xref: /linux/drivers/media/usb/au0828/au0828-dvb.c (revision 93d90ad708b8da6efc0e487b66111aa9db7f70c7)
1 /*
2  *  Driver for the Auvitek USB bridge
3  *
4  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2 of the License, or
9  *  (at your option) any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *
15  *  GNU General Public License for more details.
16  *
17  *  You should have received a copy of the GNU General Public License
18  *  along with this program; if not, write to the Free Software
19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21 
22 #include "au0828.h"
23 
24 #include <linux/module.h>
25 #include <linux/slab.h>
26 #include <linux/init.h>
27 #include <linux/device.h>
28 #include <media/v4l2-common.h>
29 #include <media/tuner.h>
30 
31 #include "au8522.h"
32 #include "xc5000.h"
33 #include "mxl5007t.h"
34 #include "tda18271.h"
35 
36 static int preallocate_big_buffers;
37 module_param_named(preallocate_big_buffers, preallocate_big_buffers, int, 0644);
38 MODULE_PARM_DESC(preallocate_big_buffers, "Preallocate the larger transfer buffers at module load time");
39 
40 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
41 
42 #define _AU0828_BULKPIPE 0x83
43 #define _BULKPIPESIZE 0xe522
44 
45 static u8 hauppauge_hvr950q_led_states[] = {
46 	0x00, /* off */
47 	0x02, /* yellow */
48 	0x04, /* green */
49 };
50 
51 static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
52 	.gpio_output = 0x00e0,
53 	.gpio_output_enable  = 0x6006,
54 	.gpio_output_disable = 0x0660,
55 
56 	.gpio_leds = 0x00e2,
57 	.led_states  = hauppauge_hvr950q_led_states,
58 	.num_led_states = sizeof(hauppauge_hvr950q_led_states),
59 
60 	.vsb8_strong   = 20 /* dB */ * 10,
61 	.qam64_strong  = 25 /* dB */ * 10,
62 	.qam256_strong = 32 /* dB */ * 10,
63 };
64 
65 static struct au8522_config hauppauge_hvr950q_config = {
66 	.demod_address = 0x8e >> 1,
67 	.status_mode   = AU8522_DEMODLOCKING,
68 	.qam_if        = AU8522_IF_6MHZ,
69 	.vsb_if        = AU8522_IF_6MHZ,
70 	.led_cfg       = &hauppauge_hvr950q_led_cfg,
71 };
72 
73 static struct au8522_config fusionhdtv7usb_config = {
74 	.demod_address = 0x8e >> 1,
75 	.status_mode   = AU8522_DEMODLOCKING,
76 	.qam_if        = AU8522_IF_6MHZ,
77 	.vsb_if        = AU8522_IF_6MHZ,
78 };
79 
80 static struct au8522_config hauppauge_woodbury_config = {
81 	.demod_address = 0x8e >> 1,
82 	.status_mode   = AU8522_DEMODLOCKING,
83 	.qam_if        = AU8522_IF_4MHZ,
84 	.vsb_if        = AU8522_IF_3_25MHZ,
85 };
86 
87 static struct xc5000_config hauppauge_xc5000a_config = {
88 	.i2c_address      = 0x61,
89 	.if_khz           = 6000,
90 	.chip_id          = XC5000A,
91 	.output_amp       = 0x8f,
92 };
93 
94 static struct xc5000_config hauppauge_xc5000c_config = {
95 	.i2c_address      = 0x61,
96 	.if_khz           = 6000,
97 	.chip_id          = XC5000C,
98 	.output_amp       = 0x8f,
99 };
100 
101 static struct mxl5007t_config mxl5007t_hvr950q_config = {
102 	.xtal_freq_hz = MxL_XTAL_24_MHZ,
103 	.if_freq_hz = MxL_IF_6_MHZ,
104 };
105 
106 static struct tda18271_config hauppauge_woodbury_tunerconfig = {
107 	.gate    = TDA18271_GATE_DIGITAL,
108 };
109 
110 static void au0828_restart_dvb_streaming(struct work_struct *work);
111 
112 /*-------------------------------------------------------------------*/
113 static void urb_completion(struct urb *purb)
114 {
115 	struct au0828_dev *dev = purb->context;
116 	int ptype = usb_pipetype(purb->pipe);
117 	unsigned char *ptr;
118 
119 	dprintk(2, "%s: %d\n", __func__, purb->actual_length);
120 
121 	if (!dev) {
122 		dprintk(2, "%s: no dev!\n", __func__);
123 		return;
124 	}
125 
126 	if (!dev->urb_streaming) {
127 		dprintk(2, "%s: not streaming!\n", __func__);
