1 /* 2 * sonix sn9c102 (bayer) library 3 * 4 * Copyright (C) 2009-2011 Jean-François Moine <http://moinejf.free.fr> 5 * Copyright (C) 2003 2004 Michel Xhaard mxhaard@magic.fr 6 * Add Pas106 Stefano Mozzi (C) 2004 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 */ 22 23 /* Some documentation on known sonixb registers: 24 25 Reg Use 26 sn9c101 / sn9c102: 27 0x10 high nibble red gain low nibble blue gain 28 0x11 low nibble green gain 29 sn9c103: 30 0x05 red gain 0-127 31 0x06 blue gain 0-127 32 0x07 green gain 0-127 33 all: 34 0x08-0x0f i2c / 3wire registers 35 0x12 hstart 36 0x13 vstart 37 0x15 hsize (hsize = register-value * 16) 38 0x16 vsize (vsize = register-value * 16) 39 0x17 bit 0 toggle compression quality (according to sn9c102 driver) 40 0x18 bit 7 enables compression, bit 4-5 set image down scaling: 41 00 scale 1, 01 scale 1/2, 10, scale 1/4 42 0x19 high-nibble is sensor clock divider, changes exposure on sensors which 43 use a clock generated by the bridge. Some sensors have their own clock. 44 0x1c auto_exposure area (for avg_lum) startx (startx = register-value * 32) 45 0x1d auto_exposure area (for avg_lum) starty (starty = register-value * 32) 46 0x1e auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32) 47 0x1f auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32) 48 */ 49 50 #define MODULE_NAME "sonixb" 51 52 #include <linux/input.h> 53 #include "gspca.h" 54 55 MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>"); 56 MODULE_DESCRIPTION("GSPCA/SN9C102 USB Camera Driver"); 57 MODULE_LICENSE("GPL"); 58 59 /* specific webcam descriptor */ 60 struct sd { 61 struct gspca_dev gspca_dev; /* !! must be the first item */ 62 63 struct v4l2_ctrl *brightness; 64 struct v4l2_ctrl *plfreq; 65 66 atomic_t avg_lum; 67 int prev_avg_lum; 68 int exposure_knee; 69 int header_read; 70 u8 header[12]; /* Header without sof marker */ 71 72 unsigned char autogain_ignore_frames; 73 unsigned char frames_to_drop; 74 75 __u8 bridge; /* Type of bridge */ 76 #define BRIDGE_101 0 77 #define BRIDGE_102 0 /* We make no difference between 101 and 102 */ 78 #define BRIDGE_103 1 79 80 __u8 sensor; /* Type of image sensor chip */ 81 #define SENSOR_HV7131D 0 82 #define SENSOR_HV7131R 1 83 #define SENSOR_OV6650 2 84 #define SENSOR_OV7630 3 85 #define SENSOR_PAS106 4 86 #define SENSOR_PAS202 5 87 #define SENSOR_TAS5110C 6 88 #define SENSOR_TAS5110D 7 89 #define SENSOR_TAS5130CXX 8 90 __u8 reg11; 91 }; 92 93 typedef const __u8 sensor_init_t[8]; 94 95 struct sensor_data { 96 const __u8 *bridge_init; 97 sensor_init_t *sensor_init; 98 int sensor_init_size; 99 int flags; 100 __u8 sensor_addr; 101 }; 102 103 /* sensor_data flags */ 104 #define F_SIF 0x01 /* sif or vga */ 105 106 /* priv field of struct v4l2_pix_format flags (do not use low nibble!) */ 107 #define MODE_RAW 0x10 /* raw bayer mode */ 108 #define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */ 109 110 #define COMP 0xc7 /* 0x87 //0x07 */ 111 #define COMP1 0xc9 /* 0x89 //0x09 */ 112 113 #define MCK_INIT 0x63 114 #define MCK_INIT1 0x20 /*fixme: Bayer - 0x50 for JPEG ??*/ 115 116 #define SYS_CLK 0x04 117 118 #define SENS(bridge, sensor, _flags, _sensor_addr) \ 119 { \ 120 .bridge_init = bridge, \ 121 .sensor_init = sensor, \ 122 .sensor_init_size = sizeof(sensor), \ 123 .flags = _flags, .sensor_addr = _sensor_addr \ 124 } 125 126 /* We calculate the autogain at the end of the transfer of a frame, at this 127 moment a frame with the old settings is being captured and transmitted. So 128 if we adjust the gain or exposure we must ignore atleast the next frame for 129 the new settings to come into effect before doing any other adjustments. */ 130 #define AUTOGAIN_IGNORE_FRAMES 1 131 132 static const struct v4l2_pix_format vga_mode[] = { 133 {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, 134 .bytesperline = 160, 135 .sizeimage = 160 * 120, 136 .colorspace = V4L2_COLORSPACE_SRGB, 137 .priv = 2 | MODE_RAW}, 138 {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 139 .bytesperline = 160, 140 .sizeimage = 160 * 120 * 5 / 4, 141 .colorspace = V4L2_COLORSPACE_SRGB, 142 .priv = 2}, 143 {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 144 .bytesperline = 320, 145 .sizeimage = 320 * 240 * 5 / 4, 146 .colorspace = V4L2_COLORSPACE_SRGB, 147 .priv = 1}, 148 {640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 149 .bytesperline = 640, 150 .sizeimage = 640 * 480 * 5 / 4, 151 .colorspace = V4L2_COLORSPACE_SRGB, 152 .priv = 0}, 153 }; 154 static const struct v4l2_pix_format sif_mode[] = { 155 {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, 156 .bytesperline = 160, 157 .sizeimage = 160 * 120, 158 .colorspace = V4L2_COLORSPACE_SRGB, 159 .priv = 1 | MODE_RAW | MODE_REDUCED_SIF}, 160 {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 161 .bytesperline = 160, 162 .sizeimage = 160 * 120 * 5 / 4, 163 .colorspace = V4L2_COLORSPACE_SRGB, 164 .priv = 1 | MODE_REDUCED_SIF}, 165 {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, 166 .bytesperline = 176, 167 .sizeimage = 176 * 144, 168 .colorspace = V4L2_COLORSPACE_SRGB, 169 .priv = 1 | MODE_RAW}, 170 {176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 171 .bytesperline = 176, 172 .sizeimage = 176 * 144 * 5 / 4, 173 .colorspace = V4L2_COLORSPACE_SRGB, 174 .priv = 1}, 175 {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 176 .bytesperline = 320, 177 .sizeimage = 320 * 240 * 5 / 4, 178 .colorspace = V4L2_COLORSPACE_SRGB, 179 .priv = 0 | MODE_REDUCED_SIF}, 180 {352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, 181 .bytesperline = 352, 182 .sizeimage = 352 * 288 * 5 / 4, 183 .colorspace = V4L2_COLORSPACE_SRGB, 184 .priv = 0}, 185 }; 186 187 static const __u8 initHv7131d[] = { 188 0x04, 0x03, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00, 189 0x00, 0x00, 190 0x00, 0x00, 0x00, 0x02, 0x02, 0x00, 191 0x28, 0x1e, 0x60, 0x8e, 0x42, 192 }; 193 static const __u8 hv7131d_sensor_init[][8] = { 194 {0xa0, 0x11, 0x01, 0x04, 0x00, 0x00, 0x00, 0x17}, 195 {0xa0, 0x11, 0x02, 0x00, 0x00, 0x00, 0x00, 0x17}, 196 {0xa0, 0x11, 0x28, 0x00, 0x00, 0x00, 0x00, 0x17}, 197 {0xa0, 0x11, 0x30, 0x30, 