1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Afatech AF9035 DVB USB driver 4 * 5 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> 6 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> 7 */ 8 9 #include "af9035.h" 10 11 /* Max transfer size done by I2C transfer functions */ 12 #define MAX_XFER_SIZE 64 13 14 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 15 16 static u16 af9035_checksum(const u8 *buf, size_t len) 17 { 18 size_t i; 19 u16 checksum = 0; 20 21 for (i = 1; i < len; i++) { 22 if (i % 2) 23 checksum += buf[i] << 8; 24 else 25 checksum += buf[i]; 26 } 27 checksum = ~checksum; 28 29 return checksum; 30 } 31 32 static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) 33 { 34 #define REQ_HDR_LEN 4 /* send header size */ 35 #define ACK_HDR_LEN 3 /* rece header size */ 36 #define CHECKSUM_LEN 2 37 #define USB_TIMEOUT 2000 38 struct state *state = d_to_priv(d); 39 struct usb_interface *intf = d->intf; 40 int ret, wlen, rlen; 41 u16 checksum, tmp_checksum; 42 43 mutex_lock(&d->usb_mutex); 44 45 /* buffer overflow check */ 46 if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || 47 req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { 48 dev_err(&intf->dev, "too much data wlen=%d rlen=%d\n", 49 req->wlen, req->rlen); 50 ret = -EINVAL; 51 goto exit; 52 } 53 54 state->buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; 55 state->buf[1] = req->mbox; 56 state->buf[2] = req->cmd; 57 state->buf[3] = state->seq++; 58 memcpy(&state->buf[REQ_HDR_LEN], req->wbuf, req->wlen); 59 60 wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN; 61 rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; 62 63 /* calc and add checksum */ 64 checksum = af9035_checksum(state->buf, state->buf[0] - 1); 65 state->buf[state->buf[0] - 1] = (checksum >> 8); 66 state->buf[state->buf[0] - 0] = (checksum & 0xff); 67 68 /* no ack for these packets */ 69 if (req->cmd == CMD_FW_DL) 70 rlen = 0; 71 72 ret = dvb_usbv2_generic_rw_locked(d, 73 state->buf, wlen, state->buf, rlen); 74 if (ret) 75 goto exit; 76 77 /* no ack for those packets */ 78 if (req->cmd == CMD_FW_DL) 79 goto exit; 80 81 /* verify checksum */ 82 checksum = af9035_checksum(state->buf, rlen - 2); 83 tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1]; 84 if (tmp_checksum != checksum) { 85 dev_err(&intf->dev, "command=%02x checksum mismatch (%04x != %04x)\n", 86 req->cmd, tmp_checksum, checksum); 87 ret = -EIO; 88 goto exit; 89 } 90 91 /* check status */ 92 if (state->buf[2]) { 93 /* fw returns status 1 when IR code was not received */ 94 if (req->cmd == CMD_IR_GET || state->buf[2] == 1) { 95 ret = 1; 96 goto exit; 97 } 98 99 dev_dbg(&intf->dev, "command=%02x failed fw error=%d\n", 100 req->cmd, state->buf[2]); 101 ret = -EIO; 102 goto exit; 103 } 104 105 /* read request, copy returned data to return buf */ 106 if (req->rlen) 107 memcpy(req->rbuf, &state->buf[ACK_HDR_LEN], req->rlen); 108 exit: 109 mutex_unlock(&d->usb_mutex); 110 return ret; 111 } 112 113 /* write multiple registers */ 114 static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) 115 { 116 struct usb_interface *intf = d->intf; 117 u8 wbuf[MAX_XFER_SIZE]; 118 u8 mbox = (reg >> 16) & 0xff; 119 struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL }; 120 121 if (6 + len > sizeof(wbuf)) { 122 dev_warn(&intf->dev, "i2c wr: len=%d is too big!\n", len); 123 return -EOPNOTSUPP; 124 } 125 126 wbuf[0] = len; 127 wbuf[1] = 2; 128 wbuf[2] = 0; 129 wbuf[3] = 0; 130 wbuf[4] = (reg >> 8) & 0xff; 131 wbuf[5] = (reg >> 0) & 0xff; 132 memcpy(&wbuf[6], val, len); 133 134 return af9035_ctrl_msg(d, &req); 135 } 136 137 /* read multiple registers */ 138 static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) 139 { 140 u8 wbuf[] = { len, 2, 0, 0, (reg >> 8) & 0xff, reg & 0xff }; 141 u8 mbox = (reg >> 16) & 0xff; 142 struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val }; 143 144 return af9035_ctrl_msg(d, &req); 145 } 146 147 /* write single register */ 148 static int af9035_wr_reg(struct dvb_usb_device *d, u32 reg, u8 val) 149 { 150 return af9035_wr_regs(d, reg, &val, 1); 151 } 152 153 /* read single register */ 154 static int af9035_rd_reg(struct dvb_usb_device *d, u32 reg, u8 *val) 155 { 156 return af9035_rd_regs(d, reg, val, 1); 157 } 158 159 /* write single register with mask */ 160 static int af9035_wr_reg_mask(struct dvb_usb_device *d, u32 reg, u8 val, 161 u8 mask) 162 { 163 int ret; 164 u8 tmp; 165 166 /* no need for read if whole reg is written */ 167 if (mask != 0xff) { 168 ret = af9035_rd_regs(d, reg, &tmp, 1); 169 if (ret) 170 return ret; 171 172 val &= mask; 173 tmp &= ~mask; 174 val |= tmp; 175 } 176 177 return af9035_wr_regs(d, reg, &val, 1); 178 } 179 180 static int af9035_add_i2c_dev(struct dvb_usb_device *d, const char *type, 181 u8 addr, void *platform_data, struct i2c_adapter *adapter) 182 { 183 int ret, num; 184 struct state *state = d_to_priv(d); 185 struct usb_interface *intf = d->intf; 186 struct i2c_client *client; 187 struct i2c_board_info board_info = { 188 .addr = addr, 189 .platform_data = platform_data, 190 }; 191 192 strscpy(board_info.type, type, I2C_NAME_SIZE); 193 194 /* find first free client */ 195 for (num = 0; num < AF9035_I2C_CLIENT_MAX; num++) { 196 if (state->i2c_client[num] == NULL) 197 break; 198 } 199 200 dev_dbg(&intf->dev, "num=%d\n", num); 201 202 if (num == AF9035_I2C_CLIENT_MAX) { 203 dev_err(&intf->dev, "I2C client out of index\n"); 204 ret = -ENODEV; 205 goto err; 206 } 207 208 request_module("%s", board_info.type); 209 210 /* register I2C device */ 211 client = i2c_new_client_device(adapter, &board_info); 212 if (!i2c_client_has_driver(client)) { 213 dev_err(&intf->dev, "failed to bind i2c device to %s driver\n", type); 214 ret = -ENODEV; 215 goto err; 216 } 217 218 /* increase I2C driver usage count */ 219 if (!try_module_get(client->dev.driver->owner)) { 220 i2c_unregister_device(client); 221 ret = -ENODEV; 222 goto err; 223 } 224 225 state->i2c_client[num] = client; 226 return 0; 227 err: 228 dev_dbg(&intf->dev, "failed=%d\n", ret); 229 return ret; 230 } 231 232 static void af9035_del_i2c_dev(struct dvb_usb_device *d) 233 { 234 int num; 235 struct state *state = d_to_priv(d); 236 struct usb_interface *intf = d->intf; 237 struct i2c_client *client; 238 239 /* find last used client */ 240 num = AF9035_I2C_CLIENT_MAX; 241 while (num--) { 242 if (state->i2c_client[num] != NULL) 243 break; 244 } 245 246 dev_dbg(&intf->dev, "num=%d\n", num); 247 248 if (num == -1) { 249 dev_err(&intf->dev, "I2C client out of index\n"); 250 goto err; 251 } 252 253 client = state->i2c_client[num]; 254 255 /* decrease I2C driver usage count */ 256 module_put(client->dev.driver->owner); 257 258 /* unregister I2C device */ 259 i2c_unregister_device(client); 260 261 state->i2c_client[num] = NULL; 262 return; 263 err: 264 dev_dbg(&intf->dev, "failed\n"); 265 } 266 267 static int af9035_i2c_master_xfer(struct i2c_adapter *adap, 268 struct i2c_msg msg[], int num) 269 { 270 struct dvb_usb_device *d = i2c_get_adapdata(adap); 271 struct state *state = d_to_priv(d); 272 int ret; 273 274 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 275 return -EAGAIN; 276 277 /* 278 * AF9035 I2C sub header is 5 bytes long. Meaning of those bytes are: 279 * 0: data len 280 * 1: I2C addr << 1 281 * 2: reg addr len 282 * byte 3 and 4 can be used as reg addr 283 * 3: reg addr MSB 284 * used when reg addr len is set to 2 285 * 4: reg addr LSB 286 * used when reg addr len is set to 1 or 2 287 * 288 * For the simplify we do not use register addr at all. 289 * NOTE: As a firmware knows tuner type there is very small possibility 290 * there could be some tuner I2C hacks done by firmware and this may 291 * lead problems if firmware expects those bytes are used. 292 * 293 * TODO: Here is few hacks. AF9035 chip integrates AF9033 demodulator. 