1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher 4 * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland 5 * Copyright (c) 2002, 2003 Tuukka Toivonen 6 * Copyright (c) 2008 Erik Andrén 7 * 8 * P/N 861037: Sensor HDCS1000 ASIC STV0600 9 * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 10 * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express 11 * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam 12 * P/N 861075-0040: Sensor HDCS1000 ASIC 13 * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB 14 * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web 15 */ 16 17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 18 19 #include <linux/input.h> 20 #include "stv06xx_sensor.h" 21 22 MODULE_AUTHOR("Erik Andrén"); 23 MODULE_DESCRIPTION("STV06XX USB Camera Driver"); 24 MODULE_LICENSE("GPL"); 25 26 static bool dump_bridge; 27 static bool dump_sensor; 28 29 int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data) 30 { 31 int err; 32 struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; 33 struct usb_device *udev = sd->gspca_dev.dev; 34 __u8 *buf = sd->gspca_dev.usb_buf; 35 36 u8 len = (i2c_data > 0xff) ? 2 : 1; 37 38 buf[0] = i2c_data & 0xff; 39 buf[1] = (i2c_data >> 8) & 0xff; 40 41 err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 42 0x04, 0x40, address, 0, buf, len, 43 STV06XX_URB_MSG_TIMEOUT); 44 45 gspca_dbg(gspca_dev, D_CONF, "Written 0x%x to address 0x%x, status: %d\n", 46 i2c_data, address, err); 47 48 return (err < 0) ? err : 0; 49 } 50 51 int stv06xx_read_bridge(struct sd *sd, u16 address, u8 *i2c_data) 52 { 53 int err; 54 struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; 55 struct usb_device *udev = sd->gspca_dev.dev; 56 __u8 *buf = sd->gspca_dev.usb_buf; 57 58 err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 59 0x04, 0xc0, address, 0, buf, 1, 60 STV06XX_URB_MSG_TIMEOUT); 61 62 *i2c_data = buf[0]; 63 64 gspca_dbg(gspca_dev, D_CONF, "Reading 0x%x from address 0x%x, status %d\n", 65 *i2c_data, address, err); 66 67 return (err < 0) ? err : 0; 68 } 69 70 /* Wraps the normal write sensor bytes / words functions for writing a 71 single value */ 72 int stv06xx_write_sensor(struct sd *sd, u8 address, u16 value) 73 { 74 if (sd->sensor->i2c_len == 2) { 75 u16 data[2] = { address, value }; 76 return stv06xx_write_sensor_words(sd, data, 1); 77 } else { 78 u8 data[2] = { address, value }; 79 return stv06xx_write_sensor_bytes(sd, data, 1); 80 } 81 } 82 83 static int stv06xx_write_sensor_finish(struct sd *sd) 84 { 85 int err = 0; 86 87 if (sd->bridge == BRIDGE_STV610) { 88 struct usb_device *udev = sd->gspca_dev.dev; 89 __u8 *buf = sd->gspca_dev.usb_buf; 90 91 buf[0] = 0; 92 err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 93 0x04, 0x40, 0x1704, 0, buf, 1, 94 STV06XX_URB_MSG_TIMEOUT); 95 } 96 97 return (err < 0) ? err : 0; 98 } 99 100 int stv06xx_write_sensor_bytes(struct sd *sd, const u8 *data, u8 len) 101 { 102 int err, i, j; 103 struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; 104 struct usb_device *udev = sd->gspca_dev.dev; 105 __u8 *buf = sd->gspca_dev.usb_buf; 106 107 gspca_dbg(gspca_dev, D_CONF, "I2C: Command buffer contains %d entries\n", 108 len); 109 for (i = 0; i < len;) { 110 /* Build the command buffer */ 111 memset(buf, 0, I2C_BUFFER_LENGTH); 112 for (j = 0; j < I2C_MAX_BYTES && i < len; j++, i++) { 113 buf[j] = data[2*i]; 114 buf[0x10 + j] = data[2*i+1]; 115 gspca_dbg(gspca_dev, D_CONF, "I2C: Writing 0x%02x to reg 0x%02x\n", 116 data[2*i+1], data[2*i]); 117 } 118 buf[0x20] = sd->sensor->i2c_addr; 119 buf[0x21] = j - 1; /* Number of commands to send - 1 */ 120 buf[0x22] = I2C_WRITE_CMD; 121 err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 122 0x04, 0x40, 0x0400, 