0x00, 0x00, 0x00, 0x17}, /* reset level */ 198 {0xa0, 0x11, 0x34, 0x02, 0x00, 0x00, 0x00, 0x17}, /* pixel bias volt */ 199 }; 200 201 static const __u8 initHv7131r[] = { 202 0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00, 203 0x00, 0x00, 204 0x00, 0x00, 0x00, 0x02, 0x01, 0x00, 205 0x28, 0x1e, 0x60, 0x8a, 0x20, 206 }; 207 static const __u8 hv7131r_sensor_init[][8] = { 208 {0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10}, 209 {0xa0, 0x11, 0x01, 0x08, 0x2a, 0x2e, 0x00, 0x10}, 210 {0xb0, 0x11, 0x20, 0x00, 0xd0, 0x2e, 0x00, 0x10}, 211 {0xc0, 0x11, 0x25, 0x03, 0x0e, 0x28, 0x00, 0x16}, 212 {0xa0, 0x11, 0x30, 0x10, 0x0e, 0x28, 0x00, 0x15}, 213 }; 214 static const __u8 initOv6650[] = { 215 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 216 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 217 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, 218 0x10, 219 }; 220 static const __u8 ov6650_sensor_init[][8] = { 221 /* Bright, contrast, etc are set through SCBB interface. 222 * AVCAP on win2 do not send any data on this controls. */ 223 /* Anyway, some registers appears to alter bright and constrat */ 224 225 /* Reset sensor */ 226 {0xa0, 0x60, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, 227 /* Set clock register 0x11 low nibble is clock divider */ 228 {0xd0, 0x60, 0x11, 0xc0, 0x1b, 0x18, 0xc1, 0x10}, 229 /* Next some unknown stuff */ 230 {0xb0, 0x60, 0x15, 0x00, 0x02, 0x18, 0xc1, 0x10}, 231 /* {0xa0, 0x60, 0x1b, 0x01, 0x02, 0x18, 0xc1, 0x10}, 232 * THIS SET GREEN SCREEN 233 * (pixels could be innverted in decode kind of "brg", 234 * but blue wont be there. Avoid this data ... */ 235 {0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, /* format out? */ 236 {0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, 237 {0xa0, 0x60, 0x30, 0x3d, 0x0a, 0xd8, 0xa4, 0x10}, 238 /* Enable rgb brightness control */ 239 {0xa0, 0x60, 0x61, 0x08, 0x00, 0x00, 0x00, 0x10}, 240 /* HDG: Note windows uses the line below, which sets both register 0x60 241 and 0x61 I believe these registers of the ov6650 are identical as 242 those of the ov7630, because if this is true the windows settings 243 add a bit additional red gain and a lot additional blue gain, which 244 matches my findings that the windows settings make blue much too 245 blue and red a little too red. 246 {0xb0, 0x60, 0x60, 0x66, 0x68, 0xd8, 0xa4, 0x10}, */ 247 /* Some more unknown stuff */ 248 {0xa0, 0x60, 0x68, 0x04, 0x68, 0xd8, 0xa4, 0x10}, 249 {0xd0, 0x60, 0x17, 0x24, 0xd6, 0x04, 0x94, 0x10}, /* Clipreg */ 250 }; 251 252 static const __u8 initOv7630[] = { 253 0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, /* r01 .. r08 */ 254 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ 255 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ 256 0x28, 0x1e, /* H & V sizes r15 .. r16 */ 257 0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */ 258 }; 259 static const __u8 ov7630_sensor_init[][8] = { 260 {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, 261 {0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10}, 262 /* {0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10}, jfm */ 263 {0xd0, 0x21, 0x12, 0x5c, 0x00, 0x80, 0x34, 0x10}, /* jfm */ 264 {0xa0, 0x21, 0x1b, 0x04, 0x00, 0x80, 0x34, 0x10}, 265 {0xa0, 0x21, 0x20, 0x44, 0x00, 0x80, 0x34, 0x10}, 266 {0xa0, 0x21, 0x23, 0xee, 0x00, 0x80, 0x34, 0x10}, 267 {0xd0, 0x21, 0x26, 0xa0, 0x9a, 0xa0, 0x30, 0x10}, 268 {0xb0, 0x21, 0x2a, 0x80, 0x00, 0xa0, 0x30, 0x10}, 269 {0xb0, 0x21, 0x2f, 0x3d, 0x24, 0xa0, 0x30, 0x10}, 270 {0xa0, 0x21, 0x32, 0x86, 0x24, 0xa0, 0x30, 0x10}, 271 {0xb0, 0x21, 0x60, 0xa9, 0x4a, 0xa0, 0x30, 0x10}, 272 /* {0xb0, 0x21, 0x60, 0xa9, 0x42, 0xa0, 0x30, 0x10}, * jfm */ 273 {0xa0, 0x21, 0x65, 0x00, 0x42, 0xa0, 0x30, 0x10}, 274 {0xa0, 0x21, 0x69, 0x38, 0x42, 0xa0, 0x30, 0x10}, 275 {0xc0, 0x21, 0x6f, 0x88, 0x0b, 0x00, 0x30, 0x10}, 276 {0xc0, 0x21, 0x74, 0x21, 0x8e, 0x00, 0x30, 0x10}, 277 {0xa0, 0x21, 0x7d, 0xf7, 0x8e, 0x00, 0x30, 0x10}, 278 {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10}, 279 }; 280 281 static const __u8 initPas106[] = { 282 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00, 283 0x00, 0x00, 284 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 285 0x16, 0x12, 0x24, COMP1, MCK_INIT1, 286 }; 287 /* compression 0x86 mckinit1 0x2b */ 288 289 /* "Known" PAS106B registers: 290 0x02 clock divider 291 0x03 Variable framerate bits 4-11 292 0x04 Var framerate bits 0-3, one must leave the 4 msb's at 0 !! 293 The variable framerate control must never be set lower then 300, 294 which sets the framerate at 90 / reg02, otherwise vsync is lost. 295 0x05 Shutter Time Line Offset, this can be used as an exposure control: 296 0 = use full frame time, 255 = no exposure at all 297 Note this may never be larger then "var-framerate control" / 2 - 2. 298 When var-framerate control is < 514, no exposure is reached at the max 299 allowed value for the framerate control value, rather then at 255. 300 0x06 Shutter Time Pixel Offset, like reg05 this influences exposure, but 301 only a very little bit, leave at 0xcd 302 0x07 offset sign bit (bit0 1 > negative offset) 303 0x08 offset 304 0x09 Blue Gain 305 0x0a Green1 Gain 306 0x0b Green2 Gain 307 0x0c Red Gain 308 0x0e Global gain 309 0x13 Write 1 to commit settings to sensor 310 */ 311 312 static const __u8 pas106_sensor_init[][8] = { 313 /* Pixel Clock Divider 6 */ 314 { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 }, 315 /* Frame Time MSB (also seen as 0x12) */ 316 { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 }, 317 /* Frame Time LSB (also seen as 0x05) */ 318 { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 }, 319 /* Shutter Time Line Offset (also seen as 0x6d) */ 320 { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 }, 321 /* Shutter Time Pixel Offset (also seen as 0xb1) */ 322 { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 }, 323 /* Black Level Subtract Sign (also seen 0x00) */ 324 { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 }, 325 /* Black Level Subtract Level (also seen 0x01) */ 326 { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 }, 327 { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 }, 328 /* Color Gain B Pixel 5 a */ 329 { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 }, 330 /* Color Gain G1 Pixel 1 5 */ 331 { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 }, 332 /* Color Gain G2 Pixel 1 0 5 */ 333 { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 }, 334 /* Color Gain R Pixel 3 1 */ 335 { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 }, 336 /* Color GainH Pixel */ 337 { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 }, 338 /* Global Gain */ 339 { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 }, 340 /* Contrast */ 341 { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 }, 342 /* H&V synchro polarity */ 343 { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 }, 344 /* ?default */ 345 { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 }, 346 /* DAC scale */ 347 { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 }, 348 /* ?default */ 349 { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 }, 350 /* Validate Settings */ 351 { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 }, 352 }; 353 354 static const __u8 initPas202[] = { 355 0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00, 356 0x00, 0x00, 357 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a, 358 0x28, 0x1e, 0x20, 0x89, 0x20, 359 }; 360 361 /* "Known" PAS202BCB registers: 362 0x02 clock divider 363 0x04 Variable framerate bits 6-11 (*) 364 0x05 Var framerate bits 0-5, one must leave the 2 msb's at 0 !! 365 0x07 Blue Gain 366 0x08 Green Gain 367 0x09 Red Gain 368 0x0b offset sign bit (bit0 1 > negative offset) 369 0x0c offset 370 0x0e Unknown image is slightly brighter when bit 0 is 0, if reg0f is 0 too, 371 leave at 1 otherwise we get a jump in our exposure control 372 0x0f Exposure 0-255, 0 = use full frame time, 255 = no exposure at all 373 0x10 Master gain 0 - 31 374 0x11 write 1 to apply changes 375 (*) The variable framerate control must never be set lower then 500 376 which sets the framerate at 30 / reg02, otherwise vsync is lost. 377 */ 378 static const __u8 pas202_sensor_init[][8] = { 379 /* Set the clock divider to 4 -> 30 / 4 = 7.5 fps, we would like 380 to set it lower, but for some reason the bridge starts missing 381 vsync's then */ 382 {0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10}, 383 {0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10}, 384 {0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10}, 385 {0xd0, 0x40, 0x0c, 0x00, 0x0c, 0x01, 0x32, 0x10}, 386 {0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10}, 387 {0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10}, 388 {0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10}, 389 {0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10}, 390 {0xa0, 0x40, 0x03, 0x56, 0x01, 0x00, 0x63, 0x10}, 391 {0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10}, 392 }; 393 394 static const __u8 initTas5110c[] = { 395 0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, 396 0x00, 0x00, 397 0x00, 0x00, 0x00, 0x45, 0x09, 0x0a, 398 0x16, 0x12, 0x60, 0x86, 0x2b, 399 }; 400 /* Same as above, except a different hstart */ 401 static const __u8 initTas5110d[] = { 402 0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, 403 0x00, 0x00, 404 0x00, 0x00, 0x00, 0x41, 0x09, 0x0a, 405 0x16, 0x12, 0x60, 0x86, 0x2b, 406 }; 407 /* tas5110c is 3 wire, tas5110d is 2 wire (regular i2c) */ 408 static const __u8 tas5110c_sensor_init[][8] = { 409 {0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10}, 410 {0x30, 0x11, 0x02, 0x20, 0xa9, 0x00, 0x00, 0x10}, 411 }; 412 /* Known TAS5110D registers 413 * reg02: gain, bit order reversed!! 0 == max gain, 255 == min gain 414 * reg03: bit3: vflip, bit4: ~hflip, bit7: ~gainboost (~ == inverted) 415 * Note: writing reg03 seems to only work when written together with 02 416 */ 417 static const __u8 tas5110d_sensor_init[][8] = { 418 {0xa0, 0x61, 0x9a, 0xca, 0x00, 0x00, 0x00, 0x17}, /* reset */ 419 }; 420 421 static const __u8 initTas5130[] = { 422 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, 423 0x00, 0x00, 424 0x00, 0x00, 0x00, 0x68, 0x0c, 0x0a, 425 0x28, 0x1e, 0x60, COMP, MCK_INIT, 426 }; 427 static const __u8 tas5130_sensor_init[][8] = { 428 /* {0x30, 0x11, 0x00, 0x40, 0x47, 0x00, 0x00, 0x10}, 429 * shutter 0x47 short exposure? */ 430 {0x30, 0x11, 0x00, 0x40, 0x01, 0x00, 0x00, 0x10}, 431 /* shutter 0x01 long exposure */ 432 {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}, 433 }; 434 435 static const struct sensor_data sensor_data[] = { 436 SENS(initHv7131d, hv7131d_sensor_init, 0, 0), 437 SENS(initHv7131r, hv7131r_sensor_init, 0, 0), 438 SENS(initOv6650, ov6650_sensor_init, F_SIF, 0x60), 439 SENS(initOv7630, ov7630_sensor_init, 0, 0x21), 440 SENS(initPas106, pas106_sensor_init, F_SIF, 0), 441 SENS(initPas202, pas202_sensor_init, 0, 0), 442 SENS(initTas5110c, tas5110c_sensor_init, F_SIF, 0), 443 SENS(initTas5110d, tas5110d_sensor_init, F_SIF, 0), 444 SENS(initTas5130, tas5130_sensor_init, 0, 0), 445 }; 446 447 /* get one byte in gspca_dev->usb_buf */ 448 static void reg_r(struct gspca_dev *gspca_dev, 449 __u16 value) 450 { 451 int res; 452 453 if (gspca_dev->usb_err < 0) 454 return; 455 456 res = usb_control_msg(gspca_dev->dev, 457 usb_rcvctrlpipe(gspca_dev->dev, 0), 458 0, /* request */ 459 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, 460 value, 461 0, /* index */ 462 gspca_dev->usb_buf, 1, 463 500); 464 465 if (res < 0) { 466 dev_err(gspca_dev->v4l2_dev.dev, 467 "Error reading register %02x: %d\n", value, res); 468 gspca_dev->usb_err = res; 469 } 470 } 471 472 static void reg_w(struct gspca_dev *gspca_dev, 473 __u16 value, 474 const __u8 *buffer, 475 int len) 476 { 477 int res; 478 479 if (gspca_dev->usb_err < 0) 480 return; 481 482 memcpy(gspca_dev->usb_buf, buffer, len); 483 res = usb_control_msg(gspca_dev->dev, 484 usb_sndctrlpipe(gspca_dev->dev, 0), 485 0x08, /* request */ 486 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, 487 value, 488 0, /* index */ 489 gspca_dev->usb_buf, len, 490 500); 491 492 if (res < 0) { 493 