294 * IT9135 chip integrates AF9033 demodulator and RF tuner. For dual 295 * tuner devices, there is also external AF9033 demodulator connected 296 * via external I2C bus. All AF9033 demod I2C traffic, both single and 297 * dual tuner configuration, is covered by firmware - actual USB IO 298 * looks just like a memory access. 299 * In case of IT913x chip, there is own tuner driver. It is implemented 300 * currently as a I2C driver, even tuner IP block is likely build 301 * directly into the demodulator memory space and there is no own I2C 302 * bus. I2C subsystem does not allow register multiple devices to same 303 * bus, having same slave address. Due to that we reuse demod address, 304 * shifted by one bit, on that case. 305 * 306 * For IT930x we use a different command and the sub header is 307 * different as well: 308 * 0: data len 309 * 1: I2C bus (0x03 seems to be only value used) 310 * 2: I2C addr << 1 311 */ 312 #define AF9035_IS_I2C_XFER_WRITE_READ(_msg, _num) \ 313 (_num == 2 && !(_msg[0].flags & I2C_M_RD) && (_msg[1].flags & I2C_M_RD)) 314 #define AF9035_IS_I2C_XFER_WRITE(_msg, _num) \ 315 (_num == 1 && !(_msg[0].flags & I2C_M_RD)) 316 #define AF9035_IS_I2C_XFER_READ(_msg, _num) \ 317 (_num == 1 && (_msg[0].flags & I2C_M_RD)) 318 319 if (AF9035_IS_I2C_XFER_WRITE_READ(msg, num)) { 320 if (msg[0].len > 40 || msg[1].len > 40) { 321 /* TODO: correct limits > 40 */ 322 ret = -EOPNOTSUPP; 323 } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || 324 (msg[0].addr == state->af9033_i2c_addr[1])) { 325 if (msg[0].len < 3 || msg[1].len < 1) { 326 ret = -EOPNOTSUPP; 327 goto unlock; 328 } 329 /* demod access via firmware interface */ 330 u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | 331 msg[0].buf[2]; 332 333 if (msg[0].addr == state->af9033_i2c_addr[1]) 334 reg |= 0x100000; 335 336 ret = af9035_rd_regs(d, reg, &msg[1].buf[0], 337 msg[1].len); 338 } else if (state->no_read) { 339 memset(msg[1].buf, 0, msg[1].len); 340 ret = 0; 341 } else { 342 /* I2C write + read */ 343 u8 buf[MAX_XFER_SIZE]; 344 struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len, 345 buf, msg[1].len, msg[1].buf }; 346 347 if (state->chip_type == 0x9306) { 348 req.cmd = CMD_GENERIC_I2C_RD; 349 req.wlen = 3 + msg[0].len; 350 } 351 req.mbox |= ((msg[0].addr & 0x80) >> 3); 352 353 buf[0] = msg[1].len; 354 if (state->chip_type == 0x9306) { 355 buf[1] = 0x03; /* I2C bus */ 356 buf[2] = msg[0].addr << 1; 357 memcpy(&buf[3], msg[0].buf, msg[0].len); 358 } else { 359 buf[1] = msg[0].addr << 1; 360 buf[3] = 0x00; /* reg addr MSB */ 361 buf[4] = 0x00; /* reg addr LSB */ 362 363 /* Keep prev behavior for write req len > 2*/ 364 if (msg[0].len > 2) { 365 buf[2] = 0x00; /* reg addr len */ 366 memcpy(&buf[5], msg[0].buf, msg[0].len); 367 368 /* Use reg addr fields if write req len <= 2 */ 369 } else { 370 req.wlen = 5; 371 buf[2] = msg[0].len; 372 if (msg[0].len == 2) { 373 buf[3] = msg[0].buf[0]; 374 buf[4] = msg[0].buf[1]; 375 } else if (msg[0].len == 1) { 376 buf[4] = msg[0].buf[0]; 377 } 378 } 379 } 380 ret = af9035_ctrl_msg(d, &req); 381 } 382 } else if (AF9035_IS_I2C_XFER_WRITE(msg, num)) { 383 if (msg[0].len > 40) { 384 /* TODO: correct limits > 40 */ 385 ret = -EOPNOTSUPP; 386 } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || 387 (msg[0].addr == state->af9033_i2c_addr[1])) { 388 if (msg[0].len < 3) { 389 ret = -EOPNOTSUPP; 390 goto unlock; 391 } 392 /* demod access via firmware interface */ 393 u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | 394 msg[0].buf[2]; 395 396 if (msg[0].addr == state->af9033_i2c_addr[1]) 397 reg |= 0x100000; 398 399 ret = af9035_wr_regs(d, reg, &msg[0].buf[3], msg[0].len - 3); 400 } else { 401 /* I2C write */ 402 u8 buf[MAX_XFER_SIZE]; 403 struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len, 404 buf, 0, NULL }; 405 406 if (state->chip_type == 0x9306) { 407 req.cmd = CMD_GENERIC_I2C_WR; 408 req.wlen = 3 + msg[0].len; 409 } 410 411 req.mbox |= ((msg[0].addr & 0x80) >> 3); 412 buf[0] = msg[0].len; 413 if (state->chip_type == 0x9306) { 414 buf[1] = 0x03; /* I2C bus */ 415 buf[2] = msg[0].addr << 1; 416 memcpy(&buf[3], msg[0].buf, msg[0].len); 417 } else { 418 buf[1] = msg[0].addr << 1; 419 buf[2] = 0x00; /* reg addr len */ 420 buf[3] = 0x00; /* reg addr MSB */ 421 buf[4] = 0x00; /* reg addr LSB */ 422 memcpy(&buf[5], msg[0].buf, msg[0].len); 423 } 424 ret = af9035_ctrl_msg(d, &req); 425 } 426 } else if (AF9035_IS_I2C_XFER_READ(msg, num)) { 427 if (msg[0].len > 40) { 428 /* TODO: correct limits > 40 */ 429 ret = -EOPNOTSUPP; 430 } else if (state->no_read) { 431 memset(msg[0].buf, 0, msg[0].len); 432 ret = 0; 433 } else { 434 /* I2C read */ 435 u8 buf[5]; 436 struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), 437 buf, msg[0].len, msg[0].buf }; 438 439 if (state->chip_type == 0x9306) { 440 req.cmd = CMD_GENERIC_I2C_RD; 441 req.wlen = 3; 442 } 443 req.mbox |= ((msg[0].addr & 0x80) >> 3); 444 buf[0] = msg[0].len; 445 if (state->chip_type == 0x9306) { 446 buf[1] = 0x03; /* I2C bus */ 447 buf[2] = msg[0].addr << 1; 448 } else { 449 buf[1] = msg[0].addr << 1; 450 buf[2] = 0x00; /* reg addr len */ 451 buf[3] = 0x00; /* reg addr MSB */ 452 buf[4] = 0x00; /* reg addr LSB */ 453 } 454 ret = af9035_ctrl_msg(d, &req); 455 } 456 } else { 457 /* 458 * We support only three kind of I2C transactions: 459 * 1) 1 x write + 1 x read (repeated start) 460 * 2) 1 x write 461 * 3) 1 x read 462 */ 463 ret = -EOPNOTSUPP; 464 } 465 466 unlock: 467 mutex_unlock(&d->i2c_mutex); 468 469 if (ret < 0) 470 return ret; 471 else 472 return num; 473 } 474 475 static u32 af9035_i2c_functionality(struct i2c_adapter *adapter) 476 { 477 return I2C_FUNC_I2C; 478 } 479 480 static struct i2c_algorithm af9035_i2c_algo = { 481 .master_xfer = af9035_i2c_master_xfer, 482 .functionality = af9035_i2c_functionality, 483 }; 484 485 static int af9035_identify_state(struct dvb_usb_device *d, const char **name) 486 { 487 struct state *state = d_to_priv(d); 488 struct usb_interface *intf = d->intf; 489 int ret, i, ts_mode_invalid; 490 unsigned int utmp, eeprom_addr; 491 u8 tmp; 492 u8 wbuf[1] = { 1 }; 493 u8 rbuf[4]; 494 struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf, 495 sizeof(rbuf), rbuf }; 496 497 ret = af9035_rd_regs(d, 0x1222, rbuf, 3); 498 if (ret < 0) 499 goto err; 500 501 state->chip_version = rbuf[0]; 502 state->chip_type = rbuf[2] << 8 | rbuf[1] << 0; 503 504 ret = af9035_rd_reg(d, 0x384f, &state->prechip_version); 505 if (ret < 0) 506 goto err; 507 508 dev_info(&intf->dev, "prechip_version=%02x chip_version=%02x chip_type=%04x\n", 509 state->prechip_version, state->chip_version, state->chip_type); 510 511 if (state->chip_type == 0x9135) { 512 if (state->chip_version == 0x02) { 513 *name = AF9035_FIRMWARE_IT9135_V2; 514 utmp = 0x00461d; 515 } else { 516 *name = AF9035_FIRMWARE_IT9135_V1; 517 utmp = 0x00461b; 518 } 519 520 /* Check if eeprom exists */ 521 ret = af9035_rd_reg(d, utmp, &tmp); 522 if (ret < 0) 523 goto err; 524 525 if (tmp == 0x00) { 526 dev_dbg(&intf->dev, "no eeprom\n"); 527 state->no_eeprom = true; 528 goto check_firmware_status; 529 } 530 531 eeprom_addr = EEPROM_BASE_IT9135; 532 } else if (state->chip_type == 0x9306) { 533 *name = AF9035_FIRMWARE_IT9303; 534 state->no_eeprom = true; 535 goto check_firmware_status; 536 } else { 537 *name = AF9035_FIRMWARE_AF9035; 538 eeprom_addr = EEPROM_BASE_AF9035; 539 } 540 541 /* Read and store eeprom */ 542 for (i = 0; i < 256; i += 32) { 543 ret = af9035_rd_regs(d, eeprom_addr + i, &state->eeprom[i], 32); 544 if (ret < 0) 545 goto err; 546 } 547 548 dev_dbg(&intf->dev, "eeprom dump:\n"); 549 for (i = 0; i < 256; i += 16) 550 dev_dbg(&intf->dev, "%*ph\n", 16, &state->eeprom[i]); 551 552 /* check for dual tuner mode */ 553 tmp = state->eeprom[EEPROM_TS_MODE]; 554 ts_mode_invalid = 0; 555 switch (tmp) { 556 case 0: 557 break; 558 case 1: 559 case 3: 560 state->dual_mode = true; 561 break; 562 case 5: 563 if (state->chip_type != 0x9135 && state->chip_type != 0x9306) 564 state->dual_mode = true; /* AF9035 */ 565 else 566 ts_mode_invalid = 1; 567 break; 568 default: 569 ts_mode_invalid = 1; 570 } 571 572 dev_dbg(&intf->dev, "ts mode=%d dual mode=%d\n", tmp, state->dual_mode); 573 574 if (ts_mode_invalid) 575 dev_info(&intf->dev, "ts mode=%d not supported, defaulting to single tuner mode!", tmp); 576 577 check_firmware_status: 578 ret = af9035_ctrl_msg(d, &req); 579 if (ret < 0) 580 goto err; 581 582 dev_dbg(&intf->dev, "reply=%*ph\n", 4, rbuf); 583 if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3]) 584 ret = WARM; 585 else 586 ret = COLD; 587 588 return ret; 589 590 err: 591 dev_dbg(&intf->dev, "failed=%d\n", ret); 592 593 return ret; 594 } 595 596 static int af9035_download_firmware_old(struct dvb_usb_device *d, 597 const struct firmware *fw) 598 { 599 struct usb_interface *intf = d->intf; 600 int ret, i, j, len; 601 u8 wbuf[1]; 602 struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; 603 struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL }; 604 u8 hdr_core; 605 u16 hdr_addr, hdr_data_len, hdr_checksum; 606 #define MAX_DATA 58 607 #define HDR_SIZE 7 608 609 /* 610 * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info! 611 * 612 * byte 0: MCS 51 core 613 * There are two inside the AF9035 (1=Link and 2=OFDM) with separate 614 * address spaces 615 * byte 1-2: Big endian destination address 616 * byte 3-4: Big endian number of data bytes following the header 617 * byte 5-6: Big endian header checksum, apparently ignored by the chip 618 * Calculated as ~(h[0]*256+h[1]+h[2]*256+h[3]+h[4]*256) 619 */ 620 621 for (i = fw->size; i > HDR_SIZE;) { 622 hdr_core = fw->data[fw->size - i + 0]; 623 hdr_addr = fw->data[fw->size - i + 1] << 8; 624 hdr_addr |= fw->data[fw->size - i + 2] << 0; 625 hdr_data_len = fw->data[fw->size - i + 3] << 8; 626 hdr_data_len |= fw->data[fw->size - i + 4] << 0; 627 hdr_checksum = fw->data[fw->size - i + 5] << 8; 628 hdr_checksum |= fw->data[fw->size - i + 6] << 0; 629 630 dev_dbg(&intf->dev, "core=%d addr=%04x data_len=%d checksum=%04x\n", 631 hdr_core, hdr_addr, hdr_data_len, hdr_checksum); 632 633 if (((hdr_core != 1) && (hdr_core != 2)) || 634 (hdr_data_len > i)) { 635 dev_dbg(&intf->dev, "bad firmware\n"); 636 break; 637 } 638 639 /* download begin packet */ 640 req.cmd = CMD_FW_DL_BEGIN; 641 ret = af9035_ctrl_msg(d, &req); 642 if (ret < 0) 643 goto err; 644 645 /* download firmware packet(s) */ 646 for (j = HDR_SIZE + hdr_data_len; j > 0; j -= MAX_DATA) { 647 len = j; 648 if (len > MAX_DATA) 649 len = MAX_DATA; 650 req_fw_dl.wlen = len; 651 req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i + 652 HDR_SIZE + hdr_data_len - j]; 653 ret = af9035_ctrl_msg(d, &req_fw_dl); 654 if (ret < 0) 655 goto err; 656 } 657 658 /* download end packet */ 659 req.cmd = CMD_FW_DL_END; 660 ret = af9035_ctrl_msg(d, &req); 661 if (ret < 0) 662 goto err; 663 664 i -= hdr_data_len + HDR_SIZE; 665 666 dev_dbg(&intf->dev, "data uploaded=%zu\n", fw->size - i); 667 } 668 669 /* print warn if firmware is bad, continue and see what happens */ 670 if (i) 671 dev_warn(&intf->dev, "bad firmware\n"); 672 673 return 0; 674 675 err: 676 dev_dbg(&intf->dev, "failed=%d\n", ret); 677 678 return ret; 679 } 680 681 static int af9035_download_firmware_new(struct dvb_usb_device *d, 682 const struct firmware *fw) 683 { 684 struct usb_interface *intf = d->intf; 685 int ret, i, i_prev; 686 struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL }; 687 #define HDR_SIZE 7 688 689 /* 690 * There seems to be following firmware header. Meaning of bytes 0-3 691 * is unknown. 692 * 693 * 0: 3 694 * 1: 0, 1 695 * 2: 0 696 * 3: 1, 2, 3 697 * 4: addr MSB 698 * 5: addr LSB 699 * 6: count of data bytes ? 700 */ 701 for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) { 702 if (i == fw->size || 703 (fw->data[i + 0] == 0x03 && 704 (fw->data[i + 1] == 0x00 || 705 fw->data[i + 1] == 0x01) && 706 fw->data[i + 2] == 0x00)) { 707 req_fw_dl.wlen = i - i_prev; 708 req_fw_dl.wbuf = (u8 *) &fw->data[i_prev]; 709 i_prev = i; 710 ret = af9035_ctrl_msg(d, &req_fw_dl); 711 if (ret < 0) 712 goto err; 713 714 dev_dbg(&intf->dev, "data uploaded=%d\n", i); 715 } 716 } 717 718 return 0; 719 720 err: 721 dev_dbg(&intf->dev, "failed=%d\n", ret); 722 723 return ret; 724 } 725 726 static int af9035_download_firmware(struct dvb_usb_device *d, 727 const struct firmware *fw) 728 { 729 struct usb_interface *intf = d->intf; 730 struct state *state = d_to_priv(d); 731 int ret; 732 u8 wbuf[1]; 733 u8 rbuf[4]; 734 u8 tmp; 735 struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; 736 struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf }; 737 738 dev_dbg(&intf->dev, "\n"); 739 740 /* 741 * In case of dual tuner configuration we need to do some extra 742 * initialization in order to download firmware to slave demod too, 743 * which is done by master demod. 744 * Master feeds also clock and controls power via GPIO. 745 */ 746 if (state->dual_mode) { 747 /* configure gpioh1, reset & power slave demod */ 748 ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); 749 if (ret < 0) 750 goto err; 751 752 ret = af9035_wr_reg_mask(d, 0x00d8b1, 0x01, 0x01); 753 if (ret < 0) 754 goto err; 755 756 ret = af9035_wr_reg_mask(d, 0x00d8af, 0x00, 0x01); 757 if (ret < 0) 758 goto err; 759 760 usleep_range(10000, 50000); 761 762 ret = af9035_wr_reg_mask(d, 0x00d8af, 0x01, 0x01); 763 if (ret < 0) 764 goto err; 765 766 /* tell the slave I2C address */ 767 tmp = state->eeprom[EEPROM_2ND_DEMOD_ADDR]; 768 769 /* Use default I2C address if eeprom has no address set */ 770 if (!tmp) 771 tmp = 0x1d << 1; /* 8-bit format used by chip */ 772 773 if ((state->chip_type == 0x9135) || 774 (state->chip_type == 0x9306)) { 775 ret = af9035_wr_reg(d, 0x004bfb, tmp); 776 if (ret < 0) 777 goto err; 778 } else { 779 ret = af9035_wr_reg(d, 0x00417f, tmp); 780 if (ret < 0) 781 goto err; 782 783 /* enable clock out */ 784 ret = af9035_wr_reg_mask(d, 0x00d81a, 0x01, 0x01); 785 if (ret < 0) 786 goto err; 787 } 788 } 789 790 if (fw->data[0] == 0x01) 791 ret = af9035_download_firmware_old(d, fw); 792 else 793 ret = af9035_download_firmware_new(d, fw); 794 if (ret < 0) 795 goto err; 796 797 /* firmware loaded, request boot */ 798 req.cmd = CMD_FW_BOOT; 799 ret = af9035_ctrl_msg(d, &req); 800 if (ret < 0) 801 goto err; 802 803 /* ensure firmware starts */ 804 wbuf[0] = 1; 805 ret = af9035_ctrl_msg(d, &req_fw_ver); 806 if (ret < 0) 807 goto err; 808 809 if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { 810 dev_err(&intf->dev, "firmware did not run\n"); 811 ret = -ENODEV; 812 goto err; 813 } 814 815 dev_info(&intf->dev, "firmware version=%d.%d.%d.%d", 816 rbuf[0], rbuf[1], rbuf[2], rbuf[3]); 817 818 return 0; 819 820 err: 821 dev_dbg(&intf->dev, "failed=%d\n", ret); 822 823 return ret; 824 } 825 826 static int af9035_read_config(struct dvb_usb_device *d) 827 { 828 struct usb_interface *intf = d->intf; 829 struct state *state = d_to_priv(d); 830 int ret, i; 831 u8 tmp; 832 u16 tmp16; 833 834 /* Demod I2C address */ 835 state->af9033_i2c_addr[0] = 0x1c; 836 state->af9033_i2c_addr[1] = 0x1d; 837 state->af9033_config[0].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; 838 state->af9033_config[1].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; 839 state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; 840 state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; 841 state->it930x_addresses = 0; 842 843 if (state->chip_type == 0x9135) { 844 /* feed clock for integrated RF tuner */ 845 state->af9033_config[0].dyn0_clk = true; 846 state->af9033_config[1].dyn0_clk = true; 847 848 if (state->chip_version == 0x02) { 849 state->af9033_config[0].tuner = AF9033_TUNER_IT9135_60; 850 state->af9033_config[1].tuner = AF9033_TUNER_IT9135_60; 851 } else { 852 state->af9033_config[0].tuner = AF9033_TUNER_IT9135_38; 853 state->af9033_config[1].tuner = AF9033_TUNER_IT9135_38; 854 } 855 856 if (state->no_eeprom) { 857 /* Remote controller to NEC polling by default */ 858 state->ir_mode = 0x05; 859 state->ir_type = 0x00; 860 861 goto skip_eeprom; 862 } 863 } else if (state->chip_type == 0x9306) { 864 /* 865 * IT930x is an USB bridge, only single demod-single tuner 866 * configurations seen so far. 867 */ 868 if ((le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA) && 869 (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_TD310)) { 870 state->it930x_addresses = 1; 871 /* TD310 RC works with NEC defaults */ 872 state->ir_mode = 0x05; 873 state->ir_type = 0x00; 874 } 875 return 0; 876 } 877 878 /* Remote controller */ 879 state->ir_mode = state->eeprom[EEPROM_IR_MODE]; 880 state->ir_type = state->eeprom[EEPROM_IR_TYPE]; 881 882 if (state->dual_mode) { 883 /* Read 2nd demodulator I2C address. 