1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * mxl111sf-phy.c - driver for the MaxLinear MXL111SF 4 * 5 * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org> 6 */ 7 8 #include "mxl111sf-phy.h" 9 #include "mxl111sf-reg.h" 10 11 int mxl111sf_init_tuner_demod(struct mxl111sf_state *state) 12 { 13 struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = { 14 {0x07, 0xff, 0x0c}, 15 {0x58, 0xff, 0x9d}, 16 {0x09, 0xff, 0x00}, 17 {0x06, 0xff, 0x06}, 18 {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */ 19 {0x8d, 0x01, 0x01}, /* NEGATE_Q */ 20 {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */ 21 {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */ 22 {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */ 23 {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */ 24 {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */ 25 {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */ 26 {0x88, 0xff, 0xf0}, /* INF_THD = 240 */ 27 {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */ 28 {0x00, 0xff, 0x01}, /* Change to page 1 */ 29 {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */ 30 {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */ 31 {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */ 32 {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */ 33 {0x00, 0xff, 0x00}, /* Change to page 0 */ 34 {0, 0, 0} 35 }; 36 37 mxl_debug("()"); 38 39 return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default); 40 } 41 42 int mxl1x1sf_soft_reset(struct mxl111sf_state *state) 43 { 44 int ret; 45 mxl_debug("()"); 46 47 ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */ 48 if (mxl_fail(ret)) 49 goto fail; 50 ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */ 51 mxl_fail(ret); 52 fail: 53 return ret; 54 } 55 56 int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode) 57 { 58 int ret; 59 60 mxl_debug("(%s)", MXL_SOC_MODE == mode ? 61 "MXL_SOC_MODE" : "MXL_TUNER_MODE"); 62 63 /* set device mode */ 64 ret = mxl111sf_write_reg(state, 0x03, 65 MXL_SOC_MODE == mode ? 0x01 : 0x00); 66 if (mxl_fail(ret)) 67 goto fail; 68 69 ret = mxl111sf_write_reg_mask(state, 70 0x7d, 0x40, MXL_SOC_MODE == mode ? 71 0x00 : /* enable impulse noise filter, 72 INF_BYP = 0 */ 73 0x40); /* disable impulse noise filter, 74 INF_BYP = 1 */ 75 if (mxl_fail(ret)) 76 goto fail; 77 78 state->device_mode = mode; 79 fail: 80 return ret; 81 } 82 83 /* power up tuner */ 84 int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff) 85 { 86 mxl_debug("(%d)", onoff); 87 88 return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00); 89 } 90 91 int mxl111sf_disable_656_port(struct mxl111sf_state *state) 92 { 93 mxl_debug("()"); 94 95 return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00); 96 } 97 98 int mxl111sf_enable_usb_output(struct mxl111sf_state *state) 99 { 100 mxl_debug("()"); 101 102 return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00); 103 } 104 105 /* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */ 106 int mxl111sf_config_mpeg_in(struct mxl111sf_state *state, 107 unsigned int parallel_serial, 108 unsigned int msb_lsb_1st, 109 unsigned int clock_phase, 110 unsigned int mpeg_valid_pol, 111 unsigned int mpeg_sync_pol) 112 { 113 int ret; 114 u8 mode, tmp; 115 116 mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st, 117 clock_phase, mpeg_valid_pol, mpeg_sync_pol); 118 119 /* Enable PIN MUX */ 120 ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX); 121 mxl_fail(ret); 122 123 /* Configure MPEG Clock phase */ 124 mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode); 125 126 if (clock_phase == TSIF_NORMAL) 127 mode &= ~V6_INVERTED_CLK_PHASE; 128 else 129 mode |= V6_INVERTED_CLK_PHASE; 130 131 ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode); 132 mxl_fail(ret); 133 134 /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity 135 * Get current configuration */ 136 ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode); 137 mxl_fail(ret); 138 139 /* Data Input mode */ 140 if (parallel_serial == TSIF_INPUT_PARALLEL) { 141 /* Disable serial mode */ 142 mode &= ~V6_MPEG_IN_DATA_SERIAL; 143 144 /* Enable Parallel mode */ 145 mode |= V6_MPEG_IN_DATA_PARALLEL; 146 } else { 147 /* Disable Parallel mode */ 148 mode &= ~V6_MPEG_IN_DATA_PARALLEL; 149 150 /* Enable Serial Mode */ 151 mode |= V6_MPEG_IN_DATA_SERIAL; 152 153 /* If serial interface is