0, buf, 123 I2C_BUFFER_LENGTH, 124 STV06XX_URB_MSG_TIMEOUT); 125 if (err < 0) 126 return err; 127 } 128 return stv06xx_write_sensor_finish(sd); 129 } 130 131 int stv06xx_write_sensor_words(struct sd *sd, const u16 *data, u8 len) 132 { 133 int err, i, j; 134 struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; 135 struct usb_device *udev = sd->gspca_dev.dev; 136 __u8 *buf = sd->gspca_dev.usb_buf; 137 138 gspca_dbg(gspca_dev, D_CONF, "I2C: Command buffer contains %d entries\n", 139 len); 140 141 for (i = 0; i < len;) { 142 /* Build the command buffer */ 143 memset(buf, 0, I2C_BUFFER_LENGTH); 144 for (j = 0; j < I2C_MAX_WORDS && i < len; j++, i++) { 145 buf[j] = data[2*i]; 146 buf[0x10 + j * 2] = data[2*i+1]; 147 buf[0x10 + j * 2 + 1] = data[2*i+1] >> 8; 148 gspca_dbg(gspca_dev, D_CONF, "I2C: Writing 0x%04x to reg 0x%02x\n", 149 data[2*i+1], data[2*i]); 150 } 151 buf[0x20] = sd->sensor->i2c_addr; 152 buf[0x21] = j - 1; /* Number of commands to send - 1 */ 153 buf[0x22] = I2C_WRITE_CMD; 154 err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 155 0x04, 0x40, 0x0400, 0, buf, 156 I2C_BUFFER_LENGTH, 157 STV06XX_URB_MSG_TIMEOUT); 158 if (err < 0) 159 return err; 160 } 161 return stv06xx_write_sensor_finish(sd); 162 } 163 164 int stv06xx_read_sensor(struct sd *sd, const u8 address, u16 *value) 165 { 166 int err; 167 struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; 168 struct usb_device *udev = sd->gspca_dev.dev; 169 __u8 *buf = sd->gspca_dev.usb_buf; 170 171 err = stv06xx_write_bridge(sd, STV_I2C_FLUSH, sd->sensor->i2c_flush); 172 if (err < 0) 173 return err; 174 175 /* Clear mem */ 176 memset(buf, 0, I2C_BUFFER_LENGTH); 177 178 buf[0] = address; 179 buf[0x20] = sd->sensor->i2c_addr; 180 buf[0x21] = 0; 181 182 /* Read I2C register */ 183 buf[0x22] = I2C_READ_CMD; 184 185 err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 186 0x04, 0x40, 0x1400, 0, buf, I2C_BUFFER_LENGTH, 187 STV06XX_URB_MSG_TIMEOUT); 188 if (err < 0) { 189 pr_err("I2C: Read error writing address: %d\n", err); 190 return err; 191 } 192 193 err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 194 0x04, 0xc0, 0x1410, 0, buf, sd->sensor->i2c_len, 195 STV06XX_URB_MSG_TIMEOUT); 196 if (sd->sensor->i2c_len == 2) 197 *value = buf[0] | (buf[1] << 8); 198 else 199 *value = buf[0]; 200 201 gspca_dbg(gspca_dev, D_CONF, "I2C: Read 0x%x from address 0x%x, status: %d\n", 202 *value, address, err); 203 204 return (err < 0) ? err : 0; 205 } 206 207 /* Dumps all bridge registers */ 208 static void stv06xx_dump_bridge(struct sd *sd) 209 { 210 int i; 211 u8 data, buf; 212 213 pr_info("Dumping all stv06xx bridge registers\n"); 214 for (i = 0x1400; i < 0x160f; i++) { 215 stv06xx_read_bridge(sd, i, &data); 216 217 pr_info("Read 0x%x from address 0x%x\n", data, i); 218 } 219 220 pr_info("Testing stv06xx bridge registers for writability\n"); 221 for (i = 0x1400; i < 0x160f; i++) { 222 stv06xx_read_bridge(sd, i, &data); 223 buf = data; 224 225 stv06xx_write_bridge(sd, i, 0xff); 226 stv06xx_read_bridge(sd, i, &data); 227 if (data == 0xff) 228 pr_info("Register 0x%x is read/write\n", i); 229 else if (data != buf) 230 pr_info("Register 0x%x is read/write, but only partially\n", 231 i); 232 else 233 pr_info("Register 0x%x is read-only\n", i); 234 235 stv06xx_write_bridge(sd, i, buf); 236 } 237 } 238 239 /* this function is called at probe and resume time */ 240 static int stv06xx_init(struct gspca_dev *gspca_dev) 241 { 242 struct sd *sd = (struct sd *) gspca_dev; 243 int err; 244 245 gspca_dbg(gspca_dev, D_PROBE, "Initializing camera\n"); 246 247 /* Let the usb init settle for a bit 248 before performing the initialization */ 249 msleep(250); 250 251 err = sd->sensor->init(sd); 252 253 if (dump_sensor && sd->sensor->dump) 254 sd->sensor->dump(sd); 255 256 return (err < 0) ? err : 0; 257 } 258 259 /* this function is called at probe time */ 260 static int stv06xx_init_controls(struct gspca_dev *gspca_dev) 261 { 262 struct sd *sd = (struct sd *) gspca_dev; 263 264 gspca_dbg(gspca_dev, D_PROBE, "Initializing controls\n"); 265 266 gspca_dev->vdev.ctrl_handler = &gspca_dev->ctrl_handler; 267 return sd->sensor->init_controls(sd); 268 } 269 270 /* Start the camera */ 271 static int stv06xx_start(struct gspca_dev *gspca_dev) 272 { 273 struct sd *sd = (struct sd *) gspca_dev; 274 struct usb_host_interface *alt; 275 struct usb_interface *intf; 276 int err, packet_size; 277 278 intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); 279 alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); 280 if (!alt) { 281 gspca_err(gspca_dev, "Couldn't get altsetting\n"); 282 return -EIO; 283 } 284 285 if (alt->desc.bNumEndpoints < 1) 286 return -ENODEV; 287 288 packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); 289 err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size); 290 if (err < 0) 291 return err; 292 293 /* Prepare the sensor for start */ 294 err = sd->sensor->start(sd); 295 if (err < 0) 296 goto out; 297 298 /* Start isochronous streaming */ 299 err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 1); 300 301 out: 302 if (err < 0) 303 gspca_dbg(gspca_dev, D_STREAM, "Starting stream failed\n"); 304 else 305 gspca_dbg(gspca_dev, D_STREAM, "Started streaming\n"); 306 307 return (err < 0) ? err : 0; 308 } 309 310 static int stv06xx_isoc_init(struct gspca_dev *gspca_dev) 311 { 312 struct usb_interface_cache *intfc; 313 struct usb_host_interface *alt; 314 struct sd *sd = (struct sd *) gspca_dev; 315 316 intfc = gspca_dev->dev->actconfig->intf_cache[0]; 317 318 if (intfc->num_altsetting < 2) 319 return -ENODEV; 320 321 alt = &intfc->altsetting[1]; 322 323 if (alt->desc.bNumEndpoints < 1) 324 return -ENODEV; 325 326 /* Start isoc bandwidth "negotiation" at max isoc bandwidth */ 327 alt->endpoint[0].desc.wMaxPacketSize = 328 cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]); 329 330 return 0; 331 } 332 333 static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev) 334 { 335 int ret, packet_size, min_packet_size; 336 struct usb_host_interface *alt; 337 struct sd *sd = (struct sd *) gspca_dev; 338 339 /* 340 * Existence of altsetting and endpoint was verified in 341 * stv06xx_isoc_init() 342 */ 343 alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1]; 344 packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); 345 min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode]; 346 if (packet_size <= min_packet_size) 347 return -EIO; 348 349 packet_size -= 100; 350 if (packet_size < min_packet_size) 351 packet_size = min_packet_size; 352 alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size); 353 354 ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1); 355 if (ret < 0) 356 gspca_err(gspca_dev, "set alt 1 err %d\n", ret); 357 358 return ret; 359 } 360 361 static void stv06xx_stopN(struct gspca_dev *gspca_dev) 362 { 363 int err; 364 struct sd *sd = (struct sd *) gspca_dev; 365 366 /* stop ISO-streaming */ 367 err = stv06xx_write_bridge(sd, STV_ISO_ENABLE, 0); 368 if (err < 0) 369 goto out; 370 371 err = sd->sensor->stop(sd); 372 373 out: 374 if (err < 0) 375 gspca_dbg(gspca_dev, D_STREAM, "Failed to stop stream\n"); 376 else 377 gspca_dbg(gspca_dev, D_STREAM, "Stopped streaming\n"); 378 } 379 380 /* 381 * Analyse an USB packet of the data stream and store it appropriately. 