
109 EXPORT_SYMBOL(mpt_fwfault_debug);
110 module_param(mpt_fwfault_debug, int, 0600);
111 MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117 #ifdef MFCNT
118 static int mfcounter = 0;
119 #define PRINT_MF_COUNT 20000
120 #endif
121
122 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123 /*
124 * Public data...
125 */
126
127 #define WHOINIT_UNKNOWN 0xAA
128
129 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130 /*
131 * Private data...
132 */
133 /* Adapter link list */
134 LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145 #ifdef CONFIG_PROC_FS
146 static struct proc_dir_entry *mpt_proc_root_dir;
147 #endif
148
149 /*
150 * Driver Callback Index's
151 */
152 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153 static u8 last_drv_idx;
154
155 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156 /*
157 * Forward protos...
158 */
159 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167 static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168 static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181 static int PrimeIocFifos(MPT_ADAPTER *ioc);
182 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185 static int GetLanConfigPages(MPT_ADAPTER *ioc);
186 static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199 #ifdef CONFIG_PROC_FS
200 static int mpt_summary_proc_show(struct seq_file *m, void *v);
201 static int mpt_version_proc_show(struct seq_file *m, void *v);
202 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203 #endif
204 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206 static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215 /* module entry point */
216 static int __init fusion_init (void);
217 static void __exit fusion_exit (void);
218
219 #define CHIPREG_READ32(addr) readl_relaxed(addr)
220 #define CHIPREG_READ32_dmasync(addr) readl(addr)
221 #define CHIPREG_WRITE32(addr,val) writel(val, addr)
222 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225 static void
pci_disable_io_access(struct pci_dev * pdev)226 pci_disable_io_access(struct pci_dev *pdev)
227 {
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233 }
234
235 static void
pci_enable_io_access(struct pci_dev * pdev)236 pci_enable_io_access(struct pci_dev *pdev)
237 {
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243 }
244
mpt_set_debug_level(const char * val,const struct kernel_param * kp)245 static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246 {
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256 }
257
258 /**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264 static u8
mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)265 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266 {
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273 }
274
275 /**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281 static int
mpt_is_discovery_complete(MPT_ADAPTER * ioc)282 mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283 {
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4,
304 &dma_handle, GFP_KERNEL);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer,
320 dma_handle);
321 out:
322 return rc;
323 }
324
325
326 /**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
mpt_remove_dead_ioc_func(void * arg)333 static int mpt_remove_dead_ioc_func(void *arg)
334 {
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347 }
348
349
350
351 /**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355 **/
356 static void
mpt_fault_reset_work(struct work_struct * work)357 mpt_fault_reset_work(struct work_struct *work)
358 {
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436 }
437
438
439 /*
440 * Process turbo (context) reply...
441 */
442 static void
mpt_turbo_reply(MPT_ADAPTER * ioc,u32 pa)443 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444 {
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 }
477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
478 break;
479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
482 break;
483 default:
484 cb_idx = 0;
485 BUG();
486 }
487
488 /* Check for (valid) IO callback! */
489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
490 MptCallbacks[cb_idx] == NULL) {
491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
492 __func__, ioc->name, cb_idx);
493 goto out;
494 }
495
496 if (MptCallbacks[cb_idx](ioc, mf, mr))
497 mpt_free_msg_frame(ioc, mf);
498 out:
499 mb();
500 }
501
502 static void
mpt_reply(MPT_ADAPTER * ioc,u32 pa)503 mpt_reply(MPT_ADAPTER *ioc, u32 pa)
504 {
505 MPT_FRAME_HDR *mf;
506 MPT_FRAME_HDR *mr;
507 u16 req_idx;
508 u8 cb_idx;
509 int freeme;
510
511 u32 reply_dma_low;
512 u16 ioc_stat;
513
514 /* non-TURBO reply! Hmmm, something may be up...
515 * Newest turbo reply mechanism; get address
516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
517 */
518
519 /* Map DMA address of reply header to cpu address.
520 * pa is 32 bits - but the dma address may be 32 or 64 bits
521 * get offset based only only the low addresses
522 */
523
524 reply_dma_low = (pa <<= 1);
525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
526 (reply_dma_low - ioc->reply_frames_low_dma));
527
528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
531
532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
535
536 /* Check/log IOC log info
537 */
538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
541 if (ioc->bus_type == FC)
542 mpt_fc_log_info(ioc, log_info);
543 else if (ioc->bus_type == SPI)
544 mpt_spi_log_info(ioc, log_info);
545 else if (ioc->bus_type == SAS)
546 mpt_sas_log_info(ioc, log_info, cb_idx);
547 }
548
549 if (ioc_stat & MPI_IOCSTATUS_MASK)
550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
551
552 /* Check for (valid) IO callback! */
553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
554 MptCallbacks[cb_idx] == NULL) {
555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
556 __func__, ioc->name, cb_idx);
557 freeme = 0;
558 goto out;
559 }
560
561 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
562
563 out:
564 /* Flush (non-TURBO) reply with a WRITE! */
565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
566
567 if (freeme)
568 mpt_free_msg_frame(ioc, mf);
569 mb();
570 }
571
572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
573 /**
574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
575 * @irq: irq number (not used)
576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
577 *
578 * This routine is registered via the request_irq() kernel API call,
579 * and handles all interrupts generated from a specific MPT adapter
580 * (also referred to as a IO Controller or IOC).
581 * This routine must clear the interrupt from the adapter and does
582 * so by reading the reply FIFO. Multiple replies may be processed
583 * per single call to this routine.
584 *
585 * This routine handles register-level access of the adapter but
586 * dispatches (calls) a protocol-specific callback routine to handle
587 * the protocol-specific details of the MPT request completion.
588 */
589 static irqreturn_t
mpt_interrupt(int irq,void * bus_id)590 mpt_interrupt(int irq, void *bus_id)
591 {
592 MPT_ADAPTER *ioc = bus_id;
593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
594
595 if (pa == 0xFFFFFFFF)
596 return IRQ_NONE;
597
598 /*
599 * Drain the reply FIFO!
600 */
601 do {
602 if (pa & MPI_ADDRESS_REPLY_A_BIT)
603 mpt_reply(ioc, pa);
604 else
605 mpt_turbo_reply(ioc, pa);
606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
607 } while (pa != 0xFFFFFFFF);
608
609 return IRQ_HANDLED;
610 }
611
612 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
613 /**
614 * mptbase_reply - MPT base driver's callback routine
615 * @ioc: Pointer to MPT_ADAPTER structure
616 * @req: Pointer to original MPT request frame
617 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
618 *
619 * MPT base driver's callback routine; all base driver
620 * "internal" request/reply processing is routed here.
621 * Currently used for EventNotification and EventAck handling.
622 *
623 * Returns 1 indicating original alloc'd request frame ptr
624 * should be freed, or 0 if it shouldn't.
625 */
626 static int
mptbase_reply(MPT_ADAPTER * ioc,MPT_FRAME_HDR * req,MPT_FRAME_HDR * reply)627 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
628 {
629 EventNotificationReply_t *pEventReply;
630 u8 event;
631 int evHandlers;
632 int freereq = 1;
633
634 switch (reply->u.hdr.Function) {
635 case MPI_FUNCTION_EVENT_NOTIFICATION:
636 pEventReply = (EventNotificationReply_t *)reply;
637 evHandlers = 0;
638 ProcessEventNotification(ioc, pEventReply, &evHandlers);
639 event = le32_to_cpu(pEventReply->Event) & 0xFF;
640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
641 freereq = 0;
642 if (event != MPI_EVENT_EVENT_CHANGE)
643 break;
644 fallthrough;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676 }
677
678 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679 /**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699 u8
mpt_register(MPT_CALLBACK cbfunc,MPT_DRIVER_CLASS dclass,char * func_name)700 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701 {
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strscpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722 }
723
724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725 /**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732 void
mpt_deregister(u8 cb_idx)733 mpt_deregister(u8 cb_idx)
734 {
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742 }
743
744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745 /**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755 int
mpt_event_register(u8 cb_idx,MPT_EVHANDLER ev_cbfunc)756 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757 {
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763 }
764
765 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766 /**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774 void
mpt_event_deregister(u8 cb_idx)775 mpt_event_deregister(u8 cb_idx)
776 {
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781 }
782
783 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784 /**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794 int
mpt_reset_register(u8 cb_idx,MPT_RESETHANDLER reset_func)795 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796 {
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802 }
803
804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805 /**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813 void
mpt_reset_deregister(u8 cb_idx)814 mpt_reset_deregister(u8 cb_idx)
815 {
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820 }
821
822 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823 /**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828 int
mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc,u8 cb_idx)829 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830 {
831 MPT_ADAPTER *ioc;
832
833 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
834 return -EINVAL;
835
836 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
837
838 /* call per pci device probe entry point */
839 list_for_each_entry(ioc, &ioc_list, list) {
840 if (dd_cbfunc->probe)
841 dd_cbfunc->probe(ioc->pcidev);
842 }
843
844 return 0;
845 }
846
847 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
848 /**
849 * mpt_device_driver_deregister - DeRegister device driver hooks
850 * @cb_idx: MPT protocol driver index
851 */
852 void
mpt_device_driver_deregister(u8 cb_idx)853 mpt_device_driver_deregister(u8 cb_idx)
854 {
855 struct mpt_pci_driver *dd_cbfunc;
856 MPT_ADAPTER *ioc;
857
858 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
859 return;
860
861 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
862
863 list_for_each_entry(ioc, &ioc_list, list) {
864 if (dd_cbfunc->remove)
865 dd_cbfunc->remove(ioc->pcidev);
866 }
867
868 MptDeviceDriverHandlers[cb_idx] = NULL;
869 }
870
871
872 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
873 /**
874 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
875 * @cb_idx: Handle of registered MPT protocol driver
876 * @ioc: Pointer to MPT adapter structure
877 *
878 * Obtain an MPT request frame from the pool (of 1024) that are
879 * allocated per MPT adapter.
880 *
881 * Returns pointer to a MPT request frame or %NULL if none are available
882 * or IOC is not active.
883 */
884 MPT_FRAME_HDR*
mpt_get_msg_frame(u8 cb_idx,MPT_ADAPTER * ioc)885 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
886 {
887 MPT_FRAME_HDR *mf;
888 unsigned long flags;
889 u16 req_idx; /* Request index */
890
891 /* validate handle and ioc identifier */
892
893 #ifdef MFCNT
894 if (!ioc->active)
895 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
896 "returning NULL!\n", ioc->name);
897 #endif
898
899 /* If interrupts are not attached, do not return a request frame */
900 if (!ioc->active)
901 return NULL;
902
903 spin_lock_irqsave(&ioc->FreeQlock, flags);
904 if (!list_empty(&ioc->FreeQ)) {
905 int req_offset;
906
907 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
908 u.frame.linkage.list);
909 list_del(&mf->u.frame.linkage.list);
910 mf->u.frame.linkage.arg1 = 0;
911 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
912 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
913 /* u16! */
914 req_idx = req_offset / ioc->req_sz;
915 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
916 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
917 /* Default, will be changed if necessary in SG generation */
918 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
919 #ifdef MFCNT
920 ioc->mfcnt++;
921 #endif
922 }
923 else
924 mf = NULL;
925 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
926
927 #ifdef MFCNT
928 if (mf == NULL)
929 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
930 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
931 ioc->req_depth);
932 mfcounter++;
933 if (mfcounter == PRINT_MF_COUNT)
934 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
935 ioc->mfcnt, ioc->req_depth);
936 #endif
937
938 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
939 ioc->name, cb_idx, ioc->id, mf));
940 return mf;
941 }
942
943 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
944 /**
945 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
946 * @cb_idx: Handle of registered MPT protocol driver
947 * @ioc: Pointer to MPT adapter structure
948 * @mf: Pointer to MPT request frame
949 *
950 * This routine posts an MPT request frame to the request post FIFO of a
951 * specific MPT adapter.
952 */
953 void
mpt_put_msg_frame(u8 cb_idx,MPT_ADAPTER * ioc,MPT_FRAME_HDR * mf)954 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
955 {
956 u32 mf_dma_addr;
957 int req_offset;
958 u16 req_idx; /* Request index */
959
960 /* ensure values are reset properly! */
961 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
962 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
963 /* u16! */
964 req_idx = req_offset / ioc->req_sz;
965 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
966 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
967
968 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
969
970 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
971 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
972 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
973 ioc->RequestNB[req_idx]));
974 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
975 }
976
977 /**
978 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
979 * @cb_idx: Handle of registered MPT protocol driver
980 * @ioc: Pointer to MPT adapter structure
981 * @mf: Pointer to MPT request frame
982 *
983 * Send a protocol-specific MPT request frame to an IOC using
984 * hi-priority request queue.
985 *
986 * This routine posts an MPT request frame to the request post FIFO of a
987 * specific MPT adapter.
988 **/
989 void
mpt_put_msg_frame_hi_pri(u8 cb_idx,MPT_ADAPTER * ioc,MPT_FRAME_HDR * mf)990 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
991 {
992 u32 mf_dma_addr;
993 int req_offset;
994 u16 req_idx; /* Request index */
995
996 /* ensure values are reset properly! */
997 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
998 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
999 req_idx = req_offset / ioc->req_sz;
1000 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1001 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1002
1003 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1004
1005 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1006 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1007 ioc->name, mf_dma_addr, req_idx));
1008 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1009 }
1010
1011 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1012 /**
1013 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1014 * @ioc: Pointer to MPT adapter structure
1015 * @mf: Pointer to MPT request frame
1016 *
1017 * This routine places a MPT request frame back on the MPT adapter's
1018 * FreeQ.
1019 */
1020 void
mpt_free_msg_frame(MPT_ADAPTER * ioc,MPT_FRAME_HDR * mf)1021 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1022 {
1023 unsigned long flags;
1024
1025 /* Put Request back on FreeQ! */
1026 spin_lock_irqsave(&ioc->FreeQlock, flags);
1027 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1028 goto out;
1029 /* signature to know if this mf is freed */
1030 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1031 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1032 #ifdef MFCNT
1033 ioc->mfcnt--;
1034 #endif
1035 out:
1036 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1037 }
1038
1039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1040 /**
1041 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1042 * @pAddr: virtual address for SGE
1043 * @flagslength: SGE flags and data transfer length
1044 * @dma_addr: Physical address
1045 *
1046 * This routine places a MPT request frame back on the MPT adapter's
1047 * FreeQ.
1048 */
1049 static void
mpt_add_sge(void * pAddr,u32 flagslength,dma_addr_t dma_addr)1050 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1051 {
1052 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1053 pSge->FlagsLength = cpu_to_le32(flagslength);
1054 pSge->Address = cpu_to_le32(dma_addr);
1055 }
1056
1057 /**
1058 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1059 * @pAddr: virtual address for SGE
1060 * @flagslength: SGE flags and data transfer length
1061 * @dma_addr: Physical address
1062 *
1063 * This routine places a MPT request frame back on the MPT adapter's
1064 * FreeQ.
1065 **/
1066 static void
mpt_add_sge_64bit(void * pAddr,u32 flagslength,dma_addr_t dma_addr)1067 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1068 {
1069 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1070 pSge->Address.Low = cpu_to_le32
1071 (lower_32_bits(dma_addr));
1072 pSge->Address.High = cpu_to_le32
1073 (upper_32_bits(dma_addr));
1074 pSge->FlagsLength = cpu_to_le32
1075 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1076 }
1077
1078 /**
1079 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1080 * @pAddr: virtual address for SGE
1081 * @flagslength: SGE flags and data transfer length
1082 * @dma_addr: Physical address
1083 *
1084 * This routine places a MPT request frame back on the MPT adapter's
1085 * FreeQ.
1086 **/
1087 static void
mpt_add_sge_64bit_1078(void * pAddr,u32 flagslength,dma_addr_t dma_addr)1088 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1089 {
1090 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1091 u32 tmp;
1092
1093 pSge->Address.Low = cpu_to_le32
1094 (lower_32_bits(dma_addr));
1095 tmp = (u32)(upper_32_bits(dma_addr));
1096
1097 /*
1098 * 1078 errata workaround for the 36GB limitation
1099 */
1100 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1101 flagslength |=
1102 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1103 tmp |= (1<<31);
1104 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1105 printk(KERN_DEBUG "1078 P0M2 addressing for "
1106 "addr = 0x%llx len = %d\n",
1107 (unsigned long long)dma_addr,
1108 MPI_SGE_LENGTH(flagslength));
1109 }
1110
1111 pSge->Address.High = cpu_to_le32(tmp);
1112 pSge->FlagsLength = cpu_to_le32(
1113 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1114 }
1115
1116 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1117 /**
1118 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1119 * @pAddr: virtual address for SGE
1120 * @next: nextChainOffset value (u32's)
1121 * @length: length of next SGL segment
1122 * @dma_addr: Physical address
1123 *
1124 */
1125 static void
mpt_add_chain(void * pAddr,u8 next,u16 length,dma_addr_t dma_addr)1126 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1127 {
1128 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1129
1130 pChain->Length = cpu_to_le16(length);
1131 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1132 pChain->NextChainOffset = next;
1133 pChain->Address = cpu_to_le32(dma_addr);
1134 }
1135
1136 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1137 /**
1138 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1139 * @pAddr: virtual address for SGE
1140 * @next: nextChainOffset value (u32's)
1141 * @length: length of next SGL segment
1142 * @dma_addr: Physical address
1143 *
1144 */
1145 static void
mpt_add_chain_64bit(void * pAddr,u8 next,u16 length,dma_addr_t dma_addr)1146 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1147 {
1148 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1149 u32 tmp = dma_addr & 0xFFFFFFFF;
1150
1151 pChain->Length = cpu_to_le16(length);
1152 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1153 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1154
1155 pChain->NextChainOffset = next;
1156
1157 pChain->Address.Low = cpu_to_le32(tmp);
1158 tmp = (u32)(upper_32_bits(dma_addr));
1159 pChain->Address.High = cpu_to_le32(tmp);
1160 }
1161
1162 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1163 /**
1164 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1165 * @cb_idx: Handle of registered MPT protocol driver
1166 * @ioc: Pointer to MPT adapter structure
1167 * @reqBytes: Size of the request in bytes
1168 * @req: Pointer to MPT request frame
1169 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1170 *
1171 * This routine is used exclusively to send MptScsiTaskMgmt
1172 * requests since they are required to be sent via doorbell handshake.
1173 *
1174 * NOTE: It is the callers responsibility to byte-swap fields in the
1175 * request which are greater than 1 byte in size.
1176 *
1177 * Returns 0 for success, non-zero for failure.
1178 */
1179 int
mpt_send_handshake_request(u8 cb_idx,MPT_ADAPTER * ioc,int reqBytes,u32 * req,int sleepFlag)1180 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1181 {
1182 int r = 0;
1183 u8 *req_as_bytes;
1184 int ii;
1185
1186 /* State is known to be good upon entering
1187 * this function so issue the bus reset
1188 * request.
1189 */
1190
1191 /*
1192 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1193 * setting cb_idx/req_idx. But ONLY if this request
1194 * is in proper (pre-alloc'd) request buffer range...
1195 */
1196 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1197 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1198 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1199 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1200 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1201 }
1202
1203 /* Make sure there are no doorbells */
1204 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1205
1206 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1207 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1208 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1209
1210 /* Wait for IOC doorbell int */
1211 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1212 return ii;
1213 }
1214
1215 /* Read doorbell and check for active bit */
1216 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1217 return -5;
1218
1219 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1220 ioc->name, ii));
1221
1222 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1223
1224 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1225 return -2;
1226 }
1227
1228 /* Send request via doorbell handshake */
1229 req_as_bytes = (u8 *) req;
1230 for (ii = 0; ii < reqBytes/4; ii++) {
1231 u32 word;
1232
1233 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1234 (req_as_bytes[(ii*4) + 1] << 8) |
1235 (req_as_bytes[(ii*4) + 2] << 16) |
1236 (req_as_bytes[(ii*4) + 3] << 24));
1237 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1239 r = -3;
1240 break;
1241 }
1242 }
1243
1244 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1245 r = 0;
1246 else
1247 r = -4;
1248
1249 /* Make sure there are no doorbells */
1250 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1251
1252 return r;
1253 }
1254
1255 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1256 /**
1257 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1258 * @ioc: Pointer to MPT adapter structure
1259 * @access_control_value: define bits below
1260 * @sleepFlag: Specifies whether the process can sleep
1261 *
1262 * Provides mechanism for the host driver to control the IOC's
1263 * Host Page Buffer access.
1264 *
1265 * Access Control Value - bits[15:12]
1266 * 0h Reserved
1267 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1268 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1269 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1270 *
1271 * Returns 0 for success, non-zero for failure.
1272 */
1273
1274 static int
mpt_host_page_access_control(MPT_ADAPTER * ioc,u8 access_control_value,int sleepFlag)1275 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1276 {
1277 /* return if in use */
1278 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1279 & MPI_DOORBELL_ACTIVE)
1280 return -1;
1281
1282 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1283
1284 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1285 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1286 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1287 (access_control_value<<12)));
1288
1289 /* Wait for IOC to clear Doorbell Status bit */
1290 if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0)
1291 return -2;
1292 else
1293 return 0;
1294 }
1295
1296 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1297 /**
1298 * mpt_host_page_alloc - allocate system memory for the fw
1299 * @ioc: Pointer to pointer to IOC adapter
1300 * @ioc_init: Pointer to ioc init config page
1301 *
1302 * If we already allocated memory in past, then resend the same pointer.
1303 * Returns 0 for success, non-zero for failure.
1304 */
1305 static int
mpt_host_page_alloc(MPT_ADAPTER * ioc,pIOCInit_t ioc_init)1306 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1307 {
1308 char *psge;
1309 int flags_length;
1310 u32 host_page_buffer_sz=0;
1311
1312 if(!ioc->HostPageBuffer) {
1313
1314 host_page_buffer_sz =
1315 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1316
1317 if(!host_page_buffer_sz)
1318 return 0; /* fw doesn't need any host buffers */
1319
1320 /* spin till we get enough memory */
1321 while (host_page_buffer_sz > 0) {
1322 ioc->HostPageBuffer =
1323 dma_alloc_coherent(&ioc->pcidev->dev,
1324 host_page_buffer_sz,
1325 &ioc->HostPageBuffer_dma,
1326 GFP_KERNEL);
1327 if (ioc->HostPageBuffer) {
1328 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1329 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1330 ioc->name, ioc->HostPageBuffer,
1331 (u32)ioc->HostPageBuffer_dma,
1332 host_page_buffer_sz));
1333 ioc->alloc_total += host_page_buffer_sz;
1334 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1335 break;
1336 }
1337
1338 host_page_buffer_sz -= (4*1024);
1339 }
1340 }
1341
1342 if(!ioc->HostPageBuffer) {
1343 printk(MYIOC_s_ERR_FMT
1344 "Failed to alloc memory for host_page_buffer!\n",
1345 ioc->name);
1346 return -999;
1347 }
1348
1349 psge = (char *)&ioc_init->HostPageBufferSGE;
1350 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1351 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1352 MPI_SGE_FLAGS_HOST_TO_IOC |
1353 MPI_SGE_FLAGS_END_OF_BUFFER;
1354 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1355 flags_length |= ioc->HostPageBuffer_sz;
1356 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1357 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1358
1359 return 0;
1360 }
1361
1362 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1363 /**
1364 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1365 * @iocid: IOC unique identifier (integer)
1366 * @iocpp: Pointer to pointer to IOC adapter
1367 *
1368 * Given a unique IOC identifier, set pointer to the associated MPT
1369 * adapter structure.
1370 *
1371 * Returns iocid and sets iocpp if iocid is found.
1372 * Returns -1 if iocid is not found.