8-bit format on eeprom */ 884 tmp = state->eeprom[EEPROM_2ND_DEMOD_ADDR]; 885 if (tmp) 886 state->af9033_i2c_addr[1] = tmp >> 1; 887 888 dev_dbg(&intf->dev, "2nd demod I2C addr=%02x\n", 889 state->af9033_i2c_addr[1]); 890 } 891 892 for (i = 0; i < state->dual_mode + 1; i++) { 893 unsigned int eeprom_offset = 0; 894 895 /* tuner */ 896 tmp = state->eeprom[EEPROM_1_TUNER_ID + eeprom_offset]; 897 dev_dbg(&intf->dev, "[%d]tuner=%02x\n", i, tmp); 898 899 /* tuner sanity check */ 900 if (state->chip_type == 0x9135) { 901 if (state->chip_version == 0x02) { 902 /* IT9135 BX (v2) */ 903 switch (tmp) { 904 case AF9033_TUNER_IT9135_60: 905 case AF9033_TUNER_IT9135_61: 906 case AF9033_TUNER_IT9135_62: 907 state->af9033_config[i].tuner = tmp; 908 break; 909 } 910 } else { 911 /* IT9135 AX (v1) */ 912 switch (tmp) { 913 case AF9033_TUNER_IT9135_38: 914 case AF9033_TUNER_IT9135_51: 915 case AF9033_TUNER_IT9135_52: 916 state->af9033_config[i].tuner = tmp; 917 break; 918 } 919 } 920 } else { 921 /* AF9035 */ 922 state->af9033_config[i].tuner = tmp; 923 } 924 925 if (state->af9033_config[i].tuner != tmp) { 926 dev_info(&intf->dev, "[%d] overriding tuner from %02x to %02x\n", 927 i, tmp, state->af9033_config[i].tuner); 928 } 929 930 switch (state->af9033_config[i].tuner) { 931 case AF9033_TUNER_TUA9001: 932 case AF9033_TUNER_FC0011: 933 case AF9033_TUNER_MXL5007T: 934 case AF9033_TUNER_TDA18218: 935 case AF9033_TUNER_FC2580: 936 case AF9033_TUNER_FC0012: 937 state->af9033_config[i].spec_inv = 1; 938 break; 939 case AF9033_TUNER_IT9135_38: 940 case AF9033_TUNER_IT9135_51: 941 case AF9033_TUNER_IT9135_52: 942 case AF9033_TUNER_IT9135_60: 943 case AF9033_TUNER_IT9135_61: 944 case AF9033_TUNER_IT9135_62: 945 break; 946 default: 947 dev_warn(&intf->dev, "tuner id=%02x not supported, please report!", 948 tmp); 949 } 950 951 /* disable dual mode if driver does not support it */ 952 if (i == 1) 953 switch (state->af9033_config[i].tuner) { 954 case AF9033_TUNER_FC0012: 955 case AF9033_TUNER_IT9135_38: 956 case AF9033_TUNER_IT9135_51: 957 case AF9033_TUNER_IT9135_52: 958 case AF9033_TUNER_IT9135_60: 959 case AF9033_TUNER_IT9135_61: 960 case AF9033_TUNER_IT9135_62: 961 case AF9033_TUNER_MXL5007T: 962 break; 963 default: 964 state->dual_mode = false; 965 dev_info(&intf->dev, "driver does not support 2nd tuner and will disable it"); 966 } 967 968 /* tuner IF frequency */ 969 tmp = state->eeprom[EEPROM_1_IF_L + eeprom_offset]; 970 tmp16 = tmp << 0; 971 tmp = state->eeprom[EEPROM_1_IF_H + eeprom_offset]; 972 tmp16 |= tmp << 8; 973 dev_dbg(&intf->dev, "[%d]IF=%d\n", i, tmp16); 974 975 eeprom_offset += 0x10; /* shift for the 2nd tuner params */ 976 } 977 978 skip_eeprom: 979 /* get demod clock */ 980 ret = af9035_rd_reg(d, 0x00d800, &tmp); 981 if (ret < 0) 982 goto err; 983 984 tmp = (tmp >> 0) & 0x0f; 985 986 for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) { 987 if (state->chip_type == 0x9135) 988 state->af9033_config[i].clock = clock_lut_it9135[tmp]; 989 else 990 state->af9033_config[i].clock = clock_lut_af9035[tmp]; 991 } 992 993 state->no_read = false; 994 /* Some MXL5007T devices cannot properly handle tuner I2C read ops. */ 995 if (state->af9033_config[0].tuner == AF9033_TUNER_MXL5007T && 996 le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA) 997 998 switch (le16_to_cpu(d->udev->descriptor.idProduct)) { 999 case USB_PID_AVERMEDIA_A867: 1000 case USB_PID_AVERMEDIA_TWINSTAR: 1001 dev_info(&intf->dev, 1002 "Device may have issues with I2C read operations. Enabling fix.\n"); 1003 state->no_read = true; 1004 break; 1005 } 1006 1007 return 0; 1008 1009 err: 1010 dev_dbg(&intf->dev, "failed=%d\n", ret); 1011 1012 return ret; 1013 } 1014 1015 static int af9035_tua9001_tuner_callback(struct dvb_usb_device *d, 1016 int cmd, int arg) 1017 { 1018 struct usb_interface *intf = d->intf; 1019 int ret; 1020 u8 val; 1021 1022 dev_dbg(&intf->dev, "cmd=%d arg=%d\n", cmd, arg); 1023 1024 /* 1025 * CEN always enabled by hardware wiring 1026 * RESETN GPIOT3 1027 * RXEN GPIOT2 1028 */ 1029 1030 switch (cmd) { 1031 case TUA9001_CMD_RESETN: 1032 if (arg) 1033 val = 0x00; 1034 else 1035 val = 0x01; 1036 1037 ret = af9035_wr_reg_mask(d, 0x00d8e7, val, 0x01); 1038 if (ret < 0) 1039 goto err; 1040 break; 1041 case TUA9001_CMD_RXEN: 1042 if (arg) 1043 val = 0x01; 1044 else 1045 val = 0x00; 1046 1047 ret = af9035_wr_reg_mask(d, 0x00d8eb, val, 0x01); 1048 if (ret < 0) 1049 goto err; 1050 break; 1051 } 1052 1053 return 0; 1054 1055 err: 1056 dev_dbg(&intf->dev, "failed=%d\n", ret); 1057 1058 return ret; 1059 } 1060 1061 1062 static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d, 1063 int cmd, int arg) 1064 { 1065 struct usb_interface *intf = d->intf; 1066 int ret; 1067 1068 switch (cmd) { 1069 case FC0011_FE_CALLBACK_POWER: 1070 /* Tuner enable */ 1071 ret = af9035_wr_reg_mask(d, 0xd8eb, 1, 1); 1072 if (ret < 0) 1073 goto err; 1074 1075 ret = af9035_wr_reg_mask(d, 0xd8ec, 1, 1); 1076 if (ret < 0) 1077 goto err; 1078 1079 ret = af9035_wr_reg_mask(d, 0xd8ed, 1, 1); 1080 if (ret < 0) 1081 goto err; 1082 1083 /* LED */ 1084 ret = af9035_wr_reg_mask(d, 0xd8d0, 1, 1); 1085 if (ret < 0) 1086 goto err; 1087 1088 ret = af9035_wr_reg_mask(d, 0xd8d1, 1, 1); 1089 if (ret < 0) 1090 goto err; 1091 1092 usleep_range(10000, 50000); 1093 break; 1094 case FC0011_FE_CALLBACK_RESET: 1095 ret = af9035_wr_reg(d, 0xd8e9, 1); 1096 if (ret < 0) 1097 goto err; 1098 1099 ret = af9035_wr_reg(d, 0xd8e8, 1); 1100 if (ret < 0) 1101 goto err; 1102 1103 ret = af9035_wr_reg(d, 0xd8e7, 1); 1104 if (ret < 0) 1105 goto err; 1106 1107 usleep_range(10000, 20000); 1108 1109 ret = af9035_wr_reg(d, 0xd8e7, 0); 1110 if (ret < 0) 1111 goto err; 1112 1113 usleep_range(10000, 20000); 1114 break; 1115 default: 1116 ret = -EINVAL; 1117 goto err; 1118 } 1119 1120 return 0; 1121 1122 err: 1123 dev_dbg(&intf->dev, "failed=%d\n", ret); 1124 1125 return ret; 1126 } 1127 1128 static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) 1129 { 1130 struct state *state = d_to_priv(d); 1131 1132 switch (state->af9033_config[0].tuner) { 1133 case AF9033_TUNER_FC0011: 1134 return af9035_fc0011_tuner_callback(d, cmd, arg); 1135 case AF9033_TUNER_TUA9001: 1136 return af9035_tua9001_tuner_callback(d, cmd, arg); 1137 default: 1138 break; 1139 } 1140 1141 return 0; 1142 } 1143 1144 static int af9035_frontend_callback(void *adapter_priv, int component, 1145 int cmd, int arg) 1146 { 1147 struct i2c_adapter *adap = adapter_priv; 1148 struct dvb_usb_device *d = i2c_get_adapdata(adap); 1149 struct usb_interface *intf = d->intf; 1150 1151 dev_dbg(&intf->dev, "component=%d cmd=%d arg=%d\n", 1152 component, cmd, arg); 1153 1154 switch (component) { 1155 case DVB_FRONTEND_COMPONENT_TUNER: 1156 return af9035_tuner_callback(d, cmd, arg); 1157 default: 1158 break; 1159 } 1160 1161 return 0; 1162 } 1163 1164 static int af9035_get_adapter_count(struct dvb_usb_device *d) 1165 { 1166 struct state *state = d_to_priv(d); 1167 1168 return state->dual_mode + 1; 1169 } 1170 1171 static int af9035_frontend_attach(struct dvb_usb_adapter *adap) 1172 { 1173 struct state *state = adap_to_priv(adap); 1174 struct dvb_usb_device *d = adap_to_d(adap); 1175 struct usb_interface *intf = d->intf; 1176 int ret; 1177 1178 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1179 1180 if (!state->af9033_config[adap->id].tuner) { 1181 /* unsupported tuner */ 1182 ret = -ENODEV; 1183 goto err; 1184 } 1185 1186 state->af9033_config[adap->id].fe = &adap->fe[0]; 1187 state->af9033_config[adap->id].ops = &state->ops; 1188 ret = af9035_add_i2c_dev(d, "af9033", state->af9033_i2c_addr[adap->id], 1189 &state->af9033_config[adap->id], &d->i2c_adap); 1190 if (ret) 1191 goto err; 1192 1193 if (adap->fe[0] == NULL) { 1194 ret = -ENODEV; 1195 goto err; 1196 } 1197 1198 /* disable I2C-gate */ 1199 adap->fe[0]->ops.i2c_gate_ctrl = NULL; 1200 adap->fe[0]->callback = af9035_frontend_callback; 1201 1202 return 0; 1203 1204 err: 1205 dev_dbg(&intf->dev, "failed=%d\n", ret); 1206 1207 return ret; 1208 } 1209 1210 /* 1211 * The I2C speed register is calculated with: 1212 * I2C speed register = (1000000000 / (24.4 * 16 * I2C_speed)) 1213 * 1214 * The default speed register for it930x is 7, with means a 1215 * speed of ~366 kbps 1216 */ 1217 #define I2C_SPEED_366K 7 1218 1219 static int it930x_frontend_attach(struct dvb_usb_adapter *adap) 1220 { 1221 struct state *state = adap_to_priv(adap); 1222 struct dvb_usb_device *d = adap_to_d(adap); 1223 struct usb_interface *intf = d->intf; 1224 int ret; 1225 struct si2168_config si2168_config; 1226 struct i2c_adapter *adapter; 1227 1228 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1229 1230 /* I2C master bus 2 clock speed 366k */ 1231 ret = af9035_wr_reg(d, 0x00f6a7, I2C_SPEED_366K); 1232 if (ret < 0) 1233 goto err; 1234 1235 /* I2C master bus 1,3 clock speed 366k */ 1236 ret = af9035_wr_reg(d, 0x00f103, I2C_SPEED_366K); 1237 if (ret < 0) 1238 goto err; 1239 1240 /* set gpio11 low */ 1241 ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01); 1242 if (ret < 0) 1243 goto err; 1244 1245 ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01); 1246 if (ret < 0) 1247 goto err; 1248 1249 ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01); 1250 if (ret < 0) 1251 goto err; 1252 1253 /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */ 1254 ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01); 1255 if (ret < 0) 1256 goto err; 1257 1258 ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01); 1259 if (ret < 0) 1260 goto err; 1261 1262 ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01); 1263 if (ret < 0) 1264 goto err; 1265 1266 msleep(200); 1267 1268 ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01); 1269 if (ret < 0) 1270 goto err; 1271 1272 memset(&si2168_config, 0, sizeof(si2168_config)); 1273 si2168_config.i2c_adapter = &adapter; 1274 si2168_config.fe = &adap->fe[0]; 1275 si2168_config.ts_mode = SI2168_TS_SERIAL; 1276 1277 state->af9033_config[adap->id].fe = &adap->fe[0]; 1278 state->af9033_config[adap->id].ops = &state->ops; 1279 ret = af9035_add_i2c_dev(d, "si2168", 1280 it930x_addresses_table[state->it930x_addresses].frontend_i2c_addr, 1281 &si2168_config, &d->i2c_adap); 1282 if (ret) 1283 goto err; 1284 1285 if (adap->fe[0] == NULL) { 1286 ret = -ENODEV; 1287 goto err; 1288 } 1289 state->i2c_adapter_demod = adapter; 1290 1291 return 0; 1292 1293 err: 1294 dev_dbg(&intf->dev, "failed=%d\n", ret); 1295 1296 return ret; 1297 } 1298 1299 static int af9035_frontend_detach(struct dvb_usb_adapter *adap) 1300 { 1301 struct state *state = adap_to_priv(adap); 1302 struct dvb_usb_device *d = adap_to_d(adap); 1303 struct usb_interface *intf = d->intf; 1304 1305 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1306 1307 if (adap->id == 1) { 1308 if (state->i2c_client[1]) 1309 af9035_del_i2c_dev(d); 1310 } else if (adap->id == 0) { 1311 if (state->i2c_client[0]) 1312 af9035_del_i2c_dev(d); 1313 } 1314 1315 return 0; 1316 } 1317 1318 static const struct fc0011_config af9035_fc0011_config = { 1319 .i2c_address = 0x60, 1320 }; 1321 1322 static struct mxl5007t_config af9035_mxl5007t_config[] = { 1323 { 1324 .xtal_freq_hz = MxL_XTAL_24_MHZ, 1325 .if_freq_hz = MxL_IF_4_57_MHZ, 1326 .invert_if = 0, 1327 .loop_thru_enable = 0, 1328 .clk_out_enable = 0, 1329 .clk_out_amp = MxL_CLKOUT_AMP_0_94V, 1330 }, { 1331 .xtal_freq_hz = MxL_XTAL_24_MHZ, 1332 .if_freq_hz = MxL_IF_4_57_MHZ, 1333 .invert_if = 0, 1334 .loop_thru_enable = 1, 1335 .clk_out_enable = 1, 1336 .clk_out_amp = MxL_CLKOUT_AMP_0_94V, 1337 } 1338 }; 1339 1340 static struct tda18218_config af9035_tda18218_config = { 1341 .i2c_address = 0x60, 1342 .i2c_wr_max = 21, 1343 }; 1344 1345 static const struct fc0012_config af9035_fc0012_config[] = { 1346 { 1347 .i2c_address = 0x63, 1348 .xtal_freq = FC_XTAL_36_MHZ, 1349 .dual_master = true, 1350 .loop_through = true, 1351 .clock_out = true, 1352 }, { 1353 .i2c_address = 0x63 | 0x80, /* I2C bus select hack */ 1354 .xtal_freq = FC_XTAL_36_MHZ, 1355 .dual_master = true, 1356 } 1357 }; 1358 1359 static int af9035_tuner_attach(struct dvb_usb_adapter *adap) 1360 { 1361 struct state *state = adap_to_priv(adap); 1362 struct dvb_usb_device *d = adap_to_d(adap); 1363 struct usb_interface *intf = d->intf; 1364 int ret; 1365 struct dvb_frontend *fe; 1366 struct i2c_msg msg[1]; 1367 u8 tuner_addr; 1368 1369 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1370 1371 /* 1372 * XXX: Hack used in that function: we abuse unused I2C address bit [7] 1373 * to carry info about used I2C bus for dual tuner configuration. 1374 */ 1375 1376 switch (state->af9033_config[adap->id].tuner) { 1377 case AF9033_TUNER_TUA9001: { 1378 struct tua9001_platform_data tua9001_pdata = { 1379 .dvb_frontend = adap->fe[0], 1380 }; 1381 1382 /* 1383 * AF9035 gpiot3 = TUA9001 RESETN 1384 * AF9035 gpiot2 = TUA9001 RXEN 1385 */ 1386 1387 /* configure gpiot2 and gpiot2 as output */ 1388 ret = af9035_wr_reg_mask(d, 0x00d8ec, 0x01, 0x01); 1389 if (ret < 0) 1390 goto err; 1391 1392 ret = af9035_wr_reg_mask(d, 0x00d8ed, 0x01, 0x01); 1393 if (ret < 0) 1394 goto err; 1395 1396 ret = af9035_wr_reg_mask(d, 0x00d8e8, 0x01, 0x01); 1397 if (ret < 0) 1398 goto err; 1399 1400 ret = af9035_wr_reg_mask(d, 0x00d8e9, 0x01, 0x01); 1401 if (ret < 0) 1402 goto err; 1403 1404 /* attach tuner */ 1405 ret = af9035_add_i2c_dev(d, "tua9001", 0x60, &tua9001_pdata, 1406 &d->i2c_adap); 1407 if (ret) 1408 goto err; 1409 1410 fe = adap->fe[0]; 1411 break; 1412 } 1413 case AF9033_TUNER_FC0011: 1414 fe = dvb_attach(fc0011_attach, adap->fe[0], 1415 &d->i2c_adap, &af9035_fc0011_config); 1416 break; 1417 case AF9033_TUNER_MXL5007T: 1418 if (adap->id == 0) { 1419 ret = af9035_wr_reg(d, 0x00d8e0, 1); 1420 if (ret < 0) 1421 goto err; 1422 1423 ret = af9035_wr_reg(d, 0x00d8e1, 1); 1424 if (ret < 0) 1425 goto err; 1426 1427 ret = af9035_wr_reg(d, 0x00d8df, 0); 1428 if (ret < 0) 1429 goto err; 1430 1431 msleep(30); 1432 1433 ret = af9035_wr_reg(d, 0x00d8df, 1); 1434 if (ret < 0) 1435 goto err; 1436 1437 msleep(300); 1438 1439 ret = af9035_wr_reg(d, 0x00d8c0, 1); 1440 if (ret < 0) 1441 goto err; 1442 1443 ret = af9035_wr_reg(d, 0x00d8c1, 1); 1444 if (ret < 0) 1445 goto err; 1446 1447 ret = af9035_wr_reg(d, 0x00d8bf, 0); 1448 if (ret < 0) 1449 goto err; 1450 1451 ret = af9035_wr_reg(d, 0x00d8b4, 1); 1452 if (ret < 0) 1453 goto err; 1454 1455 ret = af9035_wr_reg(d, 0x00d8b5, 1); 1456 if (ret < 0) 1457 goto err; 1458 1459 ret = af9035_wr_reg(d, 0x00d8b3, 1); 1460 if (ret < 0) 1461 goto err; 1462 1463 tuner_addr = 0x60; 1464 } else { 1465 tuner_addr = 0x60 | 0x80; /* I2C bus hack */ 1466 } 1467 1468 /* attach tuner */ 1469 fe = dvb_attach(mxl5007t_attach, adap->fe[0], &d->i2c_adap, 1470 tuner_addr, &af9035_mxl5007t_config[adap->id]); 1471 break; 1472 case AF9033_TUNER_TDA18218: 1473 /* attach tuner */ 1474 fe = dvb_attach(tda18218_attach, adap->fe[0], 1475 &d->i2c_adap, &af9035_tda18218_config); 1476 break; 1477 case AF9033_TUNER_FC2580: { 1478 struct fc2580_platform_data fc2580_pdata = { 1479 .dvb_frontend = adap->fe[0], 1480 }; 1481 1482 /* Tuner enable using gpiot2_o, gpiot2_en and gpiot2_on */ 1483 ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); 1484 if (ret < 0) 1485 goto err; 1486 1487 ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); 1488 if (ret < 0) 1489 goto err; 1490 1491 ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); 1492 if (ret < 0) 1493 goto err; 1494 1495 usleep_range(10000, 50000); 1496 /* attach tuner */ 1497 ret = af9035_add_i2c_dev(d, "fc2580", 0x56, &fc2580_pdata, 1498 &d->i2c_adap); 1499 if (ret) 1500 goto err; 1501 1502 fe = adap->fe[0]; 1503 break; 1504 } 1505 case AF9033_TUNER_FC0012: 1506 /* 1507 * AF9035 gpiot2 = FC0012 enable 1508 * XXX: there seems to be something on gpioh8 too, but on my 1509 * test I didn't find any difference. 