dev_err(gspca_dev->v4l2_dev.dev, 494 "Error writing register %02x: %d\n", value, res); 495 gspca_dev->usb_err = res; 496 } 497 } 498 499 static void i2c_w(struct gspca_dev *gspca_dev, const u8 *buf) 500 { 501 int retry = 60; 502 503 if (gspca_dev->usb_err < 0) 504 return; 505 506 /* is i2c ready */ 507 reg_w(gspca_dev, 0x08, buf, 8); 508 while (retry--) { 509 if (gspca_dev->usb_err < 0) 510 return; 511 msleep(1); 512 reg_r(gspca_dev, 0x08); 513 if (gspca_dev->usb_buf[0] & 0x04) { 514 if (gspca_dev->usb_buf[0] & 0x08) { 515 dev_err(gspca_dev->v4l2_dev.dev, 516 "i2c error writing %8ph\n", buf); 517 gspca_dev->usb_err = -EIO; 518 } 519 return; 520 } 521 } 522 523 dev_err(gspca_dev->v4l2_dev.dev, "i2c write timeout\n"); 524 gspca_dev->usb_err = -EIO; 525 } 526 527 static void i2c_w_vector(struct gspca_dev *gspca_dev, 528 const __u8 buffer[][8], int len) 529 { 530 for (;;) { 531 if (gspca_dev->usb_err < 0) 532 return; 533 i2c_w(gspca_dev, *buffer); 534 len -= 8; 535 if (len <= 0) 536 break; 537 buffer++; 538 } 539 } 540 541 static void setbrightness(struct gspca_dev *gspca_dev) 542 { 543 struct sd *sd = (struct sd *) gspca_dev; 544 545 switch (sd->sensor) { 546 case SENSOR_OV6650: 547 case SENSOR_OV7630: { 548 __u8 i2cOV[] = 549 {0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10}; 550 551 /* change reg 0x06 */ 552 i2cOV[1] = sensor_data[sd->sensor].sensor_addr; 553 i2cOV[3] = sd->brightness->val; 554 i2c_w(gspca_dev, i2cOV); 555 break; 556 } 557 case SENSOR_PAS106: 558 case SENSOR_PAS202: { 559 __u8 i2cpbright[] = 560 {0xb0, 0x40, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x16}; 561 __u8 i2cpdoit[] = 562 {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16}; 563 564 /* PAS106 uses reg 7 and 8 instead of b and c */ 565 if (sd->sensor == SENSOR_PAS106) { 566 i2cpbright[2] = 7; 567 i2cpdoit[2] = 0x13; 568 } 569 570 if (sd->brightness->val < 127) { 571 /* change reg 0x0b, signreg */ 572 i2cpbright[3] = 0x01; 573 /* set reg 0x0c, offset */ 574 i2cpbright[4] = 127 - sd->brightness->val; 575 } else 576 i2cpbright[4] = sd->brightness->val - 127; 577 578 i2c_w(gspca_dev, i2cpbright); 579 i2c_w(gspca_dev, i2cpdoit); 580 break; 581 } 582 default: 583 break; 584 } 585 } 586 587 static void setgain(struct gspca_dev *gspca_dev) 588 { 589 struct sd *sd = (struct sd *) gspca_dev; 590 u8 gain = gspca_dev->gain->val; 591 592 switch (sd->sensor) { 593 case SENSOR_HV7131D: { 594 __u8 i2c[] = 595 {0xc0, 0x11, 0x31, 0x00, 0x00, 0x00, 0x00, 0x17}; 596 597 i2c[3] = 0x3f - gain; 598 i2c[4] = 0x3f - gain; 599 i2c[5] = 0x3f - gain; 600 601 i2c_w(gspca_dev, i2c); 602 break; 603 } 604 case SENSOR_TAS5110C: 605 case SENSOR_TAS5130CXX: { 606 __u8 i2c[] = 607 {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; 608 609 i2c[4] = 255 - gain; 610 i2c_w(gspca_dev, i2c); 611 break; 612 } 613 case SENSOR_TAS5110D: { 614 __u8 i2c[] = { 615 0xb0, 0x61, 0x02, 0x00, 0x10, 0x00, 0x00, 0x17 }; 616 gain = 255 - gain; 617 /* The bits in the register are the wrong way around!! */ 618 i2c[3] |= (gain & 0x80) >> 7; 619 i2c[3] |= (gain & 0x40) >> 5; 620 i2c[3] |= (gain & 0x20) >> 3; 621 i2c[3] |= (gain & 0x10) >> 1; 622 i2c[3] |= (gain & 0x08) << 1; 623 i2c[3] |= (gain & 0x04) << 3; 624 i2c[3] |= (gain & 0x02) << 5; 625 i2c[3] |= (gain & 0x01) << 7; 626 i2c_w(gspca_dev, i2c); 627 break; 628 } 629 case SENSOR_OV6650: 630 case SENSOR_OV7630: { 631 __u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}; 632 633 /* 634 * The ov7630's gain is weird, at 32 the gain drops to the 635 * same level as at 16, so skip 32-47 (of the 0-63 scale). 636 */ 637 if (sd->sensor == SENSOR_OV7630 && gain >= 32) 638 gain += 16; 639 640 i2c[1] = sensor_data[sd->sensor].sensor_addr; 641 i2c[3] = gain; 642 i2c_w(gspca_dev, i2c); 643 break; 644 } 645 case SENSOR_PAS106: 646 case SENSOR_PAS202: { 647 __u8 i2cpgain[] = 648 {0xa0, 0x40, 0x10, 0x00, 0x00, 0x00, 0x00, 0x15}; 649 __u8 i2cpcolorgain[] = 650 {0xc0, 0x40, 0x07, 0x00, 0x00, 0x00, 0x00, 0x15}; 651 __u8 i2cpdoit[] = 652 {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16}; 653 654 /* PAS106 uses different regs (and has split green gains) */ 655 if (sd->sensor == SENSOR_PAS106) { 656 i2cpgain[2] = 0x0e; 657 i2cpcolorgain[0] = 0xd0; 658 i2cpcolorgain[2] = 0x09; 659 i2cpdoit[2] = 0x13; 660 } 661 662 i2cpgain[3] = gain; 663 i2cpcolorgain[3] = gain >> 1; 664 i2cpcolorgain[4] = gain >> 1; 665 i2cpcolorgain[5] = gain >> 1; 666 i2cpcolorgain[6] = gain >> 1; 667 668 i2c_w(gspca_dev, i2cpgain); 669 i2c_w(gspca_dev, i2cpcolorgain); 670 i2c_w(gspca_dev, i2cpdoit); 671 break; 672 } 673 default: 674 if (sd->bridge == BRIDGE_103) { 675 u8 buf[3] = { gain, gain, gain }; /* R, G, B */ 676 reg_w(gspca_dev, 0x05, buf, 3); 677 } else { 678 u8 buf[2]; 679 buf[0] = gain << 4 | gain; /* Red and blue */ 680 buf[1] = gain; /* Green */ 681 reg_w(gspca_dev, 0x10, buf, 2); 682 } 683 } 684 } 685 686 static void setexposure(struct gspca_dev *gspca_dev) 687 { 688 struct sd *sd = (struct sd *) gspca_dev; 689 690 switch (sd->sensor) { 691 case SENSOR_HV7131D: { 692 /* Note the datasheet wrongly says line mode exposure uses reg 693 0x26 and 0x27, testing has shown 0x25 + 0x26 */ 694 __u8 i2c[] = {0xc0, 0x11, 0x25, 0x00, 0x00, 0x00, 0x00, 0x17}; 695 u16 reg = gspca_dev->exposure->val; 696 697 i2c[3] = reg >> 8; 698 i2c[4] = reg & 0xff; 699 i2c_w(gspca_dev, i2c); 700 break; 701 } 702 case SENSOR_TAS5110C: 703 case SENSOR_TAS5110D: { 704 /* register 19's high nibble contains the sn9c10x clock divider 705 The high nibble configures the no fps according to the 706 formula: 60 / high_nibble. With a maximum of 30 fps */ 707 u8 reg = gspca_dev->exposure->val; 708 709 reg = (reg << 4) | 0x0b; 710 reg_w(gspca_dev, 0x19, ®, 1); 711 break; 712 } 713 case SENSOR_OV6650: 714 case SENSOR_OV7630: { 715 /* The ov6650 / ov7630 have 2 registers which both influence 716 exposure, register 11, whose low nibble sets the nr off fps 717 according to: fps = 30 / (low_nibble + 1) 718 719 The fps configures the maximum exposure setting, but it is 720 possible to use less exposure then what the fps maximum 721 allows by setting register 10. register 10 configures the 722 actual exposure as quotient of the full exposure, with 0 723 being no exposure at all (not very useful) and reg10_max 724 being max exposure possible at that framerate. 