chosen, configure 154 MSB or LSB order in transmission */ 155 ret = mxl111sf_read_reg(state, 156 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, 157 &tmp); 158 mxl_fail(ret); 159 160 if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED) 161 tmp |= V6_MPEG_SER_MSB_FIRST; 162 else 163 tmp &= ~V6_MPEG_SER_MSB_FIRST; 164 165 ret = mxl111sf_write_reg(state, 166 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, 167 tmp); 168 mxl_fail(ret); 169 } 170 171 /* MPEG Sync polarity */ 172 if (mpeg_sync_pol == TSIF_NORMAL) 173 mode &= ~V6_INVERTED_MPEG_SYNC; 174 else 175 mode |= V6_INVERTED_MPEG_SYNC; 176 177 /* MPEG Valid polarity */ 178 if (mpeg_valid_pol == 0) 179 mode &= ~V6_INVERTED_MPEG_VALID; 180 else 181 mode |= V6_INVERTED_MPEG_VALID; 182 183 ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode); 184 mxl_fail(ret); 185 186 return ret; 187 } 188 189 int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size) 190 { 191 static struct mxl111sf_reg_ctrl_info init_i2s[] = { 192 {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */ 193 {0x15, 0x60, 0x60}, /* Enable I2S */ 194 {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB, 195 Inverted 656 Clock, I2S_SOFT_RESET, 196 0 : Normal operation, 1 : Reset State */ 197 #if 0 198 {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */ 199 #endif 200 {0x00, 0xff, 0x02}, /* Change to Control Page */ 201 {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */ 202 {0x00, 0xff, 0x00}, 203 {0, 0, 0} 204 }; 205 int ret; 206 207 mxl_debug("(0x%02x)", sample_size); 208 209 ret = mxl111sf_ctrl_program_regs(state, init_i2s); 210 if (mxl_fail(ret)) 211 goto fail; 212 213 ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size); 214 mxl_fail(ret); 215 fail: 216 return ret; 217 } 218 219 int mxl111sf_disable_i2s_port(struct mxl111sf_state *state) 220 { 221 static struct mxl111sf_reg_ctrl_info disable_i2s[] = { 222 {0x15, 0x40, 0x00}, 223 {0, 0, 0} 224 }; 225 226 mxl_debug("()"); 227 228 return mxl111sf_ctrl_program_regs(state, disable_i2s); 229 } 230 231 int mxl111sf_config_i2s(struct mxl111sf_state *state, 232 u8 msb_start_pos, u8 data_width) 233 { 234 int ret; 235 u8 tmp; 236 237 mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width); 238 239 ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp); 240 if (mxl_fail(ret)) 241 goto fail; 242 243 tmp &= 0xe0; 244 tmp |= msb_start_pos; 245 ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp); 246 if (mxl_fail(ret)) 247 goto fail; 248 249 ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp); 250 if (mxl_fail(ret)) 251 goto fail; 252 253 tmp &= 0xe0; 254 tmp |= data_width; 255 ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp); 256 mxl_fail(ret); 257 fail: 258 return ret; 259 } 260 261 int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) 262 { 263 u8 val; 264 int ret; 265 266 mxl_debug("(%d)", onoff); 267 268 ret = mxl111sf_write_reg(state, 0x00, 0x02); 269 if (mxl_fail(ret)) 270 goto fail; 271 272 ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val); 273 if (mxl_fail(ret)) 274 goto fail; 275 276 if (onoff) 277 val |= 0x04; 278 else 279 val &= ~0x04; 280 281 ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val); 282 if (mxl_fail(ret)) 283 goto fail; 284 285 ret = mxl111sf_write_reg(state, 0x00, 0x00); 286 mxl_fail(ret); 287 fail: 288 return ret; 289 } 290 291 int mxl111sf_idac_config(struct mxl111sf_state *state, 292 u8 control_mode, u8 current_setting, 293 u8 current_value, u8 hysteresis_value) 294 { 295 int ret; 296 u8 val; 297 /* current value will be set for both automatic & manual IDAC control */ 298 val = current_value; 299 300 if (control_mode == IDAC_MANUAL_CONTROL) { 301 /* enable manual control of IDAC */ 302 val |= IDAC_MANUAL_CONTROL_BIT_MASK; 303 304 if (current_setting == IDAC_CURRENT_SINKING_ENABLE) 305 /* enable current sinking in manual mode */ 306 val |= IDAC_CURRENT_SINKING_BIT_MASK; 307 else 308 /* disable current sinking in manual mode */ 309 val &= ~IDAC_CURRENT_SINKING_BIT_MASK; 310 } else { 311 /* disable manual control of IDAC */ 312 val &= ~IDAC_MANUAL_CONTROL_BIT_MASK; 313 314 /* set hysteresis value reg: 0x0B<5:0> */ 315 ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, 316 (hysteresis_value & 0x3F)); 317 mxl_fail(ret); 318 } 319 320 ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); 321 mxl_fail(ret); 322 323 return ret; 324 } 325