1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2005-2006 Micronas USA Inc. 4 */ 5 6 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 7 8 #include <linux/module.h> 9 #include <linux/kernel.h> 10 #include <linux/wait.h> 11 #include <linux/list.h> 12 #include <linux/slab.h> 13 #include <linux/time.h> 14 #include <linux/mm.h> 15 #include <linux/usb.h> 16 #include <linux/i2c.h> 17 #include <asm/byteorder.h> 18 #include <media/i2c/saa7115.h> 19 #include <media/tuner.h> 20 #include <media/i2c/uda1342.h> 21 22 #include "go7007-priv.h" 23 24 static unsigned int assume_endura; 25 module_param(assume_endura, int, 0644); 26 MODULE_PARM_DESC(assume_endura, 27 "when probing fails, hardware is a Pelco Endura"); 28 29 /* #define GO7007_I2C_DEBUG */ /* for debugging the EZ-USB I2C adapter */ 30 31 #define HPI_STATUS_ADDR 0xFFF4 32 #define INT_PARAM_ADDR 0xFFF6 33 #define INT_INDEX_ADDR 0xFFF8 34 35 /* 36 * Pipes on EZ-USB interface: 37 * 0 snd - Control 38 * 0 rcv - Control 39 * 2 snd - Download firmware (control) 40 * 4 rcv - Read Interrupt (interrupt) 41 * 6 rcv - Read Video (bulk) 42 * 8 rcv - Read Audio (bulk) 43 */ 44 45 #define GO7007_USB_EZUSB (1<<0) 46 #define GO7007_USB_EZUSB_I2C (1<<1) 47 48 struct go7007_usb_board { 49 unsigned int flags; 50 struct go7007_board_info main_info; 51 }; 52 53 struct go7007_usb { 54 const struct go7007_usb_board *board; 55 struct mutex i2c_lock; 56 struct usb_device *usbdev; 57 struct urb *video_urbs[8]; 58 struct urb *audio_urbs[8]; 59 struct urb *intr_urb; 60 }; 61 62 /*********************** Product specification data ***********************/ 63 64 static const struct go7007_usb_board board_matrix_ii = { 65 .flags = GO7007_USB_EZUSB, 66 .main_info = { 67 .flags = GO7007_BOARD_HAS_AUDIO | 68 GO7007_BOARD_USE_ONBOARD_I2C, 69 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 70 GO7007_AUDIO_WORD_16, 71 .audio_rate = 48000, 72 .audio_bclk_div = 8, 73 .audio_main_div = 2, 74 .hpi_buffer_cap = 7, 75 .sensor_flags = GO7007_SENSOR_656 | 76 GO7007_SENSOR_VALID_ENABLE | 77 GO7007_SENSOR_TV | 78 GO7007_SENSOR_SAA7115 | 79 GO7007_SENSOR_VBI | 80 GO7007_SENSOR_SCALING, 81 .num_i2c_devs = 1, 82 .i2c_devs = { 83 { 84 .type = "saa7115", 85 .addr = 0x20, 86 .is_video = 1, 87 }, 88 }, 89 .num_inputs = 2, 90 .inputs = { 91 { 92 .video_input = 0, 93 .name = "Composite", 94 }, 95 { 96 .video_input = 9, 97 .name = "S-Video", 98 }, 99 }, 100 .video_config = SAA7115_IDQ_IS_DEFAULT, 101 }, 102 }; 103 104 static const struct go7007_usb_board board_matrix_reload = { 105 .flags = GO7007_USB_EZUSB, 106 .main_info = { 107 .flags = GO7007_BOARD_HAS_AUDIO | 108 GO7007_BOARD_USE_ONBOARD_I2C, 109 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 110 GO7007_AUDIO_I2S_MASTER | 111 GO7007_AUDIO_WORD_16, 112 .audio_rate = 48000, 113 .audio_bclk_div = 8, 114 .audio_main_div = 2, 115 .hpi_buffer_cap = 7, 116 .sensor_flags = GO7007_SENSOR_656 | 117 GO7007_SENSOR_TV, 118 .num_i2c_devs = 1, 119 .i2c_devs = { 120 { 121 .type = "saa7113", 122 .addr = 0x25, 123 .is_video = 1, 124 }, 125 }, 126 .num_inputs = 2, 127 .inputs = { 128 { 129 .video_input = 0, 130 .name = "Composite", 131 }, 132 { 133 .video_input = 9, 134 .name = "S-Video", 135 }, 136 }, 137 .video_config = SAA7115_IDQ_IS_DEFAULT, 138 }, 139 }; 140 141 static const struct go7007_usb_board board_star_trek = { 142 .flags = GO7007_USB_EZUSB | GO7007_USB_EZUSB_I2C, 143 .main_info = { 144 .flags = GO7007_BOARD_HAS_AUDIO, /* | 145 GO7007_BOARD_HAS_TUNER, */ 146 .sensor_flags = GO7007_SENSOR_656 | 147 GO7007_SENSOR_VALID_ENABLE | 148 GO7007_SENSOR_TV | 149 GO7007_SENSOR_SAA7115 | 150 GO7007_SENSOR_VBI | 151 GO7007_SENSOR_SCALING, 152 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 153 GO7007_AUDIO_WORD_16, 154 .audio_bclk_div = 8, 155 .audio_main_div = 2, 156 .hpi_buffer_cap = 7, 157 .num_i2c_devs = 1, 158 .i2c_devs = { 159 { 160 .type = "saa7115", 161 .addr = 0x20, 162 .is_video = 1, 163 }, 164 }, 165 .num_inputs = 2, 166 .inputs = { 167 /* { 168 * .video_input = 3, 169 * .audio_index = AUDIO_TUNER, 170 * .name = "Tuner", 171 * }, 172 */ 173 { 174 .video_input = 1, 175 /* .audio_index = AUDIO_EXTERN, */ 176 .name = "Composite", 177 }, 178 { 179 .video_input = 8, 180 /* .audio_index = AUDIO_EXTERN, */ 181 .name = "S-Video", 182 }, 183 }, 184 .video_config = SAA7115_IDQ_IS_DEFAULT, 185 }, 186 }; 187 188 static const struct go7007_usb_board board_px_tv402u = { 189 .flags = GO7007_USB_EZUSB | GO7007_USB_EZUSB_I2C, 190 .main_info = { 191 .flags = GO7007_BOARD_HAS_AUDIO | 192 GO7007_BOARD_HAS_TUNER, 193 .sensor_flags = GO7007_SENSOR_656 | 194 GO7007_SENSOR_VALID_ENABLE | 195 GO7007_SENSOR_TV | 196 GO7007_SENSOR_SAA7115 | 197 GO7007_SENSOR_VBI | 198 GO7007_SENSOR_SCALING, 199 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 