1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // em28xx-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices 4 // 5 // Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 // Markus Rechberger <mrechberger@gmail.com> 7 // Mauro Carvalho Chehab <mchehab@kernel.org> 8 // Sascha Sommer <saschasommer@freenet.de> 9 // Copyright (C) 2013 Frank Schäfer <fschaefer.oss@googlemail.com> 10 // 11 // This program is free software; you can redistribute it and/or modify 12 // it under the terms of the GNU General Public License as published by 13 // the Free Software Foundation; either version 2 of the License, or 14 // (at your option) any later version. 15 // 16 // This program is distributed in the hope that it will be useful, 17 // but WITHOUT ANY WARRANTY; without even the implied warranty of 18 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 // GNU General Public License for more details. 20 21 #include "em28xx.h" 22 23 #include <linux/module.h> 24 #include <linux/kernel.h> 25 #include <linux/usb.h> 26 #include <linux/i2c.h> 27 #include <linux/jiffies.h> 28 29 #include "tuner-xc2028.h" 30 #include <media/v4l2-common.h> 31 #include <media/tuner.h> 32 33 /* ----------------------------------------------------------- */ 34 35 static unsigned int i2c_scan; 36 module_param(i2c_scan, int, 0444); 37 MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); 38 39 static unsigned int i2c_debug; 40 module_param(i2c_debug, int, 0644); 41 MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I2C transfers)"); 42 43 #define dprintk(level, fmt, arg...) do { \ 44 if (i2c_debug > level) \ 45 dev_printk(KERN_DEBUG, &dev->intf->dev, \ 46 "i2c: %s: " fmt, __func__, ## arg); \ 47 } while (0) 48 49 /* 50 * Time in msecs to wait for i2c xfers to finish. 51 * 35ms is the maximum time a SMBUS device could wait when 52 * clock stretching is used. As the transfer itself will take 53 * some time to happen, set it to 35 ms. 54 * 55 * Ok, I2C doesn't specify any limit. So, eventually, we may need 56 * to increase this timeout. 57 */ 58 #define EM28XX_I2C_XFER_TIMEOUT 35 /* ms */ 59 60 static int em28xx_i2c_timeout(struct em28xx *dev) 61 { 62 int time = EM28XX_I2C_XFER_TIMEOUT; 63 64 switch (dev->i2c_speed & 0x03) { 65 case EM28XX_I2C_FREQ_25_KHZ: 66 time += 4; /* Assume 4 ms for transfers */ 67 break; 68 case EM28XX_I2C_FREQ_100_KHZ: 69 case EM28XX_I2C_FREQ_400_KHZ: 70 time += 1; /* Assume 1 ms for transfers */ 71 break; 72 default: /* EM28XX_I2C_FREQ_1_5_MHZ */ 73 break; 74 } 75 76 return msecs_to_jiffies(time); 77 } 78 79 /* 80 * em2800_i2c_send_bytes() 81 * send up to 4 bytes to the em2800 i2c device 82 */ 83 static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) 84 { 85 unsigned long timeout = jiffies + em28xx_i2c_timeout(dev); 86 int ret; 87 u8 b2[6]; 88 89 if (len < 1 || len > 4) 90 return -EOPNOTSUPP; 91 92 b2[5] = 0x80 + len - 1; 93 b2[4] = addr; 94 b2[3] = buf[0]; 95 if (len > 1) 96 b2[2] = buf[1]; 97 if (len > 2) 98 b2[1] = buf[2]; 99 if (len > 3) 100 b2[0] = buf[3]; 101 102 /* trigger write */ 103 ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len); 104 if (ret != 2 + len) { 105 dev_warn(&dev->intf->dev, 106 "failed to trigger write to i2c address 0x%x (error=%i)\n", 107 addr, ret); 108 return (ret < 0) ? ret : -EIO; 109 } 110 /* wait for completion */ 111 while (time_is_after_jiffies(timeout)) { 112 ret = dev->em28xx_read_reg(dev, 0x05); 113 if (ret == 0x80 + len - 1) 114 return len; 115 if (ret == 0x94 + len - 1) { 116 dprintk(1, "R05 returned 0x%02x: I2C ACK error\n", ret); 117 return -ENXIO; 118 } 119 if (ret < 0) { 120 dev_warn(&dev->intf->dev, 