1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 4 // video capture devices 5 // 6 // Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 7 // Markus Rechberger <mrechberger@gmail.com> 8 // Mauro Carvalho Chehab <mchehab@kernel.org> 9 // Sascha Sommer <saschasommer@freenet.de> 10 // Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 11 // 12 // This program is free software; you can redistribute it and/or modify 13 // it under the terms of the GNU General Public License as published by 14 // the Free Software Foundation; either version 2 of the License, or 15 // (at your option) any later version. 16 // 17 // This program is distributed in the hope that it will be useful, 18 // but WITHOUT ANY WARRANTY; without even the implied warranty of 19 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 // GNU General Public License for more details. 21 22 #include "em28xx.h" 23 24 #include <linux/init.h> 25 #include <linux/module.h> 26 #include <linux/slab.h> 27 #include <linux/delay.h> 28 #include <linux/i2c.h> 29 #include <linux/usb.h> 30 #include <media/tuner.h> 31 #include <media/drv-intf/msp3400.h> 32 #include <media/i2c/saa7115.h> 33 #include <dt-bindings/media/tvp5150.h> 34 #include <media/i2c/tvaudio.h> 35 #include <media/tveeprom.h> 36 #include <media/v4l2-common.h> 37 #include <sound/ac97_codec.h> 38 39 #define DRIVER_NAME "em28xx" 40 41 static int tuner = -1; 42 module_param(tuner, int, 0444); 43 MODULE_PARM_DESC(tuner, "tuner type"); 44 45 static unsigned int disable_ir; 46 module_param(disable_ir, int, 0444); 47 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 48 49 static unsigned int disable_usb_speed_check; 50 module_param(disable_usb_speed_check, int, 0444); 51 MODULE_PARM_DESC(disable_usb_speed_check, 52 "override min bandwidth requirement of 480M bps"); 53 54 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 55 module_param_array(card, int, NULL, 0444); 56 MODULE_PARM_DESC(card, "card type"); 57 58 static int usb_xfer_mode = -1; 59 module_param(usb_xfer_mode, int, 0444); 60 MODULE_PARM_DESC(usb_xfer_mode, 61 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 62 63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 64 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 65 66 struct em28xx_hash_table { 67 unsigned long hash; 68 unsigned int model; 69 unsigned int tuner; 70 }; 71 72 static void em28xx_pre_card_setup(struct em28xx *dev); 73 74 /* 75 * Reset sequences for analog/digital modes 76 */ 77 78 /* Reset for the most [analog] boards */ 79 static const struct em28xx_reg_seq default_analog[] = { 80 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 81 { -1, -1, -1, -1}, 82 }; 83 84 /* Reset for the most [digital] boards */ 85 static const struct em28xx_reg_seq default_digital[] = { 86 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 87 { -1, -1, -1, -1}, 88 }; 89 90 /* Board :Zolid Hybrid Tv Stick */ 91 static struct em28xx_reg_seq zolid_tuner[] = { 92 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100}, 93 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100}, 94 { -1, -1, -1, -1}, 95 }; 96 97 static struct em28xx_reg_seq zolid_digital[] = { 98 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100}, 99 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100}, 100 {EM2880_R04_GPO, 0x04, 0xff, 100}, 101 {EM2880_R04_GPO, 0x0c, 0xff, 100}, 102 { -1, -1, -1, -1}, 103 }; 104 105 /* Board Hauppauge WinTV HVR 900 analog */ 106 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 107 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 108 { 0x05, 0xff, 0x10, 10}, 109 { -1, -1, -1, -1}, 110 }; 111 112 /* Board Hauppauge WinTV HVR 900 digital */ 113 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 114 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 115 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 116 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 117 { -1, -1, -1, -1}, 118 }; 119 120 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 121 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 122 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 123 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 124 { -1, -1, -1, -1}, 125 }; 126 127 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 128 static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 129 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 130 { -1, -1, -1, -1}, 131 }; 132 133 /* Board - EM2882 Kworld 315U digital */ 134 static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 135 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 136 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 137 {EM2880_R04_GPO, 0x04, 0xff, 10}, 138 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 139 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 140 { -1, -1, -1, -1}, 141 }; 142 143 static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 144 {EM2880_R04_GPO, 0x08, 0xff, 10}, 145 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 146 {EM2880_R04_GPO, 0x08, 0xff, 10}, 147 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 148 { -1, -1, -1, -1}, 149 }; 150 151 static const struct em28xx_reg_seq kworld_330u_analog[] = { 152 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 153 {EM2880_R04_GPO, 0x00, 0xff, 10}, 154 { -1, -1, -1, -1}, 155 }; 156 157 static const struct em28xx_reg_seq kworld_330u_digital[] = { 158 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 159 {EM2880_R04_GPO, 0x08, 0xff, 10}, 160 { -1, -1, -1, -1}, 161 }; 162 163 /* 164 * Evga inDtube 165 * GPIO0 - Enable digital power (s5h1409) - low to enable 166 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 167 * GPIO4 - xc3028 reset 168 * GOP3 - s5h1409 reset 169 */ 170 static const struct em28xx_reg_seq evga_indtube_analog[] = { 171 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 172 { -1, -1, -1, -1}, 173 }; 174 175 static const struct em28xx_reg_seq evga_indtube_digital[] = { 176 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 177 {EM2880_R04_GPO, 0x04, 0xff, 10}, 178 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 179 { -1, -1, -1, -1}, 180 }; 181 182 /* 183 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 184 * EM_GPIO_0 - currently unknown 185 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 186 * EM_GPIO_2 - currently unknown 187 * EM_GPIO_3 - currently unknown 188 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 189 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 190 * EM_GPIO_6 - currently unknown 191 * EM_GPIO_7 - currently unknown 192 */ 193 static const struct em28xx_reg_seq kworld_a340_digital[] = { 194 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 195 { -1, -1, -1, -1}, 196 }; 197 198 static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 199 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 200 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 201 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 202 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 203 { -1, -1, -1, -1}, 204 }; 205 206 /* Pinnacle Hybrid Pro eb1a:2881 */ 207 static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 208 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 209 { -1, -1, -1, -1}, 210 }; 211 212 static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 213 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 214 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 215 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 216 { -1, -1, -1, -1}, 217 }; 218 219 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 220 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 221 {EM2880_R04_GPO, 0x00, 0xff, 10}, 222 { -1, -1, -1, -1}, 223 }; 224 225 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 226 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 227 {EM2880_R04_GPO, 0x08, 0xff, 10}, 228 { -1, -1, -1, -1}, 229 }; 230 231 /* 232 * PCTV HD Mini (80e) GPIOs 233 * 0-5: not used 234 * 6: demod reset, active low 235 * 7: LED on, active high 236 */ 237 static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 238 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 239 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 240 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 241 { -1, -1, -1, -1}, 242 }; 243 244 /* 245 * eb1a:2868 Reddo DVB-C USB TV Box 246 * GPIO4 - CU1216L NIM 247 * Other GPIOs seems to be don't care. 248 */ 249 static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 250 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 251 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 252 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 253 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 254 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 255 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 256 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 257 { -1, -1, -1, -1}, 258 }; 259 260 /* Callback for the most boards */ 261 static const struct em28xx_reg_seq default_tuner_gpio[] = { 262 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 263 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 264 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 265 { -1, -1, -1, -1}, 266 }; 267 268 /* Mute/unmute */ 269 static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 270 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 271 { -1, -1, -1, -1}, 272 }; 273 274 static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 275 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 276 { -1, -1, -1, -1}, 277 }; 278 279 static const struct em28xx_reg_seq compro_mute_gpio[] = { 280 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 281 { -1, -1, -1, -1}, 282 }; 283 284 /* Terratec AV350 */ 285 static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 286 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 287 { -1, -1, -1, -1}, 288 }; 289 290 static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 291 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 292 { -1, -1, -1, -1}, 293 }; 294 295 static const struct em28xx_reg_seq silvercrest_reg_seq[] = { 296 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 297 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 298 { -1, -1, -1, -1}, 299 }; 300 301 static const struct em28xx_reg_seq vc211a_enable[] = { 302 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 303 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 304 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 305 { -1, -1, -1, -1}, 306 }; 307 308 static const struct em28xx_reg_seq dikom_dk300_digital[] = { 309 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 310 {EM2880_R04_GPO, 0x08, 0xff, 10}, 311 { -1, -1, -1, -1}, 312 }; 313 314 /* Reset for the most [digital] boards */ 315 static const struct em28xx_reg_seq leadership_digital[] = { 316 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 317 { -1, -1, -1, -1}, 318 }; 319 320 static const struct em28xx_reg_seq leadership_reset[] = { 321 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 322 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 323 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 324 { -1, -1, -1, -1}, 325 }; 326 327 /* 328 * 2013:024f PCTV nanoStick T2 290e 329 * GPIO_6 - demod reset 330 * GPIO_7 - LED 331 */ 332 static const struct em28xx_reg_seq pctv_290e[] = { 333 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 334 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 335 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 336 { -1, -1, -1, -1}, 337 }; 338 339 #if 0 340 static const struct em28xx_reg_seq terratec_h5_gpio[] = { 341 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 342 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 343 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 344 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 345 { -1, -1, -1, -1}, 346 }; 347 348 static const struct em28xx_reg_seq terratec_h5_digital[] = { 349 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 350 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 351 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 352 { -1, -1, -1, -1}, 353 }; 354 #endif 355 356 /* 357 * 2013:024f PCTV DVB-S2 Stick 460e 358 * GPIO_0 - POWER_ON 359 * GPIO_1 - BOOST 360 * GPIO_2 - VUV_LNB (red LED) 361 * GPIO_3 - EXT_12V 362 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 363 * GPIO_5 - INT_LNB 364 * GPIO_6 - RESET_DEM 365 * GPIO_7 - LED (green LED) 366 */ 367 static const struct em28xx_reg_seq pctv_460e[] = { 368 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 369 { 0x0d, 0xff, 0xff, 50}, 370 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 371 { 0x0d, 0x42, 0xff, 50}, 372 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 373 { -1, -1, -1, -1}, 374 }; 375 376 static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 377 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 378 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 379 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 380 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 381 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 382 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 383 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 384 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 385 { -1, -1, -1, -1}, 386 }; 387 388 /* 389 * 2013:0258 PCTV DVB-S2 Stick (461e) 390 * GPIO 0 = POWER_ON 391 * GPIO 1 = BOOST 392 * GPIO 2 = VUV_LNB (red LED) 393 * GPIO 3 = #EXT_12V 394 * GPIO 4 = INT_DEM 395 * GPIO 5 = INT_LNB 396 * GPIO 6 = #RESET_DEM 397 * GPIO 7 = P07_LED (green LED) 398 */ 399 static const struct em28xx_reg_seq pctv_461e[] = { 400 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 401 {0x0d, 0xff, 0xff, 0}, 402 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 403 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 404 {0x0d, 0x42, 0xff, 0}, 405 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 406 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 407 { -1, -1, -1, -1}, 408 }; 409 410 #if 0 411 static const struct em28xx_reg_seq hauppauge_930c_gpio[] = { 412 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 413 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 414 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 415 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 416 { -1, -1, -1, -1}, 417 }; 418 419 static const struct em28xx_reg_seq hauppauge_930c_digital[] = { 420 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 421 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 422 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 423 { -1, -1, -1, -1}, 424 }; 425 #endif 426 427 /* 428 * 1b80:e425 MaxMedia UB425-TC 429 * 1b80:e1cc Delock 61959 430 * GPIO_6 - demod reset, 0=active 431 * GPIO_7 - LED, 0=active 432 */ 433 static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { 434 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 435 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 436 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 437 { -1, -1, -1, -1}, 438 }; 439 440 /* 441 * 2304:0242 PCTV QuatroStick (510e) 442 * GPIO_2: decoder reset, 0=active 443 * GPIO_4: decoder suspend, 0=active 444 * GPIO_6: demod reset, 0=active 445 * GPIO_7: LED, 1=active 446 */ 447 static const struct em28xx_reg_seq pctv_510e[] = { 448 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 449 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 450 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 451 { -1, -1, -1, -1}, 452 }; 453 454 /* 455 * 2013:0251 PCTV QuatroStick nano (520e) 456 * GPIO_2: decoder reset, 0=active 457 * GPIO_4: decoder suspend, 0=active 458 * GPIO_6: demod reset, 0=active 459 * GPIO_7: LED, 1=active 460 */ 461 static const struct em28xx_reg_seq pctv_520e[] = { 462 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 463 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 464 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 465 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 466 { -1, -1, -1, -1}, 467 }; 468 469 /* 470 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 471 * reg 0x80/0x84: 472 * GPIO_0: capturing LED, 0=on, 1=off 473 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 474 * GPIO 3: illumination button, 0=pressed, 1=unpressed 475 * GPIO_6: illumination/flash LED, 0=on, 1=off 476 * reg 0x81/0x85: 477 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 478 */ 479 static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 480 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 481 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 482 { -1, -1, -1, -1}, 483 }; 484 485 static const struct em28xx_reg_seq pctv_292e[] = { 486 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 487 {0x0d, 0xff, 0xff, 950}, 