1 /* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card 2 * 3 * Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org) 4 * Copyright (C) 2006 Marco Gittler (g.marco@freenet.de) 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the Free 8 * Software Foundation, version 2. 9 * 10 * see Documentation/dvb/README.dvb-usb for more information 11 */ 12 13 #define DVB_USB_LOG_PREFIX "opera" 14 15 #include "dvb-usb.h" 16 #include "stv0299.h" 17 18 #define OPERA_READ_MSG 0 19 #define OPERA_WRITE_MSG 1 20 #define OPERA_I2C_TUNER 0xd1 21 22 #define READ_FX2_REG_REQ 0xba 23 #define READ_MAC_ADDR 0x08 24 #define OPERA_WRITE_FX2 0xbb 25 #define OPERA_TUNER_REQ 0xb1 26 #define REG_1F_SYMBOLRATE_BYTE0 0x1f 27 #define REG_20_SYMBOLRATE_BYTE1 0x20 28 #define REG_21_SYMBOLRATE_BYTE2 0x21 29 30 #define ADDR_B600_VOLTAGE_13V (0x02) 31 #define ADDR_B601_VOLTAGE_18V (0x03) 32 #define ADDR_B1A6_STREAM_CTRL (0x04) 33 #define ADDR_B880_READ_REMOTE (0x05) 34 35 struct opera1_state { 36 u32 last_key_pressed; 37 }; 38 struct rc_map_opera_table { 39 u32 keycode; 40 u32 event; 41 }; 42 43 static int dvb_usb_opera1_debug; 44 module_param_named(debug, dvb_usb_opera1_debug, int, 0644); 45 MODULE_PARM_DESC(debug, 46 "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." 47 DVB_USB_DEBUG_STATUS); 48 49 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 50 51 52 static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, 53 u8 * data, u16 len, int flags) 54 { 55 int ret; 56 u8 tmp; 57 u8 *buf; 58 unsigned int pipe = (flags == OPERA_READ_MSG) ? 59 usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0); 60 u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; 61 62 buf = kmalloc(len, GFP_KERNEL); 63 if (!buf) 64 return -ENOMEM; 65 66 if (flags == OPERA_WRITE_MSG) 67 memcpy(buf, data, len); 68 ret = usb_control_msg(dev, pipe, request, 69 request_type | USB_TYPE_VENDOR, value, 0x0, 70 buf, len, 2000); 71 72 if (request == OPERA_TUNER_REQ) { 73 tmp = buf[0]; 74 if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 75 OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR, 76 0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) { 77 ret = 0; 78 goto out; 79 } 80 buf[0] = tmp; 81 } 82 if (flags == OPERA_READ_MSG) 83 memcpy(data, buf, len); 84 out: 85 kfree(buf); 86 return ret; 87 } 88 89 /* I2C */ 90 91 static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr, 92 u8 * buf, u16 len) 93 { 94 int ret = 0; 95 u8 request; 96 u16 value; 97 98 if (!dev) { 99 info("no usb_device"); 100 return -EINVAL; 101 } 102 if (mutex_lock_interruptible(&dev->usb_mutex) < 0) 103 return -EAGAIN; 104 105 switch (addr>>1){ 106 case ADDR_B600_VOLTAGE_13V: 107 request=0xb6; 108 value=0x00; 109 break; 110 case ADDR_B601_VOLTAGE_18V: 111 request=0xb6; 112 value=0x01; 113 break; 114 case ADDR_B1A6_STREAM_CTRL: 115 request=0xb1; 116 value=0xa6; 117 break; 118 case ADDR_B880_READ_REMOTE: 119 request=0xb8; 120 value=0x80; 121 break; 122 default: 123 request=0xb1; 124 value=addr; 125 } 126 ret = opera1_xilinx_rw(dev->udev, request, 127 value, buf, len, 128 addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG); 129 130 mutex_unlock(&dev->usb_mutex); 131 return ret; 132 } 133 134 static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], 135 int num) 136 { 137 struct dvb_usb_device *d = i2c_get_adapdata(adap); 138 int i = 0, tmp = 0; 139 140 if (!d) 141 return -ENODEV; 142 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 143 return -EAGAIN; 144 145 for (i = 0; i < num; i++) { 146 if ((tmp = opera1_usb_i2c_msgxfer(d, 147 (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), 148 msg[i].buf, 149 msg[i].len 150 )) != msg[i].len) { 151 break; 152 } 153 if (dvb_usb_opera1_debug & 0x10) 154 info("sending i2c message %d %d", tmp, msg[i].len); 155 } 156 mutex_unlock(&d->i2c_mutex); 