200 GO7007_AUDIO_WORD_16, 201 .audio_bclk_div = 8, 202 .audio_main_div = 2, 203 .hpi_buffer_cap = 7, 204 .num_i2c_devs = 5, 205 .i2c_devs = { 206 { 207 .type = "saa7115", 208 .addr = 0x20, 209 .is_video = 1, 210 }, 211 { 212 .type = "uda1342", 213 .addr = 0x1a, 214 .is_audio = 1, 215 }, 216 { 217 .type = "tuner", 218 .addr = 0x60, 219 }, 220 { 221 .type = "tuner", 222 .addr = 0x43, 223 }, 224 { 225 .type = "sony-btf-mpx", 226 .addr = 0x44, 227 }, 228 }, 229 .num_inputs = 3, 230 .inputs = { 231 { 232 .video_input = 3, 233 .audio_index = 0, 234 .name = "Tuner", 235 }, 236 { 237 .video_input = 1, 238 .audio_index = 1, 239 .name = "Composite", 240 }, 241 { 242 .video_input = 8, 243 .audio_index = 1, 244 .name = "S-Video", 245 }, 246 }, 247 .video_config = SAA7115_IDQ_IS_DEFAULT, 248 .num_aud_inputs = 2, 249 .aud_inputs = { 250 { 251 .audio_input = UDA1342_IN2, 252 .name = "Tuner", 253 }, 254 { 255 .audio_input = UDA1342_IN1, 256 .name = "Line In", 257 }, 258 }, 259 }, 260 }; 261 262 static const struct go7007_usb_board board_xmen = { 263 .flags = 0, 264 .main_info = { 265 .flags = GO7007_BOARD_USE_ONBOARD_I2C, 266 .hpi_buffer_cap = 0, 267 .sensor_flags = GO7007_SENSOR_VREF_POLAR, 268 .sensor_width = 320, 269 .sensor_height = 240, 270 .sensor_framerate = 30030, 271 .audio_flags = GO7007_AUDIO_ONE_CHANNEL | 272 GO7007_AUDIO_I2S_MODE_3 | 273 GO7007_AUDIO_WORD_14 | 274 GO7007_AUDIO_I2S_MASTER | 275 GO7007_AUDIO_BCLK_POLAR | 276 GO7007_AUDIO_OKI_MODE, 277 .audio_rate = 8000, 278 .audio_bclk_div = 48, 279 .audio_main_div = 1, 280 .num_i2c_devs = 1, 281 .i2c_devs = { 282 { 283 .type = "ov7640", 284 .addr = 0x21, 285 }, 286 }, 287 .num_inputs = 1, 288 .inputs = { 289 { 290 .name = "Camera", 291 }, 292 }, 293 }, 294 }; 295 296 static const struct go7007_usb_board board_matrix_revolution = { 297 .flags = GO7007_USB_EZUSB, 298 .main_info = { 299 .flags = GO7007_BOARD_HAS_AUDIO | 300 GO7007_BOARD_USE_ONBOARD_I2C, 301 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 302 GO7007_AUDIO_I2S_MASTER | 303 GO7007_AUDIO_WORD_16, 304 .audio_rate = 48000, 305 .audio_bclk_div = 8, 306 .audio_main_div = 2, 307 .hpi_buffer_cap = 7, 308 .sensor_flags = GO7007_SENSOR_656 | 309 GO7007_SENSOR_TV | 310 GO7007_SENSOR_VBI, 311 .num_i2c_devs = 1, 312 .i2c_devs = { 313 { 314 .type = "tw9903", 315 .is_video = 1, 316 .addr = 0x44, 317 }, 318 }, 319 .num_inputs = 2, 320 .inputs = { 321 { 322 .video_input = 2, 323 .name = "Composite", 324 }, 325 { 326 .video_input = 8, 327 .name = "S-Video", 328 }, 329 }, 330 }, 331 }; 332 333 #if 0 334 static const struct go7007_usb_board board_lifeview_lr192 = { 335 .flags = GO7007_USB_EZUSB, 336 .main_info = { 337 .flags = GO7007_BOARD_HAS_AUDIO | 338 GO7007_BOARD_USE_ONBOARD_I2C, 339 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 340 GO7007_AUDIO_WORD_16, 341 .audio_rate = 48000, 342 .audio_bclk_div = 8, 343 .audio_main_div = 2, 344 .hpi_buffer_cap = 7, 345 .sensor_flags = GO7007_SENSOR_656 | 346 GO7007_SENSOR_VALID_ENABLE | 347 GO7007_SENSOR_TV | 348 GO7007_SENSOR_VBI | 349 GO7007_SENSOR_SCALING, 350 .num_i2c_devs = 0, 351 .num_inputs = 1, 352 .inputs = { 353 { 354 .video_input = 0, 355 .name = "Composite", 356 }, 357 }, 358 }, 359 }; 360 #endif 361 362 static const struct go7007_usb_board board_endura = { 363 .flags = 0, 364 .main_info = { 365 .flags = 0, 366 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 367 GO7007_AUDIO_I2S_MASTER | 368 GO7007_AUDIO_WORD_16, 369 .audio_rate = 8000, 370 .audio_bclk_div = 48, 371 .audio_main_div = 8, 372 .hpi_buffer_cap = 0, 373 .sensor_flags = GO7007_SENSOR_656 | 374 GO7007_SENSOR_TV, 375 .sensor_h_offset = 8, 376 .num_i2c_devs = 0, 377 .num_inputs = 1, 378 .inputs = { 379 { 380 .name = "Camera", 381 }, 382 }, 383 }, 384 }; 385 386 static const struct go7007_usb_board board_adlink_mpg24 = { 387 .flags = 0, 388 .main_info = { 389 .flags = GO7007_BOARD_USE_ONBOARD_I2C, 390 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 391 GO7007_AUDIO_I2S_MASTER | 392 GO7007_AUDIO_WORD_16, 393 .audio_rate = 48000, 394 .audio_bclk_div = 8, 395 .audio_main_div = 2, 396 .hpi_buffer_cap = 0, 397 .sensor_flags = GO7007_SENSOR_656 | 398 GO7007_SENSOR_TV | 399 GO7007_SENSOR_VBI, 400 .num_i2c_devs = 1, 401 .i2c_devs = { 402 { 403 .type = "tw2804", 404 .addr = 0x00, /* yes, really */ 405 .flags = I2C_CLIENT_TEN, 406 .is_video = 1, 407 }, 408 }, 409 .num_inputs = 1, 410 .inputs = { 411 { 412 .name = "Composite", 413 }, 414 }, 415 }, 416 }; 417 418 static const struct go7007_usb_board board_sensoray_2250 = { 419 .flags = GO7007_USB_EZUSB | GO7007_USB_EZUSB_I2C, 420 .main_info = { 421 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 422 GO7007_AUDIO_I2S_MASTER | 423 GO7007_AUDIO_WORD_16, 424 .flags = GO7007_BOARD_HAS_AUDIO, 