488 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 489 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 490 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 491 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 492 {0x0d, 0x42, 0xff, 50}, 493 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 494 {-1, -1, -1, -1}, 495 }; 496 497 static const struct em28xx_reg_seq terratec_t2_stick_hd[] = { 498 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 499 {0x0d, 0xff, 0xff, 600}, 500 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 501 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 502 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 503 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 504 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 505 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 506 {0x0d, 0x42, 0xff, 1000}, 507 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 508 {-1, -1, -1, -1}, 509 }; 510 511 static const struct em28xx_reg_seq plex_px_bcud[] = { 512 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 513 {0x0d, 0xff, 0xff, 0}, 514 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, 515 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, 516 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, 517 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, 518 {0x0d, 0x42, 0xff, 1000}, 519 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 520 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 521 {0x73, 0xfd, 0xff, 100}, 522 {-1, -1, -1, -1}, 523 }; 524 525 /* 526 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc 527 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk 528 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc 529 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk 530 * reg 0x80/0x84: 531 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off 532 * GPIO_1: Green LED tuner 1, 0=on, 1=off 533 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off 534 * GPIO_3: Green LED tuner 2, 0=on, 1=off 535 * GPIO_5: Reset #2, 0=active 536 * GPIO_6: Reset #1, 0=active 537 */ 538 static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { 539 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 540 {0x0d, 0xff, 0xff, 200}, 541 {0x50, 0x04, 0xff, 300}, 542 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ 543 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 544 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ 545 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 546 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */ 547 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 548 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 549 {-1, -1, -1, -1}, 550 }; 551 552 /* Hauppauge USB QuadHD */ 553 static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = { 554 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 555 {0x0d, 0xff, 0xff, 200}, 556 {0x50, 0x04, 0xff, 300}, 557 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */ 558 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, 559 {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */ 560 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, 561 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50}, 562 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 563 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 564 {-1, -1, -1, -1}, 565 }; 566 567 /* 568 * Button definitions 569 */ 570 static const struct em28xx_button std_snapshot_button[] = { 571 { 572 .role = EM28XX_BUTTON_SNAPSHOT, 573 .reg_r = EM28XX_R0C_USBSUSP, 574 .reg_clearing = EM28XX_R0C_USBSUSP, 575 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 576 .inverted = 0, 577 }, 578 {-1, 0, 0, 0, 0}, 579 }; 580 581 static const struct em28xx_button speedlink_vad_laplace_buttons[] = { 582 { 583 .role = EM28XX_BUTTON_SNAPSHOT, 584 .reg_r = EM2874_R85_GPIO_P1_STATE, 585 .mask = 0x80, 586 .inverted = 1, 587 }, 588 { 589 .role = EM28XX_BUTTON_ILLUMINATION, 590 .reg_r = EM2874_R84_GPIO_P0_STATE, 591 .mask = 0x08, 592 .inverted = 1, 593 }, 594 {-1, 0, 0, 0, 0}, 595 }; 596 597 /* 598 * LED definitions 599 */ 600 static struct em28xx_led speedlink_vad_laplace_leds[] = { 601 { 602 .role = EM28XX_LED_ANALOG_CAPTURING, 603 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 604 .gpio_mask = 0x01, 605 .inverted = 1, 606 }, 607 { 608 .role = EM28XX_LED_ILLUMINATION, 609 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 610 .gpio_mask = 0x40, 611 .inverted = 1, 612 }, 613 {-1, 0, 0, 0}, 614 }; 615 616 static struct em28xx_led kworld_ub435q_v3_leds[] = { 617 { 618 .role = EM28XX_LED_DIGITAL_CAPTURING, 619 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 620 .gpio_mask = 0x80, 621 .inverted = 1, 622 }, 623 {-1, 0, 0, 0}, 624 }; 625 626 static struct em28xx_led pctv_80e_leds[] = { 627 { 628 .role = EM28XX_LED_DIGITAL_CAPTURING, 629 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 630 .gpio_mask = 0x80, 631 .inverted = 0, 632 }, 633 {-1, 0, 0, 0}, 634 }; 635 636 static struct em28xx_led terratec_grabby_leds[] = { 637 { 638 .role = EM28XX_LED_ANALOG_CAPTURING, 639 .gpio_reg = EM2820_R08_GPIO_CTRL, 640 .gpio_mask = EM_GPIO_3, 641 .inverted = 1, 642 }, 643 {-1, 0, 0, 0}, 644 }; 645 646 static struct em28xx_led hauppauge_dualhd_leds[] = { 647 { 648 .role = EM28XX_LED_DIGITAL_CAPTURING, 649 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 650 .gpio_mask = EM_GPIO_1, 651 .inverted = 1, 652 }, 653 { 654 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 655 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 656 .gpio_mask = EM_GPIO_3, 657 .inverted = 1, 658 }, 659 {-1, 0, 0, 0}, 660 }; 661 662 static struct em28xx_led hauppauge_usb_quadhd_leds[] = { 663 { 664 .role = EM28XX_LED_DIGITAL_CAPTURING, 665 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 666 .gpio_mask = EM_GPIO_2, 667 .inverted = 1, 668 }, 669 { 670 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 671 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 672 .gpio_mask = EM_GPIO_0, 673 .inverted = 1, 674 }, 675 {-1, 0, 0, 0}, 676 }; 677 678 /* 679 * Board definitions 680 */ 681 const struct em28xx_board em28xx_boards[] = { 682 [EM2750_BOARD_UNKNOWN] = { 683 .name = "EM2710/EM2750/EM2751 webcam grabber", 684 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 685 .tuner_type = TUNER_ABSENT, 686 .is_webcam = 1, 687 .input = { { 688 .type = EM28XX_VMUX_COMPOSITE, 689 .vmux = 0, 690 .amux = EM28XX_AMUX_VIDEO, 691 .gpio = silvercrest_reg_seq, 692 } }, 693 }, 694 [EM2800_BOARD_UNKNOWN] = { 695 .name = "Unknown EM2800 video grabber", 696 .is_em2800 = 1, 697 .tda9887_conf = TDA9887_PRESENT, 698 .decoder = EM28XX_SAA711X, 699 .tuner_type = TUNER_ABSENT, 700 .input = { { 701 .type = EM28XX_VMUX_COMPOSITE, 702 .vmux = SAA7115_COMPOSITE0, 703 .amux = EM28XX_AMUX_LINE_IN, 704 }, { 705 .type = EM28XX_VMUX_SVIDEO, 706 .vmux = SAA7115_SVIDEO3, 707 .amux = EM28XX_AMUX_LINE_IN, 708 } }, 709 }, 710 [EM2820_BOARD_UNKNOWN] = { 711 .name = "Unknown EM2750/28xx video grabber", 712 .tuner_type = TUNER_ABSENT, 713 .is_webcam = 1, /* To enable sensor probe */ 714 }, 715 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = { 716 .name = ":ZOLID HYBRID TV STICK", 717 .tuner_type = TUNER_XC2028, 718 .tuner_gpio = zolid_tuner, 719 .decoder = EM28XX_TVP5150, 720 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 721 .mts_firmware = 1, 722 .has_dvb = 1, 723 .dvb_gpio = zolid_digital, 724 }, 725 [EM2750_BOARD_DLCW_130] = { 726 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 727 .name = "Huaqi DLCW-130", 728 .valid = EM28XX_BOARD_NOT_VALIDATED, 729 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 730 .tuner_type = TUNER_ABSENT, 731 .is_webcam = 1, 732 .input = { { 733 .type = EM28XX_VMUX_COMPOSITE, 734 .vmux = 0, 735 .amux = EM28XX_AMUX_VIDEO, 736 } }, 737 }, 738 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 739 .name = "Kworld PVR TV 2800 RF", 740 .tuner_type = TUNER_TEMIC_PAL, 741 .tda9887_conf = TDA9887_PRESENT, 742 .decoder = EM28XX_SAA711X, 743 .input = { { 744 .type = EM28XX_VMUX_COMPOSITE, 745 .vmux = SAA7115_COMPOSITE0, 746 .amux = EM28XX_AMUX_LINE_IN, 747 }, { 748 .type = EM28XX_VMUX_SVIDEO, 749 .vmux = SAA7115_SVIDEO3, 750 .amux = EM28XX_AMUX_LINE_IN, 751 } }, 752 }, 753 [EM2820_BOARD_GADMEI_TVR200] = { 754 .name = "Gadmei TVR200", 755 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 756 .tda9887_conf = TDA9887_PRESENT, 757 .decoder = EM28XX_SAA711X, 758 .input = { { 759 .type = EM28XX_VMUX_TELEVISION, 760 .vmux = SAA7115_COMPOSITE2, 761 .amux = EM28XX_AMUX_LINE_IN, 762 }, { 763 .type = EM28XX_VMUX_COMPOSITE, 764 .vmux = SAA7115_COMPOSITE0, 765 .amux = EM28XX_AMUX_LINE_IN, 766 }, { 767 .type = EM28XX_VMUX_SVIDEO, 768 .vmux = SAA7115_SVIDEO3, 769 .amux = EM28XX_AMUX_LINE_IN, 770 } }, 771 }, 772 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 773 .name = "Terratec Cinergy 250 USB", 774 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 775 .has_ir_i2c = 1, 776 .tda9887_conf = TDA9887_PRESENT, 777 .decoder = EM28XX_SAA711X, 778 .input = { { 779 .type = EM28XX_VMUX_TELEVISION, 780 .vmux = SAA7115_COMPOSITE2, 781 .amux = EM28XX_AMUX_VIDEO, 782 }, { 783 .type = EM28XX_VMUX_COMPOSITE, 784 .vmux = SAA7115_COMPOSITE0, 785 .amux = EM28XX_AMUX_LINE_IN, 786 }, { 787 .type = EM28XX_VMUX_SVIDEO, 788 .vmux = SAA7115_SVIDEO3, 789 .amux = EM28XX_AMUX_LINE_IN, 790 } }, 791 }, 792 [EM2820_BOARD_PINNACLE_USB_2] = { 793 .name = "Pinnacle PCTV USB 2", 794 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 795 .has_ir_i2c = 1, 796 .tda9887_conf = TDA9887_PRESENT, 797 .decoder = EM28XX_SAA711X, 798 .input = { { 799 .type = EM28XX_VMUX_TELEVISION, 800 .vmux = SAA7115_COMPOSITE2, 801 .amux = EM28XX_AMUX_VIDEO, 802 }, { 803 .type = EM28XX_VMUX_COMPOSITE, 804 .vmux = SAA7115_COMPOSITE0, 805 .amux = EM28XX_AMUX_LINE_IN, 806 }, { 807 .type = EM28XX_VMUX_SVIDEO, 808 .vmux = SAA7115_SVIDEO3, 809 .amux = EM28XX_AMUX_LINE_IN, 810 } }, 811 }, 812 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 813 .name = "Hauppauge WinTV USB 2", 814 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 815 .tda9887_conf = TDA9887_PRESENT | 816 TDA9887_PORT1_ACTIVE | 817 TDA9887_PORT2_ACTIVE, 818 .decoder = EM28XX_TVP5150, 819 .has_msp34xx = 1, 820 .has_ir_i2c = 1, 821 .input = { { 822 .type = EM28XX_VMUX_TELEVISION, 823 .vmux = TVP5150_COMPOSITE0, 824 .amux = MSP_INPUT_DEFAULT, 825 }, { 826 .type = EM28XX_VMUX_SVIDEO, 827 .vmux = TVP5150_SVIDEO, 828 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 829 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 830 } }, 831 }, 832 [EM2820_BOARD_DLINK_USB_TV] = { 833 .name = "D-Link DUB-T210 TV Tuner", 834 .valid = EM28XX_BOARD_NOT_VALIDATED, 835 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 836 .tda9887_conf = TDA9887_PRESENT, 837 .decoder = EM28XX_SAA711X, 838 .input = { { 839 .type = EM28XX_VMUX_TELEVISION, 840 .vmux = SAA7115_COMPOSITE2, 841 .amux = EM28XX_AMUX_LINE_IN, 842 }, { 843 .type = EM28XX_VMUX_COMPOSITE, 844 .vmux = SAA7115_COMPOSITE0, 845 .amux = EM28XX_AMUX_LINE_IN, 846 }, { 847 .type = EM28XX_VMUX_SVIDEO, 848 .vmux = SAA7115_SVIDEO3, 849 .amux = EM28XX_AMUX_LINE_IN, 850 } }, 851 }, 852 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 853 .name = "Hercules Smart TV USB 2.0", 854 .valid = EM28XX_BOARD_NOT_VALIDATED, 855 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 856 .tda9887_conf = TDA9887_PRESENT, 857 .decoder = EM28XX_SAA711X, 858 .input = { { 859 .type = EM28XX_VMUX_TELEVISION, 860 .vmux = SAA7115_COMPOSITE2, 861 .amux = EM28XX_AMUX_LINE_IN, 862 }, { 863 .type = EM28XX_VMUX_COMPOSITE, 864 .vmux = SAA7115_COMPOSITE0, 865 .amux = EM28XX_AMUX_LINE_IN, 866 }, { 867 .type = EM28XX_VMUX_SVIDEO, 868 .vmux = SAA7115_SVIDEO3, 869 .amux = EM28XX_AMUX_LINE_IN, 870 } }, 871 }, 872 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 873 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 874 .valid = EM28XX_BOARD_NOT_VALIDATED, 875 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 876 .tda9887_conf = TDA9887_PRESENT, 877 .decoder = EM28XX_SAA711X, 878 .input = { { 879 .type = EM28XX_VMUX_TELEVISION, 880 .vmux = SAA7115_COMPOSITE2, 881 .amux = EM28XX_AMUX_VIDEO, 882 }, { 883 .type = EM28XX_VMUX_COMPOSITE, 884 .vmux = SAA7115_COMPOSITE0, 885 .amux = EM28XX_AMUX_LINE_IN, 886 }, { 887 .type = EM28XX_VMUX_SVIDEO, 888 .vmux = SAA7115_SVIDEO3, 889 .amux = EM28XX_AMUX_LINE_IN, 890 } }, 891 }, 892 [EM2820_BOARD_GADMEI_UTV310] = { 893 .name = "Gadmei UTV310", 894 .valid = EM28XX_BOARD_NOT_VALIDATED, 895 .tuner_type = TUNER_TNF_5335MF, 896 .tda9887_conf = TDA9887_PRESENT, 897 .decoder = EM28XX_SAA711X, 898 .input = { { 899 .type = EM28XX_VMUX_TELEVISION, 900 .vmux = SAA7115_COMPOSITE1, 901 .amux = EM28XX_AMUX_LINE_IN, 902 }, { 903 .type = EM28XX_VMUX_COMPOSITE, 904 .vmux = SAA7115_COMPOSITE0, 905 .amux = EM28XX_AMUX_LINE_IN, 906 }, { 907 .type = EM28XX_VMUX_SVIDEO, 908 .vmux = SAA7115_SVIDEO3, 909 .amux = EM28XX_AMUX_LINE_IN, 910 } }, 911 }, 912 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 913 .name = "Leadtek Winfast USB II Deluxe", 914 .valid = EM28XX_BOARD_NOT_VALIDATED, 915 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 916 .has_ir_i2c = 1, 917 .tvaudio_addr = 0x58, 918 .tda9887_conf = TDA9887_PRESENT | 919 TDA9887_PORT2_ACTIVE | 920 TDA9887_QSS, 921 .decoder = EM28XX_SAA711X, 922 .adecoder = EM28XX_TVAUDIO, 923 .input = { { 924 .type = EM28XX_VMUX_TELEVISION, 925 .vmux = SAA7115_COMPOSITE4, 926 .amux = EM28XX_AMUX_AUX, 927 }, { 928 .type = EM28XX_VMUX_COMPOSITE, 929 .vmux = SAA7115_COMPOSITE5, 930 .amux = EM28XX_AMUX_LINE_IN, 931 }, { 932 .type = EM28XX_VMUX_SVIDEO, 933 .vmux = SAA7115_SVIDEO3, 934 .amux = EM28XX_AMUX_LINE_IN, 935 } }, 936 .radio = { 937 .type = EM28XX_RADIO, 938 .amux = EM28XX_AMUX_AUX, 939 } 940 }, 941 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 942 .name = "Videology 20K14XUSB USB2.0", 943 .valid = EM28XX_BOARD_NOT_VALIDATED, 944 .tuner_type = TUNER_ABSENT, 945 .is_webcam = 1, 946 .input = { { 947 .type = EM28XX_VMUX_COMPOSITE, 948 .vmux = 0, 949 .amux = EM28XX_AMUX_VIDEO, 950 } }, 951 }, 952 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 953 .name = "Silvercrest Webcam 1.3mpix", 954 .tuner_type = TUNER_ABSENT, 955 .is_webcam = 1, 956 .input = { { 957 .type = EM28XX_VMUX_COMPOSITE, 958 .vmux = 0, 959 .amux = EM28XX_AMUX_VIDEO, 960 .gpio = silvercrest_reg_seq, 961 } }, 962 }, 963 [EM2821_BOARD_SUPERCOMP_USB_2] = { 964 .name = "Supercomp USB 2.0 TV", 965 .valid = EM28XX_BOARD_NOT_VALIDATED, 966 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 967 .tda9887_conf = TDA9887_PRESENT | 968 TDA9887_PORT1_ACTIVE | 969 TDA9887_PORT2_ACTIVE, 970 .decoder = EM28XX_SAA711X, 971 .input = { { 972 .type = EM28XX_VMUX_TELEVISION, 973 .vmux = SAA7115_COMPOSITE2, 974 .amux = EM28XX_AMUX_LINE_IN, 975 }, { 976 .type = EM28XX_VMUX_COMPOSITE, 977 .vmux = SAA7115_COMPOSITE0, 978 .amux = EM28XX_AMUX_VIDEO, 979 }, { 980 .type = EM28XX_VMUX_SVIDEO, 981 .vmux = SAA7115_SVIDEO3, 982 .amux = EM28XX_AMUX_LINE_IN, 983 } }, 984 }, 985 [EM2821_BOARD_USBGEAR_VD204] = { 986 .name = "Usbgear VD204v9", 987 .valid = EM28XX_BOARD_NOT_VALIDATED, 988 .tuner_type = TUNER_ABSENT, /* Capture only device */ 989 .decoder = EM28XX_SAA711X, 990 .input = { { 991 .type = EM28XX_VMUX_COMPOSITE, 992 .vmux = SAA7115_COMPOSITE0, 993 .amux = EM28XX_AMUX_LINE_IN, 994 }, { 995 .type = EM28XX_VMUX_SVIDEO, 996 .vmux = SAA7115_SVIDEO3, 997 .amux = EM28XX_AMUX_LINE_IN, 998 } }, 999 }, 1000 [EM2860_BOARD_NETGMBH_CAM] = { 1001 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 1002 .name = "NetGMBH Cam", 1003 .valid = EM28XX_BOARD_NOT_VALIDATED, 1004 .tuner_type = TUNER_ABSENT, 1005 .is_webcam = 1, 1006 .input = { { 1007 .type = EM28XX_VMUX_COMPOSITE, 1008 .vmux = 0, 1009 .amux = EM28XX_AMUX_VIDEO, 1010 } }, 1011 }, 1012 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 1013 .name = "Typhoon DVD Maker", 1014 .decoder = EM28XX_SAA711X, 1015 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1016 .input = { { 1017 .type = EM28XX_VMUX_COMPOSITE, 1018 .vmux = SAA7115_COMPOSITE0, 1019 .amux = EM28XX_AMUX_LINE_IN, 1020 }, { 1021 .type = EM28XX_VMUX_SVIDEO, 1022 .vmux = SAA7115_SVIDEO3, 1023 .amux = EM28XX_AMUX_LINE_IN, 1024 } }, 1025 }, 1026 [EM2860_BOARD_GADMEI_UTV330] = { 1027 .name = "Gadmei UTV330", 1028 .valid = EM28XX_BOARD_NOT_VALIDATED, 1029 .tuner_type = TUNER_TNF_5335MF, 1030 .tda9887_conf = TDA9887_PRESENT, 1031 .decoder = EM28XX_SAA711X, 1032 .input = { { 1033 .type = EM28XX_VMUX_TELEVISION, 1034 .vmux = SAA7115_COMPOSITE2, 1035 .amux = EM28XX_AMUX_VIDEO, 1036 }, { 1037 .type = EM28XX_VMUX_COMPOSITE, 1038 .vmux = SAA7115_COMPOSITE0, 1039 .amux = EM28XX_AMUX_LINE_IN, 1040 }, { 1041 .type = EM28XX_VMUX_SVIDEO, 1042 .vmux = SAA7115_SVIDEO3, 1043 .amux = EM28XX_AMUX_LINE_IN, 1044 } }, 1045 }, 1046 