1 /* 2 * TI AEMIF driver 3 * 4 * Copyright (C) 2010 - 2013 Texas Instruments Incorporated. http://www.ti.com/ 5 * 6 * Authors: 7 * Murali Karicheri <m-karicheri2@ti.com> 8 * Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 */ 14 15 #include <linux/clk.h> 16 #include <linux/err.h> 17 #include <linux/io.h> 18 #include <linux/kernel.h> 19 #include <linux/module.h> 20 #include <linux/of.h> 21 #include <linux/of_platform.h> 22 #include <linux/platform_device.h> 23 24 #define TA_SHIFT 2 25 #define RHOLD_SHIFT 4 26 #define RSTROBE_SHIFT 7 27 #define RSETUP_SHIFT 13 28 #define WHOLD_SHIFT 17 29 #define WSTROBE_SHIFT 20 30 #define WSETUP_SHIFT 26 31 #define EW_SHIFT 30 32 #define SS_SHIFT 31 33 34 #define TA(x) ((x) << TA_SHIFT) 35 #define RHOLD(x) ((x) << RHOLD_SHIFT) 36 #define RSTROBE(x) ((x) << RSTROBE_SHIFT) 37 #define RSETUP(x) ((x) << RSETUP_SHIFT) 38 #define WHOLD(x) ((x) << WHOLD_SHIFT) 39 #define WSTROBE(x) ((x) << WSTROBE_SHIFT) 40 #define WSETUP(x) ((x) << WSETUP_SHIFT) 41 #define EW(x) ((x) << EW_SHIFT) 42 #define SS(x) ((x) << SS_SHIFT) 43 44 #define ASIZE_MAX 0x1 45 #define TA_MAX 0x3 46 #define RHOLD_MAX 0x7 47 #define RSTROBE_MAX 0x3f 48 #define RSETUP_MAX 0xf 49 #define WHOLD_MAX 0x7 50 #define WSTROBE_MAX 0x3f 51 #define WSETUP_MAX 0xf 52 #define EW_MAX 0x1 53 #define SS_MAX 0x1 54 #define NUM_CS 4 55 56 #define TA_VAL(x) (((x) & TA(TA_MAX)) >> TA_SHIFT) 57 #define RHOLD_VAL(x) (((x) & RHOLD(RHOLD_MAX)) >> RHOLD_SHIFT) 58 #define RSTROBE_VAL(x) (((x) & RSTROBE(RSTROBE_MAX)) >> RSTROBE_SHIFT) 59 #define RSETUP_VAL(x) (((x) & RSETUP(RSETUP_MAX)) >> RSETUP_SHIFT) 60 #define WHOLD_VAL(x) (((x) & WHOLD(WHOLD_MAX)) >> WHOLD_SHIFT) 61 #define WSTROBE_VAL(x) (((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT) 62 #define WSETUP_VAL(x) (((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT) 63 #define EW_VAL(x) (((x) & EW(EW_MAX)) >> EW_SHIFT) 64 #define SS_VAL(x) (((x) & SS(SS_MAX)) >> SS_SHIFT) 65 66 #define NRCSR_OFFSET 0x00 67 #define AWCCR_OFFSET 0x04 68 #define A1CR_OFFSET 0x10 69 70 #define ACR_ASIZE_MASK 0x3 71 #define ACR_EW_MASK BIT(30) 72 #define ACR_SS_MASK BIT(31) 73 #define ASIZE_16BIT 1 74 75 #define CONFIG_MASK (TA(TA_MAX) | \ 76 RHOLD(RHOLD_MAX) | \ 77 RSTROBE(RSTROBE_MAX) | \ 78 RSETUP(RSETUP_MAX) | \ 79 WHOLD(WHOLD_MAX) | \ 80 WSTROBE(WSTROBE_MAX) | \ 81 WSETUP(WSETUP_MAX) | \ 82 EW(EW_MAX) | SS(SS_MAX) | \ 83 ASIZE_MAX) 84 85 /** 86 * struct aemif_cs_data: structure to hold cs parameters 87 * @cs: chip-select number 88 * @wstrobe: write strobe width, ns 89 * @rstrobe: read strobe width, ns 90 * @wsetup: write setup width, ns 91 * @whold: write hold width, ns 92 * @rsetup: read setup width, ns 93 * @rhold: read hold width, ns 94 * @ta: minimum turn around time, ns 95 * @enable_ss: enable/disable select strobe mode 96 * @enable_ew: enable/disable extended wait mode 97 * @asize: width of the asynchronous device's data bus 98 */ 99 struct aemif_cs_data { 100 u8 cs; 101 u16 wstrobe; 102 u16 rstrobe; 103 u8 wsetup; 104 u8 whold; 105 u8 rsetup; 106 u8 rhold; 107 u8 ta; 108 u8 enable_ss; 109 u8 enable_ew; 110 u8 asize; 111 }; 112 113 /** 114 * struct aemif_device: structure to hold device data 115 * @base: base address of AEMIF registers 116 * @clk: source clock 117 * @clk_rate: clock's