425 .audio_rate = 48000, 426 .audio_bclk_div = 8, 427 .audio_main_div = 2, 428 .hpi_buffer_cap = 7, 429 .sensor_flags = GO7007_SENSOR_656 | 430 GO7007_SENSOR_TV, 431 .num_i2c_devs = 1, 432 .i2c_devs = { 433 { 434 .type = "s2250", 435 .addr = 0x43, 436 .is_video = 1, 437 .is_audio = 1, 438 }, 439 }, 440 .num_inputs = 2, 441 .inputs = { 442 { 443 .video_input = 0, 444 .name = "Composite", 445 }, 446 { 447 .video_input = 1, 448 .name = "S-Video", 449 }, 450 }, 451 .num_aud_inputs = 3, 452 .aud_inputs = { 453 { 454 .audio_input = 0, 455 .name = "Line In", 456 }, 457 { 458 .audio_input = 1, 459 .name = "Mic", 460 }, 461 { 462 .audio_input = 2, 463 .name = "Mic Boost", 464 }, 465 }, 466 }, 467 }; 468 469 static const struct go7007_usb_board board_ads_usbav_709 = { 470 .flags = GO7007_USB_EZUSB, 471 .main_info = { 472 .flags = GO7007_BOARD_HAS_AUDIO | 473 GO7007_BOARD_USE_ONBOARD_I2C, 474 .audio_flags = GO7007_AUDIO_I2S_MODE_1 | 475 GO7007_AUDIO_I2S_MASTER | 476 GO7007_AUDIO_WORD_16, 477 .audio_rate = 48000, 478 .audio_bclk_div = 8, 479 .audio_main_div = 2, 480 .hpi_buffer_cap = 7, 481 .sensor_flags = GO7007_SENSOR_656 | 482 GO7007_SENSOR_TV | 483 GO7007_SENSOR_VBI, 484 .num_i2c_devs = 1, 485 .i2c_devs = { 486 { 487 .type = "tw9906", 488 .is_video = 1, 489 .addr = 0x44, 490 }, 491 }, 492 .num_inputs = 2, 493 .inputs = { 494 { 495 .video_input = 0, 496 .name = "Composite", 497 }, 498 { 499 .video_input = 10, 500 .name = "S-Video", 501 }, 502 }, 503 }, 504 }; 505 506 static const struct usb_device_id go7007_usb_id_table[] = { 507 { 508 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION | 509 USB_DEVICE_ID_MATCH_INT_INFO, 510 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 511 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 512 .bcdDevice_lo = 0x200, /* Revision number of XMen */ 513 .bcdDevice_hi = 0x200, 514 .bInterfaceClass = 255, 515 .bInterfaceSubClass = 0, 516 .bInterfaceProtocol = 255, 517 .driver_info = (kernel_ulong_t)GO7007_BOARDID_XMEN, 518 }, 519 { 520 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 521 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 522 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 523 .bcdDevice_lo = 0x202, /* Revision number of Matrix II */ 524 .bcdDevice_hi = 0x202, 525 .driver_info = (kernel_ulong_t)GO7007_BOARDID_MATRIX_II, 526 }, 527 { 528 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 529 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 530 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 531 .bcdDevice_lo = 0x204, /* Revision number of Matrix */ 532 .bcdDevice_hi = 0x204, /* Reloaded */ 533 .driver_info = (kernel_ulong_t)GO7007_BOARDID_MATRIX_RELOAD, 534 }, 535 { 536 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION | 537 USB_DEVICE_ID_MATCH_INT_INFO, 538 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 539 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 540 .bcdDevice_lo = 0x205, /* Revision number of XMen-II */ 541 .bcdDevice_hi = 0x205, 542 .bInterfaceClass = 255, 543 .bInterfaceSubClass = 0, 544 .bInterfaceProtocol = 255, 545 .driver_info = (kernel_ulong_t)GO7007_BOARDID_XMEN_II, 546 }, 547 { 548 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 549 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 550 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 551 .bcdDevice_lo = 0x208, /* Revision number of Star Trek */ 552 .bcdDevice_hi = 0x208, 553 .driver_info = (kernel_ulong_t)GO7007_BOARDID_STAR_TREK, 554 }, 555 { 556 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION | 557 USB_DEVICE_ID_MATCH_INT_INFO, 558 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 559 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 560 .bcdDevice_lo = 0x209, /* Revision number of XMen-III */ 561 .bcdDevice_hi = 0x209, 562 .bInterfaceClass = 255, 563 .bInterfaceSubClass = 0, 564 .bInterfaceProtocol = 255, 565 .driver_info = (kernel_ulong_t)GO7007_BOARDID_XMEN_III, 566 }, 567 { 568 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 569 .idVendor = 0x0eb1, /* Vendor ID of WIS Technologies */ 570 .idProduct = 0x7007, /* Product ID of GO7007SB chip */ 571 .bcdDevice_lo = 0x210, /* Revision number of Matrix */ 572 .bcdDevice_hi = 0x210, /* Revolution */ 573 .driver_info = (kernel_ulong_t)GO7007_BOARDID_MATRIX_REV, 574 }, 575 { 576 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 577 .idVendor = 0x093b, /* Vendor ID of Plextor */ 578 .idProduct = 0xa102, /* Product ID of M402U */ 579 .bcdDevice_lo = 0x1, /* revision number of Blueberry */ 580 .bcdDevice_hi = 0x1, 581 .driver_info = (kernel_ulong_t)GO7007_BOARDID_PX_M402U, 582 }, 583 { 584 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 585 .idVendor = 0x093b, /* Vendor ID of Plextor */ 586 .idProduct = 0xa104, /* Product ID of TV402U */ 587 .bcdDevice_lo = 0x1, 588 .bcdDevice_hi = 0x1, 589 .driver_info = (kernel_ulong_t)GO7007_BOARDID_PX_TV402U, 590 }, 591 { 592 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 593 .idVendor = 0x10fd, /* Vendor ID of Anubis Electronics */ 594 .idProduct = 0xde00, /* Product ID of Lifeview LR192 */ 595 .bcdDevice_lo = 0x1, 596 .bcdDevice_hi = 0x1, 597 .driver_info = (kernel_ulong_t)GO7007_BOARDID_LIFEVIEW_LR192, 598 }, 599 { 600 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 601 .idVendor = 0x1943, /* Vendor ID Sensoray */ 602 .idProduct = 0x2250, /* Product ID of 2250/2251 */ 603 .bcdDevice_lo = 0x1, 604 .bcdDevice_hi = 0x1, 605 .driver_info = (kernel_ulong_t)GO7007_BOARDID_SENSORAY_2250, 606 }, 607 { 608 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, 609 .idVendor = 0x06e1, /* Vendor ID of ADS Technologies */ 610 .idProduct = 0x0709, /* Product ID of DVD Xpress DX2 */ 611 .bcdDevice_lo = 0x204, 612 .bcdDevice_hi = 0x204, 613 .driver_info = (kernel_ulong_t)GO7007_BOARDID_ADS_USBAV_709, 614 }, 615 { } /* Terminating entry */ 616 }; 617 618 MODULE_DEVICE_TABLE(usb, go7007_usb_id_table); 619 620 /********************* Driver for EZ-USB HPI interface *********************/ 621 622 static int go7007_usb_vendor_request(struct go7007 *go, int request, 623 int value, int index, void *transfer_buffer, int length, int in) 624 { 625 struct go7007_usb *usb = go->hpi_context; 626 int timeout = 5000; 627 628 if (in) { 629 return usb_control_msg(usb->usbdev, 630 usb_rcvctrlpipe(usb->usbdev, 0), request, 631 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 632 value, index, transfer_buffer, length, timeout); 633 } else { 634 return usb_control_msg(usb->usbdev, 635 usb_sndctrlpipe(usb->usbdev, 0), request, 636 USB_TYPE_VENDOR | USB_RECIP_DEVICE, 637 value, index, transfer_buffer, length, timeout); 638 } 639 } 640 641 static int go7007_usb_interface_reset(struct go7007 *go) 642 { 643 struct go7007_usb *usb = go->hpi_context; 644 u16 intr_val, intr_data; 645 646 if (go->status == STATUS_SHUTDOWN) 647 return -1; 648 /* Reset encoder */ 649 if (go7007_write_interrupt(go, 0x0001, 0x0001) < 0) 650 return -1; 651 msleep(100); 652 653 if (usb->board->flags & GO7007_USB_EZUSB) { 654 /* Reset buffer in EZ-USB */ 655 pr_debug("resetting EZ-USB buffers\n"); 656 if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 || 657 go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0) 658 return -1; 659 660 /* Reset encoder again */ 661 if (go7007_write_interrupt(go, 0x0001, 0x0001) < 0) 662 return -1; 663 msleep(100); 664 } 665 666 /* Wait for an interrupt to indicate successful hardware reset */ 667 if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 || 668 (intr_val & ~0x1) != 0x55aa) { 669 dev_err(go->dev, "unable to reset the USB interface\n"); 670 return -1; 671 } 672 return 0; 673 } 674 675 static int go7007_usb_ezusb_write_interrupt(struct go7007 *go, 676 int addr, int data) 677 { 678 struct go7007_usb *usb = go->hpi_context; 679 int i, r; 680 u16 status_reg = 0; 681 int timeout = 500; 682 683 pr_debug("WriteInterrupt: %04x %04x\n", addr, data); 684 685 for (i = 0; i < 100; ++i) { 686 r = usb_control_msg(usb->usbdev, 687 usb_rcvctrlpipe(usb->usbdev, 0), 0x14, 688 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 689 0, HPI_STATUS_ADDR, go->usb_buf, 690 sizeof(status_reg), timeout); 691 if (r < 0) 692 break; 693 status_reg = le16_to_cpu(*((__le16 *)go->usb_buf)); 694 if (!(status_reg & 0x0010)) 695 break; 696 msleep(10); 697 } 698 if (r < 0) 699 goto write_int_error; 700 if (i == 100) { 701 dev_err(go->dev, "device is hung, status reg = 0x%04x\n", status_reg); 702 return -1; 703 } 704 r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 0), 0x12, 705 USB_TYPE_VENDOR | USB_RECIP_DEVICE, data, 706 INT_PARAM_ADDR, NULL, 0, timeout); 707 if (r < 0) 708 goto write_int_error; 709 r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 0), 710 0x12, USB_TYPE_VENDOR | USB_RECIP_DEVICE, addr, 711 INT_INDEX_ADDR, NULL, 0, timeout); 712 if (r < 0) 713 goto write_int_error; 714 return 0; 715 716 write_int_error: 717 dev_err(go->dev, "error in WriteInterrupt: %d\n", r); 718 return r; 719 } 720 721 static int go7007_usb_onboard_write_interrupt(struct go7007 *go, 722 int addr, int data) 723 { 724 struct go7007_usb *usb = go->hpi_context; 725 int r; 726 int timeout = 500; 727 728 pr_debug("WriteInterrupt: %04x %04x\n", addr, data); 729 730 go->usb_buf[0] = data & 0xff; 731 go->usb_buf[1] = data >> 8; 732 go->usb_buf[2] = addr & 0xff; 733 go->usb_buf[3] = addr >> 8; 734 go->usb_buf[4] = go->usb_buf[5] = go->usb_buf[6] = go->usb_buf[7] = 0; 735 r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 2), 0x00, 736 USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0x55aa, 737 0xf0f0, go->usb_buf, 8, timeout); 738 if (r < 0) { 739 dev_err(go->dev, "error in WriteInterrupt: %d\n", r); 740 return r; 741 } 742 return 0; 743 } 744 745 static void go7007_usb_readinterrupt_complete(struct urb *urb) 746 { 747 struct go7007 *go = (struct go7007 *)urb->context; 748 __le16 *regs = (__le16 *)urb->transfer_buffer; 749 int status = urb->status; 750 751 if (status) { 752 if (status != -ESHUTDOWN && 753 go->status != STATUS_SHUTDOWN) { 754 dev_err(go->dev, "error in read interrupt: %d\n", urb->status); 755 } else { 756 wake_up(&go->interrupt_waitq); 757 return; 758 } 759 } else if (urb->actual_length != urb->transfer_buffer_length) { 760 dev_err(go->dev, "short read in interrupt pipe!\n"); 761 } else { 762 go->interrupt_available = 1; 763 go->interrupt_data = __le16_to_cpu(regs[0]); 764 go->interrupt_value = __le16_to_cpu(regs[1]); 765 pr_debug("ReadInterrupt: %04x %04x\n", 766 go->interrupt_value, go->interrupt_data); 767 } 768 769 wake_up(&go->interrupt_waitq); 770 } 771 772 static int go7007_usb_read_interrupt(struct go7007 *go) 773 { 774 struct go7007_usb *usb = go->hpi_context; 775 int r; 776 777 r = usb_submit_urb(usb->intr_urb, GFP_KERNEL); 778 if (r < 0) { 779 dev_err(go->dev, "unable to submit interrupt urb: %d\n", r); 780 return r; 781 } 782 return 0; 783 } 784 785 static void go7007_usb_read_video_pipe_complete(struct urb *urb) 786 { 787 struct go7007 *go = (struct go7007 *)urb->context; 788 int r, status = urb->status; 789 790 if (!vb2_is_streaming(&go->vidq)) { 791 wake_up_interruptible(&go->frame_waitq); 792 return; 793 } 794 if (status) { 795 dev_err(go->dev, "error in video pipe: %d\n", status); 796 return; 797 } 798 if (urb->actual_length != urb->transfer_buffer_length) { 799 dev_err(go->dev, "short read in video pipe!\n"); 800 return; 801 } 802 go7007_parse_video_stream(go, urb->transfer_buffer, urb->actual_length); 803 r = usb_submit_urb(urb, GFP_ATOMIC); 804 if (r < 0) 805 dev_err(go->dev, "error in video pipe: %d\n", r); 806 } 807 808 static void go7007_usb_read_audio_pipe_complete(struct urb *urb) 809 { 810 struct go7007 *go = (struct go7007 *)urb->context; 811 int r, status = urb->status; 812 813 if (!vb2_is_streaming(&go->vidq)) 814 return; 815 if (status) { 816 dev_err(go->dev, "error in audio pipe: %d\n", 817 status); 818 return; 819 } 820 if (urb->actual_length != urb->transfer_buffer_length) { 821 dev_err(go->dev, "short read in audio pipe!\n"); 822 return; 823 } 824 if (go->audio_deliver != NULL) 825 go->audio_deliver(go, urb->transfer_buffer, urb->actual_length); 826 r = usb_submit_urb(urb, GFP_ATOMIC); 827 if (r < 0) 828 dev_err(go->dev, "error in audio pipe: %d\n", r); 829 } 830 831 static int go7007_usb_stream_start(struct go7007 *go) 832 { 833 struct go7007_usb *usb = go->hpi_context; 834 int i, r; 835 836 for (i = 0; i < 8; ++i) { 837 r = usb_submit_urb(usb->video_urbs[i], GFP_KERNEL); 838 if (r < 0) { 839 dev_err(go->dev, "error submitting video urb %d: %d\n", i, r); 840 goto video_submit_failed; 841 } 842 } 843 if (!go->audio_enabled) 844 return 0; 845 846 for (i = 0; i < 8; ++i) { 847 r = usb_submit_urb(usb->audio_urbs[i], GFP_KERNEL); 848 if (r < 0) { 849 dev_err(go->dev, "error submitting audio urb %d: %d\n", i, r); 850 goto audio_submit_failed; 851 } 852 } 853 return 0; 854 855 audio_submit_failed: 856 for (i = 0; i < 7; ++i) 857 usb_kill_urb(usb->audio_urbs[i]); 858 video_submit_failed: 859 for (i = 0; i < 8; ++i) 860 usb_kill_urb(usb->video_urbs[i]); 861 return -1; 862 } 863 864 static int go7007_usb_stream_stop(struct go7007 *go) 865 { 866 struct go7007_usb *usb = go->hpi_context; 867 int i; 868 869 if (go->status == STATUS_SHUTDOWN) 870 return 0; 871 for (i = 0; i < 8; ++i) 872 usb_kill_urb(usb->video_urbs[i]); 873 if (go->audio_enabled) 874 for (i = 0; i < 8; ++i) 875 usb_kill_urb(usb->audio_urbs[i]); 876 return 0; 877 } 878 879 static int go7007_usb_send_firmware(struct go7007 *go, u8 *data, int len) 880 { 881 struct go7007_usb *usb = go->hpi_context; 882 int transferred, pipe; 883 int timeout = 500; 884 885 pr_debug("DownloadBuffer sending %d bytes\n", len); 886 887 if (usb->board->flags & GO7007_USB_EZUSB) 888 pipe = usb_sndbulkpipe(usb->usbdev, 2); 889 else 890 pipe = usb_sndbulkpipe(usb->usbdev, 3); 891 892 return usb_bulk_msg(usb->usbdev, pipe, data, len, 893 &transferred, timeout); 894 } 895 896 static void go7007_usb_release(struct go7007 *go) 897 { 898 struct go7007_usb *usb = go->hpi_context; 899 struct urb *vurb, *aurb; 900 int i; 901 902 if (usb->intr_urb) { 903 usb_kill_urb(usb->intr_urb); 904 kfree(usb->intr_urb->transfer_buffer); 905 usb_free_urb(usb->intr_urb); 906 } 907 908 /* Free USB-related structs */ 909 for (i = 0; i < 8; ++i) { 910 vurb = usb->video_urbs[i]; 911 if (vurb) { 912 usb_kill_urb(vurb); 913 kfree(vurb->transfer_buffer); 914 usb_free_urb(vurb); 915 } 916 aurb = usb->audio_urbs[i]; 917 if (aurb) { 918 usb_kill_urb(aurb); 919 kfree(aurb->transfer_buffer); 920 usb_free_urb(aurb); 921 } 922 } 923 924 kfree(go->hpi_context); 925 } 926 927 static const struct go7007_hpi_ops go7007_usb_ezusb_hpi_ops = { 928 .interface_reset = go7007_usb_interface_reset, 929 .write_interrupt = go7007_usb_ezusb_write_interrupt, 930 .read_interrupt = go7007_usb_read_interrupt, 931 .stream_start = go7007_usb_stream_start, 932 .stream_stop = go7007_usb_stream_stop, 933 .send_firmware = go7007_usb_send_firmware, 934 .release = go7007_usb_release, 935 }; 936 937 static const struct go7007_hpi_ops go7007_usb_onboard_hpi_ops = { 938 .interface_reset = go7007_usb_interface_reset, 939 .write_interrupt = go7007_usb_onboard_write_interrupt, 940 .read_interrupt = go7007_usb_read_interrupt, 941 .stream_start = go7007_usb_stream_start, 942 .stream_stop = go7007_usb_stream_stop, 943 .send_firmware = go7007_usb_send_firmware, 944 .release = go7007_usb_release, 945 }; 946 947 /********************* Driver for EZ-USB I2C adapter *********************/ 948 949 static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter, 950 struct i2c_msg msgs[], int num) 951 { 952 struct go7007 *go = i2c_get_adapdata(adapter); 953 struct go7007_usb *usb = go->hpi_context; 954 u8 *buf = go->usb_buf; 955 int buf_len, i; 956 int ret = -EIO; 957 958 if (go->status == STATUS_SHUTDOWN) 959 return -ENODEV; 960 961 mutex_lock(&usb->i2c_lock); 962 963 for (i = 0; i < num; ++i) { 964 /* The hardware command is "write some bytes then read some 965 * bytes", so we try to coalesce a write followed by a read 966 * into a single USB transaction */ 967 if (i + 1 < num && msgs[i].addr == msgs[i + 1].addr && 968 !(msgs[i].flags & I2C_M_RD) && 969 (msgs[i + 1].flags & I2C_M_RD)) { 970 #ifdef GO7007_I2C_DEBUG 971 pr_debug("i2c write/read %d/%d bytes on %02x\n", 972 msgs[i].len, msgs[i + 1].len, msgs[i].addr); 973 #endif 974 buf[0] = 0x01; 975 buf[1] = msgs[i].len + 1; 976 buf[2] = msgs[i].addr << 1; 977 memcpy(&buf[3], msgs[i].buf, msgs[i].len); 978 buf_len = msgs[i].len + 3; 979 buf[buf_len++] = msgs[++i].len; 980 } else if (msgs[i].flags & I2C_M_RD) { 981 #ifdef GO7007_I2C_DEBUG 982 pr_debug("i2c read %d bytes on %02x\n", 983 msgs[i].len, msgs[i].addr); 984 #endif 985 buf[0] = 0x01; 986 buf[1] = 1; 987 buf[2] = msgs[i].addr << 1; 988 buf[3] = msgs[i].len; 989 buf_len = 4; 990 } else { 991 #ifdef GO7007_I2C_DEBUG 992 pr_debug("i2c write %d bytes on %02x\n", 993 msgs[i].len, msgs[i].addr); 994 #endif 995 buf[0] = 0x00; 996 buf[1] = msgs[i].len + 1; 997 buf[2] = msgs[i].addr << 1; 998 memcpy(&buf[3], msgs[i].buf, msgs[i].len); 999 buf_len = msgs[i].len + 3; 1000 buf[buf_len++] = 0; 1001 } 1002 if (go7007_usb_vendor_request(go, 0x24, 0, 0, 1003 buf, buf_len, 0) < 0) 1004 goto i2c_done; 1005 if (msgs[i].flags & I2C_M_RD) { 1006 memset(buf, 0, msgs[i].len + 1); 1007 if (go7007_usb_vendor_request(go, 0x25, 0, 0, buf, 1008 msgs[i].len + 1, 1) < 0) 1009 goto i2c_done; 1010 memcpy(msgs[i].buf, buf + 1, msgs[i].len); 1011 } 1012 } 1013 ret = num; 1014 1015 i2c_done: 1016 mutex_unlock(&usb->i2c_lock); 1017 return ret; 1018 } 1019 1020 static u32 go7007_usb_functionality(struct i2c_adapter *adapter) 1021 { 1022 /* No errors are reported by the hardware, so we don't bother 1023 * supporting quick writes to avoid confusing probing */ 1024 return (I2C_FUNC_SMBUS_EMUL) & ~I2C_FUNC_SMBUS_QUICK; 1025 } 1026 1027 static const struct i2c_algorithm go7007_usb_algo = { 1028 .master_xfer = go7007_usb_i2c_master_xfer, 1029 .functionality = go7007_usb_functionality, 1030 }; 1031 1032 static struct i2c_adapter go7007_usb_adap_templ = { 1033 .owner = THIS_MODULE, 1034 .name = "WIS GO7007SB EZ-USB", 1035 .algo = &go7007_usb_algo, 1036 }; 1037 1038 /********************* USB add/remove functions *********************/ 1039 1040 static int go7007_usb_probe(struct usb_interface *intf, 1041 const struct usb_device_id *id) 1042 { 1043 struct go7007 *go; 1044 struct go7007_usb *usb; 1045 const struct go7007_usb_board *board; 1046 struct usb_device *usbdev = interface_to_usbdev(intf); 1047 struct usb_host_endpoint *ep; 1048 unsigned num_i2c_devs; 1049 char *name; 1050 int video_pipe, i, v_urb_len; 1051 1052 pr_debug("probing new GO7007 USB board\n"); 1053 1054 switch (id->driver_info) { 1055 case GO7007_BOARDID_MATRIX_II: 1056 name = "WIS Matrix II or compatible"; 1057 board = &board_matrix_ii; 1058 break; 1059 case GO7007_BOARDID_MATRIX_RELOAD: 1060 name = "WIS Matrix Reloaded or compatible"; 1061 board = &board_matrix_reload; 1062 break; 1063 case GO7007_BOARDID_MATRIX_REV: 1064 name = "WIS