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 1047 .name = "Gadmei UTV330+", 1048 .tuner_type = TUNER_TNF_5335MF, 1049 .tda9887_conf = TDA9887_PRESENT, 1050 .ir_codes = RC_MAP_GADMEI_RM008Z, 1051 .decoder = EM28XX_SAA711X, 1052 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1053 .input = { { 1054 .type = EM28XX_VMUX_TELEVISION, 1055 .vmux = SAA7115_COMPOSITE2, 1056 .amux = EM28XX_AMUX_VIDEO, 1057 }, { 1058 .type = EM28XX_VMUX_COMPOSITE, 1059 .vmux = SAA7115_COMPOSITE0, 1060 .amux = EM28XX_AMUX_LINE_IN, 1061 }, { 1062 .type = EM28XX_VMUX_SVIDEO, 1063 .vmux = SAA7115_SVIDEO3, 1064 .amux = EM28XX_AMUX_LINE_IN, 1065 } }, 1066 }, 1067 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 1068 .name = "Terratec Cinergy A Hybrid XS", 1069 .valid = EM28XX_BOARD_NOT_VALIDATED, 1070 .tuner_type = TUNER_XC2028, 1071 .tuner_gpio = default_tuner_gpio, 1072 .decoder = EM28XX_TVP5150, 1073 1074 .input = { { 1075 .type = EM28XX_VMUX_TELEVISION, 1076 .vmux = TVP5150_COMPOSITE0, 1077 .amux = EM28XX_AMUX_VIDEO, 1078 .gpio = hauppauge_wintv_hvr_900_analog, 1079 }, { 1080 .type = EM28XX_VMUX_COMPOSITE, 1081 .vmux = TVP5150_COMPOSITE1, 1082 .amux = EM28XX_AMUX_LINE_IN, 1083 .gpio = hauppauge_wintv_hvr_900_analog, 1084 }, { 1085 .type = EM28XX_VMUX_SVIDEO, 1086 .vmux = TVP5150_SVIDEO, 1087 .amux = EM28XX_AMUX_LINE_IN, 1088 .gpio = hauppauge_wintv_hvr_900_analog, 1089 } }, 1090 }, 1091 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 1092 .name = "KWorld PVRTV 300U", 1093 .valid = EM28XX_BOARD_NOT_VALIDATED, 1094 .tuner_type = TUNER_XC2028, 1095 .tuner_gpio = default_tuner_gpio, 1096 .decoder = EM28XX_TVP5150, 1097 .input = { { 1098 .type = EM28XX_VMUX_TELEVISION, 1099 .vmux = TVP5150_COMPOSITE0, 1100 .amux = EM28XX_AMUX_VIDEO, 1101 }, { 1102 .type = EM28XX_VMUX_COMPOSITE, 1103 .vmux = TVP5150_COMPOSITE1, 1104 .amux = EM28XX_AMUX_LINE_IN, 1105 }, { 1106 .type = EM28XX_VMUX_SVIDEO, 1107 .vmux = TVP5150_SVIDEO, 1108 .amux = EM28XX_AMUX_LINE_IN, 1109 } }, 1110 }, 1111 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 1112 .name = "Yakumo MovieMixer", 1113 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1114 .decoder = EM28XX_TVP5150, 1115 .input = { { 1116 .type = EM28XX_VMUX_TELEVISION, 1117 .vmux = TVP5150_COMPOSITE0, 1118 .amux = EM28XX_AMUX_VIDEO, 1119 }, { 1120 .type = EM28XX_VMUX_COMPOSITE, 1121 .vmux = TVP5150_COMPOSITE1, 1122 .amux = EM28XX_AMUX_LINE_IN, 1123 }, { 1124 .type = EM28XX_VMUX_SVIDEO, 1125 .vmux = TVP5150_SVIDEO, 1126 .amux = EM28XX_AMUX_LINE_IN, 1127 } }, 1128 }, 1129 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1130 .name = "EM2860/TVP5150 Reference Design", 1131 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1132 .decoder = EM28XX_TVP5150, 1133 .input = { { 1134 .type = EM28XX_VMUX_COMPOSITE, 1135 .vmux = TVP5150_COMPOSITE1, 1136 .amux = EM28XX_AMUX_LINE_IN, 1137 }, { 1138 .type = EM28XX_VMUX_SVIDEO, 1139 .vmux = TVP5150_SVIDEO, 1140 .amux = EM28XX_AMUX_LINE_IN, 1141 } }, 1142 }, 1143 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1144 .name = "Plextor ConvertX PX-TV100U", 1145 .tuner_type = TUNER_TNF_5335MF, 1146 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1147 EM28XX_XCLK_FREQUENCY_12MHZ, 1148 .tda9887_conf = TDA9887_PRESENT, 1149 .decoder = EM28XX_TVP5150, 1150 .has_msp34xx = 1, 1151 .input = { { 1152 .type = EM28XX_VMUX_TELEVISION, 1153 .vmux = TVP5150_COMPOSITE0, 1154 .amux = EM28XX_AMUX_LINE_IN, 1155 .gpio = pinnacle_hybrid_pro_analog, 1156 }, { 1157 .type = EM28XX_VMUX_COMPOSITE, 1158 .vmux = TVP5150_COMPOSITE1, 1159 .amux = EM28XX_AMUX_LINE_IN, 1160 .gpio = pinnacle_hybrid_pro_analog, 1161 }, { 1162 .type = EM28XX_VMUX_SVIDEO, 1163 .vmux = TVP5150_SVIDEO, 1164 .amux = EM28XX_AMUX_LINE_IN, 1165 .gpio = pinnacle_hybrid_pro_analog, 1166 } }, 1167 }, 1168 1169 /* Those boards with em2870 are DVB Only*/ 1170 1171 [EM2870_BOARD_TERRATEC_XS] = { 1172 .name = "Terratec Cinergy T XS", 1173 .valid = EM28XX_BOARD_NOT_VALIDATED, 1174 .tuner_type = TUNER_XC2028, 1175 .tuner_gpio = default_tuner_gpio, 1176 }, 1177 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1178 .name = "Terratec Cinergy T XS (MT2060)", 1179 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1180 EM28XX_XCLK_FREQUENCY_12MHZ, 1181 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1182 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1183 .has_dvb = 1, 1184 .tuner_gpio = default_tuner_gpio, 1185 }, 1186 [EM2870_BOARD_KWORLD_350U] = { 1187 .name = "Kworld 350 U DVB-T", 1188 .valid = EM28XX_BOARD_NOT_VALIDATED, 1189 .tuner_type = TUNER_XC2028, 1190 .tuner_gpio = default_tuner_gpio, 1191 }, 1192 [EM2870_BOARD_KWORLD_355U] = { 1193 .name = "Kworld 355 U DVB-T", 1194 .valid = EM28XX_BOARD_NOT_VALIDATED, 1195 .tuner_type = TUNER_ABSENT, 1196 .tuner_gpio = default_tuner_gpio, 1197 .has_dvb = 1, 1198 .dvb_gpio = default_digital, 1199 }, 1200 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1201 .name = "Pinnacle PCTV DVB-T", 1202 .valid = EM28XX_BOARD_NOT_VALIDATED, 1203 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1204 /* djh - I have serious doubts this is right... */ 1205 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1206 EM28XX_XCLK_FREQUENCY_10MHZ, 1207 }, 1208 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1209 .name = "Compro, VideoMate U3", 1210 .valid = EM28XX_BOARD_NOT_VALIDATED, 1211 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1212 }, 1213 1214 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1215 .name = "Terratec Hybrid XS Secam", 1216 .has_msp34xx = 1, 1217 .tuner_type = TUNER_XC2028, 1218 .tuner_gpio = default_tuner_gpio, 1219 .decoder = EM28XX_TVP5150, 1220 .has_dvb = 1, 1221 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1222 .input = { { 1223 .type = EM28XX_VMUX_TELEVISION, 1224 .vmux = TVP5150_COMPOSITE0, 1225 .amux = EM28XX_AMUX_VIDEO, 1226 .gpio = terratec_cinergy_USB_XS_FR_analog, 1227 }, { 1228 .type = EM28XX_VMUX_COMPOSITE, 1229 .vmux = TVP5150_COMPOSITE1, 1230 .amux = EM28XX_AMUX_LINE_IN, 1231 .gpio = terratec_cinergy_USB_XS_FR_analog, 1232 }, { 1233 .type = EM28XX_VMUX_SVIDEO, 1234 .vmux = TVP5150_SVIDEO, 1235 .amux = EM28XX_AMUX_LINE_IN, 1236 .gpio = terratec_cinergy_USB_XS_FR_analog, 1237 } }, 1238 }, 1239 [EM2884_BOARD_TERRATEC_H5] = { 1240 .name = "Terratec Cinergy H5", 1241 .has_dvb = 1, 1242 #if 0 1243 .tuner_type = TUNER_PHILIPS_TDA8290, 1244 .tuner_addr = 0x41, 1245 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1246 .tuner_gpio = terratec_h5_gpio, 1247 #else 1248 .tuner_type = TUNER_ABSENT, 1249 #endif 1250 .def_i2c_bus = 1, 1251 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1252 EM28XX_I2C_FREQ_400_KHZ, 1253 }, 1254 [EM2884_BOARD_TERRATEC_H6] = { 1255 .name = "Terratec Cinergy H6 rev. 2", 1256 .has_dvb = 1, 1257 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1258 #if 0 1259 .tuner_type = TUNER_PHILIPS_TDA8290, 1260 .tuner_addr = 0x41, 1261 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1262 .tuner_gpio = terratec_h5_gpio, 1263 #else 1264 .tuner_type = TUNER_ABSENT, 1265 #endif 1266 .def_i2c_bus = 1, 1267 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1268 EM28XX_I2C_FREQ_400_KHZ, 1269 }, 1270 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1271 .name = "Hauppauge WinTV HVR 930C", 1272 .has_dvb = 1, 1273 #if 0 /* FIXME: Add analog support */ 1274 .tuner_type = TUNER_XC5000, 1275 .tuner_addr = 0x41, 1276 .dvb_gpio = hauppauge_930c_digital, 1277 .tuner_gpio = hauppauge_930c_gpio, 1278 #else 1279 .tuner_type = TUNER_ABSENT, 1280 #endif 1281 .ir_codes = RC_MAP_HAUPPAUGE, 1282 .def_i2c_bus = 1, 1283 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1284 EM28XX_I2C_FREQ_400_KHZ, 1285 }, 1286 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1287 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1288 .has_dvb = 1, 1289 /* FIXME: Add analog support - need a saa7136 driver */ 1290 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1291 .ir_codes = RC_MAP_EMPTY, 1292 .def_i2c_bus = 1, 1293 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1294 .dvb_gpio = c3tech_digital_duo_digital, 1295 }, 1296 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1297 .name = "Terratec Cinergy HTC Stick", 1298 .has_dvb = 1, 1299 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1300 .tuner_type = TUNER_ABSENT, 1301 .def_i2c_bus = 1, 1302 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1303 EM28XX_I2C_FREQ_400_KHZ, 1304 }, 1305 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1306 .name = "Elgato EyeTV Hybrid 2008 INT", 1307 .has_dvb = 1, 1308 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1309 .tuner_type = TUNER_ABSENT, 1310 .def_i2c_bus = 1, 1311 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1312 EM28XX_I2C_FREQ_400_KHZ, 1313 }, 1314 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1315 .name = "Hauppauge WinTV HVR 900", 1316 .tda9887_conf = TDA9887_PRESENT, 1317 .tuner_type = TUNER_XC2028, 1318 .tuner_gpio = default_tuner_gpio, 1319 .mts_firmware = 1, 1320 .has_dvb = 1, 1321 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1322 .ir_codes = RC_MAP_HAUPPAUGE, 1323 .decoder = EM28XX_TVP5150, 1324 .input = { { 1325 .type = EM28XX_VMUX_TELEVISION, 1326 .vmux = TVP5150_COMPOSITE0, 1327 .amux = EM28XX_AMUX_VIDEO, 1328 .gpio = hauppauge_wintv_hvr_900_analog, 1329 }, { 1330 .type = EM28XX_VMUX_COMPOSITE, 1331 .vmux = TVP5150_COMPOSITE1, 1332 .amux = EM28XX_AMUX_LINE_IN, 1333 .gpio = hauppauge_wintv_hvr_900_analog, 1334 }, { 1335 .type = EM28XX_VMUX_SVIDEO, 1336 .vmux = TVP5150_SVIDEO, 1337 .amux = EM28XX_AMUX_LINE_IN, 1338 .gpio = hauppauge_wintv_hvr_900_analog, 1339 } }, 1340 }, 1341 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1342 .name = "Hauppauge WinTV HVR 900 (R2)", 1343 .tda9887_conf = TDA9887_PRESENT, 1344 .tuner_type = TUNER_XC2028, 1345 .tuner_gpio = default_tuner_gpio, 1346 .mts_firmware = 1, 1347 .has_dvb = 1, 1348 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1349 .ir_codes = RC_MAP_HAUPPAUGE, 1350 .decoder = EM28XX_TVP5150, 1351 .input = { { 1352 .type = EM28XX_VMUX_TELEVISION, 1353 .vmux = TVP5150_COMPOSITE0, 1354 .amux = EM28XX_AMUX_VIDEO, 1355 .gpio = hauppauge_wintv_hvr_900_analog, 1356 }, { 1357 .type = EM28XX_VMUX_COMPOSITE, 1358 .vmux = TVP5150_COMPOSITE1, 1359 .amux = EM28XX_AMUX_LINE_IN, 1360 .gpio = hauppauge_wintv_hvr_900_analog, 1361 }, { 1362 .type = EM28XX_VMUX_SVIDEO, 1363 .vmux = TVP5150_SVIDEO, 1364 .amux = EM28XX_AMUX_LINE_IN, 1365 .gpio = hauppauge_wintv_hvr_900_analog, 1366 } }, 1367 }, 1368 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1369 .name = "Hauppauge WinTV HVR 850", 1370 .tuner_type = TUNER_XC2028, 1371 .tuner_gpio = default_tuner_gpio, 1372 .mts_firmware = 1, 1373 .has_dvb = 1, 1374 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1375 .ir_codes = RC_MAP_HAUPPAUGE, 1376 .decoder = EM28XX_TVP5150, 1377 .input = { { 1378 .type = EM28XX_VMUX_TELEVISION, 1379 .vmux = TVP5150_COMPOSITE0, 1380 .amux = EM28XX_AMUX_VIDEO, 1381 .gpio = hauppauge_wintv_hvr_900_analog, 1382 }, { 1383 .type = EM28XX_VMUX_COMPOSITE, 1384 .vmux = TVP5150_COMPOSITE1, 1385 .amux = EM28XX_AMUX_LINE_IN, 1386 .gpio = hauppauge_wintv_hvr_900_analog, 1387 }, { 1388 .type = EM28XX_VMUX_SVIDEO, 1389 .vmux = TVP5150_SVIDEO, 1390 .amux = EM28XX_AMUX_LINE_IN, 1391 .gpio = hauppauge_wintv_hvr_900_analog, 1392 } }, 1393 }, 1394 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1395 .name = "Hauppauge WinTV HVR 950", 1396 .tuner_type = TUNER_XC2028, 1397 .tuner_gpio = default_tuner_gpio, 1398 .mts_firmware = 1, 1399 .has_dvb = 1, 1400 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1401 .ir_codes = RC_MAP_HAUPPAUGE, 1402 .decoder = EM28XX_TVP5150, 1403 .input = { { 1404 .type = EM28XX_VMUX_TELEVISION, 1405 .vmux = TVP5150_COMPOSITE0, 1406 .amux = EM28XX_AMUX_VIDEO, 1407 .gpio = hauppauge_wintv_hvr_900_analog, 1408 }, { 1409 .type = EM28XX_VMUX_COMPOSITE, 1410 .vmux = TVP5150_COMPOSITE1, 1411 .amux = EM28XX_AMUX_LINE_IN, 1412 .gpio = hauppauge_wintv_hvr_900_analog, 1413 }, { 1414 .type = EM28XX_VMUX_SVIDEO, 1415 .vmux = TVP5150_SVIDEO, 1416 .amux = EM28XX_AMUX_LINE_IN, 1417 .gpio = hauppauge_wintv_hvr_900_analog, 1418 } }, 1419 }, 1420 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1421 .name = "Pinnacle PCTV HD Pro Stick", 1422 .tuner_type = TUNER_XC2028, 1423 .tuner_gpio = default_tuner_gpio, 1424 .mts_firmware = 1, 1425 .has_dvb = 1, 1426 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1427 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1428 .decoder = EM28XX_TVP5150, 1429 .input = { { 1430 .type = EM28XX_VMUX_TELEVISION, 1431 .vmux = TVP5150_COMPOSITE0, 1432 .amux = EM28XX_AMUX_VIDEO, 1433 .gpio = hauppauge_wintv_hvr_900_analog, 1434 }, { 1435 .type = EM28XX_VMUX_COMPOSITE, 1436 .vmux = TVP5150_COMPOSITE1, 1437 .amux = EM28XX_AMUX_LINE_IN, 1438 .gpio = hauppauge_wintv_hvr_900_analog, 1439 }, { 1440 .type = EM28XX_VMUX_SVIDEO, 1441 .vmux = TVP5150_SVIDEO, 1442 .amux = EM28XX_AMUX_LINE_IN, 1443 .gpio = hauppauge_wintv_hvr_900_analog, 1444 } }, 1445 }, 1446 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1447 .name = "AMD ATI TV Wonder HD 600", 1448 .tuner_type = TUNER_XC2028, 1449 .tuner_gpio = default_tuner_gpio, 1450 .mts_firmware = 1, 1451 .has_dvb = 1, 1452 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1453 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1454 .decoder = EM28XX_TVP5150, 1455 .input = { { 1456 .type = EM28XX_VMUX_TELEVISION, 1457 .vmux = TVP5150_COMPOSITE0, 1458 .amux = EM28XX_AMUX_VIDEO, 1459 .gpio = hauppauge_wintv_hvr_900_analog, 1460 }, { 1461 .type = EM28XX_VMUX_COMPOSITE, 1462 .vmux = TVP5150_COMPOSITE1, 1463 .amux = EM28XX_AMUX_LINE_IN, 1464 .gpio = hauppauge_wintv_hvr_900_analog, 1465 }, { 1466 .type = EM28XX_VMUX_SVIDEO, 1467 .vmux = TVP5150_SVIDEO, 1468 .amux = EM28XX_AMUX_LINE_IN, 1469 .gpio = hauppauge_wintv_hvr_900_analog, 1470 } }, 1471 }, 1472 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1473 .name = "Terratec Hybrid XS", 1474 .tuner_type = TUNER_XC2028, 1475 .tuner_gpio = default_tuner_gpio, 1476 .decoder = EM28XX_TVP5150, 1477 .has_dvb = 1, 1478 .dvb_gpio = default_digital, 1479 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1480 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1481 .input = { { 1482 .type = EM28XX_VMUX_TELEVISION, 1483 .vmux = TVP5150_COMPOSITE0, 1484 .amux = EM28XX_AMUX_VIDEO, 1485 .gpio = default_analog, 1486 }, { 1487 .type = EM28XX_VMUX_COMPOSITE, 1488 .vmux = TVP5150_COMPOSITE1, 1489 .amux = EM28XX_AMUX_LINE_IN, 1490 .gpio = default_analog, 1491 }, { 1492 .type = EM28XX_VMUX_SVIDEO, 1493 .vmux = TVP5150_SVIDEO, 1494 .amux = EM28XX_AMUX_LINE_IN, 1495 .gpio = default_analog, 1496 } }, 1497 }, 1498 /* 1499 * maybe there's a reason behind it why Terratec sells the Hybrid XS 1500 * as Prodigy XS with a different PID, let's keep it separated for now 1501 * maybe we'll need it later on 1502 */ 1503 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1504 .name = "Terratec Prodigy XS", 1505 .tuner_type = TUNER_XC2028, 1506 .tuner_gpio = default_tuner_gpio, 1507 .decoder = EM28XX_TVP5150, 1508 .input = { { 1509 .type = EM28XX_VMUX_TELEVISION, 1510 .vmux = TVP5150_COMPOSITE0, 1511 .amux = EM28XX_AMUX_VIDEO, 1512 .gpio = hauppauge_wintv_hvr_900_analog, 1513 }, { 1514 .type = EM28XX_VMUX_COMPOSITE, 1515 .vmux = TVP5150_COMPOSITE1, 1516 .amux = EM28XX_AMUX_LINE_IN, 1517 .gpio = hauppauge_wintv_hvr_900_analog, 1518 }, { 1519 .type = EM28XX_VMUX_SVIDEO, 1520 .vmux = TVP5150_SVIDEO, 1521 .amux = EM28XX_AMUX_LINE_IN, 1522 .gpio = hauppauge_wintv_hvr_900_analog, 1523 } }, 1524 }, 1525 [EM2820_BOARD_MSI_VOX_USB_2] = { 1526 .name = "MSI VOX USB 2.0", 1527 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1528 .tda9887_conf = TDA9887_PRESENT | 1529 TDA9887_PORT1_ACTIVE | 1530 TDA9887_PORT2_ACTIVE, 1531 .max_range_640_480 = 1, 1532 .decoder = EM28XX_SAA711X, 1533 .input = { { 1534 .type = EM28XX_VMUX_TELEVISION, 1535 .vmux = SAA7115_COMPOSITE4, 1536 .amux = EM28XX_AMUX_VIDEO, 1537 }, { 1538 .type = EM28XX_VMUX_COMPOSITE, 1539 .vmux = SAA7115_COMPOSITE0, 1540 .amux = EM28XX_AMUX_LINE_IN, 1541 }, { 1542 .type = EM28XX_VMUX_SVIDEO, 1543 .vmux = SAA7115_SVIDEO3, 1544 .amux = EM28XX_AMUX_LINE_IN, 1545 } }, 1546 }, 1547 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1548 .name = "Terratec Cinergy 200 USB", 1549 .is_em2800 = 1, 1550 .has_ir_i2c = 1, 1551 .tuner_type = TUNER_LG_TALN, 1552 .tda9887_conf = TDA9887_PRESENT, 1553 .decoder = EM28XX_SAA711X, 1554 .input = { { 1555 .type = EM28XX_VMUX_TELEVISION, 1556 .vmux = SAA7115_COMPOSITE2, 1557 .amux = EM28XX_AMUX_VIDEO, 1558 }, { 1559 .type = EM28XX_VMUX_COMPOSITE, 1560 .vmux = SAA7115_COMPOSITE0, 1561 .amux = EM28XX_AMUX_LINE_IN, 1562 }, { 1563 .type = EM28XX_VMUX_SVIDEO, 1564 .vmux = SAA7115_SVIDEO3, 1565 .amux = EM28XX_AMUX_LINE_IN, 1566 } }, 1567 }, 1568 [EM2800_BOARD_GRABBEEX_USB2800] = { 1569 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1570 .is_em2800 = 1, 1571 .decoder = EM28XX_SAA711X, 1572 .tuner_type = TUNER_ABSENT, /* capture only board */ 1573 .input = { { 1574 .type = EM28XX_VMUX_COMPOSITE, 1575 .vmux = SAA7115_COMPOSITE0, 1576 .amux = EM28XX_AMUX_LINE_IN, 1577 }, { 1578 .type = EM28XX_VMUX_SVIDEO, 1579 .vmux = SAA7115_SVIDEO3, 1580 .amux = EM28XX_AMUX_LINE_IN, 1581 } }, 1582 }, 1583 [EM2800_BOARD_VC211A] = { 1584 .name = "Actionmaster/LinXcel/Digitus VC211A", 1585 .is_em2800 = 1, 1586 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1587 .decoder = EM28XX_SAA711X, 1588 .input = { { 1589 .type = EM28XX_VMUX_COMPOSITE, 1590 .vmux = SAA7115_COMPOSITE0, 1591 .amux = EM28XX_AMUX_LINE_IN, 1592 .gpio = vc211a_enable, 1593 }, { 1594 .type = EM28XX_VMUX_SVIDEO, 1595 .vmux = SAA7115_SVIDEO3, 1596 .amux = EM28XX_AMUX_LINE_IN, 1597 .gpio = vc211a_enable, 1598 } }, 1599 }, 1600 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1601 .name = "Leadtek Winfast USB II", 1602 .is_em2800 = 1, 1603 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1604 .tda9887_conf = TDA9887_PRESENT, 1605 .decoder = EM28XX_SAA711X, 1606 .input = { { 1607 .type = EM28XX_VMUX_TELEVISION, 1608 .vmux = SAA7115_COMPOSITE2, 1609 .amux = EM28XX_AMUX_VIDEO, 1610 }, { 1611 .type = EM28XX_VMUX_COMPOSITE, 1612 .vmux = SAA7115_COMPOSITE0, 1613 .amux = EM28XX_AMUX_LINE_IN, 1614 }, { 1615 .type = EM28XX_VMUX_SVIDEO, 1616 .vmux = SAA7115_SVIDEO3, 1617 .amux = EM28XX_AMUX_LINE_IN, 1618 } }, 1619 }, 1620 [EM2800_BOARD_KWORLD_USB2800] = { 1621 .name = "Kworld USB2800", 1622 .is_em2800 = 1, 1623 .tuner_type = TUNER_PHILIPS_FCV1236D, 1624 .tda9887_conf = TDA9887_PRESENT, 1625 .decoder = EM28XX_SAA711X, 1626 .input = { { 1627 .type = EM28XX_VMUX_TELEVISION, 1628 .vmux = SAA7115_COMPOSITE2, 1629 .amux = EM28XX_AMUX_VIDEO, 1630 }, { 1631 .type = EM28XX_VMUX_COMPOSITE, 1632 .vmux = SAA7115_COMPOSITE0, 1633 .amux = EM28XX_AMUX_LINE_IN, 1634 }, { 1635 .type = EM28XX_VMUX_SVIDEO, 1636 .vmux = SAA7115_SVIDEO3, 1637 .amux = EM28XX_AMUX_LINE_IN, 1638 } }, 1639 }, 1640 [EM2820_BOARD_PINNACLE_DVC_90] = { 1641 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1642 .tuner_type = TUNER_ABSENT, /* capture only board */ 1643 .decoder = EM28XX_SAA711X, 1644 .input = { { 1645 .type = EM28XX_VMUX_COMPOSITE, 1646 .vmux = SAA7115_COMPOSITE0, 1647 .amux = EM28XX_AMUX_LINE_IN, 1648 }, { 1649 .type = EM28XX_VMUX_SVIDEO, 1650 .vmux = SAA7115_SVIDEO3, 1651 .amux = EM28XX_AMUX_LINE_IN, 1652 } }, 1653 }, 1654 [EM2800_BOARD_VGEAR_POCKETTV] = { 1655 .name = "V-Gear PocketTV", 1656 .is_em2800 = 1, 1657 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1658 .tda9887_conf = TDA9887_PRESENT, 1659 .decoder = EM28XX_SAA711X, 1660 .input = { { 1661 .type = EM28XX_VMUX_TELEVISION, 1662 .vmux = SAA7115_COMPOSITE2, 1663 .amux = EM28XX_AMUX_VIDEO, 1664 }, { 1665 .type = EM28XX_VMUX_COMPOSITE, 1666 .vmux = SAA7115_COMPOSITE0, 1667 .amux = EM28XX_AMUX_LINE_IN, 1668 }, { 1669 .type = EM28XX_VMUX_SVIDEO, 1670 .vmux = SAA7115_SVIDEO3, 1671 .amux = EM28XX_AMUX_LINE_IN, 1672 } }, 1673 }, 1674 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1675 .name = "Pixelview PlayTV Box 4 USB 2.0", 1676 .tda9887_conf = TDA9887_PRESENT, 1677 .tuner_type = TUNER_YMEC_TVF_5533MF, 1678 .decoder = EM28XX_SAA711X, 1679 .input = { { 1680 .type = EM28XX_VMUX_TELEVISION, 1681 .vmux = SAA7115_COMPOSITE2, 1682 .amux = EM28XX_AMUX_VIDEO, 1683 .aout = EM28XX_AOUT_MONO | /* I2S */ 1684 EM28XX_AOUT_MASTER, /* Line out pin */ 1685 }, { 1686 .type = EM28XX_VMUX_COMPOSITE, 1687 .vmux = SAA7115_COMPOSITE0, 1688 .amux = EM28XX_AMUX_LINE_IN, 1689 }, { 1690 .type = EM28XX_VMUX_SVIDEO, 1691 .vmux = SAA7115_SVIDEO3, 1692 .amux = EM28XX_AMUX_LINE_IN, 1693 } }, 1694 }, 1695 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1696 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1697 .buttons = std_snapshot_button, 1698 .tda9887_conf = TDA9887_PRESENT, 1699 .tuner_type = TUNER_YMEC_TVF_5533MF, 1700 .tuner_addr = 0x60, 1701 .decoder = EM28XX_SAA711X, 1702 .input = { { 1703 .type = EM28XX_VMUX_TELEVISION, 1704 .vmux = SAA7115_COMPOSITE2, 1705 .amux = EM28XX_AMUX_VIDEO, 1706 .aout = EM28XX_AOUT_MONO | /* I2S */ 1707 EM28XX_AOUT_MASTER, /* Line out pin */ 1708 }, { 1709 .type = EM28XX_VMUX_COMPOSITE, 1710 .vmux = SAA7115_COMPOSITE0, 1711 .amux = EM28XX_AMUX_LINE_IN, 1712 }, { 1713 .type = EM28XX_VMUX_SVIDEO, 1714 .vmux = SAA7115_SVIDEO3, 1715 .amux = EM28XX_AMUX_LINE_IN, 1716 } }, 1717 }, 1718 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1719 .name = "EM2860/SAA711X Reference Design", 1720 .buttons = std_snapshot_button, 1721 .tuner_type = TUNER_ABSENT, 1722 .decoder = EM28XX_SAA711X, 1723 .input = { { 1724 .type = EM28XX_VMUX_SVIDEO, 1725 .vmux = SAA7115_SVIDEO3, 1726 }, { 1727 .type = EM28XX_VMUX_COMPOSITE, 1728 .vmux = SAA7115_COMPOSITE0, 1729 } }, 1730 }, 1731 1732 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1733 .def_i2c_bus = 1, 1734 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1735 EM28XX_I2C_FREQ_100_KHZ, 1736 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1737 .name = "EM2874 Leadership ISDBT", 1738 .tuner_type = TUNER_ABSENT, 1739 .tuner_gpio = leadership_reset, 1740 .dvb_gpio = leadership_digital, 1741 .has_dvb = 1, 1742 }, 1743 1744 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1745 .name = "MSI DigiVox A/D", 1746 .valid = EM28XX_BOARD_NOT_VALIDATED, 1747 .tuner_type = TUNER_XC2028, 1748 .tuner_gpio = default_tuner_gpio, 1749 .decoder = EM28XX_TVP5150, 1750 .input = { { 1751 .type = EM28XX_VMUX_TELEVISION, 1752 .vmux = TVP5150_COMPOSITE0, 1753 .amux = EM28XX_AMUX_VIDEO, 1754 .gpio = em2880_msi_digivox_ad_analog, 1755 }, { 1756 .type = EM28XX_VMUX_COMPOSITE, 1757 .vmux = TVP5150_COMPOSITE1, 1758 .amux = EM28XX_AMUX_LINE_IN, 1759 .gpio = em2880_msi_digivox_ad_analog, 1760 }, { 1761 .type = EM28XX_VMUX_SVIDEO, 1762 .vmux = TVP5150_SVIDEO, 1763 .amux = EM28XX_AMUX_LINE_IN, 1764 .gpio = em2880_msi_digivox_ad_analog, 1765 } }, 1766 }, 1767 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1768 .name = "MSI DigiVox A/D II", 1769 .valid = EM28XX_BOARD_NOT_VALIDATED, 1770 .tuner_type = TUNER_XC2028, 1771 .tuner_gpio = default_tuner_gpio, 1772 .decoder = EM28XX_TVP5150, 1773 .input = { { 1774 .type = EM28XX_VMUX_TELEVISION, 1775 .vmux = TVP5150_COMPOSITE0, 1776 .amux = EM28XX_AMUX_VIDEO, 1777 .gpio = em2880_msi_digivox_ad_analog, 1778 }, { 1779 .type = EM28XX_VMUX_COMPOSITE, 1780 .vmux = TVP5150_COMPOSITE1, 1781 .amux = EM28XX_AMUX_LINE_IN, 1782 .gpio = em2880_msi_digivox_ad_analog, 1783 }, { 1784 .type = EM28XX_VMUX_SVIDEO, 1785 .vmux = TVP5150_SVIDEO, 1786 .amux = EM28XX_AMUX_LINE_IN, 1787 .gpio = em2880_msi_digivox_ad_analog, 1788 } }, 1789 }, 1790 [EM2880_BOARD_KWORLD_DVB_305U] = { 1791 .name = "KWorld DVB-T 305U", 1792 .tuner_type = TUNER_XC2028, 1793 .tuner_gpio = default_tuner_gpio, 1794 .decoder = EM28XX_TVP5150, 1795 .input = { { 1796 .type = EM28XX_VMUX_TELEVISION, 1797 .vmux = TVP5150_COMPOSITE0, 1798 .amux = EM28XX_AMUX_VIDEO, 1799 }, { 1800 .type = EM28XX_VMUX_COMPOSITE, 1801 .vmux = TVP5150_COMPOSITE1, 1802 .amux = EM28XX_AMUX_LINE_IN, 1803 }, { 1804 .type = EM28XX_VMUX_SVIDEO, 1805 .vmux = TVP5150_SVIDEO, 1806 .amux = EM28XX_AMUX_LINE_IN, 1807 } }, 1808 }, 1809 [EM2880_BOARD_KWORLD_DVB_310U] = { 1810 .name = "KWorld DVB-T 310U", 1811 .tuner_type = TUNER_XC2028, 1812 .tuner_gpio = default_tuner_gpio, 1813 .has_dvb = 1, 1814 .dvb_gpio = default_digital, 1815 .mts_firmware = 1, 1816 .decoder = EM28XX_TVP5150, 1817 .input = { { 1818 .type = EM28XX_VMUX_TELEVISION, 1819 .vmux = TVP5150_COMPOSITE0, 1820 .amux = EM28XX_AMUX_VIDEO, 1821 .gpio = default_analog, 1822 }, { 1823 .type = EM28XX_VMUX_COMPOSITE, 1824 .vmux = TVP5150_COMPOSITE1, 1825 .amux = EM28XX_AMUX_LINE_IN, 1826 .gpio = default_analog, 1827 }, { /* S-video has not been tested yet */ 1828 .type = EM28XX_VMUX_SVIDEO, 1829 .vmux = TVP5150_SVIDEO, 1830 .amux = EM28XX_AMUX_LINE_IN, 1831 .gpio = default_analog, 1832 } }, 1833 }, 1834 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1835 .name = "KWorld ATSC 315U HDTV TV Box", 1836 .valid = EM28XX_BOARD_NOT_VALIDATED, 1837 .tuner_type = TUNER_THOMSON_DTT761X, 1838 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1839 .tda9887_conf = TDA9887_PRESENT, 1840 .decoder = EM28XX_SAA711X, 1841 .has_dvb = 1, 1842 .dvb_gpio = em2882_kworld_315u_digital, 1843 .ir_codes = RC_MAP_KWORLD_315U, 1844 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1845 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1846 #if 0 1847 /* FIXME: Analog mode - still not ready */ 1848 .input = { { 1849 .type = EM28XX_VMUX_TELEVISION, 1850 .vmux = SAA7115_COMPOSITE2, 1851 .amux = EM28XX_AMUX_VIDEO, 1852 .gpio = em2882_kworld_315u_analog, 1853 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1854 }, { 1855 .type = EM28XX_VMUX_COMPOSITE, 1856 .vmux = SAA7115_COMPOSITE0, 1857 .amux = EM28XX_AMUX_LINE_IN, 1858 .gpio = em2882_kworld_315u_analog1, 1859 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1860 }, { 1861 .type = EM28XX_VMUX_SVIDEO, 1862 .vmux = SAA7115_SVIDEO3, 1863 .amux = EM28XX_AMUX_LINE_IN, 1864 .gpio = em2882_kworld_315u_analog1, 1865 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1866 } }, 1867 #endif 1868 }, 1869 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1870 .name = "Empire dual TV", 1871 .tuner_type = TUNER_XC2028, 1872 .tuner_gpio = default_tuner_gpio, 1873 .has_dvb = 1, 1874 .dvb_gpio = default_digital, 1875 .mts_firmware = 1, 1876 .decoder = EM28XX_TVP5150, 1877 .input = { { 1878 .type = EM28XX_VMUX_TELEVISION, 1879 .vmux = TVP5150_COMPOSITE0, 1880 .amux = EM28XX_AMUX_VIDEO, 1881 .gpio = default_analog, 1882 }, { 1883 .type = EM28XX_VMUX_COMPOSITE, 1884 .vmux = TVP5150_COMPOSITE1, 1885 .amux = EM28XX_AMUX_LINE_IN, 1886 .gpio = default_analog, 1887 }, { 1888 .type = EM28XX_VMUX_SVIDEO, 1889 .vmux = TVP5150_SVIDEO, 1890 .amux = EM28XX_AMUX_LINE_IN, 1891 .gpio = default_analog, 1892 } }, 1893 }, 1894 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1895 .name = "DNT DA2 Hybrid", 1896 .valid = EM28XX_BOARD_NOT_VALIDATED, 1897 .tuner_type = TUNER_XC2028, 1898 .tuner_gpio = default_tuner_gpio, 1899 .decoder = EM28XX_TVP5150, 1900 .input = { { 1901 .type = EM28XX_VMUX_TELEVISION, 1902 .vmux = TVP5150_COMPOSITE0, 1903 .amux = EM28XX_AMUX_VIDEO, 1904 .gpio = default_analog, 1905 }, { 1906 .type = EM28XX_VMUX_COMPOSITE, 1907 .vmux = TVP5150_COMPOSITE1, 1908 .amux = EM28XX_AMUX_LINE_IN, 1909 .gpio = default_analog, 1910 }, { 1911 .type = EM28XX_VMUX_SVIDEO, 1912 .vmux = TVP5150_SVIDEO, 1913 .amux = EM28XX_AMUX_LINE_IN, 1914 .gpio = default_analog, 1915 } }, 1916 }, 1917 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1918 .name = "Pinnacle Hybrid Pro", 1919 .tuner_type = TUNER_XC2028, 1920 .tuner_gpio = default_tuner_gpio, 1921 .decoder = EM28XX_TVP5150, 1922 .has_dvb = 1, 1923 .dvb_gpio = pinnacle_hybrid_pro_digital, 1924 .input = { { 1925 .type = EM28XX_VMUX_TELEVISION, 1926 .vmux = TVP5150_COMPOSITE0, 1927 .amux = EM28XX_AMUX_VIDEO, 1928 .gpio = pinnacle_hybrid_pro_analog, 1929 }, { 1930 .type = EM28XX_VMUX_COMPOSITE, 1931 .vmux = TVP5150_COMPOSITE1, 1932 .amux = EM28XX_AMUX_LINE_IN, 1933 .gpio = pinnacle_hybrid_pro_analog, 1934 }, { 1935 .type = EM28XX_VMUX_SVIDEO, 1936 .vmux = TVP5150_SVIDEO, 1937 .amux = EM28XX_AMUX_LINE_IN, 1938 .gpio = pinnacle_hybrid_pro_analog, 1939 } }, 1940 }, 1941 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1942 .name = "Pinnacle Hybrid Pro (330e)", 1943 .tuner_type = TUNER_XC2028, 1944 .tuner_gpio = default_tuner_gpio, 1945 .mts_firmware = 1, 1946 .has_dvb = 1, 1947 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1948 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1949 .decoder = EM28XX_TVP5150, 1950 .input = { { 1951 .type = EM28XX_VMUX_TELEVISION, 1952 .vmux = TVP5150_COMPOSITE0, 1953 .amux = EM28XX_AMUX_VIDEO, 1954 .gpio = hauppauge_wintv_hvr_900_analog, 1955 }, { 1956 .type = EM28XX_VMUX_COMPOSITE, 1957 .vmux = TVP5150_COMPOSITE1, 1958 .amux = EM28XX_AMUX_LINE_IN, 1959 .gpio = hauppauge_wintv_hvr_900_analog, 1960 }, { 1961 .type = EM28XX_VMUX_SVIDEO, 1962 .vmux = TVP5150_SVIDEO, 1963 .amux = EM28XX_AMUX_LINE_IN, 1964 .gpio = hauppauge_wintv_hvr_900_analog, 1965 } }, 1966 }, 1967 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1968 .name = "Kworld VS-DVB-T 323UR", 1969 .tuner_type = TUNER_XC2028, 1970 .tuner_gpio = default_tuner_gpio, 1971 .decoder = EM28XX_TVP5150, 1972 .mts_firmware = 1, 1973 .has_dvb = 1, 1974 .dvb_gpio = kworld_330u_digital, 1975 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1976 .ir_codes = RC_MAP_KWORLD_315U, 1977 .input = { { 1978 .type = EM28XX_VMUX_TELEVISION, 1979 .vmux = TVP5150_COMPOSITE0, 1980 .amux = EM28XX_AMUX_VIDEO, 1981 }, { 1982 .type = EM28XX_VMUX_COMPOSITE, 1983 .vmux = TVP5150_COMPOSITE1, 1984 .amux = EM28XX_AMUX_LINE_IN, 1985 }, { 1986 .type = EM28XX_VMUX_SVIDEO, 1987 .vmux = TVP5150_SVIDEO, 1988 .amux = EM28XX_AMUX_LINE_IN, 1989 } }, 1990 }, 1991 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1992 .name = "Terratec Cinergy Hybrid T USB XS (em2882)", 1993 .tuner_type = TUNER_XC2028, 1994 .tuner_gpio = default_tuner_gpio, 1995 .mts_firmware = 1, 1996 .decoder = EM28XX_TVP5150, 1997 .has_dvb = 1, 1998 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1999 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 2000 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2001 .input = { { 2002 .type = EM28XX_VMUX_TELEVISION, 2003 .vmux = TVP5150_COMPOSITE0, 2004 .amux = EM28XX_AMUX_VIDEO, 2005 .gpio = hauppauge_wintv_hvr_900_analog, 2006 }, { 2007 .type = EM28XX_VMUX_COMPOSITE, 2008 .vmux = TVP5150_COMPOSITE1, 2009 .amux = EM28XX_AMUX_LINE_IN, 2010 .gpio = hauppauge_wintv_hvr_900_analog, 2011 }, { 2012 .type = EM28XX_VMUX_SVIDEO, 2013 .vmux = TVP5150_SVIDEO, 2014 .amux = EM28XX_AMUX_LINE_IN, 2015 .gpio = hauppauge_wintv_hvr_900_analog, 2016 } }, 2017 }, 2018 [EM2882_BOARD_DIKOM_DK300] = { 2019 .name = "Dikom DK300", 2020 .tuner_type = TUNER_XC2028, 2021 .tuner_gpio = default_tuner_gpio, 2022 .decoder = EM28XX_TVP5150, 2023 .mts_firmware = 1, 2024 .has_dvb = 1, 2025 .dvb_gpio = dikom_dk300_digital, 2026 .input = { { 2027 .type = EM28XX_VMUX_TELEVISION, 2028 .vmux = TVP5150_COMPOSITE0, 2029 .amux = EM28XX_AMUX_VIDEO, 2030 .gpio = default_analog, 2031 } }, 2032 }, 2033 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 2034 .name = "Kworld PlusTV HD Hybrid 330", 2035 .tuner_type = TUNER_XC2028, 2036 .tuner_gpio = default_tuner_gpio, 2037 .decoder = EM28XX_TVP5150, 2038 .mts_firmware = 1, 2039 .has_dvb = 1, 2040 .dvb_gpio = kworld_330u_digital, 2041 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2042 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2043 EM28XX_I2C_EEPROM_ON_BOARD | 2044 EM28XX_I2C_EEPROM_KEY_VALID, 2045 .input = { { 2046 .type = EM28XX_VMUX_TELEVISION, 2047 .vmux = TVP5150_COMPOSITE0, 2048 .amux = EM28XX_AMUX_VIDEO, 2049 .gpio = kworld_330u_analog, 2050 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2051 }, { 2052 .type = EM28XX_VMUX_COMPOSITE, 2053 .vmux = TVP5150_COMPOSITE1, 2054 .amux = EM28XX_AMUX_LINE_IN, 2055 .gpio = kworld_330u_analog, 2056 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2057 }, { 2058 .type = EM28XX_VMUX_SVIDEO, 2059 .vmux = TVP5150_SVIDEO, 2060 .amux = EM28XX_AMUX_LINE_IN, 2061 .gpio = kworld_330u_analog, 2062 } }, 2063 }, 2064 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 2065 .name = "Compro VideoMate ForYou/Stereo", 2066 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 2067 .tvaudio_addr = 0xb0, 2068 .tda9887_conf = TDA9887_PRESENT, 2069 .decoder = EM28XX_TVP5150, 2070 .adecoder = EM28XX_TVAUDIO, 2071 .mute_gpio = compro_mute_gpio, 2072 .input = { { 2073 .type = EM28XX_VMUX_TELEVISION, 2074 .vmux = TVP5150_COMPOSITE0, 2075 .amux = EM28XX_AMUX_VIDEO, 2076 .gpio = compro_unmute_tv_gpio, 2077 }, { 2078 .type = EM28XX_VMUX_SVIDEO, 2079 .vmux = TVP5150_SVIDEO, 2080 .amux = EM28XX_AMUX_LINE_IN, 2081 .gpio = compro_unmute_svid_gpio, 2082 } }, 2083 }, 2084 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 2085 .name = "Kaiomy TVnPC U2", 2086 .vchannels = 3, 2087 .tuner_type = TUNER_XC2028, 2088 .tuner_addr = 0x61, 2089 .mts_firmware = 1, 2090 .decoder = EM28XX_TVP5150, 2091 .tuner_gpio = default_tuner_gpio, 2092 .ir_codes = RC_MAP_KAIOMY, 2093 .input = { { 2094 .type = EM28XX_VMUX_TELEVISION, 2095 .vmux = TVP5150_COMPOSITE0, 2096 .amux = EM28XX_AMUX_VIDEO, 2097 2098 }, { 2099 .type = EM28XX_VMUX_COMPOSITE, 2100 .vmux = TVP5150_COMPOSITE1, 2101 .amux = EM28XX_AMUX_LINE_IN, 2102 }, { 2103 .type = EM28XX_VMUX_SVIDEO, 2104 .vmux = TVP5150_SVIDEO, 2105 .amux = EM28XX_AMUX_LINE_IN, 2106 } }, 2107 .radio = { 2108 .type = EM28XX_RADIO, 2109 .amux = EM28XX_AMUX_LINE_IN, 2110 } 2111 }, 2112 [EM2860_BOARD_EASYCAP] = { 2113 .name = "Easy Cap Capture DC-60", 2114 .vchannels = 2, 2115 .tuner_type = TUNER_ABSENT, 2116 .decoder = EM28XX_SAA711X, 2117 .input = { { 2118 .type = EM28XX_VMUX_COMPOSITE, 2119 .vmux = SAA7115_COMPOSITE0, 2120 .amux = EM28XX_AMUX_LINE_IN, 2121 }, { 2122 .type = EM28XX_VMUX_SVIDEO, 2123 .vmux = SAA7115_SVIDEO3, 2124 .amux = EM28XX_AMUX_LINE_IN, 2125 } }, 2126 }, 2127 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 2128 .name = "IO-DATA GV-MVP/SZ", 2129 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 2130 .tuner_gpio = default_tuner_gpio, 2131 .tda9887_conf = TDA9887_PRESENT, 2132 .decoder = EM28XX_TVP5150, 2133 .input = { { 2134 .type = EM28XX_VMUX_TELEVISION, 2135 .vmux = TVP5150_COMPOSITE0, 2136 .amux = EM28XX_AMUX_VIDEO, 2137 }, { /* Composite has not been tested yet */ 2138 .type = EM28XX_VMUX_COMPOSITE, 2139 .vmux = TVP5150_COMPOSITE1, 2140 .amux = EM28XX_AMUX_VIDEO, 2141 }, { /* S-video has not been tested yet */ 2142 .type = EM28XX_VMUX_SVIDEO, 2143 .vmux = TVP5150_SVIDEO, 2144 .amux = EM28XX_AMUX_VIDEO, 2145 } }, 2146 }, 2147 [EM2860_BOARD_TERRATEC_GRABBY] = { 2148 .name = "Terratec Grabby", 2149 .vchannels = 2, 2150 .tuner_type = TUNER_ABSENT, 2151 .decoder = EM28XX_SAA711X, 2152 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2153 .input = { { 2154 .type = EM28XX_VMUX_COMPOSITE, 2155 .vmux = SAA7115_COMPOSITE0, 2156 .amux = EM28XX_AMUX_LINE_IN, 2157 }, { 2158 .type = EM28XX_VMUX_SVIDEO, 2159 .vmux = SAA7115_SVIDEO3, 2160 .amux = EM28XX_AMUX_LINE_IN, 2161 } }, 2162 .buttons = std_snapshot_button, 2163 .leds = terratec_grabby_leds, 2164 }, 2165 [EM2860_BOARD_TERRATEC_AV350] = { 2166 .name = "Terratec AV350", 2167 .vchannels = 2, 2168 .tuner_type = TUNER_ABSENT, 2169 .decoder = EM28XX_TVP5150, 2170 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2171 .mute_gpio = terratec_av350_mute_gpio, 2172 .input = { { 2173 .type = EM28XX_VMUX_COMPOSITE, 2174 .vmux = TVP5150_COMPOSITE1, 2175 .amux = EM28XX_AMUX_LINE_IN, 2176 .gpio = terratec_av350_unmute_gpio, 2177 2178 }, { 2179 .type = EM28XX_VMUX_SVIDEO, 2180 .vmux = TVP5150_SVIDEO, 2181 .amux = EM28XX_AMUX_LINE_IN, 2182 .gpio = terratec_av350_unmute_gpio, 2183 } }, 2184 }, 2185 2186 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2187 .name = "Elgato Video Capture", 2188 .decoder = EM28XX_SAA711X, 2189 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2190 .input = { { 2191 .type = EM28XX_VMUX_COMPOSITE, 2192 .vmux = SAA7115_COMPOSITE0, 2193 .amux = EM28XX_AMUX_LINE_IN, 2194 }, { 2195 .type = EM28XX_VMUX_SVIDEO, 2196 .vmux = SAA7115_SVIDEO3, 2197 .amux = EM28XX_AMUX_LINE_IN, 2198 } }, 2199 }, 2200 2201 [EM2882_BOARD_EVGA_INDTUBE] = { 2202 .name = "Evga inDtube", 2203 .tuner_type = TUNER_XC2028, 2204 .tuner_gpio = default_tuner_gpio, 2205 .decoder = EM28XX_TVP5150, 2206 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2207 .mts_firmware = 1, 2208 .has_dvb = 1, 2209 .dvb_gpio = evga_indtube_digital, 2210 .ir_codes = RC_MAP_EVGA_INDTUBE, 2211 .input = { { 2212 .type = EM28XX_VMUX_TELEVISION, 2213 .vmux = TVP5150_COMPOSITE0, 2214 .amux = EM28XX_AMUX_VIDEO, 2215 .gpio = evga_indtube_analog, 2216 }, { 2217 .type = EM28XX_VMUX_COMPOSITE, 2218 .vmux = TVP5150_COMPOSITE1, 2219 .amux = EM28XX_AMUX_LINE_IN, 2220 .gpio = evga_indtube_analog, 2221 }, { 2222 .type = EM28XX_VMUX_SVIDEO, 2223 .vmux = TVP5150_SVIDEO, 2224 .amux = EM28XX_AMUX_LINE_IN, 2225 .gpio = evga_indtube_analog, 2226 } }, 2227 }, 2228 /* 2229 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM 2230 * (Philips TDA10023 + Infineon TUA6034) 2231 */ 2232 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2233 .name = "Reddo DVB-C USB TV Box", 2234 .tuner_type = TUNER_ABSENT, 2235 .tuner_gpio = reddo_dvb_c_usb_box, 2236 .has_dvb = 1, 2237 }, 2238 /* 2239 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2240 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2241 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 2242 */ 2243 [EM2870_BOARD_KWORLD_A340] = { 2244 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2245 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2246 .has_dvb = 1, 2247 .dvb_gpio = kworld_a340_digital, 2248 .tuner_gpio = default_tuner_gpio, 2249 }, 2250 /* 2251 * 2013:024f PCTV nanoStick T2 290e. 2252 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 2253 */ 2254 [EM28174_BOARD_PCTV_290E] = { 2255 .name = "PCTV nanoStick T2 290e", 2256 .def_i2c_bus = 1, 2257 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2258 EM28XX_I2C_FREQ_100_KHZ, 2259 .tuner_type = TUNER_ABSENT, 2260 .tuner_gpio = pctv_290e, 2261 .has_dvb = 1, 2262 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2263 }, 2264 /* 2265 * 2013:024f PCTV DVB-S2 Stick 460e 2266 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 2267 */ 2268 [EM28174_BOARD_PCTV_460E] = { 2269 .def_i2c_bus = 1, 2270 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2271 EM28XX_I2C_FREQ_400_KHZ, 2272 .name = "PCTV DVB-S2 Stick (460e)", 2273 .tuner_type = TUNER_ABSENT, 2274 .tuner_gpio = pctv_460e, 2275 .has_dvb = 1, 2276 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2277 }, 2278 /* 2279 * eb1a:5006 Honestech VIDBOX NW03 2280 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2281 */ 2282 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2283 .name = "Honestech Vidbox NW03", 2284 .tuner_type = TUNER_ABSENT, 2285 .decoder = EM28XX_SAA711X, 2286 .input = { { 2287 .type = EM28XX_VMUX_COMPOSITE, 2288 .vmux = SAA7115_COMPOSITE0, 2289 .amux = EM28XX_AMUX_LINE_IN, 2290 }, { 2291 .type = EM28XX_VMUX_SVIDEO, 2292 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */ 2293 .amux = EM28XX_AMUX_LINE_IN, 2294 } }, 2295 }, 2296 /* 2297 * 1b80:e425 MaxMedia UB425-TC 2298 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2299 */ 2300 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2301 .name = "MaxMedia UB425-TC", 2302 .tuner_type = TUNER_ABSENT, 2303 .tuner_gpio = maxmedia_ub425_tc, 2304 .has_dvb = 1, 2305 .ir_codes = RC_MAP_REDDO, 2306 .def_i2c_bus = 1, 2307 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2308 EM28XX_I2C_FREQ_400_KHZ, 2309 }, 2310 /* 2311 * 2304:0242 PCTV QuatroStick (510e) 2312 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2313 */ 2314 [EM2884_BOARD_PCTV_510E] = { 2315 .name = "PCTV QuatroStick (510e)", 2316 .tuner_type = TUNER_ABSENT, 2317 .tuner_gpio = pctv_510e, 2318 .has_dvb = 1, 2319 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2320 .def_i2c_bus = 1, 2321 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2322 EM28XX_I2C_FREQ_400_KHZ, 2323 }, 2324 /* 2325 * 2013:0251 PCTV QuatroStick nano (520e) 2326 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2327 */ 2328 [EM2884_BOARD_PCTV_520E] = { 2329 .name = "PCTV QuatroStick nano (520e)", 2330 .tuner_type = TUNER_ABSENT, 2331 .tuner_gpio = pctv_520e, 2332 .has_dvb = 1, 2333 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2334 .def_i2c_bus = 1, 2335 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2336 EM28XX_I2C_FREQ_400_KHZ, 2337 }, 2338 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2339 .name = "Terratec Cinergy HTC USB XS", 2340 .has_dvb = 1, 2341 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2342 .tuner_type = TUNER_ABSENT, 2343 .def_i2c_bus = 1, 2344 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2345 EM28XX_I2C_FREQ_400_KHZ, 2346 }, 2347 /* 2348 * 1b80:e1cc Delock 61959 2349 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2350 * mostly the same as MaxMedia UB-425-TC but different remote 2351 */ 2352 [EM2874_BOARD_DELOCK_61959] = { 2353 .name = "Delock 61959", 2354 .tuner_type = TUNER_ABSENT, 2355 .tuner_gpio = maxmedia_ub425_tc, 2356 .has_dvb = 1, 2357 .ir_codes = RC_MAP_DELOCK_61959, 2358 .def_i2c_bus = 1, 2359 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2360 EM28XX_I2C_FREQ_400_KHZ, 2361 }, 2362 /* 2363 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2364 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2365 */ 2366 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2367 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2368 .tuner_type = TUNER_ABSENT, 2369 .has_dvb = 1, 2370 .dvb_gpio = kworld_a340_digital, 2371 .tuner_gpio = default_tuner_gpio, 2372 .def_i2c_bus = 1, 2373 }, 2374 /* 2375 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2376 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2377 */ 2378 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2379 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2380 .tuner_type = TUNER_ABSENT, 2381 .has_dvb = 1, 2382 .tuner_gpio = kworld_ub435q_v3_digital, 2383 .def_i2c_bus = 1, 2384 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2385 EM28XX_I2C_FREQ_100_KHZ, 2386 .leds = kworld_ub435q_v3_leds, 2387 }, 2388 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2389 .name = "Pinnacle PCTV HD Mini", 2390 .tuner_type = TUNER_ABSENT, 2391 .has_dvb = 1, 2392 .dvb_gpio = em2874_pctv_80e_digital, 2393 .decoder = EM28XX_NODECODER, 2394 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2395 .leds = pctv_80e_leds, 2396 }, 2397 /* 2398 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2399 * Empia EM2765 + OmniVision OV2640 2400 */ 2401 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2402 .name = "SpeedLink Vicious And Devine Laplace webcam", 2403 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2404 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2405 EM28XX_I2C_FREQ_100_KHZ, 2406 .def_i2c_bus = 1, 2407 .tuner_type = TUNER_ABSENT, 2408 .is_webcam = 1, 2409 .input = { { 2410 .type = EM28XX_VMUX_COMPOSITE, 2411 .amux = EM28XX_AMUX_VIDEO, 2412 .gpio = speedlink_vad_laplace_reg_seq, 2413 } }, 2414 .buttons = speedlink_vad_laplace_buttons, 2415 .leds = speedlink_vad_laplace_leds, 2416 }, 2417 /* 2418 * 2013:0258 PCTV DVB-S2 Stick (461e) 2419 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 2420 */ 2421 [EM28178_BOARD_PCTV_461E] = { 2422 .def_i2c_bus = 1, 2423 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2424 EM28XX_I2C_FREQ_400_KHZ, 2425 .name = "PCTV DVB-S2 Stick (461e)", 2426 .tuner_type = TUNER_ABSENT, 2427 .tuner_gpio = pctv_461e, 2428 .has_dvb = 1, 2429 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2430 }, 2431 /* 2432 * 2013:0259 PCTV DVB-S2 Stick (461e_v2) 2433 * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293 2434 */ 2435 [EM28178_BOARD_PCTV_461E_V2] = { 2436 .def_i2c_bus = 1, 2437 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2438 EM28XX_I2C_FREQ_400_KHZ, 2439 .name = "PCTV DVB-S2 Stick (461e v2)", 2440 .tuner_type = TUNER_ABSENT, 2441 .tuner_gpio = pctv_461e, 2442 .has_dvb = 1, 2443 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2444 }, 2445 /* 2446 * 2013:025f PCTV tripleStick (292e). 2447 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 2448 */ 2449 [EM28178_BOARD_PCTV_292E] = { 2450 .name = "PCTV tripleStick (292e)", 2451 .def_i2c_bus = 1, 2452 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2453 EM28XX_I2C_FREQ_400_KHZ, 2454 .tuner_type = TUNER_ABSENT, 2455 .tuner_gpio = pctv_292e, 2456 .has_dvb = 1, 2457 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2458 }, 2459 [EM2861_BOARD_LEADTEK_VC100] = { 2460 .name = "Leadtek VC100", 2461 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2462 .decoder = EM28XX_TVP5150, 2463 .input = { { 2464 .type = EM28XX_VMUX_COMPOSITE, 2465 .vmux = TVP5150_COMPOSITE1, 2466 .amux = EM28XX_AMUX_LINE_IN, 2467 }, { 2468 .type = EM28XX_VMUX_SVIDEO, 2469 .vmux = TVP5150_SVIDEO, 2470 .amux = EM28XX_AMUX_LINE_IN, 2471 } }, 2472 }, 2473 /* 2474 * eb1a:8179 Terratec Cinergy T2 Stick HD. 2475 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 2476 */ 2477 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2478 .name = "Terratec Cinergy T2 Stick HD", 2479 .def_i2c_bus = 1, 2480 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2481 EM28XX_I2C_FREQ_400_KHZ, 2482 .tuner_type = TUNER_ABSENT, 2483 .tuner_gpio = terratec_t2_stick_hd, 2484 .has_dvb = 1, 2485 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2486 }, 2487 2488 /* 2489 * 3275:0085 PLEX PX-BCUD. 2490 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 2491 */ 2492 [EM28178_BOARD_PLEX_PX_BCUD] = { 2493 .name = "PLEX PX-BCUD", 2494 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, 2495 .def_i2c_bus = 1, 2496 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 2497 .tuner_type = TUNER_ABSENT, 2498 .tuner_gpio = plex_px_bcud, 2499 .has_dvb = 1, 2500 }, 2501 /* 2502 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc. 2503 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk. 2504 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 2505 */ 2506 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { 2507 .name = "Hauppauge WinTV-dualHD DVB", 2508 .def_i2c_bus = 1, 2509 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2510 EM28XX_I2C_FREQ_400_KHZ, 2511 .tuner_type = TUNER_ABSENT, 2512 .tuner_gpio = hauppauge_dualhd_dvb, 2513 .has_dvb = 1, 2514 .has_dual_ts = 1, 2515 .ir_codes = RC_MAP_HAUPPAUGE, 2516 .leds = hauppauge_dualhd_leds, 2517 }, 2518 /* 2519 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc. 2520 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk. 2521 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 2522 */ 2523 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { 2524 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", 2525 .def_i2c_bus = 1, 2526 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2527 EM28XX_I2C_FREQ_400_KHZ, 2528 .tuner_type = TUNER_ABSENT, 2529 .tuner_gpio = hauppauge_dualhd_dvb, 2530 .has_dvb = 1, 2531 .has_dual_ts = 1, 2532 .ir_codes = RC_MAP_HAUPPAUGE, 2533 .leds = hauppauge_dualhd_leds, 2534 }, 2535 /* 2536 * 1b80:e349 Magix USB Videowandler-2 2537 * (same chips as Honestech VIDBOX NW03) 2538 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2539 */ 2540 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = { 2541 .name = "Magix USB Videowandler-2", 2542 .tuner_type = TUNER_ABSENT, 2543 .decoder = EM28XX_SAA711X, 2544 .input = { { 2545 .type = EM28XX_VMUX_COMPOSITE, 2546 .vmux = SAA7115_COMPOSITE0, 2547 .amux = EM28XX_AMUX_LINE_IN, 2548 }, { 2549 .type = EM28XX_VMUX_SVIDEO, 2550 .amux = EM28XX_AMUX_LINE_IN, 2551 } }, 2552 }, 2553 /* 2554 * 1f4d:1abe MyGica iGrabber 2555 * (same as several other EM2860 devices) 2556 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2557 */ 2558 [EM2860_BOARD_MYGICA_IGRABBER] = { 2559 .name = "MyGica iGrabber", 2560 .vchannels = 2, 2561 .tuner_type = TUNER_ABSENT, 2562 .decoder = EM28XX_SAA711X, 2563 .input = { { 2564 .type = EM28XX_VMUX_COMPOSITE, 2565 .vmux = SAA7115_COMPOSITE0, 2566 .amux = EM28XX_AMUX_LINE_IN, 2567 }, { 2568 .type = EM28XX_VMUX_SVIDEO, 2569 .vmux = SAA7115_SVIDEO3, 2570 .amux = EM28XX_AMUX_LINE_IN, 2571 } }, 2572 }, 2573 /* 2040:826d Hauppauge USB QuadHD 2574 * Empia 28274, Max Linear 692 ATSC combo demod/tuner 2575 */ 2576 [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = { 2577 .name = "Hauppauge USB QuadHD ATSC", 2578 .def_i2c_bus = 1, 2579 .has_dual_ts = 1, 2580 .has_dvb = 1, 2581 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2582 .tuner_type = TUNER_ABSENT, 2583 .