rate in kHz 118 * @num_cs: number of assigned chip-selects 119 * @cs_offset: start number of cs nodes 120 * @cs_data: array of chip-select settings 121 */ 122 struct aemif_device { 123 void __iomem *base; 124 struct clk *clk; 125 unsigned long clk_rate; 126 u8 num_cs; 127 int cs_offset; 128 struct aemif_cs_data cs_data[NUM_CS]; 129 }; 130 131 /** 132 * aemif_calc_rate - calculate timing data. 133 * @pdev: platform device to calculate for 134 * @wanted: The cycle time needed in nanoseconds. 135 * @clk: The input clock rate in kHz. 136 * @max: The maximum divider value that can be programmed. 137 * 138 * On success, returns the calculated timing value minus 1 for easy 139 * programming into AEMIF timing registers, else negative errno. 140 */ 141 static int aemif_calc_rate(struct platform_device *pdev, int wanted, 142 unsigned long clk, int max) 143 { 144 int result; 145 146 result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1; 147 148 dev_dbg(&pdev->dev, "%s: result %d from %ld, %d\n", __func__, result, 149 clk, wanted); 150 151 /* It is generally OK to have a more relaxed timing than requested... */ 152 if (result < 0) 153 result = 0; 154 155 /* ... But configuring tighter timings is not an option. */ 156 else if (result > max) 157 result = -EINVAL; 158 159 return result; 160 } 161 162 /** 163 * aemif_config_abus - configure async bus parameters 164 * @pdev: platform device to configure for 165 * @csnum: aemif chip select number 166 * 167 * This function programs the given timing values (in real clock) into the 168 * AEMIF registers taking the AEMIF clock into account. 169 * 170 * This function does not use any locking while programming the AEMIF 171 * because it is expected that there is only one user of a given 172 * chip-select. 173 * 174 * Returns 0 on success, else negative errno. 175 */ 176 static int aemif_config_abus(struct platform_device *pdev, int csnum) 177 { 178 struct aemif_device *aemif = platform_get_drvdata(pdev); 179 struct aemif_cs_data *data = &aemif->cs_data[csnum]; 180 int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup; 181 unsigned long clk_rate = aemif->clk_rate; 182 unsigned offset; 183 u32 set, val; 184 185 offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4; 186 187 ta = aemif_calc_rate(pdev, data->ta, clk_rate, TA_MAX); 188 rhold = aemif_calc_rate(pdev, data->rhold, clk_rate, RHOLD_MAX); 189 rstrobe = aemif_calc_rate(pdev, data->rstrobe, clk_rate, RSTROBE_MAX); 190 rsetup = aemif_calc_rate(pdev, data->rsetup, clk_rate, RSETUP_MAX); 191 whold = aemif_calc_rate(pdev, data->whold, clk_rate, WHOLD_MAX); 192 wstrobe = aemif_calc_rate(pdev, data->wstrobe, clk_rate, WSTROBE_MAX); 193 wsetup = aemif_calc_rate(pdev, data->wsetup, clk_rate, WSETUP_MAX); 194 195 if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 || 196 whold < 0 || wstrobe < 0 || wsetup < 0) { 197 dev_err(&pdev->dev, "%s: cannot get suitable timings\n", 198 __func__); 199 return -EINVAL; 200 } 201 202 set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) | 203 WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup); 204 205 set |= (data->asize & ACR_ASIZE_MASK); 206 if (data->enable_ew) 207 set |= ACR_EW_MASK; 208 if (data->enable_ss) 209 set |= ACR_SS_MASK; 210 211 val = readl(aemif->base + offset); 