Matrix Revolution or compatible"; 1065 board = &board_matrix_revolution; 1066 break; 1067 case GO7007_BOARDID_STAR_TREK: 1068 name = "WIS Star Trek or compatible"; 1069 board = &board_star_trek; 1070 break; 1071 case GO7007_BOARDID_XMEN: 1072 name = "WIS XMen or compatible"; 1073 board = &board_xmen; 1074 break; 1075 case GO7007_BOARDID_XMEN_II: 1076 name = "WIS XMen II or compatible"; 1077 board = &board_xmen; 1078 break; 1079 case GO7007_BOARDID_XMEN_III: 1080 name = "WIS XMen III or compatible"; 1081 board = &board_xmen; 1082 break; 1083 case GO7007_BOARDID_PX_M402U: 1084 name = "Plextor PX-M402U"; 1085 board = &board_matrix_ii; 1086 break; 1087 case GO7007_BOARDID_PX_TV402U: 1088 name = "Plextor PX-TV402U (unknown tuner)"; 1089 board = &board_px_tv402u; 1090 break; 1091 case GO7007_BOARDID_LIFEVIEW_LR192: 1092 dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n"); 1093 return -ENODEV; 1094 #if 0 1095 name = "Lifeview TV Walker Ultra"; 1096 board = &board_lifeview_lr192; 1097 #endif 1098 break; 1099 case GO7007_BOARDID_SENSORAY_2250: 1100 dev_info(&intf->dev, "Sensoray 2250 found\n"); 1101 name = "Sensoray 2250/2251"; 1102 board = &board_sensoray_2250; 1103 break; 1104 case GO7007_BOARDID_ADS_USBAV_709: 1105 name = "ADS Tech DVD Xpress DX2"; 1106 board = &board_ads_usbav_709; 1107 break; 1108 default: 1109 dev_err(&intf->dev, "unknown board ID %d!\n", 1110 (unsigned int)id->driver_info); 1111 return -ENODEV; 1112 } 1113 1114 go = go7007_alloc(&board->main_info, &intf->dev); 1115 if (go == NULL) 1116 return -ENOMEM; 1117 1118 usb = kzalloc(sizeof(struct go7007_usb), GFP_KERNEL); 1119 if (usb == NULL) { 1120 kfree(go); 1121 return -ENOMEM; 1122 } 1123 1124 usb->board = board; 1125 usb->usbdev = usbdev; 1126 usb_make_path(usbdev, go->bus_info, sizeof(go->bus_info)); 1127 go->board_id = id->driver_info; 1128 strscpy(go->name, name, sizeof(go->name)); 1129 if (board->flags & GO7007_USB_EZUSB) 1130 go->hpi_ops = &go7007_usb_ezusb_hpi_ops; 1131 else 1132 go->hpi_ops = &go7007_usb_onboard_hpi_ops; 1133 go->hpi_context = usb; 1134 1135 ep = usb->usbdev->ep_in[4]; 1136 if (!ep) 1137 goto allocfail; 1138 1139 /* Allocate the URB and buffer for receiving incoming interrupts */ 1140 usb->intr_urb = usb_alloc_urb(0, GFP_KERNEL); 1141 if (usb->intr_urb == NULL) 1142 goto allocfail; 1143 usb->intr_urb->transfer_buffer = kmalloc_array(2, sizeof(u16), 1144 GFP_KERNEL); 1145 if (usb->intr_urb->transfer_buffer == NULL) 1146 goto allocfail; 1147 1148 if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK) 1149 usb_fill_bulk_urb(usb->intr_urb, usb->usbdev, 1150 usb_rcvbulkpipe(usb->usbdev, 4), 1151 usb->intr_urb->transfer_buffer, 2*sizeof(u16), 1152 go7007_usb_readinterrupt_complete, go); 1153 else 1154 usb_fill_int_urb(usb->intr_urb, usb->usbdev, 1155 usb_rcvintpipe(usb->usbdev, 4), 1156 usb->intr_urb->transfer_buffer, 2*sizeof(u16), 1157 go7007_usb_readinterrupt_complete, go, 8); 1158 usb_set_intfdata(intf, &go->v4l2_dev); 1159 1160 /* Boot the GO7007 */ 1161 if (go7007_boot_encoder(go, go->board_info->flags & 1162 GO7007_BOARD_USE_ONBOARD_I2C) < 0) 1163 goto allocfail; 1164 1165 /* Register the EZ-USB I2C adapter, if we're using it */ 1166 if (board->flags & GO7007_USB_EZUSB_I2C) { 1167 memcpy(&go->i2c_adapter, &go7007_usb_adap_templ, 1168 sizeof(go7007_usb_adap_templ)); 1169 mutex_init(&usb->i2c_lock); 1170 go->i2c_adapter.dev.parent = go->dev; 1171 i2c_set_adapdata(&go->i2c_adapter, go); 1172 if (i2c_add_adapter(&go->i2c_adapter) < 0) { 1173 dev_err(go->dev, "error: i2c_add_adapter failed\n"); 1174 goto allocfail; 1175 } 1176 go->i2c_adapter_online = 1; 1177 } 1178 1179 /* Pelco and Adlink reused the XMen and XMen-III vendor and product 1180 * IDs for their own incompatible designs. We can detect XMen boards 1181 * by probing the sensor, but there is no way to probe the sensors on 1182 * the Pelco and Adlink designs so we default to the Adlink. If it 1183 * is actually a Pelco, the user must set the assume_endura module 1184 * parameter. */ 1185 if ((go->board_id == GO7007_BOARDID_XMEN || 1186 go->board_id == GO7007_BOARDID_XMEN_III) && 1187 go->i2c_adapter_online) { 1188 union i2c_smbus_data data; 1189 1190 /* Check to see if register 0x0A is 0x76 */ 1191 i2c_smbus_xfer(&go->i2c_adapter, 0x21, I2C_CLIENT_SCCB, 1192 I2C_SMBUS_READ, 0x0A, I2C_SMBUS_BYTE_DATA, &data); 1193 if (data.byte != 0x76) { 1194 if (assume_endura) { 1195 go->board_id = GO7007_BOARDID_ENDURA; 1196 usb->board = board = &board_endura; 1197 go->board_info = &board->main_info; 1198 strscpy(go->name, "Pelco Endura", 1199 sizeof(go->name)); 1200 } else { 1201 u16 channel; 1202 1203 /* read channel number from GPIO[1:0] */ 1204 go7007_read_addr(go, 0x3c81, &channel); 1205 channel &= 0x3; 1206 go->board_id = GO7007_BOARDID_ADLINK_MPG24; 1207 usb->board = board = &board_adlink_mpg24; 1208 go->board_info = &board->main_info; 1209 go->channel_number = channel; 1210 snprintf(go->name, sizeof(go->name), 1211 "Adlink PCI-MPG24, channel #%d", 1212 channel); 1213 } 1214 go7007_update_board(go); 1215 } 1216 } 1217 1218 num_i2c_devs = go->board_info->num_i2c_devs; 1219 1220 /* Probe the tuner model on the TV402U */ 1221 if (go->board_id == GO7007_BOARDID_PX_TV402U) { 1222 /* Board strapping indicates tuner model */ 1223 if (go7007_usb_vendor_request(go, 0x41, 0, 0, go->usb_buf, 3, 1224 1) < 0) { 1225 dev_err(go->dev, "GPIO read failed!