128 		return;
129 	}
130 
131 	if (ptype != PIPE_BULK) {
132 		pr_err("%s: Unsupported URB type %d\n",
133 		       __func__, ptype);
134 		return;
135 	}
136 
137 	/* See if the stream is corrupted (to work around a hardware
138 	   bug where the stream gets misaligned */
139 	ptr = purb->transfer_buffer;
140 	if (purb->actual_length > 0 && ptr[0] != 0x47) {
141 		dprintk(1, "Need to restart streaming %02x len=%d!\n",
142 			ptr[0], purb->actual_length);
143 		schedule_work(&dev->restart_streaming);
144 		return;
145 	}
146 
147 	/* Feed the transport payload into the kernel demux */
148 	dvb_dmx_swfilter_packets(&dev->dvb.demux,
149 		purb->transfer_buffer, purb->actual_length / 188);
150 
151 	/* Clean the buffer before we requeue */
152 	memset(purb->transfer_buffer, 0, URB_BUFSIZE);
153 
154 	/* Requeue URB */
155 	usb_submit_urb(purb, GFP_ATOMIC);
156 }
157 
158 static int stop_urb_transfer(struct au0828_dev *dev)
159 {
160 	int i;
161 
162 	dprintk(2, "%s()\n", __func__);
163 
164 	if (!dev->urb_streaming)
165 		return 0;
166 
167 	dev->urb_streaming = false;
168 	for (i = 0; i < URB_COUNT; i++) {
169 		if (dev->urbs[i]) {
170 			usb_kill_urb(dev->urbs[i]);
171 			if (!preallocate_big_buffers)
172 				kfree(dev->urbs[i]->transfer_buffer);
173 
174 			usb_free_urb(dev->urbs[i]);
175 		}
176 	}
177 
178 	return 0;
179 }
180 
181 static int start_urb_transfer(struct au0828_dev *dev)
182 {
183 	struct urb *purb;
184 	int i, ret = -ENOMEM;
185 
186 	dprintk(2, "%s()\n", __func__);
187 
188 	if (dev->urb_streaming) {
189 		dprintk(2, "%s: bulk xfer already running!\n", __func__);
190 		return 0;
191 	}
192 
193 	for (i = 0; i < URB_COUNT; i++) {
194 
195 		dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
196 		if (!dev->urbs[i])
197 			goto err;
198 
199 		purb = dev->urbs[i];
200 
201 		if (preallocate_big_buffers)
202 			purb->transfer_buffer = dev->dig_transfer_buffer[i];
203 		else
204 			purb->transfer_buffer = kzalloc(URB_BUFSIZE,
205 					GFP_KERNEL);
206 
207 		if (!purb->transfer_buffer) {
208 			usb_free_urb(purb);
209 			dev->urbs[i] = NULL;
210 			pr_err("%s: failed big buffer allocation, err = %d\n",
211 			       __func__, ret);
212 			goto err;
213 		}
214 
215 		purb->status = -EINPROGRESS;
216 		usb_fill_bulk_urb(purb,
217 				  dev->usbdev,
218 				  usb_rcvbulkpipe(dev->usbdev,
219 					_AU0828_BULKPIPE),
220 				  purb->transfer_buffer,
221 				  URB_BUFSIZE,
222 				  urb_completion,
223 				  dev);
224 
225 	}
226 
227 	for (i = 0; i < URB_COUNT; i++) {
228 		ret = usb_submit_urb(dev->urbs[i], GFP_ATOMIC);
229 		if (ret != 0) {
230 			stop_urb_transfer(dev);
231 			pr_err("%s: failed urb submission, err = %d\n",
232 			       __func__, ret);
233 			return ret;
234 		}
235 	}
236 
237 	dev->urb_streaming = true;
238 	ret = 0;
239 
240 err:
241 	return ret;
242 }
243 
244 static void au0828_start_transport(struct au0828_dev *dev)
245 {
246 	au0828_write(dev, 0x608, 0x90);
247 	au0828_write(dev, 0x609, 0x72);
248 	au0828_write(dev, 0x60a, 0x71);
249 	au0828_write(dev, 0x60b, 0x01);
250 
251 }
252 
253 static void au0828_stop_transport(struct au0828_dev *dev, int full_stop)
254 {
255 	if (full_stop) {
256 		au0828_write(dev, 0x608, 0x00);
257 		au0828_write(dev, 0x609, 0x00);
258 		au0828_write(dev, 0x60a, 0x00);
259 	}
260 	au0828_write(dev, 0x60b, 0x00);
261 }
262 
263 static int au0828_dvb_start_feed(struct dvb_demux_feed *feed)
264 {
265 	struct dvb_demux *demux = feed->demux;
266 	struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
267 	struct au0828_dvb *dvb = &dev->dvb;
268 	int ret = 0;
269 
270 	dprintk(1, "%s()\n", __func__);
271 
272 	if (!demux->dmx.frontend)
273 		return -EINVAL;