212 val &= ~CONFIG_MASK; 213 val |= set; 214 writel(val, aemif->base + offset); 215 216 return 0; 217 } 218 219 static inline int aemif_cycles_to_nsec(int val, unsigned long clk_rate) 220 { 221 return ((val + 1) * NSEC_PER_MSEC) / clk_rate; 222 } 223 224 /** 225 * aemif_get_hw_params - function to read hw register values 226 * @pdev: platform device to read for 227 * @csnum: aemif chip select number 228 * 229 * This function reads the defaults from the registers and update 230 * the timing values. Required for get/set commands and also for 231 * the case when driver needs to use defaults in hardware. 232 */ 233 static void aemif_get_hw_params(struct platform_device *pdev, int csnum) 234 { 235 struct aemif_device *aemif = platform_get_drvdata(pdev); 236 struct aemif_cs_data *data = &aemif->cs_data[csnum]; 237 unsigned long clk_rate = aemif->clk_rate; 238 u32 val, offset; 239 240 offset = A1CR_OFFSET + (data->cs - aemif->cs_offset) * 4; 241 val = readl(aemif->base + offset); 242 243 data->ta = aemif_cycles_to_nsec(TA_VAL(val), clk_rate); 244 data->rhold = aemif_cycles_to_nsec(RHOLD_VAL(val), clk_rate); 245 data->rstrobe = aemif_cycles_to_nsec(RSTROBE_VAL(val), clk_rate); 246 data->rsetup = aemif_cycles_to_nsec(RSETUP_VAL(val), clk_rate); 247 data->whold = aemif_cycles_to_nsec(WHOLD_VAL(val), clk_rate); 248 data->wstrobe = aemif_cycles_to_nsec(WSTROBE_VAL(val), clk_rate); 249 data->wsetup = aemif_cycles_to_nsec(WSETUP_VAL(val), clk_rate); 250 data->enable_ew = EW_VAL(val); 251 data->enable_ss = SS_VAL(val); 252 data->asize = val & ASIZE_MAX; 253 } 254 255 /** 256 * of_aemif_parse_abus_config - parse CS configuration from DT 257 * @pdev: platform device to parse for 258 * @np: device node ptr 259 * 260 * This function update the emif async bus configuration based on the values 261 * configured in a cs device binding node. 262 */ 263 static int of_aemif_parse_abus_config(struct platform_device *pdev, 264 struct device_node *np) 265 { 266 struct aemif_device *aemif = platform_get_drvdata(pdev); 267 struct aemif_cs_data *data; 268 u32 cs; 269 u32 val; 270 271 if (of_property_read_u32(np, "ti,cs-chipselect", &cs)) { 272 dev_dbg(&pdev->dev, "cs property is required"); 273 return -EINVAL; 274 } 275 276 if (cs - aemif->cs_offset >= NUM_CS || cs < aemif->cs_offset) { 277 dev_dbg(&pdev->dev, "cs number is incorrect %d", cs); 278 return -EINVAL; 279 } 280 281 if (aemif->num_cs >= NUM_CS) { 282 dev_dbg(&pdev->dev, "cs count is more than %d", NUM_CS); 283 return -EINVAL; 284 } 285 286 data = &aemif->cs_data[aemif->num_cs]; 287 data->cs = cs; 288 289 /* read the current value in the hw register */ 290 aemif_get_hw_params(pdev, aemif->num_cs++); 291 292 /* override the values from device node */ 293 if (!of_property_read_u32(np, "ti,cs-min-turnaround-ns", &val)) 294 data->ta = val; 295 296 if (!of_property_read_u32(np, "ti,cs-read-hold-ns", &val)) 297 data->rhold = val; 298 299 if (!of_property_read_u32(np, "ti,cs-read-strobe-ns", &val)) 300 data->rstrobe = val; 301 302 if (!of_property_read_u32(np, "ti,cs-read-setup-ns", &val)) 303 data->rsetup = val; 304 305 if (!of_property_read_u32(np, "ti,cs-write-hold-ns", &val)) 306 data->whold = val; 307 308 if (!of_property_read_u32(np, "ti,cs-write-strobe-ns", &val)) 309 data->wstrobe = val; 310 311 if (!of_property_read_u32(np, "ti,cs-write-setup-ns", &val)) 312 data->wsetup = val; 313 314 if (!of_property_read_u32(np, "ti,cs-bus-width", &val)) 315 if (val == 16) 316 data->asize = 1; 317 data->enable_ew = of_property_read_bool(np, "ti,cs-extended-wait-mode"); 318 data->enable_ss = of_property_read_bool(np, "ti,cs-select-strobe-mode"); 319 return 0; 320 } 321 322 static const struct of_device_id aemif_of_match[] = { 323 { .compatible = "ti,davinci-aemif", }, 324 { .compatible = "ti,da850-aemif", }, 325 {}, 326 }; 327 328 static int aemif_probe(struct platform_device *pdev) 329 { 330 int i; 331 int ret = -ENODEV; 332 struct resource *res; 333 struct device *dev = &pdev->dev; 334 struct device_node *np = dev->of_node; 335 struct device_node *child_np; 336 struct aemif_device *aemif; 337 338 if (np == NULL) 339 return 0; 340 341 aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL); 342 if (!aemif) 343 return -ENOMEM; 344 345 platform_set_drvdata(pdev, aemif); 346 347 aemif->clk = devm_clk_get(dev, NULL); 348 if (IS_ERR(aemif->clk)) { 349 dev_err(dev, "cannot get clock 'aemif'\n"); 350 return PTR_ERR(aemif->clk); 351 } 352 353 clk_prepare_enable(aemif->clk); 354 aemif->clk_rate = clk_get_rate(aemif->clk) / MSEC_PER_SEC; 355 356 if (of_device_is_compatible(np, "ti,da850-aemif")) 357 aemif->cs_offset = 2; 358 359 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 360 aemif->base = devm_ioremap_resource(dev, res); 361 if (IS_ERR(aemif->base)) { 362 ret = PTR_ERR(aemif->base); 363 goto error; 364 } 365 366 /* 367 * For every controller device node, there is a cs device node that 368 * describe the bus configuration parameters. This functions iterate 369 * over these nodes and update the cs data array. 370 */ 371 for_each_available_child_of_node(np, child_np) { 372 ret = of_aemif_parse_abus_config(pdev, child_np); 373 if (ret < 0) 374 goto error; 375 } 376 377 for (i = 0; i < aemif->num_cs; i++) { 378 ret = aemif_config_abus(pdev, i); 379 if (ret < 0) { 380 dev_err(dev, "Error configuring chip select %d\n", 381 aemif->cs_data[i].cs); 382 goto error; 383 } 384 } 385 386 /* 387 * Create a child devices explicitly from here to 388 * guarantee that the child will be probed after the AEMIF timing 389 * parameters are set. 390 */ 391 for_each_available_child_of_node(np, child_np) { 392 ret = of_platform_populate(child_np, NULL, NULL, dev); 393 if (ret < 0) 394 goto error; 395 } 396 397 return 0; 398 error: 399 clk_disable_unprepare(aemif->clk); 400 return ret; 401 } 402 403 static int aemif_remove(struct platform_device *pdev) 404 { 405 struct aemif_device *aemif = platform_get_drvdata(pdev); 406 407 clk_disable_unprepare(aemif->clk); 408 return 0; 409 } 410 411 static struct platform_driver aemif_driver = { 412 .probe = aemif_probe, 413 .remove = aemif_remove, 414 .driver = { 415 .name = KBUILD_MODNAME, 416 .owner = THIS_MODULE, 417 .of_match_table = of_match_ptr(aemif_of_match), 418 }, 419 }; 420 421 module_platform_driver(aemif_driver); 422 423 MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>"); 424 MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>"); 425 MODULE_DESCRIPTION("Texas Instruments AEMIF driver"); 426 MODULE_LICENSE("GPL v2"); 427 MODULE_ALIAS("platform:" KBUILD_MODNAME); 428