1510 */ 1511 1512 if (adap->id == 0) { 1513 /* configure gpiot2 as output and high */ 1514 ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); 1515 if (ret < 0) 1516 goto err; 1517 1518 ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); 1519 if (ret < 0) 1520 goto err; 1521 1522 ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); 1523 if (ret < 0) 1524 goto err; 1525 } else { 1526 /* 1527 * FIXME: That belongs for the FC0012 driver. 1528 * Write 02 to FC0012 master tuner register 0d directly 1529 * in order to make slave tuner working. 1530 */ 1531 msg[0].addr = 0x63; 1532 msg[0].flags = 0; 1533 msg[0].len = 2; 1534 msg[0].buf = "\x0d\x02"; 1535 ret = i2c_transfer(&d->i2c_adap, msg, 1); 1536 if (ret < 0) 1537 goto err; 1538 } 1539 1540 usleep_range(10000, 50000); 1541 1542 fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap, 1543 &af9035_fc0012_config[adap->id]); 1544 break; 1545 case AF9033_TUNER_IT9135_38: 1546 case AF9033_TUNER_IT9135_51: 1547 case AF9033_TUNER_IT9135_52: 1548 case AF9033_TUNER_IT9135_60: 1549 case AF9033_TUNER_IT9135_61: 1550 case AF9033_TUNER_IT9135_62: 1551 { 1552 struct platform_device *pdev; 1553 const char *name; 1554 struct it913x_platform_data it913x_pdata = { 1555 .regmap = state->af9033_config[adap->id].regmap, 1556 .fe = adap->fe[0], 1557 }; 1558 1559 switch (state->af9033_config[adap->id].tuner) { 1560 case AF9033_TUNER_IT9135_38: 1561 case AF9033_TUNER_IT9135_51: 1562 case AF9033_TUNER_IT9135_52: 1563 name = "it9133ax-tuner"; 1564 break; 1565 case AF9033_TUNER_IT9135_60: 1566 case AF9033_TUNER_IT9135_61: 1567 case AF9033_TUNER_IT9135_62: 1568 name = "it9133bx-tuner"; 1569 break; 1570 default: 1571 ret = -ENODEV; 1572 goto err; 1573 } 1574 1575 if (state->dual_mode) { 1576 if (adap->id == 0) 1577 it913x_pdata.role = IT913X_ROLE_DUAL_MASTER; 1578 else 1579 it913x_pdata.role = IT913X_ROLE_DUAL_SLAVE; 1580 } else { 1581 it913x_pdata.role = IT913X_ROLE_SINGLE; 1582 } 1583 1584 request_module("%s", "it913x"); 1585 pdev = platform_device_register_data(&d->intf->dev, name, 1586 PLATFORM_DEVID_AUTO, 1587 &it913x_pdata, 1588 sizeof(it913x_pdata)); 1589 if (IS_ERR(pdev) || !pdev->dev.driver) { 1590 ret = -ENODEV; 1591 goto err; 1592 } 1593 if (!try_module_get(pdev->dev.driver->owner)) { 1594 platform_device_unregister(pdev); 1595 ret = -ENODEV; 1596 goto err; 1597 } 1598 1599 state->platform_device_tuner[adap->id] = pdev; 1600 fe = adap->fe[0]; 1601 break; 1602 } 1603 default: 1604 fe = NULL; 1605 } 1606 1607 if (fe == NULL) { 1608 ret = -ENODEV; 1609 goto err; 1610 } 1611 1612 return 0; 1613 1614 err: 1615 dev_dbg(&intf->dev, "failed=%d\n", ret); 1616 1617 return ret; 1618 } 1619 1620 static int it930x_tuner_attach(struct dvb_usb_adapter *adap) 1621 { 1622 struct state *state = adap_to_priv(adap); 1623 struct dvb_usb_device *d = adap_to_d(adap); 1624 struct usb_interface *intf = d->intf; 1625 int ret; 1626 struct si2157_config si2157_config; 1627 1628 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1629 1630 memset(&si2157_config, 0, sizeof(si2157_config)); 1631 si2157_config.fe = adap->fe[0]; 1632 1633 /* 1634 * HACK: The Logilink VG0022A and TerraTec TC2 Stick have 1635 * a bug: when the si2157 firmware that came with the device 1636 * is replaced by a new one, the I2C transfers to the tuner 1637 * will return just 0xff. 1638 * 1639 * Probably, the vendor firmware has some patch specifically 1640 * designed for this device. So, we can't replace by the 1641 * generic firmware. The right solution would be to extract 1642 * the si2157 firmware from the original driver and ask the 1643 * driver to load the specifically designed firmware, but, 1644 * while we don't have that, the next best solution is to just 1645 * keep the original firmware at the device. 1646 */ 1647 if ((le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_DEXATEK && 1648 le16_to_cpu(d->udev->descriptor.idProduct) == 0x0100) || 1649 (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_TERRATEC && 1650 le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_TERRATEC_CINERGY_TC2_STICK)) 1651 si2157_config.dont_load_firmware = true; 1652 1653 si2157_config.if_port = it930x_addresses_table[state->it930x_addresses].tuner_if_port; 1654 ret = af9035_add_i2c_dev(d, "si2157", 1655 it930x_addresses_table[state->it930x_addresses].tuner_i2c_addr, 1656 &si2157_config, state->i2c_adapter_demod); 1657 if (ret) 1658 goto err; 1659 1660 return 0; 1661 1662 err: 1663 dev_dbg(&intf->dev, "failed=%d\n", ret); 1664 1665 return ret; 1666 } 1667 1668 1669 static int it930x_tuner_detach(struct dvb_usb_adapter *adap) 1670 { 1671 struct state *state = adap_to_priv(adap); 1672 struct dvb_usb_device *d = adap_to_d(adap); 1673 struct usb_interface *intf = d->intf; 1674 1675 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1676 1677 if (adap->id == 1) { 1678 if (state->i2c_client[3]) 1679 af9035_del_i2c_dev(d); 1680 } else if (adap->id == 0) { 1681 if (state->i2c_client[1]) 1682 af9035_del_i2c_dev(d); 1683 } 1684 1685 return 0; 1686 } 1687 1688 1689 static int af9035_tuner_detach(struct dvb_usb_adapter *adap) 1690 { 1691 struct state *state = adap_to_priv(adap); 1692 struct dvb_usb_device *d = adap_to_d(adap); 1693 struct usb_interface *intf = d->intf; 1694 1695 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1696 1697 switch (state->af9033_config[adap->id].tuner) { 1698 case AF9033_TUNER_TUA9001: 1699 case AF9033_TUNER_FC2580: 1700 if (adap->id == 1) { 1701 if (state->i2c_client[3]) 1702 af9035_del_i2c_dev(d); 1703 } else if (adap->id == 0) { 1704 if (state->i2c_client[1]) 1705 af9035_del_i2c_dev(d); 1706 } 1707 break; 1708 case AF9033_TUNER_IT9135_38: 1709 case AF9033_TUNER_IT9135_51: 1710 case AF9033_TUNER_IT9135_52: 1711 case AF9033_TUNER_IT9135_60: 1712 case AF9033_TUNER_IT9135_61: 1713 case AF9033_TUNER_IT9135_62: 1714 { 1715 struct platform_device *pdev; 1716 1717 pdev = state->platform_device_tuner[adap->id]; 1718 if (pdev) { 1719 module_put(pdev->dev.driver->owner); 1720 platform_device_unregister(pdev); 1721 } 1722 break; 1723 } 1724 } 1725 1726 return 0; 1727 } 1728 1729 static int af9035_init(struct dvb_usb_device *d) 1730 { 1731 struct state *state = d_to_priv(d); 1732 struct usb_interface *intf = d->intf; 1733 int ret, i; 1734 u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4; 1735 u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; 1736 struct reg_val_mask tab[] = { 1737 { 0x80f99d, 0x01, 0x01 }, 1738 { 0x80f9a4, 0x01, 0x01 }, 1739 { 0x00dd11, 0x00, 0x20 }, 1740 { 0x00dd11, 0x00, 0x40 }, 1741 { 0x00dd13, 0x00, 0x20 }, 1742 { 0x00dd13, 0x00, 0x40 }, 1743 { 0x00dd11, 0x20, 0x20 }, 1744 { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, 1745 { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, 1746 { 0x00dd0c, packet_size, 0xff}, 1747 { 0x00dd11, state->dual_mode << 6, 0x40 }, 1748 { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, 1749 { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, 1750 { 0x00dd0d, packet_size, 0xff }, 1751 { 0x80f9a3, state->dual_mode, 0x01 }, 1752 { 0x80f9cd, state->dual_mode, 0x01 }, 1753 { 0x80f99d, 0x00, 0x01 }, 1754 { 0x80f9a4, 0x00, 0x01 }, 1755 }; 1756 1757 dev_dbg(&intf->dev, "USB speed=%d frame_size=%04x packet_size=%02x\n", 1758 d->udev->speed, frame_size, packet_size); 1759 1760 /* init endpoints */ 1761 for (i = 0; i < ARRAY_SIZE(tab); i++) { 1762 ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val, 1763 tab[i].mask); 