121 "failed to get i2c transfer status from bridge register (error=%i)\n", 122 ret); 123 return ret; 124 } 125 usleep_range(5000, 6000); 126 } 127 dprintk(0, "write to i2c device at 0x%x timed out\n", addr); 128 return -ETIMEDOUT; 129 } 130 131 /* 132 * em2800_i2c_recv_bytes() 133 * read up to 4 bytes from the em2800 i2c device 134 */ 135 static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) 136 { 137 unsigned long timeout = jiffies + em28xx_i2c_timeout(dev); 138 u8 buf2[4]; 139 int ret; 140 int i; 141 142 if (len < 1 || len > 4) 143 return -EOPNOTSUPP; 144 145 /* trigger read */ 146 buf2[1] = 0x84 + len - 1; 147 buf2[0] = addr; 148 ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2); 149 if (ret != 2) { 150 dev_warn(&dev->intf->dev, 151 "failed to trigger read from i2c address 0x%x (error=%i)\n", 152 addr, ret); 153 return (ret < 0) ? ret : -EIO; 154 } 155 156 /* wait for completion */ 157 while (time_is_after_jiffies(timeout)) { 158 ret = dev->em28xx_read_reg(dev, 0x05); 159 if (ret == 0x84 + len - 1) 160 break; 161 if (ret == 0x94 + len - 1) { 162 dprintk(1, "R05 returned 0x%02x: I2C ACK error\n", 163 ret); 164 return -ENXIO; 165 } 166 if (ret < 0) { 167 dev_warn(&dev->intf->dev, 168 "failed to get i2c transfer status from bridge register (error=%i)\n", 169 ret); 170 return ret; 171 } 172 usleep_range(5000, 6000); 173 } 174 if (ret != 0x84 + len - 1) 175 dprintk(0, "read from i2c device at 0x%x timed out\n", addr); 176 177 /* get the received message */ 178 ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4 - len, buf2, len); 179 if (ret != len) { 180 dev_warn(&dev->intf->dev, 181 "reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n", 182 addr, ret); 183 return (ret < 0) ? ret : -EIO; 184 } 185 for (i = 0; i < len; i++) 186 buf[i] = buf2[len - 1 - i]; 187 188 return ret; 189 } 190 191 /* 192 * em2800_i2c_check_for_device() 193 * check if there is an i2c device at the supplied address 194 */ 195 static int em2800_i2c_check_for_device(struct em28xx *dev, u8 addr) 196 { 197 u8 buf; 198 int ret; 199 200 ret = em2800_i2c_recv_bytes(dev, addr, &buf, 1); 201 if (ret == 1) 202 return 0; 203 return (ret < 0) ? ret : -EIO; 204 } 205 206 /* 207 * em28xx_i2c_send_bytes() 208 */ 209 static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, 210 u16 len, int stop) 211 { 212 unsigned long timeout = jiffies + em28xx_i2c_timeout(dev); 213 int ret; 214 215 if (len < 1 || len > 64) 216 return -EOPNOTSUPP; 217 /* 218 * NOTE: limited by the USB ctrl message constraints 219 * Zero length reads always succeed, even if no device is connected 220 */ 221 222 /* Write to i2c device */ 223 ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len); 224 if (ret != len) { 225 if (ret < 0) { 226 dev_warn(&dev->intf->dev, 227 "writing to i2c device at 0x%x failed (error=%i)\n", 228 addr, ret); 229 return ret; 230 } 231 dev_warn(&dev->intf->dev, 232 "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", 233 len, addr, ret); 234 return -EIO; 235 } 236 237 /* wait for completion */ 238 while (time_is_after_jiffies(timeout)) { 239 ret = dev->em28xx_read_reg(dev, 0x05); 240 if (ret == 0) /* success */ 241 return len; 242 if (ret == 0x10) { 243 dprintk(1, "I2C ACK error on writing to addr 0x%02x\n", 244 addr); 245 return -ENXIO; 246 } 247 if (ret < 0) { 248 dev_warn(&dev->intf->dev, 249 "failed to get i2c transfer status from bridge register (error=%i)\n", 250 ret); 251 return ret; 252 } 253 usleep_range(5000, 6000); 254 /* 255 * NOTE: do we really have to wait for success ? 256 * Never seen anything else than 0x00 or 0x10 257 * (even with high payload) ... 