274 
275 	if (dvb->frontend) {
276 		mutex_lock(&dvb->lock);
277 		dvb->start_count++;
278 		dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
279 			dvb->start_count, dvb->stop_count);
280 		if (dvb->feeding++ == 0) {
281 			/* Start transport */
282 			au0828_start_transport(dev);
283 			ret = start_urb_transfer(dev);
284 			if (ret < 0) {
285 				au0828_stop_transport(dev, 0);
286 				dvb->feeding--;	/* We ran out of memory... */
287 			}
288 		}
289 		mutex_unlock(&dvb->lock);
290 	}
291 
292 	return ret;
293 }
294 
295 static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed)
296 {
297 	struct dvb_demux *demux = feed->demux;
298 	struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
299 	struct au0828_dvb *dvb = &dev->dvb;
300 	int ret = 0;
301 
302 	dprintk(1, "%s()\n", __func__);
303 
304 	if (dvb->frontend) {
305 		cancel_work_sync(&dev->restart_streaming);
306 
307 		mutex_lock(&dvb->lock);
308 		dvb->stop_count++;
309 		dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
310 			dvb->start_count, dvb->stop_count);
311 		if (dvb->feeding > 0) {
312 			dvb->feeding--;
313 			if (dvb->feeding == 0) {
314 				/* Stop transport */
315 				ret = stop_urb_transfer(dev);
316 				au0828_stop_transport(dev, 0);
317 			}
318 		}
319 		mutex_unlock(&dvb->lock);
320 	}
321 
322 	return ret;
323 }
324 
325 static void au0828_restart_dvb_streaming(struct work_struct *work)
326 {
327 	struct au0828_dev *dev = container_of(work, struct au0828_dev,
328 					      restart_streaming);
329 	struct au0828_dvb *dvb = &dev->dvb;
330 
331 	if (!dev->urb_streaming)
332 		return;
333 
334 	dprintk(1, "Restarting streaming...!\n");
335 
336 	mutex_lock(&dvb->lock);
337 
338 	/* Stop transport */
339 	stop_urb_transfer(dev);
340 	au0828_stop_transport(dev, 1);
341 
342 	/* Start transport */
343 	au0828_start_transport(dev);
344 	start_urb_transfer(dev);
345 
346 	mutex_unlock(&dvb->lock);
347 }
348 
349 static int au0828_set_frontend(struct dvb_frontend *fe)
350 {
351 	struct au0828_dev *dev = fe->dvb->priv;
352 	struct au0828_dvb *dvb = &dev->dvb;
353 	int ret, was_streaming;
354 
355 	mutex_lock(&dvb->lock);
356 	was_streaming = dev->urb_streaming;
357 	if (was_streaming) {
358 		au0828_stop_transport(dev, 1);
359 
360 		/*
361 		 * We can't hold a mutex here, as the restart_streaming
362 		 * kthread may also hold it.
363 		 */
364 		mutex_unlock(&dvb->lock);
365 		cancel_work_sync(&dev->restart_streaming);
366 		mutex_lock(&dvb->lock);
367 
368 		stop_urb_transfer(dev);
369 	}
370 	mutex_unlock(&dvb->lock);
371 
372 	ret = dvb->set_frontend(fe);
373 
374 	if (was_streaming) {
375 		mutex_lock(&dvb->lock);
376 		au0828_start_transport(dev);
377 		start_urb_transfer(dev);
378 		mutex_unlock(&dvb->lock);
379 	}
380 
381 	return ret;
382 }
383 
384 static int dvb_register(struct au0828_dev *dev)
385 {
386 	struct au0828_dvb *dvb = &dev->dvb;
387 	int result;
388 
389 	dprintk(1, "%s()\n", __func__);
390 
391 	if (preallocate_big_buffers) {
392 		int i;
393 		for (i = 0; i < URB_COUNT; i++) {
394 			dev->dig_transfer_buffer[i] = kzalloc(URB_BUFSIZE,
395 					GFP_KERNEL);
396 
397 			if (!dev->dig_transfer_buffer[i]) {
398 				result = -ENOMEM;
399 
400 				pr_err("failed buffer allocation (errno = %d)\n",
401 				       result);
402 				goto fail_adapter;
403 			}
404 		}
405 	}
406 
407 	INIT_WORK(&dev->restart_streaming, au0828_restart_dvb_streaming);
408 
409 	/* register adapter */
410 	result = dvb_register_adapter(&dvb->adapter,
411 				      KBUILD_MODNAME, THIS_MODULE,
412 				      &dev->usbdev->dev, adapter_nr);
413 	if (result < 0) {
414 		pr_err("dvb_register_adapter failed (errno = %d)\n",
415 		       result);