1373 */
1374 int
mpt_verify_adapter(int iocid,MPT_ADAPTER ** iocpp)1375 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1376 {
1377 MPT_ADAPTER *ioc;
1378
1379 list_for_each_entry(ioc,&ioc_list,list) {
1380 if (ioc->id == iocid) {
1381 *iocpp =ioc;
1382 return iocid;
1383 }
1384 }
1385
1386 *iocpp = NULL;
1387 return -1;
1388 }
1389
1390 /**
1391 * mpt_get_product_name - returns product string
1392 * @vendor: pci vendor id
1393 * @device: pci device id
1394 * @revision: pci revision id
1395 *
1396 * Returns product string displayed when driver loads,
1397 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1398 *
1399 **/
1400 static const char*
mpt_get_product_name(u16 vendor,u16 device,u8 revision)1401 mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1402 {
1403 char *product_str = NULL;
1404
1405 if (vendor == PCI_VENDOR_ID_BROCADE) {
1406 switch (device)
1407 {
1408 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1409 switch (revision)
1410 {
1411 case 0x00:
1412 product_str = "BRE040 A0";
1413 break;
1414 case 0x01:
1415 product_str = "BRE040 A1";
1416 break;
1417 default:
1418 product_str = "BRE040";
1419 break;
1420 }
1421 break;
1422 }
1423 goto out;
1424 }
1425
1426 switch (device)
1427 {
1428 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1429 product_str = "LSIFC909 B1";
1430 break;
1431 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1432 product_str = "LSIFC919 B0";
1433 break;
1434 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1435 product_str = "LSIFC929 B0";
1436 break;
1437 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1438 if (revision < 0x80)
1439 product_str = "LSIFC919X A0";
1440 else
1441 product_str = "LSIFC919XL A1";
1442 break;
1443 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1444 if (revision < 0x80)
1445 product_str = "LSIFC929X A0";
1446 else
1447 product_str = "LSIFC929XL A1";
1448 break;
1449 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1450 product_str = "LSIFC939X A1";
1451 break;
1452 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1453 product_str = "LSIFC949X A1";
1454 break;
1455 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1456 switch (revision)
1457 {
1458 case 0x00:
1459 product_str = "LSIFC949E A0";
1460 break;
1461 case 0x01:
1462 product_str = "LSIFC949E A1";
1463 break;
1464 default:
1465 product_str = "LSIFC949E";
1466 break;
1467 }
1468 break;
1469 case MPI_MANUFACTPAGE_DEVID_53C1030:
1470 switch (revision)
1471 {
1472 case 0x00:
1473 product_str = "LSI53C1030 A0";
1474 break;
1475 case 0x01:
1476 product_str = "LSI53C1030 B0";
1477 break;
1478 case 0x03:
1479 product_str = "LSI53C1030 B1";
1480 break;
1481 case 0x07:
1482 product_str = "LSI53C1030 B2";
1483 break;
1484 case 0x08:
1485 product_str = "LSI53C1030 C0";
1486 break;
1487 case 0x80:
1488 product_str = "LSI53C1030T A0";
1489 break;
1490 case 0x83:
1491 product_str = "LSI53C1030T A2";
1492 break;
1493 case 0x87:
1494 product_str = "LSI53C1030T A3";
1495 break;
1496 case 0xc1:
1497 product_str = "LSI53C1020A A1";
1498 break;
1499 default:
1500 product_str = "LSI53C1030";
1501 break;
1502 }
1503 break;
1504 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1505 switch (revision)
1506 {
1507 case 0x03:
1508 product_str = "LSI53C1035 A2";
1509 break;
1510 case 0x04:
1511 product_str = "LSI53C1035 B0";
1512 break;
1513 default:
1514 product_str = "LSI53C1035";
1515 break;
1516 }
1517 break;
1518 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1519 switch (revision)
1520 {
1521 case 0x00:
1522 product_str = "LSISAS1064 A1";
1523 break;
1524 case 0x01:
1525 product_str = "LSISAS1064 A2";
1526 break;
1527 case 0x02:
1528 product_str = "LSISAS1064 A3";
1529 break;
1530 case 0x03:
1531 product_str = "LSISAS1064 A4";
1532 break;
1533 default:
1534 product_str = "LSISAS1064";
1535 break;
1536 }
1537 break;
1538 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1539 switch (revision)
1540 {
1541 case 0x00:
1542 product_str = "LSISAS1064E A0";
1543 break;
1544 case 0x01:
1545 product_str = "LSISAS1064E B0";
1546 break;
1547 case 0x02:
1548 product_str = "LSISAS1064E B1";
1549 break;
1550 case 0x04:
1551 product_str = "LSISAS1064E B2";
1552 break;
1553 case 0x08:
1554 product_str = "LSISAS1064E B3";
1555 break;
1556 default:
1557 product_str = "LSISAS1064E";
1558 break;
1559 }
1560 break;
1561 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1562 switch (revision)
1563 {
1564 case 0x00:
1565 product_str = "LSISAS1068 A0";
1566 break;
1567 case 0x01:
1568 product_str = "LSISAS1068 B0";
1569 break;
1570 case 0x02:
1571 product_str = "LSISAS1068 B1";
1572 break;
1573 default:
1574 product_str = "LSISAS1068";
1575 break;
1576 }
1577 break;
1578 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1579 switch (revision)
1580 {
1581 case 0x00:
1582 product_str = "LSISAS1068E A0";
1583 break;
1584 case 0x01:
1585 product_str = "LSISAS1068E B0";
1586 break;
1587 case 0x02:
1588 product_str = "LSISAS1068E B1";
1589 break;
1590 case 0x04:
1591 product_str = "LSISAS1068E B2";
1592 break;
1593 case 0x08:
1594 product_str = "LSISAS1068E B3";
1595 break;
1596 default:
1597 product_str = "LSISAS1068E";
1598 break;
1599 }
1600 break;
1601 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1602 switch (revision)
1603 {
1604 case 0x00:
1605 product_str = "LSISAS1078 A0";
1606 break;
1607 case 0x01:
1608 product_str = "LSISAS1078 B0";
1609 break;
1610 case 0x02:
1611 product_str = "LSISAS1078 C0";
1612 break;
1613 case 0x03:
1614 product_str = "LSISAS1078 C1";
1615 break;
1616 case 0x04:
1617 product_str = "LSISAS1078 C2";
1618 break;
1619 default:
1620 product_str = "LSISAS1078";
1621 break;
1622 }
1623 break;
1624 }
1625
1626 out:
1627 return product_str;
1628 }
1629
1630 /**
1631 * mpt_mapresources - map in memory mapped io
1632 * @ioc: Pointer to pointer to IOC adapter
1633 *
1634 **/
1635 static int
mpt_mapresources(MPT_ADAPTER * ioc)1636 mpt_mapresources(MPT_ADAPTER *ioc)
1637 {
1638 u8 __iomem *mem;
1639 int ii;
1640 resource_size_t mem_phys;
1641 unsigned long port;
1642 u32 msize;
1643 u32 psize;
1644 int r = -ENODEV;
1645 struct pci_dev *pdev;
1646
1647 pdev = ioc->pcidev;
1648 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1649 if (pci_enable_device_mem(pdev)) {
1650 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1651 "failed\n", ioc->name);
1652 return r;
1653 }
1654 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1655 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1656 "MEM failed\n", ioc->name);
1657 goto out_pci_disable_device;
1658 }
1659
1660 if (sizeof(dma_addr_t) > 4) {
1661 const uint64_t required_mask = dma_get_required_mask
1662 (&pdev->dev);
1663 if (required_mask > DMA_BIT_MASK(32)
1664 && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))
1665 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1666 ioc->dma_mask = DMA_BIT_MASK(64);
1667 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1668 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1669 ioc->name));
1670 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))
1671 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1672 ioc->dma_mask = DMA_BIT_MASK(32);
1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1674 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1675 ioc->name));
1676 } else {
1677 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1678 ioc->name, pci_name(pdev));
1679 goto out_pci_release_region;
1680 }
1681 } else {
1682 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))
1683 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1684 ioc->dma_mask = DMA_BIT_MASK(32);
1685 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1686 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1687 ioc->name));
1688 } else {
1689 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1690 ioc->name, pci_name(pdev));
1691 goto out_pci_release_region;
1692 }
1693 }
1694
1695 mem_phys = msize = 0;
1696 port = psize = 0;
1697 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1698 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1699 if (psize)
1700 continue;
1701 /* Get I/O space! */
1702 port = pci_resource_start(pdev, ii);
1703 psize = pci_resource_len(pdev, ii);
1704 } else {
1705 if (msize)
1706 continue;
1707 /* Get memmap */
1708 mem_phys = pci_resource_start(pdev, ii);
1709 msize = pci_resource_len(pdev, ii);
1710 }
1711 }
1712 ioc->mem_size = msize;
1713
1714 mem = NULL;
1715 /* Get logical ptr for PciMem0 space */
1716 /*mem = ioremap(mem_phys, msize);*/
1717 mem = ioremap(mem_phys, msize);
1718 if (mem == NULL) {
1719 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1720 " memory!\n", ioc->name);
1721 r = -EINVAL;
1722 goto out_pci_release_region;
1723 }
1724 ioc->memmap = mem;
1725 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1726 ioc->name, mem, (unsigned long long)mem_phys));
1727
1728 ioc->mem_phys = mem_phys;
1729 ioc->chip = (SYSIF_REGS __iomem *)mem;
1730
1731 /* Save Port IO values in case we need to do downloadboot */
1732 ioc->pio_mem_phys = port;
1733 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1734
1735 return 0;
1736
1737 out_pci_release_region:
1738 pci_release_selected_regions(pdev, ioc->bars);
1739 out_pci_disable_device:
1740 pci_disable_device(pdev);
1741 return r;
1742 }
1743
1744 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1745 /**
1746 * mpt_attach - Install a PCI intelligent MPT adapter.
1747 * @pdev: Pointer to pci_dev structure
1748 * @id: PCI device ID information
1749 *
1750 * This routine performs all the steps necessary to bring the IOC of
1751 * a MPT adapter to a OPERATIONAL state. This includes registering
1752 * memory regions, registering the interrupt, and allocating request
1753 * and reply memory pools.
1754 *
1755 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1756 * MPT adapter.
1757 *
1758 * Returns 0 for success, non-zero for failure.
1759 *
1760 * TODO: Add support for polled controllers
1761 */
1762 int
mpt_attach(struct pci_dev * pdev,const struct pci_device_id * id)1763 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1764 {
1765 MPT_ADAPTER *ioc;
1766 u8 cb_idx;
1767 int r = -ENODEV;
1768 u8 pcixcmd;
1769 static int mpt_ids = 0;
1770 #ifdef CONFIG_PROC_FS
1771 struct proc_dir_entry *dent;
1772 #endif
1773
1774 ioc = kzalloc_obj(MPT_ADAPTER);
1775 if (ioc == NULL) {
1776 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1777 return -ENOMEM;
1778 }
1779
1780 ioc->id = mpt_ids++;
1781 sprintf(ioc->name, "ioc%d", ioc->id);
1782 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1783
1784 /*
1785 * set initial debug level
1786 * (refer to mptdebug.h)
1787 *
1788 */
1789 ioc->debug_level = mpt_debug_level;
1790 if (mpt_debug_level)
1791 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1792
1793 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1794
1795 ioc->pcidev = pdev;
1796 if (mpt_mapresources(ioc)) {
1797 goto out_free_ioc;
1798 }
1799
1800 /*
1801 * Setting up proper handlers for scatter gather handling
1802 */
1803 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1804 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1805 ioc->add_sge = &mpt_add_sge_64bit_1078;
1806 else
1807 ioc->add_sge = &mpt_add_sge_64bit;
1808 ioc->add_chain = &mpt_add_chain_64bit;
1809 ioc->sg_addr_size = 8;
1810 } else {
1811 ioc->add_sge = &mpt_add_sge;
1812 ioc->add_chain = &mpt_add_chain;
1813 ioc->sg_addr_size = 4;
1814 }
1815 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1816
1817 ioc->alloc_total = sizeof(MPT_ADAPTER);
1818 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1819 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1820
1821
1822 spin_lock_init(&ioc->taskmgmt_lock);
1823 mutex_init(&ioc->internal_cmds.mutex);
1824 init_completion(&ioc->internal_cmds.done);
1825 mutex_init(&ioc->mptbase_cmds.mutex);
1826 init_completion(&ioc->mptbase_cmds.done);
1827 mutex_init(&ioc->taskmgmt_cmds.mutex);
1828 init_completion(&ioc->taskmgmt_cmds.done);
1829
1830 /* Initialize the event logging.
1831 */
1832 ioc->eventTypes = 0; /* None */
1833 ioc->eventContext = 0;
1834 ioc->eventLogSize = 0;
1835 ioc->events = NULL;
1836
1837 #ifdef MFCNT
1838 ioc->mfcnt = 0;
1839 #endif
1840
1841 ioc->sh = NULL;
1842 ioc->cached_fw = NULL;
1843
1844 /* Initialize SCSI Config Data structure
1845 */
1846 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1847
1848 /* Initialize the fc rport list head.
1849 */
1850 INIT_LIST_HEAD(&ioc->fc_rports);
1851
1852 /* Find lookup slot. */
1853 INIT_LIST_HEAD(&ioc->list);
1854
1855
1856 /* Initialize workqueue */
1857 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1858
1859 ioc->reset_work_q =
1860 alloc_workqueue("mpt_poll_%d", WQ_MEM_RECLAIM | WQ_PERCPU, 0,
1861 ioc->id);
1862 if (!ioc->reset_work_q) {
1863 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1864 ioc->name);
1865 r = -ENOMEM;
1866 goto out_unmap_resources;
1867 }
1868
1869 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1870 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1871
1872 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1873 pdev->revision);
1874
1875 switch (pdev->device)
1876 {
1877 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1878 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1879 ioc->errata_flag_1064 = 1;
1880 fallthrough;
1881 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1882 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1883 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1884 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1885 ioc->bus_type = FC;
1886 break;
1887
1888 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1889 if (pdev->revision < XL_929) {
1890 /* 929X Chip Fix. Set Split transactions level
1891 * for PCIX. Set MOST bits to zero.
1892 */
1893 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1894 pcixcmd &= 0x8F;
1895 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1896 } else {
1897 /* 929XL Chip Fix. Set MMRBC to 0x08.
1898 */
1899 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1900 pcixcmd |= 0x08;
1901 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1902 }
1903 ioc->bus_type = FC;
1904 break;
1905
1906 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1907 /* 919X Chip Fix. Set Split transactions level
1908 * for PCIX. Set MOST bits to zero.
1909 */
1910 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1911 pcixcmd &= 0x8F;
1912 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1913 ioc->bus_type = FC;
1914 break;
1915
1916 case MPI_MANUFACTPAGE_DEVID_53C1030:
1917 /* 1030 Chip Fix. Disable Split transactions
1918 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1919 */
1920 if (pdev->revision < C0_1030) {
1921 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1922 pcixcmd &= 0x8F;
1923 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1924 }
1925 fallthrough;
1926
1927 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1928 ioc->bus_type = SPI;
1929 break;
1930
1931 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1932 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1933 ioc->errata_flag_1064 = 1;
1934 ioc->bus_type = SAS;
1935 break;
1936
1937 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1938 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1939 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1940 ioc->bus_type = SAS;
1941 break;
1942 }
1943
1944
1945 switch (ioc->bus_type) {
1946
1947 case SAS:
1948 ioc->msi_enable = mpt_msi_enable_sas;
1949 break;
1950
1951 case SPI:
1952 ioc->msi_enable = mpt_msi_enable_spi;
1953 break;
1954
1955 case FC:
1956 ioc->msi_enable = mpt_msi_enable_fc;
1957 break;
1958
1959 default:
1960 ioc->msi_enable = 0;
1961 break;
1962 }
1963
1964 ioc->fw_events_off = 1;
1965
1966 if (ioc->errata_flag_1064)
1967 pci_disable_io_access(pdev);
1968
1969 spin_lock_init(&ioc->FreeQlock);
1970
1971 /* Disable all! */
1972 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1973 ioc->active = 0;
1974 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1975
1976 /* Set IOC ptr in the pcidev's driver data. */
1977 pci_set_drvdata(ioc->pcidev, ioc);
1978
1979 /* Set lookup ptr. */
1980 list_add_tail(&ioc->list, &ioc_list);
1981
1982 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1983 */
1984 mpt_detect_bound_ports(ioc, pdev);
1985
1986 INIT_LIST_HEAD(&ioc->fw_event_list);
1987 spin_lock_init(&ioc->fw_event_lock);
1988 ioc->fw_event_q = alloc_workqueue("mpt/%d",
1989 WQ_MEM_RECLAIM | WQ_PERCPU, 0,
1990 ioc->id);
1991 if (!ioc->fw_event_q) {
1992 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1993 ioc->name);
1994 r = -ENOMEM;
1995 goto out_remove_ioc;
1996 }
1997
1998 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
1999 CAN_SLEEP)) != 0){
2000 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2001 ioc->name, r);
2002
2003 destroy_workqueue(ioc->fw_event_q);
2004 ioc->fw_event_q = NULL;
2005
2006 list_del(&ioc->list);
2007 if (ioc->alt_ioc)
2008 ioc->alt_ioc->alt_ioc = NULL;
2009 iounmap(ioc->memmap);
2010 if (pci_is_enabled(pdev))
2011 pci_disable_device(pdev);
2012 if (r != -5)
2013 pci_release_selected_regions(pdev, ioc->bars);
2014
2015 destroy_workqueue(ioc->reset_work_q);
2016 ioc->reset_work_q = NULL;
2017
2018 kfree(ioc);
2019 return r;
2020 }
2021
2022 /* call per device driver probe entry point */
2023 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2024 if(MptDeviceDriverHandlers[cb_idx] &&
2025 MptDeviceDriverHandlers[cb_idx]->probe) {
2026 MptDeviceDriverHandlers[cb_idx]->probe(pdev);
2027 }
2028 }
2029
2030 #ifdef CONFIG_PROC_FS
2031 /*
2032 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2033 */
2034 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2035 if (dent) {
2036 proc_create_single_data("info", S_IRUGO, dent,
2037 mpt_iocinfo_proc_show, ioc);
2038 proc_create_single_data("summary", S_IRUGO, dent,
2039 mpt_summary_proc_show, ioc);
2040 }
2041 #endif
2042
2043 if (!ioc->alt_ioc)
2044 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2045 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2046
2047 return 0;
2048
2049 out_remove_ioc:
2050 list_del(&ioc->list);
2051 if (ioc->alt_ioc)
2052 ioc->alt_ioc->alt_ioc = NULL;
2053
2054 destroy_workqueue(ioc->reset_work_q);
2055 ioc->reset_work_q = NULL;
2056
2057 out_unmap_resources:
2058 iounmap(ioc->memmap);
2059 pci_disable_device(pdev);
2060 pci_release_selected_regions(pdev, ioc->bars);
2061
2062 out_free_ioc:
2063 kfree(ioc);
2064
2065 return r;
2066 }
2067
2068 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2069 /**
2070 * mpt_detach - Remove a PCI intelligent MPT adapter.
2071 * @pdev: Pointer to pci_dev structure
2072 */
2073
2074 void
mpt_detach(struct pci_dev * pdev)2075 mpt_detach(struct pci_dev *pdev)
2076 {
2077 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2078 char pname[64];
2079 u8 cb_idx;
2080 unsigned long flags;
2081 struct workqueue_struct *wq;
2082
2083 /*
2084 * Stop polling ioc for fault condition
2085 */
2086 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2087 wq = ioc->reset_work_q;
2088 ioc->reset_work_q = NULL;
2089 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2090 cancel_delayed_work(&ioc->fault_reset_work);
2091 destroy_workqueue(wq);
2092
2093 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2094 wq = ioc->fw_event_q;
2095 ioc->fw_event_q = NULL;
2096 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2097 destroy_workqueue(wq);
2098
2099 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2100 remove_proc_entry(pname, NULL);
2101 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2102 remove_proc_entry(pname, NULL);
2103 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2104 remove_proc_entry(pname, NULL);
2105
2106 /* call per device driver remove entry point */
2107 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2108 if(MptDeviceDriverHandlers[cb_idx] &&
2109 MptDeviceDriverHandlers[cb_idx]->remove) {
2110 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2111 }
2112 }
2113
2114 /* Disable interrupts! */
2115 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2116
2117 ioc->active = 0;
2118 synchronize_irq(pdev->irq);
2119
2120 /* Clear any lingering interrupt */
2121 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2122
2123 CHIPREG_READ32(&ioc->chip->IntStatus);
2124
2125 mpt_adapter_dispose(ioc);
2126
2127 }
2128
2129 /**************************************************************************
2130 * Power Management
2131 */
2132 #ifdef CONFIG_PM
2133 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2134 /**
2135 * mpt_suspend - Fusion MPT base driver suspend routine.
2136 * @pdev: Pointer to pci_dev structure
2137 * @state: new state to enter
2138 */
2139 int
mpt_suspend(struct pci_dev * pdev,pm_message_t state)2140 mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2141 {
2142 u32 device_state;
2143 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2144
2145 device_state = pci_choose_state(pdev, state);
2146 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2147 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2148 device_state);
2149
2150 /* put ioc into READY_STATE */
2151 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2152 printk(MYIOC_s_ERR_FMT
2153 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2154 }
2155
2156 /* disable interrupts */
2157 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2158 ioc->active = 0;
2159
2160 /* Clear any lingering interrupt */
2161 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2162
2163 free_irq(ioc->pci_irq, ioc);
2164 if (ioc->msi_enable)
2165 pci_disable_msi(ioc->pcidev);
2166 ioc->pci_irq = -1;
2167 pci_save_state(pdev);
2168 pci_disable_device(pdev);
2169 pci_release_selected_regions(pdev, ioc->bars);
2170 pci_set_power_state(pdev, device_state);
2171 return 0;
2172 }
2173
2174 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2175 /**
2176 * mpt_resume - Fusion MPT base driver resume routine.
2177 * @pdev: Pointer to pci_dev structure
2178 */
2179 int
mpt_resume(struct pci_dev * pdev)2180 mpt_resume(struct pci_dev *pdev)
2181 {
2182 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2183 u32 device_state = pdev->current_state;
2184 int recovery_state;
2185 int err;
2186
2187 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2188 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2189 device_state);
2190
2191 pci_set_power_state(pdev, PCI_D0);
2192 pci_enable_wake(pdev, PCI_D0, 0);
2193 pci_restore_state(pdev);
2194 ioc->pcidev = pdev;
2195 err = mpt_mapresources(ioc);
2196 if (err)
2197 return err;
2198
2199 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2200 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2201 ioc->add_sge = &mpt_add_sge_64bit_1078;
2202 else
2203 ioc->add_sge = &mpt_add_sge_64bit;
2204 ioc->add_chain = &mpt_add_chain_64bit;
2205 ioc->sg_addr_size = 8;
2206 } else {
2207
2208 ioc->add_sge = &mpt_add_sge;
2209 ioc->add_chain = &mpt_add_chain;
2210 ioc->sg_addr_size = 4;
2211 }
2212 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2213
2214 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2215 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2216 CHIPREG_READ32(&ioc->chip->Doorbell));
2217
2218 /*
2219 * Errata workaround for SAS pci express:
2220 * Upon returning to the D0 state, the contents of the doorbell will be
2221 * stale data, and this will incorrectly signal to the host driver that
2222 * the firmware is ready to process mpt commands. The workaround is
2223 * to issue a diagnostic reset.
2224 */
2225 if (ioc->bus_type == SAS && (pdev->device ==
2226 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2227 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2228 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2229 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2230 ioc->name);
2231 goto out;
2232 }
2233 }
2234
2235 /* bring ioc to operational state */
2236 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2237 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2238 CAN_SLEEP);
2239 if (recovery_state != 0)
2240 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2241 "error:[%x]\n", ioc->name, recovery_state);
2242 else
2243 printk(MYIOC_s_INFO_FMT
2244 "pci-resume: success\n", ioc->name);
2245 out:
2246 return 0;
2247
2248 }
2249 #endif
2250
2251 static int
mpt_signal_reset(u8 index,MPT_ADAPTER * ioc,int reset_phase)2252 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2253 {
2254 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2255 ioc->bus_type != SPI) ||
2256 (MptDriverClass[index] == MPTFC_DRIVER &&
2257 ioc->bus_type != FC) ||
2258 (MptDriverClass[index] == MPTSAS_DRIVER &&
2259 ioc->bus_type != SAS))
2260 /* make sure we only call the relevant reset handler
2261 * for the bus */
2262 return 0;
2263 return (MptResetHandlers[index])(ioc, reset_phase);
2264 }
2265
2266 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2267 /**
2268 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2269 * @ioc: Pointer to MPT adapter structure
2270 * @reason: Event word / reason
2271 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2272 *
2273 * This routine performs all the steps necessary to bring the IOC
2274 * to a OPERATIONAL state.
2275 *
2276 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2277 * MPT adapter.
2278 *
2279 * Returns:
2280 * 0 for success
2281 * -1 if failed to get board READY
2282 * -2 if READY but IOCFacts Failed
2283 * -3 if READY but PrimeIOCFifos Failed
2284 * -4 if READY but IOCInit Failed
2285 * -5 if failed to enable_device and/or request_selected_regions
2286 * -6 if failed to upload firmware
2287 */
2288 static int
mpt_do_ioc_recovery(MPT_ADAPTER * ioc,u32 reason,int sleepFlag)2289 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2290 {
2291 int hard_reset_done = 0;
2292 int alt_ioc_ready = 0;
2293 int hard;
2294 int rc=0;
2295 int ii;
2296 int ret = 0;
2297 int reset_alt_ioc_active = 0;
2298 int irq_allocated = 0;
2299 u8 *a;
2300
2301 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2302 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2303
2304 /* Disable reply interrupts (also blocks FreeQ) */
2305 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2306 ioc->active = 0;
2307
2308 if (ioc->alt_ioc) {
2309 if (ioc->alt_ioc->active ||
2310 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2311 reset_alt_ioc_active = 1;
2312 /* Disable alt-IOC's reply interrupts
2313 * (and FreeQ) for a bit
2314 **/
2315 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2316 0xFFFFFFFF);
2317 ioc->alt_ioc->active = 0;
2318 }
2319 }
2320
2321 hard = 1;
2322 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2323 hard = 0;
2324
2325 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2326 if (hard_reset_done == -4) {
2327 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2328 ioc->name);
2329
2330 if (reset_alt_ioc_active && ioc->alt_ioc) {
2331 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2332 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2333 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2334 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2335 ioc->alt_ioc->active = 1;
2336 }
2337
2338 } else {
2339 printk(MYIOC_s_WARN_FMT
2340 "NOT READY WARNING!\n", ioc->name);
2341 }
2342 ret = -1;
2343 goto out;
2344 }
2345
2346 /* hard_reset_done = 0 if a soft reset was performed
2347 * and 1 if a hard reset was performed.
2348 */
2349 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2350 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2351 alt_ioc_ready = 1;
2352 else
2353 printk(MYIOC_s_WARN_FMT
2354 ": alt-ioc Not ready WARNING!\n",
2355 ioc->alt_ioc->name);
2356 }
2357
2358 for (ii=0; ii<5; ii++) {
2359 /* Get IOC facts! Allow 5 retries */
2360 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2361 break;
2362 }
2363
2364
2365 if (ii == 5) {
2366 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2367 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2368 ret = -2;
2369 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2370 MptDisplayIocCapabilities(ioc);
2371 }
2372
2373 if (alt_ioc_ready) {
2374 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2375 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2376 "Initial Alt IocFacts failed rc=%x\n",
2377 ioc->name, rc));
2378 /* Retry - alt IOC was initialized once
2379 */
2380 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2381 }
2382 if (rc) {
2383 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2384 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2385 alt_ioc_ready = 0;
2386 reset_alt_ioc_active = 0;
2387 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2388 MptDisplayIocCapabilities(ioc->alt_ioc);
2389 }
2390 }
2391
2392 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2393 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2394 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2395 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2396 IORESOURCE_IO);
2397 if (pci_enable_device(ioc->pcidev))
2398 return -5;
2399 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2400 "mpt"))
2401 return -5;
2402 }
2403
2404 /*
2405 * Device is reset now. It must have de-asserted the interrupt line
2406 * (if it was asserted) and it should be safe to register for the
2407 * interrupt now.
2408 */
2409 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2410 ioc->pci_irq = -1;
2411 if (ioc->pcidev->irq) {
2412 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2413 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2414 ioc->name);
2415 else
2416 ioc->msi_enable = 0;
2417 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2418 IRQF_SHARED, ioc->name, ioc);
2419 if (rc < 0) {
2420 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2421 "interrupt %d!\n",
2422 ioc->name, ioc->pcidev->irq);
2423 if (ioc->msi_enable)
2424 pci_disable_msi(ioc->pcidev);
2425 ret = -EBUSY;
2426 goto out;
2427 }
2428 irq_allocated = 1;
2429 ioc->pci_irq = ioc->pcidev->irq;
2430 pci_set_master(ioc->pcidev); /* ?? */
2431 pci_set_drvdata(ioc->pcidev, ioc);
2432 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2433 "installed at interrupt %d\n", ioc->name,
2434 ioc->pcidev->irq));
2435 }
2436 }
2437
2438 /* Prime reply & request queues!
2439 * (mucho alloc's) Must be done prior to
2440 * init as upper addresses are needed for init.
2441 * If fails, continue with alt-ioc processing
2442 */
2443 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2444 ioc->name));
2445 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2446 ret = -3;
2447
2448 /* May need to check/upload firmware & data here!
2449 * If fails, continue with alt-ioc processing
2450 */
2451 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2452 ioc->name));
2453 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2454 ret = -4;
2455 // NEW!
2456 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2457 printk(MYIOC_s_WARN_FMT
2458 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2459 ioc->alt_ioc->name, rc);
2460 alt_ioc_ready = 0;
2461 reset_alt_ioc_active = 0;
2462 }
2463
2464 if (alt_ioc_ready) {
2465 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2466 alt_ioc_ready = 0;
2467 reset_alt_ioc_active = 0;
2468 printk(MYIOC_s_WARN_FMT
2469 ": alt-ioc: (%d) init failure WARNING!\n",
2470 ioc->alt_ioc->name, rc);
2471 }
2472 }
2473
2474 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2475 if (ioc->upload_fw) {
2476 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2477 "firmware upload required!\n", ioc->name));
2478
2479 /* Controller is not operational, cannot do upload
2480 */
2481 if (ret == 0) {
2482 rc = mpt_do_upload(ioc, sleepFlag);
2483 if (rc == 0) {
2484 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2485 /*
2486 * Maintain only one pointer to FW memory
2487 * so there will not be two attempt to
2488 * downloadboot onboard dual function
2489 * chips (mpt_adapter_disable,
2490 * mpt_diag_reset)
2491 */
2492 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2493 "mpt_upload: alt_%s has cached_fw=%p \n",
2494 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2495 ioc->cached_fw = NULL;
2496 }
2497 } else {
2498 printk(MYIOC_s_WARN_FMT
2499 "firmware upload failure!\n", ioc->name);
2500 ret = -6;
2501 }
2502 }
2503 }
2504 }
2505
2506 /* Enable MPT base driver management of EventNotification
2507 * and EventAck handling.
2508 */
2509 if ((ret == 0) && (!ioc->facts.EventState)) {
2510 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2511 "SendEventNotification\n",
2512 ioc->name));
2513 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2514 }
2515
2516 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2517 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2518
2519 if (ret == 0) {
2520 /* Enable! (reply interrupt) */
2521 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2522 ioc->active = 1;
2523 }
2524 if (rc == 0) { /* alt ioc */
2525 if (reset_alt_ioc_active && ioc->alt_ioc) {
2526 /* (re)Enable alt-IOC! (reply interrupt) */
2527 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2528 "reply irq re-enabled\n",
2529 ioc->alt_ioc->name));
2530 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2531 MPI_HIM_DIM);
2532 ioc->alt_ioc->active = 1;
2533 }
2534 }
2535
2536
2537 /* Add additional "reason" check before call to GetLanConfigPages
2538 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2539 * recursive scenario; GetLanConfigPages times out, timer expired
2540 * routine calls HardResetHandler, which calls into here again,
2541 * and we try GetLanConfigPages again...