725 726 The code maps our 0 - 510 ms exposure ctrl to these 2 727 registers, trying to keep fps as high as possible. 728 */ 729 __u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10}; 730 int reg10, reg11, reg10_max; 731 732 /* ov6645 datasheet says reg10_max is 9a, but that uses 733 tline * 2 * reg10 as formula for calculating texpo, the 734 ov6650 probably uses the same formula as the 7730 which uses 735 tline * 4 * reg10, which explains why the reg10max we've 736 found experimentally for the ov6650 is exactly half that of 737 the ov6645. The ov7630 datasheet says the max is 0x41. */ 738 if (sd->sensor == SENSOR_OV6650) { 739 reg10_max = 0x4d; 740 i2c[4] = 0xc0; /* OV6650 needs non default vsync pol */ 741 } else 742 reg10_max = 0x41; 743 744 reg11 = (15 * gspca_dev->exposure->val + 999) / 1000; 745 if (reg11 < 1) 746 reg11 = 1; 747 else if (reg11 > 16) 748 reg11 = 16; 749 750 /* In 640x480, if the reg11 has less than 4, the image is 751 unstable (the bridge goes into a higher compression mode 752 which we have not reverse engineered yet). */ 753 if (gspca_dev->pixfmt.width == 640 && reg11 < 4) 754 reg11 = 4; 755 756 /* frame exposure time in ms = 1000 * reg11 / 30 -> 757 reg10 = (gspca_dev->exposure->val / 2) * reg10_max 758 / (1000 * reg11 / 30) */ 759 reg10 = (gspca_dev->exposure->val * 15 * reg10_max) 760 / (1000 * reg11); 761 762 /* Don't allow this to get below 10 when using autogain, the 763 steps become very large (relatively) when below 10 causing 764 the image to oscilate from much too dark, to much too bright 765 and back again. */ 766 if (gspca_dev->autogain->val && reg10 < 10) 767 reg10 = 10; 768 else if (reg10 > reg10_max) 769 reg10 = reg10_max; 770 771 /* Write reg 10 and reg11 low nibble */ 772 i2c[1] = sensor_data[sd->sensor].sensor_addr; 773 i2c[3] = reg10; 774 i2c[4] |= reg11 - 1; 775 776 /* If register 11 didn't change, don't change it */ 777 if (sd->reg11 == reg11) 778 i2c[0] = 0xa0; 779 780 i2c_w(gspca_dev, i2c); 781 if (gspca_dev->usb_err == 0) 782 sd->reg11 = reg11; 783 break; 784 } 785 case SENSOR_PAS202: { 786 __u8 i2cpframerate[] = 787 {0xb0, 0x40, 0x04, 0x00, 0x00, 0x00, 0x00, 0x16}; 788 __u8 i2cpexpo[] = 789 {0xa0, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x16}; 790 const __u8 i2cpdoit[] = 791 {0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16}; 792 int framerate_ctrl; 793 794 /* The exposure knee for the autogain algorithm is 200 795 (100 ms / 10 fps on other sensors), for values below this 796 use the control for setting the partial frame expose time, 797 above that use variable framerate. This way we run at max 798 framerate (640x480@7.5 fps, 320x240@10fps) until the knee 799 is reached. Using the variable framerate control above 200 800 is better then playing around with both clockdiv + partial 801 frame exposure times (like we are doing with the ov chips), 802 as that sometimes leads to jumps in the exposure control, 803 which are bad for auto exposure. */ 804 if (gspca_dev->exposure->val < 200) { 805 i2cpexpo[3] = 255 - (gspca_dev->exposure->val * 255) 806 / 200; 807 framerate_ctrl = 500; 808 } else { 809 /* The PAS202's exposure control goes from 0 - 4095, 810 but anything below 500 causes vsync issues, so scale 811 our 200-1023 to 500-4095 */ 812 framerate_ctrl = (gspca_dev->exposure->val - 200) 813 * 1000 / 229 + 500; 814 } 815 816 i2cpframerate[3] = framerate_ctrl >> 6; 817 i2cpframerate[4] = framerate_ctrl & 0x3f; 818 i2c_w(gspca_dev, i2cpframerate); 819 i2c_w(gspca_dev, i2cpexpo); 820 i2c_w(gspca_dev, i2cpdoit); 821 break; 822 } 823 case SENSOR_PAS106: { 824 __u8 i2cpframerate[] = 825 {0xb1, 0x40, 0x03, 0x00, 0x00, 0x00, 0x00, 0x14}; 826 __u8 i2cpexpo[] = 827 {0xa1, 0x40, 0x05, 0x00, 0x00, 0x00, 0x00, 0x14}; 828 const __u8 i2cpdoit[] = 829 {0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14}; 830 int framerate_ctrl; 831 832 /* For values below 150 use partial frame exposure, above 833 that use framerate ctrl */ 834 if (gspca_dev->exposure->val < 150) { 835 i2cpexpo[3] = 150 - gspca_dev->exposure->val; 836 framerate_ctrl = 300; 837 } else { 838 /* The PAS106's exposure control goes from 0 - 4095, 839 but anything below 300 causes vsync issues, so scale 840 our 150-1023 to 300-4095 */ 841 framerate_ctrl = (gspca_dev->exposure->val - 150) 842 * 1000 / 230 + 300; 843 } 844 845 i2cpframerate[3] = framerate_ctrl >> 4; 846 i2cpframerate[4] = framerate_ctrl & 0x0f; 847 i2c_w(gspca_dev, i2cpframerate); 848 i2c_w(gspca_dev, i2cpexpo); 849 i2c_w(gspca_dev, i2cpdoit); 850 break; 851 } 852 default: 853 break; 854 } 855 } 856 857 static void setfreq(struct gspca_dev *gspca_dev) 858 { 859 struct sd *sd = (struct sd *) gspca_dev; 860 861 if (sd->sensor == SENSOR_OV6650 || sd->sensor == SENSOR_OV7630) { 862 /* Framerate adjust register for artificial light 50 hz flicker 863 compensation, for the ov6650 this is identical to ov6630 864 0x2b register, see ov6630 datasheet. 865 0x4f / 0x8a -> (30 fps -> 25 fps), 0x00 -> no adjustment */ 866 __u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}; 867 switch (sd->plfreq->val) { 868 default: 869 /* case 0: * no filter*/ 870 /* case 2: * 60 hz */ 871 i2c[3] = 0; 872 break; 873 case 1: /* 50 hz */ 874 i2c[3] = (sd->sensor == SENSOR_OV6650) 875 ? 