416 		goto fail_adapter;
417 	}
418 	dvb->adapter.priv = dev;
419 
420 	/* register frontend */
421 	result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
422 	if (result < 0) {
423 		pr_err("dvb_register_frontend failed (errno = %d)\n",
424 		       result);
425 		goto fail_frontend;
426 	}
427 
428 	/* Hook dvb frontend */
429 	dvb->set_frontend = dvb->frontend->ops.set_frontend;
430 	dvb->frontend->ops.set_frontend = au0828_set_frontend;
431 
432 	/* register demux stuff */
433 	dvb->demux.dmx.capabilities =
434 		DMX_TS_FILTERING | DMX_SECTION_FILTERING |
435 		DMX_MEMORY_BASED_FILTERING;
436 	dvb->demux.priv       = dev;
437 	dvb->demux.filternum  = 256;
438 	dvb->demux.feednum    = 256;
439 	dvb->demux.start_feed = au0828_dvb_start_feed;
440 	dvb->demux.stop_feed  = au0828_dvb_stop_feed;
441 	result = dvb_dmx_init(&dvb->demux);
442 	if (result < 0) {
443 		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
444 		goto fail_dmx;
445 	}
446 
447 	dvb->dmxdev.filternum    = 256;
448 	dvb->dmxdev.demux        = &dvb->demux.dmx;
449 	dvb->dmxdev.capabilities = 0;
450 	result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
451 	if (result < 0) {
452 		pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);
453 		goto fail_dmxdev;
454 	}
455 
456 	dvb->fe_hw.source = DMX_FRONTEND_0;
457 	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
458 	if (result < 0) {
459 		pr_err("add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
460 		       result);
461 		goto fail_fe_hw;
462 	}
463 
464 	dvb->fe_mem.source = DMX_MEMORY_FE;
465 	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
466 	if (result < 0) {
467 		pr_err("add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
468 		       result);
469 		goto fail_fe_mem;
470 	}
471 
472 	result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
473 	if (result < 0) {
474 		pr_err("connect_frontend failed (errno = %d)\n", result);
475 		goto fail_fe_conn;
476 	}
477 
478 	/* register network adapter */
479 	dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
480 
481 	dvb->start_count = 0;
482 	dvb->stop_count = 0;
483 	return 0;
484 
485 fail_fe_conn:
486 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
487 fail_fe_mem:
488 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
489 fail_fe_hw:
490 	dvb_dmxdev_release(&dvb->dmxdev);
491 fail_dmxdev:
492 	dvb_dmx_release(&dvb->demux);
493 fail_dmx:
494 	dvb_unregister_frontend(dvb->frontend);
495 fail_frontend:
496 	dvb_frontend_detach(dvb->frontend);
497 	dvb_unregister_adapter(&dvb->adapter);
498 fail_adapter:
499 
500 	if (preallocate_big_buffers) {
501 		int i;
502 		for (i = 0; i < URB_COUNT; i++)
503 			kfree(dev->dig_transfer_buffer[i]);
504 	}
505 
506 	return result;
507 }
508 
509 void au0828_dvb_unregister(struct au0828_dev *dev)
510 {
511 	struct au0828_dvb *dvb = &dev->dvb;
512 
513 	dprintk(1, "%s()\n", __func__);
514 
515 	if (dvb->frontend == NULL)
516 		return;
517 
518 	cancel_work_sync(&dev->restart_streaming);
519 
520 	dvb_net_release(&dvb->net);
521 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
522 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
523 	dvb_dmxdev_release(&dvb->dmxdev);
524 	dvb_dmx_release(&dvb->demux);
525 	dvb_unregister_frontend(dvb->frontend);
526 	dvb_frontend_detach(dvb->frontend);
527 	dvb_unregister_adapter(&dvb->adapter);
528 
529 	if (preallocate_big_buffers) {
530 		int i;
531 		for (i = 0; i < URB_COUNT; i++)
532 			kfree(dev->dig_transfer_buffer[i]);
533 	}
534 	dvb->frontend = NULL;
535 }
536 
537 /* All the DVB attach calls go here, this function get's modified
538  * for each new card. No other function in this file needs
539  * to change.