157 return num; 158 } 159 160 static u32 opera1_i2c_func(struct i2c_adapter *adapter) 161 { 162 return I2C_FUNC_I2C; 163 } 164 165 static struct i2c_algorithm opera1_i2c_algo = { 166 .master_xfer = opera1_i2c_xfer, 167 .functionality = opera1_i2c_func, 168 }; 169 170 static int opera1_set_voltage(struct dvb_frontend *fe, 171 enum fe_sec_voltage voltage) 172 { 173 static u8 command_13v[1]={0x00}; 174 static u8 command_18v[1]={0x01}; 175 struct i2c_msg msg[] = { 176 {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1}, 177 }; 178 struct dvb_usb_adapter *udev_adap = 179 (struct dvb_usb_adapter *)(fe->dvb->priv); 180 if (voltage == SEC_VOLTAGE_18) { 181 msg[0].addr = ADDR_B601_VOLTAGE_18V; 182 msg[0].buf = command_18v; 183 } 184 i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); 185 return 0; 186 } 187 188 static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, 189 u32 ratio) 190 { 191 stv0299_writereg(fe, 0x13, 0x98); 192 stv0299_writereg(fe, 0x14, 0x95); 193 stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff); 194 stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff); 195 stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0); 196 return 0; 197 198 } 199 static u8 opera1_inittab[] = { 200 0x00, 0xa1, 201 0x01, 0x15, 202 0x02, 0x30, 203 0x03, 0x00, 204 0x04, 0x7d, 205 0x05, 0x05, 206 0x06, 0x02, 207 0x07, 0x00, 208 0x0b, 0x00, 209 0x0c, 0x01, 210 0x0d, 0x81, 211 0x0e, 0x44, 212 0x0f, 0x19, 213 0x10, 0x3f, 214 0x11, 0x84, 215 0x12, 0xda, 216 0x13, 0x98, 217 0x14, 0x95, 218 0x15, 0xc9, 219 0x16, 0xeb, 220 0x17, 0x00, 221 0x18, 0x19, 222 0x19, 0x8b, 223 0x1a, 0x00, 224 0x1b, 0x82, 225 0x1c, 0x7f, 226 0x1d, 0x00, 227 0x1e, 0x00, 228 REG_1F_SYMBOLRATE_BYTE0, 0x06, 229 REG_20_SYMBOLRATE_BYTE1, 0x50, 230 REG_21_SYMBOLRATE_BYTE2, 0x10, 231 0x22, 0x00, 232 0x23, 0x00, 233 0x24, 0x37, 234 0x25, 0xbc, 235 0x26, 0x00, 236 0x27, 0x00, 237 0x28, 0x00, 238 0x29, 0x1e, 239 0x2a, 0x14, 240 0x2b, 0x1f, 241 0x2c, 0x09, 242 0x2d, 0x0a, 243 0x2e, 0x00, 244 0x2f, 0x00, 245 0x30, 0x00, 246 0x31, 0x1f, 247 0x32, 0x19, 248 0x33, 0xfc, 249 0x34, 0x13, 250 0xff, 0xff, 251 }; 252 253 static struct stv0299_config opera1_stv0299_config = { 254 .demod_address = 0xd0>>1, 255 .min_delay_ms = 100, 256 .mclk = 88000000UL, 257 .invert = 1, 258 .skip_reinit = 0, 259 .lock_output = STV0299_LOCKOUTPUT_0, 260 .volt13_op0_op1 = STV0299_VOLT13_OP0, 261 .inittab = opera1_inittab, 262 .set_symbol_rate = opera1_stv0299_set_symbol_rate, 263 }; 264 265 static int opera1_frontend_attach(struct dvb_usb_adapter *d) 266 { 267 d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config, 268 &d->dev->i2c_adap); 269 if ((d->fe_adap[0].fe) != NULL) { 270 d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage; 271 return 0; 272 } 273 info("not attached stv0299"); 274 return -EIO; 275 } 276 277 static int opera1_tuner_attach(struct dvb_usb_adapter *adap) 278 { 279 dvb_attach( 280 dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1, 281 &adap->dev->i2c_adap, DVB_PLL_OPERA1 282 ); 283 return 0; 284 } 285 286 static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff) 287 { 288 u8 val = onoff ? 0x01 : 0x00; 289 290 if (dvb_usb_opera1_debug) 291 info("power %s", onoff ? "on" : "off"); 292 return opera1_xilinx_rw(d->udev, 0xb7, val, 293 &val, 1, OPERA_WRITE_MSG); 294 } 295 296 static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) 297 { 298 static u8 buf_start[2] = { 0xff, 0x03 }; 299 static u8 buf_stop[2] = { 0xff, 0x00 }; 300 struct i2c_msg start_tuner[] = { 301 {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2}, 302 }; 303 if (dvb_usb_opera1_debug) 304 info("streaming %s", onoff ? "on" : "off"); 305 i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1); 306 return 0; 307 } 308 309 static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, 310 int