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq, 2584 .leds = hauppauge_usb_quadhd_leds, 2585 }, 2586 }; 2587 EXPORT_SYMBOL_GPL(em28xx_boards); 2588 2589 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2590 2591 /* table of devices that work with this driver */ 2592 struct usb_device_id em28xx_id_table[] = { 2593 { USB_DEVICE(0xeb1a, 0x2750), 2594 .driver_info = EM2750_BOARD_UNKNOWN }, 2595 { USB_DEVICE(0xeb1a, 0x2751), 2596 .driver_info = EM2750_BOARD_UNKNOWN }, 2597 { USB_DEVICE(0xeb1a, 0x2800), 2598 .driver_info = EM2800_BOARD_UNKNOWN }, 2599 { USB_DEVICE(0xeb1a, 0x2710), 2600 .driver_info = EM2820_BOARD_UNKNOWN }, 2601 { USB_DEVICE(0xeb1a, 0x2820), 2602 .driver_info = EM2820_BOARD_UNKNOWN }, 2603 { USB_DEVICE(0xeb1a, 0x2821), 2604 .driver_info = EM2820_BOARD_UNKNOWN }, 2605 { USB_DEVICE(0xeb1a, 0x2860), 2606 .driver_info = EM2820_BOARD_UNKNOWN }, 2607 { USB_DEVICE(0xeb1a, 0x2861), 2608 .driver_info = EM2820_BOARD_UNKNOWN }, 2609 { USB_DEVICE(0xeb1a, 0x2862), 2610 .driver_info = EM2820_BOARD_UNKNOWN }, 2611 { USB_DEVICE(0xeb1a, 0x2863), 2612 .driver_info = EM2820_BOARD_UNKNOWN }, 2613 { USB_DEVICE(0xeb1a, 0x2870), 2614 .driver_info = EM2820_BOARD_UNKNOWN }, 2615 { USB_DEVICE(0xeb1a, 0x2881), 2616 .driver_info = EM2820_BOARD_UNKNOWN }, 2617 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */ 2618 .driver_info = EM2820_BOARD_UNKNOWN }, 2619 { USB_DEVICE(0xeb1a, 0x2868), 2620 .driver_info = EM2820_BOARD_UNKNOWN }, 2621 { USB_DEVICE(0xeb1a, 0x2875), 2622 .driver_info = EM2820_BOARD_UNKNOWN }, 2623 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2624 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2625 { USB_DEVICE(0xeb1a, 0xe300), 2626 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2627 { USB_DEVICE(0xeb1a, 0xe303), 2628 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2629 { USB_DEVICE(0xeb1a, 0xe305), 2630 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2631 { USB_DEVICE(0xeb1a, 0xe310), 2632 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2633 { USB_DEVICE(0xeb1a, 0xa313), 2634 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2635 { USB_DEVICE(0xeb1a, 0xa316), 2636 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2637 { USB_DEVICE(0xeb1a, 0xe320), 2638 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2639 { USB_DEVICE(0xeb1a, 0xe323), 2640 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2641 { USB_DEVICE(0xeb1a, 0xe350), 2642 .driver_info = EM2870_BOARD_KWORLD_350U }, 2643 { USB_DEVICE(0xeb1a, 0xe355), 2644 .driver_info = EM2870_BOARD_KWORLD_355U }, 2645 { USB_DEVICE(0xeb1a, 0x2801), 2646 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2647 { USB_DEVICE(0xeb1a, 0xe357), 2648 .driver_info = EM2870_BOARD_KWORLD_355U }, 2649 { USB_DEVICE(0xeb1a, 0xe359), 2650 .driver_info = EM2870_BOARD_KWORLD_355U }, 2651 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */ 2652 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2653 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */ 2654 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2655 { USB_DEVICE(0x0ccd, 0x0036), 2656 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2657 { USB_DEVICE(0x0ccd, 0x004c), 2658 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2659 { USB_DEVICE(0x0ccd, 0x004f), 2660 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2661 { USB_DEVICE(0x0ccd, 0x005e), 2662 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2663 { USB_DEVICE(0x0ccd, 0x0042), 2664 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2665 { USB_DEVICE(0x0ccd, 0x0043), 2666 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2667 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2668 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2669 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2670 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2671 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2672 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2673 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2674 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2675 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2676 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2677 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */ 2678 .driver_info = EM2884_BOARD_TERRATEC_H6 }, 2679 { USB_DEVICE(0x0ccd, 0x0084), 2680 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2681 { USB_DEVICE(0x0ccd, 0x0096), 2682 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2683 { USB_DEVICE(0x0ccd, 0x10AF), 2684 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2685 { USB_DEVICE(0x0ccd, 0x00b2), 2686 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2687 { USB_DEVICE(0x0fd9, 0x0018), 2688 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2689 { USB_DEVICE(0x0fd9, 0x0033), 2690 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2691 { USB_DEVICE(0x185b, 0x2870), 2692 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2693 { USB_DEVICE(0x185b, 0x2041), 2694 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2695 { USB_DEVICE(0x2040, 0x4200), 2696 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2697 { USB_DEVICE(0x2040, 0x4201), 2698 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2699 { USB_DEVICE(0x2040, 0x6500), 2700 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2701 { USB_DEVICE(0x2040, 0x6502), 2702 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2703 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2704 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2705 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2706 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2707 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2708 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2709 { USB_DEVICE(0x2040, 0x651f), 2710 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2711 { USB_DEVICE(0x2040, 0x0265), 2712 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2713 { USB_DEVICE(0x2040, 0x8265), 2714 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2715 { USB_DEVICE(0x2040, 0x026d), 2716 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2717 { USB_DEVICE(0x2040, 0x826d), 2718 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2719 { USB_DEVICE(0x2040, 0x846d), 2720 .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD }, 2721 { USB_DEVICE(0x0438, 0xb002), 2722 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2723 { USB_DEVICE(0x2001, 0xf112), 2724 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2725 { USB_DEVICE(0x2304, 0x0207), 2726 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2727 { USB_DEVICE(0x2304, 0x0208), 2728 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2729 { USB_DEVICE(0x2304, 0x021a), 2730 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2731 { USB_DEVICE(0x2304, 0x0226), 2732 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2733 { USB_DEVICE(0x2304, 0x0227), 2734 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2735 { USB_DEVICE(0x2304, 0x023f), 2736 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2737 { USB_DEVICE(0x0413, 0x6023), 2738 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2739 { USB_DEVICE(0x093b, 0xa003), 2740 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2741 { USB_DEVICE(0x093b, 0xa005), 2742 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2743 { USB_DEVICE(0x04bb, 0x0515), 2744 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2745 { USB_DEVICE(0xeb1a, 0x50a6), 2746 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2747 { USB_DEVICE(0x1b80, 0xa340), 2748 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2749 { USB_DEVICE(0x1b80, 0xe346), 2750 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2751 { USB_DEVICE(0x1b80, 0xe34c), 2752 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2753 { USB_DEVICE(0x2013, 0x024f), 2754 .driver_info = EM28174_BOARD_PCTV_290E }, 2755 { USB_DEVICE(0x2013, 0x024c), 2756 .driver_info = EM28174_BOARD_PCTV_460E }, 2757 { USB_DEVICE(0x2040, 0x1605), 2758 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2759 { USB_DEVICE(0x1b80, 0xe755), 2760 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2761 { USB_DEVICE(0xeb1a, 0x5006), 2762 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2763 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2764 .driver_info = EM2860_BOARD_EASYCAP }, 2765 { USB_DEVICE(0x1b80, 0xe425), 2766 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2767 { USB_DEVICE(0x1f4d, 0x1abe), 2768 .driver_info = EM2860_BOARD_MYGICA_IGRABBER }, 2769 { USB_DEVICE(0x2304, 0x0242), 2770 .driver_info = EM2884_BOARD_PCTV_510E }, 2771 { USB_DEVICE(0x2013, 0x0251), 2772 .driver_info = EM2884_BOARD_PCTV_520E }, 2773 { USB_DEVICE(0x1b80, 0xe1cc), 2774 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2775 { USB_DEVICE(0x1ae7, 0x9003), 2776 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2777 { USB_DEVICE(0x1ae7, 0x9004), 2778 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2779 { USB_DEVICE(0x2013, 0x0258), 2780 .driver_info = EM28178_BOARD_PCTV_461E }, 2781 { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */ 2782 .driver_info = EM28178_BOARD_PCTV_461E }, 2783 { USB_DEVICE(0x2013, 0x0461), 2784 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2785 { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */ 2786 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2787 { USB_DEVICE(0x2013, 0x0259), 2788 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2789 { USB_DEVICE(0x2013, 0x025f), 2790 .driver_info = EM28178_BOARD_PCTV_292E }, 2791 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */ 2792 .driver_info = EM28178_BOARD_PCTV_292E }, 2793 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */ 2794 .driver_info = EM28178_BOARD_PCTV_292E }, 2795 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */ 2796 .driver_info = EM28178_BOARD_PCTV_292E }, 2797 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */ 2798 .driver_info = EM28178_BOARD_PCTV_292E }, 2799 { USB_DEVICE(0x0413, 0x6f07), 2800 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2801 { USB_DEVICE(0xeb1a, 0x8179), 2802 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2803 { USB_DEVICE(0x3275, 0x0085), 2804 .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, 2805 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ 2806 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, 2807 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */ 2808 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 }, 2809 { }, 2810 }; 2811 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2812 2813 /* 2814 * EEPROM hash table for devices with generic USB IDs 2815 */ 2816 static const struct em28xx_hash_table em28xx_eeprom_hash[] = { 2817 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2818 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2819 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2820 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2821 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2822 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2823 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2824 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2825 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2826 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2827 }; 2828 2829 /* I2C devicelist hash table for devices with generic USB IDs */ 2830 static const struct em28xx_hash_table em28xx_i2c_hash[] = { 2831 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2832 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2833 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2834 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2835 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2836 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2837 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2838 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2839 }; 2840 2841 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2842 2843 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2844 { 2845 struct em28xx_i2c_bus *i2c_bus = ptr; 2846 struct em28xx *dev = i2c_bus->dev; 2847 int rc = 0; 2848 2849 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2850 return 0; 2851 2852 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2853 return 0; 2854 2855 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2856 2857 return rc; 2858 } 2859 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2860 2861 static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) 2862 { 2863 const struct em28xx_board *board = &em28xx_boards[dev->model]; 2864 u8 xclk = board->xclk, i2c_speed = board->i2c_speed; 2865 2866 /* 2867 * Those are the default values for the majority of boards 2868 * Use those values if not specified otherwise at boards entry 2869 */ 2870 if (!xclk) 2871 xclk = EM28XX_XCLK_IR_RC5_MODE | 2872 EM28XX_XCLK_FREQUENCY_12MHZ; 2873 2874 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); 2875 2876 if (!i2c_speed) 2877 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2878 EM28XX_I2C_FREQ_100_KHZ; 2879 2880 dev->i2c_speed = i2c_speed & 0x03; 2881 2882 if (!dev->board.is_em2800) 2883 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed); 2884 msleep(50); 2885 } 2886 2887 static inline void em28xx_set_model(struct em28xx *dev) 2888 { 2889 dev->board = em28xx_boards[dev->model]; 2890 dev->has_msp34xx = dev->board.has_msp34xx; 2891 dev->is_webcam = dev->board.is_webcam; 2892 2893 em28xx_set_xclk_i2c_speed(dev); 2894 2895 /* Should be initialized early, for I2C to work */ 2896 dev->def_i2c_bus = dev->board.def_i2c_bus; 2897 } 2898 2899 /* 2900 * Wait until AC97_RESET reports the expected value reliably before proceeding. 2901 * We also check that two unrelated registers accesses don't return the same 2902 * value to avoid premature return. 2903 * This procedure helps ensuring AC97 register accesses are reliable. 2904 */ 2905 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2906 int expected_feat) 2907 { 2908 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2909 int feat, powerdown; 2910 2911 while (time_is_after_jiffies(timeout)) { 2912 feat = em28xx_read_ac97(dev, AC97_RESET); 2913 if (feat < 0) 2914 return feat; 2915 2916 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2917 if (powerdown < 0) 2918 return powerdown; 2919 2920 if (feat == expected_feat && feat != powerdown) 2921 return 0; 2922 2923 msleep(50); 2924 } 2925 2926 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); 2927 return -ETIMEDOUT; 2928 } 2929 2930 /* 2931 * Since em28xx_pre_card_setup() requires a proper dev->model, 2932 * this won't work for boards with generic PCI IDs 2933 */ 2934 static void em28xx_pre_card_setup(struct em28xx *dev) 2935 { 2936 /* 2937 * Set the initial XCLK and I2C clock values based on the board 2938 * definition 2939 */ 2940 em28xx_set_xclk_i2c_speed(dev); 2941 2942 /* request some modules */ 2943 switch (dev->model) { 2944 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2945 /* Sets the msp34xx I2S speed */ 2946 dev->i2s_speed = 2048000; 2947 break; 2948 case EM2861_BOARD_KWORLD_PVRTV_300U: 2949 case EM2880_BOARD_KWORLD_DVB_305U: 2950 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2951 usleep_range(10000, 11000); 2952 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2953 usleep_range(10000, 11000); 2954 break; 2955 case EM2870_BOARD_COMPRO_VIDEOMATE: 2956 /* 2957 * TODO: someone can do some cleanup here... 2958 * not everything's needed 2959 */ 2960 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2961 usleep_range(10000, 11000); 2962 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2963 usleep_range(10000, 11000); 2964 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2965 msleep(70); 2966 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2967 msleep(70); 2968 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2969 msleep(70); 2970 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2971 msleep(70); 2972 break; 2973 case EM2870_BOARD_TERRATEC_XS_MT2060: 2974 /* 2975 * this device needs some gpio writes to get the DVB-T 2976 * demod work 2977 */ 2978 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2979 msleep(70); 2980 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2981 msleep(70); 2982 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2983 msleep(70); 2984 break; 2985 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2986 /* 2987 * this device needs some gpio writes to get the 2988 * DVB-T demod work 2989 */ 2990 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2991 msleep(70); 2992 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2993 msleep(70); 2994 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2995 msleep(70); 2996 break; 2997 case EM2820_BOARD_GADMEI_UTV310: 2998 case EM2820_BOARD_MSI_VOX_USB_2: 2999 /* enables audio for that devices */ 3000 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3001 break; 3002 3003 case EM2882_BOARD_KWORLD_ATSC_315U: 3004 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3005 usleep_range(10000, 11000); 3006 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3007 usleep_range(10000, 11000); 3008 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 3009 usleep_range(10000, 11000); 3010 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 3011 usleep_range(10000, 11000); 3012 break; 3013 3014 case EM2860_BOARD_KAIOMY_TVNPC_U2: 3015 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 3016 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 3017 em28xx_write_regs(dev, 0x0d, "\x42", 1); 3018 em28xx_write_regs(dev, 0x08, "\xfd", 1); 3019 usleep_range(10000, 11000); 3020 em28xx_write_regs(dev, 0x08, "\xff", 1); 3021 usleep_range(10000, 11000); 3022 em28xx_write_regs(dev, 0x08, "\x7f", 1); 3023 usleep_range(10000, 11000); 3024 em28xx_write_regs(dev, 0x08, "\x6b", 1); 3025 3026 break; 3027 case EM2860_BOARD_EASYCAP: 3028 em28xx_write_regs(dev, 0x08, "\xf8", 1); 3029 break; 3030 3031 case EM2820_BOARD_IODATA_GVMVP_SZ: 3032 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3033 msleep(70); 3034 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 3035 usleep_range(10000, 11000); 3036 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3037 msleep(70); 3038 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3039 msleep(70); 3040 break; 3041 3042 case EM2860_BOARD_TERRATEC_GRABBY: 3043 /* 3044 * HACK?: Ensure AC97 register reading is reliable before 3045 * proceeding. In practice, this will wait about 1.6 seconds. 