0x4f : 0x8a; 876 break; 877 } 878 i2c[1] = sensor_data[sd->sensor].sensor_addr; 879 i2c_w(gspca_dev, i2c); 880 } 881 } 882 883 static void do_autogain(struct gspca_dev *gspca_dev) 884 { 885 struct sd *sd = (struct sd *) gspca_dev; 886 int deadzone, desired_avg_lum, avg_lum; 887 888 avg_lum = atomic_read(&sd->avg_lum); 889 if (avg_lum == -1) 890 return; 891 892 if (sd->autogain_ignore_frames > 0) { 893 sd->autogain_ignore_frames--; 894 return; 895 } 896 897 /* SIF / VGA sensors have a different autoexposure area and thus 898 different avg_lum values for the same picture brightness */ 899 if (sensor_data[sd->sensor].flags & F_SIF) { 900 deadzone = 500; 901 /* SIF sensors tend to overexpose, so keep this small */ 902 desired_avg_lum = 5000; 903 } else { 904 deadzone = 1500; 905 desired_avg_lum = 13000; 906 } 907 908 if (sd->brightness) 909 desired_avg_lum = sd->brightness->val * desired_avg_lum / 127; 910 911 if (gspca_dev->exposure->maximum < 500) { 912 if (gspca_coarse_grained_expo_autogain(gspca_dev, avg_lum, 913 desired_avg_lum, deadzone)) 914 sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; 915 } else { 916 int gain_knee = (s32)gspca_dev->gain->maximum * 9 / 10; 917 if (gspca_expo_autogain(gspca_dev, avg_lum, desired_avg_lum, 918 deadzone, gain_knee, sd->exposure_knee)) 919 sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; 920 } 921 } 922 923 /* this function is called at probe time */ 924 static int sd_config(struct gspca_dev *gspca_dev, 925 const struct usb_device_id *id) 926 { 927 struct sd *sd = (struct sd *) gspca_dev; 928 struct cam *cam; 929 930 reg_r(gspca_dev, 0x00); 931 if (gspca_dev->usb_buf[0] != 0x10) 932 return -ENODEV; 933 934 /* copy the webcam info from the device id */ 935 sd->sensor = id->driver_info >> 8; 936 sd->bridge = id->driver_info & 0xff; 937 938 cam = &gspca_dev->cam; 939 if (!(sensor_data[sd->sensor].flags & F_SIF)) { 940 cam->cam_mode = vga_mode; 941 cam->nmodes = ARRAY_SIZE(vga_mode); 942 } else { 943 cam->cam_mode = sif_mode; 944 cam->nmodes = ARRAY_SIZE(sif_mode); 945 } 946 cam->npkt = 36; /* 36 packets per ISOC message */ 947 948 return 0; 949 } 950 951 /* this function is called at probe and resume time */ 952 static int sd_init(struct gspca_dev *gspca_dev) 953 { 954 const __u8 stop = 0x09; /* Disable stream turn of LED */ 955 956 reg_w(gspca_dev, 0x01, &stop, 1); 957 958 return gspca_dev->usb_err; 959 } 960 961 static int sd_s_ctrl(struct v4l2_ctrl *ctrl) 962 { 963 struct gspca_dev *gspca_dev = 964 container_of(ctrl->handler, struct gspca_dev, ctrl_handler); 965 struct sd *sd = (struct sd *)gspca_dev; 966 967 gspca_dev->usb_err = 0; 968 969 if (ctrl->id == V4L2_CID_AUTOGAIN && ctrl->is_new && ctrl->val) { 970 /* when switching to autogain set defaults to make sure 971 we are on a valid point of the autogain gain / 972 exposure knee graph, and give this change time to 973 take effect before doing autogain. */ 974 gspca_dev->gain->val = gspca_dev->gain->default_value; 975 gspca_dev->exposure->val = gspca_dev->exposure->default_value; 976 sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; 977 } 978 979 if (!gspca_dev->streaming) 980 return 0; 981 982 switch (ctrl->id) { 983 case V4L2_CID_BRIGHTNESS: 984 setbrightness(gspca_dev); 985 break; 986 case V4L2_CID_AUTOGAIN: 987 if (gspca_dev->exposure->is_new || (ctrl->is_new && ctrl->val)) 988 setexposure(gspca_dev); 989 if (gspca_dev->gain->is_new || (ctrl->is_new && ctrl->val)) 990 setgain(gspca_dev); 991 break; 992 case V4L2_CID_POWER_LINE_FREQUENCY: 993 setfreq(gspca_dev); 994 break; 995 default: 996 return -EINVAL; 997 } 998 return gspca_dev->usb_err; 999 } 1000 1001 static const struct v4l2_ctrl_ops sd_ctrl_ops = { 1002 .s_ctrl = sd_s_ctrl, 1003 }; 1004 1005 /* this function is called at probe time */ 1006 static int sd_init_controls(struct gspca_dev *gspca_dev) 1007 { 1008 struct sd *sd = (struct sd *) gspca_dev; 1009 struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; 1010 1011 gspca_dev->vdev.ctrl_handler = hdl; 1012 v4l2_ctrl_handler_init(hdl, 5); 1013 1014 if (sd->sensor == SENSOR_OV6650 || sd->sensor == SENSOR_OV7630 || 1015 sd->sensor == SENSOR_PAS106 || sd->sensor == SENSOR_PAS202) 1016 sd->brightness = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1017 V4L2_CID_BRIGHTNESS, 0, 255, 1, 127); 1018 1019 /* Gain range is sensor dependent */ 1020 switch (sd->sensor) { 1021 case SENSOR_OV6650: 1022 case SENSOR_PAS106: 1023 case SENSOR_PAS202: 1024 gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1025 V4L2_CID_GAIN, 0, 31, 1, 15); 1026 break; 1027 case SENSOR_OV7630: 1028 gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1029 V4L2_CID_GAIN, 0, 47, 1, 31); 1030 break; 1031 case SENSOR_HV7131D: 1032 gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1033 V4L2_CID_GAIN, 0, 63, 1, 31); 1034 break; 1035 case SENSOR_TAS5110C: 1036 case SENSOR_TAS5110D: 1037 case SENSOR_TAS5130CXX: 1038 gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1039 V4L2_CID_GAIN, 0, 255, 1, 127); 1040 break; 1041 default: 1042 if (sd->bridge == BRIDGE_103) { 1043 gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1044 V4L2_CID_GAIN, 0, 127, 1, 63); 1045 } else { 1046 gspca_dev->gain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1047 V4L2_CID_GAIN, 0, 15, 1, 7); 1048 } 1049 } 1050 1051 /* Exposure range is sensor dependent, and not all have exposure */ 1052 switch (sd->sensor) { 1053 case SENSOR_HV7131D: 1054 gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1055 V4L2_CID_EXPOSURE, 0, 8191, 1, 482); 1056 sd->exposure_knee = 964; 1057 break; 1058 case SENSOR_OV6650: 1059 case SENSOR_OV7630: 1060 case SENSOR_PAS106: 1061 case SENSOR_PAS202: 1062 gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1063 V4L2_CID_EXPOSURE, 0, 1023, 1, 66); 1064 sd->exposure_knee = 200; 1065 break; 1066 case SENSOR_TAS5110C: 1067 case SENSOR_TAS5110D: 1068 gspca_dev->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1069 V4L2_CID_EXPOSURE, 2, 15, 1, 2); 1070 break; 1071 } 1072 1073 if (gspca_dev->exposure) { 1074 gspca_dev->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 1075 V4L2_CID_AUTOGAIN, 0, 1, 1, 1); 1076 } 1077 1078 if (sd->sensor == SENSOR_OV6650 || sd->sensor == SENSOR_OV7630) 1079 sd->plfreq = v4l2_ctrl_new_std_menu(hdl, &sd_ctrl_ops, 1080 V4L2_CID_POWER_LINE_FREQUENCY, 1081 V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0, 1082 V4L2_CID_POWER_LINE_FREQUENCY_DISABLED); 1083 1084 if (hdl->error) { 1085 pr_err("Could not initialize controls\n"); 1086 return hdl->error; 1087 } 1088 1089 if (gspca_dev->autogain) 1090 v4l2_ctrl_auto_cluster(3, &gspca_dev->autogain, 0, false); 1091 1092 return 0; 1093 } 1094 1095 /* -- start the camera -- */ 1096 static int sd_start(struct gspca_dev *gspca_dev) 1097 { 1098 struct sd *sd = (struct sd *) gspca_dev; 1099 struct cam *cam = &gspca_dev->cam; 1100 int i, mode; 1101 __u8 regs[0x31]; 1102 1103 mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07; 1104 /* Copy registers 0x01 - 0x19 from the template */ 1105 memcpy(®s[0x01], sensor_data[sd->sensor].bridge_init, 0x19); 1106 /* Set the mode */ 1107 regs[0x18] |= mode << 4; 1108 1109 /* Set bridge gain to 1.0 */ 1110 if (sd->bridge == BRIDGE_103) { 1111 regs[0x05] = 0x20; /* Red */ 1112 regs[0x06] = 0x20; /* Green */ 1113 regs[0x07] = 0x20; /* Blue */ 1114 } else { 1115 regs[0x10] = 0x00; /* Red and blue */ 1116 regs[0x11] = 0x00; /* Green */ 1117 } 1118 1119 /* Setup pixel numbers and auto exposure window */ 1120 if (sensor_data[sd->sensor].flags & F_SIF) { 1121 regs[0x1a] = 0x14; /* HO_SIZE 640, makes no sense */ 1122 regs[0x1b] = 0x0a; /* VO_SIZE 320, makes no sense */ 1123 regs[0x1c] = 0x02; /* AE H-start 64 */ 1124 regs[0x1d] = 0x02; /* AE V-start 64 */ 1125 regs[0x1e] = 0x09; /* AE H-end 288 */ 1126 regs[0x1f] = 0x07; /* AE V-end 224 */ 1127 } else { 1128 regs[0x1a] = 0x1d; /* HO_SIZE 960, makes no sense */ 1129 regs[0x1b] = 0x10; /* VO_SIZE 512, makes no sense */ 1130 regs[0x1c] = 0x05; /* AE H-start 160 */ 1131 regs[0x1d] = 0x03; /* AE V-start 96 */ 1132 regs[0x1e] = 0x0f; /* AE H-end 480 */ 1133 regs[0x1f] = 0x0c; /* AE V-end 384 */ 1134 } 1135 1136 /* Setup the gamma table (only used with the sn9c103 bridge) */ 1137 for (i = 0; i < 16; i++) 1138 regs[0x20 + i] = i * 16; 1139 regs[0x20 + i] = 255; 1140 1141 /* Special cases where some regs depend on mode or bridge */ 1142 switch (sd->sensor) { 1143 case SENSOR_TAS5130CXX: 1144 /* FIXME / TESTME 1145 probably not mode specific at all most likely the upper 1146 nibble of 0x19 is exposure (clock divider) just as with 1147 the tas5110, we need someone to test this. */ 1148 regs[0x19] = mode ? 0x23 : 0x43; 1149 break; 1150 case SENSOR_OV7630: 1151 /* FIXME / TESTME for some reason with the 101/102 bridge the 1152 clock is set to 12 Mhz (reg1 == 0x04), rather then 24. 1153 Also the hstart needs to go from 1 to 2 when using a 103, 1154 which is likely related. This does not seem right. */ 1155 if (sd->bridge == BRIDGE_103) { 1156 regs[0x01] = 0x44; /* Select 24 Mhz clock */ 1157 regs[0x12] = 0x02; /* Set hstart to 2 */ 1158 } 1159 break; 1160 case SENSOR_PAS202: 1161 /* For some unknown reason we need to increase hstart by 1 on 1162 the sn9c103, otherwise we get wrong colors (bayer shift). */ 1163 if (sd->bridge == BRIDGE_103) 1164 regs[0x12] += 1; 1165 break; 1166 } 1167 /* Disable compression when the raw bayer format has been selected */ 1168 if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) 1169 regs[0x18] &= ~0x80; 1170 1171 /* Vga mode emulation on SIF sensor? */ 1172 if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) { 1173 regs[0x12] += 16; /* hstart adjust */ 1174 regs[0x13] += 24; /* vstart adjust */ 1175 regs[0x15] = 320 / 16; /* hsize */ 1176 regs[0x16] = 240 / 16; /* vsize */ 1177 } 1178 1179 /* reg 0x01 bit 2 video transfert on */ 1180 reg_w(gspca_dev, 0x01, ®s[0x01], 1); 1181 /* reg 0x17 SensorClk enable inv Clk 0x60 */ 1182 reg_w(gspca_dev, 0x17, ®s[0x17], 1); 1183 /* Set the registers from the template */ 1184 reg_w(gspca_dev, 0x01, ®s[0x01], 1185 (sd->bridge == BRIDGE_103) ? 0x30 : 0x1f); 1186 1187 /* Init the sensor */ 1188 i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init, 1189 sensor_data[sd->sensor].sensor_init_size); 1190 1191 /* Mode / bridge specific sensor setup */ 1192 switch (sd->sensor) { 1193 case SENSOR_PAS202: { 1194 const __u8 i2cpclockdiv[] = 1195 {0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10}; 1196 /* clockdiv from 4 to 3 (7.5 -> 10 fps) when in low res mode */ 1197 if (mode) 1198 i2c_w(gspca_dev, i2cpclockdiv); 1199 break; 1200 } 1201 case SENSOR_OV7630: 1202 /* FIXME / TESTME We should be able to handle this identical 1203 for the 101/102 and the 103 case */ 1204 if (sd->bridge == BRIDGE_103) { 1205 const __u8 i2c[] = { 0xa0, 0x21, 0x13, 1206 0x80, 0x00, 0x00, 0x00, 0x10 }; 1207 i2c_w(gspca_dev, i2c); 1208 } 1209 break; 1210 } 1211 /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ 1212 reg_w(gspca_dev, 0x15, ®s[0x15], 2); 1213 /* compression register */ 1214 reg_w(gspca_dev, 0x18, ®s[0x18], 1); 1215 /* H_start */ 1216 reg_w(gspca_dev, 0x12, ®s[0x12], 1); 1217 /* V_START */ 1218 reg_w(gspca_dev, 0x13, ®s[0x13], 1); 1219 /* reset 0x17 SensorClk enable inv Clk 0x60 */ 1220 /*fixme: ov7630 [17]=68 8f (+20 if 102)*/ 1221 reg_w(gspca_dev, 0x17, ®s[0x17], 1); 1222 /*MCKSIZE ->3 */ /*fixme: not ov7630*/ 1223 reg_w(gspca_dev, 0x19, ®s[0x19], 1); 1224 /* AE_STRX AE_STRY AE_ENDX AE_ENDY */ 1225 reg_w(gspca_dev, 0x1c, ®s[0x1c], 4); 1226 /* Enable video transfert */ 1227 reg_w(gspca_dev, 0x01, ®s[0x01], 1); 1228 /* Compression */ 1229 reg_w(gspca_dev, 0x18, ®s[0x18], 2); 1230 msleep(20); 1231 1232 sd->reg11 = -1; 1233 1234 setgain(gspca_dev); 1235 setbrightness(gspca_dev); 1236 setexposure(gspca_dev); 1237 setfreq(gspca_dev); 1238 1239 sd->frames_to_drop = 0; 1240 sd->autogain_ignore_frames = 0; 1241 gspca_dev->exp_too_high_cnt = 0; 1242 gspca_dev->exp_too_low_cnt = 0; 1243 atomic_set(&sd->avg_lum, -1); 1244 return gspca_dev->usb_err; 1245 } 1246 1247 static void sd_stopN(struct gspca_dev *gspca_dev) 1248 { 1249 sd_init(gspca_dev); 1250 } 1251 1252 static u8* find_sof(struct gspca_dev *gspca_dev, u8 *data, int len) 1253 { 1254 struct sd *sd = (struct sd *) gspca_dev; 1255 int i, header_size = (sd->bridge == BRIDGE_103) ? 