2542 */
2543 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2544
2545 /*
2546 * Initialize link list for inactive raid volumes.
2547 */
2548 mutex_init(&ioc->raid_data.inactive_list_mutex);
2549 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2550
2551 switch (ioc->bus_type) {
2552
2553 case SAS:
2554 /* clear persistency table */
2555 if(ioc->facts.IOCExceptions &
2556 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2557 ret = mptbase_sas_persist_operation(ioc,
2558 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2559 if(ret != 0)
2560 goto out;
2561 }
2562
2563 /* Find IM volumes
2564 */
2565 mpt_findImVolumes(ioc);
2566
2567 /* Check, and possibly reset, the coalescing value
2568 */
2569 mpt_read_ioc_pg_1(ioc);
2570
2571 break;
2572
2573 case FC:
2574 if ((ioc->pfacts[0].ProtocolFlags &
2575 MPI_PORTFACTS_PROTOCOL_LAN) &&
2576 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2577 /*
2578 * Pre-fetch the ports LAN MAC address!
2579 * (LANPage1_t stuff)
2580 */
2581 (void) GetLanConfigPages(ioc);
2582 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2583 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2584 "LanAddr = %pMR\n", ioc->name, a));
2585 }
2586 break;
2587
2588 case SPI:
2589 /* Get NVRAM and adapter maximums from SPP 0 and 2
2590 */
2591 mpt_GetScsiPortSettings(ioc, 0);
2592
2593 /* Get version and length of SDP 1
2594 */
2595 mpt_readScsiDevicePageHeaders(ioc, 0);
2596
2597 /* Find IM volumes
2598 */
2599 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2600 mpt_findImVolumes(ioc);
2601
2602 /* Check, and possibly reset, the coalescing value
2603 */
2604 mpt_read_ioc_pg_1(ioc);
2605
2606 mpt_read_ioc_pg_4(ioc);
2607
2608 break;
2609 }
2610
2611 GetIoUnitPage2(ioc);
2612 mpt_get_manufacturing_pg_0(ioc);
2613 }
2614
2615 out:
2616 if ((ret != 0) && irq_allocated) {
2617 free_irq(ioc->pci_irq, ioc);
2618 if (ioc->msi_enable)
2619 pci_disable_msi(ioc->pcidev);
2620 }
2621 return ret;
2622 }
2623
2624 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2625 /**
2626 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2627 * @ioc: Pointer to MPT adapter structure
2628 * @pdev: Pointer to (struct pci_dev) structure
2629 *
2630 * Search for PCI bus/dev_function which matches
2631 * PCI bus/dev_function (+/-1) for newly discovered 929,
2632 * 929X, 1030 or 1035.
2633 *
2634 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2635 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2636 */
2637 static void
mpt_detect_bound_ports(MPT_ADAPTER * ioc,struct pci_dev * pdev)2638 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2639 {
2640 struct pci_dev *peer=NULL;
2641 unsigned int slot = PCI_SLOT(pdev->devfn);
2642 unsigned int func = PCI_FUNC(pdev->devfn);
2643 MPT_ADAPTER *ioc_srch;
2644
2645 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2646 " searching for devfn match on %x or %x\n",
2647 ioc->name, pci_name(pdev), pdev->bus->number,
2648 pdev->devfn, func-1, func+1));
2649
2650 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2651 if (!peer) {
2652 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2653 if (!peer)
2654 return;
2655 }
2656
2657 list_for_each_entry(ioc_srch, &ioc_list, list) {
2658 struct pci_dev *_pcidev = ioc_srch->pcidev;
2659 if (_pcidev == peer) {
2660 /* Paranoia checks */
2661 if (ioc->alt_ioc != NULL) {
2662 printk(MYIOC_s_WARN_FMT
2663 "Oops, already bound (%s <==> %s)!\n",
2664 ioc->name, ioc->name, ioc->alt_ioc->name);
2665 break;
2666 } else if (ioc_srch->alt_ioc != NULL) {
2667 printk(MYIOC_s_WARN_FMT
2668 "Oops, already bound (%s <==> %s)!\n",
2669 ioc_srch->name, ioc_srch->name,
2670 ioc_srch->alt_ioc->name);
2671 break;
2672 }
2673 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2674 "FOUND! binding %s <==> %s\n",
2675 ioc->name, ioc->name, ioc_srch->name));
2676 ioc_srch->alt_ioc = ioc;
2677 ioc->alt_ioc = ioc_srch;
2678 }
2679 }
2680 pci_dev_put(peer);
2681 }
2682
2683 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2684 /**
2685 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2686 * @ioc: Pointer to MPT adapter structure
2687 */
2688 static void
mpt_adapter_disable(MPT_ADAPTER * ioc)2689 mpt_adapter_disable(MPT_ADAPTER *ioc)
2690 {
2691 int sz;
2692 int ret;
2693
2694 if (ioc->cached_fw != NULL) {
2695 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2696 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2697 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2698 ioc->cached_fw, CAN_SLEEP)) < 0) {
2699 printk(MYIOC_s_WARN_FMT
2700 ": firmware downloadboot failure (%d)!\n",
2701 ioc->name, ret);
2702 }
2703 }
2704
2705 /*
2706 * Put the controller into ready state (if its not already)
2707 */
2708 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2709 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2710 CAN_SLEEP)) {
2711 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2712 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2713 "reset failed to put ioc in ready state!\n",
2714 ioc->name, __func__);
2715 } else
2716 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2717 "failed!\n", ioc->name, __func__);
2718 }
2719
2720
2721 /* Disable adapter interrupts! */
2722 synchronize_irq(ioc->pcidev->irq);
2723 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2724 ioc->active = 0;
2725
2726 /* Clear any lingering interrupt */
2727 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2728 CHIPREG_READ32(&ioc->chip->IntStatus);
2729
2730 if (ioc->alloc != NULL) {
2731 sz = ioc->alloc_sz;
2732 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2733 ioc->name, ioc->alloc, ioc->alloc_sz));
2734 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
2735 ioc->alloc_dma);
2736 ioc->reply_frames = NULL;
2737 ioc->req_frames = NULL;
2738 ioc->alloc = NULL;
2739 ioc->alloc_total -= sz;
2740 }
2741
2742 if (ioc->sense_buf_pool != NULL) {
2743 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2744 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
2745 ioc->sense_buf_pool_dma);
2746 ioc->sense_buf_pool = NULL;
2747 ioc->alloc_total -= sz;
2748 }
2749
2750 if (ioc->events != NULL){
2751 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2752 kfree(ioc->events);
2753 ioc->events = NULL;
2754 ioc->alloc_total -= sz;
2755 }
2756
2757 mpt_free_fw_memory(ioc);
2758
2759 kfree(ioc->spi_data.nvram);
2760 mpt_inactive_raid_list_free(ioc);
2761 kfree(ioc->raid_data.pIocPg2);
2762 kfree(ioc->raid_data.pIocPg3);
2763 ioc->spi_data.nvram = NULL;
2764 ioc->raid_data.pIocPg3 = NULL;
2765
2766 if (ioc->spi_data.pIocPg4 != NULL) {
2767 sz = ioc->spi_data.IocPg4Sz;
2768 dma_free_coherent(&ioc->pcidev->dev, sz,
2769 ioc->spi_data.pIocPg4,
2770 ioc->spi_data.IocPg4_dma);
2771 ioc->spi_data.pIocPg4 = NULL;
2772 ioc->alloc_total -= sz;
2773 }
2774
2775 if (ioc->ReqToChain != NULL) {
2776 kfree(ioc->ReqToChain);
2777 kfree(ioc->RequestNB);
2778 ioc->ReqToChain = NULL;
2779 }
2780
2781 kfree(ioc->ChainToChain);
2782 ioc->ChainToChain = NULL;
2783
2784 if (ioc->HostPageBuffer != NULL) {
2785 if((ret = mpt_host_page_access_control(ioc,
2786 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2787 printk(MYIOC_s_ERR_FMT
2788 ": %s: host page buffers free failed (%d)!\n",
2789 ioc->name, __func__, ret);
2790 }
2791 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2792 "HostPageBuffer free @ %p, sz=%d bytes\n",
2793 ioc->name, ioc->HostPageBuffer,
2794 ioc->HostPageBuffer_sz));
2795 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz,
2796 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2797 ioc->HostPageBuffer = NULL;
2798 ioc->HostPageBuffer_sz = 0;
2799 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2800 }
2801
2802 pci_set_drvdata(ioc->pcidev, NULL);
2803 }
2804 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2805 /**
2806 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2807 * @ioc: Pointer to MPT adapter structure
2808 *
2809 * This routine unregisters h/w resources and frees all alloc'd memory
2810 * associated with a MPT adapter structure.
2811 */
2812 static void
mpt_adapter_dispose(MPT_ADAPTER * ioc)2813 mpt_adapter_dispose(MPT_ADAPTER *ioc)
2814 {
2815 int sz_first, sz_last;
2816
2817 if (ioc == NULL)
2818 return;
2819
2820 sz_first = ioc->alloc_total;
2821
2822 mpt_adapter_disable(ioc);
2823
2824 if (ioc->pci_irq != -1) {
2825 free_irq(ioc->pci_irq, ioc);
2826 if (ioc->msi_enable)
2827 pci_disable_msi(ioc->pcidev);
2828 ioc->pci_irq = -1;
2829 }
2830
2831 if (ioc->memmap != NULL) {
2832 iounmap(ioc->memmap);
2833 ioc->memmap = NULL;
2834 }
2835
2836 pci_disable_device(ioc->pcidev);
2837 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2838
2839 /* Zap the adapter lookup ptr! */
2840 list_del(&ioc->list);
2841
2842 sz_last = ioc->alloc_total;
2843 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2844 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2845
2846 if (ioc->alt_ioc)
2847 ioc->alt_ioc->alt_ioc = NULL;
2848
2849 kfree(ioc);
2850 }
2851
2852 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2853 /**
2854 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2855 * @ioc: Pointer to MPT adapter structure
2856 */
2857 static void
MptDisplayIocCapabilities(MPT_ADAPTER * ioc)2858 MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2859 {
2860 int i = 0;
2861
2862 printk(KERN_INFO "%s: ", ioc->name);
2863 if (ioc->prod_name)
2864 pr_cont("%s: ", ioc->prod_name);
2865 pr_cont("Capabilities={");
2866
2867 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2868 pr_cont("Initiator");
2869 i++;
2870 }
2871
2872 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2873 pr_cont("%sTarget", i ? "," : "");
2874 i++;
2875 }
2876
2877 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2878 pr_cont("%sLAN", i ? "," : "");
2879 i++;
2880 }
2881
2882 #if 0
2883 /*
2884 * This would probably evoke more questions than it's worth
2885 */
2886 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2887 pr_cont("%sLogBusAddr", i ? "," : "");
2888 i++;
2889 }
2890 #endif
2891
2892 pr_cont("}\n");
2893 }
2894
2895 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2896 /**
2897 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2898 * @ioc: Pointer to MPT_ADAPTER structure
2899 * @force: Force hard KickStart of IOC
2900 * @sleepFlag: Specifies whether the process can sleep
2901 *
2902 * Returns:
2903 * 1 - DIAG reset and READY
2904 * 0 - READY initially OR soft reset and READY
2905 * -1 - Any failure on KickStart
2906 * -2 - Msg Unit Reset Failed
2907 * -3 - IO Unit Reset Failed
2908 * -4 - IOC owned by a PEER
2909 */
2910 static int
MakeIocReady(MPT_ADAPTER * ioc,int force,int sleepFlag)2911 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2912 {
2913 u32 ioc_state;
2914 int statefault = 0;
2915 int cntdn;
2916 int hard_reset_done = 0;
2917 int r;
2918 int ii;
2919 int whoinit;
2920
2921 /* Get current [raw] IOC state */
2922 ioc_state = mpt_GetIocState(ioc, 0);
2923 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2924
2925 /*
2926 * Check to see if IOC got left/stuck in doorbell handshake
2927 * grip of death. If so, hard reset the IOC.
2928 */
2929 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2930 statefault = 1;
2931 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2932 ioc->name);
2933 }
2934
2935 /* Is it already READY? */
2936 if (!statefault &&
2937 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2938 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2939 "IOC is in READY state\n", ioc->name));
2940 return 0;
2941 }
2942
2943 /*
2944 * Check to see if IOC is in FAULT state.
2945 */
2946 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2947 statefault = 2;
2948 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2949 ioc->name);
2950 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2951 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2952 }
2953
2954 /*
2955 * Hmmm... Did it get left operational?
2956 */
2957 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2958 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2959 ioc->name));
2960
2961 /* Check WhoInit.
2962 * If PCI Peer, exit.
2963 * Else, if no fault conditions are present, issue a MessageUnitReset
2964 * Else, fall through to KickStart case
2965 */
2966 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2967 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2968 "whoinit 0x%x statefault %d force %d\n",
2969 ioc->name, whoinit, statefault, force));
2970 if (whoinit == MPI_WHOINIT_PCI_PEER)
2971 return -4;
2972 else {
2973 if ((statefault == 0 ) && (force == 0)) {
2974 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2975 return 0;
2976 }
2977 statefault = 3;
2978 }
2979 }
2980
2981 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2982 if (hard_reset_done < 0)
2983 return -1;
2984
2985 /*
2986 * Loop here waiting for IOC to come READY.
2987 */
2988 ii = 0;
2989 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2990
2991 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2992 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2993 /*
2994 * BIOS or previous driver load left IOC in OP state.
2995 * Reset messaging FIFOs.
2996 */
2997 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2998 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2999 return -2;
3000 }
3001 } else if (ioc_state == MPI_IOC_STATE_RESET) {
3002 /*
3003 * Something is wrong. Try to get IOC back
3004 * to a known state.
3005 */
3006 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3007 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3008 return -3;
3009 }
3010 }
3011
3012 ii++; cntdn--;
3013 if (!cntdn) {
3014 printk(MYIOC_s_ERR_FMT
3015 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3016 ioc->name, ioc_state, (int)((ii+5)/HZ));
3017 return -ETIME;
3018 }
3019
3020 if (sleepFlag == CAN_SLEEP) {
3021 msleep(1);
3022 } else {
3023 mdelay (1); /* 1 msec delay */
3024 }
3025
3026 }
3027
3028 if (statefault < 3) {
3029 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3030 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3031 }
3032
3033 return hard_reset_done;
3034 }
3035
3036 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3037 /**
3038 * mpt_GetIocState - Get the current state of a MPT adapter.
3039 * @ioc: Pointer to MPT_ADAPTER structure
3040 * @cooked: Request raw or cooked IOC state
3041 *
3042 * Returns all IOC Doorbell register bits if cooked==0, else just the
3043 * Doorbell bits in MPI_IOC_STATE_MASK.
3044 */
3045 u32
mpt_GetIocState(MPT_ADAPTER * ioc,int cooked)3046 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3047 {
3048 u32 s, sc;
3049
3050 /* Get! */
3051 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3052 sc = s & MPI_IOC_STATE_MASK;
3053
3054 /* Save! */
3055 ioc->last_state = sc;
3056
3057 return cooked ? sc : s;
3058 }
3059
3060 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3061 /**
3062 * GetIocFacts - Send IOCFacts request to MPT adapter.
3063 * @ioc: Pointer to MPT_ADAPTER structure
3064 * @sleepFlag: Specifies whether the process can sleep
3065 * @reason: If recovery, only update facts.
3066 *
3067 * Returns 0 for success, non-zero for failure.
3068 */
3069 static int
GetIocFacts(MPT_ADAPTER * ioc,int sleepFlag,int reason)3070 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3071 {
3072 IOCFacts_t get_facts;
3073 IOCFactsReply_t *facts;
3074 int r;
3075 int req_sz;
3076 int reply_sz;
3077 int sz;
3078 u32 vv;
3079 u8 shiftFactor=1;
3080
3081 /* IOC *must* NOT be in RESET state! */
3082 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3083 printk(KERN_ERR MYNAM
3084 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3085 ioc->name, ioc->last_state);
3086 return -44;
3087 }
3088
3089 facts = &ioc->facts;
3090
3091 /* Destination (reply area)... */
3092 reply_sz = sizeof(*facts);
3093 memset(facts, 0, reply_sz);
3094
3095 /* Request area (get_facts on the stack right now!) */
3096 req_sz = sizeof(get_facts);
3097 memset(&get_facts, 0, req_sz);
3098
3099 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3100 /* Assert: All other get_facts fields are zero! */
3101
3102 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3103 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3104 ioc->name, req_sz, reply_sz));
3105
3106 /* No non-zero fields in the get_facts request are greater than
3107 * 1 byte in size, so we can just fire it off as is.
3108 */
3109 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3110 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3111 if (r != 0)
3112 return r;
3113
3114 /*
3115 * Now byte swap (GRRR) the necessary fields before any further
3116 * inspection of reply contents.
3117 *
3118 * But need to do some sanity checks on MsgLength (byte) field
3119 * to make sure we don't zero IOC's req_sz!
3120 */
3121 /* Did we get a valid reply? */
3122 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3123 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3124 /*
3125 * If not been here, done that, save off first WhoInit value
3126 */
3127 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3128 ioc->FirstWhoInit = facts->WhoInit;
3129 }
3130
3131 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3132 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3133 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3134 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3135 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3136 /* CHECKME! IOCStatus, IOCLogInfo */
3137
3138 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3139 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3140
3141 /*
3142 * FC f/w version changed between 1.1 and 1.2
3143 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3144 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3145 */
3146 if (facts->MsgVersion < MPI_VERSION_01_02) {
3147 /*
3148 * Handle old FC f/w style, convert to new...
3149 */
3150 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3151 facts->FWVersion.Word =
3152 ((oldv<<12) & 0xFF000000) |
3153 ((oldv<<8) & 0x000FFF00);
3154 } else
3155 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3156
3157 facts->ProductID = le16_to_cpu(facts->ProductID);
3158
3159 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3160 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3161 ioc->ir_firmware = 1;
3162
3163 facts->CurrentHostMfaHighAddr =
3164 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3165 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3166 facts->CurrentSenseBufferHighAddr =
3167 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3168 facts->CurReplyFrameSize =
3169 le16_to_cpu(facts->CurReplyFrameSize);
3170 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3171
3172 /*
3173 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3174 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3175 * to 14 in MPI-1.01.0x.
3176 */
3177 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3178 facts->MsgVersion > MPI_VERSION_01_00) {
3179 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3180 }
3181
3182 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3183
3184 if (!facts->RequestFrameSize) {
3185 /* Something is wrong! */
3186 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3187 ioc->name);
3188 return -55;
3189 }
3190
3191 r = sz = facts->BlockSize;
3192 vv = ((63 / (sz * 4)) + 1) & 0x03;
3193 ioc->NB_for_64_byte_frame = vv;
3194 while ( sz )
3195 {
3196 shiftFactor++;
3197 sz = sz >> 1;
3198 }
3199 ioc->NBShiftFactor = shiftFactor;
3200 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3201 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3202 ioc->name, vv, shiftFactor, r));
3203
3204 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3205 /*
3206 * Set values for this IOC's request & reply frame sizes,
3207 * and request & reply queue depths...
3208 */
3209 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3210 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3211 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3212 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3213
3214 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3215 ioc->name, ioc->reply_sz, ioc->reply_depth));
3216 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3217 ioc->name, ioc->req_sz, ioc->req_depth));
3218
3219 /* Get port facts! */
3220 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3221 return r;
3222 }
3223 } else {
3224 printk(MYIOC_s_ERR_FMT
3225 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3226 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3227 RequestFrameSize)/sizeof(u32)));
3228 return -66;
3229 }
3230
3231 return 0;
3232 }
3233
3234 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3235 /**
3236 * GetPortFacts - Send PortFacts request to MPT adapter.
3237 * @ioc: Pointer to MPT_ADAPTER structure
3238 * @portnum: Port number
3239 * @sleepFlag: Specifies whether the process can sleep
3240 *
3241 * Returns 0 for success, non-zero for failure.
3242 */
3243 static int
GetPortFacts(MPT_ADAPTER * ioc,int portnum,int sleepFlag)3244 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3245 {
3246 PortFacts_t get_pfacts;
3247 PortFactsReply_t *pfacts;
3248 int ii;
3249 int req_sz;
3250 int reply_sz;
3251 int max_id;
3252
3253 /* IOC *must* NOT be in RESET state! */
3254 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3255 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3256 ioc->name, ioc->last_state );
3257 return -4;
3258 }
3259
3260 pfacts = &ioc->pfacts[portnum];
3261
3262 /* Destination (reply area)... */
3263 reply_sz = sizeof(*pfacts);
3264 memset(pfacts, 0, reply_sz);
3265
3266 /* Request area (get_pfacts on the stack right now!) */
3267 req_sz = sizeof(get_pfacts);
3268 memset(&get_pfacts, 0, req_sz);
3269
3270 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3271 get_pfacts.PortNumber = portnum;
3272 /* Assert: All other get_pfacts fields are zero! */
3273
3274 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3275 ioc->name, portnum));
3276
3277 /* No non-zero fields in the get_pfacts request are greater than
3278 * 1 byte in size, so we can just fire it off as is.
3279 */
3280 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3281 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3282 if (ii != 0)
3283 return ii;
3284
3285 /* Did we get a valid reply? */
3286
3287 /* Now byte swap the necessary fields in the response. */
3288 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3289 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3290 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3291 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3292 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3293 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3294 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3295 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3296 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3297
3298 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3299 pfacts->MaxDevices;
3300 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3301 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3302
3303 /*
3304 * Place all the devices on channels
3305 *
3306 * (for debuging)
3307 */
3308 if (mpt_channel_mapping) {
3309 ioc->devices_per_bus = 1;
3310 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3311 }
3312
3313 return 0;
3314 }
3315
3316 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3317 /**
3318 * SendIocInit - Send IOCInit request to MPT adapter.
3319 * @ioc: Pointer to MPT_ADAPTER structure
3320 * @sleepFlag: Specifies whether the process can sleep
3321 *
3322 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3323 *
3324 * Returns 0 for success, non-zero for failure.
3325 */
3326 static int
SendIocInit(MPT_ADAPTER * ioc,int sleepFlag)3327 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3328 {
3329 IOCInit_t ioc_init;
3330 MPIDefaultReply_t init_reply;
3331 u32 state;
3332 int r;
3333 int count;
3334 int cntdn;
3335
3336 memset(&ioc_init, 0, sizeof(ioc_init));
3337 memset(&init_reply, 0, sizeof(init_reply));
3338
3339 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3340 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3341
3342 /* If we are in a recovery mode and we uploaded the FW image,
3343 * then this pointer is not NULL. Skip the upload a second time.
3344 * Set this flag if cached_fw set for either IOC.
3345 */
3346 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3347 ioc->upload_fw = 1;
3348 else
3349 ioc->upload_fw = 0;
3350 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3351 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3352
3353 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3354 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3355
3356 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3357 ioc->name, ioc->facts.MsgVersion));
3358 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3359 // set MsgVersion and HeaderVersion host driver was built with
3360 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3361 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3362
3363 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3364 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3365 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3366 return -99;
3367 }
3368 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3369
3370 if (ioc->sg_addr_size == sizeof(u64)) {
3371 /* Save the upper 32-bits of the request
3372 * (reply) and sense buffers.
3373 */
3374 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3375 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3376 } else {
3377 /* Force 32-bit addressing */
3378 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3379 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3380 }
3381
3382 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3383 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3384 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3385 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3386
3387 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3388 ioc->name, &ioc_init));
3389
3390 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3391 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3392 if (r != 0) {
3393 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3394 return r;
3395 }
3396
3397 /* No need to byte swap the multibyte fields in the reply
3398 * since we don't even look at its contents.
3399 */
3400
3401 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3402 ioc->name, &ioc_init));
3403
3404 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3405 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3406 return r;
3407 }
3408
3409 /* YIKES! SUPER IMPORTANT!!!
3410 * Poll IocState until _OPERATIONAL while IOC is doing
3411 * LoopInit and TargetDiscovery!
3412 */
3413 count = 0;
3414 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3415 state = mpt_GetIocState(ioc, 1);
3416 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3417 if (sleepFlag == CAN_SLEEP) {
3418 msleep(1);
3419 } else {
3420 mdelay(1);
3421 }
3422
3423 if (!cntdn) {
3424 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3425 ioc->name, (int)((count+5)/HZ));
3426 return -9;
3427 }
3428
3429 state = mpt_GetIocState(ioc, 1);
3430 count++;
3431 }
3432 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3433 ioc->name, count));
3434
3435 ioc->aen_event_read_flag=0;
3436 return r;
3437 }
3438
3439 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3440 /**
3441 * SendPortEnable - Send PortEnable request to MPT adapter port.
3442 * @ioc: Pointer to MPT_ADAPTER structure
3443 * @portnum: Port number to enable
3444 * @sleepFlag: Specifies whether the process can sleep
3445 *
3446 * Send PortEnable to bring IOC to OPERATIONAL state.
3447 *
3448 * Returns 0 for success, non-zero for failure.
3449 */
3450 static int
SendPortEnable(MPT_ADAPTER * ioc,int portnum,int sleepFlag)3451 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3452 {
3453 PortEnable_t port_enable;
3454 MPIDefaultReply_t reply_buf;
3455 int rc;
3456 int req_sz;
3457 int reply_sz;
3458
3459 /* Destination... */
3460 reply_sz = sizeof(MPIDefaultReply_t);
3461 memset(&reply_buf, 0, reply_sz);
3462
3463 req_sz = sizeof(PortEnable_t);
3464 memset(&port_enable, 0, req_sz);
3465
3466 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3467 port_enable.PortNumber = portnum;
3468 /* port_enable.ChainOffset = 0; */
3469 /* port_enable.MsgFlags = 0; */
3470 /* port_enable.MsgContext = 0; */
3471
3472 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3473 ioc->name, portnum, &port_enable));
3474
3475 /* RAID FW may take a long time to enable
3476 */
3477 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3478 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3479 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3480 300 /*seconds*/, sleepFlag);
3481 } else {
3482 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3483 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3484 30 /*seconds*/, sleepFlag);
3485 }
3486 return rc;
3487 }
3488
3489 /**
3490 * mpt_alloc_fw_memory - allocate firmware memory
3491 * @ioc: Pointer to MPT_ADAPTER structure
3492 * @size: total FW bytes
3493 *
3494 * If memory has already been allocated, the same (cached) value
3495 * is returned.
3496 *
3497 * Return 0 if successful, or non-zero for failure
3498 **/
3499 int
mpt_alloc_fw_memory(MPT_ADAPTER * ioc,int size)3500 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3501 {
3502 int rc;
3503
3504 if (ioc->cached_fw) {
3505 rc = 0; /* use already allocated memory */
3506 goto out;
3507 }
3508 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3509 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3510 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3511 rc = 0;
3512 goto out;
3513 }
3514 ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size,
3515 &ioc->cached_fw_dma, GFP_ATOMIC);
3516 if (!ioc->cached_fw) {
3517 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3518 ioc->name);
3519 rc = -1;
3520 } else {
3521 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3522 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3523 ioc->alloc_total += size;
3524 rc = 0;
3525 }
3526 out:
3527 return rc;
3528 }
3529
3530 /**
3531 * mpt_free_fw_memory - free firmware memory
3532 * @ioc: Pointer to MPT_ADAPTER structure
3533 *
3534 * If alt_img is NULL, delete from ioc structure.
3535 * Else, delete a secondary image in same format.
3536 **/
3537 void
mpt_free_fw_memory(MPT_ADAPTER * ioc)3538 mpt_free_fw_memory(MPT_ADAPTER *ioc)
3539 {
3540 int sz;
3541
3542 if (!ioc->cached_fw)
3543 return;
3544
3545 sz = ioc->facts.FWImageSize;
3546 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3547 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3548 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw,
3549 ioc->cached_fw_dma);
3550 ioc->alloc_total -= sz;
3551 ioc->cached_fw = NULL;
3552 }
3553
3554 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3555 /**
3556 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3557 * @ioc: Pointer to MPT_ADAPTER structure
3558 * @sleepFlag: Specifies whether the process can sleep
3559 *
3560 * Returns 0 for success, >0 for handshake failure
3561 * <0 for fw upload failure.