1764 if (ret < 0) 1765 goto err; 1766 } 1767 1768 return 0; 1769 1770 err: 1771 dev_dbg(&intf->dev, "failed=%d\n", ret); 1772 1773 return ret; 1774 } 1775 1776 static int it930x_init(struct dvb_usb_device *d) 1777 { 1778 struct state *state = d_to_priv(d); 1779 struct usb_interface *intf = d->intf; 1780 int ret, i; 1781 u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 816) * 188 / 4; 1782 u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; 1783 struct reg_val_mask tab[] = { 1784 { 0x00da1a, 0x00, 0x01 }, /* ignore_sync_byte */ 1785 { 0x00f41f, 0x04, 0x04 }, /* dvbt_inten */ 1786 { 0x00da10, 0x00, 0x01 }, /* mpeg_full_speed */ 1787 { 0x00f41a, 0x01, 0x01 }, /* dvbt_en */ 1788 { 0x00da1d, 0x01, 0x01 }, /* mp2_sw_rst, reset EP4 */ 1789 { 0x00dd11, 0x00, 0x20 }, /* ep4_tx_en, disable EP4 */ 1790 { 0x00dd13, 0x00, 0x20 }, /* ep4_tx_nak, disable EP4 NAK */ 1791 { 0x00dd11, 0x20, 0x20 }, /* ep4_tx_en, enable EP4 */ 1792 { 0x00dd11, 0x00, 0x40 }, /* ep5_tx_en, disable EP5 */ 1793 { 0x00dd13, 0x00, 0x40 }, /* ep5_tx_nak, disable EP5 NAK */ 1794 { 0x00dd11, state->dual_mode << 6, 0x40 }, /* enable EP5 */ 1795 { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, 1796 { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, 1797 { 0x00dd0c, packet_size, 0xff}, 1798 { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, 1799 { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, 1800 { 0x00dd0d, packet_size, 0xff }, 1801 { 0x00da1d, 0x00, 0x01 }, /* mp2_sw_rst, disable */ 1802 { 0x00d833, 0x01, 0xff }, /* slew rate ctrl: slew rate boosts */ 1803 { 0x00d830, 0x00, 0xff }, /* Bit 0 of output driving control */ 1804 { 0x00d831, 0x01, 0xff }, /* Bit 1 of output driving control */ 1805 { 0x00d832, 0x00, 0xff }, /* Bit 2 of output driving control */ 1806 1807 /* suspend gpio1 for TS-C */ 1808 { 0x00d8b0, 0x01, 0xff }, /* gpio1 */ 1809 { 0x00d8b1, 0x01, 0xff }, /* gpio1 */ 1810 { 0x00d8af, 0x00, 0xff }, /* gpio1 */ 1811 1812 /* suspend gpio7 for TS-D */ 1813 { 0x00d8c4, 0x01, 0xff }, /* gpio7 */ 1814 { 0x00d8c5, 0x01, 0xff }, /* gpio7 */ 1815 { 0x00d8c3, 0x00, 0xff }, /* gpio7 */ 1816 1817 /* suspend gpio13 for TS-B */ 1818 { 0x00d8dc, 0x01, 0xff }, /* gpio13 */ 1819 { 0x00d8dd, 0x01, 0xff }, /* gpio13 */ 1820 { 0x00d8db, 0x00, 0xff }, /* gpio13 */ 1821 1822 /* suspend gpio14 for TS-E */ 1823 { 0x00d8e4, 0x01, 0xff }, /* gpio14 */ 1824 { 0x00d8e5, 0x01, 0xff }, /* gpio14 */ 1825 { 0x00d8e3, 0x00, 0xff }, /* gpio14 */ 1826 1827 /* suspend gpio15 for TS-A */ 1828 { 0x00d8e8, 0x01, 0xff }, /* gpio15 */ 1829 { 0x00d8e9, 0x01, 0xff }, /* gpio15 */ 1830 { 0x00d8e7, 0x00, 0xff }, /* gpio15 */ 1831 1832 { 0x00da58, 0x00, 0x01 }, /* ts_in_src, serial */ 1833 { 0x00da73, 0x01, 0xff }, /* ts0_aggre_mode */ 1834 { 0x00da78, 0x47, 0xff }, /* ts0_sync_byte */ 1835 { 0x00da4c, 0x01, 0xff }, /* ts0_en */ 1836 { 0x00da5a, 0x1f, 0xff }, /* ts_fail_ignore */ 1837 }; 1838 1839 dev_dbg(&intf->dev, "USB speed=%d frame_size=%04x packet_size=%02x\n", 1840 d->udev->speed, frame_size, packet_size); 1841 1842 /* init endpoints */ 1843 for (i = 0; i < ARRAY_SIZE(tab); i++) { 1844 ret = af9035_wr_reg_mask(d, tab[i].reg, 1845 tab[i].val, tab[i].mask); 1846 1847 if (ret < 0) 1848 goto err; 1849 } 1850 1851 return 0; 1852 err: 1853 dev_dbg(&intf->dev, "failed=%d\n", ret); 1854 1855 return ret; 1856 } 1857 1858 1859 #if IS_ENABLED(CONFIG_RC_CORE) 1860 static int af9035_rc_query(struct dvb_usb_device *d) 1861 { 1862 struct usb_interface *intf = d->intf; 1863 int ret; 1864 enum rc_proto proto; 1865 u32 key; 1866 u8 buf[4]; 1867 struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, buf }; 1868 1869 ret = af9035_ctrl_msg(d, &req); 1870 if (ret == 1) 1871 return 0; 1872 else if (ret < 0) 1873 goto err; 1874 1875 if ((buf[2] + buf[3]) == 0xff) { 1876 if ((buf[0] + buf[1]) == 0xff) { 1877 /* NEC standard 16bit */ 1878 key = RC_SCANCODE_NEC(buf[0], buf[2]); 1879 proto = RC_PROTO_NEC; 1880 } else { 1881 /* NEC extended 24bit */ 1882 key = RC_SCANCODE_NECX(buf[0] << 8 | buf[1], buf[2]); 1883 proto = RC_PROTO_NECX; 1884 } 1885 } else { 1886 /* NEC full code 32bit */ 1887 key = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 | 1888 buf[2] << 8 | buf[3]); 1889 proto = RC_PROTO_NEC32; 1890 } 1891 1892 dev_dbg(&intf->dev, "%*ph\n", 4, buf); 1893 1894 rc_keydown(d->rc_dev, proto, key, 0); 1895 1896 return 0; 1897 1898 err: 1899 dev_dbg(&intf->dev, "failed=%d\n", ret); 1900 1901 return ret; 1902 } 1903 1904 static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) 1905 { 1906 struct state *state = d_to_priv(d); 1907 struct usb_interface *intf = d->intf; 1908 1909 dev_dbg(&intf->dev, "ir_mode=%02x ir_type=%02x\n", 1910 state->ir_mode, state->ir_type); 1911 1912 /* don't activate rc if in HID mode or if not available */ 1913 if (state->ir_mode == 0x05) { 1914 switch (state->ir_type) { 1915 case 0: /* NEC */ 1916 default: 1917 rc->allowed_protos = RC_PROTO_BIT_NEC | 1918 RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32; 1919 break; 1920 case 1: /* RC6 */ 1921 rc->allowed_protos = RC_PROTO_BIT_RC6_MCE; 1922 break; 1923 } 1924 1925 rc->query = af9035_rc_query; 1926 rc->interval = 500; 1927 1928 /* load empty to enable rc */ 1929 if (!rc->map_name) 1930 rc->map_name = RC_MAP_EMPTY; 1931 } 1932 1933 return 0; 1934 } 1935 #else 1936 #define af9035_get_rc_config NULL 1937 #endif 1938 1939 static int af9035_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, 1940 struct usb_data_stream_properties *stream) 1941 { 1942 struct dvb_usb_device *d = fe_to_d(fe); 1943 struct usb_interface *intf = d->intf; 1944 1945 dev_dbg(&intf->dev, "adap=%d\n", fe_to_adap(fe)->id); 1946 1947 if (d->udev->speed == USB_SPEED_FULL) 1948 stream->u.bulk.buffersize = 5 * 188; 1949 1950 return 0; 1951 } 1952 1953 static int af9035_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) 1954 { 1955 struct state *state = adap_to_priv(adap); 1956 1957 return state->ops.pid_filter_ctrl(adap->fe[0], onoff); 1958 } 1959 1960 static int af9035_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, 1961 int onoff) 1962 { 1963 struct state *state = adap_to_priv(adap); 1964 1965 return state->ops.pid_filter(adap->fe[0], index, pid, onoff); 1966 } 1967 1968 static int af9035_probe(struct usb_interface *intf, 1969 const struct usb_device_id *id) 1970 { 1971 struct usb_device *udev = interface_to_usbdev(intf); 1972 char manufacturer[sizeof("Afatech")]; 1973 1974 memset(manufacturer, 0, sizeof(manufacturer)); 1975 usb_string(udev, udev->descriptor.iManufacturer, 1976 manufacturer, sizeof(manufacturer)); 1977 /* 1978 * There is two devices having same ID but different chipset. One uses 1979 * AF9015 and the other IT9135 chipset. Only difference seen on lsusb 1980 * is iManufacturer string. 1981 * 1982 * idVendor 0x0ccd TerraTec Electronic GmbH 1983 * idProduct 0x0099 1984 * bcdDevice 2.00 1985 * iManufacturer 1 Afatech 1986 * iProduct 2 DVB-T 2 1987 * 1988 * idVendor 0x0ccd TerraTec Electronic GmbH 1989 * idProduct 0x0099 1990 * bcdDevice 2.00 1991 * iManufacturer 1 ITE Technologies, Inc. 1992 * iProduct 2 DVB-T TV Stick 1993 */ 1994 if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) && 1995 (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) { 1996 if (!strcmp("Afatech", manufacturer)) { 1997 dev_dbg(&udev->dev, "rejecting device\n"); 1998 return -ENODEV; 1999 } 2000 } 2001 2002 return dvb_usbv2_probe(intf, id); 2003 } 2004 2005 /* interface 0 is used by DVB-T receiver and 2006 interface 1 is for remote controller (HID) */ 2007 static const struct dvb_usb_device_properties af9035_props = { 2008 .driver_name = KBUILD_MODNAME, 2009 .owner = THIS_MODULE, 2010 .adapter_nr = adapter_nr, 2011 .size_of_priv = sizeof(struct state), 2012 2013 .generic_bulk_ctrl_endpoint = 0x02, 2014 .generic_bulk_ctrl_endpoint_response = 0x81, 2015 2016 .identify_state = af9035_identify_state, 2017 .download_firmware = af9035_download_firmware, 2018 2019 .i2c_algo = &af9035_i2c_algo, 2020 .read_config = af9035_read_config, 2021 .frontend_attach = af9035_frontend_attach, 2022 .frontend_detach = af9035_frontend_detach, 2023 .tuner_attach = af9035_tuner_attach, 2024 .tuner_detach = af9035_tuner_detach, 2025 .init = af9035_init, 2026 .get_rc_config = af9035_get_rc_config, 2027 .get_stream_config = af9035_get_stream_config, 2028 2029 .get_adapter_count = af9035_get_adapter_count, 2030 .adapter = { 2031 { 2032 .caps = DVB_USB_ADAP_HAS_PID_FILTER | 2033 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 2034 2035 .pid_filter_count = 32, 2036 .pid_filter_ctrl = af9035_pid_filter_ctrl, 2037 .pid_filter = af9035_pid_filter, 2038 2039 .