\n"); 1226 goto allocfail; 1227 } 1228 switch (go->usb_buf[0] >> 6) { 1229 case 1: 1230 go->tuner_type = TUNER_SONY_BTF_PG472Z; 1231 go->std = V4L2_STD_PAL; 1232 strscpy(go->name, "Plextor PX-TV402U-EU", 1233 sizeof(go->name)); 1234 break; 1235 case 2: 1236 go->tuner_type = TUNER_SONY_BTF_PK467Z; 1237 go->std = V4L2_STD_NTSC_M_JP; 1238 num_i2c_devs -= 2; 1239 strscpy(go->name, "Plextor PX-TV402U-JP", 1240 sizeof(go->name)); 1241 break; 1242 case 3: 1243 go->tuner_type = TUNER_SONY_BTF_PB463Z; 1244 num_i2c_devs -= 2; 1245 strscpy(go->name, "Plextor PX-TV402U-NA", 1246 sizeof(go->name)); 1247 break; 1248 default: 1249 pr_debug("unable to detect tuner type!\n"); 1250 break; 1251 } 1252 /* Configure tuner mode selection inputs connected 1253 * to the EZ-USB GPIO output pins */ 1254 if (go7007_usb_vendor_request(go, 0x40, 0x7f02, 0, 1255 NULL, 0, 0) < 0) { 1256 dev_err(go->dev, "GPIO write failed!\n"); 1257 goto allocfail; 1258 } 1259 } 1260 1261 /* Print a nasty message if the user attempts to use a USB2.0 device in 1262 * a USB1.1 port. There will be silent corruption of the stream. */ 1263 if ((board->flags & GO7007_USB_EZUSB) && 1264 usbdev->speed != USB_SPEED_HIGH) 1265 dev_err(go->dev, "*** WARNING *** This device must be connected to a USB 2.0 port! Attempting to capture video through a USB 1.1 port will result in stream corruption, even at low bitrates!\n"); 1266 1267 /* Allocate the URBs and buffers for receiving the video stream */ 1268 if (board->flags & GO7007_USB_EZUSB) { 1269 if (!usb->usbdev->ep_in[6]) 1270 goto allocfail; 1271 v_urb_len = 1024; 1272 video_pipe = usb_rcvbulkpipe(usb->usbdev, 6); 1273 } else { 1274 if (!usb->usbdev->ep_in[1]) 1275 goto allocfail; 1276 v_urb_len = 512; 1277 video_pipe = usb_rcvbulkpipe(usb->usbdev, 1); 1278 } 1279 for (i = 0; i < 8; ++i) { 1280 usb->video_urbs[i] = usb_alloc_urb(0, GFP_KERNEL); 1281 if (usb->video_urbs[i] == NULL) 1282 goto allocfail; 1283 usb->video_urbs[i]->transfer_buffer = 1284 kmalloc(v_urb_len, GFP_KERNEL); 1285 if (usb->video_urbs[i]->transfer_buffer == NULL) 1286 goto allocfail; 1287 usb_fill_bulk_urb(usb->video_urbs[i], usb->usbdev, video_pipe, 1288 usb->video_urbs[i]->transfer_buffer, v_urb_len, 1289 go7007_usb_read_video_pipe_complete, go); 1290 } 1291 1292 /* Allocate the URBs and buffers for receiving the audio stream */ 1293 if ((board->flags & GO7007_USB_EZUSB) && 1294 (board->main_info.flags & GO7007_BOARD_HAS_AUDIO)) { 1295 if (!usb->usbdev->ep_in[8]) 1296 goto allocfail; 1297 for (i = 0; i < 8; ++i) { 1298 usb->audio_urbs[i] = usb_alloc_urb(0, GFP_KERNEL); 1299 if (usb->audio_urbs[i] == NULL) 1300 goto allocfail; 1301 usb->audio_urbs[i]->transfer_buffer = kmalloc(4096, 1302 GFP_KERNEL); 1303 if (usb->audio_urbs[i]->transfer_buffer == NULL) 1304 goto allocfail; 1305 usb_fill_bulk_urb(usb->audio_urbs[i], usb->usbdev, 1306 usb_rcvbulkpipe(usb->usbdev, 8), 1307 usb->audio_urbs[i]->transfer_buffer, 4096, 1308 go7007_usb_read_audio_pipe_complete, go); 1309 } 1310 } 1311 1312 /* Do any final GO7007 initialization, then register the 1313 * V4L2 and ALSA interfaces */ 1314 if (go7007_register_encoder(go, num_i2c_devs) < 0) 1315 goto allocfail; 1316 1317 go->status = STATUS_ONLINE; 1318 return 0; 1319 1320 allocfail: 1321 go7007_usb_release(go); 1322 kfree(go); 1323 return -ENOMEM; 1324 } 1325 1326 static void go7007_usb_disconnect(struct usb_interface *intf) 1327 { 1328 struct go7007 *go = to_go7007(usb_get_intfdata(intf)); 1329 1330 mutex_lock(&go->queue_lock); 1331 mutex_lock(&go->serialize_lock); 1332 1333 if (go->audio_enabled) 1334 go7007_snd_remove(go); 1335 1336 go->status = STATUS_SHUTDOWN; 1337 v4l2_device_disconnect(&go->v4l2_dev); 1338 video_unregister_device(&go->vdev); 1339 mutex_unlock(&go->serialize_lock); 1340 mutex_unlock(&go->queue_lock); 1341 1342 v4l2_device_put(&go->v4l2_dev); 1343 } 1344 1345 static struct usb_driver go7007_usb_driver = { 1346 .name = "go7007", 1347 .probe = go7007_usb_probe, 1348 .disconnect = go7007_usb_disconnect, 1349 .id_table = go7007_usb_id_table, 1350 }; 1351 1352 module_usb_driver(go7007_usb_driver); 1353 MODULE_LICENSE("GPL v2"); 1354