3562 *
3563 * Remark: If bound IOC and a successful FWUpload was performed
3564 * on the bound IOC, the second image is discarded
3565 * and memory is free'd. Both channels must upload to prevent
3566 * IOC from running in degraded mode.
3567 */
3568 static int
mpt_do_upload(MPT_ADAPTER * ioc,int sleepFlag)3569 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3570 {
3571 u8 reply[sizeof(FWUploadReply_t)];
3572 FWUpload_t *prequest;
3573 FWUploadReply_t *preply;
3574 FWUploadTCSGE_t *ptcsge;
3575 u32 flagsLength;
3576 int ii, sz, reply_sz;
3577 int cmdStatus;
3578 int request_size;
3579 /* If the image size is 0, we are done.
3580 */
3581 if ((sz = ioc->facts.FWImageSize) == 0)
3582 return 0;
3583
3584 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3585 return -ENOMEM;
3586
3587 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3588 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3589
3590 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3591 kzalloc(ioc->req_sz, GFP_KERNEL);
3592 if (!prequest) {
3593 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3594 "while allocating memory \n", ioc->name));
3595 mpt_free_fw_memory(ioc);
3596 return -ENOMEM;
3597 }
3598
3599 preply = (FWUploadReply_t *)&reply;
3600
3601 reply_sz = sizeof(reply);
3602 memset(preply, 0, reply_sz);
3603
3604 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3605 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3606
3607 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3608 ptcsge->DetailsLength = 12;
3609 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3610 ptcsge->ImageSize = cpu_to_le32(sz);
3611 ptcsge++;
3612
3613 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3614 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3615 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3616 ioc->SGE_size;
3617 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3618 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3619 ioc->facts.FWImageSize, request_size));
3620 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3621
3622 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3623 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3624
3625 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3626 "rc=%x \n", ioc->name, ii));
3627
3628 cmdStatus = -EFAULT;
3629 if (ii == 0) {
3630 /* Handshake transfer was complete and successful.
3631 * Check the Reply Frame.
3632 */
3633 int status;
3634 status = le16_to_cpu(preply->IOCStatus) &
3635 MPI_IOCSTATUS_MASK;
3636 if (status == MPI_IOCSTATUS_SUCCESS &&
3637 ioc->facts.FWImageSize ==
3638 le32_to_cpu(preply->ActualImageSize))
3639 cmdStatus = 0;
3640 }
3641 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3642 ioc->name, cmdStatus));
3643
3644
3645 if (cmdStatus) {
3646 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3647 "freeing image \n", ioc->name));
3648 mpt_free_fw_memory(ioc);
3649 }
3650 kfree(prequest);
3651
3652 return cmdStatus;
3653 }
3654
3655 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3656 /**
3657 * mpt_downloadboot - DownloadBoot code
3658 * @ioc: Pointer to MPT_ADAPTER structure
3659 * @pFwHeader: Pointer to firmware header info
3660 * @sleepFlag: Specifies whether the process can sleep
3661 *
3662 * FwDownloadBoot requires Programmed IO access.
3663 *
3664 * Returns 0 for success
3665 * -1 FW Image size is 0
3666 * -2 No valid cached_fw Pointer
3667 * <0 for fw upload failure.
3668 */
3669 static int
mpt_downloadboot(MPT_ADAPTER * ioc,MpiFwHeader_t * pFwHeader,int sleepFlag)3670 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3671 {
3672 MpiExtImageHeader_t *pExtImage;
3673 u32 fwSize;
3674 u32 diag0val;
3675 int count;
3676 u32 *ptrFw;
3677 u32 diagRwData;
3678 u32 nextImage;
3679 u32 load_addr;
3680 u32 ioc_state=0;
3681
3682 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3683 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3684
3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3688 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3690 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3691
3692 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3693
3694 /* wait 1 msec */
3695 if (sleepFlag == CAN_SLEEP) {
3696 msleep(1);
3697 } else {
3698 mdelay (1);
3699 }
3700
3701 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3702 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3703
3704 for (count = 0; count < 30; count ++) {
3705 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3706 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3707 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3708 ioc->name, count));
3709 break;
3710 }
3711 /* wait .1 sec */
3712 if (sleepFlag == CAN_SLEEP) {
3713 msleep (100);
3714 } else {
3715 mdelay (100);
3716 }
3717 }
3718
3719 if ( count == 30 ) {
3720 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3721 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3722 ioc->name, diag0val));
3723 return -3;
3724 }
3725
3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3729 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3731 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3732
3733 /* Set the DiagRwEn and Disable ARM bits */
3734 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3735
3736 fwSize = (pFwHeader->ImageSize + 3)/4;
3737 ptrFw = (u32 *) pFwHeader;
3738
3739 /* Write the LoadStartAddress to the DiagRw Address Register
3740 * using Programmed IO
3741 */
3742 if (ioc->errata_flag_1064)
3743 pci_enable_io_access(ioc->pcidev);
3744
3745 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3746 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3747 ioc->name, pFwHeader->LoadStartAddress));
3748
3749 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3750 ioc->name, fwSize*4, ptrFw));
3751 while (fwSize--) {
3752 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3753 }
3754
3755 nextImage = pFwHeader->NextImageHeaderOffset;
3756 while (nextImage) {
3757 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3758
3759 load_addr = pExtImage->LoadStartAddress;
3760
3761 fwSize = (pExtImage->ImageSize + 3) >> 2;
3762 ptrFw = (u32 *)pExtImage;
3763
3764 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3765 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3766 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3767
3768 while (fwSize--) {
3769 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3770 }
3771 nextImage = pExtImage->NextImageHeaderOffset;
3772 }
3773
3774 /* Write the IopResetVectorRegAddr */
3775 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3776 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3777
3778 /* Write the IopResetVectorValue */
3779 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3780 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3781
3782 /* Clear the internal flash bad bit - autoincrementing register,
3783 * so must do two writes.
3784 */
3785 if (ioc->bus_type == SPI) {
3786 /*
3787 * 1030 and 1035 H/W errata, workaround to access
3788 * the ClearFlashBadSignatureBit
3789 */
3790 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3791 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3792 diagRwData |= 0x40000000;
3793 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3794 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3795
3796 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3797 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3798 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3799 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3800
3801 /* wait 1 msec */
3802 if (sleepFlag == CAN_SLEEP) {
3803 msleep (1);
3804 } else {
3805 mdelay (1);
3806 }
3807 }
3808
3809 if (ioc->errata_flag_1064)
3810 pci_disable_io_access(ioc->pcidev);
3811
3812 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3813 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3814 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3815 ioc->name, diag0val));
3816 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3817 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3818 ioc->name, diag0val));
3819 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3820
3821 /* Write 0xFF to reset the sequencer */
3822 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3823
3824 if (ioc->bus_type == SAS) {
3825 ioc_state = mpt_GetIocState(ioc, 0);
3826 if ( (GetIocFacts(ioc, sleepFlag,
3827 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3828 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3829 ioc->name, ioc_state));
3830 return -EFAULT;
3831 }
3832 }
3833
3834 for (count=0; count<HZ*20; count++) {
3835 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3836 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3837 "downloadboot successful! (count=%d) IocState=%x\n",
3838 ioc->name, count, ioc_state));
3839 if (ioc->bus_type == SAS) {
3840 return 0;
3841 }
3842 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3843 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3844 "downloadboot: SendIocInit failed\n",
3845 ioc->name));
3846 return -EFAULT;
3847 }
3848 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3849 "downloadboot: SendIocInit successful\n",
3850 ioc->name));
3851 return 0;
3852 }
3853 if (sleepFlag == CAN_SLEEP) {
3854 msleep (10);
3855 } else {
3856 mdelay (10);
3857 }
3858 }
3859 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3860 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3861 return -EFAULT;
3862 }
3863
3864 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3865 /**
3866 * KickStart - Perform hard reset of MPT adapter.
3867 * @ioc: Pointer to MPT_ADAPTER structure
3868 * @force: Force hard reset
3869 * @sleepFlag: Specifies whether the process can sleep
3870 *
3871 * This routine places MPT adapter in diagnostic mode via the
3872 * WriteSequence register, and then performs a hard reset of adapter
3873 * via the Diagnostic register.
3874 *
3875 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3876 * or NO_SLEEP (interrupt thread, use mdelay)
3877 * force - 1 if doorbell active, board fault state
3878 * board operational, IOC_RECOVERY or
3879 * IOC_BRINGUP and there is an alt_ioc.
3880 * 0 else
3881 *
3882 * Returns:
3883 * 1 - hard reset, READY
3884 * 0 - no reset due to History bit, READY
3885 * -1 - no reset due to History bit but not READY
3886 * OR reset but failed to come READY
3887 * -2 - no reset, could not enter DIAG mode
3888 * -3 - reset but bad FW bit
3889 */
3890 static int
KickStart(MPT_ADAPTER * ioc,int force,int sleepFlag)3891 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3892 {
3893 int hard_reset_done = 0;
3894 u32 ioc_state=0;
3895 int cnt,cntdn;
3896
3897 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3898 if (ioc->bus_type == SPI) {
3899 /* Always issue a Msg Unit Reset first. This will clear some
3900 * SCSI bus hang conditions.
3901 */
3902 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3903
3904 if (sleepFlag == CAN_SLEEP) {
3905 msleep (1000);
3906 } else {
3907 mdelay (1000);
3908 }
3909 }
3910
3911 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3912 if (hard_reset_done < 0)
3913 return hard_reset_done;
3914
3915 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3916 ioc->name));
3917
3918 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3919 for (cnt=0; cnt<cntdn; cnt++) {
3920 ioc_state = mpt_GetIocState(ioc, 1);
3921 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3922 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3923 ioc->name, cnt));
3924 return hard_reset_done;
3925 }
3926 if (sleepFlag == CAN_SLEEP) {
3927 msleep (10);
3928 } else {
3929 mdelay (10);
3930 }
3931 }
3932
3933 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3934 ioc->name, mpt_GetIocState(ioc, 0)));
3935 return -1;
3936 }
3937
3938 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3939 /**
3940 * mpt_diag_reset - Perform hard reset of the adapter.
3941 * @ioc: Pointer to MPT_ADAPTER structure
3942 * @ignore: Set if to honor and clear to ignore
3943 * the reset history bit
3944 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3945 * else set to NO_SLEEP (use mdelay instead)
3946 *
3947 * This routine places the adapter in diagnostic mode via the
3948 * WriteSequence register and then performs a hard reset of adapter
3949 * via the Diagnostic register. Adapter should be in ready state
3950 * upon successful completion.
3951 *
3952 * Returns: 1 hard reset successful
3953 * 0 no reset performed because reset history bit set
3954 * -2 enabling diagnostic mode failed
3955 * -3 diagnostic reset failed
3956 */
3957 static int
mpt_diag_reset(MPT_ADAPTER * ioc,int ignore,int sleepFlag)3958 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3959 {
3960 u32 diag0val;
3961 u32 doorbell;
3962 int hard_reset_done = 0;
3963 int count = 0;
3964 u32 diag1val = 0;
3965 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3966 u8 cb_idx;
3967
3968 /* Clear any existing interrupts */
3969 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3970
3971 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3972
3973 if (!ignore)
3974 return 0;
3975
3976 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3977 "address=%p\n", ioc->name, __func__,
3978 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3979 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3980 if (sleepFlag == CAN_SLEEP)
3981 msleep(1);
3982 else
3983 mdelay(1);
3984
3985 /*
3986 * Call each currently registered protocol IOC reset handler
3987 * with pre-reset indication.
3988 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3989 * MptResetHandlers[] registered yet.
3990 */
3991 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3992 if (MptResetHandlers[cb_idx])
3993 (*(MptResetHandlers[cb_idx]))(ioc,
3994 MPT_IOC_PRE_RESET);
3995 }
3996
3997 for (count = 0; count < 60; count ++) {
3998 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3999 doorbell &= MPI_IOC_STATE_MASK;
4000
4001 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4002 "looking for READY STATE: doorbell=%x"
4003 " count=%d\n",
4004 ioc->name, doorbell, count));
4005
4006 if (doorbell == MPI_IOC_STATE_READY) {
4007 return 1;
4008 }
4009
4010 /* wait 1 sec */
4011 if (sleepFlag == CAN_SLEEP)
4012 msleep(1000);
4013 else
4014 mdelay(1000);
4015 }
4016 return -1;
4017 }
4018
4019 /* Use "Diagnostic reset" method! (only thing available!) */
4020 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4021
4022 if (ioc->debug_level & MPT_DEBUG) {
4023 if (ioc->alt_ioc)
4024 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4025 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4026 ioc->name, diag0val, diag1val));
4027 }
4028
4029 /* Do the reset if we are told to ignore the reset history
4030 * or if the reset history is 0
4031 */
4032 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4033 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4034 /* Write magic sequence to WriteSequence register
4035 * Loop until in diagnostic mode
4036 */
4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4040 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4042 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4043
4044 /* wait 100 msec */
4045 if (sleepFlag == CAN_SLEEP) {
4046 msleep (100);
4047 } else {
4048 mdelay (100);
4049 }
4050
4051 count++;
4052 if (count > 20) {
4053 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4054 ioc->name, diag0val);
4055 return -2;
4056
4057 }
4058
4059 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4060
4061 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4062 ioc->name, diag0val));
4063 }
4064
4065 if (ioc->debug_level & MPT_DEBUG) {
4066 if (ioc->alt_ioc)
4067 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4068 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4069 ioc->name, diag0val, diag1val));
4070 }
4071 /*
4072 * Disable the ARM (Bug fix)
4073 *
4074 */
4075 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4076 mdelay(1);
4077
4078 /*
4079 * Now hit the reset bit in the Diagnostic register
4080 * (THE BIG HAMMER!) (Clears DRWE bit).
4081 */
4082 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4083 hard_reset_done = 1;
4084 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4085 ioc->name));
4086
4087 /*
4088 * Call each currently registered protocol IOC reset handler
4089 * with pre-reset indication.
4090 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4091 * MptResetHandlers[] registered yet.
4092 */
4093 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4094 if (MptResetHandlers[cb_idx]) {
4095 mpt_signal_reset(cb_idx,
4096 ioc, MPT_IOC_PRE_RESET);
4097 if (ioc->alt_ioc) {
4098 mpt_signal_reset(cb_idx,
4099 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4100 }
4101 }
4102 }
4103
4104 if (ioc->cached_fw)
4105 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4106 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4107 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4108 else
4109 cached_fw = NULL;
4110 if (cached_fw) {
4111 /* If the DownloadBoot operation fails, the
4112 * IOC will be left unusable. This is a fatal error
4113 * case. _diag_reset will return < 0
4114 */
4115 for (count = 0; count < 30; count ++) {
4116 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4117 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4118 break;
4119 }
4120
4121 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4122 ioc->name, diag0val, count));
4123 /* wait 1 sec */
4124 if (sleepFlag == CAN_SLEEP) {
4125 msleep (1000);
4126 } else {
4127 mdelay (1000);
4128 }
4129 }
4130 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4131 printk(MYIOC_s_WARN_FMT
4132 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4133 }
4134
4135 } else {
4136 /* Wait for FW to reload and for board
4137 * to go to the READY state.
4138 * Maximum wait is 60 seconds.
4139 * If fail, no error will check again
4140 * with calling program.
4141 */
4142 for (count = 0; count < 60; count ++) {
4143 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4144 doorbell &= MPI_IOC_STATE_MASK;
4145
4146 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4147 "looking for READY STATE: doorbell=%x"
4148 " count=%d\n", ioc->name, doorbell, count));
4149
4150 if (doorbell == MPI_IOC_STATE_READY) {
4151 break;
4152 }
4153
4154 /* wait 1 sec */
4155 if (sleepFlag == CAN_SLEEP) {
4156 msleep (1000);
4157 } else {
4158 mdelay (1000);
4159 }
4160 }
4161
4162 if (doorbell != MPI_IOC_STATE_READY)
4163 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4164 "after reset! IocState=%x", ioc->name,
4165 doorbell);
4166 }
4167 }
4168
4169 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4170 if (ioc->debug_level & MPT_DEBUG) {
4171 if (ioc->alt_ioc)
4172 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4173 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4174 ioc->name, diag0val, diag1val));
4175 }
4176
4177 /* Clear RESET_HISTORY bit! Place board in the
4178 * diagnostic mode to update the diag register.
4179 */
4180 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4181 count = 0;
4182 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4183 /* Write magic sequence to WriteSequence register
4184 * Loop until in diagnostic mode
4185 */
4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4189 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4191 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4192
4193 /* wait 100 msec */
4194 if (sleepFlag == CAN_SLEEP) {
4195 msleep (100);
4196 } else {
4197 mdelay (100);
4198 }
4199
4200 count++;
4201 if (count > 20) {
4202 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4203 ioc->name, diag0val);
4204 break;
4205 }
4206 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4207 }
4208 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4209 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4210 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4211 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4212 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4213 ioc->name);
4214 }
4215
4216 /* Disable Diagnostic Mode
4217 */
4218 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4219
4220 /* Check FW reload status flags.
4221 */
4222 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4223 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4224 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4225 ioc->name, diag0val);
4226 return -3;
4227 }
4228
4229 if (ioc->debug_level & MPT_DEBUG) {
4230 if (ioc->alt_ioc)
4231 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4232 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4233 ioc->name, diag0val, diag1val));
4234 }
4235
4236 /*
4237 * Reset flag that says we've enabled event notification
4238 */
4239 ioc->facts.EventState = 0;
4240
4241 if (ioc->alt_ioc)
4242 ioc->alt_ioc->facts.EventState = 0;
4243
4244 return hard_reset_done;
4245 }
4246
4247 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4248 /**
4249 * SendIocReset - Send IOCReset request to MPT adapter.
4250 * @ioc: Pointer to MPT_ADAPTER structure
4251 * @reset_type: reset type, expected values are
4252 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4253 * @sleepFlag: Specifies whether the process can sleep
4254 *
4255 * Send IOCReset request to the MPT adapter.
4256 *
4257 * Returns 0 for success, non-zero for failure.
4258 */
4259 static int
SendIocReset(MPT_ADAPTER * ioc,u8 reset_type,int sleepFlag)4260 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4261 {
4262 int r;
4263 u32 state;
4264 int cntdn, count;
4265
4266 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4267 ioc->name, reset_type));
4268 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4269 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4270 return r;
4271
4272 /* FW ACK'd request, wait for READY state
4273 */
4274 count = 0;
4275 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4276
4277 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4278 cntdn--;
4279 count++;
4280 if (!cntdn) {
4281 if (sleepFlag != CAN_SLEEP)
4282 count *= 10;
4283
4284 printk(MYIOC_s_ERR_FMT
4285 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4286 ioc->name, state, (int)((count+5)/HZ));
4287 return -ETIME;
4288 }
4289
4290 if (sleepFlag == CAN_SLEEP) {
4291 msleep(1);
4292 } else {
4293 mdelay (1); /* 1 msec delay */
4294 }
4295 }
4296
4297 /* TODO!
4298 * Cleanup all event stuff for this IOC; re-issue EventNotification
4299 * request if needed.
4300 */
4301 if (ioc->facts.Function)
4302 ioc->facts.EventState = 0;
4303
4304 return 0;
4305 }
4306
4307 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4308 /**
4309 * initChainBuffers - Allocate memory for and initialize chain buffers
4310 * @ioc: Pointer to MPT_ADAPTER structure
4311 *
4312 * Allocates memory for and initializes chain buffers,
4313 * chain buffer control arrays and spinlock.
4314 */
4315 static int
initChainBuffers(MPT_ADAPTER * ioc)4316 initChainBuffers(MPT_ADAPTER *ioc)
4317 {
4318 u8 *mem;
4319 int sz, ii, num_chain;
4320 int scale, num_sge, numSGE;
4321
4322 /* ReqToChain size must equal the req_depth
4323 * index = req_idx
4324 */
4325 if (ioc->ReqToChain == NULL) {
4326 sz = ioc->req_depth * sizeof(int);
4327 mem = kmalloc(sz, GFP_ATOMIC);
4328 if (mem == NULL)
4329 return -1;
4330
4331 ioc->ReqToChain = (int *) mem;
4332 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4333 ioc->name, mem, sz));
4334 mem = kmalloc(sz, GFP_ATOMIC);
4335 if (mem == NULL)
4336 return -1;
4337
4338 ioc->RequestNB = (int *) mem;
4339 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4340 ioc->name, mem, sz));
4341 }
4342 for (ii = 0; ii < ioc->req_depth; ii++) {
4343 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4344 }
4345
4346 /* ChainToChain size must equal the total number
4347 * of chain buffers to be allocated.
4348 * index = chain_idx
4349 *
4350 * Calculate the number of chain buffers needed(plus 1) per I/O
4351 * then multiply the maximum number of simultaneous cmds
4352 *
4353 * num_sge = num sge in request frame + last chain buffer
4354 * scale = num sge per chain buffer if no chain element
4355 */
4356 scale = ioc->req_sz / ioc->SGE_size;
4357 if (ioc->sg_addr_size == sizeof(u64))
4358 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4359 else
4360 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4361
4362 if (ioc->sg_addr_size == sizeof(u64)) {
4363 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4364 (ioc->req_sz - 60) / ioc->SGE_size;
4365 } else {
4366 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4367 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4368 }
4369 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4370 ioc->name, num_sge, numSGE));
4371
4372 if (ioc->bus_type == FC) {
4373 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4374 numSGE = MPT_SCSI_FC_SG_DEPTH;
4375 } else {
4376 if (numSGE > MPT_SCSI_SG_DEPTH)
4377 numSGE = MPT_SCSI_SG_DEPTH;
4378 }
4379
4380 num_chain = 1;
4381 while (numSGE - num_sge > 0) {
4382 num_chain++;
4383 num_sge += (scale - 1);
4384 }
4385 num_chain++;
4386
4387 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4388 ioc->name, numSGE, num_sge, num_chain));
4389
4390 if (ioc->bus_type == SPI)
4391 num_chain *= MPT_SCSI_CAN_QUEUE;
4392 else if (ioc->bus_type == SAS)
4393 num_chain *= MPT_SAS_CAN_QUEUE;
4394 else
4395 num_chain *= MPT_FC_CAN_QUEUE;
4396
4397 ioc->num_chain = num_chain;
4398
4399 sz = num_chain * sizeof(int);
4400 if (ioc->ChainToChain == NULL) {
4401 mem = kmalloc(sz, GFP_ATOMIC);
4402 if (mem == NULL)
4403 return -1;
4404
4405 ioc->ChainToChain = (int *) mem;
4406 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4407 ioc->name, mem, sz));
4408 } else {
4409 mem = (u8 *) ioc->ChainToChain;
4410 }
4411 memset(mem, 0xFF, sz);
4412 return num_chain;
4413 }
4414
4415 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4416 /**
4417 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4418 * @ioc: Pointer to MPT_ADAPTER structure
4419 *
4420 * This routine allocates memory for the MPT reply and request frame
4421 * pools (if necessary), and primes the IOC reply FIFO with
4422 * reply frames.
4423 *
4424 * Returns 0 for success, non-zero for failure.
4425 */
4426 static int
PrimeIocFifos(MPT_ADAPTER * ioc)4427 PrimeIocFifos(MPT_ADAPTER *ioc)
4428 {
4429 MPT_FRAME_HDR *mf;
4430 unsigned long flags;
4431 dma_addr_t alloc_dma;
4432 u8 *mem;
4433 int i, reply_sz, sz, total_size, num_chain;
4434 u64 dma_mask;
4435
4436 dma_mask = 0;
4437
4438 /* Prime reply FIFO... */
4439
4440 if (ioc->reply_frames == NULL) {
4441 if ( (num_chain = initChainBuffers(ioc)) < 0)
4442 return -1;
4443 /*
4444 * 1078 errata workaround for the 36GB limitation
4445 */
4446 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4447 ioc->dma_mask > DMA_BIT_MASK(35)) {
4448 if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))
4449 && !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) {
4450 dma_mask = DMA_BIT_MASK(35);
4451 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4452 "setting 35 bit addressing for "
4453 "Request/Reply/Chain and Sense Buffers\n",
4454 ioc->name));
4455 } else {
4456 /*Reseting DMA mask to 64 bit*/
4457 dma_set_mask(&ioc->pcidev->dev,
4458 DMA_BIT_MASK(64));
4459 dma_set_coherent_mask(&ioc->pcidev->dev,
4460 DMA_BIT_MASK(64));
4461
4462 printk(MYIOC_s_ERR_FMT
4463 "failed setting 35 bit addressing for "
4464 "Request/Reply/Chain and Sense Buffers\n",
4465 ioc->name);
4466 return -1;
4467 }
4468 }
4469
4470 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4471 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4472 ioc->name, ioc->reply_sz, ioc->reply_depth));
4473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4474 ioc->name, reply_sz, reply_sz));
4475
4476 sz = (ioc->req_sz * ioc->req_depth);
4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4478 ioc->name, ioc->req_sz, ioc->req_depth));
4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4480 ioc->name, sz, sz));
4481 total_size += sz;
4482
4483 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4484 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4485 ioc->name, ioc->req_sz, num_chain));
4486 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4487 ioc->name, sz, sz, num_chain));
4488
4489 total_size += sz;
4490 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size,
4491 &alloc_dma, GFP_KERNEL);
4492 if (mem == NULL) {
4493 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4494 ioc->name);
4495 goto out_fail;
4496 }
4497
4498 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4499 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4500
4501 memset(mem, 0, total_size);
4502 ioc->alloc_total += total_size;
4503 ioc->alloc = mem;
4504 ioc->alloc_dma = alloc_dma;
4505 ioc->alloc_sz = total_size;
4506 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4507 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4508
4509 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4510 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4511
4512 alloc_dma += reply_sz;
4513 mem += reply_sz;
4514
4515 /* Request FIFO - WE manage this! */
4516
4517 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4518 ioc->req_frames_dma = alloc_dma;
4519
4520 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4521 ioc->name, mem, (void *)(ulong)alloc_dma));
4522
4523 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4524
4525 for (i = 0; i < ioc->req_depth; i++) {
4526 alloc_dma += ioc->req_sz;
4527 mem += ioc->req_sz;
4528 }
4529
4530 ioc->ChainBuffer = mem;
4531 ioc->ChainBufferDMA = alloc_dma;
4532
4533 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4534 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4535
4536 /* Initialize the free chain Q.
4537 */
4538
4539 INIT_LIST_HEAD(&ioc->FreeChainQ);
4540
4541 /* Post the chain buffers to the FreeChainQ.