382 * Each packet contains an integral number of chunks. Each chunk has 383 * 2-bytes identification, followed by 2-bytes that describe the chunk 384 * length. Known/guessed chunk identifications are: 385 * 8001/8005/C001/C005 - Begin new frame 386 * 8002/8006/C002/C006 - End frame 387 * 0200/4200 - Contains actual image data, bayer or compressed 388 * 0005 - 11 bytes of unknown data 389 * 0100 - 2 bytes of unknown data 390 * The 0005 and 0100 chunks seem to appear only in compressed stream. 391 */ 392 static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, 393 u8 *data, /* isoc packet */ 394 int len) /* iso packet length */ 395 { 396 struct sd *sd = (struct sd *) gspca_dev; 397 398 gspca_dbg(gspca_dev, D_PACK, "Packet of length %d arrived\n", len); 399 400 /* A packet may contain several frames 401 loop until the whole packet is reached */ 402 while (len) { 403 int id, chunk_len; 404 405 if (len < 4) { 406 gspca_dbg(gspca_dev, D_PACK, "Packet is smaller than 4 bytes\n"); 407 return; 408 } 409 410 /* Capture the id */ 411 id = (data[0] << 8) | data[1]; 412 413 /* Capture the chunk length */ 414 chunk_len = (data[2] << 8) | data[3]; 415 gspca_dbg(gspca_dev, D_PACK, "Chunk id: %x, length: %d\n", 416 id, chunk_len); 417 418 data += 4; 419 len -= 4; 420 421 if (len < chunk_len) { 422 gspca_err(gspca_dev, "URB packet length is smaller than the specified chunk length\n"); 423 gspca_dev->last_packet_type = DISCARD_PACKET; 424 return; 425 } 426 427 /* First byte seem to be 02=data 2nd byte is unknown??? */ 428 if (sd->bridge == BRIDGE_ST6422 && (id & 0xff00) == 0x0200) 429 goto frame_data; 430 431 switch (id) { 432 case 0x0200: 433 case 0x4200: 434 frame_data: 435 gspca_dbg(gspca_dev, D_PACK, "Frame data packet detected\n"); 436 437 if (sd->to_skip) { 438 int skip = (sd->to_skip < chunk_len) ? 439 sd->to_skip : chunk_len; 440 data += skip; 441 len -= skip; 442 chunk_len -= skip; 443 sd->to_skip -= skip; 444 } 445 446 gspca_frame_add(gspca_dev, INTER_PACKET, 447 data, chunk_len); 448 break; 449 450 case 0x8001: 451 case 0x8005: 452 case 0xc001: 453 case 0xc005: 454 gspca_dbg(gspca_dev, D_PACK, "Starting new frame\n"); 455 456 /* Create a new frame, chunk length should be zero */ 457 gspca_frame_add(gspca_dev, FIRST_PACKET, 458 NULL, 0); 459 460 if (sd->bridge == BRIDGE_ST6422) 461 sd->to_skip = gspca_dev->pixfmt.width * 4; 462 463 if (chunk_len) 464 gspca_err(gspca_dev, "Chunk length is non-zero on a SOF\n"); 465 break; 466 467 case 0x8002: 468 case 0x8006: 469 case 0xc002: 470 gspca_dbg(gspca_dev, D_PACK, "End of frame detected\n"); 471 472 /* Complete the last frame (if any) */ 473 gspca_frame_add(gspca_dev, LAST_PACKET, 474 NULL, 0); 475 476 if (chunk_len) 477 gspca_err(gspca_dev, "Chunk length is non-zero on a EOF\n"); 478 break; 479 480 case 0x0005: 481 gspca_dbg(gspca_dev, D_PACK, "Chunk 0x005 detected\n"); 482 /* Unknown chunk with 11 bytes of data, 483 occurs just before end of each frame 484 in compressed mode */ 485 break; 486 487 case 0x0100: 488 gspca_dbg(gspca_dev, D_PACK, "Chunk 0x0100 detected\n"); 489 /* Unknown chunk with 2 bytes of data, 490 occurs 2-3 times per USB interrupt */ 491 break; 492 case 0x42ff: 493 gspca_dbg(gspca_dev, D_PACK, "Chunk 0x42ff detected\n"); 494 /* Special chunk seen sometimes on the ST6422 */ 495 break; 496 default: 497 gspca_dbg(gspca_dev, D_PACK, "Unknown chunk 0x%04x detected\n", 498 id); 499 /* Unknown chunk */ 500 } 501 data += chunk_len; 502 len -= chunk_len; 503 } 504 } 505 506 #if IS_ENABLED(CONFIG_INPUT) 507 static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, 508 u8 *data, /* interrupt packet data */ 509 int len) /* interrupt packet length */ 510 { 511 int ret = -EINVAL; 512 513 if (len == 1 && (data[0] == 0x80 || data[0] == 0x10)) { 514 input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); 515 input_sync(gspca_dev->input_dev); 516 ret = 0; 517 } 518 