onoff) 311 { 312 u8 b_pid[3]; 313 struct i2c_msg msg[] = { 314 {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, 315 }; 316 if (dvb_usb_opera1_debug) 317 info("pidfilter index: %d pid: %d %s", index, pid, 318 onoff ? "on" : "off"); 319 b_pid[0] = (2 * index) + 4; 320 b_pid[1] = onoff ? (pid & 0xff) : (0x00); 321 b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00); 322 i2c_transfer(&adap->dev->i2c_adap, msg, 1); 323 return 0; 324 } 325 326 static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) 327 { 328 int u = 0x04; 329 u8 b_pid[3]; 330 struct i2c_msg msg[] = { 331 {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, 332 }; 333 if (dvb_usb_opera1_debug) 334 info("%s hw-pidfilter", onoff ? "enable" : "disable"); 335 for (; u < 0x7e; u += 2) { 336 b_pid[0] = u; 337 b_pid[1] = 0; 338 b_pid[2] = 0x80; 339 i2c_transfer(&adap->dev->i2c_adap, msg, 1); 340 } 341 return 0; 342 } 343 344 static struct rc_map_table rc_map_opera1_table[] = { 345 {0x5fa0, KEY_1}, 346 {0x51af, KEY_2}, 347 {0x5da2, KEY_3}, 348 {0x41be, KEY_4}, 349 {0x0bf5, KEY_5}, 350 {0x43bd, KEY_6}, 351 {0x47b8, KEY_7}, 352 {0x49b6, KEY_8}, 353 {0x05fa, KEY_9}, 354 {0x45ba, KEY_0}, 355 {0x09f6, KEY_CHANNELUP}, /*chanup */ 356 {0x1be5, KEY_CHANNELDOWN}, /*chandown */ 357 {0x5da3, KEY_VOLUMEDOWN}, /*voldown */ 358 {0x5fa1, KEY_VOLUMEUP}, /*volup */ 359 {0x07f8, KEY_SPACE}, /*tab */ 360 {0x1fe1, KEY_OK}, /*play ok */ 361 {0x1be4, KEY_ZOOM}, /*zoom */ 362 {0x59a6, KEY_MUTE}, /*mute */ 363 {0x5ba5, KEY_RADIO}, /*tv/f */ 364 {0x19e7, KEY_RECORD}, /*rec */ 365 {0x01fe, KEY_STOP}, /*Stop */ 366 {0x03fd, KEY_PAUSE}, /*pause */ 367 {0x03fc, KEY_SCREEN}, /*<- -> */ 368 {0x07f9, KEY_CAMERA}, /*capture */ 369 {0x47b9, KEY_ESC}, /*exit */ 370 {0x43bc, KEY_POWER2}, /*power */ 371 }; 372 373 static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state) 374 { 375 struct opera1_state *opst = dev->priv; 376 u8 rcbuffer[32]; 377 const u16 startmarker1 = 0x10ed; 378 const u16 startmarker2 = 0x11ec; 379 struct i2c_msg read_remote[] = { 380 {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32}, 381 }; 382 int i = 0; 383 u32 send_key = 0; 384 385 if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) { 386 for (i = 0; i < 32; i++) { 387 if (rcbuffer[i]) 388 send_key |= 1; 389 if (i < 31) 390 send_key = send_key << 1; 391 } 392 if (send_key & 0x8000) 393 send_key = (send_key << 1) | (send_key >> 15 & 0x01); 394 395 if (send_key == 0xffff && opst->last_key_pressed != 0) { 396 *state = REMOTE_KEY_REPEAT; 397 *event = opst->last_key_pressed; 398 return 0; 399 } 400 for (; send_key != 0;) { 401 if (send_key >> 16 == startmarker2) { 402 break; 403 } else if (send_key >> 16 == startmarker1) { 404 send_key = 405 (send_key & 0xfffeffff) | (startmarker1 << 16); 406 break; 407 } else 408 send_key >>= 1; 409 } 410 411 if (send_key == 0) 412 return 0; 413 414 send_key = (send_key & 0xffff) | 0x0100; 415 416 for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) { 417 if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) { 418 *state = REMOTE_KEY_PRESSED; 419 *event = rc_map_opera1_table[i].keycode; 420 opst->last_key_pressed = 421 rc_map_opera1_table[i].keycode; 422 break; 423 } 424 opst->last_key_pressed = 0; 425 } 426 } else 427 *state = REMOTE_NO_KEY_PRESSED; 428 return 0; 429 } 430 431 static struct usb_device_id opera1_table[] = { 432 {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)}, 433 {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)}, 434 {} 435 }; 436 437 MODULE_DEVICE_TABLE(usb, opera1_table); 438 439 static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) 440 { 441 u8 command[] = { READ_MAC_ADDR }; 442 opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG); 443 opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG); 444 return 0; 445 } 446 static int