4542 */
4543 mem = (u8 *)ioc->ChainBuffer;
4544 for (i=0; i < num_chain; i++) {
4545 mf = (MPT_FRAME_HDR *) mem;
4546 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4547 mem += ioc->req_sz;
4548 }
4549
4550 /* Initialize Request frames linked list
4551 */
4552 alloc_dma = ioc->req_frames_dma;
4553 mem = (u8 *) ioc->req_frames;
4554
4555 spin_lock_irqsave(&ioc->FreeQlock, flags);
4556 INIT_LIST_HEAD(&ioc->FreeQ);
4557 for (i = 0; i < ioc->req_depth; i++) {
4558 mf = (MPT_FRAME_HDR *) mem;
4559
4560 /* Queue REQUESTs *internally*! */
4561 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4562
4563 mem += ioc->req_sz;
4564 }
4565 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4566
4567 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4568 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz,
4569 &ioc->sense_buf_pool_dma, GFP_KERNEL);
4570 if (ioc->sense_buf_pool == NULL) {
4571 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4572 ioc->name);
4573 goto out_fail;
4574 }
4575
4576 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4577 ioc->alloc_total += sz;
4578 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4579 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4580
4581 }
4582
4583 /* Post Reply frames to FIFO
4584 */
4585 alloc_dma = ioc->alloc_dma;
4586 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4587 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4588
4589 for (i = 0; i < ioc->reply_depth; i++) {
4590 /* Write each address to the IOC! */
4591 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4592 alloc_dma += ioc->reply_sz;
4593 }
4594
4595 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev,
4596 ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev,
4597 ioc->dma_mask))
4598 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4599 "restoring 64 bit addressing\n", ioc->name));
4600
4601 return 0;
4602
4603 out_fail:
4604
4605 if (ioc->alloc != NULL) {
4606 sz = ioc->alloc_sz;
4607 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
4608 ioc->alloc_dma);
4609 ioc->reply_frames = NULL;
4610 ioc->req_frames = NULL;
4611 ioc->alloc_total -= sz;
4612 }
4613 if (ioc->sense_buf_pool != NULL) {
4614 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4615 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
4616 ioc->sense_buf_pool_dma);
4617 ioc->sense_buf_pool = NULL;
4618 }
4619
4620 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev,
4621 DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev,
4622 DMA_BIT_MASK(64)))
4623 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4624 "restoring 64 bit addressing\n", ioc->name));
4625
4626 return -1;
4627 }
4628
4629 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4630 /**
4631 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4632 * from IOC via doorbell handshake method.
4633 * @ioc: Pointer to MPT_ADAPTER structure
4634 * @reqBytes: Size of the request in bytes
4635 * @req: Pointer to MPT request frame
4636 * @replyBytes: Expected size of the reply in bytes
4637 * @u16reply: Pointer to area where reply should be written
4638 * @maxwait: Max wait time for a reply (in seconds)
4639 * @sleepFlag: Specifies whether the process can sleep
4640 *
4641 * NOTES: It is the callers responsibility to byte-swap fields in the
4642 * request which are greater than 1 byte in size. It is also the
4643 * callers responsibility to byte-swap response fields which are
4644 * greater than 1 byte in size.
4645 *
4646 * Returns 0 for success, non-zero for failure.
4647 */
4648 static int
mpt_handshake_req_reply_wait(MPT_ADAPTER * ioc,int reqBytes,u32 * req,int replyBytes,u16 * u16reply,int maxwait,int sleepFlag)4649 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4650 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4651 {
4652 MPIDefaultReply_t *mptReply;
4653 int failcnt = 0;
4654 int t;
4655
4656 /*
4657 * Get ready to cache a handshake reply
4658 */
4659 ioc->hs_reply_idx = 0;
4660 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4661 mptReply->MsgLength = 0;
4662
4663 /*
4664 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4665 * then tell IOC that we want to handshake a request of N words.
4666 * (WRITE u32val to Doorbell reg).
4667 */
4668 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4669 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4670 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4671 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4672
4673 /*
4674 * Wait for IOC's doorbell handshake int
4675 */
4676 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4677 failcnt++;
4678
4679 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4680 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4681
4682 /* Read doorbell and check for active bit */
4683 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4684 return -1;
4685
4686 /*
4687 * Clear doorbell int (WRITE 0 to IntStatus reg),
4688 * then wait for IOC to ACKnowledge that it's ready for
4689 * our handshake request.
4690 */
4691 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4692 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4693 failcnt++;
4694
4695 if (!failcnt) {
4696 int ii;
4697 u8 *req_as_bytes = (u8 *) req;
4698
4699 /*
4700 * Stuff request words via doorbell handshake,
4701 * with ACK from IOC for each.
4702 */
4703 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4704 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4705 (req_as_bytes[(ii*4) + 1] << 8) |
4706 (req_as_bytes[(ii*4) + 2] << 16) |
4707 (req_as_bytes[(ii*4) + 3] << 24));
4708
4709 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4710 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4711 failcnt++;
4712 }
4713
4714 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4715 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4716
4717 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4718 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4719
4720 /*
4721 * Wait for completion of doorbell handshake reply from the IOC
4722 */
4723 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4724 failcnt++;
4725
4726 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4727 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4728
4729 /*
4730 * Copy out the cached reply...
4731 */
4732 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4733 u16reply[ii] = ioc->hs_reply[ii];
4734 } else {
4735 return -99;
4736 }
4737
4738 return -failcnt;
4739 }
4740
4741 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4742 /**
4743 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4744 * @ioc: Pointer to MPT_ADAPTER structure
4745 * @howlong: How long to wait (in seconds)
4746 * @sleepFlag: Specifies whether the process can sleep
4747 *
4748 * This routine waits (up to ~2 seconds max) for IOC doorbell
4749 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4750 * bit in its IntStatus register being clear.
4751 *
4752 * Returns a negative value on failure, else wait loop count.
4753 */
4754 static int
WaitForDoorbellAck(MPT_ADAPTER * ioc,int howlong,int sleepFlag)4755 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4756 {
4757 int cntdn;
4758 int count = 0;
4759 u32 intstat=0;
4760
4761 cntdn = 1000 * howlong;
4762
4763 if (sleepFlag == CAN_SLEEP) {
4764 while (--cntdn) {
4765 msleep (1);
4766 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4767 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4768 break;
4769 count++;
4770 }
4771 } else {
4772 while (--cntdn) {
4773 udelay (1000);
4774 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4775 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4776 break;
4777 count++;
4778 }
4779 }
4780
4781 if (cntdn) {
4782 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4783 ioc->name, count));
4784 return count;
4785 }
4786
4787 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4788 ioc->name, count, intstat);
4789 return -1;
4790 }
4791
4792 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4793 /**
4794 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4795 * @ioc: Pointer to MPT_ADAPTER structure
4796 * @howlong: How long to wait (in seconds)
4797 * @sleepFlag: Specifies whether the process can sleep
4798 *
4799 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4800 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4801 *
4802 * Returns a negative value on failure, else wait loop count.
4803 */
4804 static int
WaitForDoorbellInt(MPT_ADAPTER * ioc,int howlong,int sleepFlag)4805 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4806 {
4807 int cntdn;
4808 int count = 0;
4809 u32 intstat=0;
4810
4811 cntdn = 1000 * howlong;
4812 if (sleepFlag == CAN_SLEEP) {
4813 while (--cntdn) {
4814 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4815 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4816 break;
4817 msleep(1);
4818 count++;
4819 }
4820 } else {
4821 while (--cntdn) {
4822 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4823 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4824 break;
4825 udelay (1000);
4826 count++;
4827 }
4828 }
4829
4830 if (cntdn) {
4831 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4832 ioc->name, count, howlong));
4833 return count;
4834 }
4835
4836 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4837 ioc->name, count, intstat);
4838 return -1;
4839 }
4840
4841 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4842 /**
4843 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4844 * @ioc: Pointer to MPT_ADAPTER structure
4845 * @howlong: How long to wait (in seconds)
4846 * @sleepFlag: Specifies whether the process can sleep
4847 *
4848 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4849 * Reply is cached to IOC private area large enough to hold a maximum
4850 * of 128 bytes of reply data.
4851 *
4852 * Returns a negative value on failure, else size of reply in WORDS.
4853 */
4854 static int
WaitForDoorbellReply(MPT_ADAPTER * ioc,int howlong,int sleepFlag)4855 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4856 {
4857 int u16cnt = 0;
4858 int failcnt = 0;
4859 int t;
4860 u16 *hs_reply = ioc->hs_reply;
4861 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4862 u16 hword;
4863
4864 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4865
4866 /*
4867 * Get first two u16's so we can look at IOC's intended reply MsgLength
4868 */
4869 u16cnt=0;
4870 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4871 failcnt++;
4872 } else {
4873 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4874 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4875 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4876 failcnt++;
4877 else {
4878 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4879 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4880 }
4881 }
4882
4883 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4884 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4885 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4886
4887 /*
4888 * If no error (and IOC said MsgLength is > 0), piece together
4889 * reply 16 bits at a time.
4890 */
4891 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4892 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4893 failcnt++;
4894 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4895 /* don't overflow our IOC hs_reply[] buffer! */
4896 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4897 hs_reply[u16cnt] = hword;
4898 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4899 }
4900
4901 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4902 failcnt++;
4903 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4904
4905 if (failcnt) {
4906 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4907 ioc->name);
4908 return -failcnt;
4909 }
4910 #if 0
4911 else if (u16cnt != (2 * mptReply->MsgLength)) {
4912 return -101;
4913 }
4914 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4915 return -102;
4916 }
4917 #endif
4918
4919 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4920 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4921
4922 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4923 ioc->name, t, u16cnt/2));
4924 return u16cnt/2;
4925 }
4926
4927 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4928 /**
4929 * GetLanConfigPages - Fetch LANConfig pages.
4930 * @ioc: Pointer to MPT_ADAPTER structure
4931 *
4932 * Return: 0 for success
4933 * -ENOMEM if no memory available
4934 * -EPERM if not allowed due to ISR context
4935 * -EAGAIN if no msg frames currently available
4936 * -EFAULT for non-successful reply or no reply (timeout)
4937 */
4938 static int
GetLanConfigPages(MPT_ADAPTER * ioc)4939 GetLanConfigPages(MPT_ADAPTER *ioc)
4940 {
4941 ConfigPageHeader_t hdr;
4942 CONFIGPARMS cfg;
4943 LANPage0_t *ppage0_alloc;
4944 dma_addr_t page0_dma;
4945 LANPage1_t *ppage1_alloc;
4946 dma_addr_t page1_dma;
4947 int rc = 0;
4948 int data_sz;
4949 int copy_sz;
4950
4951 /* Get LAN Page 0 header */
4952 hdr.PageVersion = 0;
4953 hdr.PageLength = 0;
4954 hdr.PageNumber = 0;
4955 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4956 cfg.cfghdr.hdr = &hdr;
4957 cfg.physAddr = -1;
4958 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4959 cfg.dir = 0;
4960 cfg.pageAddr = 0;
4961 cfg.timeout = 0;
4962
4963 if ((rc = mpt_config(ioc, &cfg)) != 0)
4964 return rc;
4965
4966 if (hdr.PageLength > 0) {
4967 data_sz = hdr.PageLength * 4;
4968 ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
4969 &page0_dma, GFP_KERNEL);
4970 rc = -ENOMEM;
4971 if (ppage0_alloc) {
4972 memset((u8 *)ppage0_alloc, 0, data_sz);
4973 cfg.physAddr = page0_dma;
4974 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4975
4976 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4977 /* save the data */
4978 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4979 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4980
4981 }
4982
4983 dma_free_coherent(&ioc->pcidev->dev, data_sz,
4984 (u8 *)ppage0_alloc, page0_dma);
4985
4986 /* FIXME!
4987 * Normalize endianness of structure data,
4988 * by byte-swapping all > 1 byte fields!
4989 */
4990
4991 }
4992
4993 if (rc)
4994 return rc;
4995 }
4996
4997 /* Get LAN Page 1 header */
4998 hdr.PageVersion = 0;
4999 hdr.PageLength = 0;
5000 hdr.PageNumber = 1;
5001 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5002 cfg.cfghdr.hdr = &hdr;
5003 cfg.physAddr = -1;
5004 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5005 cfg.dir = 0;
5006 cfg.pageAddr = 0;
5007
5008 if ((rc = mpt_config(ioc, &cfg)) != 0)
5009 return rc;
5010
5011 if (hdr.PageLength == 0)
5012 return 0;
5013
5014 data_sz = hdr.PageLength * 4;
5015 rc = -ENOMEM;
5016 ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
5017 &page1_dma, GFP_KERNEL);
5018 if (ppage1_alloc) {
5019 memset((u8 *)ppage1_alloc, 0, data_sz);
5020 cfg.physAddr = page1_dma;
5021 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5022
5023 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5024 /* save the data */
5025 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5026 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5027 }
5028
5029 dma_free_coherent(&ioc->pcidev->dev, data_sz,
5030 (u8 *)ppage1_alloc, page1_dma);
5031
5032 /* FIXME!
5033 * Normalize endianness of structure data,
5034 * by byte-swapping all > 1 byte fields!
5035 */
5036
5037 }
5038
5039 return rc;
5040 }
5041
5042 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5043 /**
5044 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5045 * @ioc: Pointer to MPT_ADAPTER structure
5046 * @persist_opcode: see below
5047 *
5048 * =============================== ======================================
5049 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for
5050 * devices not currently present.
5051 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings
5052 * =============================== ======================================
5053 *
5054 * NOTE: Don't use not this function during interrupt time.
5055 *
5056 * Returns 0 for success, non-zero error
5057 */
5058
5059 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5060 int
mptbase_sas_persist_operation(MPT_ADAPTER * ioc,u8 persist_opcode)5061 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5062 {
5063 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5064 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5065 MPT_FRAME_HDR *mf = NULL;
5066 MPIHeader_t *mpi_hdr;
5067 int ret = 0;
5068 unsigned long timeleft;
5069
5070 mutex_lock(&ioc->mptbase_cmds.mutex);
5071
5072 /* init the internal cmd struct */
5073 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5074 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5075
5076 /* insure garbage is not sent to fw */
5077 switch(persist_opcode) {
5078
5079 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5080 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5081 break;
5082
5083 default:
5084 ret = -1;
5085 goto out;
5086 }
5087
5088 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5089 __func__, persist_opcode);
5090
5091 /* Get a MF for this command.
5092 */
5093 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5094 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5095 ret = -1;
5096 goto out;
5097 }
5098
5099 mpi_hdr = (MPIHeader_t *) mf;
5100 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5101 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5102 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5103 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5104 sasIoUnitCntrReq->Operation = persist_opcode;
5105
5106 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5107 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5108 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5109 ret = -ETIME;
5110 printk(KERN_DEBUG "%s: failed\n", __func__);
5111 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5112 goto out;
5113 if (!timeleft) {
5114 printk(MYIOC_s_WARN_FMT
5115 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5116 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5117 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5118 mpt_free_msg_frame(ioc, mf);
5119 }
5120 goto out;
5121 }
5122
5123 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5124 ret = -1;
5125 goto out;
5126 }
5127
5128 sasIoUnitCntrReply =
5129 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5130 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5131 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5132 __func__, sasIoUnitCntrReply->IOCStatus,
5133 sasIoUnitCntrReply->IOCLogInfo);
5134 printk(KERN_DEBUG "%s: failed\n", __func__);
5135 ret = -1;
5136 } else
5137 printk(KERN_DEBUG "%s: success\n", __func__);
5138 out:
5139
5140 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5141 mutex_unlock(&ioc->mptbase_cmds.mutex);
5142 return ret;
5143 }
5144
5145 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5146
5147 static void
mptbase_raid_process_event_data(MPT_ADAPTER * ioc,MpiEventDataRaid_t * pRaidEventData)5148 mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5149 MpiEventDataRaid_t * pRaidEventData)
5150 {
5151 int volume;
5152 int reason;
5153 int disk;
5154 int status;
5155 int flags;
5156 int state;
5157
5158 volume = pRaidEventData->VolumeID;
5159 reason = pRaidEventData->ReasonCode;
5160 disk = pRaidEventData->PhysDiskNum;
5161 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5162 flags = (status >> 0) & 0xff;
5163 state = (status >> 8) & 0xff;
5164
5165 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5166 return;
5167 }
5168
5169 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5170 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5171 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5172 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5173 ioc->name, disk, volume);
5174 } else {
5175 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5176 ioc->name, volume);
5177 }
5178
5179 switch(reason) {
5180 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5181 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5182 ioc->name);
5183 break;
5184
5185 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5186
5187 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5188 ioc->name);
5189 break;
5190
5191 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5192 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5193 ioc->name);
5194 break;
5195
5196 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5197 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5198 ioc->name,
5199 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5200 ? "optimal"
5201 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5202 ? "degraded"
5203 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5204 ? "failed"
5205 : "state unknown",
5206 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5207 ? ", enabled" : "",
5208 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5209 ? ", quiesced" : "",
5210 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5211 ? ", resync in progress" : "" );
5212 break;
5213
5214 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5215 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5216 ioc->name, disk);
5217 break;
5218
5219 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5220 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5221 ioc->name);
5222 break;
5223
5224 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5225 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5226 ioc->name);
5227 break;
5228
5229 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5230 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5231 ioc->name);
5232 break;
5233
5234 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5235 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5236 ioc->name,
5237 state == MPI_PHYSDISK0_STATUS_ONLINE
5238 ? "online"
5239 : state == MPI_PHYSDISK0_STATUS_MISSING
5240 ? "missing"
5241 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5242 ? "not compatible"
5243 : state == MPI_PHYSDISK0_STATUS_FAILED
5244 ? "failed"
5245 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5246 ? "initializing"
5247 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5248 ? "offline requested"
5249 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5250 ? "failed requested"
5251 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5252 ? "offline"
5253 : "state unknown",
5254 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5255 ? ", out of sync" : "",
5256 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5257 ? ", quiesced" : "" );
5258 break;
5259
5260 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5261 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5262 ioc->name, disk);
5263 break;
5264
5265 case MPI_EVENT_RAID_RC_SMART_DATA:
5266 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5267 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5268 break;
5269
5270 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5271 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5272 ioc->name, disk);
5273 break;
5274 }
5275 }
5276
5277 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5278 /**
5279 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5280 * @ioc: Pointer to MPT_ADAPTER structure
5281 *
5282 * Returns: 0 for success
5283 * -ENOMEM if no memory available
5284 * -EPERM if not allowed due to ISR context
5285 * -EAGAIN if no msg frames currently available
5286 * -EFAULT for non-successful reply or no reply (timeout)
5287 */
5288 static int
GetIoUnitPage2(MPT_ADAPTER * ioc)5289 GetIoUnitPage2(MPT_ADAPTER *ioc)
5290 {
5291 ConfigPageHeader_t hdr;
5292 CONFIGPARMS cfg;
5293 IOUnitPage2_t *ppage_alloc;
5294 dma_addr_t page_dma;
5295 int data_sz;
5296 int rc;
5297
5298 /* Get the page header */
5299 hdr.PageVersion = 0;
5300 hdr.PageLength = 0;
5301 hdr.PageNumber = 2;
5302 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5303 cfg.cfghdr.hdr = &hdr;
5304 cfg.physAddr = -1;
5305 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5306 cfg.dir = 0;
5307 cfg.pageAddr = 0;
5308 cfg.timeout = 0;
5309
5310 if ((rc = mpt_config(ioc, &cfg)) != 0)
5311 return rc;
5312
5313 if (hdr.PageLength == 0)
5314 return 0;
5315
5316 /* Read the config page */
5317 data_sz = hdr.PageLength * 4;
5318 rc = -ENOMEM;
5319 ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
5320 &page_dma, GFP_KERNEL);
5321 if (ppage_alloc) {
5322 memset((u8 *)ppage_alloc, 0, data_sz);
5323 cfg.physAddr = page_dma;
5324 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5325
5326 /* If Good, save data */
5327 if ((rc = mpt_config(ioc, &cfg)) == 0)
5328 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5329
5330 dma_free_coherent(&ioc->pcidev->dev, data_sz,
5331 (u8 *)ppage_alloc, page_dma);
5332 }
5333
5334 return rc;
5335 }
5336
5337 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5338 /**
5339 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5340 * @ioc: Pointer to a Adapter Strucutre
5341 * @portnum: IOC port number
5342 *
5343 * Return: -EFAULT if read of config page header fails
5344 * or if no nvram
5345 * If read of SCSI Port Page 0 fails,
5346 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5347 * Adapter settings: async, narrow
5348 * Return 1
5349 * If read of SCSI Port Page 2 fails,
5350 * Adapter settings valid
5351 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5352 * Return 1
5353 * Else
5354 * Both valid
5355 * Return 0
5356 * CHECK - what type of locking mechanisms should be used????
5357 */
5358 static int
mpt_GetScsiPortSettings(MPT_ADAPTER * ioc,int portnum)5359 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5360 {
5361 u8 *pbuf;
5362 dma_addr_t buf_dma;
5363 CONFIGPARMS cfg;
5364 ConfigPageHeader_t header;
5365 int ii;
5366 int data, rc = 0;
5367
5368 /* Allocate memory
5369 */
5370 if (!ioc->spi_data.nvram) {
5371 int sz;
5372 u8 *mem;
5373 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5374 mem = kmalloc(sz, GFP_ATOMIC);
5375 if (mem == NULL)
5376 return -EFAULT;
5377
5378 ioc->spi_data.nvram = (int *) mem;
5379
5380 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5381 ioc->name, ioc->spi_data.nvram, sz));
5382 }
5383
5384 /* Invalidate NVRAM information
5385 */
5386 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5387 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5388 }
5389
5390 /* Read SPP0 header, allocate memory, then read page.
5391 */
5392 header.PageVersion = 0;
5393 header.PageLength = 0;
5394 header.PageNumber = 0;
5395 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5396 cfg.cfghdr.hdr = &header;
5397 cfg.physAddr = -1;
5398 cfg.pageAddr = portnum;
5399 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5400 cfg.dir = 0;
5401 cfg.timeout = 0; /* use default */
5402 if (mpt_config(ioc, &cfg) != 0)
5403 return -EFAULT;
5404
5405 if (header.PageLength > 0) {
5406 pbuf = dma_alloc_coherent(&ioc->pcidev->dev,
5407 header.PageLength * 4, &buf_dma,
5408 GFP_KERNEL);
5409 if (pbuf) {
5410 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5411 cfg.physAddr = buf_dma;
5412 if (mpt_config(ioc, &cfg) != 0) {
5413 ioc->spi_data.maxBusWidth = MPT_NARROW;
5414 ioc->spi_data.maxSyncOffset = 0;
5415 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5416 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5417 rc = 1;
5418 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5419 "Unable to read PortPage0 minSyncFactor=%x\n",
5420 ioc->name, ioc->spi_data.minSyncFactor));
5421 } else {
5422 /* Save the Port Page 0 data
5423 */
5424 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5425 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5426 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5427
5428 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5429 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5430 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5431 "noQas due to Capabilities=%x\n",
5432 ioc->name, pPP0->Capabilities));
5433 }
5434 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5436 if (data) {
5437 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5438 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5439 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5440 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5441 "PortPage0 minSyncFactor=%x\n",
5442 ioc->name, ioc->spi_data.minSyncFactor));
5443 } else {
5444 ioc->spi_data.maxSyncOffset = 0;
5445 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5446 }
5447
5448 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5449
5450 /* Update the minSyncFactor based on bus type.
5451 */
5452 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5453 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5454
5455 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5456 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5457 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5458 "HVD or SE detected, minSyncFactor=%x\n",
5459 ioc->name, ioc->spi_data.minSyncFactor));
5460 }
5461 }
5462 }
5463 if (pbuf) {
5464 dma_free_coherent(&ioc->pcidev->dev,
5465 header.PageLength * 4, pbuf,
5466 buf_dma);
5467 }
5468 }
5469 }
5470
5471 /* SCSI Port Page 2 - Read the header then the page.
5472 */
5473 header.PageVersion = 0;
5474 header.PageLength = 0;
5475 header.PageNumber = 2;
5476 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5477 cfg.cfghdr.hdr = &header;
5478 cfg.physAddr = -1;
5479 cfg.pageAddr = portnum;
5480 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5481 cfg.dir = 0;
5482 if (mpt_config(ioc, &cfg) != 0)
5483 return -EFAULT;
5484
5485 if (header.PageLength > 0) {
5486 /* Allocate memory and read SCSI Port Page 2
5487 */
5488 pbuf = dma_alloc_coherent(&ioc->pcidev->dev,
5489 header.PageLength * 4, &buf_dma,
5490 GFP_KERNEL);
5491 if (pbuf) {
5492 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5493 cfg.physAddr = buf_dma;
5494 if (mpt_config(ioc, &cfg) != 0) {
5495 /* Nvram data is left with INVALID mark
5496 */
5497 rc = 1;
5498 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5499
5500 /* This is an ATTO adapter, read Page2 accordingly
5501 */
5502 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5503 ATTODeviceInfo_t *pdevice = NULL;
5504 u16 ATTOFlags;
5505
5506 /* Save the Port Page 2 data
5507 * (reformat into a 32bit quantity)
5508 */
5509 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5510 pdevice = &pPP2->DeviceSettings[ii];
5511 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5512 data = 0;
5513
5514 /* Translate ATTO device flags to LSI format
5515 */
5516 if (ATTOFlags & ATTOFLAG_DISC)
5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5518 if (ATTOFlags & ATTOFLAG_ID_ENB)
5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5520 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5522 if (ATTOFlags & ATTOFLAG_TAGGED)
5523 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5524 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5525 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5526
5527 data = (data << 16) | (pdevice->Period << 8) | 10;
5528 ioc->spi_data.nvram[ii] = data;
5529 }
5530 } else {
5531 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5532 MpiDeviceInfo_t *pdevice = NULL;
5533
5534 /*
5535 * Save "Set to Avoid SCSI Bus Resets" flag
5536 */
5537 ioc->spi_data.bus_reset =
5538 (le32_to_cpu(pPP2->PortFlags) &
5539 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5540 0 : 1 ;
5541
5542 /* Save the Port Page 2 data
5543 * (reformat into a 32bit quantity)
5544 */
5545 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5546 ioc->spi_data.PortFlags = data;
5547 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5548 pdevice = &pPP2->DeviceSettings[ii];
5549 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5550 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5551 ioc->spi_data.nvram[ii] = data;
5552 }
5553 }
5554
5555 dma_free_coherent(&ioc->pcidev->dev,
5556 header.PageLength * 4, pbuf,
5557 buf_dma);
5558 }
5559 }
5560
5561 /* Update Adapter limits with those from NVRAM
5562 * Comment: Don't need to do this. Target performance
5563 * parameters will never exceed the adapters limits.
5564 */
5565
5566 return rc;
5567 }
5568
5569 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5570 /**
5571 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5572 * @ioc: Pointer to a Adapter Strucutre
5573 * @portnum: IOC port number
5574 *
5575 * Return: -EFAULT if read of config page header fails
5576 * or 0 if success.
5577 */
5578 static int
mpt_readScsiDevicePageHeaders(MPT_ADAPTER * ioc,int portnum)5579 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5580 {
5581 CONFIGPARMS cfg;
5582 ConfigPageHeader_t header;
5583
5584 /* Read the SCSI Device Page 1 header
5585 */
5586 header.PageVersion = 0;
5587 header.PageLength = 0;
5588 header.PageNumber = 1;
5589 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5590 cfg.cfghdr.hdr = &header;
5591 cfg.physAddr = -1;
5592 cfg.pageAddr = portnum;
5593 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5594 cfg.dir = 0;
5595 cfg.timeout = 0;
5596 if (mpt_config(ioc, &cfg) != 0)
5597 return -EFAULT;
5598
5599 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5600 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5601
5602 header.PageVersion = 0;
5603 header.PageLength = 0;
5604 header.PageNumber = 0;
5605 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5606 if (mpt_config(ioc, &cfg) != 0)
5607 return -EFAULT;
5608
5609 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5610 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5611
5612 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5613 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5614
5615 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5616 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5617 return 0;
5618 }
5619
5620 /**
5621 * mpt_inactive_raid_list_free - This clears this link list.