258 */ 259 } 260 261 if (ret == 0x02 || ret == 0x04) { 262 /* NOTE: these errors seem to be related to clock stretching */ 263 dprintk(0, 264 "write to i2c device at 0x%x timed out (status=%i)\n", 265 addr, ret); 266 return -ETIMEDOUT; 267 } 268 269 dev_warn(&dev->intf->dev, 270 "write to i2c device at 0x%x failed with unknown error (status=%i)\n", 271 addr, ret); 272 return -EIO; 273 } 274 275 /* 276 * em28xx_i2c_recv_bytes() 277 * read a byte from the i2c device 278 */ 279 static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) 280 { 281 int ret; 282 283 if (len < 1 || len > 64) 284 return -EOPNOTSUPP; 285 /* 286 * NOTE: limited by the USB ctrl message constraints 287 * Zero length reads always succeed, even if no device is connected 288 */ 289 290 /* Read data from i2c device */ 291 ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len); 292 if (ret < 0) { 293 dev_warn(&dev->intf->dev, 294 "reading from i2c device at 0x%x failed (error=%i)\n", 295 addr, ret); 296 return ret; 297 } 298 /* 299 * NOTE: some devices with two i2c busses have the bad habit to return 0 300 * bytes if we are on bus B AND there was no write attempt to the 301 * specified slave address before AND no device is present at the 302 * requested slave address. 303 * Anyway, the next check will fail with -ENXIO in this case, so avoid 304 * spamming the system log on device probing and do nothing here. 305 */ 306 307 /* Check success of the i2c operation */ 308 ret = dev->em28xx_read_reg(dev, 0x05); 309 if (ret == 0) /* success */ 310 return len; 311 if (ret < 0) { 312 dev_warn(&dev->intf->dev, 313 "failed to get i2c transfer status from bridge register (error=%i)\n", 314 ret); 315 return ret; 316 } 317 if (ret == 0x10) { 318 dprintk(1, "I2C ACK error on writing to addr 0x%02x\n", 319 addr); 320 return -ENXIO; 321 } 322 323 if (ret == 0x02 || ret == 0x04) { 324 /* NOTE: these errors seem to be related to clock stretching */ 325 dprintk(0, 326 "write to i2c device at 0x%x timed out (status=%i)\n", 327 addr, ret); 328 return -ETIMEDOUT; 329 } 330 331 dev_warn(&dev->intf->dev, 332 "write to i2c device at 0x%x failed with unknown error (status=%i)\n", 333 addr, ret); 334 return -EIO; 335 } 336 337 /* 338 * em28xx_i2c_check_for_device() 339 * check if there is a i2c_device at the supplied address 340 */ 341 static int em28xx_i2c_check_for_device(struct em28xx *dev, u16 addr) 342 { 343 int ret; 344 u8 buf; 345 346 ret = em28xx_i2c_recv_bytes(dev, addr, &buf, 1); 347 if (ret == 1) 348 return 0; 349 return (ret < 0) ? ret : -EIO; 350 } 351 352 /* 353 * em25xx_bus_B_send_bytes 354 * write bytes to the i2c device 355 */ 356 static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, 357 u16 len) 358 { 359 int ret; 360 361 if (len < 1 || len > 64) 362 return -EOPNOTSUPP; 363 /* 364 * NOTE: limited by the USB ctrl message constraints 365 * Zero length reads always succeed, even if no device is connected 366 */ 367 368 /* Set register and write value */ 369 ret = dev->em28xx_write_regs_req(dev, 0x06, addr, buf, len); 370 if (ret != len) { 371 if (ret < 0) { 372 dev_warn(&dev->intf->dev, 373 "writing to i2c device at 0x%x failed (error=%i)\n", 374 addr, ret); 375 return ret; 376 } 377 378 dev_warn(&dev->intf->dev, 379 "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", 380 len, addr, ret); 381 return -EIO; 382 } 383 /* Check success */ 384 ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000); 385 /* 386 * NOTE: the only error we've seen so far is 387 * 0x01 when the slave device is not present 388 */ 389 if (!ret) 390 return len; 391 392 if (ret > 0) { 393 dprintk(1, "Bus B