3046 */ 3047 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 3048 break; 3049 } 3050 3051 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3052 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3053 3054 /* Unlock device */ 3055 em28xx_set_mode(dev, EM28XX_SUSPEND); 3056 } 3057 3058 static int em28xx_hint_board(struct em28xx *dev) 3059 { 3060 int i; 3061 3062 if (dev->is_webcam) { 3063 if (dev->em28xx_sensor == EM28XX_MT9V011) { 3064 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 3065 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 3066 dev->em28xx_sensor == EM28XX_MT9M111) { 3067 dev->model = EM2750_BOARD_UNKNOWN; 3068 } 3069 /* FIXME: IMPROVE ! */ 3070 3071 return 0; 3072 } 3073 3074 /* 3075 * HINT method: EEPROM 3076 * 3077 * This method works only for boards with eeprom. 3078 * Uses a hash of all eeprom bytes. The hash should be 3079 * unique for a vendor/tuner pair. 3080 * There are a high chance that tuners for different 3081 * video standards produce different hashes. 3082 */ 3083 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 3084 if (dev->hash == em28xx_eeprom_hash[i].hash) { 3085 dev->model = em28xx_eeprom_hash[i].model; 3086 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 3087 3088 dev_err(&dev->intf->dev, 3089 "Your board has no unique USB ID.\n" 3090 "A hint were successfully done, based on eeprom hash.\n" 3091 "This method is not 100%% failproof.\n" 3092 "If the board were misdetected, please email this log to:\n" 3093 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3094 "Board detected as %s\n", 3095 em28xx_boards[dev->model].name); 3096 3097 return 0; 3098 } 3099 } 3100 3101 /* 3102 * HINT method: I2C attached devices 3103 * 3104 * This method works for all boards. 3105 * Uses a hash of i2c scanned devices. 3106 * Devices with the same i2c attached chips will 3107 * be considered equal. 3108 * This method is less precise than the eeprom one. 3109 */ 3110 3111 /* user did not request i2c scanning => do it now */ 3112 if (!dev->i2c_hash) 3113 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 3114 3115 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 3116 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 3117 dev->model = em28xx_i2c_hash[i].model; 3118 dev->tuner_type = em28xx_i2c_hash[i].tuner; 3119 dev_err(&dev->intf->dev, 3120 "Your board has no unique USB ID.\n" 3121 "A hint were successfully done, based on i2c devicelist hash.\n" 3122 "This method is not 100%% failproof.\n" 3123 "If the board were misdetected, please email this log to:\n" 3124 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3125 "Board detected as %s\n", 3126 em28xx_boards[dev->model].name); 3127 3128 return 0; 3129 } 3130 } 3131 3132 dev_err(&dev->intf->dev, 3133 "Your board has no unique USB ID and thus need a hint to be detected.\n" 3134 "You may try to use card=<n> insmod option to workaround that.\n" 3135 "Please send an email with this log to:\n" 3136 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3137 "Board eeprom hash is 0x%08lx\n" 3138 "Board i2c devicelist hash is 0x%08lx\n", 3139 dev->hash, dev->i2c_hash); 3140 3141 dev_err(&dev->intf->dev, 3142 "Here is a list of valid choices for the card=<n> insmod option:\n"); 3143 for (i = 0; i < em28xx_bcount; i++) { 3144 dev_err(&dev->intf->dev, 3145 " card=%d -> %s\n", i, em28xx_boards[i].name); 3146 } 3147 return -1; 3148 } 3149 3150 static void em28xx_card_setup(struct em28xx *dev) 3151 { 3152 int i, j, idx; 3153 bool duplicate_entry; 3154 3155 /* 3156 * If the device can be a webcam, seek for a sensor. 3157 * If sensor is not found, then it isn't a webcam. 3158 */ 3159 if (dev->is_webcam) { 3160 em28xx_detect_sensor(dev); 3161 if (dev->em28xx_sensor == EM28XX_NOSENSOR) 3162 /* NOTE: error/unknown sensor/no sensor */ 3163 dev->is_webcam = 0; 3164 } 3165 3166 switch (dev->model) { 3167 case EM2750_BOARD_UNKNOWN: 3168 case EM2820_BOARD_UNKNOWN: 3169 case EM2800_BOARD_UNKNOWN: 3170 /* 3171 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3172 * 3173 * This occurs because they share identical USB vendor and 3174 * product IDs. 3175 * 3176 * What we do here is look up the EEPROM hash of the K-WORLD 3177 * and if it is found then we decide that we do not have 3178 * a DIGIVOX and reset the device to the K-WORLD instead. 3179 * 3180 * This solution is only valid if they do not share eeprom 3181 * hash identities which has not been determined as yet. 3182 */ 3183 if (em28xx_hint_board(dev) < 0) { 3184 dev_err(&dev->intf->dev, "Board not discovered\n"); 3185 } else { 3186 em28xx_set_model(dev); 3187 em28xx_pre_card_setup(dev); 3188 } 3189 break; 3190 default: 3191 em28xx_set_model(dev); 3192 } 3193 3194 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", 3195 dev->board.name, dev->model); 3196 3197 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 3198 3199 /* request some modules */ 3200 switch (dev->model) { 3201 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 3202 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3203 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3204 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3205 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3206 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 3207 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: 3208 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: 3209 { 3210 struct tveeprom tv; 3211 3212 if (!dev->eedata) 3213 break; 3214 #if defined(CONFIG_MODULES) && defined(MODULE) 3215 request_module("tveeprom"); 3216 #endif 3217 /* Call first TVeeprom */ 3218 3219 tveeprom_hauppauge_analog(&tv, dev->eedata); 3220 3221 dev->tuner_type = tv.tuner_type; 3222 3223 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 3224 dev->i2s_speed = 2048000; 3225 dev->has_msp34xx = 1; 3226 } 3227 break; 3228 } 3229 case EM2882_BOARD_KWORLD_ATSC_315U: 3230 em28xx_write_reg(dev, 0x0d, 0x42); 3231 usleep_range(10000, 11000); 3232 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3233 usleep_range(10000, 11000); 3234 break; 3235 case EM2820_BOARD_KWORLD_PVRTV2800RF: 3236 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 3237 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 3238 break; 3239 case EM2820_BOARD_UNKNOWN: 3240 case EM2800_BOARD_UNKNOWN: 3241 /* 3242 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3243 * 3244 * This occurs because they share identical USB vendor and 3245 * product IDs. 3246 * 3247 * What we do here is look up the EEPROM hash of the K-WORLD 3248 * and if it is found then we decide that we do not have 3249 * a DIGIVOX and reset the device to the K-WORLD instead. 3250 * 3251 * This solution is only valid if they do not share eeprom 3252 * hash identities which has not been determined as yet. 3253 */ 3254 case EM2880_BOARD_MSI_DIGIVOX_AD: 3255 if (!em28xx_hint_board(dev)) 3256 em28xx_set_model(dev); 3257 3258 /* 3259 * In cases where we had to use a board hint, the call to 3260 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3261 * so make the call now so the analog GPIOs are set properly 3262 * before probing the i2c bus. 3263 */ 3264 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3265 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3266 break; 3267 3268 /* 3269 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 3270 * 3271 * This occurs because they share identical USB vendor and 3272 * product IDs. 3273 * 3274 * What we do here is look up the EEPROM hash of the Dikom 3275 * and if it is found then we decide that we do not have 3276 * a Kworld and reset the device to the Dikom instead. 3277 * 3278 * This solution is only valid if they do not share eeprom 3279 * hash identities which has not been determined as yet. 3280 */ 3281 case EM2882_BOARD_KWORLD_VS_DVBT: 3282 if (!em28xx_hint_board(dev)) 3283 em28xx_set_model(dev); 3284 3285 /* 3286 * In cases where we had to use a board hint, the call to 3287 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3288 * so make the call now so the analog GPIOs are set properly 3289 * before probing the i2c bus. 3290 */ 3291 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3292 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3293 break; 3294 } 3295 3296 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 3297 dev_err(&dev->intf->dev, 3298 "\n\n" 3299 "The support for this board weren't valid yet.\n" 3300 "Please send a report of having this working\n" 3301 "not to V4L mailing list (and/or to other addresses)\n\n"); 3302 } 3303 3304 /* Free eeprom data memory */ 3305 kfree(dev->eedata); 3306 dev->eedata = NULL; 3307 3308 /* Allow override tuner type by a module parameter */ 3309 if (tuner >= 0) 3310 dev->tuner_type = tuner; 3311 3312 /* 3313 * Dynamically generate a list of valid audio inputs for this 3314 * specific board, mapping them via enum em28xx_amux. 3315 */ 3316 3317 idx = 0; 3318 for (i = 0; i < MAX_EM28XX_INPUT; i++) { 3319 if (!INPUT(i)->type) 3320 continue; 3321 3322 /* Skip already mapped audio inputs */ 3323 duplicate_entry = false; 3324 for (j = 0; j < idx; j++) { 3325 if (INPUT(i)->amux == dev->amux_map[j]) { 3326 duplicate_entry = true; 3327 break; 3328 } 3329 } 3330 if (duplicate_entry) 3331 continue; 3332 3333 dev->amux_map[idx++] = INPUT(i)->amux; 3334 } 3335 for (; idx < MAX_EM28XX_INPUT; idx++) 3336 dev->amux_map[idx] = EM28XX_AMUX_UNUSED; 3337 } 3338 3339 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 3340 { 3341 memset(ctl, 0, sizeof(*ctl)); 3342 3343 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3344 ctl->max_len = 64; 3345 ctl->mts = em28xx_boards[dev->model].mts_firmware; 3346 3347 switch (dev->model) { 3348 case EM2880_BOARD_EMPIRE_DUAL_TV: 3349 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3350 case EM2882_BOARD_TERRATEC_HYBRID_XS: 3351 case EM2880_BOARD_TERRATEC_HYBRID_XS: 3352 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 3353 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 3354 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK: 3355 ctl->demod = XC3028_FE_ZARLINK456; 3356 break; 3357 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3358 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 3359 ctl->demod = XC3028_FE_DEFAULT; 3360 break; 3361 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 3362 ctl->demod = XC3028_FE_DEFAULT; 3363 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3364 break; 3365 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3366 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3367 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 3368 /* FIXME: Better to specify the needed IF */ 3369 ctl->demod = XC3028_FE_DEFAULT; 3370 break; 3371 case EM2883_BOARD_KWORLD_HYBRID_330U: 3372 case EM2882_BOARD_DIKOM_DK300: 3373 case EM2882_BOARD_KWORLD_VS_DVBT: 3374 ctl->demod = XC3028_FE_CHINA; 3375 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3376 break; 3377 case EM2882_BOARD_EVGA_INDTUBE: 3378 ctl->demod = XC3028_FE_CHINA; 3379 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3380 break; 3381 default: 3382 ctl->demod = XC3028_FE_OREN538; 3383 } 3384 } 3385 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3386 3387 static void request_module_async(struct work_struct *work) 3388 { 3389 struct em28xx *dev = container_of(work, 3390 struct em28xx, request_module_wk); 3391 3392 /* 3393 * The em28xx extensions can be modules or builtin. If the 3394 * modules are already loaded or are built in, those extensions 3395 * can be initialised right now. Otherwise, the module init 3396 * code will do it. 3397 */ 3398 3399 /* 3400 * Devices with an audio-only intf also have a V4L/DVB/RC 3401 * intf. Don't register extensions twice on those devices. 3402 */ 3403 if (dev->is_audio_only) { 3404 #if defined(CONFIG_MODULES) && defined(MODULE) 3405 request_module("em28xx-alsa"); 3406 #endif 3407 return; 3408 } 3409 3410 em28xx_init_extension(dev); 3411 3412 #if defined(CONFIG_MODULES) && defined(MODULE) 3413 if (dev->has_video) 3414 request_module("em28xx-v4l"); 3415 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3416 request_module("snd-usb-audio"); 3417 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3418 request_module("em28xx-alsa"); 3419 if (dev->board.has_dvb) 3420 request_module("em28xx-dvb"); 3421 if (dev->board.buttons || 3422 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3423 request_module("em28xx-rc"); 3424 #endif /* CONFIG_MODULES */ 3425 } 3426 3427 static void request_modules(struct em28xx *dev) 3428 { 3429 INIT_WORK(&dev->request_module_wk, request_module_async); 3430 schedule_work(&dev->request_module_wk); 3431 } 3432 3433 static void flush_request_modules(struct em28xx *dev) 3434 { 3435 flush_work(&dev->request_module_wk); 3436 } 3437 3438 static int em28xx_media_device_init(struct em28xx *dev, 3439 struct usb_device *udev) 3440 { 3441 #ifdef CONFIG_MEDIA_CONTROLLER 3442 struct media_device *mdev; 3443 3444 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3445 if (!mdev) 3446 return -ENOMEM; 3447 3448 if (udev->product) 3449 media_device_usb_init(mdev, udev, udev->product); 3450 else if (udev->manufacturer) 3451 media_device_usb_init(mdev, udev, udev->manufacturer); 3452 else 3453 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); 3454 3455 dev->media_dev = mdev; 3456 #endif 3457 return 0; 3458 } 3459 3460 static void em28xx_unregister_media_device(struct em28xx *dev) 3461 { 3462 #ifdef CONFIG_MEDIA_CONTROLLER 3463 if (dev->media_dev) { 3464 media_device_unregister(dev->media_dev); 3465 media_device_cleanup(dev->media_dev); 3466 kfree(dev->media_dev); 3467 dev->media_dev = NULL; 3468 } 3469 #endif 3470 } 3471 3472 /* 3473 * em28xx_release_resources() 3474 * unregisters the v4l2,i2c and usb devices 3475 * called when the device gets disconnected or at module unload 3476 */ 3477 static void em28xx_release_resources(struct em28xx *dev) 3478 { 3479 struct usb_device *udev = interface_to_usbdev(dev->intf); 3480 3481 /*FIXME: I2C IR should be disconnected */ 3482 3483 mutex_lock(&dev->lock); 3484 3485 em28xx_unregister_media_device(dev); 3486 3487 if (dev->def_i2c_bus) 3488 em28xx_i2c_unregister(dev, 1); 3489 em28xx_i2c_unregister(dev, 0); 3490 3491 if (dev->ts == PRIMARY_TS) 3492 usb_put_dev(udev); 3493 3494 /* Mark device as unused */ 3495 clear_bit(dev->devno, em28xx_devused); 3496 3497 mutex_unlock(&dev->lock); 3498 }; 3499 3500 /** 3501 * em28xx_free_device() - Free em28xx device 3502 * 3503 * @ref: struct kref for em28xx device 3504 * 3505 * This is called when all extensions and em28xx core unregisters a device 3506 */ 3507 void em28xx_free_device(struct kref *ref) 3508 { 3509 struct em28xx *dev = kref_to_dev(ref); 3510 3511 dev_info(&dev->intf->dev, "Freeing device\n"); 3512 3513 if (!dev->disconnected) 3514 em28xx_release_resources(dev); 3515 3516 if (dev->ts == PRIMARY_TS) 3517 kfree(dev->alt_max_pkt_size_isoc); 3518 3519 kfree(dev); 3520 } 3521 EXPORT_SYMBOL_GPL(em28xx_free_device); 3522 3523 /* 3524 * em28xx_init_dev() 3525 * allocates and inits the device structs, registers i2c bus and v4l device 3526 */ 3527 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3528 struct usb_interface *intf, 3529 int minor) 3530 { 3531 int retval; 3532 const char *chip_name = NULL; 3533 3534 dev->intf = intf; 3535 mutex_init(&dev->ctrl_urb_lock); 3536 spin_lock_init(&dev->slock); 3537 3538 dev->em28xx_write_regs = em28xx_write_regs; 3539 dev->em28xx_read_reg = em28xx_read_reg; 3540 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3541 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3542 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3543 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3544 3545 em28xx_set_model(dev); 3546 3547 dev->wait_after_write = 5; 3548 3549 /* Based on the Chip ID, set the device configuration */ 3550 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3551 if (retval > 0) { 3552 dev->chip_id = retval; 3553 3554 switch (dev->chip_id) { 3555 case CHIP_ID_EM2800: 3556 chip_name = "em2800"; 3557 break; 3558 case CHIP_ID_EM2710: 3559 chip_name = "em2710"; 3560 break; 3561 case CHIP_ID_EM2750: 3562 chip_name = "em2750"; 3563 break; 3564 case CHIP_ID_EM2765: 3565 chip_name = "em2765"; 3566 dev->wait_after_write = 0; 3567 dev->is_em25xx = 1; 3568 dev->eeprom_addrwidth_16bit = 1; 3569 break; 3570 case CHIP_ID_EM2820: 3571 chip_name = "em2710/2820"; 3572 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { 3573 __le16 idProd = udev->descriptor.idProduct; 3574 3575 if (le16_to_cpu(idProd) == 0x2710) 3576 chip_name = "em2710"; 3577 else if (le16_to_cpu(idProd) == 0x2820) 3578 chip_name = "em2820"; 3579 } 3580 /* NOTE: the em2820 is used in webcams, too ! */ 3581 break; 3582 case CHIP_ID_EM2840: 3583 chip_name = "em2840"; 3584 break; 