5622 * @ioc : pointer to per adapter structure
5623 **/
5624 static void
mpt_inactive_raid_list_free(MPT_ADAPTER * ioc)5625 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5626 {
5627 struct inactive_raid_component_info *component_info, *pNext;
5628
5629 if (list_empty(&ioc->raid_data.inactive_list))
5630 return;
5631
5632 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5633 list_for_each_entry_safe(component_info, pNext,
5634 &ioc->raid_data.inactive_list, list) {
5635 list_del(&component_info->list);
5636 kfree(component_info);
5637 }
5638 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5639 }
5640
5641 /**
5642 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5643 *
5644 * @ioc : pointer to per adapter structure
5645 * @channel : volume channel
5646 * @id : volume target id
5647 **/
5648 static void
mpt_inactive_raid_volumes(MPT_ADAPTER * ioc,u8 channel,u8 id)5649 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5650 {
5651 CONFIGPARMS cfg;
5652 ConfigPageHeader_t hdr;
5653 dma_addr_t dma_handle;
5654 pRaidVolumePage0_t buffer = NULL;
5655 int i;
5656 RaidPhysDiskPage0_t phys_disk;
5657 struct inactive_raid_component_info *component_info;
5658 int handle_inactive_volumes;
5659
5660 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5661 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5662 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5663 cfg.pageAddr = (channel << 8) + id;
5664 cfg.cfghdr.hdr = &hdr;
5665 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5666
5667 if (mpt_config(ioc, &cfg) != 0)
5668 goto out;
5669
5670 if (!hdr.PageLength)
5671 goto out;
5672
5673 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5674 &dma_handle, GFP_KERNEL);
5675
5676 if (!buffer)
5677 goto out;
5678
5679 cfg.physAddr = dma_handle;
5680 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5681
5682 if (mpt_config(ioc, &cfg) != 0)
5683 goto out;
5684
5685 if (!buffer->NumPhysDisks)
5686 goto out;
5687
5688 handle_inactive_volumes =
5689 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5690 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5691 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5692 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5693
5694 if (!handle_inactive_volumes)
5695 goto out;
5696
5697 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5698 for (i = 0; i < buffer->NumPhysDisks; i++) {
5699 if(mpt_raid_phys_disk_pg0(ioc,
5700 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5701 continue;
5702
5703 if ((component_info = kmalloc_obj(*component_info)) == NULL)
5704 continue;
5705
5706 component_info->volumeID = id;
5707 component_info->volumeBus = channel;
5708 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5709 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5710 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5711 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5712
5713 list_add_tail(&component_info->list,
5714 &ioc->raid_data.inactive_list);
5715 }
5716 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5717
5718 out:
5719 if (buffer)
5720 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5721 buffer, dma_handle);
5722 }
5723
5724 /**
5725 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5726 * @ioc: Pointer to a Adapter Structure
5727 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5728 * @phys_disk: requested payload data returned
5729 *
5730 * Return:
5731 * 0 on success
5732 * -EFAULT if read of config page header fails or data pointer not NULL
5733 * -ENOMEM if pci_alloc failed
5734 **/
5735 int
mpt_raid_phys_disk_pg0(MPT_ADAPTER * ioc,u8 phys_disk_num,RaidPhysDiskPage0_t * phys_disk)5736 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5737 RaidPhysDiskPage0_t *phys_disk)
5738 {
5739 CONFIGPARMS cfg;
5740 ConfigPageHeader_t hdr;
5741 dma_addr_t dma_handle;
5742 pRaidPhysDiskPage0_t buffer = NULL;
5743 int rc;
5744
5745 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5746 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5747 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5748
5749 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5750 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5751 cfg.cfghdr.hdr = &hdr;
5752 cfg.physAddr = -1;
5753 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5754
5755 if (mpt_config(ioc, &cfg) != 0) {
5756 rc = -EFAULT;
5757 goto out;
5758 }
5759
5760 if (!hdr.PageLength) {
5761 rc = -EFAULT;
5762 goto out;
5763 }
5764
5765 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5766 &dma_handle, GFP_KERNEL);
5767
5768 if (!buffer) {
5769 rc = -ENOMEM;
5770 goto out;
5771 }
5772
5773 cfg.physAddr = dma_handle;
5774 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5775 cfg.pageAddr = phys_disk_num;
5776
5777 if (mpt_config(ioc, &cfg) != 0) {
5778 rc = -EFAULT;
5779 goto out;
5780 }
5781
5782 rc = 0;
5783 memcpy(phys_disk, buffer, sizeof(*buffer));
5784 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5785
5786 out:
5787
5788 if (buffer)
5789 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5790 buffer, dma_handle);
5791
5792 return rc;
5793 }
5794
5795 /**
5796 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5797 * @ioc: Pointer to a Adapter Structure
5798 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5799 *
5800 * Return:
5801 * returns number paths
5802 **/
5803 int
mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER * ioc,u8 phys_disk_num)5804 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5805 {
5806 CONFIGPARMS cfg;
5807 ConfigPageHeader_t hdr;
5808 dma_addr_t dma_handle;
5809 pRaidPhysDiskPage1_t buffer = NULL;
5810 int rc;
5811
5812 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5813 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5814
5815 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5816 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5817 hdr.PageNumber = 1;
5818 cfg.cfghdr.hdr = &hdr;
5819 cfg.physAddr = -1;
5820 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5821
5822 if (mpt_config(ioc, &cfg) != 0) {
5823 rc = 0;
5824 goto out;
5825 }
5826
5827 if (!hdr.PageLength) {
5828 rc = 0;
5829 goto out;
5830 }
5831
5832 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5833 &dma_handle, GFP_KERNEL);
5834
5835 if (!buffer) {
5836 rc = 0;
5837 goto out;
5838 }
5839
5840 cfg.physAddr = dma_handle;
5841 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5842 cfg.pageAddr = phys_disk_num;
5843
5844 if (mpt_config(ioc, &cfg) != 0) {
5845 rc = 0;
5846 goto out;
5847 }
5848
5849 rc = buffer->NumPhysDiskPaths;
5850 out:
5851
5852 if (buffer)
5853 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5854 buffer, dma_handle);
5855
5856 return rc;
5857 }
5858 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5859
5860 /**
5861 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5862 * @ioc: Pointer to a Adapter Structure
5863 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5864 * @phys_disk: requested payload data returned
5865 *
5866 * Return:
5867 * 0 on success
5868 * -EFAULT if read of config page header fails or data pointer not NULL
5869 * -ENOMEM if pci_alloc failed
5870 **/
5871 int
mpt_raid_phys_disk_pg1(MPT_ADAPTER * ioc,u8 phys_disk_num,RaidPhysDiskPage1_t * phys_disk)5872 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5873 RaidPhysDiskPage1_t *phys_disk)
5874 {
5875 CONFIGPARMS cfg;
5876 ConfigPageHeader_t hdr;
5877 dma_addr_t dma_handle;
5878 pRaidPhysDiskPage1_t buffer = NULL;
5879 int rc;
5880 int i;
5881 __le64 sas_address;
5882
5883 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5884 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5885 rc = 0;
5886
5887 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5888 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5889 hdr.PageNumber = 1;
5890 cfg.cfghdr.hdr = &hdr;
5891 cfg.physAddr = -1;
5892 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5893
5894 if (mpt_config(ioc, &cfg) != 0) {
5895 rc = -EFAULT;
5896 goto out;
5897 }
5898
5899 if (!hdr.PageLength) {
5900 rc = -EFAULT;
5901 goto out;
5902 }
5903
5904 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5905 &dma_handle, GFP_KERNEL);
5906
5907 if (!buffer) {
5908 rc = -ENOMEM;
5909 goto out;
5910 }
5911
5912 cfg.physAddr = dma_handle;
5913 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5914 cfg.pageAddr = phys_disk_num;
5915
5916 if (mpt_config(ioc, &cfg) != 0) {
5917 rc = -EFAULT;
5918 goto out;
5919 }
5920
5921 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5922 phys_disk->PhysDiskNum = phys_disk_num;
5923 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5924 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5925 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5926 phys_disk->Path[i].OwnerIdentifier =
5927 buffer->Path[i].OwnerIdentifier;
5928 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5929 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5930 sas_address = le64_to_cpu(sas_address);
5931 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5932 memcpy(&sas_address,
5933 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5934 sas_address = le64_to_cpu(sas_address);
5935 memcpy(&phys_disk->Path[i].OwnerWWID,
5936 &sas_address, sizeof(__le64));
5937 }
5938
5939 out:
5940
5941 if (buffer)
5942 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5943 buffer, dma_handle);
5944
5945 return rc;
5946 }
5947 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5948
5949
5950 /**
5951 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5952 * @ioc: Pointer to a Adapter Strucutre
5953 *
5954 * Return:
5955 * 0 on success
5956 * -EFAULT if read of config page header fails or data pointer not NULL
5957 * -ENOMEM if pci_alloc failed
5958 **/
5959 int
mpt_findImVolumes(MPT_ADAPTER * ioc)5960 mpt_findImVolumes(MPT_ADAPTER *ioc)
5961 {
5962 IOCPage2_t *pIoc2;
5963 u8 *mem;
5964 dma_addr_t ioc2_dma;
5965 CONFIGPARMS cfg;
5966 ConfigPageHeader_t header;
5967 int rc = 0;
5968 int iocpage2sz;
5969 int i;
5970
5971 if (!ioc->ir_firmware)
5972 return 0;
5973
5974 /* Free the old page
5975 */
5976 kfree(ioc->raid_data.pIocPg2);
5977 ioc->raid_data.pIocPg2 = NULL;
5978 mpt_inactive_raid_list_free(ioc);
5979
5980 /* Read IOCP2 header then the page.
5981 */
5982 header.PageVersion = 0;
5983 header.PageLength = 0;
5984 header.PageNumber = 2;
5985 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5986 cfg.cfghdr.hdr = &header;
5987 cfg.physAddr = -1;
5988 cfg.pageAddr = 0;
5989 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5990 cfg.dir = 0;
5991 cfg.timeout = 0;
5992 if (mpt_config(ioc, &cfg) != 0)
5993 return -EFAULT;
5994
5995 if (header.PageLength == 0)
5996 return -EFAULT;
5997
5998 iocpage2sz = header.PageLength * 4;
5999 pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma,
6000 GFP_KERNEL);
6001 if (!pIoc2)
6002 return -ENOMEM;
6003
6004 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6005 cfg.physAddr = ioc2_dma;
6006 if (mpt_config(ioc, &cfg) != 0)
6007 goto out;
6008
6009 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL);
6010 if (!mem) {
6011 rc = -ENOMEM;
6012 goto out;
6013 }
6014
6015 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6016
6017 mpt_read_ioc_pg_3(ioc);
6018
6019 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6020 mpt_inactive_raid_volumes(ioc,
6021 pIoc2->RaidVolume[i].VolumeBus,
6022 pIoc2->RaidVolume[i].VolumeID);
6023
6024 out:
6025 dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma);
6026
6027 return rc;
6028 }
6029
6030 static int
mpt_read_ioc_pg_3(MPT_ADAPTER * ioc)6031 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6032 {
6033 IOCPage3_t *pIoc3;
6034 u8 *mem;
6035 CONFIGPARMS cfg;
6036 ConfigPageHeader_t header;
6037 dma_addr_t ioc3_dma;
6038 int iocpage3sz = 0;
6039
6040 /* Free the old page
6041 */
6042 kfree(ioc->raid_data.pIocPg3);
6043 ioc->raid_data.pIocPg3 = NULL;
6044
6045 /* There is at least one physical disk.
6046 * Read and save IOC Page 3
6047 */
6048 header.PageVersion = 0;
6049 header.PageLength = 0;
6050 header.PageNumber = 3;
6051 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6052 cfg.cfghdr.hdr = &header;
6053 cfg.physAddr = -1;
6054 cfg.pageAddr = 0;
6055 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6056 cfg.dir = 0;
6057 cfg.timeout = 0;
6058 if (mpt_config(ioc, &cfg) != 0)
6059 return 0;
6060
6061 if (header.PageLength == 0)
6062 return 0;
6063
6064 /* Read Header good, alloc memory
6065 */
6066 iocpage3sz = header.PageLength * 4;
6067 pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma,
6068 GFP_KERNEL);
6069 if (!pIoc3)
6070 return 0;
6071
6072 /* Read the Page and save the data
6073 * into malloc'd memory.
6074 */
6075 cfg.physAddr = ioc3_dma;
6076 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6077 if (mpt_config(ioc, &cfg) == 0) {
6078 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6079 if (mem) {
6080 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6081 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6082 }
6083 }
6084
6085 dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma);
6086
6087 return 0;
6088 }
6089
6090 static void
mpt_read_ioc_pg_4(MPT_ADAPTER * ioc)6091 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6092 {
6093 IOCPage4_t *pIoc4;
6094 CONFIGPARMS cfg;
6095 ConfigPageHeader_t header;
6096 dma_addr_t ioc4_dma;
6097 int iocpage4sz;
6098
6099 /* Read and save IOC Page 4
6100 */
6101 header.PageVersion = 0;
6102 header.PageLength = 0;
6103 header.PageNumber = 4;
6104 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6105 cfg.cfghdr.hdr = &header;
6106 cfg.physAddr = -1;
6107 cfg.pageAddr = 0;
6108 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6109 cfg.dir = 0;
6110 cfg.timeout = 0;
6111 if (mpt_config(ioc, &cfg) != 0)
6112 return;
6113
6114 if (header.PageLength == 0)
6115 return;
6116
6117 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6118 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6119 pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz,
6120 &ioc4_dma, GFP_KERNEL);
6121 if (!pIoc4)
6122 return;
6123 ioc->alloc_total += iocpage4sz;
6124 } else {
6125 ioc4_dma = ioc->spi_data.IocPg4_dma;
6126 iocpage4sz = ioc->spi_data.IocPg4Sz;
6127 }
6128
6129 /* Read the Page into dma memory.
6130 */
6131 cfg.physAddr = ioc4_dma;
6132 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6133 if (mpt_config(ioc, &cfg) == 0) {
6134 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6135 ioc->spi_data.IocPg4_dma = ioc4_dma;
6136 ioc->spi_data.IocPg4Sz = iocpage4sz;
6137 } else {
6138 dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4,
6139 ioc4_dma);
6140 ioc->spi_data.pIocPg4 = NULL;
6141 ioc->alloc_total -= iocpage4sz;
6142 }
6143 }
6144
6145 static void
mpt_read_ioc_pg_1(MPT_ADAPTER * ioc)6146 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6147 {
6148 IOCPage1_t *pIoc1;
6149 CONFIGPARMS cfg;
6150 ConfigPageHeader_t header;
6151 dma_addr_t ioc1_dma;
6152 int iocpage1sz = 0;
6153 u32 tmp;
6154
6155 /* Check the Coalescing Timeout in IOC Page 1
6156 */
6157 header.PageVersion = 0;
6158 header.PageLength = 0;
6159 header.PageNumber = 1;
6160 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6161 cfg.cfghdr.hdr = &header;
6162 cfg.physAddr = -1;
6163 cfg.pageAddr = 0;
6164 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6165 cfg.dir = 0;
6166 cfg.timeout = 0;
6167 if (mpt_config(ioc, &cfg) != 0)
6168 return;
6169
6170 if (header.PageLength == 0)
6171 return;
6172
6173 /* Read Header good, alloc memory
6174 */
6175 iocpage1sz = header.PageLength * 4;
6176 pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma,
6177 GFP_KERNEL);
6178 if (!pIoc1)
6179 return;
6180
6181 /* Read the Page and check coalescing timeout
6182 */
6183 cfg.physAddr = ioc1_dma;
6184 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6185 if (mpt_config(ioc, &cfg) == 0) {
6186
6187 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6188 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6189 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6190
6191 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6192 ioc->name, tmp));
6193
6194 if (tmp > MPT_COALESCING_TIMEOUT) {
6195 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6196
6197 /* Write NVRAM and current
6198 */
6199 cfg.dir = 1;
6200 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6201 if (mpt_config(ioc, &cfg) == 0) {
6202 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6203 ioc->name, MPT_COALESCING_TIMEOUT));
6204
6205 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6206 if (mpt_config(ioc, &cfg) == 0) {
6207 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6208 "Reset NVRAM Coalescing Timeout to = %d\n",
6209 ioc->name, MPT_COALESCING_TIMEOUT));
6210 } else {
6211 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6212 "Reset NVRAM Coalescing Timeout Failed\n",
6213 ioc->name));
6214 }
6215
6216 } else {
6217 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6218 "Reset of Current Coalescing Timeout Failed!\n",
6219 ioc->name));
6220 }
6221 }
6222
6223 } else {
6224 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6225 }
6226 }
6227
6228 dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma);
6229
6230 return;
6231 }
6232
6233 static void
mpt_get_manufacturing_pg_0(MPT_ADAPTER * ioc)6234 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6235 {
6236 CONFIGPARMS cfg;
6237 ConfigPageHeader_t hdr;
6238 dma_addr_t buf_dma;
6239 ManufacturingPage0_t *pbuf = NULL;
6240
6241 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6242 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6243
6244 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6245 cfg.cfghdr.hdr = &hdr;
6246 cfg.physAddr = -1;
6247 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6248 cfg.timeout = 10;
6249
6250 if (mpt_config(ioc, &cfg) != 0)
6251 goto out;
6252
6253 if (!cfg.cfghdr.hdr->PageLength)
6254 goto out;
6255
6256 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6257 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
6258 &buf_dma, GFP_KERNEL);
6259 if (!pbuf)
6260 goto out;
6261
6262 cfg.physAddr = buf_dma;
6263
6264 if (mpt_config(ioc, &cfg) != 0)
6265 goto out;
6266
6267 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6268 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6269 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6270
6271 out:
6272
6273 if (pbuf)
6274 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf,
6275 buf_dma);
6276 }
6277
6278 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6279 /**
6280 * SendEventNotification - Send EventNotification (on or off) request to adapter
6281 * @ioc: Pointer to MPT_ADAPTER structure
6282 * @EvSwitch: Event switch flags
6283 * @sleepFlag: Specifies whether the process can sleep
6284 */
6285 static int
SendEventNotification(MPT_ADAPTER * ioc,u8 EvSwitch,int sleepFlag)6286 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6287 {
6288 EventNotification_t evn;
6289 MPIDefaultReply_t reply_buf;
6290
6291 memset(&evn, 0, sizeof(EventNotification_t));
6292 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6293
6294 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6295 evn.Switch = EvSwitch;
6296 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6297
6298 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6299 "Sending EventNotification (%d) request %p\n",
6300 ioc->name, EvSwitch, &evn));
6301
6302 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6303 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6304 sleepFlag);
6305 }
6306
6307 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6308 /**
6309 * SendEventAck - Send EventAck request to MPT adapter.
6310 * @ioc: Pointer to MPT_ADAPTER structure
6311 * @evnp: Pointer to original EventNotification request
6312 */
6313 static int
SendEventAck(MPT_ADAPTER * ioc,EventNotificationReply_t * evnp)6314 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6315 {
6316 EventAck_t *pAck;
6317
6318 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6319 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6320 ioc->name, __func__));
6321 return -1;
6322 }
6323
6324 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6325
6326 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6327 pAck->ChainOffset = 0;
6328 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6329 pAck->MsgFlags = 0;
6330 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6331 pAck->Event = evnp->Event;
6332 pAck->EventContext = evnp->EventContext;
6333
6334 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6335
6336 return 0;
6337 }
6338
6339 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6340 /**
6341 * mpt_config - Generic function to issue config message
6342 * @ioc: Pointer to an adapter structure
6343 * @pCfg: Pointer to a configuration structure. Struct contains
6344 * action, page address, direction, physical address
6345 * and pointer to a configuration page header
6346 * Page header is updated.
6347 *
6348 * Returns 0 for success
6349 * -EAGAIN if no msg frames currently available
6350 * -EFAULT for non-successful reply or no reply (timeout)
6351 */
6352 int
mpt_config(MPT_ADAPTER * ioc,CONFIGPARMS * pCfg)6353 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6354 {
6355 Config_t *pReq;
6356 ConfigReply_t *pReply;
6357 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6358 MPT_FRAME_HDR *mf;
6359 int ii;
6360 int flagsLength;
6361 long timeout;
6362 int ret;
6363 u8 page_type = 0, extend_page;
6364 unsigned long timeleft;
6365 unsigned long flags;
6366 u8 issue_hard_reset = 0;
6367 u8 retry_count = 0;
6368
6369 might_sleep();
6370
6371 /* don't send a config page during diag reset */
6372 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6373 if (ioc->ioc_reset_in_progress) {
6374 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6375 "%s: busy with host reset\n", ioc->name, __func__));
6376 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6377 return -EBUSY;
6378 }
6379 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6380
6381 /* don't send if no chance of success */
6382 if (!ioc->active ||
6383 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6384 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6385 "%s: ioc not operational, %d, %xh\n",
6386 ioc->name, __func__, ioc->active,
6387 mpt_GetIocState(ioc, 0)));
6388 return -EFAULT;
6389 }
6390
6391 retry_config:
6392 mutex_lock(&ioc->mptbase_cmds.mutex);
6393 /* init the internal cmd struct */
6394 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6395 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6396
6397 /* Get and Populate a free Frame
6398 */
6399 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6400 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6401 "mpt_config: no msg frames!\n", ioc->name));
6402 ret = -EAGAIN;
6403 goto out;
6404 }
6405
6406 pReq = (Config_t *)mf;
6407 pReq->Action = pCfg->action;
6408 pReq->Reserved = 0;
6409 pReq->ChainOffset = 0;
6410 pReq->Function = MPI_FUNCTION_CONFIG;
6411
6412 /* Assume page type is not extended and clear "reserved" fields. */
6413 pReq->ExtPageLength = 0;
6414 pReq->ExtPageType = 0;
6415 pReq->MsgFlags = 0;
6416
6417 for (ii=0; ii < 8; ii++)
6418 pReq->Reserved2[ii] = 0;
6419
6420 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6421 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6422 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6423 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6424
6425 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6426 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6427 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6428 pReq->ExtPageType = pExtHdr->ExtPageType;
6429 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6430
6431 /* Page Length must be treated as a reserved field for the
6432 * extended header.
6433 */
6434 pReq->Header.PageLength = 0;
6435 }
6436
6437 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6438
6439 /* Add a SGE to the config request.
6440 */
6441 if (pCfg->dir)
6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6443 else
6444 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6445
6446 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6447 MPI_CONFIG_PAGETYPE_EXTENDED) {
6448 flagsLength |= pExtHdr->ExtPageLength * 4;
6449 page_type = pReq->ExtPageType;
6450 extend_page = 1;
6451 } else {
6452 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6453 page_type = pReq->Header.PageType;
6454 extend_page = 0;
6455 }
6456
6457 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6458 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6459 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6460
6461 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6462 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6463 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6464 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6465 timeout);
6466 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6467 ret = -ETIME;
6468 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6469 "Failed Sending Config request type 0x%x, page 0x%x,"
6470 " action %d, status %xh, time left %ld\n\n",
6471 ioc->name, page_type, pReq->Header.PageNumber,
6472 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6473 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6474 goto out;
6475 if (!timeleft) {
6476 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6477 if (ioc->ioc_reset_in_progress) {
6478 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6479 flags);
6480 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6481 " progress mpt_config timed out.!!\n",
6482 __func__, ioc->name);
6483 mutex_unlock(&ioc->mptbase_cmds.mutex);
6484 return -EFAULT;
6485 }
6486 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6487 issue_hard_reset = 1;
6488 }
6489 goto out;
6490 }
6491
6492 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6493 ret = -1;
6494 goto out;
6495 }
6496 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6497 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6498 if (ret == MPI_IOCSTATUS_SUCCESS) {
6499 if (extend_page) {
6500 pCfg->cfghdr.ehdr->ExtPageLength =
6501 le16_to_cpu(pReply->ExtPageLength);
6502 pCfg->cfghdr.ehdr->ExtPageType =
6503 pReply->ExtPageType;
6504 }
6505 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6506 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6507 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6508 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6509
6510 }
6511
6512 if (retry_count)
6513 printk(MYIOC_s_INFO_FMT "Retry completed "
6514 "ret=0x%x timeleft=%ld\n",
6515 ioc->name, ret, timeleft);
6516
6517 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6518 ret, le32_to_cpu(pReply->IOCLogInfo)));
6519
6520 out:
6521
6522 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6523 mutex_unlock(&ioc->mptbase_cmds.mutex);
6524 if (issue_hard_reset) {
6525 issue_hard_reset = 0;
6526 printk(MYIOC_s_WARN_FMT
6527 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6528 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6529 if (retry_count == 0) {
6530 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6531 retry_count++;
6532 } else
6533 mpt_HardResetHandler(ioc, CAN_SLEEP);
6534
6535 mpt_free_msg_frame(ioc, mf);
6536 /* attempt one retry for a timed out command */
6537 if (retry_count < 2) {
6538 printk(MYIOC_s_INFO_FMT
6539 "Attempting Retry Config request"
6540 " type 0x%x, page 0x%x,"
6541 " action %d\n", ioc->name, page_type,
6542 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6543 retry_count++;
6544 goto retry_config;
6545 }
6546 }
6547 return ret;
6548
6549 }
6550
6551 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6552 /**
6553 * mpt_ioc_reset - Base cleanup for hard reset
6554 * @ioc: Pointer to the adapter structure
6555 * @reset_phase: Indicates pre- or post-reset functionality
6556 *
6557 * Remark: Frees resources with internally generated commands.
6558 */
6559 static int
mpt_ioc_reset(MPT_ADAPTER * ioc,int reset_phase)6560 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6561 {
6562 switch (reset_phase) {
6563 case MPT_IOC_SETUP_RESET:
6564 ioc->taskmgmt_quiesce_io = 1;
6565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6566 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6567 break;
6568 case MPT_IOC_PRE_RESET:
6569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6570 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6571 break;
6572 case MPT_IOC_POST_RESET:
6573 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6574 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6575 /* wake up mptbase_cmds */
6576 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6577 ioc->mptbase_cmds.status |=
6578 MPT_MGMT_STATUS_DID_IOCRESET;
6579 complete(&ioc->mptbase_cmds.done);
6580 }
6581 /* wake up taskmgmt_cmds */
6582 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6583 ioc->taskmgmt_cmds.status |=
6584 MPT_MGMT_STATUS_DID_IOCRESET;
6585 complete(&ioc->taskmgmt_cmds.done);
6586 }
6587 break;
6588 default:
6589 break;
6590 }
6591
6592 return 1; /* currently means nothing really */
6593 }
6594
6595
6596 #ifdef CONFIG_PROC_FS /* { */
6597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6598 /*
6599 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6600 */
6601 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6602 /**
6603 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6604 *
6605 * Returns 0 for success, non-zero for failure.
6606 */
6607 static int
procmpt_create(void)6608 procmpt_create(void)
6609 {
6610 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6611 if (mpt_proc_root_dir == NULL)
6612 return -ENOTDIR;
6613
6614 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6615 mpt_summary_proc_show);
6616 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6617 mpt_version_proc_show);
6618 return 0;
6619 }
6620
6621 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6622 /**
6623 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6624 *
6625 * Returns 0 for success, non-zero for failure.
6626 */
6627 static void
procmpt_destroy(void)6628 procmpt_destroy(void)
6629 {
6630 remove_proc_entry("version", mpt_proc_root_dir);
6631 remove_proc_entry("summary", mpt_proc_root_dir);
6632 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6633 }
6634
6635 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6636 /*
6637 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6638 */
6639 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6640
mpt_summary_proc_show(struct seq_file * m,void * v)6641 static int mpt_summary_proc_show(struct seq_file *m, void *v)
6642 {
6643 MPT_ADAPTER *ioc = m->private;
6644
6645 if (ioc) {
6646 seq_mpt_print_ioc_summary(ioc, m, 1);
6647 } else {
6648 list_for_each_entry(ioc, &ioc_list, list) {
6649 seq_mpt_print_ioc_summary(ioc, m, 1);
6650 }
6651 }
6652
6653 return 0;
6654 }
6655
mpt_version_proc_show(struct seq_file * m,void * v)6656 static int mpt_version_proc_show(struct seq_file *m, void *v)
6657 {
6658 u8 cb_idx;
6659 int scsi, fc, sas, lan, ctl, targ;
6660 char *drvname;
6661
6662 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6663 seq_printf(m, " Fusion MPT base driver\n");
6664
6665 scsi = fc = sas = lan = ctl = targ = 0;
6666 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6667 drvname = NULL;
6668 if (MptCallbacks[cb_idx]) {
6669 switch (MptDriverClass[cb_idx]) {
6670 case MPTSPI_DRIVER:
6671 if (!scsi++) drvname = "SPI host";
6672 break;
6673 case MPTFC_DRIVER:
6674 if (!fc++) drvname = "FC host";
6675 break;
6676 case MPTSAS_DRIVER:
6677 if (!sas++) drvname = "SAS host";
6678 break;
6679 case MPTLAN_DRIVER:
6680 if (!lan++) drvname = "LAN";
6681 break;
6682 case MPTSTM_DRIVER:
6683 if (!targ++) drvname = "SCSI target";
6684 break;
6685 case MPTCTL_DRIVER:
6686 if (!ctl++) drvname = "ioctl";
6687 break;
6688 }
6689
6690 if (drvname)
6691 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6692 }
6693 }
6694
6695 return 0;
6696 }
6697
mpt_iocinfo_proc_show(struct seq_file * m,void * v)6698 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6699 {
6700 MPT_ADAPTER *ioc = m->private;
6701 char expVer[32];
6702 int sz;
6703 int p;
6704
6705 mpt_get_fw_exp_ver(expVer, ioc);
6706
6707 seq_printf(m, "%s:", ioc->name);
6708 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6709 seq_printf(m, " (f/w download boot flag set)");
6710 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6711 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6712
6713 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6714 ioc->facts.ProductID,
6715 ioc->prod_name);
6716 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6717 if (ioc->facts.FWImageSize)
6718 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6719 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6720 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6721 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6722
6723 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6724 ioc->facts.CurrentHostMfaHighAddr);
6725 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6726 ioc->facts.CurrentSenseBufferHighAddr);
6727
6728 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6729 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6730
6731 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6732 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6733 /*
6734 * Rounding UP to nearest 4-kB boundary here...