R08 returned 0x%02x: I2C ACK error\n", ret); 394 return -ENXIO; 395 } 396 397 return ret; 398 /* 399 * NOTE: With chip types (other chip IDs) which actually don't support 400 * this operation, it seems to succeed ALWAYS ! (even if there is no 401 * slave device or even no second i2c bus provided) 402 */ 403 } 404 405 /* 406 * em25xx_bus_B_recv_bytes 407 * read bytes from the i2c device 408 */ 409 static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, 410 u16 len) 411 { 412 int ret; 413 414 if (len < 1 || len > 64) 415 return -EOPNOTSUPP; 416 /* 417 * NOTE: limited by the USB ctrl message constraints 418 * Zero length reads always succeed, even if no device is connected 419 */ 420 421 /* Read value */ 422 ret = dev->em28xx_read_reg_req_len(dev, 0x06, addr, buf, len); 423 if (ret < 0) { 424 dev_warn(&dev->intf->dev, 425 "reading from i2c device at 0x%x failed (error=%i)\n", 426 addr, ret); 427 return ret; 428 } 429 /* 430 * NOTE: some devices with two i2c busses have the bad habit to return 0 431 * bytes if we are on bus B AND there was no write attempt to the 432 * specified slave address before AND no device is present at the 433 * requested slave address. 434 * Anyway, the next check will fail with -ENXIO in this case, so avoid 435 * spamming the system log on device probing and do nothing here. 436 */ 437 438 /* Check success */ 439 ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000); 440 /* 441 * NOTE: the only error we've seen so far is 442 * 0x01 when the slave device is not present 443 */ 444 if (!ret) 445 return len; 446 447 if (ret > 0) { 448 dprintk(1, "Bus B R08 returned 0x%02x: I2C ACK error\n", ret); 449 return -ENXIO; 450 } 451 452 return ret; 453 /* 454 * NOTE: With chip types (other chip IDs) which actually don't support 455 * this operation, it seems to succeed ALWAYS ! (even if there is no 456 * slave device or even no second i2c bus provided) 457 */ 458 } 459 460 /* 461 * em25xx_bus_B_check_for_device() 462 * check if there is a i2c device at the supplied address 463 */ 464 static int em25xx_bus_B_check_for_device(struct em28xx *dev, u16 addr) 465 { 466 u8 buf; 467 int ret; 468 469 ret = em25xx_bus_B_recv_bytes(dev, addr, &buf, 1); 470 if (ret < 0) 471 return ret; 472 473 return 0; 474 /* 475 * NOTE: With chips which do not support this operation, 476 * it seems to succeed ALWAYS ! (even if no device connected) 477 */ 478 } 479 480 static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr) 481 { 482 struct em28xx *dev = i2c_bus->dev; 483 int rc = -EOPNOTSUPP; 484 485 if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) 486 rc = em28xx_i2c_check_for_device(dev, addr); 487 else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) 488 rc = em2800_i2c_check_for_device(dev, addr); 489 else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) 490 rc = em25xx_bus_B_check_for_device(dev, addr); 491 return rc; 492 } 493 494 static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus, 495 struct i2c_msg msg) 496 { 497 struct em28xx *dev = i2c_bus->dev; 498 u16 addr = msg.addr << 1; 499 int rc = -EOPNOTSUPP; 500 501 if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) 502 rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len); 503 else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) 504 rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len); 505 else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) 506 rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len); 507 return rc; 508 } 509 510 static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus, 511 struct i2c_msg msg, int stop) 512 { 513 