3585 case CHIP_ID_EM2860: 3586 chip_name = "em2860"; 3587 break; 3588 case CHIP_ID_EM2870: 3589 chip_name = "em2870"; 3590 dev->wait_after_write = 0; 3591 break; 3592 case CHIP_ID_EM2874: 3593 chip_name = "em2874"; 3594 dev->wait_after_write = 0; 3595 dev->eeprom_addrwidth_16bit = 1; 3596 break; 3597 case CHIP_ID_EM28174: 3598 chip_name = "em28174"; 3599 dev->wait_after_write = 0; 3600 dev->eeprom_addrwidth_16bit = 1; 3601 break; 3602 case CHIP_ID_EM28178: 3603 chip_name = "em28178"; 3604 dev->wait_after_write = 0; 3605 dev->eeprom_addrwidth_16bit = 1; 3606 break; 3607 case CHIP_ID_EM2883: 3608 chip_name = "em2882/3"; 3609 dev->wait_after_write = 0; 3610 break; 3611 case CHIP_ID_EM2884: 3612 chip_name = "em2884"; 3613 dev->wait_after_write = 0; 3614 dev->eeprom_addrwidth_16bit = 1; 3615 break; 3616 } 3617 } 3618 if (!chip_name) 3619 dev_info(&dev->intf->dev, 3620 "unknown em28xx chip ID (%d)\n", dev->chip_id); 3621 else 3622 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); 3623 3624 em28xx_media_device_init(dev, udev); 3625 3626 if (dev->is_audio_only) { 3627 retval = em28xx_audio_setup(dev); 3628 if (retval) 3629 return -ENODEV; 3630 em28xx_init_extension(dev); 3631 3632 return 0; 3633 } 3634 3635 em28xx_pre_card_setup(dev); 3636 3637 rt_mutex_init(&dev->i2c_bus_lock); 3638 3639 /* register i2c bus 0 */ 3640 if (dev->board.is_em2800) 3641 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3642 else 3643 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3644 if (retval < 0) { 3645 dev_err(&dev->intf->dev, 3646 "%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3647 __func__, retval); 3648 return retval; 3649 } 3650 3651 /* register i2c bus 1 */ 3652 if (dev->def_i2c_bus) { 3653 if (dev->is_em25xx) 3654 retval = em28xx_i2c_register(dev, 1, 3655 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3656 else 3657 retval = em28xx_i2c_register(dev, 1, 3658 EM28XX_I2C_ALGO_EM28XX); 3659 if (retval < 0) { 3660 dev_err(&dev->intf->dev, 3661 "%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3662 __func__, retval); 3663 3664 em28xx_i2c_unregister(dev, 0); 3665 3666 return retval; 3667 } 3668 } 3669 3670 /* Do board specific init and eeprom reading */ 3671 em28xx_card_setup(dev); 3672 3673 return 0; 3674 } 3675 3676 static int em28xx_duplicate_dev(struct em28xx *dev) 3677 { 3678 int nr; 3679 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL); 3680 3681 if (!sec_dev) { 3682 dev->dev_next = NULL; 3683 return -ENOMEM; 3684 } 3685 /* Check to see next free device and mark as used */ 3686 do { 3687 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3688 if (nr >= EM28XX_MAXBOARDS) { 3689 /* No free device slots */ 3690 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n", 3691 EM28XX_MAXBOARDS); 3692 kfree(sec_dev); 3693 dev->dev_next = NULL; 3694 return -ENOMEM; 3695 } 3696 } while (test_and_set_bit(nr, em28xx_devused)); 3697 sec_dev->devno = nr; 3698 snprintf(sec_dev->name, 28, "em28xx #%d", nr); 3699 sec_dev->dev_next = NULL; 3700 dev->dev_next = sec_dev; 3701 return 0; 3702 } 3703 3704 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3705 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3706 3707 static void em28xx_check_usb_descriptor(struct em28xx *dev, 3708 struct usb_device *udev, 3709 struct usb_interface *intf, 3710 int alt, int ep, 3711 bool *has_vendor_audio, 3712 bool *has_video, 3713 bool *has_dvb) 3714 { 3715 const struct usb_endpoint_descriptor *e; 3716 int sizedescr, size; 3717 3718 /* 3719 * NOTE: 3720 * 3721 * Old logic with support for isoc transfers only was: 3722 * 0x82 isoc => analog 3723 * 0x83 isoc => audio 3724 * 0x84 isoc => digital 3725 * 3726 * New logic with support for bulk transfers 3727 * 0x82 isoc => analog 3728 * 0x82 bulk => analog 3729 * 0x83 isoc* => audio 3730 * 0x84 isoc => digital 3731 * 0x84 bulk => analog or digital** 3732 * 0x85 isoc => digital TS2 3733 * 0x85 bulk => digital TS2 3734 * (*: audio should always be isoc) 3735 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3736 * 3737 * The new logic preserves backwards compatibility and 3738 * reflects the endpoint configurations we have seen 3739 * so far. But there might be devices for which this 3740 * logic is not sufficient... 3741 */ 3742 3743 e = &intf->altsetting[alt].endpoint[ep].desc; 3744 3745 if (!usb_endpoint_dir_in(e)) 3746 return; 3747 3748 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3749 size = sizedescr & 0x7ff; 3750 3751 if (udev->speed == USB_SPEED_HIGH) 3752 size = size * hb_mult(sizedescr); 3753 3754 /* Only inspect input endpoints */ 3755 3756 switch (e->bEndpointAddress) { 3757 case 0x82: 3758 *has_video = true; 3759 if (usb_endpoint_xfer_isoc(e)) { 3760 dev->analog_ep_isoc = e->bEndpointAddress; 3761 dev->alt_max_pkt_size_isoc[alt] = size; 3762 } else if (usb_endpoint_xfer_bulk(e)) { 3763 dev->analog_ep_bulk = e->bEndpointAddress; 3764 } 3765 return; 3766 case 0x83: 3767 if (usb_endpoint_xfer_isoc(e)) 3768 *has_vendor_audio = true; 3769 else 3770 dev_err(&intf->dev, 3771 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3772 return; 3773 case 0x84: 3774 if (*has_video && (usb_endpoint_xfer_bulk(e))) { 3775 dev->analog_ep_bulk = e->bEndpointAddress; 3776 } else { 3777 if (usb_endpoint_xfer_isoc(e)) { 3778 if (size > dev->dvb_max_pkt_size_isoc) { 3779 /* 3780 * 2) some manufacturers (e.g. Terratec) 3781 * disable endpoints by setting 3782 * wMaxPacketSize to 0 bytes for all 3783 * alt settings. So far, we've seen 3784 * this for DVB isoc endpoints only. 3785 */ 3786 *has_dvb = true; 3787 dev->dvb_ep_isoc = e->bEndpointAddress; 3788 dev->dvb_max_pkt_size_isoc = size; 3789 dev->dvb_alt_isoc = alt; 3790 } 3791 } else { 3792 *has_dvb = true; 3793 dev->dvb_ep_bulk = e->bEndpointAddress; 3794 } 3795 } 3796 return; 3797 case 0x85: 3798 if (usb_endpoint_xfer_isoc(e)) { 3799 if (size > dev->dvb_max_pkt_size_isoc_ts2) { 3800 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress; 3801 dev->dvb_max_pkt_size_isoc_ts2 = size; 3802 dev->dvb_alt_isoc = alt; 3803 } 3804 } else { 3805 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress; 3806 } 3807 return; 3808 } 3809 } 3810 3811 /* 3812 * em28xx_usb_probe() 3813 * checks for supported devices 3814 */ 3815 static int em28xx_usb_probe(struct usb_interface *intf, 3816 const struct usb_device_id *id) 3817 { 3818 struct usb_device *udev; 3819 struct em28xx *dev = NULL; 3820 int retval; 3821 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3822 int i, nr, try_bulk; 3823 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber; 3824 char *speed; 3825 3826 udev = usb_get_dev(interface_to_usbdev(intf)); 3827 3828 /* Check to see next free device and mark as used */ 3829 do { 3830 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3831 if (nr >= EM28XX_MAXBOARDS) { 3832 /* No free device slots */ 3833 dev_err(&intf->dev, 3834 "Driver supports up to %i em28xx boards.\n", 3835 EM28XX_MAXBOARDS); 3836 retval = -ENOMEM; 3837 goto err_no_slot; 3838 } 3839 } while (test_and_set_bit(nr, em28xx_devused)); 3840 3841 /* Don't register audio interfaces */ 3842 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3843 dev_info(&intf->dev, 3844 "audio device (%04x:%04x): interface %i, class %i\n", 3845 le16_to_cpu(udev->descriptor.idVendor), 3846 le16_to_cpu(udev->descriptor.idProduct), 3847 ifnum, 3848 intf->altsetting[0].desc.bInterfaceClass); 3849 3850 retval = -ENODEV; 3851 goto err; 3852 } 3853 3854 /* allocate memory for our device state and initialize it */ 3855 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3856 if (!dev) { 3857 retval = -ENOMEM; 3858 goto err; 3859 } 3860 3861 /* compute alternate max packet sizes */ 3862 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting, 3863 sizeof(dev->alt_max_pkt_size_isoc[0]), 3864 GFP_KERNEL); 3865 if (!dev->alt_max_pkt_size_isoc) { 3866 kfree(dev); 3867 retval = -ENOMEM; 3868 goto err; 3869 } 3870 3871 /* Get endpoints */ 3872 for (i = 0; i < intf->num_altsetting; i++) { 3873 int ep; 3874 3875 for (ep = 0; 3876 ep < intf->altsetting[i].desc.bNumEndpoints; 3877 ep++) 3878 em28xx_check_usb_descriptor(dev, udev, intf, 3879 i, ep, 3880 &has_vendor_audio, 3881 &has_video, 3882 &has_dvb); 3883 } 3884 3885 if (!(has_vendor_audio || has_video || has_dvb)) { 3886 retval = -ENODEV; 3887 goto err_free; 3888 } 3889 3890 switch (udev->speed) { 3891 case USB_SPEED_LOW: 3892 speed = "1.5"; 3893 break; 3894 case USB_SPEED_UNKNOWN: 3895 case USB_SPEED_FULL: 3896 speed = "12"; 3897 break; 3898 case USB_SPEED_HIGH: 3899 speed = "480"; 3900 break; 3901 default: 3902 speed = "unknown"; 3903 } 3904 3905 dev_info(&intf->dev, 3906 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", 3907 udev->manufacturer ? udev->manufacturer : "", 3908 udev->product ? udev->product : "", 3909 speed, 3910 le16_to_cpu(udev->descriptor.idVendor), 3911 le16_to_cpu(udev->descriptor.idProduct), 3912 ifnum, 3913 intf->altsetting->desc.bInterfaceNumber); 3914 3915 /* 3916 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3917 * video stream wouldn't likely work, since 12 Mbps is generally 3918 * not enough even for most Digital TV streams. 3919 */ 3920 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3921 dev_err(&intf->dev, "Device initialization failed.\n"); 3922 dev_err(&intf->dev, 3923 "Device must be connected to a high-speed USB 2.0 port.\n"); 3924 retval = -ENODEV; 3925 goto err_free; 3926 } 3927 3928 dev->devno = nr; 3929 dev->model = id->driver_info; 3930 dev->alt = -1; 3931 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3932 dev->has_video = has_video; 3933 dev->ifnum = ifnum; 3934 3935 dev->ts = PRIMARY_TS; 3936 snprintf(dev->name, 28, "em28xx"); 3937 dev->dev_next = NULL; 3938 3939 if (has_vendor_audio) { 3940 dev_info(&intf->dev, 3941 "Audio interface %i found (Vendor Class)\n", ifnum); 3942 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3943 } 3944 /* Checks if audio is provided by a USB Audio Class intf */ 3945 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3946 struct usb_interface *uif = udev->config->interface[i]; 3947 3948 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3949 if (has_vendor_audio) 3950 dev_err(&intf->dev, 3951 "em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3952 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3953 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3954 break; 3955 } 3956 } 3957 3958 if (has_video) 3959 dev_info(&intf->dev, "Video interface %i found:%s%s\n", 3960 ifnum, 3961 dev->analog_ep_bulk ? " bulk" : "", 3962 dev->analog_ep_isoc ? " isoc" : ""); 3963 if (has_dvb) 3964 dev_info(&intf->dev, "DVB interface %i found:%s%s\n", 3965 ifnum, 3966 dev->dvb_ep_bulk ? " bulk" : "", 3967 dev->dvb_ep_isoc ? " isoc" : ""); 3968 3969 dev->num_alt = intf->num_altsetting; 3970 3971 if ((unsigned int)card[nr] < em28xx_bcount) 3972 dev->model = card[nr]; 3973 3974 /* save our data pointer in this intf device */ 3975 usb_set_intfdata(intf, dev); 3976 3977 /* allocate device struct and check if the device is a webcam */ 3978 mutex_init(&dev->lock); 3979 retval = em28xx_init_dev(dev, udev, intf, nr); 3980 if (retval) 3981 goto err_free; 3982 3983 if (usb_xfer_mode < 0) { 3984 if (dev->is_webcam) 3985 try_bulk = 1; 3986 else 3987 try_bulk = 0; 3988 } else { 3989 try_bulk = usb_xfer_mode > 0; 3990 } 3991 3992 /* Disable V4L2 if the device doesn't have a decoder or image sensor */ 3993 if (has_video && 3994 dev->board.decoder == EM28XX_NODECODER && 3995 dev->em28xx_sensor == EM28XX_NOSENSOR) { 3996 dev_err(&intf->dev, 3997 "Currently, V4L2 is not supported on this model\n"); 3998 has_video = false; 3999 dev->has_video = false; 4000 } 4001 4002 if (dev->board.has_dual_ts && 4003 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) { 4004 /* 4005 * The logic with sets alternate is not ready for dual-tuners 4006 * which analog modes. 4007 */ 4008 dev_err(&intf->dev, 4009 "We currently don't support analog TV or stream capture on dual tuners.\n"); 4010 has_video = false; 4011 } 4012 4013 /* Select USB transfer types to use */ 4014 if (has_video) { 4015 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 4016 dev->analog_xfer_bulk = 1; 4017 dev_info(&intf->dev, "analog set to %s mode.\n", 4018 dev->analog_xfer_bulk ? "bulk" : "isoc"); 4019 } 4020 if (has_dvb) { 4021 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 4022 dev->dvb_xfer_bulk = 1; 4023 dev_info(&intf->dev, "dvb set to %s mode.\n", 4024 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 4025 } 4026 4027 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) { 4028 dev->dev_next->ts = SECONDARY_TS; 4029 dev->dev_next->alt = -1; 4030 dev->dev_next->is_audio_only = has_vendor_audio && 4031 !(has_video || has_dvb); 4032 dev->dev_next->has_video = false; 4033 dev->dev_next->ifnum = ifnum; 4034 dev->dev_next->model = id->driver_info; 4035 4036 mutex_init(&dev->dev_next->lock); 4037 retval = em28xx_init_dev(dev->dev_next, udev, intf, 4038 dev->dev_next->devno); 4039 if (retval) 4040 goto err_free; 4041 4042 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */ 4043 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */ 4044 4045 if (usb_xfer_mode < 0) { 4046 if (dev->dev_next->is_webcam) 4047 try_bulk = 1; 4048 else 4049 try_bulk = 0; 4050 } else { 4051 try_bulk = usb_xfer_mode > 0; 4052 } 4053 4054 /* Select USB transfer types to use */ 4055 if (has_dvb) { 4056 if (!dev->dvb_ep_isoc_ts2 || 4057 (try_bulk && dev->dvb_ep_bulk_ts2)) 4058 dev->dev_next->dvb_xfer_bulk = 1; 4059 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n", 4060 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc"); 4061 } 4062 4063 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2; 4064 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2; 4065 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2; 4066 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc; 4067 4068 /* Configuare hardware to support TS2*/ 4069 if (dev->dvb_xfer_bulk) { 4070 /* The ep4 and ep5 are configuared for BULK */ 4071 em28xx_write_reg(dev, 0x0b, 0x96); 4072 mdelay(100); 4073 em28xx_write_reg(dev, 0x0b, 0x80); 4074 mdelay(100); 4075 } else { 4076 /* The ep4 and ep5 are configuared for ISO */ 4077 em28xx_write_reg(dev, 0x0b, 0x96); 4078 mdelay(100); 4079 em28xx_write_reg(dev, 0x0b, 0x82); 4080 mdelay(100); 4081 } 4082 4083 kref_init(&dev->dev_next->ref); 4084 } 4085 4086 kref_init(&dev->ref); 4087 4088 request_modules(dev); 4089 4090 /* 4091 * Do it at the end, to reduce dynamic configuration changes during 4092 * the device init. Yet, as request_modules() can be async, the 4093 * topology will likely change after the load of the em28xx subdrivers. 4094 */ 4095 #ifdef CONFIG_MEDIA_CONTROLLER 4096 retval = media_device_register(dev->media_dev); 4097 #endif 4098 4099 return 0; 4100 4101 err_free: 4102 kfree(dev->alt_max_pkt_size_isoc); 4103 kfree(dev); 4104 4105 err: 4106 clear_bit(nr, em28xx_devused); 4107 4108 err_no_slot: 4109 usb_put_dev(udev); 4110 return retval; 4111 } 4112 4113 /* 4114 * em28xx_usb_disconnect() 4115 * called when the device gets disconnected 4116 * video device will be unregistered on v4l2_close in case it is still open 4117 */ 4118 static void em28xx_usb_disconnect(struct usb_interface *intf) 4119 { 4120 struct em28xx *dev; 4121 4122 dev = usb_get_intfdata(intf); 4123 usb_set_intfdata(intf, NULL); 4124 4125 if (!dev) 4126 return; 4127 4128 if (dev->dev_next) { 4129 dev->dev_next->disconnected = 1; 4130 dev_info(&dev->intf->dev, "Disconnecting %s\n", 4131 dev->dev_next->name); 4132 } 4133 4134 dev->disconnected = 1; 4135 4136 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name); 4137 4138 flush_request_modules(dev); 4139 4140 em28xx_close_extension(dev); 4141 4142 if (dev->dev_next) 4143 em28xx_release_resources(dev->dev_next); 4144 em28xx_release_resources(dev); 4145 4146 if (dev->dev_next) { 4147 kref_put(&dev->dev_next->ref, em28xx_free_device); 4148 dev->dev_next = NULL; 4149 } 4150 kref_put(&dev->ref, em28xx_free_device); 4151 } 4152 4153 static int em28xx_usb_suspend(struct usb_interface *intf, 4154 pm_message_t message) 4155 { 4156 struct em28xx *dev; 4157 4158 dev = usb_get_intfdata(intf); 4159 if (!dev) 4160 return 0; 4161 em28xx_suspend_extension(dev); 4162 return 0; 4163 } 4164 4165 static int em28xx_usb_resume(struct usb_interface *intf) 4166 { 4167 struct em28xx *dev; 4168 4169 dev = usb_get_intfdata(intf); 4170 if (!dev) 4171 return 0; 4172 em28xx_resume_extension(dev); 4173 return 0; 4174 } 4175 4176 static struct usb_driver em28xx_usb_driver = { 4177 .name = "em28xx", 4178 .probe = em28xx_usb_probe, 4179 .disconnect = em28xx_usb_disconnect, 4180 .suspend = em28xx_usb_suspend, 4181 .resume = em28xx_usb_resume, 4182 .reset_resume = em28xx_usb_resume, 4183 .id_table = em28xx_id_table, 4184 }; 4185 4186 module_usb_driver(em28xx_usb_driver); 4187