6735 */
6736 sz = (ioc->req_sz * ioc->req_depth) + 128;
6737 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6738 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6739 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6740 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6741 4*ioc->facts.RequestFrameSize,
6742 ioc->facts.GlobalCredits);
6743
6744 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6745 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6746 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6747 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6748 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6749 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6750 ioc->facts.CurReplyFrameSize,
6751 ioc->facts.ReplyQueueDepth);
6752
6753 seq_printf(m, " MaxDevices = %d\n",
6754 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6755 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6756
6757 /* per-port info */
6758 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6759 seq_printf(m, " PortNumber = %d (of %d)\n",
6760 p+1,
6761 ioc->facts.NumberOfPorts);
6762 if (ioc->bus_type == FC) {
6763 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6764 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6765 seq_printf(m, " LanAddr = %pMR\n", a);
6766 }
6767 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6768 ioc->fc_port_page0[p].WWNN.High,
6769 ioc->fc_port_page0[p].WWNN.Low,
6770 ioc->fc_port_page0[p].WWPN.High,
6771 ioc->fc_port_page0[p].WWPN.Low);
6772 }
6773 }
6774
6775 return 0;
6776 }
6777 #endif /* CONFIG_PROC_FS } */
6778
6779 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6780 static void
mpt_get_fw_exp_ver(char * buf,MPT_ADAPTER * ioc)6781 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6782 {
6783 buf[0] ='\0';
6784 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6785 sprintf(buf, " (Exp %02d%02d)",
6786 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6787 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6788
6789 /* insider hack! */
6790 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6791 strcat(buf, " [MDBG]");
6792 }
6793 }
6794
6795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6796 /**
6797 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6798 * @ioc: Pointer to MPT_ADAPTER structure
6799 * @buffer: Pointer to buffer where IOC summary info should be written
6800 * @size: Pointer to number of bytes we wrote (set by this routine)
6801 * @len: Offset at which to start writing in buffer
6802 * @showlan: Display LAN stuff?
6803 *
6804 * This routine writes (english readable) ASCII text, which represents
6805 * a summary of IOC information, to a buffer.
6806 */
6807 void
mpt_print_ioc_summary(MPT_ADAPTER * ioc,char * buffer,int * size,int len,int showlan)6808 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6809 {
6810 char expVer[32];
6811 int y;
6812
6813 mpt_get_fw_exp_ver(expVer, ioc);
6814
6815 /*
6816 * Shorter summary of attached ioc's...
6817 */
6818 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6819 ioc->name,
6820 ioc->prod_name,
6821 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6822 ioc->facts.FWVersion.Word,
6823 expVer,
6824 ioc->facts.NumberOfPorts,
6825 ioc->req_depth);
6826
6827 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6828 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6829 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6830 }
6831
6832 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6833
6834 if (!ioc->active)
6835 y += sprintf(buffer+len+y, " (disabled)");
6836
6837 y += sprintf(buffer+len+y, "\n");
6838
6839 *size = y;
6840 }
6841
6842 #ifdef CONFIG_PROC_FS
seq_mpt_print_ioc_summary(MPT_ADAPTER * ioc,struct seq_file * m,int showlan)6843 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6844 {
6845 char expVer[32];
6846
6847 mpt_get_fw_exp_ver(expVer, ioc);
6848
6849 /*
6850 * Shorter summary of attached ioc's...
6851 */
6852 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6853 ioc->name,
6854 ioc->prod_name,
6855 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6856 ioc->facts.FWVersion.Word,
6857 expVer,
6858 ioc->facts.NumberOfPorts,
6859 ioc->req_depth);
6860
6861 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6862 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6863 seq_printf(m, ", LanAddr=%pMR", a);
6864 }
6865
6866 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6867
6868 if (!ioc->active)
6869 seq_printf(m, " (disabled)");
6870
6871 seq_putc(m, '\n');
6872 }
6873 #endif
6874
6875 /**
6876 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6877 * @ioc: Pointer to MPT_ADAPTER structure
6878 *
6879 * Returns 0 for SUCCESS or -1 if FAILED.
6880 *
6881 * If -1 is return, then it was not possible to set the flags
6882 **/
6883 int
mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER * ioc)6884 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6885 {
6886 unsigned long flags;
6887 int retval;
6888
6889 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6890 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6891 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6892 retval = -1;
6893 goto out;
6894 }
6895 retval = 0;
6896 ioc->taskmgmt_in_progress = 1;
6897 ioc->taskmgmt_quiesce_io = 1;
6898 if (ioc->alt_ioc) {
6899 ioc->alt_ioc->taskmgmt_in_progress = 1;
6900 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6901 }
6902 out:
6903 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6904 return retval;
6905 }
6906 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6907
6908 /**
6909 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6910 * @ioc: Pointer to MPT_ADAPTER structure
6911 *
6912 **/
6913 void
mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER * ioc)6914 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6915 {
6916 unsigned long flags;
6917
6918 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6919 ioc->taskmgmt_in_progress = 0;
6920 ioc->taskmgmt_quiesce_io = 0;
6921 if (ioc->alt_ioc) {
6922 ioc->alt_ioc->taskmgmt_in_progress = 0;
6923 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6924 }
6925 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6926 }
6927 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6928
6929
6930 /**
6931 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6932 * the kernel
6933 * @ioc: Pointer to MPT_ADAPTER structure
6934 *
6935 **/
6936 void __noreturn
mpt_halt_firmware(MPT_ADAPTER * ioc)6937 mpt_halt_firmware(MPT_ADAPTER *ioc)
6938 {
6939 u32 ioc_raw_state;
6940
6941 ioc_raw_state = mpt_GetIocState(ioc, 0);
6942
6943 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6944 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6945 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6946 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6947 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6948 } else {
6949 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6950 panic("%s: Firmware is halted due to command timeout\n",
6951 ioc->name);
6952 }
6953 }
6954 EXPORT_SYMBOL(mpt_halt_firmware);
6955
6956 /**
6957 * mpt_SoftResetHandler - Issues a less expensive reset
6958 * @ioc: Pointer to MPT_ADAPTER structure
6959 * @sleepFlag: Indicates if sleep or schedule must be called.
6960 *
6961 * Returns 0 for SUCCESS or -1 if FAILED.
6962 *
6963 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6964 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6965 * All posted buffers are freed, and event notification is turned off.
6966 * IOC doesn't reply to any outstanding request. This will transfer IOC
6967 * to READY state.
6968 **/
6969 static int
mpt_SoftResetHandler(MPT_ADAPTER * ioc,int sleepFlag)6970 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6971 {
6972 int rc;
6973 int ii;
6974 u8 cb_idx;
6975 unsigned long flags;
6976 u32 ioc_state;
6977 unsigned long time_count;
6978
6979 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6980 ioc->name));
6981
6982 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6983
6984 if (mpt_fwfault_debug)
6985 mpt_halt_firmware(ioc);
6986
6987 if (ioc_state == MPI_IOC_STATE_FAULT ||
6988 ioc_state == MPI_IOC_STATE_RESET) {
6989 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6990 "skipping, either in FAULT or RESET state!\n", ioc->name));
6991 return -1;
6992 }
6993
6994 if (ioc->bus_type == FC) {
6995 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6996 "skipping, because the bus type is FC!\n", ioc->name));
6997 return -1;
6998 }
6999
7000 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7001 if (ioc->ioc_reset_in_progress) {
7002 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7003 return -1;
7004 }
7005 ioc->ioc_reset_in_progress = 1;
7006 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7007
7008 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7009 if (MptResetHandlers[cb_idx])
7010 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7011 }
7012
7013 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7014 if (ioc->taskmgmt_in_progress) {
7015 ioc->ioc_reset_in_progress = 0;
7016 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7017 return -1;
7018 }
7019 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7020 /* Disable reply interrupts (also blocks FreeQ) */
7021 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7022 ioc->active = 0;
7023 time_count = jiffies;
7024
7025 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7026
7027 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7028 if (MptResetHandlers[cb_idx])
7029 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7030 }
7031
7032 if (rc)
7033 goto out;
7034
7035 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7036 if (ioc_state != MPI_IOC_STATE_READY)
7037 goto out;
7038
7039 for (ii = 0; ii < 5; ii++) {
7040 /* Get IOC facts! Allow 5 retries */
7041 rc = GetIocFacts(ioc, sleepFlag,
7042 MPT_HOSTEVENT_IOC_RECOVER);
7043 if (rc == 0)
7044 break;
7045 if (sleepFlag == CAN_SLEEP)
7046 msleep(100);
7047 else
7048 mdelay(100);
7049 }
7050 if (ii == 5)
7051 goto out;
7052
7053 rc = PrimeIocFifos(ioc);
7054 if (rc != 0)
7055 goto out;
7056
7057 rc = SendIocInit(ioc, sleepFlag);
7058 if (rc != 0)
7059 goto out;
7060
7061 rc = SendEventNotification(ioc, 1, sleepFlag);
7062 if (rc != 0)
7063 goto out;
7064
7065 if (ioc->hard_resets < -1)
7066 ioc->hard_resets++;
7067
7068 /*
7069 * At this point, we know soft reset succeeded.
7070 */
7071
7072 ioc->active = 1;
7073 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7074
7075 out:
7076 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7077 ioc->ioc_reset_in_progress = 0;
7078 ioc->taskmgmt_quiesce_io = 0;
7079 ioc->taskmgmt_in_progress = 0;
7080 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7081
7082 if (ioc->active) { /* otherwise, hard reset coming */
7083 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7084 if (MptResetHandlers[cb_idx])
7085 mpt_signal_reset(cb_idx, ioc,
7086 MPT_IOC_POST_RESET);
7087 }
7088 }
7089
7090 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7091 "SoftResetHandler: completed (%d seconds): %s\n",
7092 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7093 ((rc == 0) ? "SUCCESS" : "FAILED")));
7094
7095 return rc;
7096 }
7097
7098 /**
7099 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7100 * @ioc: Pointer to MPT_ADAPTER structure
7101 * @sleepFlag: Indicates if sleep or schedule must be called.
7102 *
7103 * Returns 0 for SUCCESS or -1 if FAILED.
7104 * Try for softreset first, only if it fails go for expensive
7105 * HardReset.
7106 **/
7107 int
mpt_Soft_Hard_ResetHandler(MPT_ADAPTER * ioc,int sleepFlag)7108 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7109 int ret = -1;
7110
7111 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7112 if (ret == 0)
7113 return ret;
7114 ret = mpt_HardResetHandler(ioc, sleepFlag);
7115 return ret;
7116 }
7117 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7118
7119 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7120 /*
7121 * Reset Handling
7122 */
7123 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7124 /**
7125 * mpt_HardResetHandler - Generic reset handler
7126 * @ioc: Pointer to MPT_ADAPTER structure
7127 * @sleepFlag: Indicates if sleep or schedule must be called.
7128 *
7129 * Issues SCSI Task Management call based on input arg values.
7130 * If TaskMgmt fails, returns associated SCSI request.
7131 *
7132 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7133 * or a non-interrupt thread. In the former, must not call schedule().
7134 *
7135 * Note: A return of -1 is a FATAL error case, as it means a
7136 * FW reload/initialization failed.
7137 *
7138 * Returns 0 for SUCCESS or -1 if FAILED.
7139 */
7140 int
mpt_HardResetHandler(MPT_ADAPTER * ioc,int sleepFlag)7141 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7142 {
7143 int rc;
7144 u8 cb_idx;
7145 unsigned long flags;
7146 unsigned long time_count;
7147
7148 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7149 #ifdef MFCNT
7150 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7151 printk("MF count 0x%x !\n", ioc->mfcnt);
7152 #endif
7153 if (mpt_fwfault_debug)
7154 mpt_halt_firmware(ioc);
7155
7156 /* Reset the adapter. Prevent more than 1 call to
7157 * mpt_do_ioc_recovery at any instant in time.
7158 */
7159 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7160 if (ioc->ioc_reset_in_progress) {
7161 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7162 ioc->wait_on_reset_completion = 1;
7163 do {
7164 ssleep(1);
7165 } while (ioc->ioc_reset_in_progress == 1);
7166 ioc->wait_on_reset_completion = 0;
7167 return ioc->reset_status;
7168 }
7169 if (ioc->wait_on_reset_completion) {
7170 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7171 rc = 0;
7172 time_count = jiffies;
7173 goto exit;
7174 }
7175 ioc->ioc_reset_in_progress = 1;
7176 if (ioc->alt_ioc)
7177 ioc->alt_ioc->ioc_reset_in_progress = 1;
7178 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7179
7180
7181 /* The SCSI driver needs to adjust timeouts on all current
7182 * commands prior to the diagnostic reset being issued.
7183 * Prevents timeouts occurring during a diagnostic reset...very bad.
7184 * For all other protocol drivers, this is a no-op.
7185 */
7186 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7187 if (MptResetHandlers[cb_idx]) {
7188 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7189 if (ioc->alt_ioc)
7190 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7191 MPT_IOC_SETUP_RESET);
7192 }
7193 }
7194
7195 time_count = jiffies;
7196 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7197 if (rc != 0) {
7198 printk(KERN_WARNING MYNAM
7199 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7200 rc, ioc->name, mpt_GetIocState(ioc, 0));
7201 } else {
7202 if (ioc->hard_resets < -1)
7203 ioc->hard_resets++;
7204 }
7205
7206 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7207 ioc->ioc_reset_in_progress = 0;
7208 ioc->taskmgmt_quiesce_io = 0;
7209 ioc->taskmgmt_in_progress = 0;
7210 ioc->reset_status = rc;
7211 if (ioc->alt_ioc) {
7212 ioc->alt_ioc->ioc_reset_in_progress = 0;
7213 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7214 ioc->alt_ioc->taskmgmt_in_progress = 0;
7215 }
7216 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7217
7218 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7219 if (MptResetHandlers[cb_idx]) {
7220 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7221 if (ioc->alt_ioc)
7222 mpt_signal_reset(cb_idx,
7223 ioc->alt_ioc, MPT_IOC_POST_RESET);
7224 }
7225 }
7226 exit:
7227 dtmprintk(ioc,
7228 printk(MYIOC_s_DEBUG_FMT
7229 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7230 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7231 "SUCCESS" : "FAILED")));
7232
7233 return rc;
7234 }
7235
7236 #ifdef CONFIG_FUSION_LOGGING
7237 static void
mpt_display_event_info(MPT_ADAPTER * ioc,EventNotificationReply_t * pEventReply)7238 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7239 {
7240 char *ds = NULL;
7241 u32 evData0;
7242 int ii;
7243 u8 event;
7244 char *evStr = ioc->evStr;
7245
7246 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7247 evData0 = le32_to_cpu(pEventReply->Data[0]);
7248
7249 switch(event) {
7250 case MPI_EVENT_NONE:
7251 ds = "None";
7252 break;
7253 case MPI_EVENT_LOG_DATA:
7254 ds = "Log Data";
7255 break;
7256 case MPI_EVENT_STATE_CHANGE:
7257 ds = "State Change";
7258 break;
7259 case MPI_EVENT_UNIT_ATTENTION:
7260 ds = "Unit Attention";
7261 break;
7262 case MPI_EVENT_IOC_BUS_RESET:
7263 ds = "IOC Bus Reset";
7264 break;
7265 case MPI_EVENT_EXT_BUS_RESET:
7266 ds = "External Bus Reset";
7267 break;
7268 case MPI_EVENT_RESCAN:
7269 ds = "Bus Rescan Event";
7270 break;
7271 case MPI_EVENT_LINK_STATUS_CHANGE:
7272 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7273 ds = "Link Status(FAILURE) Change";
7274 else
7275 ds = "Link Status(ACTIVE) Change";
7276 break;
7277 case MPI_EVENT_LOOP_STATE_CHANGE:
7278 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7279 ds = "Loop State(LIP) Change";
7280 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7281 ds = "Loop State(LPE) Change";
7282 else
7283 ds = "Loop State(LPB) Change";
7284 break;
7285 case MPI_EVENT_LOGOUT:
7286 ds = "Logout";
7287 break;
7288 case MPI_EVENT_EVENT_CHANGE:
7289 if (evData0)
7290 ds = "Events ON";
7291 else
7292 ds = "Events OFF";
7293 break;
7294 case MPI_EVENT_INTEGRATED_RAID:
7295 {
7296 u8 ReasonCode = (u8)(evData0 >> 16);
7297 switch (ReasonCode) {
7298 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7299 ds = "Integrated Raid: Volume Created";
7300 break;
7301 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7302 ds = "Integrated Raid: Volume Deleted";
7303 break;
7304 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7305 ds = "Integrated Raid: Volume Settings Changed";
7306 break;
7307 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7308 ds = "Integrated Raid: Volume Status Changed";
7309 break;
7310 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7311 ds = "Integrated Raid: Volume Physdisk Changed";
7312 break;
7313 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7314 ds = "Integrated Raid: Physdisk Created";
7315 break;
7316 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7317 ds = "Integrated Raid: Physdisk Deleted";
7318 break;
7319 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7320 ds = "Integrated Raid: Physdisk Settings Changed";
7321 break;
7322 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7323 ds = "Integrated Raid: Physdisk Status Changed";
7324 break;
7325 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7326 ds = "Integrated Raid: Domain Validation Needed";
7327 break;
7328 case MPI_EVENT_RAID_RC_SMART_DATA :
7329 ds = "Integrated Raid; Smart Data";
7330 break;
7331 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7332 ds = "Integrated Raid: Replace Action Started";
7333 break;
7334 default:
7335 ds = "Integrated Raid";
7336 break;
7337 }
7338 break;
7339 }
7340 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7341 ds = "SCSI Device Status Change";
7342 break;
7343 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7344 {
7345 u8 id = (u8)(evData0);
7346 u8 channel = (u8)(evData0 >> 8);
7347 u8 ReasonCode = (u8)(evData0 >> 16);
7348 switch (ReasonCode) {
7349 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7350 snprintf(evStr, EVENT_DESCR_STR_SZ,
7351 "SAS Device Status Change: Added: "
7352 "id=%d channel=%d", id, channel);
7353 break;
7354 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7355 snprintf(evStr, EVENT_DESCR_STR_SZ,
7356 "SAS Device Status Change: Deleted: "
7357 "id=%d channel=%d", id, channel);
7358 break;
7359 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7360 snprintf(evStr, EVENT_DESCR_STR_SZ,
7361 "SAS Device Status Change: SMART Data: "
7362 "id=%d channel=%d", id, channel);
7363 break;
7364 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7365 snprintf(evStr, EVENT_DESCR_STR_SZ,
7366 "SAS Device Status Change: No Persistency: "
7367 "id=%d channel=%d", id, channel);
7368 break;
7369 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7370 snprintf(evStr, EVENT_DESCR_STR_SZ,
7371 "SAS Device Status Change: Unsupported Device "
7372 "Discovered : id=%d channel=%d", id, channel);
7373 break;
7374 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7375 snprintf(evStr, EVENT_DESCR_STR_SZ,
7376 "SAS Device Status Change: Internal Device "
7377 "Reset : id=%d channel=%d", id, channel);
7378 break;
7379 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7380 snprintf(evStr, EVENT_DESCR_STR_SZ,
7381 "SAS Device Status Change: Internal Task "
7382 "Abort : id=%d channel=%d", id, channel);
7383 break;
7384 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7385 snprintf(evStr, EVENT_DESCR_STR_SZ,
7386 "SAS Device Status Change: Internal Abort "
7387 "Task Set : id=%d channel=%d", id, channel);
7388 break;
7389 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7390 snprintf(evStr, EVENT_DESCR_STR_SZ,
7391 "SAS Device Status Change: Internal Clear "
7392 "Task Set : id=%d channel=%d", id, channel);
7393 break;
7394 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7395 snprintf(evStr, EVENT_DESCR_STR_SZ,
7396 "SAS Device Status Change: Internal Query "
7397 "Task : id=%d channel=%d", id, channel);
7398 break;
7399 default:
7400 snprintf(evStr, EVENT_DESCR_STR_SZ,
7401 "SAS Device Status Change: Unknown: "
7402 "id=%d channel=%d", id, channel);
7403 break;
7404 }
7405 break;
7406 }
7407 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7408 ds = "Bus Timer Expired";
7409 break;
7410 case MPI_EVENT_QUEUE_FULL:
7411 {
7412 u16 curr_depth = (u16)(evData0 >> 16);
7413 u8 channel = (u8)(evData0 >> 8);
7414 u8 id = (u8)(evData0);
7415
7416 snprintf(evStr, EVENT_DESCR_STR_SZ,
7417 "Queue Full: channel=%d id=%d depth=%d",
7418 channel, id, curr_depth);
7419 break;
7420 }
7421 case MPI_EVENT_SAS_SES:
7422 ds = "SAS SES Event";
7423 break;
7424 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7425 ds = "Persistent Table Full";
7426 break;
7427 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7428 {
7429 u8 LinkRates = (u8)(evData0 >> 8);
7430 u8 PhyNumber = (u8)(evData0);
7431 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7432 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7433 switch (LinkRates) {
7434 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7435 snprintf(evStr, EVENT_DESCR_STR_SZ,
7436 "SAS PHY Link Status: Phy=%d:"
7437 " Rate Unknown",PhyNumber);
7438 break;
7439 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7440 snprintf(evStr, EVENT_DESCR_STR_SZ,
7441 "SAS PHY Link Status: Phy=%d:"
7442 " Phy Disabled",PhyNumber);
7443 break;
7444 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7445 snprintf(evStr, EVENT_DESCR_STR_SZ,
7446 "SAS PHY Link Status: Phy=%d:"
7447 " Failed Speed Nego",PhyNumber);
7448 break;
7449 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7450 snprintf(evStr, EVENT_DESCR_STR_SZ,
7451 "SAS PHY Link Status: Phy=%d:"
7452 " Sata OOB Completed",PhyNumber);
7453 break;
7454 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7455 snprintf(evStr, EVENT_DESCR_STR_SZ,
7456 "SAS PHY Link Status: Phy=%d:"
7457 " Rate 1.5 Gbps",PhyNumber);
7458 break;
7459 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7460 snprintf(evStr, EVENT_DESCR_STR_SZ,
7461 "SAS PHY Link Status: Phy=%d:"
7462 " Rate 3.0 Gbps", PhyNumber);
7463 break;
7464 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7465 snprintf(evStr, EVENT_DESCR_STR_SZ,
7466 "SAS PHY Link Status: Phy=%d:"
7467 " Rate 6.0 Gbps", PhyNumber);
7468 break;
7469 default:
7470 snprintf(evStr, EVENT_DESCR_STR_SZ,
7471 "SAS PHY Link Status: Phy=%d", PhyNumber);
7472 break;
7473 }
7474 break;
7475 }
7476 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7477 ds = "SAS Discovery Error";
7478 break;
7479 case MPI_EVENT_IR_RESYNC_UPDATE:
7480 {
7481 u8 resync_complete = (u8)(evData0 >> 16);
7482 snprintf(evStr, EVENT_DESCR_STR_SZ,
7483 "IR Resync Update: Complete = %d:",resync_complete);
7484 break;
7485 }
7486 case MPI_EVENT_IR2:
7487 {
7488 u8 id = (u8)(evData0);
7489 u8 channel = (u8)(evData0 >> 8);
7490 u8 phys_num = (u8)(evData0 >> 24);
7491 u8 ReasonCode = (u8)(evData0 >> 16);
7492
7493 switch (ReasonCode) {
7494 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7495 snprintf(evStr, EVENT_DESCR_STR_SZ,
7496 "IR2: LD State Changed: "
7497 "id=%d channel=%d phys_num=%d",
7498 id, channel, phys_num);
7499 break;
7500 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7501 snprintf(evStr, EVENT_DESCR_STR_SZ,
7502 "IR2: PD State Changed "
7503 "id=%d channel=%d phys_num=%d",
7504 id, channel, phys_num);
7505 break;
7506 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7507 snprintf(evStr, EVENT_DESCR_STR_SZ,
7508 "IR2: Bad Block Table Full: "
7509 "id=%d channel=%d phys_num=%d",
7510 id, channel, phys_num);
7511 break;
7512 case MPI_EVENT_IR2_RC_PD_INSERTED:
7513 snprintf(evStr, EVENT_DESCR_STR_SZ,
7514 "IR2: PD Inserted: "
7515 "id=%d channel=%d phys_num=%d",
7516 id, channel, phys_num);
7517 break;
7518 case MPI_EVENT_IR2_RC_PD_REMOVED:
7519 snprintf(evStr, EVENT_DESCR_STR_SZ,
7520 "IR2: PD Removed: "
7521 "id=%d channel=%d phys_num=%d",
7522 id, channel, phys_num);
7523 break;
7524 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7525 snprintf(evStr, EVENT_DESCR_STR_SZ,
7526 "IR2: Foreign CFG Detected: "
7527 "id=%d channel=%d phys_num=%d",
7528 id, channel, phys_num);
7529 break;
7530 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7531 snprintf(evStr, EVENT_DESCR_STR_SZ,
7532 "IR2: Rebuild Medium Error: "
7533 "id=%d channel=%d phys_num=%d",
7534 id, channel, phys_num);
7535 break;
7536 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7537 snprintf(evStr, EVENT_DESCR_STR_SZ,
7538 "IR2: Dual Port Added: "
7539 "id=%d channel=%d phys_num=%d",
7540 id, channel, phys_num);
7541 break;
7542 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7543 snprintf(evStr, EVENT_DESCR_STR_SZ,
7544 "IR2: Dual Port Removed: "
7545 "id=%d channel=%d phys_num=%d",
7546 id, channel, phys_num);
7547 break;
7548 default:
7549 ds = "IR2";
7550 break;
7551 }
7552 break;
7553 }
7554 case MPI_EVENT_SAS_DISCOVERY:
7555 {
7556 if (evData0)
7557 ds = "SAS Discovery: Start";
7558 else
7559 ds = "SAS Discovery: Stop";
7560 break;
7561 }
7562 case MPI_EVENT_LOG_ENTRY_ADDED:
7563 ds = "SAS Log Entry Added";
7564 break;
7565
7566 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7567 {
7568 u8 phy_num = (u8)(evData0);
7569 u8 port_num = (u8)(evData0 >> 8);
7570 u8 port_width = (u8)(evData0 >> 16);
7571 u8 primitive = (u8)(evData0 >> 24);
7572 snprintf(evStr, EVENT_DESCR_STR_SZ,
7573 "SAS Broadcast Primitive: phy=%d port=%d "
7574 "width=%d primitive=0x%02x",
7575 phy_num, port_num, port_width, primitive);
7576 break;
7577 }
7578
7579 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7580 {
7581 u8 reason = (u8)(evData0);
7582
7583 switch (reason) {
7584 case MPI_EVENT_SAS_INIT_RC_ADDED:
7585 ds = "SAS Initiator Status Change: Added";
7586 break;
7587 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7588 ds = "SAS Initiator Status Change: Deleted";
7589 break;
7590 default:
7591 ds = "SAS Initiator Status Change";
7592 break;
7593 }
7594 break;
7595 }
7596
7597 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7598 {
7599 u8 max_init = (u8)(evData0);
7600 u8 current_init = (u8)(evData0 >> 8);
7601
7602 snprintf(evStr, EVENT_DESCR_STR_SZ,
7603 "SAS Initiator Device Table Overflow: max initiators=%02d "
7604 "current initiators=%02d",
7605 max_init, current_init);
7606 break;
7607 }
7608 case MPI_EVENT_SAS_SMP_ERROR:
7609 {
7610 u8 status = (u8)(evData0);
7611 u8 port_num = (u8)(evData0 >> 8);
7612 u8 result = (u8)(evData0 >> 16);
7613
7614 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7615 snprintf(evStr, EVENT_DESCR_STR_SZ,
7616 "SAS SMP Error: port=%d result=0x%02x",
7617 port_num, result);
7618 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7619 snprintf(evStr, EVENT_DESCR_STR_SZ,
7620 "SAS SMP Error: port=%d : CRC Error",
7621 port_num);
7622 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7623 snprintf(evStr, EVENT_DESCR_STR_SZ,
7624 "SAS SMP Error: port=%d : Timeout",
7625 port_num);
7626 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7627 snprintf(evStr, EVENT_DESCR_STR_SZ,
7628 "SAS SMP Error: port=%d : No Destination",
7629 port_num);
7630 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7631 snprintf(evStr, EVENT_DESCR_STR_SZ,
7632 "SAS SMP Error: port=%d : Bad Destination",
7633 port_num);
7634 else
7635 snprintf(evStr, EVENT_DESCR_STR_SZ,
7636 "SAS SMP Error: port=%d : status=0x%02x",
7637 port_num, status);
7638 break;
7639 }
7640
7641 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7642 {
7643 u8 reason = (u8)(evData0);
7644
7645 switch (reason) {
7646 case MPI_EVENT_SAS_EXP_RC_ADDED:
7647 ds = "Expander Status Change: Added";
7648 break;
7649 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7650 ds = "Expander Status Change: Deleted";
7651 break;
7652 default:
7653 ds = "Expander Status Change";
7654 break;
7655 }
7656 break;
7657 }
7658
7659 /*
7660 * MPT base "custom" events may be added here...