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), 2040 }, { 2041 .caps = DVB_USB_ADAP_HAS_PID_FILTER | 2042 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 2043 2044 .pid_filter_count = 32, 2045 .pid_filter_ctrl = af9035_pid_filter_ctrl, 2046 .pid_filter = af9035_pid_filter, 2047 2048 .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), 2049 }, 2050 }, 2051 }; 2052 2053 static const struct dvb_usb_device_properties it930x_props = { 2054 .driver_name = KBUILD_MODNAME, 2055 .owner = THIS_MODULE, 2056 .adapter_nr = adapter_nr, 2057 .size_of_priv = sizeof(struct state), 2058 2059 .generic_bulk_ctrl_endpoint = 0x02, 2060 .generic_bulk_ctrl_endpoint_response = 0x81, 2061 2062 .identify_state = af9035_identify_state, 2063 .download_firmware = af9035_download_firmware, 2064 2065 .i2c_algo = &af9035_i2c_algo, 2066 .read_config = af9035_read_config, 2067 .frontend_attach = it930x_frontend_attach, 2068 .frontend_detach = af9035_frontend_detach, 2069 .tuner_attach = it930x_tuner_attach, 2070 .tuner_detach = it930x_tuner_detach, 2071 .init = it930x_init, 2072 /* 2073 * dvb_usbv2_remote_init() calls rc_config() only for those devices 2074 * which have non-empty rc_map, so it's safe to enable it for every IT930x 2075 */ 2076 .get_rc_config = af9035_get_rc_config, 2077 .get_stream_config = af9035_get_stream_config, 2078 2079 .get_adapter_count = af9035_get_adapter_count, 2080 .adapter = { 2081 { 2082 .stream = DVB_USB_STREAM_BULK(0x84, 4, 816 * 188), 2083 }, { 2084 .stream = DVB_USB_STREAM_BULK(0x85, 4, 816 * 188), 2085 }, 2086 }, 2087 }; 2088 2089 static const struct usb_device_id af9035_id_table[] = { 2090 /* AF9035 devices */ 2091 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035, 2092 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2093 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000, 2094 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2095 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001, 2096 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2097 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002, 2098 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2099 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003, 2100 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2101 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK, 2102 &af9035_props, "TerraTec Cinergy T Stick", NULL) }, 2103 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835, 2104 &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, 2105 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835, 2106 &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, 2107 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867, 2108 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2109 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867, 2110 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2111 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR, 2112 &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, 2113 { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, 2114 &af9035_props, "Asus U3100Mini Plus", NULL) }, 2115 { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, 2116 &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, 2117 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, 0x0337, 2118 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2119 { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_EVOLVEO_XTRATV_STICK, 2120 &af9035_props, "EVOLVEO XtraTV stick", NULL) }, 2121 2122 /* IT9135 devices */ 2123 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, 2124 &af9035_props, "ITE 9135 Generic", RC_MAP_IT913X_V1) }, 2125 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005, 2126 &af9035_props, "ITE 9135(9005) Generic", RC_MAP_IT913X_V2) }, 2127 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006, 2128 &af9035_props, "ITE 9135(9006) Generic", RC_MAP_IT913X_V1) }, 2129 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_1835, 2130 &af9035_props, "Avermedia A835B(1835)", RC_MAP_IT913X_V2) }, 2131 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_2835, 2132 &af9035_props, "Avermedia A835B(2835)", RC_MAP_IT913X_V2) }, 2133 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_3835, 2134 &af9035_props, "Avermedia A835B(3835)", RC_MAP_IT913X_V2) }, 2135 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_4835, 2136 &af9035_props, "Avermedia A835B(4835)", RC_MAP_IT913X_V2) }, 2137 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD110, 2138 &af9035_props, "Avermedia AverTV Volar HD 2 (TD110)", RC_MAP_AVERMEDIA_RM_KS) }, 2139 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335, 2140 &af9035_props, "Avermedia H335", RC_MAP_IT913X_V2) }, 2141 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09, 2142 &af9035_props, "Kworld UB499-2T T09", RC_MAP_IT913X_V1) }, 2143 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137, 2144 &af9035_props, "Sveon STV22 Dual DVB-T HDTV", 2145 RC_MAP_IT913X_V1) }, 2146 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2, 2147 &af9035_props, "Digital Dual TV Receiver CTVDIGDUAL_V2", 2148 RC_MAP_IT913X_V1) }, 2149 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T1, 2150 &af9035_props, "TerraTec T1", RC_MAP_IT913X_V1) }, 2151 /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ 2152 { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, 2153 &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", 2154 NULL) }, 2155 { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, 2156 &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, 2157 { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900, 2158 &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) }, 2159 { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_78E, 2160 &af9035_props, "PCTV AndroiDTV (78e)", RC_MAP_IT913X_V1) }, 2161 { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_79E, 2162 &af9035_props, "PCTV microStick (79e)", RC_MAP_IT913X_V2) }, 2163 2164 /* IT930x devices */ 2165 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303, 2166 &it930x_props, "ITE 9303 Generic", NULL) }, 2167 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD310, 2168 &it930x_props, "AVerMedia TD310 DVB-T2", RC_MAP_AVERMEDIA_RM_KS) }, 2169 { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100, 2170 &it930x_props, "Logilink VG0022A", NULL) }, 2171 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_TC2_STICK, 2172 &it930x_props, "TerraTec Cinergy TC2 Stick", NULL) }, 2173 { } 2174 }; 2175 MODULE_DEVICE_TABLE(usb, af9035_id_table); 2176 2177 static struct usb_driver af9035_usb_driver = { 2178 .name = KBUILD_MODNAME, 2179 .id_table = af9035_id_table, 2180 .probe = af9035_probe, 2181 .disconnect = dvb_usbv2_disconnect, 2182 .suspend = dvb_usbv2_suspend, 2183 .resume = dvb_usbv2_resume, 2184 .reset_resume = dvb_usbv2_reset_resume, 2185 .no_dynamic_id = 1, 2186 .soft_unbind = 1, 2187 }; 2188 2189 module_usb_driver(af9035_usb_driver); 2190 2191 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 2192 MODULE_DESCRIPTION("Afatech AF9035 driver"); 2193 MODULE_LICENSE("GPL"); 2194 MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035); 2195 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V1); 2196 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V2); 2197 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9303); 2198