xref: /linux/drivers/media/usb/gspca/stv06xx/stv06xx.h (revision a4eb44a6435d6d8f9e642407a4a06f65eb90ca04)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
4  *		      Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
5  * Copyright (c) 2002, 2003 Tuukka Toivonen
6  * Copyright (c) 2008 Erik Andrén
7  *
8  * P/N 861037:      Sensor HDCS1000        ASIC STV0600
9  * P/N 861050-0010: Sensor HDCS1000        ASIC STV0600
10  * P/N 861050-0020: Sensor Photobit PB100  ASIC STV0600-1 - QuickCam Express
11  * P/N 861055:      Sensor ST VV6410       ASIC STV0610   - LEGO cam
12  * P/N 861075-0040: Sensor HDCS1000        ASIC
13  * P/N 961179-0700: Sensor ST VV6410       ASIC STV0602   - Dexxa WebCam USB
14  * P/N 861040-0000: Sensor ST VV6410       ASIC STV0610   - QuickCam Web
15  */
16 
17 #ifndef STV06XX_H_
18 #define STV06XX_H_
19 
20 #include <linux/slab.h>
21 #include "gspca.h"
22 
23 #define MODULE_NAME "STV06xx"
24 
25 #define STV_ISOC_ENDPOINT_ADDR		0x81
26 
27 #define STV_R                           0x0509
28 
29 #define STV_REG23			0x0423
30 
31 /* Control registers of the STV0600 ASIC */
32 #define STV_I2C_PARTNER			0x1420
33 #define STV_I2C_VAL_REG_VAL_PAIRS_MIN1	0x1421
34 #define STV_I2C_READ_WRITE_TOGGLE	0x1422
35 #define STV_I2C_FLUSH			0x1423
36 #define STV_I2C_SUCC_READ_REG_VALS	0x1424
37 
38 #define STV_ISO_ENABLE			0x1440
39 #define STV_SCAN_RATE			0x1443
40 #define STV_LED_CTRL			0x1445
41 #define STV_STV0600_EMULATION		0x1446
42 #define STV_REG00			0x1500
43 #define STV_REG01			0x1501
44 #define STV_REG02			0x1502
45 #define STV_REG03			0x1503
46 #define STV_REG04			0x1504
47 
48 #define STV_ISO_SIZE_L			0x15c1
49 #define STV_ISO_SIZE_H			0x15c2
50 
51 /* Refers to the CIF 352x288 and QCIF 176x144 */
52 /* 1: 288 lines, 2: 144 lines */
53 #define STV_Y_CTRL			0x15c3
54 
55 #define STV_RESET                       0x1620
56 
57 /* 0xa: 352 columns, 0x6: 176 columns */
58 #define STV_X_CTRL			0x1680
59 
60 #define STV06XX_URB_MSG_TIMEOUT		5000
61 
62 #define I2C_MAX_BYTES			16
63 #define I2C_MAX_WORDS			8
64 
65 #define I2C_BUFFER_LENGTH		0x23
66 #define I2C_READ_CMD			3
67 #define I2C_WRITE_CMD			1
68 
69 #define LED_ON				1
70 #define LED_OFF				0
71 
72 /* STV06xx device descriptor */
73 struct sd {
74 	struct gspca_dev gspca_dev;
75 
76 	/* A pointer to the currently connected sensor */
77 	const struct stv06xx_sensor *sensor;
78 
79 	/* Sensor private data */
80 	void *sensor_priv;
81 
82 	/* The first 4 lines produced by the stv6422 are no good, this keeps
83 	   track of how many bytes we still need to skip during a frame */
84 	int to_skip;
85 
86 	/* Bridge / Camera type */
87 	u8 bridge;
88 	#define BRIDGE_STV600 0
89 	#define BRIDGE_STV602 1
90 	#define BRIDGE_STV610 2
91 	#define BRIDGE_ST6422 3 /* With integrated sensor */
92 };
93 
94 int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data);
95 int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data);
96 
97 int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len);
98 int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len);
99 
100 int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value);
101 int stv06xx_write_sensor(struct sd *sd, u8 address, u16 value);
102 
103 #endif
104