519 if (len == 1 && (data[0] == 0x88 || data[0] == 0x11)) { 520 input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); 521 input_sync(gspca_dev->input_dev); 522 ret = 0; 523 } 524 525 return ret; 526 } 527 #endif 528 529 static int stv06xx_config(struct gspca_dev *gspca_dev, 530 const struct usb_device_id *id); 531 532 static void stv06xx_probe_error(struct gspca_dev *gspca_dev) 533 { 534 struct sd *sd = (struct sd *)gspca_dev; 535 536 kfree(sd->sensor_priv); 537 sd->sensor_priv = NULL; 538 } 539 540 /* sub-driver description */ 541 static const struct sd_desc sd_desc = { 542 .name = MODULE_NAME, 543 .config = stv06xx_config, 544 .init = stv06xx_init, 545 .init_controls = stv06xx_init_controls, 546 .probe_error = stv06xx_probe_error, 547 .start = stv06xx_start, 548 .stopN = stv06xx_stopN, 549 .pkt_scan = stv06xx_pkt_scan, 550 .isoc_init = stv06xx_isoc_init, 551 .isoc_nego = stv06xx_isoc_nego, 552 #if IS_ENABLED(CONFIG_INPUT) 553 .int_pkt_scan = sd_int_pkt_scan, 554 #endif 555 }; 556 557 /* This function is called at probe time */ 558 static int stv06xx_config(struct gspca_dev *gspca_dev, 559 const struct usb_device_id *id) 560 { 561 struct sd *sd = (struct sd *) gspca_dev; 562 563 gspca_dbg(gspca_dev, D_PROBE, "Configuring camera\n"); 564 565 sd->bridge = id->driver_info; 566 gspca_dev->sd_desc = &sd_desc; 567 568 if (dump_bridge) 569 stv06xx_dump_bridge(sd); 570 571 sd->sensor = &stv06xx_sensor_st6422; 572 if (!sd->sensor->probe(sd)) 573 return 0; 574 575 sd->sensor = &stv06xx_sensor_vv6410; 576 if (!sd->sensor->probe(sd)) 577 return 0; 578 579 sd->sensor = &stv06xx_sensor_hdcs1x00; 580 if (!sd->sensor->probe(sd)) 581 return 0; 582 583 sd->sensor = &stv06xx_sensor_hdcs1020; 584 if (!sd->sensor->probe(sd)) 585 return 0; 586 587 sd->sensor = &stv06xx_sensor_pb0100; 588 if (!sd->sensor->probe(sd)) 589 return 0; 590 591 sd->sensor = NULL; 592 return -ENODEV; 593 } 594 595 596 597 /* -- module initialisation -- */ 598 static const struct usb_device_id device_table[] = { 599 {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, /* QuickCam Express */ 600 {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, /* LEGO cam / QuickCam Web */ 601 {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, /* Dexxa WebCam USB */ 602 {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger */ 603 {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, /* QuickCam Communicate */ 604 {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger (new) */ 605 {} 606 }; 607 MODULE_DEVICE_TABLE(usb, device_table); 608 609 /* -- device connect -- */ 610 static int sd_probe(struct usb_interface *intf, 611 const struct usb_device_id *id) 612 { 613 return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), 614 THIS_MODULE); 615 } 616 617 static void sd_disconnect(struct usb_interface *intf) 618 { 619 struct gspca_dev *gspca_dev = usb_get_intfdata(intf); 620 struct sd *sd = (struct sd *) gspca_dev; 621 void *priv = sd->sensor_priv; 622 gspca_dbg(gspca_dev, D_PROBE, "Disconnecting the stv06xx device\n"); 623 624 sd->sensor = NULL; 625 gspca_disconnect(intf); 626 kfree(priv); 627 } 628 629 static struct usb_driver sd_driver = { 630 .name = MODULE_NAME, 631 .id_table = device_table, 632 .probe = sd_probe, 633 .disconnect = sd_disconnect, 634 #ifdef CONFIG_PM 635 .suspend = gspca_suspend, 636 .resume = gspca_resume, 637 .reset_resume = gspca_resume, 638 #endif 639 }; 640 641 module_usb_driver(sd_driver); 642 643 module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); 644 MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); 645 646 module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); 647 MODULE_PARM_DESC(dump_sensor, "Dumps all sensor registers at startup"); 648