xref: /linux/drivers/media/usb/dvb-usb/dtv5100.c (revision 56fb34d86e875dbb0d3e6a81c5d3d035db373031)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T
4  *
5  * Copyright (C) 2008  Antoine Jacquet <royale@zerezo.com>
6  * http://royale.zerezo.com/dtv5100/
7  *
8  * Inspired by gl861.c and au6610.c drivers
9  */
10 
11 #include "dtv5100.h"
12 #include "zl10353.h"
13 #include "qt1010.h"
14 
15 /* debug */
16 static int dvb_usb_dtv5100_debug;
17 module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644);
18 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
19 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
20 
21 struct dtv5100_state {
22 	unsigned char data[80];
23 };
24 
25 static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr,
26 			   u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
27 {
28 	struct dtv5100_state *st = d->priv;
29 	u8 request;
30 	u8 type;
31 	u16 value;
32 	u16 index;
33 
34 	switch (wlen) {
35 	case 1:
36 		/* write { reg }, read { value } */
37 		request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ :
38 							DTV5100_TUNER_READ);
39 		type = USB_TYPE_VENDOR | USB_DIR_IN;
40 		value = 0;
41 		break;
42 	case 2:
43 		/* write { reg, value } */
44 		request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE :
45 							DTV5100_TUNER_WRITE);
46 		type = USB_TYPE_VENDOR | USB_DIR_OUT;
47 		value = wbuf[1];
48 		break;
49 	default:
50 		warn("wlen = %x, aborting.", wlen);
51 		return -EINVAL;
52 	}
53 	index = (addr << 8) + wbuf[0];
54 
55 	memcpy(st->data, rbuf, rlen);
56 	msleep(1); /* avoid I2C errors */
57 	return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request,
58 			       type, value, index, st->data, rlen,
59 			       DTV5100_USB_TIMEOUT);
60 }
61 
62 /* I2C */
63 static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
64 			    int num)
65 {
66 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
67 	int i;
68 
69 	if (num > 2)
70 		return -EINVAL;
71 
72 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
73 		return -EAGAIN;
74 
75 	for (i = 0; i < num; i++) {
76 		/* write/read request */
77 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
78 			if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf,
79 					    msg[i].len, msg[i+1].buf,
80 					    msg[i+1].len) < 0)
81 				break;
82 			i++;
83 		} else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf,
84 					   msg[i].len, NULL, 0) < 0)
85 				break;
86 	}
87 
88 	mutex_unlock(&d->i2c_mutex);
89 	return i;
90 }
91 
92 static u32 dtv5100_i2c_func(struct i2c_adapter *adapter)
93 {
94 	return I2C_FUNC_I2C;
95 }
96 
97 static struct i2c_algorithm dtv5100_i2c_algo = {
98 	.master_xfer   = dtv5100_i2c_xfer,
99 	.functionality = dtv5100_i2c_func,
100 };
101 
102 /* Callbacks for DVB USB */
103 static struct zl10353_config dtv5100_zl10353_config = {
104 	.demod_address = DTV5100_DEMOD_ADDR,
105 	.no_tuner = 1,
106 	.parallel_ts = 1,
107 };
108 
109 static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap)
110 {
111 	adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config,
112 			      &adap->dev->i2c_adap);
113 	if (adap->fe_adap[0].fe == NULL)
114 		return -EIO;
115 
116 	/* disable i2c gate, or it won't work... is this safe? */
117 	adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL;
118 
119 	return 0;
120 }
121 
122 static struct qt1010_config dtv5100_qt1010_config = {
123 	.i2c_address = DTV5100_TUNER_ADDR
124 };
125 
126 static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap)
127 {
128 	return dvb_attach(qt1010_attach,
129 			  adap->fe_adap[0].fe, &adap->dev->i2c_adap,
130 			  &dtv5100_qt1010_config) == NULL ? -ENODEV : 0;
131 }
132 
133 /* DVB USB Driver stuff */
134 static struct dvb_usb_device_properties dtv5100_properties;
135 
136 static int dtv5100_probe(struct usb_interface *intf,
137 			 const struct usb_device_id *id)
138 {
139 	int i, ret;
140 	struct usb_device *udev = interface_to_usbdev(intf);
141 
142 	/* initialize non qt1010/zl10353 part? */
143 	for (i = 0; dtv5100_init[i].request; i++) {
144 		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
145 				      dtv5100_init[i].request,
146 				      USB_TYPE_VENDOR | USB_DIR_OUT,
147 				      dtv5100_init[i].value,
148 				      dtv5100_init[i].index, NULL, 0,
149 				      DTV5100_USB_TIMEOUT);
150 		if (ret)
151 			return ret;
152 	}
153 
154 	ret = dvb_usb_device_init(intf, &dtv5100_properties,
155 				  THIS_MODULE, NULL, adapter_nr);
156 	if (ret)
157 		return ret;
158 
159 	return 0;
160 }
161 
162 static struct usb_device_id dtv5100_table[] = {
163 	{ USB_DEVICE(0x06be, 0xa232) },
164 	{ }		/* Terminating entry */
165 };
166 MODULE_DEVICE_TABLE(usb, dtv5100_table);
167 
168 static struct dvb_usb_device_properties dtv5100_properties = {
169 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
170 	.usb_ctrl = DEVICE_SPECIFIC,
171 
172 	.size_of_priv = sizeof(struct dtv5100_state),
173 
174 	.num_adapters = 1,
175 	.adapter = {{
176 		.num_frontends = 1,
177 		.fe = {{
178 		.frontend_attach = dtv5100_frontend_attach,
179 		.tuner_attach    = dtv5100_tuner_attach,
180 
181 		.stream = {
182 			.type = USB_BULK,
183 			.count = 8,
184 			.endpoint = 0x82,
185 			.u = {
186 				.bulk = {
187 					.buffersize = 4096,
188 				}
189 			}
190 		},
191 		}},
192 	} },
193 
194 	.i2c_algo = &dtv5100_i2c_algo,
195 
196 	.num_device_descs = 1,
197 	.devices = {
198 		{
199 			.name = "AME DTV-5100 USB2.0 DVB-T",
200 			.cold_ids = { NULL },
201 			.warm_ids = { &dtv5100_table[0], NULL },
202 		},
203 	}
204 };
205 
206 static struct usb_driver dtv5100_driver = {
207 	.name		= "dvb_usb_dtv5100",
208 	.probe		= dtv5100_probe,
209 	.disconnect	= dvb_usb_device_exit,
210 	.id_table	= dtv5100_table,
211 };
212 
213 module_usb_driver(dtv5100_driver);
214 
215 MODULE_AUTHOR(DRIVER_AUTHOR);
216 MODULE_DESCRIPTION(DRIVER_DESC);
217 MODULE_LICENSE("GPL");
218