struct em28xx *dev = i2c_bus->dev; 514 u16 addr = msg.addr << 1; 515 int rc = -EOPNOTSUPP; 516 517 if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) 518 rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop); 519 else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) 520 rc = em2800_i2c_send_bytes(dev, addr, msg.buf, msg.len); 521 else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) 522 rc = em25xx_bus_B_send_bytes(dev, addr, msg.buf, msg.len); 523 return rc; 524 } 525 526 /* 527 * em28xx_i2c_xfer() 528 * the main i2c transfer function 529 */ 530 static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, 531 struct i2c_msg msgs[], int num) 532 { 533 struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data; 534 struct em28xx *dev = i2c_bus->dev; 535 unsigned int bus = i2c_bus->bus; 536 int addr, rc, i; 537 u8 reg; 538 539 /* 540 * prevent i2c xfer attempts after device is disconnected 541 * some fe's try to do i2c writes/reads from their release 542 * interfaces when called in disconnect path 543 */ 544 if (dev->disconnected) 545 return -ENODEV; 546 547 if (!rt_mutex_trylock(&dev->i2c_bus_lock)) 548 return -EAGAIN; 549 550 /* Switch I2C bus if needed */ 551 if (bus != dev->cur_i2c_bus && 552 i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) { 553 if (bus == 1) 554 reg = EM2874_I2C_SECONDARY_BUS_SELECT; 555 else 556 reg = 0; 557 em28xx_write_reg_bits(dev, EM28XX_R06_I2C_CLK, reg, 558 EM2874_I2C_SECONDARY_BUS_SELECT); 559 dev->cur_i2c_bus = bus; 560 } 561 562 for (i = 0; i < num; i++) { 563 addr = msgs[i].addr << 1; 564 if (!msgs[i].len) { 565 /* 566 * no len: check only for device presence 567 * This code is only called during device probe. 568 */ 569 rc = i2c_check_for_device(i2c_bus, addr); 570 571 if (rc == -ENXIO) 572 rc = -ENODEV; 573 } else if (msgs[i].flags & I2C_M_RD) { 574 /* read bytes */ 575 rc = i2c_recv_bytes(i2c_bus, msgs[i]); 576 } else { 577 /* write bytes */ 578 rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1); 579 } 580 581 if (rc < 0) 582 goto error; 583 584 dprintk(2, "%s %s addr=%02x len=%d: %*ph\n", 585 (msgs[i].flags & I2C_M_RD) ? "read" : "write", 586 i == num - 1 ? "stop" : "nonstop", 587 addr, msgs[i].len, 588 msgs[i].len, msgs[i].buf); 589 } 590 591 rt_mutex_unlock(&dev->i2c_bus_lock); 592 return num; 593 594 error: 595 dprintk(2, "%s %s addr=%02x len=%d: %sERROR: %i\n", 596 (msgs[i].flags & I2C_M_RD) ? "read" : "write", 597 i == num - 1 ? "stop" : "nonstop", 598 addr, msgs[i].len, 599 (rc == -ENODEV) ? "no device " : "", 600 rc); 601 602 rt_mutex_unlock(&dev->i2c_bus_lock); 603 return rc; 604 } 605 606 /* 607 * based on linux/sunrpc/svcauth.h and linux/hash.h 608 * The original hash function returns a different value, if arch is x86_64 609 * or i386. 610 */ 611 static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits) 612 { 613 unsigned long hash = 0; 614 unsigned long l = 0; 615 int len = 0; 616 unsigned char c; 617 618 do { 619 if (len == length) { 620 c = (char)len; 621 len = -1; 622 } else { 623 c = *buf++; 624 } 625 l = (l << 8) | c; 626 len++; 627 if ((len & (32 / 8 - 1)) == 0) 628 hash = ((hash ^ l) * 0x9e370001UL); 629 } while (len); 630 631 return (hash >> (32 - bits)) & 0xffffffffUL; 632 } 633 634 /* 635 * Helper function to read data blocks from i2c clients with 8 or 16 bit 636 * address width, 8 bit register width and auto incrementation been activated 637 */ 638 static int em28xx_i2c_read_block(struct em28xx *dev, unsigned int bus, u16 addr, 639 bool addr_w16, u16 len, u8 *data) 640 { 641 int remain = len, rsize, rsize_max, ret; 642 u8 buf[2]; 643 644 /* Sanity check */ 645 if (addr + remain > (addr_w16 * 0xff00 + 0xff + 1)) 646 return -EINVAL; 647 /* Select address */ 648 buf[0] = addr >> 8; 649 buf[1] = addr & 0xff; 650 ret = i2c_master_send(&dev->i2c_client[bus], 651 buf + !addr_w16, 1 + addr_w16); 652 if (ret < 0) 653 return ret; 654 /* Read data */ 655 if (dev->board.is_em2800) 656 rsize_max = 4; 657 else 658 rsize_max = 64; 659 while (remain > 0) { 660 if (remain > rsize_max) 661 rsize = rsize_max; 662 else 663 rsize = remain; 664 665 ret = i2c_master_recv(&dev->i2c_client[bus], data, rsize); 666 if (ret < 0) 667 return ret; 668 669 remain -= rsize; 670 data += rsize; 671 } 672 673 return len; 674 } 675 676 static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned int bus, 677 u8 **eedata, u16 *eedata_len) 678 { 679 const u16 len = 256; 680 /* 681 * FIXME common length/size for bytes to read, to display, hash 682 * calculation and returned device dataset. Simplifies the code a lot, 683 * but we might have to deal with multiple sizes in the future ! 684 */ 685 int err; 686 struct em28xx_eeprom *dev_config; 687 u8 buf, *data; 688 689 *eedata = NULL; 690 *eedata_len = 0; 691 692 /* EEPROM is always on i2c bus 0 on all known devices. */ 693 694 dev->i2c_client[bus].addr = 0xa0 >> 1; 695 696 /* Check if board has eeprom */ 697 err = i2c_master_recv(&dev->i2c_client[bus], &buf, 0); 698 if (err < 0) { 699 dev_info(&dev->intf->dev, "board has no eeprom\n"); 700 return -ENODEV; 701 } 702 703 data = kzalloc(len, GFP_KERNEL); 704 if (!data) 705 return -ENOMEM; 706 707 /* Read EEPROM content */ 708 err = em28xx_i2c_read_block(dev, bus, 0x0000, 709 dev->eeprom_addrwidth_16bit, 710 len, data); 711 if (err != len) { 712 dev_err(&dev->intf->dev, 713 "failed to read eeprom (err=%d)\n", err); 714 goto error; 715 } 716 717 if (i2c_debug) { 718 /* Display eeprom content */ 719 print_hex_dump(KERN_DEBUG, "em28xx eeprom ", DUMP_PREFIX_OFFSET, 720 16, 1, data, len, true); 721 722 if (dev->eeprom_addrwidth_16bit) 723 dev_info(&dev->intf->dev, 724 "eeprom %06x: ... (skipped)\n", 256); 725 } 726 727 if (dev->eeprom_addrwidth_16bit && 728 data[0] == 0x26 && data[3] == 0x00) { 729 /* new eeprom format; size 4-64kb */ 730 u16 mc_start; 731 u16 hwconf_offset; 732 733 dev->hash = em28xx_hash_mem(data, len, 32); 734 mc_start = (data[1] << 8) + 4; /* usually 0x0004 */ 735 736 dev_info(&dev->intf->dev, 737 "EEPROM ID = %4ph, EEPROM hash = 0x%08lx\n", 738 data, dev->hash); 739 dev_info(&dev->intf->dev, 740 "EEPROM info:\n"); 741 dev_info(&dev->intf->dev, 742 "\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n", 743 mc_start, data[2]); 744 /* 745 * boot configuration (address 0x0002): 746 * [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz 747 * [1] always selects 12 kb RAM 748 * [2] USB device speed: 1 = force Full Speed; 0 = auto detect 749 * [4] 1 = force fast mode and no suspend for device testing 750 * [5:7] USB PHY tuning registers; determined by device 751 * characterization 752 */ 753 754 /* 755 * Read hardware config dataset offset from address 756 * (microcode start + 46) 757 */ 758 err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2, 759 data); 760 if (err != 2) { 761 dev_err(&dev->intf->dev, 762 "failed to read hardware configuration data from eeprom (err=%d)\n", 763 err); 764 goto error; 765 } 766 767 /* Calculate hardware config dataset start address */ 768 hwconf_offset = mc_start + data[0] + (data[1] << 8); 769 770 /* Read hardware config dataset */ 771 /* 772 * NOTE: the microcode copy can be multiple pages long, but 773 * we assume the hardware config dataset is the same as in 774 * the old eeprom and not longer than 256 bytes. 