opera1_xilinx_load_firmware(struct usb_device *dev, 447 const char *filename) 448 { 449 const struct firmware *fw = NULL; 450 u8 *b, *p; 451 int ret = 0, i,fpgasize=40; 452 u8 testval; 453 info("start downloading fpga firmware %s",filename); 454 455 if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { 456 err("did not find the firmware file. (%s) " 457 "Please see linux/Documentation/dvb/ for more details on firmware-problems.", 458 filename); 459 return ret; 460 } else { 461 p = kmalloc(fw->size, GFP_KERNEL); 462 opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG); 463 if (p != NULL && testval != 0x67) { 464 465 u8 reset = 0, fpga_command = 0; 466 memcpy(p, fw->data, fw->size); 467 /* clear fpga ? */ 468 opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1, 469 OPERA_WRITE_MSG); 470 for (i = 0; i < fw->size;) { 471 if ( (fw->size - i) <fpgasize){ 472 fpgasize=fw->size-i; 473 } 474 b = (u8 *) p + i; 475 if (opera1_xilinx_rw 476 (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize, 477 OPERA_WRITE_MSG) != fpgasize 478 ) { 479 err("error while transferring firmware"); 480 ret = -EINVAL; 481 break; 482 } 483 i = i + fpgasize; 484 } 485 /* restart the CPU */ 486 if (ret || opera1_xilinx_rw 487 (dev, 0xa0, 0xe600, &reset, 1, 488 OPERA_WRITE_MSG) != 1) { 489 err("could not restart the USB controller CPU."); 490 ret = -EINVAL; 491 } 492 } 493 } 494 kfree(p); 495 release_firmware(fw); 496 return ret; 497 } 498 499 static struct dvb_usb_device_properties opera1_properties = { 500 .caps = DVB_USB_IS_AN_I2C_ADAPTER, 501 .usb_ctrl = CYPRESS_FX2, 502 .firmware = "dvb-usb-opera-01.fw", 503 .size_of_priv = sizeof(struct opera1_state), 504 505 .power_ctrl = opera1_power_ctrl, 506 .i2c_algo = &opera1_i2c_algo, 507 508 .rc.legacy = { 509 .rc_map_table = rc_map_opera1_table, 510 .rc_map_size = ARRAY_SIZE(rc_map_opera1_table), 511 .rc_interval = 200, 512 .rc_query = opera1_rc_query, 513 }, 514 .read_mac_address = opera1_read_mac_address, 515 .generic_bulk_ctrl_endpoint = 0x00, 516 /* parameter for the MPEG2-data transfer */ 517 .num_adapters = 1, 518 .adapter = { 519 { 520 .num_frontends = 1, 521 .fe = {{ 522 .frontend_attach = opera1_frontend_attach, 523 .streaming_ctrl = opera1_streaming_ctrl, 524 .tuner_attach = opera1_tuner_attach, 525 .caps = 526 DVB_USB_ADAP_HAS_PID_FILTER | 527 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 528 .pid_filter = opera1_pid_filter, 529 .pid_filter_ctrl = opera1_pid_filter_control, 530 .pid_filter_count = 252, 531 .stream = { 532 .type = USB_BULK, 533 .count = 10, 534 .endpoint = 0x82, 535 .u = { 536 .bulk = { 537 .buffersize = 4096, 538 } 539 } 540 }, 541 }}, 542 } 543 }, 544 .num_device_descs = 1, 545 .devices = { 546 {"Opera1 DVB-S USB2.0", 547 {&opera1_table[0], NULL}, 548 {&opera1_table[1], NULL}, 549 }, 550 } 551 }; 552 553 static int opera1_probe(struct usb_interface *intf, 554 const struct usb_device_id *id) 555 { 556 struct usb_device *udev = interface_to_usbdev(intf); 557 558 if (le16_to_cpu(udev->descriptor.idProduct) == USB_PID_OPERA1_WARM && 559 le16_to_cpu(udev->descriptor.idVendor) == USB_VID_OPERA1 && 560 opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0 561 ) { 562 return -EINVAL; 563 } 564 565 if (0 != dvb_usb_device_init(intf, &opera1_properties, 566 THIS_MODULE, NULL, adapter_nr)) 567 return -EINVAL; 568 return 0; 569 } 570 571 static struct usb_driver opera1_driver = { 572 .name = "opera1", 573 .probe = opera1_probe, 574 .disconnect = dvb_usb_device_exit, 575 .id_table = opera1_table, 576 }; 577 578 module_usb_driver(opera1_driver); 579 580 MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org"); 581 MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de"); 582 MODULE_DESCRIPTION("Driver for Opera1 DVB-S device"); 583 MODULE_VERSION("0.1"); 584 MODULE_LICENSE("GPL"); 585