540  */
541 int au0828_dvb_register(struct au0828_dev *dev)
542 {
543 	struct au0828_dvb *dvb = &dev->dvb;
544 	int ret;
545 
546 	dprintk(1, "%s()\n", __func__);
547 
548 	/* init frontend */
549 	switch (dev->boardnr) {
550 	case AU0828_BOARD_HAUPPAUGE_HVR850:
551 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
552 		dvb->frontend = dvb_attach(au8522_attach,
553 				&hauppauge_hvr950q_config,
554 				&dev->i2c_adap);
555 		if (dvb->frontend != NULL)
556 			switch (dev->board.tuner_type) {
557 			default:
558 			case TUNER_XC5000:
559 				dvb_attach(xc5000_attach, dvb->frontend,
560 					   &dev->i2c_adap,
561 					   &hauppauge_xc5000a_config);
562 				break;
563 			case TUNER_XC5000C:
564 				dvb_attach(xc5000_attach, dvb->frontend,
565 					   &dev->i2c_adap,
566 					   &hauppauge_xc5000c_config);
567 				break;
568 			}
569 		break;
570 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
571 		dvb->frontend = dvb_attach(au8522_attach,
572 				&hauppauge_hvr950q_config,
573 				&dev->i2c_adap);
574 		if (dvb->frontend != NULL)
575 			dvb_attach(mxl5007t_attach, dvb->frontend,
576 				   &dev->i2c_adap, 0x60,
577 				   &mxl5007t_hvr950q_config);
578 		break;
579 	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
580 		dvb->frontend = dvb_attach(au8522_attach,
581 				&hauppauge_woodbury_config,
582 				&dev->i2c_adap);
583 		if (dvb->frontend != NULL)
584 			dvb_attach(tda18271_attach, dvb->frontend,
585 				   0x60, &dev->i2c_adap,
586 				   &hauppauge_woodbury_tunerconfig);
587 		break;
588 	case AU0828_BOARD_DVICO_FUSIONHDTV7:
589 		dvb->frontend = dvb_attach(au8522_attach,
590 				&fusionhdtv7usb_config,
591 				&dev->i2c_adap);
592 		if (dvb->frontend != NULL) {
593 			dvb_attach(xc5000_attach, dvb->frontend,
594 				&dev->i2c_adap,
595 				&hauppauge_xc5000a_config);
596 		}
597 		break;
598 	default:
599 		pr_warn("The frontend of your DVB/ATSC card isn't supported yet\n");
600 		break;
601 	}
602 	if (NULL == dvb->frontend) {
603 		pr_err("%s() Frontend initialization failed\n",
604 		       __func__);
605 		return -1;
606 	}
607 	/* define general-purpose callback pointer */
608 	dvb->frontend->callback = au0828_tuner_callback;
609 
610 	/* register everything */
611 	ret = dvb_register(dev);
612 	if (ret < 0) {
613 		if (dvb->frontend->ops.release)
614 			dvb->frontend->ops.release(dvb->frontend);
615 		dvb->frontend = NULL;
616 		return ret;
617 	}
618 
619 	return 0;
620 }
621 
622 void au0828_dvb_suspend(struct au0828_dev *dev)
623 {
624 	struct au0828_dvb *dvb = &dev->dvb;
625 	int rc;
626 
627 	if (dvb->frontend) {
628 		if (dev->urb_streaming) {
629 			cancel_work_sync(&dev->restart_streaming);
630 			/* Stop transport */
631 			mutex_lock(&dvb->lock);
632 			stop_urb_transfer(dev);
633 			au0828_stop_transport(dev, 1);
634 			mutex_unlock(&dvb->lock);
635 			dev->need_urb_start = true;
636 		}
637 		/* suspend frontend - does tuner and fe to sleep */
638 		rc = dvb_frontend_suspend(dvb->frontend);
639 		pr_info("au0828_dvb_suspend(): Suspending DVB fe %d\n", rc);
640 	}
641 }
642 
643 void au0828_dvb_resume(struct au0828_dev *dev)
644 {
645 	struct au0828_dvb *dvb = &dev->dvb;
646 	int rc;
647 
648 	if (dvb->frontend) {
649 		/* resume frontend - does fe and tuner init */
650 		rc = dvb_frontend_resume(dvb->frontend);
651 		pr_info("au0828_dvb_resume(): Resuming DVB fe %d\n", rc);
652 		if (dev->need_urb_start) {
653 			/* Start transport */
654 			mutex_lock(&dvb->lock);
655 			au0828_start_transport(dev);
656 			start_urb_transfer(dev);
657 			mutex_unlock(&dvb->lock);
658 		}
659 	}
660 }
661