775 * tveeprom is currently also limited to 256 bytes. 776 */ 777 err = em28xx_i2c_read_block(dev, bus, hwconf_offset, 1, len, 778 data); 779 if (err != len) { 780 dev_err(&dev->intf->dev, 781 "failed to read hardware configuration data from eeprom (err=%d)\n", 782 err); 783 goto error; 784 } 785 786 /* Verify hardware config dataset */ 787 /* NOTE: not all devices provide this type of dataset */ 788 if (data[0] != 0x1a || data[1] != 0xeb || 789 data[2] != 0x67 || data[3] != 0x95) { 790 dev_info(&dev->intf->dev, 791 "\tno hardware configuration dataset found in eeprom\n"); 792 kfree(data); 793 return 0; 794 } 795 796 /* 797 * TODO: decrypt eeprom data for camera bridges 798 * (em25xx, em276x+) 799 */ 800 801 } else if (!dev->eeprom_addrwidth_16bit && 802 data[0] == 0x1a && data[1] == 0xeb && 803 data[2] == 0x67 && data[3] == 0x95) { 804 dev->hash = em28xx_hash_mem(data, len, 32); 805 dev_info(&dev->intf->dev, 806 "EEPROM ID = %4ph, EEPROM hash = 0x%08lx\n", 807 data, dev->hash); 808 dev_info(&dev->intf->dev, 809 "EEPROM info:\n"); 810 } else { 811 dev_info(&dev->intf->dev, 812 "unknown eeprom format or eeprom corrupted !\n"); 813 err = -ENODEV; 814 goto error; 815 } 816 817 *eedata = data; 818 *eedata_len = len; 819 dev_config = (void *)*eedata; 820 821 switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) { 822 case 0: 823 dev_info(&dev->intf->dev, "\tNo audio on board.\n"); 824 break; 825 case 1: 826 dev_info(&dev->intf->dev, "\tAC97 audio (5 sample rates)\n"); 827 break; 828 case 2: 829 if (dev->chip_id < CHIP_ID_EM2860) 830 dev_info(&dev->intf->dev, 831 "\tI2S audio, sample rate=32k\n"); 832 else 833 dev_info(&dev->intf->dev, 834 "\tI2S audio, 3 sample rates\n"); 835 break; 836 case 3: 837 if (dev->chip_id < CHIP_ID_EM2860) 838 dev_info(&dev->intf->dev, 839 "\tI2S audio, 3 sample rates\n"); 840 else 841 dev_info(&dev->intf->dev, 842 "\tI2S audio, 5 sample rates\n"); 843 break; 844 } 845 846 if (le16_to_cpu(dev_config->chip_conf) & 1 << 3) 847 dev_info(&dev->intf->dev, "\tUSB Remote wakeup capable\n"); 848 849 if (le16_to_cpu(dev_config->chip_conf) & 1 << 2) 850 dev_info(&dev->intf->dev, "\tUSB Self power capable\n"); 851 852 switch (le16_to_cpu(dev_config->chip_conf) & 0x3) { 853 case 0: 854 dev_info(&dev->intf->dev, "\t500mA max power\n"); 855 break; 856 case 1: 857 dev_info(&dev->intf->dev, "\t400mA max power\n"); 858 break; 859 case 2: 860 dev_info(&dev->intf->dev, "\t300mA max power\n"); 861 break; 862 case 3: 863 dev_info(&dev->intf->dev, "\t200mA max power\n"); 864 break; 865 } 866 dev_info(&dev->intf->dev, 867 "\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n", 868 dev_config->string_idx_table, 869 le16_to_cpu(dev_config->string1), 870 le16_to_cpu(dev_config->string2), 871 le16_to_cpu(dev_config->string3)); 872 873 return 0; 874 875 error: 876 kfree(data); 877 return err; 878 } 879 880 /* ----------------------------------------------------------- */ 881 882 /* 883 * functionality() 884 */ 885 static u32 functionality(struct i2c_adapter *i2c_adap) 886 { 887 struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data; 888 889 if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX || 890 i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) { 891 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 892 } else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) { 893 return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL) & 894 ~I2C_FUNC_SMBUS_WRITE_BLOCK_DATA; 895 } 896 897 WARN(1, "Unknown i2c bus algorithm.