7661 */
7662 default:
7663 ds = "Unknown";
7664 break;
7665 }
7666 if (ds)
7667 strscpy(evStr, ds, EVENT_DESCR_STR_SZ);
7668
7669
7670 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7671 "MPT event:(%02Xh) : %s\n",
7672 ioc->name, event, evStr));
7673
7674 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7675 ": Event data:\n"));
7676 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7677 devtverboseprintk(ioc, printk(" %08x",
7678 le32_to_cpu(pEventReply->Data[ii])));
7679 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7680 }
7681 #endif
7682 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7683 /**
7684 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7685 * @ioc: Pointer to MPT_ADAPTER structure
7686 * @pEventReply: Pointer to EventNotification reply frame
7687 * @evHandlers: Pointer to integer, number of event handlers
7688 *
7689 * Routes a received EventNotificationReply to all currently registered
7690 * event handlers.
7691 * Returns sum of event handlers return values.
7692 */
7693 static int
ProcessEventNotification(MPT_ADAPTER * ioc,EventNotificationReply_t * pEventReply,int * evHandlers)7694 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7695 {
7696 u16 evDataLen;
7697 u32 evData0 = 0;
7698 int ii;
7699 u8 cb_idx;
7700 int r = 0;
7701 int handlers = 0;
7702 u8 event;
7703
7704 /*
7705 * Do platform normalization of values
7706 */
7707 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7708 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7709 if (evDataLen) {
7710 evData0 = le32_to_cpu(pEventReply->Data[0]);
7711 }
7712
7713 #ifdef CONFIG_FUSION_LOGGING
7714 if (evDataLen)
7715 mpt_display_event_info(ioc, pEventReply);
7716 #endif
7717
7718 /*
7719 * Do general / base driver event processing
7720 */
7721 switch(event) {
7722 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7723 if (evDataLen) {
7724 u8 evState = evData0 & 0xFF;
7725
7726 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7727
7728 /* Update EventState field in cached IocFacts */
7729 if (ioc->facts.Function) {
7730 ioc->facts.EventState = evState;
7731 }
7732 }
7733 break;
7734 case MPI_EVENT_INTEGRATED_RAID:
7735 mptbase_raid_process_event_data(ioc,
7736 (MpiEventDataRaid_t *)pEventReply->Data);
7737 break;
7738 default:
7739 break;
7740 }
7741
7742 /*
7743 * Should this event be logged? Events are written sequentially.
7744 * When buffer is full, start again at the top.
7745 */
7746 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7747 int idx;
7748
7749 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7750
7751 ioc->events[idx].event = event;
7752 ioc->events[idx].eventContext = ioc->eventContext;
7753
7754 for (ii = 0; ii < 2; ii++) {
7755 if (ii < evDataLen)
7756 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7757 else
7758 ioc->events[idx].data[ii] = 0;
7759 }
7760
7761 ioc->eventContext++;
7762 }
7763
7764
7765 /*
7766 * Call each currently registered protocol event handler.
7767 */
7768 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7769 if (MptEvHandlers[cb_idx]) {
7770 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7771 "Routing Event to event handler #%d\n",
7772 ioc->name, cb_idx));
7773 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7774 handlers++;
7775 }
7776 }
7777 /* FIXME? Examine results here? */
7778
7779 /*
7780 * If needed, send (a single) EventAck.
7781 */
7782 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7783 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7784 "EventAck required\n",ioc->name));
7785 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7786 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7787 ioc->name, ii));
7788 }
7789 }
7790
7791 *evHandlers = handlers;
7792 return r;
7793 }
7794
7795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7796 /**
7797 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7798 * @ioc: Pointer to MPT_ADAPTER structure
7799 * @log_info: U32 LogInfo reply word from the IOC
7800 *
7801 * Refer to lsi/mpi_log_fc.h.
7802 */
7803 static void
mpt_fc_log_info(MPT_ADAPTER * ioc,u32 log_info)7804 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7805 {
7806 char *desc = "unknown";
7807
7808 switch (log_info & 0xFF000000) {
7809 case MPI_IOCLOGINFO_FC_INIT_BASE:
7810 desc = "FCP Initiator";
7811 break;
7812 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7813 desc = "FCP Target";
7814 break;
7815 case MPI_IOCLOGINFO_FC_LAN_BASE:
7816 desc = "LAN";
7817 break;
7818 case MPI_IOCLOGINFO_FC_MSG_BASE:
7819 desc = "MPI Message Layer";
7820 break;
7821 case MPI_IOCLOGINFO_FC_LINK_BASE:
7822 desc = "FC Link";
7823 break;
7824 case MPI_IOCLOGINFO_FC_CTX_BASE:
7825 desc = "Context Manager";
7826 break;
7827 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7828 desc = "Invalid Field Offset";
7829 break;
7830 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7831 desc = "State Change Info";
7832 break;
7833 }
7834
7835 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7836 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7837 }
7838
7839 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7840 /**
7841 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7842 * @ioc: Pointer to MPT_ADAPTER structure
7843 * @log_info: U32 LogInfo word from the IOC
7844 *
7845 * Refer to lsi/sp_log.h.
7846 */
7847 static void
mpt_spi_log_info(MPT_ADAPTER * ioc,u32 log_info)7848 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7849 {
7850 u32 info = log_info & 0x00FF0000;
7851 char *desc = "unknown";
7852
7853 switch (info) {
7854 case 0x00010000:
7855 desc = "bug! MID not found";
7856 break;
7857
7858 case 0x00020000:
7859 desc = "Parity Error";
7860 break;
7861
7862 case 0x00030000:
7863 desc = "ASYNC Outbound Overrun";
7864 break;
7865
7866 case 0x00040000:
7867 desc = "SYNC Offset Error";
7868 break;
7869
7870 case 0x00050000:
7871 desc = "BM Change";
7872 break;
7873
7874 case 0x00060000:
7875 desc = "Msg In Overflow";
7876 break;
7877
7878 case 0x00070000:
7879 desc = "DMA Error";
7880 break;
7881
7882 case 0x00080000:
7883 desc = "Outbound DMA Overrun";
7884 break;
7885
7886 case 0x00090000:
7887 desc = "Task Management";
7888 break;
7889
7890 case 0x000A0000:
7891 desc = "Device Problem";
7892 break;
7893
7894 case 0x000B0000:
7895 desc = "Invalid Phase Change";
7896 break;
7897
7898 case 0x000C0000:
7899 desc = "Untagged Table Size";
7900 break;
7901
7902 }
7903
7904 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7905 }
7906
7907 /* strings for sas loginfo */
7908 static char *originator_str[] = {
7909 "IOP", /* 00h */
7910 "PL", /* 01h */
7911 "IR" /* 02h */
7912 };
7913 static char *iop_code_str[] = {
7914 NULL, /* 00h */
7915 "Invalid SAS Address", /* 01h */
7916 NULL, /* 02h */
7917 "Invalid Page", /* 03h */
7918 "Diag Message Error", /* 04h */
7919 "Task Terminated", /* 05h */
7920 "Enclosure Management", /* 06h */
7921 "Target Mode" /* 07h */
7922 };
7923 static char *pl_code_str[] = {
7924 NULL, /* 00h */
7925 "Open Failure", /* 01h */
7926 "Invalid Scatter Gather List", /* 02h */
7927 "Wrong Relative Offset or Frame Length", /* 03h */
7928 "Frame Transfer Error", /* 04h */
7929 "Transmit Frame Connected Low", /* 05h */
7930 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7931 "SATA Read Log Receive Data Error", /* 07h */
7932 "SATA NCQ Fail All Commands After Error", /* 08h */
7933 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7934 "Receive Frame Invalid Message", /* 0Ah */
7935 "Receive Context Message Valid Error", /* 0Bh */
7936 "Receive Frame Current Frame Error", /* 0Ch */
7937 "SATA Link Down", /* 0Dh */
7938 "Discovery SATA Init W IOS", /* 0Eh */
7939 "Config Invalid Page", /* 0Fh */
7940 "Discovery SATA Init Timeout", /* 10h */
7941 "Reset", /* 11h */
7942 "Abort", /* 12h */
7943 "IO Not Yet Executed", /* 13h */
7944 "IO Executed", /* 14h */
7945 "Persistent Reservation Out Not Affiliation "
7946 "Owner", /* 15h */
7947 "Open Transmit DMA Abort", /* 16h */
7948 "IO Device Missing Delay Retry", /* 17h */
7949 "IO Cancelled Due to Receive Error", /* 18h */
7950 NULL, /* 19h */
7951 NULL, /* 1Ah */
7952 NULL, /* 1Bh */
7953 NULL, /* 1Ch */
7954 NULL, /* 1Dh */
7955 NULL, /* 1Eh */
7956 NULL, /* 1Fh */
7957 "Enclosure Management" /* 20h */
7958 };
7959 static char *ir_code_str[] = {
7960 "Raid Action Error", /* 00h */
7961 NULL, /* 00h */
7962 NULL, /* 01h */
7963 NULL, /* 02h */
7964 NULL, /* 03h */
7965 NULL, /* 04h */
7966 NULL, /* 05h */
7967 NULL, /* 06h */
7968 NULL /* 07h */
7969 };
7970 static char *raid_sub_code_str[] = {
7971 NULL, /* 00h */
7972 "Volume Creation Failed: Data Passed too "
7973 "Large", /* 01h */
7974 "Volume Creation Failed: Duplicate Volumes "
7975 "Attempted", /* 02h */
7976 "Volume Creation Failed: Max Number "
7977 "Supported Volumes Exceeded", /* 03h */
7978 "Volume Creation Failed: DMA Error", /* 04h */
7979 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7980 "Volume Creation Failed: Error Reading "
7981 "MFG Page 4", /* 06h */
7982 "Volume Creation Failed: Creating Internal "
7983 "Structures", /* 07h */
7984 NULL, /* 08h */
7985 NULL, /* 09h */
7986 NULL, /* 0Ah */
7987 NULL, /* 0Bh */
7988 NULL, /* 0Ch */
7989 NULL, /* 0Dh */
7990 NULL, /* 0Eh */
7991 NULL, /* 0Fh */
7992 "Activation failed: Already Active Volume", /* 10h */
7993 "Activation failed: Unsupported Volume Type", /* 11h */
7994 "Activation failed: Too Many Active Volumes", /* 12h */
7995 "Activation failed: Volume ID in Use", /* 13h */
7996 "Activation failed: Reported Failure", /* 14h */
7997 "Activation failed: Importing a Volume", /* 15h */
7998 NULL, /* 16h */
7999 NULL, /* 17h */
8000 NULL, /* 18h */
8001 NULL, /* 19h */
8002 NULL, /* 1Ah */
8003 NULL, /* 1Bh */
8004 NULL, /* 1Ch */
8005 NULL, /* 1Dh */
8006 NULL, /* 1Eh */
8007 NULL, /* 1Fh */
8008 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8009 "Phys Disk failed: Data Passed too Large", /* 21h */
8010 "Phys Disk failed: DMA Error", /* 22h */
8011 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8012 "Phys Disk failed: Creating Phys Disk Config "
8013 "Page", /* 24h */
8014 NULL, /* 25h */
8015 NULL, /* 26h */
8016 NULL, /* 27h */
8017 NULL, /* 28h */
8018 NULL, /* 29h */
8019 NULL, /* 2Ah */
8020 NULL, /* 2Bh */
8021 NULL, /* 2Ch */
8022 NULL, /* 2Dh */
8023 NULL, /* 2Eh */
8024 NULL, /* 2Fh */
8025 "Compatibility Error: IR Disabled", /* 30h */
8026 "Compatibility Error: Inquiry Command Failed", /* 31h */
8027 "Compatibility Error: Device not Direct Access "
8028 "Device ", /* 32h */
8029 "Compatibility Error: Removable Device Found", /* 33h */
8030 "Compatibility Error: Device SCSI Version not "
8031 "2 or Higher", /* 34h */
8032 "Compatibility Error: SATA Device, 48 BIT LBA "
8033 "not Supported", /* 35h */
8034 "Compatibility Error: Device doesn't have "
8035 "512 Byte Block Sizes", /* 36h */
8036 "Compatibility Error: Volume Type Check Failed", /* 37h */
8037 "Compatibility Error: Volume Type is "
8038 "Unsupported by FW", /* 38h */
8039 "Compatibility Error: Disk Drive too Small for "
8040 "use in Volume", /* 39h */
8041 "Compatibility Error: Phys Disk for Create "
8042 "Volume not Found", /* 3Ah */
8043 "Compatibility Error: Too Many or too Few "
8044 "Disks for Volume Type", /* 3Bh */
8045 "Compatibility Error: Disk stripe Sizes "
8046 "Must be 64KB", /* 3Ch */
8047 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8048 };
8049
8050 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8051 /**
8052 * mpt_sas_log_info - Log information returned from SAS IOC.
8053 * @ioc: Pointer to MPT_ADAPTER structure
8054 * @log_info: U32 LogInfo reply word from the IOC
8055 * @cb_idx: callback function's handle
8056 *
8057 * Refer to lsi/mpi_log_sas.h.
8058 **/
8059 static void
mpt_sas_log_info(MPT_ADAPTER * ioc,u32 log_info,u8 cb_idx)8060 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8061 {
8062 union loginfo_type {
8063 u32 loginfo;
8064 struct {
8065 u32 subcode:16;
8066 u32 code:8;
8067 u32 originator:4;
8068 u32 bus_type:4;
8069 } dw;
8070 };
8071 union loginfo_type sas_loginfo;
8072 char *originator_desc = NULL;
8073 char *code_desc = NULL;
8074 char *sub_code_desc = NULL;
8075
8076 sas_loginfo.loginfo = log_info;
8077 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8078 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8079 return;
8080
8081 originator_desc = originator_str[sas_loginfo.dw.originator];
8082
8083 switch (sas_loginfo.dw.originator) {
8084
8085 case 0: /* IOP */
8086 if (sas_loginfo.dw.code <
8087 ARRAY_SIZE(iop_code_str))
8088 code_desc = iop_code_str[sas_loginfo.dw.code];
8089 break;
8090 case 1: /* PL */
8091 if (sas_loginfo.dw.code <
8092 ARRAY_SIZE(pl_code_str))
8093 code_desc = pl_code_str[sas_loginfo.dw.code];
8094 break;
8095 case 2: /* IR */
8096 if (sas_loginfo.dw.code >=
8097 ARRAY_SIZE(ir_code_str))
8098 break;
8099 code_desc = ir_code_str[sas_loginfo.dw.code];
8100 if (sas_loginfo.dw.subcode >=
8101 ARRAY_SIZE(raid_sub_code_str))
8102 break;
8103 if (sas_loginfo.dw.code == 0)
8104 sub_code_desc =
8105 raid_sub_code_str[sas_loginfo.dw.subcode];
8106 break;
8107 default:
8108 return;
8109 }
8110
8111 if (sub_code_desc != NULL)
8112 printk(MYIOC_s_INFO_FMT
8113 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8114 " SubCode={%s} cb_idx %s\n",
8115 ioc->name, log_info, originator_desc, code_desc,
8116 sub_code_desc, MptCallbacksName[cb_idx]);
8117 else if (code_desc != NULL)
8118 printk(MYIOC_s_INFO_FMT
8119 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8120 " SubCode(0x%04x) cb_idx %s\n",
8121 ioc->name, log_info, originator_desc, code_desc,
8122 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8123 else
8124 printk(MYIOC_s_INFO_FMT
8125 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8126 " SubCode(0x%04x) cb_idx %s\n",
8127 ioc->name, log_info, originator_desc,
8128 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8129 MptCallbacksName[cb_idx]);
8130 }
8131
8132 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8133 /**
8134 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8135 * @ioc: Pointer to MPT_ADAPTER structure
8136 * @ioc_status: U32 IOCStatus word from IOC
8137 * @mf: Pointer to MPT request frame
8138 *
8139 * Refer to lsi/mpi.h.
8140 **/
8141 static void
mpt_iocstatus_info_config(MPT_ADAPTER * ioc,u32 ioc_status,MPT_FRAME_HDR * mf)8142 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8143 {
8144 Config_t *pReq = (Config_t *)mf;
8145 char extend_desc[EVENT_DESCR_STR_SZ];
8146 char *desc = NULL;
8147 u32 form;
8148 u8 page_type;
8149
8150 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8151 page_type = pReq->ExtPageType;
8152 else
8153 page_type = pReq->Header.PageType;
8154
8155 /*
8156 * ignore invalid page messages for GET_NEXT_HANDLE
8157 */
8158 form = le32_to_cpu(pReq->PageAddress);
8159 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8160 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8161 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8162 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8163 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8164 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8165 return;
8166 }
8167 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8168 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8169 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8170 return;
8171 }
8172
8173 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8174 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8175 page_type, pReq->Header.PageNumber, pReq->Action, form);
8176
8177 switch (ioc_status) {
8178
8179 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8180 desc = "Config Page Invalid Action";
8181 break;
8182
8183 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8184 desc = "Config Page Invalid Type";
8185 break;
8186
8187 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8188 desc = "Config Page Invalid Page";
8189 break;
8190
8191 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8192 desc = "Config Page Invalid Data";
8193 break;
8194
8195 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8196 desc = "Config Page No Defaults";
8197 break;
8198
8199 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8200 desc = "Config Page Can't Commit";
8201 break;
8202 }
8203
8204 if (!desc)
8205 return;
8206
8207 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8208 ioc->name, ioc_status, desc, extend_desc));
8209 }
8210
8211 /**
8212 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8213 * @ioc: Pointer to MPT_ADAPTER structure
8214 * @ioc_status: U32 IOCStatus word from IOC
8215 * @mf: Pointer to MPT request frame
8216 *
8217 * Refer to lsi/mpi.h.
8218 **/
8219 static void
mpt_iocstatus_info(MPT_ADAPTER * ioc,u32 ioc_status,MPT_FRAME_HDR * mf)8220 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8221 {
8222 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8223 char *desc = NULL;
8224
8225 switch (status) {
8226
8227 /****************************************************************************/
8228 /* Common IOCStatus values for all replies */
8229 /****************************************************************************/
8230
8231 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8232 desc = "Invalid Function";
8233 break;
8234
8235 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8236 desc = "Busy";
8237 break;
8238
8239 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8240 desc = "Invalid SGL";
8241 break;
8242
8243 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8244 desc = "Internal Error";
8245 break;
8246
8247 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8248 desc = "Reserved";
8249 break;
8250
8251 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8252 desc = "Insufficient Resources";
8253 break;
8254
8255 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8256 desc = "Invalid Field";
8257 break;
8258
8259 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8260 desc = "Invalid State";
8261 break;
8262
8263 /****************************************************************************/
8264 /* Config IOCStatus values */
8265 /****************************************************************************/
8266
8267 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8268 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8269 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8270 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8271 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8272 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8273 mpt_iocstatus_info_config(ioc, status, mf);
8274 break;
8275
8276 /****************************************************************************/
8277 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8278 /* */
8279 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8280 /* */
8281 /****************************************************************************/
8282
8283 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8284 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8285 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8286 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8287 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8288 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8289 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8290 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8291 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8292 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8293 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8294 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8295 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8296 break;
8297
8298 /****************************************************************************/
8299 /* SCSI Target values */
8300 /****************************************************************************/
8301
8302 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8303 desc = "Target: Priority IO";
8304 break;
8305
8306 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8307 desc = "Target: Invalid Port";
8308 break;
8309
8310 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8311 desc = "Target Invalid IO Index:";
8312 break;
8313
8314 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8315 desc = "Target: Aborted";
8316 break;
8317
8318 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8319 desc = "Target: No Conn Retryable";
8320 break;
8321
8322 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8323 desc = "Target: No Connection";
8324 break;
8325
8326 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8327 desc = "Target: Transfer Count Mismatch";
8328 break;
8329
8330 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8331 desc = "Target: STS Data not Sent";
8332 break;
8333
8334 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8335 desc = "Target: Data Offset Error";
8336 break;
8337
8338 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8339 desc = "Target: Too Much Write Data";
8340 break;
8341
8342 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8343 desc = "Target: IU Too Short";
8344 break;
8345
8346 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8347 desc = "Target: ACK NAK Timeout";
8348 break;
8349
8350 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8351 desc = "Target: Nak Received";
8352 break;
8353
8354 /****************************************************************************/
8355 /* Fibre Channel Direct Access values */
8356 /****************************************************************************/
8357
8358 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8359 desc = "FC: Aborted";
8360 break;
8361
8362 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8363 desc = "FC: RX ID Invalid";
8364 break;
8365
8366 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8367 desc = "FC: DID Invalid";
8368 break;
8369
8370 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8371 desc = "FC: Node Logged Out";
8372 break;
8373
8374 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8375 desc = "FC: Exchange Canceled";
8376 break;
8377
8378 /****************************************************************************/
8379 /* LAN values */
8380 /****************************************************************************/
8381
8382 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8383 desc = "LAN: Device not Found";
8384 break;
8385
8386 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8387 desc = "LAN: Device Failure";
8388 break;
8389
8390 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8391 desc = "LAN: Transmit Error";
8392 break;
8393
8394 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8395 desc = "LAN: Transmit Aborted";
8396 break;
8397
8398 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8399 desc = "LAN: Receive Error";
8400 break;
8401
8402 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8403 desc = "LAN: Receive Aborted";
8404 break;
8405
8406 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8407 desc = "LAN: Partial Packet";
8408 break;
8409
8410 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8411 desc = "LAN: Canceled";
8412 break;
8413
8414 /****************************************************************************/
8415 /* Serial Attached SCSI values */
8416 /****************************************************************************/
8417
8418 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8419 desc = "SAS: SMP Request Failed";
8420 break;
8421
8422 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8423 desc = "SAS: SMP Data Overrun";
8424 break;
8425
8426 default:
8427 desc = "Others";
8428 break;
8429 }
8430
8431 if (!desc)
8432 return;
8433
8434 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8435 ioc->name, status, desc));
8436 }
8437
8438 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8439 EXPORT_SYMBOL(mpt_attach);
8440 EXPORT_SYMBOL(mpt_detach);
8441 #ifdef CONFIG_PM
8442 EXPORT_SYMBOL(mpt_resume);
8443 EXPORT_SYMBOL(mpt_suspend);
8444 #endif
8445 EXPORT_SYMBOL(ioc_list);
8446 EXPORT_SYMBOL(mpt_register);
8447 EXPORT_SYMBOL(mpt_deregister);
8448 EXPORT_SYMBOL(mpt_event_register);
8449 EXPORT_SYMBOL(mpt_event_deregister);
8450 EXPORT_SYMBOL(mpt_reset_register);
8451 EXPORT_SYMBOL(mpt_reset_deregister);
8452 EXPORT_SYMBOL(mpt_device_driver_register);
8453 EXPORT_SYMBOL(mpt_device_driver_deregister);
8454 EXPORT_SYMBOL(mpt_get_msg_frame);
8455 EXPORT_SYMBOL(mpt_put_msg_frame);
8456 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8457 EXPORT_SYMBOL(mpt_free_msg_frame);
8458 EXPORT_SYMBOL(mpt_send_handshake_request);
8459 EXPORT_SYMBOL(mpt_verify_adapter);
8460 EXPORT_SYMBOL(mpt_GetIocState);
8461 EXPORT_SYMBOL(mpt_print_ioc_summary);
8462 EXPORT_SYMBOL(mpt_HardResetHandler);
8463 EXPORT_SYMBOL(mpt_config);
8464 EXPORT_SYMBOL(mpt_findImVolumes);
8465 EXPORT_SYMBOL(mpt_alloc_fw_memory);
8466 EXPORT_SYMBOL(mpt_free_fw_memory);
8467 EXPORT_SYMBOL(mptbase_sas_persist_operation);
8468 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8469
8470 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8471 /**
8472 * fusion_init - Fusion MPT base driver initialization routine.
8473 *
8474 * Returns 0 for success, non-zero for failure.
8475 */
8476 static int __init
fusion_init(void)8477 fusion_init(void)
8478 {
8479 u8 cb_idx;
8480
8481 show_mptmod_ver(my_NAME, my_VERSION);
8482 printk(KERN_INFO COPYRIGHT "\n");
8483
8484 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8485 MptCallbacks[cb_idx] = NULL;
8486 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8487 MptEvHandlers[cb_idx] = NULL;
8488 MptResetHandlers[cb_idx] = NULL;
8489 }
8490
8491 /* Register ourselves (mptbase) in order to facilitate
8492 * EventNotification handling.
8493 */
8494 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8495 "mptbase_reply");
8496
8497 /* Register for hard reset handling callbacks.
8498 */
8499 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8500
8501 #ifdef CONFIG_PROC_FS
8502 (void) procmpt_create();
8503 #endif
8504 return 0;
8505 }
8506
8507 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8508 /**
8509 * fusion_exit - Perform driver unload cleanup.
8510 *
8511 * This routine frees all resources associated with each MPT adapter
8512 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8513 */
8514 static void __exit
fusion_exit(void)8515 fusion_exit(void)
8516 {
8517
8518 mpt_reset_deregister(mpt_base_index);
8519
8520 #ifdef CONFIG_PROC_FS
8521 procmpt_destroy();
8522 #endif
8523 }
8524
8525 module_init(fusion_init);
8526 module_exit(fusion_exit);
8527