18 : 12; 1256 1257 /* frames start with: 1258 * ff ff 00 c4 c4 96 synchro 1259 * 00 (unknown) 1260 * xx (frame sequence / size / compression) 1261 * (xx) (idem - extra byte for sn9c103) 1262 * ll mm brightness sum inside auto exposure 1263 * ll mm brightness sum outside auto exposure 1264 * (xx xx xx xx xx) audio values for snc103 1265 */ 1266 for (i = 0; i < len; i++) { 1267 switch (sd->header_read) { 1268 case 0: 1269 if (data[i] == 0xff) 1270 sd->header_read++; 1271 break; 1272 case 1: 1273 if (data[i] == 0xff) 1274 sd->header_read++; 1275 else 1276 sd->header_read = 0; 1277 break; 1278 case 2: 1279 if (data[i] == 0x00) 1280 sd->header_read++; 1281 else if (data[i] != 0xff) 1282 sd->header_read = 0; 1283 break; 1284 case 3: 1285 if (data[i] == 0xc4) 1286 sd->header_read++; 1287 else if (data[i] == 0xff) 1288 sd->header_read = 1; 1289 else 1290 sd->header_read = 0; 1291 break; 1292 case 4: 1293 if (data[i] == 0xc4) 1294 sd->header_read++; 1295 else if (data[i] == 0xff) 1296 sd->header_read = 1; 1297 else 1298 sd->header_read = 0; 1299 break; 1300 case 5: 1301 if (data[i] == 0x96) 1302 sd->header_read++; 1303 else if (data[i] == 0xff) 1304 sd->header_read = 1; 1305 else 1306 sd->header_read = 0; 1307 break; 1308 default: 1309 sd->header[sd->header_read - 6] = data[i]; 1310 sd->header_read++; 1311 if (sd->header_read == header_size) { 1312 sd->header_read = 0; 1313 return data + i + 1; 1314 } 1315 } 1316 } 1317 return NULL; 1318 } 1319 1320 static void sd_pkt_scan(struct gspca_dev *gspca_dev, 1321 u8 *data, /* isoc packet */ 1322 int len) /* iso packet length */ 1323 { 1324 int fr_h_sz = 0, lum_offset = 0, len_after_sof = 0; 1325 struct sd *sd = (struct sd *) gspca_dev; 1326 struct cam *cam = &gspca_dev->cam; 1327 u8 *sof; 1328 1329 sof = find_sof(gspca_dev, data, len); 1330 if (sof) { 1331 if (sd->bridge == BRIDGE_103) { 1332 fr_h_sz = 18; 1333 lum_offset = 3; 1334 } else { 1335 fr_h_sz = 12; 1336 lum_offset = 2; 1337 } 1338 1339 len_after_sof = len - (sof - data); 1340 len = (sof - data) - fr_h_sz; 1341 if (len < 0) 1342 len = 0; 1343 } 1344 1345 if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) { 1346 /* In raw mode we sometimes get some garbage after the frame 1347 ignore this */ 1348 int used; 1349 int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage; 1350 1351 used = gspca_dev->image_len; 1352 if (used + len > size) 1353 len = size - used; 1354 } 1355 1356 gspca_frame_add(gspca_dev, INTER_PACKET, data, len); 1357 1358 if (sof) { 1359 int lum = sd->header[lum_offset] + 1360 (sd->header[lum_offset + 1] << 8); 1361 1362 /* When exposure changes midway a frame we 1363 get a lum of 0 in this case drop 2 frames 1364 as the frames directly after an exposure 1365 change have an unstable image. Sometimes lum 1366 *really* is 0 (cam used in low light with 1367 low exposure setting), so do not drop frames 1368 if the previous lum was 0 too. */ 1369 if (lum == 0 && sd->prev_avg_lum != 0) { 1370 lum = -1; 1371 sd->frames_to_drop = 2; 1372 sd->prev_avg_lum = 0; 1373 } else 1374 sd->prev_avg_lum = lum; 1375 atomic_set(&sd->avg_lum, lum); 1376 1377 if (sd->frames_to_drop) 1378 sd->frames_to_drop--; 1379 else 1380 gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); 1381 1382 gspca_frame_add(gspca_dev, FIRST_PACKET, sof, len_after_sof); 1383 } 1384 } 1385 1386 #if IS_ENABLED(CONFIG_INPUT) 1387 static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, 1388 u8 *data, /* interrupt packet data */ 1389 int len) /* interrupt packet length */ 1390 { 1391 int ret = -EINVAL; 1392 1393 if (len == 1 && data[0] == 1) { 1394 input_report_key(gspca_dev->input_dev, KEY_CAMERA, 1); 1395 input_sync(gspca_dev->input_dev); 1396 input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); 1397 input_sync(gspca_dev->input_dev); 1398 ret = 0; 1399 } 1400 1401 return ret; 1402 } 1403 #endif 1404 1405 /* sub-driver description */ 1406 static const struct sd_desc sd_desc = { 1407 .name = MODULE_NAME, 1408 .config = sd_config, 1409 .init = sd_init, 1410 .init_controls = sd_init_controls, 1411 .start = sd_start, 1412 .stopN = sd_stopN, 1413 .pkt_scan = sd_pkt_scan, 1414 .dq_callback = do_autogain, 1415 #if IS_ENABLED(CONFIG_INPUT) 1416 .int_pkt_scan = sd_int_pkt_scan, 1417 #endif 1418 }; 1419 1420 /* -- module initialisation -- */ 1421 #define SB(sensor, bridge) \ 1422 .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge 1423 1424 1425 static const struct usb_device_id device_table[] = { 1426 {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */ 1427 {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */ 1428 {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */ 1429 {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, 1430 {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, 1431 {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, 1432 {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, 1433 {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, 1434 {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, 1435 {USB_DEVICE(0x0c45, 0x6027), SB(OV7630, 101)}, /* Genius Eye 310 */ 1436 {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)}, 1437 {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)}, 1438 {USB_DEVICE(0x0c45, 0x602a), SB(HV7131D, 102)}, 1439 /* {USB_DEVICE(0x0c45, 0x602b), SB(MI0343, 102)}, */ 1440 {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)}, 1441 {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, 1442 {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, 1443 /* {USB_DEVICE(0x0c45, 0x6030), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */ 1444 /* {USB_DEVICE(0x0c45, 0x6082), SB(MI03XX, 103)}, */ /* MI0343 MI0360 */ 1445 {USB_DEVICE(0x0c45, 0x6083), SB(HV7131D, 103)}, 1446 {USB_DEVICE(0x0c45, 0x608c), SB(HV7131R, 103)}, 1447 /* {USB_DEVICE(0x0c45, 0x608e), SB(CISVF10, 103)}, */ 1448 {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, 1449 {USB_DEVICE(0x0c45, 0x60a8), SB(PAS106, 103)}, 1450 {USB_DEVICE(0x0c45, 0x60aa), SB(TAS5130CXX, 103)}, 1451 {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, 1452 {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, 1453 {} 1454 }; 1455 MODULE_DEVICE_TABLE(usb, device_table); 1456 1457 /* -- device connect -- */ 1458 static int sd_probe(struct usb_interface *intf, 1459 const struct usb_device_id *id) 1460 { 1461 return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), 1462 THIS_MODULE); 1463 } 1464 1465 static struct usb_driver sd_driver = { 1466 .name = MODULE_NAME, 1467 .id_table = device_table, 1468 .probe = sd_probe, 1469 .disconnect = gspca_disconnect, 1470 #ifdef CONFIG_PM 1471 .suspend = gspca_suspend, 1472 .resume = gspca_resume, 1473 .reset_resume = gspca_resume, 1474 #endif 1475 }; 1476 1477 module_usb_driver(sd_driver); 1478