\n"); 898 return 0; 899 } 900 901 static const struct i2c_algorithm em28xx_algo = { 902 .master_xfer = em28xx_i2c_xfer, 903 .functionality = functionality, 904 }; 905 906 static const struct i2c_adapter em28xx_adap_template = { 907 .owner = THIS_MODULE, 908 .name = "em28xx", 909 .algo = &em28xx_algo, 910 }; 911 912 static const struct i2c_client em28xx_client_template = { 913 .name = "em28xx internal", 914 }; 915 916 /* ----------------------------------------------------------- */ 917 918 /* 919 * i2c_devs 920 * incomplete list of known devices 921 */ 922 static char *i2c_devs[128] = { 923 [0x1c >> 1] = "lgdt330x", 924 [0x3e >> 1] = "remote IR sensor", 925 [0x4a >> 1] = "saa7113h", 926 [0x52 >> 1] = "drxk", 927 [0x60 >> 1] = "remote IR sensor", 928 [0x8e >> 1] = "remote IR sensor", 929 [0x86 >> 1] = "tda9887", 930 [0x80 >> 1] = "msp34xx", 931 [0x88 >> 1] = "msp34xx", 932 [0xa0 >> 1] = "eeprom", 933 [0xb0 >> 1] = "tda9874", 934 [0xb8 >> 1] = "tvp5150a", 935 [0xba >> 1] = "webcam sensor or tvp5150a", 936 [0xc0 >> 1] = "tuner (analog)", 937 [0xc2 >> 1] = "tuner (analog)", 938 [0xc4 >> 1] = "tuner (analog)", 939 [0xc6 >> 1] = "tuner (analog)", 940 }; 941 942 /* 943 * do_i2c_scan() 944 * check i2c address range for devices 945 */ 946 void em28xx_do_i2c_scan(struct em28xx *dev, unsigned int bus) 947 { 948 u8 i2c_devicelist[128]; 949 unsigned char buf; 950 int i, rc; 951 952 memset(i2c_devicelist, 0, ARRAY_SIZE(i2c_devicelist)); 953 954 for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) { 955 dev->i2c_client[bus].addr = i; 956 rc = i2c_master_recv(&dev->i2c_client[bus], &buf, 0); 957 if (rc < 0) 958 continue; 959 i2c_devicelist[i] = i; 960 dev_info(&dev->intf->dev, 961 "found i2c device @ 0x%x on bus %d [%s]\n", 962 i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???"); 963 } 964 965 if (bus == dev->def_i2c_bus) 966 dev->i2c_hash = em28xx_hash_mem(i2c_devicelist, 967 ARRAY_SIZE(i2c_devicelist), 32); 968 } 969 970 /* 971 * em28xx_i2c_register() 972 * register i2c bus 973 */ 974 int em28xx_i2c_register(struct em28xx *dev, unsigned int bus, 975 enum em28xx_i2c_algo_type algo_type) 976 { 977 int retval; 978 979 if (WARN_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg || 980 !dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req)) 981 return -ENODEV; 982 983 if (bus >= NUM_I2C_BUSES) 984 return -ENODEV; 985 986 dev->i2c_adap[bus] = em28xx_adap_template; 987 dev->i2c_adap[bus].dev.parent = &dev->intf->dev; 988 strcpy(dev->i2c_adap[bus].name, dev_name(&dev->intf->dev)); 989 990 dev->i2c_bus[bus].bus = bus; 991 dev->i2c_bus[bus].algo_type = algo_type; 992 dev->i2c_bus[bus].dev = dev; 993 dev->i2c_adap[bus].algo_data = &dev->i2c_bus[bus]; 994 995 retval = i2c_add_adapter(&dev->i2c_adap[bus]); 996 if (retval < 0) { 997 dev_err(&dev->intf->dev, 998 "%s: i2c_add_adapter failed! retval [%d]\n", 999 __func__, retval); 1000 return retval; 1001 } 1002 1003 dev->i2c_client[bus] = em28xx_client_template; 1004 dev->i2c_client[bus].adapter = &dev->i2c_adap[bus]; 1005 1006 /* Up to now, all eeproms are at bus 0 */ 1007 if (!bus) { 1008 retval = em28xx_i2c_eeprom(dev, bus, 1009 &dev->eedata, &dev->eedata_len); 1010 if (retval < 0 && retval != -ENODEV) { 1011 dev_err(&dev->intf->dev, 1012 "%s: em28xx_i2_eeprom failed! retval [%d]\n", 1013 __func__, retval); 1014 } 1015 } 1016 1017 if (i2c_scan) 1018 em28xx_do_i2c_scan(dev, bus); 1019 1020 return 0; 1021 } 1022 1023 /* 1024 * em28xx_i2c_unregister() 1025 * unregister i2c_bus 1026 */ 1027 int em28xx_i2c_unregister(struct em28xx *dev, unsigned int bus) 1028 { 1029 if (bus >= NUM_I2C_BUSES) 1030 return -ENODEV; 1031 1032 i2c_del_adapter(&dev->i2c_adap[bus]); 1033 return 0; 1034 } 1035